From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- ChibiOS_16.1.5/community/.gitignore | 5 - ChibiOS_16.1.5/community/AUTHORS.txt | 21 - ChibiOS_16.1.5/community/README.md | 24 - ChibiOS_16.1.5/community/demos/.keep | 0 .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject | 58 - .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project | 34 - .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile | 220 - .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h | 533 -- .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h | 381 -- .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c | 62 - .../demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h | 123 - .../KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt | 16 - .../demos/KINETIS/RT-FREEDOM-K20D50M/.cproject | 53 - .../demos/KINETIS/RT-FREEDOM-K20D50M/.project | 34 - .../demos/KINETIS/RT-FREEDOM-K20D50M/Makefile | 220 - .../demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h | 533 -- ...FREEDOM-K20D50M (OpenOCD, Flash and Run).launch | 52 - .../demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h | 381 -- .../demos/KINETIS/RT-FREEDOM-K20D50M/main.c | 85 - .../demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h | 81 - .../demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt | 16 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject | 53 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project | 34 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile | 214 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h | 533 -- ...EEDOM-KL25Z-EXT (OpenOCD, Flash and Run).launch | 52 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h | 381 -- .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c | 68 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h | 160 - .../demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt | 16 - .../demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile | 220 - .../demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h | 516 -- .../demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h | 362 - .../demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c | 83 - .../demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h | 58 - .../KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c | 72 - .../KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h | 39 - .../KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h | 139 - .../demos/KINETIS/RT-FREEDOM-KL25Z/.cproject | 53 - .../demos/KINETIS/RT-FREEDOM-KL25Z/.project | 34 - .../demos/KINETIS/RT-FREEDOM-KL25Z/Makefile | 215 - .../demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h | 533 -- ...T-FREEDOM-KL25Z (OpenOCD, Flash and Run).launch | 53 - .../demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h | 381 -- .../demos/KINETIS/RT-FREEDOM-KL25Z/main.c | 85 - .../demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h | 73 - .../demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt | 16 - .../demos/KINETIS/RT-MCHCK-K20-GPT/.cproject | 53 - .../demos/KINETIS/RT-MCHCK-K20-GPT/.project | 34 - .../demos/KINETIS/RT-MCHCK-K20-GPT/Makefile | 223 - .../demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h | 533 -- ...T-MCHCK-K20-GPT (OpenOCD, Flash and Run).launch | 53 - .../demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h | 381 -- .../demos/KINETIS/RT-MCHCK-K20-GPT/main.c | 69 - .../demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h | 83 - .../demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt | 8 - .../demos/KINETIS/RT-MCHCK-K20-SPI/.cproject | 53 - .../demos/KINETIS/RT-MCHCK-K20-SPI/.project | 34 - .../demos/KINETIS/RT-MCHCK-K20-SPI/Makefile | 223 - .../demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h | 533 -- ...T-MCHCK-K20-SPI (OpenOCD, Flash and Run).launch | 53 - .../demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h | 381 -- .../demos/KINETIS/RT-MCHCK-K20-SPI/main.c | 95 - .../demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h | 77 - .../demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt | 17 - .../community/demos/KINETIS/RT-TEENSY3/.cproject | 53 - .../community/demos/KINETIS/RT-TEENSY3/.project | 34 - .../community/demos/KINETIS/RT-TEENSY3/Makefile | 220 - .../community/demos/KINETIS/RT-TEENSY3/chconf.h | 533 -- .../RT-TEENSY3 (OpenOCD, Flash and Run).launch | 53 - .../community/demos/KINETIS/RT-TEENSY3/halconf.h | 381 -- .../community/demos/KINETIS/RT-TEENSY3/main.c | 66 - .../community/demos/KINETIS/RT-TEENSY3/mcuconf.h | 78 - .../community/demos/KINETIS/RT-TEENSY3/readme.txt | 17 - .../demos/MSP430X/NIL-EXP430FR5969/Makefile | 207 - .../demos/MSP430X/NIL-EXP430FR5969/chconf.h | 274 - .../demos/MSP430X/NIL-EXP430FR5969/halconf.h | 388 -- .../demos/MSP430X/NIL-EXP430FR5969/main.c | 76 - .../demos/MSP430X/NIL-EXP430FR5969/mcuconf.h | 55 - .../demos/MSP430X/NIL-EXP430FR5969/msp_vectors.c | 322 - .../demos/MSP430X/NIL-EXP430FR6989/Makefile | 208 - .../demos/MSP430X/NIL-EXP430FR6989/chconf.h | 274 - .../demos/MSP430X/NIL-EXP430FR6989/halconf.h | 388 -- .../demos/MSP430X/NIL-EXP430FR6989/main.c | 76 - .../demos/MSP430X/NIL-EXP430FR6989/mcuconf.h | 55 - .../demos/MSP430X/NIL-EXP430FR6989/msp_vectors.c | 322 - .../community/demos/NRF51/OSHCHIP_V1.0/Makefile | 219 - .../community/demos/NRF51/OSHCHIP_V1.0/chconf.h | 524 -- .../demos/NRF51/OSHCHIP_V1.0/debug/openocd.cfg | 4 - .../community/demos/NRF51/OSHCHIP_V1.0/halconf.h | 327 - .../community/demos/NRF51/OSHCHIP_V1.0/main.c | 81 - .../community/demos/NRF51/OSHCHIP_V1.0/mcuconf.h | 31 - .../demos/NRF51/OSHCHIP_V1.0/patch_hex.sh | 31 - .../community/demos/NRF51/OSHCHIP_V1.0/readme.txt | 21 - .../demos/NRF51/RT-WVSHARE_BLE400/Makefile | 219 - .../demos/NRF51/RT-WVSHARE_BLE400/chconf.h | 524 -- .../NRF51/RT-WVSHARE_BLE400/debug/openocd.cfg | 6 - .../demos/NRF51/RT-WVSHARE_BLE400/halconf.h | 327 - .../community/demos/NRF51/RT-WVSHARE_BLE400/main.c | 70 - .../demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h | 28 - .../demos/NRF51/RT-WVSHARE_BLE400/readme.txt | 18 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/.cproject | 56 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/.gitignore | 2 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/.project | 101 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/Makefile | 229 - .../STM32F429xI_SDRAM.ld | 89 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h | 520 -- ...DISCOVERY-DMA2D (OpenOCD, Flash and Run).launch | 52 - ...F429-DISCOVERY-DMA2D (OpenOCD, Run Only).launch | 52 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h | 387 -- .../halconf_community.h | 99 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c | 615 -- .../STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h | 380 -- .../mcuconf_community.h | 44 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/readme.txt | 29 - .../RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bin | Bin 64000 -> 0 bytes .../RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bmp | Bin 65078 -> 0 bytes .../res/wolf3d_palette.gif | Bin 22912 -> 0 bytes .../res/wolf3d_vgagraph_chunk87.c | 4005 ----------- .../res/wolf3d_vgagraph_chunk87.h | 9 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c | 314 - .../STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h | 25 - .../RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c | 277 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject | 56 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore | 2 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project | 101 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile | 227 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h | 522 -- ...ISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch | 52 - ...429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch | 52 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h | 387 -- .../halconf_community.h | 99 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c | 490 -- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h | 367 - .../mcuconf_community.h | 33 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt | 30 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c | 314 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h | 25 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject | 52 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project | 102 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile | 213 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - ...C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch | 52 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h | 294 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c | 103 - .../demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h | 144 - .../TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject | 63 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project | 54 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile | 216 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h | 509 -- ...-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch | 52 - .../TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h | 294 - .../TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h | 2127 ------ .../demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c | 56 - .../TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h | 116 - .../TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c | 120 - .../TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h | 51 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject | 51 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project | 54 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile | 212 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h | 509 -- .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h | 294 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c | 114 - .../demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h | 116 - .../demos/various/RT-Win32-TriBuf/.cproject | 50 - .../demos/various/RT-Win32-TriBuf/.gitignore | 9 - .../demos/various/RT-Win32-TriBuf/.project | 38 - .../demos/various/RT-Win32-TriBuf/Makefile | 152 - .../demos/various/RT-Win32-TriBuf/chconf.h | 502 -- .../demos/various/RT-Win32-TriBuf/halconf.h | 326 - .../community/demos/various/RT-Win32-TriBuf/main.c | 171 - .../demos/various/RT-Win32-TriBuf/readme.txt | 33 - .../demos/various/RT-Win32-TriBuf/run.bat | 2 - ChibiOS_16.1.5/community/os/.keep | 0 .../community/os/common/ext/CMSIS/KINETIS/k20x5.h | 305 - .../community/os/common/ext/CMSIS/KINETIS/k20x7.h | 362 - .../community/os/common/ext/CMSIS/KINETIS/k20xx.h | 2319 ------- .../community/os/common/ext/CMSIS/KINETIS/kl25z.h | 1100 --- .../community/os/common/ext/CMSIS/KINETIS/kl26z.h | 1169 ---- .../os/common/ext/CMSIS/KINETIS/kl27zxx.h | 1229 ---- .../os/common/ext/CMSIS/KINETIS/kl27zxxx.h | 1216 ---- .../community/os/common/ext/CMSIS/KINETIS/kl2xz.h | 1218 ---- .../ports/ARMCMx/compilers/GCC/ld/STM32F103x8.ld | 50 - .../ports/ARMCMx/compilers/GCC/ld/STM32F103xC.ld | 50 - .../community/os/common/ports/MSP430X/chcore.c | 103 - .../community/os/common/ports/MSP430X/chcore.h | 437 -- .../os/common/ports/MSP430X/chcore_timer.h | 119 - .../common/ports/MSP430X/compilers/GCC/chtypes.h | 111 - .../common/ports/MSP430X/compilers/GCC/mk/port.mk | 7 - .../startup/ARMCMx/compilers/GCC/ld/MK20DX128.ld | 101 - .../ARMCMx/compilers/GCC/ld/MK20DX128BLDR3.ld | 92 - .../ARMCMx/compilers/GCC/ld/MK20DX128BLDR4.ld | 92 - .../startup/ARMCMx/compilers/GCC/ld/MK20DX256.ld | 101 - .../ARMCMx/compilers/GCC/ld/MK20DX256BLDR8.ld | 91 - .../startup/ARMCMx/compilers/GCC/ld/MKL26Z64.ld | 101 - .../startup/ARMCMx/compilers/GCC/ld/MKL27Z256.ld | 101 - .../startup/ARMCMx/compilers/GCC/ld/MKL2xZ128.ld | 101 - .../startup/ARMCMx/compilers/GCC/ld/NRF51822.ld | 84 - .../startup/ARMCMx/compilers/GCC/ld/TM4C123xC3.ld | 84 - .../startup/ARMCMx/compilers/GCC/ld/TM4C123xD5.ld | 84 - .../startup/ARMCMx/compilers/GCC/ld/TM4C123xE6.ld | 84 - .../startup/ARMCMx/compilers/GCC/ld/TM4C123xH6.ld | 84 - .../startup/ARMCMx/compilers/GCC/ld/TM4C129xKC.ld | 84 - .../startup/ARMCMx/compilers/GCC/ld/TM4C129xNC.ld | 84 - .../ARMCMx/compilers/GCC/mk/startup_k20x.mk | 12 - .../ARMCMx/compilers/GCC/mk/startup_k20x5.mk | 3 - .../ARMCMx/compilers/GCC/mk/startup_k20x7.mk | 3 - .../ARMCMx/compilers/GCC/mk/startup_kl2x.mk | 12 - .../ARMCMx/compilers/GCC/mk/startup_nrf51.mk | 10 - .../ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk | 11 - .../ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk | 11 - .../common/startup/ARMCMx/devices/K20x5/cmparams.h | 84 - .../common/startup/ARMCMx/devices/K20x7/cmparams.h | 80 - .../common/startup/ARMCMx/devices/KL2x/cmparams.h | 92 - .../startup/ARMCMx/devices/NRF51822/cmparams.h | 82 - .../startup/ARMCMx/devices/TM4C123x/cmparams.h | 112 - .../startup/ARMCMx/devices/TM4C129x/cmparams.h | 96 - .../MSP430X/compilers/GCC/ld/msp430fr5969.ld | 390 -- .../MSP430X/compilers/GCC/ld/msp430fr6989.ld | 437 -- .../compilers/GCC/mk/startup_msp430fr5xxx.mk | 10 - .../common/startup/MSP430X/compilers/GCC/rules.mk | 269 - .../community/os/hal/boards/EXP430FR5969/board.c | 46 - .../community/os/hal/boards/EXP430FR5969/board.h | 129 - .../community/os/hal/boards/EXP430FR5969/board.mk | 5 - .../community/os/hal/boards/EXP430FR6989/board.c | 52 - .../community/os/hal/boards/EXP430FR6989/board.h | 217 - .../community/os/hal/boards/EXP430FR6989/board.mk | 5 - .../hal/boards/FREESCALE_FREEDOM_K20D50M/board.c | 127 - .../hal/boards/FREESCALE_FREEDOM_K20D50M/board.h | 70 - .../hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk | 5 - .../os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c | 127 - .../os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h | 79 - .../os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk | 5 - .../os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.c | 127 - .../os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.h | 89 - .../os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk | 5 - .../community/os/hal/boards/MCHCK_K20/board.c | 127 - .../community/os/hal/boards/MCHCK_K20/board.h | 49 - .../community/os/hal/boards/MCHCK_K20/board.mk | 5 - .../boards/NONSTANDARD_STM32F4_BARTHESS2/board.c | 108 - .../boards/NONSTANDARD_STM32F4_BARTHESS2/board.h | 1160 ---- .../boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk | 5 - .../community/os/hal/boards/NRF51-DK/board.c | 92 - .../community/os/hal/boards/NRF51-DK/board.h | 145 - .../community/os/hal/boards/NRF51-DK/board.mk | 11 - .../community/os/hal/boards/OSHCHIP_V1.0/board.c | 80 - .../community/os/hal/boards/OSHCHIP_V1.0/board.h | 64 - .../community/os/hal/boards/OSHCHIP_V1.0/board.mk | 5 - .../community/os/hal/boards/PJRC_TEENSY_3/board.c | 183 - .../community/os/hal/boards/PJRC_TEENSY_3/board.h | 295 - .../community/os/hal/boards/PJRC_TEENSY_3/board.mk | 5 - .../os/hal/boards/PJRC_TEENSY_3_1/board.c | 183 - .../os/hal/boards/PJRC_TEENSY_3_1/board.h | 295 - .../os/hal/boards/PJRC_TEENSY_3_1/board.mk | 5 - .../community/os/hal/boards/PJRC_TEENSY_LC/board.c | 177 - .../community/os/hal/boards/PJRC_TEENSY_LC/board.h | 279 - .../os/hal/boards/PJRC_TEENSY_LC/board.mk | 5 - .../os/hal/boards/ST_STM32F0308_DISCOVERY/board.c | 102 - .../os/hal/boards/ST_STM32F0308_DISCOVERY/board.h | 757 --- .../os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk | 5 - .../os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c | 71 - .../os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h | 943 --- .../os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk | 5 - .../os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c | 105 - .../os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h | 429 -- .../os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk | 5 - .../community/os/hal/boards/WVSHARE_BLE400/board.c | 85 - .../community/os/hal/boards/WVSHARE_BLE400/board.h | 128 - .../os/hal/boards/WVSHARE_BLE400/board.mk | 5 - ChibiOS_16.1.5/community/os/hal/hal.mk | 23 - .../community/os/hal/include/hal_community.h | 122 - ChibiOS_16.1.5/community/os/hal/include/hal_crc.h | 158 - .../community/os/hal/include/hal_ee24xx.h | 64 - .../community/os/hal/include/hal_ee25xx.h | 63 - .../community/os/hal/include/hal_eeprom.h | 143 - ChibiOS_16.1.5/community/os/hal/include/hal_eicu.h | 191 - ChibiOS_16.1.5/community/os/hal/include/hal_nand.h | 137 - .../community/os/hal/include/hal_onewire.h | 366 - ChibiOS_16.1.5/community/os/hal/include/hal_qei.h | 130 - ChibiOS_16.1.5/community/os/hal/include/hal_rng.h | 136 - .../community/os/hal/include/hal_timcap.h | 206 - .../community/os/hal/include/hal_usb_hid.h | 510 -- ChibiOS_16.1.5/community/os/hal/include/hal_usbh.h | 436 -- .../community/os/hal/include/usbh/debug.h | 44 - .../community/os/hal/include/usbh/defs.h | 160 - .../community/os/hal/include/usbh/desciter.h | 63 - .../community/os/hal/include/usbh/dev/ftdi.h | 154 - .../community/os/hal/include/usbh/dev/hub.h | 138 - .../community/os/hal/include/usbh/dev/msd.h | 125 - .../community/os/hal/include/usbh/internal.h | 148 - .../community/os/hal/include/usbh/list.h | 598 -- .../community/os/hal/ports/KINETIS/K20x/hal_lld.c | 234 - .../community/os/hal/ports/KINETIS/K20x/hal_lld.h | 302 - .../os/hal/ports/KINETIS/K20x/hal_pwm_lld.c | 390 -- .../os/hal/ports/KINETIS/K20x/hal_pwm_lld.h | 270 - .../os/hal/ports/KINETIS/K20x/hal_spi_lld.c | 539 -- .../os/hal/ports/KINETIS/K20x/hal_spi_lld.h | 261 - .../os/hal/ports/KINETIS/K20x/kinetis_registry.h | 258 - .../os/hal/ports/KINETIS/K20x/platform.dox | 365 - .../os/hal/ports/KINETIS/K20x/platform.mk | 18 - .../community/os/hal/ports/KINETIS/KL2x/hal_lld.c | 472 -- .../community/os/hal/ports/KINETIS/KL2x/hal_lld.h | 316 - .../os/hal/ports/KINETIS/KL2x/hal_pwm_lld.c | 388 -- .../os/hal/ports/KINETIS/KL2x/hal_pwm_lld.h | 305 - .../os/hal/ports/KINETIS/KL2x/kinetis_registry.h | 258 - .../os/hal/ports/KINETIS/KL2x/platform.mk | 17 - .../os/hal/ports/KINETIS/LLD/hal_adc_lld.c | 259 - .../os/hal/ports/KINETIS/LLD/hal_adc_lld.h | 360 - .../os/hal/ports/KINETIS/LLD/hal_ext_lld.c | 434 -- .../os/hal/ports/KINETIS/LLD/hal_ext_lld.h | 188 - .../os/hal/ports/KINETIS/LLD/hal_gpt_lld.c | 391 -- .../os/hal/ports/KINETIS/LLD/hal_gpt_lld.h | 333 - .../os/hal/ports/KINETIS/LLD/hal_i2c_lld.c | 583 -- .../os/hal/ports/KINETIS/LLD/hal_i2c_lld.h | 247 - .../os/hal/ports/KINETIS/LLD/hal_pal_lld.c | 245 - .../os/hal/ports/KINETIS/LLD/hal_pal_lld.h | 423 -- .../os/hal/ports/KINETIS/LLD/hal_serial_lld.c | 583 -- .../os/hal/ports/KINETIS/LLD/hal_serial_lld.h | 220 - .../os/hal/ports/KINETIS/LLD/hal_st_lld.c | 98 - .../os/hal/ports/KINETIS/LLD/hal_st_lld.h | 156 - .../os/hal/ports/KINETIS/LLD/hal_usb_lld.c | 832 --- .../os/hal/ports/KINETIS/LLD/hal_usb_lld.h | 428 -- .../community/os/hal/ports/MSP430X/hal_dma_lld.c | 259 - .../community/os/hal/ports/MSP430X/hal_dma_lld.h | 173 - .../community/os/hal/ports/MSP430X/hal_lld.c | 87 - .../community/os/hal/ports/MSP430X/hal_lld.h | 245 - .../community/os/hal/ports/MSP430X/hal_pal_lld.c | 229 - .../community/os/hal/ports/MSP430X/hal_pal_lld.h | 385 -- .../os/hal/ports/MSP430X/hal_serial_lld.c | 668 -- .../os/hal/ports/MSP430X/hal_serial_lld.h | 320 - .../community/os/hal/ports/MSP430X/hal_spi_lld.c | 578 -- .../community/os/hal/ports/MSP430X/hal_spi_lld.h | 642 -- .../community/os/hal/ports/MSP430X/hal_st_lld.c | 206 - .../community/os/hal/ports/MSP430X/hal_st_lld.h | 216 - .../community/os/hal/ports/MSP430X/platform.mk | 10 - .../os/hal/ports/NRF51/NRF51822/hal_adc_lld.c | 227 - .../os/hal/ports/NRF51/NRF51822/hal_adc_lld.h | 229 - .../os/hal/ports/NRF51/NRF51822/hal_ext_lld.c | 168 - .../os/hal/ports/NRF51/NRF51822/hal_ext_lld.h | 139 - .../os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c | 110 - .../os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h | 79 - .../os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c | 358 - .../os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h | 264 - .../os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c | 446 -- .../os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h | 232 - .../os/hal/ports/NRF51/NRF51822/hal_lld.c | 85 - .../os/hal/ports/NRF51/NRF51822/hal_lld.h | 102 - .../os/hal/ports/NRF51/NRF51822/hal_pal_lld.c | 158 - .../os/hal/ports/NRF51/NRF51822/hal_pal_lld.h | 347 - .../os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c | 425 -- .../os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h | 333 - .../os/hal/ports/NRF51/NRF51822/hal_rng_lld.c | 152 - .../os/hal/ports/NRF51/NRF51822/hal_rng_lld.h | 167 - .../os/hal/ports/NRF51/NRF51822/hal_serial_lld.c | 325 - .../os/hal/ports/NRF51/NRF51822/hal_serial_lld.h | 155 - .../os/hal/ports/NRF51/NRF51822/hal_spi_lld.c | 374 -- .../os/hal/ports/NRF51/NRF51822/hal_spi_lld.h | 238 - .../os/hal/ports/NRF51/NRF51822/hal_st_lld.c | 294 - .../os/hal/ports/NRF51/NRF51822/hal_st_lld.h | 275 - .../os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c | 150 - .../os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h | 127 - .../community/os/hal/ports/NRF51/NRF51822/nrf51.h | 1315 ---- .../os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h | 7088 -------------------- .../os/hal/ports/NRF51/NRF51822/nrf51_delay.h | 51 - .../os/hal/ports/NRF51/NRF51822/platform.mk | 61 - .../os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c | 328 - .../os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h | 249 - .../hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c | 3130 --------- .../hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h | 664 -- .../os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c | 191 - .../os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h | 339 - .../os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c | 211 - .../os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h | 171 - .../os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c | 156 - .../os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h | 172 - .../os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c | 515 -- .../os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h | 324 - .../os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c | 3792 ----------- .../os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h | 736 -- .../os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c | 1176 ---- .../os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h | 554 -- .../os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c | 293 - .../os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h | 347 - .../os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c | 818 --- .../os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h | 390 -- .../os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h | 929 --- .../os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c | 1604 ----- .../os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h | 153 - .../os/hal/ports/STM32/STM32F0xx/platform.mk | 9 - .../os/hal/ports/STM32/STM32F1xx/platform.mk | 15 - .../os/hal/ports/STM32/STM32F3xx/platform.mk | 10 - .../os/hal/ports/STM32/STM32F4xx/platform.mk | 21 - .../community/os/hal/ports/TIVA/LLD/hal_ext_lld.c | 981 --- .../community/os/hal/ports/TIVA/LLD/hal_ext_lld.h | 523 -- .../community/os/hal/ports/TIVA/LLD/hal_gpt_lld.c | 708 -- .../community/os/hal/ports/TIVA/LLD/hal_gpt_lld.h | 501 -- .../community/os/hal/ports/TIVA/LLD/hal_i2c_lld.c | 854 --- .../community/os/hal/ports/TIVA/LLD/hal_i2c_lld.h | 527 -- .../community/os/hal/ports/TIVA/LLD/hal_mac_lld.c | 823 --- .../community/os/hal/ports/TIVA/LLD/hal_mac_lld.h | 438 -- .../community/os/hal/ports/TIVA/LLD/hal_pal_lld.c | 445 -- .../community/os/hal/ports/TIVA/LLD/hal_pal_lld.h | 762 --- .../community/os/hal/ports/TIVA/LLD/hal_pwm_lld.c | 577 -- .../community/os/hal/ports/TIVA/LLD/hal_pwm_lld.h | 372 - .../os/hal/ports/TIVA/LLD/hal_serial_lld.c | 632 -- .../os/hal/ports/TIVA/LLD/hal_serial_lld.h | 482 -- .../community/os/hal/ports/TIVA/LLD/hal_spi_lld.c | 685 -- .../community/os/hal/ports/TIVA/LLD/hal_spi_lld.h | 388 -- .../community/os/hal/ports/TIVA/LLD/hal_st_lld.c | 253 - .../community/os/hal/ports/TIVA/LLD/hal_st_lld.h | 276 - .../community/os/hal/ports/TIVA/LLD/hal_wdg_lld.c | 244 - .../community/os/hal/ports/TIVA/LLD/hal_wdg_lld.h | 190 - .../community/os/hal/ports/TIVA/LLD/tiva_gpt.h | 135 - .../community/os/hal/ports/TIVA/LLD/tiva_udma.c | 141 - .../community/os/hal/ports/TIVA/LLD/tiva_udma.h | 195 - .../community/os/hal/ports/TIVA/TM4C123x/hal_lld.c | 142 - .../community/os/hal/ports/TIVA/TM4C123x/hal_lld.h | 362 - .../os/hal/ports/TIVA/TM4C123x/platform.mk | 18 - .../os/hal/ports/TIVA/TM4C123x/tiva_isr.h | 650 -- .../os/hal/ports/TIVA/TM4C123x/tiva_registry.h | 504 -- .../os/hal/ports/TIVA/TM4C123x/tm4c123x.h | 958 --- .../community/os/hal/ports/TIVA/TM4C129x/hal_lld.c | 152 - .../community/os/hal/ports/TIVA/TM4C129x/hal_lld.h | 376 -- .../os/hal/ports/TIVA/TM4C129x/platform.mk | 14 - .../os/hal/ports/TIVA/TM4C129x/tiva_isr.h | 569 -- .../os/hal/ports/TIVA/TM4C129x/tiva_registry.h | 368 - .../os/hal/ports/TIVA/TM4C129x/tm4c129x.h | 1131 ---- .../community/os/hal/src/hal_community.c | 87 - ChibiOS_16.1.5/community/os/hal/src/hal_crc.c | 264 - ChibiOS_16.1.5/community/os/hal/src/hal_ee24xx.c | 353 - ChibiOS_16.1.5/community/os/hal/src/hal_ee25xx.c | 404 -- ChibiOS_16.1.5/community/os/hal/src/hal_eeprom.c | 197 - ChibiOS_16.1.5/community/os/hal/src/hal_eicu.c | 153 - ChibiOS_16.1.5/community/os/hal/src/hal_nand.c | 567 -- ChibiOS_16.1.5/community/os/hal/src/hal_onewire.c | 890 --- ChibiOS_16.1.5/community/os/hal/src/hal_qei.c | 214 - ChibiOS_16.1.5/community/os/hal/src/hal_rng.c | 182 - ChibiOS_16.1.5/community/os/hal/src/hal_timcap.c | 159 - ChibiOS_16.1.5/community/os/hal/src/hal_usb_hid.c | 581 -- ChibiOS_16.1.5/community/os/hal/src/hal_usbh.c | 1395 ---- .../community/os/hal/src/usbh/hal_usbh_debug.c | 536 -- .../community/os/hal/src/usbh/hal_usbh_desciter.c | 165 - .../community/os/hal/src/usbh/hal_usbh_ftdi.c | 717 -- .../community/os/hal/src/usbh/hal_usbh_hub.c | 302 - .../community/os/hal/src/usbh/hal_usbh_msd.c | 939 --- .../community/os/hal/src/usbh/hal_usbh_uvc.c | 89 - ChibiOS_16.1.5/community/os/various/bitmap.c | 158 - ChibiOS_16.1.5/community/os/various/bitmap.h | 77 - ChibiOS_16.1.5/community/os/various/bswap.h | 201 - ChibiOS_16.1.5/community/os/various/crcsw.c | 338 - ChibiOS_16.1.5/community/os/various/crcsw.h | 215 - .../community/os/various/devices_lib/lcd/ili9341.c | 418 -- .../community/os/various/devices_lib/lcd/ili9341.h | 593 -- .../community/os/various/devices_lib/mems/l3gd20.c | 123 - .../community/os/various/devices_lib/mems/l3gd20.h | 243 - .../os/various/devices_lib/mems/lis3mdl.c | 151 - .../os/various/devices_lib/mems/lis3mdl.h | 258 - .../os/various/devices_lib/mems/lsm303dlhc.c | 205 - .../os/various/devices_lib/mems/lsm303dlhc.h | 352 - .../os/various/devices_lib/mems/lsm6ds0.c | 184 - .../os/various/devices_lib/mems/lsm6ds0.h | 482 -- .../os/various/devices_lib/others/max7219.c | 94 - .../os/various/devices_lib/others/max7219.h | 187 - .../community/os/various/devices_lib/rf/nrf24l01.c | 440 -- .../community/os/various/devices_lib/rf/nrf24l01.h | 575 -- .../os/various/devices_lib/sensors/hdc1000.c | 265 - .../os/various/devices_lib/sensors/hdc1000.h | 240 - .../os/various/devices_lib/sensors/mcp9808.c | 207 - .../os/various/devices_lib/sensors/mcp9808.h | 204 - .../os/various/devices_lib/sensors/sensor.h | 81 - .../os/various/devices_lib/sensors/tsl2561.c | 386 -- .../os/various/devices_lib/sensors/tsl2561.h | 241 - .../os/various/devices_lib/sensors/tsl2591.c | 272 - .../os/various/devices_lib/sensors/tsl2591.h | 238 - ChibiOS_16.1.5/community/os/various/gdb.mk | 13 - ChibiOS_16.1.5/community/os/various/i2c_helpers.h | 283 - ChibiOS_16.1.5/community/os/various/jlink.mk | 33 - ChibiOS_16.1.5/community/os/various/memtest.cpp | 310 - ChibiOS_16.1.5/community/os/various/memtest.h | 90 - ChibiOS_16.1.5/community/os/various/tribuf.c | 214 - ChibiOS_16.1.5/community/os/various/tribuf.h | 225 - ChibiOS_16.1.5/community/testhal/.keep | 0 .../testhal/KINETIS/FRDM-K20D50M/I2C/Makefile | 218 - .../testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h | 516 -- .../testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h | 381 -- .../testhal/KINETIS/FRDM-K20D50M/I2C/main.c | 73 - .../testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h | 83 - .../testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt | 20 - .../KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile | 225 - .../KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h | 516 -- .../KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf | 106 - .../KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h | 362 - .../testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c | 168 - .../KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h | 40 - .../KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c | 329 - .../KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h | 27 - .../testhal/KINETIS/FRDM-KL25Z/ADC/.cproject | 53 - .../testhal/KINETIS/FRDM-KL25Z/ADC/.project | 27 - .../testhal/KINETIS/FRDM-KL25Z/ADC/Makefile | 209 - .../testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h | 516 -- .../ADC/debug/RT-FREEDOM-KL25Z-ADC.launch | 31 - .../testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h | 381 -- .../testhal/KINETIS/FRDM-KL25Z/ADC/main.c | 132 - .../testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h | 78 - .../testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt | 14 - .../testhal/KINETIS/FRDM-KL25Z/GPT/Makefile | 213 - .../testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h | 514 -- .../testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h | 353 - .../testhal/KINETIS/FRDM-KL25Z/GPT/main.c | 75 - .../testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h | 42 - .../testhal/KINETIS/FRDM-KL25Z/PWM/Makefile | 213 - .../testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h | 514 -- .../testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h | 381 -- .../testhal/KINETIS/FRDM-KL25Z/PWM/main.c | 128 - .../testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h | 47 - .../KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile | 23 - .../FRDM-KL25Z/USB_HID/Client/test-usb-hid.c | 180 - .../KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules | 2 - .../testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile | 216 - .../testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h | 516 -- .../testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h | 368 - .../KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h | 142 - .../testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c | 91 - .../testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h | 63 - .../testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c | 418 -- .../testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h | 45 - .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile | 220 - .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h | 514 -- .../KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf | 106 - .../KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h | 362 - .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c | 168 - .../KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h | 53 - .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c | 329 - .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h | 27 - .../testhal/KINETIS/FRDM-KL26Z/I2C/Makefile | 212 - .../testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h | 516 -- .../testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h | 381 -- .../testhal/KINETIS/FRDM-KL26Z/I2C/main.c | 89 - .../testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h | 54 - .../testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt | 20 - .../testhal/KINETIS/FRDM-KL26Z/PWM/Makefile | 213 - .../testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h | 514 -- .../testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h | 381 -- .../testhal/KINETIS/FRDM-KL26Z/PWM/main.c | 172 - .../testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h | 58 - .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile | 220 - .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h | 514 -- .../KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf | 106 - .../KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h | 353 - .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c | 168 - .../KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h | 53 - .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c | 329 - .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h | 27 - .../community/testhal/KINETIS/KL27Z/BLINK/Makefile | 213 - .../testhal/KINETIS/KL27Z/BLINK/board/board.c | 158 - .../testhal/KINETIS/KL27Z/BLINK/board/board.h | 53 - .../testhal/KINETIS/KL27Z/BLINK/board/board.mk | 5 - .../community/testhal/KINETIS/KL27Z/BLINK/chconf.h | 516 -- .../testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh | 26 - .../testhal/KINETIS/KL27Z/BLINK/halconf.h | 187 - .../community/testhal/KINETIS/KL27Z/BLINK/main.c | 94 - .../testhal/KINETIS/KL27Z/BLINK/mcuconf.h | 79 - .../testhal/KINETIS/MCHCK/BOOTLOADER/Makefile | 222 - .../testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h | 514 -- .../testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h | 187 - .../testhal/KINETIS/MCHCK/BOOTLOADER/main.c | 77 - .../testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h | 41 - .../community/testhal/KINETIS/MCHCK/PWM/Makefile | 222 - .../community/testhal/KINETIS/MCHCK/PWM/README.md | 7 - .../community/testhal/KINETIS/MCHCK/PWM/chconf.h | 514 -- .../community/testhal/KINETIS/MCHCK/PWM/halconf.h | 353 - .../community/testhal/KINETIS/MCHCK/PWM/main.c | 116 - .../community/testhal/KINETIS/MCHCK/PWM/mcuconf.h | 41 - .../testhal/KINETIS/MCHCK/USB_SERIAL/Makefile | 228 - .../testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h | 513 -- .../testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf | 106 - .../testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h | 362 - .../testhal/KINETIS/MCHCK/USB_SERIAL/main.c | 161 - .../testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h | 49 - .../testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c | 329 - .../testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h | 27 - .../testhal/KINETIS/TEENSY3_x/ADC/Makefile | 219 - .../testhal/KINETIS/TEENSY3_x/ADC/chconf.h | 514 -- .../testhal/KINETIS/TEENSY3_x/ADC/halconf.h | 353 - .../community/testhal/KINETIS/TEENSY3_x/ADC/main.c | 135 - .../testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h | 35 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile | 219 - .../KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 | 219 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md | 8 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h | 516 -- .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c | 300 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h | 21 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h | 187 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c | 77 - .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/mcuconf.h | 51 - .../testhal/KINETIS/TEENSY3_x/EXT/Makefile | 219 - .../testhal/KINETIS/TEENSY3_x/EXT/chconf.h | 514 -- .../testhal/KINETIS/TEENSY3_x/EXT/halconf.h | 353 - .../community/testhal/KINETIS/TEENSY3_x/EXT/main.c | 74 - .../testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h | 47 - .../testhal/KINETIS/TEENSY3_x/GPT/Makefile | 219 - .../testhal/KINETIS/TEENSY3_x/GPT/chconf.h | 514 -- .../testhal/KINETIS/TEENSY3_x/GPT/halconf.h | 353 - .../community/testhal/KINETIS/TEENSY3_x/GPT/main.c | 65 - .../testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h | 35 - .../testhal/KINETIS/TEENSY3_x/PWM/Makefile | 219 - .../testhal/KINETIS/TEENSY3_x/PWM/chconf.h | 516 -- .../testhal/KINETIS/TEENSY3_x/PWM/halconf.h | 353 - .../community/testhal/KINETIS/TEENSY3_x/PWM/main.c | 116 - .../testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h | 35 - .../testhal/KINETIS/TEENSY3_x/SERIAL/Makefile | 219 - .../testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 | 219 - .../testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h | 514 -- .../testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h | 353 - .../testhal/KINETIS/TEENSY3_x/SERIAL/main.c | 81 - .../testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h | 35 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile | 225 - .../KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 | 225 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h | 513 -- .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf | 106 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h | 353 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c | 161 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h | 40 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c | 329 - .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h | 27 - .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile | 213 - .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h | 514 -- .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h | 187 - .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c | 103 - .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h | 53 - .../KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld | 105 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile | 214 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md | 7 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h | 514 -- .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c | 241 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h | 21 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h | 187 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c | 78 - .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/mcuconf.h | 53 - .../testhal/KINETIS/TEENSY_LC/PWM/Makefile | 213 - .../testhal/KINETIS/TEENSY_LC/PWM/chconf.h | 514 -- .../testhal/KINETIS/TEENSY_LC/PWM/halconf.h | 187 - .../community/testhal/KINETIS/TEENSY_LC/PWM/main.c | 120 - .../testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h | 58 - .../testhal/MSP430X/EXP430FR5969/DMA/Makefile | 206 - .../testhal/MSP430X/EXP430FR5969/DMA/chconf.h | 274 - .../testhal/MSP430X/EXP430FR5969/DMA/halconf.h | 388 -- .../testhal/MSP430X/EXP430FR5969/DMA/main.c | 293 - .../testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h | 55 - .../testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c | 316 - .../testhal/MSP430X/EXP430FR5969/SPI/Makefile | 206 - .../testhal/MSP430X/EXP430FR5969/SPI/chconf.h | 274 - .../testhal/MSP430X/EXP430FR5969/SPI/halconf.h | 388 -- .../testhal/MSP430X/EXP430FR5969/SPI/main.c | 395 -- .../testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h | 62 - .../testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c | 316 - .../community/testhal/NRF51/NRF51822/ADC/Makefile | 211 - .../community/testhal/NRF51/NRF51822/ADC/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/ADC/halconf.h | 341 - .../community/testhal/NRF51/NRF51822/ADC/main.c | 139 - .../community/testhal/NRF51/NRF51822/ADC/mcuconf.h | 25 - .../testhal/NRF51/NRF51822/ADC/readme.txt | 21 - .../community/testhal/NRF51/NRF51822/EXT/Makefile | 211 - .../community/testhal/NRF51/NRF51822/EXT/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/EXT/halconf.h | 327 - .../community/testhal/NRF51/NRF51822/EXT/main.c | 128 - .../community/testhal/NRF51/NRF51822/EXT/mcuconf.h | 24 - .../community/testhal/NRF51/NRF51822/GPT/Makefile | 211 - .../community/testhal/NRF51/NRF51822/GPT/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/GPT/halconf.h | 341 - .../community/testhal/NRF51/NRF51822/GPT/main.c | 124 - .../community/testhal/NRF51/NRF51822/GPT/mcuconf.h | 26 - .../testhal/NRF51/NRF51822/GPT/readme.txt | 19 - .../community/testhal/NRF51/NRF51822/I2C/Makefile | 211 - .../community/testhal/NRF51/NRF51822/I2C/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/I2C/halconf.h | 327 - .../community/testhal/NRF51/NRF51822/I2C/main.c | 164 - .../community/testhal/NRF51/NRF51822/I2C/mcuconf.h | 25 - .../testhal/NRF51/NRF51822/I2C/readme.txt | 21 - .../community/testhal/NRF51/NRF51822/PWM/Makefile | 232 - .../community/testhal/NRF51/NRF51822/PWM/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/PWM/halconf.h | 327 - .../community/testhal/NRF51/NRF51822/PWM/main.c | 76 - .../community/testhal/NRF51/NRF51822/PWM/mcuconf.h | 30 - .../community/testhal/NRF51/NRF51822/RNG/Makefile | 230 - .../community/testhal/NRF51/NRF51822/RNG/chconf.h | 499 -- .../community/testhal/NRF51/NRF51822/RNG/halconf.h | 178 - .../testhal/NRF51/NRF51822/RNG/halconf_community.h | 117 - .../community/testhal/NRF51/NRF51822/RNG/main.c | 118 - .../community/testhal/NRF51/NRF51822/RNG/mcuconf.h | 24 - .../testhal/NRF51/NRF51822/RNG/readme.txt | 17 - .../community/testhal/NRF51/NRF51822/SPI/Makefile | 211 - .../community/testhal/NRF51/NRF51822/SPI/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/SPI/halconf.h | 327 - .../community/testhal/NRF51/NRF51822/SPI/main.c | 152 - .../community/testhal/NRF51/NRF51822/SPI/mcuconf.h | 25 - .../testhal/NRF51/NRF51822/SPI/readme.txt | 21 - .../community/testhal/NRF51/NRF51822/WDG/Makefile | 220 - .../community/testhal/NRF51/NRF51822/WDG/chconf.h | 524 -- .../community/testhal/NRF51/NRF51822/WDG/halconf.h | 341 - .../community/testhal/NRF51/NRF51822/WDG/main.c | 61 - .../community/testhal/NRF51/NRF51822/WDG/mcuconf.h | 22 - .../testhal/NRF51/NRF51822/WDG/readme.txt | 17 - .../testhal/STM32/STM32F0xx/crc/.cproject | 49 - .../community/testhal/STM32/STM32F0xx/crc/.project | 27 - .../community/testhal/STM32/STM32F0xx/crc/Makefile | 214 - .../community/testhal/STM32/STM32F0xx/crc/chconf.h | 520 -- .../testhal/STM32/STM32F0xx/crc/halconf.h | 347 - .../STM32/STM32F0xx/crc/halconf_community.h | 118 - .../community/testhal/STM32/STM32F0xx/crc/main.c | 244 - .../testhal/STM32/STM32F0xx/crc/mcuconf.h | 166 - .../STM32/STM32F0xx/crc/mcuconf_community.h | 33 - .../testhal/STM32/STM32F0xx/crc/readme.txt | 36 - .../testhal/STM32/STM32F0xx/onewire/.cproject | 71 - .../testhal/STM32/STM32F0xx/onewire/.project | 38 - .../testhal/STM32/STM32F0xx/onewire/Makefile | 207 - .../testhal/STM32/STM32F0xx/onewire/chconf.h | 520 -- .../testhal/STM32/STM32F0xx/onewire/halconf.h | 347 - .../STM32/STM32F0xx/onewire/halconf_community.h | 98 - .../testhal/STM32/STM32F0xx/onewire/main.c | 42 - .../testhal/STM32/STM32F0xx/onewire/mcuconf.h | 161 - .../STM32/STM32F0xx/onewire/mcuconf_community.h | 17 - .../testhal/STM32/STM32F0xx/onewire/onewire_test.c | 257 - .../testhal/STM32/STM32F0xx/onewire/onewire_test.h | 28 - .../testhal/STM32/STM32F0xx/onewire/readme.txt | 32 - .../testhal/STM32/STM32F0xx/onewire/real_roms.txt | 27 - .../STM32/STM32F0xx/onewire/search_rom_synth.c | 370 - .../testhal/STM32/STM32F0xx/qei/.cproject | 49 - .../community/testhal/STM32/STM32F0xx/qei/.project | 91 - .../community/testhal/STM32/STM32F0xx/qei/Makefile | 218 - .../community/testhal/STM32/STM32F0xx/qei/chconf.h | 520 -- .../testhal/STM32/STM32F0xx/qei/halconf.h | 387 -- .../STM32/STM32F0xx/qei/halconf_community.h | 105 - .../community/testhal/STM32/STM32F0xx/qei/main.c | 53 - .../testhal/STM32/STM32F0xx/qei/mcuconf.h | 191 - .../STM32/STM32F0xx/qei/mcuconf_community.h | 30 - .../testhal/STM32/STM32F0xx/qei/readme.txt | 27 - .../testhal/STM32/STM32F1xx/onewire/.cproject | 55 - .../testhal/STM32/STM32F1xx/onewire/.project | 91 - .../testhal/STM32/STM32F1xx/onewire/Makefile | 215 - .../testhal/STM32/STM32F1xx/onewire/chconf.h | 520 -- .../testhal/STM32/STM32F1xx/onewire/halconf.h | 347 - .../STM32/STM32F1xx/onewire/halconf_community.h | 98 - .../testhal/STM32/STM32F1xx/onewire/main.c | 42 - .../testhal/STM32/STM32F1xx/onewire/mcuconf.h | 209 - .../STM32/STM32F1xx/onewire/mcuconf_community.h | 16 - .../testhal/STM32/STM32F1xx/onewire/onewire_test.c | 257 - .../testhal/STM32/STM32F1xx/onewire/onewire_test.h | 28 - .../testhal/STM32/STM32F1xx/onewire/readme.txt | 32 - .../testhal/STM32/STM32F1xx/onewire/real_roms.txt | 27 - .../STM32/STM32F1xx/onewire/search_rom_synth.c | 370 - .../testhal/STM32/STM32F1xx/qei/.cproject | 55 - .../community/testhal/STM32/STM32F1xx/qei/.project | 91 - .../community/testhal/STM32/STM32F1xx/qei/Makefile | 218 - .../community/testhal/STM32/STM32F1xx/qei/chconf.h | 520 -- .../testhal/STM32/STM32F1xx/qei/halconf.h | 387 -- .../STM32/STM32F1xx/qei/halconf_community.h | 105 - .../community/testhal/STM32/STM32F1xx/qei/main.c | 54 - .../testhal/STM32/STM32F1xx/qei/mcuconf.h | 219 - .../STM32/STM32F1xx/qei/mcuconf_community.h | 41 - .../testhal/STM32/STM32F1xx/qei/readme.txt | 27 - .../testhal/STM32/STM32F3xx/EEProm/.cproject | 49 - .../testhal/STM32/STM32F3xx/EEProm/.project | 27 - .../testhal/STM32/STM32F3xx/EEProm/Makefile | 219 - .../testhal/STM32/STM32F3xx/EEProm/chconf.h | 520 -- .../testhal/STM32/STM32F3xx/EEProm/halconf.h | 387 -- .../STM32/STM32F3xx/EEProm/halconf_community.h | 121 - .../testhal/STM32/STM32F3xx/EEProm/main.c | 99 - .../testhal/STM32/STM32F3xx/EEProm/mcuconf.h | 258 - .../STM32/STM32F3xx/EEProm/mcuconf_community.h | 45 - .../testhal/STM32/STM32F3xx/TIMCAP/.cproject | 49 - .../testhal/STM32/STM32F3xx/TIMCAP/.project | 27 - .../testhal/STM32/STM32F3xx/TIMCAP/Makefile | 219 - .../testhal/STM32/STM32F3xx/TIMCAP/chconf.h | 520 -- .../testhal/STM32/STM32F3xx/TIMCAP/halconf.h | 387 -- .../STM32/STM32F3xx/TIMCAP/halconf_community.h | 128 - .../testhal/STM32/STM32F3xx/TIMCAP/main.c | 194 - .../testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h | 258 - .../STM32/STM32F3xx/TIMCAP/mcuconf_community.h | 65 - .../testhal/STM32/STM32F4xx/EICU/EICU_F4x.config | 2 - .../testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator | 1 - .../STM32/STM32F4xx/EICU/EICU_F4x.creator.user | 156 - .../testhal/STM32/STM32F4xx/EICU/EICU_F4x.files | 3443 ---------- .../testhal/STM32/STM32F4xx/EICU/EICU_F4x.includes | 769 --- .../testhal/STM32/STM32F4xx/EICU/Makefile | 217 - .../testhal/STM32/STM32F4xx/EICU/chconf.h | 520 -- .../testhal/STM32/STM32F4xx/EICU/halconf.h | 387 -- .../STM32/STM32F4xx/EICU/halconf_community.h | 98 - .../community/testhal/STM32/STM32F4xx/EICU/main.c | 152 - .../testhal/STM32/STM32F4xx/EICU/mcuconf.h | 347 - .../STM32/STM32F4xx/EICU/mcuconf_community.h | 79 - .../testhal/STM32/STM32F4xx/EICU/readme.txt | 32 - .../testhal/STM32/STM32F4xx/FSMC_NAND/.cproject | 52 - .../testhal/STM32/STM32F4xx/FSMC_NAND/.project | 39 - .../testhal/STM32/STM32F4xx/FSMC_NAND/Makefile | 222 - .../testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h | 520 -- .../testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h | 33 - .../STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c | 108 - .../STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c | 106 - .../STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c | 160 - .../testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h | 387 -- .../STM32/STM32F4xx/FSMC_NAND/halconf_community.h | 98 - .../testhal/STM32/STM32F4xx/FSMC_NAND/main.c | 650 -- .../testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h | 347 - .../STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h | 46 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/.cproject | 52 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/.project | 39 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile | 224 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h | 520 -- .../testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h | 387 -- .../STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h | 98 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c | 279 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h | 347 - .../STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h | 48 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c | 133 - .../testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h | 49 - .../STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c | 105 - .../STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h | 40 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/.cproject | 52 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/.project | 39 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile | 224 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h | 520 -- .../testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h | 387 -- .../STM32/STM32F4xx/FSMC_SRAM/halconf_community.h | 98 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/main.c | 190 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h | 347 - .../STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h | 51 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c | 133 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h | 49 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c | 105 - .../testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h | 40 - .../testhal/STM32/STM32F4xx/USB_HOST/.cproject | 49 - .../testhal/STM32/STM32F4xx/USB_HOST/.project | 27 - .../testhal/STM32/STM32F4xx/USB_HOST/Makefile | 226 - .../testhal/STM32/STM32F4xx/USB_HOST/chconf.h | 522 -- .../testhal/STM32/STM32F4xx/USB_HOST/diskio.h | 80 - .../STM32/STM32F4xx/USB_HOST/fatfs_diskio.c | 144 - .../testhal/STM32/STM32F4xx/USB_HOST/ff.c | 4611 ------------- .../testhal/STM32/STM32F4xx/USB_HOST/ff.h | 341 - .../testhal/STM32/STM32F4xx/USB_HOST/ffconf.h | 271 - .../testhal/STM32/STM32F4xx/USB_HOST/halconf.h | 387 -- .../STM32/STM32F4xx/USB_HOST/halconf_community.h | 195 - .../testhal/STM32/STM32F4xx/USB_HOST/integer.h | 33 - .../testhal/STM32/STM32F4xx/USB_HOST/main.c | 488 -- .../testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h | 347 - .../STM32/STM32F4xx/USB_HOST/mcuconf_community.h | 66 - .../testhal/STM32/STM32F4xx/USB_HOST/readme.txt | 25 - .../testhal/STM32/STM32F4xx/onewire/.cproject | 52 - .../testhal/STM32/STM32F4xx/onewire/.project | 91 - .../testhal/STM32/STM32F4xx/onewire/Makefile | 219 - .../testhal/STM32/STM32F4xx/onewire/chconf.h | 520 -- .../testhal/STM32/STM32F4xx/onewire/halconf.h | 387 -- .../STM32/STM32F4xx/onewire/halconf_community.h | 98 - .../testhal/STM32/STM32F4xx/onewire/main.c | 42 - .../testhal/STM32/STM32F4xx/onewire/mcuconf.h | 347 - .../STM32/STM32F4xx/onewire/mcuconf_community.h | 45 - .../testhal/STM32/STM32F4xx/onewire/onewire_test.c | 257 - .../testhal/STM32/STM32F4xx/onewire/onewire_test.h | 28 - .../testhal/STM32/STM32F4xx/onewire/readme.txt | 32 - .../testhal/STM32/STM32F4xx/onewire/real_roms.txt | 27 - .../STM32/STM32F4xx/onewire/search_rom_synth.c | 370 - .../community/testhal/TIVA/TM4C123x/EXT/.cproject | 51 - .../community/testhal/TIVA/TM4C123x/EXT/.project | 106 - .../community/testhal/TIVA/TM4C123x/EXT/Makefile | 212 - .../community/testhal/TIVA/TM4C123x/EXT/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - .../TM4C123x-EXT (OpenOCD, Flash and Run).launch | 52 - .../community/testhal/TIVA/TM4C123x/EXT/halconf.h | 294 - .../community/testhal/TIVA/TM4C123x/EXT/main.c | 126 - .../community/testhal/TIVA/TM4C123x/EXT/mcuconf.h | 168 - .../community/testhal/TIVA/TM4C123x/GPT/.cproject | 51 - .../community/testhal/TIVA/TM4C123x/GPT/.project | 106 - .../community/testhal/TIVA/TM4C123x/GPT/Makefile | 212 - .../community/testhal/TIVA/TM4C123x/GPT/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - .../TM4C123x-GPT (OpenOCD, Flash and Run).launch | 52 - .../community/testhal/TIVA/TM4C123x/GPT/halconf.h | 294 - .../community/testhal/TIVA/TM4C123x/GPT/main.c | 95 - .../community/testhal/TIVA/TM4C123x/GPT/mcuconf.h | 144 - .../community/testhal/TIVA/TM4C123x/I2C/.cproject | 51 - .../community/testhal/TIVA/TM4C123x/I2C/.project | 101 - .../community/testhal/TIVA/TM4C123x/I2C/Makefile | 214 - .../community/testhal/TIVA/TM4C123x/I2C/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - .../TM4C123x-I2C (OpenOCD, Flash and Run).launch | 52 - .../community/testhal/TIVA/TM4C123x/I2C/halconf.h | 294 - .../community/testhal/TIVA/TM4C123x/I2C/main.c | 127 - .../community/testhal/TIVA/TM4C123x/I2C/mcuconf.h | 144 - .../community/testhal/TIVA/TM4C123x/PWM/.cproject | 51 - .../community/testhal/TIVA/TM4C123x/PWM/.project | 106 - .../community/testhal/TIVA/TM4C123x/PWM/Makefile | 212 - .../community/testhal/TIVA/TM4C123x/PWM/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - .../TM4C123x-PWM (OpenOCD, Flash and Run).launch | 52 - .../community/testhal/TIVA/TM4C123x/PWM/halconf.h | 294 - .../community/testhal/TIVA/TM4C123x/PWM/main.c | 126 - .../community/testhal/TIVA/TM4C123x/PWM/mcuconf.h | 144 - .../community/testhal/TIVA/TM4C123x/SPI/.cproject | 51 - .../community/testhal/TIVA/TM4C123x/SPI/.project | 106 - .../community/testhal/TIVA/TM4C123x/SPI/Makefile | 212 - .../community/testhal/TIVA/TM4C123x/SPI/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - .../TM4C123x-SPI (OpenOCD, Flash and Run).launch | 52 - .../community/testhal/TIVA/TM4C123x/SPI/halconf.h | 294 - .../community/testhal/TIVA/TM4C123x/SPI/main.c | 140 - .../community/testhal/TIVA/TM4C123x/SPI/mcuconf.h | 168 - .../community/testhal/TIVA/TM4C123x/WDG/.cproject | 51 - .../community/testhal/TIVA/TM4C123x/WDG/.project | 101 - .../community/testhal/TIVA/TM4C123x/WDG/Makefile | 212 - .../community/testhal/TIVA/TM4C123x/WDG/chconf.h | 509 -- ... (prompts for .cfg target configuration).launch | 10 - .../TM4C123x-WDG (OpenOCD, Flash and Run).launch | 52 - .../community/testhal/TIVA/TM4C123x/WDG/halconf.h | 301 - .../community/testhal/TIVA/TM4C123x/WDG/main.c | 83 - .../community/testhal/TIVA/TM4C123x/WDG/mcuconf.h | 174 - 916 files changed, 230916 deletions(-) delete mode 100644 ChibiOS_16.1.5/community/.gitignore delete mode 100644 ChibiOS_16.1.5/community/AUTHORS.txt delete mode 100644 ChibiOS_16.1.5/community/README.md delete mode 100644 ChibiOS_16.1.5/community/demos/.keep delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/debug/RT-FREEDOM-K20D50M (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/debug/RT-FREEDOM-KL25Z (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/debug/RT-MCHCK-K20-SPI (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.project delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/debug/RT-TEENSY3 (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/msp_vectors.c delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/msp_vectors.c delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/debug/openocd.cfg delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/patch_hex.sh delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/debug/openocd.cfg delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.gitignore delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.project delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/STM32F429xI_SDRAM.ld delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Run Only).launch delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bin delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bmp delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_palette.gif delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.gitignore delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.project delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/run.bat delete mode 100644 ChibiOS_16.1.5/community/os/.keep delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x5.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x7.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20xx.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/kl25z.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/kl26z.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/kl27zxx.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/kl27zxxx.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/kl2xz.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/ARMCMx/compilers/GCC/ld/STM32F103x8.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/ARMCMx/compilers/GCC/ld/STM32F103xC.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.c delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore_timer.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/chtypes.h delete mode 100644 ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/mk/port.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR3.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR4.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256BLDR8.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL26Z64.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL27Z256.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL2xZ128.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/NRF51822.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xC3.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xD5.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xE6.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xH6.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xKC.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xNC.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x5/cmparams.h delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x7/cmparams.h delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/KL2x/cmparams.h delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/NRF51822/cmparams.h delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr5969.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr6989.ld delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk delete mode 100644 ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/rules.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/hal.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_community.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_crc.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_ee24xx.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_ee25xx.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_eeprom.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_eicu.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_nand.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_onewire.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_qei.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_rng.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_timcap.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_usb_hid.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/hal_usbh.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/debug.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/defs.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/desciter.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/dev/ftdi.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/dev/hub.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/dev/msd.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/internal.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/include/usbh/list.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/kinetis_registry.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.dox delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/kinetis_registry.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/MSP430X/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F0xx/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F1xx/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F3xx/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F4xx/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_gpt.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/platform.mk delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_community.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_crc.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_ee24xx.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_ee25xx.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_eeprom.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_eicu.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_nand.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_onewire.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_qei.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_rng.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_timcap.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_usb_hid.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/hal_usbh.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_debug.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_desciter.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_ftdi.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_hub.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_msd.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_uvc.c delete mode 100644 ChibiOS_16.1.5/community/os/various/bitmap.c delete mode 100644 ChibiOS_16.1.5/community/os/various/bitmap.h delete mode 100644 ChibiOS_16.1.5/community/os/various/bswap.h delete mode 100644 ChibiOS_16.1.5/community/os/various/crcsw.c delete mode 100644 ChibiOS_16.1.5/community/os/various/crcsw.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/sensor.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.h delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.c delete mode 100644 ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.h delete mode 100644 ChibiOS_16.1.5/community/os/various/gdb.mk delete mode 100644 ChibiOS_16.1.5/community/os/various/i2c_helpers.h delete mode 100644 ChibiOS_16.1.5/community/os/various/jlink.mk delete mode 100644 ChibiOS_16.1.5/community/os/various/memtest.cpp delete mode 100644 ChibiOS_16.1.5/community/os/various/memtest.h delete mode 100644 ChibiOS_16.1.5/community/os/various/tribuf.c delete mode 100644 ChibiOS_16.1.5/community/os/various/tribuf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/.keep delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/onewire_test.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/real_roms.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/search_rom_synth.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/onewire_test.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/real_roms.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/search_rom_synth.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.config delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator.user delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.files delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.includes delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/diskio.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/integer.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/onewire_test.h delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/readme.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/real_roms.txt delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/search_rom_synth.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/TM4C123x-GPT (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/TM4C123x-I2C (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/TM4C123x-PWM (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/TM4C123x-SPI (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.cproject delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.project delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/Makefile delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/chconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/TM4C123x-WDG (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/halconf.h delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/main.c delete mode 100644 ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/mcuconf.h (limited to 'ChibiOS_16.1.5/community') diff --git a/ChibiOS_16.1.5/community/.gitignore b/ChibiOS_16.1.5/community/.gitignore deleted file mode 100644 index 7cc5e99..0000000 --- a/ChibiOS_16.1.5/community/.gitignore +++ /dev/null @@ -1,5 +0,0 @@ -*.origin -*.swp -*~ -.dep -build diff --git a/ChibiOS_16.1.5/community/AUTHORS.txt b/ChibiOS_16.1.5/community/AUTHORS.txt deleted file mode 100644 index 0db2323..0000000 --- a/ChibiOS_16.1.5/community/AUTHORS.txt +++ /dev/null @@ -1,21 +0,0 @@ -Joel Bodenmann aka Tectu -https://github.com/Tectu -Git repository maintainer - -Uladzimir Pylinsky aka barthess -https://github.com/barthess -Git repository maintainer - -Marco Veeneman aka Marco -https://github.com/marcoveeneman -Maintainer of the ChibiOS port for the Texas Instruments -Tiva C Series Microcontrollers - -Fabien Poussin aka fpoussin -https://github.com/fpoussin - -Matthias Blaicher aka mabl -https://github.com/mabl - -Andrea Zoppi aka TexZK -https://github.com/TexZK diff --git a/ChibiOS_16.1.5/community/README.md b/ChibiOS_16.1.5/community/README.md deleted file mode 100644 index 913b1e7..0000000 --- a/ChibiOS_16.1.5/community/README.md +++ /dev/null @@ -1,24 +0,0 @@ -ChibiOS-Contrib -=============== -Code under this directory is not part of the core ChibiOS project -and the copyright is retained by the original authors. See copyright -notes in file headers. - -Code is maintained via Github https://github.com/ChibiOS/ChibiOS-Contrib -Feel free to send pull request there. - -#### Using - -```bash -# git clone git@github.com:Chibios/ChibiOS.git ChibiOS-RT -# git clone git@github.com:ChibiOS/ChibiOS-Contrib.git ChibiOS-Contrib -``` -Note: this repos cloned in the same directory side by side (not inside). - -#### Useful links - -https://help.github.com/ - -http://git-scm.com/ - -http://chibios.org/dokuwiki/doku.php?id=chibios:guides:style_guide diff --git a/ChibiOS_16.1.5/community/demos/.keep b/ChibiOS_16.1.5/community/demos/.keep deleted file mode 100644 index e69de29..0000000 diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject deleted file mode 100644 index ee537ea..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject +++ /dev/null @@ -1,58 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project deleted file mode 100644 index f885570..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-FREEDOM-K20D50M-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile deleted file mode 100644 index c8818bf..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h deleted file mode 100644 index 80ff745..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c deleted file mode 100644 index a329884..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* Triggered when the button is pressed. The blue led is toggled. */ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - (void)extp; - (void)channel; - - palTogglePad(IOPORT4, 4); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1, PORTA, 1} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPad(IOPORT3, 3); // Red - palSetPad(IOPORT4, 4); // Green - palSetPad(IOPORT1, 2); // Blue - - /* - * Activates the EXT driver 1. - */ - palSetPadMode(IOPORT1, 1, PAL_MODE_INPUT_PULLUP); - extStart(&EXTD1, &extcfg); - - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h deleted file mode 100644 index 4a1adfc..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -/* Enable clock initialization by HAL */ -#define KINETIS_NO_INIT FALSE - -/* PEE mode - external (8 MHz) crystal with PLL for 48 MHz core/system clock. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~48MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV2 1 /* Divide by 1 for (~48MHz) peripheral clock */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~24MHz) flash clock */ -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * EXTI driver system settings. - */ -#define KINETIS_EXTI_NUM_CHANNELS 1 -#define KINETIS_EXT_PORTA_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTB_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTC_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTD_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTE_IRQ_PRIORITY 3 - -/* - * Processor specific widths of each port. - * Smaller numbers can be used if only lower pins in a port are being used to - * generate interrupts. Can be set to 0 if a port is unused. - */ - - -#if 0 -/* MK20 48pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 18 -#define KINETIS_EXT_PORTC_WIDTH 8 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 0 -#endif - -/* MK20 64pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 20 -#define KINETIS_EXT_PORTC_WIDTH 12 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 2 - -#if 0 -/* MK20 144pin */ -#define KINETIS_EXT_PORTA_WIDTH 30 -#define KINETIS_EXT_PORTB_WIDTH 24 -#define KINETIS_EXT_PORTC_WIDTH 20 -#define KINETIS_EXT_PORTD_WIDTH 16 -#define KINETIS_EXT_PORTE_WIDTH 13 -#endif - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt deleted file mode 100644 index 8d6d4ee..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt +++ /dev/null @@ -1,16 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 Freedom Board K20D50M. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Freescale Freedom K20D50M board. - -** The Demo ** - -Generates an interrupt from an external button on PTA1. Assumes a button -is connected between PTA1 and ground. Uses the internal pullup on PTA1. - -When the button is pressed the green led will toggle. - -** Build Procedure ** diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.cproject deleted file mode 100644 index 4e3f475..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.project deleted file mode 100644 index 2f05226..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-FREEDOM-K20D50M - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile deleted file mode 100644 index c8818bf..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/debug/RT-FREEDOM-K20D50M (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/debug/RT-FREEDOM-K20D50M (OpenOCD, Flash and Run).launch deleted file mode 100644 index 76b65e2..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/debug/RT-FREEDOM-K20D50M (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h deleted file mode 100644 index dddc44d..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/main.c deleted file mode 100644 index 558e7ad..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/main.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("RedBlinker"); - while (true) { - palTogglePad(IOPORT3, 3); - chThdSleepMilliseconds(300); - } -} - -static THD_WORKING_AREA(waThread2, 64); -static THD_FUNCTION(Thread2, arg) { - - (void)arg; - chRegSetThreadName("GreenBlinker"); - while (true) { - palTogglePad(IOPORT4, 4); - chThdSleepMilliseconds(600); - } -} - -static THD_WORKING_AREA(waThread3, 64); -static THD_FUNCTION(Thread3, arg) { - - (void)arg; - chRegSetThreadName("BlueBlinker"); - while (true) { - palTogglePad(IOPORT1, 2); - chThdSleepMilliseconds(900); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates serial 1 (UART0) using the driver default configuration. - */ - sdStart(&SD1, NULL); - - /* - * Creates the blinker threads. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL); - chThdCreateStatic(waThread3, sizeof(waThread3), NORMALPRIO, Thread3, NULL); - - test_execute((BaseSequentialStream *)&SD1); - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h deleted file mode 100644 index 44d2e79..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -/* Enable clock initialization by HAL */ -#define KINETIS_NO_INIT FALSE - -/* PEE mode - external 8 MHz crystal with PLL for 48 MHz core/system clock. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode - 48 MHz with internal 32.768 kHz oscillator */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~48MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV2 1 /* Divide by 1 for (~48MHz) peripheral clock */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~24MHz) flash clock */ -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt deleted file mode 100644 index 449b616..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt +++ /dev/null @@ -1,16 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 Freedom Board K20D50M. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Freescale Freedom K20D50M board. - -** The Demo ** - - -** Build Procedure ** - -The demo has been tested by using the free Codesourcery GCC-based toolchain -and YAGARTO. just modify the TRGT line in the makefile in order to use -different GCC toolchains. diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject deleted file mode 100644 index 4e3f475..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project deleted file mode 100644 index c5916b2..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-FREEDOM-KL25Z-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile deleted file mode 100644 index 0ce214c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile +++ /dev/null @@ -1,214 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 566720f..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h deleted file mode 100644 index bed5bcb..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c deleted file mode 100644 index e90cf8c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* Triggered when the button is pressed. The blue led is toggled. */ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - (void)extp; - (void)channel; - - palTogglePad(IOPORT4, 1); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1, PORTA, 1} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates serial 1 (UART0) using the driver default configuration. - */ - sdStart(&SD1, NULL); - - /* Turn the LEDs OFF */ - palSetPad(IOPORT2, 18); - palSetPad(IOPORT2, 19); - palSetPad(IOPORT4, 1); - - /* - * Activates the EXT driver 1. - */ - palSetPadMode(IOPORT1, 1, PAL_MODE_INPUT_PULLUP); - extStart(&EXTD1, &extcfg); - - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h deleted file mode 100644 index 9118e7b..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ -/* The defaults are MCG_MODE_PEE, SYSCLK 48MHz, PLLCLK 96MHz, BUSCLK 24MHz */ - -/* PEE mode - 48MHz system clock driven by external crystal. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode - ~24MHz */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz * 732 (~24 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~24MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~12MHz) bus/flash clock */ -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * EXTI driver system settings. - */ -#define KINETIS_EXTI_NUM_CHANNELS 1 -#define KINETIS_EXT_PORTA_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTB_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTC_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTD_IRQ_PRIORITY 3 -#define KINETIS_EXT_PORTE_IRQ_PRIORITY 3 - -/* - * Processor specific widths of each port. - * Smaller numbers can be used if only lower pins in a port are being used to - * generate interrupts. Can be set to 0 if a port is unused. - */ - - -#if 0 -/* MK20 48pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 18 -#define KINETIS_EXT_PORTC_WIDTH 8 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 0 -#endif - -#if 0 -/* MK20 64pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 20 -#define KINETIS_EXT_PORTC_WIDTH 12 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 2 -#endif - -#if 0 -/* MK20 144pin */ -#define KINETIS_EXT_PORTA_WIDTH 30 -#define KINETIS_EXT_PORTB_WIDTH 24 -#define KINETIS_EXT_PORTC_WIDTH 20 -#define KINETIS_EXT_PORTD_WIDTH 16 -#define KINETIS_EXT_PORTE_WIDTH 13 -#endif - - -#if 0 -/* KL25 32pin */ -#define KINETIS_EXT_PORTA_WIDTH 21 -#define KINETIS_EXT_PORTD_WIDTH 8 -#endif - -#if 0 -/* KL25 48pin */ -#define KINETIS_EXT_PORTA_WIDTH 21 -#define KINETIS_EXT_PORTD_WIDTH 8 -#endif - -#if 0 -/* KL25 64pin */ -#define KINETIS_EXT_PORTA_WIDTH 21 -#define KINETIS_EXT_PORTD_WIDTH 8 -#endif - -/* KL25 80pin */ -#define KINETIS_EXT_PORTA_WIDTH 21 -#define KINETIS_EXT_PORTD_WIDTH 8 - -#ifndef KINETIS_EXT_PORTA_WIDTH -#define KINETIS_EXT_PORTA_WIDTH 0 -#endif - -#ifndef KINETIS_EXT_PORTB_WIDTH -#define KINETIS_EXT_PORTB_WIDTH 0 -#endif - -#ifndef KINETIS_EXT_PORTC_WIDTH -#define KINETIS_EXT_PORTC_WIDTH 0 -#endif - -#ifndef KINETIS_EXT_PORTD_WIDTH -#define KINETIS_EXT_PORTD_WIDTH 0 -#endif - -#ifndef KINETIS_EXT_PORTE_WIDTH -#define KINETIS_EXT_PORTE_WIDTH 0 -#endif - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt deleted file mode 100644 index fd28dd8..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt +++ /dev/null @@ -1,16 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 Freedom Board KL25Z. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Freescale Freedom KL25Z board. - -** The Demo ** - -Generates an interrupt from an external button on PTA1. Assumes a button -is connected between PTA1 and ground. Uses the internal pullup on PTA1. - -When the button is pressed the blue led will toggle. - -** Build Procedure ** diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile deleted file mode 100644 index b9dd9f7..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 --specs=nosys.specs -lnosys -D SHELL_CONFIG_FILE -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = ../../.. -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - shellcfg.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h deleted file mode 100644 index c78e879..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked jus * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** -t before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h deleted file mode 100644 index cffae66..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/halconf.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 8 -#endif -/** @} */ - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c deleted file mode 100644 index 0f4da4d..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/main.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#include "shellcfg.h" - -SerialConfig s0cfg = { - 115200 -}; - -/* - * Blue LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - systime_t time = 500; - - (void)arg; - - chRegSetThreadName("blinker"); - while (true) { - palTogglePad(GPIO_LED_BLUE, PIN_LED_BLUE); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - sdStart(&SD1, &s0cfg); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); - - while (true) { - if (SD1.state == SD_READY) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg); - chThdWait(shelltp); /* Waiting termination. */ - } - palTogglePad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h deleted file mode 100644 index 8d5ef1c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/mcuconf.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 0 -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 1 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * I2C driver system settings. - */ -#define KINETIS_I2C_USE_I2C0 TRUE - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c deleted file mode 100644 index 253043d..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file common/shellcfg.c - * @brief CLI shell config. - * - * @addtogroup SHELL - * @{ - */ -#include - -#include "hal.h" -#include "shell.h" -#include "chprintf.h" - -char ** endptr; - -/* - * Shell history buffer - */ -char history_buffer[SHELL_MAX_HIST_BUFF]; - -/* - * Shell completion buffer - */ -char *completion_buffer[SHELL_MAX_COMPLETIONS]; - -/* - * Shell commands - */ -static void cmd_argt(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n; - - if (argc > 1) { - chprintf(chp, "Usage: arg_test arg\r\n"); - return; - } - n = strtol(argv[0], endptr, 0); - chprintf(chp, "Argument is: %u\r\n", n); -} - -static const ShellCommand commands[] = { - {"arg_test", cmd_argt}, - {NULL, NULL} -}; - -/* - * Shell configuration - */ -const ShellConfig shell_cfg = { - (BaseSequentialStream *)&SD1, - commands, - history_buffer, - sizeof(history_buffer), - completion_buffer -}; - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h deleted file mode 100644 index cbb2e44..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellcfg.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file common/shellcfg.h - * @brief CLI shell config header. - * - * @addtogroup SHELL - * @{ - */ - -#ifndef SHELLCFG_H -#define SHELLCFG_H - -#include "shell.h" - -/* - * Shell Thread size - */ -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -extern ShellConfig shell_cfg; - -#endif /* SHELLCFG_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h deleted file mode 100644 index 5ad71c0..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z-SHELL/shellconf.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file shellconf.h - * @brief Simple CLI shell configuration header. - * - * @addtogroup SHELL - * @{ - */ - -#ifndef SHELLCONF_H -#define SHELLCONF_H - -/** - * @brief Shell maximum input line length. - */ -#if !defined(SHELL_MAX_LINE_LENGTH) || defined(__DOXYGEN__) -#define SHELL_MAX_LINE_LENGTH 64 -#endif - -/** - * @brief Shell maximum arguments per command. - */ -#if !defined(SHELL_MAX_ARGUMENTS) || defined(__DOXYGEN__) -#define SHELL_MAX_ARGUMENTS 4 -#endif - -/** - * @brief Shell maximum command history. - */ -#if !defined(SHELL_MAX_HIST_BUFF) || defined(__DOXYGEN__) -#define SHELL_MAX_HIST_BUFF 8 * SHELL_MAX_LINE_LENGTH -#endif - -/** - * @brief Enable shell command history - */ -#if !defined(SHELL_USE_HISTORY) || defined(__DOXYGEN__) -#define SHELL_USE_HISTORY TRUE -#endif - -/** - * @brief Enable shell command completion - */ -#if !defined(SHELL_USE_COMPLETION) || defined(__DOXYGEN__) -#define SHELL_USE_COMPLETION TRUE -#endif - -/** - * @brief Shell Maximum Completions (Set to max commands with common prefix) - */ -#if !defined(SHELL_MAX_COMPLETIONS) || defined(__DOXYGEN__) -#define SHELL_MAX_COMPLETIONS 8 -#endif - -/** - * @brief Enable shell escape sequence processing - */ -#if !defined(SHELL_USE_ESC_SEQ) || defined(__DOXYGEN__) -#define SHELL_USE_ESC_SEQ TRUE -#endif - -/*===========================================================================*/ -/* Shell command settings */ -/*===========================================================================*/ - -/** - * @brief Enable shell exit command - */ -#if !defined(SHELL_CMD_EXIT_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_EXIT_ENABLED TRUE -#endif - -/** - * @brief Enable shell info command - */ -#if !defined(SHELL_CMD_INFO_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_INFO_ENABLED TRUE -#endif - -/** - * @brief Enable shell echo command - */ -#if !defined(SHELL_CMD_ECHO_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_ECHO_ENABLED TRUE -#endif - -/** - * @brief Enable shell systime command - */ -#if !defined(SHELL_CMD_SYSTIME_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_SYSTIME_ENABLED TRUE -#endif - -/** - * @brief Enable shell mem command - */ -#if !defined(SHELL_CMD_MEM_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_MEM_ENABLED TRUE -#endif - -/** - * @brief Enable shell threads command - */ -#if !defined(SHELL_CMD_THREADS_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_THREADS_ENABLED TRUE -#endif - -/** - * @brief Enable shell test command - */ -#if !defined(SHELL_CMD_TEST_ENABLED) || defined(__DOXYGEN__) -#define SHELL_CMD_TEST_ENABLED TRUE -#endif - -/** - * @brief Define test thread working area - */ -#if !defined(SHELL_CMD_TEST_WA_SIZE) || defined(__DOXYGEN__) -#define SHELL_CMD_TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) -#endif - -#endif /* SHELLCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.cproject deleted file mode 100644 index 4e3f475..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.project deleted file mode 100644 index 941734c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-FREEDOM-KL25Z - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile deleted file mode 100644 index 00ca08c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile +++ /dev/null @@ -1,215 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/debug/RT-FREEDOM-KL25Z (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/debug/RT-FREEDOM-KL25Z (OpenOCD, Flash and Run).launch deleted file mode 100644 index a4f4bdb..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/debug/RT-FREEDOM-KL25Z (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h deleted file mode 100644 index dddc44d..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/main.c deleted file mode 100644 index 479356c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/main.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("RedBlinker"); - while (true) { - palTogglePad(IOPORT2, 18); - chThdSleepMilliseconds(300); - } -} - -static THD_WORKING_AREA(waThread2, 64); -static THD_FUNCTION(Thread2, arg) { - - (void)arg; - chRegSetThreadName("GreenBlinker"); - while (true) { - palTogglePad(IOPORT2, 19); - chThdSleepMilliseconds(600); - } -} - -static THD_WORKING_AREA(waThread3, 64); -static THD_FUNCTION(Thread3, arg) { - - (void)arg; - chRegSetThreadName("BlueBlinker"); - while (true) { - palTogglePad(IOPORT4, 1); - chThdSleepMilliseconds(900); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates serial 1 (UART0) using the driver default configuration. - */ - sdStart(&SD1, NULL); - - /* - * Creates the blinker threads. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL); - chThdCreateStatic(waThread3, sizeof(waThread3), NORMALPRIO, Thread3, NULL); - - test_execute((BaseSequentialStream *)&SD1); - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h deleted file mode 100644 index d4aa072..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ -/* The defaults are MCG_MODE_PEE, SYSCLK 48MHz, PLLCLK 96MHz, BUSCLK 24MHz */ - -/* PEE mode - 48MHz system clock driven by external crystal. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode - ~24MHz */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz * 732 (~24 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~24MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~12MHz) bus/flash clock */ -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt deleted file mode 100644 index c43e6b8..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt +++ /dev/null @@ -1,16 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M0+ Freedom Board KL25Z. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Freescale Freedom KL25Z board. - -** The Demo ** - - -** Build Procedure ** - -The demo has been tested by using the free Codesourcery GCC-based toolchain -and YAGARTO. just modify the TRGT line in the makefile in order to use -different GCC toolchains. diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject deleted file mode 100644 index 7173b13..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.project deleted file mode 100644 index c93217c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-MCHCK-K20-GPT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile deleted file mode 100644 index 5039ff3..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile +++ /dev/null @@ -1,223 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader -LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, -# 0xc00 for a 3k bootloader -UDEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 8aca95c..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h deleted file mode 100644 index 5bd3910..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/main.c deleted file mode 100644 index 201f1b1..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/main.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define POLLED_TEST FALSE - -void gptcb(GPTDriver *gptp) { - - (void)gptp; - - palTogglePad(GPIOB, GPIOB_LED); -} - -/* - * GPT configuration structure. - */ -static const GPTConfig gpt1cfg = { - 4, - gptcb -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the GPT driver 1. - */ - gptStart(&GPTD1, &gpt1cfg); - -#if !POLLED_TEST - gptStartContinuous(&GPTD1, 2); -#endif - - while (1) { -#if POLLED_TEST - gpt_lld_polled_delay(&GPTD1, 1) ; - palTogglePad(GPIOB, GPIOB_LED); -#else - chThdSleepMilliseconds(500); -#endif - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h deleted file mode 100644 index eace87f..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -#define KINETIS_NO_INIT FALSE - -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 2 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY/KINETIS_CLKDIV1_OUTDIV2) -#define KINETIS_FLASHCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY/KINETIS_CLKDIV1_OUTDIV4) - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * SPI driver system settings. - */ -#define KINETIS_SPI_USE_SPI0 FALSE -#define KINETIS_SPI_SPI0_IRQ_PRIORITY 8 - -/* - * GPT driver system settings. - */ -#define KINETIS_GPT_USE_PIT0 TRUE -#define KINETIS_GPT_PIT0_IRQ_PRIORITY 8 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt deleted file mode 100644 index 2e6aa57..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt +++ /dev/null @@ -1,8 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 MCHCK K20 . ** -***************************************************************************** - -** TARGET ** - -The demo runs on an MKHCK K20 board. It use the PIT to implement the ChibiOS -GPT functionality. diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.cproject deleted file mode 100644 index 7173b13..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.project deleted file mode 100644 index d08ecde..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-MCHCK-K20-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile deleted file mode 100644 index 5039ff3..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile +++ /dev/null @@ -1,223 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader -LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, -# 0xc00 for a 3k bootloader -UDEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/debug/RT-MCHCK-K20-SPI (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/debug/RT-MCHCK-K20-SPI (OpenOCD, Flash and Run).launch deleted file mode 100644 index 5a369c7..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/debug/RT-MCHCK-K20-SPI (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h deleted file mode 100644 index 669f33b..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/main.c deleted file mode 100644 index 9094759..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/main.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -void spicb(SPIDriver *spip) { - - (void)spip; - - palClearPad(GPIOB, GPIOB_LED); -} - -/* - * SPI1 configuration structure. - */ -static const SPIConfig spi1cfg = { - spicb, - /* HW dependent part.*/ - GPIOC, - 0, - KINETIS_SPI_TAR_8BIT_SLOW -}; - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - static uint8_t txbuf[5]; - static uint8_t rxbuf[5]; - - (void)arg; - chRegSetThreadName("Blinker"); - while (true) { - palSetPad(GPIOB, GPIOB_LED); - - /* Send the Manufacturer and Device ID Read command */ - txbuf[0] = 0x9F; - - spiSelect(&SPID1); - spiExchange(&SPID1, sizeof(txbuf), txbuf, rxbuf); - spiUnselect(&SPID1); - - chThdSleepMilliseconds(1000); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates SPID1. Slave select is configured on GPIOC pin 0. - */ - palSetPadMode(GPIOC, 5, PAL_MODE_ALTERNATIVE_2); /* SCK */ - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATIVE_2); /* MOSI */ - palSetPadMode(GPIOD, 3, PAL_MODE_ALTERNATIVE_2); /* MISO */ - palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); /* SS */ - - /* - * Initializes the SPI driver 1. - */ - spiStart(&SPID1, &spi1cfg); - - /* - * Creates the blinker threads. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h deleted file mode 100644 index 81cd6cc..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -#define KINETIS_NO_INIT FALSE - -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 2 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY/KINETIS_CLKDIV1_OUTDIV2) -#define KINETIS_FLASHCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY/KINETIS_CLKDIV1_OUTDIV4) - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * SPI driver system settings. - */ -#define KINETIS_SPI_USE_SPI0 TRUE -#define KINETIS_SPI_SPI0_IRQ_PRIORITY 8 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt deleted file mode 100644 index 705c922..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 MCHCK K20 . ** -***************************************************************************** - -** TARGET ** - -The demo runs on an MKHCK K20 board. It use the SPI bus to send the -Manufacturer and Device ID Read command (0x9f) and to read the returned -data from a standard SPI data flash device. It has been tested with -an AT45DB081. - -The pin connections are - - C5 is connected to SCK - C6 is connected to MOSI - D3 is connected to MISO - C0 is connected to SS diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.cproject b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.cproject deleted file mode 100644 index 7173b13..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.project b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.project deleted file mode 100644 index 47a9b9f..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/.project +++ /dev/null @@ -1,34 +0,0 @@ - - - RT-TEENSY3 - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/Makefile b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/Makefile deleted file mode 100644 index 5f23627..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/chconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/chconf.h deleted file mode 100644 index 1eaf053..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_NONE. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/debug/RT-TEENSY3 (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/debug/RT-TEENSY3 (OpenOCD, Flash and Run).launch deleted file mode 100644 index 78add7a..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/debug/RT-TEENSY3 (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/halconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/halconf.h deleted file mode 100644 index dddc44d..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/main.c b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/main.c deleted file mode 100644 index 42d6510..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/main.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -/* - * LED blinker thread. - */ -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("LEDBlinker"); - while (true) { - palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates serial 1 (UART0) using the driver default configuration. - */ - sdStart(&SD1, NULL); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - test_execute((BaseSequentialStream *)&SD1); - while (true) { - chThdSleepMilliseconds(1000); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/mcuconf.h b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/mcuconf.h deleted file mode 100644 index f4e1f8d..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/mcuconf.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -/* PEE mode - 48MHz system clock driven by external crystal. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode (~48MHz) */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~48MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV2 1 /* Divide by 1 for (~48MHz) peripheral clock */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~24MHz) flash clock */ -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/readme.txt b/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/readme.txt deleted file mode 100644 index 7680d00..0000000 --- a/ChibiOS_16.1.5/community/demos/KINETIS/RT-TEENSY3/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 MK20DX128. ** -***************************************************************************** - -** TARGET ** - -The demo runs on a PJRC Teensy 3 board. - -** The Demo ** - -The demo shows how to blink the LED on pin 13 of the board. - -** Build Procedure ** - -The demo has been tested by using the free ARM-none GCC toolchain. Just -modify the TRGT line in the makefile in order to use different GCC -toolchains. diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/Makefile b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/Makefile deleted file mode 100644 index f9a9627..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPTIMIZE = 0 - -# Debugging format. -DEBUG = -#DEBUG = stabs - -# Memory/data model -MODEL = small - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu11 - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O$(OPTIMIZE) -g$(DEBUG) - USE_OPT += -fsigned-char -fshort-enums -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# Enable the selected hardware multiplier -ifeq ($(USE_HWMULT),) - USE_HWMULT = f5series -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = yes -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the idle thread stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_IDLE_STACKSIZE),) - USE_IDLE_STACKSIZE = 0xC00 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = nil - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = ../../.. -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR5969/board.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk -include $(CHIBIOS)/os/hal/osal/nil/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/nil/nil.mk -include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk -# Other files (optional). -include $(CHIBIOS)/test/nil/test.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/msp430fr5969.ld - -# C sources -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources -CPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = msp430fr5969 - -TRGT = msp430-elf- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# MSP430-specific options here -MOPT = -m$(MODEL) - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/chconf.h b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/chconf.h deleted file mode 100644 index bf2ad1b..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/chconf.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nilconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_NIL_CONF_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of user threads in the application. - * @note This number is not inclusive of the idle thread which is - * Implicitly handled. - */ -#define CH_CFG_NUM_THREADS 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name System timer settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @note This value together with the @p CH_CFG_ST_RESOLUTION - * option defines the maximum amount of time allowed for - * timeouts. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_MUTEXES FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief System assertions. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Stack check. - * - *@note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System initialization hook. - */ -#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_INIT_HOOK() { \ -} -#endif - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - */ -#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \ - /* Add custom threads initialization code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief System halt hook. - */ -#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in nilcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/halconf.h b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/halconf.h deleted file mode 100644 index 578785c..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the DMA subsystem. - */ -#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__) -#define HAL_USE_DMA FALSE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS FALSE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/main.c b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/main.c deleted file mode 100644 index 27f0e52..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/main.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" -#include "ch.h" -#include "ch_test.h" -#include "test_root.h" - -/* - * Thread 2. - */ -THD_WORKING_AREA(waThread2, 2048); -THD_FUNCTION(Thread2, arg) { - - (void)arg; - - /* - * Activate the serial driver 0 using the driver default configuration. - */ - sdStart(&SD0, NULL); - - while (chnGetTimeout(&SD0, TIME_INFINITE)) { - chnWrite(&SD0, (const uint8_t *)"Hello World!\r\n", 14); - test_execute((void*)&SD0); - chThdSleepMilliseconds(2000); - } -} - -/* - * Threads static table, one entry per thread. The number of entries must - * match NIL_CFG_NUM_THREADS. - */ -THD_TABLE_BEGIN - THD_TABLE_ENTRY(wa_test_support, "test_support", test_support, - (void *)&nil.threads[1]) - THD_TABLE_ENTRY(waThread2, "hello", Thread2, NULL) -THD_TABLE_END - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - WDTCTL = WDTPW | WDTHOLD; - - - halInit(); - chSysInit(); - - /* This is now the idle thread loop, you may perform here a low priority - task but you must never try to sleep or wait in this loop. Note that - this tasks runs at the lowest priority level so any instruction added - here will be executed after all other tasks have been started.*/ - while (true) { - } -} diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/mcuconf.h b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/mcuconf.h deleted file mode 100644 index f47ee12..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/mcuconf.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * MSP430X drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - */ - -#define MSP430X_MCUCONF - -/* HAL driver system settings */ -#define MSP430X_ACLK_SRC MSP430X_VLOCLK -#define MSP430X_LFXTCLK_FREQ 0 -#define MSP430X_HFXTCLK_FREQ 0 -#define MSP430X_DCOCLK_FREQ 8000000 -#define MSP430X_MCLK_DIV 1 -#define MSP430X_SMCLK_DIV 32 - -/* - * SERIAL driver system settings. - */ -#define MSP430X_SERIAL_USE_USART0 TRUE -#define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_SERIAL_USE_USART1 FALSE -#define MSP430X_SERIAL_USE_USART2 FALSE -#define MSP430X_SERIAL_USE_USART3 FALSE - -/* - * ST driver system settings. - */ -#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_ST_TIMER_TYPE B -#define MSP430X_ST_TIMER_INDEX 0 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/msp_vectors.c b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/msp_vectors.c deleted file mode 100644 index ad2b367..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR5969/msp_vectors.c +++ /dev/null @@ -1,322 +0,0 @@ -#include - -__attribute__((interrupt(1))) -void Vector1(void) { - - while (1) { - } -} -__attribute__((interrupt(2))) -void Vector2(void) { - - while (1) { - } -} -__attribute__((interrupt(3))) -void Vector3(void) { - - while (1) { - } -} -__attribute__((interrupt(4))) -void Vector4(void) { - - while (1) { - } -} -__attribute__((interrupt(5))) -void Vector5(void) { - - while (1) { - } -} -__attribute__((interrupt(6))) -void Vector6(void) { - - while (1) { - } -} -__attribute__((interrupt(7))) -void Vector7(void) { - - while (1) { - } -} -__attribute__((interrupt(8))) -void Vector8(void) { - - while (1) { - } -} -__attribute__((interrupt(9))) -void Vector9(void) { - - while (1) { - } -} -__attribute__((interrupt(10))) -void Vector10(void) { - - while (1) { - } -} -__attribute__((interrupt(11))) -void Vector11(void) { - - while (1) { - } -} -__attribute__((interrupt(12))) -void Vector12(void) { - - while (1) { - } -} -__attribute__((interrupt(13))) -void Vector13(void) { - - while (1) { - } -} -__attribute__((interrupt(14))) -void Vector14(void) { - - while (1) { - } -} -__attribute__((interrupt(15))) -void Vector15(void) { - - while (1) { - } -} -__attribute__((interrupt(16))) -void Vector16(void) { - - while (1) { - } -} -__attribute__((interrupt(17))) -void Vector17(void) { - - while (1) { - } -} -__attribute__((interrupt(18))) -void Vector18(void) { - - while (1) { - } -} -__attribute__((interrupt(19))) -void Vector19(void) { - - while (1) { - } -} -__attribute__((interrupt(20))) -void Vector20(void) { - - while (1) { - } -} -__attribute__((interrupt(21))) -void Vector21(void) { - - while (1) { - } -} -__attribute__((interrupt(22))) -void Vector22(void) { - - while (1) { - } -} -__attribute__((interrupt(23))) -void Vector23(void) { - - while (1) { - } -} -__attribute__((interrupt(24))) -void Vector24(void) { - - while (1) { - } -} -__attribute__((interrupt(25))) -void Vector25(void) { - - while (1) { - } -} -__attribute__((interrupt(26))) -void Vector26(void) { - - while (1) { - } -} -__attribute__((interrupt(27))) -void Vector27(void) { - - while (1) { - } -} -__attribute__((interrupt(28))) -void Vector28(void) { - - while (1) { - } -} -__attribute__((interrupt(29))) -void Vector29(void) { - - while (1) { - } -} -__attribute__((interrupt(30))) -void Vector30(void) { - - while (1) { - } -} -__attribute__((interrupt(31))) -void Vector31(void) { - - while (1) { - } -} -__attribute__((interrupt(32))) -void Vector32(void) { - - while (1) { - } -} -__attribute__((interrupt(33))) -void Vector33(void) { - - while (1) { - } -} -__attribute__((interrupt(34))) -void Vector34(void) { - - while (1) { - } -} -__attribute__((interrupt(35))) -void Vector35(void) { - - while (1) { - } -} -__attribute__((interrupt(36))) -void Vector36(void) { - - while (1) { - } -} -__attribute__((interrupt(37))) -void Vector37(void) { - - while (1) { - } -} -__attribute__((interrupt(38))) -void Vector38(void) { - - while (1) { - } -} -__attribute__((interrupt(39))) -void Vector39(void) { - - while (1) { - } -} -__attribute__((interrupt(40))) -void Vector40(void) { - - while (1) { - } -} -__attribute__((interrupt(41))) -void Vector41(void) { - - while (1) { - } -} -__attribute__((interrupt(42))) -void Vector42(void) { - - while (1) { - } -} -__attribute__((interrupt(43))) -void Vector43(void) { - - while (1) { - } -} -__attribute__((interrupt(44))) -void Vector44(void) { - - while (1) { - } -} -__attribute__((interrupt(45))) -void Vector45(void) { - - while (1) { - } -} -__attribute__((interrupt(46))) -void Vector46(void) { - - while (1) { - } -} -__attribute__((interrupt(47))) -void Vector47(void) { - - while (1) { - } -} -__attribute__((interrupt(48))) -void Vector48(void) { - - while (1) { - } -} -__attribute__((interrupt(50))) -void Vector50(void) { - - while (1) { - } -} -__attribute__((interrupt(51))) -void Vector51(void) { - - while (1) { - } -} -__attribute__((interrupt(53))) -void Vector53(void) { - - while (1) { - } -} -__attribute__((interrupt(54))) -void Vector54(void) { - - while (1) { - } -} -__attribute__((interrupt(55))) -void Vector55(void) { - - while (1) { - } -} - - diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/Makefile b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/Makefile deleted file mode 100644 index fce3946..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/Makefile +++ /dev/null @@ -1,208 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPTIMIZE = 0 - -# Debugging format. -DEBUG = -#DEBUG = stabs - -# Memory/data model -MODEL = small - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu11 - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O$(OPTIMIZE) -g$(DEBUG) - USE_OPT += -fsigned-char -fshort-enums -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# Enable the selected hardware multiplier -ifeq ($(USE_HWMULT),) - USE_HWMULT = f5series -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = yes -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the idle thread stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_IDLE_STACKSIZE),) - USE_IDLE_STACKSIZE = 0xC00 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = nil - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = ../../.. -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR6989/board.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk -include $(CHIBIOS)/os/hal/osal/nil/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/nil/nil.mk -include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk -# Other files (optional). -include $(CHIBIOS)/test/nil/test.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/msp430fr6989.ld - -# C sources -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - msp_vectors.c \ - main.c - -# C++ sources -CPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = msp430fr6989 - -TRGT = msp430-elf- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# MSP430-specific options here -MOPT = -m$(MODEL) - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/chconf.h b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/chconf.h deleted file mode 100644 index bf2ad1b..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/chconf.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nilconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_NIL_CONF_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of user threads in the application. - * @note This number is not inclusive of the idle thread which is - * Implicitly handled. - */ -#define CH_CFG_NUM_THREADS 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name System timer settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @note This value together with the @p CH_CFG_ST_RESOLUTION - * option defines the maximum amount of time allowed for - * timeouts. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_MUTEXES FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief System assertions. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Stack check. - * - *@note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System initialization hook. - */ -#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_INIT_HOOK() { \ -} -#endif - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - */ -#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \ - /* Add custom threads initialization code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief System halt hook. - */ -#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in nilcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/halconf.h b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/halconf.h deleted file mode 100644 index 578785c..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the DMA subsystem. - */ -#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__) -#define HAL_USE_DMA FALSE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS FALSE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/main.c b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/main.c deleted file mode 100644 index 6789cfe..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/main.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" -#include "ch.h" -#include "ch_test.h" -#include "test_root.h" - -/* - * Thread 2. - */ -THD_WORKING_AREA(waThread2, 2048); -THD_FUNCTION(Thread2, arg) { - - (void)arg; - - /* - * Activate the serial driver 0 using the driver default configuration. - */ - sdStart(&SD1, NULL); - - while (chnGetTimeout(&SD1, TIME_INFINITE)) { - chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14); - test_execute((void*)&SD1); - chThdSleepMilliseconds(2000); - } -} - -/* - * Threads static table, one entry per thread. The number of entries must - * match NIL_CFG_NUM_THREADS. - */ -THD_TABLE_BEGIN - THD_TABLE_ENTRY(wa_test_support, "test_support", test_support, - (void *)&nil.threads[1]) - THD_TABLE_ENTRY(waThread2, "hello", Thread2, NULL) -THD_TABLE_END - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - WDTCTL = WDTPW | WDTHOLD; - - - halInit(); - chSysInit(); - - /* This is now the idle thread loop, you may perform here a low priority - task but you must never try to sleep or wait in this loop. Note that - this tasks runs at the lowest priority level so any instruction added - here will be executed after all other tasks have been started.*/ - while (true) { - } -} diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/mcuconf.h b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/mcuconf.h deleted file mode 100644 index 4f89f4e..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/mcuconf.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * MSP430X drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - */ - -#define MSP430X_MCUCONF - -/* HAL driver system settings */ -#define MSP430X_ACLK_SRC MSP430X_VLOCLK -#define MSP430X_LFXTCLK_FREQ 0 -#define MSP430X_HFXTCLK_FREQ 0 -#define MSP430X_DCOCLK_FREQ 8000000 -#define MSP430X_MCLK_DIV 1 -#define MSP430X_SMCLK_DIV 32 - -/* - * SERIAL driver system settings. - */ -#define MSP430X_SERIAL_USE_USART0 FALSE -#define MSP430X_SERIAL_USE_USART1 TRUE -#define MSP430X_USART1_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_SERIAL_USE_USART2 FALSE -#define MSP430X_SERIAL_USE_USART3 FALSE - -/* - * ST driver system settings. - */ -#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_ST_TIMER_TYPE B -#define MSP430X_ST_TIMER_INDEX 0 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/msp_vectors.c b/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/msp_vectors.c deleted file mode 100644 index daaf9b2..0000000 --- a/ChibiOS_16.1.5/community/demos/MSP430X/NIL-EXP430FR6989/msp_vectors.c +++ /dev/null @@ -1,322 +0,0 @@ -#include - -__attribute__((interrupt(1))) -void Vector1(void) { - - while (1) { - } -} -__attribute__((interrupt(2))) -void Vector2(void) { - - while (1) { - } -} -__attribute__((interrupt(3))) -void Vector3(void) { - - while (1) { - } -} -__attribute__((interrupt(4))) -void Vector4(void) { - - while (1) { - } -} -__attribute__((interrupt(5))) -void Vector5(void) { - - while (1) { - } -} -__attribute__((interrupt(6))) -void Vector6(void) { - - while (1) { - } -} -__attribute__((interrupt(7))) -void Vector7(void) { - - while (1) { - } -} -__attribute__((interrupt(8))) -void Vector8(void) { - - while (1) { - } -} -__attribute__((interrupt(9))) -void Vector9(void) { - - while (1) { - } -} -__attribute__((interrupt(10))) -void Vector10(void) { - - while (1) { - } -} -__attribute__((interrupt(11))) -void Vector11(void) { - - while (1) { - } -} -__attribute__((interrupt(12))) -void Vector12(void) { - - while (1) { - } -} -__attribute__((interrupt(13))) -void Vector13(void) { - - while (1) { - } -} -__attribute__((interrupt(14))) -void Vector14(void) { - - while (1) { - } -} -__attribute__((interrupt(15))) -void Vector15(void) { - - while (1) { - } -} -__attribute__((interrupt(16))) -void Vector16(void) { - - while (1) { - } -} -__attribute__((interrupt(17))) -void Vector17(void) { - - while (1) { - } -} -__attribute__((interrupt(18))) -void Vector18(void) { - - while (1) { - } -} -__attribute__((interrupt(19))) -void Vector19(void) { - - while (1) { - } -} -__attribute__((interrupt(20))) -void Vector20(void) { - - while (1) { - } -} -__attribute__((interrupt(21))) -void Vector21(void) { - - while (1) { - } -} -__attribute__((interrupt(22))) -void Vector22(void) { - - while (1) { - } -} -__attribute__((interrupt(23))) -void Vector23(void) { - - while (1) { - } -} -__attribute__((interrupt(24))) -void Vector24(void) { - - while (1) { - } -} -__attribute__((interrupt(25))) -void Vector25(void) { - - while (1) { - } -} -__attribute__((interrupt(26))) -void Vector26(void) { - - while (1) { - } -} -__attribute__((interrupt(27))) -void Vector27(void) { - - while (1) { - } -} -__attribute__((interrupt(28))) -void Vector28(void) { - - while (1) { - } -} -__attribute__((interrupt(29))) -void Vector29(void) { - - while (1) { - } -} -__attribute__((interrupt(30))) -void Vector30(void) { - - while (1) { - } -} -__attribute__((interrupt(31))) -void Vector31(void) { - - while (1) { - } -} -__attribute__((interrupt(32))) -void Vector32(void) { - - while (1) { - } -} -__attribute__((interrupt(33))) -void Vector33(void) { - - while (1) { - } -} -__attribute__((interrupt(34))) -void Vector34(void) { - - while (1) { - } -} -__attribute__((interrupt(35))) -void Vector35(void) { - - while (1) { - } -} -__attribute__((interrupt(36))) -void Vector36(void) { - - while (1) { - } -} -__attribute__((interrupt(37))) -void Vector37(void) { - - while (1) { - } -} -__attribute__((interrupt(38))) -void Vector38(void) { - - while (1) { - } -} -__attribute__((interrupt(39))) -void Vector39(void) { - - while (1) { - } -} -__attribute__((interrupt(40))) -void Vector40(void) { - - while (1) { - } -} -__attribute__((interrupt(41))) -void Vector41(void) { - - while (1) { - } -} -__attribute__((interrupt(42))) -void Vector42(void) { - - while (1) { - } -} -__attribute__((interrupt(44))) -void Vector44(void) { - - while (1) { - } -} -__attribute__((interrupt(45))) -void Vector45(void) { - - while (1) { - } -} -__attribute__((interrupt(46))) -void Vector46(void) { - - while (1) { - } -} -__attribute__((interrupt(47))) -void Vector47(void) { - - while (1) { - } -} -__attribute__((interrupt(48))) -void Vector48(void) { - - while (1) { - } -} -__attribute__((interrupt(49))) -void Vector49(void) { - - while (1) { - } -} -__attribute__((interrupt(50))) -void Vector50(void) { - - while (1) { - } -} -__attribute__((interrupt(51))) -void Vector51(void) { - - while (1) { - } -} -__attribute__((interrupt(53))) -void Vector53(void) { - - while (1) { - } -} -__attribute__((interrupt(54))) -void Vector54(void) { - - while (1) { - } -} -__attribute__((interrupt(55))) -void Vector55(void) { - - while (1) { - } -} - - diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/Makefile b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/Makefile deleted file mode 100644 index 6333de9..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/OSHCHIP_V1.0/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/chconf.h b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/chconf.h deleted file mode 100644 index a753ec9..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/debug/openocd.cfg b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/debug/openocd.cfg deleted file mode 100644 index 356c1b0..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/debug/openocd.cfg +++ /dev/null @@ -1,4 +0,0 @@ -source [find interface/cmsis-dap.cfg] - -set WORKAREASIZE 0x4000 -source [find target/nrf51.cfg] diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/halconf.h b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/halconf.h deleted file mode 100644 index fa27306..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/halconf.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c deleted file mode 100644 index 8e386fb..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - (void)arg; - - uint8_t led = LED_RED; - chRegSetThreadName("Blinker"); - - while (1) { - palClearPad(IOPORT1, led); - chThdSleepMilliseconds(100); - palSetPad(IOPORT1, led); - switch(led) { - case LED_RED: - led = LED_GREEN; - break; - case LED_GREEN: - led = LED_BLUE; - break; - case LED_BLUE: - led = LED_RED; - break; - } - } -} - -/* - * Application entry point. - */ -int main(void) { - - SerialConfig serial_config = { - .speed = 38400, - .tx_pad = UART_TX, - .rx_pad = UART_RX, - }; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates UART0 using the driver default configuration. - */ - sdStart(&SD1, &serial_config); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - test_execute((BaseSequentialStream *)&SD1); - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/mcuconf.h b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/mcuconf.h deleted file mode 100644 index 6e5664d..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/mcuconf.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* Possible value for NRF51_LFCLK_SOURCE are 0=RC, 1=XTAL, 2=Synth */ -#define NRF51_LFCLK_SOURCE 0 - -/* - * HAL driver system settings. - */ -#define NRF51_SERIAL_USE_UART0 TRUE -#define NRF51_ST_USE_RTC0 TRUE -#define NRF51_ST_USE_RTC1 FALSE -#define NRF51_ST_USE_TIMER0 FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/patch_hex.sh b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/patch_hex.sh deleted file mode 100644 index 81f7c32..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/patch_hex.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/bash - -# The official [OSHChip CMSIS-DAP programmer] provides also -# a MBED-type Mass Storage flashing mechanism - copying -# a hex file to the external "drive" flashes the firmware -# to the attached OSHChip. - -# However this MSD flasher expect the hex file to begin with the -# "Extended Linear Address" (e.g. ":020000040000FA"); this happens -# automatically if the firmware is >= 64kB, but MBED online compiler -# does this always. ARM GCC suite does not. Hence this script. - -# [OSHChip CMSIS-DAP programmer]: http://oshchip.org/products/OSHChip_CMSIS_DAP_V1.0_Product.html - -DIR=build -FILEBASE=ch -FILEEXT=hex -FILE="${FILEBASE}.${FILEEXT}" - -if [ ! -f "${DIR}/${FILE}" ]; then - echo "Build the firmware first." - exit 1 -fi - -if $(head "${DIR}/${FILE}" | grep -q ":02000004") ; then - echo "The format of ${DIR}/${FILE} is already good." - exit 2 -fi - -echo ":020000040000FA" > "${DIR}/${FILEBASE}_patched.hex" -cat "${DIR}/${FILE}" >> "${DIR}/${FILEBASE}_patched.hex" diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/readme.txt b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/readme.txt deleted file mode 100644 index a0f7967..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/readme.txt +++ /dev/null @@ -1,21 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M0 OSHChip (nRF51822). ** -***************************************************************************** - -** TARGET ** - -The demo runs on an OSHChip_V1.0 board. This board is powered by a Nordic -Semiconductor nRF51822 processor which is an ARM Cortex-M0 with bluetooth radio -hardware. For information about the board, see http://oshchip.org/ - -** The Demo ** - -This demo will print the standard TestThread output over UART (TX is DIP Pin 1) and sequentially blink all three LEDs. - -** Build Procedure ** - -The demo has been tested using the freely available GCC ARM Embedded toolchain. - -** Notes ** - -If the Mass Storage mechanism of the official OSHChip CMSIS-DAP debugger is desired for flashing the firmware, the hex file may need patching to be accepted by the Mass Storage flasher; see `patch_hex.sh`. diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/Makefile b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/Makefile deleted file mode 100644 index d9d0e95..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h deleted file mode 100644 index a753ec9..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/debug/openocd.cfg b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/debug/openocd.cfg deleted file mode 100644 index 078915a..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/debug/openocd.cfg +++ /dev/null @@ -1,6 +0,0 @@ -source [find interface/stlink-v2.cfg] - -transport select hla_swd - -set WORKAREASIZE 0x4000 -source [find target/nrf51.cfg] diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h deleted file mode 100644 index fa27306..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/main.c b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/main.c deleted file mode 100644 index 6b25a64..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/main.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - uint8_t led = LED0; - chRegSetThreadName("Blinker"); - while (1) { - palSetPad(IOPORT1, led); - chThdSleepMilliseconds(100); - palClearPad(IOPORT1, led); - if (++led > LED4) led = LED0; - } -} - -/* - * Application entry point. - */ -int main(void) { - - SerialConfig serial_config = { - .speed = 38400, - .tx_pad = UART_TX, - .rx_pad = UART_RX, - }; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates UART0 using the driver default configuration. - */ - sdStart(&SD1, &serial_config); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - test_execute((BaseSequentialStream *)&SD1); - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h deleted file mode 100644 index cef47aa..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * HAL driver system settings. - */ -#define NRF51_SERIAL_USE_UART0 TRUE -#define NRF51_ST_USE_RTC0 TRUE -#define NRF51_ST_USE_RTC1 FALSE -#define NRF51_ST_USE_TIMER0 FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/readme.txt b/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/readme.txt deleted file mode 100644 index 3ac2704..0000000 --- a/ChibiOS_16.1.5/community/demos/NRF51/RT-WVSHARE_BLE400/readme.txt +++ /dev/null @@ -1,18 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M0 WvShare BLE400 (nRF51822). ** -***************************************************************************** - -** TARGET ** - -The demo runs on an WvShare BLE400 board. This board is powered by a Nordic -Semiconductor nRF51822 processor which is an ARM Cortex-M0 with bluetooth radio -hardware. This board can be easily found on chinese websites. - -** The Demo ** - -This demo will print the standard TestThread output and blink all LEDs in a -sequential. - -** Build Procedure ** - -The demo has been tested using the freely available GCC ARM Embedded toolchain. diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.cproject b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.cproject deleted file mode 100644 index 916c7ab..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.gitignore b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.gitignore deleted file mode 100644 index 060dd31..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -build/ -.dep/ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.project b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.project deleted file mode 100644 index 106e56c..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/.project +++ /dev/null @@ -1,101 +0,0 @@ - - - STM32F429-DISCOVERY-DMA2D - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - copy_PARENT/os - - - os-git - 2 - copy_PARENT1/os - - - - - copy_PARENT - $%7BPARENT-1-CHIBIOS%7D/ChibiOS-Contrib - - - copy_PARENT1 - $%7BPARENT-1-copy_PARENT%7D - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/Makefile b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/Makefile deleted file mode 100644 index 894fe9d..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/Makefile +++ /dev/null @@ -1,229 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F429I_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT = STM32F429xI_SDRAM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - $(CHIBIOS_CONTRIB)/os/various/devices_lib/lcd/ili9341.c \ - main.c \ - wolf3d_palette.c \ - res/wolf3d_vgagraph_chunk87.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various/devices_lib/lcd \ - res - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/STM32F429xI_SDRAM.ld b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/STM32F429xI_SDRAM.ld deleted file mode 100644 index ae5c084..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/STM32F429xI_SDRAM.ld +++ /dev/null @@ -1,89 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F429xI memory setup. - * Note: Use of ram1, ram2 and ram3 is mutually exclusive with use of ram0. - */ -MEMORY -{ - flash0 : org = 0x08000000, len = 2M - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 192k /* SRAM1 + SRAM2 + SRAM3 */ - ram1 : org = 0x20000000, len = 112k /* SRAM1 */ - ram2 : org = 0x2001C000, len = 16k /* SRAM2 */ - ram3 : org = 0x20020000, len = 64k /* SRAM3 */ - ram4 : org = 0x10000000, len = 64k /* CCM SRAM */ - ram5 : org = 0x40024000, len = 4k /* BCKP SRAM */ - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0xD0000000, len = 8M /* SDRAM */ -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* RAM region to be used for SDRAM segment.*/ -REGION_ALIAS("SDRAM_RAM", ram7); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h deleted file mode 100644 index a0fc879..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Flash and Run).launch deleted file mode 100644 index 0dcd332..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Run Only).launch b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Run Only).launch deleted file mode 100644 index 019efd1..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/debug/RT-STM32F429-DISCOVERY-DMA2D (OpenOCD, Run Only).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h deleted file mode 100644 index e9b1a23..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers' includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h deleted file mode 100644 index 24b3e4d..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC TRUE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c deleted file mode 100644 index aa7ac10..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c +++ /dev/null @@ -1,615 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "chprintf.h" -#include "shell.h" -#if (HAL_USE_SERIAL_USB == TRUE) -#include "usbcfg.h" -#endif - -#include "hal_fsmc_sdram.h" -#include "ili9341.h" -#include "hal_stm32_ltdc.h" -#include "hal_stm32_dma2d.h" - -#include "res/wolf3d_vgagraph_chunk87.h" - -/*===========================================================================*/ -/* SDRAM related. */ -/*===========================================================================*/ - -// TODO: Move constants below elsewhere, and normalize their name - -/* SDRAM bank base address.*/ -#define SDRAM_BANK_ADDR ((uint32_t)0xD0000000) - -/* - * FMC SDRAM Mode definition register defines - */ -#define FMC_SDCMR_MRD_BURST_LENGTH_1 ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_BURST_LENGTH_2 ((uint16_t)0x0001) -#define FMC_SDCMR_MRD_BURST_LENGTH_4 ((uint16_t)0x0002) -#define FMC_SDCMR_MRD_BURST_LENGTH_8 ((uint16_t)0x0004) -#define FMC_SDCMR_MRD_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) -#define FMC_SDCMR_MRD_CAS_LATENCY_2 ((uint16_t)0x0020) -#define FMC_SDCMR_MRD_CAS_LATENCY_3 ((uint16_t)0x0030) -#define FMC_SDCMR_MRD_OPERATING_MODE_STANDARD ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) - -/* - * FMC_ReadPipe_Delay - */ -#define FMC_ReadPipe_Delay_0 ((uint32_t)0x00000000) -#define FMC_ReadPipe_Delay_1 ((uint32_t)0x00002000) -#define FMC_ReadPipe_Delay_2 ((uint32_t)0x00004000) -#define FMC_ReadPipe_Delay_Mask ((uint32_t)0x00006000) - -/* - * FMC_Read_Burst - */ -#define FMC_Read_Burst_Disable ((uint32_t)0x00000000) -#define FMC_Read_Burst_Enable ((uint32_t)0x00001000) -#define FMC_Read_Burst_Mask ((uint32_t)0x00001000) - -/* - * FMC_SDClock_Period - */ -#define FMC_SDClock_Disable ((uint32_t)0x00000000) -#define FMC_SDClock_Period_2 ((uint32_t)0x00000800) -#define FMC_SDClock_Period_3 ((uint32_t)0x00000C00) -#define FMC_SDClock_Period_Mask ((uint32_t)0x00000C00) - -/* - * FMC_ColumnBits_Number - */ -#define FMC_ColumnBits_Number_8b ((uint32_t)0x00000000) -#define FMC_ColumnBits_Number_9b ((uint32_t)0x00000001) -#define FMC_ColumnBits_Number_10b ((uint32_t)0x00000002) -#define FMC_ColumnBits_Number_11b ((uint32_t)0x00000003) - -/* - * FMC_RowBits_Number - */ -#define FMC_RowBits_Number_11b ((uint32_t)0x00000000) -#define FMC_RowBits_Number_12b ((uint32_t)0x00000004) -#define FMC_RowBits_Number_13b ((uint32_t)0x00000008) - -/* - * FMC_SDMemory_Data_Width - */ -#define FMC_SDMemory_Width_8b ((uint32_t)0x00000000) -#define FMC_SDMemory_Width_16b ((uint32_t)0x00000010) -#define FMC_SDMemory_Width_32b ((uint32_t)0x00000020) - -/* - * FMC_InternalBank_Number - */ -#define FMC_InternalBank_Number_2 ((uint32_t)0x00000000) -#define FMC_InternalBank_Number_4 ((uint32_t)0x00000040) - -/* - * FMC_CAS_Latency - */ -#define FMC_CAS_Latency_1 ((uint32_t)0x00000080) -#define FMC_CAS_Latency_2 ((uint32_t)0x00000100) -#define FMC_CAS_Latency_3 ((uint32_t)0x00000180) - -/* - * FMC_Write_Protection - */ -#define FMC_Write_Protection_Disable ((uint32_t)0x00000000) -#define FMC_Write_Protection_Enable ((uint32_t)0x00000200) - -/* - * SDRAM driver configuration structure. - */ -static const SDRAMConfig sdram_cfg = { - .sdcr = (uint32_t)(FMC_ColumnBits_Number_8b | - FMC_RowBits_Number_12b | - FMC_SDMemory_Width_16b | - FMC_InternalBank_Number_4 | - FMC_CAS_Latency_3 | - FMC_Write_Protection_Disable | - FMC_SDClock_Period_2 | - FMC_Read_Burst_Disable | - FMC_ReadPipe_Delay_1), - - .sdtr = (uint32_t)((2 - 1) | // FMC_LoadToActiveDelay = 2 (TMRD: 2 Clock cycles) - (7 << 4) | // FMC_ExitSelfRefreshDelay = 7 (TXSR: min=70ns (7x11.11ns)) - (4 << 8) | // FMC_SelfRefreshTime = 4 (TRAS: min=42ns (4x11.11ns) max=120k (ns)) - (7 << 12) | // FMC_RowCycleDelay = 7 (TRC: min=70 (7x11.11ns)) - (2 << 16) | // FMC_WriteRecoveryTime = 2 (TWR: min=1+ 7ns (1+1x11.11ns)) - (2 << 20) | // FMC_RPDelay = 2 (TRP: 20ns => 2x11.11ns) - (2 << 24)), // FMC_RCDDelay = 2 (TRCD: 20ns => 2x11.11ns) - - .sdcmr = (uint32_t)(((4 - 1) << 5) | - ((FMC_SDCMR_MRD_BURST_LENGTH_2 | - FMC_SDCMR_MRD_BURST_TYPE_SEQUENTIAL | - FMC_SDCMR_MRD_CAS_LATENCY_3 | - FMC_SDCMR_MRD_OPERATING_MODE_STANDARD | - FMC_SDCMR_MRD_WRITEBURST_MODE_SINGLE) << 9)), - - /* if (STM32_SYSCLK == 180000000) -> - 64ms / 4096 = 15.625us - 15.625us * 90MHz = 1406 - 20 = 1386 */ - //.sdrtr = (1386 << 1), - .sdrtr = (uint32_t)(683 << 1), -}; - -/* SDRAM size, in bytes.*/ -#define IS42S16400J_SIZE (8 * 1024 * 1024) - -/* - * Erases the whole SDRAM bank. - */ -static void sdram_bulk_erase(void) { - - volatile uint8_t *p = (volatile uint8_t *)SDRAM_BANK_ADDR; - volatile uint8_t *end = p + IS42S16400J_SIZE; - while (p < end) - *p++ = 0; -} - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker1"); - while (true) { - palClearPad(GPIOG, GPIOG_LED4_RED); - chThdSleepMilliseconds(500); - palSetPad(GPIOG, GPIOG_LED4_RED); - chThdSleepMilliseconds(500); - } -} - -/* - * Green LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread2, 128); -static THD_FUNCTION(Thread2, arg) { - - (void)arg; - chRegSetThreadName("blinker2"); - while (true) { - palClearPad(GPIOG, GPIOG_LED3_GREEN); - chThdSleepMilliseconds(250); - palSetPad(GPIOG, GPIOG_LED3_GREEN); - chThdSleepMilliseconds(250); - } -} - -/*===========================================================================*/ -/* LTDC related. */ -/*===========================================================================*/ - -static uint8_t frame_buffer[240 * 320 * 3] __attribute__((section(".ram7"))); - -static uint8_t view_buffer[240 * 320]; - -extern const ltdc_color_t wolf3d_palette[256]; - -static const ltdc_window_t ltdc_fullscreen_wincfg = { - 0, - 240 - 1, - 0, - 320 - 1, -}; - -static const ltdc_frame_t ltdc_view_frmcfg1 = { - view_buffer, - 240, - 320, - 240 * sizeof(uint8_t), - LTDC_FMT_L8, -}; - -static const ltdc_laycfg_t ltdc_view_laycfg1 = { - <dc_view_frmcfg1, - <dc_fullscreen_wincfg, - LTDC_COLOR_FUCHSIA, - 0xFF, - 0x980088, - wolf3d_palette, - 256, - LTDC_BLEND_FIX1_FIX2, - (LTDC_LEF_ENABLE | LTDC_LEF_PALETTE), -}; - -static const ltdc_frame_t ltdc_screen_frmcfg1 = { - frame_buffer, - 240, - 320, - 240 * 3, - LTDC_FMT_RGB888, -}; - -static const ltdc_laycfg_t ltdc_screen_laycfg1 = { - <dc_screen_frmcfg1, - <dc_fullscreen_wincfg, - LTDC_COLOR_FUCHSIA, - 0xFF, - 0x980088, - NULL, - 0, - LTDC_BLEND_FIX1_FIX2, - LTDC_LEF_ENABLE, -}; - -static const LTDCConfig ltdc_cfg = { - /* Display specifications.*/ - 240, /**< Screen pixel width.*/ - 320, /**< Screen pixel height.*/ - 10, /**< Horizontal sync pixel width.*/ - 2, /**< Vertical sync pixel height.*/ - 20, /**< Horizontal back porch pixel width.*/ - 2, /**< Vertical back porch pixel height.*/ - 10, /**< Horizontal front porch pixel width.*/ - 4, /**< Vertical front porch pixel height.*/ - 0, /**< Driver configuration flags.*/ - - /* ISR callbacks.*/ - NULL, /**< Line Interrupt ISR, or @p NULL.*/ - NULL, /**< Register Reload ISR, or @p NULL.*/ - NULL, /**< FIFO Underrun ISR, or @p NULL.*/ - NULL, /**< Transfer Error ISR, or @p NULL.*/ - - /* Color and layer settings.*/ - LTDC_COLOR_TEAL, - <dc_view_laycfg1, - NULL, -}; - -extern LTDCDriver LTDCD1; - -const SPIConfig spi_cfg5 = { - NULL, - GPIOC, - GPIOC_SPI5_LCD_CS, - (((1 << 3) & SPI_CR1_BR) | SPI_CR1_SSM | SPI_CR1_SSI | SPI_CR1_MSTR), -}; - -extern SPIDriver SPID5; - -const ILI9341Config ili9341_cfg = { - &SPID5, - GPIOD, - GPIOD_LCD_WRX -}; - -static void initialize_lcd(void) { - - static const uint8_t pgamma[15] = { - 0x0F, 0x29, 0x24, 0x0C, 0x0E, 0x09, 0x4E, 0x78, - 0x3C, 0x09, 0x13, 0x05, 0x17, 0x11, 0x00 - }; - static const uint8_t ngamma[15] = { - 0x00, 0x16, 0x1B, 0x04, 0x11, 0x07, 0x31, 0x33, - 0x42, 0x05, 0x0C, 0x0A, 0x28, 0x2F, 0x0F - }; - - ILI9341Driver *const lcdp = &ILI9341D1; - - /* XOR-checkerboard texture.*/ - unsigned x, y; - for (y = 0; y < 320; ++y) - for (x = 0; x < 240; ++x) - view_buffer[y * 240 + x] = (uint8_t)(x ^ y); - - ili9341AcquireBus(lcdp); - ili9341Select(lcdp); - - ili9341WriteCommand(lcdp, ILI9341_SET_FRAME_CTL_NORMAL); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0x1B); - - ili9341WriteCommand(lcdp, ILI9341_SET_FUNCTION_CTL); - ili9341WriteByte(lcdp, 0x0A); - ili9341WriteByte(lcdp, 0xA2); - - ili9341WriteCommand(lcdp, ILI9341_SET_POWER_CTL_1); - ili9341WriteByte(lcdp, 0x10); - - ili9341WriteCommand(lcdp, ILI9341_SET_POWER_CTL_2); - ili9341WriteByte(lcdp, 0x10); - - ili9341WriteCommand(lcdp, ILI9341_SET_VCOM_CTL_1); - ili9341WriteByte(lcdp, 0x45); - ili9341WriteByte(lcdp, 0x15); - - ili9341WriteCommand(lcdp, ILI9341_SET_VCOM_CTL_2); - ili9341WriteByte(lcdp, 0x90); - - ili9341WriteCommand(lcdp, ILI9341_SET_MEM_ACS_CTL); - ili9341WriteByte(lcdp, 0xC8); - - ili9341WriteCommand(lcdp, ILI9341_SET_RGB_IF_SIG_CTL); - ili9341WriteByte(lcdp, 0xC2); - - ili9341WriteCommand(lcdp, ILI9341_SET_FUNCTION_CTL); - ili9341WriteByte(lcdp, 0x0A); - ili9341WriteByte(lcdp, 0xA7); - ili9341WriteByte(lcdp, 0x27); - ili9341WriteByte(lcdp, 0x04); - - ili9341WriteCommand(lcdp, ILI9341_SET_COL_ADDR); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0xEF); - - ili9341WriteCommand(lcdp, ILI9341_SET_PAGE_ADDR); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0x01); - ili9341WriteByte(lcdp, 0x3F); - - ili9341WriteCommand(lcdp, ILI9341_SET_IF_CTL); - ili9341WriteByte(lcdp, 0x01); - ili9341WriteByte(lcdp, 0x00); - ili9341WriteByte(lcdp, 0x06); - - ili9341WriteCommand(lcdp, ILI9341_SET_GAMMA); - ili9341WriteByte(lcdp, 0x01); - - ili9341WriteCommand(lcdp, ILI9341_SET_PGAMMA); - ili9341WriteChunk(lcdp, pgamma, 15); - - ili9341WriteCommand(lcdp, ILI9341_SET_NGAMMA); - ili9341WriteChunk(lcdp, ngamma, 15); - - ili9341WriteCommand(lcdp, ILI9341_CMD_SLEEP_OFF); - chThdSleepMilliseconds(10); - - ili9341WriteCommand(lcdp, ILI9341_CMD_DISPLAY_ON); - ili9341WriteCommand(lcdp, ILI9341_SET_MEM); - chThdSleepMilliseconds(10); - - ili9341Unselect(lcdp); - ili9341ReleaseBus(lcdp); -} - -static const DMA2DConfig dma2d_cfg = { - /* ISR callbacks.*/ - NULL, /**< Configuration error, or @p NULL.*/ - NULL, /**< Palette transfer done, or @p NULL.*/ - NULL, /**< Palette access error, or @p NULL.*/ - NULL, /**< Transfer watermark, or @p NULL.*/ - NULL, /**< Transfer complete, or @p NULL.*/ - NULL /**< Transfer error, or @p NULL.*/ -}; - -static const dma2d_palcfg_t dma2d_palcfg = { - wolf3d_palette, - 256, - DMA2D_FMT_ARGB8888 -}; - -static const dma2d_laycfg_t dma2d_bg_laycfg = { - view_buffer, - 0, - DMA2D_FMT_L8, - DMA2D_COLOR_RED, - 0xFF, - &dma2d_palcfg -}; - -static const dma2d_laycfg_t dma2d_fg_laycfg = { - (void *)wolf3d_vgagraph_chunk87, - 0, - DMA2D_FMT_L8, - DMA2D_COLOR_LIME, - 0xFF, - &dma2d_palcfg -}; - -static const dma2d_laycfg_t dma2d_frame_laycfg = { - frame_buffer, - 0, - DMA2D_FMT_RGB888, - DMA2D_COLOR_BLUE, - 0xFF, - NULL -}; - -static void dma2d_test(void) { - - DMA2DDriver *const dma2dp = &DMA2DD1; - LTDCDriver *const ltdcp = <DCD1; - - chThdSleepSeconds(1); - - ltdcBgSetConfig(ltdcp, <dc_screen_laycfg1); - ltdcReload(ltdcp, TRUE); - - dma2dAcquireBus(dma2dp); - - /* Target the frame buffer by default.*/ - dma2dBgSetConfig(dma2dp, &dma2d_frame_laycfg); - dma2dFgSetConfig(dma2dp, &dma2d_frame_laycfg); - dma2dOutSetConfig(dma2dp, &dma2d_frame_laycfg); - - /* Copy the background.*/ - dma2dFgSetConfig(dma2dp, &dma2d_bg_laycfg); - dma2dJobSetMode(dma2dp, DMA2D_JOB_CONVERT); - dma2dJobSetSize(dma2dp, 240, 320); - dma2dJobExecute(dma2dp); - - /* Draw the splashscren picture at (8, 0).*/ - dma2dFgSetConfig(dma2dp, &dma2d_fg_laycfg); - dma2dOutSetAddress(dma2dp, dma2dComputeAddress( - frame_buffer, ltdc_screen_frmcfg1.pitch, DMA2D_FMT_RGB888, 8, 0 - )); - dma2dOutSetWrapOffset(dma2dp, ltdc_screen_frmcfg1.width - 200); - dma2dJobSetMode(dma2dp, DMA2D_JOB_CONVERT); - dma2dJobSetSize(dma2dp, 200, 320); - dma2dJobExecute(dma2dp); - - dma2dReleaseBus(dma2dp); -} - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#if (HAL_USE_SERIAL_USB == TRUE) -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; -#endif - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_reset(BaseSequentialStream *chp, int argc, char *argv[]) { - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: reset\r\n"); - return; - } - - chprintf(chp, "Will reset in 200ms\r\n"); - chThdSleepMilliseconds(200); - NVIC_SystemReset(); -} - -static const ShellCommand commands[] = { - {"reset", cmd_reset}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { -#if (HAL_USE_SERIAL_USB == TRUE) - (BaseSequentialStream *)&SDU1, -#else - (BaseSequentialStream *)&SD1, -#endif - commands -}; - -/*===========================================================================*/ -/* Initialization and main thread. */ -/*===========================================================================*/ - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Shell manager initialization. - */ - shellInit(); - -#if (HAL_USE_SERIAL_USB == TRUE) - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); -#else - /* - * Initializes serial port. - */ - sdStart(&SD1, NULL); -#endif /* HAL_USE_SERIAL_USB */ - - /* - * Initialise FSMC for SDRAM. - */ - fsmcSdramInit(); - fsmcSdramStart(&SDRAMD, &sdram_cfg); - sdram_bulk_erase(); - - /* - * Activates the LCD-related drivers. - */ - spiStart(&SPID5, &spi_cfg5); - ili9341ObjectInit(&ILI9341D1); - ili9341Start(&ILI9341D1, &ili9341_cfg); - initialize_lcd(); - ltdcInit(); - ltdcStart(<DCD1, <dc_cfg); - - /* - * Activates the DMA2D-related drivers. - */ - dma2dInit(); - dma2dStart(&DMA2DD1, &dma2d_cfg); - dma2d_test(); - - /* - * Creating the blinker threads. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), - NORMALPRIO + 10, Thread1, NULL); - chThdCreateStatic(waThread2, sizeof(waThread2), - NORMALPRIO + 10, Thread2, NULL); - - /* - * Normal main() thread activity, in this demo it just performs - * a shell respawn upon its termination. - */ - while (true) { - if (!shelltp) { -#if (HAL_USE_SERIAL_USB == TRUE) - if (SDU1.config->usbp->state == USB_ACTIVE) { - /* Spawns a new shell.*/ - shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1); - } -#else - shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1); -#endif - } - else { - /* If the previous shell exited.*/ - if (chThdTerminatedX(shelltp)) { - /* Recovers memory of the previous shell.*/ - chThdRelease(shelltp); - shelltp = NULL; - } - } - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h deleted file mode 100644 index 817ed59..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h +++ /dev/null @@ -1,380 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -#define STM32_SAISRC STM32_SAISRC_PLL -#define STM32_PLLSAIN_VALUE 192 -#define STM32_PLLSAIQ_VALUE 7 -#define STM32_PLLSAIR_VALUE 4 -#define STM32_PLLSAIR_POST STM32_SAIR_DIV4 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_USE_SPI4 FALSE -#define STM32_SPI_USE_SPI5 TRUE -#define STM32_SPI_USE_SPI6 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_SPI_SPI6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI4_DMA_PRIORITY 1 -#define STM32_SPI_SPI5_DMA_PRIORITY 1 -#define STM32_SPI_SPI6_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_SPI4_IRQ_PRIORITY 10 -#define STM32_SPI_SPI5_IRQ_PRIORITY 10 -#define STM32_SPI_SPI6_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * LTDC driver system settings. - */ -#define STM32_LTDC_USE_LTDC TRUE -#define STM32_LTDC_EV_IRQ_PRIORITY 11 -#define STM32_LTDC_ER_IRQ_PRIORITY 11 - -/* - * DMA2D driver system settings. - */ -#define STM32_DMA2D_USE_DMA2D TRUE -#define STM32_DMA2D_IRQ_PRIORITY 11 - -/* - * Header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h deleted file mode 100644 index e572973..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 TRUE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM TRUE -#define STM32_SDRAM_USE_FSMC_SDRAM1 FALSE -#define STM32_SDRAM_USE_FSMC_SDRAM2 TRUE - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/readme.txt b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/readme.txt deleted file mode 100644 index 3342a4c..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/readme.txt +++ /dev/null @@ -1,29 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 STM32F429. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F429I-Discovery board. - -** The Demo ** - -A simple command shell is activated on virtual serial port SD1. -The demo makes use of FMC, LTDC, and DMA2D peripherals to show graphical -contents on the display of the board, composed both on the on-chip SRAM -and the on-board SDRAM. - -** Build Procedure ** - -The demo has been tested by using the free Codesourcery GCC-based toolchain -and YAGARTO. just modify the TRGT line in the makefile in order to use -different GCC toolchains. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bin b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bin deleted file mode 100644 index aee3942..0000000 Binary files a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bin and /dev/null differ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bmp b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bmp deleted file mode 100644 index c50e16b..0000000 Binary files a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/chunk87.bmp and /dev/null differ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_palette.gif b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_palette.gif deleted file mode 100644 index 4cb7105..0000000 Binary files a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_palette.gif and /dev/null differ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c deleted file mode 100644 index 6439a45..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c +++ /dev/null @@ -1,4005 +0,0 @@ -/* Generated by bin2c, do not edit manually */ - -/* Contents of file chunk87.bin */ -const unsigned char wolf3d_vgagraph_chunk87[64000] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x1F, 0x1F, 0x9E, 0x9E, 0x9E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x9D, 0x9D, 0xE9, 0xE9, 0x9E, 0x9E, 0xE9, 0xE9, 0x9D, 0x9D, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, - 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9C, 0x9C, - 0x9E, 0x9E, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, - 0x9E, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x9E, 0x9E, 0x1F, - 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, - 0xE9, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x00, - 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0x00, 0x00, 0xE8, 0xE9, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0x00, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0x00, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0x9E, 0x9E, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, - 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x9E, 0x9E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0xE9, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0xE8, 0xE9, - 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0x00, 0x00, 0x00, - 0xE9, 0xE8, 0xE8, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, - 0x9F, 0x9F, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0xE9, 0xE9, 0xE9, 0x00, - 0x00, 0xE9, 0xE9, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9E, - 0x9E, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x00, - 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, - 0xE8, 0xE8, 0xE9, 0xE9, 0xE8, 0xE8, 0x9C, 0x9C, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0x00, 0x00, 0xE9, - 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0x9C, 0x9C, - 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x1F, - 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, 0x9D, 0x9D, 0x9C, 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9E, - 0xE8, 0x00, 0x00, 0xE8, 0xE8, 0x9E, 0x9E, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1E, 0x00, - 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, - 0x9E, 0x9F, 0x9F, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, - 0x9C, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9E, 0xE8, 0x00, 0x00, 0xE8, 0xE8, 0x9E, 0x9E, 0xE8, - 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x9F, 0x00, 0x9F, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, - 0x1F, 0x00, 0x00, 0x1F, 0x1E, 0x00, 0x1E, 0x1E, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xE8, 0x9E, 0x9D, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, 0x9D, - 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, 0x9C, 0x9C, 0x9E, 0x9E, 0x9E, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9E, 0x9F, 0x9F, 0x9F, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9C, 0x9C, 0x9C, 0x9C, 0x9E, - 0xE8, 0x00, 0x00, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1D, 0x1F, 0x1E, - 0x1F, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x9D, 0x9D, - 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, - 0x9E, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9E, 0x9E, 0x9E, 0x9D, 0x9C, 0x9C, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9C, 0x9C, 0x9C, 0x9C, 0x9E, 0xE8, 0x00, 0x00, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, - 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0x1F, 0x1E, 0x1F, 0x1D, 0x1F, 0x1D, 0x1F, 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x1F, 0x00, - 0x1F, 0x1F, 0x00, 0x00, 0x00, 0xE8, 0x9E, 0x9E, 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, - 0x9E, 0x9B, 0x9B, 0x9B, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9E, 0x9E, 0x9E, 0x9B, 0x9B, 0x9B, 0x9C, 0x9D, 0x9D, 0x9C, 0x9C, 0x99, 0x99, 0x9C, 0x9C, 0x9E, - 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0x9D, 0x9D, 0xE8, 0xE8, 0x1F, 0xED, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1F, 0x1F, 0x1D, - 0x1F, 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0xE8, 0x9E, 0x9D, - 0x9C, 0x9D, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, 0x9B, 0x9B, 0x9B, 0x9B, 0x9F, 0x9F, 0x9E, 0x9F, - 0x9F, 0x9D, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, - 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9E, 0x9E, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, - 0x9D, 0x9C, 0x9C, 0x99, 0x99, 0x9C, 0x9C, 0x9E, 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0x9D, 0x9D, 0xE8, - 0xE8, 0x1F, 0xED, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1D, 0x1F, 0x1D, 0x1F, 0x1F, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, - 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9D, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9F, - 0x9F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9E, - 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0xE9, 0xE9, 0xE8, 0xE8, 0x1F, 0xED, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1D, 0x1F, - 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE9, - 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9B, 0x9B, 0x9B, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9F, 0x9F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9E, 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0xE9, 0xE9, 0xE8, - 0xE8, 0x1F, 0xED, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, - 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xE8, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9C, 0x9C, 0x9C, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9F, 0x9F, - 0x9C, 0x9C, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9E, 0x9E, 0x9E, - 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0xE8, 0xE8, 0x1F, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, - 0x1E, 0x00, 0x1F, 0x1F, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0xE8, 0x9D, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, 0x9F, 0x9F, 0x9C, 0x9C, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9E, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0xE8, - 0xE8, 0x1F, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x00, 0x1E, 0x1F, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0x9D, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, - 0x9D, 0x9C, 0x9C, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9E, 0x9E, 0x9F, 0x9F, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, - 0x1F, 0x1E, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x1C, 0x00, 0x00, 0x00, - 0x00, 0x9D, 0x9F, 0x9F, 0xE8, 0xE8, 0x9F, 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9D, - 0x9B, 0x9B, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, - 0x9D, 0x9B, 0x9D, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x00, 0x00, 0x00, 0x1F, 0x1F, - 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1C, 0x00, 0x00, 0x00, 0x9D, 0x9D, 0x9F, 0xE8, 0xE8, 0x9F, 0x9F, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9F, - 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9E, 0x9C, 0x9C, 0x9C, 0x9F, 0x9F, - 0x9E, 0xE9, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0x1E, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, - 0x00, 0x9D, 0x9D, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0x9C, 0x9D, 0x9D, 0x9B, - 0x9B, 0x9B, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, - 0x9D, 0xE8, 0xE8, 0x9C, 0x9C, 0x9C, 0x9F, 0x9F, 0x9E, 0xE9, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x1E, 0x00, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0x9C, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0x9F, 0x9E, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, - 0xE8, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x1E, 0x1F, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x00, 0x00, 0x1D, 0x1E, 0x1D, 0x1E, - 0x00, 0xE8, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0x9C, 0x9D, 0x9D, 0x9B, 0x9B, - 0x9B, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE8, 0xE8, 0xE8, 0x9F, 0xE8, 0xE8, - 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, - 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0x00, - 0x00, 0x1E, 0x1E, 0x1D, 0x00, 0x1D, 0x1E, 0x1D, 0x1E, 0x00, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, - 0xE8, 0xE8, 0x9E, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, - 0x9F, 0x9E, 0x9E, 0x9C, 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0xED, 0xED, 0xED, 0xED, 0x1E, - 0x1F, 0x1F, 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1F, - 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, - 0xDF, 0xDE, 0xDD, 0xDD, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x1D, 0x00, 0x1D, 0x1D, - 0x1D, 0x1D, 0x00, 0xE8, 0x9E, 0x9C, 0x9C, 0x9E, 0xE8, 0xE8, 0x9E, 0x9D, 0x9C, 0x9C, 0x9D, 0x9C, - 0x9C, 0x9E, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE8, 0x9F, 0xE8, 0xE8, - 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0x9D, 0x9D, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1E, - 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0xEE, 0xEE, 0x1E, - 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x1F, - 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0xDD, 0xDF, 0xDC, 0xDC, 0xDD, 0xDF, 0xDF, 0xDE, 0xDE, 0xDE, - 0xDF, 0x00, 0x00, 0x1E, 0x1D, 0x1E, 0x1F, 0x1F, 0x1D, 0x1D, 0x1D, 0x00, 0xE8, 0x9C, 0x9C, 0x9C, - 0x9E, 0x9F, 0x9E, 0x9D, 0x9C, 0x9C, 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, 0xE8, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9E, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE9, - 0xE9, 0xE9, 0x9D, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0xED, 0xED, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0xEE, 0xEE, 0x1E, 0x00, 0x00, 0xEE, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x1E, 0x1D, - 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDD, 0xDF, 0xDE, - 0xDC, 0xDD, 0xDF, 0xDD, 0xDB, 0xDB, 0xDB, 0xDB, 0xDE, 0xDF, 0x00, 0x00, 0x1E, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x1E, 0x00, 0x9D, 0x9D, 0x9C, 0x9C, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9F, 0x9E, - 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0x9F, 0xE8, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0xED, 0x1D, - 0x1D, 0x1D, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0x1D, 0xEE, 0x1E, 0x1F, 0x1D, 0x1C, 0xEC, - 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x00, 0x1E, 0x1D, 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, - 0x1E, 0x00, 0x00, 0xDF, 0xDF, 0xDD, 0xDF, 0xDC, 0xDD, 0xDD, 0xDD, 0xDB, 0xDB, 0xDB, 0xDE, 0xDC, - 0xDA, 0xDA, 0xDA, 0xDD, 0x00, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0x1F, 0x9E, - 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x00, 0xE8, 0xE8, 0xE9, 0xE8, 0xE8, 0x9F, 0xE8, 0xE8, 0xE8, - 0xE8, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x1F, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, - 0x1C, 0x1C, 0x1D, 0x1E, 0x1F, 0x1D, 0x1C, 0x1C, 0x1C, 0xEC, 0x1D, 0x1E, 0x1F, 0x1F, 0x1E, 0x1D, - 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x00, 0xDF, 0xDF, 0xDD, 0xDF, 0xDC, 0xDC, - 0xDD, 0xDA, 0xD8, 0xD9, 0xDB, 0xDE, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDD, 0x00, 0x1C, 0x1C, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0x9E, 0x9E, 0x9F, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x00, 0x00, - 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0x9E, - 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9E, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x1F, 0x1F, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, - 0xEC, 0x1C, 0x1C, 0x1C, 0xEA, 0xEA, 0xEA, 0xEA, 0xEA, 0x1C, 0x1C, 0x1D, 0x1E, 0x1D, 0x1C, 0x1B, - 0xEA, 0x1C, 0xEC, 0x1E, 0x1E, 0x1F, 0x1D, 0x1C, 0x1D, 0x1E, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xDF, 0xDD, 0xDD, 0xDC, 0xDA, 0xDA, 0xDA, 0xDA, 0xD5, 0xDB, 0xDC, 0xDA, 0xDA, 0xDA, - 0xD5, 0xD5, 0xDA, 0xDA, 0xDA, 0x00, 0x00, 0x1E, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE8, - 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, - 0x9E, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0x9F, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, 0x1C, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, - 0x1B, 0x1B, 0x1C, 0xEC, 0x1D, 0x1D, 0x1C, 0xEA, 0x1B, 0xEA, 0x1C, 0xEC, 0x1D, 0x1E, 0x1D, 0x1C, - 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x1F, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, - 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDD, 0xDC, 0xDC, 0xDA, 0xDD, - 0xDA, 0xD8, 0xCF, 0xDD, 0xDA, 0xDA, 0xDA, 0xDA, 0xCF, 0xDF, 0xDD, 0xDA, 0xDA, 0x00, 0x00, 0x00, - 0x00, 0x19, 0x1C, 0x19, 0x1E, 0x1D, 0x1E, 0x00, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9F, 0x9F, 0x9E, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0x9E, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1F, 0xED, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, - 0x1C, 0x1B, 0x1B, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0x1B, 0x1C, 0x1C, 0xEC, 0x1C, 0x1B, - 0xEA, 0x1B, 0x1C, 0xEC, 0x1D, 0x1D, 0xEC, 0x1C, 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x1F, 0x1E, 0x00, - 0x00, 0x1F, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xDF, 0xDD, 0xDC, 0xDC, 0xDA, 0xDA, 0xD8, 0xD5, 0xCF, 0xDD, 0xDA, 0xDA, 0xD5, 0xDA, - 0xCF, 0x00, 0xDF, 0x1E, 0x1E, 0x00, 0x00, 0x1D, 0x1D, 0x00, 0x17, 0x1E, 0x08, 0x08, 0x1C, 0x1E, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0x00, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, - 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0x9D, 0x9D, 0x9F, 0x9F, - 0x9E, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0x9E, 0x9E, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1E, 0xED, 0x1D, 0x1D, 0xEC, 0x1C, 0x1C, 0x1B, 0x1B, 0xEB, 0xEB, 0xEB, 0x1A, 0xEB, 0x1A, - 0xEB, 0x1A, 0xEB, 0x1B, 0x1C, 0x1C, 0x1B, 0xEA, 0x1B, 0xEA, 0x1C, 0x1C, 0xEC, 0x1D, 0xEC, 0xEA, - 0x1C, 0x1D, 0x1E, 0x00, 0x00, 0x1F, 0x1E, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x00, - 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDE, 0xDC, 0xDC, 0xDA, 0xDA, - 0xD8, 0xCF, 0xCF, 0xDF, 0xDA, 0xDA, 0xCF, 0xD5, 0xCF, 0x00, 0x00, 0x1D, 0x1A, 0x1D, 0x1D, 0x19, - 0x1D, 0x00, 0x17, 0x1E, 0x17, 0x19, 0x08, 0x1C, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0x00, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0x9F, 0x9F, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, - 0xE8, 0xE9, 0xE9, 0xE8, 0x9D, 0x9D, 0x9F, 0x9F, 0x9E, 0xE9, 0x00, 0x00, 0x9E, 0x9E, 0x9E, 0x9E, - 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1E, 0xED, 0x1D, 0xEC, 0xEC, 0x1C, 0xEA, - 0x1B, 0xEB, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0xEB, 0x1A, 0xEB, 0xEB, 0xEB, 0x1B, 0x1B, - 0xEA, 0x1B, 0xEA, 0x1C, 0xEC, 0xEC, 0xEC, 0xEA, 0x1C, 0x1D, 0x1E, 0x00, 0x1F, 0x1E, 0x1E, 0x00, - 0x00, 0x1F, 0x1E, 0xEE, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xDE, 0xDC, 0xDC, 0xDA, 0xD8, 0xD5, 0xCF, 0xD5, 0xDF, 0xDA, 0xD5, 0xCF, 0xD4, - 0xCF, 0xDA, 0x00, 0x00, 0x1C, 0x17, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17, 0x17, 0x08, - 0x08, 0x1D, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9D, 0x9F, 0x9F, - 0x9E, 0xE9, 0x00, 0x00, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0x1E, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1E, 0xED, 0x1D, 0xEC, 0xEC, 0x1C, 0xEA, 0x1B, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, - 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0xEB, 0xEB, 0xEB, 0x1B, 0xEA, 0x1B, 0xEA, 0x1C, 0xEC, 0x1C, 0xEA, - 0x1C, 0x1C, 0x1E, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x1F, 0x1E, 0xEE, 0x1E, 0x1F, 0x00, 0x00, - 0x00, 0x1F, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x00, 0x00, 0xDE, 0xDC, 0xDC, 0xDA, 0xD8, - 0xD5, 0xCF, 0xD5, 0xDF, 0xDA, 0xD5, 0xCF, 0xD4, 0xD5, 0x00, 0xDA, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1A, 0x17, 0x19, 0x08, 0x1D, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE8, - 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0xE9, 0x00, 0x00, 0x9E, 0x9E, 0x9F, 0x9F, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1E, 0xED, 0x1D, 0xEC, 0xEC, 0x1C, 0xEA, - 0x1B, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x1B, 0xEA, 0xEA, 0xEA, - 0xEA, 0x1B, 0x1B, 0x1B, 0xEA, 0x1C, 0x1C, 0x1B, 0x1C, 0x1D, 0x1F, 0x00, 0x1E, 0x1E, 0x1D, 0x1F, - 0x00, 0x1F, 0x1E, 0xEE, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x1D, - 0x1C, 0x1C, 0x1C, 0x00, 0xDD, 0xDC, 0xD8, 0xD7, 0xCF, 0xCF, 0xD5, 0xDC, 0xDF, 0xDF, 0xDF, 0xD5, - 0xDA, 0x00, 0xD5, 0xCF, 0xD6, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x1A, - 0x17, 0x1A, 0x1C, 0x1D, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDF, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE8, - 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0x9E, 0xE9, 0x00, 0x00, 0x9E, 0x9E, 0x9F, 0x9F, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1E, 0xED, 0xEE, 0xEC, 0xEC, 0x1C, 0xEA, 0x1B, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, - 0x1A, 0xEB, 0x1A, 0x1B, 0x1C, 0x1C, 0xEC, 0xEC, 0x1C, 0xEA, 0xEA, 0x1B, 0x1B, 0xEA, 0xEA, 0x1B, - 0x1C, 0x1D, 0x00, 0x1F, 0x1E, 0x1D, 0x1D, 0x1E, 0x00, 0x1F, 0x1E, 0xEE, 0x1D, 0xEE, 0x1F, 0x1F, - 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1C, 0x08, 0x08, 0x19, 0x19, 0x1C, 0xDC, 0xD8, 0xD5, - 0xCF, 0xCF, 0xD5, 0xDA, 0xDA, 0xDA, 0xDA, 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x1A, 0x19, 0x18, 0x1C, 0x1D, 0x1F, 0x00, 0x1F, - 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0x00, 0x00, 0xE9, - 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0x9C, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1E, 0xED, 0xEE, 0xEC, 0xEC, 0x1C, 0xEA, - 0x1B, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0xEB, 0x1A, 0x1B, 0x1C, 0x1C, 0xEC, 0x1C, 0x1C, - 0xEA, 0x1B, 0x1B, 0xEB, 0x1B, 0x1B, 0x1B, 0x1B, 0x1C, 0x1D, 0x00, 0x1F, 0x1E, 0x1C, 0x1D, 0x1E, - 0x00, 0x1F, 0x1E, 0xEE, 0xEC, 0x1D, 0x1E, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1C, 0x08, - 0x08, 0x19, 0x19, 0x19, 0x19, 0x1C, 0xD8, 0xD5, 0xCF, 0xCF, 0xCF, 0xD5, 0xCF, 0xCF, 0xD2, 0xDA, - 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x1F, 0x00, 0x00, - 0x00, 0x00, 0x19, 0x1B, 0x1B, 0x18, 0x1E, 0x00, 0x00, 0x00, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, - 0xDF, 0xDE, 0xDE, 0xDE, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x00, 0xE8, 0x00, 0x00, 0x00, 0xE9, - 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9C, 0x9C, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x18, - 0x07, 0x07, 0x07, 0x32, 0x33, 0x22, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1E, 0xED, 0xEE, 0xEC, 0xEC, 0x1C, 0xEA, 0x1B, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0xEB, - 0x1A, 0x1B, 0x1B, 0xEC, 0xEC, 0xEC, 0x1C, 0xEA, 0x1B, 0x1C, 0x1B, 0x1B, 0xEB, 0x1B, 0x1B, 0x1B, - 0x1C, 0x1E, 0x00, 0x1F, 0x1E, 0x1C, 0x1C, 0x1D, 0x00, 0x1F, 0x1E, 0xEE, 0x1D, 0x1D, 0x1D, 0xED, - 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1C, 0x08, 0x08, 0x19, 0x19, 0x19, 0x17, 0x17, 0x1A, 0xD8, 0xD5, - 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xD2, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0xED, - 0x1E, 0x1E, 0x1F, 0xDF, 0xDF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x16, 0x00, 0x1E, 0xDF, - 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0x00, 0x00, 0x00, - 0xE9, 0xE9, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, - 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0x9F, 0x9F, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x17, 0x13, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x30, 0x31, 0x33, 0x35, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1E, 0xED, 0xEE, 0xEC, 0xEC, 0x1C, 0xEA, - 0x1B, 0xEB, 0xEB, 0xEB, 0x1A, 0x1A, 0xEB, 0x1A, 0x1B, 0x1B, 0x1C, 0x1D, 0x1D, 0x1C, 0xEA, 0x1B, - 0xEA, 0xEA, 0x1D, 0x1B, 0x1B, 0x1B, 0x1B, 0xEA, 0x1D, 0x1E, 0x00, 0x1F, 0x1E, 0x1C, 0x1C, 0x1D, - 0x1F, 0x1F, 0x1E, 0xED, 0x1D, 0xEC, 0x1D, 0xEE, 0x1E, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x00, 0x1C, 0x08, 0x19, - 0x19, 0x08, 0x08, 0x17, 0x17, 0x17, 0x1C, 0xDA, 0xD7, 0xCF, 0xCF, 0xD5, 0xD9, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1D, 0x1D, 0xED, 0x1E, 0xDE, 0xDF, 0xDF, 0xDF, 0x00, 0x00, - 0xDF, 0x00, 0xDE, 0xDE, 0x1B, 0x1D, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, 0xDE, 0xDE, - 0xDD, 0xDD, 0xDD, 0xDD, 0xDD, 0xDE, 0x00, 0x00, 0x00, 0xE9, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0x9F, 0x9F, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x13, 0x0F, 0x0F, 0x11, - 0x12, 0x14, 0x17, 0x17, 0x18, 0x19, 0x32, 0x32, 0x20, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1E, 0x1E, 0xEE, 0x1D, 0xEC, 0x1C, 0x1C, 0x1B, 0x1B, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0x1B, - 0x1B, 0x1C, 0xEC, 0x1D, 0x1C, 0xEA, 0x1B, 0xEA, 0x1B, 0xEA, 0x1D, 0xEA, 0xEA, 0xEA, 0xEA, 0x1C, - 0x1D, 0x1F, 0x00, 0x1F, 0x1D, 0x1C, 0x1C, 0x1D, 0x1F, 0x1F, 0x1E, 0xED, 0x1D, 0xEC, 0xEC, 0x1D, - 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1C, 0x1C, 0x19, 0x08, 0x08, 0x08, 0x08, 0x08, 0x17, 0x17, 0x1A, 0x00, - 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1D, 0x1D, - 0x1D, 0x1E, 0xDE, 0xDE, 0xDF, 0xDF, 0xDF, 0x00, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0x00, 0xDF, 0xDF, - 0xDA, 0xDA, 0xDC, 0xDD, 0xDF, 0xDE, 0xDE, 0xDD, 0xDD, 0xDD, 0xDD, 0xDC, 0xDC, 0xDC, 0xDE, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0x9E, 0x9E, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x17, 0x12, 0x0F, 0x12, 0x14, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x34, 0x22, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1E, 0x1E, 0xEE, 0x1D, 0xEC, 0xEC, 0x1C, - 0x1C, 0x1B, 0x1B, 0xEB, 0xEB, 0xEB, 0x1B, 0x1B, 0x1C, 0xEC, 0x1D, 0x1D, 0x1C, 0x1B, 0xEA, 0x1B, - 0x1B, 0x1C, 0x1E, 0x1E, 0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0x1F, 0x00, 0x1F, 0x1D, 0x1C, 0x08, 0x1C, - 0x1E, 0x1F, 0x1E, 0x1E, 0x1D, 0xEC, 0x1C, 0x1D, 0xEE, 0x1E, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1C, 0x1C, 0x08, 0x08, 0x08, - 0x1A, 0x19, 0x19, 0x1A, 0x17, 0x17, 0x17, 0x1C, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0xEC, 0x1D, 0x1E, 0xDE, 0xDE, 0xDE, 0xDE, 0xDF, 0xDF, 0xDF, - 0x00, 0xDF, 0xDF, 0xDF, 0xDF, 0x00, 0xDE, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDC, 0xDE, 0xDE, 0xDD, - 0xDD, 0xDD, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x9F, 0x9F, 0xE8, 0xE8, 0x9E, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0x9E, 0x9E, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x13, 0x14, 0x15, 0x15, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x1A, 0x08, 0x25, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1E, 0x1E, 0xED, 0xEE, 0x1D, 0xEC, 0xEC, 0x1C, 0x1C, 0x1C, 0x1B, 0x1B, 0x1B, 0x1B, 0x1C, - 0xEC, 0x1D, 0x1E, 0x1D, 0x1C, 0xEA, 0x1B, 0x1B, 0x1C, 0x1D, 0x1F, 0x1E, 0x1D, 0x1D, 0x1D, 0x1E, - 0x1F, 0x00, 0x00, 0x1F, 0x1D, 0x1C, 0x08, 0x1C, 0x1E, 0x1F, 0x1F, 0x1E, 0xEE, 0x1D, 0x1C, 0xEC, - 0x1D, 0xED, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1E, 0x1C, 0x1C, 0x08, 0x08, 0x08, 0x1A, 0x19, 0x18, 0x18, 0x18, 0x1A, 0x17, 0x17, 0x19, - 0x00, 0x1F, 0x1F, 0x1E, 0x1F, 0x1E, 0x1F, 0x1E, 0x1F, 0x1E, 0x1F, 0x1F, 0x1F, 0x1C, 0xEC, 0xEC, - 0x1E, 0xDE, 0xDE, 0xDF, 0xDF, 0xDE, 0xDF, 0xDF, 0xDF, 0x00, 0xDF, 0xDF, 0xDF, 0xDA, 0xD8, 0xDA, - 0xDD, 0xDF, 0xDF, 0xDC, 0xDA, 0xDE, 0xDE, 0xDD, 0xDD, 0xDD, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0x00, 0xE9, 0x00, 0x00, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0x07, 0x07, 0x08, 0x08, 0x1B, 0x19, 0x19, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x19, 0x1A, 0x08, 0x25, 0x1F, 0x1D, 0x1D, 0x1D, 0x1F, 0x1F, 0x1E, 0x1E, 0xED, 0x1D, 0xEC, 0xEC, - 0xEC, 0xEC, 0x1D, 0x1D, 0x1C, 0x1B, 0x1B, 0x1C, 0x1D, 0x1E, 0x1E, 0x1D, 0x1C, 0xEA, 0xEA, 0x1C, - 0x1D, 0x1F, 0x1E, 0x1D, 0x1D, 0x1D, 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x1D, 0x1C, 0x08, 0x1C, - 0x1D, 0x1E, 0x1F, 0x1E, 0xED, 0x1D, 0x1C, 0xEC, 0xEC, 0xED, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1C, 0x1C, 0x08, 0x08, 0x08, 0x1A, - 0x19, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, 0x00, 0x1F, 0x1F, 0x1E, 0x1F, 0x1E, 0x1F, 0x1E, 0x1F, - 0x1E, 0x1F, 0x1E, 0x1E, 0x1F, 0x1C, 0x1C, 0x1E, 0xDE, 0xDE, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, 0xDF, - 0xDF, 0xDF, 0x00, 0xDF, 0x00, 0xD7, 0xD8, 0x00, 0x00, 0xDE, 0xDE, 0xDC, 0xDA, 0xDE, 0xDE, 0xDD, - 0xDD, 0xDD, 0xDC, 0xDC, 0xDC, 0xDB, 0xDB, 0xDC, 0xDE, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x00, - 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, - 0x9E, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x15, 0x18, 0x08, 0x36, 0x23, 0x04, 0x04, 0x2B, - 0x19, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x08, 0x28, 0x1E, 0x1D, 0x1D, - 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0xED, 0x1D, 0x1D, 0xEC, 0x1E, 0x1E, 0x1D, 0xEC, 0x1C, 0x1B, 0xEC, - 0x1D, 0x1E, 0x1D, 0x1D, 0x1D, 0x1C, 0x1D, 0x1E, 0x1F, 0x1F, 0x1E, 0x1D, 0x1D, 0x1E, 0x1F, 0x1F, - 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x08, 0xEB, 0x08, 0x1C, 0x1E, 0x1F, 0x1F, 0x1E, 0xEE, 0xEC, 0x1C, - 0xEC, 0x1D, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x1E, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x1A, 0x19, 0x18, 0x17, 0x17, 0x17, 0x17, 0x1A, 0x18, 0x00, - 0x1F, 0x1F, 0x1F, 0x1E, 0x1F, 0x1E, 0xED, 0xED, 0xED, 0xED, 0xED, 0xED, 0x1E, 0xEA, 0xEA, 0x1E, - 0xDF, 0xDF, 0xDE, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, 0xDE, 0xDE, 0xDE, 0xDF, 0xD6, 0xDE, 0xDA, - 0xDA, 0xDD, 0xDA, 0xDA, 0xDC, 0xDE, 0xDE, 0xDD, 0xDD, 0xDD, 0xDC, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, - 0xDC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x9E, 0x9E, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x12, 0x33, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x2B, 0x1E, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x19, 0x1A, 0x1B, 0x08, 0x08, 0x29, 0x1D, 0x1D, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, - 0x1D, 0x1E, 0x1E, 0x1E, 0x1D, 0xEC, 0xEC, 0x1D, 0x1E, 0x1E, 0x1D, 0x1D, 0x1D, 0x1E, 0x1F, 0x1F, - 0x1E, 0x1E, 0x1D, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x08, 0xEB, 0x08, - 0x1C, 0x1D, 0x1E, 0x1F, 0x1E, 0xED, 0x1D, 0x1C, 0x1C, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1E, 0x00, 0x1D, 0x08, 0x1B, 0x1A, 0x19, - 0x18, 0x17, 0x17, 0x17, 0x17, 0x1A, 0x1A, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0xED, 0xED, 0xEE, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x08, 0x1E, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, - 0xDE, 0xDC, 0xDC, 0xDC, 0xDC, 0xDF, 0xDA, 0xDA, 0xDA, 0xDA, 0xDF, 0xDE, 0xDE, 0xDE, 0xDE, 0xDD, - 0xDD, 0xDD, 0xDC, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0x9E, 0x9E, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x2B, 0x1E, 0x17, 0x18, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x08, 0x08, 0x08, 0x2D, 0x1C, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, - 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x1F, - 0x1F, 0x00, 0x00, 0x1F, 0x1D, 0x08, 0x1A, 0xEB, 0x1C, 0x1D, 0x1E, 0x1F, 0x1F, 0x1E, 0x1D, 0x1C, - 0x1C, 0x1D, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, - 0x1D, 0x1E, 0x00, 0x1D, 0x08, 0x08, 0x08, 0x19, 0x18, 0x17, 0x17, 0x17, 0x17, 0x1C, 0x00, 0x1F, - 0x1F, 0x1F, 0x00, 0x1F, 0xED, 0xED, 0x1D, 0xEC, 0x1C, 0xEC, 0xEC, 0x1D, 0x1E, 0x1A, 0x1A, 0x1E, - 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDC, 0xDA, 0xD9, 0xD9, 0xDA, 0xDA, 0xDA, 0xDA, 0xDA, 0xDB, - 0xDB, 0xDB, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDD, 0xDD, 0xDD, 0xDC, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, - 0xDB, 0xDE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x17, 0x0F, 0x1E, 0x9F, 0x9F, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x18, 0x18, 0x19, 0x19, - 0x19, 0x1A, 0x1B, 0x08, 0x08, 0x08, 0x08, 0x1A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, - 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0x1F, 0x00, 0x1F, 0x1D, 0x08, 0x1A, 0xEB, - 0x08, 0x1C, 0x1E, 0x1E, 0x1F, 0x1E, 0x1D, 0x1C, 0xEC, 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1E, 0x00, 0x1D, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x18, 0x17, 0x17, 0x17, 0x17, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x00, 0xED, 0xED, 0x1D, 0x1D, - 0xEC, 0x1C, 0xEC, 0xEC, 0x1E, 0x1A, 0x1A, 0x1E, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, 0xDA, 0xD7, - 0xD7, 0xD7, 0xD7, 0xD9, 0xD9, 0xDA, 0xDB, 0xDA, 0xDA, 0xD9, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDD, - 0xDD, 0xDC, 0xDC, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x19, 0x07, 0x07, 0x17, 0x1E, 0x9F, 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x08, 0x08, 0x08, 0x19, 0x07, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1D, - 0x1D, 0x1F, 0x00, 0x1F, 0x1D, 0x1B, 0x1A, 0xEB, 0x08, 0x1C, 0x1E, 0x1E, 0x1F, 0x1E, 0xEE, 0x1C, - 0x1D, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, - 0x00, 0x1D, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x08, 0x18, 0x17, 0x17, 0x17, 0x08, 0x00, 0x1E, 0x1D, - 0x08, 0x1E, 0x1E, 0x1F, 0xEE, 0xED, 0xED, 0xEC, 0x1D, 0xEC, 0x1C, 0xEC, 0x1E, 0x1A, 0x1A, 0x1E, - 0xDF, 0x00, 0x00, 0xDF, 0xDF, 0xDA, 0xD5, 0xD3, 0xD3, 0xD6, 0xD7, 0xD9, 0xD9, 0xDB, 0xDA, 0xDA, - 0xD9, 0xD9, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDD, 0xDE, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, - 0xDB, 0xDC, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x07, 0x08, 0x33, 0x07, 0x08, 0x1E, - 0xE8, 0xE8, 0x1F, 0xED, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x1B, 0x19, 0x19, - 0x19, 0x1A, 0x1B, 0x08, 0x08, 0x19, 0x14, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1F, 0x1D, 0x08, 0x1A, 0xEB, - 0x08, 0x1C, 0x1D, 0x1E, 0x1F, 0x1E, 0xEE, 0x1C, 0x1E, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x08, 0x08, 0x1A, 0x1A, 0x18, 0x18, 0x1A, - 0x08, 0x17, 0x17, 0x17, 0x1C, 0x1E, 0x1E, 0x00, 0x08, 0x08, 0x08, 0x1E, 0x1E, 0xEC, 0xED, 0xED, - 0xEA, 0xEA, 0x08, 0x1C, 0x1D, 0x19, 0x19, 0x1E, 0x00, 0xDF, 0xDF, 0x00, 0xDF, 0xD7, 0xD3, 0xD3, - 0xD3, 0xD3, 0xD6, 0xD9, 0xDA, 0xDA, 0xD8, 0xD8, 0xD9, 0xD9, 0xDC, 0xDC, 0xDC, 0xDC, 0xDC, 0xDB, - 0xDD, 0xDC, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x00, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x00, 0x00, 0x07, 0x08, 0x33, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1B, 0x1A, 0x1A, 0x19, 0x19, - 0x18, 0x17, 0x17, 0x16, 0x16, 0x16, 0x07, 0x07, 0x14, 0x14, 0x14, 0x13, 0x12, 0x12, 0x11, 0x11, - 0x11, 0x0F, 0x0F, 0x0F, 0x07, 0x1C, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x08, 0x19, 0x14, 0x0F, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, - 0x1C, 0x1D, 0x1F, 0x1F, 0x1E, 0x08, 0x1A, 0xEB, 0x08, 0x1C, 0x1D, 0x1E, 0x1E, 0x1E, 0x1D, 0x1C, - 0x1E, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, - 0x08, 0x08, 0x1A, 0x1A, 0x18, 0x18, 0x18, 0x18, 0x08, 0x17, 0x17, 0x17, 0x1E, 0x1E, 0x00, 0x1E, - 0x1E, 0x17, 0x08, 0x08, 0x1D, 0x1C, 0xEC, 0xED, 0xEA, 0x1A, 0x08, 0x08, 0x1D, 0x19, 0x19, 0x1E, - 0xDF, 0xDF, 0xDF, 0xDF, 0xDA, 0xD3, 0xD0, 0xD3, 0xD6, 0xD7, 0xD7, 0xDA, 0xDA, 0xD8, 0xD7, 0xD7, - 0xD7, 0xDA, 0xDA, 0xDE, 0xDE, 0xDC, 0xD9, 0xDA, 0xDA, 0xDE, 0xDC, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, - 0xDB, 0xDB, 0x00, 0x9E, 0xE8, 0xE9, 0xE9, 0x9E, 0x9E, 0x9F, 0xE8, 0xE9, 0xE9, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x00, 0x00, 0x07, 0x1C, 0x33, 0x34, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1C, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1F, 0x1E, 0x1D, 0x1C, 0x1C, 0x1A, 0x19, 0x18, 0x17, 0x07, 0x11, 0x07, 0x1A, 0x19, - 0x19, 0x1A, 0x1B, 0x19, 0x14, 0x0F, 0x18, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1E, 0x1D, 0x1D, 0x1C, 0x1C, 0x1D, 0x1F, 0x1E, 0x08, 0xEB, 0x1A, - 0x08, 0x1C, 0x1C, 0x1E, 0x1E, 0x1E, 0x1C, 0x1C, 0x1D, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, - 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x08, 0x08, 0x1A, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x1F, 0x1F, 0x00, 0x1E, 0x1E, 0x1E, 0x17, 0x1D, 0x1D, 0x1C, 0x08, 0xEC, - 0xED, 0x1A, 0x1A, 0x08, 0x1D, 0x17, 0x19, 0x1E, 0xDF, 0xDF, 0xDF, 0x00, 0xDA, 0xD2, 0xD0, 0xD2, - 0xD7, 0xD9, 0xDA, 0xDA, 0xDA, 0xD8, 0xD6, 0xD6, 0xD6, 0xD9, 0xDA, 0xDA, 0xDA, 0xD9, 0xDA, 0xDA, - 0xDA, 0xDF, 0xDE, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x00, 0x9E, 0xE8, 0xE9, 0xE9, 0x9E, - 0x9E, 0x9F, 0xE8, 0xE9, 0xE9, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, - 0x00, 0x00, 0x17, 0x1C, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x1F, 0x00, 0x00, 0x19, 0x15, 0x13, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x15, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x19, 0x14, 0x0F, 0x18, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1C, - 0x1C, 0x1C, 0x1D, 0x1F, 0x1E, 0x08, 0xEB, 0x1A, 0x08, 0x1C, 0x08, 0x1C, 0x1E, 0x1C, 0x08, 0x1C, - 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x1A, - 0x08, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, 0x08, 0x17, 0x17, 0x08, 0x00, 0x1F, 0x1F, 0x00, - 0x1E, 0x1A, 0x1D, 0xED, 0xED, 0x1C, 0x1B, 0x08, 0xED, 0xEC, 0x1A, 0x1A, 0x1B, 0x17, 0x1A, 0x1E, - 0xDF, 0xDF, 0xDF, 0xDC, 0xD7, 0xD0, 0xD1, 0xD2, 0xD7, 0xD9, 0xDA, 0xDA, 0xDA, 0xD8, 0xD6, 0xD4, - 0xD2, 0xD5, 0xD7, 0xDA, 0xD9, 0xDA, 0xDA, 0xDA, 0xDA, 0xDD, 0x00, 0xDE, 0xDB, 0xDB, 0xDB, 0xDB, - 0xDB, 0xDB, 0x00, 0x9E, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9F, 0xE8, 0xE8, 0xE9, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x00, 0x00, 0x17, 0x1D, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x18, 0x11, 0x10, 0x10, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x15, 0x15, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x19, 0x19, 0x14, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, - 0x00, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x1C, 0x1F, 0x1E, 0x1C, 0xEB, 0x1A, - 0x1A, 0x08, 0x08, 0x08, 0x1C, 0x08, 0x08, 0x1D, 0x1D, 0x1E, 0x1E, 0x00, 0x00, 0x1F, 0x1E, 0x1F, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x19, 0x08, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x19, 0x1E, 0x1E, 0x1D, 0x1D, 0x00, 0x1E, 0x1E, 0x1F, 0xED, 0xED, 0xED, 0x1C, 0x1A, - 0xEC, 0xEC, 0x1A, 0x1A, 0x08, 0x1B, 0x1A, 0x1E, 0xDF, 0xDF, 0x00, 0xDC, 0xD5, 0xCF, 0xD1, 0xD2, - 0xD4, 0xD6, 0xDA, 0xDA, 0xD9, 0xD6, 0xD4, 0xD2, 0xD1, 0xD7, 0xD9, 0x1E, 0xD9, 0xD9, 0xDA, 0xDA, - 0xDA, 0xDD, 0xDF, 0x00, 0xDB, 0xDA, 0xDB, 0xDB, 0xDB, 0xDB, 0x00, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, - 0x9E, 0x00, 0x18, 0x1D, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x15, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x1A, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, - 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, 0x00, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1C, - 0x08, 0x08, 0x1C, 0x1F, 0x1E, 0x1C, 0xEB, 0x19, 0x1A, 0x1A, 0x08, 0x08, 0x08, 0x1A, 0x08, 0x1D, - 0x1D, 0x1D, 0x1E, 0x1F, 0x00, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x08, 0x18, - 0x08, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x19, 0x1F, 0x1F, 0x1E, 0x1E, 0x1E, - 0x1E, 0x1C, 0x00, 0xEC, 0xEC, 0xED, 0xED, 0x1B, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x1B, 0x1B, 0x1E, - 0xDF, 0x00, 0x00, 0xDA, 0xD2, 0xD0, 0xD0, 0xD1, 0xD1, 0xD3, 0xD6, 0xD7, 0xD9, 0xD6, 0xD3, 0xD1, - 0xD5, 0xD7, 0x2B, 0xDE, 0x1F, 0xD8, 0xD9, 0xDA, 0xD9, 0xDC, 0xDF, 0x00, 0xDE, 0xDA, 0xDA, 0xDB, - 0xDB, 0xDB, 0x00, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x00, 0x19, 0x1E, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x15, 0x15, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x19, 0x0F, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, 0x00, 0x1E, 0x00, 0x1F, 0x00, 0x00, 0x1F, 0x00, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x08, 0x1F, 0x1E, 0x1C, 0x08, 0x19, - 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x08, 0x1E, 0x1E, 0x1D, 0x1D, 0x1E, 0x1F, 0x1F, 0x1E, 0x1E, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x08, 0x17, 0x18, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x19, 0x08, 0x00, 0x1F, 0x1F, 0x1E, 0x1C, 0x1D, 0x1D, 0x1E, 0x00, 0x1C, 0x1C, 0xEC, 0x1C, - 0x1A, 0x08, 0x1A, 0x19, 0x1A, 0x1D, 0x1C, 0x1D, 0x1E, 0xDF, 0xDF, 0xD7, 0xD2, 0xCF, 0xCF, 0xCF, - 0xCF, 0xD1, 0xD3, 0xD7, 0xD9, 0xD5, 0xD3, 0xCF, 0xD9, 0xDC, 0x1C, 0xDE, 0x00, 0xD6, 0xD8, 0xDA, - 0xD9, 0xDC, 0xDF, 0x00, 0xDE, 0xDD, 0xD9, 0xDB, 0xDB, 0xDB, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, - 0x9F, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, - 0x9E, 0x00, 0x19, 0x1E, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x15, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1E, - 0x1F, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, 0x1C, 0x08, - 0x08, 0x08, 0x08, 0x1F, 0x1E, 0x1D, 0x08, 0x1A, 0x19, 0x1A, 0x1A, 0x18, 0x19, 0x1D, 0x1F, 0x1F, - 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1D, 0x08, 0x1A, - 0x17, 0x1A, 0x1A, 0x17, 0x17, 0x1A, 0x18, 0x17, 0x19, 0x08, 0x08, 0x00, 0x1F, 0x1F, 0x1F, 0x08, - 0x17, 0x08, 0x1C, 0x1D, 0x1B, 0x1A, 0x1B, 0x1B, 0x19, 0x08, 0x1A, 0x19, 0x1A, 0x1D, 0x1C, 0x1D, - 0x1E, 0xDF, 0xDF, 0xD3, 0xD0, 0xCF, 0xD1, 0xD1, 0xCF, 0xCF, 0xD1, 0xD5, 0xD5, 0xD5, 0xD2, 0xCF, - 0xD9, 0xDC, 0x1A, 0x00, 0x00, 0xD5, 0xD7, 0xDA, 0xDB, 0xDD, 0xDF, 0x00, 0xDE, 0xDB, 0xD7, 0xDB, - 0xDB, 0xDB, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0xE9, 0xE9, - 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x00, 0x1A, 0x1F, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x15, 0x15, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x17, - 0x0F, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1E, 0x1F, 0x1E, 0xED, 0xED, 0x1F, 0x00, 0x00, 0x1F, 0x1E, - 0x1E, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, 0x1C, 0x08, 0x08, 0x08, 0x08, 0x1F, 0x1E, 0x1D, 0x1C, 0x1A, - 0x19, 0x19, 0x17, 0x19, 0x19, 0x1C, 0x1D, 0x1F, 0x1E, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1F, 0x00, - 0x00, 0x00, 0x1F, 0x1E, 0x1D, 0x1C, 0x1B, 0x08, 0x1A, 0x17, 0x17, 0x18, 0x17, 0x18, 0x1C, 0x1C, - 0x1C, 0x1F, 0x00, 0x1E, 0x00, 0x1E, 0x1D, 0x1D, 0x08, 0x17, 0x08, 0x1D, 0x1B, 0x1B, 0x1A, 0x1A, - 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x1B, 0x1D, 0x1D, 0x1E, 0x1F, 0xDF, 0xD3, 0xCF, 0xCF, 0xCF, 0xD3, - 0xD8, 0xD6, 0xD1, 0xD2, 0xD5, 0xD4, 0xD5, 0xD1, 0xD9, 0xDC, 0x9C, 0x00, 0xDB, 0xD4, 0xD6, 0xDA, - 0xDD, 0xDE, 0xDF, 0x00, 0xDE, 0xDA, 0xD7, 0xD9, 0xDB, 0xDB, 0x00, 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x00, 0x1A, 0x1F, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2F, - 0x00, 0x00, 0x12, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x15, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, - 0xED, 0x1D, 0x1D, 0xED, 0x1F, 0x00, 0x1F, 0x1E, 0xEE, 0x1E, 0x1F, 0x1F, 0x1E, 0x1D, 0x1C, 0x08, - 0x08, 0x08, 0x08, 0x1E, 0x1E, 0x1D, 0x1C, 0x08, 0x19, 0x19, 0x17, 0x19, 0x1A, 0x1C, 0x1C, 0x1D, - 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1D, 0x1B, 0x1A, 0x08, - 0x08, 0x08, 0x18, 0x17, 0x17, 0x18, 0x19, 0x08, 0x1D, 0x00, 0x00, 0x1F, 0x00, 0x1E, 0x1E, 0x08, - 0x08, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, 0x1B, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x1A, 0x1D, 0x1D, - 0x1E, 0x1F, 0x1F, 0xD3, 0xCF, 0xCF, 0xCF, 0xCF, 0x19, 0xD8, 0xD8, 0xD5, 0xD8, 0xD7, 0xD7, 0xD5, - 0xD9, 0xD9, 0x1E, 0x00, 0xD3, 0xD4, 0xD8, 0xDC, 0xDE, 0xDF, 0xDF, 0xDE, 0xDA, 0xD7, 0x3F, 0xD8, - 0xDB, 0xDB, 0x00, 0x9E, 0x9E, 0xE9, 0xE9, 0xE8, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, - 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0xE8, 0xE8, 0x9F, 0x9F, 0xE9, 0x08, 0x1E, 0x35, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2F, 0x00, 0x00, 0x18, 0x0F, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x15, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x0F, - 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1E, 0x1E, 0xED, 0x1D, 0xEC, 0x1D, 0xED, 0x1F, 0x00, 0x1F, - 0xEE, 0xEE, 0x1F, 0x1F, 0x1E, 0x1D, 0x1C, 0x08, 0x08, 0x08, 0x08, 0x1E, 0x1E, 0x1C, 0x1D, 0x08, - 0x1A, 0x18, 0x17, 0x19, 0x1A, 0x08, 0x1C, 0x1D, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1F, 0x00, - 0x00, 0x1F, 0x1F, 0x1E, 0x1D, 0x1C, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x17, 0x1A, 0x1B, - 0x1F, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0xED, 0xED, 0xED, 0xED, 0xED, 0xEC, 0x08, - 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x1A, 0x1C, 0x1E, 0x1E, 0x1F, 0x1F, 0xD3, 0xCF, 0xCF, 0xD2, 0xCF, - 0x18, 0xDA, 0xD4, 0xD8, 0xD8, 0xDA, 0xD8, 0xD8, 0xD9, 0xDE, 0x2E, 0x00, 0xD1, 0xD4, 0xDA, 0xDA, - 0xDD, 0x00, 0xDB, 0xD7, 0xD7, 0x3F, 0x3F, 0xD7, 0xDB, 0xDC, 0x00, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE8, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, - 0x9F, 0xE9, 0x1E, 0x1C, 0x1E, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x2A, 0x2E, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x2F, 0x2D, 0x2C, 0x2B, 0x29, 0x04, 0x04, 0x04, 0x04, 0x24, 0x22, - 0x36, 0x36, 0x34, 0x0C, 0x33, 0x32, 0x31, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1E, - 0xED, 0x1D, 0xEC, 0xEC, 0x1D, 0x1E, 0x1F, 0x1F, 0x1E, 0xEE, 0x1E, 0x1F, 0x1E, 0x1D, 0x1C, 0x08, - 0x08, 0x08, 0x08, 0x1E, 0x1D, 0x1C, 0x1C, 0x08, 0x1A, 0x18, 0x17, 0x18, 0x1A, 0x08, 0x1C, 0x1C, - 0x1D, 0x1E, 0x1D, 0x1C, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x1E, 0x1E, 0x1E, 0x1D, 0x08, 0x17, 0x18, - 0x1A, 0x19, 0x19, 0x19, 0x17, 0x17, 0x1C, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, - 0x00, 0xED, 0xED, 0xED, 0xED, 0x1E, 0x1E, 0x1E, 0x08, 0x08, 0x1A, 0x19, 0x19, 0x1A, 0x1B, 0x1E, - 0x1E, 0x1F, 0x1F, 0xD3, 0xCF, 0xCF, 0xD2, 0xCD, 0x19, 0xDA, 0xD3, 0xD8, 0xDA, 0xDA, 0xD5, 0xD7, - 0xDA, 0xDD, 0x00, 0xDB, 0xCF, 0xD5, 0xDA, 0xDD, 0xDE, 0xDF, 0x00, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, - 0xDB, 0xDD, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, - 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE8, 0xE8, 0xE8, 0x9F, 0xE9, 0xE9, 0x1E, 0x1C, 0x1E, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x1F, 0x1D, 0x1C, 0x1C, 0x2D, 0x2B, 0x2A, 0x04, - 0x25, 0x36, 0x35, 0x33, 0x32, 0x31, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x33, 0x32, 0x31, 0x0F, 0x07, - 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1F, 0x1F, 0x00, - 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x1F, 0x1E, 0x1E, 0xED, 0xEC, 0xEC, 0x1D, 0xED, 0x1E, 0x1E, - 0x1E, 0x1D, 0xEE, 0x1F, 0x1F, 0x1D, 0x1D, 0x1C, 0x08, 0x1A, 0x08, 0x1E, 0x1D, 0x08, 0x1C, 0x1D, - 0x08, 0x19, 0x17, 0x18, 0x19, 0x08, 0x08, 0x1C, 0x1D, 0x1F, 0x1D, 0x1C, 0x1D, 0x1E, 0x1F, 0x00, - 0x00, 0x1E, 0x1C, 0x1E, 0x1D, 0x08, 0x18, 0x17, 0x17, 0x18, 0x18, 0x18, 0x17, 0x19, 0x1D, 0x1F, - 0x1F, 0xED, 0xED, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xED, 0x1E, 0x1E, 0x1E, 0x1E, 0x08, - 0x08, 0x1A, 0x08, 0x19, 0x19, 0x1A, 0x1A, 0xEC, 0x1F, 0x1F, 0x1F, 0xD8, 0xCF, 0xD1, 0xD2, 0xCD, - 0x1A, 0xDA, 0xD3, 0xD8, 0xDA, 0xDA, 0xD1, 0xD7, 0xD7, 0xDA, 0xDE, 0xD5, 0xD1, 0xD8, 0xDC, 0xDF, - 0xDF, 0xDF, 0xDF, 0xDD, 0x3F, 0x3F, 0x3F, 0x3F, 0xDB, 0xDE, 0x00, 0xE9, 0xE9, 0x00, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0x00, 0x1E, 0x1D, 0x1E, 0x26, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x00, 0x00, 0x08, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x00, 0x00, 0x1F, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x00, 0x1F, 0x00, 0x1F, 0x00, 0x1F, 0x1F, 0x1E, - 0x1E, 0xED, 0x1D, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1D, 0x1D, 0xEE, 0x1F, 0x1E, 0x1D, 0x1D, - 0x1C, 0x1A, 0x08, 0x1E, 0x1D, 0x08, 0x1C, 0x1E, 0x08, 0x19, 0x17, 0x17, 0x19, 0x08, 0x08, 0x1C, - 0x1C, 0x1F, 0x1D, 0x1D, 0x1C, 0x1E, 0x1F, 0x00, 0x00, 0x1E, 0x1C, 0x1D, 0x1E, 0x08, 0x08, 0x18, - 0x17, 0x17, 0x17, 0x17, 0x18, 0x1A, 0x08, 0x1F, 0x1F, 0xED, 0xED, 0xED, 0x1F, 0xED, 0xED, 0x1F, - 0x1F, 0x00, 0xED, 0x1E, 0x1E, 0x1E, 0x08, 0x08, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEC, - 0x1F, 0x1F, 0x1F, 0xD8, 0xD6, 0xD2, 0xD6, 0xCF, 0x1B, 0xDA, 0xD6, 0xDA, 0xDA, 0xDA, 0xD6, 0xD3, - 0xD6, 0xD6, 0xDB, 0xD7, 0xD3, 0xD5, 0xD8, 0xDF, 0x00, 0x00, 0xDD, 0xD8, 0x3F, 0x3F, 0x3F, 0x3F, - 0xDC, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x15, 0x17, 0x18, 0x1A, 0x1B, 0x1C, - 0x1E, 0x29, 0x26, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x1D, 0x17, 0x08, 0x07, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0xED, 0xEE, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0x1E, 0x1E, 0x1D, 0x1C, 0xEC, 0x1D, 0x1E, 0x1E, - 0xEE, 0x1D, 0x1C, 0x1D, 0x1E, 0x1D, 0x1D, 0x1C, 0x08, 0x1A, 0x08, 0x1E, 0x1D, 0x08, 0x1C, 0x1D, - 0x1D, 0x1A, 0x18, 0x17, 0x19, 0x1A, 0x08, 0x08, 0x1C, 0x1D, 0x1E, 0x1D, 0x1C, 0x1D, 0x1E, 0x00, - 0x00, 0x1E, 0x1C, 0x1C, 0x1E, 0x1C, 0x08, 0x1A, 0x18, 0x18, 0x1A, 0x18, 0x18, 0x17, 0x08, 0x1F, - 0xED, 0xED, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0xED, 0xED, 0x1F, 0x00, 0x00, 0x1E, 0x1D, 0x08, 0x1A, - 0x1A, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0xEC, 0x1E, 0x1F, 0x00, 0xDC, 0xD5, 0xD5, 0xDA, 0xD6, - 0x1D, 0xDE, 0xD9, 0xD8, 0xDA, 0xDE, 0xCF, 0xD1, 0xD2, 0xD5, 0xDB, 0xD9, 0xD7, 0xD9, 0xDC, 0x00, - 0xDB, 0xD7, 0x3F, 0x3F, 0x3F, 0xD8, 0x3F, 0xDB, 0xDE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x17, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2E, 0x2B, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x19, 0x0F, 0x08, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x07, 0x07, - 0x07, 0x17, 0x19, 0x1A, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0xEE, 0xEE, 0x1E, 0x1F, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, - 0x1E, 0x1E, 0x1D, 0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0xEE, 0x1D, 0x1C, 0x1D, 0x1D, 0x1D, 0x1C, 0x08, - 0x1A, 0x19, 0x08, 0x1E, 0x1D, 0x08, 0x1C, 0x1C, 0x1E, 0x1A, 0x18, 0x17, 0x18, 0x19, 0x08, 0x08, - 0x1C, 0x1C, 0x1F, 0x1D, 0x1C, 0x1C, 0x1D, 0x00, 0x00, 0x1F, 0x1E, 0x1C, 0x1D, 0x1E, 0x08, 0x08, - 0x08, 0x1A, 0x19, 0x18, 0x17, 0x17, 0x1C, 0xED, 0xED, 0xED, 0x08, 0x1B, 0x1C, 0x1C, 0x1B, 0x1C, - 0x1C, 0x1D, 0x1F, 0x00, 0x00, 0x1E, 0x08, 0x1A, 0x1A, 0x1A, 0x1A, 0x18, 0x18, 0x1A, 0xEB, 0xEC, - 0x1E, 0x1F, 0x00, 0x00, 0xDC, 0xDC, 0x00, 0xD9, 0x1E, 0xDF, 0xDC, 0xDC, 0xDE, 0xDE, 0xD1, 0xD3, - 0xD6, 0xDA, 0x00, 0x00, 0xDD, 0xDC, 0xDE, 0xDF, 0x00, 0xDE, 0xDD, 0xDB, 0xD8, 0x3F, 0xDB, 0xDE, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x17, 0x0F, 0x08, 0x17, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x07, 0x0F, 0x0F, 0x31, 0x32, 0x32, 0x33, 0x33, 0x34, 0x35, 0x26, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x1E, 0xEE, - 0xEE, 0x1E, 0x1E, 0x1E, 0x1E, 0xED, 0xED, 0xED, 0x1E, 0x1E, 0x1D, 0x1C, 0x08, 0x1C, 0x1D, 0x1D, - 0x1D, 0x1C, 0x08, 0x1C, 0x1D, 0x1C, 0x08, 0x1A, 0x19, 0x19, 0x08, 0x1E, 0x1D, 0x1A, 0x08, 0x1C, - 0x1E, 0x08, 0x18, 0x17, 0x17, 0x18, 0x1A, 0x1B, 0x1B, 0x1C, 0x1F, 0x1D, 0x1C, 0x1B, 0x1D, 0x00, - 0x00, 0x00, 0x1E, 0x1C, 0x08, 0x19, 0x1C, 0x1A, 0x1A, 0x1A, 0x19, 0x17, 0x17, 0x1B, 0x1D, 0xED, - 0xED, 0x1D, 0x08, 0x1A, 0x1A, 0x1A, 0x1B, 0x1B, 0x19, 0x08, 0x1D, 0x1E, 0x00, 0x1E, 0x1D, 0x1D, - 0x1C, 0x1A, 0x1A, 0x18, 0x17, 0x1A, 0xEB, 0xEC, 0x1E, 0x1F, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xDE, 0xD7, 0xD9, 0xDD, 0xDF, 0x9F, 0x00, 0x00, 0xDF, 0xDF, 0x00, - 0xDE, 0xDB, 0xDA, 0xD8, 0xDB, 0xDB, 0xDE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x19, 0x1F, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x08, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x07, 0x0F, 0x15, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x35, 0x20, 0x24, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0xEE, 0x1D, 0xEE, 0xEE, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1E, 0x1D, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x08, 0x08, 0x19, - 0x18, 0x19, 0x08, 0x1E, 0x1D, 0x1A, 0x08, 0x1C, 0x1D, 0x1D, 0x1A, 0x18, 0x17, 0x18, 0x18, 0x1A, - 0x1B, 0x1C, 0x1D, 0x1F, 0x1C, 0x1B, 0x1B, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x08, 0x08, 0x19, 0x19, - 0x19, 0x19, 0x17, 0x18, 0x18, 0x1D, 0x1B, 0x1A, 0xED, 0x1D, 0x1B, 0x19, 0x19, 0x19, 0x1A, 0x1B, - 0x19, 0x19, 0x1C, 0x1D, 0x08, 0x00, 0x1D, 0x1C, 0x1A, 0x18, 0x18, 0x17, 0x18, 0x1A, 0xEB, 0x1D, - 0x1E, 0x1F, 0xE8, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0xDE, 0xDF, - 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x00, 0x00, 0xDE, 0xDD, 0xDB, 0xDB, 0xDB, 0xDE, 0xDE, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1B, 0x1E, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x08, 0x18, 0x1D, 0x1D, - 0x1D, 0x08, 0x07, 0x12, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x1A, 0x22, - 0x27, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0xEE, 0x1D, - 0x1D, 0x1D, 0x1D, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0xEC, 0x1D, 0xEC, 0xEC, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x1A, 0x08, 0x08, 0x08, 0x1B, 0x1A, 0x18, 0x18, 0x1A, 0x08, 0x1E, 0x1D, 0x19, 0x08, 0x1C, - 0x1C, 0x1E, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x19, 0x1A, 0x1B, 0x1C, 0x1F, 0x1D, 0x1B, 0x1A, 0x1D, - 0x00, 0x1E, 0x00, 0x1F, 0x1D, 0x08, 0x19, 0x17, 0x17, 0x17, 0x18, 0x18, 0x1B, 0x1B, 0x18, 0x18, - 0x1D, 0x08, 0x1A, 0x19, 0x17, 0x17, 0x19, 0x1B, 0x19, 0x19, 0x1C, 0x1A, 0x1A, 0x08, 0x1D, 0x1A, - 0x18, 0x17, 0x17, 0x17, 0x19, 0x1A, 0x1B, 0x1D, 0x1E, 0x1F, 0xE8, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, - 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x00, 0xDE, - 0xDE, 0xDE, 0xDE, 0xDD, 0xDD, 0x00, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x00, 0x00, 0x00, 0x00, 0xE8, - 0xE8, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x1C, 0x1D, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x1C, 0x07, 0x0F, 0x08, 0x18, 0x1D, 0x1D, 0x08, 0x07, 0x13, 0x04, 0x04, 0x04, 0x19, 0x18, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x24, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1E, 0x1E, 0xEE, 0xEE, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, - 0x1C, 0x1D, 0x1D, 0xEC, 0x1D, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x08, 0x08, 0x1B, 0x1B, 0x19, 0x17, - 0x19, 0x1A, 0x08, 0x1D, 0x1F, 0x19, 0x1B, 0x1C, 0x1C, 0x1E, 0x1C, 0x1A, 0x17, 0x16, 0x16, 0x17, - 0x1A, 0x1B, 0x08, 0x1D, 0x1F, 0x1C, 0x19, 0x08, 0x00, 0x1E, 0x1D, 0x1C, 0x1C, 0x1D, 0x08, 0x19, - 0x18, 0x18, 0x1A, 0x19, 0x19, 0x18, 0x17, 0x17, 0x1C, 0x08, 0x19, 0x17, 0x17, 0x17, 0x17, 0x19, - 0x19, 0x18, 0x1C, 0x1A, 0x1A, 0x1A, 0x08, 0x1A, 0x18, 0x17, 0x17, 0x17, 0x19, 0xEB, 0x1C, 0x1D, - 0x1E, 0x1F, 0xE8, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9F, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x1C, 0x1D, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2F, 0x00, 0x1D, 0x18, 0x0F, 0x0F, 0x08, 0x19, 0x1D, 0x1D, - 0x08, 0x00, 0x04, 0x04, 0x1D, 0x1D, 0x1D, 0x1B, 0x18, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x1A, 0x25, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0xEE, 0xEE, 0x1D, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, - 0x1C, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1C, 0x1C, 0x1D, 0x08, 0x1A, 0x1A, 0x19, - 0x1A, 0x1A, 0x08, 0x08, 0x1B, 0x1A, 0x18, 0x17, 0x1A, 0x08, 0x08, 0x08, 0x1F, 0x1A, 0x1A, 0x1C, - 0x1C, 0x1D, 0x1D, 0x1A, 0x18, 0x16, 0x16, 0x18, 0x1A, 0x1A, 0x1B, 0x1C, 0x1F, 0x1D, 0x1A, 0x19, - 0x1D, 0x00, 0x1D, 0x1C, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1A, 0x08, 0x19, 0x18, 0x17, 0x17, 0x1B, - 0x08, 0x19, 0x19, 0x17, 0x17, 0x17, 0x17, 0x19, 0x18, 0x17, 0x08, 0x19, 0x19, 0x18, 0x08, 0x1D, - 0x18, 0x17, 0x17, 0x17, 0x19, 0xEB, 0x1C, 0x1D, 0x1E, 0x1F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE9, - 0xE9, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x00, 0x00, - 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE8, - 0xE8, 0xE9, 0xE9, 0xE8, 0x9E, 0x9E, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0x9C, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9C, 0x1D, 0x1C, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x2A, 0x2E, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x08, 0x19, 0x1D, 0x1D, 0x1D, 0x04, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1B, 0x18, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x27, 0x2A, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0xEC, 0xEC, 0xEC, 0x1C, 0x1C, 0x08, 0x08, 0x08, 0x08, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, - 0x08, 0x1A, 0x08, 0x1A, 0x1A, 0x1A, 0x19, 0x1A, 0x1A, 0x08, 0x08, 0x08, 0x1B, 0x19, 0x17, 0x18, - 0x1A, 0x08, 0x08, 0x1A, 0x1D, 0x1B, 0x19, 0x1B, 0x1C, 0x1D, 0x1E, 0x1C, 0x18, 0x18, 0x18, 0x18, - 0x1A, 0x1A, 0x1B, 0x1D, 0x1E, 0x1F, 0x1C, 0x1B, 0x1C, 0x00, 0x00, 0x1D, 0x1A, 0x19, 0x19, 0x19, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x19, 0x08, 0x19, 0x19, 0x17, 0x17, 0x17, 0x17, 0x17, 0x19, - 0x17, 0x17, 0x08, 0x19, 0x18, 0x17, 0x18, 0x08, 0x1A, 0x17, 0x17, 0x18, 0x1A, 0x1C, 0xEC, 0x1D, - 0x1E, 0xE9, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x00, 0x00, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE8, 0x1F, 0xE8, 0x9E, 0x9F, 0xE9, - 0xE9, 0xE9, 0xE9, 0x9C, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9C, 0x1D, 0x1C, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x00, 0x07, 0x1A, 0x08, 0x08, 0x08, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x1A, 0x1B, 0x28, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0xEC, 0xEC, 0x1C, 0x1C, 0x08, 0x08, 0x08, 0x08, - 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, - 0x08, 0x1C, 0x08, 0x08, 0x1A, 0x18, 0x17, 0x19, 0x1A, 0x08, 0x08, 0x1A, 0x1C, 0x1D, 0x19, 0x1B, - 0x1C, 0x1D, 0x1E, 0x1C, 0x1B, 0x1B, 0x1A, 0x1A, 0x1A, 0x1B, 0x1B, 0x1D, 0x1D, 0x1E, 0x1D, 0x1D, - 0x1D, 0x1D, 0x00, 0x00, 0x08, 0x1A, 0x19, 0x19, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x19, 0x19, 0x17, 0x17, 0x18, 0x18, - 0x1C, 0x17, 0x18, 0x18, 0xEB, 0x1C, 0x1D, 0x1E, 0x1F, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x00, 0x00, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9D, 0x9D, 0x9F, 0x9F, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0x9F, 0xE9, 0xE9, 0xE8, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9E, 0x9E, 0x08, 0x1C, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x19, 0x07, 0x17, 0x19, 0x18, 0x17, 0x16, 0x16, 0x14, 0x14, 0x13, 0x12, 0x12, 0x11, 0x11, 0x0F, - 0x0F, 0x12, 0x15, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x26, 0x20, 0x1D, 0x1D, 0x1D, 0x1D, - 0xEC, 0x1C, 0x08, 0x08, 0x08, 0xEB, 0xEB, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, - 0x19, 0x18, 0x18, 0x18, 0x19, 0x1A, 0x1A, 0x08, 0x1C, 0x08, 0x08, 0x1A, 0x19, 0x17, 0x17, 0x19, - 0x08, 0x08, 0x08, 0x1A, 0x08, 0x1E, 0x1B, 0x19, 0x1D, 0x1D, 0x1E, 0x1C, 0x1C, 0x1B, 0x1B, 0x1B, - 0x1B, 0x1C, 0x1D, 0x1D, 0x1F, 0x1F, 0x1E, 0x1D, 0x1D, 0x1E, 0x1E, 0x00, 0x00, 0x08, 0x08, 0x19, - 0x19, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x19, 0x17, 0x17, 0x17, 0x18, 0x19, 0x1B, 0x18, 0x18, 0x19, 0x1B, 0x1D, 0x1D, 0x1E, - 0x1F, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9D, 0x9D, 0x9F, - 0x9F, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0x9E, 0xE8, - 0xE8, 0xE8, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x08, 0x08, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x1E, 0x1E, 0x1D, 0x1C, 0x1C, 0x1C, 0x08, 0x1A, 0x18, 0x13, 0x10, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x1A, 0x1A, 0x33, 0x37, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x08, 0xEB, 0x1A, 0x1A, 0x1A, - 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x18, 0x18, 0x17, 0x18, 0x19, 0x19, 0x1A, 0x08, 0x1C, - 0x1D, 0x08, 0x08, 0x19, 0x18, 0x17, 0x19, 0x1A, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x1D, 0x1F, 0x1B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1C, 0x1C, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1E, - 0x1E, 0x1E, 0x1E, 0x1E, 0x00, 0x00, 0x1D, 0x1B, 0x19, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x19, 0x17, 0x17, 0x17, 0x17, 0x18, 0x19, - 0x1B, 0x19, 0x1A, 0x1A, 0x1C, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0x9E, 0xE3, 0x00, 0x00, 0x00, 0x00, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9D, 0x9D, 0x9C, 0x9C, 0x18, 0x08, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x1C, 0x17, 0x14, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x15, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x31, 0x33, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0x08, 0xEB, 0xEB, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x18, 0x18, 0x18, 0x17, - 0x17, 0x18, 0x19, 0x19, 0x08, 0x08, 0x1C, 0x1D, 0x1C, 0x08, 0x19, 0x18, 0x17, 0x17, 0x19, 0x08, - 0x08, 0x1A, 0x1A, 0x1A, 0x1A, 0x1B, 0x1E, 0x1F, 0x1F, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1F, 0x00, 0x9E, 0x9E, 0x9F, 0x9F, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, - 0x1B, 0x1B, 0x19, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x18, 0x18, 0x1A, 0x1B, 0x1A, 0x1A, 0x1B, 0x1D, 0x1D, 0x1F, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE8, 0xE8, - 0xE9, 0x9E, 0xE3, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0x9E, 0x9E, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9C, 0x9C, 0x9E, 0x18, 0x08, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x11, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, - 0x31, 0x12, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0xEB, 0xEB, 0x1A, 0x1A, 0x19, 0x19, 0x19, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x17, 0x17, 0x17, 0x18, 0x19, 0x1A, 0x08, 0x1C, 0x1C, 0x1D, 0x1C, - 0x08, 0x19, 0x18, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1A, 0x1A, 0x1A, 0x1A, 0x1B, 0x1B, 0x1D, 0x00, - 0x00, 0x1F, 0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x00, 0xE9, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, - 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x1D, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x18, 0x19, 0x1A, - 0x1B, 0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9E, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE9, - 0xE9, 0xE8, 0x9D, 0x9C, 0x9C, 0x9E, 0x9E, 0x16, 0x08, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x15, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x31, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0xEB, 0x1A, 0x1A, 0x19, 0x18, 0x18, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x18, 0x19, - 0x1A, 0x1A, 0x08, 0x1C, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x18, 0x17, 0x18, 0x19, 0x1A, 0x1A, 0x1A, - 0x1A, 0x1B, 0x1B, 0x1C, 0x1C, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0xE9, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x1B, 0x1B, 0x1A, 0x19, 0x1B, 0x1A, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x1B, 0xEC, 0xEC, 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0x1F, - 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0x9E, 0x9C, 0x9C, 0xE9, 0xE9, 0x9E, - 0x14, 0x12, 0x18, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x07, 0x0F, - 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1A, 0x1A, 0x19, 0x18, 0x18, 0x18, - 0x17, 0x17, 0x17, 0x17, 0x18, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1C, 0x1D, 0x1E, 0x1D, 0x1C, 0x1A, - 0x18, 0x17, 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1B, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0xE9, - 0xE9, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, - 0x9E, 0x9E, 0x9F, 0x9F, 0x9C, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0x00, 0x1D, 0x1A, - 0x1B, 0x1D, 0x1C, 0xEB, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0xEB, 0x1B, 0x1C, 0xEC, - 0x1D, 0x1D, 0x1D, 0x1E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0x1F, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE8, 0x9E, 0x9C, 0x9C, 0xE9, 0xE9, 0x9E, 0x9E, 0x17, 0x0F, 0x18, 0x28, 0x29, 0x2B, 0x2F, - 0x00, 0x00, 0x12, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x15, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x18, 0x18, 0x11, 0x0F, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1C, 0x1C, 0x1B, 0x1A, 0x1A, 0x1A, 0x1A, 0x18, 0x18, 0x18, 0x18, 0x1B, 0x1B, 0x1B, 0x1C, - 0x1C, 0x1D, 0x1D, 0x1E, 0x1D, 0x1C, 0x1A, 0x19, 0x19, 0x1A, 0x1B, 0x1B, 0x1B, 0x1C, 0x1C, 0x1D, - 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE9, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0xE9, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x1E, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1C, 0x1C, 0x1C, - 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0xE8, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, - 0x9E, 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9D, 0x9F, 0x9F, 0x9D, - 0x9D, 0x9D, 0x18, 0x0F, 0x0F, 0x18, 0x00, 0x00, 0x00, 0x1B, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x13, 0x0F, 0x17, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, - 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x1E, 0x1D, 0x1C, 0x1A, 0x1B, 0x1B, - 0x1B, 0x1B, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1E, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0xE9, 0x9F, 0x9F, - 0xE9, 0x00, 0x00, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0xE9, 0xE9, 0x9E, 0x9E, 0x9E, - 0x9E, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, - 0x1E, 0x1F, 0xE8, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE4, 0xE4, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE8, 0xE9, 0xE8, 0xE8, 0x9D, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x1B, 0x18, 0x0F, 0x12, 0x00, - 0x00, 0x17, 0x0F, 0x11, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x15, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x17, 0x14, 0x0F, 0x12, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1E, 0x1E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1D, 0x1C, 0x1B, 0x1B, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0xE8, 0xE8, 0xE8, - 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE9, 0x00, 0x00, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, - 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x00, 0x1F, 0x1F, 0x1E, - 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x00, 0xE8, 0x9E, 0x9E, 0x9C, 0x9C, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9C, 0x9C, 0x9E, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, - 0x9C, 0x9C, 0x9D, 0x9D, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9E, 0x9E, 0x9C, - 0x9C, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE4, 0x00, 0xE9, 0xE4, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE9, 0xE9, 0xE8, 0x9E, 0x9E, 0x9E, 0x9D, - 0x9D, 0x9D, 0x9D, 0x1F, 0x1F, 0x1B, 0x18, 0x12, 0x07, 0x10, 0x10, 0x11, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x14, 0x0F, 0x11, 0x19, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1E, 0xE8, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, - 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, - 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE8, 0xE9, 0xE9, 0xE9, - 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, - 0x00, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9C, 0x9C, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, 0x9E, 0x9E, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0xE4, 0x1F, - 0xE4, 0xE9, 0xE4, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0xE9, 0x9F, 0x9F, 0x9F, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x1F, 0x1F, 0x1D, 0x1D, 0x29, - 0x26, 0x21, 0x35, 0x23, 0x23, 0x27, 0x27, 0x04, 0x04, 0x04, 0x22, 0x36, 0x35, 0x34, 0x34, 0x33, - 0x32, 0x07, 0x14, 0x0F, 0x11, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, - 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE9, 0x00, 0x00, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, - 0x9E, 0x9E, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9E, 0x00, 0x00, 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9E, - 0x9E, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE4, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0x9E, 0x9E, 0x9F, - 0x9F, 0x9D, 0x9D, 0x1F, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x2B, 0x2B, 0x04, 0x26, 0x22, 0x37, 0x34, 0x32, 0x31, 0x0F, 0x12, 0x18, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, - 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0xE9, 0x00, 0x00, 0x9F, 0x9F, 0xE8, 0xE8, 0xE9, 0x9E, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x00, - 0x00, 0x9E, 0x9E, 0x9E, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9E, 0x9E, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, - 0xE4, 0xE9, 0xE9, 0xE4, 0xE4, 0xE9, 0xE8, 0xE8, 0xE8, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x1D, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x16, 0x07, 0x07, 0x07, 0x32, - 0x32, 0x33, 0x33, 0x34, 0x34, 0x35, 0x36, 0x21, 0x22, 0x24, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE9, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, - 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9C, 0x9C, 0x9D, 0x9D, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0x00, 0xE4, 0xE9, 0xE9, 0xE4, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x1D, 0x18, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x00, 0x16, 0x13, 0x12, 0x12, 0x13, - 0x13, 0x08, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, - 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x00, - 0x00, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9C, - 0x9C, 0x9D, 0x9D, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE9, 0xE4, 0xE9, 0xE9, 0x00, 0xE9, 0x00, 0xE9, 0x00, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0x1D, 0x08, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x19, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x17, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9F, 0x9F, 0xE8, 0xE8, 0xE8, 0xE8, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE8, 0xE8, 0x9F, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, - 0x9F, 0x9F, 0x9F, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9C, - 0x9C, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xE9, 0xE9, 0xE4, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x08, 0x18, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x19, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1F, 0xE9, 0x1F, 0xE9, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0xE8, 0xE8, 0x9E, 0x9E, 0x9E, 0x9E, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, 0xE8, - 0xE8, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0x00, - 0x00, 0x9F, 0x9C, 0x9C, 0xE9, 0xE9, 0xE9, 0xE9, 0x9C, 0x9C, 0x9C, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9E, 0x9E, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0xE8, 0x00, 0x00, 0x00, 0x00, 0xE9, - 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, 0xE9, - 0xE9, 0xE9, 0x1D, 0x08, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x17, 0x19, 0x28, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x1F, 0x1F, 0x9F, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x1F, 0x1F, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, - 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x9A, 0x00, 0x00, 0x00, 0x9F, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9B, 0x9B, - 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x08, 0x1D, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x17, 0x1D, 0x2B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, - 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x99, - 0x9A, 0x9F, 0x1F, 0x9F, 0x98, 0x98, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x99, - 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x98, 0x98, - 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x1F, - 0x1F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x98, 0x99, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x08, 0x1D, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x17, 0x00, 0x08, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x9B, 0x9B, 0x9B, 0x99, 0x97, 0x97, 0x9A, 0x9A, 0x97, 0x97, 0x97, 0x97, 0x9A, 0x9A, 0x98, 0x98, - 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x97, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, - 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x1F, 0x1F, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, - 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x99, 0x97, 0x97, 0x97, 0x97, - 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, - 0x98, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x98, 0x98, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, - 0x98, 0x98, 0x98, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x08, 0x1E, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x1C, 0x12, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x00, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, - 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x9A, 0x9A, - 0x9A, 0x9A, 0x97, 0x97, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x97, - 0x97, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x98, 0x98, - 0x97, 0x97, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x98, - 0x9B, 0x9B, 0x9A, 0x9A, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x1F, - 0x1F, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, - 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, - 0x97, 0x98, 0x08, 0x1E, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x00, - 0x1D, 0x18, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x00, 0x13, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x99, - 0x99, 0x99, 0x98, 0x98, 0x96, 0x98, 0x98, 0x96, 0x96, 0x99, 0x99, 0x9A, 0x9A, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x97, 0x97, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, - 0x99, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x1F, 0x1F, 0x9B, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x9A, 0x98, 0x98, 0x98, 0x99, 0x99, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, 0x98, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, - 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x9B, 0x98, 0x98, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, - 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x1A, 0x9D, 0x33, 0x34, 0x1E, 0x1C, - 0x19, 0x17, 0x17, 0x16, 0x13, 0x07, 0x16, 0x17, 0x19, 0x1C, 0x1D, 0x1E, 0x9D, 0x1D, 0x08, 0x1B, - 0x1B, 0x04, 0x14, 0x07, 0x07, 0x1A, 0x11, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x99, 0x9A, 0x9A, 0x99, - 0x99, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x97, 0x97, 0x99, - 0x99, 0x97, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9D, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x1F, - 0x1F, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, - 0x9A, 0x9A, 0x9A, 0x98, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, - 0x96, 0x98, 0x97, 0x97, 0x97, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x98, 0x98, 0x9B, 0x9B, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x9B, - 0x99, 0x99, 0x1A, 0x9D, 0x33, 0x34, 0x35, 0x1E, 0x07, 0x12, 0x11, 0x0F, 0x0F, 0x0F, 0x11, 0x12, - 0x13, 0x16, 0x18, 0x1A, 0x1B, 0x04, 0x04, 0x04, 0x0C, 0x04, 0x14, 0x07, 0x07, 0x1A, 0x11, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, - 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x99, - 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9D, 0x9A, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x99, 0x98, - 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x1F, 0x1F, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, - 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9A, 0x9A, 0x98, 0x9B, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x98, 0x9A, - 0x9F, 0x1F, 0x1F, 0x9F, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x98, 0x98, 0x19, 0x00, 0x33, 0x34, 0x35, 0x36, - 0x1E, 0x07, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x0C, - 0x04, 0x14, 0x14, 0x07, 0x07, 0x16, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, - 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, - 0x97, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x99, 0x9D, 0x98, 0x98, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x1F, - 0x1F, 0x9B, 0x9D, 0x97, 0x97, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x96, 0x97, 0x97, 0x97, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, - 0x99, 0x98, 0x18, 0x00, 0x33, 0x34, 0x35, 0x36, 0x22, 0x1E, 0x16, 0x18, 0x19, 0x1B, 0x1D, 0x1E, - 0x9D, 0x9D, 0x04, 0x04, 0x0C, 0x0C, 0x0C, 0x0C, 0x04, 0x14, 0x14, 0x07, 0x07, 0x11, 0x12, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x9A, 0x9A, 0x9A, - 0x9A, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9B, 0x9D, 0x97, 0x97, 0x97, 0x9B, 0x99, - 0x9A, 0x98, 0x98, 0x97, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, - 0x99, 0x9A, 0x9A, 0x98, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9F, - 0x1F, 0x9F, 0x98, 0x98, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, - 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x98, 0x98, 0x99, 0x18, 0x9D, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x1E, 0x1D, 0x1C, 0x08, 0x08, 0x1C, 0x1D, 0x1E, 0x9D, 0x9D, 0x00, 0x08, 0x04, 0x04, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, - 0x9A, 0x98, 0x98, 0x97, 0x97, 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, - 0x97, 0x99, 0x99, 0x99, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9B, 0x97, 0x97, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x99, 0x98, 0x98, 0x9A, 0x9A, 0x98, 0x99, 0x99, 0x99, 0x99, 0x98, 0x97, 0x97, 0x97, 0x96, 0x96, - 0x96, 0x96, 0x96, 0x96, 0x98, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x9D, 0x9A, 0x9D, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x9B, - 0x99, 0x99, 0x17, 0x1E, 0x33, 0x34, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x00, 0x16, 0x13, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x08, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x9A, 0x98, 0x98, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, - 0x99, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, - 0x9F, 0x9B, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x97, 0x97, 0x99, - 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, - 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x98, 0x1F, 0x1F, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, - 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x99, 0x98, 0x98, 0x98, 0x97, 0x97, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x9A, 0x9F, 0x1F, - 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x99, 0x98, 0x98, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x07, 0x1D, 0x33, 0x34, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x19, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, - 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, - 0x98, 0x9B, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x97, 0x97, 0x97, - 0x97, 0x99, 0x99, 0x99, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, - 0x96, 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x96, 0x97, 0x97, 0x9A, 0x9A, 0x97, 0x97, 0x97, 0x97, - 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x99, 0x9A, 0x9A, 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9B, 0x98, 0x9B, - 0x99, 0x99, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x97, - 0x96, 0x96, 0x96, 0x98, 0x9A, 0x9F, 0x1F, 0x1F, 0x9F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x98, 0x07, 0x08, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x0F, 0x07, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x98, 0x98, 0x99, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x9A, 0x9F, - 0x1F, 0x9F, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, 0x97, 0x97, - 0x99, 0x99, 0x9A, 0x9A, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x9A, 0x9A, 0x96, 0x96, 0x96, 0x96, - 0x96, 0x98, 0x98, 0x95, 0x95, 0x97, 0x98, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x99, - 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x98, 0x98, - 0x98, 0x98, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x1F, 0x1F, 0x9F, - 0x98, 0x98, 0x99, 0x99, 0x99, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x07, 0x08, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x27, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x12, 0x0F, 0x19, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, - 0x9A, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x99, 0x99, - 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, - 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, - 0x96, 0x96, 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x95, 0x97, 0x95, 0x97, 0x98, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9B, 0x99, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9A, 0x9F, 0x1F, 0x9F, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x07, 0x08, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x0F, 0x12, 0x08, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, - 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x9B, 0x9B, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x9A, - 0x9F, 0x1F, 0x9F, 0x9A, 0x99, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, - 0x99, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x9B, 0x98, 0x98, 0x98, 0x99, 0x99, 0x96, 0x96, 0x96, - 0x96, 0x96, 0x95, 0x95, 0x95, 0x95, 0x99, 0x1F, 0x1F, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, - 0x9D, 0x9D, 0x9D, 0x97, 0x97, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, - 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9A, 0x1F, 0x1F, 0x9F, 0x99, - 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9A, - 0x9A, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x07, 0x1A, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x1C, 0x12, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x98, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x99, - 0x99, 0x98, 0x98, 0x98, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x9A, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x96, 0x97, 0x97, 0x98, 0x98, 0x96, 0x96, 0x95, 0x95, 0x95, 0x99, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x99, - 0x99, 0x9D, 0x98, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, - 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, - 0x97, 0x98, 0x97, 0x97, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x08, 0x18, 0x1B, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x1D, 0x18, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x10, 0x31, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x96, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x99, 0x99, 0x98, 0x98, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, - 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x97, - 0x97, 0x97, 0x97, 0x98, 0x98, 0x9A, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x98, - 0x97, 0x97, 0x97, 0x97, 0x95, 0x95, 0x99, 0x1F, 0x1F, 0x9D, 0x9A, 0x9D, 0x9D, 0x9D, 0x9A, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9D, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x9A, 0x1F, 0x1F, 0x9F, 0x99, 0x99, - 0x9B, 0x9B, 0x9B, 0x9B, 0x95, 0x96, 0x96, 0x96, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x9A, - 0x9A, 0x9A, 0x9A, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x08, - 0x1A, 0x17, 0x18, 0x19, 0x1A, 0x1A, 0x1B, 0x08, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x00, 0x1E, 0x1C, - 0x18, 0x16, 0x33, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9A, 0x9A, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x9A, - 0x9A, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, - 0x99, 0x9A, 0x9F, 0x1F, 0x9F, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x99, - 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x9A, 0x9A, 0x98, 0x98, 0x96, 0x96, 0x96, - 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x08, 0x07, 0x11, 0x0F, 0x0F, 0x11, 0x12, 0x13, - 0x07, 0x07, 0x07, 0x32, 0x32, 0x33, 0x33, 0x34, 0x0C, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x96, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x97, 0x97, 0x99, 0x96, 0x96, 0x96, 0x96, - 0x96, 0x99, 0x99, 0x99, 0x98, 0x98, 0x99, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x1F, 0x1F, 0x9F, 0x98, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x98, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x98, - 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x1D, 0x08, 0x1C, 0x1C, - 0x1D, 0x1E, 0x9D, 0x00, 0x00, 0x00, 0x9D, 0x1E, 0x1D, 0x1C, 0x1C, 0x1B, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1C, 0x24, 0x25, 0x04, 0x04, 0x25, 0x23, 0x20, 0x36, 0x35, 0x0C, - 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x96, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x97, - 0x97, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, - 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x99, 0x1F, - 0x1F, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x9A, 0x9F, 0x1F, 0x9F, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x98, - 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, - 0x98, 0x99, 0x98, 0x1D, 0x1A, 0x1C, 0x1C, 0x1D, 0x1E, 0x1E, 0x9D, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9D, 0x9D, 0x1E, 0x1E, 0x1D, 0x1C, - 0x08, 0x1A, 0x19, 0x18, 0x17, 0x17, 0x07, 0x11, 0x07, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x96, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x9A, 0x9A, - 0x97, 0x97, 0x97, 0x97, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x97, - 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9B, - 0x9B, 0x9B, 0x97, 0x98, 0x98, 0x99, 0x9B, 0x9B, 0x9A, 0x99, 0x97, 0x97, 0x97, 0x97, 0x9A, 0x9A, - 0x9A, 0x97, 0x97, 0x97, 0x98, 0x98, 0x9A, 0x1F, 0x1F, 0x99, 0x98, 0x98, 0x97, 0x99, 0x99, 0x9B, - 0x9B, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x99, 0x97, 0x97, - 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9A, - 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, - 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x98, 0x18, 0x08, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x00, 0x15, 0x13, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x12, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x98, - 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, - 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x97, 0x97, 0x99, 0x99, 0x9A, 0x9A, - 0x9A, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, - 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x9B, 0x9B, - 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x9A, 0x1F, - 0x1F, 0x9B, 0x9B, 0x9B, 0x97, 0x97, 0x97, 0x9B, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, - 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x97, 0x9A, - 0x9F, 0x1F, 0x9F, 0x9B, 0x98, 0x98, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, - 0x98, 0x98, 0x98, 0x18, 0x08, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x19, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x17, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x98, 0x9D, 0x98, 0x9B, 0x9D, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x96, 0x98, 0x98, 0x96, - 0x96, 0x99, 0x99, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, - 0x97, 0x97, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, - 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x98, - 0x9A, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x9A, 0x1F, 0x1F, 0x9D, 0x98, 0x98, 0x97, 0x97, 0x97, 0x9A, - 0x98, 0x98, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x97, 0x97, 0x97, 0x97, 0x97, - 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x98, 0x99, 0x99, 0x99, - 0x9B, 0x9B, 0x99, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x98, 0x9B, 0x9B, 0x9B, 0x9A, 0x98, 0x98, 0x97, - 0x97, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x1E, 0x17, 0x1A, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x1A, 0x13, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x96, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9D, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x99, - 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x97, 0x97, 0x99, 0x99, 0x97, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x9A, 0x1F, - 0x1F, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x99, 0x98, 0x98, 0x98, 0x97, 0x97, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x9A, 0x9F, - 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x99, 0x99, 0x99, - 0x99, 0x9A, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, - 0x98, 0x98, 0x1C, 0x17, 0x18, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x11, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9A, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, - 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, - 0x99, 0x99, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, - 0x96, 0x97, 0x97, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9D, 0x9B, 0x99, 0x99, 0x98, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x9B, 0x1F, 0x1F, 0x9A, 0x9A, 0x9A, 0x9D, 0x9D, 0x99, 0x9B, - 0x9B, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x97, - 0x97, 0x97, 0x97, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9D, 0x9A, - 0x9A, 0x98, 0x98, 0x97, 0x97, 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x1A, 0x17, 0x18, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x1D, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x1A, 0x11, 0x16, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x98, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, - 0x9A, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x99, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x9B, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, - 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x9A, 0x1F, 0x1F, - 0x9F, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, - 0x98, 0x1D, 0x1A, 0x1A, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x00, 0x1B, 0x12, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x16, 0x0F, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x98, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9A, 0x9A, 0x9D, 0x9D, 0x9A, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, - 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9D, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9B, 0x9F, - 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x9B, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9A, 0x9D, 0x9D, 0x9D, - 0x9B, 0x9D, 0x9B, 0x9D, 0x9D, 0x9A, 0x9D, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x99, 0x9A, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9A, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, - 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, - 0x1E, 0x1C, 0x1C, 0x1E, 0x98, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1A, 0x1A, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, 0x1D, 0x17, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x1A, 0x1A, 0x0F, 0x16, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x96, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x99, 0x9D, 0x98, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x9A, 0x9F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9F, 0x1F, 0x9F, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, - 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x1B, 0x07, 0x11, 0x11, 0x14, 0x19, 0x98, 0x98, 0x1D, - 0x1D, 0x1E, 0x1A, 0x18, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x08, 0x07, 0x07, 0x17, 0x17, 0x18, - 0x19, 0x1A, 0x1B, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1C, 0x1C, 0x1D, 0x1D, 0x1E, - 0x9D, 0x9D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x19, 0x1A, 0x16, 0x0F, 0x16, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1D, 0x1D, 0x9D, - 0x9D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, - 0x95, 0x95, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x95, 0x95, 0x98, 0x98, 0x96, 0x96, 0x96, - 0x96, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x97, 0x97, 0x97, 0x97, - 0x97, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, 0x96, - 0x95, 0x95, 0x95, 0x9A, 0x9F, 0x1F, 0x9F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x07, - 0x18, 0x08, 0x32, 0x17, 0x08, 0x18, 0x1D, 0x1D, 0x1D, 0x1C, 0x18, 0x18, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x08, 0x07, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x19, - 0x18, 0x17, 0x16, 0x07, 0x07, 0x13, 0x13, 0x11, 0x11, 0x0F, 0x0F, 0x0F, 0x0F, 0x14, 0x00, 0x19, - 0x1A, 0x1A, 0x1A, 0x16, 0x0F, 0x18, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x96, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x98, 0x98, - 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, - 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, - 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x9D, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x99, - 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x97, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x08, 0x1C, 0x34, 0x32, 0x32, 0x08, 0x19, 0x1D, - 0x1D, 0x1A, 0x19, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x07, 0x0F, 0x14, 0x18, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x2D, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x95, 0x95, - 0x95, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x97, 0x97, 0x97, 0x97, 0x98, - 0x98, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x9A, 0x9A, 0x97, 0x97, 0x97, 0x97, 0x9A, 0x9A, - 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x99, 0x9D, 0x1F, 0x1F, - 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x9B, 0x9F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, - 0x99, 0x08, 0x08, 0x32, 0x30, 0x32, 0x08, 0x08, 0x1D, 0x1A, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x07, 0x0F, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x28, 0x19, 0x19, - 0x1A, 0x1A, 0x18, 0x0F, 0x0F, 0x07, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x95, 0x95, 0x95, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, - 0x9A, 0x9A, 0x9A, 0x9A, 0x97, 0x97, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x98, - 0x98, 0x97, 0x97, 0x97, 0x97, 0x99, 0x9D, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x98, 0x98, - 0x97, 0x97, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x99, - 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x08, 0x32, 0x30, 0x30, 0x32, 0x08, - 0x08, 0x1A, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x19, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x25, 0x25, 0x19, 0x19, 0x19, 0x1A, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x95, 0x95, 0x95, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9A, 0x9A, 0x98, 0x98, 0x96, 0x96, 0x98, 0x98, 0x96, 0x96, 0x99, 0x99, 0x9A, 0x9A, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x99, 0x9D, 0x1F, - 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, - 0x99, 0x9B, 0x9F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x9A, 0x9A, - 0x99, 0x99, 0x98, 0x98, 0x99, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, - 0x98, 0x98, 0x25, 0x32, 0x30, 0x30, 0x30, 0x34, 0x08, 0x1D, 0x07, 0x19, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x1C, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x19, - 0x19, 0x17, 0x07, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, 0x22, 0x07, 0x19, - 0x1A, 0x1A, 0x15, 0x11, 0x1C, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9A, - 0x9A, 0x99, 0x99, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9A, 0x97, - 0x97, 0x99, 0x99, 0x97, 0x97, 0x9B, 0x99, 0x1F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x9A, 0x9F, 0x1F, 0x9F, 0x9B, 0x9D, 0x9D, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x98, 0x98, 0x1D, 0x25, 0x32, 0x30, 0x30, 0x30, 0x32, - 0x00, 0x08, 0x1D, 0x07, 0x19, 0x19, 0x35, 0x36, 0x22, 0x24, 0x1C, 0x19, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x0C, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, 0x37, 0x07, 0x18, 0x19, 0x1A, 0x07, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x96, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, - 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x9A, 0x9A, - 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x99, 0x9B, - 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, - 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9A, - 0x9B, 0x9F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x99, 0x99, 0x99, 0x99, 0x9B, - 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x98, 0x98, - 0x1D, 0x1D, 0x25, 0x30, 0x30, 0x30, 0x30, 0x32, 0x00, 0x08, 0x1D, 0x1D, 0x07, 0x18, 0x08, 0x36, - 0x22, 0x24, 0x1E, 0x1A, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, - 0x13, 0x14, 0x14, 0x07, 0x08, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, 0x35, 0x07, - 0x18, 0x1A, 0x18, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9D, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, - 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x9B, 0x9B, 0x97, 0x97, 0x99, 0x99, 0x97, - 0x97, 0x99, 0x99, 0x99, 0x99, 0x97, 0x9B, 0x99, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, - 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x9B, 0x9F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, - 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x27, 0x34, 0x30, 0x30, 0x30, 0x30, 0x32, - 0x00, 0x08, 0x1D, 0x1D, 0x1D, 0x19, 0x07, 0x19, 0x08, 0x24, 0x04, 0x1E, 0x1C, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x14, 0x14, 0x07, 0x07, 0x0C, 0x04, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, 0x0C, 0x33, 0x07, 0x18, 0x18, 0x1A, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x97, 0x97, 0x99, - 0x9B, 0x1F, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x1F, 0x1F, 0x1F, 0x1F, 0x9D, 0x9D, - 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x1F, - 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x1D, 0x1D, 0x1D, - 0x2A, 0x27, 0x32, 0x30, 0x30, 0x30, 0x30, 0x34, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x16, - 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0x18, 0x14, 0x07, 0x07, 0x04, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, - 0x28, 0x32, 0x30, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1C, - 0x1E, 0x1E, 0x9D, 0x9D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x2C, 0x2C, 0x34, 0x30, 0x30, 0x30, 0x30, 0x32, 0x00, - 0x07, 0x07, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x14, 0x07, 0x07, 0x04, 0x0C, 0x04, - 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x00, 0x15, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x95, 0x95, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x99, - 0x99, 0x98, 0x97, 0x97, 0x99, 0x99, 0x98, 0x98, 0x97, 0x97, 0x99, 0x98, 0x98, 0x98, 0x98, 0x97, - 0x97, 0x99, 0x99, 0x9A, 0x97, 0x97, 0x1F, 0x1F, 0x1F, 0x1F, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9A, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x1F, 0x1F, 0x1F, 0x1F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9A, 0x9A, 0x97, 0x9A, 0x9A, 0x98, 0x98, 0x97, 0x97, 0x9B, 0x9B, 0x98, 0x1F, 0x1F, - 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, - 0x12, 0x0F, 0x30, 0x30, 0x30, 0x32, 0x34, 0x00, 0x1E, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x16, 0x12, - 0x0F, 0x12, 0x07, 0x16, 0x17, 0x18, 0x19, 0x08, 0x1C, 0x1E, 0x9D, 0x00, 0x00, 0x1E, 0x1D, 0x1C, - 0x1B, 0x08, 0x14, 0x07, 0x07, 0x04, 0x04, 0x04, 0x04, 0x1B, 0x1B, 0x08, 0x19, 0x19, 0x18, 0x17, - 0x16, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x95, 0x95, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, - 0x9A, 0x9A, 0x98, 0x98, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x98, 0x98, 0x9A, 0x9A, 0x99, 0x99, 0x1F, - 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, - 0x98, 0x9D, 0x99, 0x99, 0x9B, 0x9B, 0x98, 0x98, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x98, 0x1F, - 0x1F, 0x1F, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x9A, 0x97, 0x97, 0x99, 0x99, 0x1F, 0x1F, 0x1F, 0x1F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, - 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x33, 0x13, 0x0F, 0x30, 0x30, 0x30, 0x30, 0x30, - 0x31, 0x32, 0x32, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x9D, 0x00, 0x00, 0x17, 0x12, 0x12, 0x12, 0x13, 0x13, 0x07, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9F, 0x1F, 0x1F, 0x1F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x1F, 0x1F, 0x1F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9B, - 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x97, 0x97, 0x9B, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9D, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x33, 0x33, 0x0F, 0x30, 0x30, 0x30, 0x31, 0x31, 0x31, 0x32, 0x33, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x19, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x1A, 0x07, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x96, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x9F, 0x1F, 0x1F, - 0x9F, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x9D, 0x1F, 0x1F, 0x9F, 0x99, 0x99, 0x98, 0x98, - 0x98, 0x98, 0x99, 0x98, 0x98, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x99, 0x99, 0x1F, 0x1F, 0x97, 0x99, 0x99, 0x97, 0x97, 0x98, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x34, 0x15, 0x30, 0x30, 0x30, 0x30, - 0x31, 0x32, 0x32, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x07, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x95, 0x95, 0x9B, 0x9B, - 0x9B, 0x98, 0x98, 0x97, 0x97, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x97, 0x97, 0x97, 0x97, 0x97, - 0x97, 0x97, 0x99, 0x99, 0x99, 0x97, 0x97, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x97, 0x96, - 0x96, 0x96, 0x96, 0x97, 0x99, 0x9F, 0x1F, 0x1F, 0x9F, 0x9B, 0x9B, 0x97, 0x97, 0x97, 0x99, 0x99, - 0x99, 0x97, 0x97, 0x98, 0x98, 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, - 0x9B, 0x1F, 0x1F, 0x9D, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x97, - 0x97, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x97, 0x97, 0x97, 0x97, 0x97, 0x99, 0x1F, 0x1F, - 0x9B, 0x9B, 0x98, 0x97, 0x97, 0x98, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x35, 0x14, 0x30, 0x30, 0x31, 0x31, 0x31, 0x32, 0x33, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x1A, 0x17, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x95, 0x95, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x97, 0x97, 0x9B, 0x9B, 0x9B, - 0x99, 0x99, 0x97, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x99, - 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x97, 0x96, 0x96, 0x97, 0x97, 0x97, 0x99, 0x99, 0x9F, 0x1F, - 0x9F, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x9B, 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x99, - 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x97, 0x97, 0x98, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x98, 0x98, 0x99, 0x99, 0x99, 0x1F, 0x1F, 0x9B, 0x9B, 0x99, 0x97, 0x97, 0x9C, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x14, 0x30, 0x30, - 0x31, 0x32, 0x32, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, - 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x18, 0x07, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9A, 0x97, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x99, 0x9F, 0x1F, 0x9F, 0x1F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, - 0x9B, 0x1F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, - 0x99, 0x97, 0x97, 0x97, 0x97, 0x99, 0x99, 0x99, 0x99, 0x97, 0x97, 0x99, 0x99, 0x1F, 0x9D, 0x9D, - 0x9B, 0x97, 0x97, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x22, 0x18, 0x30, 0x31, 0x31, 0x31, 0x32, 0x33, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, 0x00, 0x1B, 0x13, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, - 0x1A, 0x1A, 0x17, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9A, - 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9B, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x9F, 0x1F, - 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x98, 0x98, 0x97, 0x99, 0x99, 0x98, 0x9B, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, - 0x9B, 0x98, 0x98, 0x98, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x98, - 0x98, 0x9B, 0x99, 0x99, 0x1F, 0x9B, 0x9B, 0x99, 0x97, 0x97, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x04, 0x08, 0x30, 0x30, - 0x31, 0x32, 0x32, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, - 0x1C, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x16, 0x17, 0x17, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x1A, 0x18, 0x07, 0x1B, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x96, 0x96, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x98, 0x98, - 0x98, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x9F, 0x1F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x99, 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x9B, - 0x1F, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x98, 0x99, 0x99, 0x1F, 0x99, 0x99, 0x9B, 0x97, - 0x97, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x04, 0x08, 0x08, 0x1A, 0x19, 0x18, 0x17, 0x16, 0x17, 0x18, 0x19, - 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x9D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9D, 0x1E, 0x1D, 0x1C, 0x08, - 0x08, 0x1A, 0x14, 0x07, 0x07, 0x08, 0x08, 0x08, 0x1A, 0x18, 0x18, 0x17, 0x07, 0x0F, 0x07, 0x19, - 0x1A, 0x1A, 0x1A, 0x17, 0x07, 0x1B, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, - 0x9D, 0x9B, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x99, 0x99, 0x9F, - 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x99, 0x99, 0x97, 0x98, 0x98, 0x9B, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x9B, 0x9B, 0x99, - 0x99, 0x99, 0x1F, 0x9B, 0x9B, 0x99, 0x97, 0x97, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x19, 0x17, - 0x07, 0x13, 0x13, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, - 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x07, 0x1C, 0x14, 0x07, 0x07, 0x08, 0x0C, 0x07, - 0x14, 0x13, 0x12, 0x11, 0x0F, 0x04, 0x1C, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x07, 0x07, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x96, 0x9B, 0x9D, 0x9D, 0x1F, 0x9D, 0x9D, 0x9D, 0x1F, 0x1F, 0x9D, 0x1F, 0x1F, - 0x9D, 0x9D, 0x9D, 0x1F, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x99, 0x9B, 0x9B, 0x9F, - 0x9F, 0x1F, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9D, 0x1F, 0x1F, 0x9D, 0x9B, 0x9B, 0x97, 0x98, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x14, 0x07, 0x07, 0x08, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x04, 0x24, 0x19, 0x19, - 0x1A, 0x1A, 0x1A, 0x19, 0x12, 0x0F, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1C, 0x1E, 0x9D, 0x9D, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x9B, 0x9A, - 0x99, 0x99, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x9D, - 0x1F, 0x1F, 0x9B, 0x97, 0x97, 0x97, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x14, 0x07, 0x07, 0x08, 0x0C, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x04, 0x36, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x12, 0x0F, 0x07, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x95, 0x95, 0x97, 0x99, 0x99, 0x97, 0x99, 0x99, 0x99, 0x98, 0x97, 0x97, - 0x9A, 0x99, 0x99, 0x98, 0x97, 0x97, 0x97, 0x98, 0x99, 0x99, 0x98, 0x9F, 0x1F, 0x1F, 0x9B, 0x9B, - 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x96, - 0x96, 0x99, 0x99, 0x96, 0x96, 0x96, 0x96, 0x99, 0x99, 0x99, 0x96, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x1F, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x1F, 0x1F, 0x1F, 0x9B, 0x9B, 0x9B, 0x97, 0x99, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x18, 0x07, 0x07, 0x18, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, 0x0C, 0x19, 0x19, - 0x1A, 0x1A, 0x16, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x99, 0x99, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x97, 0x9F, 0x1F, 0x1F, 0x9B, 0x9B, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9A, 0x9A, - 0x99, 0x99, 0x9A, 0x9A, 0x99, 0x99, 0x98, 0x9B, 0x9B, 0x9D, 0x9B, 0x98, 0x98, 0x98, 0x99, 0x1F, - 0x1F, 0x1F, 0x9B, 0x9B, 0x9B, 0x97, 0x9B, 0x9B, 0x9B, 0x97, 0x9B, 0x9B, 0x9A, 0x97, 0x97, 0x99, - 0x98, 0x97, 0x97, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x08, 0x1A, 0x19, 0x18, 0x17, 0x16, 0x07, 0x13, 0x11, - 0x11, 0x13, 0x07, 0x17, 0x18, 0x19, 0x08, 0x08, 0x04, 0x04, 0x00, 0x18, 0x07, 0x07, 0x08, 0x07, - 0x1D, 0x1D, 0x1D, 0x1D, 0x2A, 0x0C, 0x0C, 0x19, 0x19, 0x1A, 0x12, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, - 0x9A, 0x9A, 0x9A, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x97, 0x1F, 0x1F, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9B, 0x9B, 0x1F, 0x98, 0x97, 0x97, 0x98, 0x98, 0x99, 0x99, 0x98, 0x97, - 0x9A, 0x99, 0x99, 0x97, 0x99, 0x99, 0x99, 0x97, 0x97, 0x98, 0x98, 0x97, 0x98, 0x99, 0x99, 0x97, - 0x97, 0x97, 0x97, 0x99, 0x97, 0x97, 0x9B, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x9A, 0x9A, - 0x9B, 0x9A, 0x9A, 0x9A, 0x9B, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x1D, 0x1D, - 0x00, 0x00, 0x1E, 0x1D, 0x1C, 0x08, 0x18, 0x07, 0x07, 0x17, 0x18, 0x08, 0x1D, 0x1D, 0x1B, 0x18, - 0x0C, 0x0C, 0x04, 0x00, 0x08, 0x08, 0x08, 0x07, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x0C, 0x19, - 0x1A, 0x1A, 0x12, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x1D, 0x1D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x98, 0x98, 0x98, 0x98, - 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x97, 0x97, 0x9B, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1C, 0x08, 0x1C, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x00, 0x15, 0x13, 0x12, 0x12, 0x13, 0x13, 0x16, 0x0C, 0x04, 0x08, 0x0F, 0x0F, 0x0F, - 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x34, 0x33, 0x19, 0x1A, 0x1A, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9B, 0x99, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x96, 0x96, 0x98, 0x97, 0x98, 0x97, 0x97, 0x98, 0x96, 0x96, 0x96, 0x96, 0x98, - 0x96, 0x96, 0x96, 0x96, 0x98, 0x1F, 0x1F, 0x9B, 0x9B, 0x9A, 0x9D, 0x9D, 0x9B, 0x9B, 0x9A, 0x9A, - 0x99, 0x9B, 0x9B, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9B, 0x9A, 0x97, 0x97, 0x9A, 0x99, 0x97, - 0x98, 0x98, 0x99, 0x99, 0x98, 0x1F, 0x1F, 0x99, 0x9B, 0x99, 0x99, 0x99, 0x9A, 0x9A, 0x9B, 0x99, - 0x99, 0x99, 0x9B, 0x98, 0x9B, 0x9B, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1E, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x18, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x16, 0x0C, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x29, 0x33, - 0x37, 0x22, 0x1A, 0x07, 0x07, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x96, 0x9D, 0x9D, 0x99, 0x98, 0x98, 0x98, 0x9B, 0x97, 0x9B, 0x9A, 0x9A, 0x96, - 0x95, 0x96, 0x96, 0x96, 0x96, 0x9A, 0x98, 0x99, 0x99, 0x99, 0x97, 0x97, 0x96, 0x9D, 0x9D, 0x1F, - 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x9A, 0x9B, 0x9B, - 0x99, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x9B, 0x9A, 0x99, 0x9B, 0x9B, 0x9A, 0x9B, 0x1F, 0x9B, 0x9D, - 0x9D, 0x9B, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x99, 0x98, 0x96, 0x96, 0x96, 0x99, 0x98, 0x98, 0x98, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x08, 0x00, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x19, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x29, 0x31, 0x30, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1D, 0x9D, 0x9D, 0x9D, - 0x9B, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x9B, 0x98, 0x98, 0x9A, 0x98, 0x96, 0x96, - 0x9A, 0x99, 0x96, 0x98, 0x96, 0x96, 0x9D, 0x1F, 0x1F, 0x1F, 0x9D, 0x9D, 0x1F, 0x9D, 0x1F, 0x9D, - 0x1F, 0x9D, 0x9D, 0x1F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x9B, 0x9B, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9A, 0x9A, 0x9B, 0x9B, 0x9A, 0x99, - 0x99, 0x99, 0x9B, 0x98, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x00, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x16, 0x1B, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x17, 0x0F, 0x0F, 0x19, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1C, 0x1E, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9D, 0x9B, - 0x9B, 0x9D, 0x9B, 0x9B, 0x99, 0x9B, 0x99, 0x9B, 0x9D, 0x9A, 0x98, 0x98, 0x97, 0x97, 0x1F, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x1F, 0x1F, 0x9D, 0x9D, 0x9B, 0x9A, 0x9B, 0x9B, 0x9A, - 0x9A, 0x9A, 0x98, 0x98, 0x97, 0x98, 0x99, 0x99, 0x99, 0x9B, 0x9D, 0x1F, 0x1F, 0x9E, 0x9D, 0x9D, - 0x9D, 0x9A, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x9B, 0x9B, 0x98, 0x98, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x18, 0x1E, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x19, 0x1A, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x1F, 0x9D, 0x9D, 0x9D, 0x99, 0x9D, 0x9B, 0x99, 0x9D, 0x1F, - 0x9D, 0x98, 0x98, 0x99, 0x98, 0x99, 0x98, 0x9A, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, - 0x97, 0x9E, 0x9E, 0x1F, 0x1F, 0x9D, 0x1F, 0x9D, 0x9B, 0x9B, 0x9D, 0x9B, 0x9D, 0x9D, 0x9B, 0x9A, - 0x9A, 0x9B, 0x9B, 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x1C, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x16, 0x1B, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x96, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x98, 0x98, - 0x9A, 0x9A, 0x9A, 0x98, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x98, 0x99, 0x97, 0x9D, 0x1F, 0x1F, 0x1F, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x1F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9A, 0x9B, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x1F, 0x9D, 0x9E, 0x1F, 0x1F, 0x9A, 0x9A, 0x99, 0x99, - 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1A, 0x07, 0x08, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x19, 0x1A, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, - 0x96, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x9A, 0x9A, 0x99, 0x98, 0x98, 0x98, 0x1F, 0x99, 0x98, 0x99, - 0x9A, 0x9A, 0x1F, 0x9B, 0x9A, 0x99, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, - 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x98, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9B, 0x9D, 0x9B, 0x9D, 0x9A, 0x9A, 0x98, 0x99, 0x9A, - 0x9A, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, 0x1B, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x16, 0x1B, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1E, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9B, 0x9B, 0x9D, 0x9D, 0x1F, 0x9D, 0x9D, 0x9D, 0x9A, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, - 0x9A, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x1F, 0x1F, 0x9F, 0x9F, 0x9D, 0x1F, 0x9D, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x07, 0x08, 0x33, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x08, 0x08, 0x04, 0x28, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x08, 0x18, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x9D, 0x9A, 0x9B, 0x9B, 0x99, 0x98, 0x97, 0x99, 0x99, 0x97, 0x99, 0x98, 0x97, - 0x97, 0x97, 0x96, 0x96, 0x96, 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9B, 0x99, 0x99, 0x99, 0x96, 0x99, - 0x99, 0x98, 0x99, 0x9B, 0x9A, 0x98, 0x98, 0x99, 0x99, 0x9B, 0x9A, 0x98, 0x98, 0x97, 0x96, 0x99, - 0x96, 0x99, 0x96, 0x9A, 0x98, 0x97, 0x98, 0x97, 0x97, 0x98, 0x96, 0x96, 0x95, 0x98, 0x97, 0x98, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x1C, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x07, 0x0F, 0x0F, 0x08, 0x28, 0x29, 0x00, 0x00, 0x0F, 0x07, 0x07, 0x08, 0x00, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x18, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x9D, 0x9D, 0x9D, 0x9B, - 0x9D, 0x9B, 0x9D, 0x9D, 0x9A, 0x98, 0x99, 0x9D, 0x9A, 0x98, 0x96, 0x98, 0x96, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x98, 0x98, - 0x98, 0x97, 0x97, 0x96, 0x97, 0x98, 0x98, 0x9A, 0x1F, 0x9B, 0x9A, 0x99, 0x99, 0x98, 0x99, 0x1F, - 0x99, 0x99, 0x99, 0x9A, 0x98, 0x97, 0x97, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x18, 0x1D, 0x33, 0x33, 0x0C, 0x35, 0x36, 0x0F, 0x0F, 0x18, 0x11, 0x19, 0x2A, 0x2A, 0x00, - 0x00, 0x07, 0x08, 0x00, 0x13, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x17, 0x13, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xF2, 0xF2, 0xEF, 0xF2, - 0x7C, 0x7C, 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x7F, 0x7F, 0xFA, 0xFB, 0xFB, 0xFD, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x1E, 0x32, 0x33, 0x0C, 0x35, 0x07, - 0x0F, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, 0x2A, 0x2D, 0x00, 0x00, 0x00, 0x16, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1B, 0xFD, 0xF4, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, - 0xF3, 0xF3, 0xF3, 0xF3, 0xF4, 0xF4, 0xF4, 0xF5, 0xF7, 0xF7, 0xF5, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, - 0xF6, 0xF7, 0xF6, 0xF7, 0xF7, 0xF7, 0xF7, 0xF8, 0xF8, 0xF8, 0xF9, 0xF9, 0xFC, 0xFC, 0xF9, 0xFC, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1C, 0x00, 0x33, 0x33, 0x0C, 0x35, 0x18, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, 0x00, - 0x00, 0x00, 0x1B, 0x13, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xF7, 0xF8, 0xF4, 0xF2, - 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF3, 0xF3, 0xF3, 0xF3, 0xF4, - 0xF7, 0xFA, 0xF7, 0xF5, 0xF5, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF6, 0xF7, 0xF7, 0xF7, - 0xF7, 0xF8, 0xF8, 0xF9, 0xFC, 0xFD, 0xFD, 0xFC, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1C, 0x00, 0x32, 0x33, 0x0C, 0x35, 0x1C, - 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, 0x00, 0x00, 0x18, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x1A, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1B, 0xFD, 0xF6, 0x7D, 0xF0, 0xF4, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF2, - 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0xF2, 0x79, 0xF2, 0xF3, 0xF4, 0xEF, 0xF3, 0xF4, 0xF4, 0xF4, 0xF5, - 0xF5, 0xF5, 0xF6, 0xF6, 0xF6, 0xF6, 0xF7, 0xF6, 0xF7, 0xF6, 0xF7, 0xF7, 0xFA, 0xFD, 0xF4, 0xFB, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1D, 0x08, 0x33, 0x33, 0x0C, 0x35, 0x00, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, - 0x19, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xF4, 0xF4, 0xF4, 0xF4, - 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF4, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF2, 0xF2, 0xF2, - 0xF2, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF3, 0xF4, 0xF4, 0xF5, 0xF5, 0xF5, 0xF6, 0xF6, 0xF6, 0xF6, - 0xF6, 0xF6, 0xF7, 0xF6, 0xF7, 0xF7, 0xF9, 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, 0x18, 0x08, 0x08, 0x0C, 0x35, 0x36, - 0x00, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x11, 0x08, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0xEB, 0xEB, 0x1A, - 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1B, 0xFB, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, - 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, - 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF9, 0xF9, 0xF9, 0xF9, 0xFA, 0xFA, 0xFA, 0xFB, 0xFB, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1E, 0x1B, 0x07, 0x07, 0x08, 0x08, 0x36, 0x22, 0x00, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x11, 0x08, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0xEB, 0xEB, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x9B, 0x99, 0x98, 0x98, - 0x98, 0x96, 0x97, 0x98, 0x98, 0x96, 0x96, 0x98, 0x96, 0x96, 0x98, 0x00, 0x9B, 0x9D, 0x9D, 0x9A, - 0x9A, 0x9B, 0x99, 0x9B, 0x99, 0x9A, 0x9A, 0x97, 0x99, 0x97, 0x99, 0x99, 0x9F, 0x99, 0x9B, 0x99, - 0x9A, 0x9B, 0x99, 0x9B, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x07, 0x07, 0x18, - 0x18, 0x16, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x11, 0x12, 0x12, 0x0F, - 0x07, 0x04, 0x37, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0x1B, 0xEB, - 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1E, 0x9B, 0x9B, 0x9B, 0x9D, 0x9D, 0x9D, 0x99, 0x9B, 0x9D, 0x9D, - 0x9B, 0x9A, 0x97, 0x00, 0x9A, 0x99, 0x9B, 0x9D, 0x00, 0x9B, 0x9B, 0x9A, 0x9A, 0x9B, 0x9A, 0x97, - 0x97, 0x99, 0x99, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9B, 0x9A, 0x9B, 0x9B, 0x98, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x08, 0x08, 0x04, 0x04, 0x08, 0x04, 0x37, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0x1A, 0xEB, 0x1B, 0x1B, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x9D, 0x9D, - 0x9D, 0x9A, 0x97, 0x9A, 0x98, 0x9F, 0x9D, 0x9D, 0x9A, 0x9B, 0x9D, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9F, 0x9D, 0x9D, 0x9B, 0x9D, 0x9D, 0x9D, 0x9D, 0x9F, 0x9D, 0x9F, 0x9F, 0x9D, 0x9B, 0x9A, 0x9A, - 0x98, 0x98, 0x99, 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x08, 0x08, - 0x08, 0x08, 0x1A, 0x19, 0x17, 0x07, 0x12, 0x0F, 0x0F, 0x12, 0x07, 0x0C, 0x0C, 0x0C, 0x04, 0x04, - 0x08, 0x14, 0x14, 0x04, 0x35, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0xEB, 0xEA, 0xEA, 0x1B, - 0xEB, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x9D, 0x99, 0x99, 0x9B, 0x9B, 0x9A, 0x97, 0x98, 0x96, - 0x98, 0x96, 0x9F, 0x9D, 0x9D, 0x9D, 0x9B, 0x9D, 0x99, 0x9B, 0x9D, 0x9A, 0x9A, 0x9B, 0x9D, 0x9B, - 0x9A, 0x99, 0x99, 0x9A, 0x9A, 0x9A, 0x98, 0x98, 0x98, 0x98, 0x95, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1C, 0x00, 0x0C, 0x00, 0x1C, 0x19, 0x17, 0x07, 0x17, 0x19, 0x08, 0x1C, 0x1D, - 0x1D, 0x1D, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x13, 0x14, 0x14, 0x07, 0x04, 0x0C, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0xEA, 0x1B, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, - 0x9D, 0x9D, 0x9B, 0x99, 0x99, 0x9B, 0x9B, 0x98, 0x9B, 0x9B, 0x97, 0x97, 0x9F, 0x9D, 0x9D, 0x9D, - 0x9B, 0x9B, 0x9D, 0x9B, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x99, 0x9F, 0x9B, 0x9B, 0x99, 0x9B, 0x9B, - 0x9B, 0x9B, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x9D, 0x00, 0x00, 0x17, 0x13, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x0C, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0xEA, 0xEA, - 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x9B, 0x9D, 0x99, 0x9B, 0x9B, 0x99, 0x97, - 0x97, 0x99, 0x99, 0x98, 0x98, 0x99, 0x9F, 0x9D, 0x9B, 0x9B, 0x99, 0x97, 0x98, 0x99, 0x9E, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9A, 0x98, 0x99, 0x9B, 0x99, 0x9D, 0x97, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x00, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x18, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x0C, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0x1C, 0xEA, 0x1B, 0x1B, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x96, 0x99, 0x99, 0x98, 0x9B, 0x9A, 0x98, 0x98, 0x9C, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, - 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9F, 0x99, 0x99, 0x9C, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, - 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0x1C, 0xEA, - 0xEA, 0x1B, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x96, 0x99, 0x99, 0x98, 0x9B, 0x9A, 0x98, - 0x98, 0x9F, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x9C, 0x99, - 0x99, 0x9F, 0x97, 0x97, 0x97, 0x98, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x9D, 0x1D, 0x1B, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x1A, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0x1C, 0x1C, 0xEC, 0x1C, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x96, 0x9B, 0x9D, 0x9A, 0x9B, 0x99, 0x9B, 0x9A, 0x97, 0x9B, 0x97, 0x9F, 0x9B, 0x9D, - 0x9D, 0x9D, 0x9D, 0x9B, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9D, 0x9B, 0x9B, 0x9A, 0x99, 0x9B, 0x9B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0x1C, 0xEC, 0xEC, - 0xEC, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xDA, 0xDA, 0xDA, 0xD9, 0xD7, 0xD7, - 0x9E, 0xD7, 0xD7, 0x9B, 0x00, 0x9F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9F, 0x9F, - 0x1F, 0x9F, 0x9F, 0x9E, 0x9D, 0x9F, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x07, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x0F, 0x07, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0x1C, 0xEC, 0x1D, 0xEC, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD3, 0xD4, 0xD4, 0xDB, 0xD8, 0xD8, - 0xD8, 0xD8, 0xD9, 0xD9, 0xDA, 0xDA, 0xD9, 0xD7, 0xD9, 0xD7, 0xD7, 0xDC, 0x9F, 0x00, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x9F, 0x9F, 0x9D, 0x9D, 0x9E, 0x9D, 0x9D, 0x9F, 0x9D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x12, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0x1C, 0xEC, 0x1D, - 0x1D, 0xEA, 0x1B, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0xD3, 0xD2, 0xD2, 0xD2, 0xD4, 0xDB, 0xD7, 0xD7, 0xD7, 0xD7, 0xD9, 0xDA, 0xDA, 0xDA, 0xD9, - 0xD9, 0xD9, 0xDA, 0xDA, 0xD8, 0xDC, 0x1F, 0x1F, 0x1F, 0x9B, 0x9D, 0x1F, 0x1F, 0x9E, 0x9C, 0x00, - 0x1F, 0x9F, 0x1F, 0x9E, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x19, 0x08, 0x0C, 0x35, 0x0F, 0x11, 0x15, 0x17, 0x19, 0x1C, 0x00, 0x00, 0x00, - 0x1B, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x18, 0x00, 0x1A, 0x17, 0x12, 0x0F, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0xEC, 0xEE, 0x1D, 0x1C, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD3, 0xD2, 0xD1, 0xD1, 0xD1, 0xD4, 0xDB, - 0xD7, 0xD4, 0xD4, 0xDA, 0xD9, 0xDA, 0xDA, 0xD9, 0xDB, 0xD9, 0xDA, 0xD9, 0xD8, 0xD7, 0xD7, 0xD6, - 0xD5, 0xF3, 0xF3, 0xF4, 0xF5, 0xF6, 0xF6, 0xF6, 0xF6, 0xF7, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x08, 0x35, 0x11, - 0x07, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x18, 0x13, 0x11, 0x12, 0x12, 0x13, - 0x18, 0x08, 0x1C, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0xEC, 0xED, - 0xEE, 0xEC, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0xD5, 0xD3, 0xD2, 0xCF, 0xCF, 0xCF, 0xDB, 0xD3, 0xD8, 0xD6, 0xDA, 0xD9, 0xDA, 0xDC, 0xD9, - 0xDD, 0xD9, 0xDC, 0xD9, 0xD9, 0xD9, 0xD8, 0xD8, 0xD7, 0xD6, 0xDC, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x1A, 0x08, 0x07, 0x08, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, - 0x1C, 0x08, 0x08, 0x18, 0x16, 0x12, 0x12, 0x13, 0x13, 0x18, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1A, 0x1A, 0xEB, 0x1B, 0xEA, 0xEC, 0xED, 0xED, 0x1D, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xDC, 0xD7, 0xD2, 0xD2, 0xD2, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD6, 0xD5, 0xD3, 0xD8, 0xD5, 0xCF, 0xDB, - 0xD8, 0xD8, 0xDA, 0xDC, 0xDA, 0xDC, 0xDE, 0xDC, 0xDD, 0xDA, 0xDC, 0xDA, 0xDA, 0xD9, 0xD9, 0xD9, - 0xD8, 0xD3, 0xD7, 0xDC, 0x9A, 0x1F, 0x9E, 0x1F, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x08, 0x08, - 0x08, 0x1A, 0x19, 0x19, 0x17, 0x07, 0x0F, 0x07, 0x19, 0x1A, 0x08, 0x08, 0x08, 0x18, 0x12, 0x13, - 0x13, 0x14, 0x18, 0x1F, 0x08, 0x18, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x1B, 0xEA, 0xEC, 0xED, - 0xED, 0x1D, 0x1B, 0xEB, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, - 0x00, 0xDE, 0xD6, 0xD2, 0xD2, 0xCF, 0xDB, 0xDA, 0xD7, 0xD7, 0x19, 0x19, 0x19, 0xDB, 0xDB, 0xDB, - 0x19, 0xD8, 0xD6, 0xD8, 0xD3, 0xD3, 0xCF, 0x00, 0xDC, 0xDB, 0xDC, 0xDD, 0xDC, 0xDD, 0xDE, 0xDE, - 0xDF, 0xDD, 0xDC, 0xDC, 0xDC, 0xDC, 0xDA, 0xD8, 0xDA, 0xD9, 0xD7, 0xD5, 0xDC, 0x99, 0x9A, 0x99, - 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1C, 0x1B, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1E, 0x1C, 0x1C, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x1F, 0x1D, 0x18, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0xEA, 0xEC, 0x1E, 0xED, 0x1D, 0xEA, 0xEB, 0x1A, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1C, 0x00, 0xDE, 0xDB, 0xDB, 0xD6, 0xD1, 0xCF, 0xCF, 0xD9, - 0xD1, 0xD7, 0xD7, 0xD7, 0xDB, 0xD9, 0xD9, 0xD7, 0xDB, 0xDB, 0xD8, 0xDA, 0xD3, 0xCF, 0xD6, 0x00, - 0x00, 0xDD, 0xDD, 0xDD, 0xDF, 0x00, 0x00, 0xDE, 0xDF, 0x00, 0x00, 0xDE, 0xDF, 0xDC, 0xDC, 0xDA, - 0xD9, 0xD9, 0xD9, 0xD7, 0xD5, 0x9A, 0x9A, 0x97, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x00, 0x17, 0x13, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x18, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0xEA, 0x1C, 0x1E, - 0xED, 0xED, 0x1D, 0x1B, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1C, 0x00, 0x00, 0x00, - 0xDA, 0xD8, 0xD8, 0xDB, 0xD1, 0xCE, 0xCE, 0xD5, 0xD6, 0xD0, 0xD4, 0xD4, 0xD9, 0xD9, 0xD5, 0xD4, - 0xD7, 0xDA, 0xDA, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0xDF, 0xDF, 0xDF, - 0xDF, 0xDD, 0xDD, 0xDD, 0xD8, 0xDA, 0xD9, 0xD9, 0xD9, 0xD9, 0xD9, 0xD7, 0xD5, 0x9A, 0x98, 0x9B, - 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x00, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x18, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x18, 0x0F, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0xEA, 0x1C, 0x1E, 0xED, 0xED, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1B, - 0x19, 0x19, 0x1A, 0x1C, 0x00, 0x00, 0x00, 0xDC, 0xD9, 0xD8, 0xD6, 0xD4, 0xD4, 0xD0, 0xCE, 0xCE, - 0xD4, 0xD0, 0xD1, 0xD1, 0xD4, 0xD9, 0xD9, 0xD2, 0xD2, 0xDC, 0xD6, 0xD5, 0xD8, 0xDA, 0xDC, 0xDF, - 0xDE, 0x00, 0x00, 0x00, 0xDF, 0xDF, 0xDE, 0xDD, 0xDB, 0xDB, 0xD8, 0xD8, 0xDA, 0xD8, 0xD8, 0xD9, - 0xD9, 0xDA, 0xDB, 0xDE, 0xDE, 0xDE, 0x9A, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1B, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0xEA, 0x1C, 0x1E, - 0xED, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDA, - 0xD9, 0xD8, 0xD6, 0xD6, 0xD4, 0xD0, 0xCE, 0xCE, 0xD1, 0xD1, 0xD0, 0xD0, 0xD1, 0xD2, 0xD9, 0xCF, - 0xD2, 0xD6, 0xD2, 0xD6, 0xD5, 0xD8, 0xDA, 0xDC, 0xDE, 0x00, 0x00, 0x00, 0xDE, 0xDE, 0xDC, 0xDB, - 0xDB, 0xD8, 0xD8, 0xD9, 0xDA, 0xD8, 0xDA, 0xDE, 0xDE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9A, 0x9B, - 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1F, 0x1D, 0x19, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1A, 0x1A, 0xEB, 0xEA, 0xEA, 0x1E, 0xED, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDA, 0xD9, 0xD8, 0xD6, 0xD6, 0xD4, 0xD0, 0xCE, 0xCE, - 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD1, 0xD2, 0xCF, 0xCE, 0xD3, 0xD6, 0xD2, 0xD4, 0xD2, 0xD7, 0xDA, - 0xDE, 0x00, 0x00, 0x00, 0xDE, 0xDC, 0xDA, 0xDB, 0xD6, 0xD5, 0xD8, 0xDA, 0xD4, 0xD9, 0xDE, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9A, 0x9C, 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x12, 0x12, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0x1B, 0xEA, 0xED, - 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDA, - 0xD9, 0xD8, 0xD6, 0xD6, 0xD4, 0xD0, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xD2, 0xCF, - 0xCE, 0xD3, 0xD6, 0xD1, 0xD2, 0xD0, 0xD5, 0xDA, 0x00, 0x00, 0x00, 0xDE, 0xDA, 0xD9, 0xDB, 0xD6, - 0xD4, 0xD5, 0xD9, 0xDA, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9B, - 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x07, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x0F, 0x07, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0xEB, 0x1B, 0xEA, 0xEE, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDA, 0xD9, 0xD8, 0xD6, 0xD6, 0xD4, 0xD0, 0xCF, 0xCF, - 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCE, 0xD1, 0xD6, 0xCE, 0xD2, 0xD0, 0xD5, 0xDA, - 0x00, 0x00, 0x00, 0xDE, 0xDA, 0xD8, 0xD9, 0xD6, 0xD3, 0xD5, 0xD9, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xDC, 0xDA, 0xDA, 0xDB, 0xDB, 0xDC, 0x00, 0x9D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x1B, 0x1D, - 0x1E, 0x1E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, 0x1B, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x12, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1B, 0xEA, 0x1D, - 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDA, - 0xD9, 0xD9, 0xD6, 0xD6, 0xD4, 0xD0, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, - 0xCE, 0xD1, 0xD6, 0xCE, 0xD2, 0xCF, 0xD5, 0xDA, 0x00, 0x00, 0x00, 0xDE, 0xDA, 0xDA, 0xD7, 0xD6, - 0xD5, 0xD7, 0x1C, 0x1C, 0x00, 0x00, 0x00, 0xDC, 0xD8, 0xD8, 0xDA, 0xDB, 0x00, 0x00, 0x1E, 0x1C, - 0x1F, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x1B, 0x1D, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x18, 0x08, 0x0C, 0x35, 0x0F, 0x12, 0x07, 0x18, 0x1A, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x04, 0x22, 0x22, 0x35, 0x0C, 0x35, 0x22, 0x04, 0x07, 0x14, 0x12, 0x0F, 0x1A, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1B, 0x1B, 0xEC, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, - 0x9F, 0x9F, 0x00, 0x9F, 0x00, 0x00, 0x00, 0xDA, 0xD9, 0xD9, 0xD6, 0xD4, 0xD3, 0xD0, 0xCE, 0xCF, - 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCF, 0xCE, 0xD1, 0xD6, 0xCE, 0xCE, 0xCE, 0xD5, 0xDA, - 0x00, 0x00, 0x00, 0xDE, 0xDA, 0xD7, 0xD7, 0xD3, 0xD9, 0x00, 0x00, 0x1D, 0x19, 0x00, 0xD7, 0xD7, - 0xD7, 0xDA, 0xDB, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1C, 0x1D, 0x00, 0xDD, 0xD7, 0xD8, 0x00, 0x00, - 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x08, 0x35, 0x07, - 0x08, 0x1B, 0x1A, 0x18, 0x17, 0x17, 0x07, 0x12, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x33, - 0x0C, 0x04, 0x14, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0x1B, 0xEC, - 0xEE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x9F, 0x00, 0x00, 0x00, 0xDB, - 0xD9, 0xD9, 0xD8, 0xD3, 0xD1, 0xCF, 0xCE, 0xCE, 0xD2, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD2, 0xCF, - 0xCE, 0xD3, 0xD6, 0xCE, 0xCE, 0xCE, 0xD5, 0xDA, 0x00, 0x00, 0x00, 0xDE, 0xDA, 0xD7, 0xD3, 0xD8, - 0x00, 0x08, 0x00, 0x1C, 0x07, 0xD5, 0xD5, 0xD7, 0xD9, 0xDB, 0x00, 0x00, 0x00, 0x1B, 0x19, 0x00, - 0xD7, 0x00, 0x00, 0x00, 0xDD, 0xDD, 0xDB, 0xDB, 0x1E, 0x18, 0x1C, 0x1C, 0x1C, 0x1C, 0x08, 0x1A, - 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x08, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x1A, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0x1B, 0xEC, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x9F, 0x00, 0x00, 0x9F, 0x00, 0x00, 0xDB, 0xDA, 0xD8, 0xD6, 0xD1, 0xD0, 0xCF, 0xCE, 0xD5, - 0xCF, 0xD0, 0xD0, 0xD0, 0xD0, 0xD2, 0xD2, 0xCF, 0xD1, 0xD6, 0xD3, 0xD1, 0xCE, 0xCE, 0xD2, 0xDC, - 0x00, 0x00, 0x00, 0xDE, 0xDA, 0xD7, 0xD8, 0x00, 0x00, 0x00, 0x08, 0x11, 0xD5, 0xD5, 0xD5, 0xD5, - 0xD7, 0x00, 0x00, 0x00, 0x1B, 0x19, 0x00, 0xD7, 0x00, 0xD3, 0xD3, 0xD3, 0xD3, 0xD3, 0xD4, 0xDE, - 0x1D, 0x18, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x18, 0x07, 0x07, 0x08, 0x08, 0x04, 0x21, 0x36, - 0x35, 0x0C, 0x21, 0x27, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0x1B, 0x1C, - 0x1D, 0x1E, 0xEE, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xDB, 0xD6, 0xD3, 0xD0, 0xCF, 0xCC, 0xCF, 0xD3, 0xCE, 0xD1, 0xD1, 0xD1, 0xD2, 0xD4, 0xD6, 0xCF, - 0xD2, 0xD9, 0xD0, 0xD0, 0xCE, 0xD1, 0xD5, 0x1C, 0x1C, 0x08, 0x1A, 0xDE, 0xDA, 0xD8, 0xDE, 0x00, - 0x00, 0x00, 0x1F, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xDA, 0x00, 0x1B, 0x19, 0x00, 0xD7, 0x00, - 0xD3, 0xD5, 0xD2, 0xD2, 0xCD, 0xCF, 0x1B, 0xDB, 0x1D, 0x17, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x16, 0x18, 0x1A, 0x1C, 0x1E, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x17, - 0x13, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x37, 0x35, 0x0C, 0x21, 0x29, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0xEB, 0xEB, 0x1C, 0x1D, 0xEE, 0x1E, 0xEE, 0x1C, 0x1B, 0x1A, 0x1A, - 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1D, 0x1E, 0x00, 0xDB, 0xD7, 0xD2, 0xD0, 0xCC, 0xCF, 0xD3, 0xCF, - 0xD2, 0xD5, 0xD5, 0xD5, 0xD8, 0xD8, 0xD5, 0xD2, 0xD2, 0xDA, 0xD1, 0xCE, 0xD0, 0xD0, 0xD4, 0x1C, - 0x19, 0x19, 0x18, 0xDE, 0xDA, 0xDE, 0x00, 0x00, 0x00, 0x1F, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, - 0xDA, 0xDA, 0xDC, 0x00, 0x00, 0xD7, 0x00, 0xD4, 0xD1, 0xCD, 0xCF, 0xCF, 0xC9, 0xCE, 0x96, 0xDB, - 0x1D, 0x17, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x08, 0x0C, 0x25, 0x00, - 0x07, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x17, 0x10, 0x1B, 0x00, 0x00, 0x19, 0x15, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x17, 0x0C, 0x29, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0x1C, - 0x1D, 0xEE, 0x1E, 0x1E, 0x1D, 0x1C, 0x1A, 0x1A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0xDF, 0xDB, 0xD2, 0xD2, 0xD7, 0xD3, 0xDB, 0xD8, 0xD8, 0xD8, 0xD8, 0xDA, 0xDD, 0xD7, 0xD5, - 0xD7, 0xDA, 0xDA, 0xD7, 0xD4, 0xD4, 0xD4, 0x1C, 0x19, 0x18, 0x17, 0xDE, 0xDB, 0x00, 0x00, 0x00, - 0x1F, 0xDC, 0xDA, 0xDA, 0xDA, 0xD9, 0xD9, 0xD9, 0xD9, 0xDC, 0xDC, 0x00, 0xCD, 0xD1, 0x00, 0xD1, - 0xCB, 0xD4, 0xCF, 0xD5, 0xD2, 0xCB, 0xDB, 0xD7, 0x1D, 0x07, 0x1A, 0x08, 0x08, 0x08, 0x08, 0x1A, - 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x1E, 0x0C, 0x35, 0x36, 0x08, 0x07, 0x1C, 0x1D, 0x1D, 0x1D, 0x13, 0x2D, - 0x00, 0x00, 0x19, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x18, 0x0C, 0x21, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0xEA, 0xEC, 0x1D, 0x1E, 0x1E, 0x1E, 0x00, 0x00, 0x00, - 0x00, 0x1E, 0x1B, 0x1A, 0x19, 0x1A, 0x1B, 0x1E, 0x00, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, - 0xDF, 0xDF, 0xDE, 0xDE, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDF, 0xDE, 0xDC, 0xDC, 0xDC, 0x08, - 0x18, 0x18, 0x17, 0xDE, 0xDE, 0x00, 0x00, 0x1F, 0xDC, 0xD5, 0xD5, 0xD5, 0xD5, 0xD6, 0xD7, 0xD7, - 0xD7, 0xDA, 0xDC, 0x00, 0xD0, 0xD7, 0x00, 0xD1, 0xCB, 0xD2, 0xCF, 0xD7, 0xCF, 0xD1, 0xD1, 0xD3, - 0x1D, 0x07, 0x19, 0x1A, 0x1A, 0x1A, 0x1A, 0x19, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1E, 0x0C, 0x35, 0x36, - 0x23, 0x08, 0x07, 0x1D, 0x1D, 0x1C, 0x17, 0x2D, 0x00, 0x00, 0x17, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x08, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xEB, 0x1B, - 0x1C, 0x1D, 0x1E, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xDF, 0xDF, 0xDF, 0xDE, 0xDE, 0xDF, 0xDD, 0xDD, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDE, 0xDD, 0xDD, - 0xDF, 0xDC, 0xDC, 0xDC, 0xDA, 0xD8, 0xDA, 0x08, 0x18, 0x18, 0x16, 0xDE, 0x00, 0x00, 0x00, 0xDC, - 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD5, 0xD2, 0xD2, 0xD5, 0xDA, 0x00, 0x00, 0xD3, 0xD7, 0x00, 0xCD, - 0xCB, 0xD2, 0xCB, 0xD7, 0xC9, 0xC9, 0xCD, 0xD1, 0x1D, 0x07, 0x18, 0x19, 0x19, 0x19, 0x19, 0x18, - 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1F, 0x1E, 0x00, 0x0C, 0x35, 0x36, 0x23, 0x08, 0x12, 0x1D, 0x1D, 0x17, 0x1B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x08, 0x37, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xEB, 0x1B, 0xEA, 0x1D, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDF, 0xDF, 0xDF, 0xDE, 0xDE, 0xDE, 0xDD, 0xDE, - 0xDE, 0xDD, 0xDD, 0xDB, 0xDD, 0xDD, 0xDD, 0xDD, 0xD9, 0xD9, 0xD8, 0xD8, 0xD7, 0xD7, 0xD7, 0x1A, - 0x18, 0x17, 0x16, 0xDE, 0x00, 0x00, 0xDC, 0xD5, 0xD8, 0xD8, 0xD8, 0xD8, 0xDA, 0xDA, 0xD3, 0xD2, - 0xD5, 0x00, 0x00, 0x00, 0x00, 0xD3, 0x00, 0xCD, 0xCB, 0xD2, 0xCB, 0xD3, 0xCD, 0xCB, 0xDB, 0xD7, - 0x1D, 0x07, 0x17, 0x18, 0x18, 0x18, 0x18, 0x17, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x00, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x08, 0x0F, 0x1D, 0x1D, 0x17, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x18, 0x24, 0x24, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, - 0x1B, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xDF, 0xDD, 0xDF, 0xDB, 0xDE, 0xDC, 0xDE, 0xDB, 0xDB, 0xDA, 0xDC, 0xDB, 0xDD, 0xDD, 0xDD, 0xDD, - 0xD9, 0xD9, 0xD8, 0xD8, 0xD8, 0xD8, 0xD8, 0xDC, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0xD7, 0xD8, - 0xD2, 0xD2, 0xD2, 0xD2, 0xD5, 0xD9, 0xCE, 0xD2, 0xD2, 0x00, 0x11, 0x18, 0x00, 0xD6, 0x00, 0xCD, - 0xCA, 0xCA, 0xCA, 0xCB, 0xC8, 0xCC, 0x1B, 0xDB, 0x1D, 0x13, 0x17, 0x17, 0x17, 0x17, 0x17, 0x15, - 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x17, 0x0F, 0x1D, 0x08, 0x19, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x08, 0x04, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0xEB, 0x1B, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, 0xDF, 0xDF, 0xDB, 0xDB, 0xDB, 0xDE, 0xDB, 0xD9, - 0xDA, 0xDA, 0xDA, 0xDA, 0xDC, 0xDC, 0xDD, 0xDE, 0xD9, 0xD8, 0xD8, 0xD9, 0xD9, 0xD9, 0xD9, 0xDA, - 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0xDC, 0xD8, 0xD8, 0xD6, 0xD6, 0xD6, 0xD8, 0xDA, 0xD6, 0xCE, 0xD1, - 0xD2, 0x00, 0x07, 0x11, 0x00, 0x00, 0xD2, 0xDD, 0xC9, 0xCD, 0xCE, 0xCB, 0xC8, 0xCC, 0x96, 0xDB, - 0x1D, 0x12, 0x07, 0x17, 0x17, 0x17, 0x15, 0x14, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x0F, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x08, 0x11, 0x17, 0x08, 0x19, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x18, 0x08, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, - 0x1A, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE9, - 0xDE, 0xDB, 0xDA, 0xD9, 0xDA, 0xDB, 0xD9, 0xD9, 0xD9, 0xDA, 0xD9, 0xD8, 0xDA, 0xDC, 0xDD, 0xDE, - 0xD7, 0xD7, 0xD8, 0xD8, 0xD8, 0xD9, 0xDA, 0xDA, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0xD8, 0xD8, 0xD3, - 0xD2, 0xD2, 0xD2, 0xD5, 0xD9, 0xD4, 0x07, 0xD1, 0xCF, 0xD9, 0x00, 0x07, 0x11, 0x08, 0x00, 0xD2, - 0xDD, 0xCE, 0xC9, 0xC9, 0xC8, 0xCA, 0xCE, 0xDE, 0x1D, 0x11, 0x07, 0x07, 0x07, 0x14, 0x13, 0x13, - 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x07, 0x0F, 0x33, 0x0C, 0x35, 0x36, 0x08, 0x08, 0x08, 0x08, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x14, 0x14, 0x07, 0x07, 0x08, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9F, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x00, 0xE9, 0xDE, 0xD9, 0xD9, 0xD9, 0xD9, 0xD8, 0xD7, 0xD7, - 0xD9, 0xD9, 0xD9, 0xD8, 0xD7, 0xDA, 0xDC, 0xDD, 0xD4, 0xD4, 0xD7, 0xD7, 0xD8, 0xD8, 0xDA, 0xDA, - 0x1F, 0x1F, 0x1F, 0x00, 0xDC, 0xD5, 0xD8, 0xD3, 0xD2, 0xD2, 0xD2, 0xD5, 0xD8, 0xD4, 0x07, 0xD1, - 0xCF, 0xD4, 0x00, 0x00, 0x08, 0x1E, 0x1E, 0x00, 0xD6, 0xD6, 0xDE, 0xDA, 0xDA, 0x00, 0xDB, 0xDB, - 0x1D, 0x11, 0x07, 0x07, 0x07, 0x13, 0x13, 0x17, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x07, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x00, 0x08, 0x04, 0x04, - 0x00, 0x14, 0x14, 0x07, 0x07, 0x07, 0x08, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x1A, 0x1A, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x00, 0x9F, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x00, 0xE9, - 0xDB, 0xD9, 0xD9, 0xD7, 0xD5, 0xD7, 0xD6, 0xD6, 0xD8, 0xD8, 0xD7, 0xD7, 0xD7, 0xD8, 0xDB, 0xDD, - 0xD2, 0xD2, 0xD2, 0xD2, 0xD7, 0xD7, 0xDA, 0xDE, 0x00, 0x00, 0x00, 0x00, 0xD8, 0xD5, 0xD6, 0xD4, - 0xD4, 0xD4, 0xD4, 0xD4, 0xDA, 0xD6, 0xCE, 0xD1, 0xCF, 0xCE, 0xD9, 0x00, 0x1E, 0x1E, 0x1E, 0x1E, - 0x08, 0x1D, 0x1D, 0xCE, 0xCE, 0xD6, 0x00, 0x00, 0x1A, 0x11, 0x07, 0x07, 0x07, 0x13, 0x17, 0x08, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x07, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x00, 0x08, 0x04, 0x00, 0x13, 0x14, 0x14, 0x07, 0x07, 0x12, 0x0F, 0x0F, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x00, - 0x9F, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x00, 0xE9, 0xDB, 0xDA, 0xD9, 0xD7, 0xD3, 0xD7, 0xD3, 0xD4, - 0xD4, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xDD, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xD0, 0xDC, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xD8, 0xD7, 0xD5, 0xD7, 0xD2, 0xD2, 0xD2, 0xD2, 0xD8, 0xD9, 0xCE, 0xD1, - 0xCF, 0xCE, 0xD3, 0xDD, 0x00, 0x1F, 0x1C, 0xF8, 0x7D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x1D, 0x1C, - 0x13, 0x13, 0x07, 0x07, 0x17, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x18, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x1E, 0x07, 0x12, 0x08, 0x1D, 0x25, 0x00, - 0x13, 0x14, 0x14, 0x07, 0x12, 0x12, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x1F, 0x1B, 0x1A, 0x1B, 0x1D, 0x9F, 0x9F, 0x9F, 0xE9, - 0xD9, 0xD9, 0xD9, 0xD4, 0xD3, 0xD7, 0xD3, 0xD4, 0xD1, 0xD4, 0xD6, 0xD6, 0xD7, 0xD2, 0xD8, 0xD9, - 0xD0, 0xD7, 0xD5, 0xD3, 0xD3, 0x00, 0xD7, 0xDF, 0x00, 0x00, 0x00, 0xDC, 0xDA, 0xD7, 0xD5, 0xD6, - 0xD7, 0xD5, 0xD5, 0xD5, 0xD5, 0xD8, 0xD3, 0xD2, 0xCC, 0xCC, 0xCE, 0xDD, 0x18, 0x08, 0xF6, 0xF8, - 0xF5, 0x1D, 0x1D, 0x1D, 0x08, 0x1A, 0x13, 0x18, 0x18, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x18, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x08, 0x12, 0x07, 0x08, 0x1D, 0x23, 0x00, 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x00, 0x00, 0x9F, 0x9F, 0x1B, - 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1C, 0x00, 0x9F, 0xD6, 0xD6, 0xD9, 0xD4, 0xD0, 0xD3, 0xD0, 0xD4, - 0xD0, 0xD0, 0xD4, 0xD3, 0xD6, 0xD2, 0xD3, 0xD9, 0xD7, 0xD3, 0xD3, 0xCE, 0xCA, 0xD9, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xDE, 0xDC, 0xDA, 0xD9, 0xD9, 0xD7, 0xD7, 0xD7, 0xD7, 0xD7, 0xD2, 0xD1, 0xD1, - 0xCC, 0xCC, 0xCE, 0xDD, 0x07, 0x08, 0xF5, 0xF8, 0xFA, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x18, 0x1A, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x1A, 0x07, 0x18, 0x1D, 0x1D, 0x37, 0x37, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0xD2, 0xD6, 0xD6, 0xD4, 0xD0, 0xD2, 0xD0, 0xD4, 0xD1, 0xD0, 0xD0, 0xD0, 0xD2, 0xD3, 0xD1, 0xD9, - 0xD7, 0xD3, 0xCC, 0xCE, 0xCE, 0xCA, 0xD9, 0xD9, 0xDF, 0xDF, 0xDF, 0x00, 0xDE, 0xDE, 0xDE, 0xDE, - 0xDE, 0xDC, 0xDA, 0xDA, 0xD7, 0xD7, 0xD7, 0xD1, 0xCC, 0xCC, 0xCE, 0x19, 0x16, 0x08, 0xF4, 0xF8, - 0xF5, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x1A, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x1A, 0x07, 0x07, 0x1B, 0x1D, 0x1D, 0x1D, 0x36, 0x0C, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD2, 0xD2, 0xD2, 0xD0, 0xD0, 0xCD, 0xD0, - 0xD4, 0xD1, 0xD0, 0xD4, 0xD2, 0xD6, 0xD9, 0xD7, 0xD3, 0xCC, 0xCA, 0xCB, 0xCE, 0xCA, 0xD9, 0xDC, - 0xDC, 0xDC, 0xDC, 0xDE, 0xDE, 0xD9, 0xDD, 0xED, 0xED, 0xD9, 0xD9, 0xDA, 0xD9, 0xD2, 0xD7, 0xD0, - 0xD0, 0xD0, 0xD0, 0x18, 0x08, 0xF8, 0xF4, 0xF8, 0x6A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1A, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x1A, 0x07, 0x13, 0x07, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x0C, 0x22, 0x14, 0x07, 0x07, 0x07, 0x19, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0xD4, 0xD0, 0xD0, 0xD2, 0xD2, 0x19, 0x19, 0x19, 0xD5, 0xD5, 0xD9, 0xD7, - 0xD3, 0xCA, 0xC8, 0xC7, 0xC7, 0xCE, 0xD9, 0xD4, 0xD7, 0xD8, 0xDA, 0xDC, 0xD7, 0x00, 0xD9, 0xDD, - 0xDA, 0xD7, 0xD6, 0xD9, 0xD8, 0xD1, 0xD0, 0xD3, 0xCC, 0xCC, 0xD0, 0x08, 0x08, 0xF6, 0xF3, 0xF8, - 0x5B, 0x67, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x07, 0x12, 0x12, 0x11, 0x0F, 0x0F, - 0x11, 0x17, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x07, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x10, 0x11, 0x12, - 0x07, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x26, 0x07, 0x07, 0x07, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD3, 0xCC, 0xC8, 0xC7, 0xC7, 0xCA, 0xD1, 0xD5, 0xD0, - 0xD4, 0xD4, 0xD4, 0xD7, 0xD6, 0xD3, 0xDA, 0xD3, 0xD5, 0xD1, 0xD1, 0xD7, 0xD3, 0xD0, 0xCC, 0xCC, - 0xCC, 0xCC, 0xCF, 0xD2, 0x19, 0xF4, 0xF3, 0xF8, 0x59, 0x61, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x16, 0x07, 0x18, 0x18, 0x17, 0x16, 0x15, 0x07, 0x07, 0x0F, 0x0F, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x07, 0x0F, - 0x13, 0x07, 0x07, 0x07, 0x07, 0x17, 0x17, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0x00, 0x08, 0x29, 0x15, 0x12, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0xCC, 0xC7, 0xC7, 0xCA, 0xD1, 0xD5, 0xD0, 0xD0, 0xD0, 0xCC, 0xD2, 0xD3, 0xD5, 0xCF, 0xD8, 0xD1, - 0xD5, 0xCE, 0xCC, 0xD1, 0xD1, 0xD0, 0xCC, 0xCC, 0xCE, 0xCC, 0xCF, 0xD2, 0xF5, 0xF4, 0xF3, 0xF8, - 0x41, 0x61, 0x6E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x17, 0x08, 0x18, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x19, 0x07, 0x0F, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x29, 0x2C, 0x2C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x08, 0x0F, 0x0F, 0x16, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xCC, 0xCC, 0xD1, 0xD5, 0xD0, 0xCE, 0xCC, - 0xCC, 0xCE, 0xD1, 0xD3, 0xD5, 0xCF, 0xD6, 0xCE, 0xD1, 0xCE, 0xCC, 0xD1, 0xD0, 0xCC, 0xCC, 0xCE, - 0xCF, 0xCF, 0xD0, 0xF7, 0xF6, 0xF6, 0xF4, 0xF8, 0x58, 0x02, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x08, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x04, 0x00, 0x07, 0x11, 0x1B, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x27, - 0x29, 0x00, 0x18, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1D, 0x08, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x18, 0x00, 0x14, 0x00, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0xD9, 0xD6, 0xD0, 0xD0, 0xCE, 0xCC, 0xCC, 0xCC, 0xD0, 0xD1, 0xCC, 0xD3, 0xCE, - 0xCE, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xD0, 0xD0, 0xD0, 0xF7, 0xF7, 0xF7, 0xF6, 0xF6, 0xF8, - 0x5B, 0x6A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x00, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x08, 0x08, 0x08, 0x00, 0x07, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x04, 0x04, 0x00, 0x18, 0x12, 0x11, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x08, 0x1A, 0x19, 0x18, 0x17, 0x15, 0x15, 0x13, 0x11, 0x0F, - 0x0F, 0x11, 0x13, 0x15, 0x15, 0x12, 0x0F, 0x12, 0x07, 0x00, 0x14, 0x07, 0x04, 0x08, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD6, 0xD3, 0xD0, 0xCC, - 0xD0, 0xD0, 0xCE, 0xD1, 0xCC, 0xCC, 0xD1, 0xCC, 0xCE, 0xCC, 0xCC, 0xCC, 0xCC, 0xCD, 0xD0, 0xD2, - 0xF9, 0xF8, 0xF8, 0xF9, 0xF7, 0xF6, 0xF6, 0xF8, 0x68, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x30, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x08, 0x17, 0x07, 0x07, 0x07, 0x07, 0x17, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x25, 0x04, 0x19, - 0x19, 0x14, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1A, 0x0C, 0x00, 0x1F, - 0x1E, 0x1D, 0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1D, 0x1E, 0x1F, - 0x00, 0x00, 0x14, 0x07, 0x07, 0x04, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD6, 0xD4, 0xD3, 0xD3, 0xD2, 0xD1, 0xCC, 0xD0, 0xD1, 0xCC, - 0xCC, 0xCC, 0xCD, 0xD0, 0xD0, 0xD2, 0xF7, 0xF8, 0xF8, 0xF8, 0xF8, 0xF9, 0xF8, 0xF7, 0xF6, 0xF8, - 0xF5, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x30, 0x30, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x08, 0x17, - 0x19, 0x1D, 0x08, 0x08, 0x08, 0x1A, 0x19, 0x18, 0x18, 0x17, 0x07, 0x14, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x20, 0x23, 0x18, 0x19, 0x19, 0x17, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1F, 0x08, 0x18, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x1D, 0x00, 0x1D, 0x17, 0x0F, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x04, 0x0C, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0xD6, 0xD4, 0xD4, 0xCF, 0xCF, 0xCF, 0xCF, 0xCC, 0xCC, 0xD2, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, - 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0x7D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0x10, 0x30, 0x30, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x08, 0x17, 0x19, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x32, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x34, 0x20, 0x18, 0x19, - 0x19, 0x1B, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x1A, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x04, 0x35, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0xD6, 0xD0, 0xCF, 0xCF, 0xD0, - 0xD2, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, - 0xF7, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1F, 0x00, 0x17, 0x10, 0x30, 0x30, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x08, 0x19, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x00, 0x00, 0x17, 0x13, 0x0C, 0x22, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x28, 0x34, 0x18, 0x18, 0x19, 0x19, 0x1D, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1E, 0x18, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x17, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x04, 0x36, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, 0x1B, 0xFC, 0xFA, 0xFB, 0xFC, 0xFB, 0xFC, 0xFD, - 0xFD, 0xFE, 0xFE, 0xFE, 0xFE, 0xFD, 0xFC, 0xFC, 0xFC, 0x7F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x12, 0x0F, 0x10, 0x30, 0x30, 0x31, - 0x32, 0x33, 0x0C, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x00, 0x1A, - 0x11, 0x04, 0x0C, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x26, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x1E, 0x19, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, 0x16, 0x04, 0x22, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, - 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x17, - 0x1B, 0xF1, 0xF7, 0x7E, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, - 0x7F, 0xFC, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x18, 0x12, 0x10, 0x30, 0x30, 0x31, 0x32, 0x33, 0x00, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1C, 0x1A, 0x18, 0x00, 0x00, 0x00, 0x17, 0x0F, 0x04, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x28, 0x08, 0x18, 0x19, 0x19, 0x1A, 0x1A, 0x1F, 0x08, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x16, 0x17, 0x04, 0x22, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x17, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x98, 0x96, 0x96, 0x96, 0x96, 0x98, 0x1F, 0x99, - 0x9A, 0x9A, 0x9A, 0x9A, 0x9B, 0x99, 0x00, 0x9B, 0x9A, 0x99, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x12, 0x10, 0x30, 0x31, - 0x32, 0x00, 0x18, 0x07, 0x13, 0x12, 0x11, 0x10, 0x0F, 0x0F, 0x12, 0x16, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x04, 0x08, 0x08, 0x08, 0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x00, 0x00, 0x18, 0x19, - 0x19, 0x1A, 0x18, 0x15, 0x11, 0x1D, 0x1D, 0x1D, 0x1D, 0x13, 0x0F, 0x07, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, 0x00, 0x1A, 0x13, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, 0x16, 0x17, 0x17, 0x28, 0x24, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x17, - 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9A, 0x98, 0x97, 0x99, 0x99, 0x97, 0x1F, 0x9B, 0x9B, 0x9A, 0x99, 0x97, 0x98, 0x99, 0x00, 0x9D, - 0x98, 0x97, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x0F, 0x30, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x19, 0x19, 0x1A, 0x15, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x07, 0x0F, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x2A, 0x2D, 0x00, - 0x1B, 0x17, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x07, 0x16, 0x16, - 0x07, 0x17, 0x17, 0x17, 0x04, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9E, 0x9B, 0x9A, 0x96, 0x97, 0x97, 0x9C, 0x9E, - 0x9E, 0x9D, 0x9D, 0x9B, 0x9B, 0x9B, 0x00, 0x9B, 0x9B, 0x98, 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x12, 0x15, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x04, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x0F, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x15, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x07, 0x0C, 0x35, 0x0F, - 0x12, 0x07, 0x17, 0x18, 0x1A, 0x18, 0x07, 0x10, 0x14, 0x16, 0x19, 0x1C, 0x1D, 0x1F, 0x00, 0x00, - 0x00, 0x00, 0x14, 0x07, 0x07, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x19, 0x04, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, - 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9D, 0x98, 0x9B, 0x98, 0x99, 0x96, 0x9A, 0x9F, 0x9F, 0x9B, 0x9D, 0x9A, 0x9C, 0x9B, 0x00, 0x9D, - 0x9C, 0x98, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x17, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x12, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x19, 0x35, 0x12, 0x0F, 0x08, 0x1A, 0x1A, 0x1A, 0x18, 0x17, 0x07, - 0x17, 0x18, 0x18, 0x18, 0x19, 0x1A, 0x08, 0x08, 0x08, 0x00, 0x14, 0x07, 0x07, 0x0F, 0x10, 0x11, - 0x12, 0x13, 0x13, 0x14, 0x15, 0x15, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9C, 0x9C, 0x9D, 0x98, 0x96, 0x96, 0x9C, 0x9E, - 0x9E, 0x9D, 0x9E, 0x9D, 0x9E, 0x9B, 0x00, 0x9E, 0x9E, 0x99, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x08, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x1A, 0x18, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x15, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1A, 0x15, - 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0x00, 0x14, 0x07, 0x07, 0x0F, 0x11, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9E, 0x9B, 0x9C, 0x9A, 0x98, 0x97, 0x9E, 0x1F, 0x1F, 0x9E, 0x9B, 0x99, 0x98, 0x99, 0x00, 0x9C, - 0x9A, 0x9E, 0x9A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x19, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, 0x0F, 0x00, 0x1A, 0x15, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x12, 0x11, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x08, 0x07, 0x0F, 0x12, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9E, 0x9D, 0x9F, 0x9C, 0x9B, 0x9D, 0x00, 0x99, - 0x99, 0x9B, 0x97, 0x98, 0x95, 0x98, 0x00, 0x9F, 0x9D, 0x9B, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1B, 0x18, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x1E, 0x07, - 0x0F, 0x00, 0x08, 0x18, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x0F, 0x15, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x08, - 0x1A, 0x19, 0x18, 0x17, 0x16, 0x07, 0x13, 0x11, 0x11, 0x13, 0x07, 0x17, 0x18, 0x19, 0x08, 0x08, - 0x04, 0x04, 0x08, 0x08, 0x08, 0x07, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x00, 0x99, 0x99, 0x98, 0x99, 0x9C, 0x9B, 0x9B, 0x00, 0x9C, - 0x9D, 0x9C, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x1B, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x00, 0x00, 0x00, 0x1A, 0x13, 0x0F, 0x00, 0x08, 0x18, 0x16, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x16, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1C, 0x08, 0x08, 0x1D, 0x1D, 0x00, 0x00, 0x1E, 0x1D, 0x1C, 0x08, 0x18, 0x07, - 0x07, 0x17, 0x18, 0x08, 0x1D, 0x1D, 0x1B, 0x18, 0x0C, 0x0C, 0x04, 0x00, 0x08, 0x08, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9A, 0x99, 0x99, 0x1F, 0x9D, 0x9E, 0x00, 0x9D, - 0x9B, 0x99, 0x9A, 0x95, 0x9D, 0x9D, 0x00, 0x9E, 0x9E, 0x9E, 0x9E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x00, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x00, 0x00, 0x1E, 0x1A, 0x07, 0x10, - 0x15, 0x1B, 0x00, 0x08, 0x1A, 0x16, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x15, - 0x11, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x08, 0x1C, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x00, 0x15, 0x13, 0x12, 0x12, 0x13, - 0x13, 0x16, 0x0C, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9B, 0x99, 0x9A, 0x1F, 0x9C, 0x97, 0x00, 0x9C, 0x9D, 0x9E, 0x9E, 0x9C, 0x9C, 0x9E, 0x00, 0x99, - 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x08, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x07, 0x13, - 0x12, 0x0F, 0x0F, 0x11, 0x13, 0x16, 0x17, 0x17, 0x17, 0x1A, 0x00, 0x1F, 0x1D, 0x2C, 0x28, 0x23, - 0x37, 0x35, 0x0C, 0x33, 0x33, 0x31, 0x07, 0x0F, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1C, 0x00, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x18, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x16, 0x0C, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9C, 0x9B, 0x98, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x9C, 0x9C, 0x9A, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, - 0x08, 0x08, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x16, 0x07, 0x07, 0x16, 0x18, 0x1A, 0x08, 0x1B, 0x1A, - 0x19, 0x18, 0x16, 0x1D, 0x1D, 0x1B, 0x1A, 0x19, 0x18, 0x17, 0x16, 0x07, 0x07, 0x31, 0x07, 0x11, - 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x19, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9E, 0x99, 0x99, 0x00, 0x98, 0x9A, 0x9B, 0x98, 0x9A, 0x99, 0x98, 0x96, 0x9C, 0x98, 0x00, 0x9D, - 0x9A, 0x9C, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x04, 0x1C, 0x1C, 0x1C, 0x04, 0x04, 0x04, 0x21, 0x2B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x18, 0x08, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x16, 0x1B, 0x1B, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9E, 0x9B, 0x9A, 0x00, 0x98, 0x9D, 0x9C, 0x9B, - 0x9E, 0x9D, 0x9C, 0x9A, 0x9E, 0x9D, 0x00, 0x9E, 0x9D, 0x9A, 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x04, 0x00, 0x00, 0x00, 0x08, 0x1A, - 0x04, 0x36, 0x28, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x1E, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x19, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9E, 0x9E, 0x9E, 0x00, 0x9A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9D, 0x9B, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x04, 0x00, 0x00, 0x00, 0x07, 0x18, 0x35, 0x24, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x07, 0x1C, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, - 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x16, 0x1B, 0x1B, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9A, 0x98, - 0x98, 0x98, 0x98, 0x99, 0x9B, 0x9A, 0x99, 0x98, 0x98, 0x98, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x29, 0x00, 0x00, 0x00, 0x07, - 0x13, 0x04, 0x34, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x07, 0x08, 0x33, 0x0C, 0x35, 0x36, - 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x04, 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x19, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9B, 0x98, 0x99, 0x93, 0x96, 0x1F, 0x9E, 0x99, 0x96, 0x98, 0x9A, 0x99, 0x9A, 0x97, 0x99, 0x98, - 0x97, 0x96, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x29, 0x00, 0x00, 0x00, 0x07, 0x12, 0x04, 0x33, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x18, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x25, 0x04, 0x28, 0x29, 0x04, 0x00, - 0x1B, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x16, 0x1B, 0x1A, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9B, 0x99, 0x9A, 0x96, 0x95, 0x1F, 0x9D, 0x9E, - 0x9A, 0x9D, 0x9B, 0x9C, 0x9C, 0x9B, 0x9A, 0x9B, 0x9A, 0x98, 0x97, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x07, - 0x11, 0x04, 0x32, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x33, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x08, 0x08, 0x04, 0x28, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x08, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9E, 0x9D, 0x99, 0x99, 0x97, 0x1F, 0x9E, 0x9E, 0x9D, 0x9E, 0x9E, 0x9D, 0x9E, 0x9D, 0x9D, 0x9E, - 0x9D, 0x9B, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x6E, 0x6A, 0x6C, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x00, 0x00, 0x16, 0x10, 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x18, 0x1C, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x07, 0x0F, 0x0F, 0x08, 0x28, 0x29, 0x04, 0x00, - 0x0F, 0x07, 0x07, 0x08, 0x00, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x18, 0x17, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9D, 0x9E, 0x9A, 0x9C, 0x96, 0x1F, 0x1F, 0x9C, - 0x9C, 0x9A, 0x9A, 0x98, 0x97, 0x98, 0x00, 0x99, 0x99, 0x99, 0x98, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x6B, 0x68, 0x67, 0x6C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x00, 0x00, 0x00, 0x17, - 0x0F, 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x18, 0x1D, 0x33, 0x33, 0x0C, 0x35, 0x36, - 0x0F, 0x0F, 0x18, 0x11, 0x19, 0x2A, 0x2A, 0x04, 0x00, 0x07, 0x08, 0x00, 0x13, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x17, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, - 0x9E, 0x9F, 0x9E, 0x9D, 0x99, 0x1F, 0x9C, 0x99, 0x99, 0x95, 0x95, 0x95, 0x96, 0x93, 0x00, 0x9C, - 0x97, 0x9E, 0x99, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x64, 0x5B, 0x5F, 0x67, - 0x6C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1C, 0x00, 0x00, 0x00, 0x18, 0x0F, 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x08, 0x1E, 0x32, 0x33, 0x0C, 0x35, 0x07, 0x0F, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, 0x2A, 0x2D, - 0x00, 0x00, 0x00, 0x16, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x12, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9E, - 0x9E, 0x9E, 0x9E, 0x9C, 0x9E, 0x9C, 0x00, 0x9D, 0x9C, 0x9C, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x62, 0x5B, 0x5B, 0x65, 0x69, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x00, 0x1A, - 0x0F, 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1C, 0x1F, 0x33, 0x33, 0x0C, 0x35, 0x18, - 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, 0x04, 0x00, 0x00, 0x1B, 0x13, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x12, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, - 0x9F, 0x9F, 0x9E, 0x9F, 0x9C, 0x9A, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x9F, - 0x1F, 0x9D, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x60, 0x5B, 0x59, 0x61, - 0x68, 0x6C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x00, 0x08, 0x0F, 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1C, 0x00, 0x32, 0x33, 0x0C, 0x35, 0x1C, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, - 0x00, 0x00, 0x18, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x07, 0x0F, 0x12, 0x1A, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9B, - 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x99, 0x99, 0x99, 0x98, 0x98, 0x98, 0x98, 0x96, 0x96, 0x96, - 0x96, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, - 0x9E, 0x1F, 0x9C, 0x9F, 0x1F, 0x9E, 0x00, 0x1F, 0x9F, 0x9F, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x5B, 0x59, 0x58, 0x61, 0x66, 0x6B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1E, 0x00, 0x00, 0x00, - 0x0F, 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, 0x1F, 0x33, 0x33, 0x0C, 0x35, 0x08, - 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x19, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x0F, 0x12, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x96, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, - 0x1F, 0x9F, 0x9E, 0x00, 0x9C, 0x9F, 0x1F, 0x9F, 0x9F, 0x1F, 0x1F, 0x9E, 0x1F, 0x1F, 0x00, 0x1F, - 0x1F, 0x9E, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x5B, 0x58, 0x41, 0x61, - 0x64, 0x6A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x1C, 0x1A, 0x16, 0x12, 0x0F, 0x00, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1E, 0x1D, 0x18, 0x08, 0x08, 0x0C, 0x35, 0x36, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x11, 0x08, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x0F, 0x12, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, - 0x4C, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9D, 0x9C, 0x9C, 0x9C, 0x9B, 0x00, 0x1F, 0x9C, - 0x9D, 0x9A, 0x9C, 0x9C, 0x9C, 0x9A, 0x9C, 0x9A, 0x9C, 0x9C, 0x9A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x5B, 0x41, 0x0F, 0x61, 0x64, 0x6A, 0x6E, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x00, 0x00, - 0x00, 0x07, 0x0F, 0x0F, 0x12, 0x04, 0x04, 0x23, 0x20, 0x20, 0x0C, 0x0C, 0x23, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1B, 0x07, 0x07, 0x08, 0x08, 0x36, - 0x22, 0x00, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x11, 0x08, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x0F, 0x12, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, - 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4C, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1F, - 0x1F, 0x1F, 0x1F, 0x9F, 0x9C, 0x1F, 0x00, 0x9E, 0x99, 0x99, 0x9A, 0x99, 0x9C, 0x9B, 0x97, 0x1F, - 0x9D, 0x00, 0x1F, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x5B, 0x41, 0x42, 0x64, - 0x68, 0x6B, 0x6E, 0x17, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x07, 0x0F, 0x0F, 0x11, 0x07, 0x08, 0x00, 0x00, 0x04, - 0x04, 0x04, 0x23, 0x23, 0x0C, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x07, 0x07, 0x18, 0x18, 0x16, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x07, 0x08, 0x11, 0x12, 0x12, 0x0F, 0x07, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, - 0x4C, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, - 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x5B, 0x58, 0x41, 0x02, 0x68, 0x6B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x08, 0x08, 0x00, 0x1A, 0x17, 0x16, 0x15, 0x07, 0x16, 0x16, 0x17, 0x37, 0x23, 0x20, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, - 0x1B, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x08, 0x08, 0x07, - 0x00, 0x0C, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x96, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFC, - 0xFE, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, 0xF8, 0xF7, 0xF6, 0xFA, 0xF6, 0xF5, 0xF4, 0xF4, 0xF2, 0xF0, - 0xF3, 0xF4, 0xF7, 0xF7, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x5B, 0x59, 0x58, 0x68, - 0x69, 0x6C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x19, 0x0F, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x04, 0x20, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x07, 0x07, 0x00, 0x20, 0x20, 0x0C, 0x21, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, - 0x98, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFB, 0xFA, 0xFA, 0xFA, 0xF9, 0xF9, 0xF8, 0xF8, 0xF8, - 0xF8, 0xF7, 0xF7, 0xF6, 0xF5, 0xF5, 0xF4, 0xF2, 0xF2, 0xF4, 0xF5, 0xF8, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x60, 0x5B, 0x59, 0x69, 0x6A, 0x6D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x07, 0x0F, 0x07, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x04, - 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x08, 0x1A, - 0x18, 0x16, 0x07, 0x12, 0x11, 0x0F, 0x12, 0x07, 0x17, 0x19, 0x08, 0x04, 0x04, 0x04, 0x04, 0x04, - 0x1B, 0x14, 0x16, 0x04, 0x21, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, - 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, 0x98, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFB, - 0xF8, 0xF8, 0xF7, 0xF6, 0xF4, 0xF3, 0xF2, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF0, - 0xF0, 0xF1, 0xF4, 0xF8, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x62, 0x5B, 0x5B, 0x6A, - 0x6C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x15, 0x0F, 0x0F, 0x17, 0x19, 0x19, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x00, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x27, 0x0C, 0x00, 0x00, 0x1D, 0x08, 0x19, 0x17, 0x07, 0x11, 0x07, 0x17, - 0x08, 0x1D, 0x1F, 0x08, 0x08, 0x04, 0x04, 0x18, 0x13, 0x14, 0x14, 0x19, 0x04, 0x2A, 0x1D, 0x07, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, - 0x98, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xF9, 0xFC, 0xFB, 0xFB, 0xFA, 0xFA, 0xF9, 0xF9, - 0xF8, 0xF7, 0xF8, 0xF7, 0xF6, 0xF5, 0xF5, 0xF4, 0xF3, 0xF2, 0xF4, 0xF8, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x68, 0x61, 0x62, 0x6C, 0x6E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, - 0x0F, 0x0F, 0x07, 0x07, 0x07, 0x07, 0x1A, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x00, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x37, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x1B, 0x14, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x19, 0x2A, 0x2D, 0x08, 0x07, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, 0x98, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, - 0xFA, 0xFC, 0xFC, 0xFB, 0xFB, 0xFA, 0xFA, 0xF9, 0xF9, 0xF8, 0xF8, 0xF8, 0xF7, 0xF6, 0xF5, 0xF5, - 0xF4, 0xF3, 0xF2, 0xF8, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x6B, 0x68, 0x68, 0x6E, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x08, 0x08, 0x08, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, - 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x07, 0x1A, 0x1D, 0x1D, 0x1D, 0x1A, 0x07, 0x08, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x00, 0x2A, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x00, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x17, 0x0F, 0x10, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x2D, 0x2D, 0x1D, - 0x00, 0x07, 0x0C, 0x37, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, - 0x99, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xFB, 0xFD, 0xFC, 0xFC, 0xFB, 0xFB, 0xFA, 0xFA, - 0xF9, 0xF9, 0xF9, 0xF8, 0xF8, 0xF7, 0xF6, 0xF5, 0xF5, 0xF3, 0xF2, 0xF8, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x6E, 0x6A, 0x6C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1C, 0x1D, 0x1E, - 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x00, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x1A, 0x00, 0x2D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x27, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x1A, 0x2D, 0x1D, 0x08, 0x1B, 0x18, 0x37, 0x04, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x4E, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x4E, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, 0x99, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9E, 0x9E, - 0x9D, 0x9C, 0x9D, 0x99, 0x9B, 0x9A, 0x1F, 0x1F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9B, 0x9E, 0x9E, 0x00, - 0x9F, 0x9E, 0x9C, 0x9D, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x13, 0x18, 0x07, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x22, - 0x04, 0x13, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x08, 0x00, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x1A, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1F, 0x1F, 0x37, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x1D, 0x1D, - 0x1F, 0x08, 0x08, 0x08, 0x04, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x4B, 0x4B, 0x4C, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x4C, 0x4B, 0x4B, 0x9F, 0x9F, 0x9F, - 0x99, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9F, 0x9E, 0x9C, 0x9C, 0x9D, 0x9C, 0x99, 0x9A, 0x1F, 0x1F, - 0x1F, 0x1F, 0x9F, 0x9F, 0x9C, 0x9D, 0x9F, 0x00, 0x9F, 0x9D, 0x9D, 0x9D, 0x9B, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x17, 0x0F, 0x07, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x08, 0x13, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x1A, 0x1A, 0x17, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x33, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x1D, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x11, 0x1D, 0x1D, 0x1D, 0x1F, 0x08, 0x17, 0x13, 0x0F, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x4D, 0x4B, 0x4B, 0x4B, 0x4F, 0x9F, - 0x4F, 0x4B, 0x4B, 0x4B, 0x4C, 0x9F, 0x9F, 0x9F, 0x9A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1F, 0x1F, 0x1F, - 0x1F, 0x9F, 0x9F, 0x9C, 0x9C, 0x00, 0x9D, 0x9D, 0x1F, 0x9F, 0x9E, 0x96, 0x9D, 0x99, 0x9C, 0x9F, - 0x00, 0x1F, 0x9F, 0x9F, 0x1F, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x0F, 0x18, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x00, 0x0F, 0x07, - 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x00, 0x17, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x1A, 0x17, 0x0F, 0x07, 0x1D, 0x1D, - 0x1D, 0x12, 0x0F, 0x33, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, - 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x0F, 0x07, 0x1D, 0x1D, - 0x1D, 0x1F, 0x08, 0x13, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x9F, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4B, 0x4F, 0x9F, 0x9F, 0x9F, - 0x9A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9E, 0x9E, 0x9C, 0x9D, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, - 0x1F, 0x9D, 0x9B, 0x9D, 0x9D, 0x1F, 0x1F, 0x9F, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x18, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x00, 0x07, 0x08, 0x2F, 0x2E, 0x2C, 0x2A, 0x28, 0x04, 0x24, 0x23, - 0x20, 0x37, 0x35, 0x35, 0x0C, 0x0C, 0x33, 0x07, 0x07, 0x0F, 0x0F, 0x13, 0x1A, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x1A, 0x11, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x0F, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, 0x1D, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x12, 0x11, 0x1A, 0x1D, 0x1D, 0x1F, 0x00, 0x18, 0x13, 0x0F, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x9F, 0x4E, 0x4B, 0x4B, 0x4B, 0x4B, - 0x4B, 0x4B, 0x4B, 0x4E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1F, 0x9F, 0x9C, - 0x9D, 0x00, 0x9B, 0x00, 0x9E, 0x9F, 0x9E, 0x9F, 0x9E, 0x9D, 0x9B, 0x9D, 0x9A, 0x1F, 0x9C, 0x1F, - 0x1F, 0x1F, 0x9E, 0x9E, 0x9F, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, 0x1D, 0x1D, 0x1D, 0x1C, 0x1C, 0x1B, - 0x1B, 0x1B, 0x1B, 0x1A, 0x1A, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x0C, 0x0F, 0x08, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x07, 0x0F, 0x0C, 0x35, 0x0F, 0x0F, 0x07, 0x07, 0x07, 0x19, 0x19, 0x08, 0x08, - 0x08, 0x08, 0x19, 0x19, 0x33, 0x33, 0x33, 0x0C, 0x0C, 0x04, 0x14, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, - 0x1D, 0x08, 0x13, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x4E, 0x4C, 0x4B, 0x4B, 0x4B, 0x4C, 0x4E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9A, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1F, 0x1F, 0x1F, 0x9F, 0x00, 0x1F, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x9E, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x17, 0x1C, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x00, - 0x19, 0x15, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x11, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x07, 0x35, 0x0F, - 0x07, 0x08, 0x08, 0x19, 0x07, 0x07, 0x0F, 0x07, 0x07, 0x19, 0x08, 0x04, 0x04, 0x04, 0x04, 0x04, - 0x04, 0x08, 0x12, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9B, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9F, 0x9C, 0x9A, - 0x9C, 0x9C, 0x9A, 0x9A, 0x00, 0x1F, 0x9D, 0x9B, 0x9C, 0x9A, 0x9E, 0x9A, 0x9D, 0x9C, 0x9A, 0x9A, - 0x9A, 0x9A, 0x9C, 0x9B, 0x9C, 0x9A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x1D, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x19, 0x12, 0x0F, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x0C, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x07, 0x07, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x04, 0x0C, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x9B, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x1B, 0x1F, 0x1F, 0x9F, 0x9D, 0x9E, 0x9C, 0x9D, 0x9A, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x1E, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x0C, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x08, 0x08, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x04, - 0x04, 0x08, 0x04, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, - 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1F, 0x1F, 0x1F, 0x1F, - 0x9F, 0x1F, 0x9E, 0x9C, 0x1F, 0x1F, 0x9D, 0x9E, 0x9D, 0x9B, 0x9B, 0x9B, 0x9A, 0x9B, 0x9C, 0x97, - 0x00, 0x1F, 0x1F, 0x9C, 0x1F, 0x1F, 0x9E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x1E, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x2A, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x1A, 0x19, 0x17, 0x07, 0x12, 0x0F, - 0x0F, 0x12, 0x07, 0x0C, 0x0C, 0x0C, 0x04, 0x04, 0x08, 0x14, 0x14, 0x04, 0x0C, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x15, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x1D, 0x9E, 0x9E, 0x9B, 0x9B, 0x9B, 0x9B, 0x9C, 0x9B, 0x9B, 0x00, 0x9F, 0x9E, - 0x9F, 0x9F, 0x9D, 0x9F, 0x9F, 0x9F, 0x9C, 0x9F, 0x00, 0x9F, 0x9F, 0x9F, 0x9E, 0x9D, 0x9D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1F, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x1C, 0x2A, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x00, 0x0C, 0x00, 0x1C, - 0x19, 0x17, 0x07, 0x17, 0x19, 0x08, 0x1C, 0x1D, 0x1D, 0x1D, 0x0C, 0x0C, 0x08, 0x08, 0x08, 0x08, - 0x13, 0x14, 0x14, 0x07, 0x04, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, - 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9F, 0x1F, 0x9E, 0x9F, - 0x9E, 0x9F, 0x9D, 0x9B, 0x9D, 0x9F, 0x9F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9F, - 0x00, 0x9F, 0x9F, 0x9F, 0x9D, 0x9F, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1F, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x1E, 0x07, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x2C, 0x04, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x1F, 0x00, 0x00, 0x17, 0x13, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x0C, 0x0C, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, 0x16, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x9A, 0x9D, 0x9C, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x00, 0x9D, 0x9D, 0x9C, 0x9C, - 0x9C, 0x9C, 0x9C, 0x00, 0x9F, 0x9E, 0x9B, 0x9B, 0x00, 0x00, 0x1F, 0x9E, 0x9F, 0x1F, 0x9D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x1D, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2F, 0x00, 0x00, 0x1B, 0x07, - 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x1A, 0x2C, 0x0C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x18, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x0C, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x29, 0x29, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x16, - 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9A, 0x9F, 0x1F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9F, 0x00, 0x9F, 0x1F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9D, 0x00, 0x9F, 0x1F, 0x9F, 0x9F, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1D, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2E, 0x00, 0x00, 0x1E, 0x07, 0x0F, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x19, 0x1A, 0x1A, 0x0F, 0x0F, 0x1C, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1E, 0x00, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x17, 0x17, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1C, 0x9F, 0x9B, 0x9F, 0x9B, 0x9E, 0x9D, 0x9C, 0x9D, 0x9B, 0x9A, 0x9B, 0x00, 0x9D, - 0x9D, 0x9C, 0x9C, 0x9C, 0x9A, 0x9C, 0x00, 0x9F, 0x9D, 0x9F, 0x9B, 0x9F, 0x9F, 0x9D, 0x00, 0x9D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1D, 0x31, - 0x32, 0x33, 0x34, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1E, - 0x1D, 0x1D, 0x1C, 0x1C, 0x1C, 0x1B, 0x1B, 0x1B, 0x19, 0x19, 0x19, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x19, 0x1A, 0x0F, 0x0F, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1D, 0x1B, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x17, - 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1F, 0x9F, 0x9D, 0x9F, 0x9E, - 0x9B, 0x9B, 0x9D, 0x9D, 0x9C, 0x9D, 0x00, 0x1F, 0x9F, 0x9F, 0x9C, 0x9B, 0x9B, 0x9C, 0x00, 0x9F, - 0x9F, 0x9F, 0x9C, 0x9D, 0x9F, 0x9F, 0x00, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x08, 0x0F, 0x07, 0x17, - 0x18, 0x18, 0x08, 0x08, 0x04, 0x04, 0x04, 0x24, 0x21, 0x37, 0x35, 0x0C, 0x33, 0x32, 0x31, 0x31, - 0x30, 0x0F, 0x19, 0x17, 0x17, 0x18, 0x18, 0x19, 0x1B, 0x0F, 0x0F, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x0F, 0x0F, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x17, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x9A, 0x1F, 0x9F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9C, 0x9E, 0x9D, 0x00, 0x1F, - 0x9F, 0x9F, 0x9F, 0x9F, 0x9B, 0x9C, 0x00, 0x9F, 0x9F, 0x9E, 0x9F, 0x9F, 0x9F, 0x9B, 0x00, 0x9F, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x19, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x1B, 0x12, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, - 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9B, 0x00, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9C, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x07, 0x0F, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1B, 0x07, 0x18, 0x17, 0x17, 0x18, 0x18, 0x19, 0x1C, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x07, 0x08, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, - 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x12, 0x0F, 0x08, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x99, 0x9D, 0x9C, 0x9B, 0x9C, 0x9B, 0x9B, 0x9C, 0x00, 0x9D, 0x9A, 0x9A, 0x9C, 0x9A, - 0x9A, 0x9C, 0x9A, 0x9A, 0x9A, 0x9A, 0x00, 0x1F, 0x9F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00, 0x9F, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1D, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x07, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x07, 0x1B, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x00, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x08, 0x0C, 0x35, 0x0F, - 0x11, 0x15, 0x17, 0x19, 0x1C, 0x08, 0x08, 0x08, 0x1B, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x18, - 0x00, 0x1A, 0x17, 0x12, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9D, 0x9D, 0x9C, 0x9F, 0x9E, 0x9C, - 0x9C, 0x00, 0x1F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, 0x9D, 0x00, 0x9D, - 0x9D, 0x00, 0x9B, 0x9B, 0x9B, 0x9C, 0x9C, 0x9C, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1D, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x08, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1B, 0x17, - 0x08, 0x19, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x00, 0x13, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x08, 0x35, 0x11, 0x07, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x08, 0x08, 0x18, 0x13, 0x11, 0x12, 0x12, 0x13, 0x18, 0x08, 0x1C, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1C, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9D, 0x9B, 0x00, 0x9F, 0x9F, 0x9F, 0x9B, 0x9B, 0x9B, - 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x00, 0x1F, 0x1F, 0x9D, 0x9E, 0x9E, 0x9F, - 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1D, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x08, 0x1C, 0x1D, 0x1E, 0x1F, 0x1F, 0x00, - 0x1F, 0x1E, 0x1D, 0x1C, 0x08, 0x08, 0x19, 0x08, 0x19, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x1D, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x08, 0x1A, 0x08, 0x07, - 0x08, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1C, 0x08, 0x08, 0x18, 0x16, 0x12, 0x12, 0x13, - 0x13, 0x18, 0x08, 0x08, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9C, 0x9C, 0x9D, 0x9F, 0x9E, 0x9C, - 0x9B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x31, 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1D, 0x1D, 0x1C, 0x1B, 0x18, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, 0x18, 0x14, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x08, 0x08, 0x00, 0x08, 0x08, 0x08, 0x1A, 0x19, 0x19, 0x17, 0x07, 0x0F, 0x07, - 0x19, 0x1A, 0x08, 0x08, 0x08, 0x18, 0x12, 0x13, 0x13, 0x14, 0x18, 0x1F, 0x08, 0x18, 0x1C, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x9A, 0x9E, 0x1F, 0x9C, 0x9D, 0x9C, 0x9D, 0x9A, 0x99, 0x9B, 0x9A, 0x00, 0x1F, 0x1F, 0x9F, - 0x9F, 0x9E, 0x9E, 0x9F, 0x9E, 0x9B, 0x9E, 0x9E, 0x9A, 0x00, 0x9F, 0x9F, 0x9C, 0x9C, 0x9D, 0x9D, - 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x31, - 0x32, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x00, - 0x19, 0x15, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x19, - 0x13, 0x16, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1B, 0x0C, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x1C, 0x1C, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x1F, 0x1D, 0x18, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x9F, 0x9D, 0x1F, 0x9C, 0x9C, 0x9C, - 0x9E, 0x9D, 0x9D, 0x9C, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x9F, 0x9E, 0x9F, 0x9D, 0x9F, 0x9F, 0x9F, - 0x9C, 0x00, 0x1F, 0x9F, 0x9D, 0x9F, 0x9D, 0x9C, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x15, 0x0F, 0x11, 0x33, 0x34, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x19, 0x12, 0x0F, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x13, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x00, 0x17, 0x13, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x18, 0x07, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x1B, 0x1F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9E, 0x9A, 0x9F, 0x9A, 0x9A, 0x9C, 0x9F, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9D, 0x9C, 0x00, 0x1F, 0x9F, 0x9F, 0x9D, 0x9F, - 0x9B, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x07, - 0x13, 0x12, 0x0C, 0x0C, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x18, 0x0F, - 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x00, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x18, 0x0F, 0x10, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x07, 0x18, 0x0F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1E, 0x9F, 0x9F, 0x9F, 0x1F, 0x9F, 0x9F, - 0x9C, 0x9C, 0x9C, 0x9C, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x9F, 0x9E, 0x9D, 0x9C, 0x9B, - 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x9E, 0x9E, 0x9C, 0x9E, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x07, 0x14, 0x0C, 0x35, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x13, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1E, 0x1B, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, - 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x07, 0x0F, 0x12, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x1C, 0x1E, 0x1F, 0x9F, 0x1F, 0x1F, 0x9F, 0x9F, 0x1F, 0x9E, 0x9E, 0x9E, 0x00, 0x1F, 0x9D, 0x9F, - 0x00, 0x9D, 0x9C, 0x9C, 0x9D, 0x1F, 0x9E, 0x9F, 0x9C, 0x00, 0x00, 0x1F, 0x9F, 0x9F, 0x1F, 0x9E, - 0x9F, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1C, 0x07, 0x18, 0x35, 0x36, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x00, 0x07, - 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x18, 0x0F, 0x07, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1F, 0x1D, 0x19, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2D, 0x00, 0x00, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x12, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9B, 0x9E, 0x9E, 0x9D, 0x9C, 0x9D, 0x9D, 0x00, - 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x9F, 0x00, 0x9D, 0x1F, 0x9E, 0x9B, 0x9D, 0x1F, 0x1F, - 0x9E, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x1A, 0x36, 0x22, 0x24, - 0x26, 0x27, 0x2A, 0x2C, 0x00, 0x00, 0x1E, 0x07, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x17, 0x16, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x32, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x2F, - 0x00, 0x1E, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x07, 0x12, 0x12, 0x1A, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x9A, 0x1F, 0x1F, 0x9F, 0x9D, 0x9E, 0x9C, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x1F, 0x1F, - 0x00, 0x1F, 0x1F, 0x9F, 0x1F, 0x9F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x9E, 0x9E, 0x9C, 0x9C, - 0x9D, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x28, 0x22, 0x24, 0x26, 0x27, 0x2A, 0x2E, 0x00, 0x00, 0x1B, 0x07, - 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, 0x07, 0x16, 0x16, 0x17, 0x17, 0x13, 0x0F, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x07, 0x08, 0x32, 0x33, 0x0C, 0x35, 0x36, - 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x2B, 0x00, 0x00, 0x1B, 0x07, 0x0F, 0x11, 0x12, 0x12, 0x13, - 0x13, 0x14, 0x14, 0x07, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1F, 0x1F, 0x1F, 0x9E, 0x9D, 0x9C, 0x00, 0x9C, - 0x9E, 0x00, 0x9E, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x1F, 0x9F, 0x1F, 0x1F, 0x9E, 0x9C, 0x9E, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x1E, 0x22, 0x24, - 0x26, 0x27, 0x2E, 0x00, 0x00, 0x1B, 0x07, 0x0F, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x14, 0x07, - 0x07, 0x16, 0x16, 0x17, 0x14, 0x0F, 0x07, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x07, 0x08, 0x33, 0x0C, 0x35, 0x36, 0x23, 0x24, 0x25, 0x04, 0x28, 0x29, 0x00, 0x00, - 0x1B, 0x07, 0x0F, 0x0F, 0x11, 0x12, 0x12, 0x13, 0x13, 0x14, 0x14, 0x12, 0x0F, 0x07, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, - 0x1E, 0x9F, 0x9F, 0x9D, 0x9D, 0x9C, 0x00, 0x9E, 0x9C, 0x00, 0x1F, 0x9F, 0x1F, 0x9F, 0x9F, 0x1F, - 0x1F, 0x9F, 0x9E, 0x9C, 0x9E, 0x9C, 0x00, 0x9E, 0x1F, 0x9D, 0x00, 0x1F, 0x1F, 0x9F, 0x9F, 0x9E, - 0x1F, 0x9E, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1E, 0x1D, 0x1C, 0x1B, 0x08, 0x1A, 0x19, 0x18, 0x07, 0x17, 0x14, 0x0F, 0x13, 0x1A, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x08, 0x0C, 0x35, 0x0F, - 0x12, 0x07, 0x18, 0x1A, 0x08, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x0C, 0x0C, 0x0C, 0x04, - 0x04, 0x07, 0x14, 0x12, 0x0F, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1E, 0x1F, 0x1F, 0x1F, 0x9F, 0x1F, 0x00, 0x1F, - 0x9D, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, 0x1F, 0x1F, 0x1F, 0x9E, 0x1F, 0x9D, 0x00, 0x9F, - 0x1F, 0x9F, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1C, 0x1A, - 0x18, 0x17, 0x07, 0x12, 0x0F, 0x07, 0x17, 0x18, 0x1A, 0x08, 0x08, 0x08, 0x1A, 0x18, 0x07, 0x14, - 0x12, 0x0F, 0x0F, 0x0F, 0x13, 0x1A, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x18, 0x08, 0x35, 0x07, 0x08, 0x1B, 0x1A, 0x18, 0x17, 0x17, 0x07, 0x12, - 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x33, 0x0C, 0x04, 0x14, 0x0F, 0x12, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, - 0x9F, 0x9F, 0x9D, 0x9B, 0x9B, 0x9C, 0x9B, 0x9B, 0x9B, 0x9A, 0x00, 0x1F, 0x9D, 0x9D, 0x9C, 0x9A, - 0x9A, 0x9B, 0x9A, 0x9D, 0x9B, 0x9C, 0x9D, 0x9C, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x99, 0x9A, - 0x9C, 0x9A, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1A, 0x08, 0x18, - 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1A, 0x1A, 0x12, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x1F, 0x9E, 0x9A, 0x9C, 0x9F, 0x9D, 0x9D, 0x9C, - 0x9B, 0x9B, 0x00, 0x00, 0x9F, 0x9F, 0x1F, 0x9F, 0x9D, 0x9E, 0x9E, 0x9D, 0x9D, 0x9F, 0x9F, 0x9E, - 0x9D, 0x9D, 0x9D, 0x9E, 0x9D, 0x9A, 0x9A, 0x9B, 0x99, 0x9A, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x08, 0x1B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1F, - 0x1F, 0x9F, 0x9F, 0x1F, 0x9E, 0x9D, 0x9C, 0x9D, 0x9C, 0x9A, 0x00, 0x00, 0x1F, 0x1F, 0x9F, 0x9F, - 0x9E, 0x9F, 0x1F, 0x1F, 0x9F, 0x1F, 0x9E, 0x9E, 0x9F, 0x9F, 0x9F, 0x1F, 0x9F, 0x9D, 0x9E, 0x9C, - 0x9B, 0x9C, 0x9A, 0x9E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1F, 0x1F, 0x9F, 0x9F, 0x9F, 0x9E, 0x9E, 0x9C, 0x9E, - 0x9D, 0x9A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x29, 0x29, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1E, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9D, 0x1F, 0x9D, 0x9B, 0x1F, 0x1F, 0x00, 0x9D, 0x9D, 0x9B, - 0x99, 0x9B, 0x99, 0x9B, 0x99, 0x9B, 0x9B, 0x99, 0x99, 0x97, 0x99, 0x00, 0x9F, 0x9E, 0x9D, 0x00, - 0x1F, 0x1F, 0x9B, 0x9B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x9E, 0x9E, 0x9E, 0x9E, 0x9D, 0x9C, 0x9C, 0x9C, 0x9B, 0x9A, 0x9C, - 0x9B, 0x9B, 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x2B, 0x2B, 0x2B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x9B, 0x9D, - 0x9C, 0x9B, 0x9A, 0x9C, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9C, 0x9D, 0x00, 0x9D, 0x9F, 0x9E, - 0x9D, 0x9E, 0x9D, 0x9E, 0x9F, 0x9E, 0x9E, 0x9E, 0x9D, 0x9D, 0x9B, 0x00, 0x9D, 0x9E, 0x9F, 0x9D, - 0x9D, 0x9E, 0x9D, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x29, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x9E, 0x9E, 0x1F, 0x9C, 0x9D, 0x9C, 0x9C, 0x9D, 0x9A, 0x99, - 0x9C, 0x9B, 0x9A, 0x00, 0x1F, 0x9F, 0x1F, 0x9F, 0x9F, 0x9E, 0x9F, 0x9B, 0x9F, 0x9E, 0x9B, 0x9C, - 0x9E, 0x9E, 0x9A, 0x00, 0x1F, 0x1F, 0x9F, 0x9C, 0x9C, 0x9C, 0x9D, 0x9D, 0x9C, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1F, 0x9D, - 0x9C, 0x9F, 0x9F, 0x9E, 0x99, 0x9A, 0x9A, 0x9C, 0x9D, 0x9B, 0x9B, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, - 0x1F, 0x9F, 0x9D, 0x9E, 0x9F, 0x9F, 0x9D, 0x9F, 0x9E, 0x9D, 0x9E, 0x00, 0x9F, 0x9F, 0x9E, 0x9F, - 0x9D, 0x9C, 0x9A, 0x9D, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x2B, 0x2B, 0x2B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1F, 0x9F, 0x1F, 0x1F, 0x9D, 0x9D, 0x9E, 0x9E, 0x9C, 0x9A, - 0x99, 0x9C, 0x9C, 0x9F, 0x00, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x9F, 0x9F, 0x9F, - 0x9F, 0x9F, 0x9D, 0x00, 0x1F, 0x1F, 0x9F, 0x9F, 0x9D, 0x9F, 0x9B, 0x9B, 0x9C, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1F, 0x9F, - 0x1F, 0x9F, 0x1F, 0x9E, 0x9C, 0x9F, 0x9C, 0x9C, 0x9C, 0x9A, 0x9C, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x9F, 0x9F, 0x1F, - 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1E, 0x9F, 0x9F, 0x9F, 0x9F, 0x1F, 0x9F, 0x9D, 0x9D, 0x1F, - 0x9F, 0x9E, 0x9B, 0x00, 0x9E, 0x9D, 0x9F, 0x1F, 0x00, 0x9F, 0x9F, 0x9E, 0x9E, 0x9F, 0x9C, 0x9B, - 0x9B, 0x9D, 0x9F, 0x00, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, 0x9E, 0x9F, 0x9F, 0x9C, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1E, 0x1F, 0x1F, - 0x9F, 0x1F, 0x1F, 0x9F, 0x9F, 0x1F, 0x1F, 0x9E, 0x9C, 0x9F, 0x9D, 0x00, 0x9F, 0x9F, 0x9E, 0x9D, - 0x00, 0x9F, 0x9D, 0x9C, 0x9B, 0x9D, 0x9E, 0x9D, 0x9B, 0x9B, 0x9D, 0x00, 0x00, 0x1F, 0x1F, 0x9F, - 0x1F, 0x9F, 0x1F, 0x9F, 0x9F, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x2B, 0x2B, 0x2B, 0x2B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x9E, 0x00, 0x1F, 0x9C, 0x9C, 0x9D, 0x9F, 0x1F, 0x1F, - 0x9F, 0x9E, 0x9C, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x9F, 0x1F, 0x9F, 0x9E, 0x9F, 0x9E, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x9E, 0x9E, 0x9E, - 0x9D, 0x9C, 0x9D, 0x9D, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x9F, - 0x00, 0x9D, 0x1F, 0x9E, 0x9D, 0x99, 0x9D, 0x1F, 0x1F, 0x1F, 0x9E, 0x00, 0x00, 0x1F, 0x00, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x29, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1F, 0x9F, 0x9F, 0x9D, 0x9C, 0x9E, 0x9E, 0x00, 0x00, 0x1F, 0x1F, - 0x9D, 0x9B, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x1F, 0x9F, 0x1F, 0x9E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x00, 0x1F, 0x00, 0x00, 0x9E, 0x9D, 0x9D, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x9C, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1A, 0x1D, 0x1F, 0x9F, 0x1F, - 0x9F, 0x9F, 0x9C, 0x9D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x9F, 0x9F, - 0x1F, 0x9F, 0x9E, 0x9E, 0x9C, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x1A, 0x1D, 0x1F, 0x9F, 0x9F, 0x9C, 0x9C, 0x9E, 0x9C, 0x9E, 0x9B, 0x9C, 0x00, - 0x1F, 0x9E, 0x9F, 0x9F, 0x9E, 0x9D, 0x9F, 0x9E, 0x9E, 0x9D, 0x9B, 0x9B, 0x9D, 0x9C, 0x9A, 0x00, - 0x9C, 0x9E, 0x9D, 0x1F, 0x00, 0x1F, 0x1F, 0x9E, 0x9E, 0x9C, 0x9E, 0x1F, 0x9F, 0x9C, 0x9C, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x29, 0x29, 0x29, 0x29, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1E, 0x1F, 0x1F, 0x9F, - 0x9D, 0x9D, 0x9C, 0x9D, 0x9F, 0x9E, 0x9C, 0x00, 0x1F, 0x9F, 0x9F, 0x1F, 0x9F, 0x9F, 0x1F, 0x1F, - 0x1F, 0x9F, 0x9E, 0x9E, 0x9E, 0x9E, 0x9C, 0x00, 0x9E, 0x9F, 0x9F, 0x9D, 0x00, 0x1F, 0x1F, 0x1F, - 0x9F, 0x9F, 0x9E, 0x1F, 0x9F, 0x9E, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x19, 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x1C, 0x1E, 0x1F, 0x9F, 0x1F, 0x1F, 0x9F, 0x1F, 0x9E, 0x1F, 0x1F, 0x9D, 0x00, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9D, 0x00, - 0x9F, 0x1F, 0x9E, 0x9F, 0x00, 0x1F, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9E, 0x9E, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x29, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x9B, 0x9E, 0x9C, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, 0x9A, - 0x9A, 0x00, 0x9F, 0x9C, 0x9B, 0x9A, 0x9C, 0x9A, 0x9A, 0x9C, 0x9D, 0x9D, 0x9B, 0x9A, 0x9D, 0x9D, - 0x9C, 0x9A, 0x9D, 0x9A, 0x9A, 0x9A, 0x9B, 0x9B, 0x9B, 0x9B, 0x9B, 0x9A, 0x9A, 0x9A, 0x9C, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x9A, 0x1F, 0x9F, 0x9C, 0x9C, - 0x9A, 0x9C, 0x9C, 0x9C, 0x9B, 0x9A, 0x9B, 0x9A, 0x9A, 0x00, 0x1F, 0x9F, 0x9D, 0x9D, 0x9B, 0x9C, - 0x9C, 0x9A, 0x9C, 0x9E, 0x9A, 0x9A, 0x9D, 0x9A, 0x9C, 0x9B, 0x9B, 0x9A, 0x9C, 0x9A, 0x9A, 0x9A, - 0x9A, 0x9B, 0x9B, 0x99, 0x9C, 0x9A, 0x9C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1B, 0x1F, 0x9F, 0x1F, 0x9D, 0x9F, 0x9F, 0x9E, 0x9B, 0x9D, 0x9C, 0x9A, 0x9C, 0x9A, - 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, 0x9D, 0x9D, 0x9F, 0x1F, 0x9F, 0x9F, 0x9E, 0x9F, 0x1F, - 0x9F, 0x9E, 0x9E, 0x9D, 0x9D, 0x9E, 0x9E, 0x9D, 0x9E, 0x9C, 0x9C, 0x9C, 0x9C, 0x9B, 0x9A, 0x9C, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0x1F, 0x9F, 0x9F, 0x9F, 0x9F, - 0x1F, 0x9F, 0x9D, 0x9B, 0x9C, 0x9D, 0x9C, 0x9A, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x9F, 0x1F, 0x9E, - 0x9E, 0x9F, 0x1F, 0x1F, 0x9F, 0x9F, 0x1F, 0x9E, 0x9E, 0x9F, 0x1F, 0x9F, 0x9F, 0x1F, 0x9F, 0x9E, - 0x9D, 0x9D, 0x9C, 0x9B, 0x9C, 0x9D, 0x9A, 0x9E, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1C, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9F, 0x9B, 0x9E, 0x9D, 0x9C, 0x9A, - 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, 0x1F, 0x9F, 0x1F, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1D, 0x1F, 0x1F, 0x1F, 0x9F, 0x9F, - 0x9F, 0x9D, 0x9E, 0x9F, 0x9C, 0x9E, 0x9D, 0x9A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1C, 0x1E, 0x1F, 0x1F, 0x9F, 0x1F, 0x1F, 0x1F, 0x9D, 0x9D, 0x9E, 0x9D, 0x9A, 0x9B, - 0x00, 0x1F, 0x1F, 0x00, 0x9B, 0x9B, 0x9B, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, - 0x99, 0x99, 0x99, 0x99, 0x99, 0x00, 0x9E, 0x9C, 0x9C, 0x9B, 0x00, 0x9F, 0x9E, 0x1F, 0x9B, 0x9B, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1C, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F, 0x9F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x9E, 0x9E, 0x9C, 0x1F, 0x1F, 0x1F, 0x9F, 0x9D, 0x9D, 0x9D, 0x9D, - 0x9D, 0x9B, 0x9D, 0x9B, 0x9B, 0x9B, 0x9A, 0x9D, 0x9B, 0x99, 0x9B, 0x97, 0x9A, 0x00, 0x1F, 0x1F, - 0x1F, 0x9E, 0x9C, 0x1F, 0x1F, 0x1F, 0x1F, 0x9E, 0x9D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1B, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, - 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, - 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, - 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0xFD, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1B, 0xFD, 0xFC, 0xFB, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, - 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, - 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, - 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xFC, 0x1D, 0x7E, 0xFA, 0xFA, - 0xF9, 0xFA, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, 0xF9, 0xF8, 0xF8, 0xF8, 0xF8, 0xF7, 0xF8, 0xF7, 0xF7, - 0xF7, 0x1D, 0x7D, 0xF6, 0xF6, 0xF5, 0xF5, 0xF5, 0xF4, 0xF5, 0xF4, 0xF3, 0xF3, 0xF2, 0xF1, 0xF0, - 0xF3, 0xF3, 0xF4, 0xF4, 0xF5, 0xF7, 0x1D, 0x7C, 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1B, 0xFD, 0xFC, 0x7E, 0xF7, 0xFA, 0xFA, 0xFA, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, - 0xF8, 0xF8, 0xF8, 0xF7, 0xF8, 0xF7, 0xF7, 0xF7, 0xF6, 0x7D, 0xF0, 0xF6, 0xF6, 0xF6, 0xF5, 0xF5, - 0xF4, 0xF4, 0xF4, 0xF4, 0xF3, 0xF2, 0xF1, 0xF1, 0xF3, 0xF3, 0xF4, 0xF4, 0xF4, 0xF6, 0x7C, 0xF2, - 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFD, 0xFB, 0xFA, 0xFA, 0xFB, 0xFA, - 0xFA, 0xFA, 0xFA, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, 0xF8, 0xF8, 0xF7, 0xF8, 0xF8, 0xF7, - 0xF7, 0xF6, 0xF7, 0xF6, 0xF6, 0xF6, 0xF5, 0xF5, 0xF5, 0xF4, 0xF5, 0xF4, 0xF3, 0xF2, 0xF2, 0xF1, - 0xF2, 0xF3, 0xF3, 0xF4, 0xF4, 0xF5, 0xF5, 0xF8, 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1B, 0xFD, 0xFB, 0xFB, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xF9, 0xFA, 0xF9, 0xF9, 0xF9, 0xF9, - 0xF8, 0xF9, 0xF8, 0xF8, 0xF8, 0xF8, 0xF7, 0xF8, 0xF7, 0xF7, 0xF6, 0xF7, 0xF6, 0xF6, 0xF6, 0xF5, - 0xF5, 0xF5, 0xF4, 0xF5, 0xF4, 0xF3, 0xF2, 0xF2, 0xF2, 0xF3, 0xF3, 0xF4, 0xF4, 0xF5, 0xF5, 0xF8, - 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFE, 0xFB, 0xFB, 0xF8, 0xF8, 0xF8, - 0xF7, 0xF7, 0xF6, 0xF6, 0xF6, 0xF5, 0xF4, 0xF4, 0xF3, 0xF2, 0xF2, 0xF2, 0xF1, 0xF1, 0xF1, 0xF1, - 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF1, 0xF0, 0xF0, 0xF0, - 0xF0, 0xF0, 0xF0, 0x7B, 0x7D, 0xF4, 0xF5, 0xF8, 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1B, 0xFE, 0xFC, 0xFC, 0xF9, 0xF8, 0xFB, 0xFA, 0xFB, 0xFA, 0xFA, 0xFA, 0xFA, 0xF9, 0xFA, - 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, 0xF9, 0xF8, 0xF8, 0xF7, 0xF8, 0xF7, 0xF7, 0xF6, 0xF7, 0xF6, 0xF6, - 0xF5, 0xF5, 0xF5, 0xF4, 0xF5, 0xF4, 0xF3, 0xF3, 0xF2, 0xF1, 0xF2, 0x7B, 0x7D, 0xF4, 0xF5, 0xF8, - 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFE, 0xFC, 0xFC, 0xF9, 0xF8, 0xFB, - 0xFB, 0xFB, 0xFA, 0xFB, 0xFA, 0xFA, 0xFA, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, 0xF8, 0xF8, - 0xF8, 0xF7, 0xF8, 0xF7, 0xF7, 0xF6, 0xF7, 0xF6, 0xF6, 0xF5, 0xF5, 0xF5, 0xF4, 0xF4, 0xF4, 0xF3, - 0xF2, 0xF1, 0xF2, 0x7C, 0x7E, 0xF4, 0xF5, 0xF8, 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x1B, 0xFE, 0xFC, 0xFC, 0xFA, 0xF9, 0xFB, 0xFC, 0xFB, 0xFB, 0xFB, 0xFA, 0xFA, 0xFA, 0xFA, - 0xFA, 0xFA, 0xF9, 0xF9, 0xF9, 0xF9, 0xF8, 0xF9, 0xF8, 0xF8, 0xF8, 0xF7, 0xF7, 0xF7, 0xF7, 0xF7, - 0xF6, 0xF6, 0xF5, 0xF5, 0xF5, 0xF4, 0xF4, 0xF4, 0xF3, 0xF3, 0xF2, 0x7C, 0x7E, 0xF4, 0xF4, 0xF8, - 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x1B, 0xFE, 0xFD, 0xFD, 0xFA, 0xFA, 0xFC, - 0xFB, 0xFC, 0xFB, 0xFB, 0xFB, 0xFB, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xFA, 0xF9, 0xF9, 0xF9, 0xF8, - 0xF9, 0xF8, 0xF8, 0xF8, 0xF8, 0xF7, 0xF7, 0xF6, 0xF7, 0xF6, 0xF6, 0xF5, 0xF5, 0xF5, 0xF4, 0xF4, - 0xF3, 0xF3, 0xF3, 0x7D, 0x7E, 0xF3, 0xF4, 0xF8, 0xFB, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, - 0x19, 0x19, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, - 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D -}; diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h deleted file mode 100644 index 6c0a15f..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h +++ /dev/null @@ -1,9 +0,0 @@ -/* Generated by bin2c, do not edit manually */ -#ifndef __wolf3d_vgagraph_chunk87_h_included -#define __wolf3d_vgagraph_chunk87_h_included - -/* Contents of file chunk87.bin */ -#define wolf3d_vgagraph_chunk87_size 64000 -extern const unsigned char wolf3d_vgagraph_chunk87[64000]; - -#endif /* __wolf3d_vgagraph_chunk87_h_included */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c deleted file mode 100644 index 9f95a2a..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Endpoints to be used for USBD2. - */ -#define USBD2_DATA_REQUEST_EP 1 -#define USBD2_DATA_AVAILABLE_EP 1 -#define USBD2_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD2, - USBD2_DATA_REQUEST_EP, - USBD2_DATA_AVAILABLE_EP, - USBD2_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h deleted file mode 100644 index 2ffaa17..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c deleted file mode 100644 index ef84a1f..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c +++ /dev/null @@ -1,277 +0,0 @@ -#include -#include -#include - -const ltdc_color_t wolf3d_palette[256] __attribute__((aligned(4))) = { - 0xFF000000, /* 0x00 */ - 0xFF0000A8, /* 0x01 */ - 0xFF00A800, /* 0x02 */ - 0xFF00A8A8, /* 0x03 */ - 0xFFA80000, /* 0x04 */ - 0xFFA800A8, /* 0x05 */ - 0xFFA85400, /* 0x06 */ - 0xFFA8A8A8, /* 0x07 */ - 0xFF545454, /* 0x08 */ - 0xFF5454FC, /* 0x09 */ - 0xFF54FC54, /* 0x0A */ - 0xFF54FCFC, /* 0x0B */ - 0xFFFC5454, /* 0x0C */ - 0xFFFC54FC, /* 0x0D */ - 0xFFFCFC54, /* 0x0E */ - 0xFFFCFCFC, /* 0x0F */ - 0xFFECECEC, /* 0x10 */ - - 0xFFDCDCDC, /* 0x11 */ - 0xFFD0D0D0, /* 0x12 */ - 0xFFC0C0C0, /* 0x13 */ - 0xFFB4B4B4, /* 0x14 */ - 0xFFA8A8A8, /* 0x15 */ - 0xFF989898, /* 0x16 */ - 0xFF8C8C8C, /* 0x17 */ - 0xFF7C7C7C, /* 0x18 */ - 0xFF707070, /* 0x19 */ - 0xFF646464, /* 0x1A */ - 0xFF545454, /* 0x1B */ - 0xFF484848, /* 0x1C */ - 0xFF383838, /* 0x1D */ - 0xFF2C2C2C, /* 0x1E */ - 0xFF202020, /* 0x1F */ - 0xFFFC0000, /* 0x20 */ - - 0xFFEC0000, /* 0x21 */ - 0xFFE00000, /* 0x22 */ - 0xFFD40000, /* 0x23 */ - 0xFFC80000, /* 0x24 */ - 0xFFBC0000, /* 0x25 */ - 0xFFB00000, /* 0x26 */ - 0xFFA40000, /* 0x27 */ - 0xFF980000, /* 0x28 */ - 0xFF880000, /* 0x29 */ - 0xFF7C0000, /* 0x2A */ - 0xFF700000, /* 0x2B */ - 0xFF640000, /* 0x2C */ - 0xFF580000, /* 0x2D */ - 0xFF4C0000, /* 0x2E */ - 0xFF400000, /* 0x2F */ - 0xFFFCD8D8, /* 0x30 */ - - 0xFFFCB8B8, /* 0x31 */ - 0xFFFC9C9C, /* 0x32 */ - 0xFFFC7C7C, /* 0x33 */ - 0xFFFC5C5C, /* 0x34 */ - 0xFFFC4040, /* 0x35 */ - 0xFFFC2020, /* 0x36 */ - 0xFFFC0000, /* 0x37 */ - 0xFFFCA85C, /* 0x38 */ - 0xFFFC9840, /* 0x39 */ - 0xFFFC8820, /* 0x3A */ - 0xFFFC7800, /* 0x3B */ - 0xFFE46C00, /* 0x3C */ - 0xFFCC6000, /* 0x3D */ - 0xFFB45400, /* 0x3E */ - 0xFF9C4C00, /* 0x3F */ - 0xFFFCFCD8, /* 0x40 */ - - 0xFFFCFCB8, /* 0x41 */ - 0xFFFCFC9C, /* 0x42 */ - 0xFFFCFC7C, /* 0x43 */ - 0xFFFCF85C, /* 0x44 */ - 0xFFFCF440, /* 0x45 */ - 0xFFFCF420, /* 0x46 */ - 0xFFFCF400, /* 0x47 */ - 0xFFE4D800, /* 0x48 */ - 0xFFCCC400, /* 0x49 */ - 0xFFB4AC00, /* 0x4A */ - 0xFF9C9C00, /* 0x4B */ - 0xFF848400, /* 0x4C */ - 0xFF706C00, /* 0x4D */ - 0xFF585400, /* 0x4E */ - 0xFF404000, /* 0x4F */ - 0xFFD0FC5C, /* 0x50 */ - - 0xFFC4FC40, /* 0x51 */ - 0xFFB4FC20, /* 0x52 */ - 0xFFA0FC00, /* 0x53 */ - 0xFF90E400, /* 0x54 */ - 0xFF80CC00, /* 0x55 */ - 0xFF74B400, /* 0x56 */ - 0xFF609C00, /* 0x57 */ - 0xFFD8FCD8, /* 0x58 */ - 0xFFBCFCB8, /* 0x59 */ - 0xFF9CFC9C, /* 0x5A */ - 0xFF80FC7C, /* 0x5B */ - 0xFF60FC5C, /* 0x5C */ - 0xFF40FC40, /* 0x5D */ - 0xFF20FC20, /* 0x5E */ - 0xFF00FC00, /* 0x5F */ - 0xFF00FC00, /* 0x60 */ - - 0xFF00EC00, /* 0x61 */ - 0xFF00E000, /* 0x62 */ - 0xFF00D400, /* 0x63 */ - 0xFF04C800, /* 0x64 */ - 0xFF04BC00, /* 0x65 */ - 0xFF04B000, /* 0x66 */ - 0xFF04A400, /* 0x67 */ - 0xFF049800, /* 0x68 */ - 0xFF048800, /* 0x69 */ - 0xFF047C00, /* 0x6A */ - 0xFF047000, /* 0x6B */ - 0xFF046400, /* 0x6C */ - 0xFF045800, /* 0x6D */ - 0xFF044C00, /* 0x6E */ - 0xFF044000, /* 0x6F */ - 0xFFD8FCFC, /* 0x70 */ - - 0xFFB8FCFC, /* 0x71 */ - 0xFF9CFCFC, /* 0x72 */ - 0xFF7CFCF8, /* 0x73 */ - 0xFF5CFCFC, /* 0x74 */ - 0xFF40FCFC, /* 0x75 */ - 0xFF20FCFC, /* 0x76 */ - 0xFF00FCFC, /* 0x77 */ - 0xFF00E4E4, /* 0x78 */ - 0xFF00CCCC, /* 0x79 */ - 0xFF00B4B4, /* 0x7A */ - 0xFF009C9C, /* 0x7B */ - 0xFF008484, /* 0x7C */ - 0xFF007070, /* 0x7D */ - 0xFF005858, /* 0x7E */ - 0xFF004040, /* 0x7F */ - 0xFF5CBCFC, /* 0x80 */ - - 0xFF40B0FC, /* 0x81 */ - 0xFF20A8FC, /* 0x82 */ - 0xFF009CFC, /* 0x83 */ - 0xFF008CE4, /* 0x84 */ - 0xFF007CCC, /* 0x85 */ - 0xFF006CB4, /* 0x86 */ - 0xFF005C9C, /* 0x87 */ - 0xFFD8D8FC, /* 0x88 */ - 0xFFB8BCFC, /* 0x89 */ - 0xFF9C9CFC, /* 0x8A */ - 0xFF7C80FC, /* 0x8B */ - 0xFF5C60FC, /* 0x8C */ - 0xFF4040FC, /* 0x8D */ - 0xFF2024FC, /* 0x8E */ - 0xFF0004FC, /* 0x8F */ - 0xFF0000FC, /* 0x90 */ - - 0xFF0000EC, /* 0x91 */ - 0xFF0000E0, /* 0x92 */ - 0xFF0000D4, /* 0x93 */ - 0xFF0000C8, /* 0x94 */ - 0xFF0000BC, /* 0x95 */ - 0xFF0000B0, /* 0x96 */ - 0xFF0000A4, /* 0x97 */ - 0xFF000098, /* 0x98 */ - 0xFF000088, /* 0x99 */ - 0xFF00007C, /* 0x9A */ - 0xFF000070, /* 0x9B */ - 0xFF000064, /* 0x9C */ - 0xFF000058, /* 0x9D */ - 0xFF00004C, /* 0x9E */ - 0xFF000040, /* 0x9F */ - 0xFF282828, /* 0xA0 */ - - 0xFFFCE034, /* 0xA1 */ - 0xFFFCD424, /* 0xA2 */ - 0xFFFCCC18, /* 0xA3 */ - 0xFFFCC008, /* 0xA4 */ - 0xFFFCB400, /* 0xA5 */ - 0xFFB420FC, /* 0xA6 */ - 0xFFA800FC, /* 0xA7 */ - 0xFF9800E4, /* 0xA8 */ - 0xFF8000CC, /* 0xA9 */ - 0xFF7400B4, /* 0xAA */ - 0xFF60009C, /* 0xAB */ - 0xFF500084, /* 0xAC */ - 0xFF440070, /* 0xAD */ - 0xFF340058, /* 0xAE */ - 0xFF280040, /* 0xAF */ - 0xFFFCD8FC, /* 0xB0 */ - - 0xFFFCB8FC, /* 0xB1 */ - 0xFFFC9CFC, /* 0xB2 */ - 0xFFFC7CFC, /* 0xB3 */ - 0xFFFC5CFC, /* 0xB4 */ - 0xFFFC40FC, /* 0xB5 */ - 0xFFFC20FC, /* 0xB6 */ - 0xFFFC00FC, /* 0xB7 */ - 0xFFE000E4, /* 0xB8 */ - 0xFFC800CC, /* 0xB9 */ - 0xFFB400B4, /* 0xBA */ - 0xFF9C009C, /* 0xBB */ - 0xFF840084, /* 0xBC */ - 0xFF6C0070, /* 0xBD */ - 0xFF580058, /* 0xBE */ - 0xFF400040, /* 0xBF */ - 0xFFFCE8DC, /* 0xC0 */ - - 0xFFFCE0D0, /* 0xC1 */ - 0xFFFCD8C4, /* 0xC2 */ - 0xFFFCD4BC, /* 0xC3 */ - 0xFFFCCCB0, /* 0xC4 */ - 0xFFFCC4A4, /* 0xC5 */ - 0xFFFCBC9C, /* 0xC6 */ - 0xFFFCB890, /* 0xC7 */ - 0xFFFCB080, /* 0xC8 */ - 0xFFFCA470, /* 0xC9 */ - 0xFFFC9C60, /* 0xCA */ - 0xFFF0945C, /* 0xCB */ - 0xFFE88C58, /* 0xCC */ - 0xFFDC8854, /* 0xCD */ - 0xFFD08050, /* 0xCE */ - 0xFFC87C4C, /* 0xCF */ - 0xFFBC7848, /* 0xD0 */ - - 0xFFB47044, /* 0xD1 */ - 0xFFA86840, /* 0xD2 */ - 0xFFA0643C, /* 0xD3 */ - 0xFF9C6038, /* 0xD4 */ - 0xFF905C34, /* 0xD5 */ - 0xFF885830, /* 0xD6 */ - 0xFF80502C, /* 0xD7 */ - 0xFF744C28, /* 0xD8 */ - 0xFF6C4824, /* 0xD9 */ - 0xFF5C4020, /* 0xDA */ - 0xFF543C1C, /* 0xDB */ - 0xFF483818, /* 0xDC */ - 0xFF403018, /* 0xDD */ - 0xFF382C14, /* 0xDE */ - 0xFF28200C, /* 0xDF */ - 0xFF600064, /* 0xE0 */ - - 0xFF006464, /* 0xE1 */ - 0xFF006060, /* 0xE2 */ - 0xFF00001C, /* 0xE3 */ - 0xFF00002C, /* 0xE4 */ - 0xFF302410, /* 0xE5 */ - 0xFF480048, /* 0xE6 */ - 0xFF500050, /* 0xE7 */ - 0xFF000034, /* 0xE8 */ - 0xFF1C1C1C, /* 0xE9 */ - 0xFF4C4C4C, /* 0xEA */ - 0xFF5C5C5C, /* 0xEB */ - 0xFF404040, /* 0xEC */ - 0xFF303030, /* 0xED */ - 0xFF343434, /* 0xEE */ - 0xFFD8F4F4, /* 0xEF */ - 0xFFB8E8E8, /* 0xF0 */ - - 0xFF9CDCDC, /* 0xF1 */ - 0xFF74C8C8, /* 0xF2 */ - 0xFF48C0C0, /* 0xF3 */ - 0xFF20B4B4, /* 0xF4 */ - 0xFF20B0B0, /* 0xF5 */ - 0xFF00A4A4, /* 0xF6 */ - 0xFF009898, /* 0xF7 */ - 0xFF008C8C, /* 0xF8 */ - 0xFF008484, /* 0xF9 */ - 0xFF007C7C, /* 0xFA */ - 0xFF007878, /* 0xFB */ - 0xFF007474, /* 0xFC */ - 0xFF007070, /* 0xFD */ - 0xFF006C6C, /* 0xFE */ - 0xFF980088, /* 0xFF */ -}; diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject deleted file mode 100644 index c63ab27..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore deleted file mode 100644 index 0a3664e..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -build/ -.dep/ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project deleted file mode 100644 index 71c5ff8..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project +++ /dev/null @@ -1,101 +0,0 @@ - - - STM32F429-DISCOVERY-TRIBUF - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - copy_PARENT/os - - - os-git - 2 - copy_PARENT1/os - - - - - copy_PARENT - $%7BPARENT-1-CHIBIOS%7D/ChibiOS-Contrib - - - copy_PARENT1 - $%7BPARENT-1-copy_PARENT%7D - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile deleted file mode 100644 index 68fe855..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile +++ /dev/null @@ -1,227 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F429I_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F429xI.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - $(CHIBIOS_CONTRIB)/os/various/tribuf.c \ - usbcfg.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h deleted file mode 100644 index 9a33ce5..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h +++ /dev/null @@ -1,522 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS FALSE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES FALSE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES FALSE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#define TRIBUF_USE_WAIT TRUE - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch deleted file mode 100644 index 58dd0ea..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch deleted file mode 100644 index ff16f51..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h deleted file mode 100644 index ebe3af9..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 115200 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers' includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h deleted file mode 100644 index cf1289f..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c deleted file mode 100644 index a7a33f6..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "chprintf.h" -#include "shell.h" -#if (HAL_USE_SERIAL_USB == TRUE) -#include "usbcfg.h" -#endif - -#include "tribuf.h" -#include -#include - -#if (HAL_USE_SERIAL_USB == TRUE) -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; -static BaseSequentialStream *const chout = (BaseSequentialStream *)&SDU1; -#else -static BaseSequentialStream *const chout = (BaseSequentialStream *)&SD1; -#endif - -/*===========================================================================*/ -/* Triple buffer related. */ -/*===========================================================================*/ - -#define READER_STACK_SIZE 256 -#define READER_WA_SIZE THD_WORKING_AREA_SIZE(READER_STACK_SIZE) -#define READER_DELAY_MS 200 -#define READER_PRIORITY (NORMALPRIO + 2) - -#define WRITER_STACK_SIZE 256 -#define WRITER_WA_SIZE THD_WORKING_AREA_SIZE(WRITER_STACK_SIZE) -#define WRITER_DELAY_MS 100 -#define WRITER_PRIORITY (NORMALPRIO + 1) - -static thread_t *reader_tp; -static uint16_t reader_delay = READER_DELAY_MS; -static tprio_t reader_priority = READER_PRIORITY; -static bool reader_suspend = false; -static systime_t reader_timeout = TIME_INFINITE; - -static thread_t *writer_tp; -static uint16_t writer_delay = WRITER_DELAY_MS; -static tprio_t writer_priority = WRITER_PRIORITY; -static bool writer_suspend = false; - -static tribuf_t tribuf_handler; -static char buffer_a, buffer_b, buffer_c; - -static const char text[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ\r\n"; - -/** - * @brief Reads from the front buffer. - * - * @return Buffered character from @p text or special symbol. - * @retval '.' No new front buffer within timeout. - */ -static char read_front(void) { - - const char *front; - msg_t error; - char c; - - /* Wait until a new front buffer gets available with prepared data */ - error = tribufWaitReadyTimeout(&tribuf_handler, reader_timeout); - if (error == MSG_OK) { - /* Retrieve the new front buffer */ - tribufSwapFront(&tribuf_handler); - front = (const char *)tribufGetFront(&tribuf_handler); - - /* Read data from the new front buffer */ - c = front[0]; - } else { - c = '.'; /* Timeout placeholder */ - } - return c; -} - -/* - * @brief Overwrites the back buffer with the provided character. - * - * @param[in] c Character to store into the current back buffer. - */ -static void write_back(char c) { - - char *back; - - /* Retrieve the current back buffer */ - back = (char *)tribufGetBack(&tribuf_handler); - - /* Prepare data onto the current back buffer */ - back[0] = c; - - /* Exchange the prepared buffer with a new one */ - tribufSwapBack(&tribuf_handler); -} - -/* - * Reads the front buffer and prints it. - */ -static THD_WORKING_AREA(reader_wa, READER_STACK_SIZE); -static THD_FUNCTION(reader_thread, arg) { - - thread_reference_t thread_ref; - tprio_t old_priority; - char c; - (void)arg; - - chRegSetThreadName("reader_thread"); - old_priority = chThdGetPriorityX(); - - for (;;) { - /* Read from the fron buffer and print the retrieved character */ - c = read_front(); - chprintf(chout, "%c", c); - - /* Change priority, suspend or delay */ - osalSysLock(); - palTogglePad(GPIOG, GPIOG_LED3_GREEN); - if (old_priority != reader_priority) { - chThdSetPriority(reader_priority); - } - if (reader_suspend) { - thread_ref = NULL; - osalThreadSuspendS(&thread_ref); - reader_suspend = false; - } else { - osalThreadSleepS(MS2ST(reader_delay)); - } - old_priority = chThdGetPriorityX(); - osalSysUnlock(); - } -} - -/* - * Overwrites the back buffer with a fixed text, character by character. - */ -static THD_WORKING_AREA(writer_wa, WRITER_STACK_SIZE); -static THD_FUNCTION(writer_thread, arg) { - - thread_reference_t thread_ref; - tprio_t old_priority; - size_t i; - char c; - (void)arg; - - chRegSetThreadName("writer_thread"); - old_priority = chThdGetPriorityX(); - - for (;;) { - for (i = 0; i < sizeof(text); ++i) { - /* Write the next character on the current back buffer */ - c = text[i]; - write_back(c); - - /* Change priority, suspend or delay */ - osalSysLock(); - palTogglePad(GPIOG, GPIOG_LED4_RED); - if (old_priority != writer_priority) { - chThdSetPriority(writer_priority); - } - if (writer_suspend) { - thread_ref = NULL; - osalThreadSuspendS(&thread_ref); - writer_suspend = false; - } else { - osalThreadSleepS(MS2ST(writer_delay)); - } - osalSysUnlock(); - } - } -} - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define streq(s1, s2) (strcmp((s1), (s2)) == 0) - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_reset(BaseSequentialStream *chp, int argc, char *argv[]) { - - (void)argv; - - if (argc > 0) { - chprintf(chp, "Usage: reset\r\n"); - return; - } - - chprintf(chp, "Will reset in 200ms\r\n"); - chThdSleepMilliseconds(200); - NVIC_SystemReset(); -} - -static void cmd_run(BaseSequentialStream *chp, int argc, char *argv[]) { - - thread_reference_t thread_ref; - const char *const usage = "Usage: run (reader|writer)\r\n"; - - if (argc != 1) { - chprintf(chp, usage); - return; - } - - if (streq(argv[0], "reader")) { - osalSysLock(); - if (reader_suspend) { - thread_ref = (thread_reference_t)reader_tp; - osalThreadResumeS(&thread_ref, MSG_OK); - } - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - if (writer_suspend) { - thread_ref = (thread_reference_t)writer_tp; - osalThreadResumeS(&thread_ref, MSG_OK); - } - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_stop(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: stop (reader|writer)\r\n"; - - if (argc != 1) { - chprintf(chp, usage); - return; - } - - if (streq(argv[0], "reader")) { - osalSysLock(); - reader_suspend = true; - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - writer_suspend = true; - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_delay(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: delay (reader|writer) DELAY_MS\r\n"; - uint16_t delay; - - if (argc != 2) { - chprintf(chp, usage); - return; - } - delay = (uint16_t)atoi(argv[1]); - - if (streq(argv[0], "reader")) { - osalSysLock(); - reader_delay = delay; - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - writer_delay = delay; - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_priority(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = - "Usage: priority (reader|writer) THREAD_PRIORITY\r\n"; - tprio_t priority; - - if (argc != 2) { - chprintf(chp, usage); - return; - } - priority = (tprio_t)atoi(argv[1]); - - if (streq(argv[0], "reader")) { - osalSysLock(); - reader_priority = priority; - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - writer_priority = priority; - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_timeout(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: timeout TIMEOUT_MS\r\n"; - systime_t timeout; - - if (argc != 1) { - chprintf(chp, usage); - return; - } - - if (streq(argv[0], "-")) - timeout = TIME_IMMEDIATE; - else if (streq(argv[0], "*")) - timeout = TIME_INFINITE; - else - timeout = (systime_t)atoi(argv[0]); - - osalSysLock(); - reader_timeout = timeout; - osalSysUnlock(); -} - -static void cmd_params(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: params\r\n"; - - uint32_t reader_delay_; - uint32_t reader_priority_; - uint32_t reader_suspend_; - uint32_t reader_timeout_; - - uint32_t writer_delay_; - uint32_t writer_priority_; - uint32_t writer_suspend_; - - (void)argv; - if (argc != 0) { - chprintf(chp, usage); - return; - } - - osalSysLock(); - reader_delay_ = (uint32_t)reader_delay; - reader_priority_ = (uint32_t)reader_priority; - reader_suspend_ = (uint32_t)reader_suspend; - reader_timeout_ = (uint32_t)reader_timeout; - - writer_delay_ = (uint32_t)writer_delay; - writer_priority_ = (uint32_t)writer_priority; - writer_suspend_ = (uint32_t)writer_suspend; - osalSysUnlock(); - - chprintf(chp, "reader_delay %U\r\n", reader_delay_); - chprintf(chp, "reader_priority %U\r\n", reader_priority_); - chprintf(chp, "reader_suspend %U\r\n", reader_suspend_); - if (reader_timeout_ == TIME_IMMEDIATE) - chprintf(chp, "reader_timeout -\r\n"); - if (reader_timeout_ == TIME_INFINITE) - chprintf(chp, "reader_timeout *\r\n"); - else - chprintf(chp, "reader_timeout %U\r\n", reader_timeout_); - - chprintf(chp, "writer_delay %U\r\n", writer_delay_); - chprintf(chp, "writer_priority %U\r\n", writer_priority_); - chprintf(chp, "writer_suspend %U\r\n", writer_suspend_); -} - -static const ShellCommand commands[] = { - {"reset", cmd_reset}, - {"run", cmd_run}, - {"stop", cmd_stop}, - {"delay", cmd_delay}, - {"priority", cmd_priority}, - {"timeout", cmd_timeout}, - {"params", cmd_params}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { -#if (HAL_USE_SERIAL_USB == TRUE) - (BaseSequentialStream *)&SDU1, -#else - (BaseSequentialStream *)&SD1, -#endif - commands -}; - -/*===========================================================================*/ -/* Initialization and main thread. */ -/*===========================================================================*/ - -/* - * Application entry point. - */ -int main(void) { - - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - -#if (HAL_USE_SERIAL_USB == TRUE) - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); -#else - /* - * Initializes serial port. - */ - sdStart(&SD1, NULL); -#endif /* HAL_USE_SERIAL_USB */ - - /* - * Writer and reader threads started for triple buffer demo. - */ - tribufObjectInit(&tribuf_handler, &buffer_a, &buffer_b, &buffer_c); - - reader_tp = chThdCreateStatic(reader_wa, READER_WA_SIZE, - reader_priority, reader_thread, NULL); - - writer_tp = chThdCreateStatic(writer_wa, WRITER_WA_SIZE, - writer_priority, writer_thread, NULL); - - /* - * Normal main() thread activity, in this demo it just performs - * a shell respawn upon its termination. - */ - for (;;) { - if (!shelltp) { -#if (HAL_USE_SERIAL_USB == TRUE) - if (SDU1.config->usbp->state == USB_ACTIVE) { - /* Spawns a new shell.*/ - shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1); - } -#else - shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1); -#endif - } - else { - /* If the previous shell exited.*/ - if (chThdTerminatedX(shelltp)) { - /* Recovers memory of the previous shell.*/ - chThdRelease(shelltp); - shelltp = NULL; - } - } - chThdSleepMilliseconds(500); - } - return 0; -} - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h deleted file mode 100644 index ec65ff7..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -#define STM32_SAISRC STM32_SAISRC_PLL -#define STM32_PLLSAIN_VALUE 192 -#define STM32_PLLSAIQ_VALUE 7 -#define STM32_PLLSAIR_VALUE 4 -#define STM32_PLLSAIR_POST STM32_SAIR_DIV4 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_USE_SPI4 FALSE -#define STM32_SPI_USE_SPI5 FALSE -#define STM32_SPI_USE_SPI6 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_SPI_SPI6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI4_DMA_PRIORITY 1 -#define STM32_SPI_SPI5_DMA_PRIORITY 1 -#define STM32_SPI_SPI6_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_SPI4_IRQ_PRIORITY 10 -#define STM32_SPI_SPI5_IRQ_PRIORITY 10 -#define STM32_SPI_SPI6_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * Header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h deleted file mode 100644 index f9f7aa7..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE -#define STM32_SDRAM_USE_FSMC_SDRAM1 FALSE -#define STM32_SDRAM_USE_FSMC_SDRAM2 FALSE - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt deleted file mode 100644 index cc7f406..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 STM32F429. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F429I-Discovery board. - -** The Demo ** - -This demo shows how to use a triple buffer handler, with one writer thread and -one reader thread. -The writer thread puts a character into the current back buffer, thus swapping -the back buffer with the orphan buffer for a new write. The writer then sleeps -for a specified delay in milliseconds. -The reader thread gets waits (if there is a timeout) until the orphan buffer -contains available data, becoming the new front buffer. The character is read -from the new front buffer and printed. The reader then sleeps for a specified -delay in milliseconds. -A simple command shell is activated on virtual serial port SD1 or SDU1. -Via command line it is possible to start, stop, set the delay, and set the -thread priority of the reader and writer threads. -The reader can also be assigned a wait timeout in milliseconds, with special -cases of "*" for infinite timeout, and "-" (or 0 ms) for none. - -** Build Procedure ** - -The demo has been tested by using the free GNU Tools ARM Embedded toolchain -and ChibiStudio. Just modify the TRGT line in the makefile in order to use -different GCC toolchains. diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c deleted file mode 100644 index 9f95a2a..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Endpoints to be used for USBD2. - */ -#define USBD2_DATA_REQUEST_EP 1 -#define USBD2_DATA_AVAILABLE_EP 1 -#define USBD2_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD2, - USBD2_DATA_REQUEST_EP, - USBD2_DATA_AVAILABLE_EP, - USBD2_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h deleted file mode 100644 index 2ffaa17..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject deleted file mode 100644 index 109f8d7..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project deleted file mode 100644 index a6f7408..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project +++ /dev/null @@ -1,102 +0,0 @@ - - - RT-TM4C123G-LAUNCHPAD - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile deleted file mode 100644 index 322b39b..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch deleted file mode 100644 index 552223c..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h deleted file mode 100644 index cd6edf3..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c deleted file mode 100644 index 6723c62..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -typedef struct led_config -{ - ioportid_t port; - uint32_t sleep; - uint8_t pin; -} led_config_t; - -/* - * LED blinker thread. - */ -static THD_WORKING_AREA(waBlinkLedRed, 128); -static THD_WORKING_AREA(waBlinkLedGreen, 128); -static THD_WORKING_AREA(waBlinkLedBlue, 128); -static THD_FUNCTION(blinkLed, arg) { - led_config_t *ledConfig = (led_config_t*) arg; - - chRegSetThreadName("Blinker"); - - palSetPadMode(ledConfig->port, ledConfig->pin, PAL_MODE_OUTPUT_PUSHPULL); - - while (TRUE) { - chThdSleepMilliseconds(ledConfig->sleep); - palTogglePad(ledConfig->port, ledConfig->pin); - } -} - -/* - * Application entry point. - */ -int main(void) -{ - led_config_t ledRed, ledGreen, ledBlue; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* Configure RX and TX pins for UART0.*/ - palSetPadMode(GPIOA, GPIOA_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - palSetPadMode(GPIOA, GPIOA_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - - /* Start the serial driver with the default configuration.*/ - sdStart(&SD1, NULL); - - if (!palReadPad(GPIOF, GPIOF_SW2)) { - test_execute((BaseSequentialStream *)&SD1); - } - - ledRed.port = GPIOF; - ledRed.pin = GPIOF_LED_RED; - ledRed.sleep = 100; - - ledGreen.port = GPIOF; - ledGreen.pin = GPIOF_LED_GREEN; - ledGreen.sleep = 101; - - ledBlue.port = GPIOF; - ledBlue.pin = GPIOF_LED_BLUE; - ledBlue.sleep = 102; - - /* Creating the blinker threads.*/ - chThdCreateStatic(waBlinkLedRed, sizeof(waBlinkLedRed), NORMALPRIO, blinkLed, - &ledRed); - - chThdCreateStatic(waBlinkLedGreen, sizeof(waBlinkLedGreen), NORMALPRIO, - blinkLed, &ledGreen); - - chThdCreateStatic(waBlinkLedBlue, sizeof(waBlinkLedBlue), NORMALPRIO, - blinkLed, &ledBlue); - - /* Normal main() thread activity.*/ - while (TRUE) { - chThdSleepMilliseconds(100); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h deleted file mode 100644 index 926cab1..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject deleted file mode 100644 index efeab1b..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject +++ /dev/null @@ -1,63 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project deleted file mode 100644 index a380601..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project +++ /dev/null @@ -1,54 +0,0 @@ - - - RT-TM4C1294-LAUNCHPAD-LWIP - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD - - - community_os - 2 - CHIBIOS3/community - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile deleted file mode 100644 index e5cd47a..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/os/various/lwip_bindings/lwip.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(LWSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - main.c \ - web/web.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(LWINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h deleted file mode 100644 index dd5025e..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch deleted file mode 100644 index c9016ed..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h deleted file mode 100644 index 6e62629..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC TRUE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 64 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h deleted file mode 100644 index c4829fa..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h +++ /dev/null @@ -1,2127 +0,0 @@ -/** - * @file - * - * lwIP Options Configuration - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels - * - */ -#ifndef __LWIPOPT_H__ -#define __LWIPOPT_H__ - - -/* - ----------------------------------------------- - ---------- Platform specific locking ---------- - ----------------------------------------------- -*/ - -/** - * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain - * critical regions during buffer allocation, deallocation and memory - * allocation and deallocation. - */ -#ifndef SYS_LIGHTWEIGHT_PROT -#define SYS_LIGHTWEIGHT_PROT 0 -#endif - -/** - * NO_SYS==1: Provides VERY minimal functionality. Otherwise, - * use lwIP facilities. - */ -#ifndef NO_SYS -#define NO_SYS 0 -#endif - -/** - * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1 - * Mainly for compatibility to old versions. - */ -#ifndef NO_SYS_NO_TIMERS -#define NO_SYS_NO_TIMERS 0 -#endif - -/** - * MEMCPY: override this if you have a faster implementation at hand than the - * one included in your C library - */ -#ifndef MEMCPY -#define MEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/** - * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a - * call to memcpy() if the length is known at compile time and is small. - */ -#ifndef SMEMCPY -#define SMEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/* - ------------------------------------ - ---------- Memory options ---------- - ------------------------------------ -*/ -/** - * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library - * instead of the lwip internal allocator. Can save code size if you - * already use it. - */ -#ifndef MEM_LIBC_MALLOC -#define MEM_LIBC_MALLOC 0 -#endif - -/** -* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. -* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution -* speed and usage from interrupts! -*/ -#ifndef MEMP_MEM_MALLOC -#define MEMP_MEM_MALLOC 0 -#endif - -/** - * MEM_ALIGNMENT: should be set to the alignment of the CPU - * 4 byte alignment -> #define MEM_ALIGNMENT 4 - * 2 byte alignment -> #define MEM_ALIGNMENT 2 - */ -#ifndef MEM_ALIGNMENT -#define MEM_ALIGNMENT 4 -#endif - -/** - * MEM_SIZE: the size of the heap memory. If the application will send - * a lot of data that needs to be copied, this should be set high. - */ -#ifndef MEM_SIZE -#define MEM_SIZE 1600 -#endif - -/** - * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array. - * This can be used to individually change the location of each pool. - * Default is one big array for all pools - */ -#ifndef MEMP_SEPARATE_POOLS -#define MEMP_SEPARATE_POOLS 0 -#endif - -/** - * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable - * amount of bytes before and after each memp element in every pool and fills - * it with a prominent default value. - * MEMP_OVERFLOW_CHECK == 0 no checking - * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed - * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time - * memp_malloc() or memp_free() is called (useful but slow!) - */ -#ifndef MEMP_OVERFLOW_CHECK -#define MEMP_OVERFLOW_CHECK 0 -#endif - -/** - * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make - * sure that there are no cycles in the linked lists. - */ -#ifndef MEMP_SANITY_CHECK -#define MEMP_SANITY_CHECK 0 -#endif - -/** - * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set - * of memory pools of various sizes. When mem_malloc is called, an element of - * the smallest pool that can provide the length needed is returned. - * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. - */ -#ifndef MEM_USE_POOLS -#define MEM_USE_POOLS 0 -#endif - -/** - * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next - * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more - * reliable. */ -#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL -#define MEM_USE_POOLS_TRY_BIGGER_POOL 0 -#endif - -/** - * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h - * that defines additional pools beyond the "standard" ones required - * by lwIP. If you set this to 1, you must have lwippools.h in your - * inlude path somewhere. - */ -#ifndef MEMP_USE_CUSTOM_POOLS -#define MEMP_USE_CUSTOM_POOLS 0 -#endif - -/** - * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from - * interrupt context (or another context that doesn't allow waiting for a - * semaphore). - * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, - * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs - * with each loop so that mem_free can run. - * - * ATTENTION: As you can see from the above description, this leads to dis-/ - * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc - * can need longer. - * - * If you don't want that, at least for NO_SYS=0, you can still use the following - * functions to enqueue a deallocation call which then runs in the tcpip_thread - * context: - * - pbuf_free_callback(p); - * - mem_free_callback(m); - */ -#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT -#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 -#endif - -/* - ------------------------------------------------ - ---------- Internal Memory Pool Sizes ---------- - ------------------------------------------------ -*/ -/** - * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). - * If the application sends a lot of data out of ROM (or other static memory), - * this should be set high. - */ -#ifndef MEMP_NUM_PBUF -#define MEMP_NUM_PBUF 16 -#endif - -/** - * MEMP_NUM_RAW_PCB: Number of raw connection PCBs - * (requires the LWIP_RAW option) - */ -#ifndef MEMP_NUM_RAW_PCB -#define MEMP_NUM_RAW_PCB 4 -#endif - -/** - * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One - * per active UDP "connection". - * (requires the LWIP_UDP option) - */ -#ifndef MEMP_NUM_UDP_PCB -#define MEMP_NUM_UDP_PCB 4 -#endif - -/** - * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB -#define MEMP_NUM_TCP_PCB 5 -#endif - -/** - * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB_LISTEN -#define MEMP_NUM_TCP_PCB_LISTEN 8 -#endif - -/** - * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_SEG -#define MEMP_NUM_TCP_SEG 16 -#endif - -/** - * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for - * reassembly (whole packets, not fragments!) - */ -#ifndef MEMP_NUM_REASSDATA -#define MEMP_NUM_REASSDATA 5 -#endif - -/** - * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent - * (fragments, not whole packets!). - * This is only used with IP_FRAG_USES_STATIC_BUF==0 and - * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs - * where the packet is not yet sent when netif->output returns. - */ -#ifndef MEMP_NUM_FRAG_PBUF -#define MEMP_NUM_FRAG_PBUF 15 -#endif - -/** - * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing - * packets (pbufs) that are waiting for an ARP request (to resolve - * their destination address) to finish. - * (requires the ARP_QUEUEING option) - */ -#ifndef MEMP_NUM_ARP_QUEUE -#define MEMP_NUM_ARP_QUEUE 30 -#endif - -/** - * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces - * can be members et the same time (one per netif - allsystems group -, plus one - * per netif membership). - * (requires the LWIP_IGMP option) - */ -#ifndef MEMP_NUM_IGMP_GROUP -#define MEMP_NUM_IGMP_GROUP 8 -#endif - -/** - * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. - * (requires NO_SYS==0) - * The default number of timeouts is calculated here for all enabled modules. - * The formula expects settings to be either '0' or '1'. - */ -#ifndef MEMP_NUM_SYS_TIMEOUT -#define MEMP_NUM_SYS_TIMEOUT (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT) -#endif - -/** - * MEMP_NUM_NETBUF: the number of struct netbufs. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETBUF -#define MEMP_NUM_NETBUF 2 -#endif - -/** - * MEMP_NUM_NETCONN: the number of struct netconns. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETCONN -#define MEMP_NUM_NETCONN 4 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used - * for callback/timeout API communication. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_API -#define MEMP_NUM_TCPIP_MSG_API 8 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used - * for incoming packets. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_INPKT -#define MEMP_NUM_TCPIP_MSG_INPKT 8 -#endif - -/** - * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree. - */ -#ifndef MEMP_NUM_SNMP_NODE -#define MEMP_NUM_SNMP_NODE 50 -#endif - -/** - * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree. - * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least! - */ -#ifndef MEMP_NUM_SNMP_ROOTNODE -#define MEMP_NUM_SNMP_ROOTNODE 30 -#endif - -/** - * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to - * be changed normally) - 2 of these are used per request (1 for input, - * 1 for output) - */ -#ifndef MEMP_NUM_SNMP_VARBIND -#define MEMP_NUM_SNMP_VARBIND 2 -#endif - -/** - * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used - * (does not have to be changed normally) - 3 of these are used per request - * (1 for the value read and 2 for OIDs - input and output) - */ -#ifndef MEMP_NUM_SNMP_VALUE -#define MEMP_NUM_SNMP_VALUE 3 -#endif - -/** - * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls - * (before freeing the corresponding memory using lwip_freeaddrinfo()). - */ -#ifndef MEMP_NUM_NETDB -#define MEMP_NUM_NETDB 1 -#endif - -/** - * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list - * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1. - */ -#ifndef MEMP_NUM_LOCALHOSTLIST -#define MEMP_NUM_LOCALHOSTLIST 1 -#endif - -/** - * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE - * interfaces (only used with PPPOE_SUPPORT==1) - */ -#ifndef MEMP_NUM_PPPOE_INTERFACES -#define MEMP_NUM_PPPOE_INTERFACES 1 -#endif - -/** - * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. - */ -#ifndef PBUF_POOL_SIZE -#define PBUF_POOL_SIZE 16 -#endif - -/* - --------------------------------- - ---------- ARP options ---------- - --------------------------------- -*/ -/** - * LWIP_ARP==1: Enable ARP functionality. - */ -#ifndef LWIP_ARP -#define LWIP_ARP 1 -#endif - -/** - * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. - */ -#ifndef ARP_TABLE_SIZE -#define ARP_TABLE_SIZE 10 -#endif - -/** - * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address - * resolution. By default, only the most recent packet is queued per IP address. - * This is sufficient for most protocols and mainly reduces TCP connection - * startup time. Set this to 1 if you know your application sends more than one - * packet in a row to an IP address that is not in the ARP cache. - */ -#ifndef ARP_QUEUEING -#define ARP_QUEUEING 0 -#endif - -/** - * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be - * updated with the source MAC and IP addresses supplied in the packet. - * You may want to disable this if you do not trust LAN peers to have the - * correct addresses, or as a limited approach to attempt to handle - * spoofing. If disabled, lwIP will need to make a new ARP request if - * the peer is not already in the ARP table, adding a little latency. - * The peer *is* in the ARP table if it requested our address before. - * Also notice that this slows down input processing of every IP packet! - */ -#ifndef ETHARP_TRUST_IP_MAC -#define ETHARP_TRUST_IP_MAC 0 -#endif - -/** - * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header. - * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. - * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. - * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. - * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan) - * that returns 1 to accept a packet or 0 to drop a packet. - */ -#ifndef ETHARP_SUPPORT_VLAN -#define ETHARP_SUPPORT_VLAN 0 -#endif - -/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP - * might be disabled - */ -#ifndef LWIP_ETHERNET -#define LWIP_ETHERNET (LWIP_ARP || PPPOE_SUPPORT) -#endif - -/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure - * alignment of payload after that header. Since the header is 14 bytes long, - * without this padding e.g. addresses in the IP header will not be aligned - * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms. - */ -#ifndef ETH_PAD_SIZE -#define ETH_PAD_SIZE 0 -#endif - -/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table - * entries (using etharp_add_static_entry/etharp_remove_static_entry). - */ -#ifndef ETHARP_SUPPORT_STATIC_ENTRIES -#define ETHARP_SUPPORT_STATIC_ENTRIES 0 -#endif - - -/* - -------------------------------- - ---------- IP options ---------- - -------------------------------- -*/ -/** - * IP_FORWARD==1: Enables the ability to forward IP packets across network - * interfaces. If you are going to run lwIP on a device with only one network - * interface, define this to 0. - */ -#ifndef IP_FORWARD -#define IP_FORWARD 0 -#endif - -/** - * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. - * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. - * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). - */ -#ifndef IP_OPTIONS_ALLOWED -#define IP_OPTIONS_ALLOWED 1 -#endif - -/** - * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that - * this option does not affect outgoing packet sizes, which can be controlled - * via IP_FRAG. - */ -#ifndef IP_REASSEMBLY -#define IP_REASSEMBLY 1 -#endif - -/** - * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note - * that this option does not affect incoming packet sizes, which can be - * controlled via IP_REASSEMBLY. - */ -#ifndef IP_FRAG -#define IP_FRAG 1 -#endif - -/** - * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) - * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived - * in this time, the whole packet is discarded. - */ -#ifndef IP_REASS_MAXAGE -#define IP_REASS_MAXAGE 3 -#endif - -/** - * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. - * Since the received pbufs are enqueued, be sure to configure - * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive - * packets even if the maximum amount of fragments is enqueued for reassembly! - */ -#ifndef IP_REASS_MAX_PBUFS -#define IP_REASS_MAX_PBUFS 10 -#endif - -/** - * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP - * fragmentation. Otherwise pbufs are allocated and reference the original - * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1, - * new PBUF_RAM pbufs are used for fragments). - * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs! - */ -#ifndef IP_FRAG_USES_STATIC_BUF -#define IP_FRAG_USES_STATIC_BUF 0 -#endif - -/** - * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer - * (requires IP_FRAG_USES_STATIC_BUF==1) - */ -#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) -#define IP_FRAG_MAX_MTU 1500 -#endif - -/** - * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. - */ -#ifndef IP_DEFAULT_TTL -#define IP_DEFAULT_TTL 255 -#endif - -/** - * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast - * filter per pcb on udp and raw send operations. To enable broadcast filter - * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. - */ -#ifndef IP_SOF_BROADCAST -#define IP_SOF_BROADCAST 0 -#endif - -/** - * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast - * filter on recv operations. - */ -#ifndef IP_SOF_BROADCAST_RECV -#define IP_SOF_BROADCAST_RECV 0 -#endif - -/** - * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back - * out on the netif where it was received. This should only be used for - * wireless networks. - * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming - * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags! - */ -#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF -#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0 -#endif - -/** - * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first - * local TCP/UDP pcb (default==0). This can prevent creating predictable port - * numbers after booting a device. - */ -#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS -#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0 -#endif - -/* - ---------------------------------- - ---------- ICMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_ICMP==1: Enable ICMP module inside the IP stack. - * Be careful, disable that make your product non-compliant to RFC1122 - */ -#ifndef LWIP_ICMP -#define LWIP_ICMP 1 -#endif - -/** - * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. - */ -#ifndef ICMP_TTL -#define ICMP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) - */ -#ifndef LWIP_BROADCAST_PING -#define LWIP_BROADCAST_PING 0 -#endif - -/** - * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) - */ -#ifndef LWIP_MULTICAST_PING -#define LWIP_MULTICAST_PING 0 -#endif - -/* - --------------------------------- - ---------- RAW options ---------- - --------------------------------- -*/ -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#ifndef LWIP_RAW -#define LWIP_RAW 1 -#endif - -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#ifndef RAW_TTL -#define RAW_TTL (IP_DEFAULT_TTL) -#endif - -/* - ---------------------------------- - ---------- DHCP options ---------- - ---------------------------------- -*/ -/** - * LWIP_DHCP==1: Enable DHCP module. - */ -#ifndef LWIP_DHCP -#define LWIP_DHCP 0 -#endif - -/** - * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. - */ -#ifndef DHCP_DOES_ARP_CHECK -#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) -#endif - -/* - ------------------------------------ - ---------- AUTOIP options ---------- - ------------------------------------ -*/ -/** - * LWIP_AUTOIP==1: Enable AUTOIP module. - */ -#ifndef LWIP_AUTOIP -#define LWIP_AUTOIP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on - * the same interface at the same time. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP -#define LWIP_DHCP_AUTOIP_COOP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes - * that should be sent before falling back on AUTOIP. This can be set - * as low as 1 to get an AutoIP address very quickly, but you should - * be prepared to handle a changing IP address when DHCP overrides - * AutoIP. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES -#define LWIP_DHCP_AUTOIP_COOP_TRIES 9 -#endif - -/* - ---------------------------------- - ---------- SNMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP - * transport. - */ -#ifndef LWIP_SNMP -#define LWIP_SNMP 0 -#endif - -/** - * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will - * allow. At least one request buffer is required. - * Does not have to be changed unless external MIBs answer request asynchronously - */ -#ifndef SNMP_CONCURRENT_REQUESTS -#define SNMP_CONCURRENT_REQUESTS 1 -#endif - -/** - * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap - * destination is required - */ -#ifndef SNMP_TRAP_DESTINATIONS -#define SNMP_TRAP_DESTINATIONS 1 -#endif - -/** - * SNMP_PRIVATE_MIB: - * When using a private MIB, you have to create a file 'private_mib.h' that contains - * a 'struct mib_array_node mib_private' which contains your MIB. - */ -#ifndef SNMP_PRIVATE_MIB -#define SNMP_PRIVATE_MIB 0 -#endif - -/** - * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not - * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). - * Unsafe requests are disabled by default! - */ -#ifndef SNMP_SAFE_REQUESTS -#define SNMP_SAFE_REQUESTS 1 -#endif - -/** - * The maximum length of strings used. This affects the size of - * MEMP_SNMP_VALUE elements. - */ -#ifndef SNMP_MAX_OCTET_STRING_LEN -#define SNMP_MAX_OCTET_STRING_LEN 127 -#endif - -/** - * The maximum depth of the SNMP tree. - * With private MIBs enabled, this depends on your MIB! - * This affects the size of MEMP_SNMP_VALUE elements. - */ -#ifndef SNMP_MAX_TREE_DEPTH -#define SNMP_MAX_TREE_DEPTH 15 -#endif - -/** - * The size of the MEMP_SNMP_VALUE elements, normally calculated from - * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH. - */ -#ifndef SNMP_MAX_VALUE_SIZE -#define SNMP_MAX_VALUE_SIZE LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH)) -#endif - -/* - ---------------------------------- - ---------- IGMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_IGMP==1: Turn on IGMP module. - */ -#ifndef LWIP_IGMP -#define LWIP_IGMP 0 -#endif - -/* - ---------------------------------- - ---------- DNS options ----------- - ---------------------------------- -*/ -/** - * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS - * transport. - */ -#ifndef LWIP_DNS -#define LWIP_DNS 0 -#endif - -/** DNS maximum number of entries to maintain locally. */ -#ifndef DNS_TABLE_SIZE -#define DNS_TABLE_SIZE 4 -#endif - -/** DNS maximum host name length supported in the name table. */ -#ifndef DNS_MAX_NAME_LENGTH -#define DNS_MAX_NAME_LENGTH 256 -#endif - -/** The maximum of DNS servers */ -#ifndef DNS_MAX_SERVERS -#define DNS_MAX_SERVERS 2 -#endif - -/** DNS do a name checking between the query and the response. */ -#ifndef DNS_DOES_NAME_CHECK -#define DNS_DOES_NAME_CHECK 1 -#endif - -/** DNS message max. size. Default value is RFC compliant. */ -#ifndef DNS_MSG_SIZE -#define DNS_MSG_SIZE 512 -#endif - -/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, - * you have to define - * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} - * (an array of structs name/address, where address is an u32_t in network - * byte order). - * - * Instead, you can also use an external function: - * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) - * that returns the IP address or INADDR_NONE if not found. - */ -#ifndef DNS_LOCAL_HOSTLIST -#define DNS_LOCAL_HOSTLIST 0 -#endif /* DNS_LOCAL_HOSTLIST */ - -/** If this is turned on, the local host-list can be dynamically changed - * at runtime. */ -#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC -#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 -#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ - -/* - --------------------------------- - ---------- UDP options ---------- - --------------------------------- -*/ -/** - * LWIP_UDP==1: Turn on UDP. - */ -#ifndef LWIP_UDP -#define LWIP_UDP 1 -#endif - -/** - * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) - */ -#ifndef LWIP_UDPLITE -#define LWIP_UDPLITE 0 -#endif - -/** - * UDP_TTL: Default Time-To-Live value. - */ -#ifndef UDP_TTL -#define UDP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. - */ -#ifndef LWIP_NETBUF_RECVINFO -#define LWIP_NETBUF_RECVINFO 0 -#endif - -/* - --------------------------------- - ---------- TCP options ---------- - --------------------------------- -*/ -/** - * LWIP_TCP==1: Turn on TCP. - */ -#ifndef LWIP_TCP -#define LWIP_TCP 1 -#endif - -/** - * TCP_TTL: Default Time-To-Live value. - */ -#ifndef TCP_TTL -#define TCP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * TCP_WND: The size of a TCP window. This must be at least - * (2 * TCP_MSS) for things to work well - */ -#ifndef TCP_WND -#define TCP_WND (4 * TCP_MSS) -#endif - -/** - * TCP_MAXRTX: Maximum number of retransmissions of data segments. - */ -#ifndef TCP_MAXRTX -#define TCP_MAXRTX 12 -#endif - -/** - * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. - */ -#ifndef TCP_SYNMAXRTX -#define TCP_SYNMAXRTX 6 -#endif - -/** - * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. - * Define to 0 if your device is low on memory. - */ -#ifndef TCP_QUEUE_OOSEQ -#define TCP_QUEUE_OOSEQ (LWIP_TCP) -#endif - -/** - * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, - * you might want to increase this.) - * For the receive side, this MSS is advertised to the remote side - * when opening a connection. For the transmit size, this MSS sets - * an upper limit on the MSS advertised by the remote host. - */ -#ifndef TCP_MSS -#define TCP_MSS 536 -#endif - -/** - * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really - * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which - * reflects the available reassembly buffer size at the remote host) and the - * largest size permitted by the IP layer" (RFC 1122) - * Setting this to 1 enables code that checks TCP_MSS against the MTU of the - * netif used for a connection and limits the MSS if it would be too big otherwise. - */ -#ifndef TCP_CALCULATE_EFF_SEND_MSS -#define TCP_CALCULATE_EFF_SEND_MSS 1 -#endif - - -/** - * TCP_SND_BUF: TCP sender buffer space (bytes). - * To achieve good performance, this should be at least 2 * TCP_MSS. - */ -#ifndef TCP_SND_BUF -#define TCP_SND_BUF (2 * TCP_MSS) -#endif - -/** - * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least - * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. - */ -#ifndef TCP_SND_QUEUELEN -#define TCP_SND_QUEUELEN ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS)) -#endif - -/** - * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than - * TCP_SND_BUF. It is the amount of space which must be available in the - * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT). - */ -#ifndef TCP_SNDLOWAT -#define TCP_SNDLOWAT LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1) -#endif - -/** - * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less - * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below - * this number, select returns writable (combined with TCP_SNDLOWAT). - */ -#ifndef TCP_SNDQUEUELOWAT -#define TCP_SNDQUEUELOWAT LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5) -#endif - -/** - * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb. - * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0. - */ -#ifndef TCP_OOSEQ_MAX_BYTES -#define TCP_OOSEQ_MAX_BYTES 0 -#endif - -/** - * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb. - * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0. - */ -#ifndef TCP_OOSEQ_MAX_PBUFS -#define TCP_OOSEQ_MAX_PBUFS 0 -#endif - -/** - * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. - */ -#ifndef TCP_LISTEN_BACKLOG -#define TCP_LISTEN_BACKLOG 0 -#endif - -/** - * The maximum allowed backlog for TCP listen netconns. - * This backlog is used unless another is explicitly specified. - * 0xff is the maximum (u8_t). - */ -#ifndef TCP_DEFAULT_LISTEN_BACKLOG -#define TCP_DEFAULT_LISTEN_BACKLOG 0xff -#endif - -/** - * TCP_OVERSIZE: The maximum number of bytes that tcp_write may - * allocate ahead of time in an attempt to create shorter pbuf chains - * for transmission. The meaningful range is 0 to TCP_MSS. Some - * suggested values are: - * - * 0: Disable oversized allocation. Each tcp_write() allocates a new - pbuf (old behaviour). - * 1: Allocate size-aligned pbufs with minimal excess. Use this if your - * scatter-gather DMA requires aligned fragments. - * 128: Limit the pbuf/memory overhead to 20%. - * TCP_MSS: Try to create unfragmented TCP packets. - * TCP_MSS/4: Try to create 4 fragments or less per TCP packet. - */ -#ifndef TCP_OVERSIZE -#define TCP_OVERSIZE TCP_MSS -#endif - -/** - * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. - */ -#ifndef LWIP_TCP_TIMESTAMPS -#define LWIP_TCP_TIMESTAMPS 0 -#endif - -/** - * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an - * explicit window update - */ -#ifndef TCP_WND_UPDATE_THRESHOLD -#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) -#endif - -/** - * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1. - * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all - * events (accept, sent, etc) that happen in the system. - * LWIP_CALLBACK_API==1: The PCB callback function is called directly - * for the event. This is the default. - */ -#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API) -#define LWIP_EVENT_API 0 -#define LWIP_CALLBACK_API 1 -#endif - - -/* - ---------------------------------- - ---------- Pbuf options ---------- - ---------------------------------- -*/ -/** - * PBUF_LINK_HLEN: the number of bytes that should be allocated for a - * link level header. The default is 14, the standard value for - * Ethernet. - */ -#ifndef PBUF_LINK_HLEN -#define PBUF_LINK_HLEN (14 + ETH_PAD_SIZE) -#endif - -/** - * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is - * designed to accomodate single full size TCP frame in one pbuf, including - * TCP_MSS, IP header, and link header. - */ -#ifndef PBUF_POOL_BUFSIZE -#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) -#endif - -/* - ------------------------------------------------ - ---------- Network Interfaces options ---------- - ------------------------------------------------ -*/ -/** - * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname - * field. - */ -#ifndef LWIP_NETIF_HOSTNAME -#define LWIP_NETIF_HOSTNAME 0 -#endif - -/** - * LWIP_NETIF_API==1: Support netif api (in netifapi.c) - */ -#ifndef LWIP_NETIF_API -#define LWIP_NETIF_API 0 -#endif - -/** - * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface - * changes its up/down status (i.e., due to DHCP IP acquistion) - */ -#ifndef LWIP_NETIF_STATUS_CALLBACK -#define LWIP_NETIF_STATUS_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface - * whenever the link changes (i.e., link down) - */ -#ifndef LWIP_NETIF_LINK_CALLBACK -#define LWIP_NETIF_LINK_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called - * when a netif has been removed - */ -#ifndef LWIP_NETIF_REMOVE_CALLBACK -#define LWIP_NETIF_REMOVE_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table - * indices) in struct netif. TCP and UDP can make use of this to prevent - * scanning the ARP table for every sent packet. While this is faster for big - * ARP tables or many concurrent connections, it might be counterproductive - * if you have a tiny ARP table or if there never are concurrent connections. - */ -#ifndef LWIP_NETIF_HWADDRHINT -#define LWIP_NETIF_HWADDRHINT 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP - * address equal to the netif IP address, looping them back up the stack. - */ -#ifndef LWIP_NETIF_LOOPBACK -#define LWIP_NETIF_LOOPBACK 0 -#endif - -/** - * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback - * sending for each netif (0 = disabled) - */ -#ifndef LWIP_LOOPBACK_MAX_PBUFS -#define LWIP_LOOPBACK_MAX_PBUFS 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in - * the system, as netifs must change how they behave depending on this setting - * for the LWIP_NETIF_LOOPBACK option to work. - * Setting this is needed to avoid reentering non-reentrant functions like - * tcp_input(). - * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a - * multithreaded environment like tcpip.c. In this case, netif->input() - * is called directly. - * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. - * The packets are put on a list and netif_poll() must be called in - * the main application loop. - */ -#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING -#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) -#endif - -/** - * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data - * to be sent into one single pbuf. This is for compatibility with DMA-enabled - * MACs that do not support scatter-gather. - * Beware that this might involve CPU-memcpy before transmitting that would not - * be needed without this flag! Use this only if you need to! - * - * @todo: TCP and IP-frag do not work with this, yet: - */ -#ifndef LWIP_NETIF_TX_SINGLE_PBUF -#define LWIP_NETIF_TX_SINGLE_PBUF 0 -#endif /* LWIP_NETIF_TX_SINGLE_PBUF */ - -/* - ------------------------------------ - ---------- LOOPIF options ---------- - ------------------------------------ -*/ -/** - * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c - */ -#ifndef LWIP_HAVE_LOOPIF -#define LWIP_HAVE_LOOPIF 0 -#endif - -/* - ------------------------------------ - ---------- SLIPIF options ---------- - ------------------------------------ -*/ -/** - * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c - */ -#ifndef LWIP_HAVE_SLIPIF -#define LWIP_HAVE_SLIPIF 0 -#endif - -/* - ------------------------------------ - ---------- Thread options ---------- - ------------------------------------ -*/ -/** - * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. - */ -#ifndef TCPIP_THREAD_NAME -#define TCPIP_THREAD_NAME "tcpip_thread" -#endif - -/** - * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_STACKSIZE -#define TCPIP_THREAD_STACKSIZE 1024 -#endif - -/** - * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_PRIO -#define TCPIP_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when tcpip_init is called. - */ -#ifndef TCPIP_MBOX_SIZE -#define TCPIP_MBOX_SIZE MEMP_NUM_PBUF -#endif - -/** - * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. - */ -#ifndef SLIPIF_THREAD_NAME -#define SLIPIF_THREAD_NAME "slipif_loop" -#endif - -/** - * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_STACKSIZE -#define SLIPIF_THREAD_STACKSIZE 1024 -#endif - -/** - * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_PRIO -#define SLIPIF_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * PPP_THREAD_NAME: The name assigned to the pppInputThread. - */ -#ifndef PPP_THREAD_NAME -#define PPP_THREAD_NAME "pppInputThread" -#endif - -/** - * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_STACKSIZE -#define PPP_THREAD_STACKSIZE 1024 -#endif - -/** - * PPP_THREAD_PRIO: The priority assigned to the pppInputThread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_PRIO -#define PPP_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. - */ -#ifndef DEFAULT_THREAD_NAME -#define DEFAULT_THREAD_NAME "lwIP" -#endif - -/** - * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_STACKSIZE -#define DEFAULT_THREAD_STACKSIZE 1024 -#endif - -/** - * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_PRIO -#define DEFAULT_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_RAW_RECVMBOX_SIZE -#define DEFAULT_RAW_RECVMBOX_SIZE 4 -#endif - -/** - * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_UDP_RECVMBOX_SIZE -#define DEFAULT_UDP_RECVMBOX_SIZE 4 -#endif - -/** - * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_TCP_RECVMBOX_SIZE -#define DEFAULT_TCP_RECVMBOX_SIZE 40 -#endif - -/** - * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when the acceptmbox is created. - */ -#ifndef DEFAULT_ACCEPTMBOX_SIZE -#define DEFAULT_ACCEPTMBOX_SIZE 4 -#endif - -/* - ---------------------------------------------- - ---------- Sequential layer options ---------- - ---------------------------------------------- -*/ -/** - * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) - * Don't use it if you're not an active lwIP project member - */ -#ifndef LWIP_TCPIP_CORE_LOCKING -#define LWIP_TCPIP_CORE_LOCKING 0 -#endif - -/** - * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!) - * Don't use it if you're not an active lwIP project member - */ -#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT -#define LWIP_TCPIP_CORE_LOCKING_INPUT 0 -#endif - -/** - * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) - */ -#ifndef LWIP_NETCONN -#define LWIP_NETCONN 1 -#endif - -/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create - * timers running in tcpip_thread from another thread. - */ -#ifndef LWIP_TCPIP_TIMEOUT -#define LWIP_TCPIP_TIMEOUT 1 -#endif - -/* - ------------------------------------ - ---------- Socket options ---------- - ------------------------------------ -*/ -/** - * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) - */ -#ifndef LWIP_SOCKET -#define LWIP_SOCKET 1 -#endif - -/** - * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names. - * (only used if you use sockets.c) - */ -#ifndef LWIP_COMPAT_SOCKETS -#define LWIP_COMPAT_SOCKETS 1 -#endif - -/** - * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names. - * Disable this option if you use a POSIX operating system that uses the same - * names (read, write & close). (only used if you use sockets.c) - */ -#ifndef LWIP_POSIX_SOCKETS_IO_NAMES -#define LWIP_POSIX_SOCKETS_IO_NAMES 1 -#endif - -/** - * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT - * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set - * in seconds. (does not require sockets.c, and will affect tcp.c) - */ -#ifndef LWIP_TCP_KEEPALIVE -#define LWIP_TCP_KEEPALIVE 0 -#endif - -/** - * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and - * SO_SNDTIMEO processing. - */ -#ifndef LWIP_SO_SNDTIMEO -#define LWIP_SO_SNDTIMEO 0 -#endif - -/** - * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and - * SO_RCVTIMEO processing. - */ -#ifndef LWIP_SO_RCVTIMEO -#define LWIP_SO_RCVTIMEO 0 -#endif - -/** - * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. - */ -#ifndef LWIP_SO_RCVBUF -#define LWIP_SO_RCVBUF 0 -#endif - -/** - * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. - */ -#ifndef RECV_BUFSIZE_DEFAULT -#define RECV_BUFSIZE_DEFAULT INT_MAX -#endif - -/** - * SO_REUSE==1: Enable SO_REUSEADDR option. - */ -#ifndef SO_REUSE -#define SO_REUSE 0 -#endif - -/** - * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets - * to all local matches if SO_REUSEADDR is turned on. - * WARNING: Adds a memcpy for every packet if passing to more than one pcb! - */ -#ifndef SO_REUSE_RXTOALL -#define SO_REUSE_RXTOALL 0 -#endif - -/* - ---------------------------------------- - ---------- Statistics options ---------- - ---------------------------------------- -*/ -/** - * LWIP_STATS==1: Enable statistics collection in lwip_stats. - */ -#ifndef LWIP_STATS -#define LWIP_STATS 1 -#endif - -#if LWIP_STATS - -/** - * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. - */ -#ifndef LWIP_STATS_DISPLAY -#define LWIP_STATS_DISPLAY 0 -#endif - -/** - * LINK_STATS==1: Enable link stats. - */ -#ifndef LINK_STATS -#define LINK_STATS 1 -#endif - -/** - * ETHARP_STATS==1: Enable etharp stats. - */ -#ifndef ETHARP_STATS -#define ETHARP_STATS (LWIP_ARP) -#endif - -/** - * IP_STATS==1: Enable IP stats. - */ -#ifndef IP_STATS -#define IP_STATS 1 -#endif - -/** - * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is - * on if using either frag or reass. - */ -#ifndef IPFRAG_STATS -#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) -#endif - -/** - * ICMP_STATS==1: Enable ICMP stats. - */ -#ifndef ICMP_STATS -#define ICMP_STATS 1 -#endif - -/** - * IGMP_STATS==1: Enable IGMP stats. - */ -#ifndef IGMP_STATS -#define IGMP_STATS (LWIP_IGMP) -#endif - -/** - * UDP_STATS==1: Enable UDP stats. Default is on if - * UDP enabled, otherwise off. - */ -#ifndef UDP_STATS -#define UDP_STATS (LWIP_UDP) -#endif - -/** - * TCP_STATS==1: Enable TCP stats. Default is on if TCP - * enabled, otherwise off. - */ -#ifndef TCP_STATS -#define TCP_STATS (LWIP_TCP) -#endif - -/** - * MEM_STATS==1: Enable mem.c stats. - */ -#ifndef MEM_STATS -#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) -#endif - -/** - * MEMP_STATS==1: Enable memp.c pool stats. - */ -#ifndef MEMP_STATS -#define MEMP_STATS (MEMP_MEM_MALLOC == 0) -#endif - -/** - * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). - */ -#ifndef SYS_STATS -#define SYS_STATS (NO_SYS == 0) -#endif - -#else - -#define LINK_STATS 0 -#define IP_STATS 0 -#define IPFRAG_STATS 0 -#define ICMP_STATS 0 -#define IGMP_STATS 0 -#define UDP_STATS 0 -#define TCP_STATS 0 -#define MEM_STATS 0 -#define MEMP_STATS 0 -#define SYS_STATS 0 -#define LWIP_STATS_DISPLAY 0 - -#endif /* LWIP_STATS */ - -/* - --------------------------------- - ---------- PPP options ---------- - --------------------------------- -*/ -/** - * PPP_SUPPORT==1: Enable PPP. - */ -#ifndef PPP_SUPPORT -#define PPP_SUPPORT 0 -#endif - -/** - * PPPOE_SUPPORT==1: Enable PPP Over Ethernet - */ -#ifndef PPPOE_SUPPORT -#define PPPOE_SUPPORT 0 -#endif - -/** - * PPPOS_SUPPORT==1: Enable PPP Over Serial - */ -#ifndef PPPOS_SUPPORT -#define PPPOS_SUPPORT PPP_SUPPORT -#endif - -#if PPP_SUPPORT - -/** - * NUM_PPP: Max PPP sessions. - */ -#ifndef NUM_PPP -#define NUM_PPP 1 -#endif - -/** - * PAP_SUPPORT==1: Support PAP. - */ -#ifndef PAP_SUPPORT -#define PAP_SUPPORT 0 -#endif - -/** - * CHAP_SUPPORT==1: Support CHAP. - */ -#ifndef CHAP_SUPPORT -#define CHAP_SUPPORT 0 -#endif - -/** - * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef MSCHAP_SUPPORT -#define MSCHAP_SUPPORT 0 -#endif - -/** - * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CBCP_SUPPORT -#define CBCP_SUPPORT 0 -#endif - -/** - * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CCP_SUPPORT -#define CCP_SUPPORT 0 -#endif - -/** - * VJ_SUPPORT==1: Support VJ header compression. - */ -#ifndef VJ_SUPPORT -#define VJ_SUPPORT 0 -#endif - -/** - * MD5_SUPPORT==1: Support MD5 (see also CHAP). - */ -#ifndef MD5_SUPPORT -#define MD5_SUPPORT 0 -#endif - -/* - * Timeouts - */ -#ifndef FSM_DEFTIMEOUT -#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef FSM_DEFMAXTERMREQS -#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXCONFREQS -#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXNAKLOOPS -#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ -#endif - -#ifndef UPAP_DEFTIMEOUT -#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ -#endif - -#ifndef UPAP_DEFREQTIME -#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ -#endif - -#ifndef CHAP_DEFTIMEOUT -#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef CHAP_DEFTRANSMITS -#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ -#endif - -/* Interval in seconds between keepalive echo requests, 0 to disable. */ -#ifndef LCP_ECHOINTERVAL -#define LCP_ECHOINTERVAL 0 -#endif - -/* Number of unanswered echo requests before failure. */ -#ifndef LCP_MAXECHOFAILS -#define LCP_MAXECHOFAILS 3 -#endif - -/* Max Xmit idle time (in jiffies) before resend flag char. */ -#ifndef PPP_MAXIDLEFLAG -#define PPP_MAXIDLEFLAG 100 -#endif - -/* - * Packet sizes - * - * Note - lcp shouldn't be allowed to negotiate stuff outside these - * limits. See lcp.h in the pppd directory. - * (XXX - these constants should simply be shared by lcp.c instead - * of living in lcp.h) - */ -#define PPP_MTU 1500 /* Default MTU (size of Info field) */ -#ifndef PPP_MAXMTU -/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ -#define PPP_MAXMTU 1500 /* Largest MTU we allow */ -#endif -#define PPP_MINMTU 64 -#define PPP_MRU 1500 /* default MRU = max length of info field */ -#define PPP_MAXMRU 1500 /* Largest MRU we allow */ -#ifndef PPP_DEFMRU -#define PPP_DEFMRU 296 /* Try for this */ -#endif -#define PPP_MINMRU 128 /* No MRUs below this */ - -#ifndef MAXNAMELEN -#define MAXNAMELEN 256 /* max length of hostname or name for auth */ -#endif -#ifndef MAXSECRETLEN -#define MAXSECRETLEN 256 /* max length of password or secret */ -#endif - -#endif /* PPP_SUPPORT */ - -/* - -------------------------------------- - ---------- Checksum options ---------- - -------------------------------------- -*/ -/** - * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. - */ -#ifndef CHECKSUM_GEN_IP -#define CHECKSUM_GEN_IP 1 -#endif - -/** - * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. - */ -#ifndef CHECKSUM_GEN_UDP -#define CHECKSUM_GEN_UDP 1 -#endif - -/** - * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. - */ -#ifndef CHECKSUM_GEN_TCP -#define CHECKSUM_GEN_TCP 1 -#endif - -/** - * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets. - */ -#ifndef CHECKSUM_GEN_ICMP -#define CHECKSUM_GEN_ICMP 1 -#endif - -/** - * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. - */ -#ifndef CHECKSUM_CHECK_IP -#define CHECKSUM_CHECK_IP 1 -#endif - -/** - * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. - */ -#ifndef CHECKSUM_CHECK_UDP -#define CHECKSUM_CHECK_UDP 1 -#endif - -/** - * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. - */ -#ifndef CHECKSUM_CHECK_TCP -#define CHECKSUM_CHECK_TCP 1 -#endif - -/** - * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from - * application buffers to pbufs. - */ -#ifndef LWIP_CHECKSUM_ON_COPY -#define LWIP_CHECKSUM_ON_COPY 0 -#endif - -/* - --------------------------------------- - ---------- Hook options --------------- - --------------------------------------- -*/ - -/* Hooks are undefined by default, define them to a function if you need them. */ - -/** - * LWIP_HOOK_IP4_INPUT(pbuf, input_netif): - * - called from ip_input() (IPv4) - * - pbuf: received struct pbuf passed to ip_input() - * - input_netif: struct netif on which the packet has been received - * Return values: - * - 0: Hook has not consumed the packet, packet is processed as normal - * - != 0: Hook has consumed the packet. - * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook - * (i.e. free it when done). - */ - -/** - * LWIP_HOOK_IP4_ROUTE(dest): - * - called from ip_route() (IPv4) - * - dest: destination IPv4 address - * Returns the destination netif or NULL if no destination netif is found. In - * that case, ip_route() continues as normal. - */ - -/* - --------------------------------------- - ---------- Debugging options ---------- - --------------------------------------- -*/ -/** - * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is - * compared against this value. If it is smaller, then debugging - * messages are written. - */ -#ifndef LWIP_DBG_MIN_LEVEL -#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL -#endif - -/** - * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable - * debug messages of certain types. - */ -#ifndef LWIP_DBG_TYPES_ON -#define LWIP_DBG_TYPES_ON LWIP_DBG_OFF -#endif - -/** - * ETHARP_DEBUG: Enable debugging in etharp.c. - */ -#ifndef ETHARP_DEBUG -#define ETHARP_DEBUG LWIP_DBG_OFF -#endif - -/** - * NETIF_DEBUG: Enable debugging in netif.c. - */ -#ifndef NETIF_DEBUG -#define NETIF_DEBUG LWIP_DBG_OFF -#endif - -/** - * PBUF_DEBUG: Enable debugging in pbuf.c. - */ -#ifndef PBUF_DEBUG -#define PBUF_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_LIB_DEBUG: Enable debugging in api_lib.c. - */ -#ifndef API_LIB_DEBUG -#define API_LIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_MSG_DEBUG: Enable debugging in api_msg.c. - */ -#ifndef API_MSG_DEBUG -#define API_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SOCKETS_DEBUG: Enable debugging in sockets.c. - */ -#ifndef SOCKETS_DEBUG -#define SOCKETS_DEBUG LWIP_DBG_OFF -#endif - -/** - * ICMP_DEBUG: Enable debugging in icmp.c. - */ -#ifndef ICMP_DEBUG -#define ICMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IGMP_DEBUG: Enable debugging in igmp.c. - */ -#ifndef IGMP_DEBUG -#define IGMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * INET_DEBUG: Enable debugging in inet.c. - */ -#ifndef INET_DEBUG -#define INET_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_DEBUG: Enable debugging for IP. - */ -#ifndef IP_DEBUG -#define IP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. - */ -#ifndef IP_REASS_DEBUG -#define IP_REASS_DEBUG LWIP_DBG_OFF -#endif - -/** - * RAW_DEBUG: Enable debugging in raw.c. - */ -#ifndef RAW_DEBUG -#define RAW_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEM_DEBUG: Enable debugging in mem.c. - */ -#ifndef MEM_DEBUG -#define MEM_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEMP_DEBUG: Enable debugging in memp.c. - */ -#ifndef MEMP_DEBUG -#define MEMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SYS_DEBUG: Enable debugging in sys.c. - */ -#ifndef SYS_DEBUG -#define SYS_DEBUG LWIP_DBG_OFF -#endif - -/** - * TIMERS_DEBUG: Enable debugging in timers.c. - */ -#ifndef TIMERS_DEBUG -#define TIMERS_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_DEBUG: Enable debugging for TCP. - */ -#ifndef TCP_DEBUG -#define TCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. - */ -#ifndef TCP_INPUT_DEBUG -#define TCP_INPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. - */ -#ifndef TCP_FR_DEBUG -#define TCP_FR_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit - * timeout. - */ -#ifndef TCP_RTO_DEBUG -#define TCP_RTO_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. - */ -#ifndef TCP_CWND_DEBUG -#define TCP_CWND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. - */ -#ifndef TCP_WND_DEBUG -#define TCP_WND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. - */ -#ifndef TCP_OUTPUT_DEBUG -#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. - */ -#ifndef TCP_RST_DEBUG -#define TCP_RST_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. - */ -#ifndef TCP_QLEN_DEBUG -#define TCP_QLEN_DEBUG LWIP_DBG_OFF -#endif - -/** - * UDP_DEBUG: Enable debugging in UDP. - */ -#ifndef UDP_DEBUG -#define UDP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCPIP_DEBUG: Enable debugging in tcpip.c. - */ -#ifndef TCPIP_DEBUG -#define TCPIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * PPP_DEBUG: Enable debugging for PPP. - */ -#ifndef PPP_DEBUG -#define PPP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SLIP_DEBUG: Enable debugging in slipif.c. - */ -#ifndef SLIP_DEBUG -#define SLIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * DHCP_DEBUG: Enable debugging in dhcp.c. - */ -#ifndef DHCP_DEBUG -#define DHCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * AUTOIP_DEBUG: Enable debugging in autoip.c. - */ -#ifndef AUTOIP_DEBUG -#define AUTOIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. - */ -#ifndef SNMP_MSG_DEBUG -#define SNMP_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. - */ -#ifndef SNMP_MIB_DEBUG -#define SNMP_MIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * DNS_DEBUG: Enable debugging for DNS. - */ -#ifndef DNS_DEBUG -#define DNS_DEBUG LWIP_DBG_OFF -#endif - -#endif /* __LWIPOPT_H__ */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c deleted file mode 100644 index 83523b1..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "lwipthread.h" -#include "web/web.h" - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - * - lwIP subsystem initialization using the default configuration. - */ - halInit(); - chSysInit(); - lwipInit(NULL); - - /* - * Start the serial driver with the default configuration. - * Used for debug output of LwIP. - */ - sdStart(&SD1, NULL); - - /* - * Creates the HTTP thread (it changes priority internally). - */ - chThdCreateStatic(wa_http_server, sizeof(wa_http_server), NORMALPRIO + 1, - http_server, NULL); - - while (1) { - osalThreadSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h deleted file mode 100644 index 3abab92..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C129x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C129x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_MOSC_SINGLE_ENDED FALSE -#define TIVA_RSCLKCFG_OSCSRC RSCLKCFG_OSCSRC_MOSC - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_GPT6 FALSE -#define TIVA_GPT_USE_GPT7 FALSE -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_USE_I2C8 FALSE -#define TIVA_I2C_USE_I2C9 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER FALSE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c deleted file mode 100644 index 8d0d281..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file is a modified version of the lwIP web server demo. The original - * author is unknown because the file didn't contain any license information. - */ - -/** - * @file web.c - * @brief HTTP server wrapper thread code. - * @addtogroup WEB_THREAD - * @{ - */ - -#include "ch.h" - -#include "lwip/opt.h" -#include "lwip/arch.h" -#include "lwip/api.h" - -#include "web.h" - -#if LWIP_NETCONN - -static const char http_html_hdr[] = "HTTP/1.1 200 OK\r\nContent-type: text/html\r\n\r\n"; -static const char http_index_html[] = "Congrats!

Welcome to our lwIP HTTP server!

This is a small test page."; - -static void http_server_serve(struct netconn *conn) { - struct netbuf *inbuf; - char *buf; - u16_t buflen; - err_t err; - - /* Read the data from the port, blocking if nothing yet there. - We assume the request (the part we care about) is in one netbuf */ - err = netconn_recv(conn, &inbuf); - - if (err == ERR_OK) { - netbuf_data(inbuf, (void **)&buf, &buflen); - - /* Is this an HTTP GET command? (only check the first 5 chars, since - there are other formats for GET, and we're keeping it very simple )*/ - if (buflen>=5 && - buf[0]=='G' && - buf[1]=='E' && - buf[2]=='T' && - buf[3]==' ' && - buf[4]=='/' ) { - - /* Send the HTML header - * subtract 1 from the size, since we dont send the \0 in the string - * NETCONN_NOCOPY: our data is const static, so no need to copy it - */ - netconn_write(conn, http_html_hdr, sizeof(http_html_hdr)-1, NETCONN_NOCOPY); - - /* Send our HTML page */ - netconn_write(conn, http_index_html, sizeof(http_index_html)-1, NETCONN_NOCOPY); - } - } - /* Close the connection (server closes in HTTP) */ - netconn_close(conn); - - /* Delete the buffer (netconn_recv gives us ownership, - so we have to make sure to deallocate the buffer) */ - netbuf_delete(inbuf); -} - -/** - * Stack area for the http thread. - */ -THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE); - -/** - * HTTP server thread. - */ -THD_FUNCTION(http_server, p) { - struct netconn *conn, *newconn; - err_t err; - - (void)p; - - /* Create a new TCP connection handle */ - conn = netconn_new(NETCONN_TCP); - LWIP_ERROR("http_server: invalid conn", (conn != NULL), return;); - - /* Bind to port 80 (HTTP) with default IP address */ - netconn_bind(conn, NULL, WEB_THREAD_PORT); - - /* Put the connection into LISTEN state */ - netconn_listen(conn); - - /* Goes to the final priority after initialization.*/ - chThdSetPriority(WEB_THREAD_PRIORITY); - - while(1) { - err = netconn_accept(conn, &newconn); - if (err != ERR_OK) - continue; - http_server_serve(newconn); - netconn_delete(newconn); - } -} - -#endif /* LWIP_NETCONN */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h deleted file mode 100644 index 106dc26..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file web.h - * @brief HTTP server wrapper thread macros and structures. - * @addtogroup WEB_THREAD - * @{ - */ - -#ifndef _WEB_H_ -#define _WEB_H_ - -#ifndef WEB_THREAD_STACK_SIZE -#define WEB_THREAD_STACK_SIZE 1024 -#endif - -#ifndef WEB_THREAD_PORT -#define WEB_THREAD_PORT 80 -#endif - -#ifndef WEB_THREAD_PRIORITY -#define WEB_THREAD_PRIORITY (LOWPRIO + 2) -#endif - -extern THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE); - -#ifdef __cplusplus -extern "C" { -#endif - THD_FUNCTION(http_server, p); -#ifdef __cplusplus -} -#endif - -#endif /* _WEB_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject deleted file mode 100644 index dff1605..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project deleted file mode 100644 index 09271d4..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project +++ /dev/null @@ -1,54 +0,0 @@ - - - RT-TM4C1294-LAUNCHPAD - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD - - - community_os - 2 - CHIBIOS3/community/os - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile deleted file mode 100644 index 63815df..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h deleted file mode 100644 index 15db44a..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 120000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h deleted file mode 100644 index cd6edf3..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c deleted file mode 100644 index 5184e3e..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -typedef struct led_config -{ - ioportid_t port; - uint32_t sleep; - uint8_t pin; -} led_config_t; - -/* - * LED blinker thread. - */ -static THD_WORKING_AREA(waBlinkLed1, 128); -static THD_WORKING_AREA(waBlinkLed2, 128); -static THD_WORKING_AREA(waBlinkLed3, 128); -static THD_WORKING_AREA(waBlinkLed4, 128); -static THD_FUNCTION(blinkLed, arg) { - led_config_t *ledConfig = (led_config_t*) arg; - - chRegSetThreadName("Blinker"); - - /* Configure pin as push-pull output.*/ - palSetPadMode(ledConfig->port, ledConfig->pin, PAL_MODE_OUTPUT_PUSHPULL); - - while (TRUE) { - chThdSleepMilliseconds(ledConfig->sleep); - palTogglePad(ledConfig->port, ledConfig->pin); - } -} - -/* - * Application entry point. - */ -int main(void) -{ - led_config_t led1, led2, led3, led4; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* Configure RX and TX pins for UART0.*/ - palSetPadMode(GPIOA, GPIOA_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - palSetPadMode(GPIOA, GPIOA_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - - /* Start the serial driver with the default configuration.*/ - sdStart(&SD1, NULL); - - if (!palReadPad(GPIOJ, GPIOJ_SW1)) { - test_execute((BaseSequentialStream *)&SD1); - } - - led1.port = GPIOF; - led1.pin = GPIOF_LED0; - led1.sleep = 100; - - led2.port = GPIOF; - led2.pin = GPIOF_LED1; - led2.sleep = 101; - - led3.port = GPION; - led3.pin = GPION_LED2; - led3.sleep = 102; - - led4.port = GPION; - led4.pin = GPION_LED3; - led4.sleep = 103; - - /* Creating the blinker threads.*/ - chThdCreateStatic(waBlinkLed1, sizeof(waBlinkLed1), NORMALPRIO, blinkLed, - &led1); - - chThdCreateStatic(waBlinkLed2, sizeof(waBlinkLed2), NORMALPRIO, blinkLed, - &led2); - - chThdCreateStatic(waBlinkLed3, sizeof(waBlinkLed3), NORMALPRIO, blinkLed, - &led3); - - chThdCreateStatic(waBlinkLed4, sizeof(waBlinkLed4), NORMALPRIO, blinkLed, - &led4); - - /* - * Normal main() thread activity - */ - while (TRUE) { - chThdSleepMilliseconds(100); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h deleted file mode 100644 index 3abab92..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C129x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C129x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_MOSC_SINGLE_ENDED FALSE -#define TIVA_RSCLKCFG_OSCSRC RSCLKCFG_OSCSRC_MOSC - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_GPT6 FALSE -#define TIVA_GPT_USE_GPT7 FALSE -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_USE_I2C8 FALSE -#define TIVA_I2C_USE_I2C9 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER FALSE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.cproject b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.cproject deleted file mode 100644 index f7198ab..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.gitignore b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.gitignore deleted file mode 100644 index dfbbe17..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.gitignore +++ /dev/null @@ -1,9 +0,0 @@ -*.origin -*.swp -*~ -.dep -build -*.o -*.exe -*.lst -*.map \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.project b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.project deleted file mode 100644 index 1e168ca..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - RT-Win32-TRIBUF - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/simulator - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/Makefile b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/Makefile deleted file mode 100644 index 0ed677e..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/Makefile +++ /dev/null @@ -1,152 +0,0 @@ -# -# !!!! Do NOT edit this makefile with an editor which replace tabs by spaces !!!! -# -############################################################################################## -# -# On command line: -# -# make all = Create project -# -# make clean = Clean project files. -# -# To rebuild project do "make clean" and "make all". -# - -############################################################################################## -# Start of default section -# - -TRGT = mingw32- -CC = $(TRGT)gcc -AS = $(TRGT)gcc -x assembler-with-cpp - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DSIMULATOR - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = -lws2_32 - -# -# End of default section -############################################################################################## - -############################################################################################## -# Start of user section -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT = - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# Imported source files -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -include $(CHIBIOS)/os/hal/boards/simulator/board.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/simulator/win32/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/ports/SIMIA32/compilers/GCC/port.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/test/rt/test.mk - -# List C source files here -SRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS_CONTRIB)/os/various/tribuf.c \ - main.c \ - # eol - -# List ASM source files here -ASRC = - -# List all user directories here -UINCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS_CONTRIB)/os/various/ \ - # eol - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# Define optimisation level here -OPT = -ggdb -O2 - -# -# End of user defines -############################################################################################## - -INCDIR = $(patsubst %,-I%,$(DINCDIR) $(UINCDIR)) -LIBDIR = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR)) -DEFS = $(DDEFS) $(UDEFS) -ADEFS = $(DADEFS) $(UADEFS) -OBJS = $(ASRC:.s=.o) $(SRC:.c=.o) -LIBS = $(DLIBS) $(ULIBS) - -LDFLAGS = -Wl,-Map=$(PROJECT).map,--cref,--no-warn-mismatch $(LIBDIR) -ASFLAGS = -Wa,-amhls=$(<:.s=.lst) $(ADEFS) -CPFLAGS = -Wall -Wextra -Wundef -Wstrict-prototypes -fverbose-asm -Wa,-alms=$(<:.c=.lst) $(DEFS) - -# Generate dependency information -CPFLAGS += -MD -MP -MF .dep/$(@F).d - -# -# makefile rules -# - -all: $(OBJS) $(PROJECT).exe - -%.o : %.c - $(CC) -c $(OPT) $(CPFLAGS) -I . $(INCDIR) $< -o $@ - -%.o : %.s - $(AS) -c $(OPT) $(ASFLAGS) $< -o $@ - -%exe: $(OBJS) - $(CC) $(OPT) $(OBJS) $(LDFLAGS) $(LIBS) -o $@ - -gcov: - -mkdir gcov - $(COV) -u $(subst /,\,$(SRC)) - -mv *.gcov ./gcov - -clean: - -rm -f $(OBJS) - -rm -f $(PROJECT).exe - -rm -f $(PROJECT).map - -rm -f $(SRC:.c=.c.bak) - -rm -f $(SRC:.c=.lst) - -rm -f $(ASRC:.s=.s.bak) - -rm -f $(ASRC:.s=.lst) - -rm -fR .dep - -# -# Include the dependency files, should be the last of the makefile -# --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - -# *** EOF *** diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/chconf.h b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/chconf.h deleted file mode 100644 index 835d59b..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/chconf.h +++ /dev/null @@ -1,502 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0x20000 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES FALSE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS FALSE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS FALSE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES FALSE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES FALSE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES FALSE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ - halt(reason); \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -void halt(const char *reason); - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/halconf.h b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/halconf.h deleted file mode 100644 index 286864b..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/halconf.h +++ /dev/null @@ -1,326 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -/*#include "mcuconf.h"*/ - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL FALSE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 32 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/main.c b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/main.c deleted file mode 100644 index bab25cd..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/main.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - Copyright (C) 2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "tribuf.h" - -#include -#include - -/*===========================================================================*/ -/* TriBuf related. */ -/*===========================================================================*/ - -#define WRITER_DELAY_MS 10 -#define READER_DELAY_MS 20 - -#define WRITER_STACK_SIZE 4096 -#define READER_STACK_SIZE 4096 - -#define WRITER_PRIORITY (NORMALPRIO + 1) -#define READER_PRIORITY (NORMALPRIO + 2) - -static thread_t *writertp; -static thread_t *readertp; - -static tribuf_t tribuf; -static char buffers[3]; - -static const char text[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ\r\n"; - -/* - * Reads from the front buffer. - */ -static char read_front(void) { - - const char *front; - msg_t error; - - /* Wait until a new front buffer gets available with prepared data */ - error = tribufWaitReadyTimeout(&tribuf, MS2ST(1000)); - if (error == MSG_TIMEOUT) - chSysHalt("ERROR: read_front() timed out"); - - /* Retrieve the new front buffer */ - tribufSwapFront(&tribuf); - front = (const char *)tribufGetFront(&tribuf); - - /* Read data from the new front buffer */ - return front[0]; -} - -/* - * Overwrites the back buffer with the provided character. - */ -static void write_back(char c) { - - char *back; - - /* Retrieve the current back buffer */ - back = (char *)tribufGetBack(&tribuf); - - /* Prepare data onto the current back buffer */ - back[0] = c; - - /* Exchange the prepared buffer with a new one */ - tribufSwapBack(&tribuf); -} - -/* - * Overwrites the back buffer with a fixed text, character by character. - */ -static THD_WORKING_AREA(writer_wa, WRITER_STACK_SIZE); -static THD_FUNCTION(writer_thread, arg) { - - const uint32_t delay = (uint32_t)(msg_t)arg; - size_t i; - char c; - - chRegSetThreadName("writer_thread"); - for (;;) { - for (i = 0; i < sizeof(text); ++i) { - c = text[i]; - write_back(c); - chThdSleepMilliseconds(delay); - } - } -} - -/* - * Reads the front buffer and prints it. - */ -static THD_WORKING_AREA(reader_wa, READER_STACK_SIZE); -static THD_FUNCTION(reader_thread, arg) { - - const uint32_t delay = (uint32_t)(msg_t)arg; - char c; - - chRegSetThreadName("reader_thread"); - for (;;) { - c = read_front(); - fprintf(stdout, "%c", c); - chThdSleepMilliseconds(delay); - } -} - -/*===========================================================================*/ -/* Initialization and main thread. */ -/*===========================================================================*/ - -/* - * Simulator main. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Writer and reader threads started for triple buffer demo. - */ - tribufObjectInit(&tribuf, &buffers[0], &buffers[1], &buffers[2]); - - readertp = chThdCreateStatic(reader_wa, sizeof(reader_wa), - READER_PRIORITY, - reader_thread, (void *)READER_DELAY_MS); - - writertp = chThdCreateStatic(writer_wa, sizeof(writer_wa), - WRITER_PRIORITY, - writer_thread, (void *)WRITER_DELAY_MS); - - /* - * Let the threads process data. - */ - for (;;) - chThdSleepMilliseconds(1000); - - return 0; -} - -/* - * Critical error function. - */ -void halt(const char *reason) { - - fflush(stdout); - fputs("\n", stdout); - fputs(reason, stderr); - fflush(stderr); - exit(1); -} diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/readme.txt b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/readme.txt deleted file mode 100644 index e72e2e0..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/readme.txt +++ /dev/null @@ -1,33 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for x86 into a Win32 process ** -***************************************************************************** - -** TARGET ** - -The demo runs under any Windows version as an application program. The serial -I/O is simulated over TCP/IP sockets. - -** The Demo ** - -The demo listens on the two serial ports, when a connection is detected a -thread is started that serves a small command shell. -The demo shows how to create/terminate threads at runtime, how to listen to -events, how to work with serial ports, how to use the messages. -You can develop your ChibiOS/RT application using this demo as a simulator -then you can recompile it for a different architecture. -See demo.c for details. - -** Build Procedure ** - -The demo was built using the MinGW toolchain. - -** Connect to the demo ** - -In order to connect to the demo a telnet client is required. A good choice -is PuTTY: - -http://www.putty.org/ - -Host Name: 127.0.0.1 -Port: 29001 and/or 29002 -Connection Type: Raw diff --git a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/run.bat b/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/run.bat deleted file mode 100644 index 5d697c5..0000000 --- a/ChibiOS_16.1.5/community/demos/various/RT-Win32-TriBuf/run.bat +++ /dev/null @@ -1,2 +0,0 @@ -ch.exe -PAUSE diff --git a/ChibiOS_16.1.5/community/os/.keep b/ChibiOS_16.1.5/community/os/.keep deleted file mode 100644 index e69de29..0000000 diff --git a/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x5.h b/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x5.h deleted file mode 100644 index c309f04..0000000 --- a/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x5.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2014-2016 Fabio Utzig, http://fabioutzig.com - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#ifndef _K20x5_H_ -#define _K20x5_H_ - -/* - * ============================================================== - * ---------- Interrupt Number Definition ----------------------- - * ============================================================== - */ -typedef enum IRQn -{ -/****** Cortex-M0 Processor Exceptions Numbers ****************/ - InitialSP_IRQn = -15, - InitialPC_IRQn = -15, - NonMaskableInt_IRQn = -14, - HardFault_IRQn = -13, - MemoryManagement_IRQn = -12, - BusFault_IRQn = -11, - UsageFault_IRQn = -10, - SVCall_IRQn = -5, - DebugMonitor_IRQn = -4, - PendSV_IRQn = -2, - SysTick_IRQn = -1, - -/****** K20x Specific Interrupt Numbers ***********************/ - DMA0_IRQn = 0, // Vector40 - DMA1_IRQn = 1, // Vector44 - DMA2_IRQn = 2, // Vector48 - DMA3_IRQn = 3, // Vector4C - DMAError_IRQn = 4, // Vector50 - DMA_IRQn = 5, // Vector54 - FlashMemComplete_IRQn = 6, // Vector58 - FlashMemReadCollision_IRQn = 7, // Vector5C - LowVoltageWarning_IRQn = 8, // Vector60 - LLWU_IRQn = 9, // Vector64 - WDOG_IRQn = 10, // Vector68 - I2C0_IRQn = 11, // Vector6C - SPI0_IRQn = 12, // Vector70 - I2S0_IRQn = 13, // Vector74 - I2S1_IRQn = 14, // Vector78 - UART0LON_IRQn = 15, // Vector7C - UART0Status_IRQn = 16, // Vector80 - UART0Error_IRQn = 17, // Vector84 - UART1Status_IRQn = 18, // Vector88 - UART1Error_IRQn = 19, // Vector8C - UART2Status_IRQn = 20, // Vector90 - UART2Error_IRQn = 21, // Vector94 - ADC0_IRQn = 22, // Vector98 - CMP0_IRQn = 23, // Vector9C - CMP1_IRQn = 24, // VectorA0 - FTM0_IRQn = 25, // VectorA4 - FTM1_IRQn = 26, // VectorA8 - CMT_IRQn = 27, // VectorAC - RTCAlarm_IRQn = 28, // VectorB0 - RTCSeconds_IRQn = 29, // VectorB4 - PITChannel0_IRQn = 30, // VectorB8 - PITChannel1_IRQn = 31, // VectorBC - PITChannel2_IRQn = 32, // VectorC0 - PITChannel3_IRQn = 33, // VectorC4 - PDB_IRQn = 34, // VectorC8 - USB_OTG_IRQn = 35, // VectorCC - USBChargerDetect_IRQn = 36, // VectorD0 - TSI_IRQn = 37, // VectorD4 - MCG_IRQn = 38, // VectorD8 - LPTMR0_IRQn = 39, // VectorDC - PINA_IRQn = 40, // VectorE0 - PINB_IRQn = 41, // VectorE4 - PINC_IRQn = 42, // VectorE8 - PIND_IRQn = 43, // VectorEC - PINE_IRQn = 44, // VectorF0 - SoftInitInt_IRQn = 45, // VectorF4 -} IRQn_Type; - -/* - * ========================================================================== - * ----------- Processor and Core Peripheral Section ------------------------ - * ========================================================================== - */ - -/** - * @brief K20x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -#define __FPU_PRESENT 0 -#define __MPU_PRESENT 0 -#define __NVIC_PRIO_BITS 4 -#define __Vendor_SysTickConfig 0 - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ - -#include "k20xx.h" - -typedef struct -{ - __IO uint32_t SOPT1; - __IO uint32_t SOPT1CFG; - uint32_t RESERVED0[1023]; - __IO uint32_t SOPT2; - uint32_t RESERVED1[1]; - __IO uint32_t SOPT4; - __IO uint32_t SOPT5; - uint32_t RESERVED2[1]; - __IO uint32_t SOPT7; - uint32_t RESERVED3[2]; - __I uint32_t SDID; - uint32_t RESERVED4[3]; - __IO uint32_t SCGC4; - __IO uint32_t SCGC5; - __IO uint32_t SCGC6; - __IO uint32_t SCGC7; - __IO uint32_t CLKDIV1; - __IO uint32_t CLKDIV2; - __I uint32_t FCFG1; - __I uint32_t FCFG2; - __I uint32_t UIDH; - __I uint32_t UIDMH; - __I uint32_t UIDML; - __I uint32_t UIDL; -} SIM_TypeDef; - -/****************************************************************/ -/* Peripheral memory map */ -/****************************************************************/ -#define DMA_BASE ((uint32_t)0x40008000) -#define FTFL_BASE ((uint32_t)0x40020000) -#define DMAMUX_BASE ((uint32_t)0x40021000) -#define SPI0_BASE ((uint32_t)0x4002C000) -#define PIT_BASE ((uint32_t)0x40037000) -#define FTM0_BASE ((uint32_t)0x40038000) -#define FTM1_BASE ((uint32_t)0x40039000) -#define ADC0_BASE ((uint32_t)0x4003B000) -#define VBAT_BASE ((uint32_t)0x4003E000) -#define LPTMR0_BASE ((uint32_t)0x40040000) -#define SRF_BASE ((uint32_t)0x40041000) -#define TSI0_BASE ((uint32_t)0x40045000) -#define SIM_BASE ((uint32_t)0x40047000) -#define PORTA_BASE ((uint32_t)0x40049000) -#define PORTB_BASE ((uint32_t)0x4004A000) -#define PORTC_BASE ((uint32_t)0x4004B000) -#define PORTD_BASE ((uint32_t)0x4004C000) -#define PORTE_BASE ((uint32_t)0x4004D000) -#define WDOG_BASE ((uint32_t)0x40052000) -#define MCG_BASE ((uint32_t)0x40064000) -#define OSC0_BASE ((uint32_t)0x40065000) -#define I2C0_BASE ((uint32_t)0x40066000) -#define UART0_BASE ((uint32_t)0x4006A000) -#define UART1_BASE ((uint32_t)0x4006B000) -#define UART2_BASE ((uint32_t)0x4006C000) -#define USBOTG_BASE ((uint32_t)0x40072000) -#define LLWU_BASE ((uint32_t)0x4007C000) -#define PMC_BASE ((uint32_t)0x4007D000) -#define GPIOA_BASE ((uint32_t)0x400FF000) -#define GPIOB_BASE ((uint32_t)0x400FF040) -#define GPIOC_BASE ((uint32_t)0x400FF080) -#define GPIOD_BASE ((uint32_t)0x400FF0C0) -#define GPIOE_BASE ((uint32_t)0x400FF100) - -/****************************************************************/ -/* Peripheral declaration */ -/****************************************************************/ -#define DMA ((DMA_TypeDef *) DMA_BASE) -#define FTFL ((FTFL_TypeDef *) FTFL_BASE) -#define DMAMUX ((DMAMUX_TypeDef *) DMAMUX_BASE) -#define PIT ((PIT_TypeDef *) PIT_BASE) -#define FTM0 ((FTM_TypeDef *) FTM0_BASE) -#define FTM1 ((FTM_TypeDef *) FTM1_BASE) -#define ADC0 ((ADC_TypeDef *) ADC0_BASE) -#define VBAT ((volatile uint8_t *)VBAT_BASE) /* 32 bytes */ -#define LPTMR0 ((LPTMR_TypeDef *) LPTMR0_BASE) -#define SYSTEM_REGISTER_FILE ((volatile uint8_t *)SRF_BASE) /* 32 bytes */ -#define TSI0 ((TSI_TypeDef *) TSI0_BASE) -#define SIM ((SIM_TypeDef *) SIM_BASE) -#define LLWU ((LLWU_TypeDef *) LLWU_BASE) -#define PMC ((PMC_TypeDef *) PMC_BASE) -#define PORTA ((PORT_TypeDef *) PORTA_BASE) -#define PORTB ((PORT_TypeDef *) PORTB_BASE) -#define PORTC ((PORT_TypeDef *) PORTC_BASE) -#define PORTD ((PORT_TypeDef *) PORTD_BASE) -#define PORTE ((PORT_TypeDef *) PORTE_BASE) -#define WDOG ((WDOG_TypeDef *) WDOG_BASE) -#define USB0 ((USBOTG_TypeDef *) USBOTG_BASE) -#define MCG ((MCG_TypeDef *) MCG_BASE) -#define OSC0 ((OSC_TypeDef *) OSC0_BASE) -#define SPI0 ((SPI_TypeDef *) SPI0_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define UART0 ((UART_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) - -/****************************************************************/ -/* Peripheral Registers Bits Definition */ -/****************************************************************/ - -/****************************************************************/ -/* */ -/* System Integration Module (SIM) */ -/* */ -/****************************************************************/ -/********* Bits definition for SIM_SOPT1 register *************/ -#define SIM_SOPT1_USBREGEN ((uint32_t)0x80000000) /*!< USB voltage regulator enable */ -#define SIM_SOPT1_USBSSTBY ((uint32_t)0x40000000) /*!< USB voltage regulator in standby mode during Stop, VLPS, LLS and VLLS modes */ -#define SIM_SOPT1_USBVSTBY ((uint32_t)0x20000000) /*!< USB voltage regulator in standby mode during VLPR and VLPW modes */ -#define SIM_SOPT1_OSC32KSEL_SHIFT 18 /*!< 32K oscillator clock select (shift) */ -#define SIM_SOPT1_OSC32KSEL_MASK ((uint32_t)((uint32_t)0x3 << SIM_SOPT1_OSC32KSEL_SHIFT)) /*!< 32K oscillator clock select (mask) */ -#define SIM_SOPT1_OSC32KSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_OSC32KSEL_SHIFT) & SIM_SOPT1_OSC32KSEL_MASK)) /*!< 32K oscillator clock select */ -#define SIM_SOPT1_RAMSIZE_SHIFT 12 -#define SIM_SOPT1_RAMSIZE_MASK ((uint32_t)((uint32_t)0xf << SIM_SOPT1_RAMSIZE_SHIFT)) -#define SIM_SOPT1_RAMSIZE(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_RAMSIZE_SHIFT) & SIM_SOPT1_RAMSIZE_MASK)) - -/******* Bits definition for SIM_SOPT1CFG register ************/ -#define SIM_SOPT1CFG_USSWE ((uint32_t)0x04000000) /*!< USB voltage regulator stop standby write enable */ -#define SIM_SOPT1CFG_UVSWE ((uint32_t)0x02000000) /*!< USB voltage regulator VLP standby write enable */ -#define SIM_SOPT1CFG_URWE ((uint32_t)0x01000000) /*!< USB voltage regulator voltage regulator write enable */ - -/******* Bits definition for SIM_SOPT2 register ************/ -#define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) /*!< USB clock source select */ -#define SIM_SOPT2_PLLFLLSEL ((uint32_t)0x00010000) /*!< PLL/FLL clock select */ -#define SIM_SOPT2_TRACECLKSEL ((uint32_t)0x00001000) -#define SIM_SOPT2_PTD7PAD ((uint32_t)0x00000800) -#define SIM_SOPT2_CLKOUTSEL_SHIFT 5 -#define SIM_SOPT2_CLKOUTSEL_MASK ((uint32_t)((uint32_t)0x7 << SIM_SOPT2_CLKOUTSEL_SHIFT)) -#define SIM_SOPT2_CLKOUTSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_CLKOUTSEL_SHIFT) & SIM_SOPT2_CLKOUTSEL_MASK)) -#define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) /*!< RTC clock out select */ - -/******* Bits definition for SIM_SCGC4 register ************/ -#define SIM_SCGC4_VREF ((uint32_t)0x00100000) /*!< VREF Clock Gate Control */ -#define SIM_SCGC4_CMP ((uint32_t)0x00080000) /*!< Comparator Clock Gate Control */ -#define SIM_SCGC4_USBOTG ((uint32_t)0x00040000) /*!< USB Clock Gate Control */ -#define SIM_SCGC4_UART2 ((uint32_t)0x00001000) /*!< UART2 Clock Gate Control */ -#define SIM_SCGC4_UART1 ((uint32_t)0x00000800) /*!< UART1 Clock Gate Control */ -#define SIM_SCGC4_UART0 ((uint32_t)0x00000400) /*!< UART0 Clock Gate Control */ -#define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) /*!< I2C0 Clock Gate Control */ -#define SIM_SCGC4_CMT ((uint32_t)0x00000004) /*!< CMT Clock Gate Control */ -#define SIM_SCGC4_EMW ((uint32_t)0x00000002) /*!< EWM Clock Gate Control */ - -/******* Bits definition for SIM_SCGC5 register ************/ -#define SIM_SCGC5_PORTE ((uint32_t)0x00002000) /*!< Port E Clock Gate Control */ -#define SIM_SCGC5_PORTD ((uint32_t)0x00001000) /*!< Port D Clock Gate Control */ -#define SIM_SCGC5_PORTC ((uint32_t)0x00000800) /*!< Port C Clock Gate Control */ -#define SIM_SCGC5_PORTB ((uint32_t)0x00000400) /*!< Port B Clock Gate Control */ -#define SIM_SCGC5_PORTA ((uint32_t)0x00000200) /*!< Port A Clock Gate Control */ -#define SIM_SCGC5_TSI ((uint32_t)0x00000020) /*!< TSI Access Control */ -#define SIM_SCGC5_LPTIMER ((uint32_t)0x00000001) /*!< Low Power Timer Access Control */ - -/******* Bits definition for SIM_SCGC6 register ************/ -#define SIM_SCGC6_RTC ((uint32_t)0x20000000) /*!< RTC Access Control */ -#define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) /*!< ADC0 Clock Gate Control */ -#define SIM_SCGC6_FTM1 ((uint32_t)0x02000000) /*!< FTM1 Clock Gate Control */ -#define SIM_SCGC6_FTM0 ((uint32_t)0x01000000) /*!< FTM0 Clock Gate Control */ -#define SIM_SCGC6_PIT ((uint32_t)0x00800000) /*!< PIT Clock Gate Control */ -#define SIM_SCGC6_PDB ((uint32_t)0x00400000) /*!< PDB Clock Gate Control */ -#define SIM_SCGC6_USBDCD ((uint32_t)0x00200000) /*!< USB DCD Clock Gate Control */ -#define SIM_SCGC6_CRC ((uint32_t)0x00040000) /*!< Low Power Timer Access Control */ -#define SIM_SCGC6_I2S ((uint32_t)0x00008000) /*!< CRC Clock Gate Control */ -#define SIM_SCGC6_SPI0 ((uint32_t)0x00001000) /*!< SPI0 Clock Gate Control */ -#define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) /*!< DMA Mux Clock Gate Control */ -#define SIM_SCGC6_FTFL ((uint32_t)0x00000001) /*!< Flash Memory Clock Gate Control */ - -/******* Bits definition for SIM_SCGC6 register ************/ -#define SIM_SCGC7_DMA ((uint32_t)0x00000002) /*!< DMA Clock Gate Control */ - -/****** Bits definition for SIM_CLKDIV1 register ***********/ -#define SIM_CLKDIV1_OUTDIV1_SHIFT 28 -#define SIM_CLKDIV1_OUTDIV1_MASK ((uint32_t)((uint32_t)0xF << SIM_CLKDIV1_OUTDIV1_SHIFT)) -#define SIM_CLKDIV1_OUTDIV1(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV1_SHIFT) & SIM_CLKDIV1_OUTDIV1_MASK)) -#define SIM_CLKDIV1_OUTDIV2_SHIFT 24 -#define SIM_CLKDIV1_OUTDIV2_MASK ((uint32_t)((uint32_t)0xF << SIM_CLKDIV1_OUTDIV2_SHIFT)) -#define SIM_CLKDIV1_OUTDIV2(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV2_SHIFT) & SIM_CLKDIV1_OUTDIV2_MASK)) -#define SIM_CLKDIV1_OUTDIV4_SHIFT 16 -#define SIM_CLKDIV1_OUTDIV4_MASK ((uint32_t)((uint32_t)0x7 << SIM_CLKDIV1_OUTDIV4_SHIFT)) -#define SIM_CLKDIV1_OUTDIV4(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV4_SHIFT) & SIM_CLKDIV1_OUTDIV4_MASK)) - -/****** Bits definition for SIM_CLKDIV2 register ***********/ -#define SIM_CLKDIV2_USBDIV_SHIFT 1 -#define SIM_CLKDIV2_USBDIV_MASK ((uint32_t)((uint32_t)0x7 << SIM_CLKDIV2_USBDIV_SHIFT)) -#define SIM_CLKDIV2_USBDIV(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV2_USBDIV_SHIFT) & SIM_CLKDIV2_USBDIV_MASK)) -#define SIM_CLKDIV2_USBFRAC ((uint32_t)0x00000001) - -#endif diff --git a/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x7.h b/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x7.h deleted file mode 100644 index 87a4e52..0000000 --- a/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20x7.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - * Copyright (C) 2014-2016 Fabio Utzig, http://fabioutzig.com - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#ifndef _K20x7_H_ -#define _K20x7_H_ - -/* - * ============================================================== - * ---------- Interrupt Number Definition ----------------------- - * ============================================================== - */ -typedef enum IRQn -{ -/****** Cortex-M0 Processor Exceptions Numbers ****************/ - InitialSP_IRQn = -15, - InitialPC_IRQn = -15, - NonMaskableInt_IRQn = -14, - HardFault_IRQn = -13, - MemoryManagement_IRQn = -12, - BusFault_IRQn = -11, - UsageFault_IRQn = -10, - SVCall_IRQn = -5, - DebugMonitor_IRQn = -4, - PendSV_IRQn = -2, - SysTick_IRQn = -1, - -/****** K20x Specific Interrupt Numbers ***********************/ - DMA0_IRQn = 0, // Vector40 - DMA1_IRQn = 1, // Vector44 - DMA2_IRQn = 2, // Vector48 - DMA3_IRQn = 3, // Vector4C - DMA4_IRQn = 4, // Vector50 - DMA5_IRQn = 5, // Vector54 - DMA6_IRQn = 6, // Vector58 - DMA7_IRQn = 7, // Vector5C - DMA8_IRQn = 8, // Vector60 - DMA9_IRQn = 9, // Vector64 - DMA10_IRQn = 10, // Vector68 - DMA11_IRQn = 11, // Vector6C - DMA12_IRQn = 12, // Vector70 - DMA13_IRQn = 13, // Vector74 - DMA14_IRQn = 14, // Vector78 - DMA15_IRQn = 15, // Vector7C - DMAError_IRQn = 16, // Vector80 - //~ DMA_IRQn = 17, // Vector84 - FlashMemComplete_IRQn = 18, // Vector88 - FlashMemReadCollision_IRQn = 19, // Vector8C - LowVoltageWarning_IRQn = 20, // Vector90 - LLWU_IRQn = 21, // Vector94 - WDOG_IRQn = 22, // Vector98 - I2C0_IRQn = 24, // VectorA0 - I2C1_IRQn = 25, // VectorA4 - SPI0_IRQn = 26, // VectorA8 - SPI1_IRQn = 27, // VectorAC - CANMessage_IRQn = 29, // VectorB4 - CANBusOff = 30, // VectorB8 - CANError = 31, // VectorBC - CANTxWarning = 32, // VectorC0 - CANRxWarning = 33, // VectorC4 - CANWakeUp = 34, // VectorC8 - I2S0Tx_IRQn = 35, // VectorCC - I2S1Rx_IRQn = 36, // VectorD0 - UART0LON_IRQn = 44, // VectorF0 - UART0Status_IRQn = 45, // VectorF4 - UART0Error_IRQn = 46, // VectorF8 - UART1Status_IRQn = 47, // VectorFC - UART1Error_IRQn = 48, // Vector100 - UART2Status_IRQn = 49, // Vector104 - UART2Error_IRQn = 50, // Vector108 - ADC0_IRQn = 57, // Vector124 - ADC1_IRQn = 58, // Vector128 - CMP0_IRQn = 59, // Vector12C - CMP1_IRQn = 60, // Vector130 - CMP2_IRQn = 61, // Vector134 - FTM0_IRQn = 62, // Vector138 - FTM1_IRQn = 63, // Vector13C - FTM2_IRQn = 64, // Vector140 - CMT_IRQn = 65, // Vector144 - RTCAlarm_IRQn = 66, // Vector148 - RTCSeconds_IRQn = 67, // Vector14C - PITChannel0_IRQn = 68, // Vector150 - PITChannel1_IRQn = 69, // Vector154 - PITChannel2_IRQn = 70, // Vector158 - PITChannel3_IRQn = 71, // Vector15C - PDB_IRQn = 72, // Vector160 - USB_OTG_IRQn = 73, // Vector164 - USBChargerDetect_IRQn = 74, // Vector168 - DAC0_IRQn = 81, // Vector184 - TSI_IRQn = 83, // Vector18C - MCG_IRQn = 84, // Vector190 - LPTMR0_IRQn = 85, // Vector194 - PINA_IRQn = 87, // Vector19C - PINB_IRQn = 88, // Vector1A0 - PINC_IRQn = 89, // Vector1A4 - PIND_IRQn = 90, // Vector1A8 - PINE_IRQn = 91, // Vector1AC - SoftInitInt_IRQn = 94, // Vector1B8 -} IRQn_Type; - -/* - * ========================================================================== - * ----------- Processor and Core Peripheral Section ------------------------ - * ========================================================================== - */ - -/** - * @brief K20x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -#define __FPU_PRESENT 0 -#define __MPU_PRESENT 0 -#define __NVIC_PRIO_BITS 4 -#define __Vendor_SysTickConfig 0 - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ - -#include "k20xx.h" - -typedef struct -{ - __IO uint32_t SOPT1; - __IO uint32_t SOPT1CFG; - uint32_t RESERVED0[1023]; - __IO uint32_t SOPT2; - uint32_t RESERVED1[1]; - __IO uint32_t SOPT4; - __IO uint32_t SOPT5; - uint32_t RESERVED2[1]; - __IO uint32_t SOPT7; - uint32_t RESERVED3[2]; - __I uint32_t SDID; - uint32_t RESERVED4[1]; - __IO uint32_t SCGC2; - __IO uint32_t SCGC3; - __IO uint32_t SCGC4; - __IO uint32_t SCGC5; - __IO uint32_t SCGC6; - __IO uint32_t SCGC7; - __IO uint32_t CLKDIV1; - __IO uint32_t CLKDIV2; - __I uint32_t FCFG1; - __I uint32_t FCFG2; - __I uint32_t UIDH; - __I uint32_t UIDMH; - __I uint32_t UIDML; - __I uint32_t UIDL; -} SIM_TypeDef; - -/****************************************************************/ -/* Peripheral memory map */ -/****************************************************************/ -#define AXBS_BASE ((uint32_t)0x40004000) // -#define DMA_BASE ((uint32_t)0x40008000) -#define FTFL_BASE ((uint32_t)0x40020000) -#define DMAMUX_BASE ((uint32_t)0x40021000) -#define FCAN0_BASE ((uint32_t)0x40024000) // -#define SPI0_BASE ((uint32_t)0x4002C000) -#define SPI1_BASE ((uint32_t)0x4002D000) // -#define I2S0_BASE ((uint32_t)0x4002F000) // -#define USBDCD_BASE ((uint32_t)0x40035000) // -#define PDB_BASE ((uint32_t)0x40036000) // -#define PIT_BASE ((uint32_t)0x40037000) -#define FTM0_BASE ((uint32_t)0x40038000) -#define FTM1_BASE ((uint32_t)0x40039000) -#define ADC0_BASE ((uint32_t)0x4003B000) -#define RTC_BASE ((uint32_t)0x4003D000) // -#define VBAT_BASE ((uint32_t)0x4003E000) -#define LPTMR0_BASE ((uint32_t)0x40040000) -#define SRF_BASE ((uint32_t)0x40041000) -#define TSI0_BASE ((uint32_t)0x40045000) -#define SIM_BASE ((uint32_t)0x40047000) -#define PORTA_BASE ((uint32_t)0x40049000) -#define PORTB_BASE ((uint32_t)0x4004A000) -#define PORTC_BASE ((uint32_t)0x4004B000) -#define PORTD_BASE ((uint32_t)0x4004C000) -#define PORTE_BASE ((uint32_t)0x4004D000) -#define WDOG_BASE ((uint32_t)0x40052000) -#define EWDOG_BASE ((uint32_t)0x40061000) // -#define CMT_BASE ((uint32_t)0x40062000) // -#define MCG_BASE ((uint32_t)0x40064000) -#define OSC0_BASE ((uint32_t)0x40065000) -#define I2C0_BASE ((uint32_t)0x40066000) -#define I2C1_BASE ((uint32_t)0x40067000) // -#define UART0_BASE ((uint32_t)0x4006A000) -#define UART1_BASE ((uint32_t)0x4006B000) -#define UART2_BASE ((uint32_t)0x4006C000) -#define USBOTG_BASE ((uint32_t)0x40072000) -#define CMP0_BASE ((uint32_t)0x40073000) // -#define VREF_BASE ((uint32_t)0x40074000) // -#define LLWU_BASE ((uint32_t)0x4007C000) -#define PMC_BASE ((uint32_t)0x4007D000) -#define SMC_BASE ((uint32_t)0x4007E000) // -#define RCM_BASE ((uint32_t)0x4007F000) // -#define FTM2_BASE ((uint32_t)0x400B8000) // -#define ADC1_BASE ((uint32_t)0x400BB000) // -#define DAC0_BASE ((uint32_t)0x400CC000) // -#define GPIOA_BASE ((uint32_t)0x400FF000) -#define GPIOB_BASE ((uint32_t)0x400FF040) -#define GPIOC_BASE ((uint32_t)0x400FF080) -#define GPIOD_BASE ((uint32_t)0x400FF0C0) -#define GPIOE_BASE ((uint32_t)0x400FF100) - -/****************************************************************/ -/* Peripheral declaration */ -/****************************************************************/ -#define DMA ((DMA_TypeDef *) DMA_BASE) -#define FTFL ((FTFL_TypeDef *) FTFL_BASE) -#define DMAMUX ((DMAMUX_TypeDef *) DMAMUX_BASE) -#define PIT ((PIT_TypeDef *) PIT_BASE) -#define FTM0 ((FTM_TypeDef *) FTM0_BASE) -#define FTM1 ((FTM_TypeDef *) FTM1_BASE) -#define FTM2 ((FTM_TypeDef *) FTM2_BASE) -#define ADC0 ((ADC_TypeDef *) ADC0_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define VBAT ((volatile uint8_t *)VBAT_BASE) /* 32 bytes */ -#define LPTMR0 ((LPTMR_TypeDef *) LPTMR0_BASE) -#define SYSTEM_REGISTER_FILE ((volatile uint8_t *)SRF_BASE) /* 32 bytes */ -#define TSI0 ((TSI_TypeDef *) TSI0_BASE) -#define SIM ((SIM_TypeDef *) SIM_BASE) -#define LLWU ((LLWU_TypeDef *) LLWU_BASE) -#define PMC ((PMC_TypeDef *) PMC_BASE) -#define PORTA ((PORT_TypeDef *) PORTA_BASE) -#define PORTB ((PORT_TypeDef *) PORTB_BASE) -#define PORTC ((PORT_TypeDef *) PORTC_BASE) -#define PORTD ((PORT_TypeDef *) PORTD_BASE) -#define PORTE ((PORT_TypeDef *) PORTE_BASE) -#define WDOG ((WDOG_TypeDef *) WDOG_BASE) -#define USB0 ((USBOTG_TypeDef *) USBOTG_BASE) -#define MCG ((MCG_TypeDef *) MCG_BASE) -#define OSC0 ((OSC_TypeDef *) OSC0_BASE) -#define SPI0 ((SPI_TypeDef *) SPI0_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define UART0 ((UART_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) - -/****************************************************************/ -/* Peripheral Registers Bits Definition */ -/****************************************************************/ - -/****************************************************************/ -/* */ -/* System Integration Module (SIM) */ -/* */ -/****************************************************************/ -/********* Bits definition for SIM_SOPT1 register *************/ -#define SIM_SOPT1_USBREGEN ((uint32_t)0x80000000) /*!< USB voltage regulator enable */ -#define SIM_SOPT1_USBSSTBY ((uint32_t)0x40000000) /*!< USB voltage regulator in standby mode during Stop, VLPS, LLS and VLLS modes */ -#define SIM_SOPT1_USBVSTBY ((uint32_t)0x20000000) /*!< USB voltage regulator in standby mode during VLPR and VLPW modes */ -#define SIM_SOPT1_OSC32KSEL_SHIFT 18 /*!< 32K oscillator clock select (shift) */ -#define SIM_SOPT1_OSC32KSEL_MASK ((uint32_t)((uint32_t)0x3 << SIM_SOPT1_OSC32KSEL_SHIFT)) /*!< 32K oscillator clock select (mask) */ -#define SIM_SOPT1_OSC32KSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_OSC32KSEL_SHIFT) & SIM_SOPT1_OSC32KSEL_MASK)) /*!< 32K oscillator clock select */ -#define SIM_SOPT1_RAMSIZE_SHIFT 12 -#define SIM_SOPT1_RAMSIZE_MASK ((uint32_t)((uint32_t)0xf << SIM_SOPT1_RAMSIZE_SHIFT)) -#define SIM_SOPT1_RAMSIZE(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_RAMSIZE_SHIFT) & SIM_SOPT1_RAMSIZE_MASK)) - -/******* Bits definition for SIM_SOPT1CFG register ************/ -#define SIM_SOPT1CFG_USSWE ((uint32_t)0x04000000) /*!< USB voltage regulator stop standby write enable */ -#define SIM_SOPT1CFG_UVSWE ((uint32_t)0x02000000) /*!< USB voltage regulator VLP standby write enable */ -#define SIM_SOPT1CFG_URWE ((uint32_t)0x01000000) /*!< USB voltage regulator voltage regulator write enable */ - -/******* Bits definition for SIM_SOPT2 register ************/ -#define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) /*!< USB clock source select */ -#define SIM_SOPT2_PLLFLLSEL ((uint32_t)0x00010000) /*!< PLL/FLL clock select */ -#define SIM_SOPT2_TRACECLKSEL ((uint32_t)0x00001000) -#define SIM_SOPT2_PTD7PAD ((uint32_t)0x00000800) -#define SIM_SOPT2_CLKOUTSEL_SHIFT 5 -#define SIM_SOPT2_CLKOUTSEL_MASK ((uint32_t)((uint32_t)0x7 << SIM_SOPT2_CLKOUTSEL_SHIFT)) -#define SIM_SOPT2_CLKOUTSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_CLKOUTSEL_SHIFT) & SIM_SOPT2_CLKOUTSEL_MASK)) -#define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) /*!< RTC clock out select */ - -/******* Bits definition for SIM_SCGC2 register ************/ -#define SIM_SCGC2_DAC0 ((uint32_t)0x00001000) /*!< DAC0 Clock Gate Control */ - -/******* Bits definition for SIM_SCGC3 register ************/ -#define SIM_SCGC3_ADC1 ((uint32_t)0x08000000) /*!< ADC1 Clock Gate Control */ -#define SIM_SCGC3_FTM2 ((uint32_t)0x01000000) /*!< FTM2 Clock Gate Control */ - -/******* Bits definition for SIM_SCGC4 register ************/ -#define SIM_SCGC4_VREF ((uint32_t)0x00100000) /*!< VREF Clock Gate Control */ -#define SIM_SCGC4_CMP ((uint32_t)0x00080000) /*!< Comparator Clock Gate Control */ -#define SIM_SCGC4_USBOTG ((uint32_t)0x00040000) /*!< USB Clock Gate Control */ -#define SIM_SCGC4_UART2 ((uint32_t)0x00001000) /*!< UART2 Clock Gate Control */ -#define SIM_SCGC4_UART1 ((uint32_t)0x00000800) /*!< UART1 Clock Gate Control */ -#define SIM_SCGC4_UART0 ((uint32_t)0x00000400) /*!< UART0 Clock Gate Control */ -#define SIM_SCGC4_I2C1 ((uint32_t)0x00000080) /*!< I2C1 Clock Gate Control */ -#define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) /*!< I2C0 Clock Gate Control */ -#define SIM_SCGC4_CMT ((uint32_t)0x00000004) /*!< CMT Clock Gate Control */ -#define SIM_SCGC4_EMW ((uint32_t)0x00000002) /*!< EWM Clock Gate Control */ - -/******* Bits definition for SIM_SCGC5 register ************/ -#define SIM_SCGC5_PORTE ((uint32_t)0x00002000) /*!< Port E Clock Gate Control */ -#define SIM_SCGC5_PORTD ((uint32_t)0x00001000) /*!< Port D Clock Gate Control */ -#define SIM_SCGC5_PORTC ((uint32_t)0x00000800) /*!< Port C Clock Gate Control */ -#define SIM_SCGC5_PORTB ((uint32_t)0x00000400) /*!< Port B Clock Gate Control */ -#define SIM_SCGC5_PORTA ((uint32_t)0x00000200) /*!< Port A Clock Gate Control */ -#define SIM_SCGC5_TSI ((uint32_t)0x00000020) /*!< TSI Access Control */ -#define SIM_SCGC5_LPTIMER ((uint32_t)0x00000001) /*!< Low Power Timer Access Control */ - -/******* Bits definition for SIM_SCGC6 register ************/ -#define SIM_SCGC6_RTC ((uint32_t)0x20000000) /*!< RTC Access Control */ -#define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) /*!< ADC0 Clock Gate Control */ -#define SIM_SCGC6_FTM1 ((uint32_t)0x02000000) /*!< FTM1 Clock Gate Control */ -#define SIM_SCGC6_FTM0 ((uint32_t)0x01000000) /*!< FTM0 Clock Gate Control */ -#define SIM_SCGC6_PIT ((uint32_t)0x00800000) /*!< PIT Clock Gate Control */ -#define SIM_SCGC6_PDB ((uint32_t)0x00400000) /*!< PDB Clock Gate Control */ -#define SIM_SCGC6_USBDCD ((uint32_t)0x00200000) /*!< USB DCD Clock Gate Control */ -#define SIM_SCGC6_CRC ((uint32_t)0x00040000) /*!< Low Power Timer Access Control */ -#define SIM_SCGC6_I2S ((uint32_t)0x00008000) /*!< CRC Clock Gate Control */ -#define SIM_SCGC6_SPI1 ((uint32_t)0x00002000) /*!< SPI1 Clock Gate Control */ -#define SIM_SCGC6_SPI0 ((uint32_t)0x00001000) /*!< SPI0 Clock Gate Control */ -#define SIM_SCGC6_FCAN0 ((uint32_t)0x00000010) /*!< FlexCAN 0 Clock Gate Control */ -#define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) /*!< DMA Mux Clock Gate Control */ -#define SIM_SCGC6_FTFL ((uint32_t)0x00000001) /*!< Flash Memory Clock Gate Control */ - -/******* Bits definition for SIM_SCGC6 register ************/ -#define SIM_SCGC7_DMA ((uint32_t)0x00000002) /*!< DMA Clock Gate Control */ - -/****** Bits definition for SIM_CLKDIV1 register ***********/ -#define SIM_CLKDIV1_OUTDIV1_SHIFT 28 -#define SIM_CLKDIV1_OUTDIV1_MASK ((uint32_t)((uint32_t)0xF << SIM_CLKDIV1_OUTDIV1_SHIFT)) -#define SIM_CLKDIV1_OUTDIV1(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV1_SHIFT) & SIM_CLKDIV1_OUTDIV1_MASK)) -#define SIM_CLKDIV1_OUTDIV2_SHIFT 24 -#define SIM_CLKDIV1_OUTDIV2_MASK ((uint32_t)((uint32_t)0xF << SIM_CLKDIV1_OUTDIV2_SHIFT)) -#define SIM_CLKDIV1_OUTDIV2(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV2_SHIFT) & SIM_CLKDIV1_OUTDIV2_MASK)) -#define SIM_CLKDIV1_OUTDIV4_SHIFT 16 -#define SIM_CLKDIV1_OUTDIV4_MASK ((uint32_t)((uint32_t)0x7 << SIM_CLKDIV1_OUTDIV4_SHIFT)) -#define SIM_CLKDIV1_OUTDIV4(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV4_SHIFT) & SIM_CLKDIV1_OUTDIV4_MASK)) - -/****** Bits definition for SIM_CLKDIV2 register ***********/ -#define SIM_CLKDIV2_USBDIV_SHIFT 1 -#define SIM_CLKDIV2_USBDIV_MASK ((uint32_t)((uint32_t)0x7 << SIM_CLKDIV2_USBDIV_SHIFT)) -#define SIM_CLKDIV2_USBDIV(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV2_USBDIV_SHIFT) & SIM_CLKDIV2_USBDIV_MASK)) -#define SIM_CLKDIV2_USBFRAC ((uint32_t)0x00000001) - -#endif diff --git a/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20xx.h b/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20xx.h deleted file mode 100644 index 38855aa..0000000 --- a/ChibiOS_16.1.5/community/os/common/ext/CMSIS/KINETIS/k20xx.h +++ /dev/null @@ -1,2319 +0,0 @@ -/* - * Copyright (C) 2014-2016 Fabio Utzig, http://fabioutzig.com - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#ifndef _K20xx_H_ -#define _K20xx_H_ - -/* - * ============================================================== - * ---------- Interrupt Number Definition ----------------------- - * ============================================================== - */ - -/* Device dependent */ - -/* - * ========================================================================== - * ----------- Processor and Core Peripheral Section ------------------------ - * ========================================================================== - */ - -/** - * @brief K20x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -#define __MPU_PRESENT 0 -#define __NVIC_PRIO_BITS 4 -#define __Vendor_SysTickConfig 0 - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ - -/* Device dependent -typedef struct -{ - __IO uint32_t SOPT1; - __IO uint32_t SOPT1CFG; - uint32_t RESERVED0[1023]; - __IO uint32_t SOPT2; - uint32_t RESERVED1[1]; - __IO uint32_t SOPT4; - __IO uint32_t SOPT5; - uint32_t RESERVED2[1]; - __IO uint32_t SOPT7; - uint32_t RESERVED3[2]; - __I uint32_t SDID; - uint32_t RESERVED4[3]; - __IO uint32_t SCGC4; - __IO uint32_t SCGC5; - __IO uint32_t SCGC6; - __IO uint32_t SCGC7; - __IO uint32_t CLKDIV1; - __IO uint32_t CLKDIV2; - __I uint32_t FCFG1; - __I uint32_t FCFG2; - __I uint32_t UIDH; - __I uint32_t UIDMH; - __I uint32_t UIDML; - __I uint32_t UIDL; -} SIM_TypeDef; -*/ - -typedef struct -{ - __IO uint8_t PE1; - __IO uint8_t PE2; - __IO uint8_t PE3; - __IO uint8_t PE4; - __IO uint8_t ME; - __IO uint8_t F1; - __IO uint8_t F2; - __I uint8_t F3; - __IO uint8_t FILT1; - __IO uint8_t FILT2; -} LLWU_TypeDef; - -typedef struct -{ - __IO uint32_t PCR[32]; - __O uint32_t GPCLR; - __O uint32_t GPCHR; - uint32_t RESERVED0[6]; - __IO uint32_t ISFR; -} PORT_TypeDef; - -typedef struct -{ - __IO uint8_t C1; - __IO uint8_t C2; - __IO uint8_t C3; - __IO uint8_t C4; - __IO uint8_t C5; - __IO uint8_t C6; - __I uint8_t S; - uint8_t RESERVED0[1]; - __IO uint8_t SC; - uint8_t RESERVED1[1]; - __IO uint8_t ATCVH; - __IO uint8_t ATCVL; - __IO uint8_t C7; - __IO uint8_t C8; -} MCG_TypeDef; - -typedef struct -{ - __IO uint8_t CR; -} OSC_TypeDef; - -typedef struct { - uint32_t SADDR; /* TCD Source Address */ - uint16_t SOFF; /* TCD Signed Source Address Offset */ - uint16_t ATTR; /* TCD Transfer Attributes */ - union { - uint32_t NBYTES_MLNO; /* TCD Minor Byte Count (Minor Loop Disabled) */ - uint32_t NBYTES_MLOFFNO; /* TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) */ - uint32_t NBYTES_MLOFFYES; /* TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) */ - }; - uint32_t SLAST; /* TCD Last Source Address Adjustment */ - uint32_t DADDR; /* TCD Destination Address */ - uint16_t DOFF; /* TCD Signed Destination Address Offset */ - union { - uint16_t CITER_ELINKNO; /* TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) */ - uint16_t CITER_ELINKYES; /* TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) */ - }; - uint32_t DLASTSGA; /* TCD Last Destination Address Adjustment/Scatter Gather Address */ - uint16_t CSR; /* TCD Control and Status */ - union { - uint16_t BITER_ELINKNO; /* TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) */ - uint16_t BITER_ELINKYES; /* TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) */ - }; -} DMA_TCD_TypeDef; - -/** DMA - Peripheral register structure */ -typedef struct { - __IO uint32_t CR; /* Control Register */ - __IO uint32_t ES; /* Error Status Register */ - __IO uint8_t RESERVED_0[4]; - __IO uint32_t ERQ; /* Enable Request Register */ - __IO uint8_t RESERVED_1[4]; - __IO uint32_t EEI; /* Enable Error Interrupt Register */ - __IO uint8_t CEEI; /* Clear Enable Error Interrupt Register */ - __IO uint8_t SEEI; /* Set Enable Error Interrupt Register */ - __IO uint8_t CERQ; /* Clear Enable Request Register */ - __IO uint8_t SERQ; /* Set Enable Request Register */ - __IO uint8_t CDNE; /* Clear DONE Status Bit Register */ - __IO uint8_t SSRT; /* Set START Bit Register */ - __IO uint8_t CERR; /* Clear Error Register */ - __IO uint8_t CINT; /* Clear Interrupt Request Register */ - __IO uint8_t RESERVED_2[4]; - __IO uint32_t INT; /* Interrupt Request Register */ - __IO uint8_t RESERVED_3[4]; - __IO uint32_t ERR; /* Error Register */ - __IO uint8_t RESERVED_4[4]; - __IO uint32_t HRS; /* Hardware Request Status Register */ - __IO uint8_t RESERVED_5[200]; - __IO uint8_t DCHPRI3; /* Channel 3 Priority Register */ - __IO uint8_t DCHPRI2; /* Channel 2 Priority Register */ - __IO uint8_t DCHPRI1; /* Channel 1 Priority Register */ - __IO uint8_t DCHPRI0; /* Channel 0 Priority Register */ - __IO uint8_t RESERVED_6[3836]; - DMA_TCD_TypeDef TCD[4]; -} DMA_TypeDef; - -typedef struct -{ - __IO uint8_t CHCFG[4]; -} DMAMUX_TypeDef; - -/** PIT - Peripheral register structure */ -typedef struct { - __IO uint32_t MCR; /* PIT Module Control Register */ - uint8_t RESERVED0[252]; - struct PIT_CHANNEL { - __IO uint32_t LDVAL; /* Timer Load Value Register */ - __IO uint32_t CVAL; /* Current Timer Value Register */ - __IO uint32_t TCTRL; /* Timer Control Register */ - __IO uint32_t TFLG; /* Timer Flag Register */ - } CHANNEL[4]; -} PIT_TypeDef; - -typedef struct -{ - __IO uint32_t SC; /* Status and Control */ - __IO uint32_t CNT; /* Counter */ - __IO uint32_t MOD; /* Modulo */ - struct FTM_Channel { - __IO uint32_t CnSC; /* Channel Status and Control */ - __IO uint32_t CnV; /* Channel Value */ - } CHANNEL[8]; - __IO uint32_t CNTIN; /* Counter Initial Value */ - __IO uint32_t STATUS; /* Capture and Compare Status */ - __IO uint32_t MODE; /* Features Mode Selection */ - __IO uint32_t SYNC; /* Synchronization */ - __IO uint32_t OUTINIT; /* Initial State for Channels Output */ - __IO uint32_t OUTMASK; /* Output Mask */ - __IO uint32_t COMBINE; /* Function for Linked Channels */ - __IO uint32_t DEADTIME; /* Deadtime Insertion Control */ - __IO uint32_t EXTTRIG; /* FTM External Trigger */ - __IO uint32_t POL; /* Channels Polarity */ - __IO uint32_t FMS; /* Fault Mode Status */ - __IO uint32_t FILTER; /* Input Capture Filter Control */ - __IO uint32_t FLTCTRL; /* Fault Control */ - __IO uint32_t QDCTRL; /* Quadrature Decode Control and Status */ - __IO uint32_t CONF; /* Configuration */ - __IO uint32_t FTLPOL; /* FTM Fault Input Polarity */ - __IO uint32_t SYNCONF; /* Synchronization Configuration */ - __IO uint32_t INVCTRL; /* FTM Inverting Control */ - __IO uint32_t SWOCTRL; /* FTM Software Output Control */ - __IO uint32_t PWMLOAD; /* FTM PWM Load */ -} FTM_TypeDef; - -typedef struct -{ - __IO uint32_t SC1A; // offset: 0x00 - __IO uint32_t SC1B; // offset: 0x04 - __IO uint32_t CFG1; // offset: 0x08 - __IO uint32_t CFG2; // offset: 0x0C - __I uint32_t RA; // offset: 0x10 - __I uint32_t RB; // offset: 0x14 - __IO uint32_t CV1; // offset: 0x18 - __IO uint32_t CV2; // offset: 0x1C - __IO uint32_t SC2; // offset: 0x20 - __IO uint32_t SC3; // offset: 0x24 - __IO uint32_t OFS; // offset: 0x28 - __IO uint32_t PG; // offset: 0x2C - __IO uint32_t MG; // offset: 0x30 - __IO uint32_t CLPD; // offset: 0x34 - __IO uint32_t CLPS; // offset: 0x38 - __IO uint32_t CLP4; // offset: 0x3C - __IO uint32_t CLP3; // offset: 0x40 - __IO uint32_t CLP2; // offset: 0x44 - __IO uint32_t CLP1; // offset: 0x48 - __IO uint32_t CLP0; // offset: 0x4C - uint32_t RESERVED0[1]; // offset: 0x50 - __IO uint32_t CLMD; // offset: 0x54 - __IO uint32_t CLMS; // offset: 0x58 - __IO uint32_t CLM4; // offset: 0x5C - __IO uint32_t CLM3; // offset: 0x60 - __IO uint32_t CLM2; // offset: 0x64 - __IO uint32_t CLM1; // offset: 0x68 - __IO uint32_t CLM0; // offset: 0x6C -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; - __IO uint32_t PSR; - __IO uint32_t CMR; - __I uint32_t CNR; -} LPTMR_TypeDef; - -typedef struct -{ - __IO uint32_t GENCS; - __IO uint32_t DATA; - __IO uint32_t TSHD; -} TSI_TypeDef; - -typedef struct -{ - __IO uint32_t PDOR; - __IO uint32_t PSOR; - __IO uint32_t PCOR; - __IO uint32_t PTOR; - __IO uint32_t PDIR; - __IO uint32_t PDDR; -} GPIO_TypeDef; - -/** SPI - Peripheral register structure */ -typedef struct { - __IO uint32_t MCR; /**< DSPI Module Configuration Register, offset: 0x0 */ - uint32_t RESERVED0[1]; - __IO uint32_t TCR; /**< DSPI Transfer Count Register, offset: 0x8 */ - union { /* offset: 0xC */ - __IO uint32_t CTAR[2]; /**< DSPI Clock and Transfer Attributes Register (In Master Mode), array offset: 0xC, array step: 0x4 */ - __IO uint32_t CTAR_SLAVE[1]; /**< DSPI Clock and Transfer Attributes Register (In Slave Mode), array offset: 0xC, array step: 0x4 */ - }; - uint32_t RESERVED1[6]; - __IO uint32_t SR; /**< DSPI Status Register, offset: 0x2C */ - __IO uint32_t RSER; /**< DSPI DMA/Interrupt Request Select and Enable Register, offset: 0x30 */ - union { /* offset: 0x34 */ - __IO uint32_t PUSHR; /**< DSPI PUSH TX FIFO Register In Master Mode, offset: 0x34 */ - __IO uint32_t PUSHR_SLAVE; /**< DSPI PUSH TX FIFO Register In Slave Mode, offset: 0x34 */ - }; - __I uint32_t POPR; /**< DSPI POP RX FIFO Register, offset: 0x38 */ - __I uint32_t TXFR[4]; /**< DSPI Transmit FIFO Registers, offset: 0x3C */ - uint32_t RESERVED2[12]; - __I uint32_t RXFR[4]; /**< DSPI Receive FIFO Registers, offset: 0x7C */ -} SPI_TypeDef; - -typedef struct -{ - __IO uint8_t A1; - __IO uint8_t F; - __IO uint8_t C1; - __IO uint8_t S; - __IO uint8_t D; - __IO uint8_t C2; - __IO uint8_t FLT; - __IO uint8_t RA; - __IO uint8_t SMB; - __IO uint8_t A2; - __IO uint8_t SLTH; - __IO uint8_t SLTL; -} I2C_TypeDef; - -typedef struct -{ - __IO uint8_t BDH; - __IO uint8_t BDL; - __IO uint8_t C1; - __IO uint8_t C2; - __I uint8_t S1; - __IO uint8_t S2; - __IO uint8_t C3; - __IO uint8_t D; - __IO uint8_t MA1; - __IO uint8_t MA2; - __IO uint8_t C4; - __IO uint8_t C5; - __I uint8_t ED; - __IO uint8_t MODEM; - __IO uint8_t IR; - uint8_t RESERVED0[1]; - __IO uint8_t PFIFO; - __IO uint8_t CFIFO; - __IO uint8_t SFIFO; - __IO uint8_t TWFIFO; - __I uint8_t TCFIFO; - __IO uint8_t RWFIFO; - __I uint8_t RCFIFO; - uint8_t RESERVED1[1]; - __IO uint8_t C7816; - __IO uint8_t IE7816; - __IO uint8_t IS7816; - union { - __IO uint8_t WP7816T0; - __IO uint8_t WP7816T1; - }; - __IO uint8_t WN7816; - __IO uint8_t WF7816; - __IO uint8_t ET7816; - __IO uint8_t TL7816; - uint8_t RESERVED2[2]; - __IO uint8_t C6; - __IO uint8_t PCTH; - __IO uint8_t PCTL; - __IO uint8_t B1T; - __IO uint8_t SDTH; - __IO uint8_t SDTL; - __IO uint8_t PRE; - __IO uint8_t TPL; - __IO uint8_t IE; - __IO uint8_t WB; - __IO uint8_t S3; - __IO uint8_t S4; - __I uint8_t RPL; - __I uint8_t RPREL; - __IO uint8_t CPW; - __IO uint8_t RIDT; - __IO uint8_t TIDT; -} UART_TypeDef; - -typedef struct -{ - __IO uint8_t LVDSC1; - __IO uint8_t LVDSC2; - __IO uint8_t REGSC; -} PMC_TypeDef; - -typedef struct -{ - __IO uint16_t STCTRLH; - __IO uint16_t STCTRLL; - __IO uint16_t TOVALH; - __IO uint16_t TOVALL; - __IO uint16_t WINH; - __IO uint16_t WINL; - __IO uint16_t REFRESH; - __IO uint16_t UNLOCK; - __IO uint16_t TMROUTH; - __IO uint16_t TMROUTL; - __IO uint16_t RSTCNT; - __IO uint16_t PRESC; -} WDOG_TypeDef; - -typedef struct { - __I uint8_t PERID; // 0x00 - uint8_t RESERVED0[3]; - __I uint8_t IDCOMP; // 0x04 - uint8_t RESERVED1[3]; - __I uint8_t REV; // 0x08 - uint8_t RESERVED2[3]; - __I uint8_t ADDINFO; // 0x0C - uint8_t RESERVED3[3]; - __IO uint8_t OTGISTAT; // 0x10 - uint8_t RESERVED4[3]; - __IO uint8_t OTGICR; // 0x14 - uint8_t RESERVED5[3]; - __IO uint8_t OTGSTAT; // 0x18 - uint8_t RESERVED6[3]; - __IO uint8_t OTGCTL; // 0x1C - uint8_t RESERVED7[99]; - __IO uint8_t ISTAT; // 0x80 - uint8_t RESERVED8[3]; - __IO uint8_t INTEN; // 0x84 - uint8_t RESERVED9[3]; - __IO uint8_t ERRSTAT; // 0x88 - uint8_t RESERVED10[3]; - __IO uint8_t ERREN; // 0x8C - uint8_t RESERVED11[3]; - __I uint8_t STAT; // 0x90 - uint8_t RESERVED12[3]; - __IO uint8_t CTL; // 0x94 - uint8_t RESERVED13[3]; - __IO uint8_t ADDR; // 0x98 - uint8_t RESERVED14[3]; - __IO uint8_t BDTPAGE1; // 0x9C - uint8_t RESERVED15[3]; - __IO uint8_t FRMNUML; // 0xA0 - uint8_t RESERVED16[3]; - __IO uint8_t FRMNUMH; // 0xA4 - uint8_t RESERVED17[3]; - __IO uint8_t TOKEN; // 0xA8 - uint8_t RESERVED18[3]; - __IO uint8_t SOFTHLD; // 0xAC - uint8_t RESERVED19[3]; - __IO uint8_t BDTPAGE2; // 0xB0 - uint8_t RESERVED20[3]; - __IO uint8_t BDTPAGE3; // 0xB4 - uint8_t RESERVED21[11]; - struct { - __IO uint8_t V; // 0xC0 - uint8_t RESERVED[3]; - } ENDPT[16]; - __IO uint8_t USBCTRL; // 0x100 - uint8_t RESERVED22[3]; - __I uint8_t OBSERVE; // 0x104 - uint8_t RESERVED23[3]; - __IO uint8_t CONTROL; // 0x108 - uint8_t RESERVED24[3]; - __IO uint8_t USBTRC0; // 0x10C - uint8_t RESERVED25[7]; - __IO uint8_t USBFRMADJUST; // 0x114 -} USBOTG_TypeDef; - -typedef struct -{ - __IO uint8_t FSTAT; - __IO uint8_t FCNFG; - __I uint8_t FSEC; - __I uint8_t FOPT; - __IO uint8_t FCCOB3; - __IO uint8_t FCCOB2; - __IO uint8_t FCCOB1; - __IO uint8_t FCCOB0; - __IO uint8_t FCCOB7; - __IO uint8_t FCCOB6; - __IO uint8_t FCCOB5; - __IO uint8_t FCCOB4; - __IO uint8_t FCCOBB; - __IO uint8_t FCCOBA; - __IO uint8_t FCCOB9; - __IO uint8_t FCCOB8; - __IO uint8_t FPROT3; - __IO uint8_t FPROT2; - __IO uint8_t FPROT1; - __IO uint8_t FPROT0; - uint8_t RESERVED0[2]; - __IO uint8_t FEPROT; - __IO uint8_t FDPROT; -} FTFL_TypeDef; - -/****************************************************************/ -/* Peripheral memory map */ -/****************************************************************/ - - /* Device dependent */ - -/****************************************************************/ -/* Peripheral declaration */ -/****************************************************************/ - - /* Device dependent */ - -/****************************************************************/ -/* Peripheral Registers Bits Definition */ -/****************************************************************/ - -/****************************************************************/ -/* */ -/* System Integration Module (SIM) */ -/* */ -/****************************************************************/ - - /* Device dependent */ - -/****************************************************************/ -/* */ -/* Low-Leakage Wakeup Unit (LLWU) */ -/* */ -/****************************************************************/ -/********** Bits definition for LLWU_PE1 register *************/ -#define LLWU_PE1_WUPE3_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P3 (shift) */ -#define LLWU_PE1_WUPE3_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE3_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P3 (mask) */ -#define LLWU_PE1_WUPE3(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE3_SHIFT) & LLWU_PE1_WUPE3_MASK)) /*!< Wakeup Pin Enable for LLWU_P3 */ -#define LLWU_PE1_WUPE2_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P2 (shift) */ -#define LLWU_PE1_WUPE2_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE2_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P2 (mask) */ -#define LLWU_PE1_WUPE2(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE2_SHIFT) & LLWU_PE1_WUPE2_MASK)) /*!< Wakeup Pin Enable for LLWU_P2 */ -#define LLWU_PE1_WUPE1_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P1 (shift) */ -#define LLWU_PE1_WUPE1_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE1_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P1 (mask) */ -#define LLWU_PE1_WUPE1(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE1_SHIFT) & LLWU_PE1_WUPE1_MASK)) /*!< Wakeup Pin Enable for LLWU_P1 */ -#define LLWU_PE1_WUPE0_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P0 (shift) */ -#define LLWU_PE1_WUPE0_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE0_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P0 (mask) */ -#define LLWU_PE1_WUPE0(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE0_SHIFT) & LLWU_PE1_WUPE0_MASK)) /*!< Wakeup Pin Enable for LLWU_P0 */ - -/********** Bits definition for LLWU_PE2 register *************/ -#define LLWU_PE2_WUPE7_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P7 (shift) */ -#define LLWU_PE2_WUPE7_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE7_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P7 (mask) */ -#define LLWU_PE2_WUPE7(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE7_SHIFT) & LLWU_PE2_WUPE7_MASK)) /*!< Wakeup Pin Enable for LLWU_P7 */ -#define LLWU_PE2_WUPE6_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P6 (shift) */ -#define LLWU_PE2_WUPE6_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE6_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P6 (mask) */ -#define LLWU_PE2_WUPE6(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE6_SHIFT) & LLWU_PE2_WUPE6_MASK)) /*!< Wakeup Pin Enable for LLWU_P6 */ -#define LLWU_PE2_WUPE5_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P5 (shift) */ -#define LLWU_PE2_WUPE5_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE5_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P5 (mask) */ -#define LLWU_PE2_WUPE5(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE5_SHIFT) & LLWU_PE2_WUPE5_MASK)) /*!< Wakeup Pin Enable for LLWU_P5 */ -#define LLWU_PE2_WUPE4_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P4 (shift) */ -#define LLWU_PE2_WUPE4_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE4_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P4 (mask) */ -#define LLWU_PE2_WUPE4(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE4_SHIFT) & LLWU_PE2_WUPE4_MASK)) /*!< Wakeup Pin Enable for LLWU_P4 */ - -/********** Bits definition for LLWU_PE3 register *************/ -#define LLWU_PE3_WUPE11_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P11 (shift) */ -#define LLWU_PE3_WUPE11_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE11_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P11 (mask) */ -#define LLWU_PE3_WUPE11(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE11_SHIFT) & LLWU_PE3_WUPE11_MASK)) /*!< Wakeup Pin Enable for LLWU_P11 */ -#define LLWU_PE3_WUPE10_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P10 (shift) */ -#define LLWU_PE3_WUPE10_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE10_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P10 (mask) */ -#define LLWU_PE3_WUPE10(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE10_SHIFT) & LLWU_PE3_WUPE10_MASK)) /*!< Wakeup Pin Enable for LLWU_P10 */ -#define LLWU_PE3_WUPE13_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P9 (shift) */ -#define LLWU_PE3_WUPE13_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE13_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P9 (mask) */ -#define LLWU_PE3_WUPE13(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE13_SHIFT) & LLWU_PE3_WUPE13_MASK)) /*!< Wakeup Pin Enable for LLWU_P9 */ -#define LLWU_PE3_WUPE8_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P8 (shift) */ -#define LLWU_PE3_WUPE8_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE8_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P8 (mask) */ -#define LLWU_PE3_WUPE8(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE8_SHIFT) & LLWU_PE3_WUPE8_MASK)) /*!< Wakeup Pin Enable for LLWU_P8 */ - -/********** Bits definition for LLWU_PE4 register *************/ -#define LLWU_PE4_WUPE15_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P15 (shift) */ -#define LLWU_PE4_WUPE15_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE15_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P15 (mask) */ -#define LLWU_PE4_WUPE15(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE15_SHIFT) & LLWU_PE4_WUPE15_MASK)) /*!< Wakeup Pin Enable for LLWU_P15 */ -#define LLWU_PE4_WUPE14_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P14 (shift) */ -#define LLWU_PE4_WUPE14_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE14_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P14 (mask) */ -#define LLWU_PE4_WUPE14(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE14_SHIFT) & LLWU_PE4_WUPE14_MASK)) /*!< Wakeup Pin Enable for LLWU_P14 */ -#define LLWU_PE4_WUPE13_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P13 (shift) */ -#define LLWU_PE4_WUPE13_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE13_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P13 (mask) */ -#define LLWU_PE4_WUPE13(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE13_SHIFT) & LLWU_PE4_WUPE13_MASK)) /*!< Wakeup Pin Enable for LLWU_P13 */ -#define LLWU_PE4_WUPE12_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P12 (shift) */ -#define LLWU_PE4_WUPE12_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE12_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P12 (mask) */ -#define LLWU_PE4_WUPE12(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE12_SHIFT) & LLWU_PE4_WUPE12_MASK)) /*!< Wakeup Pin Enable for LLWU_P12 */ - -/********** Bits definition for LLWU_ME register *************/ -#define LLWU_ME_WUME7 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Module Enable for Module 7 */ -#define LLWU_ME_WUME6 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Module Enable for Module 6 */ -#define LLWU_ME_WUME5 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Module Enable for Module 5 */ -#define LLWU_ME_WUME4 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Module Enable for Module 4 */ -#define LLWU_ME_WUME3 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Module Enable for Module 3 */ -#define LLWU_ME_WUME2 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Module Enable for Module 2 */ -#define LLWU_ME_WUME1 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Module Enable for Module 1 */ -#define LLWU_ME_WUME0 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Module Enable for Module 0 */ - -/********** Bits definition for LLWU_F1 register *************/ -#define LLWU_F1_WUF7 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Flag for LLWU_P7 */ -#define LLWU_F1_WUF6 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Flag for LLWU_P6 */ -#define LLWU_F1_WUF5 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Flag for LLWU_P5 */ -#define LLWU_F1_WUF4 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Flag for LLWU_P4 */ -#define LLWU_F1_WUF3 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Flag for LLWU_P3 */ -#define LLWU_F1_WUF2 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Flag for LLWU_P2 */ -#define LLWU_F1_WUF1 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Flag for LLWU_P1 */ -#define LLWU_F1_WUF0 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Flag for LLWU_P0 */ - -/********** Bits definition for LLWU_F2 register *************/ -#define LLWU_F2_WUF15 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Flag for LLWU_P15 */ -#define LLWU_F2_WUF14 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Flag for LLWU_P14 */ -#define LLWU_F2_WUF13 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Flag for LLWU_P13 */ -#define LLWU_F2_WUF12 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Flag for LLWU_P12 */ -#define LLWU_F2_WUF11 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Flag for LLWU_P11 */ -#define LLWU_F2_WUF10 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Flag for LLWU_P10 */ -#define LLWU_F2_WUF9 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Flag for LLWU_P9 */ -#define LLWU_F2_WUF8 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Flag for LLWU_P8 */ - -/********** Bits definition for LLWU_F3 register *************/ -#define LLWU_F3_MWUF7 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Flag for Module 7 */ -#define LLWU_F3_MWUF6 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Flag for Module 6 */ -#define LLWU_F3_MWUF5 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Flag for Module 5 */ -#define LLWU_F3_MWUF4 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Flag for Module 4 */ -#define LLWU_F3_MWUF3 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Flag for Module 3 */ -#define LLWU_F3_MWUF2 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Flag for Module 2 */ -#define LLWU_F3_MWUF1 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Flag for Module 1 */ -#define LLWU_F3_MWUF0 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Flag for Module 0 */ - -/********** Bits definition for LLWU_FILT1 register *************/ -#define LLWU_FILT1_FILTF ((uint8_t)((uint8_t)1 << 7)) /*!< Filter Detect Flag */ -#define LLWU_FILT1_FILTE_SHIFT 5 /*!< Digital Filter on External Pin (shift) */ -#define LLWU_FILT1_FILTE_MASK ((uint8_t)((uint8_t)0x03 << LLWU_FILT1_FILTE_SHIFT)) /*!< Digital Filter on External Pin (mask) */ -#define LLWU_FILT1_FILTE(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT1_FILTE_SHIFT) & LLWU_FILT1_FILTE_MASK)) /*!< Digital Filter on External Pin */ -#define LLWU_FILT1_FILTE_DISABLED LLWU_FILT1_FILTE(0) /*!< Filter disabled */ -#define LLWU_FILT1_FILTE_POSEDGE LLWU_FILT1_FILTE(1) /*!< Filter posedge detect enabled */ -#define LLWU_FILT1_FILTE_NEGEDGE LLWU_FILT1_FILTE(2) /*!< Filter negedge detect enabled */ -#define LLWU_FILT1_FILTE_ANYEDGE LLWU_FILT1_FILTE(3) /*!< Filter any edge detect enabled */ -#define LLWU_FILT1_FILTSEL_SHIFT 0 /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (shift) */ -#define LLWU_FILT1_FILTSEL_MASK ((uint8_t)((uint8_t)0x0F << LLWU_FILT1_FILTSEL_SHIFT)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (mask) */ -#define LLWU_FILT1_FILTSEL(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT1_FILTSEL_SHIFT) & LLWU_FILT1_FILTSEL_MASK)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) */ - -/********** Bits definition for LLWU_FILT2 register *************/ -#define LLWU_FILT2_FILTF ((uint8_t)((uint8_t)1 << 7)) /*!< Filter Detect Flag */ -#define LLWU_FILT2_FILTE_SHIFT 5 /*!< Digital Filter on External Pin (shift) */ -#define LLWU_FILT2_FILTE_MASK ((uint8_t)((uint8_t)0x03 << LLWU_FILT2_FILTE_SHIFT)) /*!< Digital Filter on External Pin (mask) */ -#define LLWU_FILT2_FILTE(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT2_FILTE_SHIFT) & LLWU_FILT2_FILTE_MASK)) /*!< Digital Filter on External Pin */ -#define LLWU_FILT2_FILTE_DISABLED LLWU_FILT2_FILTE(0) /*!< Filter disabled */ -#define LLWU_FILT2_FILTE_POSEDGE LLWU_FILT2_FILTE(1) /*!< Filter posedge detect enabled */ -#define LLWU_FILT2_FILTE_NEGEDGE LLWU_FILT2_FILTE(2) /*!< Filter negedge detect enabled */ -#define LLWU_FILT2_FILTE_ANYEDGE LLWU_FILT2_FILTE(3) /*!< Filter any edge detect enabled */ -#define LLWU_FILT2_FILTSEL_SHIFT 0 /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (shift) */ -#define LLWU_FILT2_FILTSEL_MASK ((uint8_t)((uint8_t)0x0F << LLWU_FILT2_FILTSEL_SHIFT)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (mask) */ -#define LLWU_FILT2_FILTSEL(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT2_FILTSEL_SHIFT) & LLWU_FILT2_FILTSEL_MASK)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) */ - -/****************************************************************/ -/* */ -/* Port Control and interrupts (PORT) */ -/* */ -/****************************************************************/ -/******** Bits definition for PORTx_PCRn register *************/ -#define PORTx_PCRn_ISF ((uint32_t)0x01000000) /*!< Interrupt Status Flag */ -#define PORTx_PCRn_IRQC_SHIFT 16 -#define PORTx_PCRn_IRQC_MASK ((uint32_t)((uint32_t)0xF << PORTx_PCRn_IRQC_SHIFT)) -#define PORTx_PCRn_IRQC(x) ((uint32_t)(((uint32_t)(x) << PORTx_PCRn_IRQC_SHIFT) & PORTx_PCRn_IRQC_MASK)) -#define PORTx_PCRn_LK ((uint32_t)0x00008000) /*!< Lock Register */ -#define PORTx_PCRn_MUX_SHIFT 8 /*!< Pin Mux Control (shift) */ -#define PORTx_PCRn_MUX_MASK ((uint32_t)((uint32_t)0x7 << PORTx_PCRn_MUX_SHIFT)) /*!< Pin Mux Control (mask) */ -#define PORTx_PCRn_MUX(x) ((uint32_t)(((uint32_t)(x) << PORTx_PCRn_MUX_SHIFT) & PORTx_PCRn_MUX_MASK)) /*!< Pin Mux Control */ -#define PORTx_PCRn_DSE ((uint32_t)0x00000040) /*!< Drive Strength Enable */ -#define PORTx_PCRn_ODE ((uint32_t)0x00000020) /*!< Open Drain Enable */ -#define PORTx_PCRn_PFE ((uint32_t)0x00000010) /*!< Passive Filter Enable */ -#define PORTx_PCRn_SRE ((uint32_t)0x00000004) /*!< Slew Rate Enable */ -#define PORTx_PCRn_PE ((uint32_t)0x00000002) /*!< Pull Enable */ -#define PORTx_PCRn_PS ((uint32_t)0x00000001) /*!< Pull Select */ - -/****************************************************************/ -/* */ -/* Oscillator (OSC) */ -/* */ -/****************************************************************/ -/*********** Bits definition for OSC_CR register **************/ -#define OSC_CR_ERCLKEN ((uint8_t)0x80) /*!< External Reference Enable */ -#define OSC_CR_EREFSTEN ((uint8_t)0x20) /*!< External Reference Stop Enable */ -#define OSC_CR_SC2P ((uint8_t)0x08) /*!< Oscillator 2pF Capacitor Load Configure */ -#define OSC_CR_SC4P ((uint8_t)0x04) /*!< Oscillator 4pF Capacitor Load Configure */ -#define OSC_CR_SC8P ((uint8_t)0x02) /*!< Oscillator 8pF Capacitor Load Configure */ -#define OSC_CR_SC16P ((uint8_t)0x01) /*!< Oscillator 16pF Capacitor Load Configure */ - -/****************************************************************/ -/* */ -/* Direct Memory Access (DMA) */ -/* */ -/****************************************************************/ -/* ---------------------------------------------------------------------------- - -- DMA - Register accessor macros - ---------------------------------------------------------------------------- */ - -/*! - * @addtogroup DMA_Register_Accessor_Macros DMA - Register accessor macros - * @{ - */ - - -/* DMA - Register accessors */ -#define DMA_CR_REG(base) ((base)->CR) -#define DMA_ES_REG(base) ((base)->ES) -#define DMA_ERQ_REG(base) ((base)->ERQ) -#define DMA_EEI_REG(base) ((base)->EEI) -#define DMA_CEEI_REG(base) ((base)->CEEI) -#define DMA_SEEI_REG(base) ((base)->SEEI) -#define DMA_CERQ_REG(base) ((base)->CERQ) -#define DMA_SERQ_REG(base) ((base)->SERQ) -#define DMA_CDNE_REG(base) ((base)->CDNE) -#define DMA_SSRT_REG(base) ((base)->SSRT) -#define DMA_CERR_REG(base) ((base)->CERR) -#define DMA_CINT_REG(base) ((base)->CINT) -#define DMA_INT_REG(base) ((base)->INT) -#define DMA_ERR_REG(base) ((base)->ERR) -#define DMA_HRS_REG(base) ((base)->HRS) -#define DMA_DCHPRI3_REG(base) ((base)->DCHPRI3) -#define DMA_DCHPRI2_REG(base) ((base)->DCHPRI2) -#define DMA_DCHPRI1_REG(base) ((base)->DCHPRI1) -#define DMA_DCHPRI0_REG(base) ((base)->DCHPRI0) -#define DMA_SADDR_REG(base,index) ((base)->TCD[index].SADDR) -#define DMA_SOFF_REG(base,index) ((base)->TCD[index].SOFF) -#define DMA_ATTR_REG(base,index) ((base)->TCD[index].ATTR) -#define DMA_NBYTES_MLNO_REG(base,index) ((base)->TCD[index].NBYTES_MLNO) -#define DMA_NBYTES_MLOFFNO_REG(base,index) ((base)->TCD[index].NBYTES_MLOFFNO) -#define DMA_NBYTES_MLOFFYES_REG(base,index) ((base)->TCD[index].NBYTES_MLOFFYES) -#define DMA_SLAST_REG(base,index) ((base)->TCD[index].SLAST) -#define DMA_DADDR_REG(base,index) ((base)->TCD[index].DADDR) -#define DMA_DOFF_REG(base,index) ((base)->TCD[index].DOFF) -#define DMA_CITER_ELINKNO_REG(base,index) ((base)->TCD[index].CITER_ELINKNO) -#define DMA_CITER_ELINKYES_REG(base,index) ((base)->TCD[index].CITER_ELINKYES) -#define DMA_DLAST_SGA_REG(base,index) ((base)->TCD[index].DLAST_SGA) -#define DMA_CSR_REG(base,index) ((base)->TCD[index].CSR) -#define DMA_BITER_ELINKNO_REG(base,index) ((base)->TCD[index].BITER_ELINKNO) -#define DMA_BITER_ELINKYES_REG(base,index) ((base)->TCD[index].BITER_ELINKYES) - -/*! - * @} - */ /* end of group DMA_Register_Accessor_Macros */ - - -/* ---------------------------------------------------------------------------- - -- DMA Register Masks - ---------------------------------------------------------------------------- */ - -/*! - * @addtogroup DMA_Register_Masks DMA Register Masks - * @{ - */ - -/* CR Bit Fields */ -#define DMA_CR_EDBG_MASK 0x2u -#define DMA_CR_EDBG_SHIFT 1 -#define DMA_CR_ERCA_MASK 0x4u -#define DMA_CR_ERCA_SHIFT 2 -#define DMA_CR_HOE_MASK 0x10u -#define DMA_CR_HOE_SHIFT 4 -#define DMA_CR_HALT_MASK 0x20u -#define DMA_CR_HALT_SHIFT 5 -#define DMA_CR_CLM_MASK 0x40u -#define DMA_CR_CLM_SHIFT 6 -#define DMA_CR_EMLM_MASK 0x80u -#define DMA_CR_EMLM_SHIFT 7 -#define DMA_CR_ECX_MASK 0x10000u -#define DMA_CR_ECX_SHIFT 16 -#define DMA_CR_CX_MASK 0x20000u -#define DMA_CR_CX_SHIFT 17 -/* ES Bit Fields */ -#define DMA_ES_DBE_MASK 0x1u -#define DMA_ES_DBE_SHIFT 0 -#define DMA_ES_SBE_MASK 0x2u -#define DMA_ES_SBE_SHIFT 1 -#define DMA_ES_SGE_MASK 0x4u -#define DMA_ES_SGE_SHIFT 2 -#define DMA_ES_NCE_MASK 0x8u -#define DMA_ES_NCE_SHIFT 3 -#define DMA_ES_DOE_MASK 0x10u -#define DMA_ES_DOE_SHIFT 4 -#define DMA_ES_DAE_MASK 0x20u -#define DMA_ES_DAE_SHIFT 5 -#define DMA_ES_SOE_MASK 0x40u -#define DMA_ES_SOE_SHIFT 6 -#define DMA_ES_SAE_MASK 0x80u -#define DMA_ES_SAE_SHIFT 7 -#define DMA_ES_ERRCHN_MASK 0xF00u -#define DMA_ES_ERRCHN_SHIFT 8 -#define DMA_ES_ERRCHN(x) (((uint32_t)(((uint32_t)(x))<. -*/ - -/* - * ST32F103x8 memory setup. - */ -MEMORY -{ - flash : org = 0x08000000, len = 64k - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/ports/ARMCMx/compilers/GCC/ld/STM32F103xC.ld b/ChibiOS_16.1.5/community/os/common/ports/ARMCMx/compilers/GCC/ld/STM32F103xC.ld deleted file mode 100644 index 705a44f..0000000 --- a/ChibiOS_16.1.5/community/os/common/ports/ARMCMx/compilers/GCC/ld/STM32F103xC.ld +++ /dev/null @@ -1,50 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio. - - This file is part of ChibiOS. - - ChibiOS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - * ST32F103xC memory setup. - */ -MEMORY -{ - flash : org = 0x08000000, len = 256k - ram0 : org = 0x20000000, len = 48k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.c b/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.c deleted file mode 100644 index 7a8d7f2..0000000 --- a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/nilcore.c - * @brief MSP430X port code. - * - * @addtogroup MSP430X_CORE - * @{ - */ - -#include "ch.h" - -/*===========================================================================*/ -/* Module local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported functions. */ -/*===========================================================================*/ - -/** - * @brief Performs a context switch between two threads. - * @details This is the most critical code in any port, this function - * is responsible for the context switch between 2 threads. - * @note The implementation of this code affects directly the context - * switch performance so optimize here as much as you can. - * - * @param[in] ntp the thread to be switched in - * @param[in] otp the thread to be switched out - */ -#if !(__GNUC__ < 6 && __GNUC_MINOR__ < 4) || defined(__OPTIMIZE__) -__attribute__((naked)) -#endif -void _port_switch(thread_t *ntp, thread_t *otp) { -#if (__GNUC__ < 6 && __GNUC_MINOR__ < 4) && !defined(__OPTIMIZE__) - asm volatile ("add #4, r1"); -#endif - (void)(ntp); - (void)(otp); -#if defined(__MSP430X_LARGE__) - asm volatile ("pushm.a #7, R10"); - asm volatile ("mova r1, @R13"); - asm volatile ("mova @R12, r1"); - asm volatile ("popm.a #7, R10"); - asm volatile ("reta"); -#else - asm volatile ("pushm.w #7, R10"); - asm volatile ("mov r1, @R13"); - asm volatile ("mov @R12, r1"); - asm volatile ("popm.w #7, R10"); - asm volatile ("ret"); -#endif -} - -/** - * @brief Start a thread by invoking its work function. - * @details If the work function returns @p chThdExit() is automatically - * invoked. - */ -void _port_thread_start(void) { - - /* See PORT_SETUP_CONTEXT in nilcore.h */ - chSysUnlock(); -#if defined(__MSP430X_LARGE__) - asm volatile ("mova R5, R12"); - asm volatile ("calla R4"); -#else - asm volatile ("mov R5, R12"); - asm volatile ("call R4"); -#endif - chSysHalt(0); -} -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.h b/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.h deleted file mode 100644 index 09f87c4..0000000 --- a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore.h +++ /dev/null @@ -1,437 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/nilcore.h - * @brief MSP430X port macros and structures. - * - * @addtogroup MSP430X_CORE - * @{ - */ - -#ifndef CHCORE_H -#define CHCORE_H - -#include -#include - -/*===========================================================================*/ -/* Module constants. */ -/*===========================================================================*/ - -/** - * @name Architecture and Compiler - * @{ - */ -/** - * @brief Macro defining the port architecture. - */ -#define PORT_ARCHITECTURE_MSP430X - -/** - * @brief Name of the implemented architecture. - */ -#define PORT_ARCHITECTURE_NAME "MSP430X" - -/** - * @brief Name of the architecture variant. - */ -#define PORT_CORE_VARIANT_NAME "MSP430Xv2" - -/* The following code is not processed when the file is included from an - * asm module because those intrinsic macrosa re not necessarily defined - * by the assembler too.*/ -#if !defined(_FROM_ASM_) - -/** - * @brief Compiler name and version. - */ -#if defined(__GNUC__) || defined(__DOXYGEN__) -#define PORT_COMPILER_NAME "GCC " __VERSION__ - -#else -#error "unsupported compiler" -#endif - -#endif /* !defined(_FROM_ASM_) */ -/** - * @brief Port-specific information string. - */ -#define PORT_INFO "16 bits code addressing" - -/** - * @brief This port supports a realtime counter. - */ -#define PORT_SUPPORTS_RT FALSE -/** @} */ - -/*===========================================================================*/ -/* Module pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief Stack size for the system idle thread. - * @details This size depends on the idle thread implementation, usually - * the idle thread should take no more space than those reserved - * by @p PORT_INT_REQUIRED_STACK. - * @note In this port it is set to 8. - */ -#if !defined(PORT_IDLE_THREAD_STACK_SIZE) || defined(__DOXYGEN__) -#define PORT_IDLE_THREAD_STACK_SIZE 8 -#endif - -/** - * @brief Per-thread stack overhead for interrupts servicing. - * @details This constant is used in the calculation of the correct working - * area size. - * @note In this port the default is 32 bytes per thread. - */ -#if !defined(PORT_INT_REQUIRED_STACK) || defined(__DOXYGEN__) -#define PORT_INT_REQUIRED_STACK 32 -#endif - -/** - * @brief Enables an alternative timer implementation. - * @details Usually the port uses a timer interface defined in the file - * @p nilcore_timer.h, if this option is enabled then the file - * @p nilcore_timer_alt.h is included instead. - */ -#if !defined(PORT_USE_ALT_TIMER) -#define PORT_USE_ALT_TIMER FALSE -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module data structures and types. */ -/*===========================================================================*/ - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/** - * @brief Type of stack and memory alignment enforcement. - */ -typedef uint16_t stkalign_t; - -/** - * @brief Type of natural register size - depends on memory model. - */ -#if defined(__MSP430X_LARGE__) -typedef unsigned __int20 reg_t; -#else -typedef uint16_t reg_t; -#endif - -/** - * @brief Natural alignment constant. - * @note It is the minimum alignment for pointer-size variables. - */ -#define PORT_NATURAL_ALIGN 2U - -/** - * @brief Stack alignment constant. - * @note It is the alignement required for the stack pointer. - */ -#define PORT_STACK_ALIGN 2U - -/** - * @brief Working Areas alignment constant. - * @note It is the alignment to be enforced for thread working areas. - */ -#define PORT_WORKING_AREA_ALIGN 2U -/** @} */ - -/** - * @brief System saved context. - * @details This structure represents the inner stack frame during a context - * switching. - */ -struct port_intctx { - reg_t r4; - reg_t r5; - reg_t r6; - reg_t r7; - reg_t r8; - reg_t r9; - reg_t r10; - reg_t r0; /* program counter */ -}; - -/** - * @brief Platform dependent part of the @p thread_t structure. - * @details This structure usually contains just the saved stack pointer - * defined as a pointer to a @p port_intctx structure. - */ -struct port_context { - struct port_intctx *sp; -}; - -#endif /* !defined(_FROM_ASM_) */ - -/*===========================================================================*/ -/* Module macros. */ -/*===========================================================================*/ - -/** - * @brief Platform dependent thread stack setup. - * @details This code usually setup the context switching frame represented - * by an @p port_intctx structure. - */ -#define PORT_SETUP_CONTEXT(tp, wbase, wtop, pf, arg) { \ - (tp)->ctx.sp = (struct port_intctx*)(((uint8_t *)(wtop)) - \ - sizeof(struct port_intctx)); \ - (tp)->ctx.sp->r4 = (reg_t)pf; \ - (tp)->ctx.sp->r5 = (reg_t)arg; \ - (tp)->ctx.sp->r0 = (reg_t)_port_thread_start; \ -} - -/** - * @brief Static working area allocation. - * @details This macro is used to allocate a static thread working area - * aligned as both position and size. - * - * @param[in] s the name to be assigned to the stack array - * @param[in] n the stack size to be assigned to the thread - */ -#define PORT_WORKING_AREA(s, n) \ - stkalign_t s[THD_WORKING_AREA_SIZE(n) / sizeof (stkalign_t)] - -/** - * @brief Computes the thread working area global size. - * @note There is no need to perform alignments in this macro. - */ -#define PORT_WA_SIZE(n) ((sizeof(struct port_intctx) - 1) + \ - (n) + (PORT_INT_REQUIRED_STACK)) - -/** - * @brief IRQ prologue code. - * @details This macro must be inserted at the start of all IRQ handlers - * enabled to invoke system APIs. - */ -#define PORT_IRQ_PROLOGUE() - -/** - * @brief IRQ epilogue code. - * @details This macro must be inserted at the end of all IRQ handlers - * enabled to invoke system APIs. - */ -#define PORT_IRQ_EPILOGUE() chSchRescheduleS() - -/** - * @brief IRQ handler function declaration. - * @note @p id can be a function name or a vector number depending on the - * port implementation. - */ -#define PORT_IRQ_HANDLER(id) __attribute__ ((interrupt(id))) \ - void ISR_ ## id (void) - -/** - * @brief Fast IRQ handler function declaration. - * @note @p id can be a function name or a vector number depending on the - * port implementation. - */ -#define PORT_FAST_IRQ_HANDLER(id) PORT_IRQ_HANDLER(id) - -/** - * @brief Performs a context switch between two threads. - * @details This is the most critical code in any port, this function - * is responsible for the context switch between 2 threads. - * @note The implementation of this code affects directly the context - * switch performance so optimize here as much as you can. - * - * @param[in] ntp the thread to be switched in - * @param[in] otp the thread to be switched out - */ -#define port_switch(ntp, otp) _port_switch(ntp, otp) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -#ifdef __cplusplus -extern "C" { -#endif - void _port_irq_epilogue(void); - void _port_switch(thread_t *ntp, thread_t *otp); - void _port_thread_start(void); -#ifdef __cplusplus -} -#endif - -#endif /* !defined(_FROM_ASM_) */ - -/*===========================================================================*/ -/* Module inline functions. */ -/*===========================================================================*/ - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/** - * @brief Port-related initialization code. - */ -static inline void port_init(void) { - -} - -/** - * @brief Returns a word encoding the current interrupts status. - * - * @return The interrupts status. - */ -static inline syssts_t port_get_irq_status(void) { - - return __get_SR_register(); -} - -/** - * @brief Checks the interrupt status. - * - * @param[in] sts the interrupt status word - * - * @return The interrupt status. - * @retvel false the word specified a disabled interrupts status. - * @retvel true the word specified an enabled interrupts status. - */ -static inline bool port_irq_enabled(syssts_t sts) { - - return sts & GIE; -} - -/** - * @brief Determines the current execution context. - * - * @return The execution context. - * @retval false not running in ISR mode. - * @retval true running in ISR mode. - */ -static inline bool port_is_isr_context(void) { - /* Efficiency would be enhanced by not doing this, - * because of implementation details */ - return __get_SR_register() & GIE; -} - -/** - * @brief Kernel-lock action. - */ -static inline void port_lock(void) { - - _disable_interrupts(); - asm volatile("nop"); -} - -/** - * @brief Kernel-unlock action. - */ -static inline void port_unlock(void) { - asm volatile("nop"); - _enable_interrupts(); -} - -/** - * @brief Kernel-lock action from an interrupt handler. - * @note This function is empty in this port. - */ -static inline void port_lock_from_isr(void) { - -} - -/** - * @brief Kernel-unlock action from an interrupt handler. - * @note This function is empty in this port. - */ -static inline void port_unlock_from_isr(void) { - -} - -/** - * @brief Disables all the interrupt sources. - */ -static inline void port_disable(void) { - - _disable_interrupts(); - asm volatile("nop"); -} - -/** - * @brief Disables the interrupt sources below kernel-level priority. - */ -static inline void port_suspend(void) { - - _disable_interrupts(); - asm volatile("nop"); -} - -/** - * @brief Enables all the interrupt sources. - */ -static inline void port_enable(void) { - - asm volatile("nop"); - _enable_interrupts(); -} - -/** - * @brief Enters an architecture-dependent IRQ-waiting mode. - * @details The function is meant to return when an interrupt becomes pending. - * The simplest implementation is an empty function or macro but this - * would not take advantage of architecture-specific power saving - * modes. - */ -static inline void port_wait_for_interrupt(void) { - -} - -/** - * @brief Returns the current value of the realtime counter. - * - * @return The realtime counter value. - */ -static inline rtcnt_t port_rt_get_counter_value(void) { - /* TODO implement realtime counter */ - return 0; -} - -#endif /* !defined(_FROM_ASM_) */ - -/*===========================================================================*/ -/* Module late inclusions. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) - -#if CH_CFG_ST_TIMEDELTA > 0 -#if !PORT_USE_ALT_TIMER -#include "chcore_timer.h" -#else /* PORT_USE_ALT_TIMER */ -#include "chcore_timer_alt.h" -#endif /* PORT_USE_ALT_TIMER */ -#endif /* CH_CFG_ST_TIMEDELTA > 0 */ - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* CHCORE_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore_timer.h b/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore_timer.h deleted file mode 100644 index 87ea514..0000000 --- a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/chcore_timer.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/chcore_timer.h - * @brief System timer header file. - * - * @addtogroup MSP430X_TIMER - * @{ - */ - -#ifndef CHCORE_TIMER_H -#define CHCORE_TIMER_H - -#include "hal_st.h" - -/*===========================================================================*/ -/* Module constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module inline functions. */ -/*===========================================================================*/ - -/** - * @brief Starts the alarm. - * @note Makes sure that no spurious alarms are triggered after - * this call. - * - * @param[in] abstime the time to be set for the first alarm - * - * @notapi - */ -static inline void port_timer_start_alarm(systime_t abstime) { - - stStartAlarm(abstime); -} - -/** - * @brief Stops the alarm interrupt. - * - * @notapi - */ -static inline void port_timer_stop_alarm(void) { - stStopAlarm(); -} - -/** - * @brief Sets the alarm time. - * - * @param[in] abstime the time to be set for the next alarm - * - * @notapi - */ -static inline void port_timer_set_alarm(systime_t abstime) { - - stSetAlarm(abstime); -} - -/** - * @brief Returns the system time. - * - * @return The system time. - * - * @notapi - */ -static inline systime_t port_timer_get_time(void) { - - return stGetCounter(); -} - -/** - * @brief Returns the current alarm time. - * - * @return The currently set alarm time. - * - * @notapi - */ -static inline systime_t port_timer_get_alarm(void) { - - return stGetAlarm(); -} - -#endif /* CHCORE_TIMER_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/chtypes.h b/ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/chtypes.h deleted file mode 100644 index 46a074c..0000000 --- a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/chtypes.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/compilers/GCC/chtypes.h - * @brief MSP430X port system types. - * - * @addtogroup MSP430X_GCC_CORE - * @{ - */ - -#ifndef CHTYPES_H -#define CHTYPES_H - -#include -#include -#include - -/** - * @name Common constants - */ -/** - * @brief Generic 'false' boolean constant. - */ -#if !defined(FALSE) || defined(__DOXYGEN__) -#define FALSE 0 -#endif - -/** - * @brief Generic 'true' boolean constant. - */ -#if !defined(TRUE) || defined(__DOXYGEN__) -#define TRUE 1 -#endif -/** @} */ - -/** - * @name Kernel types - * @{ - */ -typedef uint16_t rtcnt_t; /**< Realtime counter. */ -typedef uint64_t rttime_t; /**< Realtime accumulator. */ -typedef uint16_t syssts_t; /**< System status word. */ -typedef uint8_t tmode_t; /**< Thread flags. */ -typedef uint8_t tstate_t; /**< Thread state. */ -typedef uint8_t trefs_t; /**< Thread references counter. */ -typedef uint8_t tslices_t; /**< Thread time slices counter.*/ -typedef uint8_t tprio_t; /**< Thread priority. */ -typedef int16_t msg_t; /**< Inter-thread message. */ -typedef int32_t eventid_t; /**< Numeric event identifier. */ -typedef uint8_t eventmask_t; /**< Mask of event identifiers. */ -typedef int16_t cnt_t; /**< Generic signed counter. */ -typedef uint16_t ucnt_t; /**< Generic unsigned counter. */ - -/** - * @brief ROM constant modifier. - * @note It is set to use the "const" keyword in this port. - */ -#define ROMCONST const - -/** - * @brief Makes functions not inlineable. - * @note If the compiler does not support such attribute then the - * realtime counter precision could be degraded. - */ -#define NOINLINE __attribute__((noinline)) - -/** - * @brief Optimized thread function declaration macro. - */ -#define PORT_THD_FUNCTION(tname, arg) \ - void tname(void *arg) - -/** - * @brief Packed variable specifier. - */ -#define PACKED_VAR __attribute__((packed)) - -/** - * @brief Memory alignment enforcement for variables. - */ -#define ALIGNED_VAR(n) __attribute__((aligned(n))) - -/** - * @brief Size of a pointer. - * @note To be used where the sizeof operator cannot be used, preprocessor - * expressions for example. - */ -#define SIZEOF_PTR 4 - -/** - * @brief True if alignment is low-high in current architecture. - */ -#define REVERSE_ORDER 1 - -#endif /* CHTYPES_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/mk/port.mk b/ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/mk/port.mk deleted file mode 100644 index 0ef5378..0000000 --- a/ChibiOS_16.1.5/community/os/common/ports/MSP430X/compilers/GCC/mk/port.mk +++ /dev/null @@ -1,7 +0,0 @@ -# List of the ChibiOS/RT MSP430X port files. -PORTSRC = ${CHIBIOS_CONTRIB}/os/common/ports/MSP430X/chcore.c - -PORTASM = - -PORTINC = ${CHIBIOS_CONTRIB}/os/common/ports/MSP430X \ - ${CHIBIOS_CONTRIB}/os/common/ports/MSP430X/compilers/GCC diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128.ld deleted file mode 100644 index 1725c78..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128.ld +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * MK20DX128 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 128k - 0x410 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFE000, len = 16k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR3.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR3.ld deleted file mode 100644 index 986de7c..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR3.ld +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * MK20DX128 memory setup (3k bootloader section). - */ -MEMORY -{ - flash0 : org = 0x00000c00, len = 128k - 0xc00 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFE000, len = 16k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR4.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR4.ld deleted file mode 100644 index f00dc37..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX128BLDR4.ld +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * MK20DX128 memory setup (4k bootloader section). - */ -MEMORY -{ - flash0 : org = 0x00001000, len = 128k - 0x1000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFE000, len = 16k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256.ld deleted file mode 100644 index 66bc6b8..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256.ld +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * MK20DX256 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x400 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 256k - 0x410 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFF8000, len = 64k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256BLDR8.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256BLDR8.ld deleted file mode 100644 index 20c3000..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MK20DX256BLDR8.ld +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * MK20DX256 memory setup (8k bootloader section). - */ -MEMORY -{ - flash0 : org = 0x00002000, len = 256k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFF8000, len = 64k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL26Z64.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL26Z64.ld deleted file mode 100644 index 6527edc..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL26Z64.ld +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 64k - 0x410 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL27Z256.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL27Z256.ld deleted file mode 100644 index f0f107a..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL27Z256.ld +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL27Z256 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 256k - 0x410 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFE000, len = 32k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL2xZ128.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL2xZ128.ld deleted file mode 100644 index e2a5e4a..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/MKL2xZ128.ld +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL2xZ128 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 128k - 0x410 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF000, len = 16k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/NRF51822.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/NRF51822.ld deleted file mode 100644 index d4db7d4..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/NRF51822.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * NRF51822 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 256k - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 32k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xC3.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xC3.ld deleted file mode 100644 index da05e8a..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xC3.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123xC3 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 32k - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 12k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xD5.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xD5.ld deleted file mode 100644 index 1a1c89e..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xD5.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123xD5 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 64k - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 24k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xE6.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xE6.ld deleted file mode 100644 index 254cb3a..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xE6.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123xE6 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 128k - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 32k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xH6.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xH6.ld deleted file mode 100644 index f73f9ec..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C123xH6.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123xH6 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 256k - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 32k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xKC.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xKC.ld deleted file mode 100644 index 0463ba0..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xKC.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C129xKC memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 512k - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 256k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xNC.ld b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xNC.ld deleted file mode 100644 index f1846ca..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/ld/TM4C129xNC.ld +++ /dev/null @@ -1,84 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123xH6 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 1m - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 256k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for HEAP segment.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk deleted file mode 100644 index 0c2ec7d..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk +++ /dev/null @@ -1,12 +0,0 @@ -# List of the ChibiOS generic K20x startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c - -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v7m.S - -STARTUPINC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC \ - $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/K20x \ - $(CHIBIOS)/os/common/ext/CMSIS/include \ - $(CHIBIOS_CONTRIB)/os/common/ext/CMSIS/KINETIS - -STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk deleted file mode 100644 index 7ab25de..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +++ /dev/null @@ -1,3 +0,0 @@ -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk - -STARTUPINC += $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/K20x5 diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk deleted file mode 100644 index 3c8ea09..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +++ /dev/null @@ -1,3 +0,0 @@ -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x.mk - -STARTUPINC += $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/K20x7 diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk deleted file mode 100644 index ca67f10..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +++ /dev/null @@ -1,12 +0,0 @@ -# List of the ChibiOS generic KL2x startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c - -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v6m.S - -STARTUPINC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC \ - $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/KL2x \ - $(CHIBIOS)/os/common/ext/CMSIS/include \ - $(CHIBIOS_CONTRIB)/os/common/ext/CMSIS/KINETIS - -STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk deleted file mode 100644 index f005ce0..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk +++ /dev/null @@ -1,10 +0,0 @@ -# List of the ChibiOS generic NRF51 startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c - -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v6m.S - -STARTUPINC = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/NRF51822 \ - $(CHIBIOS)/os/common/ext/CMSIS/include - -STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk deleted file mode 100644 index e9c97e5..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk +++ /dev/null @@ -1,11 +0,0 @@ -# List of the ChibiOS generic TM4C123x startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c - -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v7m.S - -STARTUPINC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC \ - $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/TM4C123x \ - $(CHIBIOS)/os/common/ext/CMSIS/include - -STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk deleted file mode 100644 index e151434..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk +++ /dev/null @@ -1,11 +0,0 @@ -# List of the ChibiOS generic TM4C129x startup and CMSIS files. -STARTUPSRC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt1.c \ - $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/vectors.c - -STARTUPASM = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/crt0_v7m.S - -STARTUPINC = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC \ - $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/devices/TM4C129x \ - $(CHIBIOS)/os/common/ext/CMSIS/include - -STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x5/cmparams.h b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x5/cmparams.h deleted file mode 100644 index 8aebbc0..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x5/cmparams.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2014 Giovanni Di Sirio. - (C) 2015 RedoX https://github.com/RedoXyde - (C) 2016 flabbergast - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file GCC/ARMCMx/K20x5/cmparams.h - * @brief ARM Cortex-M4 parameters for the Kinetis K20x5. - * - * @defgroup ARMCMx_K20x5 Kinetis K20x5 Specific Parameters - * @ingroup ARMCMx_SPECIFIC - * @details This file contains the Cortex-M4 specific parameters for the - * Kinetis K20x5 platform. - * @{ - */ - -#ifndef _CMPARAMS_H_ -#define _CMPARAMS_H_ - -/** - * @brief Cortex core model. - */ -#define CORTEX_MODEL 4 - -/** - * @brief Systick unit presence. - */ -#define CORTEX_HAS_ST TRUE - -/** - * @brief Floating Point unit presence. - */ -#define CORTEX_HAS_FPU FALSE - -/** - * @brief Number of bits in priority masks. - */ -#define CORTEX_PRIORITY_BITS 4 - -/** - * @brief Number of interrupt vectors. - * @note This number does not include the 16 system vectors and must be - * rounded to a multiple of 8. - */ -#define CORTEX_NUM_VECTORS 48 - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/* Including the device CMSIS header. Note, we are not using the definitions - from this header because we need this file to be usable also from - assembler source files. We verify that the info matches instead.*/ -#include "k20x5.h" - -#if CORTEX_MODEL != __CORTEX_M -#error "CMSIS __CORTEX_M mismatch" -#endif - -#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS -#error "CMSIS __NVIC_PRIO_BITS mismatch" -#endif - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* _CMPARAMS_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x7/cmparams.h b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x7/cmparams.h deleted file mode 100644 index afb3053..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/K20x7/cmparams.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2014 Giovanni Di Sirio. - (C) 2015 RedoX https://github.com/RedoXyde - (C) 2016 flabbergast - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file GCC/ARMCMx/K20x7/cmparams.h - * @brief ARM Cortex-M4 parameters for the Kinetis K20x7. - * - * @defgroup ARMCMx_K20x7 Kinetis K20x7 Specific Parameters - * @ingroup ARMCMx_SPECIFIC - * @details This file contains the Cortex-M4 specific parameters for the - * Kinetis K20x7 platform. - * @{ - */ - -#ifndef _CMPARAMS_H_ -#define _CMPARAMS_H_ - -/** - * @brief Cortex core model. - */ -#define CORTEX_MODEL 4 - -/** - * @brief Systick unit presence. - */ -#define CORTEX_HAS_ST TRUE - -/** - * @brief Floating Point unit presence. - */ -#define CORTEX_HAS_FPU FALSE - -/** - * @brief Number of bits in priority masks. - */ -#define CORTEX_PRIORITY_BITS 4 - -/** - * @brief Number of interrupt vectors. - * @note This number does not include the 16 system vectors and must be - * rounded to a multiple of 8. - */ -#define CORTEX_NUM_VECTORS 96 - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/* Including the device CMSIS header. Note, we are not using the definitions - from this header because we need this file to be usable also from - assembler source files. We verify that the info matches instead.*/ -#include "k20x7.h" - -#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS -#error "CMSIS __NVIC_PRIO_BITS mismatch" -#endif - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* _CMPARAMS_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/KL2x/cmparams.h b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/KL2x/cmparams.h deleted file mode 100644 index 93a7055..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/KL2x/cmparams.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2014 Giovanni Di Sirio. - (C) 2015 RedoX https://github.com/RedoXyde - (C) 2016 flabbergast - - This file is part of ChibiOS. - - ChibiOS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file KL2x/cmparams.h - * @brief ARM Cortex-M0+ parameters for the Kinetis KL2x family. - * - * @defgroup ARMCMx_KL2x Kinetis KL2x Specific Parameters - * @ingroup ARMCMx_SPECIFIC - * @details This file contains the Cortex-M0+ specific parameters for the - * Kinetis KL2x platform. - * @{ - */ - -#ifndef _CMPARAMS_H_ -#define _CMPARAMS_H_ - -/** - * @brief Cortex core model. - */ -#define CORTEX_MODEL 0 - -/** - * @brief Systick unit presence. - */ -#define CORTEX_HAS_ST TRUE - -/** - * @brief Floating Point unit presence. - */ -#define CORTEX_HAS_FPU FALSE - -/** - * @brief Number of bits in priority masks. - */ -#define CORTEX_PRIORITY_BITS 2 - -/** - * @brief Number of interrupt vectors. - * @note This number does not include the 16 system vectors and must be - * rounded to a multiple of 8. - */ -#define CORTEX_NUM_VECTORS 32 - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/* If the device type is not externally defined, for example from the Makefile, - then a file named board.h is included. This file must contain a device - definition compatible with the vendor include file.*/ -#if !defined (KL25) && !defined (KL26) && \ - !defined (KL27Zxxx) && !defined (KL27Zxx) -#include "board.h" -#endif - -/* Including the device CMSIS header. Note, we are not using the definitions - from this header because we need this file to be usable also from - assembler source files. We verify that the info matches instead.*/ -#include "kl2xz.h" - -#if CORTEX_MODEL != __CORTEX_M -#error "CMSIS __CORTEX_M mismatch" -#endif - -#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS -#error "CMSIS __NVIC_PRIO_BITS mismatch" -#endif - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* _CMPARAMS_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/NRF51822/cmparams.h b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/NRF51822/cmparams.h deleted file mode 100644 index 126acf6..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/NRF51822/cmparams.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - This file is part of ChibiOS. - - ChibiOS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file NRF51822/cmparams.h - * @brief ARM Cortex-M0 parameters for the Nordic Semi NRF51822 family. - * - * @defgroup ARMCMx_NRF51x Nordic semiconductor NRF51x. - * @ingroup ARMCMx_SPECIFIC - * @details This file contains the Cortex-M0 specific parameters for the - * NRF51x platform. - * @{ - */ - -#ifndef _CMPARAMS_H_ -#define _CMPARAMS_H_ - -/** - * @brief Cortex core model. - */ -#define CORTEX_MODEL 0 - -/** - * @brief Memory Protection unit presence. - */ -#define CORTEX_HAS_MPU 1 - -/** - * @brief Floating Point unit presence. - */ -#define CORTEX_HAS_FPU 0 - -/** - * @brief Number of bits in priority masks. - */ -#define CORTEX_PRIORITY_BITS 2 - -/** - * @brief Number of interrupt vectors. - * @note This number does not include the 16 system vectors and must be - * rounded to a multiple of 8. - */ -#define CORTEX_NUM_VECTORS 32 - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/* Including the device CMSIS header. Note, we are not using the definitions - from this header because we need this file to be usable also from - assembler source files. We verify that the info matches instead.*/ -#include "nrf51.h" - -#if CORTEX_MODEL != __CORTEX_M -#error "CMSIS __CORTEX_M mismatch" -#endif - -#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS -#error "CMSIS __NVIC_PRIO_BITS mismatch" -#endif - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* _CMPARAMS_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h deleted file mode 100644 index 933e111..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C123x/cmparams.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TM4C123x/cmparams.h - * @brief ARM Cortex-M4 parameters for the TM4C123x. - * @{ - */ - -#ifndef _CMPARAMS_H_ -#define _CMPARAMS_H_ - -/** - * @brief Cortex core model. - */ -#define CORTEX_MODEL 4 - -/** - * @brief Memory Protection unit presence. - */ -#define CORTEX_HAS_MPU 1 - -/** - * @brief Floating Point unit presence. - */ -#define CORTEX_HAS_FPU 1 - -/** - * @brief Number of bits in priority masks. - */ -#define CORTEX_PRIORITY_BITS 3 - -/** - * @brief Number of interrupt vectors. - * @note This number does not include the 16 system vectors and must be - * rounded to a multiple of 8. - */ -#define CORTEX_NUM_VECTORS 144 - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/* If the device type is not externally defined, for example from the Makefile, - then a file named board.h is included. This file must contain a device - definition compatible with the include file.*/ -#if !defined(TM4C1230C3PM) && !defined(TM4C1230D5PM) && \ - !defined(TM4C1230E6PM) && !defined(TM4C1230H6PM) && \ - !defined(TM4C1231C3PM) && !defined(TM4C1231D5PM) && \ - !defined(TM4C1231D5PZ) && !defined(TM4C1231E6PM) && \ - !defined(TM4C1231E6PZ) && !defined(TM4C1231H6PGE) && \ - !defined(TM4C1231H6PM) && !defined(TM4C1231H6PZ) && \ - !defined(TM4C1232C3PM) && !defined(TM4C1232D5PM) && \ - !defined(TM4C1232E6PM) && !defined(TM4C1232H6PM) && \ - !defined(TM4C1233C3PM) && !defined(TM4C1233D5PM) && \ - !defined(TM4C1233D5PZ) && !defined(TM4C1233E6PM) && \ - !defined(TM4C1233E6PZ) && !defined(TM4C1233H6PGE) && \ - !defined(TM4C1233H6PM) && !defined(TM4C1233H6PZ) && \ - !defined(TM4C1236D5PM) && !defined(TM4C1236E6PM) && \ - !defined(TM4C1236H6PM) && !defined(TM4C1237D5PM) && \ - !defined(TM4C1237D5PZ) && !defined(TM4C1237E6PM) && \ - !defined(TM4C1237E6PZ) && !defined(TM4C1237H6PGE) && \ - !defined(TM4C1237H6PM) && !defined(TM4C1237H6PZ) && \ - !defined(TM4C123AE6PM) && !defined(TM4C123AH6PM) && \ - !defined(TM4C123BE6PM) && !defined(TM4C123BE6PZ) && \ - !defined(TM4C123BH6PGE) && !defined(TM4C123BH6PM) && \ - !defined(TM4C123BH6PZ) && !defined(TM4C123BH6ZRB) && \ - !defined(TM4C123FE6PM) && !defined(TM4C123FH6PM) && \ - !defined(TM4C123GE6PM) && !defined(TM4C123GE6PZ) && \ - !defined(TM4C123GH6PGE) && !defined(TM4C123GH6PM) && \ - !defined(TM4C123GH6PZ) && !defined(TM4C123GH6ZRB) && \ - !defined(TM4C123GH5ZXR) -#include "board.h" -#endif - -/* Including the device CMSIS header. Note, we are not using the definitions - from this header because we need this file to be usable also from - assembler source files. We verify that the info matches instead.*/ -#include "tm4c123x.h" - -#if !CORTEX_HAS_MPU != !__MPU_PRESENT -#error "CMSIS __MPU_PRESENT mismatch" -#endif - -#if !CORTEX_HAS_FPU != !__FPU_PRESENT -#error "CMSIS __FPU_PRESENT mismatch" -#endif - -#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS -#error "CMSIS __NVIC_PRIO_BITS mismatch" -#endif - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* _CMPARAMS_H_ */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h b/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h deleted file mode 100644 index 1d2661d..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/ARMCMx/devices/TM4C129x/cmparams.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TM4C129x/cmparams.h - * @brief ARM Cortex-M4 parameters for the TM4C129x. - * @{ - */ - -#ifndef _CMPARAMS_H_ -#define _CMPARAMS_H_ - -/** - * @brief Cortex core model. - */ -#define CORTEX_MODEL 4 - -/** - * @brief Memory Protection unit presence. - */ -#define CORTEX_HAS_MPU 1 - -/** - * @brief Floating Point unit presence. - */ -#define CORTEX_HAS_FPU 1 - -/** - * @brief Number of bits in priority masks. - */ -#define CORTEX_PRIORITY_BITS 3 - -/** - * @brief Number of interrupt vectors. - * @note This number does not include the 16 system vectors and must be - * rounded to a multiple of 8. - */ -#define CORTEX_NUM_VECTORS 112 - -/* The following code is not processed when the file is included from an - asm module.*/ -#if !defined(_FROM_ASM_) - -/* If the device type is not externally defined, for example from the Makefile, - then a file named board.h is included. This file must contain a device - definition compatible with the include file.*/ -#if !defined(TM4C1290NCPDT) && !defined(TM4C1290NCZAD) \ - && !defined(TM4C1292NCPDT) && !defined(TM4C1292NCZAD) \ - && !defined(TM4C1294KCPDT) && !defined(TM4C1294NCPDT) \ - && !defined(TM4C1294NCZAD) && !defined(TM4C1297NCZAD) \ - && !defined(TM4C1299KCZAD) && !defined(TM4C1299NCZAD) \ - && !defined(TM4C129CNCPDT) && !defined(TM4C129CNCZAD) \ - && !defined(TM4C129DNCPDT) && !defined(TM4C129DNCZAD) \ - && !defined(TM4C129EKCPDT) && !defined(TM4C129ENCPDT) \ - && !defined(TM4C129ENCZAD) && !defined(TM4C129LNCZAD) \ - && !defined(TM4C129XKCZAD) && !defined(TM4C129XNCZAD) -#include "board.h" -#endif - -/* Including the device CMSIS header. Note, we are not using the definitions - from this header because we need this file to be usable also from - assembler source files. We verify that the info matches instead.*/ -#include "tm4c129x.h" - -#if !CORTEX_HAS_MPU != !__MPU_PRESENT -#error "CMSIS __MPU_PRESENT mismatch" -#endif - -#if !CORTEX_HAS_FPU != !__FPU_PRESENT -#error "CMSIS __FPU_PRESENT mismatch" -#endif - -#if CORTEX_PRIORITY_BITS != __NVIC_PRIO_BITS -#error "CMSIS __NVIC_PRIO_BITS mismatch" -#endif - -#endif /* !defined(_FROM_ASM_) */ - -#endif /* _CMPARAMS_H_ */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr5969.ld b/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr5969.ld deleted file mode 100644 index b618455..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr5969.ld +++ /dev/null @@ -1,390 +0,0 @@ -/* This file supports MSP430FR5969 devices. */ -/* Version: 1.0 */ -/* ChibiOS linker script, for normal executables */ - -OUTPUT_ARCH(msp430) -ENTRY(_start) - -MEMORY { - SFR : ORIGIN = 0x0000, LENGTH = 0x0010 /* END=0x0010, size 16 */ - PERIPHERAL_8BIT : ORIGIN = 0x0010, LENGTH = 0x00F0 /* END=0x0100, size 240 */ - PERIPHERAL_16BIT : ORIGIN = 0x0100, LENGTH = 0x0100 /* END=0x0200, size 256 */ - RAM : ORIGIN = 0x1C00, LENGTH = 0x0800 /* END=0x23FF, size 2048 */ - INFOMEM : ORIGIN = 0x1800, LENGTH = 0x0200 /* END=0x19FF, size 512 as 4 128-byte segments */ - INFOA : ORIGIN = 0x1980, LENGTH = 0x0080 /* END=0x19FF, size 128 */ - INFOB : ORIGIN = 0x1900, LENGTH = 0x0080 /* END=0x197F, size 128 */ - INFOC : ORIGIN = 0x1880, LENGTH = 0x0080 /* END=0x18FF, size 128 */ - INFOD : ORIGIN = 0x1800, LENGTH = 0x0080 /* END=0x187F, size 128 */ - FRAM (rxw) : ORIGIN = 0x4400, LENGTH = 0xBB80 /* END=0xFF7F, size 48000 */ - VECT1 : ORIGIN = 0xFF90, LENGTH = 0x0002 - VECT2 : ORIGIN = 0xFF92, LENGTH = 0x0002 - VECT3 : ORIGIN = 0xFF94, LENGTH = 0x0002 - VECT4 : ORIGIN = 0xFF96, LENGTH = 0x0002 - VECT5 : ORIGIN = 0xFF98, LENGTH = 0x0002 - VECT6 : ORIGIN = 0xFF9A, LENGTH = 0x0002 - VECT7 : ORIGIN = 0xFF9C, LENGTH = 0x0002 - VECT8 : ORIGIN = 0xFF9E, LENGTH = 0x0002 - VECT9 : ORIGIN = 0xFFA0, LENGTH = 0x0002 - VECT10 : ORIGIN = 0xFFA2, LENGTH = 0x0002 - VECT11 : ORIGIN = 0xFFA4, LENGTH = 0x0002 - VECT12 : ORIGIN = 0xFFA6, LENGTH = 0x0002 - VECT13 : ORIGIN = 0xFFA8, LENGTH = 0x0002 - VECT14 : ORIGIN = 0xFFAA, LENGTH = 0x0002 - VECT15 : ORIGIN = 0xFFAC, LENGTH = 0x0002 - VECT16 : ORIGIN = 0xFFAE, LENGTH = 0x0002 - VECT17 : ORIGIN = 0xFFB0, LENGTH = 0x0002 - VECT18 : ORIGIN = 0xFFB2, LENGTH = 0x0002 - VECT19 : ORIGIN = 0xFFB4, LENGTH = 0x0002 - VECT20 : ORIGIN = 0xFFB6, LENGTH = 0x0002 - VECT21 : ORIGIN = 0xFFB8, LENGTH = 0x0002 - VECT22 : ORIGIN = 0xFFBA, LENGTH = 0x0002 - VECT23 : ORIGIN = 0xFFBC, LENGTH = 0x0002 - VECT24 : ORIGIN = 0xFFBE, LENGTH = 0x0002 - VECT25 : ORIGIN = 0xFFC0, LENGTH = 0x0002 - VECT26 : ORIGIN = 0xFFC2, LENGTH = 0x0002 - VECT27 : ORIGIN = 0xFFC4, LENGTH = 0x0002 - VECT28 : ORIGIN = 0xFFC6, LENGTH = 0x0002 - VECT29 : ORIGIN = 0xFFC8, LENGTH = 0x0002 - VECT30 : ORIGIN = 0xFFCA, LENGTH = 0x0002 - VECT31 : ORIGIN = 0xFFCC, LENGTH = 0x0002 - VECT32 : ORIGIN = 0xFFCE, LENGTH = 0x0002 - VECT33 : ORIGIN = 0xFFD0, LENGTH = 0x0002 - VECT34 : ORIGIN = 0xFFD2, LENGTH = 0x0002 - VECT35 : ORIGIN = 0xFFD4, LENGTH = 0x0002 - VECT36 : ORIGIN = 0xFFD6, LENGTH = 0x0002 - VECT37 : ORIGIN = 0xFFD8, LENGTH = 0x0002 - VECT38 : ORIGIN = 0xFFDA, LENGTH = 0x0002 - VECT39 : ORIGIN = 0xFFDC, LENGTH = 0x0002 - VECT40 : ORIGIN = 0xFFDE, LENGTH = 0x0002 - VECT41 : ORIGIN = 0xFFE0, LENGTH = 0x0002 - VECT42 : ORIGIN = 0xFFE2, LENGTH = 0x0002 - VECT43 : ORIGIN = 0xFFE4, LENGTH = 0x0002 - VECT44 : ORIGIN = 0xFFE6, LENGTH = 0x0002 - VECT45 : ORIGIN = 0xFFE8, LENGTH = 0x0002 - VECT46 : ORIGIN = 0xFFEA, LENGTH = 0x0002 - VECT47 : ORIGIN = 0xFFEC, LENGTH = 0x0002 - VECT48 : ORIGIN = 0xFFEE, LENGTH = 0x0002 - VECT49 : ORIGIN = 0xFFF0, LENGTH = 0x0002 - VECT50 : ORIGIN = 0xFFF2, LENGTH = 0x0002 - VECT51 : ORIGIN = 0xFFF4, LENGTH = 0x0002 - VECT52 : ORIGIN = 0xFFF6, LENGTH = 0x0002 - VECT53 : ORIGIN = 0xFFF8, LENGTH = 0x0002 - VECT54 : ORIGIN = 0xFFFA, LENGTH = 0x0002 - VECT55 : ORIGIN = 0xFFFC, LENGTH = 0x0002 - RESETVEC : ORIGIN = 0xFFFE, LENGTH = 0x0002 - BSL : ORIGIN = 0x1000, LENGTH = 0x0800 - HIFRAM (rxw) : ORIGIN = 0x00010000, LENGTH = 0x00003FFF -} - -PHDRS { - vectors PT_LOAD ; - stack PT_LOAD ; - rodata PT_LOAD ; - data PT_LOAD ; - text PT_LOAD ; - upper_rodata PT_LOAD ; - upper_data PT_LOAD ; - upper_text PT_LOAD ; -} - -SECTIONS -{ - __interrupt_vector_1 : { KEEP (*(__interrupt_vector_1 )) } > VECT1 :vectors =0x3C00 - __interrupt_vector_2 : { KEEP (*(__interrupt_vector_2 )) } > VECT2 =0x3C00 - __interrupt_vector_3 : { KEEP (*(__interrupt_vector_3 )) } > VECT3 =0x3C00 - __interrupt_vector_4 : { KEEP (*(__interrupt_vector_4 )) } > VECT4 =0x3C00 - __interrupt_vector_5 : { KEEP (*(__interrupt_vector_5 )) } > VECT5 =0x3C00 - __interrupt_vector_6 : { KEEP (*(__interrupt_vector_6 )) } > VECT6 =0x3C00 - __interrupt_vector_7 : { KEEP (*(__interrupt_vector_7 )) } > VECT7 =0x3C00 - __interrupt_vector_8 : { KEEP (*(__interrupt_vector_8 )) } > VECT8 =0x3C00 - __interrupt_vector_9 : { KEEP (*(__interrupt_vector_9 )) } > VECT9 =0x3C00 - __interrupt_vector_10 : { KEEP (*(__interrupt_vector_10)) } > VECT10 =0x3C00 - __interrupt_vector_11 : { KEEP (*(__interrupt_vector_11)) } > VECT11 =0x3C00 - __interrupt_vector_12 : { KEEP (*(__interrupt_vector_12)) } > VECT12 =0x3C00 - __interrupt_vector_13 : { KEEP (*(__interrupt_vector_13)) } > VECT13 =0x3C00 - __interrupt_vector_14 : { KEEP (*(__interrupt_vector_14)) } > VECT14 =0x3C00 - __interrupt_vector_15 : { KEEP (*(__interrupt_vector_15)) } > VECT15 =0x3C00 - __interrupt_vector_16 : { KEEP (*(__interrupt_vector_16)) } > VECT16 =0x3C00 - __interrupt_vector_17 : { KEEP (*(__interrupt_vector_17)) } > VECT17 =0x3C00 - __interrupt_vector_18 : { KEEP (*(__interrupt_vector_18)) } > VECT18 =0x3C00 - __interrupt_vector_19 : { KEEP (*(__interrupt_vector_19)) } > VECT19 =0x3C00 - __interrupt_vector_20 : { KEEP (*(__interrupt_vector_20)) } > VECT20 =0x3C00 - __interrupt_vector_21 : { KEEP (*(__interrupt_vector_21)) } > VECT21 =0x3C00 - __interrupt_vector_22 : { KEEP (*(__interrupt_vector_22)) } > VECT22 =0x3C00 - __interrupt_vector_23 : { KEEP (*(__interrupt_vector_23)) } > VECT23 =0x3C00 - __interrupt_vector_24 : { KEEP (*(__interrupt_vector_24)) } > VECT24 =0x3C00 - __interrupt_vector_25 : { KEEP (*(__interrupt_vector_25)) } > VECT25 =0x3C00 - __interrupt_vector_26 : { KEEP (*(__interrupt_vector_26)) } > VECT26 =0x3C00 - __interrupt_vector_27 : { KEEP (*(__interrupt_vector_27)) } > VECT27 =0x3C00 - __interrupt_vector_28 : { KEEP (*(__interrupt_vector_28)) } > VECT28 =0x3C00 - __interrupt_vector_29 : { KEEP (*(__interrupt_vector_29)) } > VECT29 =0x3C00 - __interrupt_vector_30 : { KEEP (*(__interrupt_vector_30)) } > VECT30 =0x3C00 - __interrupt_vector_31 : { KEEP (*(__interrupt_vector_31)) KEEP (*(__interrupt_vector_aes256)) } > VECT31 =0x3C00 - __interrupt_vector_32 : { KEEP (*(__interrupt_vector_32)) KEEP (*(__interrupt_vector_rtc)) } > VECT32 =0x3C00 - __interrupt_vector_33 : { KEEP (*(__interrupt_vector_33)) KEEP (*(__interrupt_vector_port4)) } > VECT33 =0x3C00 - __interrupt_vector_34 : { KEEP (*(__interrupt_vector_34)) KEEP (*(__interrupt_vector_port3)) } > VECT34 =0x3C00 - __interrupt_vector_35 : { KEEP (*(__interrupt_vector_35)) KEEP (*(__interrupt_vector_timer3_a1)) } > VECT35 =0x3C00 - __interrupt_vector_36 : { KEEP (*(__interrupt_vector_36)) KEEP (*(__interrupt_vector_timer3_a0)) } > VECT36 =0x3C00 - __interrupt_vector_37 : { KEEP (*(__interrupt_vector_37)) KEEP (*(__interrupt_vector_port2)) } > VECT37 =0x3C00 - __interrupt_vector_38 : { KEEP (*(__interrupt_vector_38)) KEEP (*(__interrupt_vector_timer2_a1)) } > VECT38 =0x3C00 - __interrupt_vector_39 : { KEEP (*(__interrupt_vector_39)) KEEP (*(__interrupt_vector_timer2_a0)) } > VECT39 =0x3C00 - __interrupt_vector_40 : { KEEP (*(__interrupt_vector_40)) KEEP (*(__interrupt_vector_port1)) } > VECT40 =0x3C00 - __interrupt_vector_41 : { KEEP (*(__interrupt_vector_41)) KEEP (*(__interrupt_vector_timer1_a1)) } > VECT41 =0x3C00 - __interrupt_vector_42 : { KEEP (*(__interrupt_vector_42)) KEEP (*(__interrupt_vector_timer1_a0)) } > VECT42 =0x3C00 - __interrupt_vector_43 : { KEEP (*(__interrupt_vector_43)) KEEP (*(__interrupt_vector_dma)) } > VECT43 =0x3C00 - __interrupt_vector_44 : { KEEP (*(__interrupt_vector_44)) KEEP (*(__interrupt_vector_usci_a1)) } > VECT44 =0x3C00 - __interrupt_vector_45 : { KEEP (*(__interrupt_vector_45)) KEEP (*(__interrupt_vector_timer0_a1)) } > VECT45 =0x3C00 - __interrupt_vector_46 : { KEEP (*(__interrupt_vector_46)) KEEP (*(__interrupt_vector_timer0_a0)) } > VECT46 =0x3C00 - __interrupt_vector_47 : { KEEP (*(__interrupt_vector_47)) KEEP (*(__interrupt_vector_adc12)) } > VECT47 =0x3C00 - __interrupt_vector_48 : { KEEP (*(__interrupt_vector_48)) KEEP (*(__interrupt_vector_usci_b0)) } > VECT48 =0x3C00 - __interrupt_vector_49 : { KEEP (*(__interrupt_vector_49)) KEEP (*(__interrupt_vector_usci_a0)) } > VECT49 =0x3C00 - __interrupt_vector_50 : { KEEP (*(__interrupt_vector_50)) KEEP (*(__interrupt_vector_wdt)) } > VECT50 =0x3C00 - __interrupt_vector_51 : { KEEP (*(__interrupt_vector_51)) KEEP (*(__interrupt_vector_timer0_b1)) } > VECT51 =0x3C00 - __interrupt_vector_52 : { KEEP (*(__interrupt_vector_52)) KEEP (*(__interrupt_vector_timer0_b0)) } > VECT52 =0x3C00 - __interrupt_vector_53 : { KEEP (*(__interrupt_vector_53)) KEEP (*(__interrupt_vector_comp_e)) } > VECT53 =0x3C00 - __interrupt_vector_54 : { KEEP (*(__interrupt_vector_54)) KEEP (*(__interrupt_vector_unmi)) } > VECT54 =0x3C00 - __interrupt_vector_55 : { KEEP (*(__interrupt_vector_55)) KEEP (*(__interrupt_vector_sysnmi)) } > VECT55 =0x3C00 - __reset_vector : - { - KEEP (*(__interrupt_vector_56)) - KEEP (*(__interrupt_vector_reset)) - KEEP (*(.resetvec)) - } > RESETVEC - - .stack : - { - __main_thread_stack_base__ = .; - *(.stack) - . += __idle_stack_size__; - PROVIDE (__stack = .); - . = ALIGN(2); - __main_thread_stack_end__ = .; - } > FRAM :stack - - .rodata : - { - . = ALIGN(2); - *(.plt) - *(.rodata .rodata.* .gnu.linkonce.r.* .const .const:*) - *(.rodata1) - *(.lower.rodata.* .lower.rodata) - - *(.eh_frame_hdr) - KEEP (*(.eh_frame)) - KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) - PROVIDE (__preinit_array_start = .); - KEEP (*(.preinit_array)) - PROVIDE (__preinit_array_end = .); - PROVIDE (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - PROVIDE (__init_array_end = .); - PROVIDE (__fini_array_start = .); - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - PROVIDE (__fini_array_end = .); - LONG(0); /* Sentinel. */ - - /* gcc uses crtbegin.o to find the start of the constructors, so - we make sure it is first. Because this is a wildcard, it - doesn't matter if the user does not actually link against - crtbegin.o; the linker won't look for a file to match a - wildcard. The wildcard also means that it doesn't matter which - directory crtbegin.o is in. */ - KEEP (*crtbegin*.o(.ctors)) - - /* We don't want to include the .ctor section from from the - crtend.o file until after the sorted ctors. The .ctor section - from the crtend file contains the end of ctors marker and it - must be last */ - KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - - KEEP (*crtbegin*.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - } > FRAM :rodata - - .data : - { - . = ALIGN(2); - PROVIDE (__datastart = .); - - KEEP (*(.jcr)) - *(.data.rel.ro.local) *(.data.rel.ro*) - *(.dynamic) - - *(.data .data.* .gnu.linkonce.d.*) - KEEP (*(.gnu.linkonce.d.*personality*)) - SORT(CONSTRUCTORS) - *(.data1) - *(.got.plt) *(.got) - - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - . = ALIGN(2); - *(.sdata .sdata.* .gnu.linkonce.s.* D_2 D_1) - - . = ALIGN(2); - *(.lower.data.* .lower.data) - . = ALIGN(2); - - _edata = .; - PROVIDE (edata = .); - PROVIDE (__dataend = .); - } > FRAM :data - - /* Note that crt0 assumes this is a multiple of two; all the - start/stop symbols are also assumed word-aligned. */ - PROVIDE(__romdatastart = LOADADDR(.data)); - PROVIDE (__romdatacopysize = SIZEOF(.data)); - - .bss : - { - . = ALIGN(2); - PROVIDE (__bssstart = .); - *(.dynbss) - *(.sbss .sbss.*) - *(.bss .bss.* .gnu.linkonce.b.*) - *(.lower.bss.* .lower.bss) - . = ALIGN(2); - *(COMMON) - PROVIDE (__bssend = .); - } > FRAM - PROVIDE (__bsssize = SIZEOF(.bss)); - - /* This section contains data that is not initialised at startup. */ - .noinit (NOLOAD) : - { - . = ALIGN(2); - PROVIDE (__noinit_start = .); - *(.noinit) - . = ALIGN(2); - PROVIDE (__noinit_end = .); - } > FRAM /* Because I think this has to go right above .bss */ - - _end = .; - PROVIDE (end = .); - - .text : - { - PROVIDE (_start = .); - - . = ALIGN(2); - KEEP (*(SORT(.crt_*))) - - . = ALIGN(2); - KEEP (*(.lowtext)) - - . = ALIGN(2); - *(.lower.text.* .lower.text) - - . = ALIGN(2); - *(.text .stub .text.* .gnu.linkonce.t.* .text:*) - - KEEP (*(.text.*personality*)) - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - *(.interp .hash .dynsym .dynstr .gnu.version*) - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - . = ALIGN(2); - KEEP (*(.init)) - KEEP (*(.fini)) - KEEP (*(.tm_clone_table)) - } > FRAM :text - - .upper.rodata : - { - *(.upper.rodata.* .upper.rodata) - } > HIFRAM :upper_rodata - - .upper.data : - { - __upper_data_init = LOADADDR (.upper.data); - /* Status word. */ - SHORT(1); - __high_datastart = .; - *(.upper.data.* .upper.data) - __high_dataend = .; - } > HIFRAM :upper_data - - __rom_highdatacopysize = SIZEOF(.upper.data) - 2; - __rom_highdatastart = LOADADDR(.upper.data) + 2; - - .upper.bss : - { - . = ALIGN(2); - __high_bssstart = .; - *(.upper.bss.* .upper.bss) - . = ALIGN(2); - __high_bssend = .; - } > HIFRAM - - .upper.text : - { - . = ALIGN(2); - *(.upper.text.* .upper.text) - } > HIFRAM :upper_text - - .infoA : {} > INFOA /* MSP430 INFO FLASH MEMORY SEGMENTS */ - .infoB : {} > INFOB - .infoC : {} > INFOC - .infoD : {} > INFOD - - /* The rest are all not normally part of the runtime image. */ - - .MP430.attributes 0 : - { - KEEP (*(.MSP430.attributes)) - KEEP (*(.gnu.attributes)) - KEEP (*(__TI_build_attributes)) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1. */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions. */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2. */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2. */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions. */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - /* DWARF 3 */ - .debug_pubtypes 0 : { *(.debug_pubtypes) } - .debug_ranges 0 : { *(.debug_ranges) } - /* DWARF Extension. */ - .debug_macro 0 : { *(.debug_macro) } - - /DISCARD/ : { *(.note.GNU-stack) } -} - -INCLUDE msp430fr5969_symbols.ld diff --git a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr6989.ld b/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr6989.ld deleted file mode 100644 index b3cd9ce..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/ld/msp430fr6989.ld +++ /dev/null @@ -1,437 +0,0 @@ -/* This file supports MSP430FR6989 devices. */ -/* Version: 1.188 */ -/* ChibiOS linker script, for normal executables */ - -OUTPUT_ARCH(msp430) -ENTRY(_start) - -MEMORY { - TINYRAM : ORIGIN = 0x0006, LENGTH = 0x001A - BSL : ORIGIN = 0x1000, LENGTH = 0x0800 - RAM : ORIGIN = 0x1C00, LENGTH = 0x0800 /* END=0x23FF, size 2048 */ - INFOMEM : ORIGIN = 0x1800, LENGTH = 0x0200 /* END=0x19FF, size 512 as 4 128-byte segments */ - INFOA : ORIGIN = 0x1980, LENGTH = 0x0080 /* END=0x19FF, size 128 */ - INFOB : ORIGIN = 0x1900, LENGTH = 0x0080 /* END=0x197F, size 128 */ - INFOC : ORIGIN = 0x1880, LENGTH = 0x0080 /* END=0x18FF, size 128 */ - INFOD : ORIGIN = 0x1800, LENGTH = 0x0080 /* END=0x187F, size 128 */ - FRAM (rxw) : ORIGIN = 0x4400, LENGTH = 0xBB80 /* END=0xFF7F, size 48000 */ - HIFRAM (rxw) : ORIGIN = 0x00010000, LENGTH = 0x00013FFF - VECT1 : ORIGIN = 0xFF90, LENGTH = 0x0002 - VECT2 : ORIGIN = 0xFF92, LENGTH = 0x0002 - VECT3 : ORIGIN = 0xFF94, LENGTH = 0x0002 - VECT4 : ORIGIN = 0xFF96, LENGTH = 0x0002 - VECT5 : ORIGIN = 0xFF98, LENGTH = 0x0002 - VECT6 : ORIGIN = 0xFF9A, LENGTH = 0x0002 - VECT7 : ORIGIN = 0xFF9C, LENGTH = 0x0002 - VECT8 : ORIGIN = 0xFF9E, LENGTH = 0x0002 - VECT9 : ORIGIN = 0xFFA0, LENGTH = 0x0002 - VECT10 : ORIGIN = 0xFFA2, LENGTH = 0x0002 - VECT11 : ORIGIN = 0xFFA4, LENGTH = 0x0002 - VECT12 : ORIGIN = 0xFFA6, LENGTH = 0x0002 - VECT13 : ORIGIN = 0xFFA8, LENGTH = 0x0002 - VECT14 : ORIGIN = 0xFFAA, LENGTH = 0x0002 - VECT15 : ORIGIN = 0xFFAC, LENGTH = 0x0002 - VECT16 : ORIGIN = 0xFFAE, LENGTH = 0x0002 - VECT17 : ORIGIN = 0xFFB0, LENGTH = 0x0002 - VECT18 : ORIGIN = 0xFFB2, LENGTH = 0x0002 - VECT19 : ORIGIN = 0xFFB4, LENGTH = 0x0002 - VECT20 : ORIGIN = 0xFFB6, LENGTH = 0x0002 - VECT21 : ORIGIN = 0xFFB8, LENGTH = 0x0002 - VECT22 : ORIGIN = 0xFFBA, LENGTH = 0x0002 - VECT23 : ORIGIN = 0xFFBC, LENGTH = 0x0002 - VECT24 : ORIGIN = 0xFFBE, LENGTH = 0x0002 - VECT25 : ORIGIN = 0xFFC0, LENGTH = 0x0002 - VECT26 : ORIGIN = 0xFFC2, LENGTH = 0x0002 - VECT27 : ORIGIN = 0xFFC4, LENGTH = 0x0002 - VECT28 : ORIGIN = 0xFFC6, LENGTH = 0x0002 - VECT29 : ORIGIN = 0xFFC8, LENGTH = 0x0002 - VECT30 : ORIGIN = 0xFFCA, LENGTH = 0x0002 - VECT31 : ORIGIN = 0xFFCC, LENGTH = 0x0002 - VECT32 : ORIGIN = 0xFFCE, LENGTH = 0x0002 - VECT33 : ORIGIN = 0xFFD0, LENGTH = 0x0002 - VECT34 : ORIGIN = 0xFFD2, LENGTH = 0x0002 - VECT35 : ORIGIN = 0xFFD4, LENGTH = 0x0002 - VECT36 : ORIGIN = 0xFFD6, LENGTH = 0x0002 - VECT37 : ORIGIN = 0xFFD8, LENGTH = 0x0002 - VECT38 : ORIGIN = 0xFFDA, LENGTH = 0x0002 - VECT39 : ORIGIN = 0xFFDC, LENGTH = 0x0002 - VECT40 : ORIGIN = 0xFFDE, LENGTH = 0x0002 - VECT41 : ORIGIN = 0xFFE0, LENGTH = 0x0002 - VECT42 : ORIGIN = 0xFFE2, LENGTH = 0x0002 - VECT43 : ORIGIN = 0xFFE4, LENGTH = 0x0002 - VECT44 : ORIGIN = 0xFFE6, LENGTH = 0x0002 - VECT45 : ORIGIN = 0xFFE8, LENGTH = 0x0002 - VECT46 : ORIGIN = 0xFFEA, LENGTH = 0x0002 - VECT47 : ORIGIN = 0xFFEC, LENGTH = 0x0002 - VECT48 : ORIGIN = 0xFFEE, LENGTH = 0x0002 - VECT49 : ORIGIN = 0xFFF0, LENGTH = 0x0002 - VECT50 : ORIGIN = 0xFFF2, LENGTH = 0x0002 - VECT51 : ORIGIN = 0xFFF4, LENGTH = 0x0002 - VECT52 : ORIGIN = 0xFFF6, LENGTH = 0x0002 - VECT53 : ORIGIN = 0xFFF8, LENGTH = 0x0002 - VECT54 : ORIGIN = 0xFFFA, LENGTH = 0x0002 - VECT55 : ORIGIN = 0xFFFC, LENGTH = 0x0002 - RESETVEC : ORIGIN = 0xFFFE, LENGTH = 0x0002 -} - -PHDRS { - vectors PT_LOAD ; - stack PT_LOAD ; - rodata PT_LOAD ; - data PT_LOAD ; - text PT_LOAD ; - upper_rodata PT_LOAD ; - upper_data PT_LOAD ; - upper_text PT_LOAD ; -} - -SECTIONS -{ - __interrupt_vector_1 : { KEEP (*(__interrupt_vector_1 )) } > VECT1 :vectors - __interrupt_vector_2 : { KEEP (*(__interrupt_vector_2 )) } > VECT2 - __interrupt_vector_3 : { KEEP (*(__interrupt_vector_3 )) } > VECT3 - __interrupt_vector_4 : { KEEP (*(__interrupt_vector_4 )) } > VECT4 - __interrupt_vector_5 : { KEEP (*(__interrupt_vector_5 )) } > VECT5 - __interrupt_vector_6 : { KEEP (*(__interrupt_vector_6 )) } > VECT6 - __interrupt_vector_7 : { KEEP (*(__interrupt_vector_7 )) } > VECT7 - __interrupt_vector_8 : { KEEP (*(__interrupt_vector_8 )) } > VECT8 - __interrupt_vector_9 : { KEEP (*(__interrupt_vector_9 )) } > VECT9 - __interrupt_vector_10 : { KEEP (*(__interrupt_vector_10)) } > VECT10 - __interrupt_vector_11 : { KEEP (*(__interrupt_vector_11)) } > VECT11 - __interrupt_vector_12 : { KEEP (*(__interrupt_vector_12)) } > VECT12 - __interrupt_vector_13 : { KEEP (*(__interrupt_vector_13)) } > VECT13 - __interrupt_vector_14 : { KEEP (*(__interrupt_vector_14)) } > VECT14 - __interrupt_vector_15 : { KEEP (*(__interrupt_vector_15)) } > VECT15 - __interrupt_vector_16 : { KEEP (*(__interrupt_vector_16)) } > VECT16 - __interrupt_vector_17 : { KEEP (*(__interrupt_vector_17)) } > VECT17 - __interrupt_vector_18 : { KEEP (*(__interrupt_vector_18)) } > VECT18 - __interrupt_vector_19 : { KEEP (*(__interrupt_vector_19)) } > VECT19 - __interrupt_vector_20 : { KEEP (*(__interrupt_vector_20)) } > VECT20 - __interrupt_vector_21 : { KEEP (*(__interrupt_vector_21)) } > VECT21 - __interrupt_vector_22 : { KEEP (*(__interrupt_vector_22)) } > VECT22 - __interrupt_vector_23 : { KEEP (*(__interrupt_vector_23)) } > VECT23 - __interrupt_vector_24 : { KEEP (*(__interrupt_vector_24)) } > VECT24 - __interrupt_vector_25 : { KEEP (*(__interrupt_vector_25)) } > VECT25 - __interrupt_vector_26 : { KEEP (*(__interrupt_vector_26)) } > VECT26 - __interrupt_vector_27 : { KEEP (*(__interrupt_vector_27)) } > VECT27 - __interrupt_vector_28 : { KEEP (*(__interrupt_vector_28)) KEEP (*(__interrupt_vector_aes256)) } > VECT28 - __interrupt_vector_29 : { KEEP (*(__interrupt_vector_29)) KEEP (*(__interrupt_vector_rtc)) } > VECT29 - __interrupt_vector_30 : { KEEP (*(__interrupt_vector_30)) KEEP (*(__interrupt_vector_lcd_c)) } > VECT30 - __interrupt_vector_31 : { KEEP (*(__interrupt_vector_31)) KEEP (*(__interrupt_vector_port4)) } > VECT31 - __interrupt_vector_32 : { KEEP (*(__interrupt_vector_32)) KEEP (*(__interrupt_vector_port3)) } > VECT32 - __interrupt_vector_33 : { KEEP (*(__interrupt_vector_33)) KEEP (*(__interrupt_vector_timer3_a1)) } > VECT33 - __interrupt_vector_34 : { KEEP (*(__interrupt_vector_34)) KEEP (*(__interrupt_vector_timer3_a0)) } > VECT34 - __interrupt_vector_35 : { KEEP (*(__interrupt_vector_35)) KEEP (*(__interrupt_vector_port2)) } > VECT35 - __interrupt_vector_36 : { KEEP (*(__interrupt_vector_36)) KEEP (*(__interrupt_vector_timer2_a1)) } > VECT36 - __interrupt_vector_37 : { KEEP (*(__interrupt_vector_37)) KEEP (*(__interrupt_vector_timer2_a0)) } > VECT37 - __interrupt_vector_38 : { KEEP (*(__interrupt_vector_38)) KEEP (*(__interrupt_vector_port1)) } > VECT38 - __interrupt_vector_39 : { KEEP (*(__interrupt_vector_39)) KEEP (*(__interrupt_vector_timer1_a1)) } > VECT39 - __interrupt_vector_40 : { KEEP (*(__interrupt_vector_40)) KEEP (*(__interrupt_vector_timer1_a0)) } > VECT40 - __interrupt_vector_41 : { KEEP (*(__interrupt_vector_41)) KEEP (*(__interrupt_vector_dma)) } > VECT41 - __interrupt_vector_42 : { KEEP (*(__interrupt_vector_42)) KEEP (*(__interrupt_vector_usci_b1)) } > VECT42 - __interrupt_vector_43 : { KEEP (*(__interrupt_vector_43)) KEEP (*(__interrupt_vector_usci_a1)) } > VECT43 - __interrupt_vector_44 : { KEEP (*(__interrupt_vector_44)) KEEP (*(__interrupt_vector_timer0_a1)) } > VECT44 - __interrupt_vector_45 : { KEEP (*(__interrupt_vector_45)) KEEP (*(__interrupt_vector_timer0_a0)) } > VECT45 - __interrupt_vector_46 : { KEEP (*(__interrupt_vector_46)) KEEP (*(__interrupt_vector_adc12)) } > VECT46 - __interrupt_vector_47 : { KEEP (*(__interrupt_vector_47)) KEEP (*(__interrupt_vector_usci_b0)) } > VECT47 - __interrupt_vector_48 : { KEEP (*(__interrupt_vector_48)) KEEP (*(__interrupt_vector_usci_a0)) } > VECT48 - __interrupt_vector_49 : { KEEP (*(__interrupt_vector_49)) KEEP (*(__interrupt_vector_escan_if)) } > VECT49 - __interrupt_vector_50 : { KEEP (*(__interrupt_vector_50)) KEEP (*(__interrupt_vector_wdt)) } > VECT50 - __interrupt_vector_51 : { KEEP (*(__interrupt_vector_51)) KEEP (*(__interrupt_vector_timer0_b1)) } > VECT51 - __interrupt_vector_52 : { KEEP (*(__interrupt_vector_52)) KEEP (*(__interrupt_vector_timer0_b0)) } > VECT52 - __interrupt_vector_53 : { KEEP (*(__interrupt_vector_53)) KEEP (*(__interrupt_vector_comp_e)) } > VECT53 - __interrupt_vector_54 : { KEEP (*(__interrupt_vector_54)) KEEP (*(__interrupt_vector_unmi)) } > VECT54 - __interrupt_vector_55 : { KEEP (*(__interrupt_vector_55)) KEEP (*(__interrupt_vector_sysnmi)) } > VECT55 - __reset_vector : - { - KEEP (*(__interrupt_vector_56)) - KEEP (*(__interrupt_vector_reset)) - KEEP (*(.resetvec)) - } > RESETVEC - - .stack : - { - __main_thread_stack_base__ = .; - *(.stack) - . += __idle_stack_size__; - PROVIDE (__stack = .); - . = ALIGN(2); - __main_thread_stack_end__ = .; - } > FRAM :stack - - .rodata : - { - . = ALIGN(2); - *(.plt) - *(.rodata .rodata.* .gnu.linkonce.r.* .const .const:*) - *(.rodata1) - *(.lower.rodata.* .lower.rodata) - KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) - PROVIDE (__preinit_array_start = .); - KEEP (*(.preinit_array)) - PROVIDE (__preinit_array_end = .); - PROVIDE (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - PROVIDE (__init_array_end = .); - PROVIDE (__fini_array_start = .); - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - PROVIDE (__fini_array_end = .); - } > FRAM :rodata - - /* Note: This is a separate .rodata section for sections which are - read only but which older linkers treat as read-write. - This prevents older linkers from marking the entire .rodata - section as read-write. */ - .rodata2 : - { - . = ALIGN(2); - *(.eh_frame_hdr) - KEEP (*(.eh_frame)) - - /* gcc uses crtbegin.o to find the start of the constructors, so - we make sure it is first. Because this is a wildcard, it - doesn't matter if the user does not actually link against - crtbegin.o; the linker won't look for a file to match a - wildcard. The wildcard also means that it doesn't matter which - directory crtbegin.o is in. */ - KEEP (*crtbegin*.o(.ctors)) - - /* We don't want to include the .ctor section from from the - crtend.o file until after the sorted ctors. The .ctor section - from the crtend file contains the end of ctors marker and it - must be last */ - KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - - KEEP (*crtbegin*.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - } > FRAM - - .data : - { - . = ALIGN(2); - PROVIDE (__datastart = .); - - KEEP (*(.jcr)) - *(.data.rel.ro.local) *(.data.rel.ro*) - *(.dynamic) - - *(.data .data.* .gnu.linkonce.d.*) - KEEP (*(.gnu.linkonce.d.*personality*)) - SORT(CONSTRUCTORS) - *(.data1) - *(.got.plt) *(.got) - - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - . = ALIGN(2); - *(.sdata .sdata.* .gnu.linkonce.s.* D_2 D_1) - - . = ALIGN(2); - *(.lower.data.* .lower.data) - . = ALIGN(2); - - _edata = .; - PROVIDE (edata = .); - PROVIDE (__dataend = .); - } > FRAM :data - - /* Note that crt0 assumes this is a multiple of two; all the - start/stop symbols are also assumed word-aligned. */ - PROVIDE(__romdatastart = LOADADDR(.data)); - PROVIDE (__romdatacopysize = SIZEOF(.data)); - - .bss : - { - . = ALIGN(2); - PROVIDE (__bssstart = .); - *(.dynbss) - *(.sbss .sbss.*) - *(.bss .bss.* .gnu.linkonce.b.*) - *(.lower.bss.* .lower.bss) - . = ALIGN(2); - *(COMMON) - PROVIDE (__bssend = .); - } > FRAM - PROVIDE (__bsssize = SIZEOF(.bss)); - - /* This section contains data that is not initialised during load - or application reset. */ - .noinit (NOLOAD) : - { - . = ALIGN(2); - PROVIDE (__noinit_start = .); - *(.noinit) - . = ALIGN(2); - PROVIDE (__noinit_end = .); - } > FRAM :text - - _end = .; - PROVIDE (end = .); - - .text : - { - PROVIDE (_start = .); - - . = ALIGN(2); - KEEP (*(SORT(.crt_*))) - - . = ALIGN(2); - KEEP (*(.lowtext)) - - . = ALIGN(2); - *(.lower.text.* .lower.text) - - . = ALIGN(2); - *(.text .stub .text.* .gnu.linkonce.t.* .text:*) - - KEEP (*(.text.*personality*)) - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - *(.interp .hash .dynsym .dynstr .gnu.version*) - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - . = ALIGN(2); - KEEP (*(.init)) - KEEP (*(.fini)) - KEEP (*(.tm_clone_table)) - } > FRAM - - .upper.rodata : - { - *(.upper.rodata.* .upper.rodata) - } > HIFRAM :upper_rodata - - /* This section contains data that is initialised during load - but not on application reset. */ - .persistent : - { - . = ALIGN(2); - PROVIDE (__persistent_start = .); - *(.persistent) - . = ALIGN(2); - PROVIDE (__persistent_end = .); - } > HIFRAM :upper_data - - .upper.data : - { - __upper_data_init = LOADADDR (.upper.data); - /* Status word. */ - SHORT(1); - __high_datastart = .; - *(.upper.data.* .upper.data) - __high_dataend = .; - } > HIFRAM - - __rom_highdatacopysize = SIZEOF(.upper.data) - 2; - __rom_highdatastart = LOADADDR(.upper.data) + 2; - - .upper.bss : - { - . = ALIGN(2); - __high_bssstart = .; - *(.upper.bss.* .upper.bss) - . = ALIGN(2); - __high_bssend = .; - __high_bsssize = SIZEOF(.upper.bss); - } > HIFRAM - - .upper.text : - { - . = ALIGN(2); - *(.upper.text.* .upper.text) - } > HIFRAM :upper_text - - /* We create this section so that "end" will always be in the - RAM region (matching .stack below), even if the .bss - section is empty. */ - .heap (NOLOAD) : - { - . = ALIGN(2); - __heap_start__ = .; - _end = __heap_start__; - PROVIDE (end = .); - KEEP (*(.heap)) - _end = .; - PROVIDE (end = .); - /* This word is here so that the section is not empty, and thus - not discarded by the linker. The actual value does not matter - and is ignored. */ - LONG(0); - __heap_end__ = .; - __HeapLimit = __heap_end__; - } > RAM - /* WARNING: Do not place anything in RAM here. - The heap section must be the last section in RAM and the stack - section must be placed at the very end of the RAM region. */ - - .infoA : {} > INFOA /* MSP430 INFO FLASH MEMORY SEGMENTS */ - .infoB : {} > INFOB - .infoC : {} > INFOC - .infoD : {} > INFOD - - /* The rest are all not normally part of the runtime image. */ - - .MP430.attributes 0 : - { - KEEP (*(.MSP430.attributes)) - KEEP (*(.gnu.attributes)) - KEEP (*(__TI_build_attributes)) - } - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1. */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions. */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2. */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2. */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line .debug_line.* .debug_line_end ) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions. */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - /* DWARF 3 */ - .debug_pubtypes 0 : { *(.debug_pubtypes) } - .debug_ranges 0 : { *(.debug_ranges) } - /* DWARF Extension. */ - .debug_macro 0 : { *(.debug_macro) } - - /DISCARD/ : { *(.note.GNU-stack) } -} - - -/****************************************************************************/ -/* Include peripherals memory map */ -/****************************************************************************/ - -INCLUDE msp430fr6989_symbols.ld - diff --git a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk b/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk deleted file mode 100644 index 9c063cd..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk +++ /dev/null @@ -1,10 +0,0 @@ -# List of the ChibiOS generic MSP430X startup and linker files. -STARTUPSRC = -#$(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/vectors.c - -STARTUPASM = - -STARTUPINC = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC - -STARTUPLD = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/ld - diff --git a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/rules.mk b/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/rules.mk deleted file mode 100644 index a431b96..0000000 --- a/ChibiOS_16.1.5/community/os/common/startup/MSP430X/compilers/GCC/rules.mk +++ /dev/null @@ -1,269 +0,0 @@ -# ARM Cortex-Mx common makefile scripts and rules. - -############################################################################## -# Processing options coming from the upper Makefile. -# - -# Compiler options -OPT = $(USE_OPT) -COPT = $(USE_COPT) -CPPOPT = $(USE_CPPOPT) - -# Garbage collection -ifeq ($(USE_LINK_GC),yes) - OPT += -ffunction-sections -fdata-sections -fno-common - LDOPT := ,--gc-sections -else - LDOPT := -endif - -# Linker extra options -ifneq ($(USE_LDOPT),) - LDOPT := $(LDOPT),$(USE_LDOPT) -endif - -# Link time optimizations -ifeq ($(USE_LTO),yes) - OPT += -flto -endif - -# HWMULT-related options -ifeq ($(USE_HWMULT),) - USE_HWMULT = none -endif -ifneq ($(USE_HWMULT),none) - OPT += -mhwmult=$(USE_HWMULT) -endif - -# Idle thread stack size -ifeq ($(USE_IDLE_STACKSIZE),) - LDOPT := $(LDOPT),--defsym=__idle_stack_size__=0x40 -else - LDOPT := $(LDOPT),--defsym=__idle_stack_size__=$(USE_IDLE_STACKSIZE) -endif - -# Output directory and files -ifeq ($(BUILDDIR),) - BUILDDIR = build -endif -ifeq ($(BUILDDIR),.) - BUILDDIR = build -endif -OUTFILES = $(BUILDDIR)/$(PROJECT).elf \ - $(BUILDDIR)/$(PROJECT).hex \ - $(BUILDDIR)/$(PROJECT).bin \ - $(BUILDDIR)/$(PROJECT).dmp \ - $(BUILDDIR)/$(PROJECT).list - -ifdef SREC - OUTFILES += $(BUILDDIR)/$(PROJECT).srec -endif - -# Source files groups and paths -ACSRC = $(CSRC) -ACPPSRC = $(CPPSRC) -ASRC = $(CSRC)$(CPPSRC) -SRCPATHS = $(sort $(dir $(ASMXSRC)) $(dir $(ASMSRC)) $(dir $(ASRC)) $(dir $(TSRC))) - -# Various directories -OBJDIR = $(BUILDDIR)/obj -LSTDIR = $(BUILDDIR)/lst - -# Object files groups -ACOBJS = $(addprefix $(OBJDIR)/, $(notdir $(ACSRC:.c=.o))) -ACPPOBJS = $(addprefix $(OBJDIR)/, $(notdir $(ACPPSRC:.cpp=.o))) -ASMOBJS = $(addprefix $(OBJDIR)/, $(notdir $(ASMSRC:.s=.o))) -ASMXOBJS = $(addprefix $(OBJDIR)/, $(notdir $(ASMXSRC:.S=.o))) -OBJS = $(ASMXOBJS) $(ASMOBJS) $(ACOBJS) $(TCOBJS) $(ACPPOBJS) $(TCPPOBJS) - -# Paths -IINCDIR = $(patsubst %,-I%,$(INCDIR) $(DINCDIR) $(UINCDIR)) -LLIBDIR = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR)) - -# Macros -DEFS = $(DDEFS) $(UDEFS) -ADEFS = $(DADEFS) $(UADEFS) - -# Libs -LIBS = $(DLIBS) $(ULIBS) - -# Various settings -MCFLAGS = -mmcu=$(MCU) $(MOPT) -ODFLAGS = -x --syms -ASFLAGS = $(MCFLAGS) -Wa,-amhls=$(LSTDIR)/$(notdir $(<:.s=.lst)) $(ADEFS) -ASXFLAGS = $(MCFLAGS) -Wa,-amhls=$(LSTDIR)/$(notdir $(<:.S=.lst)) $(ADEFS) -CFLAGS = $(MCFLAGS) $(OPT) $(COPT) $(CWARN) -Wa,-alms=$(LSTDIR)/$(notdir $(<:.c=.lst)) $(DEFS) -CPPFLAGS = $(MCFLAGS) $(OPT) $(CPPOPT) $(CPPWARN) -Wa,-alms=$(LSTDIR)/$(notdir $(<:.cpp=.lst)) $(DEFS) -LDFLAGS = $(MCFLAGS) $(OPT) -minrt $(LLIBDIR) -Wl,-Map=$(BUILDDIR)/$(PROJECT).map,--cref,--no-warn-mismatch,--library-path=$(RULESPATH)/ld,--script=$(LDSCRIPT)$(LDOPT) - -# Temporary specfile to deal with messed-up msp430-elf default spec file -SPECFILE := $(shell mktemp -u) - -# Generate dependency information -ASFLAGS += -MD -MP -MF .dep/$(@F).d -CFLAGS += -MD -MP -MF .dep/$(@F).d -CPPFLAGS += -MD -MP -MF .dep/$(@F).d - -# Paths where to search for sources -VPATH = $(SRCPATHS) - -# -# Makefile rules -# - -all: PRE_MAKE_ALL_RULE_HOOK $(OBJS) $(OUTFILES) POST_MAKE_ALL_RULE_HOOK - -PRE_MAKE_ALL_RULE_HOOK: - -POST_MAKE_ALL_RULE_HOOK: - -$(OBJS): | $(BUILDDIR) $(OBJDIR) $(LSTDIR) - -$(BUILDDIR): -ifneq ($(USE_VERBOSE_COMPILE),yes) - @echo Compiler Options - @echo $(CC) -c $(CFLAGS) -I. $(IINCDIR) main.c -o main.o - @echo -endif - @mkdir -p $(BUILDDIR) - -$(OBJDIR): - @mkdir -p $(OBJDIR) - -$(LSTDIR): - @mkdir -p $(LSTDIR) - -$(ACPPOBJS) : $(OBJDIR)/%.o : %.cpp Makefile -ifeq ($(USE_VERBOSE_COMPILE),yes) - @echo - $(CPPC) -c $(CPPFLAGS) $(AOPT) -I. $(IINCDIR) $< -o $@ -else - @echo Compiling $( $(SPECFILE) - sed -i 's/%{!T.*}//' $(SPECFILE) - -$(BUILDDIR)/$(PROJECT).elf: $(OBJS) $(LDSCRIPT) $(SPECFILE) -ifeq ($(USE_VERBOSE_COMPILE),yes) - @echo - $(LD) $(LDFLAGS) -specs=$(SPECFILE) $(OBJS) $(LIBS) -o $@ -else - @echo Linking $@ - @$(LD) $(LDFLAGS) -specs=$(SPECFILE) $(OBJS) $(LIBS) -o $@ -endif - -%.hex: %.elf -ifeq ($(USE_VERBOSE_COMPILE),yes) - $(HEX) $< $@ -else - @echo Creating $@ - @$(HEX) $< $@ -endif - -%.bin: %.elf -ifeq ($(USE_VERBOSE_COMPILE),yes) - $(BIN) $< $@ -else - @echo Creating $@ - @$(BIN) $< $@ -endif - -%.srec: %.elf -ifdef SREC - ifeq ($(USE_VERBOSE_COMPILE),yes) - $(SREC) $< $@ - else - @echo Creating $@ - @$(SREC) $< $@ - endif -endif - -%.dmp: %.elf -ifeq ($(USE_VERBOSE_COMPILE),yes) - $(OD) $(ODFLAGS) $< > $@ - $(SZ) $< -else - @echo Creating $@ - @$(OD) $(ODFLAGS) $< > $@ - @echo - @$(SZ) $< -endif - -%.list: %.elf -ifeq ($(USE_VERBOSE_COMPILE),yes) - $(OD) -S $< > $@ -else - @echo Creating $@ - @$(OD) -S $< > $@ - @echo - @echo Done -endif - -lib: $(OBJS) $(BUILDDIR)/lib$(PROJECT).a - -$(BUILDDIR)/lib$(PROJECT).a: $(OBJS) - @$(AR) -r $@ $^ - @echo - @echo Done - -clean: - @echo Cleaning - -rm -fR .dep $(BUILDDIR) - @echo - @echo Done - -# -# Include the dependency files, should be the last of the makefile -# --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - -# *** EOF *** diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c deleted file mode 100644 index ac48ba0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_IOPORT1_OUT, VAL_IOPORT1_DIR, VAL_IOPORT1_REN, VAL_IOPORT1_SEL0, - VAL_IOPORT1_SEL1, VAL_IOPORT1_IES, VAL_IOPORT1_IE}, - {VAL_IOPORT2_OUT, VAL_IOPORT2_DIR, VAL_IOPORT2_REN, VAL_IOPORT2_SEL0, - VAL_IOPORT2_SEL1, VAL_IOPORT2_IES, VAL_IOPORT2_IE}, - {VAL_IOPORT0_OUT, VAL_IOPORT0_DIR, VAL_IOPORT0_REN, VAL_IOPORT0_SEL0, - VAL_IOPORT0_SEL1, VAL_IOPORT0_IES, VAL_IOPORT0_IE} -}; /* Set UART TX pin correctly */ -#endif /* HAL_USE_PAL */ - -/** - * Board-specific initialization code. - */ -void boardInit(void) { - - /* - * External interrupts setup, all disabled initially. - */ - _disable_interrupts(); - -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h deleted file mode 100644 index 97103d3..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the EXP430FR5969 LaunchPad board - */ - -/* - * Board identifier. - */ -#define BOARD_EXP430FR5959 -#define BOARD_NAME "MSP430FR5969 LaunchPad" - -/* - * IO lines assignments. - */ -#define LINE_LED_G PAL_LINE(IOPORT1, 0U) -#define LINE_LED_R PAL_LINE(IOPORT2, 14U) -#define LINE_SW_S1 PAL_LINE(IOPORT2, 13U) -#define LINE_SW_S2 PAL_LINE(IOPORT1, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the MSP430X Family Users Guide for details. - */ -/* - * Port A setup: - * - * P1.0 - Green LED (output low) - * P1.1 - Switch S2 (input pullup) - * P1.2 - BoosterPack BP19 (input pullup) - * P1.3 - BoosterPack BP11 (input pullup) - * P1.4 - BoosterPack BP12 (input pullup) - * P1.5 - BoosterPack BP13 (input pullup) - * P1.6 - BoosterPack BP15 (input pullup) - * P1.7 - BoosterPack BP14 (input pullup) - * P2.0 - Application UART TX (alternate 2) - * P2.1 - Application UART RX (alternate 2) - * P2.2 - BoosterPack BP7 (input pullup) - * P2.3 - N/C (input pullup) - * P2.4 - BoosterPack BP6 (input pullup) - * P2.5 - BoosterPack BP4 (input pullup) - * P2.6 - BoosterPack BP3 (input pullup) - * P2.7 - N/C (input pullup) - */ -#define VAL_IOPORT1_OUT 0xFCFE -#define VAL_IOPORT1_DIR 0x0001 -#define VAL_IOPORT1_REN 0xFCFE -#define VAL_IOPORT1_SEL0 0x0000 -#define VAL_IOPORT1_SEL1 0x0300 -#define VAL_IOPORT1_IES 0x0000 -#define VAL_IOPORT1_IE 0x0000 - -/* - * Port B setup: - * - * P3.0 - BoosterPack BP18 (input pullup) - * P3.1 - N/C (input pullup) - * P3.2 - N/C (input pullup) - * P3.3 - N/C (input pullup) - * P3.4 - BoosterPack BP8 (input pullup) - * P3.5 - BoosterPack BP9 (input pullup) - * P3.6 - BoosterPack BP10 (input pullup) - * P3.7 - N/C (input pullup) - * P4.0 - Application UART CTS (input pullup) - * P4.1 - Application UART RTS (output high) - * P4.2 - BoosterPack BP2 (input pullup) - * P4.3 - BoosterPack BP5 (input pullup) - * P4.4 - N/C (input pullup) - * P4.5 - Switch S1 (input pullup) - * P4.6 - Red LED (output low) - * P4.7 - N/C (input pullup) - */ -#define VAL_IOPORT2_OUT 0xBFFF -#define VAL_IOPORT2_DIR 0x4200 -#define VAL_IOPORT2_REN 0xBDFF -#define VAL_IOPORT2_SEL0 0x0000 -#define VAL_IOPORT2_SEL1 0x0000 -#define VAL_IOPORT2_IES 0x0000 -#define VAL_IOPORT2_IE 0x0000 - -/* - * Port J setup: - * - * PJ.0 - TDO (input pullup) - * PJ.1 - TDI (input pullup) - * PJ.2 - TMS (input pullup) - * PJ.3 - TCK (input pullup) - * PJ.4 - LFXIN (alternate 1) - * PJ.5 - LFXOUT (alternate 1) - * PJ.6 - HFXIN (N/C) (input pullup) - * PJ.7 - HFXOUT (N/C) (input pullup) - */ -#define VAL_IOPORT0_OUT 0x00FF -#define VAL_IOPORT0_DIR 0x0000 -#define VAL_IOPORT0_REN 0x00CF -#define VAL_IOPORT0_SEL0 0x0030 -#define VAL_IOPORT0_SEL1 0x0000 -#define VAL_IOPORT0_IES 0x0000 -#define VAL_IOPORT0_IE 0x0000 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk deleted file mode 100644 index c629257..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR5969/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR5969 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c deleted file mode 100644 index a6836cf..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_IOPORT1_OUT, VAL_IOPORT1_DIR, VAL_IOPORT1_REN, VAL_IOPORT1_SEL0, - VAL_IOPORT1_SEL1, VAL_IOPORT1_IES, VAL_IOPORT1_IE}, - {VAL_IOPORT2_OUT, VAL_IOPORT2_DIR, VAL_IOPORT2_REN, VAL_IOPORT2_SEL0, - VAL_IOPORT2_SEL1, VAL_IOPORT2_IES, VAL_IOPORT2_IE}, - {VAL_IOPORT3_OUT, VAL_IOPORT3_DIR, VAL_IOPORT3_REN, VAL_IOPORT3_SEL0, - VAL_IOPORT3_SEL1, VAL_IOPORT3_IES, VAL_IOPORT3_IE}, - {VAL_IOPORT4_OUT, VAL_IOPORT4_DIR, VAL_IOPORT4_REN, VAL_IOPORT4_SEL0, - VAL_IOPORT4_SEL1, VAL_IOPORT4_IES, VAL_IOPORT4_IE}, - {VAL_IOPORT5_OUT, VAL_IOPORT5_DIR, VAL_IOPORT5_REN, VAL_IOPORT5_SEL0, - VAL_IOPORT5_SEL1, VAL_IOPORT5_IES, VAL_IOPORT5_IE}, - {VAL_IOPORT0_OUT, VAL_IOPORT0_DIR, VAL_IOPORT0_REN, VAL_IOPORT0_SEL0, - VAL_IOPORT0_SEL1, VAL_IOPORT0_IES, VAL_IOPORT0_IE} -}; /* Set UART TX pin correctly */ -#endif /* HAL_USE_PAL */ - -/** - * Board-specific initialization code. - */ -void boardInit(void) { - - /* - * External interrupts setup, all disabled initially. - */ - _disable_interrupts(); - -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h deleted file mode 100644 index 83b8fbb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the EXP430FR6989 LaunchPad board - */ - -/* NOTE: LCD segment pins configured as unused - controlled by LCD driver if - * present - */ - -/* - * Board identifier. - */ -#define BOARD_EXP430FR6989 -#define BOARD_NAME "MSP430FR6989 LaunchPad" - -/* - * IO lines assignments. - */ -#define LINE_LED_R PAL_LINE(IOPORT1, 0U) -#define LINE_LED_G PAL_LINE(IOPORT5, 7U) -#define LINE_SW_S1 PAL_LINE(IOPORT1, 1U) -#define LINE_SW_S2 PAL_LINE(IOPORT1, 2U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the MSP430X Family Users Guide for details. - */ -/* - * Port A setup: - * - * P1.0 - Red LED (output low) - * P1.1 - Switch S1 (input pullup falling-edge interrupt) - * P1.2 - Switch S2 (input pullup falling-edge interrupt) - * P1.3 - BoosterPack BP34 (input pullup) - * P1.4 - BoosterPack BP7 (input pullup) - * P1.5 - BoosterPack BP18 (input pullup) - * P1.6 - BoosterPack BP15 (input pullup) - * P1.7 - BoosterPack BP14 (input pullup) - * P2.0 - BoosterPack BP8 (input pullup) - * P2.1 - BoosterPack BP19 (input pullup) - * P2.2 - BoosterPack BP35 (input pullup) - * P2.3 - BoosterPack BP31 (input pullup) - * P2.4 - BoosterPack BP12 (input pullup) - * P2.5 - BoosterPack BP13 (input pullup) - * P2.6 - BoosterPack BP39 (input pullup) - * P2.7 - BoosterPack BP40 (input pullup) - */ -#define VAL_IOPORT1_OUT 0xFFFE -#define VAL_IOPORT1_DIR 0x0001 -#define VAL_IOPORT1_REN 0xFFFE -#define VAL_IOPORT1_SEL0 0x0000 -#define VAL_IOPORT1_SEL1 0x0000 -#define VAL_IOPORT1_IES 0x0006 -#define VAL_IOPORT1_IE 0x0006 - -/* - * Port B setup: - * - * P3.0 - BoosterPack BP33 (input pullup) - * P3.1 - BoosterPack BP32 (input pullup) - * P3.2 - BoosterPack BP5 (input pullup) - * P3.3 - BoosterPack BP38 (input pullup) - * P3.4 - Application UART TX (alternate 1) - * P3.5 - Application UART RX (alternate 1) - * P3.6 - BoosterPack BP37 (input pullup) - * P3.7 - BoosterPack BP36 (input pullup) - * P4.0 - BoosterPack BP10 (input pullup) - * P4.1 - BoosterPack BP9 (input pullup) - * P4.2 - BoosterPack BP4 (input pullup) - * P4.3 - BoosterPack BP3 (input pullup) - * P4.4 - LCD S8 (input pullup) - * P4.5 - LCD S7 (input pullup) - * P4.6 - LCD S6 (input pullup) - * P4.7 - BoosterPack BP11 (input pullup) - */ -#define VAL_IOPORT2_OUT 0xFFCF -#define VAL_IOPORT2_DIR 0x0000 -#define VAL_IOPORT2_REN 0xFFCF -#define VAL_IOPORT2_SEL0 0x0030 -#define VAL_IOPORT2_SEL1 0x0000 -#define VAL_IOPORT2_IES 0x0000 -#define VAL_IOPORT2_IE 0x0000 - -/* - * Port C setup: - * - * P5.0 - LCD S38 (input pullup) - * P5.1 - LCD S37 (input pullup) - * P5.2 - LCD S36 (input pullup) - * P5.3 - LCD S35 (input pullup) - * P5.4 - LCD S12 (input pullup) - * P5.5 - LCD S11 (input pullup) - * P5.6 - LCD S10 (input pullup) - * P5.7 - LCD S9 (input pullup) - * P6.0 - LCD R23 (input pullup) - * P6.1 - LCD R13 (input pullup) - * P6.2 - LCD R03 (input pullup) - * P6.3 - LCD COM0 (input pullup) - * P6.4 - LCD COM1 (input pullup) - * P6.5 - LCD COM2 (input pullup) - * P6.6 - LCD COM3 (input pullup) - * P6.7 - LCD S31 (input pullup) - */ -#define VAL_IOPORT3_OUT 0xFFFF -#define VAL_IOPORT3_DIR 0x0000 -#define VAL_IOPORT3_REN 0xFFFF -#define VAL_IOPORT3_SEL0 0x0000 -#define VAL_IOPORT3_SEL1 0x0000 -#define VAL_IOPORT3_IES 0x0000 -#define VAL_IOPORT3_IE 0x0000 - -/* - * Port D setup: - * - * P7.0 - LCD S17 (input pullup) - * P7.1 - LCD S16 (input pullup) - * P7.2 - LCD S15 (input pullup) - * P7.3 - LCD S14 (input pullup) - * P7.4 - LCD S13 (input pullup) - * P7.5 - LCD S30 (input pullup) - * P7.6 - LCD S29 (input pullup) - * P7.7 - LCD S27 (input pullup) - * P8.0 - LCD S21 (input pullup) - * P8.1 - LCD S20 (input pullup) - * P8.2 - LCD S19 (input pullup) - * P8.3 - LCD S18 (input pullup) - * P8.4 - BoosterPack BP23 (input pullup) - * P8.5 - BoosterPack BP24 (input pullup) - * P8.6 - BoosterPack BP25 (input pullup) - * P8.7 - BoosterPack BP26 (input pullup) - */ -#define VAL_IOPORT4_OUT 0xFFFF -#define VAL_IOPORT4_DIR 0x0000 -#define VAL_IOPORT4_REN 0xFFFF -#define VAL_IOPORT4_SEL0 0x0000 -#define VAL_IOPORT4_SEL1 0x0000 -#define VAL_IOPORT4_IES 0x0000 -#define VAL_IOPORT4_IE 0x0000 - -/* - * Port D setup: - * - * P9.0 - BoosterPack BP27 (input pullup) - * P9.1 - BoosterPack BP28 (input pullup) - * P9.2 - BoosterPack BP2 (input pullup) - * P9.3 - BoosterPack BP6 (input pullup) - * P9.4 - BoosterPack BP17 (input pullup) - * P9.5 - BoosterPack BP29 (input pullup) - * P9.6 - BoosterPack BP30 (input pullup) - * P9.7 - Green LED (output low) - * P10.0 - LCD S4 (input pullup) - * P10.1 - LCD S28 (input pullup) - * P10.2 - LCD S39 (input pullup) - * P10.3 - N/C Internally (input pullup) - * P10.4 - N/C Internally (input pullup) - * P10.5 - N/C Internally (input pullup) - * P10.6 - N/C Internally (input pullup) - * P10.7 - N/C Internally (input pullup) - */ -#define VAL_IOPORT5_OUT 0xFF7F -#define VAL_IOPORT5_DIR 0x0080 -#define VAL_IOPORT5_REN 0xFF7F -#define VAL_IOPORT5_SEL0 0x0000 -#define VAL_IOPORT5_SEL1 0x0000 -#define VAL_IOPORT5_IES 0x0000 -#define VAL_IOPORT5_IE 0x0000 - -/* - * Port J setup: - * - * PJ.0 - TDO (input pullup) - * PJ.1 - TDI (input pullup) - * PJ.2 - TMS (input pullup) - * PJ.3 - TCK (input pullup) - * PJ.4 - LFXIN (alternate 1) - * PJ.5 - LFXOUT (alternate 1) - * PJ.6 - HFXIN (N/C) (input pullup) - * PJ.7 - HFXOUT (N/C) (input pullup) - */ -#define VAL_IOPORT0_OUT 0x00FF -#define VAL_IOPORT0_DIR 0x0000 -#define VAL_IOPORT0_REN 0x00CF -#define VAL_IOPORT0_SEL0 0x0030 -#define VAL_IOPORT0_SEL1 0x0000 -#define VAL_IOPORT0_IES 0x0000 -#define VAL_IOPORT0_IE 0x0000 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk deleted file mode 100644 index ea1c237..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR6989/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR6989 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c deleted file mode 100644 index ee86d96..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - .port = IOPORT1, // PORTA - .pads = { - /* PTA0*/ PAL_MODE_ALTERNATIVE_7, /* PTA1*/ PAL_MODE_UNCONNECTED, /* PTA2*/ PAL_MODE_OUTPUT_PUSHPULL, - /* PTA3*/ PAL_MODE_ALTERNATIVE_7, /* PTA4*/ PAL_MODE_UNCONNECTED, /* PTA5*/ PAL_MODE_UNCONNECTED, - /* PTA6*/ PAL_MODE_UNCONNECTED, /* PTA7*/ PAL_MODE_UNCONNECTED, /* PTA8*/ PAL_MODE_UNCONNECTED, - /* PTA9*/ PAL_MODE_UNCONNECTED, /*PTA10*/ PAL_MODE_UNCONNECTED, /*PTA11*/ PAL_MODE_UNCONNECTED, - /*PTA12*/ PAL_MODE_UNCONNECTED, /*PTA13*/ PAL_MODE_UNCONNECTED, /*PTA14*/ PAL_MODE_UNCONNECTED, - /*PTA15*/ PAL_MODE_UNCONNECTED, /*PTA16*/ PAL_MODE_UNCONNECTED, /*PTA17*/ PAL_MODE_UNCONNECTED, - /*PTA18*/ PAL_MODE_INPUT_ANALOG, /*PTA19*/ PAL_MODE_INPUT_ANALOG, /*PTA20*/ PAL_MODE_UNCONNECTED, - /*PTA21*/ PAL_MODE_UNCONNECTED, /*PTA22*/ PAL_MODE_UNCONNECTED, /*PTA23*/ PAL_MODE_UNCONNECTED, - /*PTA24*/ PAL_MODE_UNCONNECTED, /*PTA25*/ PAL_MODE_UNCONNECTED, /*PTA26*/ PAL_MODE_UNCONNECTED, - /*PTA27*/ PAL_MODE_UNCONNECTED, /*PTA28*/ PAL_MODE_UNCONNECTED, /*PTA29*/ PAL_MODE_UNCONNECTED, - /*PTA30*/ PAL_MODE_UNCONNECTED, /*PTA31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT2, // PORTB - .pads = { - /* PTB0*/ PAL_MODE_ALTERNATIVE_2, /* PTB1*/ PAL_MODE_ALTERNATIVE_2, /* PTB2*/ PAL_MODE_UNCONNECTED, - /* PTB3*/ PAL_MODE_UNCONNECTED, /* PTB4*/ PAL_MODE_UNCONNECTED, /* PTB5*/ PAL_MODE_UNCONNECTED, - /* PTB6*/ PAL_MODE_UNCONNECTED, /* PTB7*/ PAL_MODE_UNCONNECTED, /* PTB8*/ PAL_MODE_UNCONNECTED, - /* PTB9*/ PAL_MODE_UNCONNECTED, /*PTB10*/ PAL_MODE_UNCONNECTED, /*PTB11*/ PAL_MODE_UNCONNECTED, - /*PTB12*/ PAL_MODE_UNCONNECTED, /*PTB13*/ PAL_MODE_UNCONNECTED, /*PTB14*/ PAL_MODE_UNCONNECTED, - /*PTB15*/ PAL_MODE_UNCONNECTED, /*PTB16*/ PAL_MODE_ALTERNATIVE_3, /*PTB17*/ PAL_MODE_ALTERNATIVE_3, - /*PTB18*/ PAL_MODE_UNCONNECTED, /*PTB19*/ PAL_MODE_UNCONNECTED, /*PTB20*/ PAL_MODE_UNCONNECTED, - /*PTB21*/ PAL_MODE_UNCONNECTED, /*PTB22*/ PAL_MODE_UNCONNECTED, /*PTB23*/ PAL_MODE_UNCONNECTED, - /*PTB24*/ PAL_MODE_UNCONNECTED, /*PTB25*/ PAL_MODE_UNCONNECTED, /*PTB26*/ PAL_MODE_UNCONNECTED, - /*PTB27*/ PAL_MODE_UNCONNECTED, /*PTB28*/ PAL_MODE_UNCONNECTED, /*PTB29*/ PAL_MODE_UNCONNECTED, - /*PTB30*/ PAL_MODE_UNCONNECTED, /*PTB31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT3, // PORTC - .pads = { - /* PTC0*/ PAL_MODE_UNCONNECTED, /* PTC1*/ PAL_MODE_UNCONNECTED, /* PTC2*/ PAL_MODE_UNCONNECTED, - /* PTC3*/ PAL_MODE_OUTPUT_PUSHPULL, /* PTC4*/ PAL_MODE_UNCONNECTED, /* PTC5*/ PAL_MODE_UNCONNECTED, - /* PTC6*/ PAL_MODE_UNCONNECTED, /* PTC7*/ PAL_MODE_UNCONNECTED, /* PTC8*/ PAL_MODE_UNCONNECTED, - /* PTC9*/ PAL_MODE_UNCONNECTED, /*PTC10*/ PAL_MODE_UNCONNECTED, /*PTC11*/ PAL_MODE_UNCONNECTED, - /*PTC12*/ PAL_MODE_UNCONNECTED, /*PTC13*/ PAL_MODE_UNCONNECTED, /*PTC14*/ PAL_MODE_UNCONNECTED, - /*PTC15*/ PAL_MODE_UNCONNECTED, /*PTC16*/ PAL_MODE_UNCONNECTED, /*PTC17*/ PAL_MODE_UNCONNECTED, - /*PTC18*/ PAL_MODE_UNCONNECTED, /*PTC19*/ PAL_MODE_UNCONNECTED, /*PTC20*/ PAL_MODE_UNCONNECTED, - /*PTC21*/ PAL_MODE_UNCONNECTED, /*PTC22*/ PAL_MODE_UNCONNECTED, /*PTC23*/ PAL_MODE_UNCONNECTED, - /*PTC24*/ PAL_MODE_UNCONNECTED, /*PTC25*/ PAL_MODE_UNCONNECTED, /*PTC26*/ PAL_MODE_UNCONNECTED, - /*PTC27*/ PAL_MODE_UNCONNECTED, /*PTC28*/ PAL_MODE_UNCONNECTED, /*PTC29*/ PAL_MODE_UNCONNECTED, - /*PTC30*/ PAL_MODE_UNCONNECTED, /*PTC31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT4, // PORTD - .pads = { - /* PTD0*/ PAL_MODE_UNCONNECTED, /* PTD1*/ PAL_MODE_UNCONNECTED, /* PTD2*/ PAL_MODE_UNCONNECTED, - /* PTD3*/ PAL_MODE_UNCONNECTED, /* PTD4*/ PAL_MODE_OUTPUT_PUSHPULL, /* PTD5*/ PAL_MODE_UNCONNECTED, - /* PTD6*/ PAL_MODE_UNCONNECTED, /* PTD7*/ PAL_MODE_UNCONNECTED, /* PTD8*/ PAL_MODE_UNCONNECTED, - /* PTD9*/ PAL_MODE_UNCONNECTED, /*PTD10*/ PAL_MODE_UNCONNECTED, /*PTD11*/ PAL_MODE_UNCONNECTED, - /*PTD12*/ PAL_MODE_UNCONNECTED, /*PTD13*/ PAL_MODE_UNCONNECTED, /*PTD14*/ PAL_MODE_UNCONNECTED, - /*PTD15*/ PAL_MODE_UNCONNECTED, /*PTD16*/ PAL_MODE_UNCONNECTED, /*PTD17*/ PAL_MODE_UNCONNECTED, - /*PTD18*/ PAL_MODE_UNCONNECTED, /*PTD19*/ PAL_MODE_UNCONNECTED, /*PTD20*/ PAL_MODE_UNCONNECTED, - /*PTD21*/ PAL_MODE_UNCONNECTED, /*PTD22*/ PAL_MODE_UNCONNECTED, /*PTD23*/ PAL_MODE_UNCONNECTED, - /*PTD24*/ PAL_MODE_UNCONNECTED, /*PTD25*/ PAL_MODE_UNCONNECTED, /*PTD26*/ PAL_MODE_UNCONNECTED, - /*PTD27*/ PAL_MODE_UNCONNECTED, /*PTD28*/ PAL_MODE_UNCONNECTED, /*PTD29*/ PAL_MODE_UNCONNECTED, - /*PTD30*/ PAL_MODE_UNCONNECTED, /*PTD31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT5, // PORTE - .pads = { - /* PTE0*/ PAL_MODE_UNCONNECTED, /* PTE1*/ PAL_MODE_UNCONNECTED, /* PTE2*/ PAL_MODE_UNCONNECTED, - /* PTE3*/ PAL_MODE_UNCONNECTED, /* PTE4*/ PAL_MODE_UNCONNECTED, /* PTE5*/ PAL_MODE_UNCONNECTED, - /* PTE6*/ PAL_MODE_UNCONNECTED, /* PTE7*/ PAL_MODE_UNCONNECTED, /* PTE8*/ PAL_MODE_UNCONNECTED, - /* PTE9*/ PAL_MODE_UNCONNECTED, /*PTE10*/ PAL_MODE_UNCONNECTED, /*PTE11*/ PAL_MODE_UNCONNECTED, - /*PTE12*/ PAL_MODE_UNCONNECTED, /*PTE13*/ PAL_MODE_UNCONNECTED, /*PTE14*/ PAL_MODE_UNCONNECTED, - /*PTE15*/ PAL_MODE_UNCONNECTED, /*PTE16*/ PAL_MODE_UNCONNECTED, /*PTE17*/ PAL_MODE_UNCONNECTED, - /*PTE18*/ PAL_MODE_UNCONNECTED, /*PTE19*/ PAL_MODE_UNCONNECTED, /*PTE20*/ PAL_MODE_UNCONNECTED, - /*PTE21*/ PAL_MODE_UNCONNECTED, /*PTE22*/ PAL_MODE_UNCONNECTED, /*PTE23*/ PAL_MODE_UNCONNECTED, - /*PTE24*/ PAL_MODE_UNCONNECTED, /*PTE25*/ PAL_MODE_UNCONNECTED, /*PTE26*/ PAL_MODE_UNCONNECTED, - /*PTE27*/ PAL_MODE_UNCONNECTED, /*PTE28*/ PAL_MODE_UNCONNECTED, /*PTE29*/ PAL_MODE_UNCONNECTED, - /*PTE30*/ PAL_MODE_UNCONNECTED, /*PTE31*/ PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - k20x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h deleted file mode 100644 index 8f8605c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Freescale Freedom K20D50M board. - */ - -/* - * Board identifier. - */ -#define BOARD_FREESCALE_FREEDOM_K20D50M -#define BOARD_NAME "Freescale Freedom K20D50M" - -/* External 8 MHz crystal. */ -#define KINETIS_XTAL_FREQUENCY 8000000UL - -/* - * MCU type - */ -#define K20x5 - -/* - * Onboard features. - */ -#define GPIO_LED_RED IOPORT3 -#define PIN_LED_RED 3 -#define GPIO_LED_GREEN IOPORT4 -#define PIN_LED_GREEN 4 -#define GPIO_LED_BLUE IOPORT1 -#define PIN_LED_BLUE 2 - -/* Inertial sensor: MMA8451Q */ -/* Default I2C address 0x1D */ -#define I2C_GYRO I2C0 - -#define LINE_LED_RED PAL_LINE(GPIO_LED_RED, PIN_LED_RED) -#define LINE_LED_GREEN PAL_LINE(GPIO_LED_GREEN, PIN_LED_GREEN) -#define LINE_LED_BLUE PAL_LINE(GPIO_LED_BLUE, PIN_LED_BLUE) -#define LINE_GYRO_SCL PAL_LINE(GPIOB, 0U) -#define LINE_GYRO_SDA PAL_LINE(GPIOB, 1U) -#define LINE_GYRO_INT1 PAL_LINE(GPIOC, 11U) -#define LINE_GYRO_INT2 PAL_LINE(GPIOC, 6U) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk deleted file mode 100644 index f74d306..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/FREESCALE_FREEDOM_K20D50M diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c deleted file mode 100644 index f5bd3ac..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - .port = IOPORT1, // PORTA - .pads = { - /* PTA0*/ PAL_MODE_ALTERNATIVE_7, /* PTA1*/ PAL_MODE_ALTERNATIVE_2, /* PTA2*/ PAL_MODE_ALTERNATIVE_2, - /* PTA3*/ PAL_MODE_ALTERNATIVE_7, /* PTA4*/ PAL_MODE_INPUT_ANALOG, /* PTA5*/ PAL_MODE_INPUT_ANALOG, - /* PTA6*/ PAL_MODE_UNCONNECTED, /* PTA7*/ PAL_MODE_UNCONNECTED, /* PTA8*/ PAL_MODE_UNCONNECTED, - /* PTA9*/ PAL_MODE_UNCONNECTED, /*PTA10*/ PAL_MODE_UNCONNECTED, /*PTA11*/ PAL_MODE_UNCONNECTED, - /*PTA12*/ PAL_MODE_INPUT_ANALOG, /*PTA13*/ PAL_MODE_INPUT_ANALOG, /*PTA14*/ PAL_MODE_INPUT_ANALOG, - /*PTA15*/ PAL_MODE_INPUT_ANALOG, /*PTA16*/ PAL_MODE_INPUT_ANALOG, /*PTA17*/ PAL_MODE_INPUT_ANALOG, - /*PTA18*/ PAL_MODE_INPUT_ANALOG, /*PTA19*/ PAL_MODE_INPUT_ANALOG, /*PTA20*/ PAL_MODE_ALTERNATIVE_7, - /*PTA21*/ PAL_MODE_UNCONNECTED, /*PTA22*/ PAL_MODE_UNCONNECTED, /*PTA23*/ PAL_MODE_UNCONNECTED, - /*PTA24*/ PAL_MODE_UNCONNECTED, /*PTA25*/ PAL_MODE_UNCONNECTED, /*PTA26*/ PAL_MODE_UNCONNECTED, - /*PTA27*/ PAL_MODE_UNCONNECTED, /*PTA28*/ PAL_MODE_UNCONNECTED, /*PTA29*/ PAL_MODE_UNCONNECTED, - /*PTA30*/ PAL_MODE_UNCONNECTED, /*PTA31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT2, // PORTB - .pads = { - /* PTB0*/ PAL_MODE_INPUT_ANALOG, /* PTB1*/ PAL_MODE_INPUT_ANALOG, /* PTB2*/ PAL_MODE_INPUT_ANALOG, - /* PTB3*/ PAL_MODE_INPUT_ANALOG, /* PTB4*/ PAL_MODE_UNCONNECTED, /* PTB5*/ PAL_MODE_UNCONNECTED, - /* PTB6*/ PAL_MODE_UNCONNECTED, /* PTB7*/ PAL_MODE_UNCONNECTED, /* PTB8*/ PAL_MODE_INPUT_ANALOG, - /* PTB9*/ PAL_MODE_INPUT_ANALOG, /*PTB10*/ PAL_MODE_INPUT_ANALOG, /*PTB11*/ PAL_MODE_INPUT_ANALOG, - /*PTB12*/ PAL_MODE_UNCONNECTED, /*PTB13*/ PAL_MODE_UNCONNECTED, /*PTB14*/ PAL_MODE_UNCONNECTED, - /*PTB15*/ PAL_MODE_UNCONNECTED, /*PTB16*/ PAL_MODE_INPUT_ANALOG, /*PTB17*/ PAL_MODE_INPUT_ANALOG, - /*PTB18*/ PAL_MODE_OUTPUT_PUSHPULL, /*PTB19*/ PAL_MODE_OUTPUT_PUSHPULL, /*PTB20*/ PAL_MODE_UNCONNECTED, - /*PTB21*/ PAL_MODE_UNCONNECTED, /*PTB22*/ PAL_MODE_UNCONNECTED, /*PTB23*/ PAL_MODE_UNCONNECTED, - /*PTB24*/ PAL_MODE_UNCONNECTED, /*PTB25*/ PAL_MODE_UNCONNECTED, /*PTB26*/ PAL_MODE_UNCONNECTED, - /*PTB27*/ PAL_MODE_UNCONNECTED, /*PTB28*/ PAL_MODE_UNCONNECTED, /*PTB29*/ PAL_MODE_UNCONNECTED, - /*PTB30*/ PAL_MODE_UNCONNECTED, /*PTB31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT3, // PORTC - .pads = { - /* PTC0*/ PAL_MODE_INPUT_ANALOG, /* PTC1*/ PAL_MODE_INPUT_ANALOG, /* PTC2*/ PAL_MODE_INPUT_ANALOG, - /* PTC3*/ PAL_MODE_INPUT_ANALOG, /* PTC4*/ PAL_MODE_INPUT_ANALOG, /* PTC5*/ PAL_MODE_INPUT_ANALOG, - /* PTC6*/ PAL_MODE_INPUT_ANALOG, /* PTC7*/ PAL_MODE_INPUT_ANALOG, /* PTC8*/ PAL_MODE_INPUT_ANALOG, - /* PTC9*/ PAL_MODE_INPUT_ANALOG, /*PTC10*/ PAL_MODE_INPUT_ANALOG, /*PTC11*/ PAL_MODE_INPUT_ANALOG, - /*PTC12*/ PAL_MODE_INPUT_ANALOG, /*PTC13*/ PAL_MODE_INPUT_ANALOG, /*PTC14*/ PAL_MODE_INPUT_ANALOG, - /*PTC15*/ PAL_MODE_INPUT_ANALOG, /*PTC16*/ PAL_MODE_INPUT_ANALOG, /*PTC17*/ PAL_MODE_INPUT_ANALOG, - /*PTC18*/ PAL_MODE_UNCONNECTED, /*PTC19*/ PAL_MODE_UNCONNECTED, /*PTC20*/ PAL_MODE_UNCONNECTED, - /*PTC21*/ PAL_MODE_UNCONNECTED, /*PTC22*/ PAL_MODE_UNCONNECTED, /*PTC23*/ PAL_MODE_UNCONNECTED, - /*PTC24*/ PAL_MODE_UNCONNECTED, /*PTC25*/ PAL_MODE_UNCONNECTED, /*PTC26*/ PAL_MODE_UNCONNECTED, - /*PTC27*/ PAL_MODE_UNCONNECTED, /*PTC28*/ PAL_MODE_UNCONNECTED, /*PTC29*/ PAL_MODE_UNCONNECTED, - /*PTC30*/ PAL_MODE_UNCONNECTED, /*PTC31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT4, // PORTD - .pads = { - /* PTD0*/ PAL_MODE_INPUT_ANALOG, /* PTD1*/ PAL_MODE_OUTPUT_PUSHPULL, /* PTD2*/ PAL_MODE_INPUT_ANALOG, - /* PTD3*/ PAL_MODE_INPUT_ANALOG, /* PTD4*/ PAL_MODE_INPUT_ANALOG, /* PTD5*/ PAL_MODE_INPUT_ANALOG, - /* PTD6*/ PAL_MODE_INPUT_ANALOG, /* PTD7*/ PAL_MODE_INPUT_ANALOG, /* PTD8*/ PAL_MODE_INPUT_ANALOG, - /* PTD9*/ PAL_MODE_UNCONNECTED, /*PTD10*/ PAL_MODE_UNCONNECTED, /*PTD11*/ PAL_MODE_UNCONNECTED, - /*PTD12*/ PAL_MODE_UNCONNECTED, /*PTD13*/ PAL_MODE_UNCONNECTED, /*PTD14*/ PAL_MODE_UNCONNECTED, - /*PTD15*/ PAL_MODE_UNCONNECTED, /*PTD16*/ PAL_MODE_UNCONNECTED, /*PTD17*/ PAL_MODE_UNCONNECTED, - /*PTD18*/ PAL_MODE_UNCONNECTED, /*PTD19*/ PAL_MODE_UNCONNECTED, /*PTD20*/ PAL_MODE_UNCONNECTED, - /*PTD21*/ PAL_MODE_UNCONNECTED, /*PTD22*/ PAL_MODE_UNCONNECTED, /*PTD23*/ PAL_MODE_UNCONNECTED, - /*PTD24*/ PAL_MODE_UNCONNECTED, /*PTD25*/ PAL_MODE_UNCONNECTED, /*PTD26*/ PAL_MODE_UNCONNECTED, - /*PTD27*/ PAL_MODE_UNCONNECTED, /*PTD28*/ PAL_MODE_UNCONNECTED, /*PTD29*/ PAL_MODE_UNCONNECTED, - /*PTD30*/ PAL_MODE_UNCONNECTED, /*PTD31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT5, // PORTE - .pads = { - /* PTE0*/ PAL_MODE_INPUT_ANALOG, /* PTE1*/ PAL_MODE_INPUT_ANALOG, /* PTE2*/ PAL_MODE_INPUT_ANALOG, - /* PTE3*/ PAL_MODE_INPUT_ANALOG, /* PTE4*/ PAL_MODE_INPUT_ANALOG, /* PTE5*/ PAL_MODE_INPUT_ANALOG, - /* PTE6*/ PAL_MODE_UNCONNECTED, /* PTE7*/ PAL_MODE_UNCONNECTED, /* PTE8*/ PAL_MODE_UNCONNECTED, - /* PTE9*/ PAL_MODE_UNCONNECTED, /*PTE10*/ PAL_MODE_UNCONNECTED, /*PTE11*/ PAL_MODE_UNCONNECTED, - /*PTE12*/ PAL_MODE_UNCONNECTED, /*PTE13*/ PAL_MODE_UNCONNECTED, /*PTE14*/ PAL_MODE_UNCONNECTED, - /*PTE15*/ PAL_MODE_UNCONNECTED, /*PTE16*/ PAL_MODE_UNCONNECTED, /*PTE17*/ PAL_MODE_UNCONNECTED, - /*PTE18*/ PAL_MODE_UNCONNECTED, /*PTE19*/ PAL_MODE_UNCONNECTED, /*PTE20*/ PAL_MODE_INPUT_ANALOG, - /*PTE21*/ PAL_MODE_INPUT_ANALOG, /*PTE22*/ PAL_MODE_INPUT_ANALOG, /*PTE23*/ PAL_MODE_INPUT_ANALOG, - /*PTE24*/ PAL_MODE_ALTERNATIVE_5, /*PTE25*/ PAL_MODE_ALTERNATIVE_5, /*PTE26*/ PAL_MODE_UNCONNECTED, - /*PTE27*/ PAL_MODE_UNCONNECTED, /*PTE28*/ PAL_MODE_UNCONNECTED, /*PTE29*/ PAL_MODE_INPUT_ANALOG, - /*PTE30*/ PAL_MODE_INPUT_ANALOG, /*PTE31*/ PAL_MODE_INPUT_ANALOG, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - kl2x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h deleted file mode 100644 index 289ee91..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Freescale Freedom KL25Z board. - */ - -/* - * Board identifier. - */ -#define BOARD_FREESCALE_FREEDOM_KL25Z -#define BOARD_NAME "Freescale Freedom KL25Z" - -/* External 8 MHz crystal. */ -#define KINETIS_XTAL_FREQUENCY 8000000UL - -/* - * MCU type - */ -#define KL25 - -/* - * Onboard features. - */ -#define GPIO_LED_RED IOPORT2 -#define PIN_LED_RED 18 -#define GPIO_LED_GREEN IOPORT2 -#define PIN_LED_GREEN 19 -#define GPIO_LED_BLUE IOPORT4 -#define PIN_LED_BLUE 1 - -/* Inertial sensor: MMA8451Q */ -/* Default I2C address 0x1D */ -/* Note: the pins PTE24/25 are assigned to I2C0 by default; - * if I2C0 is wanted on other pins, these need to be - * assigned another function explicitly! - */ -#define I2C_GYRO I2C0 - -#define LINE_LED_RED PAL_LINE(GPIO_LED_RED, PIN_LED_RED) -#define LINE_LED_GREEN PAL_LINE(GPIO_LED_GREEN, PIN_LED_GREEN) -#define LINE_LED_BLUE PAL_LINE(GPIO_LED_BLUE, PIN_LED_BLUE) -#define LINE_GYRO_SCL PAL_LINE(GPIOE, 24U) -#define LINE_GYRO_SDA PAL_LINE(GPIOE, 25U) -#define LINE_GYRO_INT1 PAL_LINE(GPIOA, 14U) -#define LINE_GYRO_INT2 PAL_LINE(GPIOA, 15U) - -/* - * Not configured: - * - TSI Slider on PTB16/TSI0_CH9 and PTB17/TSI_CH10 - */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk deleted file mode 100644 index 3097a90..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/FREESCALE_FREEDOM_KL25Z diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.c b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.c deleted file mode 100644 index 7c68f66..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - .port = IOPORT1, // PORTA - .pads = { - /* PTA0*/ PAL_MODE_ALTERNATIVE_7, /* PTA1*/ PAL_MODE_ALTERNATIVE_2, /* PTA2*/ PAL_MODE_ALTERNATIVE_2, - /* PTA3*/ PAL_MODE_ALTERNATIVE_7, /* PTA4*/ PAL_MODE_INPUT_ANALOG, /* PTA5*/ PAL_MODE_INPUT_ANALOG, - /* PTA6*/ PAL_MODE_UNCONNECTED, /* PTA7*/ PAL_MODE_UNCONNECTED, /* PTA8*/ PAL_MODE_UNCONNECTED, - /* PTA9*/ PAL_MODE_UNCONNECTED, /*PTA10*/ PAL_MODE_UNCONNECTED, /*PTA11*/ PAL_MODE_UNCONNECTED, - /*PTA12*/ PAL_MODE_INPUT_ANALOG, /*PTA13*/ PAL_MODE_INPUT_ANALOG, /*PTA14*/ PAL_MODE_UNCONNECTED, - /*PTA15*/ PAL_MODE_UNCONNECTED, /*PTA16*/ PAL_MODE_UNCONNECTED, /*PTA17*/ PAL_MODE_UNCONNECTED, - /*PTA18*/ PAL_MODE_INPUT_ANALOG, /*PTA19*/ PAL_MODE_INPUT_ANALOG, /*PTA20*/ PAL_MODE_ALTERNATIVE_7, - /*PTA21*/ PAL_MODE_UNCONNECTED, /*PTA22*/ PAL_MODE_UNCONNECTED, /*PTA23*/ PAL_MODE_UNCONNECTED, - /*PTA24*/ PAL_MODE_UNCONNECTED, /*PTA25*/ PAL_MODE_UNCONNECTED, /*PTA26*/ PAL_MODE_UNCONNECTED, - /*PTA27*/ PAL_MODE_UNCONNECTED, /*PTA28*/ PAL_MODE_UNCONNECTED, /*PTA29*/ PAL_MODE_UNCONNECTED, - /*PTA30*/ PAL_MODE_UNCONNECTED, /*PTA31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT2, // PORTB - .pads = { - /* PTB0*/ PAL_MODE_INPUT_ANALOG, /* PTB1*/ PAL_MODE_INPUT_ANALOG, /* PTB2*/ PAL_MODE_INPUT_ANALOG, - /* PTB3*/ PAL_MODE_INPUT_ANALOG, /* PTB4*/ PAL_MODE_UNCONNECTED, /* PTB5*/ PAL_MODE_UNCONNECTED, - /* PTB6*/ PAL_MODE_UNCONNECTED, /* PTB7*/ PAL_MODE_UNCONNECTED, /* PTB8*/ PAL_MODE_INPUT_ANALOG, - /* PTB9*/ PAL_MODE_UNCONNECTED, /*PTB10*/ PAL_MODE_UNCONNECTED, /*PTB11*/ PAL_MODE_UNCONNECTED, - /*PTB12*/ PAL_MODE_UNCONNECTED, /*PTB13*/ PAL_MODE_UNCONNECTED, /*PTB14*/ PAL_MODE_UNCONNECTED, - /*PTB15*/ PAL_MODE_UNCONNECTED, /*PTB16*/ PAL_MODE_INPUT_ANALOG, /*PTB17*/ PAL_MODE_INPUT_ANALOG, - /*PTB18*/ PAL_MODE_INPUT_ANALOG, /*PTB19*/ PAL_MODE_INPUT_ANALOG, /*PTB20*/ PAL_MODE_UNCONNECTED, - /*PTB21*/ PAL_MODE_UNCONNECTED, /*PTB22*/ PAL_MODE_UNCONNECTED, /*PTB23*/ PAL_MODE_UNCONNECTED, - /*PTB24*/ PAL_MODE_UNCONNECTED, /*PTB25*/ PAL_MODE_UNCONNECTED, /*PTB26*/ PAL_MODE_UNCONNECTED, - /*PTB27*/ PAL_MODE_UNCONNECTED, /*PTB28*/ PAL_MODE_UNCONNECTED, /*PTB29*/ PAL_MODE_UNCONNECTED, - /*PTB30*/ PAL_MODE_UNCONNECTED, /*PTB31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT3, // PORTC - .pads = { - /* PTC0*/ PAL_MODE_INPUT_ANALOG, /* PTC1*/ PAL_MODE_INPUT_ANALOG, /* PTC2*/ PAL_MODE_INPUT_ANALOG, - /* PTC3*/ PAL_MODE_INPUT, /* PTC4*/ PAL_MODE_INPUT_ANALOG, /* PTC5*/ PAL_MODE_INPUT_ANALOG, - /* PTC6*/ PAL_MODE_INPUT_ANALOG, /* PTC7*/ PAL_MODE_INPUT_ANALOG, /* PTC8*/ PAL_MODE_INPUT_ANALOG, - /* PTC9*/ PAL_MODE_INPUT_ANALOG, /*PTC10*/ PAL_MODE_INPUT_ANALOG, /*PTC11*/ PAL_MODE_INPUT_ANALOG, - /*PTC12*/ PAL_MODE_UNCONNECTED, /*PTC13*/ PAL_MODE_UNCONNECTED, /*PTC14*/ PAL_MODE_UNCONNECTED, - /*PTC15*/ PAL_MODE_UNCONNECTED, /*PTC16*/ PAL_MODE_UNCONNECTED, /*PTC17*/ PAL_MODE_UNCONNECTED, - /*PTC18*/ PAL_MODE_UNCONNECTED, /*PTC19*/ PAL_MODE_UNCONNECTED, /*PTC20*/ PAL_MODE_UNCONNECTED, - /*PTC21*/ PAL_MODE_UNCONNECTED, /*PTC22*/ PAL_MODE_UNCONNECTED, /*PTC23*/ PAL_MODE_UNCONNECTED, - /*PTC24*/ PAL_MODE_UNCONNECTED, /*PTC25*/ PAL_MODE_UNCONNECTED, /*PTC26*/ PAL_MODE_UNCONNECTED, - /*PTC27*/ PAL_MODE_UNCONNECTED, /*PTC28*/ PAL_MODE_UNCONNECTED, /*PTC29*/ PAL_MODE_UNCONNECTED, - /*PTC30*/ PAL_MODE_UNCONNECTED, /*PTC31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT4, // PORTD - .pads = { - /* PTD0*/ PAL_MODE_INPUT_PULLUP, /* PTD1*/ PAL_MODE_INPUT_ANALOG, /* PTD2*/ PAL_MODE_INPUT_ANALOG, - /* PTD3*/ PAL_MODE_INPUT_ANALOG, /* PTD4*/ PAL_MODE_INPUT_ANALOG, /* PTD5*/ PAL_MODE_OUTPUT_PUSHPULL, - /* PTD6*/ PAL_MODE_INPUT_ANALOG, /* PTD7*/ PAL_MODE_INPUT_ANALOG, /* PTD8*/ PAL_MODE_UNCONNECTED, - /* PTD9*/ PAL_MODE_UNCONNECTED, /*PTD10*/ PAL_MODE_UNCONNECTED, /*PTD11*/ PAL_MODE_UNCONNECTED, - /*PTD12*/ PAL_MODE_UNCONNECTED, /*PTD13*/ PAL_MODE_UNCONNECTED, /*PTD14*/ PAL_MODE_UNCONNECTED, - /*PTD15*/ PAL_MODE_UNCONNECTED, /*PTD16*/ PAL_MODE_UNCONNECTED, /*PTD17*/ PAL_MODE_UNCONNECTED, - /*PTD18*/ PAL_MODE_UNCONNECTED, /*PTD19*/ PAL_MODE_UNCONNECTED, /*PTD20*/ PAL_MODE_UNCONNECTED, - /*PTD21*/ PAL_MODE_UNCONNECTED, /*PTD22*/ PAL_MODE_UNCONNECTED, /*PTD23*/ PAL_MODE_UNCONNECTED, - /*PTD24*/ PAL_MODE_UNCONNECTED, /*PTD25*/ PAL_MODE_UNCONNECTED, /*PTD26*/ PAL_MODE_UNCONNECTED, - /*PTD27*/ PAL_MODE_UNCONNECTED, /*PTD28*/ PAL_MODE_UNCONNECTED, /*PTD29*/ PAL_MODE_UNCONNECTED, - /*PTD30*/ PAL_MODE_UNCONNECTED, /*PTD31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT5, // PORTE - .pads = { - /* PTE0*/ PAL_MODE_INPUT_ANALOG, /* PTE1*/ PAL_MODE_INPUT_ANALOG, /* PTE2*/ PAL_MODE_UNCONNECTED, - /* PTE3*/ PAL_MODE_UNCONNECTED, /* PTE4*/ PAL_MODE_UNCONNECTED, /* PTE5*/ PAL_MODE_UNCONNECTED, - /* PTE6*/ PAL_MODE_UNCONNECTED, /* PTE7*/ PAL_MODE_UNCONNECTED, /* PTE8*/ PAL_MODE_UNCONNECTED, - /* PTE9*/ PAL_MODE_UNCONNECTED, /*PTE10*/ PAL_MODE_UNCONNECTED, /*PTE11*/ PAL_MODE_UNCONNECTED, - /*PTE12*/ PAL_MODE_UNCONNECTED, /*PTE13*/ PAL_MODE_UNCONNECTED, /*PTE14*/ PAL_MODE_UNCONNECTED, - /*PTE15*/ PAL_MODE_UNCONNECTED, /*PTE16*/ PAL_MODE_UNCONNECTED, /*PTE17*/ PAL_MODE_UNCONNECTED, - /*PTE18*/ PAL_MODE_UNCONNECTED, /*PTE19*/ PAL_MODE_UNCONNECTED, /*PTE20*/ PAL_MODE_INPUT_ANALOG, - /*PTE21*/ PAL_MODE_INPUT_ANALOG, /*PTE22*/ PAL_MODE_INPUT, /*PTE23*/ PAL_MODE_INPUT_ANALOG, - /*PTE24*/ PAL_MODE_ALTERNATIVE_5, /*PTE25*/ PAL_MODE_ALTERNATIVE_5, /*PTE26*/ PAL_MODE_UNCONNECTED, - /*PTE27*/ PAL_MODE_UNCONNECTED, /*PTE28*/ PAL_MODE_UNCONNECTED, /*PTE29*/ PAL_MODE_OUTPUT_PUSHPULL, - /*PTE30*/ PAL_MODE_INPUT_ANALOG, /*PTE31*/ PAL_MODE_OUTPUT_PUSHPULL, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - kl2x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.h b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.h deleted file mode 100644 index 1db7947..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Freescale Freedom KL26Z board. - */ - -/* - * Board identifier. - */ -#define BOARD_FREESCALE_FREEDOM_KL26Z -#define BOARD_NAME "Freescale Freedom KL26Z" - -/* External 8 MHz crystal. */ -#define KINETIS_XTAL_FREQUENCY 8000000UL - -/* - * MCU type - */ -#define KL26 - -/* - * Onboard features. - */ -#define GPIO_LED_RED IOPORT5 -#define PIN_LED_RED 29 -#define GPIO_LED_GREEN IOPORT5 -#define PIN_LED_GREEN 31 -#define GPIO_LED_BLUE IOPORT4 -#define PIN_LED_BLUE 5 -#define GPIO_BUTTON IOPORT4 -#define PIN_BUTTON 0 -#define GPIO_LIGHT_SENSOR IOPORT5 -#define PIN_LIGHT_SENSOR 22 - -/* Inertial sensor: FXOS8700CQ */ -/* Default I2C address 0x1D */ -/* Note: the pins PTE24/25 are assigned to I2C0 by default; - * if I2C0 is wanted on other pins, these need to be - * assigned another function explicitly! - */ -#define I2C_GYRO I2C0 - -#define LINE_LED_RED PAL_LINE(GPIO_LED_RED, PIN_LED_RED) -#define LINE_LED_GREEN PAL_LINE(GPIO_LED_GREEN, PIN_LED_GREEN) -#define LINE_LED_BLUE PAL_LINE(GPIO_LED_BLUE, PIN_LED_BLUE) -#define LINE_BUTTON PAL_LINE(GPIO_BUTTON, PIN_BUTTON) -#define LINE_LIGHT_SENSOR PAL_LINE(GPIO_LIGHT_SENSOR, PIN_LIGHT_SENSOR) -#define LINE_GYRO_SCL PAL_LINE(GPIOE, 24U) -#define LINE_GYRO_SDA PAL_LINE(GPIOE, 25U) -#define LINE_GYRO_INT1 PAL_LINE(GPIOD, 0U) -#define LINE_GYRO_INT2 PAL_LINE(GPIOD, 1U) - -/* - * Not configured: - * - TSI Slider on PTB16/TSI0_CH9 and PTB17/TSI_CH10 - * - I2C inertial sensor on I2C0, routed to PTE25 and PTE25 - * Note: these pins are assigned to I2C0 by default; - * if I2C0 is wanted on other pins, these need to be - * assigned another function explicitly! - */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk deleted file mode 100644 index c352346..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/FREESCALE_FREEDOM_KL26Z diff --git a/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.c b/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.c deleted file mode 100644 index d67e6ce..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - .port = IOPORT1, // PORTA - .pads = { - /* PTA0*/ PAL_MODE_ALTERNATIVE_7, /* PTA1*/ PAL_MODE_UNCONNECTED, /* PTA2*/ PAL_MODE_UNCONNECTED, - /* PTA3*/ PAL_MODE_ALTERNATIVE_7, /* PTA4*/ PAL_MODE_UNCONNECTED, /* PTA5*/ PAL_MODE_UNCONNECTED, - /* PTA6*/ PAL_MODE_UNCONNECTED, /* PTA7*/ PAL_MODE_UNCONNECTED, /* PTA8*/ PAL_MODE_UNCONNECTED, - /* PTA9*/ PAL_MODE_UNCONNECTED, /*PTA10*/ PAL_MODE_UNCONNECTED, /*PTA11*/ PAL_MODE_UNCONNECTED, - /*PTA12*/ PAL_MODE_UNCONNECTED, /*PTA13*/ PAL_MODE_UNCONNECTED, /*PTA14*/ PAL_MODE_UNCONNECTED, - /*PTA15*/ PAL_MODE_UNCONNECTED, /*PTA16*/ PAL_MODE_UNCONNECTED, /*PTA17*/ PAL_MODE_UNCONNECTED, - /*PTA18*/ PAL_MODE_UNCONNECTED, /*PTA19*/ PAL_MODE_UNCONNECTED, /*PTA20*/ PAL_MODE_UNCONNECTED, - /*PTA21*/ PAL_MODE_UNCONNECTED, /*PTA22*/ PAL_MODE_UNCONNECTED, /*PTA23*/ PAL_MODE_UNCONNECTED, - /*PTA24*/ PAL_MODE_UNCONNECTED, /*PTA25*/ PAL_MODE_UNCONNECTED, /*PTA26*/ PAL_MODE_UNCONNECTED, - /*PTA27*/ PAL_MODE_UNCONNECTED, /*PTA28*/ PAL_MODE_UNCONNECTED, /*PTA29*/ PAL_MODE_UNCONNECTED, - /*PTA30*/ PAL_MODE_UNCONNECTED, /*PTA31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT2, // PORTB - .pads = { - /* PTB0*/ PAL_MODE_UNCONNECTED, /* PTB1*/ PAL_MODE_UNCONNECTED, /* PTB2*/ PAL_MODE_UNCONNECTED, - /* PTB3*/ PAL_MODE_UNCONNECTED, /* PTB4*/ PAL_MODE_UNCONNECTED, /* PTB5*/ PAL_MODE_UNCONNECTED, - /* PTB6*/ PAL_MODE_UNCONNECTED, /* PTB7*/ PAL_MODE_UNCONNECTED, /* PTB8*/ PAL_MODE_UNCONNECTED, - /* PTB9*/ PAL_MODE_UNCONNECTED, /*PTB10*/ PAL_MODE_UNCONNECTED, /*PTB11*/ PAL_MODE_UNCONNECTED, - /*PTB12*/ PAL_MODE_UNCONNECTED, /*PTB13*/ PAL_MODE_UNCONNECTED, /*PTB14*/ PAL_MODE_UNCONNECTED, - /*PTB15*/ PAL_MODE_UNCONNECTED, /*PTB16*/ PAL_MODE_OUTPUT_PUSHPULL, /*PTB17*/ PAL_MODE_UNCONNECTED, - /*PTB18*/ PAL_MODE_UNCONNECTED, /*PTB19*/ PAL_MODE_UNCONNECTED, /*PTB20*/ PAL_MODE_UNCONNECTED, - /*PTB21*/ PAL_MODE_UNCONNECTED, /*PTB22*/ PAL_MODE_UNCONNECTED, /*PTB23*/ PAL_MODE_UNCONNECTED, - /*PTB24*/ PAL_MODE_UNCONNECTED, /*PTB25*/ PAL_MODE_UNCONNECTED, /*PTB26*/ PAL_MODE_UNCONNECTED, - /*PTB27*/ PAL_MODE_UNCONNECTED, /*PTB28*/ PAL_MODE_UNCONNECTED, /*PTB29*/ PAL_MODE_UNCONNECTED, - /*PTB30*/ PAL_MODE_UNCONNECTED, /*PTB31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT3, // PORTC - .pads = { - /* PTC0*/ PAL_MODE_UNCONNECTED, /* PTC1*/ PAL_MODE_UNCONNECTED, /* PTC2*/ PAL_MODE_UNCONNECTED, - /* PTC3*/ PAL_MODE_UNCONNECTED, /* PTC4*/ PAL_MODE_UNCONNECTED, /* PTC5*/ PAL_MODE_UNCONNECTED, - /* PTC6*/ PAL_MODE_UNCONNECTED, /* PTC7*/ PAL_MODE_UNCONNECTED, /* PTC8*/ PAL_MODE_UNCONNECTED, - /* PTC9*/ PAL_MODE_UNCONNECTED, /*PTC10*/ PAL_MODE_UNCONNECTED, /*PTC11*/ PAL_MODE_UNCONNECTED, - /*PTC12*/ PAL_MODE_UNCONNECTED, /*PTC13*/ PAL_MODE_UNCONNECTED, /*PTC14*/ PAL_MODE_UNCONNECTED, - /*PTC15*/ PAL_MODE_UNCONNECTED, /*PTC16*/ PAL_MODE_UNCONNECTED, /*PTC17*/ PAL_MODE_UNCONNECTED, - /*PTC18*/ PAL_MODE_UNCONNECTED, /*PTC19*/ PAL_MODE_UNCONNECTED, /*PTC20*/ PAL_MODE_UNCONNECTED, - /*PTC21*/ PAL_MODE_UNCONNECTED, /*PTC22*/ PAL_MODE_UNCONNECTED, /*PTC23*/ PAL_MODE_UNCONNECTED, - /*PTC24*/ PAL_MODE_UNCONNECTED, /*PTC25*/ PAL_MODE_UNCONNECTED, /*PTC26*/ PAL_MODE_UNCONNECTED, - /*PTC27*/ PAL_MODE_UNCONNECTED, /*PTC28*/ PAL_MODE_UNCONNECTED, /*PTC29*/ PAL_MODE_UNCONNECTED, - /*PTC30*/ PAL_MODE_UNCONNECTED, /*PTC31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT4, // PORTD - .pads = { - /* PTD0*/ PAL_MODE_UNCONNECTED, /* PTD1*/ PAL_MODE_UNCONNECTED, /* PTD2*/ PAL_MODE_UNCONNECTED, - /* PTD3*/ PAL_MODE_UNCONNECTED, /* PTD4*/ PAL_MODE_UNCONNECTED, /* PTD5*/ PAL_MODE_UNCONNECTED, - /* PTD6*/ PAL_MODE_UNCONNECTED, /* PTD7*/ PAL_MODE_UNCONNECTED, /* PTD8*/ PAL_MODE_UNCONNECTED, - /* PTD9*/ PAL_MODE_UNCONNECTED, /*PTD10*/ PAL_MODE_UNCONNECTED, /*PTD11*/ PAL_MODE_UNCONNECTED, - /*PTD12*/ PAL_MODE_UNCONNECTED, /*PTD13*/ PAL_MODE_UNCONNECTED, /*PTD14*/ PAL_MODE_UNCONNECTED, - /*PTD15*/ PAL_MODE_UNCONNECTED, /*PTD16*/ PAL_MODE_UNCONNECTED, /*PTD17*/ PAL_MODE_UNCONNECTED, - /*PTD18*/ PAL_MODE_UNCONNECTED, /*PTD19*/ PAL_MODE_UNCONNECTED, /*PTD20*/ PAL_MODE_UNCONNECTED, - /*PTD21*/ PAL_MODE_UNCONNECTED, /*PTD22*/ PAL_MODE_UNCONNECTED, /*PTD23*/ PAL_MODE_UNCONNECTED, - /*PTD24*/ PAL_MODE_UNCONNECTED, /*PTD25*/ PAL_MODE_UNCONNECTED, /*PTD26*/ PAL_MODE_UNCONNECTED, - /*PTD27*/ PAL_MODE_UNCONNECTED, /*PTD28*/ PAL_MODE_UNCONNECTED, /*PTD29*/ PAL_MODE_UNCONNECTED, - /*PTD30*/ PAL_MODE_UNCONNECTED, /*PTD31*/ PAL_MODE_UNCONNECTED, - }, - }, - { - .port = IOPORT5, // PORTE - .pads = { - /* PTE0*/ PAL_MODE_UNCONNECTED, /* PTE1*/ PAL_MODE_UNCONNECTED, /* PTE2*/ PAL_MODE_UNCONNECTED, - /* PTE3*/ PAL_MODE_UNCONNECTED, /* PTE4*/ PAL_MODE_UNCONNECTED, /* PTE5*/ PAL_MODE_UNCONNECTED, - /* PTE6*/ PAL_MODE_UNCONNECTED, /* PTE7*/ PAL_MODE_UNCONNECTED, /* PTE8*/ PAL_MODE_UNCONNECTED, - /* PTE9*/ PAL_MODE_UNCONNECTED, /*PTE10*/ PAL_MODE_UNCONNECTED, /*PTE11*/ PAL_MODE_UNCONNECTED, - /*PTE12*/ PAL_MODE_UNCONNECTED, /*PTE13*/ PAL_MODE_UNCONNECTED, /*PTE14*/ PAL_MODE_UNCONNECTED, - /*PTE15*/ PAL_MODE_UNCONNECTED, /*PTE16*/ PAL_MODE_UNCONNECTED, /*PTE17*/ PAL_MODE_UNCONNECTED, - /*PTE18*/ PAL_MODE_UNCONNECTED, /*PTE19*/ PAL_MODE_UNCONNECTED, /*PTE20*/ PAL_MODE_UNCONNECTED, - /*PTE21*/ PAL_MODE_UNCONNECTED, /*PTE22*/ PAL_MODE_UNCONNECTED, /*PTE23*/ PAL_MODE_UNCONNECTED, - /*PTE24*/ PAL_MODE_UNCONNECTED, /*PTE25*/ PAL_MODE_UNCONNECTED, /*PTE26*/ PAL_MODE_UNCONNECTED, - /*PTE27*/ PAL_MODE_UNCONNECTED, /*PTE28*/ PAL_MODE_UNCONNECTED, /*PTE29*/ PAL_MODE_UNCONNECTED, - /*PTE30*/ PAL_MODE_UNCONNECTED, /*PTE31*/ PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - k20x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.h b/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.h deleted file mode 100644 index aad3e27..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for MCHCL K20 board with MX20DX128 processor. - */ - -/* - * Board identifier. - */ -#define BOARD_MCHCK_K20_MX20DX128 -#define BOARD_NAME "MCHCK K20 MX20DX128" - -/* - * MCU type - */ -#define K20x5 - -#define GPIOB_LED 16 - -#define LINE_LED PAL_LINE(GPIOB, GPIOB_LED) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.mk deleted file mode 100644 index 22406ac..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/MCHCK_K20/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/MCHCK_K20/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/MCHCK_K20 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c b/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c deleted file mode 100644 index e6c6080..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return TRUE; -} - -/** - * @brief SDC card write protection detection. - */ -bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return FALSE; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return TRUE; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return FALSE; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h b/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h deleted file mode 100644 index 05aeceb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h +++ /dev/null @@ -1,1160 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for STMicroelectronics STM32F4-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_NAME "NAND and SRAM test board (codename Buod)" - -/* - * Board oscillators-related settings. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 32768 -#endif - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 12000000 -#endif - -/* - * Board voltages. - * Required for performance limits calculation. - */ -#define STM32_VDD 300 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F407xx - -/* - * IO pins assignments. - */ -#define GPIOA_PIN0 0 -#define GPIOA_PIN1 1 -#define GPIOA_PIN2 2 -#define GPIOA_PIN3 3 -#define GPIOA_SPI1_NSS 4 -#define GPIOA_PIN5 5 -#define GPIOA_PIN6 6 -#define GPIOA_PIN7 7 -#define GPIOA_PIN8 8 -#define GPIOA_USB_PRESENT 9 -#define GPIOA_PIN10 10 -#define GPIOA_OTG_FS_DM 11 -#define GPIOA_OTG_FS_DP 12 -#define GPIOA_JTMS 13 -#define GPIOA_JTCK 14 -#define GPIOA_JTDI 15 - - - -#define GPIOA_USB_PRESENT 9 -#define GPIOA_PIN10 10 -#define GPIOA_OTG_FS_DM 11 -#define GPIOA_OTG_FS_DP 12 - - -#define GPIOB_PIN0 0 -#define GPIOB_NAND_WP 1 -#define GPIOB_PIN2 2 -#define GPIOB_JTDO 3 -#define GPIOB_JTRST 4 -#define GPIOB_NVRAM_PWR 5 -#define GPIOB_PIN6 6 -#define GPIOB_PIN7 7 -#define GPIOB_PIN8 8 -#define GPIOB_PIN9 9 -#define GPIOB_PIN10 10 -#define GPIOB_PIN11 11 -#define GPIOB_PIN12 12 -#define GPIOB_PIN13 13 -#define GPIOB_PIN14 14 -#define GPIOB_PIN15 15 - -#define GPIOC_PIN0 0 -#define GPIOC_PIN1 1 -#define GPIOC_PIN2 2 -#define GPIOC_PIN3 3 -#define GPIOC_PIN4 4 -#define GPIOC_PIN5 5 -#define GPIOC_PIN6 6 -#define GPIOC_PIN7 7 -#define GPIOC_PIN8 8 -#define GPIOC_PIN9 9 -#define GPIOC_PIN10 10 -#define GPIOC_PIN11 11 -#define GPIOC_PIN12 12 -#define GPIOC_PIN13 13 -#define GPIOC_PIN14 14 -#define GPIOC_PIN15 15 - -#define GPIOD_MEM_D2 0 -#define GPIOD_MEM_D3 1 -#define GPIOD_PIN2 2 -#define GPIOD_PIN3 3 -#define GPIOD_MEM_OE 4 -#define GPIOD_MEM_WE 5 -#define GPIOD_NAND_RB_NWAIT 6 -#define GPIOD_NAND_CE1 7 -#define GPIOD_MEM_D13 8 -#define GPIOD_MEM_D14 9 -#define GPIOD_MEM_D15 10 -#define GPIOD_MEM_A16 11 -#define GPIOD_MEM_A17 12 -#define GPIOD_PIN13 13 -#define GPIOD_MEM_D0 14 -#define GPIOD_MEM_D1 15 - -#define GPIOE_SRAM_LB 0 -#define GPIOE_SRAM_UB 1 -#define GPIOE_PIN2 2 -#define GPIOE_PIN3 3 -#define GPIOE_PIN4 4 -#define GPIOE_PIN5 5 -#define GPIOE_PIN6 6 -#define GPIOE_MEM_D4 7 -#define GPIOE_MEM_D5 8 -#define GPIOE_MEM_D6 9 -#define GPIOE_MEM_D7 10 -#define GPIOE_MEM_D8 11 -#define GPIOE_MEM_D9 12 -#define GPIOE_MEM_D10 13 -#define GPIOE_MEM_D11 14 -#define GPIOE_MEM_D12 15 - -#define GPIOF_MEM_A0 0 -#define GPIOF_MEM_A1 1 -#define GPIOF_MEM_A2 2 -#define GPIOF_MEM_A3 3 -#define GPIOF_MEM_A4 4 -#define GPIOF_MEM_A5 5 -#define GPIOF_PIN6 6 -#define GPIOF_PIN7 7 -#define GPIOF_PIN8 8 -#define GPIOF_PIN9 9 -#define GPIOF_PIN10 10 -#define GPIOF_PIN11 11 -#define GPIOF_MEM_A6 12 -#define GPIOF_MEM_A7 13 -#define GPIOF_MEM_A8 14 -#define GPIOF_MEM_A9 15 - -#define GPIOG_MEM_A10 0 -#define GPIOG_MEM_A11 1 -#define GPIOG_MEM_A12 2 -#define GPIOG_MEM_A13 3 -#define GPIOG_MEM_A14 4 -#define GPIOG_MEM_A15 5 -#define GPIOG_NAND_RB1 6 -#define GPIOG_NAND_RB2 7 -#define GPIOG_PIN8 8 -#define GPIOG_NAND_CE2 9 -#define GPIOG_PIN10 10 -#define GPIOG_PIN11 11 -#define GPIOG_SRAM_CS1 12 -#define GPIOG_PIN13 13 -#define GPIOG_PIN14 14 -#define GPIOG_PIN15 15 - -#define GPIOH_OSC_IN 0 -#define GPIOH_OSC_OUT 1 -#define GPIOH_PIN2 2 -#define GPIOH_PIN3 3 -#define GPIOH_PIN4 4 -#define GPIOH_PIN5 5 -#define GPIOH_PIN6 6 -#define GPIOH_I2C3_SCL 7 -#define GPIOH_I2C3_SDA 8 -#define GPIOH_PIN9 9 -#define GPIOH_PIN10 10 -#define GPIOH_PIN11 11 -#define GPIOH_PIN12 12 -#define GPIOH_PIN13 13 -#define GPIOH_PIN14 14 -#define GPIOH_PIN15 15 - -#define GPIOI_PIN0 0 -#define GPIOI_PIN1 1 -#define GPIOI_PIN2 2 -#define GPIOI_PIN3 3 -#define GPIOI_PIN4 4 -#define GPIOI_PIN5 5 -#define GPIOI_PIN6 6 -#define GPIOI_PIN7 7 -#define GPIOI_PIN8 8 -#define GPIOI_PIN9 9 -#define GPIOI_LED_R 10 -#define GPIOI_LED_G 11 -#define GPIOI_PIN12 12 -#define GPIOI_PIN13 13 -#define GPIOI_PIN14 14 -#define GPIOI_PIN15 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_2M(n) (0U << ((n) * 2)) -#define PIN_OSPEED_25M(n) (1U << ((n) * 2)) -#define PIN_OSPEED_50M(n) (2U << ((n) * 2)) -#define PIN_OSPEED_100M(n) (3U << ((n) * 2)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2)) -#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4)) - -/* - * GPIOA setup: - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_ALTERNATE(GPIOA_SPI1_NSS) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_USB_PRESENT) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \ - PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \ - PIN_MODE_ALTERNATE(GPIOA_JTMS) | \ - PIN_MODE_ALTERNATE(GPIOA_JTCK) | \ - PIN_MODE_ALTERNATE(GPIOA_JTDI)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SPI1_NSS) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_USB_PRESENT) |\ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \ - PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \ - PIN_OTYPE_PUSHPULL(GPIOA_JTMS) | \ - PIN_OTYPE_PUSHPULL(GPIOA_JTCK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_JTDI)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_100M(GPIOA_PIN0) | \ - PIN_OSPEED_100M(GPIOA_PIN1) | \ - PIN_OSPEED_100M(GPIOA_PIN2) | \ - PIN_OSPEED_100M(GPIOA_PIN3) | \ - PIN_OSPEED_100M(GPIOA_SPI1_NSS) | \ - PIN_OSPEED_100M(GPIOA_PIN5) | \ - PIN_OSPEED_100M(GPIOA_PIN6) | \ - PIN_OSPEED_100M(GPIOA_PIN7) | \ - PIN_OSPEED_100M(GPIOA_PIN8) | \ - PIN_OSPEED_100M(GPIOA_USB_PRESENT) | \ - PIN_OSPEED_100M(GPIOA_PIN10) | \ - PIN_OSPEED_100M(GPIOA_OTG_FS_DM) | \ - PIN_OSPEED_100M(GPIOA_OTG_FS_DP) | \ - PIN_OSPEED_100M(GPIOA_JTMS) | \ - PIN_OSPEED_100M(GPIOA_JTCK) | \ - PIN_OSPEED_100M(GPIOA_JTDI)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN1) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN3) | \ - PIN_PUPDR_FLOATING(GPIOA_SPI1_NSS) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN7) | \ - PIN_PUPDR_FLOATING(GPIOA_PIN8) | \ - PIN_PUPDR_FLOATING(GPIOA_USB_PRESENT) |\ - PIN_PUPDR_FLOATING(GPIOA_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \ - PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \ - PIN_PUPDR_FLOATING(GPIOA_JTMS) | \ - PIN_PUPDR_FLOATING(GPIOA_JTCK) | \ - PIN_PUPDR_FLOATING(GPIOA_JTDI)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_SPI1_NSS) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_USB_PRESENT) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \ - PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \ - PIN_ODR_HIGH(GPIOA_JTMS) | \ - PIN_ODR_HIGH(GPIOA_JTCK) | \ - PIN_ODR_HIGH(GPIOA_JTDI)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0) | \ - PIN_AFIO_AF(GPIOA_SPI1_NSS, 5) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ - PIN_AFIO_AF(GPIOA_USB_PRESENT, 0) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0) | \ - PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \ - PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \ - PIN_AFIO_AF(GPIOA_JTMS, 0) | \ - PIN_AFIO_AF(GPIOA_JTCK, 0) | \ - PIN_AFIO_AF(GPIOA_JTDI, 0)) - -/* - * GPIOB setup: - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_OUTPUT(GPIOB_NAND_WP) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_ALTERNATE(GPIOB_JTDO) | \ - PIN_MODE_ALTERNATE(GPIOB_JTRST) | \ - PIN_MODE_OUTPUT(GPIOB_NVRAM_PWR) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) - -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_NAND_WP) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_JTDO) | \ - PIN_OTYPE_PUSHPULL(GPIOB_JTRST) | \ - PIN_OTYPE_OPENDRAIN(GPIOB_NVRAM_PWR) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_100M(GPIOB_PIN0) | \ - PIN_OSPEED_100M(GPIOB_NAND_WP) | \ - PIN_OSPEED_100M(GPIOB_PIN2) | \ - PIN_OSPEED_100M(GPIOB_JTDO) | \ - PIN_OSPEED_100M(GPIOB_JTRST) | \ - PIN_OSPEED_2M(GPIOB_NVRAM_PWR) | \ - PIN_OSPEED_100M(GPIOB_PIN6) | \ - PIN_OSPEED_100M(GPIOB_PIN7) | \ - PIN_OSPEED_100M(GPIOB_PIN8) | \ - PIN_OSPEED_100M(GPIOB_PIN9) | \ - PIN_OSPEED_100M(GPIOB_PIN10) | \ - PIN_OSPEED_100M(GPIOB_PIN11) | \ - PIN_OSPEED_100M(GPIOB_PIN12) | \ - PIN_OSPEED_100M(GPIOB_PIN13) | \ - PIN_OSPEED_100M(GPIOB_PIN14) | \ - PIN_OSPEED_100M(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_PIN0) | \ - PIN_PUPDR_PULLDOWN(GPIOB_NAND_WP) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOB_JTDO) | \ - PIN_PUPDR_FLOATING(GPIOB_JTRST) | \ - PIN_PUPDR_FLOATING(GPIOB_NVRAM_PWR) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN7) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN8) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN9) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN11) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_LOW(GPIOB_NAND_WP) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_JTDO) | \ - PIN_ODR_HIGH(GPIOB_JTRST) | \ - PIN_ODR_LOW(GPIOB_NVRAM_PWR) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ - PIN_AFIO_AF(GPIOB_NAND_WP, 0) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0) | \ - PIN_AFIO_AF(GPIOB_JTDO, 0) | \ - PIN_AFIO_AF(GPIOB_JTRST, 0) | \ - PIN_AFIO_AF(GPIOB_NVRAM_PWR, 0) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0)) - -/* - * GPIOC setup: - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_INPUT(GPIOC_PIN8) | \ - PIN_MODE_INPUT(GPIOC_PIN9) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_PIN14) | \ - PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_100M(GPIOC_PIN0) |\ - PIN_OSPEED_100M(GPIOC_PIN1) | \ - PIN_OSPEED_100M(GPIOC_PIN2) | \ - PIN_OSPEED_100M(GPIOC_PIN3) | \ - PIN_OSPEED_100M(GPIOC_PIN4) | \ - PIN_OSPEED_100M(GPIOC_PIN5) | \ - PIN_OSPEED_100M(GPIOC_PIN6) | \ - PIN_OSPEED_100M(GPIOC_PIN7) | \ - PIN_OSPEED_100M(GPIOC_PIN8) | \ - PIN_OSPEED_100M(GPIOC_PIN9) | \ - PIN_OSPEED_100M(GPIOC_PIN10) | \ - PIN_OSPEED_100M(GPIOC_PIN11) | \ - PIN_OSPEED_100M(GPIOC_PIN12) | \ - PIN_OSPEED_100M(GPIOC_PIN13) | \ - PIN_OSPEED_100M(GPIOC_PIN14) | \ - PIN_OSPEED_100M(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_PIN0) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN1) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN3) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN4) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN7) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN8) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN9) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN11) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_HIGH(GPIOC_PIN8) | \ - PIN_ODR_HIGH(GPIOC_PIN9) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_PIN14) | \ - PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \ - PIN_AFIO_AF(GPIOC_PIN9, 0) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0) | \ - PIN_AFIO_AF(GPIOC_PIN14, 0) | \ - PIN_AFIO_AF(GPIOC_PIN15, 0)) - -/* - * GPIOD setup: - */ -#define VAL_GPIOD_MODER (PIN_MODE_ALTERNATE(GPIOD_MEM_D2) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_D3) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_OE) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_WE) | \ - PIN_MODE_INPUT(GPIOD_NAND_RB_NWAIT) | \ - PIN_MODE_ALTERNATE(GPIOD_NAND_CE1) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_D13) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_D14) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_D15) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_A16) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_A17) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_D0) | \ - PIN_MODE_ALTERNATE(GPIOD_MEM_D1)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_MEM_D2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_D3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_OE) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_WE) | \ - PIN_OTYPE_PUSHPULL(GPIOD_NAND_RB_NWAIT) |\ - PIN_OTYPE_PUSHPULL(GPIOD_NAND_CE1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_D13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_D14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_D15) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_A16) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_A17) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_D0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_MEM_D1)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_100M(GPIOD_MEM_D2) | \ - PIN_OSPEED_100M(GPIOD_MEM_D3) | \ - PIN_OSPEED_100M(GPIOD_PIN2) | \ - PIN_OSPEED_100M(GPIOD_PIN3) | \ - PIN_OSPEED_100M(GPIOD_MEM_OE) | \ - PIN_OSPEED_100M(GPIOD_MEM_WE) | \ - PIN_OSPEED_100M(GPIOD_NAND_RB_NWAIT) | \ - PIN_OSPEED_100M(GPIOD_NAND_CE1) | \ - PIN_OSPEED_100M(GPIOD_MEM_D13) | \ - PIN_OSPEED_100M(GPIOD_MEM_D14) | \ - PIN_OSPEED_100M(GPIOD_MEM_D15) | \ - PIN_OSPEED_100M(GPIOD_MEM_A16) | \ - PIN_OSPEED_100M(GPIOD_MEM_A17) | \ - PIN_OSPEED_100M(GPIOD_PIN13) | \ - PIN_OSPEED_100M(GPIOD_MEM_D0) | \ - PIN_OSPEED_100M(GPIOD_MEM_D1)) - -#if STM32_NAND_USE_EXT_INT -#define NAND_RB_NWAIT_PUPDR(pin) (PIN_PUPDR_PULLUP(pin)) -#else -#define NAND_RB_NWAIT_PUPDR(pin) (PIN_PUPDR_FLOATING(pin)) -#endif -#define VAL_GPIOD_PUPDR (PIN_PUPDR_FLOATING(GPIOD_MEM_D2) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_D3) | \ - PIN_PUPDR_FLOATING(GPIOD_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOD_PIN3) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_OE) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_WE) | \ - NAND_RB_NWAIT_PUPDR(GPIOD_NAND_RB_NWAIT) | \ - PIN_PUPDR_PULLUP(GPIOD_NAND_CE1) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_D13) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_D14) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_D15) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_A16) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_A17) | \ - PIN_PUPDR_FLOATING(GPIOD_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_D0) | \ - PIN_PUPDR_FLOATING(GPIOD_MEM_D1)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_MEM_D2) | \ - PIN_ODR_HIGH(GPIOD_MEM_D3) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_MEM_OE) | \ - PIN_ODR_HIGH(GPIOD_MEM_WE) | \ - PIN_ODR_HIGH(GPIOD_NAND_RB_NWAIT) | \ - PIN_ODR_HIGH(GPIOD_NAND_CE1) | \ - PIN_ODR_HIGH(GPIOD_MEM_D13) | \ - PIN_ODR_HIGH(GPIOD_MEM_D14) | \ - PIN_ODR_HIGH(GPIOD_MEM_D15) | \ - PIN_ODR_HIGH(GPIOD_MEM_A16) | \ - PIN_ODR_HIGH(GPIOD_MEM_A17) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_MEM_D0) | \ - PIN_ODR_HIGH(GPIOD_MEM_D1)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_MEM_D2, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_D3, 12) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0) | \ - PIN_AFIO_AF(GPIOD_MEM_OE, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_WE, 12) | \ - PIN_AFIO_AF(GPIOD_NAND_RB_NWAIT, 0) | \ - PIN_AFIO_AF(GPIOD_NAND_CE1, 12)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_MEM_D13, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_D14, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_D15, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_A16, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_A17, 12) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0) | \ - PIN_AFIO_AF(GPIOD_MEM_D0, 12) | \ - PIN_AFIO_AF(GPIOD_MEM_D1, 12)) - -/* - * GPIOE setup: - */ -#define VAL_GPIOE_MODER (PIN_MODE_ALTERNATE(GPIOE_SRAM_LB) | \ - PIN_MODE_ALTERNATE(GPIOE_SRAM_UB) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D4) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D5) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D6) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D7) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D8) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D9) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D10) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D11) | \ - PIN_MODE_ALTERNATE(GPIOE_MEM_D12)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_SRAM_LB) | \ - PIN_OTYPE_PUSHPULL(GPIOE_SRAM_UB) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_MEM_D12)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_100M(GPIOE_SRAM_LB) | \ - PIN_OSPEED_100M(GPIOE_SRAM_UB) | \ - PIN_OSPEED_100M(GPIOE_PIN2) | \ - PIN_OSPEED_100M(GPIOE_PIN3) | \ - PIN_OSPEED_100M(GPIOE_PIN4) | \ - PIN_OSPEED_100M(GPIOE_PIN5) | \ - PIN_OSPEED_100M(GPIOE_PIN6) | \ - PIN_OSPEED_100M(GPIOE_MEM_D4) | \ - PIN_OSPEED_100M(GPIOE_MEM_D5) | \ - PIN_OSPEED_100M(GPIOE_MEM_D6) | \ - PIN_OSPEED_100M(GPIOE_MEM_D7) | \ - PIN_OSPEED_100M(GPIOE_MEM_D8) | \ - PIN_OSPEED_100M(GPIOE_MEM_D9) | \ - PIN_OSPEED_100M(GPIOE_MEM_D10) | \ - PIN_OSPEED_100M(GPIOE_MEM_D11) | \ - PIN_OSPEED_100M(GPIOE_MEM_D12)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_FLOATING(GPIOE_SRAM_LB) | \ - PIN_PUPDR_FLOATING(GPIOE_SRAM_UB) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN3) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN4) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOE_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D4) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D5) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D6) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D7) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D8) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D9) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D10) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D11) | \ - PIN_PUPDR_FLOATING(GPIOE_MEM_D12)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_SRAM_LB) | \ - PIN_ODR_HIGH(GPIOE_SRAM_UB) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_MEM_D4) | \ - PIN_ODR_HIGH(GPIOE_MEM_D5) | \ - PIN_ODR_HIGH(GPIOE_MEM_D6) | \ - PIN_ODR_HIGH(GPIOE_MEM_D7) | \ - PIN_ODR_HIGH(GPIOE_MEM_D8) | \ - PIN_ODR_HIGH(GPIOE_MEM_D9) | \ - PIN_ODR_HIGH(GPIOE_MEM_D10) | \ - PIN_ODR_HIGH(GPIOE_MEM_D11) | \ - PIN_ODR_HIGH(GPIOE_MEM_D12)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_SRAM_LB, 12) | \ - PIN_AFIO_AF(GPIOE_SRAM_UB, 12) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0) | \ - PIN_AFIO_AF(GPIOE_MEM_D4, 12)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_MEM_D5, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D6, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D7, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D8, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D9, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D10, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D11, 12) | \ - PIN_AFIO_AF(GPIOE_MEM_D12, 12)) - -/* - * GPIOF setup: - */ -#define VAL_GPIOF_MODER (PIN_MODE_ALTERNATE(GPIOF_MEM_A0) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A1) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A2) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A3) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A4) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A6) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A7) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A8) | \ - PIN_MODE_ALTERNATE(GPIOF_MEM_A9)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_MEM_A0) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A1) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_MEM_A9)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_MEM_A0) | \ - PIN_OSPEED_100M(GPIOF_MEM_A1) | \ - PIN_OSPEED_100M(GPIOF_MEM_A2) | \ - PIN_OSPEED_100M(GPIOF_MEM_A3) | \ - PIN_OSPEED_100M(GPIOF_MEM_A4) | \ - PIN_OSPEED_100M(GPIOF_MEM_A5) | \ - PIN_OSPEED_100M(GPIOF_PIN6) | \ - PIN_OSPEED_100M(GPIOF_PIN7) | \ - PIN_OSPEED_100M(GPIOF_PIN8) | \ - PIN_OSPEED_100M(GPIOF_PIN9) | \ - PIN_OSPEED_100M(GPIOF_PIN10) | \ - PIN_OSPEED_100M(GPIOF_PIN11) | \ - PIN_OSPEED_100M(GPIOF_MEM_A6) | \ - PIN_OSPEED_100M(GPIOF_MEM_A7) | \ - PIN_OSPEED_100M(GPIOF_MEM_A8) | \ - PIN_OSPEED_100M(GPIOF_MEM_A9)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_MEM_A0) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A1) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A2) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A3) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A4) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A5) | \ - PIN_PUPDR_FLOATING(GPIOF_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOF_PIN7) | \ - PIN_PUPDR_FLOATING(GPIOF_PIN8) | \ - PIN_PUPDR_FLOATING(GPIOF_PIN9) | \ - PIN_PUPDR_FLOATING(GPIOF_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOF_PIN11) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A6) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A7) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A8) | \ - PIN_PUPDR_FLOATING(GPIOF_MEM_A9)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_MEM_A0) | \ - PIN_ODR_HIGH(GPIOF_MEM_A1) | \ - PIN_ODR_HIGH(GPIOF_MEM_A2) | \ - PIN_ODR_HIGH(GPIOF_MEM_A3) | \ - PIN_ODR_HIGH(GPIOF_MEM_A4) | \ - PIN_ODR_HIGH(GPIOF_MEM_A5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_MEM_A6) | \ - PIN_ODR_HIGH(GPIOF_MEM_A7) | \ - PIN_ODR_HIGH(GPIOF_MEM_A8) | \ - PIN_ODR_HIGH(GPIOF_MEM_A9)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_MEM_A0, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A1, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A2, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A3, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A4, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A5, 12) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0) | \ - PIN_AFIO_AF(GPIOF_MEM_A6, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A7, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A8, 12) | \ - PIN_AFIO_AF(GPIOF_MEM_A9, 12)) - -/* - * GPIOG setup: - */ -#define VAL_GPIOG_MODER (PIN_MODE_ALTERNATE(GPIOG_MEM_A10) | \ - PIN_MODE_ALTERNATE(GPIOG_MEM_A11) | \ - PIN_MODE_ALTERNATE(GPIOG_MEM_A12) | \ - PIN_MODE_ALTERNATE(GPIOG_MEM_A13) | \ - PIN_MODE_ALTERNATE(GPIOG_MEM_A14) | \ - PIN_MODE_ALTERNATE(GPIOG_MEM_A15) | \ - PIN_MODE_ALTERNATE(GPIOG_NAND_RB1) | \ - PIN_MODE_ALTERNATE(GPIOG_NAND_RB2) | \ - PIN_MODE_INPUT(GPIOG_PIN8) | \ - PIN_MODE_ALTERNATE(GPIOG_NAND_CE2) | \ - PIN_MODE_INPUT(GPIOG_PIN10) | \ - PIN_MODE_INPUT(GPIOG_PIN11) | \ - PIN_MODE_ALTERNATE(GPIOG_SRAM_CS1) | \ - PIN_MODE_INPUT(GPIOG_PIN13) | \ - PIN_MODE_INPUT(GPIOG_PIN14) | \ - PIN_MODE_INPUT(GPIOG_PIN15)) -#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_MEM_A10) | \ - PIN_OTYPE_PUSHPULL(GPIOG_MEM_A11) | \ - PIN_OTYPE_PUSHPULL(GPIOG_MEM_A12) | \ - PIN_OTYPE_PUSHPULL(GPIOG_MEM_A13) | \ - PIN_OTYPE_PUSHPULL(GPIOG_MEM_A14) | \ - PIN_OTYPE_PUSHPULL(GPIOG_MEM_A15) | \ - PIN_OTYPE_PUSHPULL(GPIOG_NAND_RB1) | \ - PIN_OTYPE_PUSHPULL(GPIOG_NAND_RB2) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOG_NAND_CE2) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOG_SRAM_CS1) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) -#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_100M(GPIOG_MEM_A10) | \ - PIN_OSPEED_100M(GPIOG_MEM_A11) | \ - PIN_OSPEED_100M(GPIOG_MEM_A12) | \ - PIN_OSPEED_100M(GPIOG_MEM_A13) | \ - PIN_OSPEED_100M(GPIOG_MEM_A14) | \ - PIN_OSPEED_100M(GPIOG_MEM_A15) | \ - PIN_OSPEED_100M(GPIOG_NAND_RB1) | \ - PIN_OSPEED_100M(GPIOG_NAND_RB2) | \ - PIN_OSPEED_100M(GPIOG_PIN8) | \ - PIN_OSPEED_100M(GPIOG_NAND_CE2) | \ - PIN_OSPEED_100M(GPIOG_PIN10) | \ - PIN_OSPEED_100M(GPIOG_PIN11) | \ - PIN_OSPEED_100M(GPIOG_SRAM_CS1) | \ - PIN_OSPEED_100M(GPIOG_PIN13) | \ - PIN_OSPEED_100M(GPIOG_PIN14) | \ - PIN_OSPEED_100M(GPIOG_PIN15)) - -#if STM32_NAND_USE_EXT_INT -#define NAND_RB1_PUPDR(pin) (PIN_PUPDR_FLOATING(pin)) -#else -#define NAND_RB1_PUPDR(pin) (PIN_PUPDR_PULLUP(pin)) -#endif -#define VAL_GPIOG_PUPDR (PIN_PUPDR_FLOATING(GPIOG_MEM_A10) | \ - PIN_PUPDR_FLOATING(GPIOG_MEM_A11) | \ - PIN_PUPDR_FLOATING(GPIOG_MEM_A12) | \ - PIN_PUPDR_FLOATING(GPIOG_MEM_A13) | \ - PIN_PUPDR_FLOATING(GPIOG_MEM_A14) | \ - PIN_PUPDR_FLOATING(GPIOG_MEM_A15) | \ - NAND_RB1_PUPDR(GPIOG_NAND_RB1) | \ - PIN_PUPDR_FLOATING(GPIOG_NAND_RB2) | \ - PIN_PUPDR_FLOATING(GPIOG_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOG_NAND_CE2) | \ - PIN_PUPDR_FLOATING(GPIOG_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOG_PIN11) | \ - PIN_PUPDR_FLOATING(GPIOG_SRAM_CS1) | \ - PIN_PUPDR_FLOATING(GPIOG_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOG_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOG_PIN15)) -#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_MEM_A10) | \ - PIN_ODR_HIGH(GPIOG_MEM_A11) | \ - PIN_ODR_HIGH(GPIOG_MEM_A12) | \ - PIN_ODR_HIGH(GPIOG_MEM_A13) | \ - PIN_ODR_HIGH(GPIOG_MEM_A14) | \ - PIN_ODR_HIGH(GPIOG_MEM_A15) | \ - PIN_ODR_HIGH(GPIOG_NAND_RB1) | \ - PIN_ODR_HIGH(GPIOG_NAND_RB2) | \ - PIN_ODR_HIGH(GPIOG_PIN8) | \ - PIN_ODR_HIGH(GPIOG_NAND_CE2) | \ - PIN_ODR_HIGH(GPIOG_PIN10) | \ - PIN_ODR_HIGH(GPIOG_PIN11) | \ - PIN_ODR_HIGH(GPIOG_SRAM_CS1) | \ - PIN_ODR_HIGH(GPIOG_PIN13) | \ - PIN_ODR_HIGH(GPIOG_PIN14) | \ - PIN_ODR_HIGH(GPIOG_PIN15)) -#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_MEM_A10, 12) | \ - PIN_AFIO_AF(GPIOG_MEM_A11, 12) | \ - PIN_AFIO_AF(GPIOG_MEM_A12, 12) | \ - PIN_AFIO_AF(GPIOG_MEM_A13, 12) | \ - PIN_AFIO_AF(GPIOG_MEM_A14, 12) | \ - PIN_AFIO_AF(GPIOG_MEM_A15, 12) | \ - PIN_AFIO_AF(GPIOG_NAND_RB1, 12) | \ - PIN_AFIO_AF(GPIOG_NAND_RB2, 12)) -#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \ - PIN_AFIO_AF(GPIOG_NAND_CE2, 12) | \ - PIN_AFIO_AF(GPIOG_PIN10, 0) | \ - PIN_AFIO_AF(GPIOG_PIN11, 0) | \ - PIN_AFIO_AF(GPIOG_SRAM_CS1, 12) | \ - PIN_AFIO_AF(GPIOG_PIN13, 0) | \ - PIN_AFIO_AF(GPIOG_PIN14, 0) | \ - PIN_AFIO_AF(GPIOG_PIN15, 0)) - -/* - * GPIOH setup: - */ -#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \ - PIN_MODE_INPUT(GPIOH_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOH_PIN2) | \ - PIN_MODE_INPUT(GPIOH_PIN3) | \ - PIN_MODE_INPUT(GPIOH_PIN4) | \ - PIN_MODE_INPUT(GPIOH_PIN5) | \ - PIN_MODE_INPUT(GPIOH_PIN6) | \ - PIN_MODE_ALTERNATE(GPIOH_I2C3_SCL) | \ - PIN_MODE_ALTERNATE(GPIOH_I2C3_SDA) | \ - PIN_MODE_INPUT(GPIOH_PIN9) | \ - PIN_MODE_INPUT(GPIOH_PIN10) | \ - PIN_MODE_INPUT(GPIOH_PIN11) | \ - PIN_MODE_INPUT(GPIOH_PIN12) | \ - PIN_MODE_INPUT(GPIOH_PIN13) | \ - PIN_MODE_INPUT(GPIOH_PIN14) | \ - PIN_MODE_INPUT(GPIOH_PIN15)) -#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ - PIN_OTYPE_OPENDRAIN(GPIOH_I2C3_SCL) | \ - PIN_OTYPE_OPENDRAIN(GPIOH_I2C3_SDA) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) -#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_100M(GPIOH_OSC_IN) | \ - PIN_OSPEED_100M(GPIOH_OSC_OUT) | \ - PIN_OSPEED_100M(GPIOH_PIN2) | \ - PIN_OSPEED_100M(GPIOH_PIN3) | \ - PIN_OSPEED_100M(GPIOH_PIN4) | \ - PIN_OSPEED_100M(GPIOH_PIN5) | \ - PIN_OSPEED_100M(GPIOH_PIN6) | \ - PIN_OSPEED_2M(GPIOH_I2C3_SCL) | \ - PIN_OSPEED_2M(GPIOH_I2C3_SDA) | \ - PIN_OSPEED_100M(GPIOH_PIN9) | \ - PIN_OSPEED_100M(GPIOH_PIN10) | \ - PIN_OSPEED_100M(GPIOH_PIN11) | \ - PIN_OSPEED_100M(GPIOH_PIN12) | \ - PIN_OSPEED_100M(GPIOH_PIN13) | \ - PIN_OSPEED_100M(GPIOH_PIN14) | \ - PIN_OSPEED_100M(GPIOH_PIN15)) -#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN3) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN4) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOH_I2C3_SCL) | \ - PIN_PUPDR_FLOATING(GPIOH_I2C3_SDA) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN9) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN10) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN11) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOH_PIN15)) -#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \ - PIN_ODR_HIGH(GPIOH_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOH_PIN2) | \ - PIN_ODR_HIGH(GPIOH_PIN3) | \ - PIN_ODR_HIGH(GPIOH_PIN4) | \ - PIN_ODR_HIGH(GPIOH_PIN5) | \ - PIN_ODR_HIGH(GPIOH_PIN6) | \ - PIN_ODR_HIGH(GPIOH_I2C3_SCL) | \ - PIN_ODR_HIGH(GPIOH_I2C3_SDA) | \ - PIN_ODR_HIGH(GPIOH_PIN9) | \ - PIN_ODR_HIGH(GPIOH_PIN10) | \ - PIN_ODR_HIGH(GPIOH_PIN11) | \ - PIN_ODR_HIGH(GPIOH_PIN12) | \ - PIN_ODR_HIGH(GPIOH_PIN13) | \ - PIN_ODR_HIGH(GPIOH_PIN14) | \ - PIN_ODR_HIGH(GPIOH_PIN15)) -#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0) | \ - PIN_AFIO_AF(GPIOH_OSC_OUT, 0) | \ - PIN_AFIO_AF(GPIOH_PIN2, 0) | \ - PIN_AFIO_AF(GPIOH_PIN3, 0) | \ - PIN_AFIO_AF(GPIOH_PIN4, 0) | \ - PIN_AFIO_AF(GPIOH_PIN5, 0) | \ - PIN_AFIO_AF(GPIOH_PIN6, 0) | \ - PIN_AFIO_AF(GPIOH_I2C3_SCL, 4)) -#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_I2C3_SDA, 4) | \ - PIN_AFIO_AF(GPIOH_PIN9, 0) | \ - PIN_AFIO_AF(GPIOH_PIN10, 0) | \ - PIN_AFIO_AF(GPIOH_PIN11, 0) | \ - PIN_AFIO_AF(GPIOH_PIN12, 0) | \ - PIN_AFIO_AF(GPIOH_PIN13, 0) | \ - PIN_AFIO_AF(GPIOH_PIN14, 0) | \ - PIN_AFIO_AF(GPIOH_PIN15, 0)) - -/* - * GPIOI setup: - */ -#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \ - PIN_MODE_INPUT(GPIOI_PIN1) | \ - PIN_MODE_INPUT(GPIOI_PIN2) | \ - PIN_MODE_INPUT(GPIOI_PIN3) | \ - PIN_MODE_INPUT(GPIOI_PIN4) | \ - PIN_MODE_INPUT(GPIOI_PIN5) | \ - PIN_MODE_INPUT(GPIOI_PIN6) | \ - PIN_MODE_INPUT(GPIOI_PIN7) | \ - PIN_MODE_INPUT(GPIOI_PIN8) | \ - PIN_MODE_INPUT(GPIOI_PIN9) | \ - PIN_MODE_OUTPUT(GPIOI_LED_R) | \ - PIN_MODE_OUTPUT(GPIOI_LED_G) | \ - PIN_MODE_INPUT(GPIOI_PIN12) | \ - PIN_MODE_INPUT(GPIOI_PIN13) | \ - PIN_MODE_INPUT(GPIOI_PIN14) | \ - PIN_MODE_INPUT(GPIOI_PIN15)) -#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOI_LED_R) | \ - PIN_OTYPE_PUSHPULL(GPIOI_LED_G) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) -#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_100M(GPIOI_PIN0) | \ - PIN_OSPEED_100M(GPIOI_PIN1) | \ - PIN_OSPEED_100M(GPIOI_PIN2) | \ - PIN_OSPEED_100M(GPIOI_PIN3) | \ - PIN_OSPEED_100M(GPIOI_PIN4) | \ - PIN_OSPEED_100M(GPIOI_PIN5) | \ - PIN_OSPEED_100M(GPIOI_PIN6) | \ - PIN_OSPEED_100M(GPIOI_PIN7) | \ - PIN_OSPEED_100M(GPIOI_PIN8) | \ - PIN_OSPEED_100M(GPIOI_PIN9) | \ - PIN_OSPEED_100M(GPIOI_LED_R) | \ - PIN_OSPEED_100M(GPIOI_LED_G) | \ - PIN_OSPEED_100M(GPIOI_PIN12) | \ - PIN_OSPEED_100M(GPIOI_PIN13) | \ - PIN_OSPEED_100M(GPIOI_PIN14) | \ - PIN_OSPEED_100M(GPIOI_PIN15)) -#define VAL_GPIOI_PUPDR (PIN_PUPDR_FLOATING(GPIOI_PIN0) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN1) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN3) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN4) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN5) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN6) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN7) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN8) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN9) | \ - PIN_PUPDR_FLOATING(GPIOI_LED_R) | \ - PIN_PUPDR_FLOATING(GPIOI_LED_G) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN12) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN14) | \ - PIN_PUPDR_FLOATING(GPIOI_PIN15)) -#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \ - PIN_ODR_HIGH(GPIOI_PIN1) | \ - PIN_ODR_HIGH(GPIOI_PIN2) | \ - PIN_ODR_HIGH(GPIOI_PIN3) | \ - PIN_ODR_HIGH(GPIOI_PIN4) | \ - PIN_ODR_HIGH(GPIOI_PIN5) | \ - PIN_ODR_HIGH(GPIOI_PIN6) | \ - PIN_ODR_HIGH(GPIOI_PIN7) | \ - PIN_ODR_HIGH(GPIOI_PIN8) | \ - PIN_ODR_HIGH(GPIOI_PIN9) | \ - PIN_ODR_LOW(GPIOI_LED_R) | \ - PIN_ODR_LOW(GPIOI_LED_G) | \ - PIN_ODR_HIGH(GPIOI_PIN12) | \ - PIN_ODR_HIGH(GPIOI_PIN13) | \ - PIN_ODR_HIGH(GPIOI_PIN14) | \ - PIN_ODR_HIGH(GPIOI_PIN15)) -#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0) | \ - PIN_AFIO_AF(GPIOI_PIN1, 0) | \ - PIN_AFIO_AF(GPIOI_PIN2, 0) | \ - PIN_AFIO_AF(GPIOI_PIN3, 0) | \ - PIN_AFIO_AF(GPIOI_PIN4, 0) | \ - PIN_AFIO_AF(GPIOI_PIN5, 0) | \ - PIN_AFIO_AF(GPIOI_PIN6, 0) | \ - PIN_AFIO_AF(GPIOI_PIN7, 0)) -#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0) | \ - PIN_AFIO_AF(GPIOI_PIN9, 0) | \ - PIN_AFIO_AF(GPIOI_LED_R, 0) | \ - PIN_AFIO_AF(GPIOI_LED_G, 0) | \ - PIN_AFIO_AF(GPIOI_PIN12, 0) | \ - PIN_AFIO_AF(GPIOI_PIN13, 0) | \ - PIN_AFIO_AF(GPIOI_PIN14, 0) | \ - PIN_AFIO_AF(GPIOI_PIN15, 0)) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk deleted file mode 100644 index 8c28257..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(CHIBIOS_CONTRIB)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c - -# Required include directories -BOARDINC = $(CHIBIOS_CONTRIB)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.c b/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.c deleted file mode 100644 index c5237d7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - 2016 Stéphane D'Alu / Bruno Remond - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/* RAM Banks - * (Values are defined in Nordic gcc_startup_nrf51.s) - */ -#define NRF_POWER_RAMON_ADDRESS 0x40000524 -#define NRF_POWER_RAMONB_ADDRESS 0x40000554 -#define NRF_POWER_RAMONx_RAMxON_ONMODE_Msk 0x3 - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .pads = { - PAL_MODE_UNCONNECTED, /* P0.0 */ - PAL_MODE_UNCONNECTED, /* P0.1 */ - PAL_MODE_UNCONNECTED, /* P0.2 */ - PAL_MODE_UNCONNECTED, /* P0.3 */ - PAL_MODE_UNCONNECTED, /* P0.4 */ - PAL_MODE_UNCONNECTED, /* P0.5 */ - PAL_MODE_UNCONNECTED, /* P0.6 */ - PAL_MODE_OUTPUT_OPENDRAIN, /* P0.7 : SCL */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.8 : UART_RTS */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.9 : UART_TX */ - PAL_MODE_INPUT_PULLUP, /* P0.10: UART_CTS */ - PAL_MODE_INPUT_PULLUP, /* P0.11: UART_RX */ - PAL_MODE_UNCONNECTED, /* P0.12 */ - PAL_MODE_UNCONNECTED, /* P0.13 */ - PAL_MODE_UNCONNECTED, /* P0.14 */ - PAL_MODE_UNCONNECTED, /* P0.15 */ - PAL_MODE_UNCONNECTED, /* P0.16 */ - PAL_MODE_INPUT_PULLUP, /* P0.17: BTN1 */ - PAL_MODE_INPUT_PULLUP, /* P0.18: BTN2 */ - PAL_MODE_INPUT_PULLUP, /* P0.19: BTN3 */ - PAL_MODE_INPUT_PULLUP, /* P0.20: BTN4 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.21: LED1 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.22: LED2 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.23: LED3 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.24: LED4 | SPI_SEL */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.25: SPI_MOSI */ - PAL_MODE_UNCONNECTED, /* P0.26: XTAL (32MHz) */ - PAL_MODE_UNCONNECTED, /* P0.27: XTAL (32MHz) */ - PAL_MODE_INPUT_PULLUP, /* P0.28: SPI_MISO */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.29: SPI_SCK */ - PAL_MODE_OUTPUT_OPENDRAIN, /* P0.30: SDA */ - PAL_MODE_UNCONNECTED, /* P0.31 */ - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization is performed just after reset before BSS and - * DATA segments initialization. - */ -void __early_init(void) -{ - /* Make sure ALL RAM banks are powered on */ - *(uint32_t *)NRF_POWER_RAMON_ADDRESS |= NRF_POWER_RAMONx_RAMxON_ONMODE_Msk; - *(uint32_t *)NRF_POWER_RAMONB_ADDRESS |= NRF_POWER_RAMONx_RAMxON_ONMODE_Msk; -} - -/** - * @brief Late initialization code. - * @note This initialization is performed after BSS and DATA segments - * initialization and before invoking the main() function. - */ -void boardInit(void) -{ -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.h b/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.h deleted file mode 100644 index 67e1724..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* Board identifier. */ -#define BOARD_NRF51_DK -#define BOARD_NAME "nRF51 DK" - -/* Board oscillators-related settings. */ -#define NRF51_XTAL_VALUE 16000000 -#define NRF51_LFCLK_SOURCE 1 - -/* GPIO pins. */ -#define BTN1 17 -#define BTN2 18 -#define BTN3 19 -#define BTN4 20 -#define LED1 21 -#define LED2 22 -#define LED3 23 -#define LED4 24 -#define UART_RTS 8 -#define UART_TX 9 -#define UART_CTS 10 -#define UART_RX 11 -#define SPI_SCK 29 -#define SPI_MOSI 25 -#define SPI_MISO 28 -#define SPI_SS 24 -#define I2C_SCL 7 -#define I2C_SDA 30 -#define AIN0 26 -#define AIN1 27 -#define AIN2 1 -#define AIN3 2 -#define AIN4 3 -#define AIN5 4 -#define AIN6 5 -#define AIN7 6 -#define AREF0 0 -#define AREF1 6 - -/* - * IO pins assignments. - */ -#define IOPORT1_BTN1 17U -#define IOPORT1_BTN2 18U -#define IOPORT1_BTN3 19U -#define IOPORT1_BTN4 20U -#define IOPORT1_LED1 21U -#define IOPORT1_LED2 22U -#define IOPORT1_LED3 23U -#define IOPORT1_LED4 24U -#define IOPORT1_UART_RTS 8U -#define IOPORT1_UART_TX 9U -#define IOPORT1_UART_CTS 10U -#define IOPORT1_UART_RX 11U -#define IOPORT1_SPI_SCK 29U -#define IOPORT1_SPI_MOSI 25U -#define IOPORT1_SPI_MISO 28U -#define IOPORT1_SPI_SS 24U -#define IOPORT1_I2C_SCL 7U -#define IOPORT1_I2C_SDA 30U -#define IOPORT1_A0 1U -#define IOPORT1_A1 2U -#define IOPORT1_A2 3U -#define IOPORT1_A3 4U -#define IOPORT1_A4 5U -#define IOPORT1_A5 6U -#define IOPORT1_AIN0 26U -#define IOPORT1_AIN1 27U -#define IOPORT1_AIN2 1U -#define IOPORT1_AIN3 2U -#define IOPORT1_AIN4 3U -#define IOPORT1_AIN5 4U -#define IOPORT1_AIN6 5U -#define IOPORT1_AIN7 6U -#define IOPORT1_AREF0 0U -#define IOPORT1_AREF1 6U - -/* - * IO lines assignments. - */ -#define LINE_BTN1 PAL_LINE(IOPORT1, IOPORT1_BTN1) -#define LINE_BTN2 PAL_LINE(IOPORT1, IOPORT1_BTN2) -#define LINE_BTN3 PAL_LINE(IOPORT1, IOPORT1_BTN3) -#define LINE_BTN4 PAL_LINE(IOPORT1, IOPORT1_BTN4) -#define LINE_LED1 PAL_LINE(IOPORT1, IOPORT1_LED1) -#define LINE_LED2 PAL_LINE(IOPORT1, IOPORT1_LED2) -#define LINE_LED3 PAL_LINE(IOPORT1, IOPORT1_LED3) -#define LINE_LED4 PAL_LINE(IOPORT1, IOPORT1_LED4) -#define LINE_UART_RTS PAL_LINE(IOPORT1, IOPORT1_UART_RTS) -#define LINE_UART_TX PAL_LINE(IOPORT1, IOPORT1_UART_TX) -#define LINE_UART_CTS PAL_LINE(IOPORT1, IOPORT1_UART_CTS) -#define LINE_UART_RX PAL_LINE(IOPORT1, IOPORT1_UART_RX) -#define LINE_SPI_SCK PAL_LINE(IOPORT1, IOPORT1_SPI_SCK) -#define LINE_SPI_MOSI PAL_LINE(IOPORT1, IOPORT1_SPI_MOSI) -#define LINE_SPI_MISO PAL_LINE(IOPORT1, IOPORT1_SPI_MISO) -#define LINE_SPI_SS PAL_LINE(IOPORT1, IOPORT1_SPI_SS) -#define LINE_I2C_SCL PAL_LINE(IOPORT1, IOPORT1_I2C_SCL) -#define LINE_I2C_SDA PAL_LINE(IOPORT1, IOPORT1_I2C_SDA) -#define LINE_A0 PAL_LINE(IOPORT1, IOPORT1_A0) -#define LINE_A1 PAL_LINE(IOPORT1, IOPORT1_A1) -#define LINE_A2 PAL_LINE(IOPORT1, IOPORT1_A2) -#define LINE_A3 PAL_LINE(IOPORT1, IOPORT1_A3) -#define LINE_A4 PAL_LINE(IOPORT1, IOPORT1_A4) -#define LINE_A5 PAL_LINE(IOPORT1, IOPORT1_A5) -#define LINE_AIN0 PAL_LINE(IOPORT1, IOPORT1_AIN0) -#define LINE_AIN1 PAL_LINE(IOPORT1, IOPORT1_AIN1) -#define LINE_AIN2 PAL_LINE(IOPORT1, IOPORT1_AIN2) -#define LINE_AIN3 PAL_LINE(IOPORT1, IOPORT1_AIN3) -#define LINE_AIN4 PAL_LINE(IOPORT1, IOPORT1_AIN4) -#define LINE_AIN5 PAL_LINE(IOPORT1, IOPORT1_AIN5) -#define LINE_AIN6 PAL_LINE(IOPORT1, IOPORT1_AIN6) -#define LINE_AIN7 PAL_LINE(IOPORT1, IOPORT1_AIN7) -#define LINE_AREF0 PAL_LINE(IOPORT1, IOPORT1_AREF0) -#define LINE_AREF1 PAL_LINE(IOPORT1, IOPORT1_AREF1) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.mk deleted file mode 100644 index 9619bd4..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/NRF51-DK/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/NRF51-DK/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/NRF51-DK - -# Flash -JLINK_DEVICE = nrf51422 -JLINK_PRE_FLASH = w4 4001e504 1 -JLINK_ERASE_ALL = w4 4001e504 2\nw4 4001e50c 1\nsleep 100 - diff --git a/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.c b/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.c deleted file mode 100644 index 85e4486..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - Copyright (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, /* P0.0: PIN11 (AREF0) */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.1: PIN9 (AIN2) */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.2: PIN10 (AIN3) */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.3: LED_BLUE */ - PAL_MODE_UNCONNECTED, /* P0.4 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.5: LED_GREEN */ - PAL_MODE_UNCONNECTED, /* P0.6 */ - PAL_MODE_UNCONNECTED, /* P0.7 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.8: LED_RED */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.9: PIN7 */ - PAL_MODE_UNCONNECTED, /* P0.10 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.11: PIN6 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.12: PIN5 */ - PAL_MODE_UNCONNECTED, /* P0.13 */ - PAL_MODE_UNCONNECTED, /* P0.14 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.15: PIN4 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.16: PIN3 */ - PAL_MODE_UNCONNECTED, /* P0.17 */ - PAL_MODE_INPUT_PULLUP, /* P0.18: PIN2 (RX) */ - PAL_MODE_UNCONNECTED, /* P0.19 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.20: PIN1 (TX) */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.21: PIN15 */ - PAL_MODE_UNCONNECTED, /* P0.22 */ - PAL_MODE_UNCONNECTED, /* P0.23 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.24: PIN14 */ - PAL_MODE_UNCONNECTED, /* P0.25 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.26: PIN13 (LFXTL) (AIN0) */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.27: PIN12 (LFXTL) (AIN1) */ - PAL_MODE_UNCONNECTED, /* P0.28 */ - PAL_MODE_UNCONNECTED, /* P0.29 */ - PAL_MODE_UNCONNECTED, /* P0.30 */ - PAL_MODE_UNCONNECTED, /* P0.31 */ - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization is performed just after reset before BSS and - * DATA segments initialization. - */ -void __early_init(void) -{ -} - -/** - * @brief Late initialization code. - * @note This initialization is performed after BSS and DATA segments - * initialization and before invoking the main() function. - */ -void boardInit(void) -{ -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.h b/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.h deleted file mode 100644 index e3bbb0b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - Copyright (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* Board identifier. */ -#define BOARD_OSHCHIP_V10 -#define BOARD_NAME "OSHChip_V1.0" - -/* Board oscillators-related settings. */ -#define NRF51_XTAL_VALUE 16000000 - -/* Non-header GPIO pins. */ -#define LED_RED 8 -#define LED_GREEN 5 -#define LED_BLUE 3 - -/* Common peripheral GPIO pins. */ -#define UART_TX 20 -#define UART_RX 18 - -/* GPIO on DIP pins. */ -#define OSHCHIP_PIN1 20 -#define OSHCHIP_PIN2 18 -#define OSHCHIP_PIN3 16 -#define OSHCHIP_PIN4 15 -#define OSHCHIP_PIN5 12 -#define OSHCHIP_PIN6 11 -#define OSHCHIP_PIN7 9 -/* Pin 8 is GND */ -#define OSHCHIP_PIN9 1 -#define OSHCHIP_PIN10 2 -#define OSHCHIP_PIN11 0 -#define OSHCHIP_PIN12 27 -#define OSHCHIP_PIN13 26 -#define OSHCHIP_PIN14 24 -#define OSHCHIP_PIN15 21 -/* Pin 16 is VCC */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.mk deleted file mode 100644 index 08afdbd..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/OSHCHIP_V1.0/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/OSHCHIP_V1.0/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/OSHCHIP_V1.0 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.c b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.c deleted file mode 100644 index f89c7e5..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - /* - * PORTA setup. - * - * PTA4 - PIN33 - * PTA5 - PIN24 - * PTA12 - PIN3 - * PTA13 - PIN4 - * - * PTA18/19 crystal - * PTA0/3 SWD - */ - .port = IOPORT1, - .pads = { - PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTB setup. - * - * PTB0 - PIN16 - * PTB1 - PIN17 - * PTB2 - PIN19 - * PTB3 - PIN18 - * PTB16 - PIN0 - UART0_TX - * PTB17 - PIN1 - UART0_RX - * PTB18 - PIN32 - * PTB19 - PIN25 - */ - .port = IOPORT2, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTC setup. - * - * PTC0 - PIN15 - * PTC1 - PIN22 - * PTC2 - PIN23 - * PTC3 - PIN9 - * PTC4 - PIN10 - * PTC5 - PIN13 - * PTC6 - PIN11 - * PTC7 - PIN12 - * PTC8 - PIN28 - * PTC9 - PIN27 - * PTC10 - PIN29 - * PTC11 - PIN30 - */ - .port = IOPORT3, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTD setup. - * - * PTD0 - PIN2 - * PTD1 - PIN14 - * PTD2 - PIN7 - * PTD3 - PIN8 - * PTD4 - PIN6 - * PTD5 - PIN20 - * PTD6 - PIN21 - * PTD7 - PIN5 - */ - .port = IOPORT4, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTE setup. - * - * PTE0 - PIN31 - * PTE1 - PIN26 - */ - .port = IOPORT5, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - k20x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.h b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.h deleted file mode 100644 index f3e7383..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the PJRC Teensy 3.0 board. - */ - -/* - * Board identifier. - */ -#define BOARD_PJRC_TEENSY_3 -#define BOARD_NAME "PJRC Teensy 3.0" - -/* External 16 MHz crystal */ -#define KINETIS_XTAL_FREQUENCY 16000000UL - -/* Use internal capacitors for the crystal */ -#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P - -/* - * MCU type - */ -#define K20x5 - -/* - * IO pins assignments. - */ -#define PORTA_PIN0 0 -#define PORTA_PIN1 1 -#define PORTA_PIN2 2 -#define PORTA_PIN3 3 -#define TEENSY_PIN33 4 -#define TEENSY_PIN24 5 -#define PORTA_PIN6 6 -#define PORTA_PIN7 7 -#define PORTA_PIN8 8 -#define PORTA_PIN9 9 -#define PORTA_PIN10 10 -#define PORTA_PIN11 11 -#define TEENSY_PIN3 12 -#define TEENSY_PIN4 13 -#define PORTA_PIN14 14 -#define PORTA_PIN15 15 -#define PORTA_PIN16 16 -#define PORTA_PIN17 17 -#define PORTA_PIN18 18 -#define PORTA_PIN19 19 -#define PORTA_PIN20 20 -#define PORTA_PIN21 21 -#define PORTA_PIN22 22 -#define PORTA_PIN23 23 -#define PORTA_PIN24 24 -#define PORTA_PIN25 25 -#define PORTA_PIN26 26 -#define PORTA_PIN27 27 -#define PORTA_PIN28 28 -#define PORTA_PIN29 29 -#define PORTA_PIN30 30 -#define PORTA_PIN31 31 - -#define TEENSY_PIN3_IOPORT IOPORT1 -#define TEENSY_PIN4_IOPORT IOPORT1 -#define TEENSY_PIN24_IOPORT IOPORT1 -#define TEENSY_PIN33_IOPORT IOPORT1 - -#define TEENSY_PIN16 0 -#define TEENSY_PIN17 1 -#define TEENSY_PIN19 2 -#define TEENSY_PIN18 3 -#define PORTB_PIN4 4 -#define PORTB_PIN5 5 -#define PORTB_PIN6 6 -#define PORTB_PIN7 7 -#define PORTB_PIN8 8 -#define PORTB_PIN9 9 -#define PORTB_PIN10 10 -#define PORTB_PIN11 11 -#define PORTB_PIN12 12 -#define PORTB_PIN13 13 -#define PORTB_PIN14 14 -#define PORTB_PIN15 15 -#define TEENSY_PIN0 16 -#define TEENSY_PIN1 17 -#define TEENSY_PIN32 18 -#define TEENSY_PIN25 19 -#define PORTB_PIN20 20 -#define PORTB_PIN21 21 -#define PORTB_PIN22 22 -#define PORTB_PIN23 23 -#define PORTB_PIN24 24 -#define PORTB_PIN25 25 -#define PORTB_PIN26 26 -#define PORTB_PIN27 27 -#define PORTB_PIN28 28 -#define PORTB_PIN29 29 -#define PORTB_PIN30 30 -#define PORTB_PIN31 31 - -#define TEENSY_PIN0_IOPORT IOPORT2 -#define TEENSY_PIN1_IOPORT IOPORT2 -#define TEENSY_PIN16_IOPORT IOPORT2 -#define TEENSY_PIN17_IOPORT IOPORT2 -#define TEENSY_PIN18_IOPORT IOPORT2 -#define TEENSY_PIN19_IOPORT IOPORT2 -#define TEENSY_PIN25_IOPORT IOPORT2 -#define TEENSY_PIN32_IOPORT IOPORT2 - -#define TEENSY_PIN15 0 -#define TEENSY_PIN22 1 -#define TEENSY_PIN23 2 -#define TEENSY_PIN9 3 -#define TEENSY_PIN10 4 -#define TEENSY_PIN13 5 -#define TEENSY_PIN11 6 -#define TEENSY_PIN12 7 -#define TEENSY_PIN28 8 -#define TEENSY_PIN27 9 -#define TEENSY_PIN29 10 -#define TEENSY_PIN30 11 -#define PORTC_PIN12 12 -#define PORTC_PIN13 13 -#define PORTC_PIN14 14 -#define PORTC_PIN15 15 -#define PORTC_PIN16 16 -#define PORTC_PIN17 17 -#define PORTC_PIN18 18 -#define PORTC_PIN19 19 -#define PORTC_PIN20 20 -#define PORTC_PIN21 21 -#define PORTC_PIN22 22 -#define PORTC_PIN23 23 -#define PORTC_PIN24 24 -#define PORTC_PIN25 25 -#define PORTC_PIN26 26 -#define PORTC_PIN27 27 -#define PORTC_PIN28 28 -#define PORTC_PIN29 29 -#define PORTC_PIN30 30 -#define PORTC_PIN31 31 - -#define TEENSY_PIN9_IOPORT IOPORT3 -#define TEENSY_PIN10_IOPORT IOPORT3 -#define TEENSY_PIN11_IOPORT IOPORT3 -#define TEENSY_PIN12_IOPORT IOPORT3 -#define TEENSY_PIN13_IOPORT IOPORT3 -#define TEENSY_PIN15_IOPORT IOPORT3 -#define TEENSY_PIN22_IOPORT IOPORT3 -#define TEENSY_PIN23_IOPORT IOPORT3 -#define TEENSY_PIN27_IOPORT IOPORT3 -#define TEENSY_PIN28_IOPORT IOPORT3 -#define TEENSY_PIN29_IOPORT IOPORT3 -#define TEENSY_PIN30_IOPORT IOPORT3 - -#define TEENSY_PIN2 0 -#define TEENSY_PIN14 1 -#define TEENSY_PIN7 2 -#define TEENSY_PIN8 3 -#define TEENSY_PIN6 4 -#define TEENSY_PIN20 5 -#define TEENSY_PIN21 6 -#define TEENSY_PIN5 7 -#define PORTD_PIN8 8 -#define PORTD_PIN9 9 -#define PORTD_PIN10 10 -#define PORTD_PIN11 11 -#define PORTD_PIN12 12 -#define PORTD_PIN13 13 -#define PORTD_PIN14 14 -#define PORTD_PIN15 15 -#define PORTD_PIN16 16 -#define PORTD_PIN17 17 -#define PORTD_PIN18 18 -#define PORTD_PIN19 19 -#define PORTD_PIN20 20 -#define PORTD_PIN21 21 -#define PORTD_PIN22 22 -#define PORTD_PIN23 23 -#define PORTD_PIN24 24 -#define PORTD_PIN25 25 -#define PORTD_PIN26 26 -#define PORTD_PIN27 27 -#define PORTD_PIN28 28 -#define PORTD_PIN29 29 -#define PORTD_PIN30 30 -#define PORTD_PIN31 31 - -#define TEENSY_PIN2_IOPORT IOPORT4 -#define TEENSY_PIN5_IOPORT IOPORT4 -#define TEENSY_PIN6_IOPORT IOPORT4 -#define TEENSY_PIN7_IOPORT IOPORT4 -#define TEENSY_PIN8_IOPORT IOPORT4 -#define TEENSY_PIN14_IOPORT IOPORT4 -#define TEENSY_PIN20_IOPORT IOPORT4 -#define TEENSY_PIN21_IOPORT IOPORT4 - -#define TEENSY_PIN31 0 -#define TEENSY_PIN26 1 -#define PORTE_PIN2 2 -#define PORTE_PIN3 3 -#define PORTE_PIN4 4 -#define PORTE_PIN5 5 -#define PORTE_PIN6 6 -#define PORTE_PIN7 7 -#define PORTE_PIN8 8 -#define PORTE_PIN9 9 -#define PORTE_PIN10 10 -#define PORTE_PIN11 11 -#define PORTE_PIN12 12 -#define PORTE_PIN13 13 -#define PORTE_PIN14 14 -#define PORTE_PIN15 15 -#define PORTE_PIN16 16 -#define PORTE_PIN17 17 -#define PORTE_PIN18 18 -#define PORTE_PIN19 19 -#define PORTE_PIN20 20 -#define PORTE_PIN21 21 -#define PORTE_PIN22 22 -#define PORTE_PIN23 23 -#define PORTE_PIN24 24 -#define PORTE_PIN25 25 -#define PORTE_PIN26 26 -#define PORTE_PIN27 27 -#define PORTE_PIN28 28 -#define PORTE_PIN29 29 -#define PORTE_PIN30 30 -#define PORTE_PIN31 31 - -#define TEENSY_PIN26_IOPORT IOPORT5 -#define TEENSY_PIN31_IOPORT IOPORT5 - -#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1) -#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2) -#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3) -#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4) -#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5) -#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6) -#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7) -#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8) -#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9) -#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10) -#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11) -#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12) -#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13) -#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14) -#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15) -#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16) -#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17) -#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18) -#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19) -#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20) -#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21) -#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22) -#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23) -#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) -#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26) -#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27) -#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28) -#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29) -#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30) -#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31) -#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32) -#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33) - -#define LINE_LED LINE_PIN13 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.mk deleted file mode 100644 index b9dcdc8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/PJRC_TEENSY_3/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/PJRC_TEENSY_3 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.c b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.c deleted file mode 100644 index d60a89c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - /* - * PORTA setup. - * - * PTA4 - PIN33 - * PTA5 - PIN24 - * PTA12 - PIN3 - * PTA13 - PIN4 - * - * PTA18/19 crystal - * PTA0/3 SWD - */ - .port = IOPORT1, - .pads = { - PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTB setup. - * - * PTB0 - PIN16 - * PTB1 - PIN17 - * PTB2 - PIN19 - * PTB3 - PIN18 - * PTB16 - PIN0 - UART0_TX - * PTB17 - PIN1 - UART0_RX - * PTB18 - PIN32 - * PTB19 - PIN25 - */ - .port = IOPORT2, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTC setup. - * - * PTC0 - PIN15 - * PTC1 - PIN22 - * PTC2 - PIN23 - * PTC3 - PIN9 - * PTC4 - PIN10 - * PTC5 - PIN13 - * PTC6 - PIN11 - * PTC7 - PIN12 - * PTC8 - PIN28 - * PTC9 - PIN27 - * PTC10 - PIN29 - * PTC11 - PIN30 - */ - .port = IOPORT3, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTD setup. - * - * PTD0 - PIN2 - * PTD1 - PIN14 - * PTD2 - PIN7 - * PTD3 - PIN8 - * PTD4 - PIN6 - * PTD5 - PIN20 - * PTD6 - PIN21 - * PTD7 - PIN5 - */ - .port = IOPORT4, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTE setup. - * - * PTE0 - PIN31 - * PTE1 - PIN26 - */ - .port = IOPORT5, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - k20x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.h b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.h deleted file mode 100644 index 76a52b7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the PJRC Teensy 3.1 board. - */ - -/* - * Board identifier. - */ -#define BOARD_PJRC_TEENSY_3_1 -#define BOARD_NAME "PJRC Teensy 3.1" - -/* External 16 MHz crystal */ -#define KINETIS_XTAL_FREQUENCY 16000000UL - -/* Use internal capacitors for the crystal */ -#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P - -/* - * MCU type - */ -#define K20x7 - -/* - * IO pins assignments. - */ -#define PORTA_PIN0 0 -#define PORTA_PIN1 1 -#define PORTA_PIN2 2 -#define PORTA_PIN3 3 -#define TEENSY_PIN33 4 -#define TEENSY_PIN24 5 -#define PORTA_PIN6 6 -#define PORTA_PIN7 7 -#define PORTA_PIN8 8 -#define PORTA_PIN9 9 -#define PORTA_PIN10 10 -#define PORTA_PIN11 11 -#define TEENSY_PIN3 12 -#define TEENSY_PIN4 13 -#define PORTA_PIN14 14 -#define PORTA_PIN15 15 -#define PORTA_PIN16 16 -#define PORTA_PIN17 17 -#define PORTA_PIN18 18 -#define PORTA_PIN19 19 -#define PORTA_PIN20 20 -#define PORTA_PIN21 21 -#define PORTA_PIN22 22 -#define PORTA_PIN23 23 -#define PORTA_PIN24 24 -#define PORTA_PIN25 25 -#define PORTA_PIN26 26 -#define PORTA_PIN27 27 -#define PORTA_PIN28 28 -#define PORTA_PIN29 29 -#define PORTA_PIN30 30 -#define PORTA_PIN31 31 - -#define TEENSY_PIN3_IOPORT IOPORT1 -#define TEENSY_PIN4_IOPORT IOPORT1 -#define TEENSY_PIN24_IOPORT IOPORT1 -#define TEENSY_PIN33_IOPORT IOPORT1 - -#define TEENSY_PIN16 0 -#define TEENSY_PIN17 1 -#define TEENSY_PIN19 2 -#define TEENSY_PIN18 3 -#define PORTB_PIN4 4 -#define PORTB_PIN5 5 -#define PORTB_PIN6 6 -#define PORTB_PIN7 7 -#define PORTB_PIN8 8 -#define PORTB_PIN9 9 -#define PORTB_PIN10 10 -#define PORTB_PIN11 11 -#define PORTB_PIN12 12 -#define PORTB_PIN13 13 -#define PORTB_PIN14 14 -#define PORTB_PIN15 15 -#define TEENSY_PIN0 16 -#define TEENSY_PIN1 17 -#define TEENSY_PIN32 18 -#define TEENSY_PIN25 19 -#define PORTB_PIN20 20 -#define PORTB_PIN21 21 -#define PORTB_PIN22 22 -#define PORTB_PIN23 23 -#define PORTB_PIN24 24 -#define PORTB_PIN25 25 -#define PORTB_PIN26 26 -#define PORTB_PIN27 27 -#define PORTB_PIN28 28 -#define PORTB_PIN29 29 -#define PORTB_PIN30 30 -#define PORTB_PIN31 31 - -#define TEENSY_PIN0_IOPORT IOPORT2 -#define TEENSY_PIN1_IOPORT IOPORT2 -#define TEENSY_PIN16_IOPORT IOPORT2 -#define TEENSY_PIN17_IOPORT IOPORT2 -#define TEENSY_PIN18_IOPORT IOPORT2 -#define TEENSY_PIN19_IOPORT IOPORT2 -#define TEENSY_PIN25_IOPORT IOPORT2 -#define TEENSY_PIN32_IOPORT IOPORT2 - -#define TEENSY_PIN15 0 -#define TEENSY_PIN22 1 -#define TEENSY_PIN23 2 -#define TEENSY_PIN9 3 -#define TEENSY_PIN10 4 -#define TEENSY_PIN13 5 -#define TEENSY_PIN11 6 -#define TEENSY_PIN12 7 -#define TEENSY_PIN28 8 -#define TEENSY_PIN27 9 -#define TEENSY_PIN29 10 -#define TEENSY_PIN30 11 -#define PORTC_PIN12 12 -#define PORTC_PIN13 13 -#define PORTC_PIN14 14 -#define PORTC_PIN15 15 -#define PORTC_PIN16 16 -#define PORTC_PIN17 17 -#define PORTC_PIN18 18 -#define PORTC_PIN19 19 -#define PORTC_PIN20 20 -#define PORTC_PIN21 21 -#define PORTC_PIN22 22 -#define PORTC_PIN23 23 -#define PORTC_PIN24 24 -#define PORTC_PIN25 25 -#define PORTC_PIN26 26 -#define PORTC_PIN27 27 -#define PORTC_PIN28 28 -#define PORTC_PIN29 29 -#define PORTC_PIN30 30 -#define PORTC_PIN31 31 - -#define TEENSY_PIN9_IOPORT IOPORT3 -#define TEENSY_PIN10_IOPORT IOPORT3 -#define TEENSY_PIN11_IOPORT IOPORT3 -#define TEENSY_PIN12_IOPORT IOPORT3 -#define TEENSY_PIN13_IOPORT IOPORT3 -#define TEENSY_PIN15_IOPORT IOPORT3 -#define TEENSY_PIN22_IOPORT IOPORT3 -#define TEENSY_PIN23_IOPORT IOPORT3 -#define TEENSY_PIN27_IOPORT IOPORT3 -#define TEENSY_PIN28_IOPORT IOPORT3 -#define TEENSY_PIN29_IOPORT IOPORT3 -#define TEENSY_PIN30_IOPORT IOPORT3 - -#define TEENSY_PIN2 0 -#define TEENSY_PIN14 1 -#define TEENSY_PIN7 2 -#define TEENSY_PIN8 3 -#define TEENSY_PIN6 4 -#define TEENSY_PIN20 5 -#define TEENSY_PIN21 6 -#define TEENSY_PIN5 7 -#define PORTD_PIN8 8 -#define PORTD_PIN9 9 -#define PORTD_PIN10 10 -#define PORTD_PIN11 11 -#define PORTD_PIN12 12 -#define PORTD_PIN13 13 -#define PORTD_PIN14 14 -#define PORTD_PIN15 15 -#define PORTD_PIN16 16 -#define PORTD_PIN17 17 -#define PORTD_PIN18 18 -#define PORTD_PIN19 19 -#define PORTD_PIN20 20 -#define PORTD_PIN21 21 -#define PORTD_PIN22 22 -#define PORTD_PIN23 23 -#define PORTD_PIN24 24 -#define PORTD_PIN25 25 -#define PORTD_PIN26 26 -#define PORTD_PIN27 27 -#define PORTD_PIN28 28 -#define PORTD_PIN29 29 -#define PORTD_PIN30 30 -#define PORTD_PIN31 31 - -#define TEENSY_PIN2_IOPORT IOPORT4 -#define TEENSY_PIN5_IOPORT IOPORT4 -#define TEENSY_PIN6_IOPORT IOPORT4 -#define TEENSY_PIN7_IOPORT IOPORT4 -#define TEENSY_PIN8_IOPORT IOPORT4 -#define TEENSY_PIN14_IOPORT IOPORT4 -#define TEENSY_PIN20_IOPORT IOPORT4 -#define TEENSY_PIN21_IOPORT IOPORT4 - -#define TEENSY_PIN31 0 -#define TEENSY_PIN26 1 -#define PORTE_PIN2 2 -#define PORTE_PIN3 3 -#define PORTE_PIN4 4 -#define PORTE_PIN5 5 -#define PORTE_PIN6 6 -#define PORTE_PIN7 7 -#define PORTE_PIN8 8 -#define PORTE_PIN9 9 -#define PORTE_PIN10 10 -#define PORTE_PIN11 11 -#define PORTE_PIN12 12 -#define PORTE_PIN13 13 -#define PORTE_PIN14 14 -#define PORTE_PIN15 15 -#define PORTE_PIN16 16 -#define PORTE_PIN17 17 -#define PORTE_PIN18 18 -#define PORTE_PIN19 19 -#define PORTE_PIN20 20 -#define PORTE_PIN21 21 -#define PORTE_PIN22 22 -#define PORTE_PIN23 23 -#define PORTE_PIN24 24 -#define PORTE_PIN25 25 -#define PORTE_PIN26 26 -#define PORTE_PIN27 27 -#define PORTE_PIN28 28 -#define PORTE_PIN29 29 -#define PORTE_PIN30 30 -#define PORTE_PIN31 31 - -#define TEENSY_PIN26_IOPORT IOPORT5 -#define TEENSY_PIN31_IOPORT IOPORT5 - -#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1) -#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2) -#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3) -#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4) -#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5) -#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6) -#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7) -#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8) -#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9) -#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10) -#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11) -#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12) -#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13) -#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14) -#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15) -#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16) -#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17) -#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18) -#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19) -#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20) -#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21) -#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22) -#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23) -#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) -#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26) -#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27) -#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28) -#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29) -#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30) -#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31) -#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32) -#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33) - -#define LINE_LED LINE_PIN13 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.mk deleted file mode 100644 index 572a524..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_3_1/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/PJRC_TEENSY_3_1/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/PJRC_TEENSY_3_1 diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.c b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.c deleted file mode 100644 index ab321b8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - /* - * PORTA setup. - * - * PTA1 - PIN3 - * PTA2 - PIN4 - * - * PTA18/19 crystal - * PTA0/3 SWD - */ - .port = IOPORT1, - .pads = { - PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTB setup. - * - * PTB0 - PIN16 - * PTB1 - PIN17 - * PTB2 - PIN19 - * PTB3 - PIN18 - * PTB16 - PIN0 - UART0_TX - * PTB17 - PIN1 - UART0_RX - */ - .port = IOPORT2, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTC setup. - * - * PTC0 - PIN15 - * PTC1 - PIN22 - * PTC2 - PIN23 - * PTC3 - PIN9 - * PTC4 - PIN10 - * PTC5 - PIN13 - * PTC6 - PIN11 - * PTC7 - PIN12 - */ - .port = IOPORT3, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTD setup. - * - * PTD0 - PIN2 - * PTD1 - PIN14 - * PTD2 - PIN7 - * PTD3 - PIN8 - * PTD4 - PIN6 - * PTD5 - PIN20 - * PTD6 - PIN21 - * PTD7 - PIN5 - */ - .port = IOPORT4, - .pads = { - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTE setup. - * - * PTE20 - PIN24 - * PTE21 - PIN25 - * PTE30 - PIN26 - */ - .port = IOPORT5, - .pads = { - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - kl2x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.h b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.h deleted file mode 100644 index ad75343..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the PJRC Teensy LC board. - */ - -/* - * Board identifier. - */ -#define BOARD_PJRC_TEENSY_LC -#define BOARD_NAME "PJRC Teensy LC" - -/* External 16 MHz crystal */ -#define KINETIS_XTAL_FREQUENCY 16000000UL - -/* Use internal capacitors for the crystal */ -#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P|OSC_CR_ERCLKEN - -/* - * MCU type - */ -#define KL26 - -/* - * IO pins assignments. - */ -#define PORTA_PIN0 0 -#define TEENSY_PIN3 1 -#define TEENSY_PIN4 2 -#define PORTA_PIN3 3 -#define PORTA_PIN4 4 -#define PORTA_PIN5 5 -#define PORTA_PIN6 6 -#define PORTA_PIN7 7 -#define PORTA_PIN8 8 -#define PORTA_PIN9 9 -#define PORTA_PIN10 10 -#define PORTA_PIN11 11 -#define PORTA_PIN12 12 -#define PORTA_PIN13 13 -#define PORTA_PIN14 14 -#define PORTA_PIN15 15 -#define PORTA_PIN16 16 -#define PORTA_PIN17 17 -#define PORTA_PIN18 18 -#define PORTA_PIN19 19 -#define PORTA_PIN20 20 -#define PORTA_PIN21 21 -#define PORTA_PIN22 22 -#define PORTA_PIN23 23 -#define PORTA_PIN24 24 -#define PORTA_PIN25 25 -#define PORTA_PIN26 26 -#define PORTA_PIN27 27 -#define PORTA_PIN28 28 -#define PORTA_PIN29 29 -#define PORTA_PIN30 30 -#define PORTA_PIN31 31 - -#define TEENSY_PIN3_IOPORT IOPORT1 -#define TEENSY_PIN4_IOPORT IOPORT1 - -#define TEENSY_PIN16 0 -#define TEENSY_PIN17 1 -#define TEENSY_PIN19 2 -#define TEENSY_PIN18 3 -#define PORTB_PIN4 4 -#define PORTB_PIN5 5 -#define PORTB_PIN6 6 -#define PORTB_PIN7 7 -#define PORTB_PIN8 8 -#define PORTB_PIN9 9 -#define PORTB_PIN10 10 -#define PORTB_PIN11 11 -#define PORTB_PIN12 12 -#define PORTB_PIN13 13 -#define PORTB_PIN14 14 -#define PORTB_PIN15 15 -#define TEENSY_PIN0 16 -#define TEENSY_PIN1 17 -#define PORTB_PIN18 18 -#define PORTB_PIN19 19 -#define PORTB_PIN20 20 -#define PORTB_PIN21 21 -#define PORTB_PIN22 22 -#define PORTB_PIN23 23 -#define PORTB_PIN24 24 -#define PORTB_PIN25 25 -#define PORTB_PIN26 26 -#define PORTB_PIN27 27 -#define PORTB_PIN28 28 -#define PORTB_PIN29 29 -#define PORTB_PIN30 30 -#define PORTB_PIN31 31 - -#define TEENSY_PIN0_IOPORT IOPORT2 -#define TEENSY_PIN1_IOPORT IOPORT2 -#define TEENSY_PIN16_IOPORT IOPORT2 -#define TEENSY_PIN17_IOPORT IOPORT2 -#define TEENSY_PIN18_IOPORT IOPORT2 -#define TEENSY_PIN19_IOPORT IOPORT2 - -#define TEENSY_PIN15 0 -#define TEENSY_PIN22 1 -#define TEENSY_PIN23 2 -#define TEENSY_PIN9 3 -#define TEENSY_PIN10 4 -#define TEENSY_PIN13 5 -#define TEENSY_PIN11 6 -#define TEENSY_PIN12 7 -#define PORTC_PIN8 8 -#define PORTC_PIN9 9 -#define PORTC_PIN10 10 -#define PORTC_PIN11 11 -#define PORTC_PIN12 12 -#define PORTC_PIN13 13 -#define PORTC_PIN14 14 -#define PORTC_PIN15 15 -#define PORTC_PIN16 16 -#define PORTC_PIN17 17 -#define PORTC_PIN18 18 -#define PORTC_PIN19 19 -#define PORTC_PIN20 20 -#define PORTC_PIN21 21 -#define PORTC_PIN22 22 -#define PORTC_PIN23 23 -#define PORTC_PIN24 24 -#define PORTC_PIN25 25 -#define PORTC_PIN26 26 -#define PORTC_PIN27 27 -#define PORTC_PIN28 28 -#define PORTC_PIN29 29 -#define PORTC_PIN30 30 -#define PORTC_PIN31 31 - -#define TEENSY_PIN9_IOPORT IOPORT3 -#define TEENSY_PIN10_IOPORT IOPORT3 -#define TEENSY_PIN11_IOPORT IOPORT3 -#define TEENSY_PIN12_IOPORT IOPORT3 -#define TEENSY_PIN13_IOPORT IOPORT3 -#define TEENSY_PIN15_IOPORT IOPORT3 -#define TEENSY_PIN22_IOPORT IOPORT3 -#define TEENSY_PIN23_IOPORT IOPORT3 - -#define TEENSY_PIN2 0 -#define TEENSY_PIN14 1 -#define TEENSY_PIN7 2 -#define TEENSY_PIN8 3 -#define TEENSY_PIN6 4 -#define TEENSY_PIN20 5 -#define TEENSY_PIN21 6 -#define TEENSY_PIN5 7 -#define PORTD_PIN8 8 -#define PORTD_PIN9 9 -#define PORTD_PIN10 10 -#define PORTD_PIN11 11 -#define PORTD_PIN12 12 -#define PORTD_PIN13 13 -#define PORTD_PIN14 14 -#define PORTD_PIN15 15 -#define PORTD_PIN16 16 -#define PORTD_PIN17 17 -#define PORTD_PIN18 18 -#define PORTD_PIN19 19 -#define PORTD_PIN20 20 -#define PORTD_PIN21 21 -#define PORTD_PIN22 22 -#define PORTD_PIN23 23 -#define PORTD_PIN24 24 -#define PORTD_PIN25 25 -#define PORTD_PIN26 26 -#define PORTD_PIN27 27 -#define PORTD_PIN28 28 -#define PORTD_PIN29 29 -#define PORTD_PIN30 30 -#define PORTD_PIN31 31 - -#define TEENSY_PIN2_IOPORT IOPORT4 -#define TEENSY_PIN5_IOPORT IOPORT4 -#define TEENSY_PIN6_IOPORT IOPORT4 -#define TEENSY_PIN7_IOPORT IOPORT4 -#define TEENSY_PIN8_IOPORT IOPORT4 -#define TEENSY_PIN14_IOPORT IOPORT4 -#define TEENSY_PIN20_IOPORT IOPORT4 -#define TEENSY_PIN21_IOPORT IOPORT4 - -#define PORTE_PIN0 0 -#define PORTE_PIN1 1 -#define PORTE_PIN2 2 -#define PORTE_PIN3 3 -#define PORTE_PIN4 4 -#define PORTE_PIN5 5 -#define PORTE_PIN6 6 -#define PORTE_PIN7 7 -#define PORTE_PIN8 8 -#define PORTE_PIN9 9 -#define PORTE_PIN10 10 -#define PORTE_PIN11 11 -#define PORTE_PIN12 12 -#define PORTE_PIN13 13 -#define PORTE_PIN14 14 -#define PORTE_PIN15 15 -#define PORTE_PIN16 16 -#define PORTE_PIN17 17 -#define PORTE_PIN18 18 -#define PORTE_PIN19 19 -#define TEENSY_PIN24 20 -#define TEENSY_PIN25 21 -#define PORTE_PIN22 22 -#define PORTE_PIN23 23 -#define PORTE_PIN24 24 -#define PORTE_PIN25 25 -#define PORTE_PIN26 26 -#define PORTE_PIN27 27 -#define PORTE_PIN28 28 -#define PORTE_PIN29 29 -#define TEENSY_PIN26 30 -#define PORTE_PIN31 31 - -#define TEENSY_PIN24_IOPORT IOPORT5 -#define TEENSY_PIN25_IOPORT IOPORT5 -#define TEENSY_PIN26_IOPORT IOPORT5 - -#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1) -#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2) -#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3) -#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4) -#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5) -#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6) -#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7) -#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8) -#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9) -#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10) -#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11) -#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12) -#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13) -#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14) -#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15) -#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16) -#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17) -#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18) -#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19) -#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20) -#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21) -#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22) -#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23) -#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24) -#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25) - -#define LINE_LED LINE_PIN13 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.mk deleted file mode 100644 index 85c643a..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/PJRC_TEENSY_LC/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/PJRC_TEENSY_LC/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/PJRC_TEENSY_LC diff --git a/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c b/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c deleted file mode 100644 index dc058f6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} -#endif -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h b/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h deleted file mode 100644 index a866c88..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h +++ /dev/null @@ -1,757 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for ST STM32F0-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32F0308_DISCOVERY -#define BOARD_NAME "ST STM32F0308-Discovery" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0 -#endif - -#define STM32_LSEDRV (3 << 3) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0 -#endif - -#define STM32_HSE_BYPASS - -/* - * MCU type as defined in the ST header. - */ -#define STM32F030x8 - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0 -#define GPIOA_PIN1 1 -#define GPIOA_PIN2 2 -#define GPIOA_PIN3 3 -#define GPIOA_PIN4 4 -#define GPIOA_PIN5 5 -#define GPIOA_PIN6 6 -#define GPIOA_PIN7 7 -#define GPIOA_PIN8 8 -#define GPIOA_PIN9 9 -#define GPIOA_PIN10 10 -#define GPIOA_PIN11 11 -#define GPIOA_PIN12 12 -#define GPIOA_SWDAT 13 -#define GPIOA_SWCLK 14 -#define GPIOA_PIN15 15 - -#define GPIOB_PIN0 0 -#define GPIOB_PIN1 1 -#define GPIOB_PIN2 2 -#define GPIOB_PIN3 3 -#define GPIOB_PIN4 4 -#define GPIOB_PIN5 5 -#define GPIOB_PIN6 6 -#define GPIOB_PIN7 7 -#define GPIOB_PIN8 8 -#define GPIOB_PIN9 9 -#define GPIOB_PIN10 10 -#define GPIOB_PIN11 11 -#define GPIOB_PIN12 12 -#define GPIOB_PIN13 13 -#define GPIOB_PIN14 14 -#define GPIOB_PIN15 15 - -#define GPIOC_PIN0 0 -#define GPIOC_PIN1 1 -#define GPIOC_PIN2 2 -#define GPIOC_PIN3 3 -#define GPIOC_PIN4 4 -#define GPIOC_PIN5 5 -#define GPIOC_PIN6 6 -#define GPIOC_PIN7 7 -#define GPIOC_LED4 8 -#define GPIOC_LED3 9 -#define GPIOC_PIN10 10 -#define GPIOC_PIN11 11 -#define GPIOC_PIN12 12 -#define GPIOC_PIN13 13 -#define GPIOC_OSC32_IN 14 -#define GPIOC_OSC32_OUT 15 - -#define GPIOD_PIN0 0 -#define GPIOD_PIN1 1 -#define GPIOD_PIN2 2 -#define GPIOD_PIN3 3 -#define GPIOD_PIN4 4 -#define GPIOD_PIN5 5 -#define GPIOD_PIN6 6 -#define GPIOD_PIN7 7 -#define GPIOD_PIN8 8 -#define GPIOD_PIN9 9 -#define GPIOD_PIN10 10 -#define GPIOD_PIN11 11 -#define GPIOD_PIN12 12 -#define GPIOD_PIN13 13 -#define GPIOD_PIN14 14 -#define GPIOD_PIN15 15 - -#define GPIOF_OSC_IN 0 -#define GPIOF_OSC_OUT 1 -#define GPIOF_PIN2 2 -#define GPIOF_PIN3 3 -#define GPIOF_PIN4 4 -#define GPIOF_PIN5 5 -#define GPIOF_PIN6 6 -#define GPIOF_PIN7 7 -#define GPIOF_PIN8 8 -#define GPIOF_PIN9 9 -#define GPIOF_PIN10 10 -#define GPIOF_PIN11 11 -#define GPIOF_PIN12 12 -#define GPIOF_PIN13 13 -#define GPIOF_PIN14 14 -#define GPIOF_PIN15 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_2M(n) (0U << ((n) * 2)) -#define PIN_OSPEED_10M(n) (1U << ((n) * 2)) -#define PIN_OSPEED_40M(n) (3U << ((n) * 2)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2)) -#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4)) - -/* - * GPIOA setup: - * - * PA0 - BUTTON (input floating). - * PA1 - PIN1 (input pullup). - * PA2 - PIN2 (input pullup). - * PA3 - PIN3 (input pullup). - * PA4 - PIN4 (input pullup). - * PA5 - PIN5 (input pullup). - * PA6 - PIN6 (input pullup). - * PA7 - PIN7 (input pullup). - * PA8 - PIN8 (input pullup). - * PA9 - PIN9 (input pullup). - * PA10 - PIN10 (input pullup). - * PA11 - PIN11 (input pullup). - * PA12 - PIN12 (input pullup). - * PA13 - SWDAT (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - PIN15 (input pullup). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ - PIN_MODE_INPUT(GPIOA_PIN1) | \ - PIN_MODE_INPUT(GPIOA_PIN2) | \ - PIN_MODE_INPUT(GPIOA_PIN3) | \ - PIN_MODE_INPUT(GPIOA_PIN4) | \ - PIN_MODE_INPUT(GPIOA_PIN5) | \ - PIN_MODE_INPUT(GPIOA_PIN6) | \ - PIN_MODE_INPUT(GPIOA_PIN7) | \ - PIN_MODE_INPUT(GPIOA_PIN8) | \ - PIN_MODE_INPUT(GPIOA_PIN9) | \ - PIN_MODE_INPUT(GPIOA_PIN10) | \ - PIN_MODE_INPUT(GPIOA_PIN11) | \ - PIN_MODE_INPUT(GPIOA_PIN12) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDAT) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_INPUT(GPIOA_PIN15)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDAT) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_2M(GPIOA_BUTTON) | \ - PIN_OSPEED_2M(GPIOA_PIN1) | \ - PIN_OSPEED_2M(GPIOA_PIN2) | \ - PIN_OSPEED_2M(GPIOA_PIN3) | \ - PIN_OSPEED_2M(GPIOA_PIN4) | \ - PIN_OSPEED_2M(GPIOA_PIN5) | \ - PIN_OSPEED_2M(GPIOA_PIN6) | \ - PIN_OSPEED_2M(GPIOA_PIN7) | \ - PIN_OSPEED_2M(GPIOA_PIN8) | \ - PIN_OSPEED_2M(GPIOA_PIN9) | \ - PIN_OSPEED_2M(GPIOA_PIN10) | \ - PIN_OSPEED_2M(GPIOA_PIN11) | \ - PIN_OSPEED_2M(GPIOA_PIN12) | \ - PIN_OSPEED_40M(GPIOA_SWDAT) | \ - PIN_OSPEED_40M(GPIOA_SWCLK) | \ - PIN_OSPEED_40M(GPIOA_PIN15)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDAT) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_PULLUP(GPIOA_PIN15)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ - PIN_ODR_HIGH(GPIOA_PIN1) | \ - PIN_ODR_HIGH(GPIOA_PIN2) | \ - PIN_ODR_HIGH(GPIOA_PIN3) | \ - PIN_ODR_HIGH(GPIOA_PIN4) | \ - PIN_ODR_HIGH(GPIOA_PIN5) | \ - PIN_ODR_HIGH(GPIOA_PIN6) | \ - PIN_ODR_HIGH(GPIOA_PIN7) | \ - PIN_ODR_HIGH(GPIOA_PIN8) | \ - PIN_ODR_HIGH(GPIOA_PIN9) | \ - PIN_ODR_HIGH(GPIOA_PIN10) | \ - PIN_ODR_HIGH(GPIOA_PIN11) | \ - PIN_ODR_HIGH(GPIOA_PIN12) | \ - PIN_ODR_HIGH(GPIOA_SWDAT) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_PIN15)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0) | \ - PIN_AFIO_AF(GPIOA_PIN1, 0) | \ - PIN_AFIO_AF(GPIOA_PIN2, 0) | \ - PIN_AFIO_AF(GPIOA_PIN3, 0) | \ - PIN_AFIO_AF(GPIOA_PIN4, 0) | \ - PIN_AFIO_AF(GPIOA_PIN5, 0) | \ - PIN_AFIO_AF(GPIOA_PIN6, 0) | \ - PIN_AFIO_AF(GPIOA_PIN7, 0)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ - PIN_AFIO_AF(GPIOA_PIN9, 0) | \ - PIN_AFIO_AF(GPIOA_PIN10, 0) | \ - PIN_AFIO_AF(GPIOA_PIN11, 0) | \ - PIN_AFIO_AF(GPIOA_PIN12, 0) | \ - PIN_AFIO_AF(GPIOA_SWDAT, 0) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0) | \ - PIN_AFIO_AF(GPIOA_PIN15, 0)) - -/* - * GPIOB setup: - * - * PB0 - PIN0 (input pullup). - * PB1 - PIN1 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - PIN3 (input pullup). - * PB4 - PIN4 (input pullup). - * PB5 - PIN5 (input pullup). - * PB6 - PIN6 (input pullup). - * PB7 - PIN7 (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ - PIN_MODE_INPUT(GPIOB_PIN1) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_INPUT(GPIOB_PIN3) | \ - PIN_MODE_INPUT(GPIOB_PIN4) | \ - PIN_MODE_INPUT(GPIOB_PIN5) | \ - PIN_MODE_INPUT(GPIOB_PIN6) | \ - PIN_MODE_INPUT(GPIOB_PIN7) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_2M(GPIOB_PIN0) | \ - PIN_OSPEED_2M(GPIOB_PIN1) | \ - PIN_OSPEED_40M(GPIOB_PIN2) | \ - PIN_OSPEED_40M(GPIOB_PIN3) | \ - PIN_OSPEED_40M(GPIOB_PIN4) | \ - PIN_OSPEED_2M(GPIOB_PIN5) | \ - PIN_OSPEED_2M(GPIOB_PIN6) | \ - PIN_OSPEED_2M(GPIOB_PIN7) | \ - PIN_OSPEED_2M(GPIOB_PIN8) | \ - PIN_OSPEED_2M(GPIOB_PIN9) | \ - PIN_OSPEED_2M(GPIOB_PIN10) | \ - PIN_OSPEED_2M(GPIOB_PIN11) | \ - PIN_OSPEED_2M(GPIOB_PIN12) | \ - PIN_OSPEED_2M(GPIOB_PIN13) | \ - PIN_OSPEED_2M(GPIOB_PIN14) | \ - PIN_OSPEED_2M(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ - PIN_ODR_HIGH(GPIOB_PIN1) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_HIGH(GPIOB_PIN3) | \ - PIN_ODR_HIGH(GPIOB_PIN4) | \ - PIN_ODR_HIGH(GPIOB_PIN5) | \ - PIN_ODR_HIGH(GPIOB_PIN6) | \ - PIN_ODR_HIGH(GPIOB_PIN7) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ - PIN_AFIO_AF(GPIOB_PIN1, 0) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0) | \ - PIN_AFIO_AF(GPIOB_PIN3, 0) | \ - PIN_AFIO_AF(GPIOB_PIN4, 0) | \ - PIN_AFIO_AF(GPIOB_PIN5, 0) | \ - PIN_AFIO_AF(GPIOB_PIN6, 0) | \ - PIN_AFIO_AF(GPIOB_PIN7, 0)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - LED4 (output pushpull maximum). - * PC9 - LED3 (output pushpull maximum). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - OSC32_IN (input floating). - * PC15 - OSC32_OUT (input floating). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_OUTPUT(GPIOC_LED4) | \ - PIN_MODE_OUTPUT(GPIOC_LED3) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ - PIN_MODE_INPUT(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_LED3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_2M(GPIOC_PIN0) | \ - PIN_OSPEED_2M(GPIOC_PIN1) | \ - PIN_OSPEED_2M(GPIOC_PIN2) | \ - PIN_OSPEED_2M(GPIOC_PIN3) | \ - PIN_OSPEED_2M(GPIOC_PIN4) | \ - PIN_OSPEED_2M(GPIOC_PIN5) | \ - PIN_OSPEED_2M(GPIOC_PIN6) | \ - PIN_OSPEED_2M(GPIOC_PIN7) | \ - PIN_OSPEED_40M(GPIOC_LED4) | \ - PIN_OSPEED_40M(GPIOC_LED3) | \ - PIN_OSPEED_2M(GPIOC_PIN10) | \ - PIN_OSPEED_2M(GPIOC_PIN11) | \ - PIN_OSPEED_2M(GPIOC_PIN12) | \ - PIN_OSPEED_2M(GPIOC_PIN13) | \ - PIN_OSPEED_40M(GPIOC_OSC32_IN) | \ - PIN_OSPEED_40M(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ - PIN_PUPDR_FLOATING(GPIOC_LED4) | \ - PIN_PUPDR_FLOATING(GPIOC_LED3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ - PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_LOW(GPIOC_LED4) | \ - PIN_ODR_LOW(GPIOC_LED3) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ - PIN_ODR_HIGH(GPIOC_OSC32_OUT)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED4, 0) | \ - PIN_AFIO_AF(GPIOC_LED3, 0) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0) | \ - PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \ - PIN_AFIO_AF(GPIOC_OSC32_OUT, 0)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_2M(GPIOD_PIN0) | \ - PIN_OSPEED_2M(GPIOD_PIN1) | \ - PIN_OSPEED_2M(GPIOD_PIN2) | \ - PIN_OSPEED_2M(GPIOD_PIN3) | \ - PIN_OSPEED_2M(GPIOD_PIN4) | \ - PIN_OSPEED_2M(GPIOD_PIN5) | \ - PIN_OSPEED_2M(GPIOD_PIN6) | \ - PIN_OSPEED_2M(GPIOD_PIN7) | \ - PIN_OSPEED_2M(GPIOD_PIN8) | \ - PIN_OSPEED_2M(GPIOD_PIN9) | \ - PIN_OSPEED_2M(GPIOD_PIN10) | \ - PIN_OSPEED_2M(GPIOD_PIN11) | \ - PIN_OSPEED_2M(GPIOD_PIN12) | \ - PIN_OSPEED_2M(GPIOD_PIN13) | \ - PIN_OSPEED_2M(GPIOD_PIN14) | \ - PIN_OSPEED_2M(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0)) - -/* - * GPIOF setup: - * - * PF0 - OSC_IN (input floating). - * PF1 - OSC_OUT (input floating). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ - PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ - PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_2M(GPIOF_OSC_IN) | \ - PIN_OSPEED_2M(GPIOF_OSC_OUT) | \ - PIN_OSPEED_2M(GPIOF_PIN2) | \ - PIN_OSPEED_2M(GPIOF_PIN3) | \ - PIN_OSPEED_2M(GPIOF_PIN4) | \ - PIN_OSPEED_2M(GPIOF_PIN5) | \ - PIN_OSPEED_2M(GPIOF_PIN6) | \ - PIN_OSPEED_2M(GPIOF_PIN7) | \ - PIN_OSPEED_2M(GPIOF_PIN8) | \ - PIN_OSPEED_2M(GPIOF_PIN9) | \ - PIN_OSPEED_2M(GPIOF_PIN10) | \ - PIN_OSPEED_2M(GPIOF_PIN11) | \ - PIN_OSPEED_2M(GPIOF_PIN12) | \ - PIN_OSPEED_2M(GPIOF_PIN13) | \ - PIN_OSPEED_2M(GPIOF_PIN14) | \ - PIN_OSPEED_2M(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ - PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ - PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0) | \ - PIN_AFIO_AF(GPIOF_OSC_OUT, 0) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0)) - - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk deleted file mode 100644 index 35b3939..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/ST_STM32F0308_DISCOVERY diff --git a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c b/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c deleted file mode 100644 index 2bbbc4c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOA_DATA, VAL_GPIOA_DIR, VAL_GPIOA_AFSEL, VAL_GPIOA_DR2R, - VAL_GPIOA_DR4R, VAL_GPIOA_DR8R, VAL_GPIOA_ODR, VAL_GPIOA_PUR, - VAL_GPIOA_PDR, VAL_GPIOA_SLR, VAL_GPIOA_DEN, VAL_GPIOA_AMSEL, - VAL_GPIOA_PCTL}, - {VAL_GPIOB_DATA, VAL_GPIOB_DIR, VAL_GPIOB_AFSEL, VAL_GPIOB_DR2R, - VAL_GPIOB_DR4R, VAL_GPIOB_DR8R, VAL_GPIOB_ODR, VAL_GPIOB_PUR, - VAL_GPIOB_PDR, VAL_GPIOB_SLR, VAL_GPIOB_DEN, VAL_GPIOB_AMSEL, - VAL_GPIOB_PCTL}, - {VAL_GPIOC_DATA, VAL_GPIOC_DIR, VAL_GPIOC_AFSEL, VAL_GPIOC_DR2R, - VAL_GPIOC_DR4R, VAL_GPIOC_DR8R, VAL_GPIOC_ODR, VAL_GPIOC_PUR, - VAL_GPIOC_PDR, VAL_GPIOC_SLR, VAL_GPIOC_DEN, VAL_GPIOC_AMSEL, - VAL_GPIOC_PCTL}, - {VAL_GPIOD_DATA, VAL_GPIOD_DIR, VAL_GPIOD_AFSEL, VAL_GPIOD_DR2R, - VAL_GPIOD_DR4R, VAL_GPIOD_DR8R, VAL_GPIOD_ODR, VAL_GPIOD_PUR, - VAL_GPIOD_PDR, VAL_GPIOD_SLR, VAL_GPIOD_DEN, VAL_GPIOD_AMSEL, - VAL_GPIOD_PCTL}, - {VAL_GPIOE_DATA, VAL_GPIOE_DIR, VAL_GPIOE_AFSEL, VAL_GPIOE_DR2R, - VAL_GPIOE_DR4R, VAL_GPIOE_DR8R, VAL_GPIOE_ODR, VAL_GPIOE_PUR, - VAL_GPIOE_PDR, VAL_GPIOE_SLR, VAL_GPIOE_DEN, VAL_GPIOE_AMSEL, - VAL_GPIOE_PCTL}, - {VAL_GPIOF_DATA, VAL_GPIOF_DIR, VAL_GPIOF_AFSEL, VAL_GPIOF_DR2R, - VAL_GPIOF_DR4R, VAL_GPIOF_DR8R, VAL_GPIOF_ODR, VAL_GPIOF_PUR, - VAL_GPIOF_PDR, VAL_GPIOF_SLR, VAL_GPIOF_DEN, VAL_GPIOF_AMSEL, - VAL_GPIOF_PCTL} -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization is performed just after reset before BSS and - * DATA segments initialization. - */ -void __early_init(void) -{ - tiva_clock_init(); -} - -/** - * @brief Late initialization code. - * @note This initialization is performed after BSS and DATA segments - * initialization and before invoking the main() function. - */ -void boardInit(void) -{ -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h b/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h deleted file mode 100644 index 367dce1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h +++ /dev/null @@ -1,943 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Texas Instruments TM4C123G Launchpad Board. - */ - -/* - * Board identifier. - */ -#define BOARD_TI_TM4C123G_LAUNCHPAD -#define BOARD_NAME "Texas Instruments TM4C123G Launchpad" - -/* - * MCU type - */ -//#define TM4C1230C3PM -//#define TM4C1230D5PM -//#define TM4C1230E6PM -//#define TM4C1230H6PM -//#define TM4C1231C3PM -//#define TM4C1231D5PM -//#define TM4C1231D5PZ -//#define TM4C1231E6PM -//#define TM4C1231E6PZ -//#define TM4C1231H6PGE -//#define TM4C1231H6PM -//#define TM4C1231H6PZ -//#define TM4C1232C3PM -//#define TM4C1232D5PM -//#define TM4C1232E6PM -//#define TM4C1232H6PM -//#define TM4C1233C3PM -//#define TM4C1233D5PM -//#define TM4C1233D5PZ -//#define TM4C1233E6PM -//#define TM4C1233E6PZ -//#define TM4C1233H6PGE -//#define TM4C1233H6PM -//#define TM4C1233H6PZ -//#define TM4C1236D5PM -//#define TM4C1236E6PM -//#define TM4C1236H6PM -//#define TM4C1237D5PM -//#define TM4C1237D5PZ -//#define TM4C1237E6PM -//#define TM4C1237E6PZ -//#define TM4C1237H6PGE -//#define TM4C1237H6PM -//#define TM4C1237H6PZ -//#define TM4C123AE6PM -//#define TM4C123AH6PM -//#define TM4C123BE6PM -//#define TM4C123BE6PZ -//#define TM4C123BH6PGE -//#define TM4C123BH6PM -//#define TM4C123BH6PZ -//#define TM4C123BH6ZRB -//#define TM4C123FE6PM -//#define TM4C123FH6PM -//#define TM4C123GE6PM -//#define TM4C123GE6PZ -//#define TM4C123GH6PGE -#define TM4C123GH6PM -//#define TM4C123GH6PZ -//#define TM4C123GH6ZRB -//#define TM4C123GH5ZXR - -/* - * Board oscillators-related settings. - */ -#define TIVA_XTAL_VALUE 16000000 - -/* - * IO pins assignments. - */ -#define GPIOA_UART0_RX 0 -#define GPIOA_UART0_TX 1 -#define GPIOA_SSI0_CLK 2 -#define GPIOA_PIN3 3 -#define GPIOA_SSI0_RX 4 -#define GPIOA_SSI0_TX 5 -#define GPIOA_PIN6 6 -#define GPIOA_PIN7 7 - -#define GPIOB_PIN0 0 -#define GPIOB_PIN1 1 -#define GPIOB_I2C0_SCL 2 -#define GPIOB_I2C0_SDA 3 -#define GPIOB_PIN4 4 -#define GPIOB_PIN5 5 -#define GPIOB_PIN6 6 -#define GPIOB_PIN7 7 - -#define GPIOC_TCK_SWCLK 0 -#define GPIOC_TMS_SWDIO 1 -#define GPIOC_TDI 2 -#define GPIOC_TDO_SWO 3 -#define GPIOC_PIN4 4 -#define GPIOC_PIN5 5 -#define GPIOC_PIN6 6 -#define GPIOC_PIN7 7 - -#define GPIOD_PIN0 0 -#define GPIOD_PIN1 1 -#define GPIOD_PIN2 2 -#define GPIOD_PIN3 3 -#define GPIOD_PIN4 4 -#define GPIOD_PIN5 5 -#define GPIOD_PIN6 6 -#define GPIOD_PIN7 7 - -#define GPIOE_PIN0 0 -#define GPIOE_PIN1 1 -#define GPIOE_PIN2 2 -#define GPIOE_PIN3 3 -#define GPIOE_PIN4 4 -#define GPIOE_PIN5 5 -#define GPIOE_PIN6 6 -#define GPIOE_PIN7 7 - -#define GPIOF_SW2 0 -#define GPIOF_LED_RED 1 -#define GPIOF_LED_BLUE 2 -#define GPIOF_LED_GREEN 3 -#define GPIOF_SW1 4 -#define GPIOF_PIN5 5 -#define GPIOF_PIN6 6 -#define GPIOF_PIN7 7 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - */ -#define PIN_DATA_LOW(n) (0U << (n)) -#define PIN_DATA_HIGH(n) (1U << (n)) - -#define PIN_DIR_IN(n) (0U << (n)) -#define PIN_DIR_OUT(n) (1U << (n)) - -#define PIN_AFSEL_GPIO(n) (0U << (n)) -#define PIN_AFSEL_ALTERNATE(n) (1U << (n)) - -#define PIN_ODR_DISABLE(n) (0U << (n)) -#define PIN_ODR_ENABLE(n) (1U << (n)) - -#define PIN_PxR_DISABLE(n) (0U << (n)) -#define PIN_PxR_ENABLE(n) (1U << (n)) - -#define PIN_DEN_DISABLE(n) (0U << (n)) -#define PIN_DEN_ENABLE(n) (1U << (n)) - -#define PIN_AMSEL_DISABLE(n) (0U << (n)) -#define PIN_AMSEL_ENABLE(n) (1U << (n)) - -#define PIN_DRxR_DISABLE(n) (0U << (n)) -#define PIN_DRxR_ENABLE(n) (1U << (n)) - -#define PIN_SLR_DISABLE(n) (0U << (n)) -#define PIN_SLR_ENABLE(n) (1U << (n)) - -#define PIN_PCTL_MODE(n, mode) (mode << ((n) * 4)) - -/* - * GPIOA Setup: - * - * PA0 - UART0 RX () - * PA1 - UART0 TX () - * PA2 - PIN2 () - * PA3 - PIN3 () - * PA4 - PIN4 () - * PA5 - PIN5 () - * PA6 - PIN6 () - * PA7 - PIN7 () - */ -#define VAL_GPIOA_DATA (PIN_DATA_LOW(GPIOA_UART0_RX) | \ - PIN_DATA_LOW(GPIOA_UART0_TX) | \ - PIN_DATA_LOW(GPIOA_SSI0_CLK) | \ - PIN_DATA_LOW(GPIOA_PIN3) | \ - PIN_DATA_LOW(GPIOA_SSI0_RX) | \ - PIN_DATA_LOW(GPIOA_SSI0_TX) | \ - PIN_DATA_LOW(GPIOA_PIN6) | \ - PIN_DATA_LOW(GPIOA_PIN7)) - -#define VAL_GPIOA_DIR (PIN_DIR_IN(GPIOA_UART0_RX) | \ - PIN_DIR_IN(GPIOA_UART0_TX) | \ - PIN_DIR_IN(GPIOA_SSI0_CLK) | \ - PIN_DIR_IN(GPIOA_PIN3) | \ - PIN_DIR_IN(GPIOA_SSI0_RX) | \ - PIN_DIR_IN(GPIOA_SSI0_TX) | \ - PIN_DIR_IN(GPIOA_PIN6) | \ - PIN_DIR_IN(GPIOA_PIN7)) - -#define VAL_GPIOA_AFSEL (PIN_AFSEL_GPIO(GPIOA_UART0_RX) | \ - PIN_AFSEL_GPIO(GPIOA_UART0_TX) | \ - PIN_AFSEL_GPIO(GPIOA_SSI0_CLK) | \ - PIN_AFSEL_GPIO(GPIOA_PIN3) | \ - PIN_AFSEL_GPIO(GPIOA_SSI0_RX) | \ - PIN_AFSEL_GPIO(GPIOA_SSI0_TX) | \ - PIN_AFSEL_GPIO(GPIOA_PIN6) | \ - PIN_AFSEL_GPIO(GPIOA_PIN7)) - -#define VAL_GPIOA_ODR (PIN_ODR_DISABLE(GPIOA_UART0_RX) | \ - PIN_ODR_DISABLE(GPIOA_UART0_TX) | \ - PIN_ODR_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_ODR_DISABLE(GPIOA_PIN3) | \ - PIN_ODR_DISABLE(GPIOA_SSI0_RX) | \ - PIN_ODR_DISABLE(GPIOA_SSI0_TX) | \ - PIN_ODR_DISABLE(GPIOA_PIN6) | \ - PIN_ODR_DISABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_PUR (PIN_PxR_DISABLE(GPIOA_UART0_RX) | \ - PIN_PxR_DISABLE(GPIOA_UART0_TX) | \ - PIN_PxR_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_PxR_DISABLE(GPIOA_PIN3) | \ - PIN_PxR_DISABLE(GPIOA_SSI0_RX) | \ - PIN_PxR_DISABLE(GPIOA_SSI0_TX) | \ - PIN_PxR_DISABLE(GPIOA_PIN6) | \ - PIN_PxR_DISABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_PDR (PIN_PxR_DISABLE(GPIOA_UART0_RX) | \ - PIN_PxR_DISABLE(GPIOA_UART0_TX) | \ - PIN_PxR_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_PxR_DISABLE(GPIOA_PIN3) | \ - PIN_PxR_DISABLE(GPIOA_SSI0_RX) | \ - PIN_PxR_DISABLE(GPIOA_SSI0_TX) | \ - PIN_PxR_DISABLE(GPIOA_PIN6) | \ - PIN_PxR_DISABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_DEN (PIN_DEN_ENABLE(GPIOA_UART0_RX) | \ - PIN_DEN_ENABLE(GPIOA_UART0_TX) | \ - PIN_DEN_ENABLE(GPIOA_SSI0_CLK) | \ - PIN_DEN_ENABLE(GPIOA_PIN3) | \ - PIN_DEN_ENABLE(GPIOA_SSI0_RX) | \ - PIN_DEN_ENABLE(GPIOA_SSI0_TX) | \ - PIN_DEN_ENABLE(GPIOA_PIN6) | \ - PIN_DEN_ENABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_AMSEL (PIN_AMSEL_DISABLE(GPIOA_UART0_RX) | \ - PIN_AMSEL_DISABLE(GPIOA_UART0_TX) | \ - PIN_AMSEL_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_AMSEL_DISABLE(GPIOA_PIN3)) - -#define VAL_GPIOA_DR2R (PIN_DRxR_ENABLE(GPIOA_UART0_RX) | \ - PIN_DRxR_ENABLE(GPIOA_UART0_TX) | \ - PIN_DRxR_ENABLE(GPIOA_SSI0_CLK) | \ - PIN_DRxR_ENABLE(GPIOA_PIN3) | \ - PIN_DRxR_ENABLE(GPIOA_SSI0_RX) | \ - PIN_DRxR_ENABLE(GPIOA_SSI0_TX) | \ - PIN_DRxR_ENABLE(GPIOA_PIN6) | \ - PIN_DRxR_ENABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_DR4R (PIN_DRxR_DISABLE(GPIOA_UART0_RX) | \ - PIN_DRxR_DISABLE(GPIOA_UART0_TX) | \ - PIN_DRxR_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_DRxR_DISABLE(GPIOA_PIN3) | \ - PIN_DRxR_DISABLE(GPIOA_SSI0_RX) | \ - PIN_DRxR_DISABLE(GPIOA_SSI0_TX) | \ - PIN_DRxR_DISABLE(GPIOA_PIN6) | \ - PIN_DRxR_DISABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_DR8R (PIN_DRxR_DISABLE(GPIOA_UART0_RX) | \ - PIN_DRxR_DISABLE(GPIOA_UART0_TX) | \ - PIN_DRxR_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_DRxR_DISABLE(GPIOA_PIN3) | \ - PIN_DRxR_DISABLE(GPIOA_SSI0_RX) | \ - PIN_DRxR_DISABLE(GPIOA_SSI0_TX) | \ - PIN_DRxR_DISABLE(GPIOA_PIN6) | \ - PIN_DRxR_DISABLE(GPIOA_PIN7)) - - -#define VAL_GPIOA_SLR (PIN_SLR_DISABLE(GPIOA_UART0_RX) | \ - PIN_SLR_DISABLE(GPIOA_UART0_TX) | \ - PIN_SLR_DISABLE(GPIOA_SSI0_CLK) | \ - PIN_SLR_DISABLE(GPIOA_PIN3) | \ - PIN_SLR_DISABLE(GPIOA_SSI0_RX) | \ - PIN_SLR_DISABLE(GPIOA_SSI0_TX) | \ - PIN_SLR_DISABLE(GPIOA_PIN6) | \ - PIN_SLR_DISABLE(GPIOA_PIN7)) - -#define VAL_GPIOA_PCTL (PIN_PCTL_MODE(GPIOA_UART0_RX, 0) | \ - PIN_PCTL_MODE(GPIOA_UART0_TX, 0) | \ - PIN_PCTL_MODE(GPIOA_SSI0_CLK, 0) | \ - PIN_PCTL_MODE(GPIOA_PIN3, 0) | \ - PIN_PCTL_MODE(GPIOA_SSI0_RX, 0) | \ - PIN_PCTL_MODE(GPIOA_SSI0_TX, 0) | \ - PIN_PCTL_MODE(GPIOA_PIN6, 0) | \ - PIN_PCTL_MODE(GPIOA_PIN7, 0)) - -/* - * GPIOB Setup: - * - * PB0 - PIN0 () - * PB1 - PIN1 () - * PB2 - I2C0_SCL () - * PB3 - I2C0_SDA () - * PB4 - PIN4 () - * PB5 - PIN5 () - * PB6 - PIN6 () - * PB7 - PIN7 () - */ -#define VAL_GPIOB_DATA (PIN_DATA_LOW(GPIOB_PIN0) | \ - PIN_DATA_LOW(GPIOB_PIN1) | \ - PIN_DATA_LOW(GPIOB_I2C0_SCL) | \ - PIN_DATA_LOW(GPIOB_I2C0_SDA) | \ - PIN_DATA_LOW(GPIOB_PIN4) | \ - PIN_DATA_LOW(GPIOB_PIN5) | \ - PIN_DATA_LOW(GPIOB_PIN6) | \ - PIN_DATA_LOW(GPIOB_PIN7)) - -#define VAL_GPIOB_DIR (PIN_DIR_IN(GPIOB_PIN0) | \ - PIN_DIR_IN(GPIOB_PIN1) | \ - PIN_DIR_IN(GPIOB_I2C0_SCL) | \ - PIN_DIR_IN(GPIOB_I2C0_SDA) | \ - PIN_DIR_IN(GPIOB_PIN4) | \ - PIN_DIR_IN(GPIOB_PIN5) | \ - PIN_DIR_IN(GPIOB_PIN6) | \ - PIN_DIR_IN(GPIOB_PIN7)) - -#define VAL_GPIOB_AFSEL (PIN_AFSEL_GPIO(GPIOB_PIN0) | \ - PIN_AFSEL_GPIO(GPIOB_PIN1) | \ - PIN_AFSEL_GPIO(GPIOB_I2C0_SCL) | \ - PIN_AFSEL_GPIO(GPIOB_I2C0_SDA) | \ - PIN_AFSEL_GPIO(GPIOB_PIN4) | \ - PIN_AFSEL_GPIO(GPIOB_PIN5) | \ - PIN_AFSEL_GPIO(GPIOB_PIN6) | \ - PIN_AFSEL_GPIO(GPIOB_PIN7)) - -#define VAL_GPIOB_DR2R (PIN_DRxR_ENABLE(GPIOB_PIN0) | \ - PIN_DRxR_ENABLE(GPIOB_PIN1) | \ - PIN_DRxR_ENABLE(GPIOB_I2C0_SCL) | \ - PIN_DRxR_ENABLE(GPIOB_I2C0_SDA) | \ - PIN_DRxR_ENABLE(GPIOB_PIN4) | \ - PIN_DRxR_ENABLE(GPIOB_PIN5) | \ - PIN_DRxR_ENABLE(GPIOB_PIN6) | \ - PIN_DRxR_ENABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_DR4R (PIN_DRxR_DISABLE(GPIOB_PIN0) | \ - PIN_DRxR_DISABLE(GPIOB_PIN1) | \ - PIN_DRxR_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_DRxR_DISABLE(GPIOB_I2C0_SDA) | \ - PIN_DRxR_DISABLE(GPIOB_PIN4) | \ - PIN_DRxR_DISABLE(GPIOB_PIN5) | \ - PIN_DRxR_DISABLE(GPIOB_PIN6) | \ - PIN_DRxR_DISABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_DR8R (PIN_DRxR_DISABLE(GPIOB_PIN0) | \ - PIN_DRxR_DISABLE(GPIOB_PIN1) | \ - PIN_DRxR_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_DRxR_DISABLE(GPIOB_I2C0_SDA) | \ - PIN_DRxR_DISABLE(GPIOB_PIN4) | \ - PIN_DRxR_DISABLE(GPIOB_PIN5) | \ - PIN_DRxR_DISABLE(GPIOB_PIN6) | \ - PIN_DRxR_DISABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_ODR (PIN_ODR_DISABLE(GPIOB_PIN0) | \ - PIN_ODR_DISABLE(GPIOB_PIN1) | \ - PIN_ODR_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_ODR_DISABLE(GPIOB_I2C0_SDA) | \ - PIN_ODR_DISABLE(GPIOB_PIN4) | \ - PIN_ODR_DISABLE(GPIOB_PIN5) | \ - PIN_ODR_DISABLE(GPIOB_PIN6) | \ - PIN_ODR_DISABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_PUR (PIN_PxR_DISABLE(GPIOB_PIN0) | \ - PIN_PxR_DISABLE(GPIOB_PIN1) | \ - PIN_PxR_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_PxR_DISABLE(GPIOB_I2C0_SDA) | \ - PIN_PxR_DISABLE(GPIOB_PIN4) | \ - PIN_PxR_DISABLE(GPIOB_PIN5) | \ - PIN_PxR_DISABLE(GPIOB_PIN6) | \ - PIN_PxR_DISABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_PDR (PIN_PxR_DISABLE(GPIOB_PIN0) | \ - PIN_PxR_DISABLE(GPIOB_PIN1) | \ - PIN_PxR_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_PxR_DISABLE(GPIOB_I2C0_SDA) | \ - PIN_PxR_DISABLE(GPIOB_PIN4) | \ - PIN_PxR_DISABLE(GPIOB_PIN5) | \ - PIN_PxR_DISABLE(GPIOB_PIN6) | \ - PIN_PxR_DISABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_SLR (PIN_SLR_DISABLE(GPIOB_PIN0) | \ - PIN_SLR_DISABLE(GPIOB_PIN1) | \ - PIN_SLR_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_SLR_DISABLE(GPIOB_I2C0_SDA) | \ - PIN_SLR_DISABLE(GPIOB_PIN4) | \ - PIN_SLR_DISABLE(GPIOB_PIN5) | \ - PIN_SLR_DISABLE(GPIOB_PIN6) | \ - PIN_SLR_DISABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_DEN (PIN_DEN_ENABLE(GPIOB_PIN0) | \ - PIN_DEN_ENABLE(GPIOB_PIN1) | \ - PIN_DEN_ENABLE(GPIOB_I2C0_SCL) | \ - PIN_DEN_ENABLE(GPIOB_I2C0_SDA) | \ - PIN_DEN_ENABLE(GPIOB_PIN4) | \ - PIN_DEN_ENABLE(GPIOB_PIN5) | \ - PIN_DEN_ENABLE(GPIOB_PIN6) | \ - PIN_DEN_ENABLE(GPIOB_PIN7)) - -#define VAL_GPIOB_AMSEL (PIN_AMSEL_DISABLE(GPIOB_PIN0) | \ - PIN_AMSEL_DISABLE(GPIOB_PIN1) | \ - PIN_AMSEL_DISABLE(GPIOB_I2C0_SCL) | \ - PIN_AMSEL_DISABLE(GPIOB_I2C0_SDA)) - -#define VAL_GPIOB_PCTL (PIN_PCTL_MODE(GPIOB_PIN0, 0) | \ - PIN_PCTL_MODE(GPIOB_PIN1, 0) | \ - PIN_PCTL_MODE(GPIOB_I2C0_SCL, 0) | \ - PIN_PCTL_MODE(GPIOB_I2C0_SDA, 0) | \ - PIN_PCTL_MODE(GPIOB_PIN4, 0) | \ - PIN_PCTL_MODE(GPIOB_PIN5, 0) | \ - PIN_PCTL_MODE(GPIOB_PIN6, 0) | \ - PIN_PCTL_MODE(GPIOB_PIN7, 0)) - -/* - * GPIOC Setup: - * - * PC0 - TCK_SWCLK (alternate 1) - * PC1 - TMS_SWDIO (alternate 1) - * PC2 - TDI (alternate 1) - * PC3 - TDO_SWO (alternate 1) - * PC4 - PIN4 () - * PC5 - PIN5 () - * PC6 - PIN6 () - * PC7 - PIN7 () - */ - -#define VAL_GPIOC_DATA (PIN_DATA_LOW(GPIOC_TCK_SWCLK) | \ - PIN_DATA_LOW(GPIOC_TMS_SWDIO) | \ - PIN_DATA_LOW(GPIOC_TDI) | \ - PIN_DATA_LOW(GPIOC_TDO_SWO) | \ - PIN_DATA_LOW(GPIOC_PIN4) | \ - PIN_DATA_LOW(GPIOC_PIN5) | \ - PIN_DATA_LOW(GPIOC_PIN6) | \ - PIN_DATA_LOW(GPIOC_PIN7)) - -#define VAL_GPIOC_DIR (PIN_DIR_IN(GPIOC_TCK_SWCLK) | \ - PIN_DIR_IN(GPIOC_TMS_SWDIO) | \ - PIN_DIR_IN(GPIOC_TDI) | \ - PIN_DIR_OUT(GPIOC_TDO_SWO) | \ - PIN_DIR_IN(GPIOC_PIN4) | \ - PIN_DIR_IN(GPIOC_PIN5) | \ - PIN_DIR_IN(GPIOC_PIN6) | \ - PIN_DIR_IN(GPIOC_PIN7)) - -#define VAL_GPIOC_AFSEL (PIN_AFSEL_ALTERNATE(GPIOC_TCK_SWCLK) | \ - PIN_AFSEL_ALTERNATE(GPIOC_TMS_SWDIO) | \ - PIN_AFSEL_ALTERNATE(GPIOC_TDI) | \ - PIN_AFSEL_ALTERNATE(GPIOC_TDO_SWO) | \ - PIN_AFSEL_GPIO(GPIOC_PIN4) | \ - PIN_AFSEL_GPIO(GPIOC_PIN5) | \ - PIN_AFSEL_GPIO(GPIOC_PIN6) | \ - PIN_AFSEL_GPIO(GPIOC_PIN7)) - -#define VAL_GPIOC_DR2R (PIN_DRxR_ENABLE(GPIOC_TCK_SWCLK) | \ - PIN_DRxR_ENABLE(GPIOC_TMS_SWDIO) | \ - PIN_DRxR_ENABLE(GPIOC_TDI) | \ - PIN_DRxR_ENABLE(GPIOC_TDO_SWO) | \ - PIN_DRxR_ENABLE(GPIOC_PIN4) | \ - PIN_DRxR_ENABLE(GPIOC_PIN5) | \ - PIN_DRxR_ENABLE(GPIOC_PIN6) | \ - PIN_DRxR_ENABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_DR4R (PIN_DRxR_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_DRxR_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_DRxR_DISABLE(GPIOC_TDI) | \ - PIN_DRxR_DISABLE(GPIOC_TDO_SWO) | \ - PIN_DRxR_DISABLE(GPIOC_PIN4) | \ - PIN_DRxR_DISABLE(GPIOC_PIN5) | \ - PIN_DRxR_DISABLE(GPIOC_PIN6) | \ - PIN_DRxR_DISABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_DR8R (PIN_DRxR_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_DRxR_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_DRxR_DISABLE(GPIOC_TDI) | \ - PIN_DRxR_DISABLE(GPIOC_TDO_SWO) | \ - PIN_DRxR_DISABLE(GPIOC_PIN4) | \ - PIN_DRxR_DISABLE(GPIOC_PIN5) | \ - PIN_DRxR_DISABLE(GPIOC_PIN6) | \ - PIN_DRxR_DISABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_ODR (PIN_ODR_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_ODR_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_ODR_DISABLE(GPIOC_TDI) | \ - PIN_ODR_DISABLE(GPIOC_TDO_SWO) | \ - PIN_ODR_DISABLE(GPIOC_PIN4) | \ - PIN_ODR_DISABLE(GPIOC_PIN5) | \ - PIN_ODR_DISABLE(GPIOC_PIN6) | \ - PIN_ODR_DISABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_PUR (PIN_PxR_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_PxR_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_PxR_DISABLE(GPIOC_TDI) | \ - PIN_PxR_DISABLE(GPIOC_TDO_SWO) | \ - PIN_PxR_DISABLE(GPIOC_PIN4) | \ - PIN_PxR_DISABLE(GPIOC_PIN5) | \ - PIN_PxR_DISABLE(GPIOC_PIN6) | \ - PIN_PxR_DISABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_PDR (PIN_PxR_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_PxR_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_PxR_DISABLE(GPIOC_TDI) | \ - PIN_PxR_DISABLE(GPIOC_TDO_SWO) | \ - PIN_PxR_DISABLE(GPIOC_PIN4) | \ - PIN_PxR_DISABLE(GPIOC_PIN5) | \ - PIN_PxR_DISABLE(GPIOC_PIN6) | \ - PIN_PxR_DISABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_SLR (PIN_SLR_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_SLR_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_SLR_DISABLE(GPIOC_TDI) | \ - PIN_SLR_DISABLE(GPIOC_TDO_SWO) | \ - PIN_SLR_DISABLE(GPIOC_PIN4) | \ - PIN_SLR_DISABLE(GPIOC_PIN5) | \ - PIN_SLR_DISABLE(GPIOC_PIN6) | \ - PIN_SLR_DISABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_DEN (PIN_DEN_ENABLE(GPIOC_TCK_SWCLK) | \ - PIN_DEN_ENABLE(GPIOC_TMS_SWDIO) | \ - PIN_DEN_ENABLE(GPIOC_TDI) | \ - PIN_DEN_ENABLE(GPIOC_TDO_SWO) | \ - PIN_DEN_ENABLE(GPIOC_PIN4) | \ - PIN_DEN_ENABLE(GPIOC_PIN5) | \ - PIN_DEN_ENABLE(GPIOC_PIN6) | \ - PIN_DEN_ENABLE(GPIOC_PIN7)) - -#define VAL_GPIOC_AMSEL (PIN_AMSEL_DISABLE(GPIOC_TCK_SWCLK) | \ - PIN_AMSEL_DISABLE(GPIOC_TMS_SWDIO) | \ - PIN_AMSEL_DISABLE(GPIOC_TDI) | \ - PIN_AMSEL_DISABLE(GPIOC_TDO_SWO)) - -#define VAL_GPIOC_PCTL (PIN_PCTL_MODE(GPIOC_TCK_SWCLK, 1) | \ - PIN_PCTL_MODE(GPIOC_TMS_SWDIO, 1) | \ - PIN_PCTL_MODE(GPIOC_TDI, 1) | \ - PIN_PCTL_MODE(GPIOC_TDO_SWO, 1) | \ - PIN_PCTL_MODE(GPIOC_PIN4, 0) | \ - PIN_PCTL_MODE(GPIOC_PIN5, 0) | \ - PIN_PCTL_MODE(GPIOC_PIN6, 0) | \ - PIN_PCTL_MODE(GPIOC_PIN7, 0)) - -/* - * GPIOD Setup: - * - * PD0 - PIN0 () - * PD1 - PIN1 () - * PD2 - PIN2 () - * PD3 - PIN3 () - * PD4 - PIN4 () - * PD5 - PIN5 () - * PD6 - PIN6 () - * PD7 - PIN7 () - */ -#define VAL_GPIOD_DATA (PIN_DATA_LOW(GPIOD_PIN0) | \ - PIN_DATA_LOW(GPIOD_PIN1) | \ - PIN_DATA_LOW(GPIOD_PIN2) | \ - PIN_DATA_LOW(GPIOD_PIN3) | \ - PIN_DATA_LOW(GPIOD_PIN4) | \ - PIN_DATA_LOW(GPIOD_PIN5) | \ - PIN_DATA_LOW(GPIOD_PIN6) | \ - PIN_DATA_LOW(GPIOD_PIN7)) - -#define VAL_GPIOD_DIR (PIN_DIR_IN(GPIOD_PIN0) | \ - PIN_DIR_IN(GPIOD_PIN1) | \ - PIN_DIR_IN(GPIOD_PIN2) | \ - PIN_DIR_IN(GPIOD_PIN3) | \ - PIN_DIR_IN(GPIOD_PIN4) | \ - PIN_DIR_IN(GPIOD_PIN5) | \ - PIN_DIR_IN(GPIOD_PIN6) | \ - PIN_DIR_IN(GPIOD_PIN7)) - -#define VAL_GPIOD_AFSEL (PIN_AFSEL_GPIO(GPIOD_PIN0) | \ - PIN_AFSEL_GPIO(GPIOD_PIN1) | \ - PIN_AFSEL_GPIO(GPIOD_PIN2) | \ - PIN_AFSEL_GPIO(GPIOD_PIN3) | \ - PIN_AFSEL_GPIO(GPIOD_PIN4) | \ - PIN_AFSEL_GPIO(GPIOD_PIN5) | \ - PIN_AFSEL_GPIO(GPIOD_PIN6) | \ - PIN_AFSEL_GPIO(GPIOD_PIN7)) - -#define VAL_GPIOD_DR2R (PIN_DRxR_ENABLE(GPIOD_PIN0) | \ - PIN_DRxR_ENABLE(GPIOD_PIN1) | \ - PIN_DRxR_ENABLE(GPIOD_PIN2) | \ - PIN_DRxR_ENABLE(GPIOD_PIN3) | \ - PIN_DRxR_ENABLE(GPIOD_PIN4) | \ - PIN_DRxR_ENABLE(GPIOD_PIN5) | \ - PIN_DRxR_ENABLE(GPIOD_PIN6) | \ - PIN_DRxR_ENABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_DR4R (PIN_DRxR_DISABLE(GPIOD_PIN0) | \ - PIN_DRxR_DISABLE(GPIOD_PIN1) | \ - PIN_DRxR_DISABLE(GPIOD_PIN2) | \ - PIN_DRxR_DISABLE(GPIOD_PIN3) | \ - PIN_DRxR_DISABLE(GPIOD_PIN4) | \ - PIN_DRxR_DISABLE(GPIOD_PIN5) | \ - PIN_DRxR_DISABLE(GPIOD_PIN6) | \ - PIN_DRxR_DISABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_DR8R (PIN_DRxR_DISABLE(GPIOD_PIN0) | \ - PIN_DRxR_DISABLE(GPIOD_PIN1) | \ - PIN_DRxR_DISABLE(GPIOD_PIN2) | \ - PIN_DRxR_DISABLE(GPIOD_PIN3) | \ - PIN_DRxR_DISABLE(GPIOD_PIN4) | \ - PIN_DRxR_DISABLE(GPIOD_PIN5) | \ - PIN_DRxR_DISABLE(GPIOD_PIN6) | \ - PIN_DRxR_DISABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_ODR (PIN_ODR_DISABLE(GPIOD_PIN0) | \ - PIN_ODR_DISABLE(GPIOD_PIN1) | \ - PIN_ODR_DISABLE(GPIOD_PIN2) | \ - PIN_ODR_DISABLE(GPIOD_PIN3) | \ - PIN_ODR_DISABLE(GPIOD_PIN4) | \ - PIN_ODR_DISABLE(GPIOD_PIN5) | \ - PIN_ODR_DISABLE(GPIOD_PIN6) | \ - PIN_ODR_DISABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_PUR (PIN_PxR_DISABLE(GPIOD_PIN0) | \ - PIN_PxR_DISABLE(GPIOD_PIN1) | \ - PIN_PxR_DISABLE(GPIOD_PIN2) | \ - PIN_PxR_DISABLE(GPIOD_PIN3) | \ - PIN_PxR_DISABLE(GPIOD_PIN4) | \ - PIN_PxR_DISABLE(GPIOD_PIN5) | \ - PIN_PxR_DISABLE(GPIOD_PIN6) | \ - PIN_PxR_DISABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_PDR (PIN_PxR_DISABLE(GPIOD_PIN0) | \ - PIN_PxR_DISABLE(GPIOD_PIN1) | \ - PIN_PxR_DISABLE(GPIOD_PIN2) | \ - PIN_PxR_DISABLE(GPIOD_PIN3) | \ - PIN_PxR_DISABLE(GPIOD_PIN4) | \ - PIN_PxR_DISABLE(GPIOD_PIN5) | \ - PIN_PxR_DISABLE(GPIOD_PIN6) | \ - PIN_PxR_DISABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_SLR (PIN_SLR_DISABLE(GPIOD_PIN0) | \ - PIN_SLR_DISABLE(GPIOD_PIN1) | \ - PIN_SLR_DISABLE(GPIOD_PIN2) | \ - PIN_SLR_DISABLE(GPIOD_PIN3) | \ - PIN_SLR_DISABLE(GPIOD_PIN4) | \ - PIN_SLR_DISABLE(GPIOD_PIN5) | \ - PIN_SLR_DISABLE(GPIOD_PIN6) | \ - PIN_SLR_DISABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_DEN (PIN_DEN_ENABLE(GPIOD_PIN0) | \ - PIN_DEN_ENABLE(GPIOD_PIN1) | \ - PIN_DEN_ENABLE(GPIOD_PIN2) | \ - PIN_DEN_ENABLE(GPIOD_PIN3) | \ - PIN_DEN_ENABLE(GPIOD_PIN4) | \ - PIN_DEN_ENABLE(GPIOD_PIN5) | \ - PIN_DEN_ENABLE(GPIOD_PIN6) | \ - PIN_DEN_ENABLE(GPIOD_PIN7)) - -#define VAL_GPIOD_AMSEL (PIN_AMSEL_DISABLE(GPIOD_PIN0) | \ - PIN_AMSEL_DISABLE(GPIOD_PIN1) | \ - PIN_AMSEL_DISABLE(GPIOD_PIN2) | \ - PIN_AMSEL_DISABLE(GPIOD_PIN3)) - -#define VAL_GPIOD_PCTL (PIN_PCTL_MODE(GPIOD_PIN0, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN1, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN2, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN3, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN4, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN5, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN6, 0) | \ - PIN_PCTL_MODE(GPIOD_PIN7, 0)) - -/* - * GPIOE Setup: - * - * PE0 - PIN0 () - * PE1 - PIN1 () - * PE2 - PIN2 () - * PE3 - PIN3 () - * PE4 - PIN4 () - * PE5 - PIN5 () - * PE6 - PIN6 () - * PE7 - PIN7 () - */ -#define VAL_GPIOE_DATA (PIN_DATA_LOW(GPIOE_PIN0) | \ - PIN_DATA_LOW(GPIOE_PIN1) | \ - PIN_DATA_LOW(GPIOE_PIN2) | \ - PIN_DATA_LOW(GPIOE_PIN3) | \ - PIN_DATA_LOW(GPIOE_PIN4) | \ - PIN_DATA_LOW(GPIOE_PIN5) | \ - PIN_DATA_LOW(GPIOE_PIN6) | \ - PIN_DATA_LOW(GPIOE_PIN7)) - -#define VAL_GPIOE_DIR (PIN_DIR_IN(GPIOE_PIN0) | \ - PIN_DIR_IN(GPIOE_PIN1) | \ - PIN_DIR_IN(GPIOE_PIN2) | \ - PIN_DIR_IN(GPIOE_PIN3) | \ - PIN_DIR_IN(GPIOE_PIN4) | \ - PIN_DIR_IN(GPIOE_PIN5) | \ - PIN_DIR_IN(GPIOE_PIN6) | \ - PIN_DIR_IN(GPIOE_PIN7)) - -#define VAL_GPIOE_AFSEL (PIN_AFSEL_GPIO(GPIOE_PIN0) | \ - PIN_AFSEL_GPIO(GPIOE_PIN1) | \ - PIN_AFSEL_GPIO(GPIOE_PIN2) | \ - PIN_AFSEL_GPIO(GPIOE_PIN3) | \ - PIN_AFSEL_GPIO(GPIOE_PIN4) | \ - PIN_AFSEL_GPIO(GPIOE_PIN5) | \ - PIN_AFSEL_GPIO(GPIOE_PIN6) | \ - PIN_AFSEL_GPIO(GPIOE_PIN7)) - -#define VAL_GPIOE_DR2R (PIN_DRxR_ENABLE(GPIOE_PIN0) | \ - PIN_DRxR_ENABLE(GPIOE_PIN1) | \ - PIN_DRxR_ENABLE(GPIOE_PIN2) | \ - PIN_DRxR_ENABLE(GPIOE_PIN3) | \ - PIN_DRxR_ENABLE(GPIOE_PIN4) | \ - PIN_DRxR_ENABLE(GPIOE_PIN5) | \ - PIN_DRxR_ENABLE(GPIOE_PIN6) | \ - PIN_DRxR_ENABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_DR4R (PIN_DRxR_DISABLE(GPIOE_PIN0) | \ - PIN_DRxR_DISABLE(GPIOE_PIN1) | \ - PIN_DRxR_DISABLE(GPIOE_PIN2) | \ - PIN_DRxR_DISABLE(GPIOE_PIN3) | \ - PIN_DRxR_DISABLE(GPIOE_PIN4) | \ - PIN_DRxR_DISABLE(GPIOE_PIN5) | \ - PIN_DRxR_DISABLE(GPIOE_PIN6) | \ - PIN_DRxR_DISABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_DR8R (PIN_DRxR_DISABLE(GPIOE_PIN0) | \ - PIN_DRxR_DISABLE(GPIOE_PIN1) | \ - PIN_DRxR_DISABLE(GPIOE_PIN2) | \ - PIN_DRxR_DISABLE(GPIOE_PIN3) | \ - PIN_DRxR_DISABLE(GPIOE_PIN4) | \ - PIN_DRxR_DISABLE(GPIOE_PIN5) | \ - PIN_DRxR_DISABLE(GPIOE_PIN6) | \ - PIN_DRxR_DISABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_ODR (PIN_ODR_DISABLE(GPIOE_PIN0) | \ - PIN_ODR_DISABLE(GPIOE_PIN1) | \ - PIN_ODR_DISABLE(GPIOE_PIN2) | \ - PIN_ODR_DISABLE(GPIOE_PIN3) | \ - PIN_ODR_DISABLE(GPIOE_PIN4) | \ - PIN_ODR_DISABLE(GPIOE_PIN5) | \ - PIN_ODR_DISABLE(GPIOE_PIN6) | \ - PIN_ODR_DISABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_PUR (PIN_PxR_DISABLE(GPIOE_PIN0) | \ - PIN_PxR_DISABLE(GPIOE_PIN1) | \ - PIN_PxR_DISABLE(GPIOE_PIN2) | \ - PIN_PxR_DISABLE(GPIOE_PIN3) | \ - PIN_PxR_DISABLE(GPIOE_PIN4) | \ - PIN_PxR_DISABLE(GPIOE_PIN5) | \ - PIN_PxR_DISABLE(GPIOE_PIN6) | \ - PIN_PxR_DISABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_PDR (PIN_PxR_DISABLE(GPIOE_PIN0) | \ - PIN_PxR_DISABLE(GPIOE_PIN1) | \ - PIN_PxR_DISABLE(GPIOE_PIN2) | \ - PIN_PxR_DISABLE(GPIOE_PIN3) | \ - PIN_PxR_DISABLE(GPIOE_PIN4) | \ - PIN_PxR_DISABLE(GPIOE_PIN5) | \ - PIN_PxR_DISABLE(GPIOE_PIN6) | \ - PIN_PxR_DISABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_SLR (PIN_SLR_DISABLE(GPIOE_PIN0) | \ - PIN_SLR_DISABLE(GPIOE_PIN1) | \ - PIN_SLR_DISABLE(GPIOE_PIN2) | \ - PIN_SLR_DISABLE(GPIOE_PIN3) | \ - PIN_SLR_DISABLE(GPIOE_PIN4) | \ - PIN_SLR_DISABLE(GPIOE_PIN5) | \ - PIN_SLR_DISABLE(GPIOE_PIN6) | \ - PIN_SLR_DISABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_DEN (PIN_DEN_ENABLE(GPIOE_PIN0) | \ - PIN_DEN_ENABLE(GPIOE_PIN1) | \ - PIN_DEN_ENABLE(GPIOE_PIN2) | \ - PIN_DEN_ENABLE(GPIOE_PIN3) | \ - PIN_DEN_ENABLE(GPIOE_PIN4) | \ - PIN_DEN_ENABLE(GPIOE_PIN5) | \ - PIN_DEN_ENABLE(GPIOE_PIN6) | \ - PIN_DEN_ENABLE(GPIOE_PIN7)) - -#define VAL_GPIOE_AMSEL (PIN_AMSEL_DISABLE(GPIOE_PIN0) | \ - PIN_AMSEL_DISABLE(GPIOE_PIN1) | \ - PIN_AMSEL_DISABLE(GPIOE_PIN2) | \ - PIN_AMSEL_DISABLE(GPIOE_PIN3)) - -#define VAL_GPIOE_PCTL (PIN_PCTL_MODE(GPIOE_PIN0, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN1, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN2, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN3, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN4, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN5, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN6, 0) | \ - PIN_PCTL_MODE(GPIOE_PIN7, 0)) - -/* - * GPIOF Setup: - * - * PF0 - SW2 () - * PF1 - LED_RED () - * PF2 - LED_BLUE () - * PF3 - LED_GREEN () - * PF4 - SW1 () - * PF5 - PIN5 () - * PF6 - PIN6 () - * PF7 - PIN7 () - */ - -#define VAL_GPIOF_DATA (PIN_DATA_LOW(GPIOF_SW2) | \ - PIN_DATA_LOW(GPIOF_LED_RED) | \ - PIN_DATA_LOW(GPIOF_LED_BLUE) | \ - PIN_DATA_LOW(GPIOF_LED_GREEN) | \ - PIN_DATA_LOW(GPIOF_SW1) | \ - PIN_DATA_LOW(GPIOF_PIN5) | \ - PIN_DATA_LOW(GPIOF_PIN6) | \ - PIN_DATA_LOW(GPIOF_PIN7)) - -#define VAL_GPIOF_DIR (PIN_DIR_IN(GPIOF_SW2) | \ - PIN_DIR_IN(GPIOF_LED_RED) | \ - PIN_DIR_IN(GPIOF_LED_BLUE) | \ - PIN_DIR_IN(GPIOF_LED_GREEN) | \ - PIN_DIR_IN(GPIOF_SW1) | \ - PIN_DIR_IN(GPIOF_PIN5) | \ - PIN_DIR_IN(GPIOF_PIN6) | \ - PIN_DIR_IN(GPIOF_PIN7)) - -#define VAL_GPIOF_AFSEL (PIN_AFSEL_GPIO(GPIOF_SW2) | \ - PIN_AFSEL_GPIO(GPIOF_LED_RED) | \ - PIN_AFSEL_GPIO(GPIOF_LED_BLUE) | \ - PIN_AFSEL_GPIO(GPIOF_LED_GREEN) | \ - PIN_AFSEL_GPIO(GPIOF_SW1) | \ - PIN_AFSEL_GPIO(GPIOF_PIN5) | \ - PIN_AFSEL_GPIO(GPIOF_PIN6) | \ - PIN_AFSEL_GPIO(GPIOF_PIN7)) - -#define VAL_GPIOF_DR2R (PIN_DRxR_ENABLE(GPIOF_SW2) | \ - PIN_DRxR_ENABLE(GPIOF_LED_RED) | \ - PIN_DRxR_ENABLE(GPIOF_LED_BLUE) | \ - PIN_DRxR_ENABLE(GPIOF_LED_GREEN) | \ - PIN_DRxR_ENABLE(GPIOF_SW1) | \ - PIN_DRxR_ENABLE(GPIOF_PIN5) | \ - PIN_DRxR_ENABLE(GPIOF_PIN6) | \ - PIN_DRxR_ENABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_DR4R (PIN_DRxR_DISABLE(GPIOF_SW2) | \ - PIN_DRxR_DISABLE(GPIOF_LED_RED) | \ - PIN_DRxR_DISABLE(GPIOF_LED_BLUE) | \ - PIN_DRxR_DISABLE(GPIOF_LED_GREEN) | \ - PIN_DRxR_DISABLE(GPIOF_SW1) | \ - PIN_DRxR_DISABLE(GPIOF_PIN5) | \ - PIN_DRxR_DISABLE(GPIOF_PIN6) | \ - PIN_DRxR_DISABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_DR8R (PIN_DRxR_DISABLE(GPIOF_SW2) | \ - PIN_DRxR_DISABLE(GPIOF_LED_RED) | \ - PIN_DRxR_DISABLE(GPIOF_LED_BLUE) | \ - PIN_DRxR_DISABLE(GPIOF_LED_GREEN) | \ - PIN_DRxR_DISABLE(GPIOF_SW1) | \ - PIN_DRxR_DISABLE(GPIOF_PIN5) | \ - PIN_DRxR_DISABLE(GPIOF_PIN6) | \ - PIN_DRxR_DISABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_ODR (PIN_ODR_DISABLE(GPIOF_SW2) | \ - PIN_ODR_DISABLE(GPIOF_LED_RED) | \ - PIN_ODR_DISABLE(GPIOF_LED_BLUE) | \ - PIN_ODR_DISABLE(GPIOF_LED_GREEN) | \ - PIN_ODR_DISABLE(GPIOF_SW1) | \ - PIN_ODR_DISABLE(GPIOF_PIN5) | \ - PIN_ODR_DISABLE(GPIOF_PIN6) | \ - PIN_ODR_DISABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_PUR (PIN_PxR_DISABLE(GPIOF_SW2) | \ - PIN_PxR_DISABLE(GPIOF_LED_RED) | \ - PIN_PxR_DISABLE(GPIOF_LED_BLUE) | \ - PIN_PxR_DISABLE(GPIOF_LED_GREEN) | \ - PIN_PxR_DISABLE(GPIOF_SW1) | \ - PIN_PxR_DISABLE(GPIOF_PIN5) | \ - PIN_PxR_DISABLE(GPIOF_PIN6) | \ - PIN_PxR_DISABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_PDR (PIN_PxR_DISABLE(GPIOF_SW2) | \ - PIN_PxR_DISABLE(GPIOF_LED_RED) | \ - PIN_PxR_DISABLE(GPIOF_LED_BLUE) | \ - PIN_PxR_DISABLE(GPIOF_LED_GREEN) | \ - PIN_PxR_DISABLE(GPIOF_SW1) | \ - PIN_PxR_DISABLE(GPIOF_PIN5) | \ - PIN_PxR_DISABLE(GPIOF_PIN6) | \ - PIN_PxR_DISABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_SLR (PIN_SLR_DISABLE(GPIOF_SW2) | \ - PIN_SLR_DISABLE(GPIOF_LED_RED) | \ - PIN_SLR_DISABLE(GPIOF_LED_BLUE) | \ - PIN_SLR_DISABLE(GPIOF_LED_GREEN) | \ - PIN_SLR_DISABLE(GPIOF_SW1) | \ - PIN_SLR_DISABLE(GPIOF_PIN5) | \ - PIN_SLR_DISABLE(GPIOF_PIN6) | \ - PIN_SLR_DISABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_DEN (PIN_DEN_ENABLE(GPIOF_SW2) | \ - PIN_DEN_ENABLE(GPIOF_LED_RED) | \ - PIN_DEN_ENABLE(GPIOF_LED_BLUE) | \ - PIN_DEN_ENABLE(GPIOF_LED_GREEN) | \ - PIN_DEN_ENABLE(GPIOF_SW1) | \ - PIN_DEN_ENABLE(GPIOF_PIN5) | \ - PIN_DEN_ENABLE(GPIOF_PIN6) | \ - PIN_DEN_ENABLE(GPIOF_PIN7)) - -#define VAL_GPIOF_AMSEL (PIN_AMSEL_DISABLE(GPIOF_SW2) | \ - PIN_AMSEL_DISABLE(GPIOF_LED_RED) | \ - PIN_AMSEL_DISABLE(GPIOF_LED_BLUE) | \ - PIN_AMSEL_DISABLE(GPIOF_LED_GREEN)) - -#define VAL_GPIOF_PCTL (PIN_PCTL_MODE(GPIOF_SW2, 0) | \ - PIN_PCTL_MODE(GPIOF_LED_RED, 0) | \ - PIN_PCTL_MODE(GPIOF_LED_BLUE, 0) | \ - PIN_PCTL_MODE(GPIOF_LED_GREEN, 0) | \ - PIN_PCTL_MODE(GPIOF_SW1, 0) | \ - PIN_PCTL_MODE(GPIOF_PIN5, 0) | \ - PIN_PCTL_MODE(GPIOF_PIN6, 0) | \ - PIN_PCTL_MODE(GPIOF_PIN7, 0)) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk deleted file mode 100644 index 8232a30..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/TI_TM4C123G_LAUNCHPAD diff --git a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c b/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c deleted file mode 100644 index 437dcf8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOA_DATA, VAL_GPIOA_DIR, VAL_GPIOA_AFSEL, VAL_GPIOA_DR2R, - VAL_GPIOA_DR4R, VAL_GPIOA_DR8R, VAL_GPIOA_ODR, VAL_GPIOA_PUR, - VAL_GPIOA_PDR, VAL_GPIOA_SLR, VAL_GPIOA_DEN, VAL_GPIOA_AMSEL, - VAL_GPIOA_PCTL}, - {VAL_GPIOB_DATA, VAL_GPIOB_DIR, VAL_GPIOB_AFSEL, VAL_GPIOB_DR2R, - VAL_GPIOB_DR4R, VAL_GPIOB_DR8R, VAL_GPIOB_ODR, VAL_GPIOB_PUR, - VAL_GPIOB_PDR, VAL_GPIOB_SLR, VAL_GPIOB_DEN, VAL_GPIOB_AMSEL, - VAL_GPIOB_PCTL}, - {VAL_GPIOC_DATA, VAL_GPIOC_DIR, VAL_GPIOC_AFSEL, VAL_GPIOC_DR2R, - VAL_GPIOC_DR4R, VAL_GPIOC_DR8R, VAL_GPIOC_ODR, VAL_GPIOC_PUR, - VAL_GPIOC_PDR, VAL_GPIOC_SLR, VAL_GPIOC_DEN, VAL_GPIOC_AMSEL, - VAL_GPIOC_PCTL}, - {VAL_GPIOD_DATA, VAL_GPIOD_DIR, VAL_GPIOD_AFSEL, VAL_GPIOD_DR2R, - VAL_GPIOD_DR4R, VAL_GPIOD_DR8R, VAL_GPIOD_ODR, VAL_GPIOD_PUR, - VAL_GPIOD_PDR, VAL_GPIOD_SLR, VAL_GPIOD_DEN, VAL_GPIOD_AMSEL, - VAL_GPIOD_PCTL}, - {VAL_GPIOE_DATA, VAL_GPIOE_DIR, VAL_GPIOE_AFSEL, VAL_GPIOE_DR2R, - VAL_GPIOE_DR4R, VAL_GPIOE_DR8R, VAL_GPIOE_ODR, VAL_GPIOE_PUR, - VAL_GPIOE_PDR, VAL_GPIOE_SLR, VAL_GPIOE_DEN, VAL_GPIOE_AMSEL, - VAL_GPIOE_PCTL}, - {VAL_GPIOF_DATA, VAL_GPIOF_DIR, VAL_GPIOF_AFSEL, VAL_GPIOF_DR2R, - VAL_GPIOF_DR4R, VAL_GPIOF_DR8R, VAL_GPIOF_ODR, VAL_GPIOF_PUR, - VAL_GPIOF_PDR, VAL_GPIOF_SLR, VAL_GPIOF_DEN, VAL_GPIOF_AMSEL, - VAL_GPIOF_PCTL}, - {VAL_GPIOG_DATA, VAL_GPIOG_DIR, VAL_GPIOG_AFSEL, VAL_GPIOG_DR2R, - VAL_GPIOG_DR4R, VAL_GPIOG_DR8R, VAL_GPIOG_ODR, VAL_GPIOG_PUR, - VAL_GPIOG_PDR, VAL_GPIOG_SLR, VAL_GPIOG_DEN, VAL_GPIOG_AMSEL, - VAL_GPIOG_PCTL}, - {VAL_GPIOH_DATA, VAL_GPIOH_DIR, VAL_GPIOH_AFSEL, VAL_GPIOH_DR2R, - VAL_GPIOH_DR4R, VAL_GPIOH_DR8R, VAL_GPIOH_ODR, VAL_GPIOH_PUR, - VAL_GPIOH_PDR, VAL_GPIOH_SLR, VAL_GPIOH_DEN, VAL_GPIOH_AMSEL, - VAL_GPIOH_PCTL}, - {VAL_GPIOJ_DATA, VAL_GPIOJ_DIR, VAL_GPIOJ_AFSEL, VAL_GPIOJ_DR2R, - VAL_GPIOJ_DR4R, VAL_GPIOJ_DR8R, VAL_GPIOJ_ODR, VAL_GPIOJ_PUR, - VAL_GPIOJ_PDR, VAL_GPIOJ_SLR, VAL_GPIOJ_DEN, VAL_GPIOJ_AMSEL, - VAL_GPIOJ_PCTL}, - {VAL_GPIOK_DATA, VAL_GPIOK_DIR, VAL_GPIOK_AFSEL, VAL_GPIOK_DR2R, - VAL_GPIOK_DR4R, VAL_GPIOK_DR8R, VAL_GPIOK_ODR, VAL_GPIOK_PUR, - VAL_GPIOK_PDR, VAL_GPIOK_SLR, VAL_GPIOK_DEN, VAL_GPIOK_AMSEL, - VAL_GPIOK_PCTL}, - {VAL_GPIOL_DATA, VAL_GPIOL_DIR, VAL_GPIOL_AFSEL, VAL_GPIOL_DR2R, - VAL_GPIOL_DR4R, VAL_GPIOL_DR8R, VAL_GPIOL_ODR, VAL_GPIOL_PUR, - VAL_GPIOL_PDR, VAL_GPIOL_SLR, VAL_GPIOL_DEN, VAL_GPIOL_AMSEL, - VAL_GPIOL_PCTL}, - {VAL_GPIOM_DATA, VAL_GPIOM_DIR, VAL_GPIOM_AFSEL, VAL_GPIOM_DR2R, - VAL_GPIOM_DR4R, VAL_GPIOM_DR8R, VAL_GPIOM_ODR, VAL_GPIOM_PUR, - VAL_GPIOM_PDR, VAL_GPIOM_SLR, VAL_GPIOM_DEN, VAL_GPIOM_AMSEL, - VAL_GPIOM_PCTL}, - {VAL_GPION_DATA, VAL_GPION_DIR, VAL_GPION_AFSEL, VAL_GPION_DR2R, - VAL_GPION_DR4R, VAL_GPION_DR8R, VAL_GPION_ODR, VAL_GPION_PUR, - VAL_GPION_PDR, VAL_GPION_SLR, VAL_GPION_DEN, VAL_GPION_AMSEL, - VAL_GPION_PCTL}, - {VAL_GPIOP_DATA, VAL_GPIOP_DIR, VAL_GPIOP_AFSEL, VAL_GPIOP_DR2R, - VAL_GPIOP_DR4R, VAL_GPIOP_DR8R, VAL_GPIOP_ODR, VAL_GPIOP_PUR, - VAL_GPIOP_PDR, VAL_GPIOP_SLR, VAL_GPIOP_DEN, VAL_GPIOP_AMSEL, - VAL_GPIOP_PCTL}, - {VAL_GPIOQ_DATA, VAL_GPIOQ_DIR, VAL_GPIOQ_AFSEL, VAL_GPIOQ_DR2R, - VAL_GPIOQ_DR4R, VAL_GPIOQ_DR8R, VAL_GPIOQ_ODR, VAL_GPIOQ_PUR, - VAL_GPIOQ_PDR, VAL_GPIOQ_SLR, VAL_GPIOQ_DEN, VAL_GPIOQ_AMSEL, - VAL_GPIOQ_PCTL} -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization is performed just after reset before BSS and - * DATA segments initialization. - */ -void __early_init(void) { - tiva_clock_init(); -} - -/** - * @brief Late initialization code. - * @note This initialization is performed after BSS and DATA segments - * initialization and before invoking the main() function. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h b/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h deleted file mode 100644 index 08bb36f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h +++ /dev/null @@ -1,429 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for Texas Instruments TM4C1294 Launchpad Board. - */ - -/* - * Board identifier. - */ -#define BOARD_TI_TM4C1294_LAUNCHPAD -#define BOARD_NAME "Texas Instruments TM4C1294 Launchpad" - -/* - * Ethernet PHY type. - */ -#define BOARD_PHY_ADDR 0 /* 0 is internal PHY */ -#define BOARD_PHY_ID 0x2000A221 /* internal PHY ID */ -/* uncomment when using RMII */ -//#define BOARD_PHY_RMII - -/* - * MCU type - */ -//#define TM4C1290NCPDT -//#define TM4C1290NCZAD -//#define TM4C1292NCPDT -//#define TM4C1292NCZAD -//#define TM4C1294KCPDT -#define TM4C1294NCPDT -//#define TM4C1294NCZAD -//#define TM4C1297NCZAD -//#define TM4C1299KCZAD -//#define TM4C1299NCZAD -//#define TM4C129CNCPDT -//#define TM4C129CNCZAD -//#define TM4C129DNCPDT -//#define TM4C129DNCZAD -//#define TM4C129EKCPDT -//#define TM4C129ENCPDT -//#define TM4C129ENCZAD -//#define TM4C129LNCZAD -//#define TM4C129XKCZAD -//#define TM4C129XNCZAD - -/* - * Board oscillators-related settings. - */ -#define TIVA_XTAL_VALUE 25000000 - -/* - * IO pins assignments. - */ -#define GPIOA_UART0_RX 0 -#define GPIOA_UART0_TX 1 -#define GPIOA_PIN2 2 -#define GPIOA_PIN3 3 -#define GPIOA_PIN4 4 -#define GPIOA_PIN5 5 -#define GPIOA_PIN6 6 -#define GPIOA_PIN7 7 - -#define GPIOB_PIN0 0 -#define GPIOB_PIN1 1 -#define GPIOB_PIN2 2 -#define GPIOB_PIN3 3 -#define GPIOB_PIN4 4 -#define GPIOB_PIN5 5 -#define GPIOB_PIN6 6 -#define GPIOB_PIN7 7 - -#define GPIOC_TCK_SWCLK 0 -#define GPIOC_TMS_SWDIO 1 -#define GPIOC_TDI 2 -#define GPIOC_TDO_SWO 3 -#define GPIOC_PIN4 4 -#define GPIOC_PIN5 5 -#define GPIOC_PIN6 6 -#define GPIOC_PIN7 7 - -#define GPIOD_PIN0 0 -#define GPIOD_PIN1 1 -#define GPIOD_PIN2 2 -#define GPIOD_PIN3 3 -#define GPIOD_PIN4 4 -#define GPIOD_PIN5 5 -#define GPIOD_PIN6 6 -#define GPIOD_PIN7 7 - -#define GPIOE_PIN0 0 -#define GPIOE_PIN1 1 -#define GPIOE_PIN2 2 -#define GPIOE_PIN3 3 -#define GPIOE_PIN4 4 -#define GPIOE_PIN5 5 -#define GPIOE_PIN6 6 -#define GPIOE_PIN7 7 - -#define GPIOF_LED0 0 -#define GPIOF_PIN1 1 -#define GPIOF_PIN2 2 -#define GPIOF_PIN3 3 -#define GPIOF_LED1 4 -#define GPIOF_PIN5 5 -#define GPIOF_PIN6 6 -#define GPIOF_PIN7 7 - -#define GPIOG_PIN0 0 -#define GPIOG_PIN1 1 -#define GPIOG_PIN2 2 -#define GPIOG_PIN3 3 -#define GPIOG_PIN4 4 -#define GPIOG_PIN5 5 -#define GPIOG_PIN6 6 -#define GPIOG_PIN7 7 - -#define GPIOH_PIN0 0 -#define GPIOH_PIN1 1 -#define GPIOH_PIN2 2 -#define GPIOH_PIN3 3 -#define GPIOH_PIN4 4 -#define GPIOH_PIN5 5 -#define GPIOH_PIN6 6 -#define GPIOH_PIN7 7 - -#define GPIOJ_SW1 0 -#define GPIOJ_PIN1 1 -#define GPIOJ_PIN2 2 -#define GPIOJ_PIN3 3 -#define GPIOJ_PIN4 4 -#define GPIOJ_PIN5 5 -#define GPIOJ_PIN6 6 -#define GPIOJ_PIN7 7 - -#define GPIOK_PIN0 0 -#define GPIOK_PIN1 1 -#define GPIOK_PIN2 2 -#define GPIOK_PIN3 3 -#define GPIOK_PIN4 4 -#define GPIOK_PIN5 5 -#define GPIOK_PIN6 6 -#define GPIOK_PIN7 7 - -#define GPIOL_PIN0 0 -#define GPIOL_PIN1 1 -#define GPIOL_PIN2 2 -#define GPIOL_PIN3 3 -#define GPIOL_PIN4 4 -#define GPIOL_PIN5 5 -#define GPIOL_PIN6 6 -#define GPIOL_PIN7 7 - -#define GPIOM_PIN0 0 -#define GPIOM_PIN1 1 -#define GPIOM_PIN2 2 -#define GPIOM_PIN3 3 -#define GPIOM_PIN4 4 -#define GPIOM_PIN5 5 -#define GPIOM_PIN6 6 -#define GPIOM_PIN7 7 - -#define GPION_LED2 0 -#define GPION_LED3 1 -#define GPION_PIN2 2 -#define GPION_PIN3 3 -#define GPION_PIN4 4 -#define GPION_PIN5 5 -#define GPION_PIN6 6 -#define GPION_PIN7 7 - -#define GPIOP_PIN0 0 -#define GPIOP_PIN1 1 -#define GPIOP_PIN2 2 -#define GPIOP_PIN3 3 -#define GPIOP_PIN4 4 -#define GPIOP_PIN5 5 -#define GPIOP_PIN6 6 -#define GPIOP_PIN7 7 - -#define GPIOQ_PIN0 0 -#define GPIOQ_PIN1 1 -#define GPIOQ_PIN2 2 -#define GPIOQ_PIN3 3 -#define GPIOQ_PIN4 4 -#define GPIOQ_PIN5 5 -#define GPIOQ_PIN6 6 -#define GPIOQ_PIN7 7 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - */ -#define VAL_GPIOA_DATA 0b00000000 -#define VAL_GPIOA_DIR 0b00000000 -#define VAL_GPIOA_AFSEL 0b00000000 -#define VAL_GPIOA_DR2R 0b11111111 -#define VAL_GPIOA_DR4R 0b00000000 -#define VAL_GPIOA_DR8R 0b00000000 -#define VAL_GPIOA_ODR 0b00000000 -#define VAL_GPIOA_PUR 0b00000000 -#define VAL_GPIOA_PDR 0b00000000 -#define VAL_GPIOA_SLR 0b00000000 -#define VAL_GPIOA_DEN 0b11111111 -#define VAL_GPIOA_AMSEL 0b0000 -#define VAL_GPIOA_PCTL 0x00000000 - -#define VAL_GPIOB_DATA 0b00000000 -#define VAL_GPIOB_DIR 0b00000000 -#define VAL_GPIOB_AFSEL 0b00000000 -#define VAL_GPIOB_DR2R 0b11111111 -#define VAL_GPIOB_DR4R 0b00000000 -#define VAL_GPIOB_DR8R 0b00000000 -#define VAL_GPIOB_ODR 0b00000000 -#define VAL_GPIOB_PUR 0b00000000 -#define VAL_GPIOB_PDR 0b00000000 -#define VAL_GPIOB_SLR 0b00000000 -#define VAL_GPIOB_DEN 0b11111111 -#define VAL_GPIOB_AMSEL 0b0000 -#define VAL_GPIOB_PCTL 0x00000000 - -#define VAL_GPIOC_DATA 0b00000000 -#define VAL_GPIOC_DIR 0b00001000 -#define VAL_GPIOC_AFSEL 0b00001111 -#define VAL_GPIOC_DR2R 0b11111111 -#define VAL_GPIOC_DR4R 0b00000000 -#define VAL_GPIOC_DR8R 0b00000000 -#define VAL_GPIOC_ODR 0b00000000 -#define VAL_GPIOC_PUR 0b00001111 -#define VAL_GPIOC_PDR 0b00000000 -#define VAL_GPIOC_SLR 0b00000000 -#define VAL_GPIOC_DEN 0b11111111 -#define VAL_GPIOC_AMSEL 0b0000 -#define VAL_GPIOC_PCTL 0x00001111 - -#define VAL_GPIOD_DATA 0b00000000 -#define VAL_GPIOD_DIR 0b00000000 -#define VAL_GPIOD_AFSEL 0b00000000 -#define VAL_GPIOD_DR2R 0b11111111 -#define VAL_GPIOD_DR4R 0b00000000 -#define VAL_GPIOD_DR8R 0b00000000 -#define VAL_GPIOD_ODR 0b00000000 -#define VAL_GPIOD_PUR 0b00000000 -#define VAL_GPIOD_PDR 0b00000000 -#define VAL_GPIOD_SLR 0b00000000 -#define VAL_GPIOD_DEN 0b11111111 -#define VAL_GPIOD_AMSEL 0b0000 -#define VAL_GPIOD_PCTL 0x00000000 - -#define VAL_GPIOE_DATA 0b00000000 -#define VAL_GPIOE_DIR 0b00000000 -#define VAL_GPIOE_AFSEL 0b00000000 -#define VAL_GPIOE_DR2R 0b11111111 -#define VAL_GPIOE_DR4R 0b00000000 -#define VAL_GPIOE_DR8R 0b00000000 -#define VAL_GPIOE_ODR 0b00000000 -#define VAL_GPIOE_PUR 0b00000000 -#define VAL_GPIOE_PDR 0b00000000 -#define VAL_GPIOE_SLR 0b00000000 -#define VAL_GPIOE_DEN 0b11111111 -#define VAL_GPIOE_AMSEL 0b0000 -#define VAL_GPIOE_PCTL 0x00000000 - -#define VAL_GPIOF_DATA 0b00000000 -#define VAL_GPIOF_DIR 0b00000000 -#define VAL_GPIOF_AFSEL 0b00000000 -#define VAL_GPIOF_DR2R 0b11111111 -#define VAL_GPIOF_DR4R 0b00000000 -#define VAL_GPIOF_DR8R 0b00000000 -#define VAL_GPIOF_ODR 0b00000000 -#define VAL_GPIOF_PUR 0b00000000 -#define VAL_GPIOF_PDR 0b00000000 -#define VAL_GPIOF_SLR 0b00000000 -#define VAL_GPIOF_DEN 0b11111111 -#define VAL_GPIOF_AMSEL 0b0000 -#define VAL_GPIOF_PCTL 0x00000000 - -#define VAL_GPIOG_DATA 0b00000000 -#define VAL_GPIOG_DIR 0b00000000 -#define VAL_GPIOG_AFSEL 0b00000000 -#define VAL_GPIOG_DR2R 0b11111111 -#define VAL_GPIOG_DR4R 0b00000000 -#define VAL_GPIOG_DR8R 0b00000000 -#define VAL_GPIOG_ODR 0b00000000 -#define VAL_GPIOG_PUR 0b00000000 -#define VAL_GPIOG_PDR 0b00000000 -#define VAL_GPIOG_SLR 0b00000000 -#define VAL_GPIOG_DEN 0b11111111 -#define VAL_GPIOG_AMSEL 0b0000 -#define VAL_GPIOG_PCTL 0x00000000 - -#define VAL_GPIOH_DATA 0b00000000 -#define VAL_GPIOH_DIR 0b00000000 -#define VAL_GPIOH_AFSEL 0b00000000 -#define VAL_GPIOH_DR2R 0b11111111 -#define VAL_GPIOH_DR4R 0b00000000 -#define VAL_GPIOH_DR8R 0b00000000 -#define VAL_GPIOH_ODR 0b00000000 -#define VAL_GPIOH_PUR 0b00000000 -#define VAL_GPIOH_PDR 0b00000000 -#define VAL_GPIOH_SLR 0b00000000 -#define VAL_GPIOH_DEN 0b11111111 -#define VAL_GPIOH_AMSEL 0b0000 -#define VAL_GPIOH_PCTL 0x00000000 - -#define VAL_GPIOJ_DATA 0b00000000 -#define VAL_GPIOJ_DIR 0b00000000 -#define VAL_GPIOJ_AFSEL 0b00000000 -#define VAL_GPIOJ_DR2R 0b11111111 -#define VAL_GPIOJ_DR4R 0b00000000 -#define VAL_GPIOJ_DR8R 0b00000000 -#define VAL_GPIOJ_ODR 0b00000000 -#define VAL_GPIOJ_PUR 0b00000001 -#define VAL_GPIOJ_PDR 0b00000000 -#define VAL_GPIOJ_SLR 0b00000000 -#define VAL_GPIOJ_DEN 0b11111111 -#define VAL_GPIOJ_AMSEL 0b0000 -#define VAL_GPIOJ_PCTL 0x00000000 - -#define VAL_GPIOK_DATA 0b00000000 -#define VAL_GPIOK_DIR 0b00000000 -#define VAL_GPIOK_AFSEL 0b00000000 -#define VAL_GPIOK_DR2R 0b11111111 -#define VAL_GPIOK_DR4R 0b00000000 -#define VAL_GPIOK_DR8R 0b00000000 -#define VAL_GPIOK_ODR 0b00000000 -#define VAL_GPIOK_PUR 0b00000000 -#define VAL_GPIOK_PDR 0b00000000 -#define VAL_GPIOK_SLR 0b00000000 -#define VAL_GPIOK_DEN 0b11111111 -#define VAL_GPIOK_AMSEL 0b0000 -#define VAL_GPIOK_PCTL 0x00000000 - -#define VAL_GPIOL_DATA 0b00000000 -#define VAL_GPIOL_DIR 0b00000000 -#define VAL_GPIOL_AFSEL 0b00000000 -#define VAL_GPIOL_DR2R 0b11111111 -#define VAL_GPIOL_DR4R 0b00000000 -#define VAL_GPIOL_DR8R 0b00000000 -#define VAL_GPIOL_ODR 0b00000000 -#define VAL_GPIOL_PUR 0b00000000 -#define VAL_GPIOL_PDR 0b00000000 -#define VAL_GPIOL_SLR 0b00000000 -#define VAL_GPIOL_DEN 0b11111111 -#define VAL_GPIOL_AMSEL 0b0000 -#define VAL_GPIOL_PCTL 0x00000000 - -#define VAL_GPIOM_DATA 0b00000000 -#define VAL_GPIOM_DIR 0b00000000 -#define VAL_GPIOM_AFSEL 0b00000000 -#define VAL_GPIOM_DR2R 0b11111111 -#define VAL_GPIOM_DR4R 0b00000000 -#define VAL_GPIOM_DR8R 0b00000000 -#define VAL_GPIOM_ODR 0b00000000 -#define VAL_GPIOM_PUR 0b00000000 -#define VAL_GPIOM_PDR 0b00000000 -#define VAL_GPIOM_SLR 0b00000000 -#define VAL_GPIOM_DEN 0b11111111 -#define VAL_GPIOM_AMSEL 0b0000 -#define VAL_GPIOM_PCTL 0x00000000 - -#define VAL_GPION_DATA 0b00000000 -#define VAL_GPION_DIR 0b00000000 -#define VAL_GPION_AFSEL 0b00000000 -#define VAL_GPION_DR2R 0b11111111 -#define VAL_GPION_DR4R 0b00000000 -#define VAL_GPION_DR8R 0b00000000 -#define VAL_GPION_ODR 0b00000000 -#define VAL_GPION_PUR 0b00000000 -#define VAL_GPION_PDR 0b00000000 -#define VAL_GPION_SLR 0b00000000 -#define VAL_GPION_DEN 0b11111111 -#define VAL_GPION_AMSEL 0b0000 -#define VAL_GPION_PCTL 0x00000000 - -#define VAL_GPIOP_DATA 0b00000000 -#define VAL_GPIOP_DIR 0b00000000 -#define VAL_GPIOP_AFSEL 0b00000000 -#define VAL_GPIOP_DR2R 0b11111111 -#define VAL_GPIOP_DR4R 0b00000000 -#define VAL_GPIOP_DR8R 0b00000000 -#define VAL_GPIOP_ODR 0b00000000 -#define VAL_GPIOP_PUR 0b00000000 -#define VAL_GPIOP_PDR 0b00000000 -#define VAL_GPIOP_SLR 0b00000000 -#define VAL_GPIOP_DEN 0b11111111 -#define VAL_GPIOP_AMSEL 0b0000 -#define VAL_GPIOP_PCTL 0x00000000 - -#define VAL_GPIOQ_DATA 0b00000000 -#define VAL_GPIOQ_DIR 0b00000000 -#define VAL_GPIOQ_AFSEL 0b00000000 -#define VAL_GPIOQ_DR2R 0b11111111 -#define VAL_GPIOQ_DR4R 0b00000000 -#define VAL_GPIOQ_DR8R 0b00000000 -#define VAL_GPIOQ_ODR 0b00000000 -#define VAL_GPIOQ_PUR 0b00000000 -#define VAL_GPIOQ_PDR 0b00000000 -#define VAL_GPIOQ_SLR 0b00000000 -#define VAL_GPIOQ_DEN 0b11111111 -#define VAL_GPIOQ_AMSEL 0b0000 -#define VAL_GPIOQ_PCTL 0x00000000 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk deleted file mode 100644 index 56298eb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/TI_TM4C1294_LAUNCHPAD diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c deleted file mode 100644 index 9bae7ab..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .pads = { - PAL_MODE_OUTPUT_OPENDRAIN, /* P0.0: SDA */ - PAL_MODE_OUTPUT_OPENDRAIN, /* P0.1: SCL */ - PAL_MODE_UNCONNECTED, /* P0.2 */ - PAL_MODE_UNCONNECTED, /* P0.3 */ - PAL_MODE_UNCONNECTED, /* P0.4 */ - PAL_MODE_UNCONNECTED, /* P0.5 */ - PAL_MODE_UNCONNECTED, /* P0.6 */ - PAL_MODE_UNCONNECTED, /* P0.7 */ - PAL_MODE_UNCONNECTED, /* P0.8 UART_RTS */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.9: UART_TX */ - PAL_MODE_UNCONNECTED, /* P0.10 UART_CTS */ - PAL_MODE_INPUT_PULLUP, /* P0.11: UART_RX */ - PAL_MODE_UNCONNECTED, /* P0.12 */ - PAL_MODE_UNCONNECTED, /* P0.13 */ - PAL_MODE_UNCONNECTED, /* P0.14 */ - PAL_MODE_UNCONNECTED, /* P0.15 */ - PAL_MODE_INPUT_PULLUP, /* P0.16: KEY1 */ - PAL_MODE_INPUT_PULLUP, /* P0.17: KEY2 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.18: LED0 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.19: LED1 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.20: LED2 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.21: LED3 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.22: LED4 */ - PAL_MODE_INPUT, /* P0.23: SPI_MISO */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.24: SPI_MOSI */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.25: SPI_SCK */ - PAL_MODE_UNCONNECTED, /* P0.26 */ - PAL_MODE_UNCONNECTED, /* P0.27 */ - PAL_MODE_UNCONNECTED, /* P0.28 */ - PAL_MODE_UNCONNECTED, /* P0.29 */ - PAL_MODE_OUTPUT_PUSHPULL, /* P0.30: SPI_NSS */ - PAL_MODE_UNCONNECTED, /* P0.31 */ - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization is performed just after reset before BSS and - * DATA segments initialization. - */ -void __early_init(void) -{ -} - -/** - * @brief Late initialization code. - * @note This initialization is performed after BSS and DATA segments - * initialization and before invoking the main() function. - */ -void boardInit(void) -{ - //FIXME: not really needed yet - //NRF_CLOCK->XTALFREQ = 0xff; - //NRF_CLOCK->EVENTS_HFCLKSTARTED = 0; - //NRF_CLOCK->TASKS_HFCLKSTART = 1; - //while (!NRF_CLOCK->EVENTS_HFCLKSTARTED) {} -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h deleted file mode 100644 index 5a4e8f0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* Board identifier. */ -#define BOARD_WVSHARE_BLE400 -#define BOARD_NAME "WvShare BLE400" - -/* Board oscillators-related settings. */ -#define NRF51_XTAL_VALUE 16000000 - -/* GPIO pins. */ -#define KEY1 16 -#define KEY2 17 -#define LED0 18 -#define LED1 19 -#define LED2 20 -#define LED3 21 -#define LED4 22 -#define UART_TX 9 -#define UART_RX 11 -#define UART_RTS 8 -#define UART_CTS 10 -#define SPI_SCK 25 -#define SPI_MOSI 24 -#define SPI_MISO 23 -#define SPI_SS 30 -#define I2C_SCL 1 -#define I2C_SDA 0 -#define AIN0 26 -#define AIN1 27 -#define AIN2 1 -#define AIN3 2 -#define AIN4 3 -#define AIN5 4 -#define AIN6 5 -#define AIN7 6 -#define AREF0 0 -#define AREF1 6 - -/* - * IO pins assignments. - */ -#define IOPORT1_KEY1 16U -#define IOPORT1_KEY2 17U -#define IOPORT1_LED0 18U -#define IOPORT1_LED1 19U -#define IOPORT1_LED2 20U -#define IOPORT1_LED3 21U -#define IOPORT1_LED4 22U -#define IOPORT1_UART_TX 9U -#define IOPORT1_UART_RX 11U -#define IOPORT1_UART_RTS 8U -#define IOPORT1_UART_CTS 10U -#define IOPORT1_SPI_SCK 25U -#define IOPORT1_SPI_MOSI 24U -#define IOPORT1_SPI_MISO 23U -#define IOPORT1_SPI_SS 30U -#define IOPORT1_I2C_SCL 1U -#define IOPORT1_I2C_SDA 0U -#define IOPORT1_AIN0 26U -#define IOPORT1_AIN1 27U -#define IOPORT1_AIN2 1U -#define IOPORT1_AIN3 2U -#define IOPORT1_AIN4 3U -#define IOPORT1_AIN5 4U -#define IOPORT1_AIN6 5U -#define IOPORT1_AIN7 6U -#define IOPORT1_AREF0 0U -#define IOPORT1_AREF1 6U - -/* - * IO lines assignments. - */ -#define LINE_KEY1 PAL_LINE(IOPORT1, IOPORT1_KEY1) -#define LINE_KEY2 PAL_LINE(IOPORT1, IOPORT1_KEY2) -#define LINE_LED0 PAL_LINE(IOPORT1, IOPORT1_LED0) -#define LINE_LED1 PAL_LINE(IOPORT1, IOPORT1_LED1) -#define LINE_LED2 PAL_LINE(IOPORT1, IOPORT1_LED2) -#define LINE_LED3 PAL_LINE(IOPORT1, IOPORT1_LED3) -#define LINE_LED4 PAL_LINE(IOPORT1, IOPORT1_LED4) -#define LINE_UART_TX PAL_LINE(IOPORT1, IOPORT1_UART_TX) -#define LINE_UART_RX PAL_LINE(IOPORT1, IOPORT1_UART_RX) -#define LINE_UART_RTS PAL_LINE(IOPORT1, IOPORT1_UART_RTS) -#define LINE_UART_CTS PAL_LINE(IOPORT1, IOPORT1_UART_CTS) -#define LINE_SPI_SCK PAL_LINE(IOPORT1, IOPORT1_SPI_SCK) -#define LINE_SPI_MOSI PAL_LINE(IOPORT1, IOPORT1_SPI_MOSI) -#define LINE_SPI_MISO PAL_LINE(IOPORT1, IOPORT1_SPI_MISO) -#define LINE_SPI_SS PAL_LINE(IOPORT1, IOPORT1_SPI_SS) -#define LINE_I2C_SCL PAL_LINE(IOPORT1, IOPORT1_I2C_SCL) -#define LINE_I2C_SDA PAL_LINE(IOPORT1, IOPORT1_I2C_SDA) -#define LINE_AIN0 PAL_LINE(IOPORT1, IOPORT1_AIN0) -#define LINE_AIN1 PAL_LINE(IOPORT1, IOPORT1_AIN1) -#define LINE_AIN2 PAL_LINE(IOPORT1, IOPORT1_AIN2) -#define LINE_AIN3 PAL_LINE(IOPORT1, IOPORT1_AIN3) -#define LINE_AIN4 PAL_LINE(IOPORT1, IOPORT1_AIN4) -#define LINE_AIN5 PAL_LINE(IOPORT1, IOPORT1_AIN5) -#define LINE_AIN6 PAL_LINE(IOPORT1, IOPORT1_AIN6) -#define LINE_AIN7 PAL_LINE(IOPORT1, IOPORT1_AIN7) -#define LINE_AREF0 PAL_LINE(IOPORT1, IOPORT1_AREF0) -#define LINE_AREF1 PAL_LINE(IOPORT1, IOPORT1_AREF1) - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk deleted file mode 100644 index ade4201..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/WVSHARE_BLE400/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/WVSHARE_BLE400 diff --git a/ChibiOS_16.1.5/community/os/hal/hal.mk b/ChibiOS_16.1.5/community/os/hal/hal.mk deleted file mode 100644 index ce74620..0000000 --- a/ChibiOS_16.1.5/community/os/hal/hal.mk +++ /dev/null @@ -1,23 +0,0 @@ -include ${CHIBIOS}/os/hal/hal.mk - -HALSRC += ${CHIBIOS_CONTRIB}/os/hal/src/hal_community.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_nand.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_onewire.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_eicu.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_crc.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_rng.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_usbh.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/usbh/hal_usbh_debug.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/usbh/hal_usbh_desciter.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/usbh/hal_usbh_hub.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/usbh/hal_usbh_msd.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/usbh/hal_usbh_ftdi.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/usbh/hal_usbh_uvc.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_ee24xx.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_ee25xx.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_eeprom.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_timcap.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_qei.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_usb_hid.c - -HALINC += ${CHIBIOS_CONTRIB}/os/hal/include diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_community.h b/ChibiOS_16.1.5/community/os/hal/include/hal_community.h deleted file mode 100644 index 1518c7e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_community.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_community.h - * @brief HAL subsystem header (community part). - * - * @addtogroup HAL_COMMUNITY - * @{ - */ - -#ifndef HAL_COMMUNITY_H -#define HAL_COMMUNITY_H - - -/* Error checks on the configuration header file.*/ -#if !defined(HAL_USE_CRC) -#define HAL_USE_CRC FALSE -#endif - -#if !defined(HAL_USE_EEPROM) -#define HAL_USE_EEPROM FALSE -#endif - -#if !defined(HAL_USE_EICU) -#define HAL_USE_EICU FALSE -#endif - -#if !defined(HAL_USE_NAND) -#define HAL_USE_NAND FALSE -#endif - -#if !defined(HAL_USE_ONEWIRE) -#define HAL_USE_ONEWIRE FALSE -#endif - -#if !defined(HAL_USE_QEI) -#define HAL_USE_QEI FALSE -#endif - -#if !defined(HAL_USE_RNG) -#define HAL_USE_RNG FALSE -#endif - -#if !defined(HAL_USE_TIMCAP) -#define HAL_USE_TIMCAP FALSE -#endif - -#if !defined(HAL_USE_USBH) -#define HAL_USE_USBH FALSE -#endif - -#if !defined(HAL_USE_USB_HID) -#define HAL_USE_USB_HID FALSE -#endif - -/* Abstract interfaces.*/ - -/* Shared headers.*/ - -/* Normal drivers.*/ -#include "hal_nand.h" -#include "hal_eicu.h" -#include "hal_rng.h" -#include "hal_usbh.h" -#include "hal_timcap.h" -#include "hal_qei.h" - -/* Complex drivers.*/ -#include "hal_onewire.h" -#include "hal_crc.h" -#include "hal_eeprom.h" -#include "hal_usb_hid.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void halCommunityInit(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_COMMUNITY_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_crc.h b/ChibiOS_16.1.5/community/os/hal/include/hal_crc.h deleted file mode 100644 index 8c4c895..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_crc.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CRC_H_ -#define _CRC_H_ - -#if (HAL_USE_CRC == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief Enable DMA CRC - * @note Enables DMA when doing CRC calculations. This may be less - * efficient with smaller CRC calculations. - */ -#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__) -#define CRC_USE_DMA FALSE -#endif - -/** - * @brief Enables the @p crcAcquireBus() and @p crcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define CRC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if STM32_CRC_USE_CRC1 != TRUE && CRCSW_USE_CRC1 != TRUE -#error "CRC requires at least one LLD driver." -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - CRC_UNINIT, /* Not initialized. */ - CRC_STOP, /* Stopped. */ - CRC_READY, /* Ready. */ - CRC_ACTIVE, /* Calculating CRC. */ - CRC_COMPLETE /* Asynchronous operation complete. */ -} crcstate_t; - -#include "hal_crc_lld.h" -#include "crcsw.h" /* Include software LL driver */ - - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @name Low level driver helper macros - * @{ - */ - -/** - * @brief Wakes up the waiting thread. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -#define _crc_wakeup_isr(crcp) { \ - osalSysLockFromISR(); \ - osalThreadResumeI(&(crcp)->thread, MSG_OK); \ - osalSysUnlockFromISR(); \ -} - -/** - * @brief Common ISR code. - * @details This code handles the portable part of the ISR code: - * - Callback invocation. - * - Waiting thread wakeup, if any. - * - Driver state transitions. - * . - * @note This macro is meant to be used in the low level drivers - * implementation only. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -#define _crc_isr_code(crcp, crc) { \ - if ((crcp)->config->end_cb) { \ - (crcp)->state = CRC_COMPLETE; \ - (crcp)->config->end_cb(crcp, crc); \ - if ((crcp)->state == CRC_COMPLETE) \ - (crcp)->state = CRC_READY; \ - } \ - else \ - (crcp)->state = CRC_READY; \ - _crc_wakeup_isr(crcp); \ -} - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void crcInit(void); - void crcObjectInit(CRCDriver *crcp); - void crcStart(CRCDriver *crcp, const CRCConfig *config); - void crcStop(CRCDriver *crcp); - void crcReset(CRCDriver *crcp); - void crcResetI(CRCDriver *crcp); - uint32_t crcCalc(CRCDriver *crcp, size_t n, const void *buf); - uint32_t crcCalcI(CRCDriver *crcp, size_t n, const void *buf); -#if CRC_USE_DMA == TRUE - void crcStartCalc(CRCDriver *crcp, size_t n, const void *buf); - void crcStartCalcI(CRCDriver *crcp, size_t n, const void *buf); -#endif -#if CRC_USE_MUTUAL_EXCLUSION == TRUE - void crcAcquireUnit(CRCDriver *crcp); - void crcReleaseUnit(CRCDriver *crcp); -#endif -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_CRC */ - -#endif /* _CRC_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_ee24xx.h b/ChibiOS_16.1.5/community/os/hal/include/hal_ee24xx.h deleted file mode 100644 index ab12fd1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_ee24xx.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - Copyright 2012 Uladzimir Pylinski aka barthess. - You may use this work without restrictions, as long as this notice is included. - The work is provided "as is" without warranty of any kind, neither express nor implied. -*/ - -#ifndef EE24XX_H -#define EE24XX_H - -#include "hal.h" - -#if defined(HAL_USE_EEPROM) && HAL_USE_EEPROM && EEPROM_USE_EE24XX - -#define EEPROM_DEV_24XX 24 - -/** - * @extends EepromFileConfig - */ -typedef struct { - _eeprom_file_config_data - /** - * Driver connected to IC. - */ - I2CDriver *i2cp; - /** - * Address of IC on I2C bus. - */ - i2caddr_t addr; - /** - * Pointer to write buffer. The safest size is (pagesize + 2) - */ - uint8_t *write_buf; -} I2CEepromFileConfig; - -/** - * @brief @p I2CEepromFileStream specific data. - */ -#define _eeprom_file_stream_data_i2c \ - _eeprom_file_stream_data - -/** - * @extends EepromFileStream - * - * @brief EEPROM file stream driver class for I2C device. - */ -typedef struct { - const struct EepromFileStreamVMT *vmt; - _eeprom_file_stream_data_i2c - /* Overwritten parent data member. */ - const I2CEepromFileConfig *cfg; -} I2CEepromFileStream; - - -/** - * Open I2C EEPROM IC as file and return pointer to the file stream object - * @note Fucntion allways successfully open file. All checking makes - * in read/write functions. - */ -#define I2CEepromFileOpen(efs, eepcfg, eepdev) \ - EepromFileOpen((EepromFileStream *)efs, (EepromFileConfig *)eepcfg, eepdev); - -#endif /* #if defined(EEPROM_USE_EE24XX) && EEPROM_USE_EE24XX */ - -#endif // EE24XX_H diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_ee25xx.h b/ChibiOS_16.1.5/community/os/hal/include/hal_ee25xx.h deleted file mode 100644 index fc2ad6f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_ee25xx.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - Copyright 2012 Uladzimir Pylinski aka barthess. - You may use this work without restrictions, as long as this notice is included. - The work is provided "as is" without warranty of any kind, neither express nor implied. -*/ - -#ifndef EE25XX_H -#define EE25XX_H - -#include "hal.h" - -#if defined(HAL_USE_EEPROM) && HAL_USE_EEPROM && EEPROM_USE_EE25XX - -#define EEPROM_DEV_25XX 25 - -/** - * @extends EepromFileConfig - */ -typedef struct { - _eeprom_file_config_data - /** - * Driver connected to IC. - */ - SPIDriver *spip; - /** - * Config associated with SPI driver. - */ - const SPIConfig *spicfg; -} SPIEepromFileConfig; - -/** - * @brief @p SPIEepromFileStream specific data. - */ -#define _eeprom_file_stream_data_spi \ - _eeprom_file_stream_data - -/** - * @extends EepromFileStream - * - * @brief EEPROM file stream driver class for SPI device. - */ -typedef struct { - const struct EepromFileStreamVMT *vmt; - _eeprom_file_stream_data_spi - /* Overwritten parent data member. */ - const SPIEepromFileConfig *cfg; -} SPIEepromFileStream; - -/** - * Open SPI EEPROM IC as file and return pointer to the file stream object - * @note Fucntion allways successfully open file. All checking makes - * in read/write functions. - */ -EepromFileStream *SPIEepromFileOpen(SPIEepromFileStream *efs, - const SPIEepromFileConfig *eepcfg, - const EepromDevice *eepdev); - -#define SPIEepromFileOpen(efs, eepcfg, eepdev) \ - EepromFileOpen((EepromFileStream *)efs, (EepromFileConfig *)eepcfg, eepdev); - -#endif /* #if defined(EEPROM_USE_EE25XX) && EEPROM_USE_EE25XX */ - -#endif // EE25XX_H diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_eeprom.h b/ChibiOS_16.1.5/community/os/hal/include/hal_eeprom.h deleted file mode 100644 index cd05e14..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_eeprom.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - Copyright (c) 2013 Timon Wong - - Permission is hereby granted, free of charge, to any person obtaining a copy - of this software and associated documentation files (the "Software"), to deal - in the Software without restriction, including without limitation the rights - to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - copies of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be included in all - copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - THE SOFTWARE. -*/ - -/* - Copyright 2012 Uladzimir Pylinski aka barthess. - You may use this work without restrictions, as long as this notice is included. - The work is provided "as is" without warranty of any kind, neither express nor implied. -*/ - -#ifndef __EEPROM_H__ -#define __EEPROM_H__ - -#include "ch.h" -#include "hal.h" - -#ifndef EEPROM_USE_EE25XX -#define EEPROM_USE_EE25XX FALSE -#endif - -#ifndef EEPROM_USE_EE24XX -#define EEPROM_USE_EE24XX FALSE -#endif - -#if (HAL_USE_EEPROM == TRUE) || defined(__DOXYGEN__) - -#if EEPROM_USE_EE25XX && EEPROM_USE_EE24XX -#define EEPROM_TABLE_SIZE 2 -#elif EEPROM_USE_EE25XX || EEPROM_USE_EE24XX -#define EEPROM_TABLE_SIZE 1 -#else -#error "No EEPROM device selected!" -#endif - -#if EEPROM_USE_EE25XX && !HAL_USE_SPI -#error "25xx enabled but SPI driver is disabled!" -#endif - -#if EEPROM_USE_EE24XX && !HAL_USE_I2C -#error "24xx enabled but I2C driver is disabled!" -#endif - -#define _eeprom_file_config_data \ - /* Lower barrier of file in EEPROM memory array. */ \ - uint32_t barrier_low; \ - /* Higher barrier of file in EEPROM memory array. */ \ - uint32_t barrier_hi; \ - /* Size of memory array in bytes. */ \ - uint32_t size; \ - /* Size of single page in bytes. */ \ - uint16_t pagesize; \ - /* Time needed by IC for single byte/page writing. */ \ - systime_t write_time; - -typedef uint32_t fileoffset_t; - -typedef struct { - _eeprom_file_config_data -} EepromFileConfig; - -/** - * @brief @p EepromFileStream specific data. - */ -#define _eeprom_file_stream_data \ - _base_sequential_stream_data \ - uint32_t errors; \ - uint32_t position; \ - -/** - * @extends BaseFileStreamVMT - * - * @brief @p EepromFileStream virtual methods table. - */ -struct EepromFileStreamVMT { - _file_stream_methods -}; - -/** - * @extends BaseFileStream - * - * @brief EEPROM file stream driver class. - * @details This class extends @p BaseFileStream by adding some fields. - */ -typedef struct { - /** @brief Virtual Methods Table.*/ - const struct EepromFileStreamVMT *vmt; - _eeprom_file_stream_data - /** pointer to config object, must be overwritten by all derived classes.*/ - const EepromFileConfig *cfg; -} EepromFileStream; - -/** - * @brief Low level device descriptor. - */ -typedef struct { - const uint8_t id; - const struct EepromFileStreamVMT *efsvmt; -} EepromDevice; - -const EepromDevice *EepromFindDevice(uint8_t id); - -EepromFileStream *EepromFileOpen(EepromFileStream *efs, - const EepromFileConfig *eepcfg, - const EepromDevice *eepdev); - -uint8_t EepromReadByte(EepromFileStream *efs); -uint16_t EepromReadHalfword(EepromFileStream *efs); -uint32_t EepromReadWord(EepromFileStream *efs); -size_t EepromWriteByte(EepromFileStream *efs, uint8_t data); -size_t EepromWriteHalfword(EepromFileStream *efs, uint16_t data); -size_t EepromWriteWord(EepromFileStream *efs, uint32_t data); - -msg_t eepfs_getsize(void *ip); -msg_t eepfs_getposition(void *ip); -msg_t eepfs_lseek(void *ip, fileoffset_t offset); -msg_t eepfs_close(void *ip); -msg_t eepfs_geterror(void *ip); -msg_t eepfs_put(void *ip, uint8_t b); -msg_t eepfs_get(void *ip); - -#include "hal_ee24xx.h" -#include "hal_ee25xx.h" - -#endif /* #if defined(HAL_USE_EEPROM) && HAL_USE_EEPROM */ -#endif /* __EEPROM_H__ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_eicu.h b/ChibiOS_16.1.5/community/os/hal/include/hal_eicu.h deleted file mode 100644 index d4b0ed2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_eicu.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Rewritten by Emil Fresk (1/5 - 2014) for extended input capture - functionality. And fix for spurious callbacks in the interrupt handler. -*/ -/* - Improved by Uladzimir Pylinsky aka barthess (1/3 - 2015) for support of - 32-bit timers and timers with single capture/compare channels. -*/ - -#ifndef _EICU_H_ -#define _EICU_H_ - -#if (HAL_USE_EICU == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - EICU_UNINIT, /* Not initialized. */ - EICU_STOP, /* Stopped. */ - EICU_READY, /* Ready. */ - EICU_WAITING, /* Waiting for first edge. */ - EICU_ACTIVE, /* Active cycle phase. */ - EICU_IDLE /* Idle cycle phase. */ -} eicustate_t; - -/** - * @brief Channel state machine possible states. - */ -typedef enum { - EICU_CH_IDLE, /* Idle cycle phase. */ - EICU_CH_ACTIVE /* Active cycle phase. */ -} eicuchannelstate_t; - -/** - * @brief EICU channel selection definition - */ -typedef enum { - EICU_CHANNEL_1, - EICU_CHANNEL_2, - EICU_CHANNEL_3, - EICU_CHANNEL_4, - EICU_CHANNEL_ENUM_END -} eicuchannel_t; - -/** - * @brief Type of a structure representing an EICU driver. - */ -typedef struct EICUDriver EICUDriver; - -/** - * @brief EICU notification callback type. - * - * @param[in] eicup Pointer to a EICUDriver object - * @param[in] channel EICU channel that fired the interrupt - * @param[in] width Pulse width - * @param[in] period Pulse period - */ -typedef void (*eicucallback_t)(EICUDriver *eicup, eicuchannel_t channel, - uint32_t width, uint32_t period); - -#include "hal_eicu_lld.h" - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @name Macro Functions - * @{ - */ -/** - * @brief Enables the extended input capture. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @iclass - */ -#define eicuEnableI(eicup) eicu_lld_enable(eicup) - -/** - * @brief Disables the extended input capture. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @iclass - */ -#define eicuDisableI(eicup) eicu_lld_disable(eicup) -/** @} */ - -/** - * @name Low Level driver helper macros - * @{ - */ -/** - * @brief Common ISR code, EICU PWM width event. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * @param[in] channel The timer channel that fired the interrupt. - * - * @notapi - */ -static inline void _eicu_isr_invoke_pwm_width_cb(EICUDriver *eicup, - eicuchannel_t channel) { - if (eicup->state != EICU_WAITING) { - eicup->state = EICU_IDLE; - eicup->config->iccfgp[channel]->capture_cb(eicup, channel, 0, 0); - } -} - -/** - * @brief Common ISR code, EICU PWM period event. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * @param[in] channel The timer channel that fired the interrupt. - * - * @notapi - */ -static inline void _eicu_isr_invoke_pwm_period_cb(EICUDriver *eicup, - eicuchannel_t channel) { - eicustate_t previous_state = eicup->state; - eicup->state = EICU_ACTIVE; - if (previous_state != EICU_WAITING) - eicup->channel[channel].config->capture_cb(eicup, channel, 0, 0); -} - -/** - * @brief Common ISR code, EICU timer overflow event. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @notapi - */ -#define _eicu_isr_invoke_overflow_cb(icup) do { \ - (eicup)->config->overflow_cb(eicup, 0, 0, 0); \ -} while (0) -/** @} */ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void eicuInit(void); - void eicuObjectInit(EICUDriver *eicup); - void eicuStart(EICUDriver *eicup, const EICUConfig *config); - void eicuStop(EICUDriver *eicup); - void eicuEnable(EICUDriver *eicup); - void eicuDisable(EICUDriver *eicup); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EICU */ - -#endif /* _EICU_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_nand.h b/ChibiOS_16.1.5/community/os/hal/include/hal_nand.h deleted file mode 100644 index d5a1c04..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_nand.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nand.h - * @brief NAND Driver macros and structures. - * - * @addtogroup NAND - * @{ - */ - -#ifndef _NAND_H_ -#define _NAND_H_ - -#if (HAL_USE_NAND == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Standard NAND flash commands - */ -#define NAND_CMD_READ0 0x00 -#define NAND_CMD_RNDOUT 0x05 -#define NAND_CMD_PAGEPROG 0x10 -#define NAND_CMD_READ0_CONFIRM 0x30 -#define NAND_CMD_READOOB 0x50 -#define NAND_CMD_ERASE 0x60 -#define NAND_CMD_STATUS 0x70 -#define NAND_CMD_STATUS_MULTI 0x71 -#define NAND_CMD_WRITE 0x80 -#define NAND_CMD_RNDIN 0x85 -#define NAND_CMD_READID 0x90 -#define NAND_CMD_ERASE_CONFIRM 0xD0 -#define NAND_CMD_RESET 0xFF - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ -/** - * @brief Enables the mutual exclusion APIs on the NAND. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ -#if NAND_USE_MUTUAL_EXCLUSION && !CH_CFG_USE_MUTEXES && !CH_CFG_USE_SEMAPHORES -#error "NAND_USE_MUTUAL_EXCLUSION requires CH_CFG_USE_MUTEXES and/or CH_CFG_USE_SEMAPHORES" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - NAND_UNINIT = 0, /**< Not initialized. */ - NAND_STOP = 1, /**< Stopped. */ - NAND_READY = 2, /**< Ready. */ - NAND_PROGRAM = 3, /**< Programming in progress. */ - NAND_ERASE = 4, /**< Erasing in progress. */ - NAND_WRITE = 5, /**< Writing to NAND buffer. */ - NAND_READ = 6, /**< Reading from NAND. */ - NAND_DMA_TX = 7, /**< DMA transmitting. */ - NAND_DMA_RX = 8, /**< DMA receiving. */ -} nandstate_t; - -/** - * @brief Type of a structure representing a NAND driver. - */ -typedef struct NANDDriver NANDDriver; - -#include "hal_nand_lld.h" - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void nandInit(void); - void nandObjectInit(NANDDriver *nandp); - void nandStart(NANDDriver *nandp, const NANDConfig *config, bitmap_t *bb_map); - void nandStop(NANDDriver *nandp); - void nandReadPageWhole(NANDDriver *nandp, uint32_t block, uint32_t page, - uint8_t *data, size_t datalen); - void nandMarkBad(NANDDriver *nandp, uint32_t block); - void nandReadPageData(NANDDriver *nandp, uint32_t block, uint32_t page, - uint8_t *data, size_t datalen, uint32_t *ecc); - void nandReadPageSpare(NANDDriver *nandp, uint32_t block, uint32_t page, - uint8_t *spare, size_t sparelen); - uint8_t nandWritePageWhole(NANDDriver *nandp, uint32_t block, uint32_t page, - const uint8_t *data, size_t datalen); - uint8_t nandWritePageData(NANDDriver *nandp, uint32_t block, uint32_t page, - const uint8_t *data, size_t datalen, uint32_t *ecc); - uint8_t nandWritePageSpare(NANDDriver *nandp, uint32_t block, uint32_t page, - const uint8_t *spare, size_t sparelen); - uint8_t nandReadBadMark(NANDDriver *nandp, uint32_t block, uint32_t page); - uint8_t nandErase(NANDDriver *nandp, uint32_t block); - bool nandIsBad(NANDDriver *nandp, uint32_t block); -#if NAND_USE_MUTUAL_EXCLUSION - void nandAcquireBus(NANDDriver *nandp); - void nandReleaseBus(NANDDriver *nandp); -#endif /* NAND_USE_MUTUAL_EXCLUSION */ -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_NAND */ - -#endif /* _NAND_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_onewire.h b/ChibiOS_16.1.5/community/os/hal/include/hal_onewire.h deleted file mode 100644 index 9fb5be2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_onewire.h +++ /dev/null @@ -1,366 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file onewire.h - * @brief 1-wire Driver macros and structures. - * - * @addtogroup onewire - * @{ - */ - -#ifndef _ONEWIRE_H_ -#define _ONEWIRE_H_ - -#if (HAL_USE_ONEWIRE == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ -/** - * @brief Enable synthetic test for 'search ROM' procedure. - * @note Only for debugging/testing! - */ -#define ONEWIRE_SYNTH_SEARCH_TEST FALSE - -/** - * @brief Aliases for 1-wire protocol. - */ -#define ONEWIRE_CMD_READ_ROM 0x33 -#define ONEWIRE_CMD_SEARCH_ROM 0xF0 -#define ONEWIRE_CMD_MATCH_ROM 0x55 -#define ONEWIRE_CMD_SKIP_ROM 0xCC -#define ONEWIRE_CMD_CONVERT_TEMP 0x44 -#define ONEWIRE_CMD_READ_SCRATCHPAD 0xBE - -/** - * @brief How many bits will be used for transaction length storage. - */ -#define ONEWIRE_REG_BYTES_WIDTH 16U - -/** - * @brief Precalculated maximum transaction length. - */ -#define ONEWIRE_MAX_TRANSACTION_LEN ((1U << ONEWIRE_REG_BYTES_WIDTH) - 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !HAL_USE_PWM -#error "1-wire Driver requires HAL_USE_PWM" -#endif - -#if !HAL_USE_PAL -#error "1-wire Driver requires HAL_USE_PAL" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ -#if ONEWIRE_USE_STRONG_PULLUP -/** - * @brief 1-wire strong pull up assert callback type. - */ -typedef void (*onewire_pullup_assert_t)(void); - -/** - * @brief 1-wire strong pull up release callback type. - */ -typedef void (*onewire_pullup_release_t)(void); -#endif /* ONEWIRE_USE_STRONG_PULLUP */ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - ONEWIRE_UNINIT = 0, /**< Not initialized. */ - ONEWIRE_STOP = 1, /**< Stopped. */ - ONEWIRE_READY = 2, /**< Ready. */ -#if ONEWIRE_USE_STRONG_PULLUP - ONEWIRE_PULL_UP /**< Pull up asserted. */ -#endif -} onewire_state_t; - -#if ONEWIRE_USE_SEARCH_ROM -/** - * @brief Search ROM procedure possible state. - */ -typedef enum { - ONEWIRE_SEARCH_ROM_SUCCESS = 0, /**< ROM successfully discovered. */ - ONEWIRE_SEARCH_ROM_LAST = 1, /**< Last ROM successfully discovered. */ - ONEWIRE_SEARCH_ROM_ERROR = 2 /**< Error happened during search. */ -} search_rom_result_t; - -/** - * @brief Search ROM procedure iteration enum. - */ -typedef enum { - ONEWIRE_SEARCH_ROM_FIRST = 0, /**< First search run. */ - ONEWIRE_SEARCH_ROM_NEXT = 1 /**< Next search run. */ -} search_iteration_t; -#endif /* ONEWIRE_USE_SEARCH_ROM */ - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /** - * @brief Pointer to @p PWM driver used for communication. - */ - PWMDriver *pwmd; - /** - * @brief Pointer to configuration structure for underlying PWM driver. - * @note It is NOT constant because 1-wire driver needs to change them - * during normal functioning. - */ - PWMConfig *pwmcfg; - /** - * @brief Active logic level for master channel. - * @details Just set it to @p PWM_OUTPUT_ACTIVE_LOW when 1-wire bus - * connected to direct (not complementary) output of the timer. - * In opposite case you need to check documentation to choose - * correct value. - */ - pwmmode_t pwmmode; - /** - * @brief Number of PWM channel used as master pulse generator. - */ - size_t master_channel; - /** - * @brief Number of PWM channel used as sample interrupt generator. - */ - size_t sample_channel; - /** - * @brief Port Identifier. - * @details This type can be a scalar or some kind of pointer, do not make - * any assumption about it, use the provided macros when populating - * variables of this type. - */ - ioportid_t port; - /** - * @brief Digital I/O port pad. - */ - ioportmask_t pad; -#if defined(STM32F1XX) - /** - * @brief Digital I/O mode for idle bus. - * @details This is a kind of workaround against F1x realization of alternate - * function. Alternate function mode will be activated only - * when you starts appropriate peripheral. - */ - iomode_t pad_mode_idle; -#endif - /** - * @brief Digital I/O mode for active bus. - */ - iomode_t pad_mode_active; -#if ONEWIRE_USE_STRONG_PULLUP - /** - * @brief Pointer to function asserting of strong pull up. - */ - onewire_pullup_assert_t pullup_assert; - /** - * @brief Pointer to function releasing of strong pull up. - */ - onewire_pullup_release_t pullup_release; -#endif -} onewireConfig; - -#if ONEWIRE_USE_SEARCH_ROM -/** - * @brief Search ROM registry. Contains small variables used - * in 'search ROM' procedure. - */ -typedef struct { - /** - * @brief Bool flag. True when bus has single slave device. - */ - uint32_t single_device: 1; - /** - * @brief Search iteration (@p search_iteration_t enum). - */ - uint32_t search_iter: 1; - /** - * @brief Result of discovery procedure (@p search_rom_result_t enum). - */ - uint32_t result: 2; - /** - * @brief One of 3 steps of bit discovery. - * @details 0 - direct, 1 - complemented, 2 - generated by master. - */ - uint32_t bit_step: 2; - /** - * @brief Values acquired during bit discovery. - */ - uint32_t bit_buf: 2; - /** - * @brief Currently processing ROM bit. - * @note Must be big enough to store number 64. - */ - uint32_t rombit: 7; - /** - * @brief Total device count discovered on bus. - * @note Maximum 256. - */ - uint32_t devices_found: 8; -} search_rom_reg_t; - -/** - * @brief Helper structure for 'search ROM' procedure - */ -typedef struct { - /** - * @brief Search ROM registry. - */ - search_rom_reg_t reg; - /** - * @brief Pointer to buffer with currently discovering ROM - */ - uint8_t *retbuf; - /** - * @brief Previously discovered ROM. - */ - uint8_t prev_path[8]; - /** - * @brief Last zero turn branch. - * @note Negative values use to point out of device tree's root. - */ - int8_t last_zero_branch; - /** - * @brief Previous zero turn branch. - * @note Negative values use to point out of device tree's root. - */ - int8_t prev_zero_branch; -} onewire_search_rom_t; -#endif /* ONEWIRE_USE_SEARCH_ROM */ - -/** - * @brief Onewire registry. Some small variables combined - * in single machine word to save RAM. - */ -typedef struct { -#if ONEWIRE_USE_STRONG_PULLUP - /** - * @brief This flag will be asserted by driver to signalizes - * ISR part when strong pull up needed. - */ - uint32_t need_pullup: 1; -#endif - /** - * @brief Bool flag. If @p true than at least one device presence on bus. - */ - uint32_t slave_present: 1; - /** - * @brief Driver internal state (@p onewire_state_t enum). - */ - uint32_t state: 2; - /** - * @brief Bit number in currently receiving/sending byte. - * @note Must be big enough to store 8. - */ - uint32_t bit: 4; - /** - * @brief Bool flag for premature timer stop prevention. - */ - uint32_t final_timeslot: 1; - /** - * @brief Bytes number to be processing in current transaction. - */ - uint32_t bytes: ONEWIRE_REG_BYTES_WIDTH; -} onewire_reg_t; - -/** - * @brief Structure representing an 1-wire driver. - */ -typedef struct { - /** - * @brief Onewire registry. - */ - onewire_reg_t reg; - /** - * @brief Onewire config. - */ - const onewireConfig *config; - /** - * @brief Pointer to I/O data buffer. - */ - uint8_t *buf; -#if ONEWIRE_USE_SEARCH_ROM - /** - * @brief Search ROM helper structure. - */ - onewire_search_rom_t search_rom; -#endif /* ONEWIRE_USE_SEARCH_ROM */ - /** - * @brief Thread waiting for I/O completion. - */ - thread_reference_t thread; -} onewireDriver; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern onewireDriver OWD1; - -#ifdef __cplusplus -extern "C" { -#endif - void onewireInit(void); - void onewireObjectInit(onewireDriver *owp); - void onewireStart(onewireDriver *owp, const onewireConfig *config); - void onewireStop(onewireDriver *owp); - bool onewireReset(onewireDriver *owp); - void onewireRead(onewireDriver *owp, uint8_t *rxbuf, size_t rxbytes); - uint8_t onewireCRC(const uint8_t *buf, size_t len); - void onewireWrite(onewireDriver *owp, uint8_t *txbuf, - size_t txbytes, systime_t pullup_time); -#if ONEWIRE_USE_SEARCH_ROM - size_t onewireSearchRom(onewireDriver *owp, - uint8_t *result, size_t max_rom_cnt); -#endif /* ONEWIRE_USE_SEARCH_ROM */ -#if ONEWIRE_SYNTH_SEARCH_TEST - void _synth_ow_write_bit(onewireDriver *owp, ioline_t bit); - ioline_t _synth_ow_read_bit(void); - void synthSearchRomTest(onewireDriver *owp); -#endif /* ONEWIRE_SYNTH_SEARCH_TEST */ -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_ONEWIRE */ - -#endif /* _ONEWIRE_H_ */ - -/** @} */ - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_qei.h b/ChibiOS_16.1.5/community/os/hal/include/hal_qei.h deleted file mode 100644 index 92f03fc..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_qei.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Martino Migliavacca - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_qei.h - * @brief QEI Driver macros and structures. - * - * @addtogroup QEI - * @{ - */ - -#ifndef HAL_QEI_H -#define HAL_QEI_H - -#if (HAL_USE_QEI == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - QEI_UNINIT = 0, /**< Not initialized. */ - QEI_STOP = 1, /**< Stopped. */ - QEI_READY = 2, /**< Ready. */ - QEI_ACTIVE = 3, /**< Active. */ -} qeistate_t; - -/** - * @brief Type of a structure representing an QEI driver. - */ -typedef struct QEIDriver QEIDriver; - -/** - * @brief QEI notification callback type. - * - * @param[in] qeip pointer to a @p QEIDriver object - */ -typedef void (*qeicallback_t)(QEIDriver *qeip); - -#include "hal_qei_lld.h" - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @name Macro Functions - * @{ - */ -/** - * @brief Enables the input capture. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @iclass - */ -#define qeiEnableI(qeip) qei_lld_enable(qeip) - -/** - * @brief Disables the input capture. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @iclass - */ -#define qeiDisableI(qeip) qei_lld_disable(qeip) - -/** - * @brief Returns the counter value. - * - * @param[in] qeip pointer to the @p QEIDriver object - * @return The current counter value. - * - * @iclass - */ -#define qeiGetCountI(qeip) qei_lld_get_count(qeip) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void qeiInit(void); - void qeiObjectInit(QEIDriver *qeip); - void qeiStart(QEIDriver *qeip, const QEIConfig *config); - void qeiStop(QEIDriver *qeip); - void qeiEnable(QEIDriver *qeip); - void qeiDisable(QEIDriver *qeip); - qeicnt_t qeiGetCount(QEIDriver *qeip); - qeidelta_t qeiUpdate(QEIDriver *qeip); - qeidelta_t qeiUpdateI(QEIDriver *qeip); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_QEI == TRUE */ - -#endif /* HAL_QEI_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_rng.h b/ChibiOS_16.1.5/community/os/hal/include/hal_rng.h deleted file mode 100644 index 0e3c484..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_rng.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - RNG for ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _RNG_H_ -#define _RNG_H_ - -#if (HAL_USE_RNG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief Enables the @p rngAcquireBus() and @p rngReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(RNG_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define RNG_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - RNG_UNINIT, /* Not initialized. */ - RNG_STOP, /* Stopped. */ - RNG_READY, /* Ready. */ -} rngstate_t; - -#include "hal_rng_lld.h" - - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @name Low level driver helper macros - * @{ - */ - -/** - * @brief Wakes up the waiting thread. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @notapi - */ -#define _rng_wakeup_isr(rngp) { \ - osalSysLockFromISR(); \ - osalThreadResumeI(&(rngp)->thread, MSG_OK); \ - osalSysUnlockFromISR(); \ -} - -/** - * @brief Common ISR code. - * @details This code handles the portable part of the ISR code: - * - Callback invocation. - * - Waiting thread wakeup, if any. - * - Driver state transitions. - * . - * @note This macro is meant to be used in the low level drivers - * implementation only. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @notapi - */ -#define _rng_isr_code(rngp, rng) { \ - if ((rngp)->config->end_cb) { \ - (rngp)->state = RNG_COMPLETE; \ - (rngp)->config->end_cb(rngp, rng); \ - if ((rngp)->state == RNG_COMPLETE) \ - (rngp)->state = RNG_READY; \ - } \ - else \ - (rngp)->state = RNG_READY; \ - _rng_wakeup_isr(rngp); \ -} - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void rngInit(void); - void rngObjectInit(RNGDriver *rngp); - void rngStart(RNGDriver *rngp, const RNGConfig *config); - void rngStop(RNGDriver *rngp); - msg_t rngWriteI(RNGDriver *rngp, uint8_t *buf, size_t n, systime_t timeout); - msg_t rngWrite(RNGDriver *rngp, uint8_t *buf, size_t n, systime_t timeout); -#if RNG_USE_MUTUAL_EXCLUSION == TRUE - void rngAcquireUnit(RNGDriver *rngp); - void rngReleaseUnit(RNGDriver *rngp); -#endif -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_RNG */ - -#endif /* _RNG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_timcap.h b/ChibiOS_16.1.5/community/os/hal/include/hal_timcap.h deleted file mode 100644 index bd43dd1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_timcap.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file timcap.h - * @brief TIMCAP Driver macros and structures. - * - * @addtogroup TIMCAP - * @{ - */ - -#ifndef _TIMCAP_H_ -#define _TIMCAP_H_ - -#include "ch.h" -#include "hal.h" - -#if (HAL_USE_TIMCAP == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - TIMCAP_UNINIT = 0, /**< Not initialized. */ - TIMCAP_STOP = 1, /**< Stopped. */ - TIMCAP_READY = 2, /**< Ready. */ - TIMCAP_WAITING = 3, /**< Waiting first edge. */ - TIMCAP_ACTIVE = 4, /**< Active cycle phase. */ - TIMCAP_IDLE = 5, /**< Idle cycle phase. */ -} timcapstate_t; - -/** - * @brief Type of a structure representing an TIMCAP driver. - */ -typedef struct TIMCAPDriver TIMCAPDriver; - - -/** - * @brief TIMCAP notification callback type. - * - * @param[in] timcapp pointer to a @p TIMCAPDriver object - */ -typedef void (*timcapcallback_t)(TIMCAPDriver *timcapp); - -#include "hal_timcap_lld.h" - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @name Macro Functions - * @{ - */ -/** - * @brief Enables the input capture. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @iclass - */ -#define timcapEnableI(timcapp) timcap_lld_enable(timcapp) - -/** - * @brief Disables the input capture. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @iclass - */ -#define timcapDisableI(timcapp) timcap_lld_disable(timcapp) - - - - -/** @} */ - -/** - * @name Low Level driver helper macros - * @{ - */ - - -/** - * @brief Common ISR code, TIMCAP channel 1 event. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -#define _timcap_isr_invoke_channel1_cb(timcapp) { \ - timcapstate_t previous_state = (timcapp)->state; \ - (timcapp)->state = TIMCAP_ACTIVE; \ - if (previous_state != TIMCAP_WAITING) \ - (timcapp)->config->capture_cb_array[0](timcapp); \ -} - -/** - * @brief Common ISR code, TIMCAP channel 2 event. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -#define _timcap_isr_invoke_channel2_cb(timcapp) { \ - timcapstate_t previous_state = (timcapp)->state; \ - (timcapp)->state = TIMCAP_ACTIVE; \ - if (previous_state != TIMCAP_WAITING) \ - (timcapp)->config->capture_cb_array[1](timcapp); \ -} - -/** - * @brief Common ISR code, TIMCAP channel 3 event. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -#define _timcap_isr_invoke_channel3_cb(timcapp) { \ - timcapstate_t previous_state = (timcapp)->state; \ - (timcapp)->state = TIMCAP_ACTIVE; \ - if (previous_state != TIMCAP_WAITING) \ - (timcapp)->config->capture_cb_array[2](timcapp); \ -} - -/** - * @brief Common ISR code, TIMCAP channel 4 event. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -#define _timcap_isr_invoke_channel4_cb(timcapp) { \ - timcapstate_t previous_state = (timcapp)->state; \ - (timcapp)->state = TIMCAP_ACTIVE; \ - if (previous_state != TIMCAP_WAITING) \ - (timcapp)->config->capture_cb_array[3](timcapp); \ -} - -/** - * @brief Common ISR code, TIMCAP timer overflow event. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -#define _timcap_isr_invoke_overflow_cb(timcapp) { \ - (timcapp)->config->overflow_cb(timcapp); \ -} -/** @} */ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void timcapInit(void); - void timcapObjectInit(TIMCAPDriver *timcapp); - void timcapStart(TIMCAPDriver *timcapp, const TIMCAPConfig *config); - void timcapStop(TIMCAPDriver *timcapp); - void timcapEnable(TIMCAPDriver *timcapp); - void timcapDisable(TIMCAPDriver *timcapp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_TIMCAP */ - -#endif /* _TIMCAP_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_usb_hid.h b/ChibiOS_16.1.5/community/os/hal/include/hal_usb_hid.h deleted file mode 100644 index 2a2d73a..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_usb_hid.h +++ /dev/null @@ -1,510 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_usb_hid.h - * @brief USB HID macros and structures. - * - * @addtogroup USB_HID - * @{ - */ - -#ifndef HAL_USB_HID_H -#define HAL_USB_HID_H - -#if (HAL_USE_USB_HID == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name HID specific messages. - * @{ - */ -#define HID_GET_REPORT 0x01U -#define HID_GET_IDLE 0x02U -#define HID_GET_PROTOCOL 0x03U -#define HID_SET_REPORT 0x09U -#define HID_SET_IDLE 0x0AU -#define HID_SET_PROTOCOL 0x0BU -/** @} */ - -/** - * @name HID classes - * @{ - */ -#define HID_INTERFACE_CLASS 0x03U -/** @} */ - -/** - * @name HID subclasses - * @{ - */ -#define HID_BOOT_INTERFACE 0x01U -/** @} */ - -/** - * @name HID descriptors - * @{ - */ -#define USB_DESCRIPTOR_HID 0x21U -#define HID_REPORT 0x22U -#define HID_PHYSICAL 0x23U -/** @} */ - -/** - * @name HID Report items - * @{ - */ -#define HID_REPORT_USAGE_PAGE 0x04 -#define HID_REPORT_USAGE 0x08 -#define HID_REPORT_LOGICAL_MINIMUM 0x14 -#define HID_REPORT_USAGE_MINIMUM 0x18 -#define HID_REPORT_LOGICAL_MAXIMUM 0x24 -#define HID_REPORT_USAGE_MAXIMUM 0x28 -#define HID_REPORT_REPORT_SIZE 0x74 -#define HID_REPORT_INPUT 0x80 -#define HID_REPORT_REPORT_COUNT 0x94 -#define HID_REPORT_COLLECTION 0xA0 -#define HID_REPORT_END_COLLECTION 0xC0 -/** @} */ - -/** - * @name HID Collection item definitions - * @{ - */ -#define HID_COLLECTION_PHYSICAL 0x00 -#define HID_COLLECTION_APPLICATION 0x01 -#define HID_COLLECTION_LOGICAL 0x02 -#define HID_COLLECTION_REPORT 0x03 -#define HID_COLLECTION_NAMED_ARRAY 0x04 -#define HID_COLLECTION_USAGE_SWITCH 0x05 -#define HID_COLLECTION_USAGE_MODIFIER 0x06 -/** @} */ - -/** - * @name HID Usage Page item definitions - * @{ - */ -#define HID_USAGE_PAGE_GENERIC_DESKTOP 0x01 -#define HID_USAGE_PAGE_SIMULATION 0x02 -#define HID_USAGE_PAGE_VR 0x03 -#define HID_USAGE_PAGE_SPORT 0x04 -#define HID_USAGE_PAGE_GAME 0x05 -#define HID_USAGE_PAGE_GENERIC_DEVICE 0x06 -#define HID_USAGE_PAGE_KEYBOARD_KEYPAD 0x07 -#define HID_USAGE_PAGE_LEDS 0x08 -#define HID_USAGE_PAGE_BUTTON 0x09 -#define HID_USAGE_PAGE_ORDINAL 0x0A -#define HID_USAGE_PAGE_TELEPHONY 0x0B -#define HID_USAGE_PAGE_CONSUMER 0x0C -#define HID_USAGE_PAGE_DIGITIZER 0x0D -#define HID_USAGE_PAGE_PID 0x0F -#define HID_USAGE_PAGE_UNICODE 0x10 -/** @} */ - -/** - * @name HID Usage item definitions - * @{ - */ -#define HID_USAGE_ALPHANUMERIC_DISPLAY 0x14 -#define HID_USAGE_MEDICAL_INSTRUMENTS 0x40 -#define HID_USAGE_MONITOR_PAGE1 0x80 -#define HID_USAGE_MONITOR_PAGE2 0x81 -#define HID_USAGE_MONITOR_PAGE3 0x82 -#define HID_USAGE_MONITOR_PAGE4 0x83 -#define HID_USAGE_POWER_PAGE1 0x84 -#define HID_USAGE_POWER_PAGE2 0x85 -#define HID_USAGE_POWER_PAGE3 0x86 -#define HID_USAGE_POWER_PAGE4 0x87 -#define HID_USAGE_BAR_CODE_SCANNER_PAGE 0x8C -#define HID_USAGE_SCALE_PAGE 0x8D -#define HID_USAGE_MSR_PAGE 0x8E -#define HID_USAGE_CAMERA_PAGE 0x90 -#define HID_USAGE_ARCADE_PAGE 0x91 - -#define HID_USAGE_POINTER 0x01 -#define HID_USAGE_MOUSE 0x02 -#define HID_USAGE_JOYSTICK 0x04 -#define HID_USAGE_GAMEPAD 0x05 -#define HID_USAGE_KEYBOARD 0x06 -#define HID_USAGE_KEYPAD 0x07 -#define HID_USAGE_MULTIAXIS_CONTROLLER 0x08 - -#define HID_USAGE_BUTTON1 0x01 -#define HID_USAGE_BUTTON2 0x02 -#define HID_USAGE_BUTTON3 0x03 -#define HID_USAGE_BUTTON4 0x04 -#define HID_USAGE_BUTTON5 0x05 -#define HID_USAGE_BUTTON6 0x06 -#define HID_USAGE_BUTTON7 0x07 -#define HID_USAGE_BUTTON8 0x08 - -#define HID_USAGE_X 0x30 -#define HID_USAGE_Y 0x31 -#define HID_USAGE_Z 0x32 -#define HID_USAGE_RX 0x33 -#define HID_USAGE_RY 0x34 -#define HID_USAGE_RZ 0x35 -#define HID_USAGE_VX 0x40 -#define HID_USAGE_VY 0x41 -#define HID_USAGE_VZ 0x42 -#define HID_USAGE_VBRX 0x43 -#define HID_USAGE_VBRY 0x44 -#define HID_USAGE_VBRZ 0x45 -#define HID_USAGE_VNO 0x46 -/** @} */ - -/** - * @name HID Input item definitions. - * @{ - */ -#define HID_INPUT_DATA_VAR_ABS 0x02 -#define HID_INPUT_CNST_VAR_ABS 0x03 -#define HID_INPUT_DATA_VAR_REL 0x06 -/** @} */ - -/** - * @name Helper macros for USB HID descriptors - * @{ - */ -/* - * @define HID Descriptor size. - */ -#define USB_DESC_HID_SIZE 9U - -/** - * @brief HID Descriptor helper macro. - * @note This macro can only be used with a single HID report descriptor - */ -#define USB_DESC_HID(bcdHID, bCountryCode, bNumDescriptors, \ - bDescriptorType, wDescriptorLength) \ - USB_DESC_BYTE(USB_DESC_HID_SIZE), \ - USB_DESC_BYTE(USB_DESCRIPTOR_HID), \ - USB_DESC_BCD(bcdHID), \ - USB_DESC_BYTE(bCountryCode), \ - USB_DESC_BYTE(bNumDescriptors), \ - USB_DESC_BYTE(bDescriptorType), \ - USB_DESC_WORD(wDescriptorLength) - -/** - * @brief HID Report Usage Page item helper macro (Single byte). - */ -#define HID_USAGE_PAGE_B(up) \ - USB_DESC_BYTE(HID_REPORT_USAGE_PAGE | 0x01), \ - USB_DESC_BYTE(up) - -/** - * @brief HID Report Usage Page item helper macro (Double byte). - */ -#define HID_USAGE_PAGE_W(up) \ - USB_DESC_BYTE(HID_REPORT_USAGE_PAGE | 0x02), \ - USB_DESC_WORD(up) - -/** - * @brief HID Report Usage item helper macro (Single byte). - */ -#define HID_USAGE_B(u) \ - USB_DESC_BYTE(HID_REPORT_USAGE | 0x01), \ - USB_DESC_BYTE(u) - -/** - * @brief HID Report Usage item helper macro (Double byte). - */ -#define HID_USAGE_W(u) \ - USB_DESC_BYTE(HID_REPORT_USAGE | 0x02), \ - USB_DESC_WORD(u) - -/** - * @brief HID Report Collection item helper macro (Single Byte). - */ -#define HID_COLLECTION_B(c) \ - USB_DESC_BYTE(HID_REPORT_COLLECTION | 0x01), \ - USB_DESC_BYTE(c) - -/** - * @brief HID Report Collection item helper macro (Double Byte). - */ -#define HID_COLLECTION_W(c) \ - USB_DESC_BYTE(HID_REPORT_COLLECTION | 0x02), \ - USB_DESC_WORD(c) - -/** - * @brief HID Report End Collection item helper macro. - */ -#define HID_END_COLLECTION \ - USB_DESC_BYTE(HID_REPORT_END_COLLECTION) - -/** - * @brief HID Report Usage Minimum item helper macro (Single byte). - */ -#define HID_USAGE_MINIMUM_B(x) \ - USB_DESC_BYTE(HID_REPORT_USAGE_MINIMUM | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Usage Minimum item helper macro (Double byte). - */ -#define HID_USAGE_MINIMUM_W(x) \ - USB_DESC_BYTE(HID_REPORT_USAGE_MINIMUM | 0x02), \ - USB_DESC_WORD(x) - -/** - * @brief HID Report Usage Maximum item helper macro (Single byte). - */ -#define HID_USAGE_MAXIMUM_B(x) \ - USB_DESC_BYTE(HID_REPORT_USAGE_MAXIMUM | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Usage Maximum item helper macro (Double byte). - */ -#define HID_USAGE_MAXIMUM_W(x) \ - USB_DESC_BYTE(HID_REPORT_USAGE_MAXIMUM | 0x02), \ - USB_DESC_WORD(x) - -/** - * @brief HID Report Logical Minimum item helper macro (Single byte). - */ -#define HID_LOGICAL_MINIMUM_B(x) \ - USB_DESC_BYTE(HID_REPORT_LOGICAL_MINIMUM | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Logical Minimum item helper macro (Double byte). - */ -#define HID_LOGICAL_MINIMUM_W(x) \ - USB_DESC_BYTE(HID_REPORT_LOGICAL_MINIMUM | 0x02), \ - USB_DESC_WORD(x) - -/** - * @brief HID Report Logical Maximum item helper macro (Single byte). - */ -#define HID_LOGICAL_MAXIMUM_B(x) \ - USB_DESC_BYTE(HID_REPORT_LOGICAL_MAXIMUM | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Logical Maximum item helper macro (Double byte). - */ -#define HID_LOGICAL_MAXIMUM_W(x) \ - USB_DESC_BYTE(HID_REPORT_LOGICAL_MAXIMUM | 0x02), \ - USB_DESC_WORD(x) - -/** - * @brief HID Report Count item helper macro (Single byte). - */ -#define HID_REPORT_COUNT_B(x) \ - USB_DESC_BYTE(HID_REPORT_REPORT_COUNT | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Count item helper macro (Double byte). - */ -#define HID_REPORT_COUNT_W(x) \ - USB_DESC_BYTE(HID_REPORT_REPORT_COUNT | 0x02), \ - USB_DESC_WORD(x) - -/** - * @brief HID Report Size item helper macro (Single byte). - */ -#define HID_REPORT_SIZE_B(x) \ - USB_DESC_BYTE(HID_REPORT_REPORT_SIZE | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Size item helper macro (Double byte). - */ -#define HID_REPORT_SIZE_W(x) \ - USB_DESC_BYTE(HID_REPORT_REPORT_SIZE | 0x02), \ - USB_DESC_WORD(x) - -/** - * @brief HID Report Input item helper macro (Single byte). - */ -#define HID_INPUT_B(x) \ - USB_DESC_BYTE(HID_REPORT_INPUT | 0x01), \ - USB_DESC_BYTE(x) - -/** - * @brief HID Report Input item helper macro (Double byte). - */ -#define HID_INPUT_W(x) \ - USB_DESC_BYTE(HID_REPORT_INPUT | 0x02), \ - USB_DESC_WORD(x) -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name USB HID configuration options - * @{ - */ -/** - * @brief USB HID buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(USB_HID_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define USB_HID_BUFFERS_SIZE 256 -#endif - -/** - * @brief USB HID number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(USB_HID_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define USB_HID_BUFFERS_NUMBER 2 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if HAL_USE_USB == FALSE -#error "USB HID Driver requires HAL_USE_USB" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - HID_UNINIT = 0, /**< Not initialized. */ - HID_STOP = 1, /**< Stopped. */ - HID_READY = 2 /**< Ready. */ -} hidstate_t; - -/** - * @brief Structure representing a USB HID driver. - */ -typedef struct USBHIDDriver USBHIDDriver; - -/** - * @brief USB HID Driver configuration structure. - * @details An instance of this structure must be passed to @p hidStart() - * in order to configure and start the driver operations. - */ -typedef struct { - /** - * @brief USB driver to use. - */ - USBDriver *usbp; - /** - * @brief Interrupt IN endpoint used for outgoing data transfer. - */ - usbep_t int_in; - /** - * @brief Interrupt OUT endpoint used for incoming data transfer. - */ - usbep_t int_out; -} USBHIDConfig; - -/** - * @brief @p USBHIDDriver specific data. - */ -#define _usb_hid_driver_data \ - _base_asynchronous_channel_data \ - /* Driver state.*/ \ - hidstate_t state; \ - /* Input buffers queue.*/ \ - input_buffers_queue_t ibqueue; \ - /* Output queue.*/ \ - output_buffers_queue_t obqueue; \ - /* Input buffer.*/ \ - uint8_t ib[BQ_BUFFER_SIZE(USB_HID_BUFFERS_NUMBER, \ - USB_HID_BUFFERS_SIZE)]; \ - /* Output buffer.*/ \ - uint8_t ob[BQ_BUFFER_SIZE(USB_HID_BUFFERS_NUMBER, \ - USB_HID_BUFFERS_SIZE)]; \ - /* End of the mandatory fields.*/ \ - /* Current configuration data.*/ \ - const USBHIDConfig *config; - -/** - * @brief @p USBHIDDriver specific methods. - */ -#define _usb_hid_driver_methods \ - _base_asynchronous_channel_methods \ - /* Buffer flush method.*/ \ - void (*flush)(void *instance); - -/** - * @extends BaseAsynchronousChannelVMT - * - * @brief @p USBHIDDriver virtual methods table. - */ -struct USBHIDDriverVMT { - _usb_hid_driver_methods -}; - -/** - * @extends BaseAsynchronousChannel - * - * @brief Full duplex USB HID driver class. - * @details This class extends @p BaseAsynchronousChannel by adding physical - * I/O queues. - */ -struct USBHIDDriver { - /** @brief Virtual Methods Table.*/ - const struct USBHIDDriverVMT *vmt; - _usb_hid_driver_data -}; - -#define USB_DRIVER_EXT_FIELDS \ - USBHIDDriver hid - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ -#ifdef __cplusplus -extern "C" { -#endif - void hidInit(void); - void hidObjectInit(USBHIDDriver *uhdp); - void hidStart(USBHIDDriver *uhdp, const USBHIDConfig *config); - void hidStop(USBHIDDriver *uhdp); - void hidDisconnectI(USBHIDDriver *uhdp); - void hidConfigureHookI(USBHIDDriver *uhdp); - bool hidRequestsHook(USBDriver *usbp); - void hidDataTransmitted(USBDriver *usbp, usbep_t ep); - void hidDataReceived(USBDriver *usbp, usbep_t ep); - size_t hidWriteReport(USBHIDDriver *uhdp, uint8_t *bp, size_t n); - size_t hidWriteReportt(USBHIDDriver *uhdp, uint8_t *bp, size_t n, systime_t timeout); - size_t hidReadReport(USBHIDDriver *uhdp, uint8_t *bp, size_t n); - size_t hidReadReportt(USBHIDDriver *uhdp, uint8_t *bp, size_t n, systime_t timeout); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_USB_HID */ - -#endif /* HAL_USB_HID_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/hal_usbh.h b/ChibiOS_16.1.5/community/os/hal/include/hal_usbh.h deleted file mode 100644 index 5fd0047..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/hal_usbh.h +++ /dev/null @@ -1,436 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_H_ -#define USBH_H_ - -#include "hal.h" - - -#ifndef HAL_USBH_USE_FTDI -#define HAL_USBH_USE_FTDI FALSE -#endif - -#ifndef HAL_USBH_USE_HUB -#define HAL_USBH_USE_HUB FALSE -#endif - -#ifndef HAL_USBH_USE_MSD -#define HAL_USBH_USE_MSD FALSE -#endif - -#ifndef HAL_USBH_USE_UVC -#define HAL_USBH_USE_UVC FALSE -#endif - -#if (HAL_USE_USBH == TRUE) || defined(__DOXYGEN__) - -#include "osal.h" -#include "usbh/list.h" -#include "usbh/defs.h" - -/* TODO: - * - * - Integrate VBUS power switching functionality to the API. - * - */ - - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !HAL_USBH_USE_HUB -#define USBH_MAX_ADDRESSES 1 -#else -#define USBH_MAX_ADDRESSES (HAL_USBHHUB_MAX_PORTS + 1) -#endif - -enum usbh_status { - USBH_STATUS_STOPPED = 0, - USBH_STATUS_STARTED, - USBH_STATUS_SUSPENDED, -}; - -enum usbh_devstatus { - USBH_DEVSTATUS_DISCONNECTED = 0, - USBH_DEVSTATUS_ATTACHED, - USBH_DEVSTATUS_CONNECTED, - USBH_DEVSTATUS_DEFAULT, - USBH_DEVSTATUS_ADDRESS, - USBH_DEVSTATUS_CONFIGURED, -}; - -enum usbh_devspeed { - USBH_DEVSPEED_LOW = 0, - USBH_DEVSPEED_FULL, - USBH_DEVSPEED_HIGH, -}; - -enum usbh_epdir { - USBH_EPDIR_IN = 0x80, - USBH_EPDIR_OUT = 0 -}; - -enum usbh_eptype { - USBH_EPTYPE_CTRL = 0, - USBH_EPTYPE_ISO = 1, - USBH_EPTYPE_BULK = 2, - USBH_EPTYPE_INT = 3, -}; - -enum usbh_epstatus { - USBH_EPSTATUS_UNINITIALIZED = 0, - USBH_EPSTATUS_CLOSED, - USBH_EPSTATUS_OPEN, - USBH_EPSTATUS_HALTED, -}; - -enum usbh_urbstatus { - USBH_URBSTATUS_UNINITIALIZED = 0, - USBH_URBSTATUS_INITIALIZED, - USBH_URBSTATUS_PENDING, -// USBH_URBSTATUS_QUEUED, - USBH_URBSTATUS_ERROR, - USBH_URBSTATUS_TIMEOUT, - USBH_URBSTATUS_CANCELLED, - USBH_URBSTATUS_STALL, - USBH_URBSTATUS_DISCONNECTED, -// USBH_URBSTATUS_EPCLOSED, - USBH_URBSTATUS_OK, -}; - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/* forward declarations */ -typedef struct USBHDriver USBHDriver; -typedef struct usbh_port usbh_port_t; -typedef struct usbh_device usbh_device_t; -typedef struct usbh_ep usbh_ep_t; -typedef struct usbh_urb usbh_urb_t; -typedef struct usbh_baseclassdriver usbh_baseclassdriver_t; -typedef struct usbh_classdriverinfo usbh_classdriverinfo_t; -#if HAL_USBH_USE_HUB -typedef struct USBHHubDriver USBHHubDriver; -#endif - -/* typedefs */ -typedef enum usbh_status usbh_status_t; -typedef enum usbh_devspeed usbh_devspeed_t; -typedef enum usbh_devstatus usbh_devstatus_t; -typedef enum usbh_epdir usbh_epdir_t; -typedef enum usbh_eptype usbh_eptype_t; -typedef enum usbh_epstatus usbh_epstatus_t; -typedef enum usbh_urbstatus usbh_urbstatus_t; -typedef uint16_t usbh_portstatus_t; -typedef uint16_t usbh_portcstatus_t; -typedef void (*usbh_completion_cb)(usbh_urb_t *); - -/* include the low level driver; the required definitions are above */ -#include "hal_usbh_lld.h" - -#define USBH_DEFINE_BUFFER(type, name) USBH_LLD_DEFINE_BUFFER(type, name) - -struct usbh_urb { - usbh_ep_t *ep; - - void *userData; - usbh_completion_cb callback; - - const void *setup_buff; - void *buff; - uint32_t requestedLength; - uint32_t actualLength; - - usbh_urbstatus_t status; - - thread_reference_t waitingThread; - thread_reference_t abortingThread; - - /* Low level part */ - _usbh_urb_ll_data -}; - -struct usbh_ep { - usbh_device_t *device; - usbh_ep_t *next; - - usbh_epstatus_t status; - uint8_t address; - bool in; - usbh_eptype_t type; - uint16_t wMaxPacketSize; - uint8_t bInterval; - - /* debug */ - const char *name; - - /* Low-level part */ - _usbh_ep_ll_data -}; - -struct usbh_device { - USBHDriver *host; /* shortcut to host */ - - usbh_ep_t ctrl; - usbh_ep_t *endpoints; - - usbh_baseclassdriver_t *drivers; - - uint16_t langID0; - - usbh_devstatus_t status; - usbh_devspeed_t speed; - - USBH_DEFINE_BUFFER(usbh_device_descriptor_t, devDesc); - unsigned char align_bytes[2]; - USBH_DEFINE_BUFFER(usbh_config_descriptor_t, basicConfigDesc); - - uint8_t *fullConfigurationDescriptor; - uint8_t keepFullCfgDesc; - - uint8_t address; - uint8_t bConfiguration; - - /* Low level part */ - _usbh_device_ll_data -}; - - -struct usbh_port { -#if HAL_USBH_USE_HUB - USBHHubDriver *hub; -#endif - - usbh_portstatus_t status; - usbh_portcstatus_t c_status; - - usbh_port_t *next; - - uint8_t number; - - usbh_device_t device; - - /* Low level part */ - _usbh_port_ll_data -}; - -struct USBHDriver { - usbh_status_t status; - uint8_t address_bitmap[(USBH_MAX_ADDRESSES + 7) / 8]; - - usbh_port_t rootport; - -#if HAL_USBH_USE_HUB - struct list_head hubs; -#endif - - /* Low level part */ - _usbhdriver_ll_data - -#if USBH_DEBUG_ENABLE - /* debug */ - uint8_t dbg_buff[USBH_DEBUG_BUFFER]; - THD_WORKING_AREA(waDebug, 512); - input_queue_t iq; -#endif -}; - - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_USBH_USE_OTG1 -extern USBHDriver USBHD1; -#endif - -#if STM32_USBH_USE_OTG2 -extern USBHDriver USBHD2; -#endif - - -/*===========================================================================*/ -/* Main driver API. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - - /* Main functions */ - void usbhObjectInit(USBHDriver *usbh); - void usbhInit(void); - void usbhStart(USBHDriver *usbh); - void usbhStop(USBHDriver *usbh); - void usbhSuspend(USBHDriver *usbh); - void usbhResume(USBHDriver *usbh); - - /* Device-related */ -#if USBH_DEBUG_ENABLE && USBH_DEBUG_ENABLE_INFO - void usbhDevicePrintInfo(usbh_device_t *dev); - void usbhDevicePrintConfiguration(const uint8_t *descriptor, uint16_t rem); -#else -# define usbhDevicePrintInfo(dev) do {} while(0) -# define usbhDevicePrintConfiguration(descriptor, rem) do {} while(0) -#endif - bool usbhDeviceReadString(usbh_device_t *dev, char *dest, uint8_t size, - uint8_t index, uint16_t langID); - static inline usbh_port_t *usbhDeviceGetPort(usbh_device_t *dev) { - return container_of(dev, usbh_port_t, device); - } - - /* Synchronous API */ - usbh_urbstatus_t usbhBulkTransfer(usbh_ep_t *ep, - void *data, - uint32_t len, - uint32_t *actual_len, - systime_t timeout); - usbh_urbstatus_t usbhControlRequest(usbh_device_t *dev, - uint8_t bmRequestType, - uint8_t bRequest, - uint16_t wValue, - uint16_t wIndex, - uint16_t wLength, - uint8_t *buff); - usbh_urbstatus_t usbhControlRequestExtended(usbh_device_t *dev, - const usbh_control_request_t *req, - uint8_t *buff, - uint32_t *actual_len, - systime_t timeout); - - /* Standard request helpers */ - bool usbhStdReqGetDeviceDescriptor(usbh_device_t *dev, - uint16_t wLength, - uint8_t *buf); - bool usbhStdReqGetConfigurationDescriptor(usbh_device_t *dev, - uint8_t index, - uint16_t wLength, - uint8_t *buf); - bool usbhStdReqGetStringDescriptor(usbh_device_t *dev, - uint8_t index, - uint16_t langID, - uint16_t wLength, - uint8_t *buf); - bool usbhStdReqSetInterface(usbh_device_t *dev, - uint8_t bInterfaceNumber, - uint8_t bAlternateSetting); - bool usbhStdReqGetInterface(usbh_device_t *dev, - uint8_t bInterfaceNumber, - uint8_t *bAlternateSetting); - - /* Endpoint/pipe management */ - void usbhEPObjectInit(usbh_ep_t *ep, usbh_device_t *dev, const usbh_endpoint_descriptor_t *desc); - static inline void usbhEPOpen(usbh_ep_t *ep) { - osalDbgCheck(ep != 0); - osalSysLock(); - osalDbgAssert(ep->status == USBH_EPSTATUS_CLOSED, "invalid state"); - usbh_lld_ep_open(ep); - ep->next = ep->device->endpoints; - ep->device->endpoints = ep; - osalSysUnlock(); - } - static inline void usbhEPCloseS(usbh_ep_t *ep) { - osalDbgCheck(ep != 0); - osalDbgCheckClassS(); - osalDbgAssert(ep->status != USBH_EPSTATUS_UNINITIALIZED, "invalid state"); - if (ep->status == USBH_EPSTATUS_CLOSED) { - osalOsRescheduleS(); - return; - } - usbh_lld_ep_close(ep); - } - static inline void usbhEPClose(usbh_ep_t *ep) { - osalSysLock(); - usbhEPCloseS(ep); - osalSysUnlock(); - } - static inline void usbhEPResetI(usbh_ep_t *ep) { - osalDbgCheckClassI(); - osalDbgCheck(ep != NULL); - usbh_lld_epreset(ep); - } - static inline bool usbhEPIsPeriodic(usbh_ep_t *ep) { - osalDbgCheck(ep != NULL); - return (ep->type & 1) != 0; - } - static inline bool usbhURBIsBusy(usbh_urb_t *urb) { - osalDbgCheck(urb != NULL); - return (urb->status == USBH_URBSTATUS_PENDING); - } - static inline void usbhEPSetName(usbh_ep_t *ep, const char *name) { - ep->name = name; - } - - /* URB management */ - void usbhURBObjectInit(usbh_urb_t *urb, usbh_ep_t *ep, usbh_completion_cb callback, - void *user, void *buff, uint32_t len); - void usbhURBObjectResetI(usbh_urb_t *urb); - void usbhURBSubmitI(usbh_urb_t *urb); - bool usbhURBCancelI(usbh_urb_t *urb); - msg_t usbhURBSubmitAndWaitS(usbh_urb_t *urb, systime_t timeout); - void usbhURBCancelAndWaitS(usbh_urb_t *urb); - msg_t usbhURBWaitTimeoutS(usbh_urb_t *urb, systime_t timeout); - - /* Main loop */ - void usbhMainLoop(USBHDriver *usbh); - -#ifdef __cplusplus -} -#endif - - -/*===========================================================================*/ -/* Class driver definitions and API. */ -/*===========================================================================*/ - -typedef struct usbh_classdriver_vmt usbh_classdriver_vmt_t; -struct usbh_classdriver_vmt { - usbh_baseclassdriver_t *(*load)(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem); - void (*unload)(usbh_baseclassdriver_t *drv); -}; - -struct usbh_classdriverinfo { - int16_t class; - int16_t subclass; - int16_t protocol; - const char *name; - const usbh_classdriver_vmt_t *vmt; -}; - -#define _usbh_base_classdriver_data \ - const usbh_classdriverinfo_t *info; \ - usbh_device_t *dev; \ - usbh_baseclassdriver_t *next; - -struct usbh_baseclassdriver { - _usbh_base_classdriver_data -}; - - -/*===========================================================================*/ -/* Helper functions. */ -/*===========================================================================*/ -#include /* descriptor iterators */ -#include /* debug */ - -#endif - -#endif /* USBH_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/debug.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/debug.h deleted file mode 100644 index 5120121..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/debug.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - - -#ifndef USBH_DEBUG_H_ -#define USBH_DEBUG_H_ - -#include "hal_usbh.h" - -#if HAL_USE_USBH - -//TODO: Debug is only for USBHD1, make it generic. - -#if USBH_DEBUG_ENABLE - void usbDbgPrintf(const char *fmt, ...); - void usbDbgPuts(const char *s); - void usbDbgInit(USBHDriver *host); - void usbDbgReset(void); - void usbDbgSystemHalted(void); -#else -#define usbDbgPrintf(fmt, ...) do {} while(0) -#define usbDbgPuts(s) do {} while(0) -#define usbDbgInit(host) do {} while(0) -#define usbDbgReset() do {} while(0) -#define usbDbgSystemHalted() do {} while(0) -#endif - -#endif - -#endif /* USBH_DEBUG_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/defs.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/defs.h deleted file mode 100644 index c3d8a9a..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/defs.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_DEFS_H_ -#define USBH_DEFS_H_ - -#include "hal.h" - -#if HAL_USE_USBH - -#include "osal.h" - -#ifdef __IAR_SYSTEMS_ICC__ -#define PACKED_STRUCT typedef PACKED_VAR struct -#else -#define PACKED_STRUCT typedef struct PACKED_VAR -#endif - -PACKED_STRUCT { - uint8_t bLength; - uint8_t bDescriptorType; - uint16_t bcdUSB; - uint8_t bDeviceClass; - uint8_t bDeviceSubClass; - uint8_t bDeviceProtocol; - uint8_t bMaxPacketSize0; - uint16_t idVendor; - uint16_t idProduct; - uint16_t bcdDevice; - uint8_t iManufacturer; - uint8_t iProduct; - uint8_t iSerialNumber; - uint8_t bNumConfigurations; -} usbh_device_descriptor_t; -#define USBH_DT_DEVICE 0x01 -#define USBH_DT_DEVICE_SIZE 18 - -PACKED_STRUCT { - uint8_t bLength; - uint8_t bDescriptorType; - uint16_t wTotalLength; - uint8_t bNumInterfaces; - uint8_t bConfigurationValue; - uint8_t iConfiguration; - uint8_t bmAttributes; - uint8_t bMaxPower; -} usbh_config_descriptor_t; -#define USBH_DT_CONFIG 0x02 -#define USBH_DT_CONFIG_SIZE 9 - -PACKED_STRUCT { - uint8_t bLength; - uint8_t bDescriptorType; - uint16_t wData[1]; -} usbh_string_descriptor_t; -#define USBH_DT_STRING 0x03 -#define USBH_DT_STRING_SIZE 2 - -PACKED_STRUCT { - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bInterfaceNumber; - uint8_t bAlternateSetting; - uint8_t bNumEndpoints; - uint8_t bInterfaceClass; - uint8_t bInterfaceSubClass; - uint8_t bInterfaceProtocol; - uint8_t iInterface; -} usbh_interface_descriptor_t; -#define USBH_DT_INTERFACE 0x04 -#define USBH_DT_INTERFACE_SIZE 9 - -PACKED_STRUCT { - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bEndpointAddress; - uint8_t bmAttributes; - uint16_t wMaxPacketSize; - uint8_t bInterval; -} usbh_endpoint_descriptor_t; -#define USBH_DT_ENDPOINT 0x05 -#define USBH_DT_ENDPOINT_SIZE 7 - -PACKED_STRUCT { - uint8_t bLength; - uint8_t bDescriptorType; - uint8_t bFirstInterface; - uint8_t bInterfaceCount; - uint8_t bFunctionClass; - uint8_t bFunctionSubClass; - uint8_t bFunctionProtocol; - uint8_t iFunction; -} usbh_ia_descriptor_t; -#define USBH_DT_INTERFACE_ASSOCIATION 0x0b -#define USBH_DT_INTERFACE_ASSOCIATION_SIZE 8 - -PACKED_STRUCT { - uint8_t bDescLength; - uint8_t bDescriptorType; - uint8_t bNbrPorts; - uint16_t wHubCharacteristics; - uint8_t bPwrOn2PwrGood; - uint8_t bHubContrCurrent; - uint32_t DeviceRemovable; -} usbh_hub_descriptor_t; -#define USBH_DT_HUB 0x29 -#define USBH_DT_HUB_SIZE (7 + 4) - -PACKED_STRUCT { - uint8_t bmRequestType; - uint8_t bRequest; - uint16_t wValue; - uint16_t wIndex; - uint16_t wLength; -} usbh_control_request_t; - - -#define USBH_REQ_GET_STATUS 0x00 -#define USBH_REQ_CLEAR_FEATURE 0x01 -#define USBH_REQ_SET_FEATURE 0x03 -#define USBH_REQ_SET_ADDRESS 0x05 -#define USBH_REQ_GET_DESCRIPTOR 0x06 -#define USBH_REQ_SET_DESCRIPTOR 0x07 -#define USBH_REQ_GET_CONFIGURATION 0x08 -#define USBH_REQ_SET_CONFIGURATION 0x09 -#define USBH_REQ_GET_INTERFACE 0x0A -#define USBH_REQ_SET_INTERFACE 0x0B -#define USBH_REQ_SYNCH_FRAME 0x0C - - -#define USBH_REQTYPE_IN 0x80 -#define USBH_REQTYPE_OUT 0x00 - -#define USBH_REQTYPE_STANDARD 0x00 -#define USBH_REQTYPE_CLASS 0x20 -#define USBH_REQTYPE_VENDOR 0x40 - -#define USBH_REQTYPE_DEVICE 0x00 -#define USBH_REQTYPE_INTERFACE 0x01 -#define USBH_REQTYPE_ENDPOINT 0x02 -#define USBH_REQTYPE_OTHER 0x03 - -#endif - - -#endif /* USBH_DEFS_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/desciter.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/desciter.h deleted file mode 100644 index 52b0c98..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/desciter.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - - -#ifndef USBH_DESCITER_H_ -#define USBH_DESCITER_H_ - -#include "hal.h" - -#if HAL_USE_USBH - -#include "usbh/defs.h" - - -/* DESCRIPTOR PARSING */ -#define _generic_iterator_fields \ - const uint8_t *curr; \ - uint16_t rem; \ - bool valid; - -typedef struct { - _generic_iterator_fields -} generic_iterator_t; - -typedef struct { - _generic_iterator_fields - const usbh_ia_descriptor_t *iad; -} if_iterator_t; - -void cfg_iter_init(generic_iterator_t *icfg, const uint8_t *buff, uint16_t rem); -void if_iter_init(if_iterator_t *iif, const generic_iterator_t *icfg); -void ep_iter_init(generic_iterator_t *iep, const if_iterator_t *iif); -void cs_iter_init(generic_iterator_t *ics, const generic_iterator_t *iter); -void if_iter_next(if_iterator_t *iif); -void ep_iter_next(generic_iterator_t *iep); -void cs_iter_next(generic_iterator_t *ics); -static inline const usbh_config_descriptor_t *cfg_get(generic_iterator_t *icfg) { - return (const usbh_config_descriptor_t *)icfg->curr; -} -static inline const usbh_interface_descriptor_t *if_get(if_iterator_t *iif) { - return (const usbh_interface_descriptor_t *)iif->curr; -} -static inline const usbh_endpoint_descriptor_t *ep_get(generic_iterator_t *iep) { - return (const usbh_endpoint_descriptor_t *)iep->curr; -} - -#endif - -#endif /* USBH_DESCITER_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/ftdi.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/ftdi.h deleted file mode 100644 index ad6b4cd..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/ftdi.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_FTDI_H_ -#define USBH_FTDI_H_ - -#include "hal_usbh.h" - -#if HAL_USE_USBH && HAL_USBH_USE_FTDI - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ -#define USBHFTDI_FRAMING_DATABITS_7 (0x7 << 0) -#define USBHFTDI_FRAMING_DATABITS_8 (0x8 << 0) -#define USBHFTDI_FRAMING_PARITY_NONE (0x0 << 8) -#define USBHFTDI_FRAMING_PARITY_NONE (0x0 << 8) -#define USBHFTDI_FRAMING_PARITY_ODD (0x1 << 8) -#define USBHFTDI_FRAMING_PARITY_EVEN (0x2 << 8) -#define USBHFTDI_FRAMING_PARITY_MARK (0x3 << 8) -#define USBHFTDI_FRAMING_PARITY_SPACE (0x4 << 8) -#define USBHFTDI_FRAMING_STOP_BITS_1 (0x0 << 11) -#define USBHFTDI_FRAMING_STOP_BITS_15 (0x1 << 11) -#define USBHFTDI_FRAMING_STOP_BITS_2 (0x2 << 11) - -#define USBHFTDI_HANDSHAKE_NONE (0x0) -#define USBHFTDI_HANDSHAKE_RTS_CTS (0x1) -#define USBHFTDI_HANDSHAKE_DTR_DSR (0x2) -#define USBHFTDI_HANDSHAKE_XON_XOFF (0x4) - - - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ -typedef struct { - uint32_t speed; - uint16_t framing; - uint8_t handshake; - uint8_t xon_character; - uint8_t xoff_character; -} USBHFTDIPortConfig; - -typedef enum { - USBHFTDI_TYPE_A, - USBHFTDI_TYPE_B, - USBHFTDI_TYPE_H, -} usbhftdi_type_t; - -typedef enum { - USBHFTDIP_STATE_UNINIT = 0, - USBHFTDIP_STATE_STOP = 1, - USBHFTDIP_STATE_ACTIVE = 2, - USBHFTDIP_STATE_READY = 3 -} usbhftdip_state_t; - - -#define _ftdi_port_driver_methods \ - _base_asynchronous_channel_methods - -struct FTDIPortDriverVMT { - _ftdi_port_driver_methods -}; - -typedef struct USBHFTDIPortDriver USBHFTDIPortDriver; -typedef struct USBHFTDIDriver USBHFTDIDriver; - -struct USBHFTDIPortDriver { - /* inherited from abstract asyncrhonous channel driver */ - const struct FTDIPortDriverVMT *vmt; - _base_asynchronous_channel_data - - USBHFTDIDriver *ftdip; - - usbhftdip_state_t state; - - usbh_ep_t epin; - usbh_urb_t iq_urb; - threads_queue_t iq_waiting; - uint32_t iq_counter; - USBH_DEFINE_BUFFER(uint8_t, iq_buff[64]); - uint8_t *iq_ptr; - - - usbh_ep_t epout; - usbh_urb_t oq_urb; - threads_queue_t oq_waiting; - uint32_t oq_counter; - USBH_DEFINE_BUFFER(uint8_t, oq_buff[64]); - uint8_t *oq_ptr; - - virtual_timer_t vt; - uint8_t ifnum; - - USBHFTDIPortDriver *next; -}; - -typedef struct USBHFTDIDriver { - /* inherited from abstract class driver */ - _usbh_base_classdriver_data - - usbhftdi_type_t type; - USBHFTDIPortDriver *ports; - - mutex_t mtx; -} USBHFTDIDriver; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ -extern USBHFTDIDriver USBHFTDID[HAL_USBHFTDI_MAX_INSTANCES]; -extern USBHFTDIPortDriver FTDIPD[HAL_USBHFTDI_MAX_PORTS]; - -#ifdef __cplusplus -extern "C" { -#endif - /* FTDI device driver */ - void usbhftdiObjectInit(USBHFTDIDriver *ftdip); - - /* FTDI port driver */ - void usbhftdipObjectInit(USBHFTDIPortDriver *ftdipp); - void usbhftdipStart(USBHFTDIPortDriver *ftdipp, const USBHFTDIPortConfig *config); - void usbhftdipStop(USBHFTDIPortDriver *ftdipp); -#ifdef __cplusplus -} -#endif - - -#endif - -#endif /* USBH_FTDI_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/hub.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/hub.h deleted file mode 100644 index 07e88e6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/hub.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_HUB_H_ -#define USBH_HUB_H_ - -#include "hal_usbh.h" - -#if HAL_USE_USBH -#if HAL_USBH_USE_HUB - -typedef struct USBHHubDriver { - /* inherited from abstract class driver */ - _usbh_base_classdriver_data - - struct list_head node; - - usbh_ep_t epint; - usbh_urb_t urb; - - USBH_DEFINE_BUFFER(uint8_t, scbuff[4]); - volatile uint32_t statuschange; - uint16_t status; - uint16_t c_status; - - usbh_port_t *ports; - - USBH_DEFINE_BUFFER(usbh_hub_descriptor_t, hubDesc); - - /* Low level part */ - _usbh_hub_ll_data - -} USBHHubDriver; - -extern USBHHubDriver USBHHUBD[HAL_USBHHUB_MAX_INSTANCES]; - - -usbh_urbstatus_t usbhhubControlRequest(USBHDriver *host, USBHHubDriver *hub, - uint8_t bmRequestType, - uint8_t bRequest, - uint16_t wValue, - uint16_t wIndex, - uint16_t wLength, - uint8_t *buf); - - -static inline usbh_urbstatus_t usbhhubClearFeaturePort(usbh_port_t *port, uint8_t feature) { - return usbhhubControlRequest(port->device.host, port->hub, - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER, - USBH_REQ_CLEAR_FEATURE, - feature, - port->number, - 0, - 0); -} - -static inline usbh_urbstatus_t usbhhubClearFeatureHub(USBHDriver *host, USBHHubDriver *hub, uint8_t feature) { - return usbhhubControlRequest(host, hub, - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE, - USBH_REQ_CLEAR_FEATURE, - feature, - 0, - 0, - 0); -} - -static inline usbh_urbstatus_t usbhhubSetFeaturePort(usbh_port_t *port, uint8_t feature) { - return usbhhubControlRequest(port->device.host, port->hub, - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER, - USBH_REQ_SET_FEATURE, - feature, - port->number, - 0, - 0); -} - -void usbhhubObjectInit(USBHHubDriver *hubdp); -#else - -static inline usbh_urbstatus_t usbhhubControlRequest(USBHDriver *host, - uint8_t bmRequestType, - uint8_t bRequest, - uint16_t wValue, - uint16_t wIndex, - uint16_t wLength, - uint8_t *buf) { - return usbh_lld_root_hub_request(host, bmRequestType, bRequest, wValue, wIndex, wLength, buf); -} - -static inline usbh_urbstatus_t usbhhubClearFeaturePort(usbh_port_t *port, uint8_t feature) { - return usbhhubControlRequest(port->device.host, - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER, - USBH_REQ_CLEAR_FEATURE, - feature, - port->number, - 0, - 0); -} - -static inline usbh_urbstatus_t usbhhubClearFeatureHub(USBHDriver *host, uint8_t feature) { - return usbhhubControlRequest(host, - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE, - USBH_REQ_CLEAR_FEATURE, - feature, - 0, - 0, - 0); -} - -static inline usbh_urbstatus_t usbhhubSetFeaturePort(usbh_port_t *port, uint8_t feature) { - return usbhhubControlRequest(port->device.host, - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER, - USBH_REQ_SET_FEATURE, - feature, - port->number, - 0, - 0); -} - -#endif - -#endif - -#endif /* USBH_HUB_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/msd.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/msd.h deleted file mode 100644 index d164618..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/dev/msd.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_MSD_H_ -#define USBH_MSD_H_ - -#include "hal_usbh.h" - -#if HAL_USE_USBH && HAL_USBH_USE_MSD - -/* TODO: - * - * - Implement of conditional compilation of multiple-luns per instance. - * - Implement error checking and recovery when commands fail. - * - */ - - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -#define _usbhmsd_driver_methods \ - _base_block_device_methods - -struct USBHMassStorageDriverVMT { - _usbhmsd_driver_methods -}; - -typedef struct USBHMassStorageLUNDriver USBHMassStorageLUNDriver; -typedef struct USBHMassStorageDriver USBHMassStorageDriver; - -struct USBHMassStorageLUNDriver { - /* inherited from abstract block driver */ - const struct USBHMassStorageDriverVMT *vmt; - _base_block_device_data - - BlockDeviceInfo info; - USBHMassStorageDriver *msdp; - - USBHMassStorageLUNDriver *next; -}; - -typedef struct USBHMassStorageDriver { - /* inherited from abstract class driver */ - _usbh_base_classdriver_data - - /* for LUN request serialization, can be removed - * if the driver is configured to support only one LUN - * per USBHMassStorageDriver instance */ - mutex_t mtx; - - usbh_ep_t epin; - usbh_ep_t epout; - uint8_t ifnum; - uint8_t max_lun; - uint32_t tag; - - USBHMassStorageLUNDriver *luns; -} USBHMassStorageDriver; - - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern USBHMassStorageLUNDriver MSBLKD[HAL_USBHMSD_MAX_LUNS]; -extern USBHMassStorageDriver USBHMSD[HAL_USBHMSD_MAX_INSTANCES]; - -#ifdef __cplusplus -extern "C" { -#endif - /* Mass Storage Driver */ - void usbhmsdObjectInit(USBHMassStorageDriver *msdp); - - /* Mass Storage LUN Driver (block driver) */ - void usbhmsdLUNObjectInit(USBHMassStorageLUNDriver *lunp); - void usbhmsdLUNStart(USBHMassStorageLUNDriver *lunp); - void usbhmsdLUNStop(USBHMassStorageLUNDriver *lunp); - bool usbhmsdLUNConnect(USBHMassStorageLUNDriver *lunp); - bool usbhmsdLUNDisconnect(USBHMassStorageLUNDriver *lunp); - bool usbhmsdLUNRead(USBHMassStorageLUNDriver *lunp, uint32_t startblk, - uint8_t *buffer, uint32_t n); - bool usbhmsdLUNWrite(USBHMassStorageLUNDriver *lunp, uint32_t startblk, - const uint8_t *buffer, uint32_t n); - bool usbhmsdLUNSync(USBHMassStorageLUNDriver *lunp); - bool usbhmsdLUNGetInfo(USBHMassStorageLUNDriver *lunp, BlockDeviceInfo *bdip); - bool usbhmsdLUNIsInserted(USBHMassStorageLUNDriver *lunp); - bool usbhmsdLUNIsProtected(USBHMassStorageLUNDriver *lunp); -#ifdef __cplusplus -} -#endif - -#endif - -#endif /* USBH_MSD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/internal.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/internal.h deleted file mode 100644 index baa477f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/internal.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_INTERNAL_H_ -#define USBH_INTERNAL_H_ - -#include "hal_usbh.h" - -#if HAL_USE_USBH - -/*===========================================================================*/ -/* These declarations are not part of the public API. */ -/*===========================================================================*/ - -#if HAL_USBH_USE_FTDI -extern const usbh_classdriverinfo_t usbhftdiClassDriverInfo; -#endif -#if HAL_USBH_USE_MSD -extern const usbh_classdriverinfo_t usbhmsdClassDriverInfo; -#endif -#if HAL_USBH_USE_UVC -extern const usbh_classdriverinfo_t usbhuvcClassDriverInfo; -#endif -#if HAL_USBH_USE_HUB -extern const usbh_classdriverinfo_t usbhhubClassDriverInfo; -void _usbhub_port_object_init(usbh_port_t *port, USBHDriver *usbh, - USBHHubDriver *hub, uint8_t number); -#else -void _usbhub_port_object_init(usbh_port_t *port, USBHDriver *usbh, uint8_t number); -#endif - -void _usbh_port_disconnected(usbh_port_t *port); -void _usbh_urb_completeI(usbh_urb_t *urb, usbh_urbstatus_t status); -bool _usbh_urb_abortI(usbh_urb_t *urb, usbh_urbstatus_t status); -void _usbh_urb_abort_and_waitS(usbh_urb_t *urb, usbh_urbstatus_t status); - - -#define USBH_CLASSIN(type, req, value, index) \ - (USBH_REQTYPE_IN | type | USBH_REQTYPE_CLASS), \ - req, \ - value, \ - index - -#define USBH_CLASSOUT(type, req, value, index) \ - (USBH_REQTYPE_OUT | type | USBH_REQTYPE_CLASS), \ - req, \ - value, \ - index - -#define USBH_STANDARDIN(type, req, value, index) \ - (USBH_REQTYPE_IN | type | USBH_REQTYPE_STANDARD), \ - req, \ - value, \ - index - -#define USBH_STANDARDOUT(type, req, value, index) \ - (USBH_REQTYPE_OUT | type | USBH_REQTYPE_STANDARD), \ - req, \ - value, \ - index - - -#define USBH_PID_DATA0 0 -#define USBH_PID_DATA2 1 -#define USBH_PID_DATA1 2 -#define USBH_PID_MDATA 3 -#define USBH_PID_SETUP 3 - - -/* GetBusState and SetHubDescriptor are optional, omitted */ -#define ClearHubFeature (((USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE) << 8) \ - | USBH_REQ_CLEAR_FEATURE) -#define SetHubFeature (((USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE) << 8) \ - | USBH_REQ_SET_FEATURE) -#define ClearPortFeature (((USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER) << 8) \ - | USBH_REQ_CLEAR_FEATURE) -#define SetPortFeature (((USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER) << 8) \ - | USBH_REQ_SET_FEATURE) -#define GetHubDescriptor (((USBH_REQTYPE_IN | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE) << 8) \ - | USBH_REQ_GET_DESCRIPTOR) -#define GetHubStatus (((USBH_REQTYPE_IN | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE) << 8) \ - | USBH_REQ_GET_STATUS) -#define GetPortStatus (((USBH_REQTYPE_IN | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER) << 8) \ - | USBH_REQ_GET_STATUS) - - -#define USBH_PORTSTATUS_CONNECTION 0x0001 -#define USBH_PORTSTATUS_ENABLE 0x0002 -#define USBH_PORTSTATUS_SUSPEND 0x0004 -#define USBH_PORTSTATUS_OVERCURRENT 0x0008 -#define USBH_PORTSTATUS_RESET 0x0010 -/* bits 5 to 7 are reserved */ -#define USBH_PORTSTATUS_POWER 0x0100 -#define USBH_PORTSTATUS_LOW_SPEED 0x0200 -#define USBH_PORTSTATUS_HIGH_SPEED 0x0400 -#define USBH_PORTSTATUS_TEST 0x0800 -#define USBH_PORTSTATUS_INDICATOR 0x1000 -/* bits 13 to 15 are reserved */ - -#define USBH_PORTSTATUS_C_CONNECTION 0x0001 -#define USBH_PORTSTATUS_C_ENABLE 0x0002 -#define USBH_PORTSTATUS_C_SUSPEND 0x0004 -#define USBH_PORTSTATUS_C_OVERCURRENT 0x0008 -#define USBH_PORTSTATUS_C_RESET 0x0010 - -#define USBH_HUBSTATUS_C_HUB_LOCAL_POWER 0x0001 -#define USBH_HUBSTATUS_C_HUB_OVER_CURRENT 0x0002 - -/* - * Port feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define USBH_HUB_FEAT_C_HUB_LOCAL_POWER 0 -#define USBH_HUB_FEAT_C_HUB_OVER_CURRENT 1 -#define USBH_PORT_FEAT_CONNECTION 0 -#define USBH_PORT_FEAT_ENABLE 1 -#define USBH_PORT_FEAT_SUSPEND 2 -#define USBH_PORT_FEAT_OVERCURRENT 3 -#define USBH_PORT_FEAT_RESET 4 -#define USBH_PORT_FEAT_POWER 8 -#define USBH_PORT_FEAT_LOWSPEED 9 -#define USBH_PORT_FEAT_C_CONNECTION 16 -#define USBH_PORT_FEAT_C_ENABLE 17 -#define USBH_PORT_FEAT_C_SUSPEND 18 -#define USBH_PORT_FEAT_C_OVERCURRENT 19 -#define USBH_PORT_FEAT_C_RESET 20 -#define USBH_PORT_FEAT_TEST 21 -#define USBH_PORT_FEAT_INDICATOR 22 - -#define sizeof_array(x) (sizeof(x)/sizeof(*(x))) - -#endif - -#endif /* USBH_INTERNAL_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/include/usbh/list.h b/ChibiOS_16.1.5/community/os/hal/include/usbh/list.h deleted file mode 100644 index 4eceacd..0000000 --- a/ChibiOS_16.1.5/community/os/hal/include/usbh/list.h +++ /dev/null @@ -1,598 +0,0 @@ -#ifndef USBH_LIST_H_ -#define USBH_LIST_H_ - -/* TODO: re-write this file; stolen from linux */ - -#ifndef offsetof -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) -#endif - -#define container_of(ptr, type, member) ((type *)(void *)((char *)(ptr) - offsetof(type, member))) -#ifndef container_of -#define container_of(ptr, type, member) ({ \ - const typeof(((type *)0)->member) * __mptr = (ptr); \ - (type *)((char *)__mptr - offsetof(type, member)); }) -#endif - -/* - * Simple doubly linked list implementation. - * - * Some of the internal functions ("__xxx") are useful when - * manipulating whole lists rather than single entries, as - * sometimes we already know the next/prev entries and we can - * generate better code by using them directly rather than - * using the generic single-entry routines. - */ -struct list_head { - struct list_head *next, *prev; -}; - -#define LIST_HEAD_INIT(name) { &(name), &(name) } - -#define LIST_HEAD(name) \ - struct list_head name = LIST_HEAD_INIT(name) - -static inline void INIT_LIST_HEAD(struct list_head *list) -{ - list->next = list; - list->prev = list; -} - -/* - * Insert a new entry between two known consecutive entries. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -#ifndef CONFIG_DEBUG_LIST -static inline void __list_add(struct list_head *new, - struct list_head *prev, - struct list_head *next) -{ - next->prev = new; - new->next = next; - new->prev = prev; - prev->next = new; -} -#else -extern void __list_add(struct list_head *new, - struct list_head *prev, - struct list_head *next); -#endif - -/** - * list_add - add a new entry - * @new: new entry to be added - * @head: list head to add it after - * - * Insert a new entry after the specified head. - * This is good for implementing stacks. - */ -static inline void list_add(struct list_head *new, struct list_head *head) -{ - __list_add(new, head, head->next); -} - - -/** - * list_add_tail - add a new entry - * @new: new entry to be added - * @head: list head to add it before - * - * Insert a new entry before the specified head. - * This is useful for implementing queues. - */ -static inline void list_add_tail(struct list_head *new, struct list_head *head) -{ - __list_add(new, head->prev, head); -} - -/* - * Delete a list entry by making the prev/next entries - * point to each other. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_del(struct list_head * prev, struct list_head * next) -{ - next->prev = prev; - prev->next = next; -} - -/** - * list_del - deletes entry from list. - * @entry: the element to delete from the list. - * Note: list_empty() on entry does not return true after this, the entry is - * in an undefined state. - */ -#ifndef CONFIG_DEBUG_LIST -static inline void __list_del_entry(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); -} - -static inline void list_del(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); - // entry->next = LIST_POISON1; - // entry->prev = LIST_POISON2; -} -#else -extern void __list_del_entry(struct list_head *entry); -extern void list_del(struct list_head *entry); -#endif - -/** - * list_replace - replace old entry by new one - * @old : the element to be replaced - * @new : the new element to insert - * - * If @old was empty, it will be overwritten. - */ -static inline void list_replace(struct list_head *old, - struct list_head *new) -{ - new->next = old->next; - new->next->prev = new; - new->prev = old->prev; - new->prev->next = new; -} - -static inline void list_replace_init(struct list_head *old, - struct list_head *new) -{ - list_replace(old, new); - INIT_LIST_HEAD(old); -} - -/** - * list_del_init - deletes entry from list and reinitialize it. - * @entry: the element to delete from the list. - */ -static inline void list_del_init(struct list_head *entry) -{ - __list_del_entry(entry); - INIT_LIST_HEAD(entry); -} - -/** - * list_move - delete from one list and add as another's head - * @list: the entry to move - * @head: the head that will precede our entry - */ -static inline void list_move(struct list_head *list, struct list_head *head) -{ - __list_del_entry(list); - list_add(list, head); -} - -/** - * list_move_tail - delete from one list and add as another's tail - * @list: the entry to move - * @head: the head that will follow our entry - */ -static inline void list_move_tail(struct list_head *list, - struct list_head *head) -{ - __list_del_entry(list); - list_add_tail(list, head); -} - -/** - * list_is_last - tests whether @list is the last entry in list @head - * @list: the entry to test - * @head: the head of the list - */ -static inline int list_is_last(const struct list_head *list, - const struct list_head *head) -{ - return list->next == head; -} - -/** - * list_empty - tests whether a list is empty - * @head: the list to test. - */ -static inline int list_empty(const struct list_head *head) -{ - return head->next == head; -} - -/** - * list_empty_careful - tests whether a list is empty and not being modified - * @head: the list to test - * - * Description: - * tests whether a list is empty _and_ checks that no other CPU might be - * in the process of modifying either member (next or prev) - * - * NOTE: using list_empty_careful() without synchronization - * can only be safe if the only activity that can happen - * to the list entry is list_del_init(). Eg. it cannot be used - * if another CPU could re-list_add() it. - */ -static inline int list_empty_careful(const struct list_head *head) -{ - struct list_head *next = head->next; - return (next == head) && (next == head->prev); -} - -/** - * list_rotate_left - rotate the list to the left - * @head: the head of the list - */ -static inline void list_rotate_left(struct list_head *head) -{ - struct list_head *first; - - if (!list_empty(head)) { - first = head->next; - list_move_tail(first, head); - } -} - -/** - * list_is_singular - tests whether a list has just one entry. - * @head: the list to test. - */ -static inline int list_is_singular(const struct list_head *head) -{ - return !list_empty(head) && (head->next == head->prev); -} - -static inline void __list_cut_position(struct list_head *list, - struct list_head *head, struct list_head *entry) -{ - struct list_head *new_first = entry->next; - list->next = head->next; - list->next->prev = list; - list->prev = entry; - entry->next = list; - head->next = new_first; - new_first->prev = head; -} - -/** - * list_cut_position - cut a list into two - * @list: a new list to add all removed entries - * @head: a list with entries - * @entry: an entry within head, could be the head itself - * and if so we won't cut the list - * - * This helper moves the initial part of @head, up to and - * including @entry, from @head to @list. You should - * pass on @entry an element you know is on @head. @list - * should be an empty list or a list you do not care about - * losing its data. - * - */ -static inline void list_cut_position(struct list_head *list, - struct list_head *head, struct list_head *entry) -{ - if (list_empty(head)) - return; - if (list_is_singular(head) && - (head->next != entry && head != entry)) - return; - if (entry == head) - INIT_LIST_HEAD(list); - else - __list_cut_position(list, head, entry); -} - -static inline void __list_splice(const struct list_head *list, - struct list_head *prev, - struct list_head *next) -{ - struct list_head *first = list->next; - struct list_head *last = list->prev; - - first->prev = prev; - prev->next = first; - - last->next = next; - next->prev = last; -} - -/** - * list_splice - join two lists, this is designed for stacks - * @list: the new list to add. - * @head: the place to add it in the first list. - */ -static inline void list_splice(const struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) - __list_splice(list, head, head->next); -} - -/** - * list_splice_tail - join two lists, each list being a queue - * @list: the new list to add. - * @head: the place to add it in the first list. - */ -static inline void list_splice_tail(struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) - __list_splice(list, head->prev, head); -} - -/** - * list_splice_init - join two lists and reinitialise the emptied list. - * @list: the new list to add. - * @head: the place to add it in the first list. - * - * The list at @list is reinitialised - */ -static inline void list_splice_init(struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) { - __list_splice(list, head, head->next); - INIT_LIST_HEAD(list); - } -} - -/** - * list_splice_tail_init - join two lists and reinitialise the emptied list - * @list: the new list to add. - * @head: the place to add it in the first list. - * - * Each of the lists is a queue. - * The list at @list is reinitialised - */ -static inline void list_splice_tail_init(struct list_head *list, - struct list_head *head) -{ - if (!list_empty(list)) { - __list_splice(list, head->prev, head); - INIT_LIST_HEAD(list); - } -} - -/** - * list_entry - get the struct for this entry - * @ptr: the &struct list_head pointer. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_head within the struct. - */ -#define list_entry(ptr, type, member) \ - container_of(ptr, type, member) - -/** - * list_first_entry - get the first element from a list - * @ptr: the list head to take the element from. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_head within the struct. - * - * Note, that list is expected to be not empty. - */ -#define list_first_entry(ptr, type, member) \ - list_entry((ptr)->next, type, member) - -/** - * list_last_entry - get the last element from a list - * @ptr: the list head to take the element from. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_head within the struct. - * - * Note, that list is expected to be not empty. - */ -#define list_last_entry(ptr, type, member) \ - list_entry((ptr)->prev, type, member) - -/** - * list_first_entry_or_null - get the first element from a list - * @ptr: the list head to take the element from. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_head within the struct. - * - * Note that if the list is empty, it returns NULL. - */ -#define list_first_entry_or_null(ptr, type, member) \ - (!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL) - -/** - * list_next_entry - get the next element in list - * @pos: the type * to cursor - * @member: the name of the list_head within the struct. - */ -#define list_next_entry(pos, type, member) \ - list_entry((pos)->member.next, type, member) - -/** - * list_prev_entry - get the prev element in list - * @pos: the type * to cursor - * @member: the name of the list_head within the struct. - */ -#define list_prev_entry(pos, type, member) \ - list_entry((pos)->member.prev, type, member) - -/** - * list_for_each - iterate over a list - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - */ -#define list_for_each(pos, head) \ - for (pos = (head)->next; pos != (head); pos = pos->next) - -/** - * list_for_each_prev - iterate over a list backwards - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - */ -#define list_for_each_prev(pos, head) \ - for (pos = (head)->prev; pos != (head); pos = pos->prev) - -/** - * list_for_each_safe - iterate over a list safe against removal of list entry - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - */ -#define list_for_each_safe(pos, n, head) \ - for (pos = (head)->next, n = pos->next; pos != (head); \ - pos = n, n = pos->next) - -/** - * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - */ -#define list_for_each_prev_safe(pos, n, head) \ - for (pos = (head)->prev, n = pos->prev; \ - pos != (head); \ - pos = n, n = pos->prev) - -/** - * list_for_each_entry - iterate over list of given type - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - */ -#define list_for_each_entry(pos, type, head, member) \ - for (pos = list_first_entry(head, type, member); \ - &pos->member != (head); \ - pos = list_next_entry(pos, type, member)) - -/** - * list_for_each_entry_reverse - iterate backwards over list of given type. - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - */ -#define list_for_each_entry_reverse(pos, type, head, member) \ - for (pos = list_last_entry(head, type, member); \ - &pos->member != (head); \ - pos = list_prev_entry(pos, type, member)) - -/** - * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue() - * @pos: the type * to use as a start point - * @head: the head of the list - * @member: the name of the list_head within the struct. - * - * Prepares a pos entry for use as a start point in list_for_each_entry_continue(). - */ -#define list_prepare_entry(pos, type, head, member) \ - ((pos) ? : list_entry(head, type, member)) - -/** - * list_for_each_entry_continue - continue iteration over list of given type - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Continue to iterate over list of given type, continuing after - * the current position. - */ -#define list_for_each_entry_continue(pos, type, head, member) \ - for (pos = list_next_entry(pos, type, member); \ - &pos->member != (head); \ - pos = list_next_entry(pos, type, member)) - -/** - * list_for_each_entry_continue_reverse - iterate backwards from the given point - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Start to iterate over list of given type backwards, continuing after - * the current position. - */ -#define list_for_each_entry_continue_reverse(pos, type, head, member) \ - for (pos = list_prev_entry(pos, type, member); \ - &pos->member != (head); \ - pos = list_prev_entry(pos, type, member)) - -/** - * list_for_each_entry_from - iterate over list of given type from the current point - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate over list of given type, continuing from current position. - */ -#define list_for_each_entry_from(pos, type, head, member) \ - for (; &pos->member != (head); \ - pos = list_next_entry(pos, type, member)) - -/** - * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - */ -#define list_for_each_entry_safe(pos, type, n, head, member) \ - for (pos = list_first_entry(head, type, member), \ - n = list_next_entry(pos, type, member); \ - &pos->member != (head); \ - pos = n, n = list_next_entry(n, type, member)) - -/** - * list_for_each_entry_safe_continue - continue list iteration safe against removal - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate over list of given type, continuing after current point, - * safe against removal of list entry. - */ -#define list_for_each_entry_safe_continue(pos, type, n, head, member) \ - for (pos = list_next_entry(pos, type, member), \ - n = list_next_entry(pos, type, member); \ - &pos->member != (head); \ - pos = n, n = list_next_entry(n, type, member)) - -/** - * list_for_each_entry_safe_from - iterate over list from current point safe against removal - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate over list of given type from current point, safe against - * removal of list entry. - */ -#define list_for_each_entry_safe_from(pos, type, n, head, member) \ - for (n = list_next_entry(pos, type, member); \ - &pos->member != (head); \ - pos = n, n = list_next_entry(n, type, member)) - -/** - * list_for_each_entry_safe_reverse - iterate backwards over list safe against removal - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_head within the struct. - * - * Iterate backwards over list of given type, safe against removal - * of list entry. - */ -#define list_for_each_entry_safe_reverse(pos, type, n, head, member) \ - for (pos = list_last_entry(head, type, member), \ - n = list_prev_entry(pos, type, member); \ - &pos->member != (head); \ - pos = n, n = list_prev_entry(n, type, member)) - -/** - * list_safe_reset_next - reset a stale list_for_each_entry_safe loop - * @pos: the loop cursor used in the list_for_each_entry_safe loop - * @n: temporary storage used in list_for_each_entry_safe - * @member: the name of the list_head within the struct. - * - * list_safe_reset_next is not safe to use in general if the list may be - * modified concurrently (eg. the lock is dropped in the loop body). An - * exception to this is if the cursor element (pos) is pinned in the list, - * and list_safe_reset_next is called after re-taking the lock and before - * completing the current iteration of the loop body. - */ -#define list_safe_reset_next(pos, type, n, member) \ - n = list_next_entry(pos, type, member) - -#endif /* USBH_LIST_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.c deleted file mode 100644 index e6eeed8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/hal_lld.c - * @brief HAL Driver subsystem low level driver source template. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -#ifdef __CC_ARM -__attribute__ ((section(".ARM.__at_0x400"))) -#else -__attribute__ ((used,section(".cfmconfig"))) -#endif -const uint8_t _cfm[0x10] = { - 0xFF, /* NV_BACKKEY3: KEY=0xFF */ - 0xFF, /* NV_BACKKEY2: KEY=0xFF */ - 0xFF, /* NV_BACKKEY1: KEY=0xFF */ - 0xFF, /* NV_BACKKEY0: KEY=0xFF */ - 0xFF, /* NV_BACKKEY7: KEY=0xFF */ - 0xFF, /* NV_BACKKEY6: KEY=0xFF */ - 0xFF, /* NV_BACKKEY5: KEY=0xFF */ - 0xFF, /* NV_BACKKEY4: KEY=0xFF */ - 0xFF, /* NV_FPROT3: PROT=0xFF */ - 0xFF, /* NV_FPROT2: PROT=0xFF */ - 0xFF, /* NV_FPROT1: PROT=0xFF */ - 0xFF, /* NV_FPROT0: PROT=0xFF */ - 0x7E, /* NV_FSEC: KEYEN=1,MEEN=3,FSLACC=3,SEC=2 */ - 0xFF, /* NV_FOPT: ??=1,??=1,FAST_INIT=1,LPBOOT1=1,RESET_PIN_CFG=1, - NMI_DIS=1,EZPORT_DIS=1,LPBOOT0=1 */ - 0xFF, - 0xFF -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * @todo Use a macro to define the system clock frequency. - * - * @notapi - */ -void hal_lld_init(void) { - -} - -/** - * @brief K20x clock initialization. - * @note All the involved constants come from the file @p board.h. - * @note This function is meant to be invoked early during the system - * initialization, it is usually invoked from the file - * @p board.c. - * @todo This function needs to be more generic. - * - * @special - */ -void k20x_clock_init(void) { -#if !KINETIS_NO_INIT - - /* Disable the watchdog */ - WDOG->UNLOCK = 0xC520; - WDOG->UNLOCK = 0xD928; - WDOG->STCTRLH &= ~WDOG_STCTRLH_WDOGEN; - - SIM->SCGC5 |= SIM_SCGC5_PORTA | - SIM_SCGC5_PORTB | - SIM_SCGC5_PORTC | - SIM_SCGC5_PORTD | - SIM_SCGC5_PORTE; - -#if KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEI - /* This is the default mode at reset. */ - - /* Configure FEI mode */ - MCG->C4 = MCG_C4_DRST_DRS(KINETIS_MCG_FLL_DRS) | - (KINETIS_MCG_FLL_DMX32 ? MCG_C4_DMX32 : 0); - - /* Set clock dividers */ - SIM->CLKDIV1 = SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1-1) | - SIM_CLKDIV1_OUTDIV2(KINETIS_CLKDIV1_OUTDIV2-1) | - SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4-1); - SIM->CLKDIV2 = SIM_CLKDIV2_USBDIV(0); /* not strictly necessary since usb_lld will set this */ - -#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE - - uint32_t ratio, frdiv; - uint32_t ratios[] = { 32, 64, 128, 256, 512, 1024, 1280, 1536 }; - uint8_t ratio_quantity = sizeof(ratios) / sizeof(ratios[0]); - uint8_t i; - - /* EXTAL0 and XTAL0 */ - PORTA->PCR[18] = 0; - PORTA->PCR[19] = 0; - - /* - * Start in FEI mode - */ - - /* Internal capacitors for crystal */ -#if defined(KINETIS_BOARD_OSCILLATOR_SETTING) - OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING; -#else /* KINETIS_BOARD_OSCILLATOR_SETTING */ - /* Disable the internal capacitors */ - OSC0->CR = 0; -#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */ - - /* TODO: need to add more flexible calculation, specially regarding - * divisors which may not be available depending on the XTAL - * frequency, which would required other registers to be modified. - */ - /* Enable OSC, low power mode */ - MCG->C2 = MCG_C2_LOCRE0 | MCG_C2_EREFS0; - if (KINETIS_XTAL_FREQUENCY > 8000000UL) - MCG->C2 |= MCG_C2_RANGE0(2); - else - MCG->C2 |= MCG_C2_RANGE0(1); - - frdiv = 7; - ratio = KINETIS_XTAL_FREQUENCY / 31250UL; - for (i = 0; i < ratio_quantity; ++i) { - if (ratio == ratios[i]) { - frdiv = i; - break; - } - } - - /* Switch to crystal as clock source, FLL input of 31.25 KHz */ - MCG->C1 = MCG_C1_CLKS(2) | MCG_C1_FRDIV(frdiv); - - /* Wait for crystal oscillator to begin */ - while (!(MCG->S & MCG_S_OSCINIT0)); - - /* Wait for the FLL to use the oscillator */ - while (MCG->S & MCG_S_IREFST); - - /* Wait for the MCGOUTCLK to use the oscillator */ - while ((MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST(2)); - - /* - * Now in FBE mode - */ - #define KINETIS_PLLIN_FREQUENCY 2000000UL - /* - * Config PLL input for 2 MHz - * TODO: Make sure KINETIS_XTAL_FREQUENCY >= 2Mhz && <= 50Mhz - */ - MCG->C5 = MCG_C5_PRDIV0((KINETIS_XTAL_FREQUENCY/KINETIS_PLLIN_FREQUENCY) - 1); - - /* - * Config PLL output to match KINETIS_SYSCLK_FREQUENCY - * TODO: make sure KINETIS_SYSCLK_FREQUENCY is a match - */ - for(i = 24; i < 56; i++) - { - if(i == (KINETIS_PLLCLK_FREQUENCY/KINETIS_PLLIN_FREQUENCY)) - { - /* Config PLL to match KINETIS_PLLCLK_FREQUENCY */ - MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(i-24); - break; - } - } - - if(i>=56) /* Config PLL for 96 MHz output as default setting */ - MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(0); - - /* Wait for PLL to start using crystal as its input, and to lock */ - while ((MCG->S & (MCG_S_PLLST|MCG_S_LOCK0))!=(MCG_S_PLLST|MCG_S_LOCK0)); - - /* - * Now in PBE mode - */ - /* Set the PLL dividers for the different clocks */ - SIM->CLKDIV1 = SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1-1) | - SIM_CLKDIV1_OUTDIV2(KINETIS_CLKDIV1_OUTDIV2-1) | - SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4-1); - SIM->CLKDIV2 = SIM_CLKDIV2_USBDIV(0); - SIM->SOPT2 = SIM_SOPT2_PLLFLLSEL; - - /* Switch to PLL as clock source */ - MCG->C1 = MCG_C1_CLKS(0); - - /* Wait for PLL clock to be used */ - while ((MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_PLL); - - /* - * Now in PEE mode - */ -#else /* KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE */ -#error Unimplemented KINETIS_MCG_MODE -#endif /* KINETIS_MCG_MODE == ... */ - -#endif /* !KINETIS_NO_INIT */ -} - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.h deleted file mode 100644 index b7f6b46..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_lld.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file K20x/hal_lld.h - * @brief Kinetis K20x HAL subsystem low level driver header. - * - * @addtogroup HAL - * @{ - */ - -#ifndef HAL_LLD_H_ -#define HAL_LLD_H_ - -#include "kinetis_registry.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Defines the support for realtime counters in the HAL. - */ -#define HAL_IMPLEMENTS_COUNTERS FALSE - -/** - * @name Platform identification - * @{ - */ -#define PLATFORM_NAME "Kinetis" -/** @} */ - -/** - * @name Internal clock sources - * @{ - */ -#define KINETIS_IRCLK_F 4000000 /**< Fast internal reference clock, factory trimmed. */ -#define KINETIS_IRCLK_S 32768 /**< Slow internal reference clock, factory trimmed. */ -/** @} */ - -#define KINETIS_MCG_MODE_FEI 1 /**< FLL Engaged Internal. */ -#define KINETIS_MCG_MODE_FEE 2 /**< FLL Engaged External. */ -#define KINETIS_MCG_MODE_FBI 3 /**< FLL Bypassed Internal. */ -#define KINETIS_MCG_MODE_FBE 4 /**< FLL Bypassed External. */ -#define KINETIS_MCG_MODE_PEE 5 /**< PLL Engaged External. */ -#define KINETIS_MCG_MODE_PBE 6 /**< PLL Bypassed External. */ -#define KINETIS_MCG_MODE_BLPI 7 /**< Bypassed Low Power Internal. */ -#define KINETIS_MCG_MODE_BLPE 8 /**< Bypassed Low Power External. */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief Disables the MCG/system clock initialization in the HAL. - */ -#if !defined(KINETIS_NO_INIT) || defined(__DOXYGEN__) -#define KINETIS_NO_INIT FALSE -#endif - -/** - * @brief MCG mode selection. - */ -#if !defined(KINETIS_MCG_MODE) || defined(__DOXYGEN__) -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#endif - -/** - * @brief MCU PLL clock frequency. - */ -#if !defined(KINETIS_PLLCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#endif - -/** - * @brief Clock divider for core/system clocks (OUTDIV1). - * @note The allowed range is 1..16 - * @note The default value is calculated for a 48 MHz system clock - * from a 96 MHz PLL output. - */ -#if !defined(KINETIS_CLKDIV1_OUTDIV1) || defined(__DOXYGEN__) - #if defined(KINETIS_SYSCLK_FREQUENCY) && KINETIS_SYSCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV1 (KINETIS_PLLCLK_FREQUENCY/KINETIS_SYSCLK_FREQUENCY) - #else - #define KINETIS_CLKDIV1_OUTDIV1 2 - #endif -#endif - -/** - * @brief Clock divider for bus clock (OUTDIV2). - * @note The allowed range is 1..16 - * @note The default value is calculated for a 48 MHz bus clock - * from a 96 MHz PLL output. - */ -#if !defined(KINETIS_CLKDIV1_OUTDIV2) || defined(__DOXYGEN__) - #if defined(KINETIS_BUSCLK_FREQUENCY) && KINETIS_BUSCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV2 (KINETIS_PLLCLK_FREQUENCY/KINETIS_BUSCLK_FREQUENCY) - #elif defined(KINETIS_SYSCLK_FREQUENCY) && KINETIS_SYSCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV2 KINETIS_CLKDIV1_OUTDIV1 - #else - #define KINETIS_CLKDIV1_OUTDIV2 2 - #endif -#endif - -/** - * @brief Clock divider for flash clock (OUTDIV4). - * @note The allowed range is 1..16 - * @note The default value is calculated for a 24 MHz flash clock - * from a 96 MHz PLL output - */ -#if !defined(KINETIS_CLKDIV1_OUTDIV4) || defined(__DOXYGEN__) - #if defined(KINETIS_FLASHCLK_FREQUENCY) && KINETIS_FLASHCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV4 (KINETIS_PLLCLK_FREQUENCY/KINETIS_FLASHCLK_FREQUENCY) - #elif defined(KINETIS_SYSCLK_FREQUENCY) && KINETIS_SYSCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV4 (KINETIS_CLKDIV1_OUTDIV1*2) - #else - #define KINETIS_CLKDIV1_OUTDIV4 4 - #endif -#endif - -/** - * @brief FLL DCO tuning enable for 32.768 kHz reference. - * @note Set to 1 for fine-tuning DCO for maximum frequency with - * a 32.768 kHz reference. - * @note The default value is for a 32.768 kHz external crystal. - */ -#if !defined(KINETIS_MCG_FLL_DMX32) || defined(__DOXYGEN__) -#define KINETIS_MCG_FLL_DMX32 1 -#endif - -/** - * @brief FLL DCO range selection. - * @note The allowed range is 0...3. - * @note The default value is calculated for 48 MHz FLL output - * from a 32.768 kHz external crystal. - * (DMX32 && DRST_DRS=1 => F=1464; 32.768 kHz * F ~= 48 MHz.) - * - */ -#if !defined(KINETIS_MCG_FLL_DRS) || defined(__DOXYGEN__) -#define KINETIS_MCG_FLL_DRS 2 -#endif - -/** - * @brief MCU system/core clock frequency. - */ -#if !defined(KINETIS_SYSCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_SYSCLK_FREQUENCY (KINETIS_PLLCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV1) -#endif - -/** - * @brief MCU bus clock frequency. - */ -#if !defined(KINETIS_BUSCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_PLLCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV2) -#endif - -/** - * @brief MCU flash clock frequency. - */ -#if !defined(KINETIS_FLASHCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_FLASHCLK_FREQUENCY (KINETIS_PLLCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !defined(KINETIS_SYSCLK_FREQUENCY) - #error KINETIS_SYSCLK_FREQUENCY must be defined -#endif - -#if KINETIS_SYSCLK_FREQUENCY <= 0 || KINETIS_SYSCLK_FREQUENCY > KINETIS_SYSCLK_MAX - #error KINETIS_SYSCLK_FREQUENCY out of range -#endif - -#if !defined(KINETIS_BUSCLK_FREQUENCY) - #error KINETIS_BUSCLK_FREQUENCY must be defined -#endif - -#if KINETIS_BUSCLK_FREQUENCY <= 0 || KINETIS_BUSCLK_FREQUENCY > KINETIS_BUSCLK_MAX - #error KINETIS_BUSCLK_FREQUENCY out of range -#endif - -#if KINETIS_BUSCLK_FREQUENCY > KINETIS_SYSCLK_FREQUENCY - #error KINETIS_BUSCLK_FREQUENCY must be an integer divide of\ - KINETIS_SYSCLK_FREQUENCY -#endif - -#if !defined(KINETIS_FLASHCLK_FREQUENCY) - #error KINETIS_FLASHCLK_FREQUENCY must be defined -#endif - -#if KINETIS_FLASHCLK_FREQUENCY <= 0 || KINETIS_FLASHCLK_FREQUENCY > KINETIS_FLASHCLK_MAX - #error KINETIS_FLASHCLK_FREQUENCY out of range -#endif - -#if KINETIS_FLASHCLK_FREQUENCY > KINETIS_SYSCLK_FREQUENCY - #error KINETIS_FLASHCLK_FREQUENCY must be an integer divide of\ - KINETIS_SYSCLK_FREQUENCY -#endif - -#if !(defined(KINETIS_CLKDIV1_OUTDIV1) && \ - KINETIS_CLKDIV1_OUTDIV1 >= 1 && KINETIS_CLKDIV1_OUTDIV1 <= 16) - #error KINETIS_CLKDIV1_OUTDIV1 must be 1 through 16 -#endif - -#if !(defined(KINETIS_CLKDIV1_OUTDIV2) && \ - KINETIS_CLKDIV1_OUTDIV2 >= 1 && KINETIS_CLKDIV1_OUTDIV2 <= 16) -#error KINETIS_CLKDIV1_OUTDIV2 must be 1 through 16 -#endif - -#if !(defined(KINETIS_CLKDIV1_OUTDIV4) && \ - KINETIS_CLKDIV1_OUTDIV4 >= 1 && KINETIS_CLKDIV1_OUTDIV4 <= 16) -#error KINETIS_CLKDIV1_OUTDIV4 must be 1 through 16 -#endif - -#if !(KINETIS_MCG_FLL_DMX32 == 0 || KINETIS_MCG_FLL_DMX32 == 1) -#error Invalid KINETIS_MCG_FLL_DMX32 value, must be 0 or 1 -#endif - -#if !(0 <= KINETIS_MCG_FLL_DRS && KINETIS_MCG_FLL_DRS <= 3) -#error Invalid KINETIS_MCG_FLL_DRS value, must be 0...3 -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type representing a system clock frequency. - */ -typedef uint32_t halclock_t; - -/** - * @brief Type of the realtime free counter value. - */ -typedef uint32_t halrtcnt_t; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Returns the current value of the system free running counter. - * @note This service is implemented by returning the content of the - * DWT_CYCCNT register. - * - * @return The value of the system free running counter of - * type halrtcnt_t. - * - * @notapi - */ -#define hal_lld_get_counter_value() 0 - -/** - * @brief Realtime counter frequency. - * @note The DWT_CYCCNT register is incremented directly by the system - * clock so this function returns STM32_HCLK. - * - * @return The realtime counter frequency of type halclock_t. - * - * @notapi - */ -#define hal_lld_get_counter_frequency() 0 - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#include "nvic.h" - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); - void k20x_clock_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.c deleted file mode 100644 index f5a8d96..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.c +++ /dev/null @@ -1,390 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Adam J. Porter - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file K20x/pwm_lld.c - * @brief KINETIS PWM subsystem low level driver source. - * - * @addtogroup PWM - * @{ - */ - -#include "hal.h" - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief PWMD1 driver identifier. - * @note The driver PWMD1 allocates the timer FTM0 when enabled. - */ -#if KINETIS_PWM_USE_FTM0 || defined(__DOXYGEN__) -PWMDriver PWMD1; -#endif - -/** - * @brief PWMD2 driver identifier. - * @note The driver PWMD2 allocates the timer FTM1 when enabled. - */ -#if KINETIS_PWM_USE_FTM1 || defined(__DOXYGEN__) -PWMDriver PWMD2; -#endif - -/** - * @brief PWMD3 driver identifier. - * @note The driver PWMD3 allocates the timer FTM2 when enabled. - */ -#if KINETIS_PWM_USE_FTM2 || defined(__DOXYGEN__) -PWMDriver PWMD3; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void pwm_lld_serve_interrupt(PWMDriver *pwmp) { - uint32_t sr; - - sr = pwmp->ftm->SC; - pwmp->ftm->SC = sr&(~FTM_SC_TOF); - - if (((sr & FTM_SC_TOF) != 0) && /* Timer Overflow */ - ((sr & FTM_SC_TOIE) != 0) && - (pwmp->config->callback != NULL)) { - pwmp->config->callback(pwmp); - } - - uint8_t n=0; - for(n=0;nchannels;n++) { - sr = pwmp->ftm->CHANNEL[n].CnSC; - pwmp->ftm->CHANNEL[n].CnSC = sr&(~FTM_CnSC_CHF); - if (((sr & FTM_CnSC_CHF) != 0) && - ((sr & FTM_CnSC_CHIE) != 0) && - (pwmp->config->channels[n].callback != NULL)) { - pwmp->config->channels[n].callback(pwmp); - } - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if KINETIS_PWM_USE_FTM0 -/** - * @brief FTM0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_FTM0_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD1); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_PWM_USE_FTM0 */ - -#if KINETIS_PWM_USE_FTM1 -/** - * @brief FTM1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_FTM1_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD2); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_PWM_USE_FTM1 */ - -#if KINETIS_PWM_USE_FTM2 -/** - * @brief FTM2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_FTM2_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD3); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_PWM_USE_FTM2 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level PWM driver initialization. - * - * @notapi - */ -void pwm_lld_init(void) { - -#if KINETIS_PWM_USE_FTM0 - pwmObjectInit(&PWMD1); - PWMD1.channels = KINETIS_FTM0_CHANNELS; - PWMD1.ftm = FTM0; -#endif - -#if KINETIS_PWM_USE_FTM1 - pwmObjectInit(&PWMD2); - PWMD2.channels = KINETIS_FTM1_CHANNELS; - PWMD2.ftm = FTM1; -#endif - -#if KINETIS_PWM_USE_FTM2 - pwmObjectInit(&PWMD3); - PWMD3.channels = KINETIS_FTM2_CHANNELS; - PWMD3.ftm = FTM2; -#endif -} - -/** - * @brief Configures and activates the PWM peripheral. - * @note Starting a driver that is already in the @p PWM_READY state - * disables all the active channels. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_start(PWMDriver *pwmp) { - uint16_t psc; - uint8_t i=0; - - if (pwmp->state == PWM_STOP) { - /* Clock activation and timer reset.*/ -#if KINETIS_PWM_USE_FTM0 - if (&PWMD1 == pwmp) { - SIM->SCGC6 |= SIM_SCGC6_FTM0; - nvicEnableVector(FTM0_IRQn, KINETIS_PWM_FTM0_PRIORITY); - } -#endif - -#if KINETIS_PWM_USE_FTM1 - if (&PWMD2 == pwmp) { - SIM->SCGC6 |= SIM_SCGC6_FTM1; - nvicEnableVector(FTM1_IRQn, KINETIS_PWM_FTM1_PRIORITY); - } -#endif - -#if KINETIS_PWM_USE_FTM2 - if (&PWMD3 == pwmp) { - SIM->SCGC3 |= SIM_SCGC3_FTM2; - nvicEnableVector(FTM2_IRQn, KINETIS_PWM_FTM2_PRIORITY); - } -#endif - } - pwmp->ftm->MODE = FTM_MODE_FTMEN_MASK|FTM_MODE_PWMSYNC_MASK; - pwmp->ftm->SYNC = FTM_SYNC_CNTMIN_MASK|FTM_SYNC_CNTMAX_MASK - |FTM_SYNC_SWSYNC_MASK; - pwmp->ftm->COMBINE = FTM_COMBINE_SYNCEN3_MASK | FTM_COMBINE_SYNCEN2_MASK - | FTM_COMBINE_SYNCEN1_MASK | FTM_COMBINE_SYNCEN0_MASK; - pwmp->ftm->SYNCONF = FTM_SYNCONF_SYNCMODE_MASK; - - pwmp->ftm->CNTIN = 0x0000; - //~ pwmp->ftm->SC = 0; /* Disable FTM counter.*/ - pwmp->ftm->CNT = 0x0000; /* Clear count register.*/ - - /* Prescaler value calculation.*/ - psc = (KINETIS_SYSCLK_FREQUENCY / pwmp->config->frequency); - //~ /* Prescaler must be power of two between 1 and 128.*/ - osalDbgAssert(psc <= 128 && !(psc & (psc - 1)), "invalid frequency"); - //~ /* Prescaler register value determination. - //~ Prescaler register value conveniently corresponds to bit position, - //~ i.e., register value for prescaler CLK/64 is 6 ((1 << 6) == 64).*/ - for (i = 0; i < 8; i++) { - if (psc == (unsigned)(1 << i)) { - break; - } - } - - /* Set prescaler and clock mode. - This also sets the following: - CPWMS up-counting mode - Timer overflow interrupt disabled - DMA disabled.*/ - pwmp->ftm->SC = FTM_SC_CLKS(1) | FTM_SC_PS(i); - /* Configure period */ - pwmp->ftm->MOD = pwmp->period-1; - pwmp->ftm->PWMLOAD = FTM_PWMLOAD_LDOK_MASK; -} - -/** - * @brief Deactivates the PWM peripheral. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_stop(PWMDriver *pwmp) { - - /* If in ready state then disables the PWM clock.*/ - if (pwmp->state == PWM_READY) { -#if KINETIS_PWM_USE_FTM0 - if (&PWMD1 == pwmp) { - SIM->SCGC6 &= ~SIM_SCGC6_FTM0; - nvicDisableVector(FTM0_IRQn); - } -#endif - -#if KINETIS_PWM_USE_FTM1 - if (&PWMD2 == pwmp) { - SIM->SCGC6 &= ~SIM_SCGC6_FTM1; - nvicDisableVector(FTM1_IRQn); - } -#endif - -#if KINETIS_PWM_USE_FTM2 - if (&PWMD3 == pwmp) { - SIM->SCGC3 &= ~SIM_SCGC3_FTM2; - nvicDisableVector(FTM2_IRQn); - } -#endif - /* Disable FTM counter.*/ - pwmp->ftm->SC = 0; - pwmp->ftm->MOD = 0; - } -} - -/** - * @brief Enables a PWM channel. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is active using the specified configuration. - * @note The function has effect at the next cycle start. - * @note Channel notification is not enabled. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * @param[in] width PWM pulse width as clock pulses number - * - * @notapi - */ -void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width) { - uint32_t mode = FTM_CnSC_MSB; /* Edge-aligned PWM mode.*/ - - switch (pwmp->config->channels[channel].mode & PWM_OUTPUT_MASK) { - case PWM_OUTPUT_ACTIVE_HIGH: - mode |= FTM_CnSC_ELSB; - break; - case PWM_OUTPUT_ACTIVE_LOW: - mode |= FTM_CnSC_ELSA; - break; - } - - if (pwmp->ftm->CHANNEL[channel].CnSC & FTM_CnSC_CHIE) - mode |= FTM_CnSC_CHIE; - - pwmp->ftm->CHANNEL[channel].CnSC = mode; - pwmp->ftm->CHANNEL[channel].CnV = width; - pwmp->ftm->PWMLOAD = FTM_PWMLOAD_LDOK_MASK; -} - -/** - * @brief Disables a PWM channel and its notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is disabled and its output line returned to the - * idle state. - * @note The function has effect at the next cycle start. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) { - - pwmp->ftm->CHANNEL[channel].CnSC = 0; - pwmp->ftm->CHANNEL[channel].CnV = 0; -} - -/** - * @brief Enables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) { - pwmp->ftm->SC |= FTM_SC_TOIE; -} - -/** - * @brief Disables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) { - pwmp->ftm->SC &= ~FTM_SC_TOIE; -} - -/** - * @brief Enables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) { - pwmp->ftm->CHANNEL[channel].CnSC |= FTM_CnSC_CHIE; -} - -/** - * @brief Disables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) { - pwmp->ftm->CHANNEL[channel].CnSC &= ~FTM_CnSC_CHIE; -} - -#endif /* HAL_USE_PWM */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.h deleted file mode 100644 index ccc100f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_pwm_lld.h +++ /dev/null @@ -1,270 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Adam J. Porter - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file K20x7/pwm_lld.h - * @brief KINETIS PWM subsystem low level driver header. - * - * @addtogroup PWM - * @{ - */ - -#ifndef HAL_PWM_LLD_H_ -#define HAL_PWM_LLD_H_ - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Number of PWM channels per PWM driver. - */ -#define PWM_CHANNELS 8 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -#if !defined(KINETIS_PWM_USE_FTM0) - #define KINETIS_PWM_USE_FTM0 FALSE -#endif - -#if !defined(KINETIS_PWM_USE_FTM1) - #define KINETIS_PWM_USE_FTM1 FALSE -#endif - -#if !defined(KINETIS_PWM_USE_FTM2) - #define KINETIS_PWM_USE_FTM2 FALSE -#endif - -/** - * @brief FTM0 interrupt priority level setting. - */ -#if !defined(KINETIS_PWM_FTM0_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_PWM_FTM0_PRIORITY 12 -#endif - -/** - * @brief FTM1 interrupt priority level setting. - */ -#if !defined(KINETIS_PWM_FTM1_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_PWM_FTM1_PRIORITY 12 -#endif - -/** - * @brief FTM2 interrupt priority level setting. - */ -#if !defined(KINETIS_PWM_FTM2_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_PWM_FTM2_PRIORITY 12 -#endif - -/** @} */ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief If advanced timer features switch. - * @details If set to @p TRUE the advanced features for TIM1 and TIM8 are - * enabled. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_PWM_USE_ADVANCED) || defined(__DOXYGEN__) -#define KINETIS_PWM_USE_ADVANCED FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/* Configuration checks. */ -/*===========================================================================*/ - -#if !KINETIS_PWM_USE_FTM0 && !KINETIS_PWM_USE_FTM1 && !KINETIS_PWM_USE_FTM2 -#error "PWM driver activated but no FTM peripheral assigned" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a PWM mode. - */ -typedef uint32_t pwmmode_t; - -/** - * @brief Type of a PWM channel. - */ -typedef uint8_t pwmchannel_t; - -/** - * @brief Type of a channels mask. - */ -typedef uint32_t pwmchnmsk_t; - -/** - * @brief Type of a PWM counter. - */ -typedef uint16_t pwmcnt_t; - -/** - * @brief Type of a PWM driver channel configuration structure. - */ -typedef struct { - /** - * @brief Channel active logic level. - */ - pwmmode_t mode; - - /** - * @brief Channel callback pointer. - * @note This callback is invoked on the channel compare event. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /* End of the mandatory fields.*/ -} PWMChannelConfig; - -/** - * @brief Type of a PWM driver configuration structure. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - uint32_t frequency; - /** - * @brief PWM period in ticks. - * @note The low level can use assertions in order to catch invalid - * period specifications. - */ - pwmcnt_t period; - /** - * @brief Periodic callback pointer. - * @note This callback is invoked on PWM counter reset. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /** - * @brief Channels configurations. - */ - PWMChannelConfig channels[PWM_CHANNELS]; - /* End of the mandatory fields.*/ -} PWMConfig; - -/** - * @brief Structure representing a PWM driver. - */ -struct PWMDriver { - /** - * @brief Driver state. - */ - pwmstate_t state; - /** - * @brief Current driver configuration data. - */ - const PWMConfig *config; - /** - * @brief Current PWM period in ticks. - */ - pwmcnt_t period; - /** - * @brief Mask of the enabled channels. - */ - pwmchnmsk_t enabled; - /** - * @brief Number of channels in this instance. - */ - pwmchannel_t channels; -#if defined(PWM_DRIVER_EXT_FIELDS) - PWM_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the FTM registers block. - */ - FTM_TypeDef *ftm; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the period the PWM peripheral. - * @details This function changes the period of a PWM unit that has already - * been activated using @p pwmStart(). - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The PWM unit period is changed to the new value. - * @note The function has effect at the next cycle start. - * @note If a period is specified that is shorter than the pulse width - * programmed in one of the channels then the behavior is not - * guaranteed. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] period new cycle time in ticks - * - * @notapi - */ -#define pwm_lld_change_period(pwmp, period) \ - do { \ - (pwmp)->ftm->MOD = ((period) - 1); \ - pwmp->ftm->PWMLOAD = FTM_PWMLOAD_LDOK_MASK;\ - } while(0) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_PWM_USE_FTM0 || defined(__DOXYGEN__) -extern PWMDriver PWMD1; -#endif -#if KINETIS_PWM_USE_FTM1 || defined(__DOXYGEN__) -extern PWMDriver PWMD2; -#endif -#if KINETIS_PWM_USE_FTM2 || defined(__DOXYGEN__) -extern PWMDriver PWMD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void pwm_lld_init(void); - void pwm_lld_start(PWMDriver *pwmp); - void pwm_lld_stop(PWMDriver *pwmp); - void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width); - void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel); - void pwm_lld_enable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_disable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); - void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PWM */ - -#endif /* HAL_PWM_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.c deleted file mode 100644 index 29ab4e8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.c +++ /dev/null @@ -1,539 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/spi_lld.c - * @brief KINETIS SPI subsystem low level driver source. - * - * @addtogroup SPI - * @{ - */ - -#include "hal.h" - -#if HAL_USE_SPI || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if !defined(KINETIS_SPI0_RX_DMA_IRQ_PRIORITY) -#define KINETIS_SPI0_RX_DMA_IRQ_PRIORITY 8 -#endif - -#if !defined(KINETIS_SPI0_RX_DMAMUX_CHANNEL) -#define KINETIS_SPI0_RX_DMAMUX_CHANNEL 0 -#endif - -#if !defined(KINETIS_SPI0_RX_DMA_CHANNEL) -#define KINETIS_SPI0_RX_DMA_CHANNEL 0 -#endif - -#if !defined(KINETIS_SPI0_TX_DMAMUX_CHANNEL) -#define KINETIS_SPI0_TX_DMAMUX_CHANNEL 1 -#endif - -#if !defined(KINETIS_SPI0_TX_DMA_CHANNEL) -#define KINETIS_SPI0_TX_DMA_CHANNEL 1 -#endif - -#if !defined(KINETIS_SPI1_RX_DMA_IRQ_PRIORITY) -#define KINETIS_SPI1_RX_DMA_IRQ_PRIORITY 8 -#endif - -#if !defined(KINETIS_SPI1_RX_DMAMUX_CHANNEL) -#define KINETIS_SPI1_RX_DMAMUX_CHANNEL 0 -#endif - -#if !defined(KINETIS_SPI1_RX_DMA_CHANNEL) -#define KINETIS_SPI1_RX_DMA_CHANNEL 0 -#endif - -#if !defined(KINETIS_SPI1_TX_DMAMUX_CHANNEL) -#define KINETIS_SPI1_TX_DMAMUX_CHANNEL 1 -#endif - -#if !defined(KINETIS_SPI1_TX_DMA_CHANNEL) -#define KINETIS_SPI1_TX_DMA_CHANNEL 1 -#endif - -#if KINETIS_SPI_USE_SPI0 -#define DMAMUX_SPI_RX_SOURCE 16 -#define DMAMUX_SPI_TX_SOURCE 17 -#endif - -#if KINETIS_SPI_USE_SPI1 -#define DMAMUX_SPI_RX_SOURCE 18 -#define DMAMUX_SPI_TX_SOURCE 19 -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief SPI0 driver identifier.*/ -#if KINETIS_SPI_USE_SPI0 || defined(__DOXYGEN__) -SPIDriver SPID1; -#endif - -/** @brief SPI1 driver identifier.*/ -#if KINETIS_SPI_USE_SPI1 || defined(__DOXYGEN__) -SPIDriver SPID2; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/* Use a dummy byte as the source/destination when a buffer is not provided */ -/* Note: The MMC driver relies on 0xFF being sent for dummy bytes. */ -static volatile uint16_t dmaRxDummy; -static uint16_t dmaTxDummy = 0xFFFF; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void spi_start_xfer(SPIDriver *spip, bool polling) -{ - /* - * Enable the DSPI peripheral in master mode. - * Clear the TX and RX FIFOs. - * */ - spip->spi->MCR = SPIx_MCR_MSTR | SPIx_MCR_CLR_TXF | SPIx_MCR_CLR_RXF; - - /* If we are not polling then enable DMA */ - if (!polling) { - - /* Enable receive dma and transmit dma */ - spip->spi->RSER = SPIx_RSER_RFDF_DIRS | SPIx_RSER_RFDF_RE | - SPIx_RSER_TFFF_RE | SPIx_RSER_TFFF_DIRS; - - /* Configure RX DMA */ - if (spip->rxbuf) { - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DADDR = (uint32_t)spip->rxbuf; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DOFF = spip->word_size; - } else { - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DADDR = (uint32_t)&dmaRxDummy; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DOFF = 0; - } - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].BITER_ELINKNO = spip->count; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].CITER_ELINKNO = spip->count; - - /* Enable Request Register (ERQ) for RX by writing 0 to SERQ */ - DMA->SERQ = KINETIS_SPI0_RX_DMA_CHANNEL; - - /* Configure TX DMA */ - if (spip->txbuf) { - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SADDR = (uint32_t)spip->txbuf; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SOFF = spip->word_size; - } else { - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SADDR = (uint32_t)&dmaTxDummy; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SOFF = 0; - } - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].BITER_ELINKNO = spip->count; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].CITER_ELINKNO = spip->count; - - /* Enable Request Register (ERQ) for TX by writing 1 to SERQ */ - DMA->SERQ = KINETIS_SPI0_TX_DMA_CHANNEL; - } -} - -static void spi_stop_xfer(SPIDriver *spip) -{ - /* Halt the DSPI peripheral */ - spip->spi->MCR = SPIx_MCR_MSTR | SPIx_MCR_HALT; - - /* Clear all the flags which are currently set. */ - spip->spi->SR |= spip->spi->SR; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if KINETIS_SPI_USE_SPI0 || defined(__DOXYGEN__) - -OSAL_IRQ_HANDLER(KINETIS_DMA0_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - /* Clear bit 0 in Interrupt Request Register (INT) by writing 0 to CINT */ - DMA->CINT = KINETIS_SPI0_RX_DMA_CHANNEL; - - spi_stop_xfer(&SPID1); - - _spi_isr_code(&SPID1); - - OSAL_IRQ_EPILOGUE(); -} - -#endif - -#if KINETIS_SPI_USE_SPI1 || defined(__DOXYGEN__) - -OSAL_IRQ_HANDLER(KINETIS_DMA0_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - /* Clear bit 0 in Interrupt Request Register (INT) by writing 0 to CINT */ - DMA->CINT = KINETIS_SPI1_RX_DMA_CHANNEL; - - spi_stop_xfer(&SPID2); - - _spi_isr_code(&SPID2); - - OSAL_IRQ_EPILOGUE(); -} - -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level SPI driver initialization. - * - * @notapi - */ -void spi_lld_init(void) { -#if KINETIS_SPI_USE_SPI0 - spiObjectInit(&SPID1); -#endif -#if KINETIS_SPI_USE_SPI1 - spiObjectInit(&SPID2); -#endif -} - -/** - * @brief Configures and activates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_start(SPIDriver *spip) { - - /* If in stopped state then enables the SPI and DMA clocks.*/ - if (spip->state == SPI_STOP) { - -#if KINETIS_SPI_USE_SPI0 - if (&SPID1 == spip) { - - /* Enable the clock for SPI0 */ - SIM->SCGC6 |= SIM_SCGC6_SPI0; - - SPID1.spi = SPI0; - - if (spip->config->tar0) { - spip->spi->CTAR[0] = spip->config->tar0; - } else { - spip->spi->CTAR[0] = KINETIS_SPI_TAR0_DEFAULT; - } - } -#endif - -#if KINETIS_SPI_USE_SPI1 - if (&SPID2 == spip) { - - /* Enable the clock for SPI0 */ - SIM->SCGC6 |= SIM_SCGC6_SPI1; - - SPID2.spi = SPI1; - - if (spip->config->tar0) { - spip->spi->CTAR[0] = spip->config->tar0; - } else { - spip->spi->CTAR[0] = KINETIS_SPI_TAR0_DEFAULT; - } - } -#endif - - nvicEnableVector(DMA0_IRQn, KINETIS_SPI0_RX_DMA_IRQ_PRIORITY); - - SIM->SCGC6 |= SIM_SCGC6_DMAMUX; - SIM->SCGC7 |= SIM_SCGC7_DMA; - - /* Clear DMA error flags */ - DMA->ERR = 0x0F; - -#if KINETIS_SPI_USE_SPI0 - /* Rx, select SPI Rx FIFO */ - DMAMUX->CHCFG[KINETIS_SPI0_RX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | - DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_RX_SOURCE); - - /* Tx, select SPI Tx FIFO */ - DMAMUX->CHCFG[KINETIS_SPI0_TX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | - DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_TX_SOURCE); - - /* Extract the frame size from the TAR */ - uint16_t frame_size = ((spip->spi->CTAR[0] >> SPIx_CTARn_FMSZ_SHIFT) & - SPIx_CTARn_FMSZ_MASK) + 1; - - /* DMA transfer size is 16 bits for a frame size > 8 bits */ - uint16_t dma_size = frame_size > 8 ? 1 : 0; - - /* DMA word size is 2 for a 16 bit frame size */ - spip->word_size = frame_size > 8 ? 2 : 1; - - /* configure DMA RX fixed values */ - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].SADDR = (uint32_t)&SPI0->POPR; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].SOFF = 0; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].SLAST = 0; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DLASTSGA = 0; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | - DMA_ATTR_DSIZE(dma_size); - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; - DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK | - DMA_CSR_INTMAJOR_MASK; - - /* configure DMA TX fixed values */ - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SLAST = 0; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].DADDR = (uint32_t)&SPI0->PUSHR; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].DOFF = 0; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].DLASTSGA = 0; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | - DMA_ATTR_DSIZE(dma_size); - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; - DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK; -#endif - -#if KINETIS_SPI_USE_SPI1 - /* Rx, select SPI Rx FIFO */ - DMAMUX->CHCFG[KINETIS_SPI1_RX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | - DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_RX_SOURCE); - - /* Tx, select SPI Tx FIFO */ - DMAMUX->CHCFG[KINETIS_SPI1_TX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | - DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_TX_SOURCE); - - /* Extract the frame size from the TAR */ - uint16_t frame_size = ((spip->spi->CTAR[0] >> SPIx_CTARn_FMSZ_SHIFT) & - SPIx_CTARn_FMSZ_MASK) + 1; - - /* DMA transfer size is 16 bits for a frame size > 8 bits */ - uint16_t dma_size = frame_size > 8 ? 1 : 0; - - /* DMA word size is 2 for a 16 bit frame size */ - spip->word_size = frame_size > 8 ? 2 : 1; - - /* configure DMA RX fixed values */ - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].SADDR = (uint32_t)&SPI1->POPR; - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].SOFF = 0; - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].SLAST = 0; - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].DLASTSGA = 0; - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | - DMA_ATTR_DSIZE(dma_size); - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; - DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK | - DMA_CSR_INTMAJOR_MASK; - - /* configure DMA TX fixed values */ - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].SLAST = 0; - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].DADDR = (uint32_t)&SPI1->PUSHR; - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].DOFF = 0; - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].DLASTSGA = 0; - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | - DMA_ATTR_DSIZE(dma_size); - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; - DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK; -#endif - } -} - -/** - * @brief Deactivates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_stop(SPIDriver *spip) { - - /* If in ready state then disables the SPI clock.*/ - if (spip->state == SPI_READY) { - - nvicDisableVector(DMA0_IRQn); - - SIM->SCGC7 &= ~SIM_SCGC7_DMA; - SIM->SCGC6 &= ~SIM_SCGC6_DMAMUX; - -#if KINETIS_SPI_USE_SPI0 - if (&SPID1 == spip) { - /* SPI halt.*/ - spip->spi->MCR |= SPIx_MCR_HALT; - } - - /* Disable the clock for SPI0 */ - SIM->SCGC6 &= ~SIM_SCGC6_SPI0; -#endif - -#if KINETIS_SPI_USE_SPI1 - if (&SPID2 == spip) { - /* SPI halt.*/ - spip->spi->MCR |= SPIx_MCR_HALT; - } - - /* Disable the clock for SPI1 */ - SIM->SCGC6 &= ~SIM_SCGC6_SPI1; -#endif - } -} - -/** - * @brief Asserts the slave select signal and prepares for transfers. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_select(SPIDriver *spip) { - - palClearPad(spip->config->ssport, spip->config->sspad); -} - -/** - * @brief Deasserts the slave select signal. - * @details The previously selected peripheral is unselected. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_unselect(SPIDriver *spip) { - - palSetPad(spip->config->ssport, spip->config->sspad); -} - -/** - * @brief Ignores data on the SPI bus. - * @details This asynchronous function starts the transmission of a series of - * idle words on the SPI bus and ignores the received data. - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be ignored - * - * @notapi - */ -void spi_lld_ignore(SPIDriver *spip, size_t n) { - - spip->count = n; - spip->rxbuf = NULL; - spip->txbuf = NULL; - - spi_start_xfer(spip, false); -} - -/** - * @brief Exchanges data on the SPI bus. - * @details This asynchronous function starts a simultaneous transmit/receive - * operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be exchanged - * @param[in] txbuf the pointer to the transmit buffer - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_exchange(SPIDriver *spip, size_t n, - const void *txbuf, void *rxbuf) { - - spip->count = n; - spip->rxbuf = rxbuf; - spip->txbuf = txbuf; - - spi_start_xfer(spip, false); -} - -/** - * @brief Sends data over the SPI bus. - * @details This asynchronous function starts a transmit operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to send - * @param[in] txbuf the pointer to the transmit buffer - * - * @notapi - */ -void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) { - - spip->count = n; - spip->rxbuf = NULL; - spip->txbuf = (void *)txbuf; - - spi_start_xfer(spip, false); -} - -/** - * @brief Receives data from the SPI bus. - * @details This asynchronous function starts a receive operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to receive - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) { - - spip->count = n; - spip->rxbuf = rxbuf; - spip->txbuf = NULL; - - spi_start_xfer(spip, false); -} - -/** - * @brief Exchanges one frame using a polled wait. - * @details This synchronous function exchanges one frame using a polled - * synchronization method. This function is useful when exchanging - * small amount of data on high speed channels, usually in this - * situation is much more efficient just wait for completion using - * polling than suspending the thread waiting for an interrupt. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] frame the data frame to send over the SPI bus - * @return The received data frame from the SPI bus. - */ -uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) { - - spi_start_xfer(spip, true); - - spip->spi->PUSHR = SPIx_PUSHR_TXDATA(frame); - - while ((spip->spi->SR & SPIx_SR_RFDF) == 0) - ; - - frame = spip->spi->POPR; - - spi_stop_xfer(spip); - - return frame; -} - -#endif /* HAL_USE_SPI */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.h deleted file mode 100644 index 0cf108e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/hal_spi_lld.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/spi_lld.h - * @brief KINETIS SPI subsystem low level driver header. - * - * @addtogroup SPI - * @{ - */ - -#ifndef HAL_SPI_LLD_H_ -#define HAL_SPI_LLD_H_ - -#if HAL_USE_SPI || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief SPI0 driver enable switch. - * @details If set to @p TRUE the support for SPI0 is included. - * @note The default is @p FALSE. - */ -#if !defined(KINETIS_SPI_USE_SPI0) || defined(__DOXYGEN__) -#define KINETIS_SPI_USE_SPI0 FALSE -#endif - -/** - * @brief SPI0 interrupt priority level setting. - */ -#if !defined(KINETIS_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_SPI_SPI0_IRQ_PRIORITY 10 -#endif - -/** - * @brief SPI1 driver enable switch. - * @details If set to @p TRUE the support for SPI0 is included. - * @note The default is @p FALSE. - */ -#if !defined(KINETIS_SPI_USE_SPI1) || defined(__DOXYGEN__) -#define KINETIS_SPI_USE_SPI1 FALSE -#endif - -/** - * @brief SPI1 interrupt priority level setting. - */ -#if !defined(KINETIS_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_SPI_SPI1_IRQ_PRIORITY 10 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if KINETIS_SPI_USE_SPI0 && !KINETIS_HAS_SPI0 -#error "SPI0 not present in the selected device" -#endif - -#if KINETIS_SPI_USE_SPI1 && !KINETIS_HAS_SPI1 -#error "SPI1 not present in the selected device" -#endif - -#if KINETIS_SPI_USE_SPI0 && KINETIS_SPI_USE_SPI1 -#error "Only one SPI peripheral can be enabled" -#endif - -#if !(KINETIS_SPI_USE_SPI0 || KINETIS_SPI_USE_SPI1) -#error "SPI driver activated but no SPI peripheral assigned" -#endif - -#if KINETIS_SPI_USE_SPI0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SPI0" -#endif - -#if KINETIS_SPI_USE_SPI1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SPI1" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an SPI driver. - */ -typedef struct SPIDriver SPIDriver; - -/** - * @brief SPI notification callback type. - * - * @param[in] spip pointer to the @p SPIDriver object triggering the - * callback - */ -typedef void (*spicallback_t)(SPIDriver *spip); - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /** - * @brief Operation complete callback or @p NULL. - */ - spicallback_t end_cb; - /* End of the mandatory fields.*/ - /** - * @brief The chip select line port - when not using pcs. - */ - ioportid_t ssport; - /** - * @brief The chip select line pad number - when not using pcs. - */ - uint16_t sspad; - /** - * @brief SPI initialization data. - */ - uint32_t tar0; -} SPIConfig; - -/** - * @brief Structure representing a SPI driver. - */ -struct SPIDriver { - /** - * @brief Driver state. - */ - spistate_t state; - /** - * @brief Current configuration data. - */ - const SPIConfig *config; -#if SPI_USE_WAIT || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif /* SPI_USE_WAIT */ -#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#endif /* SPI_USE_MUTUAL_EXCLUSION */ -#if defined(SPI_DRIVER_EXT_FIELDS) - SPI_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the SPIx registers block. - */ - SPI_TypeDef *spi; - /** - * @brief Number of bytes/words of data to transfer. - */ - size_t count; - /** - * @brief Word size in bytes. - */ - size_t word_size; - /** - * @brief Pointer to the buffer with data to send. - */ - const uint8_t *txbuf; - /** - * @brief Pointer to the buffer to put received data. - */ - uint8_t *rxbuf; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* TAR settings for n bits at SYSCLK / 2 */ -#define KINETIS_SPI_TAR_SYSCLK_DIV_2(n)\ - SPIx_CTARn_FMSZ((n) - 1) | \ - SPIx_CTARn_CPOL | \ - SPIx_CTARn_CPHA | \ - SPIx_CTARn_DBR | \ - SPIx_CTARn_PBR(0) | \ - SPIx_CTARn_BR(0) | \ - SPIx_CTARn_CSSCK(0) | \ - SPIx_CTARn_ASC(0) | \ - SPIx_CTARn_DT(0) - -/* TAR settings for n bits at SYSCLK / 4096 for debugging */ -#define KINETIS_SPI_TAR_SYSCLK_DIV_4096(n) \ - SPIx_CTARn_FMSZ(((n) - 1)) | \ - SPIx_CTARn_CPOL | \ - SPIx_CTARn_CPHA | \ - SPIx_CTARn_PBR(0) | \ - SPIx_CTARn_BR(0xB) | \ - SPIx_CTARn_CSSCK(0xB) | \ - SPIx_CTARn_ASC(0x7) | \ - SPIx_CTARn_DT(0xB) - -#define KINETIS_SPI_TAR_8BIT_FAST KINETIS_SPI_TAR_SYSCLK_DIV_2(8) -#define KINETIS_SPI_TAR_8BIT_SLOW KINETIS_SPI_TAR_SYSCLK_DIV_4096(8) - -#define KINETIS_SPI_TAR0_DEFAULT KINETIS_SPI_TAR_SYSCLK_DIV_2(8) -#define KINETIS_SPI_TAR1_DEFAULT KINETIS_SPI_TAR_SYSCLK_DIV_2(8) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_SPI_USE_SPI0 && !defined(__DOXYGEN__) -extern SPIDriver SPID1; -#endif - -#if KINETIS_SPI_USE_SPI1 && !defined(__DOXYGEN__) -extern SPIDriver SPID2; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void spi_lld_init(void); - void spi_lld_start(SPIDriver *spip); - void spi_lld_stop(SPIDriver *spip); - void spi_lld_select(SPIDriver *spip); - void spi_lld_unselect(SPIDriver *spip); - void spi_lld_ignore(SPIDriver *spip, size_t n); - void spi_lld_exchange(SPIDriver *spip, size_t n, - const void *txbuf, void *rxbuf); - void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf); - void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf); - uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SPI */ - -#endif /* HAL_SPI_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/kinetis_registry.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/kinetis_registry.h deleted file mode 100644 index d2eea6f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/kinetis_registry.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file K20x/kinetis_registry.h - * @brief K20x capabilities registry. - * - * @addtogroup HAL - * @{ - */ - -#ifndef KINETIS_REGISTRY_H_ -#define KINETIS_REGISTRY_H_ - -#if !defined(K20x) || defined(__DOXYGEN__) -#define K20x -#endif - -/*===========================================================================*/ -/* Platform capabilities. */ -/*===========================================================================*/ - -/** - * @name K20x capabilities - * @{ - */ -/*===========================================================================*/ -/* K20x5 */ -/*===========================================================================*/ -#if defined(K20x5) || defined(__DOXYGEN__) - -/** - * @brief Maximum system and core clock (f_SYS) frequency. - */ -#define KINETIS_SYSCLK_MAX 50000000L - -/** - * @brief Maximum bus clock (f_BUS) frequency. - */ -#define KINETIS_BUSCLK_MAX 50000000L - -/** - * @brief Maximum flash clock (f_FLASH) frequency. - */ -#define KINETIS_FLASHCLK_MAX 25000000L - -/* ADC attributes.*/ -#define KINETIS_HAS_ADC0 TRUE -#define KINETIS_ADC0_IRQ_VECTOR Vector98 -#define KINETIS_HAS_ADC1 FALSE - -/* DAC attributes.*/ -#define KINETIS_HAS_DAC0 FALSE - -/* DMA attributes.*/ -#define KINETIS_DMA0_IRQ_VECTOR Vector40 -#define KINETIS_DMA1_IRQ_VECTOR Vector44 -#define KINETIS_DMA2_IRQ_VECTOR Vector48 -#define KINETIS_DMA3_IRQ_VECTOR Vector4C -#define KINETIS_HAS_DMA_ERROR_IRQ TRUE -#define KINETIS_DMA_ERROR_IRQ_VECTOR Vector50 - -/* EXT attributes.*/ -#define KINETIS_PORTA_IRQ_VECTOR VectorE0 -#define KINETIS_PORTB_IRQ_VECTOR VectorE4 -#define KINETIS_PORTC_IRQ_VECTOR VectorE8 -#define KINETIS_PORTD_IRQ_VECTOR VectorEC -#define KINETIS_PORTE_IRQ_VECTOR VectorF0 -#define KINETIS_EXT_HAS_COMMON_CD_IRQ FALSE -#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE -#define KINETIS_GPIO_HAS_OPENDRAIN TRUE - -/* I2C attributes.*/ -#define KINETIS_HAS_I2C0 TRUE -#define KINETIS_I2C0_IRQ_VECTOR Vector6C -#define KINETIS_HAS_I2C1 FALSE - -/* Serial attributes.*/ -#define KINETIS_HAS_SERIAL0 TRUE -#define KINETIS_SERIAL0_IRQ_VECTOR Vector80 -#define KINETIS_HAS_SERIAL1 TRUE -#define KINETIS_SERIAL1_IRQ_VECTOR Vector88 -#define KINETIS_HAS_SERIAL2 TRUE -#define KINETIS_SERIAL2_IRQ_VECTOR Vector90 -#define KINETIS_HAS_SERIAL_ERROR_IRQ TRUE -#define KINETIS_SERIAL0_ERROR_IRQ_VECTOR Vector84 -#define KINETIS_SERIAL1_ERROR_IRQ_VECTOR Vector8C -#define KINETIS_SERIAL2_ERROR_IRQ_VECTOR Vector94 -#define KINETIS_SERIAL0_IS_LPUART FALSE -#define KINETIS_SERIAL0_IS_UARTLP FALSE -#define KINETIS_SERIAL1_IS_LPUART FALSE - -/* SPI attributes.*/ -#define KINETIS_HAS_SPI0 TRUE -#define KINETIS_SPI0_IRQ_VECTOR Vector70 -#define KINETIS_HAS_SPI1 FALSE - -/* FlexTimer attributes.*/ -#define KINETIS_FTM0_CHANNELS 8 -#define KINETIS_FTM1_CHANNELS 2 - -#define KINETIS_FTM0_IRQ_VECTOR VectorA4 -#define KINETIS_FTM1_IRQ_VECTOR VectorA8 -#define KINETIS_HAS_FTM2 FALSE - -/* GPT attributes.*/ -#define KINETIS_HAS_PIT0 TRUE -#define KINETIS_PIT0_IRQ_VECTOR VectorB8 -#define KINETIS_HAS_PIT1 TRUE -#define KINETIS_PIT1_IRQ_VECTOR VectorBC -#define KINETIS_HAS_PIT2 TRUE -#define KINETIS_PIT2_IRQ_VECTOR VectorC0 -#define KINETIS_HAS_PIT3 TRUE -#define KINETIS_PIT3_IRQ_VECTOR VectorC4 -#define KINETIS_HAS_PIT_COMMON_IRQ FALSE - -/* USB attributes.*/ -#define KINETIS_HAS_USB TRUE -#define KINETIS_USB_IRQ_VECTOR VectorCC -#define KINETIS_USB0_IS_USBOTG TRUE -#define KINETIS_HAS_USB_CLOCK_RECOVERY FALSE - -/* LPTMR attributes.*/ -#define KINETIS_LPTMR0_IRQ_VECTOR VectorDC - -/*===========================================================================*/ -/* K20x7 */ -/*===========================================================================*/ -#elif defined(K20x7) - -/** - * @brief Maximum system and core clock (f_SYS) frequency. - */ -#define KINETIS_SYSCLK_MAX 72000000L - -/** - * @brief Maximum bus clock (f_BUS) frequency. - */ -#define KINETIS_BUSCLK_MAX 50000000L - -/** - * @brief Maximum flash clock (f_FLASH) frequency. - */ -#define KINETIS_FLASHCLK_MAX 25000000L - -/** - * @name K20x7 attributes - * @{ - */ - -/* ADC attributes.*/ -#define KINETIS_HAS_ADC0 TRUE -#define KINETIS_ADC0_IRQ_VECTOR Vector124 -#define KINETIS_HAS_ADC1 TRUE -#define KINETIS_ADC1_IRQ_VECTOR Vector128 - -/* DAC attributes.*/ -#define KINETIS_HAS_DAC0 TRUE -#define KINTEIS_DAC0_IRQ_VECTOR Vector184 - -/* DMA attributes.*/ -#define KINETIS_DMA0_IRQ_VECTOR Vector40 -#define KINETIS_DMA1_IRQ_VECTOR Vector44 -#define KINETIS_DMA2_IRQ_VECTOR Vector48 -#define KINETIS_DMA3_IRQ_VECTOR Vector4C -#define KINETIS_HAS_DMA_ERROR_IRQ TRUE -#define KINETIS_DMA_ERROR_IRQ_VECTOR Vector50 - -/* EXT attributes.*/ -#define KINETIS_PORTA_IRQ_VECTOR Vector19C -#define KINETIS_PORTB_IRQ_VECTOR Vector1A0 -#define KINETIS_PORTC_IRQ_VECTOR Vector1A4 -#define KINETIS_PORTD_IRQ_VECTOR Vector1A8 -#define KINETIS_PORTE_IRQ_VECTOR Vector1AC -#define KINETIS_EXT_HAS_COMMON_CD_IRQ FALSE -#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE -#define KINETIS_GPIO_HAS_OPENDRAIN TRUE - -/* I2C attributes.*/ -#define KINETIS_HAS_I2C0 TRUE -#define KINETIS_I2C0_IRQ_VECTOR VectorA0 -#define KINETIS_HAS_I2C1 TRUE -#define KINETIS_I2C1_IRQ_VECTOR VectorA4 - -/* Serial attributes.*/ -#define KINETIS_HAS_SERIAL0 TRUE -#define KINETIS_SERIAL0_IRQ_VECTOR VectorF4 -#define KINETIS_HAS_SERIAL1 TRUE -#define KINETIS_SERIAL1_IRQ_VECTOR VectorFC -#define KINETIS_HAS_SERIAL2 TRUE -#define KINETIS_SERIAL2_IRQ_VECTOR Vector104 -#define KINETIS_HAS_SERIAL_ERROR_IRQ TRUE -#define KINETIS_SERIAL0_ERROR_IRQ_VECTOR VectorF8 -#define KINETIS_SERIAL1_ERROR_IRQ_VECTOR Vector100 -#define KINETIS_SERIAL2_ERROR_IRQ_VECTOR Vector108 -#define KINETIS_SERIAL0_IS_LPUART FALSE -#define KINETIS_SERIAL0_IS_UARTLP FALSE -#define KINETIS_SERIAL1_IS_LPUART FALSE - -/* SPI attributes.*/ -#define KINETIS_HAS_SPI0 TRUE -#define KINETIS_SPI0_IRQ_VECTOR VectorA8 -#define KINETIS_HAS_SPI1 TRUE -#define KINETIS_SPI1_IRQ_VECTOR VectorAC - -/* FlexTimer attributes.*/ -#define KINETIS_FTM0_CHANNELS 8 -#define KINETIS_FTM1_CHANNELS 2 -#define KINETIS_FTM2_CHANNELS 2 - -#define KINETIS_FTM0_IRQ_VECTOR Vector138 -#define KINETIS_FTM1_IRQ_VECTOR Vector13C -#define KINETIS_HAS_FTM2 TRUE -#define KINETIS_FTM2_IRQ_VECTOR Vector140 - -/* GPT attributes.*/ -#define KINETIS_HAS_PIT0 TRUE -#define KINETIS_PIT0_IRQ_VECTOR Vector150 -#define KINETIS_HAS_PIT1 TRUE -#define KINETIS_PIT1_IRQ_VECTOR Vector154 -#define KINETIS_HAS_PIT2 TRUE -#define KINETIS_PIT2_IRQ_VECTOR Vector158 -#define KINETIS_HAS_PIT3 TRUE -#define KINETIS_PIT3_IRQ_VECTOR Vector15C -#define KINETIS_HAS_PIT FALSE -#define KINETIS_PIT_CHANNELS 4 -#define KINETIS_HAS_PIT_COMMON_IRQ FALSE - -/* USB attributes.*/ -#define KINETIS_HAS_USB TRUE -#define KINETIS_USB_IRQ_VECTOR Vector164 -#define KINETIS_USB0_IS_USBOTG TRUE -#define KINETIS_HAS_USB_CLOCK_RECOVERY FALSE - -/* LPTMR attributes.*/ -#define KINETIS_LPTMR0_IRQ_VECTOR Vector194 - -#endif /* K20xY */ - -/** @} */ - -#endif /* KINETIS_REGISTRY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.dox b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.dox deleted file mode 100644 index 3fb142d..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.dox +++ /dev/null @@ -1,365 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* TODO Still need to edit this entire file */ - -/** - * @defgroup MK20D5_DRIVERS MK20D5 Drivers - * @details This section describes all the supported drivers on the MK20D5 - * platform and the implementation details of the single drivers. - * - * @ingroup platforms - */ - -/** - * @defgroup MK20D5_HAL MK20D5 Initialization Support - * @details The MK20D5 HAL support is responsible for system initialization. - * - * @section mk20d5_hal_1 Supported HW resources - * - PLL1. - * - PLL2. - * - RCC. - * - Flash. - * . - * @section mk20d5_hal_2 MK20D5 HAL driver implementation features - * - PLL startup and stabilization. - * - Clock tree initialization. - * - Clock source selection. - * - Flash wait states initialization based on the selected clock options. - * - SYSTICK initialization based on current clock and kernel required rate. - * - DMA support initialization. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_ADC MK20D5 ADC Support - * @details The MK20D5 ADC driver supports the ADC peripherals using DMA - * channels for maximum performance. - * - * @section mk20d5_adc_1 Supported HW resources - * - ADC1. - * - ADC2. - * - ADC3. - * - DMA2. - * . - * @section mk20d5_adc_2 MK20D5 ADC driver implementation features - * - Clock stop for reduced power usage when the driver is in stop state. - * - Streaming conversion using DMA for maximum performance. - * - Programmable ADC interrupt priority level. - * - Programmable DMA bus priority for each DMA channel. - * - Programmable DMA interrupt priority for each DMA channel. - * - DMA and ADC errors detection. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_CAN MK20D5 CAN Support - * @details The MK20D5 CAN driver uses the CAN peripherals. - * - * @section mk20d5_can_1 Supported HW resources - * - bxCAN1. - * . - * @section mk20d5_can_2 MK20D5 CAN driver implementation features - * - Clock stop for reduced power usage when the driver is in stop state. - * - Support for bxCAN sleep mode. - * - Programmable bxCAN interrupts priority level. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_EXT MK20D5 EXT Support - * @details The MK20D5 EXT driver uses the EXTI peripheral. - * - * @section mk20d5_ext_1 Supported HW resources - * - EXTI. - * . - * @section mk20d5_ext_2 MK20D5 EXT driver implementation features - * - Each EXTI channel can be independently enabled and programmed. - * - Programmable EXTI interrupts priority level. - * - Capability to work as event sources (WFE) rather than interrupt sources. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_GPT MK20D5 GPT Support - * @details The MK20D5 GPT driver uses the TIMx peripherals. - * - * @section mk20d5_gpt_1 Supported HW resources - * - TIM1. - * - TIM2. - * - TIM3. - * - TIM4. - * - TIM5. - * - TIM8. - * . - * @section mk20d5_gpt_2 MK20D5 GPT driver implementation features - * - Each timer can be independently enabled and programmed. Unused - * peripherals are left in low power mode. - * - Programmable TIMx interrupts priority level. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_ICU MK20D5 ICU Support - * @details The MK20D5 ICU driver uses the TIMx peripherals. - * - * @section mk20d5_icu_1 Supported HW resources - * - TIM1. - * - TIM2. - * - TIM3. - * - TIM4. - * - TIM5. - * - TIM8. - * . - * @section mk20d5_icu_2 MK20D5 ICU driver implementation features - * - Each timer can be independently enabled and programmed. Unused - * peripherals are left in low power mode. - * - Programmable TIMx interrupts priority level. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_MAC MK20D5 MAC Support - * @details The MK20D5 MAC driver supports the ETH peripheral. - * - * @section mk20d5_mac_1 Supported HW resources - * - ETH. - * - PHY (external). - * . - * @section mk20d5_mac_2 MK20D5 MAC driver implementation features - * - Dedicated DMA operations. - * - Support for checksum off-loading. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_PAL MK20D5 PAL Support - * @details The MK20D5 PAL driver uses the GPIO peripherals. - * - * @section mk20d5_pal_1 Supported HW resources - * - GPIOA. - * - GPIOB. - * - GPIOC. - * - GPIOD. - * - GPIOE. - * - GPIOF. - * - GPIOG. - * - GPIOH. - * - GPIOI. - * . - * @section mk20d5_pal_2 MK20D5 PAL driver implementation features - * The PAL driver implementation fully supports the following hardware - * capabilities: - * - 16 bits wide ports. - * - Atomic set/reset functions. - * - Atomic set+reset function (atomic bus operations). - * - Output latched regardless of the pad setting. - * - Direct read of input pads regardless of the pad setting. - * . - * @section mk20d5_pal_3 Supported PAL setup modes - * The MK20D5 PAL driver supports the following I/O modes: - * - @p PAL_MODE_RESET. - * - @p PAL_MODE_UNCONNECTED. - * - @p PAL_MODE_INPUT. - * - @p PAL_MODE_INPUT_PULLUP. - * - @p PAL_MODE_INPUT_PULLDOWN. - * - @p PAL_MODE_INPUT_ANALOG. - * - @p PAL_MODE_OUTPUT_PUSHPULL. - * - @p PAL_MODE_OUTPUT_OPENDRAIN. - * - @p PAL_MODE_ALTERNATE (non standard). - * . - * Any attempt to setup an invalid mode is ignored. - * - * @section mk20d5_pal_4 Suboptimal behavior - * The MK20D5 GPIO is less than optimal in several areas, the limitations - * should be taken in account while using the PAL driver: - * - Pad/port toggling operations are not atomic. - * - Pad/group mode setup is not atomic. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_PWM MK20D5 PWM Support - * @details The MK20D5 PWM driver uses the TIMx peripherals. - * - * @section mk20d5_pwm_1 Supported HW resources - * - TIM1. - * - TIM2. - * - TIM3. - * - TIM4. - * - TIM5. - * - TIM8. - * . - * @section mk20d5_pwm_2 MK20D5 PWM driver implementation features - * - Each timer can be independently enabled and programmed. Unused - * peripherals are left in low power mode. - * - Four independent PWM channels per timer. - * - Programmable TIMx interrupts priority level. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_SDC MK20D5 SDC Support - * @details The MK20D5 SDC driver uses the SDIO peripheral. - * - * @section mk20d5_sdc_1 Supported HW resources - * - SDIO. - * - DMA2. - * . - * @section mk20d5_sdc_2 MK20D5 SDC driver implementation features - * - Clock stop for reduced power usage when the driver is in stop state. - * - Programmable interrupt priority. - * - DMA is used for receiving and transmitting. - * - Programmable DMA bus priority for each DMA channel. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_SERIAL MK20D5 Serial Support - * @details The MK20D5 Serial driver uses the USART/UART peripherals in a - * buffered, interrupt driven, implementation. - * - * @section mk20d5_serial_1 Supported HW resources - * The serial driver can support any of the following hardware resources: - * - USART1. - * - USART2. - * - USART3. - * - UART4. - * - UART5. - * - USART6. - * . - * @section mk20d5_serial_2 MK20D5 Serial driver implementation features - * - Clock stop for reduced power usage when the driver is in stop state. - * - Each UART/USART can be independently enabled and programmed. Unused - * peripherals are left in low power mode. - * - Fully interrupt driven. - * - Programmable priority levels for each UART/USART. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_SPI MK20D5 SPI Support - * @details The SPI driver supports the MK20D5 SPI peripherals using DMA - * channels for maximum performance. - * - * @section mk20d5_spi_1 Supported HW resources - * - SPI1. - * - SPI2. - * - SPI3. - * - DMA1. - * - DMA2. - * . - * @section mk20d5_spi_2 MK20D5 SPI driver implementation features - * - Clock stop for reduced power usage when the driver is in stop state. - * - Each SPI can be independently enabled and programmed. Unused - * peripherals are left in low power mode. - * - Programmable interrupt priority levels for each SPI. - * - DMA is used for receiving and transmitting. - * - Programmable DMA bus priority for each DMA channel. - * - Programmable DMA interrupt priority for each DMA channel. - * - Programmable DMA error hook. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_UART MK20D5 UART Support - * @details The UART driver supports the MK20D5 USART peripherals using DMA - * channels for maximum performance. - * - * @section mk20d5_uart_1 Supported HW resources - * The UART driver can support any of the following hardware resources: - * - USART1. - * - USART2. - * - USART3. - * - DMA1. - * - DMA2. - * . - * @section mk20d5_uart_2 MK20D5 UART driver implementation features - * - Clock stop for reduced power usage when the driver is in stop state. - * - Each UART/USART can be independently enabled and programmed. Unused - * peripherals are left in low power mode. - * - Programmable interrupt priority levels for each UART/USART. - * - DMA is used for receiving and transmitting. - * - Programmable DMA bus priority for each DMA channel. - * - Programmable DMA interrupt priority for each DMA channel. - * - Programmable DMA error hook. - * . - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_PLATFORM_DRIVERS MK20D5 Platform Drivers - * @details Platform support drivers. Platform drivers do not implement HAL - * standard driver templates, their role is to support platform - * specific functionalities. - * - * @ingroup MK20D5_DRIVERS - */ - -/** - * @defgroup MK20D5_DMA MK20D5 DMA Support - * @details This DMA helper driver is used by the other drivers in order to - * access the shared DMA resources in a consistent way. - * - * @section mk20d5_dma_1 Supported HW resources - * The DMA driver can support any of the following hardware resources: - * - DMA1. - * - DMA2. - * . - * @section mk20d5_dma_2 MK20D5 DMA driver implementation features - * - Exports helper functions/macros to the other drivers that share the - * DMA resource. - * - Automatic DMA clock stop when not in use by any driver. - * - DMA streams and interrupt vectors sharing among multiple drivers. - * . - * @ingroup MK20D5_PLATFORM_DRIVERS - */ - -/** - * @defgroup MK20D5_ISR MK20D5 ISR Support - * @details This ISR helper driver is used by the other drivers in order to - * map ISR names to physical vector names. - * - * @ingroup MK20D5_PLATFORM_DRIVERS - */ - -/** - * @defgroup MK20D5_RCC MK20D5 RCC Support - * @details This RCC helper driver is used by the other drivers in order to - * access the shared RCC resources in a consistent way. - * - * @section mk20d5_rcc_1 Supported HW resources - * - RCC. - * . - * @section mk20d5_rcc_2 MK20D5 RCC driver implementation features - * - Peripherals reset. - * - Peripherals clock enable. - * - Peripherals clock disable. - * . - * @ingroup MK20D5_PLATFORM_DRIVERS - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.mk deleted file mode 100644 index beee336..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/K20x/platform.mk +++ /dev/null @@ -1,18 +0,0 @@ -# List of all platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/K20x/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/K20x/hal_spi_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_adc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/K20x/hal_pwm_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_usb_lld.c - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/K20x \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.c deleted file mode 100644 index 77addf0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.c +++ /dev/null @@ -1,472 +0,0 @@ -/* - ChibiOS - Copyright (C) 2013-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/hal_lld.c - * @brief Kinetis KL2x HAL Driver subsystem low level driver source. - * - * @addtogroup HAL - * @{ - */ - -#include "osal.h" -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -#ifdef __CC_ARM -__attribute__ ((section(".ARM.__at_0x400"))) -#else -__attribute__ ((used,section(".cfmconfig"))) -#endif -const uint8_t _cfm[0x10] = { - 0xFF, /* NV_BACKKEY3: KEY=0xFF */ - 0xFF, /* NV_BACKKEY2: KEY=0xFF */ - 0xFF, /* NV_BACKKEY1: KEY=0xFF */ - 0xFF, /* NV_BACKKEY0: KEY=0xFF */ - 0xFF, /* NV_BACKKEY7: KEY=0xFF */ - 0xFF, /* NV_BACKKEY6: KEY=0xFF */ - 0xFF, /* NV_BACKKEY5: KEY=0xFF */ - 0xFF, /* NV_BACKKEY4: KEY=0xFF */ - 0xFF, /* NV_FPROT3: PROT=0xFF */ - 0xFF, /* NV_FPROT2: PROT=0xFF */ - 0xFF, /* NV_FPROT1: PROT=0xFF */ - 0xFF, /* NV_FPROT0: PROT=0xFF */ -#if defined(KINETIS_NV_FSEC_BYTE) - #warning Please triple check your FSEC setting: KEYEN!=b10, MEEN==b10, SEC!=b10 leads to an unmodifiable chip. - KINETIS_NV_FSEC_BYTE, -#else /* KINETIS_NV_FSEC_BYTE */ - 0x7E, /* NV_FSEC: KEYEN=1,MEEN=3,FSLACC=3,SEC=2 */ -#endif /* KINETIS_NV_FSEC_BYTE */ -#if defined(KINETIS_NV_FOPT_BYTE) - KINETIS_NV_FOPT_BYTE, -#else /* KINETIS_NV_FOPT_BYTE */ - 0xFF, /* NV_FOPT: ??=1,??=1,FAST_INIT=1,LPBOOT1=1,RESET_PIN_CFG=1, - NMI_DIS=1,EZPORT_DIS=1,LPBOOT0=1 */ - /* on KL27: bit7-6:BOOTSRC_SEL=0b11 (11=from ROM; 00=from FLASH) - bit1:BOOTPIN_OPT=1 (NMI pin not sampled at boot) */ -#endif /* KINETIS_NV_FOPT_BYTE */ - 0xFF, - 0xFF -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * - * @notapi - */ -void hal_lld_init(void) { -} - -/** - * @brief KL2x clocks and PLL initialization. - * @note All the involved constants come from the file @p board.h. - * @note This function should be invoked just after the system reset. - * - * @special - */ -void kl2x_clock_init(void) { -#if !KINETIS_NO_INIT - - /* Disable COP watchdog */ - SIM->COPC = 0; - - /* Enable PORTA */ - SIM->SCGC5 |= SIM_SCGC5_PORTA; - - /* --- MCG mode: FEI (default out of reset) --- - f_MCGOUTCLK = f_int * F - F is the FLL factor selected by C4[DRST_DRS] and C4[DMX32] bits. - Typical f_MCGOUTCLK = 21 MHz immediately after reset. - C4[DMX32]=0 and C4[DRST_DRS]=00 => FLL factor=640. - C3[SCTRIM] and C4[SCFTRIM] factory trim values apply to f_int. */ - - /* System oscillator drives 32 kHz clock (OSC32KSEL=0) */ - SIM->SOPT1 &= ~SIM_SOPT1_OSC32KSEL_MASK; - -#if KINETIS_HAS_MCG_LITE -/* MCU only has MCG_Lite */ - -#if KINETIS_MCGLITE_MODE == KINETIS_MCGLITE_MODE_LIRC8M - /* Out of reset, the MCU is in LIRC8M mode. */ - /* Except when coming out of the ROM bootloader, then - * the MCU is in HIRC mode; so better set it explicitly here. */ - - /* Switching to LIRC8M mode, page 414 of the KL27Z manual. */ - - /* (1) Write 1b to MCG_C2[IRCS] to select LIRC 8M. */ - MCG->C2 |= MCG_C2_IRCS; - - /* (2) Write 1b to MCG_C1[IRCLKEN] to enable LIRC clock (optional). */ - MCG->C1 |= MCG_C1_IRCLKEN; - - /* (2) Write 01b to MCG_C1[CLKS] to select LIRC clock source. */ - MCG->C1 = (MCG->C1 & ~MCG_C1_CLKS_MASK) | MCG_C1_CLKS_LIRC; - - /* (3) Check MCG_S[CLKST] to confirm LIRC clock source is selected. */ - while( (MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_LIRC ) - ; - -#elif KINETIS_MCGLITE_MODE == KINETIS_MCGLITE_MODE_HIRC - /* Switching to HIRC mode, page 413 of the KL27Z manual. */ - - /* (1) Write 1b to MCG_MC[HIRCEN] to enable HIRC (optional). */ - MCG->MC |= MCG_MC_HIRCEN; - - /* (2) Write 00b to MCG_C1[CLKS] to select HIRC clock source. */ - MCG->C1 = (MCG->C1 & ~MCG_C1_CLKS_MASK) | MCG_C1_CLKS_HIRC; - - /* (3) Check MCG_S[CLKST] to confirm HIRC clock source is selected. */ - while( (MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_HIRC ) - ; - -#elif KINETIS_MCGLITE_MODE == KINETIS_MCGLITE_MODE_EXT - /* Assuming we have an external crystal, frequency - * specified with KINETIS_XTAL_FREQUENCY. - * - * Note: Except with 32768 kHz crystal (low-freq mode), - * external load capacitors and a feedback resistor - * are *required*. Additionally, a series resistor is - * required in the high-gain mode, and forbidden in - * the low-power mode. - * In this case, the internal caps can be configured - * via KINETIS_BOARD_OSCILLATOR_SETTING. - * (Page 420 of the KL27 manual.) */ - - /* EXTAL0 and XTAL0 */ - PORTA->PCR[18] &= ~0x01000700; /* Set PA18 to analog (default) */ - PORTA->PCR[19] &= ~0x01000700; /* Set PA19 to analog (default) */ - - /* Internal capacitors for crystal */ -#if defined(KINETIS_BOARD_OSCILLATOR_SETTING) - OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING; -#else /* KINETIS_BOARD_OSCILLATOR_SETTING */ - /* Disable the internal capacitors */ - OSC0->CR = 0; -#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */ - - /* Switching to EXT mode, page 413 of the KL27 manual. */ - - /* (1) Configure MCG_C2[EREFS0] for external clock source selection. */ - #if KINETIS_XTAL_FREQUENCY == 32768 /* low range */ - MCG->C2 = (MCG->C2 & ~MCG_C2_RANGE0_MASK) | MCG_C2_RANGE0(0); - #elif (KINETIS_XTAL_FREQUENCY >= 1000000 && \ - KINETIS_XTAL_FREQUENCY <= 8000000) /* high range */ - MCG->C2 = (MCG->C2 & ~MCG_C2_RANGE0_MASK) | MCG_C2_RANGE0(1); - #elif (KINETIS_XTAL_FREQUENCY > 8000000 && \ - KINETIS_XTAL_FREQUENCY <= 32000000) /* very high range */ - MCG->C2 = (MCG->C2 & ~MCG_C2_RANGE0_MASK) | MCG_C2_RANGE0(2); - #else /* KINETIS_XTAL_FREQUENCY == */ - #error KINETIS_XTAL_FREQUENCY not in allowed range - #endif /* KINETIS_XTAL_FREQUENCY == */ - - #if defined(KINETIS_XTAL_HIGH_GAIN) && KINETIS_XTAL_HIGH_GAIN - MCG->C2 |= MCG_C2_HGO0; - #endif /* KINETIS_XTAL_HIGH_GAIN */ - - /* Oscillator requested. */ - MCG->C2 |= MCG_C2_EREFS0; - - /* (2) Write 10b to MCG_C1[CLKS] to select external clock source. */ - MCG->C1 = (MCG->C1 & ~MCG_C1_CLKS_MASK) | MCG_C1_CLKS_EXT; - - /* (3) Check MCG_S[CLKST] to confirm external clock source is selected. */ - while( (MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_EXT ) - ; - -#else /* KINETIS_MCGLITE_MODE */ -#error Unimplemented KINETIS_MCGLITE_MODE -#endif /* KINETIS_MCGLITE_MODE */ - -#else /* KINETIS_HAS_MCG_LITE */ -/* MCU has full blown MCG */ - -#if KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEI - /* This is the default mode at reset. */ - /* The MCGOUTCLK is divided by OUTDIV1 and OUTDIV4: - * OUTDIV1 (divider for core/system and bus/flash clock) - * OUTDIV4 (additional divider for bus/flash clock) */ - SIM->CLKDIV1 = - SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1-1) | - SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4-1); - - /* Configure FEI mode */ - MCG->C4 = MCG_C4_DRST_DRS(KINETIS_MCG_FLL_DRS) | - (KINETIS_MCG_FLL_DMX32 ? MCG_C4_DMX32 : 0); - -#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEE - /* TODO: check this, for generality */ - /* - * FLL Enabled External (FEE) MCG Mode - * 24 MHz core, 12 MHz bus - using 32.768 kHz crystal with FLL. - * f_MCGOUTCLK = (f_ext / FLL_R) * F - * = (32.768 kHz ) * - * FLL_R is the reference divider selected by C1[FRDIV] - * F is the FLL factor selected by C4[DRST_DRS] and C4[DMX32]. - * - * Then the core/system and bus/flash clocks are divided: - * f_SYS = f_MCGOUTCLK / OUTDIV1 = 48 MHz / 1 = 48 MHz - * f_BUS = f_MCGOUTCLK / OUTDIV1 / OUTDIV4 = MHz / 4 = 24 MHz - */ - - SIM->SOPT2 = - SIM_SOPT2_TPMSRC(1); /* MCGFLLCLK clock or MCGPLLCLK/2 */ - /* PLLFLLSEL=0 -> MCGFLLCLK */ - - /* The MCGOUTCLK is divided by OUTDIV1 and OUTDIV4: - * OUTDIV1 (divider for core/system and bus/flash clock) - * OUTDIV4 (additional divider for bus/flash clock) */ - SIM->CLKDIV1 = - SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1 - 1) | - SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4 - 1); - - /* EXTAL0 and XTAL0 */ - PORTA->PCR[18] &= ~0x01000700; /* Set PA18 to analog (default) */ - PORTA->PCR[19] &= ~0x01000700; /* Set PA19 to analog (default) */ - - /* Internal capacitors for crystal */ -#if defined(KINETIS_BOARD_OSCILLATOR_SETTING) - OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING; -#else /* KINETIS_BOARD_OSCILLATOR_SETTING */ - /* Disable the internal capacitors */ - OSC0->CR = 0; -#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */ - - /* From KL25P80M48SF0RM section 24.5.1.1 "Initializing the MCG". */ - /* To change from FEI mode to FEE mode: */ - /* (1) Select the external clock source in C2 register. - Use low-power OSC mode (HGO0=0) which enables internal feedback - resistor, for 32.768 kHz crystal configuration. */ - MCG->C2 = - MCG_C2_RANGE0(0) | /* low frequency range (<= 40 kHz) */ - MCG_C2_EREFS0; /* external reference (using a crystal) */ - /* (2) Write to C1 to select the clock mode. */ - MCG->C1 = /* Clear the IREFS bit to switch to the external reference. */ - MCG_C1_CLKS_FLLPLL | /* Use FLL for system clock, MCGCLKOUT. */ - MCG_C1_FRDIV(0); /* Don't divide 32kHz ERCLK FLL reference. */ - MCG->C6 = 0; /* PLLS=0: Select FLL as MCG source, not PLL */ - - /* Loop until S[OSCINIT0] is 1, indicating the - crystal selected by C2[EREFS0] has been initialized. */ - while ((MCG->S & MCG_S_OSCINIT0) == 0) - ; - /* Loop until S[IREFST] is 0, indicating the - external reference is the current reference clock source. */ - while ((MCG->S & MCG_S_IREFST) != 0) - ; /* Wait until external reference clock is FLL reference. */ - /* (1)(e) Loop until S[CLKST] indicates FLL feeds MCGOUTCLK. */ - while ((MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_FLL) - ; /* Wait until FLL has been selected. */ - - /* --- MCG mode: FEE --- */ - /* Set frequency range for DCO output (MCGFLLCLK). */ - MCG->C4 = (KINETIS_MCG_FLL_DMX32 ? MCG_C4_DMX32 : 0) | - MCG_C4_DRST_DRS(KINETIS_MCG_FLL_DRS); - - /* Wait for the FLL lock time; t[fll_acquire][max] = 1 ms */ - /* TODO - not implemented - is it required? Freescale example code - seems to omit it. */ - -#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE - uint32_t ratio, frdiv; - uint32_t ratios[] = { 32, 64, 128, 256, 512, 1024, 1280, 1536 }; - uint8_t ratio_quantity = sizeof(ratios) / sizeof(ratios[0]); - uint8_t i; - - /* - * PLL Enabled External (PEE) MCG Mode - * Uses external crystal (KINETIS_XTAL_FREQUENCY) with PLL. - * f_MCGOUTCLK = (OSCCLK / PLL_R) * M - * OSCCLK = KINETIS_XTAL_FREQUENCY - * PLL_R is the reference divider selected by C5[PRDIV0] - * (OSCCLK/PLL_R must be between 2 and 4 MHz) - * M is the multiplier selected by C6[VDIV0] - * - * Running from PLL, so assuming PLLCLK = MCGOUTCLK. - * - * Then the core/system and bus/flash clocks are divided: - * f_SYS = f_MCGOUTCLK / OUTDIV1 = 96 MHz / 2 = 48 MHz - * f_BUS = f_MCGOUTCLK / OUTDIV1 / OUTDIV4 = 96 MHz / 4 = 24 MHz - */ - - /* EXTAL0 and XTAL0 */ - PORTA->PCR[18] &= ~0x01000700; /* Set PA18 to analog (default) */ - PORTA->PCR[19] &= ~0x01000700; /* Set PA19 to analog (default) */ - - /* Start in FEI mode */ - - /* Internal capacitors for crystal */ -#if defined(KINETIS_BOARD_OSCILLATOR_SETTING) - OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING; -#else /* KINETIS_BOARD_OSCILLATOR_SETTING */ - /* Disable the internal capacitors */ - OSC0->CR = 0; -#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */ - - /* From KL25P80M48SF0RM section 24.5.1.1 "Initializing the MCG". */ - /* To change from FEI mode to FBE mode: */ - /* (1) Select the external clock source in C2 register. - Use low-power OSC mode (HGO0=0) which enables internal feedback - resistor since FRDM-KL25Z has feedback resistor R25 unpopulated. - Use high-gain mode by setting C2[HGO0] instead if external - feedback resistor Rf is installed. */ - MCG->C2 = MCG_C2_EREFS0; /* external reference (using a crystal) */ - if (KINETIS_XTAL_FREQUENCY > 8000000UL) - MCG->C2 |= MCG_C2_RANGE0(2); - else - MCG->C2 |= MCG_C2_RANGE0(1); - /* (2) Write to C1 to select the clock mode. */ - frdiv = 7; - ratio = KINETIS_XTAL_FREQUENCY / 31250UL; - for (i = 0; i < ratio_quantity; ++i) { - if (ratio == ratios[i]) { - frdiv = i; - break; - } - } - - /* Switch to crystal as clock source, FLL input of 31.25 KHz */ - MCG->C1 = /* Clear the IREFS bit to switch to the external reference. */ - MCG_C1_CLKS_ERCLK | /* Use Ext Ref Clock for system clock, MCGCLKOUT. */ - MCG_C1_FRDIV(frdiv); /* Divide ERCLK / 256 for FLL reference. */ - /* Note: FLL reference frequency must be 31.25 kHz to 39.0625 kHz. */ - - MCG->C4 &= ~(MCG_C4_DMX32 | MCG_C4_DRST_DRS_MASK); - MCG->C6 = 0; /* PLLS=0: Select FLL as MCG source, not PLL */ - - /* (3) Once configuration is set, wait for MCG mode change. */ - - /* From KL25P80M48SF0RM section 24.5.31: */ - /* (1)(c) Loop until S[OSCINIT0] is 1, indicating the - crystal selected by C2[EREFS0] has been initialized. */ - while ((MCG->S & MCG_S_OSCINIT0) == 0) - ; - /* (1)(d) Loop until S[IREFST] is 0, indicating the - external reference is the current reference clock source. */ - while ((MCG->S & MCG_S_IREFST) != 0) - ; /* Wait until external reference clock is FLL reference. */ - /* (1)(e) Loop until S[CLKST] is 2'b10, indicating - the external reference clock is selected to feed MCGOUTCLK. */ - while ((MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_ERCLK) - ; /* Wait until external reference clock has been selected. */ - - /* --- MCG mode: FBE (FLL bypassed, external crystal) --- - Now the MCG is in FBE mode. - Although the FLL is bypassed, it is still on. */ - - /* (2) Then configure C5[PRDIV0] to generate the - correct PLL reference frequency. */ - #define KINETIS_PLLIN_FREQUENCY 2000000UL - /* TODO: Make sure KINETIS_XTAL_FREQUENCY >= 2Mhz && <= 50Mhz */ - /* PLL External Reference Divide by ... */ - MCG->C5 = MCG_C5_PRDIV0((KINETIS_XTAL_FREQUENCY/KINETIS_PLLIN_FREQUENCY) - 1); - /* (3) Then from FBE transition to PBE mode. */ - /* (3)(b) C6[PLLS]=1 to select PLL. */ - /* (3)(b) C6[VDIV0]= PLLIN MHz * i = PLLCLK MHz. */ - /* Config PLL output to match KINETIS_SYSCLK_FREQUENCY - * TODO: make sure KINETIS_SYSCLK_FREQUENCY is a match */ - for(i = 24; i < 56; i++) { - if(i == (KINETIS_PLLCLK_FREQUENCY/KINETIS_PLLIN_FREQUENCY)) { - /* Config PLL to match KINETIS_PLLCLK_FREQUENCY */ - MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(i-24); - break; - } - } - if(i>=56) /* Config PLL for 96 MHz output as default setting */ - MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(0); - - /* (3)(d) Loop until S[PLLST], indicating PLL - is the PLLS clock source. */ - while ((MCG->S & MCG_S_PLLST) == 0) - ; /* wait until PLL is the PLLS clock source. */ - /* (3)(e) Loop until S[LOCK0] is set, indicating the PLL has acquired lock. */ - /* PLL selected as MCG source. VDIV0=00000 (Multiply=24). */ - while ((MCG->S & MCG_S_LOCK0) == 0) - ; /* wait until PLL locked */ - - /* --- MCG mode: PBE (PLL bypassed, external crystal) --- */ - - /* Set the PLL dividers for the different clocks */ - /* The MCGOUTCLK is divided by OUTDIV1 and OUTDIV4: - * OUTDIV1 (divider for core/system and bus/flash clock) - * OUTDIV4 (additional divider for bus/flash clock) - * - these are computed in .h */ - SIM->CLKDIV1 = - SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1-1) | - SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4-1); - - SIM->SOPT2 = - SIM_SOPT2_TPMSRC(1) | /* MCGFLLCLK clock or MCGPLLCLK/2 */ - SIM_SOPT2_PLLFLLSEL; /* PLLFLLSEL=MCGPLLCLK/2 */ - - /* (4) Transition from PBE mode to PEE mode. */ - /* (4)(a) C1[CLKS] = 2'b00 to select PLL output as system clock source. */ - // Switch to PEE mode - // Select PLL output (CLKS=0) - // FLL external reference divider (FRDIV) already set - // External reference clock for FLL (IREFS=0) - MCG->C1 = MCG_C1_CLKS(0); - /* (4)(b) Loop until S[CLKST] are 2'b11, indicating the PLL output is selected for MCGOUTCLK. */ - while ((MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_PLL) - ; /* wait until clock switched to PLL output */ - - /* --- MCG mode: PEE (PLL enabled, external crystal) --- */ - -#else /* KINETIS_MCG_MODE != KINETIS_MCG_MODE_PEE */ -#error Unimplemented KINETIS_MCG_MODE -#endif /* KINETIS_MCG_MODE != KINETIS_MCG_MODE_PEE */ - -#endif /* KINETIS_HAS_MCG_LITE */ - -#endif /* !KINETIS_NO_INIT */ -} - -/** - * @brief Platform early initialization. - * @note All the involved constants come from the file @p board.h. - * @note This function is meant to be invoked early during the system - * initialization, it is usually invoked from the file - * @p board.c. - * - * @special - */ -void platform_early_init(void) { - -} - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.h deleted file mode 100644 index d16e13f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_lld.h +++ /dev/null @@ -1,316 +0,0 @@ -/* - ChibiOS - Copyright (C) 2013-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/hal_lld.h - * @brief Kinetis KL2x HAL subsystem low level driver header. - * - * @addtogroup HAL - * @{ - */ - -#ifndef HAL_LLD_H_ -#define HAL_LLD_H_ - -#include "kl2xz.h" -#include "kinetis_registry.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Defines the support for realtime counters in the HAL. - */ -#define HAL_IMPLEMENTS_COUNTERS FALSE - -/** - * @name Platform identification - * @{ - */ -#define PLATFORM_NAME "Kinetis" -/** @} */ - -#if KINETIS_HAS_MCG_LITE -/* MCU only has MCG_Lite */ - -/** - * @name Internal clock sources - * @{ - */ -#define KINETIS_HIRC 48000000 /**< High-frequency internal reference clock (USB recovery). */ -#define KINETIS_LIRC_8 8000000 /**< Low-frequency internal reference clock (faster). */ -#define KINETIS_LIRC_2 2000000 /**< Low-frequency internal reference clock (slower). */ -/** @} */ - -/** - * @name MCG modes of operation - * @{ - */ -#define KINETIS_MCGLITE_MODE_LIRC8M 1 /**< Low frequency internal reference mode (8MHz). */ -#define KINETIS_MCGLITE_MODE_LIRC2M 2 /**< Low frequency internal reference mode (2MHz). */ -#define KINETIS_MCGLITE_MODE_HIRC 3 /**< High frequency internal reference mode (with optional USB recovery). */ -#define KINETIS_MCGLITE_MODE_EXT 4 /**< External reference mode. */ -/** @} */ - -#else /* KINETIS_HAS_MCG_LITE */ -/* MCU has full blown MCG */ - -/** - * @name Internal clock sources - * @{ - */ -#define KINETIS_IRCLK_F 4000000 /**< Fast internal reference clock, factory trimmed. */ -#define KINETIS_IRCLK_S 32768 /**< Slow internal reference clock, factory trimmed. */ -/** @} */ - -/** - * @name MCG modes of operation - * @{ - */ -#define KINETIS_MCG_MODE_FEI 1 /**< FLL Engaged Internal. */ -#define KINETIS_MCG_MODE_FEE 2 /**< FLL Engaged External. */ -#define KINETIS_MCG_MODE_FBI 3 /**< FLL Bypassed Internal. */ -#define KINETIS_MCG_MODE_FBE 4 /**< FLL Bypassed External. */ -#define KINETIS_MCG_MODE_PEE 5 /**< PLL Engaged External. */ -#define KINETIS_MCG_MODE_PBE 6 /**< PLL Bypassed External. */ -#define KINETIS_MCG_MODE_BLPI 7 /**< Bypassed Low Power Internal. */ -#define KINETIS_MCG_MODE_BLPE 8 /**< Bypassed Low Power External. */ -/** @} */ - -#endif /* KINETIS_HAS_MCG_LITE */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief Disables the MCG/system clock initialization in the HAL. - */ -#if !defined(KINETIS_NO_INIT) || defined(__DOXYGEN__) -#define KINETIS_NO_INIT FALSE -#endif - -/** - * @brief MCG mode selection. - */ -#if !defined(KINETIS_MCG_MODE) || defined(__DOXYGEN__) -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#endif - -#if !defined(KINETIS_MCGLITE_MODE) || defined(__DOXYGEN__) -#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_HIRC -#endif - -/** - * @brief MCU PLL clock frequency. - */ -#if !defined(KINETIS_PLLCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#endif - -/** - * @brief Clock divider for core/system and bus/flash clocks (OUTDIV1). - * @note The allowed range is 1...16. - * @note The default value is calculated for a 48 MHz system clock - * from a 96 MHz PLL output. - */ -#if !defined(KINETIS_CLKDIV1_OUTDIV1) || defined(__DOXYGEN__) - #if defined(KINETIS_SYSCLK_FREQUENCY) && KINETIS_SYSCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV1 (KINETIS_PLLCLK_FREQUENCY/KINETIS_SYSCLK_FREQUENCY) - #else - #define KINETIS_CLKDIV1_OUTDIV1 2 - #endif -#endif - -/** - * @brief Additional clock divider bus/flash clocks (OUTDIV4). - * @note The allowed range is 1...8. - * @note This divider is on top of the OUTDIV1 divider. - * @note The default value is calculated for 24 MHz bus/flash clocks - * from a 96 MHz PLL output and 48 MHz core/system clock. - */ -#if !defined(KINETIS_CLKDIV1_OUTDIV4) || defined(__DOXYGEN__) - #if defined(KINETIS_BUSCLK_FREQUENCY) && KINETIS_BUSCLK_FREQUENCY > 0 - #define KINETIS_CLKDIV1_OUTDIV4 ((KINETIS_PLLCLK_FREQUENCY/KINETIS_CLKDIV1_OUTDIV1)/KINETIS_BUSCLK_FREQUENCY) - #else - #define KINETIS_CLKDIV1_OUTDIV4 2 - #endif -#endif - -/** - * @brief FLL DCO tuning enable for 32.768 kHz reference. - * @note Set to 1 for fine-tuning DCO for maximum frequency with - * a 32.768 kHz reference. - * @note The default value is for a 32.768 kHz external crystal. - */ -#if !defined(KINETIS_MCG_FLL_DMX32) || defined(__DOXYGEN__) -#define KINETIS_MCG_FLL_DMX32 1 -#endif - -/** - * @brief FLL DCO range selection. - * @note The allowed range is 0...3. - * @note The default value is calculated for 48 MHz FLL output - * from a 32.768 kHz external crystal. - * (DMX32 && DRST_DRS=1 => F=1464; 32.768 kHz * F ~= 48 MHz.) - * - */ -#if !defined(KINETIS_MCG_FLL_DRS) || defined(__DOXYGEN__) -#define KINETIS_MCG_FLL_DRS 2 -#endif - -/** - * @brief MCU system/core clock frequency. - */ -#if !defined(KINETIS_SYSCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_SYSCLK_FREQUENCY (KINETIS_PLLCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV1) -#endif - -/** - * @brief MCU bus/flash clock frequency. - */ -#if !defined(KINETIS_BUSCLK_FREQUENCY) || defined(__DOXYGEN__) -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif - -/** - * @brief UART0 clock frequency. - * @note The default value is based on 96 MHz PLL/2 source. - * If you use a different source, such as the FLL, - * you must set this properly. - */ -#if !defined(KINETIS_UART0_CLOCK_FREQ) || defined(__DOXYGEN__) -#define KINETIS_UART0_CLOCK_FREQ KINETIS_SYSCLK_FREQUENCY -#endif - -/** - * @brief UART0 clock source. - * @note The default value is to use PLL/2 or FLL source. - */ -#if !defined(KINETIS_UART0_CLOCK_SRC) || defined(__DOXYGEN__) -#define KINETIS_UART0_CLOCK_SRC 1 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !defined(KINETIS_SYSCLK_FREQUENCY) -#error KINETIS_SYSCLK_FREQUENCY must be defined -#endif - -#if KINETIS_SYSCLK_FREQUENCY <= 0 || KINETIS_SYSCLK_FREQUENCY > KINETIS_SYSCLK_MAX -#error KINETIS_SYSCLK_FREQUENCY out of range -#endif - -#if !defined(KINETIS_BUSCLK_FREQUENCY) -#error KINETIS_BUSCLK_FREQUENCY must be defined -#endif - -#if KINETIS_BUSCLK_FREQUENCY <= 0 || KINETIS_BUSCLK_FREQUENCY > KINETIS_BUSCLK_MAX -#error KINETIS_BUSCLK_FREQUENCY out of range -#endif - -#if KINETIS_BUSCLK_FREQUENCY > KINETIS_SYSCLK_FREQUENCY - #error KINETIS_BUSCLK_FREQUENCY must be an integer divide of\ - KINETIS_SYSCLK_FREQUENCY -#endif - - -#if !(defined(KINETIS_CLKDIV1_OUTDIV1) && \ - KINETIS_CLKDIV1_OUTDIV1 >= 1 && KINETIS_CLKDIV1_OUTDIV1 <= 16) - #error KINETIS_CLKDIV1_OUTDIV1 must be 1 through 16 -#endif - -#if !(defined(KINETIS_CLKDIV1_OUTDIV4) && \ - KINETIS_CLKDIV1_OUTDIV4 >= 1 && KINETIS_CLKDIV1_OUTDIV4 <= 16) -#error KINETIS_CLKDIV1_OUTDIV4 must be 1 through 16 -#endif - -#if !(KINETIS_MCG_FLL_DMX32 == 0 || KINETIS_MCG_FLL_DMX32 == 1) -#error Invalid KINETIS_MCG_FLL_DMX32 value, must be 0 or 1 -#endif - -#if !(0 <= KINETIS_MCG_FLL_DRS && KINETIS_MCG_FLL_DRS <= 3) -#error Invalid KINETIS_MCG_FLL_DRS value, must be 0...3 -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type representing a system clock frequency. - */ -typedef uint32_t halclock_t; - -/** - * @brief Type of the realtime free counter value. - */ -typedef uint32_t halrtcnt_t; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Returns the current value of the system free running counter. - * @note This service is implemented by returning the content of the - * DWT_CYCCNT register. - * - * @return The value of the system free running counter of - * type halrtcnt_t. - * - * @notapi - */ -#define hal_lld_get_counter_value() 0 - -/** - * @brief Realtime counter frequency. - * @note The DWT_CYCCNT register is incremented directly by the system - * clock so this function returns STM32_HCLK. - * - * @return The realtime counter frequency of type halclock_t. - * - * @notapi - */ -#define hal_lld_get_counter_frequency() 0 - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#include "nvic.h" - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); - void kl2x_clock_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.c deleted file mode 100644 index 2f56216..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Adam J. Porter - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/pwm_lld.c - * @brief KINETIS PWM subsystem low level driver source. - * - * @addtogroup PWM - * @{ - */ - -#include "hal.h" - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief PWMD1 driver identifier. - * @note The driver PWMD1 allocates the timer TPM0 when enabled. - */ -#if KINETIS_PWM_USE_TPM0 || defined(__DOXYGEN__) -PWMDriver PWMD1; -#endif - -/** - * @brief PWMD2 driver identifier. - * @note The driver PWMD2 allocates the timer TPM1 when enabled. - */ -#if KINETIS_PWM_USE_TPM1 || defined(__DOXYGEN__) -PWMDriver PWMD2; -#endif - -/** - * @brief PWMD3 driver identifier. - * @note The driver PWMD3 allocates the timer TPM2 when enabled. - */ -#if KINETIS_PWM_USE_TPM2 || defined(__DOXYGEN__) -PWMDriver PWMD3; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void pwm_lld_serve_interrupt(PWMDriver *pwmp) { - uint32_t sr; - - sr = pwmp->tpm->STATUS; - pwmp->tpm->STATUS = 0xFFFFFFFF; - - if (((sr & TPMx_STATUS_TOF) != 0) && - (pwmp->config->callback != NULL)) - pwmp->config->callback(pwmp); - if (((sr & TPMx_STATUS_CH0F) != 0) && - (pwmp->config->channels[0].callback != NULL)) - pwmp->config->channels[0].callback(pwmp); - if (((sr & TPMx_STATUS_CH1F) != 0) && - (pwmp->config->channels[1].callback != NULL)) - pwmp->config->channels[1].callback(pwmp); - if (((sr & TPMx_STATUS_CH2F) != 0) && - (pwmp->config->channels[2].callback != NULL)) - pwmp->config->channels[2].callback(pwmp); - if (((sr & TPMx_STATUS_CH3F) != 0) && - (pwmp->config->channels[3].callback != NULL)) - pwmp->config->channels[3].callback(pwmp); - if (((sr & TPMx_STATUS_CH4F) != 0) && - (pwmp->config->channels[4].callback != NULL)) - pwmp->config->channels[4].callback(pwmp); - if (((sr & TPMx_STATUS_CH5F) != 0) && - (pwmp->config->channels[5].callback != NULL)) - pwmp->config->channels[5].callback(pwmp); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if KINETIS_PWM_USE_TPM0 -/** - * @brief TPM0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_TPM0_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD1); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_PWM_USE_TPM0 */ - -#if KINETIS_PWM_USE_TPM1 -/** - * @brief TPM1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_TPM1_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD2); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_PWM_USE_TPM1 */ - -#if KINETIS_PWM_USE_TPM2 -/** - * @brief TPM2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_TPM2_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD3); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_PWM_USE_TPM2 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level PWM driver initialization. - * - * @notapi - */ -void pwm_lld_init(void) { - -#if KINETIS_PWM_USE_TPM0 - pwmObjectInit(&PWMD1); - PWMD1.channels = KINETIS_TPM0_CHANNELS; - PWMD1.tpm = TPM0; -#endif - -#if KINETIS_PWM_USE_TPM1 - pwmObjectInit(&PWMD2); - PWMD2.channels = KINETIS_TPM1_CHANNELS; - PWMD2.tpm = TPM1; -#endif - -#if KINETIS_PWM_USE_TPM2 - pwmObjectInit(&PWMD3); - PWMD3.channels = KINETIS_TPM2_CHANNELS; - PWMD3.tpm = TPM2; -#endif -} - -/** - * @brief Configures and activates the PWM peripheral. - * @note Starting a driver that is already in the @p PWM_READY state - * disables all the active channels. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_start(PWMDriver *pwmp) { - uint32_t psc; - int i; - - if (pwmp->state == PWM_STOP) { - /* Clock activation and timer reset.*/ -#if KINETIS_PWM_USE_TPM0 - if (&PWMD1 == pwmp) { - SIM->SCGC6 |= SIM_SCGC6_TPM0; - nvicEnableVector(TPM0_IRQn, KINETIS_PWM_TPM0_IRQ_PRIORITY); - } -#endif - -#if KINETIS_PWM_USE_TPM1 - if (&PWMD2 == pwmp) { - SIM->SCGC6 |= SIM_SCGC6_TPM1; - nvicEnableVector(TPM1_IRQn, KINETIS_PWM_TPM1_IRQ_PRIORITY); - } -#endif - -#if KINETIS_PWM_USE_TPM2 - if (&PWMD3 == pwmp) { - SIM->SCGC6 |= SIM_SCGC6_TPM2; - nvicEnableVector(TPM2_IRQn, KINETIS_PWM_TPM2_IRQ_PRIORITY); - } -#endif - } - - /* Disable LPTPM counter.*/ - pwmp->tpm->SC = 0; - /* Clear count register.*/ - pwmp->tpm->CNT = 0; - - /* Prescaler value calculation.*/ - psc = (KINETIS_SYSCLK_FREQUENCY / pwmp->config->frequency); - /* Prescaler must be power of two between 1 and 128.*/ - osalDbgAssert(psc <= 128 && !(psc & (psc - 1)), "invalid frequency"); - /* Prescaler register value determination. - Prescaler register value conveniently corresponds to bit position, - i.e., register value for prescaler CLK/64 is 6 ((1 << 6) == 64).*/ - for (i = 0; i < 8; i++) { - if (psc == (1UL << i)) { - break; - } - } - /* Set prescaler and clock mode. - This also sets the following: - CPWM up-counting mode - Timer overflow interrupt disabled - DMA disabled.*/ - pwmp->tpm->SC = TPMx_SC_CMOD_LPTPM_CLK | i; - /* Configure period.*/ - pwmp->tpm->MOD = pwmp->period - 1; -} - -/** - * @brief Deactivates the PWM peripheral. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_stop(PWMDriver *pwmp) { - - /* If in ready state then disables the PWM clock.*/ - if (pwmp->state == PWM_READY) { -#if KINETIS_PWM_USE_TPM0 - if (&PWMD1 == pwmp) { - SIM->SCGC6 &= ~SIM_SCGC6_TPM0; - nvicDisableVector(TPM0_IRQn); - } -#endif - -#if KINETIS_PWM_USE_TPM1 - if (&PWMD2 == pwmp) { - SIM->SCGC6 &= ~SIM_SCGC6_TPM1; - nvicDisableVector(TPM1_IRQn); - } -#endif - -#if KINETIS_PWM_USE_TPM2 - if (&PWMD3 == pwmp) { - SIM->SCGC6 &= ~SIM_SCGC6_TPM2; - nvicDisableVector(TPM2_IRQn); - } -#endif - /* Disable LPTPM counter.*/ - pwmp->tpm->SC = 0; - pwmp->tpm->MOD = 0; - } -} - - -/** - * @brief Enables a PWM channel. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is active using the specified configuration. - * @note The function has effect at the next cycle start. - * @note Channel notification is not enabled. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * @param[in] width PWM pulse width as clock pulses number - * - * @notapi - */ -void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width) { - uint32_t mode = TPMx_CnSC_MSB; /* Edge-aligned PWM mode.*/ - - switch (pwmp->config->channels[channel].mode & PWM_OUTPUT_MASK) { - case PWM_OUTPUT_ACTIVE_HIGH: - mode |= TPMx_CnSC_ELSB; - break; - case PWM_OUTPUT_ACTIVE_LOW: - mode |= TPMx_CnSC_ELSA; - break; - } - - if (pwmp->tpm->C[channel].SC & TPMx_CnSC_CHIE) - mode |= TPMx_CnSC_CHIE; - - pwmp->tpm->C[channel].SC = mode; - pwmp->tpm->C[channel].V = width; -} - -/** - * @brief Disables a PWM channel and its notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is disabled and its output line returned to the - * idle state. - * @note The function has effect at the next cycle start. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) { - - pwmp->tpm->C[channel].SC = 0; - pwmp->tpm->C[channel].V = 0; -} - -/** - * @brief Enables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) { - - pwmp->tpm->SC |= TPMx_SC_TOIE; -} - -/** - * @brief Disables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) { - - pwmp->tpm->SC &= ~TPMx_SC_TOIE; -} - -/** - * @brief Enables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) { - - pwmp->tpm->C[channel].SC |= TPMx_CnSC_CHIE; -} - -/** - * @brief Disables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) { - - pwmp->tpm->C[channel].SC &= ~TPMx_CnSC_CHIE; -} - -#endif /* HAL_USE_PWM */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.h deleted file mode 100644 index 64ff9ee..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Adam J. Porter - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/pwm_lld.h - * @brief KINETIS PWM subsystem low level driver header. - * - * @addtogroup PWM - * @{ - */ - -#ifndef HAL_PWM_LLD_H_ -#define HAL_PWM_LLD_H_ - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#if !defined(KINETIS_PWM_USE_TPM0) -#define KINETIS_PWM_USE_TPM0 FALSE -#endif -#if !defined(KINETIS_PWM_USE_TPM1) -#define KINETIS_PWM_USE_TPM1 FALSE -#endif -#if !defined(KINETIS_PWM_USE_TPM2) -#define KINETIS_PWM_USE_TPM2 FALSE -#endif - -/** - * @brief Number of PWM channels per PWM driver. - */ -#define PWM_CHANNELS 6 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief If advanced timer features switch. - * @details If set to @p TRUE the advanced features for TIM1 and TIM8 are - * enabled. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_PWM_USE_ADVANCED) || defined(__DOXYGEN__) -#define KINETIS_PWM_USE_ADVANCED FALSE -#endif - -/** - * @brief TPM0 interrupt priority level setting. - * @note The default is 2. - */ -#if !defined(KINETIS_PWM_TPM0_IRQ_PRIORITY)|| defined(__DOXYGEN__) -#define KINETIS_PWM_TPM0_IRQ_PRIORITY 2 -#endif - -/** - * @brief TPM1 interrupt priority level setting. - * @note The default is 2. - */ -#if !defined(KINETIS_PWM_TPM1_IRQ_PRIORITY)|| defined(__DOXYGEN__) -#define KINETIS_PWM_TPM1_IRQ_PRIORITY 2 -#endif - -/** - * @brief TPM2 interrupt priority level setting. - * @note The default is 2. - */ -#if !defined(KINETIS_PWM_TPM2_IRQ_PRIORITY)|| defined(__DOXYGEN__) -#define KINETIS_PWM_TPM2_IRQ_PRIORITY 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Configuration checks. */ -/*===========================================================================*/ - -#if KINETIS_PWM_USE_TPM0 && !KINETIS_HAS_TPM0 -#error "TPM0 not present in the selected device" -#endif - -#if KINETIS_PWM_USE_TPM1 && !KINETIS_HAS_TPM1 -#error "TPM1 not present in the selected device" -#endif - -#if KINETIS_PWM_USE_TPM2 && !KINETIS_HAS_TPM2 -#error "TPM2 not present in the selected device" -#endif - -#if !KINETIS_PWM_USE_TPM0 && !KINETIS_PWM_USE_TPM1 && !KINETIS_PWM_USE_TPM2 -#error "PWM driver activated but no TPM peripheral assigned" -#endif - -#if KINETIS_PWM_USE_TPM0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_PWM_TPM0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to KINETIS_PWM_TPM0_IRQ_PRIORITY" -#endif - -#if KINETIS_PWM_USE_TPM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_PWM_TPM1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to KINETIS_PWM_TPM1_IRQ_PRIORITY" -#endif - -#if KINETIS_PWM_USE_TPM2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_PWM_TPM2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to KINETIS_PWM_TPM2_IRQ_PRIORITY" -#endif - -#if !defined(KINETIS_TPM0_IRQ_VECTOR) -#error "KINETIS_TPM0_IRQ_VECTOR not defined" -#endif - -#if !defined(KINETIS_TPM1_IRQ_VECTOR) -#error "KINETIS_TPM1_IRQ_VECTOR not defined" -#endif - -#if !defined(KINETIS_TPM2_IRQ_VECTOR) -#error "KINETIS_TPM2_IRQ_VECTOR not defined" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a PWM mode. - */ -typedef uint32_t pwmmode_t; - -/** - * @brief Type of a PWM channel. - */ -typedef uint8_t pwmchannel_t; - -/** - * @brief Type of a channels mask. - */ -typedef uint32_t pwmchnmsk_t; - -/** - * @brief Type of a PWM counter. - */ -typedef uint16_t pwmcnt_t; - -/** - * @brief Type of a PWM driver channel configuration structure. - */ -typedef struct { - /** - * @brief Channel active logic level. - */ - pwmmode_t mode; - /** - * @brief Channel callback pointer. - * @note This callback is invoked on the channel compare event. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /* End of the mandatory fields.*/ -} PWMChannelConfig; - -/** - * @brief Type of a PWM driver configuration structure. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - uint32_t frequency; - /** - * @brief PWM period in ticks. - * @note The low level can use assertions in order to catch invalid - * period specifications. - */ - pwmcnt_t period; - /** - * @brief Periodic callback pointer. - * @note This callback is invoked on PWM counter reset. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /** - * @brief Channels configurations. - */ - PWMChannelConfig channels[PWM_CHANNELS]; - /* End of the mandatory fields.*/ -} PWMConfig; - -/** - * @brief Structure representing a PWM driver. - */ -struct PWMDriver { - /** - * @brief Driver state. - */ - pwmstate_t state; - /** - * @brief Current driver configuration data. - */ - const PWMConfig *config; - /** - * @brief Current PWM period in ticks. - */ - pwmcnt_t period; - /** - * @brief Mask of the enabled channels. - */ - pwmchnmsk_t enabled; - /** - * @brief Number of channels in this instance. - */ - pwmchannel_t channels; -#if defined(PWM_DRIVER_EXT_FIELDS) - PWM_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the TPM registers block. - */ - TPM_TypeDef *tpm; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the period the PWM peripheral. - * @details This function changes the period of a PWM unit that has already - * been activated using @p pwmStart(). - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The PWM unit period is changed to the new value. - * @note The function has effect at the next cycle start. - * @note If a period is specified that is shorter than the pulse width - * programmed in one of the channels then the behavior is not - * guaranteed. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] period new cycle time in ticks - * - * @notapi - */ -#define pwm_lld_change_period(pwmp, period) \ - ((pwmp)->tpm->MOD = ((period) - 1)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_PWM_USE_TPM0 || defined(__DOXYGEN__) -extern PWMDriver PWMD1; -#endif -#if KINETIS_PWM_USE_TPM1 || defined(__DOXYGEN__) -extern PWMDriver PWMD2; -#endif -#if KINETIS_PWM_USE_TPM2 || defined(__DOXYGEN__) -extern PWMDriver PWMD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void pwm_lld_init(void); - void pwm_lld_start(PWMDriver *pwmp); - void pwm_lld_stop(PWMDriver *pwmp); - void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width); - void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel); - void pwm_lld_enable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_disable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); - void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PWM */ - -#endif /* HAL_PWM_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/kinetis_registry.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/kinetis_registry.h deleted file mode 100644 index 49b1ec8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/kinetis_registry.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - (C) 2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/kinetis_registry.h - * @brief KL2x capabilities registry. - * - * @addtogroup HAL - * @{ - */ - -#ifndef KINETIS_REGISTRY_H_ -#define KINETIS_REGISTRY_H_ - -#if !defined(KL2x) || defined(__DOXYGEN__) -#define KL2x -#endif - -/*===========================================================================*/ -/* Platform capabilities. */ -/*===========================================================================*/ - -/** - * @name KL2x capabilities - * @{ - */ - -/*===========================================================================*/ -/* Common features */ -/*===========================================================================*/ - -/** - * @brief Maximum system and core clock (f_SYS) frequency. - */ -#define KINETIS_SYSCLK_MAX 48000000 - -/** - * @brief Maximum bus clock (f_BUS) frequency. - */ -#define KINETIS_BUSCLK_MAX 24000000 - -/* ADC attributes.*/ -#define KINETIS_HAS_ADC0 TRUE -#define KINETIS_ADC0_IRQ_VECTOR Vector7C -#define KINETIS_HAS_ADC1 FALSE - -/* DMA attributes.*/ -#define KINETIS_DMA0_IRQ_VECTOR Vector40 -#define KINETIS_DMA1_IRQ_VECTOR Vector44 -#define KINETIS_DMA2_IRQ_VECTOR Vector48 -#define KINETIS_DMA3_IRQ_VECTOR Vector4C -#define KINETIS_HAS_DMA_ERROR_IRQ FALSE - -/* GPT attributes.*/ -#define KINETIS_PIT_IRQ_VECTOR Vector98 -#define KINETIS_HAS_PIT_COMMON_IRQ TRUE -#define KINETIS_HAS_PIT0 TRUE -#define KINETIS_HAS_PIT1 TRUE -#define KINETIS_HAS_PIT2 FALSE -#define KINETIS_HAS_PIT3 FALSE - -/* I2C attributes.*/ -#define KINETIS_HAS_I2C0 TRUE -#define KINETIS_I2C0_IRQ_VECTOR Vector60 -#define KINETIS_HAS_I2C1 TRUE -#define KINETIS_I2C1_IRQ_VECTOR Vector64 - -/* Serial attributes */ -#define KINETIS_HAS_SERIAL0 TRUE -#define KINETIS_SERIAL0_IRQ_VECTOR Vector70 -#define KINETIS_HAS_SERIAL1 TRUE -#define KINETIS_SERIAL1_IRQ_VECTOR Vector74 -#define KINETIS_HAS_SERIAL2 TRUE -#define KINETIS_SERIAL2_IRQ_VECTOR Vector78 -#define KINETIS_HAS_SERIAL_ERROR_IRQ FALSE - -/* SPI attributes.*/ -#define KINETIS_HAS_SPI0 TRUE -#define KINETIS_SPI0_IRQ_VECTOR Vector68 -#define KINETIS_HAS_SPI1 TRUE -#define KINETIS_SPI1_IRQ_VECTOR Vector6C - -/* TPM attributes.*/ -#define KINETIS_HAS_TPM0 TRUE -#define KINETIS_TPM0_CHANNELS 6 -#define KINETIS_TPM0_IRQ_VECTOR Vector84 -#define KINETIS_HAS_TPM1 TRUE -#define KINETIS_TPM1_CHANNELS 2 -#define KINETIS_TPM1_IRQ_VECTOR Vector88 -#define KINETIS_HAS_TPM2 TRUE -#define KINETIS_TPM2_CHANNELS 2 -#define KINETIS_TPM2_IRQ_VECTOR Vector8C - -/* USB attributes.*/ -#define KINETIS_HAS_USB TRUE -#define KINETIS_USB_IRQ_VECTOR VectorA0 - -/* FTFA attributes.*/ -#define KINETIS_FTFA_IRQ_VECTOR Vector54 - -/* LPTMR attributes */ -#define KINETIS_LPTMR0_IRQ_VECTOR VectorB0 - -/*===========================================================================*/ -/* KL25 */ -/*===========================================================================*/ -#if defined(KL25) || defined(__DOXYGEN__) - -/* DAC attributes.*/ -#define KINETIS_HAS_DAC0 TRUE -#define KINTEIS_DAC0_IRQ_VECTOR VectorA4 - -/* EXT attributes.*/ -#define KINETIS_PORTA_IRQ_VECTOR VectorB8 -#define KINETIS_PORTD_IRQ_VECTOR VectorBC -#define KINETIS_EXT_HAS_COMMON_CD_IRQ FALSE -#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE -#define KINETIS_GPIO_HAS_OPENDRAIN FALSE - -/* I2S attributes.*/ -#define KINETIS_HAS_I2S0 FALSE - -/* MCG attributes.*/ -#define KINETIS_HAS_MCG_LITE FALSE - -/* Serial attributes */ -#define KINETIS_SERIAL0_IS_UARTLP TRUE -#define KINETIS_SERIAL0_IS_LPUART FALSE -#define KINETIS_SERIAL1_IS_LPUART FALSE - -/* USB attributes.*/ -#define KINETIS_USB0_IS_USBOTG TRUE -#define KINETIS_HAS_USB_CLOCK_RECOVERY FALSE - -/*===========================================================================*/ -/* KL26 */ -/*===========================================================================*/ -#elif defined(KL26) /* defined(KL25) */ - -/* DAC attributes.*/ -#define KINETIS_HAS_DAC0 TRUE -#define KINTEIS_DAC0_IRQ_VECTOR VectorA4 - -/* EXT attributes.*/ -#define KINETIS_PORTA_IRQ_VECTOR VectorB8 -/* Common IRQ vector for PORTC and PORTD */ -#define KINETIS_PORTD_IRQ_VECTOR VectorBC -#define KINETIS_EXT_HAS_COMMON_CD_IRQ TRUE -#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE -#define KINETIS_GPIO_HAS_OPENDRAIN FALSE - -/* I2S attributes.*/ -#define KINETIS_HAS_I2S0 TRUE -#define KINETIS_I2S0_IRQ_VECTOR Vector9C - -/* MCG attributes.*/ -#define KINETIS_HAS_MCG_LITE FALSE - -/* Serial attributes */ -#define KINETIS_SERIAL0_IS_UARTLP TRUE -#define KINETIS_SERIAL0_IS_LPUART FALSE -#define KINETIS_SERIAL1_IS_LPUART FALSE - -/* USB attributes.*/ -#define KINETIS_USB0_IS_USBOTG TRUE -#define KINETIS_HAS_USB_CLOCK_RECOVERY FALSE - -/*===========================================================================*/ -/* KL27 */ -/*===========================================================================*/ -#elif defined(KL27Zxxx) || defined(KL27Zxx) /* defined(KL26) */ - -#if !defined(KL27) -#define KL27 -#endif - -/* MCG attributes.*/ -#define KINETIS_HAS_MCG_LITE TRUE - -/* Note: on this device, SERIAL2 IRQ is alternatively FlexIO IRQ. */ -/* Serial attributes */ -#define KINETIS_SERIAL0_IS_UARTLP FALSE -#define KINETIS_SERIAL0_IS_LPUART TRUE -#define KINETIS_SERIAL1_IS_LPUART TRUE - -/* USB attributes.*/ -#define KINETIS_USB0_IS_USBOTG FALSE -#define KINETIS_HAS_USB_CLOCK_RECOVERY TRUE - -/*===========================================================================*/ -/* KL27Zxxx (MKL27Z128* and MKL27Z256*) specific */ -/*===========================================================================*/ -#if defined(KL27Zxxx) - -/* DAC attributes.*/ -#define KINETIS_HAS_DAC0 TRUE -#define KINTEIS_DAC0_IRQ_VECTOR VectorA4 - -/* EXT attributes.*/ -#define KINETIS_PORTA_IRQ_VECTOR VectorB8 -/* Common IRQ vector for PORTC and PORTD */ -#define KINETIS_PORTD_IRQ_VECTOR VectorBC -#define KINETIS_EXT_HAS_COMMON_CD_IRQ TRUE -#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE -#define KINETIS_GPIO_HAS_OPENDRAIN FALSE - -/* I2S attributes.*/ -#define KINETIS_HAS_I2S0 TRUE -#define KINETIS_I2S0_IRQ_VECTOR Vector9C - -/*===========================================================================*/ -/* KL27Zxx (MKL27Z32* and MKL27Z264*) specific */ -/*===========================================================================*/ -#elif defined(KL27Zxx) /* defined(KL27Zxxx) */ - -/* Has CRC module */ -/* Does not have USB voltage regulator */ -/* Does have KEEP_ALIVE USB feature */ - -/* DAC attributes.*/ -#define KINETIS_HAS_DAC0 FALSE - -/* EXT attributes.*/ -#define KINETIS_PORTA_IRQ_VECTOR VectorB8 -/* Common IRQ vector for PORTB to PORTE */ -#define KINETIS_PORTD_IRQ_VECTOR VectorBC -#define KINETIS_EXT_HAS_COMMON_CD_IRQ FALSE -#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ TRUE -#define KINETIS_GPIO_HAS_OPENDRAIN FALSE - -/* I2S attributes.*/ -#define KINETIS_HAS_I2S0 FALSE - -#endif /* defined(KL27Zxx) */ - -#else /* ! (KL25 || KL26 || KL27) */ -#error MCU type not described in kinetis_registry -#endif /* KL2Y */ - -/** @} */ - -#endif /* KINETIS_REGISTRY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/platform.mk deleted file mode 100644 index dda7a6d..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/KL2x/platform.mk +++ /dev/null @@ -1,17 +0,0 @@ -# List of all platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_adc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/hal_pwm_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/hal_usb_lld.c - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x \ - ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.c deleted file mode 100644 index 56ae4c3..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/adc_lld.c - * @brief KINETIS ADC subsystem low level driver source. - * - * @addtogroup ADC - * @{ - */ - -#include "hal.h" - -#if HAL_USE_ADC || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define ADC_CHANNEL_MASK 0x1f - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief ADC1 driver identifier.*/ -#if KINETIS_ADC_USE_ADC0 || defined(__DOXYGEN__) -ADCDriver ADCD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void calibrate(ADCDriver *adcp) { - - /* Clock Divide by 8, Use Bus Clock Div 2 */ - /* At 48MHz this results in ADCCLK of 48/8/2 == 3MHz */ - adcp->adc->CFG1 = ADCx_CFG1_ADIV(ADCx_CFG1_ADIV_DIV_8) | - ADCx_CFG1_ADICLK(ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2); - - /* Use software trigger and disable DMA etc. */ - adcp->adc->SC2 = 0; - - /* Enable Hardware Average, Average 32 Samples, Calibrate */ - adcp->adc->SC3 = ADCx_SC3_AVGE | - ADCx_SC3_AVGS(ADCx_SC3_AVGS_AVERAGE_32_SAMPLES) | - ADCx_SC3_CAL; - - /* FIXME: May take several ms. Use an interrupt instead of busy wait */ - /* Wait for calibration completion */ - while (!(adcp->adc->SC1A & ADCx_SC1n_COCO)) - ; - - uint16_t gain = ((adcp->adc->CLP0 + adcp->adc->CLP1 + adcp->adc->CLP2 + - adcp->adc->CLP3 + adcp->adc->CLP4 + adcp->adc->CLPS) / 2) | 0x8000; - adcp->adc->PG = gain; - - gain = ((adcp->adc->CLM0 + adcp->adc->CLM1 + adcp->adc->CLM2 + - adcp->adc->CLM3 + adcp->adc->CLM4 + adcp->adc->CLMS) / 2) | 0x8000; - adcp->adc->MG = gain; - -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if KINETIS_ADC_USE_ADC0 || defined(__DOXYGEN__) -/** - * @brief ADC interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_ADC0_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - ADCDriver *adcp = &ADCD1; - - /* Disable Interrupt, Disable Channel */ - adcp->adc->SC1A = ADCx_SC1n_ADCH(ADCx_SC1n_ADCH_DISABLED); - - /* Read the sample into the buffer */ - adcp->samples[adcp->current_index++] = adcp->adc->RA; - - bool more = true; - - /* At the end of the buffer then we may be finished */ - if (adcp->current_index == adcp->number_of_samples) { - /* We are never finished in circular mode */ - more = ADCD1.grpp->circular; - - _adc_isr_full_code(&ADCD1); - - adcp->current_index = 0; - - } - - if (more) { - - /* Signal half completion in circular mode. */ - if (ADCD1.grpp->circular && - (adcp->current_index == (adcp->number_of_samples / 2))) { - - _adc_isr_half_code(&ADCD1); - } - - /* Skip to the next channel */ - do { - adcp->current_channel = (adcp->current_channel + 1) & ADC_CHANNEL_MASK; - } while (((1 << adcp->current_channel) & adcp->grpp->channel_mask) == 0); - - /* Enable Interrupt, Select the Channel */ - adcp->adc->SC1A = ADCx_SC1n_AIEN | ADCx_SC1n_ADCH(adcp->current_channel); - } - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level ADC driver initialization. - * - * @notapi - */ -void adc_lld_init(void) { - -#if KINETIS_ADC_USE_ADC0 - /* Driver initialization.*/ - adcObjectInit(&ADCD1); -#endif - - /* The shared vector is initialized on driver initialization and never - disabled.*/ - nvicEnableVector(ADC0_IRQn, KINETIS_ADC_IRQ_PRIORITY); -} - -/** - * @brief Configures and activates the ADC peripheral. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_start(ADCDriver *adcp) { - - /* If in stopped state then enables the ADC clock.*/ - if (adcp->state == ADC_STOP) { - SIM->SCGC6 |= SIM_SCGC6_ADC0; - -#if KINETIS_ADC_USE_ADC0 - if (&ADCD1 == adcp) { - adcp->adc = ADC0; - if (adcp->config->calibrate) { - calibrate(adcp); - } - } -#endif /* KINETIS_ADC_USE_ADC0 */ - } -} - -/** - * @brief Deactivates the ADC peripheral. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_stop(ADCDriver *adcp) { - - /* If in ready state then disables the ADC clock.*/ - if (adcp->state == ADC_READY) { - SIM->SCGC6 &= ~SIM_SCGC6_ADC0; - -#if KINETIS_ADC_USE_ADC0 - if (&ADCD1 == adcp) { - /* Disable Interrupt, Disable Channel */ - adcp->adc->SC1A = ADCx_SC1n_ADCH(ADCx_SC1n_ADCH_DISABLED); - } -#endif - } -} - -/** - * @brief Starts an ADC conversion. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_start_conversion(ADCDriver *adcp) { - const ADCConversionGroup *grpp = adcp->grpp; - - /* Enable the Bandgap Buffer if channel mask includes BANDGAP */ - if (grpp->channel_mask & ADC_BANDGAP) { - PMC->REGSC |= PMC_REGSC_BGBE; - } - - adcp->number_of_samples = adcp->depth * grpp->num_channels; - adcp->current_index = 0; - - /* Skip to the next channel */ - adcp->current_channel = 0; - while (((1 << adcp->current_channel) & grpp->channel_mask) == 0) { - adcp->current_channel = (adcp->current_channel + 1) & ADC_CHANNEL_MASK; - } - - /* Set clock speed and conversion size */ - adcp->adc->CFG1 = grpp->cfg1; - - /* Set averaging */ - adcp->adc->SC3 = grpp->sc3; - - /* Enable Interrupt, Select Channel */ - adcp->adc->SC1A = ADCx_SC1n_AIEN | ADCx_SC1n_ADCH(adcp->current_channel); -} - -/** - * @brief Stops an ongoing conversion. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_stop_conversion(ADCDriver *adcp) { - const ADCConversionGroup *grpp = adcp->grpp; - - /* Disable the Bandgap buffer if channel mask includes BANDGAP */ - if (grpp->channel_mask & ADC_BANDGAP) { - /* Clear BGBE, ACKISO is w1c, avoid setting */ - PMC->REGSC &= ~(PMC_REGSC_BGBE | PMC_REGSC_ACKISO); - } - -} - -#endif /* HAL_USE_ADC */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.h deleted file mode 100644 index c4edbd6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_adc_lld.h +++ /dev/null @@ -1,360 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/adc_lld.h - * @brief KINETIS ADC subsystem low level driver header. - * - * @addtogroup ADC - * @{ - */ - -#ifndef HAL_ADC_LLD_H_ -#define HAL_ADC_LLD_H_ - -#if HAL_USE_ADC || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name Absolute Maximum Ratings - * @{ - */ -/** - * @brief Minimum ADC clock frequency. - */ -#define KINETIS_ADCCLK_MIN 600000 - -/** - * @brief Maximum ADC clock frequency. - */ -#define KINETIS_ADCCLK_MAX 36000000 - -#define ADCx_SC3_AVGS_AVERAGE_4_SAMPLES 0 -#define ADCx_SC3_AVGS_AVERAGE_8_SAMPLES 1 -#define ADCx_SC3_AVGS_AVERAGE_16_SAMPLES 2 -#define ADCx_SC3_AVGS_AVERAGE_32_SAMPLES 3 - -#define ADCx_CFG1_ADIV_DIV_1 0 -#define ADCx_CFG1_ADIV_DIV_2 1 -#define ADCx_CFG1_ADIV_DIV_4 2 -#define ADCx_CFG1_ADIV_DIV_8 3 - -#define ADCx_CFG1_ADIVCLK_BUS_CLOCK 0 -#define ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2 1 -#define ADCx_CFG1_ADIVCLK_BUS_ALTCLK 2 -#define ADCx_CFG1_ADIVCLK_BUS_ADACK 3 - -#define ADCx_CFG1_MODE_8_OR_9_BITS 0 -#define ADCx_CFG1_MODE_12_OR_13_BITS 1 -#define ADCx_CFG1_MODE_10_OR_11_BITS 2 -#define ADCx_CFG1_MODE_16_BITS 3 - -#define ADCx_SC1n_ADCH_DAD0 0 -#define ADCx_SC1n_ADCH_DAD1 1 -#define ADCx_SC1n_ADCH_DAD2 2 -#define ADCx_SC1n_ADCH_DAD3 3 -#define ADCx_SC1n_ADCH_DADP0 0 -#define ADCx_SC1n_ADCH_DADP1 1 -#define ADCx_SC1n_ADCH_DADP2 2 -#define ADCx_SC1n_ADCH_DADP3 3 -#define ADCx_SC1n_ADCH_AD4 4 -#define ADCx_SC1n_ADCH_AD5 5 -#define ADCx_SC1n_ADCH_AD6 6 -#define ADCx_SC1n_ADCH_AD7 7 -#define ADCx_SC1n_ADCH_AD8 8 -#define ADCx_SC1n_ADCH_AD9 9 -#define ADCx_SC1n_ADCH_AD10 10 -#define ADCx_SC1n_ADCH_AD11 11 -#define ADCx_SC1n_ADCH_AD12 12 -#define ADCx_SC1n_ADCH_AD13 13 -#define ADCx_SC1n_ADCH_AD14 14 -#define ADCx_SC1n_ADCH_AD15 15 -#define ADCx_SC1n_ADCH_AD16 16 -#define ADCx_SC1n_ADCH_AD17 17 -#define ADCx_SC1n_ADCH_AD18 18 -#define ADCx_SC1n_ADCH_AD19 19 -#define ADCx_SC1n_ADCH_AD20 20 -#define ADCx_SC1n_ADCH_AD21 21 -#define ADCx_SC1n_ADCH_AD22 22 -#define ADCx_SC1n_ADCH_AD23 23 -#define ADCx_SC1n_ADCH_TEMP_SENSOR 26 -#define ADCx_SC1n_ADCH_BANDGAP 27 -#define ADCx_SC1n_ADCH_VREFSH 29 -#define ADCx_SC1n_ADCH_VREFSL 30 -#define ADCx_SC1n_ADCH_DISABLED 31 - -#define ADC_DAD0 (1 << ADCx_SC1n_ADCH_DAD0) -#define ADC_DAD1 (1 << ADCx_SC1n_ADCH_DAD1) -#define ADC_DAD2 (1 << ADCx_SC1n_ADCH_DAD2) -#define ADC_DAD3 (1 << ADCx_SC1n_ADCH_DAD3) -#define ADC_DADP0 (1 << ADCx_SC1n_ADCH_DADP0) -#define ADC_DADP1 (1 << ADCx_SC1n_ADCH_DADP1) -#define ADC_DADP2 (1 << ADCx_SC1n_ADCH_DADP2) -#define ADC_DADP3 (1 << ADCx_SC1n_ADCH_DADP3) -#define ADC_AD4 (1 << ADCx_SC1n_ADCH_AD4) -#define ADC_AD5 (1 << ADCx_SC1n_ADCH_AD5) -#define ADC_AD6 (1 << ADCx_SC1n_ADCH_AD6) -#define ADC_AD7 (1 << ADCx_SC1n_ADCH_AD7) -#define ADC_AD8 (1 << ADCx_SC1n_ADCH_AD8) -#define ADC_AD9 (1 << ADCx_SC1n_ADCH_AD9) -#define ADC_AD10 (1 << ADCx_SC1n_ADCH_AD10) -#define ADC_AD11 (1 << ADCx_SC1n_ADCH_AD11) -#define ADC_AD12 (1 << ADCx_SC1n_ADCH_AD12) -#define ADC_AD13 (1 << ADCx_SC1n_ADCH_AD13) -#define ADC_AD14 (1 << ADCx_SC1n_ADCH_AD14) -#define ADC_AD15 (1 << ADCx_SC1n_ADCH_AD15) -#define ADC_AD16 (1 << ADCx_SC1n_ADCH_AD16) -#define ADC_AD17 (1 << ADCx_SC1n_ADCH_AD17) -#define ADC_AD18 (1 << ADCx_SC1n_ADCH_AD18) -#define ADC_AD19 (1 << ADCx_SC1n_ADCH_AD19) -#define ADC_AD20 (1 << ADCx_SC1n_ADCH_AD20) -#define ADC_AD21 (1 << ADCx_SC1n_ADCH_AD21) -#define ADC_AD22 (1 << ADCx_SC1n_ADCH_AD22) -#define ADC_AD23 (1 << ADCx_SC1n_ADCH_AD23) -#define ADC_TEMP_SENSOR (1 << ADCx_SC1n_ADCH_TEMP_SENSOR) -#define ADC_BANDGAP (1 << ADCx_SC1n_ADCH_BANDGAP) -#define ADC_VREFSH (1 << ADCx_SC1n_ADCH_VREFSH) -#define ADC_VREFSL (1 << ADCx_SC1n_ADCH_VREFSL) -#define ADC_DISABLED (1 << ADCx_SC1n_ADCH_DISABLED) - -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief ADC1 driver enable switch. - * @details If set to @p TRUE the support for ADC1 is included. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_ADC_USE_ADC0) || defined(__DOXYGEN__) -#define KINETIS_ADC_USE_ADC0 FALSE -#endif - -/** - * @brief ADC interrupt priority level setting. - */ -#if !defined(KINETIS_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_ADC_IRQ_PRIORITY 5 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if KINETIS_ADC_USE_ADC0 && !KINETIS_HAS_ADC0 -#error "ADC1 not present in the selected device" -#endif - -#if !KINETIS_ADC_USE_ADC0 -#error "ADC driver activated but no ADC peripheral assigned" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief ADC sample data type. - */ -typedef uint16_t adcsample_t; - -/** - * @brief Channels number in a conversion group. - */ -typedef uint16_t adc_channels_num_t; - -/** - * @brief Possible ADC failure causes. - * @note Error codes are architecture dependent and should not relied - * upon. - */ -typedef enum { - ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */ - ADC_ERR_OVERFLOW = 1 /**< ADC overflow condition. */ -} adcerror_t; - -/** - * @brief Type of a structure representing an ADC driver. - */ -typedef struct ADCDriver ADCDriver; - -/** - * @brief ADC notification callback type. - * - * @param[in] adcp pointer to the @p ADCDriver object triggering the - * callback - * @param[in] buffer pointer to the most recent samples data - * @param[in] n number of buffer rows available starting from @p buffer - */ -typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n); - -/** - * @brief ADC error callback type. - * - * @param[in] adcp pointer to the @p ADCDriver object triggering the - * callback - * @param[in] err ADC error code - */ -typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err); - -/** - * @brief Conversion group configuration structure. - * @details This implementation-dependent structure describes a conversion - * operation. - */ -typedef struct { - /** - * @brief Enables the circular buffer mode for the group. - */ - bool circular; - /** - * @brief Number of the analog channels belonging to the conversion group. - */ - adc_channels_num_t num_channels; - /** - * @brief Callback function associated to the group or @p NULL. - */ - adccallback_t end_cb; - /** - * @brief Error callback or @p NULL. - */ - adcerrorcallback_t error_cb; - /* End of the mandatory fields.*/ - /** - * @brief Bitmask of channels for ADC conversion. - */ - uint32_t channel_mask; - /** - * @brief ADC CFG1 register initialization data. - * @note All the required bits must be defined into this field. - */ - uint32_t cfg1; - /** - * @brief ADC SC3 register initialization data. - * @note All the required bits must be defined into this field. - */ - uint32_t sc3; -} ADCConversionGroup; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /* Perform first time calibration */ - bool calibrate; -} ADCConfig; - -/** - * @brief Structure representing an ADC driver. - */ -struct ADCDriver { - /** - * @brief Driver state. - */ - adcstate_t state; - /** - * @brief Current configuration data. - */ - const ADCConfig *config; - /** - * @brief Current samples buffer pointer or @p NULL. - */ - adcsample_t *samples; - /** - * @brief Current samples buffer depth or @p 0. - */ - size_t depth; - /** - * @brief Current conversion group pointer or @p NULL. - */ - const ADCConversionGroup *grpp; -#if ADC_USE_WAIT || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif -#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif /* ADC_USE_MUTUAL_EXCLUSION */ -#if defined(ADC_DRIVER_EXT_FIELDS) - ADC_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the ADCx registers block. - */ - ADC_TypeDef *adc; - /** - * @brief Number of samples expected. - */ - size_t number_of_samples; - /** - * @brief Current position in the buffer. - */ - size_t current_index; - /** - * @brief Current channel index into group channel_mask. - */ - size_t current_channel; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_ADC_USE_ADC0 && !defined(__DOXYGEN__) -extern ADCDriver ADCD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void adc_lld_init(void); - void adc_lld_start(ADCDriver *adcp); - void adc_lld_stop(ADCDriver *adcp); - void adc_lld_start_conversion(ADCDriver *adcp); - void adc_lld_stop_conversion(ADCDriver *adcp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_ADC */ - -#endif /* HAL_ADC_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.c deleted file mode 100644 index 21bb6e0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/ext_lld.c - * @brief KINETIS EXT subsystem low level driver source. - * - * @addtogroup EXT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define PCR_IRQC_DISABLED 0x0 -#define PCR_IRQC_DMA_RISING_EDGE 0x1 -#define PCR_IRQC_DMA_FALLING_EDGE 0x2 -#define PCR_IRQC_DMA_EITHER_EDGE 0x3 - -#define PCR_IRQC_LOGIC_ZERO 0x8 -#define PCR_IRQC_RISING_EDGE 0x9 -#define PCR_IRQC_FALLING_EDGE 0xA -#define PCR_IRQC_EITHER_EDGE 0xB -#define PCR_IRQC_LOGIC_ONE 0xC - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief EXTD1 driver identifier. - */ -EXTDriver EXTD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/* A channel map for each channel. - * - * The index is the pin number. - * The result is the channel for that pin. - */ -#if KINETIS_EXT_PORTA_WIDTH > 0 -uint8_t porta_channel_map[KINETIS_EXT_PORTA_WIDTH]; -#endif -#if KINETIS_EXT_PORTB_WIDTH > 0 -uint8_t portb_channel_map[KINETIS_EXT_PORTB_WIDTH]; -#endif -#if KINETIS_EXT_PORTC_WIDTH > 0 -uint8_t portc_channel_map[KINETIS_EXT_PORTC_WIDTH]; -#endif -#if KINETIS_EXT_PORTD_WIDTH > 0 -uint8_t portd_channel_map[KINETIS_EXT_PORTD_WIDTH]; -#endif -#if KINETIS_EXT_PORTE_WIDTH > 0 -uint8_t porte_channel_map[KINETIS_EXT_PORTE_WIDTH]; -#endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Enables EXTI IRQ sources. - * - * @notapi - */ -static void ext_lld_exti_irq_enable(void) { - -#if KINETIS_EXT_PORTA_WIDTH > 0 - nvicEnableVector(PINA_IRQn, KINETIS_EXT_PORTA_IRQ_PRIORITY); -#endif - -#if KINETIS_EXT_HAS_COMMON_BCDE_IRQ -#if (KINETIS_EXT_PORTB_WIDTH > 0) || (KINETIS_EXT_PORTC_WIDTH > 0) \ - || (KINETIS_EXT_PORTD_WIDTH > 0) || (KINETIS_EXT_PORTE_WIDTH > 0) - nvicEnableVector(PINBCDE_IRQn, KINETIS_EXT_PORTD_IRQ_PRIORITY); -#endif - -#elif KINETIS_EXT_HAS_COMMON_CD_IRQ /* KINETIS_EXT_HAS_COMMON_BCDE_IRQ */ -#if (KINETIS_EXT_PORTC_WIDTH > 0) || (KINETIS_EXT_PORTD_WIDTH > 0) - nvicEnableVector(PINCD_IRQn, KINETIS_EXT_PORTD_IRQ_PRIORITY); -#endif - -#else /* KINETIS_EXT_HAS_COMMON_CD_IRQ */ -#if KINETIS_EXT_PORTB_WIDTH > 0 - nvicEnableVector(PINB_IRQn, KINETIS_EXT_PORTB_IRQ_PRIORITY); -#endif -#if KINETIS_EXT_PORTC_WIDTH > 0 - nvicEnableVector(PINC_IRQn, KINETIS_EXT_PORTC_IRQ_PRIORITY); -#endif -#if KINETIS_EXT_PORTD_WIDTH > 0 - nvicEnableVector(PIND_IRQn, KINETIS_EXT_PORTD_IRQ_PRIORITY); -#endif -#if KINETIS_EXT_PORTE_WIDTH > 0 - nvicEnableVector(PINE_IRQn, KINETIS_EXT_PORTE_IRQ_PRIORITY); -#endif -#endif /* !KINETIS_EXT_HAS_COMMON_CD_IRQ */ -} - -/** - * @brief Disables EXTI IRQ sources. - * - * @notapi - */ -static void ext_lld_exti_irq_disable(void) { - -#if KINETIS_EXT_PORTA_WIDTH > 0 - nvicDisableVector(PINA_IRQn); -#endif - -#if KINETIS_EXT_HAS_COMMON_BCDE_IRQ -#if (KINETIS_EXT_PORTB_WIDTH > 0) || (KINETIS_EXT_PORTC_WIDTH > 0) \ - || (KINETIS_EXT_PORTD_WIDTH > 0) || (KINETIS_EXT_PORTE_WIDTH > 0) - nvicDisableVector(PINBCDE_IRQn); -#endif - -#elif KINETIS_EXT_HAS_COMMON_CD_IRQ /* KINETIS_EXT_HAS_COMMON_BCDE_IRQ */ -#if (KINETIS_EXT_PORTC_WIDTH > 0) || (KINETIS_EXT_PORTD_WIDTH > 0) - nvicDisableVector(PINCD_IRQn); -#endif - -#else /* KINETIS_EXT_HAS_COMMON_CD_IRQ */ -#if KINETIS_EXT_PORTB_WIDTH > 0 - nvicDisableVector(PINB_IRQn); -#endif -#if KINETIS_EXT_PORTC_WIDTH > 0 - nvicDisableVector(PINC_IRQn); -#endif -#if KINETIS_EXT_PORTD_WIDTH > 0 - nvicDisableVector(PIND_IRQn); -#endif -#if KINETIS_EXT_PORTE_WIDTH > 0 - nvicDisableVector(PINE_IRQn); -#endif -#endif /* !KINETIS_EXT_HAS_COMMON_CD_IRQ */ -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/* - * Generic interrupt handler. - */ -static inline void irq_handler(PORT_TypeDef * const port, const unsigned port_width, const uint8_t *channel_map) { - unsigned pin; - uint32_t isfr = port->ISFR; - - /* Clear all pending interrupts on this port. */ - port->ISFR = 0xFFFFFFFF; - - for (pin = 0; pin < port_width; pin++) { - if (isfr & (1 << pin)) { - expchannel_t channel = channel_map[pin]; - EXTD1.config->channels[channel].cb(&EXTD1, channel); - } - } -} - -/** - * @brief PORTA interrupt handler. - * - * @isr - */ -#if defined(KINETIS_PORTA_IRQ_VECTOR) && KINETIS_EXT_PORTA_WIDTH > 0 -OSAL_IRQ_HANDLER(KINETIS_PORTA_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - irq_handler(PORTA, KINETIS_EXT_PORTA_WIDTH, porta_channel_map); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_EXT_PORTA_WIDTH > 0 */ - -#if KINETIS_EXT_HAS_COMMON_BCDE_IRQ - -#if defined(KINETIS_PORTD_IRQ_VECTOR) -OSAL_IRQ_HANDLER(KINETIS_PORTD_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - -#if (KINETIS_EXT_PORTB_WIDTH > 0) - irq_handler(PORTB, KINETIS_EXT_PORTB_WIDTH, portb_channel_map); -#endif -#if (KINETIS_EXT_PORTC_WIDTH > 0) - irq_handler(PORTC, KINETIS_EXT_PORTC_WIDTH, portc_channel_map); -#endif -#if (KINETIS_EXT_PORTD_WIDTH > 0) - irq_handler(PORTD, KINETIS_EXT_PORTD_WIDTH, portd_channel_map); -#endif -#if (KINETIS_EXT_PORTE_WIDTH > 0) - irq_handler(PORTE, KINETIS_EXT_PORTE_WIDTH, porte_channel_map); -#endif - - OSAL_IRQ_EPILOGUE(); -} -#endif /* defined(KINETIS_PORTD_IRQ_VECTOR) */ - -#elif KINETIS_EXT_HAS_COMMON_CD_IRQ /* KINETIS_EXT_HAS_COMMON_BCDE_IRQ */ - -#if defined(KINETIS_PORTD_IRQ_VECTOR) -OSAL_IRQ_HANDLER(KINETIS_PORTD_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - -#if (KINETIS_EXT_PORTC_WIDTH > 0) - irq_handler(PORTC, KINETIS_EXT_PORTC_WIDTH, portc_channel_map); -#endif -#if (KINETIS_EXT_PORTD_WIDTH > 0) - irq_handler(PORTD, KINETIS_EXT_PORTD_WIDTH, portd_channel_map); -#endif - - OSAL_IRQ_EPILOGUE(); -} -#endif /* defined(KINETIS_PORTD_IRQ_VECTOR) */ - - -#else /* KINETIS_EXT_HAS_COMMON_CD_IRQ */ - -/** - * @brief PORTB interrupt handler. - * - * @isr - */ -#if defined(KINETIS_PORTB_IRQ_VECTOR) && KINETIS_EXT_PORTB_WIDTH > 0 -OSAL_IRQ_HANDLER(KINETIS_PORTB_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - irq_handler(PORTB, KINETIS_EXT_PORTB_WIDTH, portb_channel_map); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_EXT_PORTB_WIDTH > 0 */ - -/** - * @brief PORTC interrupt handler. - * - * @isr - */ -#if defined(KINETIS_PORTC_IRQ_VECTOR) && KINETIS_EXT_PORTC_WIDTH > 0 -OSAL_IRQ_HANDLER(KINETIS_PORTC_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - irq_handler(PORTC, KINETIS_EXT_PORTC_WIDTH, portc_channel_map); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_EXT_PORTC_WIDTH > 0 */ - -/** - * @brief PORTD interrupt handler. - * - * @isr - */ -#if defined(KINETIS_PORTD_IRQ_VECTOR) && KINETIS_EXT_PORTD_WIDTH > 0 -OSAL_IRQ_HANDLER(KINETIS_PORTD_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - irq_handler(PORTD, KINETIS_EXT_PORTD_WIDTH, portd_channel_map); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_EXT_PORTD_WIDTH > 0 */ - -/** - * @brief PORTE interrupt handler. - * - * @isr - */ -#if defined(KINETIS_PORTE_IRQ_VECTOR) && KINETIS_EXT_PORTE_WIDTH > 0 -OSAL_IRQ_HANDLER(KINETIS_PORTE_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - - irq_handler(PORTE, KINETIS_EXT_PORTE_WIDTH, porte_channel_map); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_EXT_PORTE_WIDTH > 0 */ - -#endif /* !KINETIS_EXT_HAS_COMMON_CD_IRQ */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level EXT driver initialization. - * - * @notapi - */ -void ext_lld_init(void) { - - /* Driver initialization.*/ - extObjectInit(&EXTD1); -} - -/** - * @brief Configures and activates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_start(EXTDriver *extp) { - expchannel_t channel; - - if (extp->state == EXT_STOP) - ext_lld_exti_irq_enable(); - - /* Configuration of automatic channels.*/ - for (channel = 0; channel < EXT_MAX_CHANNELS; channel++) { - - uint32_t mode = extp->config->channels[channel].mode; - PORT_TypeDef *port = extp->config->channels[channel].port; - uint32_t pin = extp->config->channels[channel].pin; - - /* Initialize the channel map */ -#if KINETIS_EXT_PORTA_WIDTH > 0 - if (port == PORTA) - porta_channel_map[pin] = channel; - else -#endif -#if KINETIS_EXT_PORTB_WIDTH > 0 - if (port == PORTB) - portb_channel_map[pin] = channel; - else -#endif -#if KINETIS_EXT_PORTC_WIDTH > 0 - if (port == PORTC) - portc_channel_map[pin] = channel; - else -#endif -#if KINETIS_EXT_PORTD_WIDTH > 0 - if (port == PORTD) - portd_channel_map[pin] = channel; - else -#endif -#if KINETIS_EXT_PORTE_WIDTH > 0 - if (port == PORTE) - porte_channel_map[pin] = channel; - else -#endif - {} - - if (mode & EXT_CH_MODE_AUTOSTART) - ext_lld_channel_enable(extp, channel); - else if (port != NULL) - ext_lld_channel_disable(extp, channel); - } -} - -/** - * @brief Deactivates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_stop(EXTDriver *extp) { - - if (extp->state == EXT_ACTIVE) - ext_lld_exti_irq_disable(); -} - -/** - * @brief Enables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be enabled - * - * @notapi - */ -void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) { - - uint32_t irqc; - uint32_t mode = extp->config->channels[channel].mode; - if (mode & EXT_CH_MODE_RISING_EDGE) - irqc = PCR_IRQC_RISING_EDGE; - else if (extp->config->channels[channel].mode & EXT_CH_MODE_FALLING_EDGE) - irqc = PCR_IRQC_FALLING_EDGE; - else if (extp->config->channels[channel].mode & EXT_CH_MODE_BOTH_EDGES) - irqc = PCR_IRQC_EITHER_EDGE; - else - irqc = PCR_IRQC_DISABLED; - - PORT_TypeDef *port = extp->config->channels[channel].port; - uint32_t pin = extp->config->channels[channel].pin; - - uint32_t pcr = port->PCR[pin]; - - /* Clear all the IRQC bits */ - pcr &= ~PORTx_PCRn_IRQC_MASK; - /* Set the required IRQC bits */ - pcr |= PORTx_PCRn_IRQC(irqc); - - port->PCR[pin] = pcr; -} - -/** - * @brief Disables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be disabled - * - * @notapi - */ -void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) { - - PORT_TypeDef *port = extp->config->channels[channel].port; - uint32_t pin = extp->config->channels[channel].pin; - port->PCR[pin] |= PORTx_PCRn_IRQC(PCR_IRQC_DISABLED); -} - -#endif /* HAL_USE_EXT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.h deleted file mode 100644 index bcd9cb0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_ext_lld.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/ext_lld.h - * @brief KINETIS EXT subsystem low level driver header. - * - * @addtogroup EXT - * @{ - */ - -#ifndef HAL_EXT_LLD_H_ -#define HAL_EXT_LLD_H_ - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Number of EXT channels required. - */ -#define EXT_MAX_CHANNELS KINETIS_EXTI_NUM_CHANNELS - -/** - * @name KINETIS-specific EXT channel modes - * @{ - */ -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief PORTA interrupt priority level setting. - */ -#if !defined(KINETIS_EXT_PORTA_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_EXT_PORTA_IRQ_PRIORITY 3 -#endif - -/** - * @brief PORTB interrupt priority level setting. - */ -#if !defined(KINETIS_EXT_PORTB_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_EXT_PORTB_IRQ_PRIORITY 3 -#endif - -/** - * @brief PORTC interrupt priority level setting. - */ -#if !defined(KINETIS_EXT_PORTC_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_EXT_PORTC_IRQ_PRIORITY 3 -#endif - -/** - * @brief PORTD interrupt priority level setting. - */ -#if !defined(KINETIS_EXT_PORTD_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_EXT_PORTD_IRQ_PRIORITY 3 -#endif - -/** - * @brief PORTE interrupt priority level setting. - */ -#if !defined(KINETIS_EXT_PORTE_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_EXT_PORTE_IRQ_PRIORITY 3 -#endif -/** @} */ -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief EXT channel identifier. - */ -typedef uint32_t expchannel_t; - -/** - * @brief Type of an EXT generic notification callback. - * - * @param[in] extp pointer to the @p EXPDriver object triggering the - * callback - */ -typedef void (*extcallback_t)(EXTDriver *extp, expchannel_t channel); - -/** - * @brief Channel configuration structure. - */ -typedef struct { - /** - * @brief Channel mode. - */ - uint32_t mode; - /** - * @brief Channel callback. - */ - extcallback_t cb; - - /** - * @brief Port. - */ - PORT_TypeDef *port; - - /** - * @brief Pin. - */ - uint32_t pin; -} EXTChannelConfig; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Channel configurations. - */ - EXTChannelConfig channels[EXT_MAX_CHANNELS]; - /* End of the mandatory fields.*/ -} EXTConfig; - -/** - * @brief Structure representing an EXT driver. - */ -struct EXTDriver { - /** - * @brief Driver state. - */ - extstate_t state; - /** - * @brief Current configuration data. - */ - const EXTConfig *config; - /* End of the mandatory fields.*/ -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -extern EXTDriver EXTD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void ext_lld_init(void); - void ext_lld_start(EXTDriver *extp); - void ext_lld_stop(EXTDriver *extp); - void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel); - void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EXT */ - -#endif /* HAL_EXT_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.c deleted file mode 100644 index 6e88f88..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/gpt_lld.c - * @brief KINETIS GPT subsystem low level driver source. - * - * @addtogroup GPT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_GPT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief GPTD1 driver identifier. - * @note The driver GPTD1 allocates the complex timer PIT0 when enabled. - */ -#if KINETIS_GPT_USE_PIT0 || defined(__DOXYGEN__) -GPTDriver GPTD1; -#endif - -/** - * @brief GPTD2 driver identifier. - * @note The driver GPTD2 allocates the timer PIT1 when enabled. - */ -#if KINETIS_GPT_USE_PIT1 || defined(__DOXYGEN__) -GPTDriver GPTD2; -#endif - -/** - * @brief GPTD3 driver identifier. - * @note The driver GPTD3 allocates the timer PIT2 when enabled. - */ -#if KINETIS_GPT_USE_PIT2 || defined(__DOXYGEN__) -GPTDriver GPTD3; -#endif - -/** - * @brief GPTD4 driver identifier. - * @note The driver GPTD4 allocates the timer PIT3 when enabled. - */ -#if KINETIS_GPT_USE_PIT3 || defined(__DOXYGEN__) -GPTDriver GPTD4; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -#if KINETIS_HAS_PIT_COMMON_IRQ -static uint8_t active_channels = 0; -#endif /* KINETIS_HAS_PIT_COMMON_IRQ */ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Shared IRQ handler. - * - * @param[in] gptp pointer to a @p GPTDriver object - */ -static void gpt_lld_serve_interrupt(GPTDriver *gptp) { - - /* Clear the interrupt */ - gptp->channel->TFLG |= PIT_TFLGn_TIF; - - if (gptp->state == GPT_ONESHOT) { - gptp->state = GPT_READY; /* Back in GPT_READY state. */ - gpt_lld_stop_timer(gptp); /* Timer automatically stopped. */ - } - gptp->config->callback(gptp); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if !KINETIS_HAS_PIT_COMMON_IRQ - -#if KINETIS_GPT_USE_PIT0 -/** - * @brief PIT1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_PIT0_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - gpt_lld_serve_interrupt(&GPTD1); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_GPT_USE_PIT0 */ - -#if KINETIS_GPT_USE_PIT1 -/** - * @brief PIT1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_PIT1_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - gpt_lld_serve_interrupt(&GPTD2); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_GPT_USE_PIT1 */ - -#if KINETIS_GPT_USE_PIT2 -/** - * @brief PIT2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_PIT2_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - gpt_lld_serve_interrupt(&GPTD3); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_GPT_USE_PIT2 */ - -#if KINETIS_GPT_USE_PIT3 -/** - * @brief PIT3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_PIT3_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - gpt_lld_serve_interrupt(&GPTD4); - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_GPT_USE_PIT3 */ - -#else /* !KINETIS_HAS_PIT_COMMON_IRQ */ -/** - * @brief Common PIT interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_PIT_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); -#if KINETIS_GPT_USE_PIT0 - if(GPTD1.channel->TFLG & PIT_TFLGn_TIF) - gpt_lld_serve_interrupt(&GPTD1); -#endif /* KINETIS_GPT_USE_PIT0 */ -#if KINETIS_GPT_USE_PIT1 - if(GPTD2.channel->TFLG & PIT_TFLGn_TIF) - gpt_lld_serve_interrupt(&GPTD2); -#endif /* KINETIS_GPT_USE_PIT1 */ -#if KINETIS_GPT_USE_PIT2 - if(GPTD3.channel->TFLG & PIT_TFLGn_TIF) - gpt_lld_serve_interrupt(&GPTD3); -#endif /* KINETIS_GPT_USE_PIT2 */ -#if KINETIS_GPT_USE_PIT3 - if(GPTD4.channel->TFLG & PIT_TFLGn_TIF) - gpt_lld_serve_interrupt(&GPTD4); -#endif /* KINETIS_GPT_USE_PIT3 */ - OSAL_IRQ_EPILOGUE(); -} - -#endif /* !KINETIS_HAS_PIT_COMMON_IRQ */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level GPT driver initialization. - * - * @notapi - */ -void gpt_lld_init(void) { - -#if KINETIS_GPT_USE_PIT0 - /* Driver initialization.*/ - GPTD1.channel = &PIT->CHANNEL[0]; - gptObjectInit(&GPTD1); -#endif - -#if KINETIS_GPT_USE_PIT1 - /* Driver initialization.*/ - GPTD2.channel = &PIT->CHANNEL[1]; - gptObjectInit(&GPTD2); -#endif - -#if KINETIS_GPT_USE_PIT2 - /* Driver initialization.*/ - GPTD3.channel = &PIT->CHANNEL[2]; - gptObjectInit(&GPTD3); -#endif - -#if KINETIS_GPT_USE_PIT3 - /* Driver initialization.*/ - GPTD4.channel = &PIT->CHANNEL[3]; - gptObjectInit(&GPTD4); -#endif -} - -/** - * @brief Configures and activates the GPT peripheral. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_start(GPTDriver *gptp) { - uint16_t psc; - - if (gptp->state == GPT_STOP) { - /* Clock activation.*/ - SIM->SCGC6 |= SIM_SCGC6_PIT; - gptp->clock = KINETIS_SYSCLK_FREQUENCY; - -#if !KINETIS_HAS_PIT_COMMON_IRQ - -#if KINETIS_GPT_USE_PIT0 - if (&GPTD1 == gptp) { - nvicEnableVector(PITChannel0_IRQn, KINETIS_GPT_PIT0_IRQ_PRIORITY); - } -#endif -#if KINETIS_GPT_USE_PIT1 - if (&GPTD2 == gptp) { - nvicEnableVector(PITChannel1_IRQn, KINETIS_GPT_PIT1_IRQ_PRIORITY); - } -#endif -#if KINETIS_GPT_USE_PIT2 - if (&GPTD3 == gptp) { - nvicEnableVector(PITChannel2_IRQn, KINETIS_GPT_PIT2_IRQ_PRIORITY); - } -#endif -#if KINETIS_GPT_USE_PIT3 - if (&GPTD4 == gptp) { - nvicEnableVector(PITChannel3_IRQn, KINETIS_GPT_PIT3_IRQ_PRIORITY); - } -#endif - -#else /* !KINETIS_HAS_PIT_COMMON_IRQ */ - nvicEnableVector(PIT_IRQn, KINETIS_GPT_PIT_IRQ_PRIORITY); - active_channels++; -#endif /* !KINETIS_HAS_PIT_COMMON_IRQ */ - } - - /* Prescaler value calculation.*/ - psc = (uint16_t)((gptp->clock / gptp->config->frequency) - 1); - osalDbgAssert(((uint32_t)(psc + 1) * gptp->config->frequency) == gptp->clock, - "invalid frequency"); - - /* Enable the PIT */ - PIT->MCR = 0; -} - -/** - * @brief Deactivates the GPT peripheral. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_stop(GPTDriver *gptp) { - - if (gptp->state == GPT_READY) { - SIM->SCGC6 &= ~SIM_SCGC6_PIT; - - /* Disable the channel */ - gptp->channel->TCTRL = 0; - - /* Clear pending interrupts */ - gptp->channel->TFLG |= PIT_TFLGn_TIF; - -#if !KINETIS_HAS_PIT_COMMON_IRQ - -#if KINETIS_GPT_USE_PIT0 - if (&GPTD1 == gptp) { - nvicDisableVector(PITChannel0_IRQn); - } -#endif -#if KINETIS_GPT_USE_PIT1 - if (&GPTD2 == gptp) { - nvicDisableVector(PITChannel1_IRQn); - } -#endif -#if KINETIS_GPT_USE_PIT2 - if (&GPTD3 == gptp) { - nvicDisableVector(PITChannel2_IRQn); - } -#endif -#if KINETIS_GPT_USE_PIT3 - if (&GPTD4 == gptp) { - nvicDisableVector(PITChannel3_IRQn); - } -#endif - -#else /* !KINETIS_HAS_PIT_COMMON_IRQ */ - if(--active_channels == 0) - nvicDisableVector(PIT_IRQn); -#endif /* !KINETIS_HAS_PIT_COMMON_IRQ */ - } -} - -/** - * @brief Starts the timer in continuous mode. - * - * @param[in] gptp pointer to the @p GPTDriver object - * @param[in] interval period in ticks - * - * @notapi - */ -void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) { - - /* Clear pending interrupts */ - gptp->channel->TFLG |= PIT_TFLGn_TIF; - - /* Set the interval */ - gpt_lld_change_interval(gptp, interval); - - /* Start the timer */ - gptp->channel->TCTRL |= PIT_TCTRLn_TIE | PIT_TCTRLn_TEN; -} - -/** - * @brief Stops the timer. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_stop_timer(GPTDriver *gptp) { - - /* Stop the timer */ - gptp->channel->TCTRL = 0; -} - -/** - * @brief Starts the timer in one shot mode and waits for completion. - * @details This function specifically polls the timer waiting for completion - * in order to not have extra delays caused by interrupt servicing, - * this function is only recommended for short delays. - * - * @param[in] gptp pointer to the @p GPTDriver object - * @param[in] interval time interval in ticks - * - * @notapi - */ -void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) { - struct PIT_CHANNEL *channel = gptp->channel; - - /* Disable timer and disable interrupts */ - channel->TCTRL = 0; - - /* Clear the interrupt flag */ - channel->TFLG |= PIT_TFLGn_TIF; - - /* Set the interval */ - channel->LDVAL = (gptp->clock / gptp->config->frequency) * interval; - - /* Enable Timer but keep interrupts disabled */ - channel->TCTRL = PIT_TCTRLn_TEN; - - /* Wait for the interrupt flag to be set */ - while (!(channel->TFLG & PIT_TFLGn_TIF)) - ; - - /* Disable timer and disable interrupts */ - channel->TCTRL = 0; -} - -#endif /* HAL_USE_GPT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.h deleted file mode 100644 index 1b9e5ef..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_gpt_lld.h +++ /dev/null @@ -1,333 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/gpt_lld.h - * @brief KINETIS GPT subsystem low level driver header. - * - * @addtogroup GPT - * @{ - */ - -#ifndef HAL_GPT_LLD_H_ -#define HAL_GPT_LLD_H_ - -#if HAL_USE_GPT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief GPTD1 driver enable switch. - * @details If set to @p TRUE the support for GPTD1 is included. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_GPT_USE_PIT0) || defined(__DOXYGEN__) -#define KINETIS_GPT_USE_PIT0 FALSE -#endif - -/** - * @brief GPTD2 driver enable switch. - * @details If set to @p TRUE the support for GPTD2 is included. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_GPT_USE_PIT1) || defined(__DOXYGEN__) -#define KINETIS_GPT_USE_PIT1 FALSE -#endif - -/** - * @brief GPTD3 driver enable switch. - * @details If set to @p TRUE the support for GPTD3 is included. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_GPT_USE_PIT2) || defined(__DOXYGEN__) -#define KINETIS_GPT_USE_PIT2 FALSE -#endif - -/** - * @brief GPTD4 driver enable switch. - * @details If set to @p TRUE the support for GPTD4 is included. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_GPT_USE_PIT3) || defined(__DOXYGEN__) -#define KINETIS_GPT_USE_PIT3 FALSE -#endif - -/** - * @brief GPTD1 interrupt priority level setting. - */ -#if !defined(KINETIS_GPT_PIT0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_GPT_PIT0_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD2 interrupt priority level setting. - */ -#if !defined(KINETIS_GPT_PIT1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_GPT_PIT1_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD3 interrupt priority level setting. - */ -#if !defined(KINETIS_GPT_PIT2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_GPT_PIT2_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD4 interrupt priority level setting. - */ -#if !defined(KINETIS_GPT_PIT3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_GPT_PIT3_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD* common interrupt priority level setting. - */ -#if (KINETIS_HAS_PIT_COMMON_IRQ && !defined(KINETIS_GPT_PIT_IRQ_PRIORITY)) \ - || defined(__DOXYGEN__) -#define KINETIS_GPT_PIT_IRQ_PRIORITY 2 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if KINETIS_GPT_USE_PIT0 && !KINETIS_HAS_PIT0 -#error "PIT0 not present in the selected device" -#endif - -#if KINETIS_GPT_USE_PIT1 && !KINETIS_HAS_PIT1 -#error "PIT1 not present in the selected device" -#endif - -#if KINETIS_GPT_USE_PIT2 && !KINETIS_HAS_PIT2 -#error "PIT2 not present in the selected device" -#endif - -#if KINETIS_GPT_USE_PIT3 && !KINETIS_HAS_PIT3 -#error "PIT3 not present in the selected device" -#endif - -#if !KINETIS_GPT_USE_PIT0 && !KINETIS_GPT_USE_PIT1 && \ - !KINETIS_GPT_USE_PIT2 && !KINETIS_GPT_USE_PIT3 -#error "GPT driver activated but no PIT peripheral assigned" -#endif - -#if KINETIS_GPT_USE_PIT0 && !KINETIS_HAS_PIT_COMMON_IRQ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_GPT_PIT0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PIT0" -#endif - -#if KINETIS_GPT_USE_PIT1 && !KINETIS_HAS_PIT_COMMON_IRQ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_GPT_PIT1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PIT1" -#endif - -#if KINETIS_GPT_USE_PIT2 && !KINETIS_HAS_PIT_COMMON_IRQ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_GPT_PIT2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PIT2" -#endif - -#if KINETIS_GPT_USE_PIT3 && !KINETIS_HAS_PIT_COMMON_IRQ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_GPT_PIT3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PIT3" -#endif - -#if KINETIS_HAS_PIT_COMMON_IRQ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_GPT_PIT_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PIT" -#endif - -#if KINETIS_GPT_USE_PIT0 && !defined(KINETIS_PIT0_IRQ_VECTOR) && \ - !KINETIS_HAS_PIT_COMMON_IRQ -#error "KINETIS_PIT0_IRQ_VECTOR not defined" -#endif - -#if KINETIS_GPT_USE_PIT1 && !defined(KINETIS_PIT1_IRQ_VECTOR) && \ - !KINETIS_HAS_PIT_COMMON_IRQ -#error "KINETIS_PIT1_IRQ_VECTOR not defined" -#endif - -#if KINETIS_GPT_USE_PIT2 && !defined(KINETIS_PIT2_IRQ_VECTOR) && \ - !KINETIS_HAS_PIT_COMMON_IRQ -#error "KINETIS_PIT2_IRQ_VECTOR not defined" -#endif - -#if KINETIS_GPT_USE_PIT3 && !defined(KINETIS_PIT3_IRQ_VECTOR) && \ - !KINETIS_HAS_PIT_COMMON_IRQ -#error "KINETIS_PIT3_IRQ_VECTOR not defined" -#endif - -#if KINETIS_HAS_PIT_COMMON_IRQ && !defined(KINETIS_PIT_IRQ_VECTOR) -#error "KINETIS_PIT_IRQ_VECTOR not defined" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief GPT frequency type. - */ -typedef uint32_t gptfreq_t; - -/** - * @brief GPT counter type. - */ -typedef uint32_t gptcnt_t; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - gptfreq_t frequency; - /** - * @brief Timer callback pointer. - * @note This callback is invoked on GPT counter events. - * @note This callback can be set to @p NULL but in that case the - * one-shot mode cannot be used. - */ - gptcallback_t callback; - /* End of the mandatory fields.*/ -} GPTConfig; - -/** - * @brief Structure representing a GPT driver. - */ -struct GPTDriver { - /** - * @brief Driver state. - */ - gptstate_t state; - /** - * @brief Current configuration data. - */ - const GPTConfig *config; -#if defined(GPT_DRIVER_EXT_FIELDS) - GPT_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Timer base clock. - */ - uint32_t clock; - /** - * @brief Channel structure in PIT registers block. - */ - struct PIT_CHANNEL *channel; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the interval of GPT peripheral. - * @details This function changes the interval of a running GPT unit. - * @pre The GPT unit must be running in continuous mode. - * @post The GPT unit interval is changed to the new value. - * @note The function has effect at the next cycle start. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @param[in] interval new cycle time in timer ticks - * - * @notapi - */ -#define gpt_lld_change_interval(gptp, interval) \ - ((gptp)->channel->LDVAL = (uint32_t)( \ - ( (gptp)->clock / (gptp)->config->frequency ) * \ - ( interval ) )) - -/** - * @brief Returns the interval of GPT peripheral. - * @pre The GPT unit must be running in continuous mode. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @return The current interval. - * - * @notapi - */ -#define gpt_lld_get_interval(gptp) \ - ((uint32_t)( ( (uint64_t)(gptp)->channel->LDVAL * (gptp)->config->frequency ) / \ - ( (uint32_t)(gptp)->clock ) )) - -/** - * @brief Returns the counter value of GPT peripheral. - * @pre The GPT unit must be running in continuous mode. - * @note The nature of the counter is not defined, it may count upward - * or downward, it could be continuously running or not. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @return The current counter value. - * - * @notapi - */ -#define gpt_lld_get_counter(gptp) ((gptcnt_t)(gptp)->pit->CHANNEL[gptp->channel].CVAL) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_GPT_USE_PIT0 && !defined(__DOXYGEN__) -extern GPTDriver GPTD1; -#endif - -#if KINETIS_GPT_USE_PIT1 && !defined(__DOXYGEN__) -extern GPTDriver GPTD2; -#endif - -#if KINETIS_GPT_USE_PIT2 && !defined(__DOXYGEN__) -extern GPTDriver GPTD3; -#endif - -#if KINETIS_GPT_USE_PIT3 && !defined(__DOXYGEN__) -extern GPTDriver GPTD4; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void gpt_lld_init(void); - void gpt_lld_start(GPTDriver *gptp); - void gpt_lld_stop(GPTDriver *gptp); - void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period); - void gpt_lld_stop_timer(GPTDriver *gptp); - void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_GPT */ - -#endif /* HAL_GPT_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c deleted file mode 100644 index c6b3d11..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c +++ /dev/null @@ -1,583 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/i2c_lld.c - * @brief KINETIS I2C subsystem low level driver source. - * - * @addtogroup I2C - * @{ - */ - -#include "osal.h" -#include "hal.h" - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief I2C0 driver identifier. - */ -#if KINETIS_I2C_USE_I2C0 || defined(__DOXYGEN__) -I2CDriver I2CD1; -#endif - -/** - * @brief I2C1 driver identifier. - */ -#if KINETIS_I2C_USE_I2C1 || defined(__DOXYGEN__) -I2CDriver I2CD2; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -void config_frequency(I2CDriver *i2cp) { - - /* Each index in the table corresponds to a a frequency - * divider used to generate the SCL clock from the main - * system clock. - */ - const uint16_t icr_table[] = { - /* 0x00 - 0x0F */ - 20,22,24,26,28,30,34,40,28,32,36,40,44,48,56,68, - /* 0x10 - 0x1F */ - 48,56,64,72,80,88,104,128,80,96,112,128,144,160,192,240, - /* 0x20 - 0x2F */ - 160,192,224,256,288,320,384,480,320,384,448,512,576,640,768,960, - /* 0x30 - 0x3F */ - 640,768,896,1024,1152,1280,1536,1920,1280,1536,1792,2048,2304,2560,3072,3840, - }; - - int length = sizeof(icr_table) / sizeof(icr_table[0]); - uint16_t divisor; - uint8_t i = 0, index = 0; - uint16_t best, diff; - - if (i2cp->config != NULL) - divisor = KINETIS_BUSCLK_FREQUENCY / i2cp->config->clock; - else - divisor = KINETIS_BUSCLK_FREQUENCY / 100000; - - best = ~0; - index = 0; - /* Tries to find the SCL clock which is the closest - * approximation to the clock passed in config. To - * stay on the safe side, only values that generate - * lower frequency are used. - */ - for (i = 0; i < length; i++) { - if (icr_table[i] >= divisor) { - diff = icr_table[i] - divisor; - if (diff < best) { - best = diff; - index = i; - } - } - } - - i2cp->i2c->F = index; -} - -/** - * @brief Common IRQ handler. - * @note Tries hard to clear all the pending interrupt sources, we don't - * want to go through the whole ISR and have another interrupt soon - * after. - * - * @param[in] i2cp pointer to an I2CDriver - */ -static void serve_interrupt(I2CDriver *i2cp) { - - I2C_TypeDef *i2c = i2cp->i2c; - intstate_t state = i2cp->intstate; - - /* check if we're master or slave */ - if (i2c->C1 & I2Cx_C1_MST) { - /* master */ - - if (i2c->S & I2Cx_S_ARBL) { - /* check if we lost arbitration */ - i2cp->errors |= I2C_ARBITRATION_LOST; - i2c->S |= I2Cx_S_ARBL; - /* TODO: may need to do more here, reset bus? */ - /* Perhaps clear MST? */ - } - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - else if ((i2cp->rsta_workaround == RSTA_WORKAROUND_ON) && (i2cp->i2c->FLT & I2Cx_FLT_STARTF)) { - i2cp->rsta_workaround = RSTA_WORKAROUND_OFF; - /* clear+disable STARTF/STOPF interrupts and wake up the thread */ - i2cp->i2c->FLT |= I2Cx_FLT_STOPF|I2Cx_FLT_STARTF; - i2cp->i2c->FLT &= ~I2Cx_FLT_SSIE; - i2c->S |= I2Cx_S_IICIF; - _i2c_wakeup_isr(i2cp); - } -#endif /* KL27Z RST workaround */ - - else if (i2c->S & I2Cx_S_TCF) { - /* just completed byte transfer */ - if (i2c->C1 & I2Cx_C1_TX) { - /* the byte was transmitted */ - - if (state == STATE_SEND) { - /* currently sending stuff */ - - if (i2c->S & I2Cx_S_RXAK) { - /* slave did not ACK */ - i2cp->errors |= I2C_ACK_FAILURE; - /* the thread will be woken up at the end of ISR and release the bus */ - - } else if (i2cp->txbuf != NULL && i2cp->txidx < i2cp->txbytes) { - /* slave ACK'd and we want to send more */ - i2c->D = i2cp->txbuf[i2cp->txidx++]; - } else { - /* slave ACK'd and we are done sending */ - i2cp->intstate = STATE_STOP; - /* this wakes up the waiting thread at the end of ISR */ - } - - } else if (state == STATE_RECV) { - /* should be receiving stuff, so we've just sent the address */ - - if (i2c->S & I2Cx_S_RXAK) { - /* slave did not ACK */ - i2cp->errors |= I2C_ACK_FAILURE; - /* the thread will be woken up and release the bus */ - - } else { - /* slave ACK'd, we should be receiving next */ - i2c->C1 &= ~I2Cx_C1_TX; - - if (i2cp->rxbytes > 1) { - /* multi-byte read, send ACK after next transfer */ - i2c->C1 &= ~I2Cx_C1_TXAK; - } else { - /* only 1 byte remaining, send NAK */ - i2c->C1 |= I2Cx_C1_TXAK; - } - - (void) i2c->D; /* dummy read; triggers next receive */ - } - - } /* possibly check other states here - should not happen! */ - - } else { - /* the byte was received */ - - if (state == STATE_RECV) { - /* currently receiving stuff */ - /* the received byte is now in D */ - - if (i2cp->rxbytes > 1) { - /* expecting at least one byte after this one */ - if (i2cp->rxidx == (i2cp->rxbytes - 2)) { - /* expecting exactly one byte after this one, NAK that one */ - i2c->C1 |= I2Cx_C1_TXAK; - } else { - /* expecting more than one after this one, respond with ACK */ - i2c->C1 &= ~I2Cx_C1_TXAK; - } - } - - if (i2cp->rxidx == i2cp->rxbytes - 1) { - /* D is the last byte we're expecting */ - /* release bus: switch to RX mode, send STOP */ - /* need to do it now otherwise the I2C module will wait for another byte */ - // delayMicroseconds(1); - i2c->C1 &= ~(I2Cx_C1_TX | I2Cx_C1_MST); - i2cp->intstate = STATE_STOP; - /* this wakes up the waiting thread at the end of ISR */ - } - - /* get the data from D; this triggers the next receive */ - i2cp->rxbuf[i2cp->rxidx++] = i2c->D; - - // if (i2cp->rxidx == i2cp->rxbytes) { - /* done receiving */ - // } - } /* possibly check other states here - should not happen! */ - } - - } /* possibly check other interrupt flags here */ - } else { - /* slave */ - - /* Not implemented yet */ - } - - /* Reset other interrupt sources */ -#if defined(I2Cx_FLT_STOPF) /* extra flags on KL26Z and KL27Z */ - i2cp->i2c->FLT |= I2Cx_FLT_STOPF; -#endif -#if defined(I2Cx_FLT_STARTF) /* extra flags on KL27Z */ - i2cp->i2c->FLT |= I2Cx_FLT_STARTF; -#endif - /* Reset interrupt flag */ - i2c->S |= I2Cx_S_IICIF; - - if (i2cp->errors != I2C_NO_ERROR) - _i2c_wakeup_error_isr(i2cp); - - if (i2cp->intstate == STATE_STOP) - _i2c_wakeup_isr(i2cp); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if KINETIS_I2C_USE_I2C0 || defined(__DOXYGEN__) - -OSAL_IRQ_HANDLER(KINETIS_I2C0_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&I2CD1); - OSAL_IRQ_EPILOGUE(); -} - -#endif - -#if KINETIS_I2C_USE_I2C1 || defined(__DOXYGEN__) - -OSAL_IRQ_HANDLER(KINETIS_I2C1_IRQ_VECTOR) { - - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&I2CD2); - OSAL_IRQ_EPILOGUE(); -} - -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level I2C driver initialization. - * - * @notapi - */ -void i2c_lld_init(void) { - -#if KINETIS_I2C_USE_I2C0 - i2cObjectInit(&I2CD1); - I2CD1.thread = NULL; - I2CD1.i2c = I2C0; -#endif - -#if KINETIS_I2C_USE_I2C1 - i2cObjectInit(&I2CD2); - I2CD2.thread = NULL; - I2CD2.i2c = I2C1; -#endif - -} - -/** - * @brief Configures and activates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_start(I2CDriver *i2cp) { - - if (i2cp->state == I2C_STOP) { - - /* TODO: - * The PORT must be enabled somewhere. The PIN multiplexer - * will map the I2C functionality to some PORT which must - * than be enabled. The easier way is enabling all PORTs at - * startup, which is currently being done in __early_init. - */ - -#if KINETIS_I2C_USE_I2C0 - if (&I2CD1 == i2cp) { - SIM->SCGC4 |= SIM_SCGC4_I2C0; - nvicEnableVector(I2C0_IRQn, KINETIS_I2C_I2C0_PRIORITY); - } -#endif - -#if KINETIS_I2C_USE_I2C1 - if (&I2CD2 == i2cp) { - SIM->SCGC4 |= SIM_SCGC4_I2C1; - nvicEnableVector(I2C1_IRQn, KINETIS_I2C_I2C1_PRIORITY); - } -#endif - - } - - config_frequency(i2cp); - i2cp->i2c->C1 = I2Cx_C1_IICEN | I2Cx_C1_IICIE; // reset I2C, enable interrupts - i2cp->i2c->S = I2Cx_S_IICIF | I2Cx_S_ARBL; // clear status flags just in case - i2cp->intstate = STATE_STOP; // internal state -} - -/** - * @brief Deactivates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_stop(I2CDriver *i2cp) { - - if (i2cp->state != I2C_STOP) { - - i2cp->i2c->C1 &= ~(I2Cx_C1_IICEN | I2Cx_C1_IICIE); - -#if KINETIS_I2C_USE_I2C0 - if (&I2CD1 == i2cp) { - SIM->SCGC4 &= ~SIM_SCGC4_I2C0; - nvicDisableVector(I2C0_IRQn); - } -#endif - -#if KINETIS_I2C_USE_I2C1 - if (&I2CD2 == i2cp) { - SIM->SCGC4 &= ~SIM_SCGC4_I2C1; - nvicDisableVector(I2C1_IRQn); - } -#endif - - } -} - -static inline msg_t _i2c_txrx_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) { - - msg_t msg; - systime_t start, end; - - uint8_t op = (i2cp->intstate == STATE_SEND) ? 0 : 1; - - i2cp->errors = I2C_NO_ERROR; - i2cp->addr = addr; - - i2cp->txbuf = txbuf; - i2cp->txbytes = txbytes; - i2cp->txidx = 0; - - i2cp->rxbuf = rxbuf; - i2cp->rxbytes = rxbytes; - i2cp->rxidx = 0; - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - i2cp->rsta_workaround = RSTA_WORKAROUND_OFF; -#endif /* KL27Z RST workaround */ - - /* clear status flags */ -#if defined(I2Cx_FLT_STOPF) /* extra flags on KL26Z and KL27Z */ - i2cp->i2c->FLT |= I2Cx_FLT_STOPF; -#endif -#if defined(I2Cx_FLT_STARTF) /* extra flags on KL27Z */ - i2cp->i2c->FLT |= I2Cx_FLT_STARTF; -#endif - i2cp->i2c->S = I2Cx_S_IICIF|I2Cx_S_ARBL; - - /* acquire the bus */ - /* check to see if we already have the bus */ - if(i2cp->i2c->C1 & I2Cx_C1_MST) { - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - /* need to wait for STARTF interrupt after issuing repeated start, - * otherwise the double buffering mechanism sends the last sent byte - * instead of the slave address. - * https://community.freescale.com/thread/377611 - */ - i2cp->rsta_workaround = RSTA_WORKAROUND_ON; - /* clear any interrupt bits and enable STARTF/STOPF interrupts */ - i2cp->i2c->FLT |= I2Cx_FLT_STOPF|I2Cx_FLT_STARTF; - i2cp->i2c->S |= I2Cx_S_IICIF|I2Cx_S_ARBL; - i2cp->i2c->FLT |= I2Cx_FLT_SSIE; -#endif /* KL27Z RST workaround */ - - /* send repeated start */ - i2cp->i2c->C1 |= I2Cx_C1_RSTA | I2Cx_C1_TX; - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - /* wait for the STARTF interrupt */ - msg = osalThreadSuspendTimeoutS(&i2cp->thread, timeout); - /* abort if this didn't go well (timed out) */ - if (msg != MSG_OK) { - /* release bus - RX mode, send STOP */ - i2cp->i2c->C1 &= ~(I2Cx_C1_TX | I2Cx_C1_MST); - return msg; - } -#endif /* KL27Z RST workaround */ - - } else { - /* unlock during the wait, so that tasks with - * higher priority can get attention */ - osalSysUnlock(); - - /* wait until the bus is released */ - /* Calculating the time window for the timeout on the busy bus condition.*/ - start = osalOsGetSystemTimeX(); - end = start + OSAL_MS2ST(KINETIS_I2C_BUSY_TIMEOUT); - - while(true) { - osalSysLock(); - /* If the bus is not busy then the operation can continue, note, the - loop is exited in the locked state.*/ - if(!(i2cp->i2c->S & I2Cx_S_BUSY)) - break; - /* If the system time went outside the allowed window then a timeout - condition is returned.*/ - if (!osalOsIsTimeWithinX(osalOsGetSystemTimeX(), start, end)) { - return MSG_TIMEOUT; - } - osalSysUnlock(); - } - - /* send START */ - i2cp->i2c->C1 |= I2Cx_C1_MST|I2Cx_C1_TX; - } - - /* send slave address */ - i2cp->i2c->D = addr << 1 | op; - - /* wait for the ISR to signal that the transmission (or receive if no transmission) phase is complete */ - msg = osalThreadSuspendTimeoutS(&i2cp->thread, timeout); - - /* FIXME */ - //if (i2cp->i2c->S & I2Cx_S_RXAK) - // i2cp->errors |= I2C_ACK_FAILURE; - - /* the transmitting (or receiving if no transmission) phase has finished, - * do we expect to receive something? */ - if (msg == MSG_OK && rxbuf != NULL && rxbytes > 0 && i2cp->rxidx < rxbytes) { - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - /* the same KL27Z RST workaround as above */ - i2cp->rsta_workaround = RSTA_WORKAROUND_ON; - /* clear any interrupt bits and enable STARTF/STOPF interrupts */ - i2cp->i2c->FLT |= I2Cx_FLT_STOPF|I2Cx_FLT_STARTF; - i2cp->i2c->S |= I2Cx_S_IICIF|I2Cx_S_ARBL; - i2cp->i2c->FLT |= I2Cx_FLT_SSIE; -#endif /* KL27Z RST workaround */ - - /* send repeated start */ - i2cp->i2c->C1 |= I2Cx_C1_RSTA; - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - /* wait for the STARTF interrupt */ - msg = osalThreadSuspendTimeoutS(&i2cp->thread, timeout); - /* abort if this didn't go well (timed out) */ - if (msg != MSG_OK) { - /* release bus - RX mode, send STOP */ - i2cp->i2c->C1 &= ~(I2Cx_C1_TX | I2Cx_C1_MST); - return msg; - } -#endif /* KL27Z RST workaround */ - - /* FIXME */ - // while (!(i2cp->i2c->S & I2Cx_S_BUSY)); - - i2cp->intstate = STATE_RECV; - i2cp->i2c->D = i2cp->addr << 1 | 1; - - msg = osalThreadSuspendTimeoutS(&i2cp->thread, timeout); - } - - /* release bus - RX mode, send STOP */ - // other kinetis I2C drivers wait here for 1us. is this needed? - i2cp->i2c->C1 &= ~(I2Cx_C1_TX | I2Cx_C1_MST); - /* FIXME */ - // while (i2cp->i2c->S & I2Cx_S_BUSY); - - return msg; -} - -/** - * @brief Receives data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] addr slave device address - * @param[out] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_INFINITE no timeout. - * . - * @return The operation status. - * @retval MSG_OK if the function succeeded. - * @retval MSG_RESET if one or more I2C errors occurred, the errors can - * be retrieved using @p i2cGetErrors(). - * @retval MSG_TIMEOUT if a timeout occurred before operation end. After a - * timeout the driver must be stopped and restarted - * because the bus is in an uncertain state. - * - * @notapi - */ -msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) { - - i2cp->intstate = STATE_RECV; - return _i2c_txrx_timeout(i2cp, addr, NULL, 0, rxbuf, rxbytes, timeout); -} - -/** - * @brief Transmits data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] addr slave device address - * @param[in] txbuf pointer to the transmit buffer - * @param[in] txbytes number of bytes to be transmitted - * @param[out] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_INFINITE no timeout. - * . - * @return The operation status. - * @retval MSG_OK if the function succeeded. - * @retval MSG_RESET if one or more I2C errors occurred, the errors can - * be retrieved using @p i2cGetErrors(). - * @retval MSG_TIMEOUT if a timeout occurred before operation end. After a - * timeout the driver must be stopped and restarted - * because the bus is in an uncertain state. - * - * @notapi - */ -msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) { - - i2cp->intstate = STATE_SEND; - return _i2c_txrx_timeout(i2cp, addr, txbuf, txbytes, rxbuf, rxbytes, timeout); -} - -#endif /* HAL_USE_I2C */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.h deleted file mode 100644 index bfc5008..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_i2c_lld.h +++ /dev/null @@ -1,247 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/i2c_lld.h - * @brief KINETIS I2C subsystem low level driver header. - * - * @addtogroup I2C - * @{ - */ - -#ifndef HAL_I2C_LLD_H_ -#define HAL_I2C_LLD_H_ - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define STATE_STOP 0x00 -#define STATE_SEND 0x01 -#define STATE_RECV 0x02 - -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ -#define RSTA_WORKAROUND_OFF 0x00 -#define RSTA_WORKAROUND_ON 0x01 -#endif /* KL27Z RST workaround */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief I2C0 driver enable switch. - * @details If set to @p TRUE the support for I2C0 is included. - * @note The default is @p FALSE. - */ -#if !defined(KINETIS_I2C_USE_I2C0) || defined(__DOXYGEN__) -#define KINETIS_I2C_USE_I2C0 FALSE -#endif - -/** - * @brief I2C1 driver enable switch. - * @details If set to @p TRUE the support for I2C1 is included. - * @note The default is @p FALSE. - */ -#if !defined(KINETIS_I2C_USE_I2C1) || defined(__DOXYGEN__) -#define KINETIS_I2C_USE_I2C1 FALSE -#endif -/** @} */ - -/** - * @brief I2C0 interrupt priority level setting. - */ -#if !defined(KINETIS_I2C_I2C0_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_I2C_I2C0_PRIORITY 12 -#endif - -/** - * @brief I2C1 interrupt priority level setting. - */ -#if !defined(KINETIS_I2C_I2C1_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_I2C_I2C1_PRIORITY 12 -#endif - -/** - * @brief Timeout for external clearing BUSY bus (in ms). - */ -#if !defined(KINETIS_I2C_BUSY_TIMEOUT) || defined(__DOXYGEN__) -#define KINETIS_I2C_BUSY_TIMEOUT 50 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/** @brief error checks */ -#if KINETIS_I2C_USE_I2C0 && !KINETIS_HAS_I2C0 -#error "I2C0 not present in the selected device" -#endif - -#if KINETIS_I2C_USE_I2C1 && !KINETIS_HAS_I2C1 -#error "I2C1 not present in the selected device" -#endif - - -#if !(KINETIS_I2C_USE_I2C0 || KINETIS_I2C_USE_I2C1) -#error "I2C driver activated but no I2C peripheral assigned" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/* @brief Type representing I2C address. */ -typedef uint8_t i2caddr_t; - -/* @brief Type of I2C Driver condition flags. */ -typedef uint32_t i2cflags_t; - -/* @brief Type used to control the ISR state machine. */ -typedef uint8_t intstate_t; - -/** - * @brief Driver configuration structure. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ - -/** - * @brief Driver configuration structure. - */ -typedef struct { - - /* @brief Clock to be used for the I2C bus. */ - uint32_t clock; - -} I2CConfig; - -/** - * @brief Type of a structure representing an I2C driver. - */ -typedef struct I2CDriver I2CDriver; - -/** - * @brief Structure representing an I2C driver. - */ -struct I2CDriver { - /** - * @brief Driver state. - */ - i2cstate_t state; - /** - * @brief Current configuration data. - */ - const I2CConfig *config; - /** - * @brief Error flags. - */ - i2cflags_t errors; -#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#endif /* I2C_USE_MUTUAL_EXCLUSION */ -#if defined(I2C_DRIVER_EXT_FIELDS) - I2C_DRIVER_EXT_FIELDS -#endif - /* @brief Thread waiting for I/O completion. */ - thread_reference_t thread; - /* @brief Current slave address without R/W bit. */ - i2caddr_t addr; - - /* End of the mandatory fields.*/ - - /* @brief Pointer to the buffer with data to send. */ - const uint8_t *txbuf; - /* @brief Number of bytes of data to send. */ - size_t txbytes; - /* @brief Current index in buffer when sending data. */ - size_t txidx; - /* @brief Pointer to the buffer to put received data. */ - uint8_t *rxbuf; - /* @brief Number of bytes of data to receive. */ - size_t rxbytes; - /* @brief Current index in buffer when receiving data. */ - size_t rxidx; - /* @brief Tracks current ISR state. */ - intstate_t intstate; - /* @brief Low-level register access. */ - I2C_TypeDef *i2c; -#if defined(KL27Zxxx) || defined(KL27Zxx) /* KL27Z RST workaround */ - /* @brief Auxiliary variable for KL27Z repeated start workaround. */ - intstate_t rsta_workaround; -#endif /* KL27Z RST workaround */ -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Get errors from I2C driver. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -#define i2c_lld_get_errors(i2cp) ((i2cp)->errors) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) - -#if KINETIS_I2C_USE_I2C0 -extern I2CDriver I2CD1; -#endif - -#if KINETIS_I2C_USE_I2C1 -extern I2CDriver I2CD2; -#endif - -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void i2c_lld_init(void); - void i2c_lld_start(I2CDriver *i2cp); - void i2c_lld_stop(I2CDriver *i2cp); - msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout); - msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_I2C */ - -#endif /* HAL_I2C_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.c deleted file mode 100644 index 51f8a2e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/pal_lld.c - * @brief PAL subsystem low level driver. - * - * @addtogroup PAL - * @{ - */ - -#include "osal.h" -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Reads a logical state from an I/O pad. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @return The logical state. - * @retval PAL_LOW low logical state. - * @retval PAL_HIGH high logical state. - * - * @notapi - */ -uint8_t _pal_lld_readpad(ioportid_t port, - uint8_t pad) { - - return (port->PDIR & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW; -} - -/** - * @brief Writes a logical state on an output pad. - * @note This function is not meant to be invoked directly by the - * application code. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] bit logical value, the value must be @p PAL_LOW or - * @p PAL_HIGH - * - * @notapi - */ -void _pal_lld_writepad(ioportid_t port, - uint8_t pad, - uint8_t bit) { - - if (bit == PAL_HIGH) - port->PDOR |= ((uint32_t) 1 << pad); - else - port->PDOR &= ~((uint32_t) 1 << pad); -} - -/** - * @brief Pad mode setup. - * @details This function programs a pad with the specified mode. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] mode pad mode - * - * @notapi - */ -void _pal_lld_setpadmode(ioportid_t port, - uint8_t pad, - iomode_t mode) { - - PORT_TypeDef *portcfg = NULL; - - osalDbgAssert(pad < PADS_PER_PORT, "pal_lld_setpadmode() #1, invalid pad"); - - if (mode == PAL_MODE_OUTPUT_PUSHPULL) - port->PDDR |= ((uint32_t) 1 << pad); - else - port->PDDR &= ~((uint32_t) 1 << pad); - - if (port == IOPORT1) - portcfg = PORTA; - else if (port == IOPORT2) - portcfg = PORTB; - else if (port == IOPORT3) - portcfg = PORTC; - else if (port == IOPORT4) - portcfg = PORTD; - else if (port == IOPORT5) - portcfg = PORTE; - - osalDbgAssert(portcfg != NULL, "pal_lld_setpadmode() #2, invalid port"); - - switch (mode) { - case PAL_MODE_RESET: - case PAL_MODE_INPUT: - case PAL_MODE_OUTPUT_PUSHPULL: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(1); - break; -#if KINETIS_GPIO_HAS_OPENDRAIN - case PAL_MODE_OUTPUT_OPENDRAIN: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(1) | - PORTx_PCRn_ODE; - break; -#else -#undef PAL_MODE_OUTPUT_OPENDRAIN -#endif - case PAL_MODE_INPUT_PULLUP: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(1) | - PORTx_PCRn_PE | - PORTx_PCRn_PS; - break; - case PAL_MODE_INPUT_PULLDOWN: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(1) | - PORTx_PCRn_PE; - break; - case PAL_MODE_UNCONNECTED: - case PAL_MODE_INPUT_ANALOG: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(0); - break; - case PAL_MODE_ALTERNATIVE_1: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(1); - break; - case PAL_MODE_ALTERNATIVE_2: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(2); - break; - case PAL_MODE_ALTERNATIVE_3: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(3); - break; - case PAL_MODE_ALTERNATIVE_4: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(4); - break; - case PAL_MODE_ALTERNATIVE_5: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(5); - break; - case PAL_MODE_ALTERNATIVE_6: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(6); - break; - case PAL_MODE_ALTERNATIVE_7: - portcfg->PCR[pad] = PIN_MUX_ALTERNATIVE(7); - break; - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Kinetis I/O ports configuration. - * @details Ports A-E clocks enabled. - * - * @param[in] config the Kinetis ports configuration - * - * @notapi - */ -void _pal_lld_init(const PALConfig *config) { - - int i, j; - - /* Enable clocking on all Ports */ - SIM->SCGC5 |= SIM_SCGC5_PORTA | - SIM_SCGC5_PORTB | - SIM_SCGC5_PORTC | - SIM_SCGC5_PORTD | - SIM_SCGC5_PORTE; - - /* Initial PORT and GPIO setup */ - for (i = 0; i < TOTAL_PORTS; i++) { - for (j = 0; j < PADS_PER_PORT; j++) { - pal_lld_setpadmode(config->ports[i].port, - j, - config->ports[i].pads[j]); - } - } -} - -/** - * @brief Pads mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @notapi - */ -void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode) { - - int i; - - (void)mask; - - for (i = 0; i < PADS_PER_PORT; i++) { - pal_lld_setpadmode(port, i, mode); - } -} - -#endif /* HAL_USE_PAL */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.h deleted file mode 100644 index 833d95e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_pal_lld.h +++ /dev/null @@ -1,423 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/pal_lld.h - * @brief PAL subsystem low level driver header. - * - * @addtogroup PAL - * @{ - */ - -#ifndef HAL_PAL_LLD_H_ -#define HAL_PAL_LLD_H_ - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Unsupported modes and specific modes */ -/*===========================================================================*/ - -#define PAL_MODE_ALTERNATIVE_1 0x10 -#define PAL_MODE_ALTERNATIVE_2 0x11 -#define PAL_MODE_ALTERNATIVE_3 0x12 -#define PAL_MODE_ALTERNATIVE_4 0x13 -#define PAL_MODE_ALTERNATIVE_5 0x14 -#define PAL_MODE_ALTERNATIVE_6 0x15 -#define PAL_MODE_ALTERNATIVE_7 0x16 - -#define PIN_MUX_ALTERNATIVE(x) PORTx_PCRn_MUX(x) - -/*===========================================================================*/ -/* I/O Ports Types and constants. */ -/*===========================================================================*/ - -#define TOTAL_PORTS 5 -#define PADS_PER_PORT 32 - -/** - * @brief Width, in bits, of an I/O port. - */ -#define PAL_IOPORTS_WIDTH 32 - -/** - * @brief Whole port mask. - * @brief This macro specifies all the valid bits into a port. - */ -#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFF) - -/** - * @brief Digital I/O port sized unsigned type. - */ -typedef uint32_t ioportmask_t; - -/** - * @brief Digital I/O modes. - */ -typedef uint32_t iomode_t; - -/** - * @brief Type of an I/O line. - */ -typedef uint32_t ioline_t; - -/** - * @brief Port Identifier. - * @details This type can be a scalar or some kind of pointer, do not make - * any assumption about it, use the provided macros when populating - * variables of this type. - */ -typedef GPIO_TypeDef *ioportid_t; - -/** - * @brief Port Configuration. - * @details This structure stores the configuration parameters of all pads - * belonging to a port. - */ -typedef struct { - ioportid_t port; - iomode_t pads[PADS_PER_PORT]; -} PortConfig; - -/** - * @brief Generic I/O ports static initializer. - * @details An instance of this structure must be passed to @p palInit() at - * system startup time in order to initialized the digital I/O - * subsystem. This represents only the initial setup, specific pads - * or whole ports can be reprogrammed at later time. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ -typedef struct { - PortConfig ports[TOTAL_PORTS]; -} PALConfig; - -/*===========================================================================*/ -/* I/O Ports Identifiers. */ -/*===========================================================================*/ - -/** - * @brief GPIO port A identifier. - */ -#define IOPORT1 GPIOA - -/** - * @brief GPIO port B identifier. - */ -#define IOPORT2 GPIOB - -/** - * @brief GPIO port C identifier. - */ -#define IOPORT3 GPIOC - -/** - * @brief GPIO port D identifier. - */ -#define IOPORT4 GPIOD - -/** - * @brief GPIO port E identifier. - */ -#define IOPORT5 GPIOE - -/** - * @name Line handling macros - * @{ - */ -/** - * @brief Forms a line identifier. - * @details A port/pad pair are encoded into an @p ioline_t type. The encoding - * of this type is platform-dependent. - * @note In this driver the pad number is encoded in the byte of the GPIO - * address that's zero on all Kinetis devices. - */ -#define PAL_LINE(port, pad) \ - ((ioline_t)((uint32_t)(port) | ((uint32_t)(pad)<<20))) - -/** - * @brief Decodes a port identifier from a line identifier. - */ -#define PAL_PORT(line) \ - ((GPIO_TypeDef *)(((uint32_t)(line)) & 0xF00FFFFFU)) - -/** - * @brief Decodes a pad identifier from a line identifier. - */ -#define PAL_PAD(line) \ - ((uint32_t)((uint32_t)(line) & 0x0FF00000U)>>20) - -/** - * @brief Value identifying an invalid line. - */ -#define PAL_NOLINE 0U -/** @} */ - -/*===========================================================================*/ -/* Implementation, some of the following macros could be implemented as */ -/* functions, if so please put them in pal_lld.c. */ -/*===========================================================================*/ - -/** - * @brief Low level PAL subsystem initialization. - * - * @param[in] config architecture-dependent ports configuration - * - * @notapi - */ -#define pal_lld_init(config) _pal_lld_init(config) - -/** - * @brief Reads the physical I/O port states. - * - * @param[in] port port identifier - * @return The port bits. - * - * @notapi - */ -#define pal_lld_readport(port) \ - (port)->PDIR - -/** - * @brief Reads the output latch. - * @details The purpose of this function is to read back the latched output - * value. - * - * @param[in] port port identifier - * @return The latched logical states. - * - * @notapi - */ -#define pal_lld_readlatch(port) \ - (port)->PDOR - -/** - * @brief Writes a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be written on the specified port - * - * @notapi - */ -#define pal_lld_writeport(port, bits) \ - (port)->PDOR = (bits) - -/** - * @brief Sets a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be ORed on the specified port - * - * @notapi - */ -#define pal_lld_setport(port, bits) \ - (port)->PSOR = (bits) - -/** - * @brief Clears a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be cleared on the specified port - * - * @notapi - */ -#define pal_lld_clearport(port, bits) \ - (port)->PCOR = (bits) - -/** - * @brief Toggles a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be toggled on the specified port - * - * @notapi - */ -#define pal_lld_toggleport(port, bits) \ - (port)->PTOR = (bits) - -/** - * @brief Reads a group of bits. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @return The group logical states. - * - * @notapi - */ -#define pal_lld_readgroup(port, mask, offset) 0 - -/** - * @brief Writes a group of bits. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] bits bits to be written. Values exceeding the group width - * are masked. - * - * @notapi - */ -#define pal_lld_writegroup(port, mask, offset, bits) (void)bits - -/** - * @brief Pads group mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] mode group mode - * - * @notapi - */ -#define pal_lld_setgroupmode(port, mask, offset, mode) \ - _pal_lld_setgroupmode(port, mask << offset, mode) - -/** - * @brief Reads a logical state from an I/O pad. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @return The logical state. - * @retval PAL_LOW low logical state. - * @retval PAL_HIGH high logical state. - * - * @notapi - */ -#define pal_lld_readpad(port, pad) _pal_lld_readpad(port, pad) - -/** - * @brief Writes a logical state on an output pad. - * @note This function is not meant to be invoked directly by the - * application code. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] bit logical value, the value must be @p PAL_LOW or - * @p PAL_HIGH - * - * @notapi - */ -#define pal_lld_writepad(port, pad, bit) _pal_lld_writepad(port, pad, bit) - -/** - * @brief Sets a pad logical state to @p PAL_HIGH. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_setpad(port, pad) (port)->PSOR = ((uint32_t) 1 << (pad)) - -/** - * @brief Clears a pad logical state to @p PAL_LOW. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_clearpad(port, pad) (port)->PCOR = ((uint32_t) 1 << (pad)) - -/** - * @brief Toggles a pad logical state. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_togglepad(port, pad) (port)->PTOR = ((uint32_t) 1 << (pad)) - -/** - * @brief Pad mode setup. - * @details This function programs a pad with the specified mode. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] mode pad mode - * - * @notapi - */ -#define pal_lld_setpadmode(port, pad, mode) \ - _pal_lld_setpadmode(port, pad, mode) - -#if !defined(__DOXYGEN__) -extern const PALConfig pal_default_config; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void _pal_lld_init(const PALConfig *config); - void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode); - void _pal_lld_setpadmode(ioportid_t port, - uint8_t pad, - iomode_t mode); - uint8_t _pal_lld_readpad(ioportid_t port, - uint8_t pad); - void _pal_lld_writepad(ioportid_t port, - uint8_t pad, - uint8_t bit); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PAL */ - -#endif /* HAL_PAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.c deleted file mode 100644 index c80cf22..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.c +++ /dev/null @@ -1,583 +0,0 @@ -/* - ChibiOS - Copyright (C) 2013-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/serial_lld.c - * @brief Kinetis KL2x Serial Driver subsystem low level driver source. - * - * @addtogroup SERIAL - * @{ - */ - -#include "osal.h" -#include "hal.h" - -#if HAL_USE_SERIAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief SD1 driver identifier. - */ -#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__) -SerialDriver SD1; -#endif - -#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__) -SerialDriver SD2; -#endif - -#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__) -SerialDriver SD3; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Driver default configuration. - */ -static const SerialConfig default_config = { - 38400 -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ -/** - * @brief Error handling routine. - * - * @param[in] sdp pointer to a @p SerialDriver object - * @param[in] isr UART s1 register value - */ -static void set_error(SerialDriver *sdp, uint8_t s1) { - eventflags_t sts = 0; - - if (s1 & UARTx_S1_OR) - sts |= SD_OVERRUN_ERROR; - if (s1 & UARTx_S1_PF) - sts |= SD_PARITY_ERROR; - if (s1 & UARTx_S1_FE) - sts |= SD_FRAMING_ERROR; - if (s1 & UARTx_S1_NF) - sts |= SD_NOISE_ERROR; - osalSysLockFromISR(); - chnAddFlagsI(sdp, sts); - osalSysUnlockFromISR(); -} - -/** - * @brief Common error IRQ handler. - * - * @param[in] sdp communication channel associated to the UART - */ -static void serve_error_interrupt(SerialDriver *sdp) { - UART_w_TypeDef *u = &(sdp->uart); - uint8_t s1 = *(u->s1_p); - - /* S1 bits are write-1-to-clear for UART0 on KL2x. */ - /* Clearing on K20x and KL2x/UART>0 is done by reading S1 and - * then reading D.*/ - -#if defined(KL2x) && KINETIS_SERIAL_USE_UART0 - if(sdp == &SD1) { - if(s1 & UARTx_S1_IDLE) { - *(u->s1_p) |= UARTx_S1_IDLE; - } - - if(s1 & (UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF)) { - set_error(sdp, s1); - *(u->s1_p) |= UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF; - } - return; - } -#endif /* KL2x && KINETIS_SERIAL_USE_UART0 */ - - if(s1 & UARTx_S1_IDLE) { - (void)*(u->d_p); - } - - if(s1 & (UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF)) { - set_error(sdp, s1); - (void)*(u->d_p); - } -} - -/** - * @brief Common IRQ handler. - * @note Tries hard to clear all the pending interrupt sources, we don't - * want to go through the whole ISR and have another interrupt soon - * after. - * - * @param[in] sdp communication channel associated to the UART - */ -static void serve_interrupt(SerialDriver *sdp) { - UART_w_TypeDef *u = &(sdp->uart); - uint8_t s1 = *(u->s1_p); - - if (s1 & UARTx_S1_RDRF) { - osalSysLockFromISR(); - if (iqIsEmptyI(&sdp->iqueue)) - chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE); - if (iqPutI(&sdp->iqueue, *(u->d_p)) < Q_OK) - chnAddFlagsI(sdp, SD_OVERRUN_ERROR); - osalSysUnlockFromISR(); - } - - if (s1 & UARTx_S1_TDRE) { - msg_t b; - - osalSysLockFromISR(); - b = oqGetI(&sdp->oqueue); - osalSysUnlockFromISR(); - - if (b < Q_OK) { - osalSysLockFromISR(); - chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); - osalSysUnlockFromISR(); - *(u->c2_p) &= ~UARTx_C2_TIE; - } else { - *(u->d_p) = b; - } - } - - serve_error_interrupt(sdp); -} - -/** - * @brief Attempts a TX preload - */ -static void preload(SerialDriver *sdp) { - UART_w_TypeDef *u = &(sdp->uart); - - if (*(u->s1_p) & UARTx_S1_TDRE) { - msg_t b = oqGetI(&sdp->oqueue); - if (b < Q_OK) { - chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); - return; - } - *(u->d_p) = b; - *(u->c2_p) |= UARTx_C2_TIE; - } -} - -/** - * @brief Driver output notification. - */ -#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__) -static void notify1(io_queue_t *qp) -{ - (void)qp; - preload(&SD1); -} -#endif - -#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__) -static void notify2(io_queue_t *qp) -{ - (void)qp; - preload(&SD2); -} -#endif - -#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__) -static void notify3(io_queue_t *qp) -{ - (void)qp; - preload(&SD3); -} -#endif - -/** - * @brief Common UART configuration. - * - */ -static void configure_uart(SerialDriver *sdp, const SerialConfig *config) { - - UART_w_TypeDef *uart = &(sdp->uart); - uint32_t divisor; - - /* Discard any incoming data. */ - while (*(uart->s1_p) & UARTx_S1_RDRF) { - (void)*(uart->d_p); - } - - /* Disable UART while configuring */ - *(uart->c2_p) &= ~(UARTx_C2_RE | UARTx_C2_TE); - - /* The clock sources for various UARTs can be different. */ - divisor=KINETIS_BUSCLK_FREQUENCY; - -#if defined(KL2x) - -#if KINETIS_SERIAL_USE_UART0 - if (sdp == &SD1) { - /* UART0 can be clocked from several sources on KL2x. */ - divisor = KINETIS_UART0_CLOCK_FREQ; - /* FIXME: change fixed OSR = 16 to dynamic value based on baud */ - /* Note: OSR only works on KL2x/UART0; further UARTs have fixed 16. */ - *(uart->c4_p) = UARTx_C4_OSR(16 - 1); - } -#endif /* KINETIS_SERIAL_USE_UART0 */ - -#elif defined(K20x) /* KL2x */ - - /* UARTs 0 and 1 are clocked from SYSCLK, others from BUSCLK on K20x. */ -#if KINETIS_SERIAL_USE_UART0 - if(sdp == &SD1) - divisor = KINETIS_SYSCLK_FREQUENCY; -#endif /* KINETIS_SERIAL_USE_UART0 */ -#if KINETIS_SERIAL_USE_UART1 - if(sdp == &SD2) - divisor = KINETIS_SYSCLK_FREQUENCY; -#endif /* KINETIS_SERIAL_USE_UART1 */ - -#else /* K20x */ -#error Baud rate selection not implemented for this MCU type -#endif /* K20x */ - - divisor = (divisor * 2 + 1) / config->sc_speed; - - *(uart->bdh_p) = UARTx_BDH_SBR(divisor >> 13) | (*(uart->bdh_p) & ~UARTx_BDH_SBR_MASK); - *(uart->bdl_p) = UARTx_BDL_SBR(divisor >> 5); -#if defined(K20x) - *(uart->c4_p) = UARTx_C4_BRFA(divisor) | (*(uart->c4_p) & ~UARTx_C4_BRFA_MASK); -#endif /* K20x */ - - /* Line settings. */ - *(uart->c1_p) = 0; - /* Enable error event interrupts (overrun, noise, framing, parity) */ - *(uart->c3_p) = UARTx_C3_ORIE | UARTx_C3_NEIE | UARTx_C3_FEIE | UARTx_C3_PEIE; - /* Enable the peripheral; including receive interrupts. */ - *(uart->c2_p) |= UARTx_C2_RE | UARTx_C2_RIE | UARTx_C2_TE; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(KINETIS_SERIAL0_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&SD1); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(KINETIS_SERIAL1_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&SD2); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(KINETIS_SERIAL2_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&SD3); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if KINETIS_HAS_SERIAL_ERROR_IRQ - -#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(KINETIS_SERIAL0_ERROR_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - serve_error_interrupt(&SD1); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(KINETIS_SERIAL1_ERROR_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - serve_error_interrupt(&SD2); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(KINETIS_SERIAL2_ERROR_IRQ_VECTOR) { - OSAL_IRQ_PROLOGUE(); - serve_error_interrupt(&SD3); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level serial driver initialization. - * - * @notapi - */ -void sd_lld_init(void) { - -#if KINETIS_SERIAL_USE_UART0 - /* Driver initialization.*/ - sdObjectInit(&SD1, NULL, notify1); -#if ! KINETIS_SERIAL0_IS_LPUART - SD1.uart.bdh_p = &(UART0->BDH); - SD1.uart.bdl_p = &(UART0->BDL); - SD1.uart.c1_p = &(UART0->C1); - SD1.uart.c2_p = &(UART0->C2); - SD1.uart.c3_p = &(UART0->C3); - SD1.uart.c4_p = &(UART0->C4); - SD1.uart.s1_p = (volatile uint8_t *)&(UART0->S1); - SD1.uart.s2_p = &(UART0->S2); - SD1.uart.d_p = &(UART0->D); -#else /* ! KINETIS_SERIAL0_IS_LPUART */ - /* little endian! */ - SD1.uart.bdh_p = ((uint8_t *)&(LPUART0->BAUD)) + 1; /* BDH: BAUD, byte 3 */ - SD1.uart.bdl_p = ((uint8_t *)&(LPUART0->BAUD)) + 0; /* BDL: BAUD, byte 4 */ - SD1.uart.c1_p = ((uint8_t *)&(LPUART0->CTRL)) + 0; /* C1: CTRL, byte 4 */ - SD1.uart.c2_p = ((uint8_t *)&(LPUART0->CTRL)) + 2; /* C2: CTRL, byte 2 */ - SD1.uart.c3_p = ((uint8_t *)&(LPUART0->CTRL)) + 3; /* C3: CTRL, byte 1 */ - SD1.uart.c4_p = ((uint8_t *)&(LPUART0->BAUD)) + 3; /* C4: BAUD, byte 1 */ - SD1.uart.s1_p = ((uint8_t *)&(LPUART0->STAT)) + 2; /* S1: STAT, byte 2 */ - SD1.uart.s2_p = ((uint8_t *)&(LPUART0->STAT)) + 3; /* S2: STAT, byte 1 */ - SD1.uart.d_p = ((uint8_t *)&(LPUART0->DATA)) + 0; /* D: DATA, byte 4 */ -#endif /* ! KINETIS_SERIAL0_IS_LPUART */ -#if KINETIS_SERIAL0_IS_UARTLP - SD1.uart.uartlp_p = UART0; - SD1.uart.uart_p = NULL; -#elif KINETIS_SERIAL0_IS_LPUART - SD1.uart.lpuart_p = LPUART0; - SD1.uart.uart_p = NULL; -#else /* KINETIS_SERIAL0_IS_LPUART */ - SD1.uart.uart_p = UART0; -#endif /* KINETIS_SERIAL0_IS_LPUART */ -#endif /* KINETIS_SERIAL_USE_UART0 */ - -#if KINETIS_SERIAL_USE_UART1 - /* Driver initialization.*/ - sdObjectInit(&SD2, NULL, notify2); -#if ! KINETIS_SERIAL1_IS_LPUART - SD2.uart.bdh_p = &(UART1->BDH); - SD2.uart.bdl_p = &(UART1->BDL); - SD2.uart.c1_p = &(UART1->C1); - SD2.uart.c2_p = &(UART1->C2); - SD2.uart.c3_p = &(UART1->C3); - SD2.uart.c4_p = &(UART1->C4); - SD2.uart.s1_p = (volatile uint8_t *)&(UART1->S1); - SD2.uart.s2_p = &(UART1->S2); - SD2.uart.d_p = &(UART1->D); - SD2.uart.uart_p = UART1; -#else /* ! KINETIS_SERIAL1_IS_LPUART */ - /* little endian! */ - SD2.uart.bdh_p = ((uint8_t *)&(LPUART1->BAUD)) + 1; /* BDH: BAUD, byte 3 */ - SD2.uart.bdl_p = ((uint8_t *)&(LPUART1->BAUD)) + 0; /* BDL: BAUD, byte 4 */ - SD2.uart.c1_p = ((uint8_t *)&(LPUART1->CTRL)) + 0; /* C1: CTRL, byte 4 */ - SD2.uart.c2_p = ((uint8_t *)&(LPUART1->CTRL)) + 2; /* C2: CTRL, byte 2 */ - SD2.uart.c3_p = ((uint8_t *)&(LPUART1->CTRL)) + 3; /* C3: CTRL, byte 1 */ - SD2.uart.c4_p = ((uint8_t *)&(LPUART1->BAUD)) + 3; /* C4: BAUD, byte 1 */ - SD2.uart.s1_p = ((uint8_t *)&(LPUART1->STAT)) + 2; /* S1: STAT, byte 2 */ - SD2.uart.s2_p = ((uint8_t *)&(LPUART1->STAT)) + 3; /* S2: STAT, byte 1 */ - SD2.uart.d_p = ((uint8_t *)&(LPUART1->DATA)) + 0; /* D: DATA, byte 4 */ - SD2.uart.lpuart_p = LPUART1; - SD2.uart.uart_p = NULL; -#endif /* ! KINETIS_SERIAL1_IS_LPUART */ -#endif /* KINETIS_SERIAL_USE_UART1 */ - -#if KINETIS_SERIAL_USE_UART2 - /* Driver initialization.*/ - sdObjectInit(&SD3, NULL, notify3); - SD3.uart.bdh_p = &(UART2->BDH); - SD3.uart.bdl_p = &(UART2->BDL); - SD3.uart.c1_p = &(UART2->C1); - SD3.uart.c2_p = &(UART2->C2); - SD3.uart.c3_p = &(UART2->C3); - SD3.uart.c4_p = &(UART2->C4); - SD3.uart.s1_p = (volatile uint8_t *)&(UART2->S1); - SD3.uart.s2_p = &(UART2->S2); - SD3.uart.d_p = &(UART2->D); - SD3.uart.uart_p = UART2; -#endif /* KINETIS_SERIAL_USE_UART2 */ -} - -/** - * @brief Low level serial driver configuration and (re)start. - * - * @param[in] sdp pointer to a @p SerialDriver object - * @param[in] config the architecture-dependent serial driver configuration. - * If this parameter is set to @p NULL then a default - * configuration is used. - * - * @notapi - */ -void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) { - - if (config == NULL) - config = &default_config; - - if (sdp->state == SD_STOP) { - /* Enables the peripheral.*/ - -#if KINETIS_SERIAL_USE_UART0 - if (sdp == &SD1) { -#if KINETIS_SERIAL0_IS_LPUART - SIM->SCGC5 |= SIM_SCGC5_LPUART0; - SIM->SOPT2 = - (SIM->SOPT2 & ~SIM_SOPT2_LPUART0SRC_MASK) | - SIM_SOPT2_LPUART0SRC(KINETIS_UART0_CLOCK_SRC); -#else /* KINETIS_SERIAL0_IS_LPUART */ - SIM->SCGC4 |= SIM_SCGC4_UART0; -#endif /* KINETIS_SERIAL0_IS_LPUART */ -#if KINETIS_SERIAL0_IS_UARTLP - SIM->SOPT2 = - (SIM->SOPT2 & ~SIM_SOPT2_UART0SRC_MASK) | - SIM_SOPT2_UART0SRC(KINETIS_UART0_CLOCK_SRC); -#endif /* KINETIS_SERIAL0_IS_UARTLP */ - configure_uart(sdp, config); -#if KINETIS_HAS_SERIAL_ERROR_IRQ - nvicEnableVector(UART0Status_IRQn, KINETIS_SERIAL_UART0_PRIORITY); - nvicEnableVector(UART0Error_IRQn, KINETIS_SERIAL_UART0_PRIORITY); -#else /* KINETIS_HAS_SERIAL_ERROR_IRQ */ -#if KINETIS_SERIAL0_IS_LPUART - nvicEnableVector(LPUART0_IRQn, KINETIS_SERIAL_UART0_PRIORITY); -#else /* KINETIS_SERIAL0_IS_LPUART */ - nvicEnableVector(UART0_IRQn, KINETIS_SERIAL_UART0_PRIORITY); -#endif /* KINETIS_SERIAL0_IS_LPUART */ -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - } -#endif /* KINETIS_SERIAL_USE_UART0 */ - -#if KINETIS_SERIAL_USE_UART1 - if (sdp == &SD2) { -#if KINETIS_SERIAL1_IS_LPUART - SIM->SCGC5 |= SIM_SCGC5_LPUART1; - SIM->SOPT2 = - (SIM->SOPT2 & ~SIM_SOPT2_LPUART1SRC_MASK) | - SIM_SOPT2_LPUART1SRC(KINETIS_UART1_CLOCK_SRC); -#else /* KINETIS_SERIAL1_IS_LPUART */ - SIM->SCGC4 |= SIM_SCGC4_UART1; -#endif /* KINETIS_SERIAL1_IS_LPUART */ - configure_uart(sdp, config); -#if KINETIS_HAS_SERIAL_ERROR_IRQ - nvicEnableVector(UART1Status_IRQn, KINETIS_SERIAL_UART1_PRIORITY); - nvicEnableVector(UART1Error_IRQn, KINETIS_SERIAL_UART0_PRIORITY); -#else /* KINETIS_HAS_SERIAL_ERROR_IRQ */ -#if KINETIS_SERIAL1_IS_LPUART - nvicEnableVector(LPUART1_IRQn, KINETIS_SERIAL_UART1_PRIORITY); -#else /* KINETIS_SERIAL1_IS_LPUART */ - nvicEnableVector(UART1_IRQn, KINETIS_SERIAL_UART1_PRIORITY); -#endif /* KINETIS_SERIAL1_IS_LPUART */ -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - } -#endif /* KINETIS_SERIAL_USE_UART1 */ - -#if KINETIS_SERIAL_USE_UART2 - if (sdp == &SD3) { - SIM->SCGC4 |= SIM_SCGC4_UART2; - configure_uart(sdp, config); -#if KINETIS_HAS_SERIAL_ERROR_IRQ - nvicEnableVector(UART2Status_IRQn, KINETIS_SERIAL_UART2_PRIORITY); - nvicEnableVector(UART2Error_IRQn, KINETIS_SERIAL_UART0_PRIORITY); -#else /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - nvicEnableVector(UART2_IRQn, KINETIS_SERIAL_UART2_PRIORITY); -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - } -#endif /* KINETIS_SERIAL_USE_UART2 */ - - } - /* Configures the peripheral.*/ - -} - -/** - * @brief Low level serial driver stop. - * @details De-initializes the USART, stops the associated clock, resets the - * interrupt vector. - * - * @param[in] sdp pointer to a @p SerialDriver object - * - * @notapi - */ -void sd_lld_stop(SerialDriver *sdp) { - - if (sdp->state == SD_READY) { - /* TODO: Resets the peripheral.*/ - -#if KINETIS_SERIAL_USE_UART0 - if (sdp == &SD1) { -#if KINETIS_HAS_SERIAL_ERROR_IRQ - nvicDisableVector(UART0Status_IRQn); - nvicDisableVector(UART0Error_IRQn); -#else /* KINETIS_HAS_SERIAL_ERROR_IRQ */ -#if KINETIS_SERIAL0_IS_LPUART - nvicDisableVector(LPUART0_IRQn); -#else /* KINETIS_SERIAL0_IS_LPUART */ - nvicDisableVector(UART0_IRQn); -#endif /* KINETIS_SERIAL0_IS_LPUART */ -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ -#if KINETIS_SERIAL0_IS_LPUART - SIM->SCGC5 &= ~SIM_SCGC5_LPUART0; -#else /* KINETIS_SERIAL0_IS_LPUART */ - SIM->SCGC4 &= ~SIM_SCGC4_UART0; -#endif /* KINETIS_SERIAL0_IS_LPUART */ - } -#endif - -#if KINETIS_SERIAL_USE_UART1 - if (sdp == &SD2) { -#if KINETIS_HAS_SERIAL_ERROR_IRQ - nvicDisableVector(UART1Status_IRQn); - nvicDisableVector(UART1Error_IRQn); -#else /* KINETIS_HAS_SERIAL_ERROR_IRQ */ -#if KINETIS_SERIAL1_IS_LPUART - nvicDisableVector(LPUART1_IRQn); -#else /* KINETIS_SERIAL1_IS_LPUART */ - nvicDisableVector(UART1_IRQn); -#endif /* KINETIS_SERIAL1_IS_LPUART */ -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ -#if KINETIS_SERIAL1_IS_LPUART - SIM->SCGC5 &= ~SIM_SCGC5_LPUART1; -#else /* KINETIS_SERIAL1_IS_LPUART */ - SIM->SCGC4 &= ~SIM_SCGC4_UART1; -#endif /* KINETIS_SERIAL1_IS_LPUART */ - } -#endif - -#if KINETIS_SERIAL_USE_UART2 - if (sdp == &SD3) { -#if KINETIS_HAS_SERIAL_ERROR_IRQ - nvicDisableVector(UART2Status_IRQn); - nvicDisableVector(UART2Error_IRQn); -#else /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - nvicDisableVector(UART2_IRQn); -#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */ - SIM->SCGC4 &= ~SIM_SCGC4_UART2; - } -#endif - } -} - -#endif /* HAL_USE_SERIAL */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.h deleted file mode 100644 index f11c063..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_serial_lld.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - ChibiOS - Copyright (C) 2013-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL2x/serial_lld.h - * @brief Kinetis KL2x Serial Driver subsystem low level driver header. - * - * @addtogroup SERIAL - * @{ - */ - -#ifndef HAL_SERIAL_LLD_H_ -#define HAL_SERIAL_LLD_H_ - -#if HAL_USE_SERIAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief SD1 driver enable switch. - * @details If set to @p TRUE the support for SD1 is included. - */ -#if !defined(KINETIS_SERIAL_USE_UART0) || defined(__DOXYGEN__) -#define KINETIS_SERIAL_USE_UART0 FALSE -#endif -/** - * @brief SD2 driver enable switch. - * @details If set to @p TRUE the support for SD2 is included. - */ -#if !defined(KINETIS_SERIAL_USE_UART1) || defined(__DOXYGEN__) -#define KINETIS_SERIAL_USE_UART1 FALSE -#endif -/** - * @brief SD3 driver enable switch. - * @details If set to @p TRUE the support for SD3 is included. - */ -#if !defined(KINETIS_SERIAL_USE_UART2) || defined(__DOXYGEN__) -#define KINETIS_SERIAL_USE_UART2 FALSE -#endif - -/** - * @brief UART0 interrupt priority level setting. - */ -#if !defined(KINETIS_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_SERIAL_UART0_PRIORITY 12 -#endif - -/** - * @brief UART1 interrupt priority level setting. - */ -#if !defined(KINETIS_SERIAL_UART1_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_SERIAL_UART1_PRIORITY 12 -#endif - -/** - * @brief UART2 interrupt priority level setting. - */ -#if !defined(KINETIS_SERIAL_UART2_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_SERIAL_UART2_PRIORITY 12 -#endif - -/** - * @brief UART0 clock source. - */ -#if !defined(KINETIS_UART0_CLOCK_SRC) || defined(__DOXYGEN__) -#define KINETIS_UART0_CLOCK_SRC 1 /* MCGFLLCLK clock, or MCGPLLCLK/2; or IRC48M */ -#endif - -/** - * @brief UART1 clock source. - */ -#if !defined(KINETIS_UART1_CLOCK_SRC) || defined(__DOXYGEN__) -#define KINETIS_UART1_CLOCK_SRC 1 /* IRC48M */ -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/** @brief error checks */ -#if KINETIS_SERIAL_USE_UART0 && !KINETIS_HAS_SERIAL0 -#error "UART0 not present in the selected device" -#endif - -#if KINETIS_SERIAL_USE_UART1 && !KINETIS_HAS_SERIAL1 -#error "UART1 not present in the selected device" -#endif - -#if KINETIS_SERIAL_USE_UART2 && !KINETIS_HAS_SERIAL2 -#error "UART2 not present in the selected device" -#endif - -#if !(KINETIS_SERIAL_USE_UART0 || KINETIS_SERIAL_USE_UART1 || \ - KINETIS_SERIAL_USE_UART2) -#error "Serial driver activated but no UART peripheral assigned" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Generic Serial Driver configuration structure. - * @details An instance of this structure must be passed to @p sdStart() - * in order to configure and start a serial driver operations. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ -typedef struct { - /** - * @brief Bit rate. - */ - uint32_t sc_speed; - /* End of the mandatory fields.*/ -} SerialConfig; - -/** - * @brief Generic UART register structure. - * @note Individual UART register blocks (even within the same chip) can differ. - */ - -typedef struct { - volatile uint8_t* bdh_p; - volatile uint8_t* bdl_p; - volatile uint8_t* c1_p; - volatile uint8_t* c2_p; - volatile uint8_t* c3_p; - volatile uint8_t* c4_p; - volatile uint8_t* s1_p; - volatile uint8_t* s2_p; - volatile uint8_t* d_p; - UART_TypeDef *uart_p; -#if KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_UARTLP - UARTLP_TypeDef *uartlp_p; -#endif /* KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_UARTLP */ -#if (KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_LPUART) \ - || (KINETIS_SERIAL_USE_UART1 && KINETIS_SERIAL1_IS_LPUART) - LPUART_TypeDef *lpuart_p; -#endif /* KINETIS_SERIAL_USE_UART0 && KINETIS_SERIAL0_IS_LPUART */ -} UART_w_TypeDef; - -/** - * @brief @p SerialDriver specific data. - */ -#define _serial_driver_data \ - _base_asynchronous_channel_data \ - /* Driver state.*/ \ - sdstate_t state; \ - /* Input queue.*/ \ - input_queue_t iqueue; \ - /* Output queue.*/ \ - output_queue_t oqueue; \ - /* Input circular buffer.*/ \ - uint8_t ib[SERIAL_BUFFERS_SIZE]; \ - /* Output circular buffer.*/ \ - uint8_t ob[SERIAL_BUFFERS_SIZE]; \ - /* End of the mandatory fields.*/ \ - /* Pointer to the UART registers block.*/ \ - UART_w_TypeDef uart; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_SERIAL_USE_UART0 && !defined(__DOXYGEN__) -extern SerialDriver SD1; -#endif - -#if KINETIS_SERIAL_USE_UART1 && !defined(__DOXYGEN__) -extern SerialDriver SD2; -#endif - -#if KINETIS_SERIAL_USE_UART2 && !defined(__DOXYGEN__) -extern SerialDriver SD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void sd_lld_init(void); - void sd_lld_start(SerialDriver *sdp, const SerialConfig *config); - void sd_lld_stop(SerialDriver *sdp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SERIAL */ - -#endif /* HAL_SERIAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.c deleted file mode 100644 index e6ed9e5..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/st_lld.c - * @brief ST Driver subsystem low level driver code. - * - * @addtogroup ST - * @{ - */ - -#include "hal.h" - -#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__) -/** - * @brief System Timer vector. - * @details This interrupt is used for system tick in periodic mode. - * - * @isr - */ -OSAL_IRQ_HANDLER(SysTick_Handler) { - - OSAL_IRQ_PROLOGUE(); - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level ST driver initialization. - * - * @notapi - */ -void st_lld_init(void) { -#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC - /* Periodic systick mode, the Cortex-Mx internal systick timer is used - in this mode.*/ - SysTick->LOAD = (KINETIS_SYSCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1; - SysTick->VAL = 0; - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_ENABLE_Msk | - SysTick_CTRL_TICKINT_Msk; - - /* IRQ enabled.*/ - nvicSetSystemHandlerPriority(HANDLER_SYSTICK, KINETIS_ST_IRQ_PRIORITY); -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ -} - -#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.h deleted file mode 100644 index 29c7035..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_st_lld.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014-2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/st_lld.h - * @brief ST Driver subsystem low level driver header. - * @details This header is designed to be include-able without having to - * include other files from the HAL. - * - * @addtogroup ST - * @{ - */ - -#ifndef HAL_ST_LLD_H_ -#define HAL_ST_LLD_H_ - -#include "mcuconf.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief SysTick timer IRQ priority. - */ -#if !defined(KINETIS_ST_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define KINETIS_ST_IRQ_PRIORITY 8 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void st_lld_init(void); -#ifdef __cplusplus -} -#endif - -/*===========================================================================*/ -/* Driver inline functions. */ -/*===========================================================================*/ - -/** - * @brief Returns the time counter value. - * - * @return The counter value. - * - * @notapi - */ -static inline systime_t st_lld_get_counter(void) { - - return (systime_t)0; -} - -/** - * @brief Starts the alarm. - * @note Makes sure that no spurious alarms are triggered after - * this call. - * - * @param[in] time the time to be set for the first alarm - * - * @notapi - */ -static inline void st_lld_start_alarm(systime_t time) { - - (void)time; -} - -/** - * @brief Stops the alarm interrupt. - * - * @notapi - */ -static inline void st_lld_stop_alarm(void) { - -} - -/** - * @brief Sets the alarm time. - * - * @param[in] time the time to be set for the next alarm - * - * @notapi - */ -static inline void st_lld_set_alarm(systime_t time) { - - (void)time; -} - -/** - * @brief Returns the current alarm time. - * - * @return The currently set alarm time. - * - * @notapi - */ -static inline systime_t st_lld_get_alarm(void) { - - return (systime_t)0; -} - -/** - * @brief Determines if the alarm is active. - * - * @return The alarm status. - * @retval false if the alarm is not active. - * @retval true is the alarm is active - * - * @notapi - */ -static inline bool st_lld_is_alarm_active(void) { - - return false; -} - -#endif /* HAL_ST_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.c deleted file mode 100644 index e8d9778..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.c +++ /dev/null @@ -1,832 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde/ - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/usb_lld.c - * @brief KINETIS USB subsystem low level driver source. - * - * @addtogroup USB - * @{ - */ - -#include - -#include "hal.h" - -#if HAL_USE_USB || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief USB0 driver identifier.*/ -#if KINETIS_USB_USE_USB0 || defined(__DOXYGEN__) -USBDriver USBD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief IN EP0 state. - */ -USBInEndpointState ep0in; - -/** - * @brief OUT EP0 state. - */ -USBOutEndpointState ep0out; - -/** - * @brief Buffer for the EP0 setup packets. - */ -static uint8_t ep0setup_buffer[8]; - -/** - * @brief EP0 initialization structure. - */ -static const USBEndpointConfig ep0config = { - USB_EP_MODE_TYPE_CTRL, - _usb_ep0setup, - _usb_ep0in, - _usb_ep0out, - 64, - 64, - &ep0in, - &ep0out, - 1, - ep0setup_buffer -}; - -/* - * Buffer Descriptor Table (BDT) - */ - -/* - * Buffer Descriptor (BD) - * */ -typedef struct { - uint32_t desc; - uint8_t* addr; -} bd_t; - -/* - * Buffer Descriptor fields - p.889 - */ -#define BDT_OWN 0x80 -#define BDT_DATA 0x40 -#define BDT_KEEP 0x20 -#define BDT_NINC 0x10 -#define BDT_DTS 0x08 -#define BDT_STALL 0x04 - -#define BDT_DESC(bc, data) (BDT_OWN | BDT_DTS | ((data&0x1)<<6) | ((bc) << 16)) - -/* - * BDT PID - p.891 - */ -#define BDT_PID_OUT 0x01 -#define BDT_PID_IN 0x09 -#define BDT_PID_SETUP 0x0D -#define BDT_TOK_PID(n) (((n)>>2)&0xF) - -/* - * BDT index fields - */ -#define DATA0 0 -#define DATA1 1 - -#define RX 0 -#define TX 1 - -#define EVEN 0 -#define ODD 1 - -#define BDT_INDEX(endpoint, tx, odd) (((endpoint)<<2) | ((tx)<<1) | (odd)) -/* - * Get RX-ed/TX-ed bytes count from BDT entry - */ -#define BDT_BC(n) (((n)>>16)&0x3FF) - -/* The USB-FS needs 2 BDT entry per endpoint direction - * that adds to: 2*2*16 BDT entries for 16 bi-directional EP - */ -static volatile bd_t _bdt[(KINETIS_USB_ENDPOINTS)*2*2] __attribute__((aligned(512))); - -/* FIXME later with dyn alloc - * 16 EP - * 2 directions per EP - * 2 buffer per direction - * => 64 buffers - */ -static uint8_t _usbb[KINETIS_USB_ENDPOINTS*4][64] __attribute__((aligned(4))); -static volatile uint8_t _usbbn=0; -uint8_t* usb_alloc(uint8_t size) -{ - (void)size; - if(_usbbn < (KINETIS_USB_ENDPOINTS)*4) - return _usbb[_usbbn++]; - while(1); /* Should not happen, ever */ -} -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/* Called from locked ISR. */ -void usb_packet_transmit(USBDriver *usbp, usbep_t ep, size_t n) -{ - const USBEndpointConfig *epc = usbp->epc[ep]; - USBInEndpointState *isp = epc->in_state; - - bd_t *bd = (bd_t *)&_bdt[BDT_INDEX(ep, TX, isp->odd_even)]; - - if (n > (size_t)epc->in_maxsize) - n = (size_t)epc->in_maxsize; - - /* Copy from buf to _usbb[] */ - size_t i=0; - for(i=0;iaddr[i] = isp->txbuf[i]; - - /* Update the Buffer status */ - bd->desc = BDT_DESC(n, isp->data_bank); - /* Toggle the odd and data bits for next TX */ - isp->data_bank ^= DATA1; - isp->odd_even ^= ODD; -} - -/* Called from locked ISR. */ -void usb_packet_receive(USBDriver *usbp, usbep_t ep, size_t n) -{ - const USBEndpointConfig *epc = usbp->epc[ep]; - USBOutEndpointState *osp = epc->out_state; - - bd_t *bd = (bd_t *)&_bdt[BDT_INDEX(ep, RX, osp->odd_even)]; - - if (n > (size_t)epc->out_maxsize) - n = (size_t)epc->out_maxsize; - - /* Copy from _usbb[] to buf */ - size_t i=0; - for(i=0;irxbuf[i] = bd->addr[i]; - - /* Update the Buffer status - * Set current buffer to same DATA bank and then toggle. - * Since even/odd buffers are ping-pong and setup re-initialized them - * this should work correctly */ - bd->desc = BDT_DESC(epc->out_maxsize, osp->data_bank); - osp->data_bank ^= DATA1; - usb_lld_start_out(usbp, ep); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*============================================================================*/ - -#if KINETIS_USB_USE_USB0 || defined(__DOXYGEN__) -/** - * @brief USB interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(KINETIS_USB_IRQ_VECTOR) { - USBDriver *usbp = &USBD1; - uint8_t istat = USB0->ISTAT; - - OSAL_IRQ_PROLOGUE(); - - /* 04 - Bit2 - Start Of Frame token received */ - if(istat & USBx_ISTAT_SOFTOK) { - _usb_isr_invoke_sof_cb(usbp); - USB0->ISTAT = USBx_ISTAT_SOFTOK; - } - - /* 08 - Bit3 - Token processing completed */ - while(istat & USBx_ISTAT_TOKDNE) { - uint8_t stat = USB0->STAT; - uint8_t ep = stat >> 4; - if(ep > KINETIS_USB_ENDPOINTS) { - OSAL_IRQ_EPILOGUE(); - return; - } - const USBEndpointConfig *epc = usbp->epc[ep]; - - /* Get the correct BDT entry */ - uint8_t odd_even = (stat & USBx_STAT_ODD_MASK) >> USBx_STAT_ODD_SHIFT; - uint8_t tx_rx = (stat & USBx_STAT_TX_MASK) >> USBx_STAT_TX_SHIFT; - bd_t *bd = (bd_t*)&_bdt[BDT_INDEX(ep,tx_rx,odd_even)]; - - /* Update the ODD/EVEN state for RX */ - if(tx_rx == RX && epc->out_state != NULL) - epc->out_state->odd_even = odd_even; - - switch(BDT_TOK_PID(bd->desc)) - { - case BDT_PID_SETUP: // SETUP - { - /* Clear any pending IN stuff */ - _bdt[BDT_INDEX(ep, TX, EVEN)].desc = 0; - _bdt[BDT_INDEX(ep, TX, ODD)].desc = 0; - /* Also in the chibios state machine */ - (usbp)->receiving &= ~1; - /* After a SETUP, IN is always DATA1 */ - usbp->epc[ep]->in_state->data_bank = DATA1; - - /* Call SETUP function (ChibiOS core), which sends back stuff */ - _usb_isr_invoke_setup_cb(usbp, ep); - /* Buffer is released by the above callback. */ - /* from Paul: "unfreeze the USB, now that we're ready" */ - USB0->CTL = USBx_CTL_USBENSOFEN; - } break; - case BDT_PID_IN: // IN - { - if(epc->in_state == NULL) - break; - /* Special case for SetAddress for EP0 */ - if(ep == 0 && (((uint16_t)usbp->setup[0]<<8)|usbp->setup[1]) == 0x0500) - { - usbp->address = usbp->setup[2]; - usb_lld_set_address(usbp); - _usb_isr_invoke_event_cb(usbp, USB_EVENT_ADDRESS); - usbp->state = USB_SELECTED; - } - uint16_t txed = BDT_BC(bd->desc); - epc->in_state->txcnt += txed; - if(epc->in_state->txcnt < epc->in_state->txsize) - { - epc->in_state->txbuf += txed; - osalSysLockFromISR(); - usb_packet_transmit(usbp,ep,epc->in_state->txsize - epc->in_state->txcnt); - osalSysUnlockFromISR(); - } - else - { - if(epc->in_cb != NULL) - _usb_isr_invoke_in_cb(usbp,ep); - } - } break; - case BDT_PID_OUT: // OUT - { - if(epc->out_state == NULL) - break; - uint16_t rxed = BDT_BC(bd->desc); - - osalSysLockFromISR(); - usb_packet_receive(usbp,ep,rxed); - osalSysUnlockFromISR(); - if(rxed) - { - epc->out_state->rxbuf += rxed; - - /* Update transaction data */ - epc->out_state->rxcnt += rxed; - epc->out_state->rxsize -= rxed; - epc->out_state->rxpkts -= 1; - - /* The transaction is completed if the specified number of packets - has been received or the current packet is a short packet.*/ - if ((rxed < epc->out_maxsize) || (epc->out_state->rxpkts == 0)) - { - if(epc->out_cb != NULL) - _usb_isr_invoke_out_cb(usbp, ep); - } - } - } break; - default: - break; - } - USB0->ISTAT = USBx_ISTAT_TOKDNE; - istat = USB0->ISTAT; - } - - /* 01 - Bit0 - Valid USB Reset received */ - if(istat & USBx_ISTAT_USBRST) { - _usb_reset(usbp); - USB0->ISTAT = USBx_ISTAT_USBRST; - OSAL_IRQ_EPILOGUE(); - return; - } - - /* 80 - Bit7 - STALL handshake received */ - if(istat & USBx_ISTAT_STALL) { - USB0->ISTAT = USBx_ISTAT_STALL; - } - - /* 02 - Bit1 - ERRSTAT condition triggered */ - if(istat & USBx_ISTAT_ERROR) { - uint8_t err = USB0->ERRSTAT; - USB0->ERRSTAT = err; - USB0->ISTAT = USBx_ISTAT_ERROR; - } - - /* 10 - Bit4 - Constant IDLE on USB bus detected */ - if(istat & USBx_ISTAT_SLEEP) { - /* This seems to fire a few times before the device is - * configured - need to ignore those occurences somehow. */ - /* The other option would be to only activate INTEN_SLEEPEN - * on CONFIGURED event, but that would need to be done in - * user firmware. */ - if(usbp->state == USB_ACTIVE) { - _usb_suspend(usbp); - /* Enable interrupt on resume */ - USB0->INTEN |= USBx_INTEN_RESUMEEN; - } - - // low-power version (check!): - // enable wakeup interrupt on resume USB signaling - // (check that it was a wakeup int with USBx_USBTRC0_USB_RESUME_INT) - //? USB0->USBTRC0 |= USBx_USBTRC0_USBRESMEN - // suspend the USB module - //? USB0->USBCTRL |= USBx_USBCTRL_SUSP; - - USB0->ISTAT = USBx_ISTAT_SLEEP; - } - - /* 20 - Bit5 - Resume - Only allowed in sleep=suspend mode */ - if(istat & USBx_ISTAT_RESUME) { - /* Disable interrupt on resume (should be disabled - * during normal operation according to datasheet). */ - USB0->INTEN &= ~USBx_INTEN_RESUMEEN; - - // low power version (check!): - // desuspend the USB module - //? USB0->USBCTRL &= ~USBx_USBCTRL_SUSP; - // maybe also - //? USB0->CTL = USBx_CTL_USBENSOFEN; - _usb_wakeup(usbp); - USB0->ISTAT = USBx_ISTAT_RESUME; - } - - /* 40 - Bit6 - ATTACH - used */ - - OSAL_IRQ_EPILOGUE(); -} -#endif /* KINETIS_USB_USE_USB0 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level USB driver initialization. - * - * @notapi - */ -void usb_lld_init(void) { - /* Driver initialization.*/ - usbObjectInit(&USBD1); - -#if KINETIS_USB_USE_USB0 - - SIM->SOPT2 |= SIM_SOPT2_USBSRC; - -#if defined(K20x5) || defined(K20x7) - -#if KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEI - - /* MCGOUTCLK is the SYSCLK frequency, so don't divide for USB clock */ - SIM->CLKDIV2 = SIM_CLKDIV2_USBDIV(0); - -#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE - - #define KINETIS_USBCLK_FREQUENCY 48000000UL - uint32_t i,j; - for(i=0; i < 2; i++) { - for(j=0; j < 8; j++) { - if((KINETIS_PLLCLK_FREQUENCY * (i+1)) == (KINETIS_USBCLK_FREQUENCY*(j+1))) { - SIM->CLKDIV2 = i | SIM_CLKDIV2_USBDIV(j); - goto usbfrac_match_found; - } - } - } - usbfrac_match_found: - osalDbgAssert(i<2 && j <8,"USB Init error"); - -#else /* KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE */ -#error USB clock setting not implemented for this KINETIS_MCG_MODE -#endif /* KINETIS_MCG_MODE == ... */ - -#elif defined(KL25) || defined (KL26) || defined(KL27) - - /* No extra clock dividers for USB clock */ - -#else /* defined(KL25) || defined (KL26) || defined(KL27) */ -#error USB driver not implemented for your MCU type -#endif - -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Configures and activates the USB peripheral. - * - * @param[in] usbp pointer to the @p USBDriver object - * - * @notapi - */ -void usb_lld_start(USBDriver *usbp) { - if (usbp->state == USB_STOP) { -#if KINETIS_USB_USE_USB0 - if (&USBD1 == usbp) { - /* Clear BDT */ - uint8_t i; - for(i=0;iSCGC4 |= SIM_SCGC4_USBOTG; -#else /* KINETIS_USB0_IS_USBOTG */ - SIM->SCGC4 |= SIM_SCGC4_USBFS; -#endif /* KINETIS_USB0_IS_USBOTG */ - -#if KINETIS_HAS_USB_CLOCK_RECOVERY - USB0->CLK_RECOVER_IRC_EN |= USBx_CLK_RECOVER_IRC_EN_IRC_EN; - USB0->CLK_RECOVER_CTRL |= USBx_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN; -#endif /* KINETIS_HAS_USB_CLOCK_RECOVERY */ - - /* Reset USB module, wait for completion */ - USB0->USBTRC0 |= USBx_USBTRC0_USBRESET; - while ((USB0->USBTRC0 & USBx_USBTRC0_USBRESET)); - - /* Set BDT Address */ - USB0->BDTPAGE1 = ((uint32_t)_bdt) >> 8; - USB0->BDTPAGE2 = ((uint32_t)_bdt) >> 16; - USB0->BDTPAGE3 = ((uint32_t)_bdt) >> 24; - - /* Clear all ISR flags */ - USB0->ISTAT = 0xFF; - USB0->ERRSTAT = 0xFF; -#if KINETIS_USB0_IS_USBOTG - USB0->OTGISTAT = 0xFF; -#endif /* KINETIS_USB0_IS_USBOTG */ - USB0->USBTRC0 |= 0x40; //a hint was given that this is an undocumented interrupt bit - - /* Enable USB */ - USB0->CTL = USBx_CTL_ODDRST | USBx_CTL_USBENSOFEN; - USB0->USBCTRL = 0; - - /* Enable reset interrupt */ - USB0->INTEN |= USBx_INTEN_USBRSTEN; - - /* Enable interrupt in NVIC */ -#if KINETIS_USB0_IS_USBOTG - nvicEnableVector(USB_OTG_IRQn, KINETIS_USB_USB0_IRQ_PRIORITY); -#else /* KINETIS_USB0_IS_USBOTG */ - nvicEnableVector(USB_IRQn, KINETIS_USB_USB0_IRQ_PRIORITY); -#endif /* KINETIS_USB0_IS_USBOTG */ - } -#endif /* KINETIS_USB_USE_USB0 */ - } -} - -/** - * @brief Deactivates the USB peripheral. - * - * @param[in] usbp pointer to the @p USBDriver object - * - * @notapi - */ -void usb_lld_stop(USBDriver *usbp) { - /* TODO: If in ready state then disables the USB clock.*/ - if (usbp->state == USB_STOP) { -#if KINETIS_USB_USE_USB0 - if (&USBD1 == usbp) { -#if KINETIS_USB0_IS_USBOTG - nvicDisableVector(USB_OTG_IRQn); -#else /* KINETIS_USB0_IS_USBOTG */ - nvicDisableVector(USB_IRQn); -#endif /* KINETIS_USB0_IS_USBOTG */ - } -#endif /* KINETIS_USB_USE_USB0 */ - } -} - -/** - * @brief USB low level reset routine. - * - * @param[in] usbp pointer to the @p USBDriver object - * - * @notapi - */ -void usb_lld_reset(USBDriver *usbp) { - // FIXME, dyn alloc - _usbbn = 0; - -#if KINETIS_USB_USE_USB0 - - /* Reset BDT ODD/EVEN bits */ - USB0->CTL = USBx_CTL_ODDRST; - - /* EP0 initialization.*/ - usbp->epc[0] = &ep0config; - usb_lld_init_endpoint(usbp, 0); - - /* Clear all pending interrupts */ - USB0->ERRSTAT = 0xFF; - USB0->ISTAT = 0xFF; - - /* Set the address to zero during enumeration */ - usbp->address = 0; - USB0->ADDR = 0; - - /* Enable other interrupts */ - USB0->ERREN = 0xFF; - USB0->INTEN = USBx_INTEN_TOKDNEEN | - USBx_INTEN_SOFTOKEN | - USBx_INTEN_STALLEN | - USBx_INTEN_ERROREN | - USBx_INTEN_USBRSTEN | - USBx_INTEN_SLEEPEN; - - /* "is this necessary?", Paul from PJRC */ - USB0->CTL = USBx_CTL_USBENSOFEN; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Sets the USB address. - * - * @param[in] usbp pointer to the @p USBDriver object - * - * @notapi - */ -void usb_lld_set_address(USBDriver *usbp) { - -#if KINETIS_USB_USE_USB0 - USB0->ADDR = usbp->address&0x7F; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Enables an endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @notapi - */ -void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) { - - if(ep > KINETIS_USB_ENDPOINTS) - return; - - const USBEndpointConfig *epc = usbp->epc[ep]; - uint8_t mask=0; - - if(epc->out_state != NULL) - { - /* OUT Endpoint */ - epc->out_state->odd_even = EVEN; - epc->out_state->data_bank = DATA0; - /* RXe */ - _bdt[BDT_INDEX(ep, RX, EVEN)].desc = BDT_DESC(epc->out_maxsize, DATA0); - _bdt[BDT_INDEX(ep, RX, EVEN)].addr = usb_alloc(epc->out_maxsize); - /* RXo */ - _bdt[BDT_INDEX(ep, RX, ODD)].desc = BDT_DESC(epc->out_maxsize, DATA1); - _bdt[BDT_INDEX(ep, RX, ODD)].addr = usb_alloc(epc->out_maxsize); - /* Enable OUT direction */ - mask |= USBx_ENDPTn_EPRXEN; - } - if(epc->in_state != NULL) - { - /* IN Endpoint */ - epc->in_state->odd_even = EVEN; - epc->in_state->data_bank = DATA0; - /* TXe, not used yet */ - _bdt[BDT_INDEX(ep, TX, EVEN)].desc = 0; - _bdt[BDT_INDEX(ep, TX, EVEN)].addr = usb_alloc(epc->in_maxsize); - /* TXo, not used yet */ - _bdt[BDT_INDEX(ep, TX, ODD)].desc = 0; - _bdt[BDT_INDEX(ep, TX, ODD)].addr = usb_alloc(epc->in_maxsize); - /* Enable IN direction */ - mask |= USBx_ENDPTn_EPTXEN; - } - - /* EPHSHK should be set for CTRL, BULK, INTR not for ISOC*/ - if((epc->ep_mode & USB_EP_MODE_TYPE) != USB_EP_MODE_TYPE_ISOC) - mask |= USBx_ENDPTn_EPHSHK; - /* Endpoint is not a CTRL endpoint, disable SETUP transfers */ - if((epc->ep_mode & USB_EP_MODE_TYPE) != USB_EP_MODE_TYPE_CTRL) - mask |= USBx_ENDPTn_EPCTLDIS; - -#if KINETIS_USB_USE_USB0 - USB0->ENDPT[ep].V = mask; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Disables all the active endpoints except the endpoint zero. - * - * @param[in] usbp pointer to the @p USBDriver object - * - * @notapi - */ -void usb_lld_disable_endpoints(USBDriver *usbp) { - (void)usbp; - uint8_t i; -#if KINETIS_USB_USE_USB0 - for(i=1;iENDPT[i].V = 0; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Returns the status of an OUT endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * @return The endpoint status. - * @retval EP_STATUS_DISABLED The endpoint is not active. - * @retval EP_STATUS_STALLED The endpoint is stalled. - * @retval EP_STATUS_ACTIVE The endpoint is active. - * - * @notapi - */ -usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) { - (void)usbp; -#if KINETIS_USB_USE_USB0 - if(ep > USB_MAX_ENDPOINTS) - return EP_STATUS_DISABLED; - if(!(USB0->ENDPT[ep].V & (USBx_ENDPTn_EPRXEN))) - return EP_STATUS_DISABLED; - else if(USB0->ENDPT[ep].V & USBx_ENDPTn_EPSTALL) - return EP_STATUS_STALLED; - return EP_STATUS_ACTIVE; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Returns the status of an IN endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * @return The endpoint status. - * @retval EP_STATUS_DISABLED The endpoint is not active. - * @retval EP_STATUS_STALLED The endpoint is stalled. - * @retval EP_STATUS_ACTIVE The endpoint is active. - * - * @notapi - */ -usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) { - (void)usbp; - if(ep > USB_MAX_ENDPOINTS) - return EP_STATUS_DISABLED; -#if KINETIS_USB_USE_USB0 - if(!(USB0->ENDPT[ep].V & (USBx_ENDPTn_EPTXEN))) - return EP_STATUS_DISABLED; - else if(USB0->ENDPT[ep].V & USBx_ENDPTn_EPSTALL) - return EP_STATUS_STALLED; - return EP_STATUS_ACTIVE; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Reads a setup packet from the dedicated packet buffer. - * @details This function must be invoked in the context of the @p setup_cb - * callback in order to read the received setup packet. - * @pre In order to use this function the endpoint must have been - * initialized as a control endpoint. - * @post The endpoint is ready to accept another packet. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * @param[out] buf buffer where to copy the packet data - * - * @notapi - */ -void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) { - /* Get the BDT entry */ - USBOutEndpointState *os = usbp->epc[ep]->out_state; - bd_t *bd = (bd_t*)&_bdt[BDT_INDEX(ep, RX, os->odd_even)]; - /* Copy the 8 bytes of data */ - uint8_t n; - for (n = 0; n < 8; n++) { - buf[n] = bd->addr[n]; - } - /* Release the buffer - * Setup packet is always DATA0 - * Initialize buffers so current expects DATA0 & opposite DATA1 */ - bd->desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA0); - _bdt[BDT_INDEX(ep, RX, os->odd_even^ODD)].desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA1); - os->data_bank = DATA1; -} - -/** - * @brief Starts a receive operation on an OUT endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @notapi - */ -void usb_lld_start_out(USBDriver *usbp, usbep_t ep) { - USBOutEndpointState *osp = usbp->epc[ep]->out_state; - /* Transfer initialization.*/ - if (osp->rxsize == 0) /* Special case for zero sized packets.*/ - osp->rxpkts = 1; - else - osp->rxpkts = (uint16_t)((osp->rxsize + usbp->epc[ep]->out_maxsize - 1) / - usbp->epc[ep]->out_maxsize); -} - -/** - * @brief Starts a transmit operation on an IN endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @note Called from ISR and locked zone. - * @notapi - */ -void usb_lld_start_in(USBDriver *usbp, usbep_t ep) { - (void)usbp; - (void)ep; - usb_packet_transmit(usbp,ep,usbp->epc[ep]->in_state->txsize); -} - -/** - * @brief Brings an OUT endpoint in the stalled state. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @notapi - */ -void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) { - (void)usbp; -#if KINETIS_USB_USE_USB0 - USB0->ENDPT[ep].V |= USBx_ENDPTn_EPSTALL; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Brings an IN endpoint in the stalled state. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @notapi - */ -void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) { - (void)usbp; -#if KINETIS_USB_USE_USB0 - USB0->ENDPT[ep].V |= USBx_ENDPTn_EPSTALL; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Brings an OUT endpoint in the active state. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @notapi - */ -void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) { - (void)usbp; -#if KINETIS_USB_USE_USB0 - USB0->ENDPT[ep].V &= ~USBx_ENDPTn_EPSTALL; -#endif /* KINETIS_USB_USE_USB0 */ -} - -/** - * @brief Brings an IN endpoint in the active state. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * - * @notapi - */ -void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) { - (void)usbp; -#if KINETIS_USB_USE_USB0 - USB0->ENDPT[ep].V &= ~USBx_ENDPTn_EPSTALL; -#endif /* KINETIS_USB_USE_USB0 */ -} - -#endif /* HAL_USE_USB */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.h deleted file mode 100644 index 593ef16..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/KINETIS/LLD/hal_usb_lld.h +++ /dev/null @@ -1,428 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde/ - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KINETIS/LLD/usb_lld.h - * @brief KINETIS USB subsystem low level driver header. - * - * @addtogroup USB - * @{ - */ - -#ifndef HAL_USB_LLD_H_ -#define HAL_USB_LLD_H_ - -#if HAL_USE_USB || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Maximum endpoint address. - */ -#define USB_MAX_ENDPOINTS 15 - -/** - * @brief Status stage handling method. - */ -#define USB_EP0_STATUS_STAGE USB_EP0_STATUS_STAGE_SW - -/** - * @brief Address ack handling - */ -#define USB_SET_ADDRESS_ACK_HANDLING USB_SET_ADDRESS_ACK_SW - -/** - * @brief This device requires the address change after the status packet. - */ -#define USB_SET_ADDRESS_MODE USB_LATE_SET_ADDRESS - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief USB1 driver enable switch. - * @details If set to @p TRUE the support for USB1 is included. - * @note The default is @p TRUE. - */ -#if !defined(KINETIS_USB_USE_USB0) || defined(__DOXYGEN__) -#define KINETIS_USB_USE_USB0 FALSE -#endif - -/** - * @brief USB1 interrupt priority level setting. - */ -#if !defined(KINETIS_USB_USB0_IRQ_PRIORITY)|| defined(__DOXYGEN__) -#define KINETIS_USB_USB0_IRQ_PRIORITY 5 -#endif - -#if !defined(KINETIS_USB_ENDPOINTS) || defined(__DOXYGEN__) - #define KINETIS_USB_ENDPOINTS USB_MAX_ENDPOINTS+1 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if KINETIS_USB_USE_USB0 && !KINETIS_HAS_USB -#error "USB not present in the selected device" -#endif - -#if !KINETIS_USB_USE_USB0 -#error "USB driver activated but no USB peripheral assigned" -#endif - -#if KINETIS_USB_USE_USB0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_USB_USB0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to KINETIS_USB_USB0_IRQ_PRIORITY" -#endif - -#if !defined(KINETIS_USB_IRQ_VECTOR) -#error "KINETIS_USB_IRQ_VECTOR not defined" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of an IN endpoint state structure. - */ -typedef struct { - /** - * @brief Requested transmit transfer size. - */ - size_t txsize; - /** - * @brief Transmitted bytes so far. - */ - size_t txcnt; - /** - * @brief Pointer to the transmission linear buffer. - */ - const uint8_t *txbuf; -#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif - /* End of the mandatory fields.*/ - /* */ - bool odd_even; /* ODD / EVEN */ - /* */ - bool data_bank; /* DATA0 / DATA1 */ -} USBInEndpointState; - -/** - * @brief Type of an OUT endpoint state structure. - */ -typedef struct { - /** - * @brief Requested receive transfer size. - */ - size_t rxsize; - /** - * @brief Received bytes so far. - */ - size_t rxcnt; - /** - * @brief Pointer to the receive linear buffer. - */ - uint8_t *rxbuf; -#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif - /* End of the mandatory fields.*/ - /** - * @brief Number of packets to receive. - */ - uint16_t rxpkts; - /* */ - bool odd_even; /* ODD / EVEN */ - /* */ - bool data_bank; /* DATA0 / DATA1 */ -} USBOutEndpointState; - -/** - * @brief Type of an USB endpoint configuration structure. - * @note Platform specific restrictions may apply to endpoints. - */ -typedef struct { - /** - * @brief Type and mode of the endpoint. - */ - uint32_t ep_mode; - /** - * @brief Setup packet notification callback. - * @details This callback is invoked when a setup packet has been - * received. - * @post The application must immediately call @p usbReadPacket() in - * order to access the received packet. - * @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL - * endpoints, it should be set to @p NULL for other endpoint - * types. - */ - usbepcallback_t setup_cb; - /** - * @brief IN endpoint notification callback. - * @details This field must be set to @p NULL if callback is not required. - */ - usbepcallback_t in_cb; - /** - * @brief OUT endpoint notification callback. - * @details This field must be set to @p NULL if callback is not required. - */ - usbepcallback_t out_cb; - /** - * @brief IN endpoint maximum packet size. - * @details This field must be set to zero if the IN endpoint is not used. - */ - uint16_t in_maxsize; - /** - * @brief OUT endpoint maximum packet size. - * @details This field must be set to zero if the OUT endpoint is not used. - */ - uint16_t out_maxsize; - /** - * @brief @p USBEndpointState associated to the IN endpoint. - * @details This field must be set to @p NULL if the IN endpoint is not - * used. - */ - USBInEndpointState *in_state; - /** - * @brief @p USBEndpointState associated to the OUT endpoint. - * @details This field must be set to @p NULL if the OUT endpoint is not - * used. - */ - USBOutEndpointState *out_state; - /* End of the mandatory fields.*/ - /** - * @brief Reserved field, not currently used. - * @note Initialize this field to 1 in order to be forward compatible. - */ - uint16_t ep_buffers; - /** - * @brief Pointer to a buffer for setup packets. - * @details Setup packets require a dedicated 8-bytes buffer, set this - * field to @p NULL for non-control endpoints. - */ - uint8_t *setup_buf; -} USBEndpointConfig; - -/** - * @brief Type of an USB driver configuration structure. - */ -typedef struct { - /** - * @brief USB events callback. - * @details This callback is invoked when an USB driver event is registered. - */ - usbeventcb_t event_cb; - /** - * @brief Device GET_DESCRIPTOR request callback. - * @note This callback is mandatory and cannot be set to @p NULL. - */ - usbgetdescriptor_t get_descriptor_cb; - /** - * @brief Requests hook callback. - * @details This hook allows to be notified of standard requests or to - * handle non standard requests. - */ - usbreqhandler_t requests_hook_cb; - /** - * @brief Start Of Frame callback. - */ - usbcallback_t sof_cb; - /* End of the mandatory fields.*/ -} USBConfig; - -/** - * @brief Structure representing an USB driver. - */ -struct USBDriver { - /** - * @brief Driver state. - */ - usbstate_t state; - /** - * @brief Current configuration data. - */ - const USBConfig *config; - /** - * @brief Bit map of the transmitting IN endpoints. - */ - uint16_t transmitting; - /** - * @brief Bit map of the receiving OUT endpoints. - */ - uint16_t receiving; - /** - * @brief Active endpoints configurations. - */ - const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1]; - /** - * @brief Fields available to user, it can be used to associate an - * application-defined handler to an IN endpoint. - * @note The base index is one, the endpoint zero does not have a - * reserved element in this array. - */ - void *in_params[USB_MAX_ENDPOINTS]; - /** - * @brief Fields available to user, it can be used to associate an - * application-defined handler to an OUT endpoint. - * @note The base index is one, the endpoint zero does not have a - * reserved element in this array. - */ - void *out_params[USB_MAX_ENDPOINTS]; - /** - * @brief Endpoint 0 state. - */ - usbep0state_t ep0state; - /** - * @brief Next position in the buffer to be transferred through endpoint 0. - */ - uint8_t *ep0next; - /** - * @brief Number of bytes yet to be transferred through endpoint 0. - */ - size_t ep0n; - /** - * @brief Endpoint 0 end transaction callback. - */ - usbcallback_t ep0endcb; - /** - * @brief Setup packet buffer. - */ - uint8_t setup[8]; - /** - * @brief Current USB device status. - */ - uint16_t status; - /** - * @brief Assigned USB address. - */ - uint8_t address; - /** - * @brief Current USB device configuration. - */ - uint8_t configuration; -#if defined(USB_DRIVER_EXT_FIELDS) - USB_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the next address in the packet memory. - */ - uint32_t pmnext; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Returns the current frame number. - * - * @param[in] usbp pointer to the @p USBDriver object - * @return The current frame number. - * - * @notapi - */ -#define usb_lld_get_frame_number(usbp) ((USB0->FRMNUMH<<8)|USB0->FRMNUML) - -/** - * @brief Returns the exact size of a receive transaction. - * @details The received size can be different from the size specified in - * @p usbStartReceiveI() because the last packet could have a size - * different from the expected one. - * @pre The OUT endpoint must have been configured in transaction mode - * in order to use this function. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep endpoint number - * @return Received data size. - * - * @notapi - */ -#define usb_lld_get_transaction_size(usbp, ep) \ - ((usbp)->epc[ep]->out_state->rxcnt) - -/** - * @brief Connects the USB device. - * - * @api - */ -#if !defined(usb_lld_connect_bus) -#define usb_lld_connect_bus(usbp) (USB0->CONTROL |= USBx_CONTROL_DPPULLUPNONOTG) -#endif - -/** - * @brief Disconnect the USB device. - * - * @api - */ -#if !defined(usb_lld_disconnect_bus) -/* Writing to USB0->CONTROL causes an unhandled exception when USB module is not clocked. */ -#if KINETIS_USB0_IS_USBOTG -#define usb_lld_disconnect_bus(usbp) if(SIM->SCGC4 & SIM_SCGC4_USBOTG) {USB0->CONTROL &= ~USBx_CONTROL_DPPULLUPNONOTG;} else {} -#else /* KINETIS_USB0_IS_USBOTG */ -#define usb_lld_disconnect_bus(usbp) if(SIM->SCGC4 & SIM_SCGC4_USBFS) {USB0->CONTROL &= ~USBx_CONTROL_DPPULLUPNONOTG;} else {} -#endif /* KINETIS_USB0_IS_USBOTG */ -#endif - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if KINETIS_USB_USE_USB0 && !defined(__DOXYGEN__) -extern USBDriver USBD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void usb_lld_init(void); - void usb_lld_start(USBDriver *usbp); - void usb_lld_stop(USBDriver *usbp); - void usb_lld_reset(USBDriver *usbp); - void usb_lld_set_address(USBDriver *usbp); - void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep); - void usb_lld_disable_endpoints(USBDriver *usbp); - usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep); - usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep); - void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf); - void usb_lld_start_out(USBDriver *usbp, usbep_t ep); - void usb_lld_start_in(USBDriver *usbp, usbep_t ep); - void usb_lld_stall_out(USBDriver *usbp, usbep_t ep); - void usb_lld_stall_in(USBDriver *usbp, usbep_t ep); - void usb_lld_clear_out(USBDriver *usbp, usbep_t ep); - void usb_lld_clear_in(USBDriver *usbp, usbep_t ep); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_USB */ - -#endif /* HAL_USB_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.c deleted file mode 100644 index 43e1d6c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X hal_dma_lld.c - * @brief MSP430X DMA subsystem low level driver source. - * - * @addtogroup MSP430X_DMA - * @{ - */ - -#include "hal.h" -#include "ch.h" -#include "hal_dma_lld.h" - -#if (HAL_USE_DMA == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -static msp430x_dma_ch_reg_t * const dma_channels = - (msp430x_dma_ch_reg_t *)&DMA0CTL; - -static msp430x_dma_cb_t callbacks[MSP430X_DMA_CHANNELS]; -#if CH_CFG_USE_SEMAPHORES -static semaphore_t dma_lock; -#endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Set a DMA trigger using an index. - * - * @param[in] index The index of the DMA channel whose trigger is set. - * @param[in] trigger The trigger to use. - * @note This is all to get around weird MSP behavior when writing to memory- - * mapped registers using bytewise instructions. - */ -static void dma_trigger_set(uint8_t index, uint8_t trigger) { - uint16_t * ctl = ((uint16_t *)((uintptr_t)(&DMACTL0)) + (index / 2)); - *ctl &= 0xFF00 >> (8 * (index % 2)); - *ctl |= trigger << (8 * (index % 2)); -} -static void init_request(const msp430x_dma_req_t * request, uint8_t index) { - - dma_trigger_set(index, request->trigger); - callbacks[index] = request->callback; - msp430x_dma_ch_reg_t * ch = &dma_channels[index]; - ch->sa = (uintptr_t)request->source_addr; - ch->da = (uintptr_t)request->dest_addr; - ch->sz = request->size; - ch->ctl = DMAREQ | DMAIE | DMAEN | request->data_mode | request->addr_mode | - request->transfer_mode; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -PORT_IRQ_HANDLER(DMA_VECTOR) { - uint8_t index; - OSAL_IRQ_PROLOGUE(); - - index = (DMAIV >> 1) - 1; - - if (index < MSP430X_DMA_CHANNELS) { -#if CH_CFG_USE_SEMAPHORES - chSemSignalI(&dma_lock); -#endif - - msp430x_dma_cb_t * cb = &callbacks[index]; - - /* WARNING: CALLBACKS ARE CALLED IN AN ISR CONTEXT! */ - if (cb->callback != NULL) { - cb->callback(cb->args); - } - } - - OSAL_IRQ_EPILOGUE(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Initialize the DMA engine. - * - * @init - */ -void dmaInit(void) { -#if CH_CFG_USE_SEMAPHORES - chSemObjectInit(&dma_lock, MSP430X_DMA_CHANNELS); -#endif -} - -/** - * @brief Requests a DMA transfer operation from the DMA engine. - * @note The DMA engine uses unclaimed DMA channels to provide DMA services - * for one-off or infrequent uses. If all channels are busy, and - * semaphores are enabled, the calling thread will sleep until a - * channel is available or the request times out. If semaphores are - * disabled, the calling thread will busy-wait instead of sleeping. - */ -bool dmaRequest(msp430x_dma_req_t * request, systime_t timeout) { -/* Check if a DMA channel is available */ -#if CH_CFG_USE_SEMAPHORES - msg_t semresult = chSemWaitTimeout(&dma_lock, timeout); - if (semresult != MSG_OK) - return true; -#endif - -#if !(CH_CFG_USE_SEMAPHORES) - systime_t start = chVTGetSystemTimeX(); - - do { -#endif - /* Grab the correct DMA channel to use */ - int i = 0; - for (i = 0; i < MSP430X_DMA_CHANNELS; i++) { - if (!(dma_channels[i].ctl & DMAEN)) { - break; - } - } -#if !(CH_CFG_USE_SEMAPHORES) - while (chVTTimeElapsedSinceX(start) < timeout) - ; -#endif - -#if !(CH_CFG_USE_SEMAPHORES) - if (i == MSP430X_DMA_CHANNELS) { - return true; - } -#endif - - /* Make the request */ - init_request(request, i); - - return false; - } - - /** - * @brief Acquires exclusive control of a DMA channel. - * @pre The channel must not be already acquired or an error is returned. - * @note If the channel is in use by the DMA engine, blocks until acquired. - * @post This channel must be interacted with using only the functions - * defined in this module. - * - * @param[out] channel The channel handle. Must be pre-allocated. - * @param[in] index The index of the channel (< MSP430X_DMA_CHANNELS). - * @return The operation status. - * @retval false no error, channel acquired. - * @retval true error, channel already acquired. - */ - bool dmaAcquire(msp430x_dma_ch_t * channel, uint8_t index) { - /* Acquire the channel in an idle mode */ - - /* Is the channel already acquired? */ - osalDbgAssert(index < MSP430X_DMA_CHANNELS, "invalid channel index"); - if (dma_channels[index].ctl & DMADT_4) { - return true; - } - -/* Increment the DMA counter */ -#if CH_CFG_USE_SEMAPHORES - msg_t semresult = chSemWait(&dma_lock); - if (semresult != MSG_OK) - return true; -#endif - - while (dma_channels[index].ctl & DMAEN) - ; - - dma_trigger_set(index, DMA_TRIGGER_MNEM(DMAREQ)); - dma_channels[index].sz = 0; - dma_channels[index].ctl = DMAEN | DMAABORT | DMADT_4; - - channel->registers = dma_channels + index; - channel->index = index; - channel->cb = callbacks + index; - - return false; - } - - /** - * @brief Initiates a DMA transfer operation using an acquired channel. - * @pre The channel must have been acquired using @p dmaAcquire(). - * - * @param[in] channel pointer to a DMA channel from @p dmaAcquire(). - * @param[in] request pointer to a DMA request object. - */ - void dmaTransfer(msp430x_dma_ch_t * channel, msp430x_dma_req_t * request) { - - dma_trigger_set(channel->index, request->trigger); - /**(channel->ctl) = request->trigger;*/ - - channel->cb->callback = request->callback.callback; - channel->cb->args = request->callback.args; - - chSysLock(); - channel->registers->ctl &= (~DMAEN); - channel->registers->sa = (uintptr_t)request->source_addr; - channel->registers->da = (uintptr_t)request->dest_addr; - channel->registers->sz = request->size; - channel->registers->ctl = DMAIE | request->data_mode | request->addr_mode | - request->transfer_mode | DMADT_4 | DMAEN | - DMAREQ; /* repeated transfers */ - chSysUnlock(); - } - - /** - * @brief Releases exclusive control of a DMA channel. - * @details The channel is released from control and returned to the DMA - * engine - * pool. Trying to release an unallocated channel is an illegal - * operation and is trapped if assertions are enabled. - * @pre The channel must have been acquired using @p dmaAcquire(). - * @post The channel is returned to the DMA engine pool. - */ - void dmaRelease(msp430x_dma_ch_t * channel) { - - osalDbgCheck(channel != NULL); - - /* Release the channel in an idle mode */ - channel->registers->ctl = DMAABORT; - -/* release the DMA counter */ -#if CH_CFG_USE_SEMAPHORES - chSemSignal(&dma_lock); -#endif - } - -#endif /* HAL_USE_DMA == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.h deleted file mode 100644 index d1495d2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_dma_lld.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_dma_lld.c - * @brief MSP430X DMA subsystem low level driver header. - * @note This driver is used as a DMA engine for the other - * low level drivers. - * - * @addtogroup MSP430X_DMA - * @{ - */ - -#ifndef HAL_MSP430X_DMA_H -#define HAL_MSP430X_DMA_H - -#if (HAL_USE_DMA == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define MSP430X_DMA_SINGLE DMADT_0 -#define MSP430X_DMA_BLOCK DMADT_1 -#define MSP430X_DMA_BURST DMADT_2 - -#define MSP430X_DMA_SRCINCR DMASRCINCR_3 -#define MSP430X_DMA_SRCDECR DMASRCINCR_2 -#define MSP430X_DMA_DSTINCR DMADSTINCR_3 -#define MSP430X_DMA_DSTDECR DMADSTINCR_2 - -#define MSP430X_DMA_SRCBYTE DMASRCBYTE -#define MSP430X_DMA_DSTBYTE DMADSTBYTE -#define MSP430X_DMA_SRCWORD 0 -#define MSP430X_DMA_DSTWORD 0 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !defined(DMA_BASE) && !defined(MSP430X_DMA_SOFTWARE) -#error "The MSP430 device in use does not support DMA. Explicitly enable" -#error "software emulation by defining MSP430X_DMA_SOFTWARE." -#endif - -#if defined(__MSP430_HAS_DMAX_1__) || defined(__MSP430X_HAS_DMA_1__) -#define MSP430X_DMA_CHANNELS 1 -#elif defined(__MSP430_HAS_DMAX_3__) || defined(__MSP430X_HAS_DMA_3__) -#define MSP430X_DMA_CHANNELS 3 -#elif defined(__MSP430_HAS_DMAX_6__) || defined(__MSP430X_HAS_DMA_6__) -#define MSP430X_DMA_CHANNELS 6 -#else -#error "Unexpected error - how many DMA channels does your MSP have?" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of DMA callback function pointer. - */ -typedef void (*msp430x_dma_cbp_t)(void * args); - -/** - * @brief DMA callback, function and argument. - */ -typedef struct { - msp430x_dma_cbp_t callback; /**< @brief Callback function pointer */ - void * args; /**< @brief Callback function arguments */ -} msp430x_dma_cb_t; - -/** - * @brief MSP430X DMA request structure. - */ -typedef struct { - const void * source_addr; /**< @brief Source address */ - void * dest_addr; /**< @brief Destination address */ - uint16_t size; /**< @brief Number of values to transfer */ - uint16_t addr_mode; /**< @brief Address manipulation mode */ - uint16_t data_mode; /**< @brief Data sizes (b2b, w2w, b2w, w2b) */ - uint16_t transfer_mode; /**< @brief Transfer mode (single, block, burst) */ - uint16_t trigger; /**< @brief Triggering event (see datasheet) */ - msp430x_dma_cb_t callback; /**< @brief Callback function and arguments */ -} msp430x_dma_req_t; - -/** - * @brief MSP430X DMA channel register structure. - */ -typedef struct { - volatile uint16_t ctl; /**< @brief Control register */ - volatile uint32_t sa; /**< @brief Source address register */ - volatile uint32_t da; /**< @brief Destination address register */ - volatile uint16_t sz; /**< @brief Size register */ - volatile uint16_t pad1; - volatile uint16_t pad2; -} msp430x_dma_ch_reg_t; - -/** - * @brief MSP430X DMA controller register structure. - */ -typedef struct { - volatile uint8_t tsel0; /**< @brief Trigger select for channel 0 */ - volatile uint8_t tsel1; /**< @brief Trigger select for channel 1 */ - volatile uint8_t tsel2; /**< @brief Trigger select for channel 2 */ - volatile uint8_t tsel3; /**< @brief Trigger select for channel 3 */ - volatile uint8_t tsel4; /**< @brief Trigger select for channel 4 */ - volatile uint8_t tsel5; /**< @brief Trigger select for channel 5 */ - volatile uint8_t tsel6; /**< @brief Trigger select for channel 6 */ - volatile uint8_t tsel7; /**< @brief Trigger select for channel 7 */ - volatile uint16_t ctl4; /**< @brief Controller register 4 */ -} msp430x_dma_ctl_reg_t; - -/** - * @brief MSP430X DMA channel structure. - */ -typedef struct { - msp430x_dma_ch_reg_t * registers; /**< @brief Pointer to channel registers */ - uint8_t index; /**< @brief Index of channel trigger control register */ - msp430x_dma_cb_t * cb; /**< @brief Pointer to callback function and args */ -} msp430x_dma_ch_t; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Identifies a DMA trigger using a mnemonic. - * - * @param[in] mnem The mnemonic for the trigger, e.g. UCA0RXIFG to trigger - * on UART receive. - */ -#define DMA_TRIGGER_MNEM(mnem) DMA0TSEL__##mnem - -/** @} */ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif -void dmaInit(void); -bool dmaRequest(msp430x_dma_req_t * request, systime_t timeout); -bool dmaAcquire(msp430x_dma_ch_t * channel, uint8_t index); -void dmaTransfer(msp430x_dma_ch_t * channel, msp430x_dma_req_t * request); -void dmaRelease(msp430x_dma_ch_t * channel); - -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_DMA == true */ - -#endif /* HAL_MSP430X_DMA_H */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.c deleted file mode 100644 index 872fe97..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_lld.c - * @brief MSP430X HAL subsystem low level driver source. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * - * @notapi - */ -void hal_lld_init(void) { - /* Disable watchdog */ - /* TODO Real watchdog support */ - WDTCTL = WDTPW | WDTHOLD; - /* Init clock system */ - CSCTL0 = CSKEY; /* unlock clock system */ - CSCTL1 = MSP430X_DCOSEL; - CSCTL2 = (MSP430X_ACLK_SRC << 8) | (MSP430X_SMCLK_SRC << 4) | (MSP430X_MCLK_SRC); - CSCTL3 = (DIVIDER(MSP430X_ACLK_DIV) << 8) | (DIVIDER(MSP430X_SMCLK_DIV) << 4) | (DIVIDER(MSP430X_MCLK_DIV)); - CSCTL4 = (MSP430X_HFXTCLK_DRIVE << 14) | (MSP430X_HFXTCLK_BYPASS << 12) | (MSP430X_HFFREQ << 10) | HFXTOFF | \ - (MSP430X_LFXTCLK_DRIVE << 6) | (MSP430X_LFXTCLK_BYPASS << 4) | VLOOFF | LFXTOFF; - CSCTL6 = (MODCLKREQEN) | (SMCLKREQEN) | (MCLKREQEN) | (ACLKREQEN); - #if defined(MSP430X_USE_HFXT) && defined(MSP430X_USE_LFXT) - do { - CSCTL5 &= ~(HFXTOFFG | LFXTOFFG); - SFRIFG1 &= ~OFIFG; - } while (SFRIFG1 & OFIFG); - #elif defined(MSP430X_USE_HFXT) - do { - CSCTL5 &= ~(HFXTOFFG); - SFRIFG1 &= ~OFIFG; - } while (SFRIFG1 & OFIFG); - #elif defined(MSP430X_USE_LFXT) - do { - CSCTL5 &= ~(LFXTOFFG); - SFRIFG1 &= ~OFIFG; - } while (SFRIFG1 & OFIFG); - #endif - CSCTL0_H = 0xFF; /* Lock clock system */ -} - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.h deleted file mode 100644 index 9549453..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_lld.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_lld.h - * @brief MSP430X HAL subsystem low level driver header. - * - * @addtogroup HAL - * @{ - */ - -#ifndef _HAL_LLD_H_ -#define _HAL_LLD_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Defines the support for realtime counters in the HAL. - */ -/* someday*/ -#define HAL_IMPLEMENTS_COUNTERS FALSE - -/** - * @name Platform identification macros - * @{ - */ -#define PLATFORM_NAME "MSP430X" -/** @} */ - -#define MSP430X_LFXTCLK 0 -#define MSP430X_VLOCLK 1 -#define MSP430X_LFMODCLK 2 -#define MSP430X_DCOCLK 3 -#define MSP430X_MODCLK 4 -#define MSP430X_HFXTCLK 5 - -#if !defined(MSP430X_LFXTCLK_FREQ) - #define MSP430X_LFXTCLK_FREQ 32768 - #warning "LFXTCLK freqency not defined - assuming 32768 Hz" -#endif -#define MSP430X_VLOCLK_FREQ 10000 -#define MSP430X_MODCLK_FREQ 5000000 -#define MSP430X_LFMODCLK_FREQ (MSP430X_MODCLK_FREQ/128) -#if !defined(MSP430X_DCOCLK_FREQ) - #define MSP430X_DCOCLK_FREQ 8000000 - #warning "DCOCLK frequency not defined - assuming 8 MHz" -#endif -#if !defined(MSP430X_HFXTCLK_FREQ) - #define MSP430X_HFXTCLK_FREQ 0 - #warning "HFXTCLK frequency not defined - assuming disabled" -#endif - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name MSP430X configuration options - * @{ - */ - -/* Clock dividers */ -#if !defined(MSP430X_ACLK_DIV) - #define MSP430X_ACLK_DIV 1 -#endif -#if !defined(MSP430X_MCLK_DIV) - #define MSP430X_MCLK_DIV 8 -#endif -#if !defined(MSP430X_SMCLK_DIV) - #define MSP430X_SMCLK_DIV 8 -#endif - -/* Clock sources */ -#if !defined(MSP430X_ACLK_SRC) - #define MSP430X_ACLK_SRC MSP430X_LFXTCLK -#endif -#if !defined(MSP430X_MCLK_SRC) - #define MSP430X_MCLK_SRC MSP430X_DCOCLK -#endif -#if !defined(MSP430X_SMCLK_SRC) - #define MSP430X_SMCLK_SRC MSP430X_DCOCLK -#endif - -/* HFXT and LFXT settings */ -#if !defined(MSP430X_LFXTCLK_BYPASS) - #define MSP430X_LFXTCLK_BYPASS 0 -#endif -#if !defined(MSP430X_LFXTCLK_DRIVE) - #define MSP430X_LFXTCLK_DRIVE 3 -#endif -#if !defined(MSP430X_HFXTCLK_BYPASS) - #define MSP430X_HFXTCLK_BYPASS 0 -#endif -#if !defined(MSP430X_HFXTCLK_DRIVE) - #define MSP430X_HFXTCLK_DRIVE 3 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/* - * Configuration-related checks. - */ -#if (MSP430X_ACLK_SRC == MSP430X_LFXTCLK) || (MSP430X_MCLK_SRC == MSP430X_LFXTCLK) || (MSP430X_SMCLK_SRC == MSP430X_LFXTCLK) - #define MSP430X_USE_LFXTCLK -#endif -#if (MSP430X_MCLK_SRC == MSP430X_HFXTCLK) || (MSP430X_SMCLK_SRC == MSP430X_HFXTCLK) - #define MSP430X_USE_HFXTCLK -#endif - -#if defined(MSP430X_USE_HFXTCLK) && MSP430X_HFXTCLK_FREQ == 0 - #error "HFXT requested as clock source but disabled" -#endif - -/* Clock speeds */ -#if (MSP430X_ACLK_SRC == MSP430X_LFXTCLK) - #define MSP430X_ACLK_FREQ (MSP430X_LFXTCLK_FREQ / MSP430X_ACLK_DIV) -#elif (MSP430X_ACLK_SRC == MSP430X_VLOCLK) - #define MSP430X_ACLK_FREQ (MSP430X_VLOCLK_FREQ / MSP430X_ACLK_DIV) -#elif (MSP430X_ACLK_SRC == MSP430X_LFMODCLK) - #define MSP430X_ACLK_FREQ (MSP430X_LFMODCLK_FREQ / MSP430X_ACLK_DIV) -#else - #error "ACLK source invalid!" -#endif -#if (MSP430X_MCLK_SRC == MSP430X_LFXTCLK) - #define MSP430X_MCLK_FREQ (MSP430X_LFXTCLK_FREQ / MSP430X_MCLK_DIV) -#elif (MSP430X_MCLK_SRC == MSP430X_VLOCLK) - #define MSP430X_MCLK_FREQ (MSP430X_VLOCLK_FREQ / MSP430X_MCLK_DIV) -#elif (MSP430X_MCLK_SRC == MSP430X_LFMODCLK) - #define MSP430X_MCLK_FREQ (MSP430X_LFMODCLK_FREQ / MSP430X_MCLK_DIV) -#elif (MSP430X_MCLK_SRC == MSP430X_DCOCLK) - #define MSP430X_MCLK_FREQ (MSP430X_DCOCLK_FREQ / MSP430X_MCLK_DIV) -#elif (MSP430X_MCLK_SRC == MSP430X_MODCLK) - #define MSP430X_MCLK_FREQ (MSP430X_MODCLK_FREQ / MSP430X_MCLK_DIV) -#elif (MSP430X_MCLK_SRC == MSP430X_HFXTCLK) - #define MSP430X_MCLK_FREQ (MSP430X_HFXTCLK_FREQ / MSP430X_MCLK_DIV) -#else - #error "MCLK source invalid!" -#endif -#if (MSP430X_SMCLK_SRC == MSP430X_LFXTCLK) - #define MSP430X_SMCLK_FREQ (MSP430X_LFXTCLK_FREQ / MSP430X_SMCLK_DIV) -#elif (MSP430X_SMCLK_SRC == MSP430X_VLOCLK) - #define MSP430X_SMCLK_FREQ (MSP430X_VLOCLK_FREQ / MSP430X_SMCLK_DIV) -#elif (MSP430X_SMCLK_SRC == MSP430X_LFMODCLK) - #define MSP430X_SMCLK_FREQ (MSP430X_LFMODCLK_FREQ / MSP430X_SMCLK_DIV) -#elif (MSP430X_SMCLK_SRC == MSP430X_DCOCLK) - #define MSP430X_SMCLK_FREQ (MSP430X_DCOCLK_FREQ / MSP430X_SMCLK_DIV) -#elif (MSP430X_SMCLK_SRC == MSP430X_MODCLK) - #define MSP430X_SMCLK_FREQ (MSP430X_MODCLK_FREQ / MSP430X_SMCLK_DIV) -#elif (MSP430X_SMCLK_SRC == MSP430X_HFXTCLK) - #define MSP430X_SMCLK_FREQ (MSP430X_HFXTCLK_FREQ / MSP430X_SMCLK_DIV) -#else - #error "SMCLK source invalid!" -#endif - -#if !defined(MSP430X_MCUCONF) -#error "Using an incorrect mcuconf.h file, MSP430X_MCUCONF not defined" -#endif - -/* HFXT-specific settings */ -#if MSP430X_HFXTCLK_FREQ <= 4000000 - #define MSP430X_HFFREQ HFFREQ_0 -#elif MSP430X_HFXTCLK_FREQ <= 8000000 - #define MSP430X_HFFREQ HFFREQ_1 -#elif MSP430X_HFXTCLK_FREQ <= 16000000 - #define MSP430X_HFFREQ HFFREQ_2 -#elif MSP430X_HFXTCLK_FREQ <= 24000000 - #define MSP430X_HFFREQ HFFREQ_3 -#else - #error "HFXT frequency too high - must be <= 24000000" -#endif - -/* DCO-specific settings */ -#if MSP430X_DCOCLK_FREQ == 1000000 - #define MSP430X_DCOSEL DCOFSEL_0 -#elif MSP430X_DCOCLK_FREQ == 2670000 - #define MSP430X_DCOSEL DCOFSEL_1 -#elif MSP430X_DCOCLK_FREQ == 3330000 - #define MSP430X_DCOSEL DCOFSEL_2 -#elif MSP430X_DCOCLK_FREQ == 4000000 - #define MSP430X_DCOSEL DCOFSEL_3 -#elif MSP430X_DCOCLK_FREQ == 5330000 - #define MSP430X_DCOSEL DCOFSEL_4 -#elif MSP430X_DCOCLK_FREQ == 6670000 - #define MSP430X_DCOSEL DCOFSEL_5 -#elif MSP430X_DCOCLK_FREQ == 8000000 - #define MSP430X_DCOSEL DCOFSEL_6 -#elif MSP430X_DCOCLK_FREQ == 16000000 - #define MSP430X_DCOSEL (DCORSEL | DCOFSEL_4) -#elif MSP430X_DCOCLK_FREQ == 21000000 - #define MSP430X_DCOSEL (DCORSEL | DCOFSEL_5) -#elif MSP430X_DCOCLK_FREQ == 24000000 - #define MSP430X_DCOSEL (DCORSEL | DCOFSEL_6) -#else - #error "DCO frequency invalid" -#endif - -#if MSP430X_LFXTCLK_FREQ > 50000 - #error "LFXT frequency too high - must be <= 5000" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -#define DIVIDER(x) DIV_HELPER(x) -#define DIV_HELPER(x) DIVM__ ## x - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* _HAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.c deleted file mode 100644 index 97ad170..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_pal_lld.c - * @brief MSP430X PAL subsystem low level driver source. - * - * @addtogroup PAL - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief MSP430X I/O ports configuration. - * @details GPIO registers initialization - * - * @param[in] config the MSP430X ports configuration - * - * @notapi - */ -void _pal_lld_init(const PALConfig *config) { - -#if defined(PA_BASE) || defined(__DOXYGEN__) - PAOUT = config->porta.out; - PADIR = config->porta.dir; - PAREN = config->porta.ren; - PASEL0 = config->porta.sel0; - PASEL1 = config->porta.sel1; - PAIES = config->porta.ies; - PAIE = config->porta.ie; - PAIFG = 0; -#endif -#if defined(PB_BASE) || defined(__DOXYGEN__) - PBOUT = config->portb.out; - PBDIR = config->portb.dir; - PBREN = config->portb.ren; - PBSEL0 = config->portb.sel0; - PBSEL1 = config->portb.sel1; - PBIES = config->portb.ies; - PBIE = config->portb.ie; - PBIFG = 0; -#endif -#if defined(PC_BASE) || defined(__DOXYGEN__) - PCOUT = config->portc.out; - PCDIR = config->portc.dir; - PCREN = config->portc.ren; - PCSEL0 = config->portc.sel0; - PCSEL1 = config->portc.sel1; -#if defined(PCIE) || defined(__DOXYGEN__) - PCIES = config->portc.ies; - PCIE = config->portc.ie; - PCIFG = 0; -#endif -#endif -#if defined(PD_BASE) || defined(__DOXYGEN__) - PDOUT = config->portd.out; - PDDIR = config->portd.dir; - PDREN = config->portd.ren; - PDSEL0 = config->portd.sel0; - PDSEL1 = config->portd.sel1; -#if defined(PDIE) || defined(__DOXYGEN__) - PDIES = config->portd.ies; - PDIE = config->portd.ie; - PDIFG = 0; -#endif -#endif -#if defined(PE_BASE) || defined(__DOXYGEN__) - PEOUT = config->porte.out; - PEDIR = config->porte.dir; - PEREN = config->porte.ren; - PESEL0 = config->porte.sel0; - PESEL1 = config->porte.sel1; -#if defined(PEIE) || defined(__DOXYGEN__) - PEIES = config->porte.ies; - PEIE = config->porte.ie; - PEIFG = 0; -#endif -#endif -#if defined(PF_BASE) || defined(__DOXYGEN__) - PFOUT = config->portf.out; - PFDIR = config->portf.dir; - PFREN = config->portf.ren; - PFSEL0 = config->portf.sel0; - PFSEL1 = config->portf.sel1; -#if defined(PFIE) || defined(__DOXYGEN__) - PFIES = config->portf.ies; - PFIE = config->portf.ie; - PFIFG = 0; -#endif -#endif - PJOUT = config->portj.out; - PJDIR = config->portj.dir; - PJREN = config->portj.ren; - PJSEL0 = config->portj.sel0; - PJSEL1 = config->portj.sel1; - - PM5CTL0 &= ~LOCKLPM5; -} - -/** - * @brief Pads mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * @note @p PAL_MODE_UNCONNECTED is implemented as input with pullup. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @notapi - */ -void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode) { - - switch (mode) { - case PAL_MODE_RESET: - case PAL_MODE_INPUT: - port->dir &= ~mask; - port->ren &= ~mask; - if ((port->sel0 & mask) && (port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 &= ~mask; - port->sel1 &= ~mask; - } - break; - case PAL_MODE_UNCONNECTED: - case PAL_MODE_INPUT_PULLUP: - port->dir &= ~mask; - port->ren |= mask; - port->out |= mask; - if ((port->sel0 & mask) && (port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 &= ~mask; - port->sel1 &= ~mask; - } - break; - case PAL_MODE_INPUT_PULLDOWN: - port->dir &= ~mask; - port->ren |= mask; - port->out &= ~mask; - if ((port->sel0 & mask) && (port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 &= ~mask; - port->sel1 &= ~mask; - } - break; - case PAL_MODE_OUTPUT_PUSHPULL: - port->dir |= mask; - if ((port->sel0 & mask) && (port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 &= ~mask; - port->sel1 &= ~mask; - } - break; - case PAL_MSP430X_ALTERNATE_1: - if (!(port->sel0 & mask) && (port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 |= mask; - port->sel1 &= ~mask; - } - break; - case PAL_MSP430X_ALTERNATE_2: - if ((port->sel0 & mask) && !(port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 &= ~mask; - port->sel1 |= mask; - } - break; - case PAL_MSP430X_ALTERNATE_3: - if (!(port->sel0 & mask) && !(port->sel1 & mask)) - port->selc = mask; - else { - port->sel0 |= mask; - port->sel1 |= mask; - } - break; - } -} - -#endif /* HAL_USE_PAL == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.h deleted file mode 100644 index 0b6363b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_pal_lld.h +++ /dev/null @@ -1,385 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_pal_lld.h - * @brief MSP430X PAL subsystem low level driver header. - * - * @addtogroup PAL - * @{ - */ - -#ifndef HAL_PAL_LLD_H -#define HAL_PAL_LLD_H - -#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Unsupported modes and specific modes */ -/*===========================================================================*/ - -#undef PAL_MODE_INPUT_ANALOG /* configure this through the ALTERNATE macros */ -#undef PAL_MODE_OUTPUT_OPENDRAIN - -/** - * @name MSP430X-specific I/O mode flags - * @{ - */ - -/** - * @brief Alternate mode 1 - */ -#define PAL_MSP430X_ALTERNATE_1 8 - -/** - * @brief Alternate mode 2 - */ -#define PAL_MSP430X_ALTERNATE_2 9 - -/** - * @brief Alternate mode 3 - */ -#define PAL_MSP430X_ALTERNATE_3 10 - -#define ALTERNATE_HELP(n) (PAL_MSP430X_ALTERNATE_##n) -/** - * @brief Alternate function. - * - * @param[in] n alternate function selector - 1 through 3 - */ -#define PAL_MODE_ALTERNATE(n) (ALTERNATE_HELP(n)) - -/** @} */ - -/*===========================================================================*/ -/* I/O Ports Types and constants. */ -/*===========================================================================*/ - -/** - * @name Port related definitions - * @{ - */ -/** - * @brief Width, in bits, of an I/O port. - */ -#define PAL_IOPORTS_WIDTH 16U - -/** - * @brief Whole port mask. - * @details This macro specifies all the valid bits into a port. - */ -#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFU) - -/** @} */ - -/** - * @name Line handling macros - * @{ - */ -/** - * @brief Forms a line identifier. - * @details A port/pad pair are encoded into an @p ioline_t type. The encoding - * of this type is platform-dependent. - * @note In this driver the pad number is encoded in the upper 4 bits of - * the GPIO address which are guaranteed to be zero. - */ -#define PAL_LINE(port, pad) \ - ((ioline_t)((uint16_t)(port)) | (((uint16_t)(pad)) << 12)) - -/** - * @brief Decodes a port identifier from a line identifier. - */ -#define PAL_PORT(line) \ - ((msp430x_gpio_registers_t *)(((uint16_t)(line)) & 0x0FFFU)) - -/** - * @brief Decodes a pad identifier from a line identifier. - */ -#define PAL_PAD(line) ((uint16_t)((uint16_t)(line) >> 12)) - -/** - * @brief Value identifying an invalid line. - */ -#define PAL_NOLINE 0U -/** @} */ - -/** - * @brief MSP430X register initialization - */ -typedef struct { - /** Initial value for OUT register.*/ - uint16_t out; - /** Initial value for DIR register.*/ - uint16_t dir; - /** Initial value for REN register.*/ - uint16_t ren; - /** Initial value for SEL0 register.*/ - uint16_t sel0; - /** Initial value for SEL1 register.*/ - uint16_t sel1; - /** Initial value for IES register.*/ - uint16_t ies; - /** Initial value for IE register.*/ - uint16_t ie; -} msp430x_gpio_setup_t; - -/** - * @brief MSP430X registers block - * @note Some ports do not support all of these fields. - */ -typedef struct { - volatile uint16_t in; - volatile uint16_t out; - volatile uint16_t dir; - volatile uint16_t _padding; - volatile uint16_t ren; - volatile uint16_t sel0; - volatile uint16_t sel1; - volatile uint16_t _padding1; - volatile uint16_t _padding2; - volatile uint16_t _padding3; - volatile uint16_t _padding4; - volatile uint16_t selc; - volatile uint16_t ies; - volatile uint16_t ie; - volatile uint16_t ifg; -} msp430x_gpio_registers_t; - -/** - * @brief MSP430X I/O ports static initializer. - * @details An instance of this structure must be passed to @p palInit() at - * system startup time in order to initialized the digital I/O - * subsystem. This represents only the initial setup, specific pads - * or whole ports can be reprogrammed at later time. - */ -typedef struct { -#if defined(PA_BASE) || defined(__DOXYGEN__) - msp430x_gpio_setup_t porta; -#endif -#if defined(PB_BASE) || defined(__DOXYGEN__) - msp430x_gpio_setup_t portb; -#endif -#if defined(PC_BASE) || defined(__DOXYGEN__) - msp430x_gpio_setup_t portc; -#endif -#if defined(PD_BASE) || defined(__DOXYGEN__) - msp430x_gpio_setup_t portd; -#endif -#if defined(PE_BASE) || defined(__DOXYGEN__) - msp430x_gpio_setup_t porte; -#endif -#if defined(PF_BASE) || defined(__DOXYGEN__) - msp430x_gpio_setup_t portf; -#endif - msp430x_gpio_setup_t portj; -} PALConfig; - -/** - * @brief Digital I/O port sized unsigned type. - */ -typedef uint16_t ioportmask_t; - -/** - * @brief Digital I/O modes. - */ -typedef uint16_t iomode_t; - -/** - * @brief Type of an I/O line. - */ -typedef uint16_t ioline_t; - -/** - * @brief Port Identifier. - * @details This type can be a scalar or some kind of pointer, do not make - * any assumption about it, use the provided macros when populating - * variables of this type. - */ -typedef msp430x_gpio_registers_t * ioportid_t; - -/*===========================================================================*/ -/* I/O Ports Identifiers. */ -/*===========================================================================*/ - -/** - * @brief GPIO port A identifier. - */ -#if defined(PA_BASE) || defined(__DOXYGEN__) -#define IOPORT1 ((volatile msp430x_gpio_registers_t *)PA_BASE) -#endif - -/** - * @brief GPIO port B identifier. - */ -#if defined(PB_BASE) || defined(__DOXYGEN__) -#define IOPORT2 ((volatile msp430x_gpio_registers_t *)PB_BASE) -#endif - -/** - * @brief GPIO port C identifier. - */ -#if defined(PC_BASE) || defined(__DOXYGEN__) -#define IOPORT3 ((volatile msp430x_gpio_registers_t *)PC_BASE) -#endif - -/** - * @brief GPIO port D identifier. - */ -#if defined(PD_BASE) || defined(__DOXYGEN__) -#define IOPORT4 ((volatile msp430x_gpio_registers_t *)PD_BASE) -#endif - -/** - * @brief GPIO port E identifier. - */ -#if defined(PE_BASE) || defined(__DOXYGEN__) -#define IOPORT5 ((volatile msp430x_gpio_registers_t *)PE_BASE) -#endif - -/** - * @brief GPIO port F identifier. - */ -#if defined(PF_BASE) || defined(__DOXYGEN__) -#define IOPORT6 ((volatile msp430x_gpio_registers_t *)PF_BASE -#endif - -/** - * @brief GPIO port J identifier. - */ -#define IOPORT0 ((volatile msp430x_gpio_registers_t *)PJ_BASE) - -/*===========================================================================*/ -/* Implementation, some of the following macros could be implemented as */ -/* functions, if so please put them in pal_lld.c. */ -/*===========================================================================*/ - -/** - * @brief Low level PAL subsystem initialization. - * - * @param[in] config architecture-dependent ports configuration - * - * @notapi - */ -#define pal_lld_init(config) _pal_lld_init(config) - -/** - * @brief Reads the physical I/O port states. - * - * @param[in] port port identifier - * @return The port bits. - * - * @notapi - */ -#define pal_lld_readport(port) ((port)->in) - -/** - * @brief Reads the output latch. - * @details The purpose of this function is to read back the latched output - * value. - * - * @param[in] port port identifier - * @return The latched logical states. - * - * @notapi - */ -#define pal_lld_readlatch(port) ((port)->out) - -/** - * @brief Writes a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be written on the specified port - * - * @notapi - */ -#define pal_lld_writeport(port, bits) ((port)->out = (bits)) - -/** - * @brief Sets a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be ORed on the specified port - * - * @notapi - */ -#define pal_lld_setport(port, bits) ((port)->out |= (bits)) - -/** - * @brief Clears a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be cleared on the specified port - * - * @notapi - */ -#define pal_lld_clearport(port, bits) ((port)->out &= ~(bits)) - -/** - * @brief Toggles a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be XORed on the specified port - * - * @notapi - */ -#define pal_lld_toggleport(port, bits) ((port)->out ^= (bits)) - -/** - * @brief Pads group mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] mode group mode - * - * @notapi - */ -#define pal_lld_setgroupmode(port, mask, offset, mode) \ - _pal_lld_setgroupmode(port, mask << offset, mode) - -/** - * @brief Clears a pad logical state to @p PAL_LOW. - * @details This function is implemented in a way which should - * produce a BIC instruction rather than an AND - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_clearpad(port, pad) ((port)->out &= ~(1 << pad)) - -#if !defined(__DOXYGEN__) -extern const PALConfig pal_default_config; -#endif - -#ifdef __cplusplus -extern "C" { -#endif -void _pal_lld_init(const PALConfig * config); -void _pal_lld_setgroupmode(ioportid_t port, ioportmask_t mask, iomode_t mode); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PAL == TRUE */ - -#endif /* _PAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.c deleted file mode 100644 index 0d9aa1c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.c +++ /dev/null @@ -1,668 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_serial_lld.c - * @brief MSP430X serial subsystem low level driver source. - * - * @addtogroup SERIAL - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief USART0 serial driver identifier.*/ -#if (MSP430X_SERIAL_USE_USART0 == TRUE) || defined(__DOXYGEN__) -#ifndef __MSP430_HAS_EUSCI_A0__ -#error "Cannot find USCI module to use for SD0" -#endif -#ifdef MSP430X_USCI_A0_USED -#error "USCI module A0 already in use - USART0 not available" -#endif -SerialDriver SD0; -#define MSP430X_USCI_A0_USED -#endif - -/** @brief USART1 serial driver identifier.*/ -#if (MSP430X_SERIAL_USE_USART1 == TRUE) || defined(__DOXYGEN__) -#ifndef __MSP430_HAS_EUSCI_A1__ -#error "Cannot find USCI module to use for SD1" -#endif -#ifdef MSP430X_USCI_A1_USED -#error "USCI module A1 already in use - USART1 not available" -#endif -SerialDriver SD1; -#define MSP430X_USCI_A1_USED -#endif - -/** @brief USART2 serial driver identifier.*/ -#if (MSP430X_SERIAL_USE_USART2 == TRUE) || defined(__DOXYGEN__) -#ifndef __MSP430_HAS_EUSCI_A2__ -#error "Cannot find USCI module to use for SD2" -#endif -#ifdef MSP430X_USCI_A2_USED -#error "USCI module A2 already in use - USART2 not available" -#endif -SerialDriver SD2; -#define MSP430X_USCI_A2_USED -#endif - -/** @brief USART3 serial driver identifier.*/ -#if (MSP430X_SERIAL_USE_USART3 == TRUE) || defined(__DOXYGEN__) -#ifndef __MSP430_HAS_EUSCI_A3__ -#error "Cannot find USCI module to use for SD3" -#endif -#ifdef MSP430X_USCI_A3_USED -#error "USCI module A3 already in use - USART3 not available" -#endif -SerialDriver SD3; -#define MSP430X_USCI_A3_USED -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Driver default configuration. - */ -static const SerialConfig default_config = { SERIAL_DEFAULT_BITRATE }; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief UCBRS calculation. - * @details This function calculates the UCBRS value for oversampled baud - * rates. - * - * @param[in] frac Fractional part of baud rate division, times 10000. - */ -static uint8_t UCBRS(uint16_t frac) { - /* TODO there must be a better way */ - if (frac < 529) - return 0x00; - else if (frac < 715) - return 0x01; - else if (frac < 835) - return 0x02; - else if (frac < 1001) - return 0x04; - else if (frac < 1252) - return 0x08; - else if (frac < 1430) - return 0x10; - else if (frac < 1670) - return 0x20; - else if (frac < 2147) - return 0x11; - else if (frac < 2224) - return 0x21; - else if (frac < 2503) - return 0x22; - else if (frac < 3000) - return 0x44; - else if (frac < 3335) - return 0x25; - else if (frac < 3575) - return 0x49; - else if (frac < 3753) - return 0x4A; - else if (frac < 4003) - return 0x52; - else if (frac < 4286) - return 0x92; - else if (frac < 4378) - return 0x53; - else if (frac < 5002) - return 0x55; - else if (frac < 5715) - return 0xAA; - else if (frac < 6003) - return 0x6B; - else if (frac < 6254) - return 0xAD; - else if (frac < 6432) - return 0xB5; - else if (frac < 6667) - return 0xB6; - else if (frac < 7001) - return 0xD6; - else if (frac < 7147) - return 0xB7; - else if (frac < 7503) - return 0xBB; - else if (frac < 7861) - return 0xDD; - else if (frac < 8004) - return 0xED; - else if (frac < 8333) - return 0xEE; - else if (frac < 8464) - return 0xBF; - else if (frac < 8572) - return 0xDF; - else if (frac < 8751) - return 0xEF; - else if (frac < 9004) - return 0xF7; - else if (frac < 9170) - return 0xFB; - else if (frac < 9288) - return 0xFD; - else - return 0xFE; -} - -/** - * @brief Modulation control word calculator. - * @details This function calculates the modulation control word from the - * input clock frequency and the requested baud rate. - * - * @param[in] baud Requested baud rate - * @param[in] freq Frequency of the clock driving the USCI module - */ -static uint16_t UCAxMCTLW(uint32_t baud, uint32_t freq) { - - uint16_t n = freq / baud; - /*uint16_t frac = (freq * 10000 / baud) - ((freq / baud) * 10000);*/ - uint16_t frac = (freq - (n * baud)) * 10000 / baud; - if (n > 16) { - while (n > 16) { - n -= 16; - } - return (UCBRS(frac) << 8) | (n << 4) | UCOS16; - } - return UCBRS(frac) << 8; -} - -/** - * @brief UCBRW calculation. - * @details This function calculates the UCBRW value for all baud - * rates. - * - * @param[in] baud Requested baud rate - * @param[in] freq Frequency of the clock driving the USCI module - */ -static uint16_t UCAxBRW(uint32_t baud, uint32_t freq) { - uint16_t n = freq / baud; - if (n > 16) { - return n >> 4; - } - return n; -} - -#if (MSP430X_SERIAL_USE_USART0 == TRUE) || defined(__DOXYGEN__) -static void usart0_init(const SerialConfig * config) { - UCA0BRW = UCAxBRW(config->sc_bitrate, MSP430X_USART0_CLK_FREQ); - UCA0MCTLW = UCAxMCTLW(config->sc_bitrate, MSP430X_USART0_CLK_FREQ); - UCA0STATW = 0; - UCA0ABCTL = 0; - UCA0IRCTL = 0; - UCA0CTLW0 = (MSP430X_USART0_PARITY << 14) | (MSP430X_USART0_ORDER << 13) | - (MSP430X_USART0_SIZE << 12) | (MSP430X_USART0_STOP << 11) | - (MSP430X_USART0_UCSSEL); - UCA0IE = UCRXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART1 == TRUE) || defined(__DOXYGEN__) -static void usart1_init(const SerialConfig * config) { - UCA1BRW = UCAxBRW(config->sc_bitrate, MSP430X_USART1_CLK_FREQ); - UCA1MCTLW = UCAxMCTLW(config->sc_bitrate, MSP430X_USART1_CLK_FREQ); - UCA1STATW = 0; - UCA1ABCTL = 0; - UCA1IRCTL = 0; - UCA1CTLW0 = (MSP430X_USART1_PARITY << 14) | (MSP430X_USART1_ORDER << 13) | - (MSP430X_USART1_SIZE << 12) | (MSP430X_USART1_STOP << 11) | - (MSP430X_USART1_UCSSEL); - UCA1IE = UCRXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART2 == TRUE) || defined(__DOXYGEN__) -static void usart2_init(const SerialConfig * config) { - UCA2BRW = UCAxBRW(config->sc_bitrate, MSP430X_USART2_CLK_FREQ); - UCA2MCTLW = UCAxMCTLW(config->sc_bitrate); - UCA2STATW = 0; - UCA2ABCTL = 0; - UCA2IRCTL = 0; - UCA2CTLW0 = (MSP430X_USART2_PARITY << 14) | (MSP430X_USART2_ORDER << 13) | - (MSP430X_USART2_SIZE << 12) | (MSP430X_USART2_STOP << 11) | - (MSP430X_USART2_UCSSEL); - UCA2IE = UCRXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART3 == TRUE) || defined(__DOXYGEN__) -static void usart3_init(const SerialConfig * config) { - UCA3BRW = UCAxBRW(config->sc_bitrate, MSP430X_USART3_CLK_FREQ); - UCA3MCTLW = UCAxMCTLW(config->sc_bitrate, MSP430X_USART3_CLK_FREQ); - UCA3STATW = 0; - UCA3ABCTL = 0; - UCA3IRCTL = 0; - UCA3CTLW0 = (MSP430X_USART3_PARITY << 14) | (MSP430X_USART3_ORDER << 13) | - (MSP430X_USART3_SIZE << 12) | (MSP430X_USART3_STOP << 11) | - (MSP430X_USART3_UCSSEL); - UCA3IE = UCRXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART0 == TRUE) || defined(__DOXYGEN__) -static void notify0(io_queue_t * qp) { - - (void)qp; - UCA0IE |= UCTXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART1 == TRUE) || defined(__DOXYGEN__) -static void notify1(io_queue_t * qp) { - - (void)qp; - UCA1IE |= UCTXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART2 == TRUE) || defined(__DOXYGEN__) -static void notify2(io_queue_t * qp) { - - (void)qp; - UCA2IE |= UCTXIE; -} -#endif - -#if (MSP430X_SERIAL_USE_USART3 == TRUE) || defined(__DOXYGEN__) -static void notify3(io_queue_t * qp) { - - (void)qp; - UCA3IE |= UCTXIE; -} -#endif - -/** - * @brief Error handling routine. - * - * @param[in] sra USCI status register containing errors - * @param[in] sdp pointer to a @p SerialDriver object - */ -static void set_error(uint16_t sra, SerialDriver * sdp) { - eventflags_t sts = 0; - - if (sra & UCOE) - sts |= SD_OVERRUN_ERROR; - if (sra & UCPE) - sts |= SD_PARITY_ERROR; - if (sra & UCFE) - sts |= SD_FRAMING_ERROR; - osalSysLockFromISR(); - chnAddFlagsI(sdp, sts); - osalSysUnlockFromISR(); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if MSP430X_SERIAL_USE_USART0 || defined(__DOXYGEN__) -/** - * @brief USART0 interrupt handler. - * - * @isr - */ -PORT_IRQ_HANDLER(USCI_A0_VECTOR) { - msg_t b; - - OSAL_IRQ_PROLOGUE(); - - switch (__even_in_range(UCA0IV, USCI_UART_UCTXCPTIFG)) { - case USCI_UART_UCRXIFG: /* RX interrupt */ - - /* Detect errors */ - if (UCA0STATW & UCRXERR) - set_error(UCA0STATW, &SD0); - - /* Data available */ - osalSysLockFromISR(); - sdIncomingDataI(&SD0, UCA0RXBUF); - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXIFG: /* TX interrupt */ - - /* Transmission buffer empty */ - osalSysLockFromISR(); - b = sdRequestDataI(&SD0); - if (b < Q_OK) { - chnAddFlagsI(&SD0, CHN_OUTPUT_EMPTY); - UCA0IE = (UCA0IE & ~UCTXIE) | UCTXCPTIE; - UCA0IFG |= UCTXIFG; /* If we don't write to TXBUF, IFG won't get set */ - } - else - UCA0TXBUF = b; - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXCPTIFG: /* TX complete interrupt */ - - /* Physical transmission end */ - osalSysLockFromISR(); - if (oqIsEmptyI(&SD0.oqueue)) - chnAddFlagsI(&SD0, CHN_TRANSMISSION_END); - UCA0IE &= ~UCTXCPTIE; - break; - - default: /* other interrupts */ - while (1) - ; - break; - } - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if MSP430X_SERIAL_USE_USART1 || defined(__DOXYGEN__) -/** - * @brief USART1 interrupt handler. - * - * @isr - */ -PORT_IRQ_HANDLER(USCI_A1_VECTOR) { - msg_t b; - - OSAL_IRQ_PROLOGUE(); - - switch (__even_in_range(UCA1IV, USCI_UART_UCTXCPTIFG)) { - case USCI_UART_UCRXIFG: /* RX interrupt */ - - /* Detect errors */ - if (UCA1STATW & UCRXERR) - set_error(UCA1STATW, &SD1); - - /* Data available */ - osalSysLockFromISR(); - sdIncomingDataI(&SD1, UCA1RXBUF); - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXIFG: /* TX interrupt */ - - /* Transmission buffer empty */ - osalSysLockFromISR(); - b = sdRequestDataI(&SD1); - if (b < Q_OK) { - chnAddFlagsI(&SD1, CHN_OUTPUT_EMPTY); - UCA1IE = (UCA1IE & ~UCTXIE) | UCTXCPTIE; - UCA1IFG |= UCTXIFG; /* If we don't write to TXBUF, IFG won't get set */ - } - else - UCA1TXBUF = b; - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXCPTIFG: /* TX complete interrupt */ - - /* Physical transmission end */ - osalSysLockFromISR(); - if (oqIsEmptyI(&SD1.oqueue)) - chnAddFlagsI(&SD1, CHN_TRANSMISSION_END); - UCA1IE &= ~UCTXCPTIE; - break; - - default: /* other interrupts */ - while (1) - ; - break; - } - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if MSP430X_SERIAL_USE_USART2 || defined(__DOXYGEN__) -/** - * @brief USART2 interrupt handler. - * - * @isr - */ -PORT_IRQ_HANDLER(USCI_A2_VECTOR) { - msg_t b; - - OSAL_IRQ_PROLOGUE(); - - switch (__even_in_range(UCA2IV, USCI_UART_UCTXCPTIFG)) { - case USCI_UART_UCRXIFG: /* RX interrupt */ - - /* Detect errors */ - if (UCA2STATW & UCRXERR) - set_error(UCA2STATW, &SD2); - - /* Data available */ - osalSysLockFromISR(); - sdIncomingDataI(&SD2, UCA2RXBUF); - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXIFG: /* TX interrupt */ - - /* Transmission buffer empty */ - osalSysLockFromISR(); - b = sdRequestDataI(&SD2); - if (b < Q_OK) { - chnAddFlagsI(&SD2, CHN_OUTPUT_EMPTY); - UCA2IE = (UCA2IE & ~UCTXIE) | UCTXCPTIE; - UCA2IFG |= UCTXIFG; /* If we don't write to TXBUF, IFG won't get set */ - } - else - UCA2TXBUF = b; - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXCPTIFG: /* TX complete interrupt */ - - /* Physical transmission end */ - osalSysLockFromISR(); - if (oqIsEmptyI(&SD2.oqueue)) - chnAddFlagsI(&SD2, CHN_TRANSMISSION_END); - UCA2IE &= ~UCTXCPTIE; - break; - - default: /* other interrupts */ - while (1) - ; - break; - } - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if MSP430X_SERIAL_USE_USART3 || defined(__DOXYGEN__) -/** - * @brief USART3 interrupt handler. - * - * @isr - */ -PORT_IRQ_HANDLER(USCI_A3_VECTOR) { - msg_t b; - - OSAL_IRQ_PROLOGUE(); - - switch (__even_in_range(UCA3IV, USCI_UART_UCTXCPTIFG)) { - case USCI_UART_UCRXIFG: /* RX interrupt */ - - /* Detect errors */ - if (UCA3STATW & UCRXERR) - set_error(UCA3STATW, &SD3); - - /* Data available */ - osalSysLockFromISR(); - sdIncomingDataI(&SD3, UCA3RXBUF); - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXIFG: /* TX interrupt */ - - /* Transmission buffer empty */ - osalSysLockFromISR(); - b = sdRequestDataI(&SD3); - if (b < Q_OK) { - chnAddFlagsI(&SD3, CHN_OUTPUT_EMPTY); - UCA3IE = (UCA3IE & ~UCTXIE) | UCTXCPTIE; - UCA3IFG |= UCTXIFG; /* If we don't write to TXBUF, IFG won't get set */ - } - else - UCA3TXBUF = b; - osalSysUnlockFromISR(); - break; - - case USCI_UART_UCTXCPTIFG: /* TX complete interrupt */ - - /* Physical transmission end */ - osalSysLockFromISR(); - if (oqIsEmptyI(&SD3.oqueue)) - chnAddFlagsI(&SD3, CHN_TRANSMISSION_END); - UCA3IE &= ~UCTXCPTIE; - break; - - default: /* other interrupts */ - while (1) - ; - break; - } - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level serial driver initialization. - * - * @notapi - */ -void sd_lld_init(void) { - -#if MSP430X_SERIAL_USE_USART0 == TRUE - sdObjectInit(&SD0, NULL, notify0); -#endif - -#if MSP430X_SERIAL_USE_USART1 == TRUE - sdObjectInit(&SD1, NULL, notify1); -#endif - -#if MSP430X_SERIAL_USE_USART2 == TRUE - sdObjectInit(&SD2, NULL, notify2); -#endif - -#if MSP430X_SERIAL_USE_USART3 == TRUE - sdObjectInit(&SD3, NULL, notify3); -#endif -} - -/** - * @brief Low level serial driver configuration and (re)start. - * - * @param[in] sdp pointer to a @p SerialDriver object - * @param[in] config the architecture-dependent serial driver configuration. - * If this parameter is set to @p NULL then a default - * configuration is used. - * - * @notapi - */ -void sd_lld_start(SerialDriver * sdp, const SerialConfig * config) { - - if (config == NULL) { - config = &default_config; - } - - if (sdp->state == SD_STOP) { -#if MSP430X_SERIAL_USE_USART0 == TRUE - if (&SD0 == sdp) { - usart0_init(config); - } -#endif -#if MSP430X_SERIAL_USE_USART1 == TRUE - if (&SD1 == sdp) { - usart1_init(config); - } -#endif -#if MSP430X_SERIAL_USE_USART2 == TRUE - if (&SD2 == sdp) { - usart2_init(config); - } -#endif -#if MSP430X_SERIAL_USE_USART3 == TRUE - if (&SD3 == sdp) { - usart3_init(config); - } -#endif - } -} - -/** - * @brief Low level serial driver stop. - * @details De-initializes the USART, stops the associated clock, resets the - * interrupt vector. - * - * @param[in] sdp pointer to a @p SerialDriver object - * - * @notapi - */ -void sd_lld_stop(SerialDriver * sdp) { - - if (sdp->state == SD_READY) { -#if MSP430X_SERIAL_USE_USART0 == TRUE - if (&SD0 == sdp) { - UCA0CTLW0 = UCSWRST; - } -#endif -#if MSP430X_SERIAL_USE_USART1 == TRUE - if (&SD1 == sdp) { - UCA1CTLW0 = UCSWRST; - } -#endif -#if MSP430X_SERIAL_USE_USART2 == TRUE - if (&SD2 == sdp) { - UCA2CTLW0 = UCSWRST; - } -#endif -#if MSP430X_SERIAL_USE_USART3 == TRUE - if (&SD3 == sdp) { - UCA3CTLW0 = UCSWRST; - } -#endif - } -} - -#endif /* HAL_USE_SERIAL == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.h deleted file mode 100644 index 389e5c8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_serial_lld.h +++ /dev/null @@ -1,320 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_serial_lld.h - * @brief MSP430X serial subsystem low level driver header. - * - * @addtogroup SERIAL - * @{ - */ - -#ifndef _SERIAL_LLD_H_ -#define _SERIAL_LLD_H_ - -#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define NONE 0 -#define ODD 2 -#define EVEN 3 - -#define MSB 1 -#define LSB 0 - -#define SEVEN 1 -#define EIGHT 0 - -#define ONE 0 -#define TWO 1 - -#define MSP430X_SERIAL_SMCLK UCSSEL__SMCLK -#define MSP430X_SERIAL_UCLK UCSSEL__UCLK -#define MSP430X_SERIAL_ACLK UCSSEL__ACLK - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name USART0 configuration options - * @{ - */ -/** - * @brief USART0 driver enable switch. - * @details If set to @p TRUE the support for USART1 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SERIAL_USE_USART0) || defined(__DOXYGEN__) -#define MSP430X_SERIAL_USE_USART0 FALSE -#endif -/** @} */ - -/** - * @name USART1 configuration options - * @{ - */ -/** - * @brief USART1 driver enable switch. - * @details If set to @p TRUE the support for USART1 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SERIAL_USE_USART1) || defined(__DOXYGEN__) -#define MSP430X_SERIAL_USE_USART1 FALSE -#endif -/** @} */ - -/** - * @name USART2 configuration options - * @{ - */ -/** - * @brief USART2 driver enable switch. - * @details If set to @p TRUE the support for USART1 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SERIAL_USE_USART2) || defined(__DOXYGEN__) -#define MSP430X_SERIAL_USE_USART2 FALSE -#endif -/** @} */ - -/** - * @name USART3 configuration options - * @{ - */ -/** - * @brief USART3 driver enable switch. - * @details If set to @p TRUE the support for USART1 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SERIAL_USE_USART3) || defined(__DOXYGEN__) -#define MSP430X_SERIAL_USE_USART3 FALSE -#endif - -#if MSP430X_SERIAL_USE_USART0 - #if !defined(MSP430X_USART0_PARITY) - #define MSP430X_USART0_PARITY NONE - #endif - #if !defined(MSP430X_USART0_ORDER) - #define MSP430X_USART0_ORDER LSB - #endif - #if !defined(MSP430X_USART0_SIZE) - #define MSP430X_USART0_SIZE EIGHT - #endif - #if !defined(MSP430X_USART0_STOP) - #define MSP430X_USART0_STOP ONE - #endif - #if !defined(MSP430X_USART0_CLK_SRC) - #define MSP430X_USART0_CLK_SRC MSP430X_UCLK_SRC - #ifndef MSP430X_USART0_CLK_FREQ - #error "Requested external UART0 clock but no frequency given" - #endif - #define MSP430X_USART0_UCSSEL UCSSEL__UCLK - #elif MSP430X_USART0_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_USART0_CLK_SRC MSP430X_ACLK_SRC - #define MSP430X_USART0_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_USART0_UCSSEL UCSSEL__ACLK - #elif MSP430X_USART0_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC - #define MSP430X_USART0_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_USART0_UCSSEL UCSSEL__SMCLK - #else - #error "MSP430X_USART0_CLK_SRC invalid" - #endif -#endif - -#if MSP430X_SERIAL_USE_USART1 - #if !defined(MSP430X_USART1_PARITY) - #define MSP430X_USART1_PARITY NONE - #endif - #if !defined(MSP430X_USART1_ORDER) - #define MSP430X_USART1_ORDER LSB - #endif - #if !defined(MSP430X_USART1_SIZE) - #define MSP430X_USART1_SIZE EIGHT - #endif - #if !defined(MSP430X_USART1_STOP) - #define MSP430X_USART1_STOP ONE - #endif - #if !defined(MSP430X_USART1_CLK_SRC) - #define MSP430X_USART1_CLK_SRC MSP430X_UCLK_SRC - #ifndef MSP430X_USART1_CLK_FREQ - #error "Requested external UART0 clock but no frequency given" - #endif - #define MSP430X_USART1_UCSSEL UCSSEL__UCLK - #elif MSP430X_USART1_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_USART1_CLK_SRC MSP430X_ACLK_SRC - #define MSP430X_USART1_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_USART1_UCSSEL UCSSEL__ACLK - #elif MSP430X_USART1_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_USART1_CLK_SRC MSP430X_SMCLK_SRC - #define MSP430X_USART1_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_USART1_UCSSEL UCSSEL__SMCLK - #else - #error "MSP430X_USART1_CLK_SRC invalid" - #endif -#endif - -#if MSP430X_SERIAL_USE_USART2 - #if !defined(MSP430X_USART2_PARITY) - #define MSP430X_USART2_PARITY NONE - #endif - #if !defined(MSP430X_USART2_ORDER) - #define MSP430X_USART2_ORDER LSB - #endif - #if !defined(MSP430X_USART2_SIZE) - #define MSP430X_USART2_SIZE EIGHT - #endif - #if !defined(MSP430X_USART2_STOP) - #define MSP430X_USART2_STOP ONE - #endif - #if !defined(MSP430X_USART2_CLK_SRC) - #define MSP430X_USART2_CLK_SRC MSP430X_UCLK_SRC - #ifndef MSP430X_USART2_CLK_FREQ - #error "Requested external UART0 clock but no frequency given" - #endif - #define MSP430X_USART2_UCSSEL UCSSEL__UCLK - #elif MSP430X_USART2_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_USART2_CLK_SRC MSP430X_ACLK_SRC - #define MSP430X_USART2_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_USART2_UCSSEL UCSSEL__ACLK - #elif MSP430X_USART2_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_USART2_CLK_SRC MSP430X_SMCLK_SRC - #define MSP430X_USART2_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_USART2_UCSSEL UCSSEL__SMCLK - #else - #error "MSP430X_USART2_CLK_SRC invalid" - #endif -#endif - -#if MSP430X_SERIAL_USE_USART3 - #if !defined(MSP430X_USART3_PARITY) - #define MSP430X_USART3_PARITY NONE - #endif - #if !defined(MSP430X_USART3_ORDER) - #define MSP430X_USART3_ORDER LSB - #endif - #if !defined(MSP430X_USART3_SIZE) - #define MSP430X_USART3_SIZE EIGHT - #endif - #if !defined(MSP430X_USART3_STOP) - #define MSP430X_USART3_STOP ONE - #endif - #if !defined(MSP430X_USART3_CLK_SRC) - #define MSP430X_USART3_CLK_SRC MSP430X_UCLK_SRC - #ifndef MSP430X_USART3_CLK_FREQ - #error "Requested external UART0 clock but no frequency given" - #endif - #define MSP430X_USART3_UCSSEL UCSSEL__UCLK - #elif MSP430X_USART3_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_USART3_CLK_SRC MSP430X_ACLK_SRC - #define MSP430X_USART3_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_USART3_UCSSEL UCSSEL__ACLK - #elif MSP430X_USART3_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_USART3_CLK_SRC MSP430X_SMCLK_SRC - #define MSP430X_USART3_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_USART3_UCSSEL UCSSEL__SMCLK - #else - #error "MSP430X_USART3_CLK_SRC invalid" - #endif -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief MSP430X Serial Driver configuration structure. - * @details An insance of this structure must be passed to @p sdStart() - * in order to configure and start a serial driver operations. - * @note This structure content is architecture dependent, each driver - * implementation defines its own version and the custom static - * initializers. - */ -typedef struct { - /** - * @brief Bit rate. - */ - uint32_t sc_bitrate; - - /* End of the mandatory fields.*/ -} SerialConfig; - -/** - * @brief @p SerialDriver specific data. - */ -#define _serial_driver_data \ - _base_asynchronous_channel_data \ - /* Driver state.*/ \ - sdstate_t state; \ - /* Input queue.*/ \ - input_queue_t iqueue; \ - /* Output queue.*/ \ - output_queue_t oqueue; \ - /* Input circular buffer.*/ \ - uint8_t ib[SERIAL_BUFFERS_SIZE]; \ - /* Output circular buffer.*/ \ - uint8_t ob[SERIAL_BUFFERS_SIZE]; \ - /* End of the mandatory fields.*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if (MSP430X_SERIAL_USE_USART0 == TRUE) && !defined(__DOXYGEN__) -extern SerialDriver SD0; -#endif - -#if (MSP430X_SERIAL_USE_USART1 == TRUE) && !defined(__DOXYGEN__) -extern SerialDriver SD1; -#endif - -#if (MSP430X_SERIAL_USE_USART2 == TRUE) && !defined(__DOXYGEN__) -extern SerialDriver SD2; -#endif - -#if (MSP430X_SERIAL_USE_USART3 == TRUE) && !defined(__DOXYGEN__) -extern SerialDriver SD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void sd_lld_init(void); - void sd_lld_start(SerialDriver *sdp, const SerialConfig *config); - void sd_lld_stop(SerialDriver *sdp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SERIAL == TRUE */ - -#endif /* _SERIAL_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.c deleted file mode 100644 index 70a357e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.c +++ /dev/null @@ -1,578 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_spi_lld.c - * @brief MSP430X SPI subsystem low level driver source. - * - * @addtogroup SPI - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_SPI == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief SPIA0 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIA0 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDA0; -#endif - -/** - * @brief SPIA1 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIA1 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDA1; -#endif - -/** - * @brief SPIA2 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIA2 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDA2; -#endif - -/** - * @brief SPIA3 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIA3 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDA3; -#endif - -/** - * @brief SPIB0 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIB0 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDB0; -#endif - -/** - * @brief SPIB1 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIB1 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDB1; -#endif - -/** - * @brief SPIB2 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIB2 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDB2; -#endif - -/** - * @brief SPIB3 driver identifier. - */ -#if (MSP430X_SPI_USE_SPIB3 == TRUE) || defined(__DOXYGEN__) -SPIDriver SPIDB3; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -static const uint16_t dummytx = 0xFFFFU; -static uint16_t dummyrx; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void init_transfer(SPIDriver * spip) { - -#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE || defined(__DOXYGEN__) - if (spip->config->dmarx_index > MSP430X_DMA_CHANNELS) { - dmaRequest(&(spip->rx_req), TIME_INFINITE); - } - else { - dmaTransfer(&(spip->dmarx), &(spip->rx_req)); - } - if (spip->config->dmatx_index > MSP430X_DMA_CHANNELS) { - dmaRequest(&(spip->tx_req), TIME_INFINITE); - } - else { - dmaTransfer(&(spip->dmatx), &(spip->tx_req)); - } -#else - dmaRequest(&(spip->rx_req), TIME_INFINITE); - dmaRequest(&(spip->tx_req), TIME_INFINITE); -#endif - - *(spip->ifg) |= UCTXIFG; -} - -/** - * @brief Shared end-of-transfer callback. - * - * @param[in] spip pointer to the @p SPIDriver object - * @note This function is called in ISR context by the DMA code. - */ -static void spi_lld_end_of_transfer(void * spip) { - - /* So that future transfers will actually work */ - *(((SPIDriver *)spip)->ifg) &= ~(UCTXIFG); - /* NOTE to future me - this macro sets the driver state and calls the - * configured callback end_cb, if applicable. That callback doesn't seem to - * be modifiable without reconfiguring the whole driver. */ - _spi_isr_code((SPIDriver *)spip); -} -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level SPI driver initialization. - * - * @notapi - */ -void spi_lld_init(void) { - -#if MSP430X_SPI_USE_SPIA0 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDA0); - SPIDA0.regs = (msp430x_spi_reg_t *)(&UCA0CTLW0); - SPIDA0.ifg = (volatile uint16_t *)&UCA0IFG; - SPIDA0.tx_req.trigger = DMA_TRIGGER_MNEM(UCA0TXIFG); - SPIDA0.rx_req.trigger = DMA_TRIGGER_MNEM(UCA0RXIFG); - SPIDA0.tx_req.dest_addr = &(SPIDA0.regs->txbuf); - SPIDA0.rx_req.source_addr = &(SPIDA0.regs->rxbuf); - SPIDA0.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA0.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA0.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA0.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA0.tx_req.callback.callback = NULL; - SPIDA0.tx_req.callback.args = NULL; - SPIDA0.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDA0.rx_req.callback.args = &SPIDA0; -/* NOTE to my future self - this must be SINGLE because BLOCK and BURST - * don't wait for triggers and would overflow both buffers. Don't worry, it - * still works - the transfer isn't complete until SZ bytes are transferred */ -#endif - -#if MSP430X_SPI_USE_SPIA1 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDA1); - SPIDA1.regs = (msp430x_spi_reg_t *)(&UCA1CTLW0); - SPIDA1.ifg = (volatile uint16_t *)&UCA1IFG; - SPIDA1.tx_req.trigger = DMA_TRIGGER_MNEM(UCA1TXIFG); - SPIDA1.rx_req.trigger = DMA_TRIGGER_MNEM(UCA1RXIFG); - SPIDA1.tx_req.dest_addr = &(SPIDA1.regs->txbuf); - SPIDA1.rx_req.source_addr = &(SPIDA1.regs->rxbuf); - SPIDA1.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA1.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA1.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA1.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA1.tx_req.callback.callback = NULL; - SPIDA1.tx_req.callback.args = NULL; - SPIDA1.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDA1.rx_req.callback.args = &SPIDA1; -#endif - -#if MSP430X_SPI_USE_SPIA2 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDA2); - SPIDA2.regs = (msp430x_spi_reg_t *)(&UCA2CTLW0); - SPIDA2.ifg = (volatile uint16_t *)&UCA2IFG; - SPIDA2.tx_req.trigger = DMA_TRIGGER_MNEM(UCA2TXIFG); - SPIDA2.rx_req.trigger = DMA_TRIGGER_MNEM(UCA2RXIFG); - SPIDA2.tx_req.dest_addr = &(SPIDA2.regs->txbuf); - SPIDA2.rx_req.source_addr = &(SPIDA2.regs->rxbuf); - SPIDA2.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA2.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA2.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA2.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA2.tx_req.callback.callback = NULL; - SPIDA2.tx_req.callback.args = NULL; - SPIDA2.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDA2.rx_req.callback.args = &SPIDA2; -#endif - -#if MSP430X_SPI_USE_SPIA3 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDA3); - SPIDA3.regs = (msp430x_spi_reg_t *)(&UCA3CTLW0); - SPIDA3.ifg = (volatile uint16_t *)&UCA3IFG; - SPIDA3.tx_req.trigger = DMA_TRIGGER_MNEM(UCA3TXIFG); - SPIDA3.rx_req.trigger = DMA_TRIGGER_MNEM(UCA3RXIFG); - SPIDA3.tx_req.dest_addr = &(SPIDA3.regs->txbuf); - SPIDA3.rx_req.source_addr = &(SPIDA3.regs->rxbuf); - SPIDA3.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA3.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDA3.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA3.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDA3.tx_req.callback.callback = NULL; - SPIDA3.tx_req.callback.args = NULL; - SPIDA3.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDA3.rx_req.callback.args = &SPIDA3; -#endif - -#if MSP430X_SPI_USE_SPIB0 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDB0); - SPIDB0.regs = (msp430x_spi_reg_t *)(&UCB0CTLW0); - SPIDB0.ifg = (volatile uint16_t *)&UCB0IFG; - SPIDB0.tx_req.trigger = DMA_TRIGGER_MNEM(UCB0TXIFG0); - SPIDB0.rx_req.trigger = DMA_TRIGGER_MNEM(UCB0RXIFG0); - SPIDB0.tx_req.dest_addr = &(SPIDB0.regs->txbuf); - SPIDB0.rx_req.source_addr = &(SPIDB0.regs->rxbuf); - SPIDB0.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB0.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB0.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB0.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB0.tx_req.callback.callback = NULL; - SPIDB0.tx_req.callback.args = NULL; - SPIDB0.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDB0.rx_req.callback.args = &SPIDB0; -#endif - -#if MSP430X_SPI_USE_SPIB1 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDB1); - SPIDB1.regs = (msp430x_spi_reg_t *)(&UCB1CTLW0); - SPIDB1.ifg = (volatile uint16_t *)&UCB1IFG; - SPIDB1.tx_req.trigger = DMA_TRIGGER_MNEM(UCB1TXIFG0); - SPIDB1.rx_req.trigger = DMA_TRIGGER_MNEM(UCB1RXIFG0); - SPIDB1.tx_req.dest_addr = &(SPIDB1.regs->txbuf); - SPIDB1.rx_req.source_addr = &(SPIDB1.regs->rxbuf); - SPIDB1.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB1.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB1.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB1.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB1.tx_req.callback.callback = NULL; - SPIDB1.tx_req.callback.args = NULL; - SPIDB1.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDB1.rx_req.callback.args = &SPIDB1; -#endif - -#if MSP430X_SPI_USE_SPIB2 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDB2); - SPIDB2.regs = (msp430x_spi_reg_t *)(&UCB2CTLW0); - SPIDB2.ifg = (volatile uint16_t *)&UCB2IFG; - SPIDB2.tx_req.trigger = DMA_TRIGGER_MNEM(UCB2TXIFG0); - SPIDB2.rx_req.trigger = DMA_TRIGGER_MNEM(UCB2RXIFG0); - SPIDB2.tx_req.dest_addr = &(SPIDB2.regs->txbuf); - SPIDB2.rx_req.source_addr = &(SPIDB2.regs->rxbuf); - SPIDB2.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB2.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB2.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB2.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB2.tx_req.callback.callback = NULL; - SPIDB2.tx_req.callback.args = NULL; - SPIDB2.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDB2.rx_req.callback.args = &SPIDB2; -#endif - -#if MSP430X_SPI_USE_SPIB3 == TRUE - /* Driver initialization.*/ - spiObjectInit(&SPIDB3); - SPIDB3.regs = (msp430x_spi_reg_t *)(&UCB3CTLW0); - SPIDB3.ifg = (volatile uint16_t *)&UCB3IFG; - SPIDB3.tx_req.trigger = DMA_TRIGGER_MNEM(UCB3TXIFG0); - SPIDB3.rx_req.trigger = DMA_TRIGGER_MNEM(UCB3RXIFG0); - SPIDB3.tx_req.dest_addr = &(SPIDB3.regs->txbuf); - SPIDB3.rx_req.source_addr = &(SPIDB3.regs->rxbuf); - SPIDB3.tx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB3.rx_req.data_mode = MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE; - SPIDB3.tx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB3.rx_req.transfer_mode = MSP430X_DMA_SINGLE; - SPIDB3.tx_req.callback.callback = NULL; - SPIDB3.tx_req.callback.args = NULL; - SPIDB3.rx_req.callback.callback = spi_lld_end_of_transfer; - SPIDB3.rx_req.callback.args = &SPIDB3; -#endif -} - -/** - * @brief Configures and activates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_start(SPIDriver * spip) { - - if (spip->state == SPI_STOP) { -/* Enables the peripheral.*/ -#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE - /* Claim DMA streams here */ - bool b; - if (spip->config->dmatx_index < MSP430X_DMA_CHANNELS) { - b = dmaAcquire(&(spip->dmatx), spip->config->dmatx_index); - osalDbgAssert(!b, "stream already allocated"); - } - if (spip->config->dmarx_index < MSP430X_DMA_CHANNELS) { - b = dmaAcquire(&(spip->dmarx), spip->config->dmarx_index); - osalDbgAssert(!b, "stream already allocated"); - } -#endif /* MSP430X_SPI_EXCLUSIVE_DMA */ - } - uint16_t brw = 0; - uint8_t ssel = 0; -#if MSP430X_SPI_USE_SPIA0 - if (spip == &SPIDA0) { - brw = MSP430X_SPIA0_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIA0_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIA1 - if (spip == &SPIDA1) { - brw = MSP430X_SPIA1_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIA1_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIA2 - if (spip == &SPIDA2) { - brw = MSP430X_SPIA2_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIA2_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIA3 - if (spip == &SPIDA3) { - brw = MSP430X_SPIA3_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIA3_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIB0 - if (spip == &SPIDB0) { - brw = MSP430X_SPIB0_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIB0_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIB1 - if (spip == &SPIDB1) { - brw = MSP430X_SPIB1_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIB1_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIB2 - if (spip == &SPIDB2) { - brw = MSP430X_SPIB2_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIB2_UCSSEL; - } -#endif -#if MSP430X_SPI_USE_SPIB3 - if (spip == &SPIDB3) { - brw = MSP430X_SPIB3_CLK_FREQ / spip->config->bit_rate; - ssel = MSP430X_SPIB3_UCSSEL; - } -#endif - /* Configures the peripheral.*/ - spip->regs->ctlw0 = UCSWRST; - spip->regs->brw = brw; - spip->regs->ctlw0 = - (spip->config->spi_mode << 14) | (spip->config->bit_order << 13) | - (spip->config->data_size << 12) | (UCMST) | - ((spip->config->ss_line ? 0 : 2) << 9) | (UCSYNC) | (ssel) | (UCSTEM); - *(spip->ifg) = 0; -} - -/** - * @brief Deactivates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_stop(SPIDriver * spip) { - - if (spip->state == SPI_READY) { -/* Disables the peripheral.*/ -#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE - dmaRelease(&(spip->dmatx)); - dmaRelease(&(spip->dmarx)); -#endif - spip->regs->ctlw0 = UCSWRST; - } -} - -/** - * @brief Asserts the slave select signal and prepares for transfers. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_select(SPIDriver * spip) { - - if (spip->config->ss_line) { - palClearLine(spip->config->ss_line); - } -} - -/** - * @brief Deasserts the slave select signal. - * @details The previously selected peripheral is unselected. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_unselect(SPIDriver * spip) { - - if (spip->config->ss_line) { - palSetLine(spip->config->ss_line); - } -} - -/** - * @brief Ignores data on the SPI bus. - * @details This asynchronous function starts the transmission of a series of - * idle bytes on the SPI bus and ignores the received data. - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of bytes to be ignored - * - * @notapi - */ -void spi_lld_ignore(SPIDriver * spip, size_t n) { - - spip->tx_req.source_addr = &dummytx; - spip->tx_req.size = n; - spip->tx_req.addr_mode = 0; - - spip->rx_req.dest_addr = &dummyrx; - spip->rx_req.size = n; - spip->rx_req.addr_mode = 0; - - init_transfer(spip); -} - -/** - * @brief Exchanges data on the SPI bus. - * @details This asynchronous function starts a simultaneous transmit/receive - * operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be exchanged - * @param[in] txbuf the pointer to the transmit buffer - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_exchange(SPIDriver * spip, - size_t n, - const void * txbuf, - void * rxbuf) { - - spip->tx_req.source_addr = txbuf; - spip->tx_req.size = n; - spip->tx_req.addr_mode = MSP430X_DMA_SRCINCR; - - spip->rx_req.dest_addr = rxbuf; - spip->rx_req.size = n; - spip->rx_req.addr_mode = MSP430X_DMA_DSTINCR; - - init_transfer(spip); -} - -/** - * @brief Sends data over the SPI bus. - * @details This asynchronous function starts a transmit operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to send - * @param[in] txbuf the pointer to the transmit buffer - * - * @notapi - */ -void spi_lld_send(SPIDriver * spip, size_t n, const void * txbuf) { - - spip->tx_req.source_addr = txbuf; - spip->tx_req.size = n; - spip->tx_req.addr_mode = MSP430X_DMA_SRCINCR; - - spip->rx_req.dest_addr = &dummyrx; - spip->rx_req.size = n; - spip->rx_req.addr_mode = 0; - - init_transfer(spip); -} - -/** - * @brief Receives data from the SPI bus. - * @details This asynchronous function starts a receive operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to receive - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_receive(SPIDriver * spip, size_t n, void * rxbuf) { - - spip->tx_req.source_addr = &dummytx; - spip->tx_req.size = n; - spip->tx_req.addr_mode = 0; - - spip->rx_req.dest_addr = rxbuf; - spip->rx_req.size = n; - spip->rx_req.addr_mode = MSP430X_DMA_DSTINCR; - - init_transfer(spip); -} - -/** - * @brief Exchanges one frame using a polled wait. - * @details This synchronous function exchanges one frame using a polled - * synchronization method. This function is useful when exchanging - * small amount of data on high speed channels, usually in this - * situation is much more efficient just wait for completion using - * polling than suspending the thread waiting for an interrupt. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] frame the data frame to send over the SPI bus - * @return The received data frame from the SPI bus. - */ -uint16_t spi_lld_polled_exchange(SPIDriver * spip, uint16_t frame) { - - osalDbgAssert(!(frame & 0xFF00U), "16-bit transfers not supported"); - - while (!(*(spip->ifg) & UCTXIFG)) - ; - spip->regs->txbuf = frame; - while (!(*(spip->ifg) & UCRXIFG)) - ; - return spip->regs->rxbuf; -} - -#endif /* HAL_USE_SPI == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.h deleted file mode 100644 index ebf14c8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_spi_lld.h +++ /dev/null @@ -1,642 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_spi_lld.h - * @brief MSP430X SPI subsystem low level driver header. - * - * @addtogroup SPI - * @{ - */ - -#ifndef HAL_SPI_LLD_H -#define HAL_SPI_LLD_H - -#if (HAL_USE_SPI == TRUE) || defined(__DOXYGEN__) - -#include "hal_dma_lld.h" -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name MSP430X configuration options - * @{ - */ -/** - * @brief SPIA0 driver enable switch. - * @details If set to @p TRUE the support for SPIA0 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIA0) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIA0 FALSE -#endif - -/** - * @brief SPIA1 driver enable switch. - * @details If set to @p TRUE the support for SPIA1 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIA1) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIA1 FALSE -#endif - -/** - * @brief SPIA2 driver enable switch. - * @details If set to @p TRUE the support for SPIA2 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIA2) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIA2 FALSE -#endif - -/** - * @brief SPIA3 driver enable switch. - * @details If set to @p TRUE the support for SPIA3 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIA3) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIA3 FALSE -#endif - -/** - * @brief SPIB0 driver enable switch. - * @details If set to @p TRUE the support for SPIB0 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIB0) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIB0 FALSE -#endif - -/** - * @brief SPIB1 driver enable switch. - * @details If set to @p TRUE the support for SPIB1 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIB1) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIB1 FALSE -#endif - -/** - * @brief SPIB2 driver enable switch. - * @details If set to @p TRUE the support for SPIB2 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIB2) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIB2 FALSE -#endif - -/** - * @brief SPIB3 driver enable switch. - * @details If set to @p TRUE the support for SPIB3 is included. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_USE_SPIB3) || defined(__DOXYGEN__) -#define MSP430X_SPI_USE_SPIB3 FALSE -#endif - -/** - * @brief Exclusive DMA enable switch. - * @details If set to @p TRUE the support for exclusive DMA is included. - * @note This increases the size of the compiled executable somewhat. - * @note The default is @p FALSE. - */ -#if !defined(MSP430X_SPI_EXCLUSIVE_DMA) | defined(__DOXYGEN__) -#define MSP430X_SPI_EXCLUSIVE_DMA FALSE -#endif - -/** - * @brief SPIA0 clock source switch. - * @details Sets the clock source for SPIA0. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIA0_CLK_SRC) - #define MSP430X_SPIA0_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIA1 clock source switch. - * @details Sets the clock source for SPIA1. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIA1_CLK_SRC) - #define MSP430X_SPIA1_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIA2 clock source switch. - * @details Sets the clock source for SPIA2. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIA2_CLK_SRC) - #define MSP430X_SPIA2_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIA3 clock source switch. - * @details Sets the clock source for SPIA3. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIA3_CLK_SRC) - #define MSP430X_SPIA3_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIB0 clock source switch. - * @details Sets the clock source for SPIB0. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIB0_CLK_SRC) - #define MSP430X_SPIB0_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIB1 clock source switch. - * @details Sets the clock source for SPIB1. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIB1_CLK_SRC) - #define MSP430X_SPIB1_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIB2 clock source switch. - * @details Sets the clock source for SPIB2. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIB2_CLK_SRC) - #define MSP430X_SPIB2_CLK_SRC MSP430X_SMCLK_SRC -#endif - -/** - * @brief SPIB3 clock source switch. - * @details Sets the clock source for SPIB3. - * @note Legal values are @p MSP430X_SMCLK_SRC or @p MSP430X_ACLK_SRC. - * @note The default is @p MSP430X_SMCLK_SRC. - */ -#if !defined(MSP430X_SPIB3_CLK_SRC) - #define MSP430X_SPIB3_CLK_SRC MSP430X_SMCLK_SRC -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if MSP430X_SPI_USE_SPIA0 && !defined(__MSP430_HAS_EUSCI_A0__) - #error "Cannot find MSP430X_USCI module to use for SPIA0" -#endif - -#if MSP430X_SPI_USE_SPIA1 && !defined(__MSP430_HAS_EUSCI_A1__) - #error "Cannot find MSP430X_USCI module to use for SPIA1" -#endif - -#if MSP430X_SPI_USE_SPIA2 && !defined(__MSP430_HAS_EUSCI_A2__) - #error "Cannot find MSP430X_USCI module to use for SPIA2" -#endif - -#if MSP430X_SPI_USE_SPIA3 && !defined(__MSP430_HAS_EUSCI_A3__) - #error "Cannot find MSP430X_USCI module to use for SPIA3" -#endif - -#if MSP430X_SPI_USE_SPIB0 && !defined(__MSP430_HAS_EUSCI_B0__) - #error "Cannot find MSP430X_USCI module to use for SPIB0" -#endif - -#if MSP430X_SPI_USE_SPIB1 && !defined(__MSP430_HAS_EUSCI_B1__) - #error "Cannot find MSP430X_USCI module to use for SPIB1" -#endif - -#if MSP430X_SPI_USE_SPIB2 && !defined(__MSP430_HAS_EUSCI_B2__) - #error "Cannot find MSP430X_USCI module to use for SPIB2" -#endif - -#if MSP430X_SPI_USE_SPIB3 && !defined(__MSP430_HAS_EUSCI_B3__) - #error "Cannot find MSP430X_USCI module to use for SPIB3" -#endif - -#if MSP430X_SPI_USE_SPIA0 - #ifdef MSP430X_USCI_A0_USED - #error "USCI module A0 already in use - SPIA0 not available" - #else - #define MSP430X_USCI_A0_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIA1 - #ifdef MSP430X_USCI_A1_USED - #error "USCI module A1 already in use - SPIA1 not available" - #else - #define MSP430X_USCI_A1_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIA2 - #ifdef MSP430X_USCI_A2_USED - #error "USCI module A2 already in use - SPIA2 not available" - #else - #define MSP430X_USCI_A2_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIA3 - #ifdef MSP430X_USCI_A3_USED - #error "USCI module A3 already in use - SPIA3 not available" - #else - #define MSP430X_USCI_A3_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIB0 - #ifdef MSP430X_USCI_B0_USED - #error "USCI module B0 already in use - SPIB0 not available" - #else - #define MSP430X_USCI_B0_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIB1 - #ifdef MSP430X_USCI_B1_USED - #error "USCI module B1 already in use - SPIB1 not available" - #else - #define MSP430X_USCI_B1_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIB2 - #ifdef MSP430X_USCI_B2_USED - #error "USCI module B2 already in use - SPIB2 not available" - #else - #define MSP430X_USCI_B2_USED - #endif -#endif - -#if MSP430X_SPI_USE_SPIB3 - #ifdef MSP430X_USCI_B3_USED - #error "USCI module B3 already in use - SPIB3 not available" - #else - #define MSP430X_USCI_B3_USED - #endif -#endif - -#if defined(MSP430X_SPIA0_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA0 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIA0_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA0 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIA1_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA1 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIA1_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA1 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIA2_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA2 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIA2_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA2 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIA3_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA3 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIA3_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIA3 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIB0_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB0 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIB0_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB0 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIB1_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB1 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIB1_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB1 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIB2_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB2 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIB2_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB2 RX, but requested index is invalid" -#endif - -#if defined(MSP430X_SPIB3_TX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB3 TX, but requested index is invalid" -#endif -#if defined(MSP430X_SPIB3_RX_DMA) && (MSP430X_SPI_DMA >= MSP430X_DMA_CHANNELS) - #error "Requested DMA for SPIB3 RX, but requested index is invalid" -#endif - -/* TODO figure out a way to check for conflicting DMA channels */ - -#if MSP430X_SPIA0_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIA0_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIA0_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIA0_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIA0_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIA0_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIA1_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIA1_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIA1_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIA1_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIA1_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIA1_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIA2_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIA2_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIA2_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIA2_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIA2_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIA2_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIA3_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIA3_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIA3_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIA3_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIA3_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIA3_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIB0_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIB0_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIB0_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIB0_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIB0_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIB0_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIB1_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIB1_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIB1_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIB1_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIB1_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIB1_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIB2_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIB2_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIB2_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIB2_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIB2_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIB2_UCSSEL UCSSEL__SMCLK -#endif - -#if MSP430X_SPIB3_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_SPIB3_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_SPIB3_UCSSEL UCSSEL__ACLK -#elif MSP430X_SPIB3_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_SPIB3_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_SPIB3_UCSSEL UCSSEL__SMCLK -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an SPI driver. - */ -typedef struct SPIDriver SPIDriver; - -/** - * @brief SPI notification callback type. - * - * @param[in] spip pointer to the @p SPIDriver object triggering the - * callback - */ -typedef void (*spicallback_t)(SPIDriver *spip); - -/** - * @brief Enumerated type for SPI bit order. - */ -typedef enum { - MSP430X_SPI_BO_LSB = 0, - MSP430X_SPI_BO_MSB = 1 -} msp430x_spi_bit_order_t; - -/** - * @brief Enumerated type for SPI data size. - */ -typedef enum { - MSP430X_SPI_DS_EIGHT = 0, - MSP430X_SPI_DS_SEVEN = 1 -} msp430x_spi_data_size_t; - -/** - * @brief Driver configuration structure. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ -typedef struct { - /** - * @brief Operation complete callback or @p NULL. - */ - spicallback_t end_cb; - /* End of the mandatory fields.*/ - /** - * @brief The chip select line. - * @note This may be PAL_NOLINE to indicate that hardware chip select is used. - */ - ioline_t ss_line; - /** - * @brief The bit rate of the SPI interface. - * @note Nearest available rate is used. - */ - uint32_t bit_rate; - /** - * @brief The bit order of the peripheral - LSB or MSB first. - */ - msp430x_spi_bit_order_t bit_order; - /** - * @brief The data size of the peripheral - 7 or 8 bits. - */ - msp430x_spi_data_size_t data_size; - /** - * @brief The SPI mode to use - 0 through 3. - */ - uint8_t spi_mode; -#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE || defined(__DOXYGEN__) - /** - * @brief The index of the TX DMA channel. - * @note This may be >MSP430X_DMA_CHANNELS to indicate that exclusive DMA is not used. - */ - uint8_t dmatx_index; - /** - * @brief The index of the RX DMA channel. - * @note This may be >MSP430X_DMA_CHANNELS to indicate that exclusive DMA is not used. - */ - uint8_t dmarx_index; -#endif -} SPIConfig; - -/** - * @brief MSP430X SPI register structure. - */ -typedef struct { - uint16_t ctlw0; - uint16_t _padding0; - uint16_t _padding1; - uint16_t brw; - uint16_t statw_b; - uint16_t statw_a; - uint16_t rxbuf; - uint16_t txbuf; -} msp430x_spi_reg_t; - -/** - * @brief Structure representing an SPI driver. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ -struct SPIDriver { - /** - * @brief Driver state. - */ - spistate_t state; - /** - * @brief Current configuration data. - */ - const SPIConfig *config; -#if (SPI_USE_WAIT == TRUE) || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif /* SPI_USE_WAIT */ -#if (SPI_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif -#if defined(SPI_DRIVER_EXT_FIELDS) - SPI_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Configuration registers. - */ - msp430x_spi_reg_t * regs; - /** - * @brief Interrupt flag register. - */ - volatile uint16_t * ifg; - /** - * @brief TX DMA request. - */ - msp430x_dma_req_t tx_req; - /** - * @brief RX DMA request. - */ - msp430x_dma_req_t rx_req; -#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE || defined(__DOXYGEN__) - /** - * @brief TX DMA stream. - */ - msp430x_dma_ch_t dmatx; - /** - * @brief RX DMA stream. - */ - msp430x_dma_ch_t dmarx; -#endif -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if (MSP430X_SPI_USE_SPIA0 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDA0; -#endif - -#if (MSP430X_SPI_USE_SPIA1 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDA1; -#endif - -#if (MSP430X_SPI_USE_SPIA2 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDA2; -#endif - -#if (MSP430X_SPI_USE_SPIA3 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDA3; -#endif - -#if (MSP430X_SPI_USE_SPIB0 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDB0; -#endif - -#if (MSP430X_SPI_USE_SPIB1 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDB1; -#endif - -#if (MSP430X_SPI_USE_SPIB2 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDB2; -#endif - -#if (MSP430X_SPI_USE_SPIB3 == TRUE) && !defined(__DOXYGEN__) -extern SPIDriver SPIDB3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void spi_lld_init(void); - void spi_lld_start(SPIDriver *spip); - void spi_lld_stop(SPIDriver *spip); - void spi_lld_select(SPIDriver *spip); - void spi_lld_unselect(SPIDriver *spip); - void spi_lld_ignore(SPIDriver *spip, size_t n); - void spi_lld_exchange(SPIDriver *spip, size_t n, - const void *txbuf, void *rxbuf); - void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf); - void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf); - uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SPI == TRUE */ - -#endif /* HAL_SPI_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.c deleted file mode 100644 index 8ea1b9d..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_st_lld.c - * @brief MSP430X ST subsystem low level driver source. - * - * @addtogroup ST - * @{ - */ - -#include "hal.h" -#include - -#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__) - #define MSP430X_ST_DIV_CALC(x) ((MSP430X_ST_CLK_FREQ / OSAL_ST_FREQUENCY) == x) -#endif - - -#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__) - #if ((MSP430X_ST_CLK_FREQ / OSAL_ST_FREQUENCY / 64) > MSP_TIMER_COUNTER_MAX) - #error "Frequency too low for timer - please set OSAL_ST_FREQUENCY to a higher value" - #endif - - #define MSP430X_ST_DIV_CALC(x) ((MSP430X_ST_CLK_FREQ / OSAL_ST_FREQUENCY / x) <= MSP_TIMER_COUNTER_MAX) -#endif - -/* Find suitable prescaler setting */ -#if MSP430X_ST_DIV_CALC(1) - #define MSP430X_ST_DIV 1 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_0 -#elif MSP430X_ST_DIV_CALC(2) - #define MSP430X_ST_DIV 2 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_1 -#elif MSP430X_ST_DIV_CALC(3) - #define MSP430X_ST_DIV 3 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_2 -#elif MSP430X_ST_DIV_CALC(4) - #define MSP430X_ST_DIV 4 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_3 -#elif MSP430X_ST_DIV_CALC(5) - #define MSP430X_ST_DIV 5 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_4 -#elif MSP430X_ST_DIV_CALC(6) - #define MSP430X_ST_DIV 6 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_5 -#elif MSP430X_ST_DIV_CALC(7) - #define MSP430X_ST_DIV 7 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_6 -#elif MSP430X_ST_DIV_CALC(8) - #define MSP430X_ST_DIV 8 - #define MSP430X_ST_DIV_BITS ID__1 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_7 -#elif MSP430X_ST_DIV_CALC(10) - #define MSP430X_ST_DIV 10 - #define MSP430X_ST_DIV_BITS ID__2 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_4 -#elif MSP430X_ST_DIV_CALC(12) - #define MSP430X_ST_DIV 12 - #define MSP430X_ST_DIV_BITS ID__2 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_5 -#elif MSP430X_ST_DIV_CALC(14) - #define MSP430X_ST_DIV 14 - #define MSP430X_ST_DIV_BITS ID__2 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_6 -#elif MSP430X_ST_DIV_CALC(16) - #define MSP430X_ST_DIV 16 - #define MSP430X_ST_DIV_BITS ID__2 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_7 -#elif MSP430X_ST_DIV_CALC(20) - #define MSP430X_ST_DIV 20 - #define MSP430X_ST_DIV_BITS ID__4 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_4 -#elif MSP430X_ST_DIV_CALC(24) - #define MSP430X_ST_DIV 24 - #define MSP430X_ST_DIV_BITS ID__4 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_5 -#elif MSP430X_ST_DIV_CALC(28) - #define MSP430X_ST_DIV 28 - #define MSP430X_ST_DIV_BITS ID__4 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_6 -#elif MSP430X_ST_DIV_CALC(32) - #define MSP430X_ST_DIV 32 - #define MSP430X_ST_DIV_BITS ID__4 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_7 -#elif MSP430X_ST_DIV_CALC(40) - #define MSP430X_ST_DIV 40 - #define MSP430X_ST_DIV_BITS ID__8 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_4 -#elif MSP430X_ST_DIV_CALC(48) - #define MSP430X_ST_DIV 48 - #define MSP430X_ST_DIV_BITS ID__8 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_5 -#elif MSP430X_ST_DIV_CALC(56) - #define MSP430X_ST_DIV 56 - #define MSP430X_ST_DIV_BITS ID__8 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_6 -#elif MSP430X_ST_DIV_CALC(64) - #define MSP430X_ST_DIV 64 - #define MSP430X_ST_DIV_BITS ID__8 - #define MSP430X_ST_DIV_EX_BITS TAIDEX_7 -#else - #error "Error in calculating dividers - check OSAL_ST_FREQUENCY and frequency of input clock" -#endif -/* ugh never again*/ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__) - #define MSP_TIMER_COUNTER (MSP430X_ST_CLK_FREQ / OSAL_ST_FREQUENCY / MSP430X_ST_DIV) - #define MSP430X_ST_CLK_FREQ_ (MSP_TIMER_COUNTER * MSP430X_ST_DIV * OSAL_ST_FREQUENCY) - #if (MSP430X_ST_CLK_FREQ != MSP430X_ST_CLK_FREQ_) - #warning "OSAL_ST_FREQUENCY cannot be generated exactly using timer" - #endif - #undef MSP430X_ST_CLK_FREQ_ -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/** - * @brief Timer handler for both modes - */ - -PORT_IRQ_HANDLER( MSP430X_ST_ISR ) { - - OSAL_IRQ_PROLOGUE(); - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - - OSAL_IRQ_EPILOGUE(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level ST driver initialization. - * - * @notapi - */ -void st_lld_init(void) { - #if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined (__DOXYGEN__) - /* Start disabled */ - MSP430X_ST_CCR(MSP430X_ST_TIMER) = 0; - MSP430X_ST_CCTL(MSP430X_ST_TIMER) = 0; - MSP430X_ST_EX(MSP430X_ST_TIMER) = MSP430X_ST_DIV_EX_BITS; - MSP430X_ST_CTL(MSP430X_ST_TIMER) = (TACLR | MC_2 | MSP430X_ST_DIV_BITS | MSP430X_ST_TASSEL); - #endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */ - - #if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined (__DOXYGEN__) - /* Start enabled */ - MSP430X_ST_CCR(MSP430X_ST_TIMER) = MSP_TIMER_COUNTER - 1; - MSP430X_ST_CCTL(MSP430X_ST_TIMER) = CCIE; - MSP430X_ST_EX(MSP430X_ST_TIMER) = MSP430X_ST_DIV_EX_BITS; - MSP430X_ST_CTL(MSP430X_ST_TIMER) = (TACLR | MC_1 | MSP430X_ST_DIV_BITS | MSP430X_ST_TASSEL); - #endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ -} - -#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.h deleted file mode 100644 index 32ad970..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/hal_st_lld.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MSP430X/hal_st_lld.h - * @brief MSP430X ST subsystem low level driver header. - * @details This header is designed to be include-able without having to - * include other files from the HAL. - * - * @addtogroup MSP430X - * @{ - */ - -#ifndef _ST_LLD_H_ -#define _ST_LLD_H_ - -#include - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Timer maximum value - */ -#define MSP_TIMER_COUNTER_MAX 65535 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief System timer clock source. - * - * @note Legal values are undefined, MSP430X_ACLK_SRC, and - * MSP430X_SMCLK_SRC. - * @note If undefined, must define MSP430X_ST_CLK_FREQ as frequency of - * external clock and configure PAL appropriately. - */ -#if !defined (MSP430X_ST_CLK_SRC) - #ifndef MSP430X_ST_CLK_FREQ - #warning "Requested external source for ST but no frequency given" - #warning "- assuming OSAL_ST_FREQUENCY" - #define MSP430X_ST_CLK_FREQ OSAL_ST_FREQUENCY - #endif - #define MSP430X_ST_TASSEL TASSEL__TACLK -#elif MSP430X_ST_CLK_SRC == MSP430X_ACLK_SRC - #define MSP430X_ST_CLK_FREQ MSP430X_ACLK_FREQ - #define MSP430X_ST_TASSEL TASSEL__ACLK -#elif MSP430X_ST_CLK_SRC == MSP430X_SMCLK_SRC - #define MSP430X_ST_CLK_FREQ MSP430X_SMCLK_FREQ - #define MSP430X_ST_TASSEL TASSEL__SMCLK -#endif - -/* Timers */ -/** - * @brief Timer type (by letter) to be used for ST. - * @note Legal values are A and B. D support not yet implemented. - * @note Defaults to A - */ -#if !defined(MSP430X_ST_TIMER_TYPE) - #define MSP430X_ST_TIMER_TYPE A -#endif -/** - * @brief Timer instance (by number) to be used for ST. - * @note Defaults to 0 - */ -#if !defined (MSP430X_ST_TIMER_INDEX) - #define MSP430X_ST_TIMER_INDEX 0 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#define TIMER_HELPER2(x, y) x ## y -#define TIMER_HELPER(x, y) TIMER_HELPER2(x, y) -#define MSP430X_ST_TIMER TIMER_HELPER(MSP430X_ST_TIMER_TYPE, MSP430X_ST_TIMER_INDEX) -#define CCR_HELPER(x) T ## x ## CCR0 -#define MSP430X_ST_CCR(x) CCR_HELPER(x) -#define CCTL_HELPER(x) T ## x ## CCTL0 -#define MSP430X_ST_CCTL(x) CCTL_HELPER(x) -#define EX_HELPER(x) T ## x ## EX0 -#define MSP430X_ST_EX(x) EX_HELPER(x) -#define CTL_HELPER(x) T ## x ## CTL -#define MSP430X_ST_CTL(x) CTL_HELPER(x) -#define R_HELPER(x) T ## x ## R -#define MSP430X_ST_R(x) R_HELPER(x) -#define ISR_HELPER2(x, y) TIMER ## y ## _ ## x ## 0_VECTOR -#define ISR_HELPER(x, y) ISR_HELPER2(x, y) -#define MSP430X_ST_ISR ISR_HELPER(MSP430X_ST_TIMER_TYPE, MSP430X_ST_TIMER_INDEX) - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void st_lld_init(void); -#ifdef __cplusplus -} -#endif - -/*===========================================================================*/ -/* Driver inline functions. */ -/*===========================================================================*/ - -/** - * @brief Returns the time counter value. - * - * @return The counter value. - * - * @notapi - */ -static inline systime_t st_lld_get_counter(void) { - - return (systime_t)MSP430X_ST_R(MSP430X_ST_TIMER); -} - -/** - * @brief Starts the alarm. - * @note Makes sure that no spurious alarms are triggered after - * this call. - * - * @param[in] abstime the time to be set for the first alarm - * - * @notapi - */ -static inline void st_lld_start_alarm(systime_t abstime) { - - MSP430X_ST_CCR(MSP430X_ST_TIMER) = abstime; - - /* Reset pending interrupt */ - MSP430X_ST_CCTL(MSP430X_ST_TIMER) &= (~CCIFG); - - /* Enable interrupt */ - MSP430X_ST_CCTL(MSP430X_ST_TIMER) |= CCIE; -} - -/** - * @brief Stops the alarm interrupt. - * - * @notapi - */ -static inline void st_lld_stop_alarm(void) { - - MSP430X_ST_CCTL(MSP430X_ST_TIMER) &= (~CCIE); -} - -/** - * @brief Sets the alarm time. - * - * @param[in] abstime the time to be set for the next alarm - * - * @notapi - */ -static inline void st_lld_set_alarm(systime_t abstime) { - - MSP430X_ST_CCR(MSP430X_ST_TIMER) = abstime; -} - -/** - * @brief Returns the current alarm time. - * - * @return The currently set alarm time. - * - * @notapi - */ -static inline systime_t st_lld_get_alarm(void) { - - return MSP430X_ST_CCR(MSP430X_ST_TIMER); -} - -/** - * @brief Determines if the alarm is active. - * - * @return The alarm status. - * @retval false if the alarm is not active. - * @retval true is the alarm is active - * - * @notapi - */ -static inline bool st_lld_is_alarm_active(void) { - - return (bool)((MSP430X_ST_CCTL(MSP430X_ST_TIMER) & CCIE) != 0); -} - -#endif /* _ST_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/platform.mk deleted file mode 100644 index 832814b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/MSP430X/platform.mk +++ /dev/null @@ -1,10 +0,0 @@ -# List of all the MSP430X platform files. -PLATFORMSRC = ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_dma_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_spi_lld.c - -# Required include directories -PLATFORMINC = ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c deleted file mode 100644 index 7f3413c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51Fx22/adc_lld.c - * @brief NRF51Fx22 ADC subsystem low level driver source. - * - * @addtogroup ADC - * @{ - */ - -#include "hal.h" - -#if HAL_USE_ADC || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ -#define ADC_CHANNEL_MASK 0x7 - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief ADC1 driver identifier.*/ -#if NRF51_ADC_USE_ADC1 || defined(__DOXYGEN__) -ADCDriver ADCD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void adc_lld_config_next_channel(ADCDriver *adcp, uint32_t config) { - - /* Default to all analog input pins disabled */ - config &= ~ADC_CONFIG_PSEL_Msk; - - if (adcp->grpp->channel_mask) { - /* Skip to the next channel */ - while (((1 << adcp->current_channel) & adcp->grpp->channel_mask) == 0) - adcp->current_channel = (adcp->current_channel + 1) & ADC_CHANNEL_MASK; - config |= (((1 << adcp->current_channel) << ADC_CONFIG_PSEL_Pos) & ADC_CONFIG_PSEL_Msk); - } - - /* Setup analog input pin select and user config values */ - adcp->adc->CONFIG = config; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if NRF51_ADC_USE_ADC1 || defined(__DOXYGEN__) -/** - * @brief ADC interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector5C) { - - ADCDriver *adcp = &ADCD1; - NRF_ADC_Type *adc = adcp->adc; - bool more = true; - - OSAL_IRQ_PROLOGUE(); - - /* Clear the ADC event */ - adc->EVENTS_END = 0; - - /* Read the sample into the buffer */ - adcp->samples[adcp->current_index++] = adc->RESULT; - - /* At the end of the buffer then we may be finished */ - if (adcp->current_index == adcp->number_of_samples) { - _adc_isr_full_code(adcp); - - adcp->current_index = 0; - - /* We are never finished in circular mode */ - more = adcp->grpp->circular; - } - - if (more) { - - /* Signal half completion in circular mode. */ - if (adcp->grpp->circular && - (adcp->current_index == (adcp->number_of_samples / 2))) { - - _adc_isr_half_code(adcp); - } - - /* Skip to the next channel */ - adcp->current_channel = (adcp->current_channel + 1) & ADC_CHANNEL_MASK; - adc_lld_config_next_channel(adcp, adcp->adc->CONFIG); - adcp->adc->TASKS_START = 1; - } else { - adc_lld_stop_conversion(adcp); - } - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level ADC driver initialization. - * - * @notapi - */ -void adc_lld_init(void) { - -#if NRF51_ADC_USE_ADC1 - /* Driver initialization.*/ - adcObjectInit(&ADCD1); - ADCD1.adc = NRF_ADC; -#endif -} - -/** - * @brief Configures and activates the ADC peripheral. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_start(ADCDriver *adcp) { - - /* If in stopped state then configures and enables the ADC. */ - if (adcp->state == ADC_STOP) { -#if NRF51_ADC_USE_ADC1 - if (&ADCD1 == adcp) { - - adcp->adc->INTENSET = ADC_INTENSET_END_Enabled << ADC_INTENSET_END_Pos; - nvicEnableVector(ADC_IRQn, NRF51_ADC_IRQ_PRIORITY); - } -#endif /* NRF51_ADC_USE_ADC1 */ - } -} - -/** - * @brief Deactivates the ADC peripheral. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_stop(ADCDriver *adcp) { - - /* If in ready state then disables the ADC clock and analog part.*/ - if (adcp->state == ADC_READY) { - -#if NRF51_ADC_USE_ADC1 - if (&ADCD1 == adcp) { - - nvicDisableVector(ADC_IRQn); - adcp->adc->INTENCLR = ADC_INTENCLR_END_Clear << ADC_INTENCLR_END_Pos; - adc_lld_stop_conversion(adcp); - } -#endif - } -} - -/** - * @brief Starts an ADC conversion. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_start_conversion(ADCDriver *adcp) { - - NRF_ADC_Type *adc = adcp->adc; - - adcp->number_of_samples = adcp->depth * adcp->grpp->num_channels; - adcp->current_index = 0; - - /* At least one sample must be configured */ - osalDbgAssert(adcp->number_of_samples, "must configure at least one sample"); - - /* Skip to the next channel */ - adcp->current_channel = 0; - adc_lld_config_next_channel(adcp, adcp->grpp->cfg); - - /* Enable and start the conversion */ - adc->ENABLE = ADC_ENABLE_ENABLE_Enabled << ADC_ENABLE_ENABLE_Pos; - adc->TASKS_START = 1; -} - -/** - * @brief Stops an ongoing conversion. - * - * @param[in] adcp pointer to the @p ADCDriver object - * - * @notapi - */ -void adc_lld_stop_conversion(ADCDriver *adcp) { - - NRF_ADC_Type *adc = adcp->adc; - - adc->TASKS_STOP = 1; - adc->ENABLE = ADC_ENABLE_ENABLE_Disabled << ADC_ENABLE_ENABLE_Pos; -} - -#endif /* HAL_USE_ADC */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h deleted file mode 100644 index 36854fb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51x22/adc_lld.h - * @brief NRF51x22 ADC subsystem low level driver header. - * - * @addtogroup ADC - * @{ - */ - -#ifndef HAL_ADC_LLD_H -#define HAL_ADC_LLD_H - -#if HAL_USE_ADC || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief ADC1 driver enable switch. - * @details If set to @p TRUE the support for ADC1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_ADC_USE_ADC1) || defined(__DOXYGEN__) -#define NRF51_ADC_USE_ADC1 FALSE -#endif - -/** - * @brief ADC interrupt priority level setting. - */ -#if !defined(NRF51_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_ADC_IRQ_PRIORITY 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !NRF51_ADC_USE_ADC1 -#error "ADC driver activated but no ADC peripheral assigned" -#endif - -#if NRF51_ADC_USE_ADC1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_ADC_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to ADC1" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief ADC sample data type. - */ -typedef uint16_t adcsample_t; - -/** - * @brief Channels number in a conversion group. - */ -typedef uint8_t adc_channels_num_t; - -/** - * @brief Type of a structure representing an ADC driver. - */ -typedef struct ADCDriver ADCDriver; - -/** - * @brief ADC notification callback type. - * - * @param[in] adcp pointer to the @p ADCDriver object triggering the - * callback - * @param[in] buffer pointer to the most recent samples data - * @param[in] n number of buffer rows available starting from @p buffer - */ -typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n); - -/** - * @brief Conversion group configuration structure. - * @details This implementation-dependent structure describes a conversion - * operation. - * @note The use of this configuration structure requires knowledge of - * STM32 ADC cell registers interface, please refer to the STM32 - * reference manual for details. - */ -typedef struct { - /** - * @brief Enables the circular buffer mode for the group. - */ - bool circular; - /** - * @brief Number of the analog channels belonging to the conversion group. - */ - adc_channels_num_t num_channels; - /** - * @brief Callback function associated to the group or @p NULL. - */ - adccallback_t end_cb; - /* End of the mandatory fields.*/ - /** - * @brief Bitmask of channels for ADC conversion. - */ - uint32_t channel_mask; - /** - * @brief ADC CONFIG register details. - * @note All the required bits must be defined into this field. - */ - uint32_t cfg; -} ADCConversionGroup; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - uint32_t dummy; -} ADCConfig; - -/** - * @brief Structure representing an ADC driver. - */ -struct ADCDriver { - /** - * @brief Driver state. - */ - adcstate_t state; - /** - * @brief Current configuration data. - */ - const ADCConfig *config; - /** - * @brief Current samples buffer pointer or @p NULL. - */ - adcsample_t *samples; - /** - * @brief Current samples buffer depth or @p 0. - */ - size_t depth; - /** - * @brief Current conversion group pointer or @p NULL. - */ - const ADCConversionGroup *grpp; -#if ADC_USE_WAIT || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif -#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif /* ADC_USE_MUTUAL_EXCLUSION */ -#if defined(ADC_DRIVER_EXT_FIELDS) - ADC_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the ADCx registers block. - */ - NRF_ADC_Type *adc; - /** - * @brief Number of samples expected. - */ - size_t number_of_samples; - /** - * @brief Current position in the buffer. - */ - size_t current_index; - /** - * @brief Current channel index into group channel_mask. - */ - size_t current_channel; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if NRF51_ADC_USE_ADC1 && !defined(__DOXYGEN__) -extern ADCDriver ADCD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void adc_lld_init(void); - void adc_lld_start(ADCDriver *adcp); - void adc_lld_stop(ADCDriver *adcp); - void adc_lld_start_conversion(ADCDriver *adcp); - void adc_lld_stop_conversion(ADCDriver *adcp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_ADC */ - -#endif /* HAL_ADC_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c deleted file mode 100644 index 47736c7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/ext_lld.c - * @brief NRF51822 EXT subsystem low level driver source. - * - * @addtogroup EXT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -#include "hal_ext_lld_isr.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief EXTD1 driver identifier. - */ -EXTDriver EXTD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level EXT driver initialization. - * - * @notapi - */ -void ext_lld_init(void) { - - /* Driver initialization.*/ - extObjectInit(&EXTD1); -} - -/** - * @brief Configures and activates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_start(EXTDriver *extp) { - - unsigned i; - - ext_lld_exti_irq_enable(); - - /* Configuration of automatic channels.*/ - for (i = 0; i < EXT_MAX_CHANNELS; i++) { - uint32_t config = 0; - uint32_t pad = (extp->config->channels[i].mode & EXT_MODE_GPIO_MASK) - >> EXT_MODE_GPIO_OFFSET; - - if (extp->config->channels[i].mode & EXT_CH_MODE_BOTH_EDGES) - config |= (GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos); - else if (extp->config->channels[i].mode & EXT_CH_MODE_RISING_EDGE) - config |= (GPIOTE_CONFIG_POLARITY_LoToHi << GPIOTE_CONFIG_POLARITY_Pos); - else - config |= (GPIOTE_CONFIG_POLARITY_HiToLo << GPIOTE_CONFIG_POLARITY_Pos); - - config |= (pad << GPIOTE_CONFIG_PSEL_Pos); - - NRF_GPIOTE->CONFIG[i] = config; - NRF_GPIOTE->EVENTS_PORT = 0; - NRF_GPIOTE->EVENTS_IN[i] = 0; - - if (extp->config->channels[i].mode & EXT_CH_MODE_AUTOSTART) - ext_lld_channel_enable(extp, i); - else - ext_lld_channel_disable(extp, i); - } -} - -/** - * @brief Deactivates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_stop(EXTDriver *extp) { - - unsigned i; - - (void)extp; - ext_lld_exti_irq_disable(); - - for (i = 0; i < EXT_MAX_CHANNELS; i++) - NRF_GPIOTE->CONFIG[i] = 0; - - NRF_GPIOTE->INTENCLR = - (GPIOTE_INTENCLR_IN3_Msk | GPIOTE_INTENCLR_IN2_Msk | - GPIOTE_INTENCLR_IN1_Msk | GPIOTE_INTENCLR_IN0_Msk); -} - -/** - * @brief Enables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be enabled - * - * @notapi - */ -void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) { - - uint32_t config = NRF_GPIOTE->CONFIG[channel] & ~GPIOTE_CONFIG_MODE_Msk; - - (void)extp; - config |= (GPIOTE_CONFIG_MODE_Event << GPIOTE_CONFIG_MODE_Pos); - - NRF_GPIOTE->CONFIG[channel] = config; - NRF_GPIOTE->INTENSET = (1 << channel); -} - -/** - * @brief Disables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be disabled - * - * @notapi - */ -void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - NRF_GPIOTE->CONFIG[channel] &= ~GPIOTE_CONFIG_MODE_Msk; - NRF_GPIOTE->INTENCLR = (1 << channel); -} - -#endif /* HAL_USE_EXT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h deleted file mode 100644 index 37ae721..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/ext_lld.h - * @brief NRF51822 GPIOTE subsystem low level driver header. - * - * @addtogroup EXT - * @{ - */ - -#ifndef HAL_EXT_LLD_H -#define HAL_EXT_LLD_H - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Available number of EXT channels. - */ -#define EXT_MAX_CHANNELS 4 -#define EXT_MODE_GPIO_MASK 0xF8 /**< @brief Pad field mask. */ -#define EXT_MODE_GPIO_OFFSET 3 /**< @brief Pad field offset. */ -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief EXT channel identifier. - */ -typedef uint32_t expchannel_t; - -/** - * @brief Type of an EXT generic notification callback. - * - * @param[in] extp pointer to the @p EXPDriver object triggering the - * callback - */ -typedef void (*extcallback_t)(EXTDriver *extp, expchannel_t channel); - -/** - * @brief Channel configuration structure. - */ -typedef struct { - /** - * @brief Channel mode. - */ - uint32_t mode; - /** - * @brief Channel callback. - * @details In the STM32 implementation a @p NULL callback pointer is - * valid and configures the channel as an event sources instead - * of an interrupt source. - */ - extcallback_t cb; -} EXTChannelConfig; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Channel configurations. - */ - EXTChannelConfig channels[EXT_MAX_CHANNELS]; - /* End of the mandatory fields.*/ -} EXTConfig; - -/** - * @brief Structure representing an EXT driver. - */ -struct EXTDriver { - /** - * @brief Driver state. - */ - extstate_t state; - /** - * @brief Current configuration data. - */ - const EXTConfig *config; - /* End of the mandatory fields.*/ -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -extern EXTDriver EXTD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void ext_lld_init(void); - void ext_lld_start(EXTDriver *extp); - void ext_lld_stop(EXTDriver *extp); - void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel); - void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EXT */ - -#endif /* HAL_EXT_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c deleted file mode 100644 index 52f07d6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51x22/ext_lld_isr.h - * @brief NRF51x22 EXT subsystem low level driver ISR code. - * - * @addtogroup EXT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -#include "hal_ext_lld_isr.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/** - * @brief EXTI[0]...EXTI[1] interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector58) { - - OSAL_IRQ_PROLOGUE(); - - if (NRF_GPIOTE->EVENTS_IN[0]) - { - NRF_GPIOTE->EVENTS_IN[0] = 0; - EXTD1.config->channels[0].cb(&EXTD1, 0); - } - if (NRF_GPIOTE->EVENTS_IN[1]) - { - NRF_GPIOTE->EVENTS_IN[1] = 0; - EXTD1.config->channels[1].cb(&EXTD1, 1); - } - if (NRF_GPIOTE->EVENTS_IN[2]) - { - NRF_GPIOTE->EVENTS_IN[2] = 0; - EXTD1.config->channels[2].cb(&EXTD1, 2); - } - if (NRF_GPIOTE->EVENTS_IN[3]) - { - NRF_GPIOTE->EVENTS_IN[3] = 0; - EXTD1.config->channels[3].cb(&EXTD1, 3); - } - - OSAL_IRQ_EPILOGUE(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Enables EXTI IRQ sources. - * - * @notapi - */ -void ext_lld_exti_irq_enable(void) { - - nvicEnableVector(GPIOTE_IRQn, NRF51_EXT_GPIOTE_IRQ_PRIORITY); -} - -/** - * @brief Disables EXTI IRQ sources. - * - * @notapi - */ -void ext_lld_exti_irq_disable(void) { - - nvicDisableVector(GPIOTE_IRQn); -} - -#endif /* HAL_USE_EXT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h deleted file mode 100644 index 736e55c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51x22/ext_lld_isr.h - * @brief NRF51x22 EXT subsystem low level driver ISR header. - * - * @addtogroup EXT - * @{ - */ - -#ifndef HAL_EXT_LLD_ISR_H -#define HAL_EXT_LLD_ISR_H - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief GPIOTE interrupt priority level setting. - */ -#if !defined(NRF51_EXT_GPIOTE_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_EXT_GPIOTE_IRQ_PRIORITY 3 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void ext_lld_exti_irq_enable(void); - void ext_lld_exti_irq_disable(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EXT */ - -#endif /* HAL_EXT_LLD_ISR_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c deleted file mode 100644 index f39470f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - ChibiOS - 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51x22/gpt_lld.c - * @brief NRF51x22 GPT subsystem low level driver source. - * - * @addtogroup GPT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_GPT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define NRF51_TIMER_PRESCALER_NUM 10 -#define NRF51_TIMER_COMPARE_NUM 4 - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief GPTD1 driver identifier. - * @note The driver GPTD1 allocates the complex timer TIM1 when enabled. - */ -#if NRF51_GPT_USE_TIMER0 || defined(__DOXYGEN__) -GPTDriver GPTD1; -#endif - -/** - * @brief GPTD2 driver identifier. - * @note The driver GPTD2 allocates the timer TIM2 when enabled. - */ -#if NRF51_GPT_USE_TIMER1 || defined(__DOXYGEN__) -GPTDriver GPTD2; -#endif - -/** - * @brief GPTD3 driver identifier. - * @note The driver GPTD3 allocates the timer TIM3 when enabled. - */ -#if NRF51_GPT_USE_TIMER2 || defined(__DOXYGEN__) -GPTDriver GPTD3; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static uint8_t prescaler(uint16_t freq) -{ - uint8_t i; - static const gptfreq_t frequencies[] = { - NRF51_GPT_FREQ_16MHZ, - NRF51_GPT_FREQ_8MHZ, - NRF51_GPT_FREQ_4MHZ, - NRF51_GPT_FREQ_2MHZ, - NRF51_GPT_FREQ_1MHZ, - NRF51_GPT_FREQ_500KHZ, - NRF51_GPT_FREQ_250KHZ, - NRF51_GPT_FREQ_125KHZ, - NRF51_GPT_FREQ_62500HZ, - NRF51_GPT_FREQ_31250HZ, - }; - - for (i = 0; i < NRF51_TIMER_PRESCALER_NUM; i++) - if (freq == frequencies[i]) - return i; - - osalDbgAssert(FALSE, "invalid timer frequency"); - - return 0; -} - -/** - * @brief Shared IRQ handler. - * - * @param[in] gptp pointer to a @p GPTDriver object - */ -static void gpt_lld_serve_interrupt(GPTDriver *gptp) { - - gptp->tim->EVENTS_COMPARE[gptp->cc_int] = 0; - if (gptp->state == GPT_ONESHOT) - gptp->state = GPT_READY; /* Back in GPT_READY state. */ - gptp->config->callback(gptp); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if NRF51_GPT_USE_TIMER0 -/** - * @brief TIMER0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector60) { - - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD1); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* NRF51_GPT_USE_TIMER0 */ - -#if NRF51_GPT_USE_TIMER1 -/** - * @brief TIMER1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector64) { - - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD2); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* NRF51_GPT_USE_TIMER1 */ - -#if NRF51_GPT_USE_TIMER2 -/** - * @brief TIMER2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector68) { - - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD3); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* NRF51_GPT_USE_TIMER2 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level GPT driver initialization. - * - * @notapi - */ -void gpt_lld_init(void) { - -#if NRF51_GPT_USE_TIMER0 - /* Driver initialization.*/ - GPTD1.tim = NRF_TIMER0; - gptObjectInit(&GPTD1); -#endif - -#if NRF51_GPT_USE_TIMER1 - /* Driver initialization.*/ - GPTD2.tim = NRF_TIMER1; - gptObjectInit(&GPTD2); -#endif - -#if NRF51_GPT_USE_TIMER2 - /* Driver initialization.*/ - GPTD3.tim = NRF_TIMER2; - gptObjectInit(&GPTD3); -#endif -} - -/** - * @brief Configures and activates the GPT peripheral. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_start(GPTDriver *gptp) { - - NRF_TIMER_Type *tim = gptp->tim; - - if (gptp->state == GPT_STOP) { - osalDbgAssert(gptp->cc_int < NRF51_TIMER_COMPARE_NUM, - "invalid capture/compare index"); - - tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int; -#if NRF51_GPT_USE_TIMER0 - if (&GPTD1 == gptp) - nvicEnableVector(TIMER0_IRQn, NRF51_GPT_TIMER0_IRQ_PRIORITY); -#endif -#if NRF51_GPT_USE_TIMER1 - if (&GPTD2 == gptp) - nvicEnableVector(TIMER1_IRQn, NRF51_GPT_TIMER1_IRQ_PRIORITY); -#endif -#if NRF51_GPT_USE_TIMER2 - if (&GPTD3 == gptp) - nvicEnableVector(TIMER2_IRQn, NRF51_GPT_TIMER2_IRQ_PRIORITY); -#endif - } - - /* Prescaler value calculation.*/ - tim->PRESCALER = prescaler(gptp->config->frequency); - - /* Timer configuration.*/ - tim->MODE = TIMER_MODE_MODE_Timer << TIMER_MODE_MODE_Pos; - - switch (gptp->config->resolution) { - - case 8: - tim->BITMODE = TIMER_BITMODE_BITMODE_08Bit << TIMER_BITMODE_BITMODE_Pos; - break; - - case 16: - tim->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos; - break; - -#if NRF51_GPT_USE_TIMER0 - case 24: - tim->BITMODE = TIMER_BITMODE_BITMODE_24Bit << TIMER_BITMODE_BITMODE_Pos; - break; - - case 32: - tim->BITMODE = TIMER_BITMODE_BITMODE_32Bit << TIMER_BITMODE_BITMODE_Pos; - break; -#endif - - default: - osalDbgAssert(FALSE, "invalid timer resolution"); - break; - }; -} - -/** - * @brief Deactivates the GPT peripheral. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_stop(GPTDriver *gptp) { - - if (gptp->state == GPT_READY) { - gptp->tim->TASKS_SHUTDOWN = 1; - -#if NRF51_GPT_USE_TIMER0 - if (&GPTD1 == gptp) - nvicDisableVector(TIMER0_IRQn); -#endif -#if NRF51_GPT_USE_TIMER1 - if (&GPTD2 == gptp) - nvicDisableVector(TIMER1_IRQn); -#endif -#if NRF51_GPT_USE_TIMER2 - if (&GPTD3 == gptp) - nvicDisableVector(TIMER2_IRQn); -#endif - gptp->tim->INTENCLR = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int; - } -} - -/** - * @brief Starts the timer in continuous mode. - * - * @param[in] gptp pointer to the @p GPTDriver object - * @param[in] interval period in ticks - * - * @notapi - */ -void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) { - - NRF_TIMER_Type *tim = gptp->tim; - - tim->TASKS_CLEAR = 1; - tim->CC[gptp->cc_int] = (uint32_t)(interval - 1); /* Time constant. */ - if (gptp->state == GPT_ONESHOT) - gptp->tim->SHORTS = TIMER_SHORTS_COMPARE0_STOP_Msk << gptp->cc_int; - else if (gptp->state == GPT_CONTINUOUS) - gptp->tim->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Msk << gptp->cc_int; - tim->TASKS_START = 1; -} - -/** - * @brief Stops the timer. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_stop_timer(GPTDriver *gptp) { - - gptp->tim->TASKS_STOP = 1; -} - -/** - * @brief Starts the timer in one shot mode and waits for completion. - * @details This function specifically polls the timer waiting for completion - * in order to not have extra delays caused by interrupt servicing, - * this function is only recommended for short delays. - * - * @param[in] gptp pointer to the @p GPTDriver object - * @param[in] interval time interval in ticks - * - * @notapi - */ -void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) { - - NRF_TIMER_Type *tim = gptp->tim; - - tim->INTENCLR = (1UL << gptp->cc_int) << TIMER_INTENSET_COMPARE0_Pos; - tim->TASKS_CLEAR = 1; - tim->CC[gptp->cc_int] = (uint32_t)(interval - 1); /* Time constant. */ - tim->TASKS_START = 1; - while (!(tim->INTENSET & (TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int))) - ; - tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int; -} - -/** - * @brief Returns the counter value of GPT peripheral. - * @pre The GPT unit must be running in continuous mode. - * @note The nature of the counter is not defined, it may count upward - * or downward, it could be continuously running or not. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @return The current counter value. - * - * @notapi - */ -gptcnt_t gpt_lld_get_counter(GPTDriver *gptp) { - - gptp->tim->TASKS_CAPTURE[gptp->cc_get] = 1; - return gptp->tim->CC[gptp->cc_get]; -} - -#endif /* HAL_USE_GPT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h deleted file mode 100644 index 9b4cc9b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h +++ /dev/null @@ -1,264 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51x22/gpt_lld.h - * @brief NRF51x22 GPT subsystem low level driver header. - * - * @addtogroup GPT - * @{ - */ - -#ifndef HAL_GPT_LLD_H -#define HAL_GPT_LLD_H - -#if HAL_USE_GPT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief GPTD1 driver enable switch. - * @details If set to @p TRUE the support for GPTD1 is included. - * @note The default is @p TRUE. - */ -#if !defined(NRF51_GPT_USE_TIMER0) || defined(__DOXYGEN__) -#define NRF51_GPT_USE_TIMER0 FALSE -#endif - -/** - * @brief GPTD2 driver enable switch. - * @details If set to @p TRUE the support for GPTD2 is included. - * @note The default is @p TRUE. - */ -#if !defined(NRF51_GPT_USE_TIMER1) || defined(__DOXYGEN__) -#define NRF51_GPT_USE_TIMER1 FALSE -#endif - -/** - * @brief GPTD3 driver enable switch. - * @details If set to @p TRUE the support for GPTD3 is included. - * @note The default is @p TRUE. - */ -#if !defined(NRF51_GPT_USE_TIMER2) || defined(__DOXYGEN__) -#define NRF51_GPT_USE_TIMER2 FALSE -#endif - -/** - * @brief GPTD1 interrupt priority level setting. - */ -#if !defined(NRF51_GPT_TIMER0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_GPT_TIMER0_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPTD2 interrupt priority level setting. - */ -#if !defined(NRF51_GPT_TIMER1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_GPT_TIMER1_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPTD3 interrupt priority level setting. - */ -#if !defined(NRF51_GPT_TIMER2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_GPT_TIMER2_IRQ_PRIORITY 3 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !NRF51_GPT_USE_TIMER0 && !NRF51_GPT_USE_TIMER1 && \ - !NRF51_GPT_USE_TIMER2 -#error "GPT driver activated but no TIMER peripheral assigned" -#endif - -#if NRF51_GPT_USE_TIMER0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIMER0" -#endif - -#if NRF51_GPT_USE_TIMER1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIMER1" -#endif - -#if NRF51_GPT_USE_TIMER2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIMER2" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief GPT frequency type. - */ -typedef enum { - NRF51_GPT_FREQ_31250HZ = 31250, - NRF51_GPT_FREQ_62500HZ = 62500, - NRF51_GPT_FREQ_125KHZ = 125000, - NRF51_GPT_FREQ_250KHZ = 250000, - NRF51_GPT_FREQ_500KHZ = 500000, - NRF51_GPT_FREQ_1MHZ = 1000000, - NRF51_GPT_FREQ_2MHZ = 2000000, - NRF51_GPT_FREQ_4MHZ = 4000000, - NRF51_GPT_FREQ_8MHZ = 8000000, - NRF51_GPT_FREQ_16MHZ = 16000000, -} gptfreq_t; - -/** - * @brief GPT counter type. - */ -typedef uint32_t gptcnt_t; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - gptfreq_t frequency; - /** - * @brief Timer callback pointer. - * @note This callback is invoked on GPT counter events. - * @note This callback can be set to @p NULL but in that case the - * one-shot mode cannot be used. - */ - gptcallback_t callback; - /* End of the mandatory fields.*/ - /** - * @brief The timer resolution in bits (8/16/24/32) - * @note The default value of this field is 16 bits - * @note The 24 and 32 bit modes are only valid for TIMER0 - */ - uint8_t resolution; -} GPTConfig; - -/** - * @brief Structure representing a GPT driver. - */ -struct GPTDriver { - /** - * @brief Driver state. - */ - gptstate_t state; - /** - * @brief Current configuration data. - */ - const GPTConfig *config; -#if defined(GPT_DRIVER_EXT_FIELDS) - GPT_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the TIMERx registers block. - */ - NRF_TIMER_Type *tim; - /** - * @brief Index of the TIMERx capture/compare register used for setting the - * interval between compare events. - */ - uint8_t cc_int; - /** - * @brief Index of the TIMERx capture/compare register used for getting the - * current timer counter value. - */ - uint8_t cc_get; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the interval of GPT peripheral. - * @details This function changes the interval of a running GPT unit. - * @pre The GPT unit must be running in continuous mode. - * @post The GPT unit interval is changed to the new value. - * @note The function has effect at the next cycle start. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @param[in] interval new cycle time in timer ticks - * - * @notapi - */ -#define gpt_lld_change_interval(gptp, interval) \ - ((gptp)->tim->CC[(gptp)->cc_int] = (uint32_t)((interval) - 1)) - -/** - * @brief Returns the interval of GPT peripheral. - * @pre The GPT unit must be running in continuous mode. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @return The current interval. - * - * @notapi - */ -#define gpt_lld_get_interval(gptp) \ - ((gptcnt_t)((gptp)->tim->CC[(gptp)->cc_int]) + 1) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if NRF51_GPT_USE_TIMER0 && !defined(__DOXYGEN__) -extern GPTDriver GPTD1; -#endif - -#if NRF51_GPT_USE_TIMER1 && !defined(__DOXYGEN__) -extern GPTDriver GPTD2; -#endif - -#if NRF51_GPT_USE_TIMER2 && !defined(__DOXYGEN__) -extern GPTDriver GPTD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void gpt_lld_init(void); - void gpt_lld_start(GPTDriver *gptp); - void gpt_lld_stop(GPTDriver *gptp); - void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period); - void gpt_lld_stop_timer(GPTDriver *gptp); - void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval); - gptcnt_t gpt_lld_get_counter(GPTDriver *gptp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_GPT */ - -#endif /* HAL_GPT_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c deleted file mode 100644 index 611a004..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/i2c_lld.c - * @brief NRF51822 I2C subsystem low level driver source. - * - * @addtogroup I2C - * @{ - */ - -#include "osal.h" -#include "hal.h" -#include "nrf51_delay.h" - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/* These macros are needed to see if the slave is stuck and we as master send dummy clock cycles to end its wait */ -#define I2C_HIGH(p) do { NRF_GPIO->OUTSET = (1UL << (p)); } while(0) /*!< Pulls I2C line high */ -#define I2C_LOW(p) do { NRF_GPIO->OUTCLR = (1UL << (p)); } while(0) /*!< Pulls I2C line low */ -#define I2C_INPUT(p) do { NRF_GPIO->DIRCLR = (1UL << (p)); } while(0) /*!< Configures I2C pin as input */ -#define I2C_OUTPUT(p) do { NRF_GPIO->DIRSET = (1UL << (p)); } while(0) /*!< Configures I2C pin as output */ - -#define I2C_PIN_CNF \ - ((GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) \ - | (GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) \ - | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) \ - | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) \ - | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos)) - -#define I2C_PIN_CNF_CLR \ - ((GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) \ - | (GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) \ - | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) \ - | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) \ - | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos)) - -#if NRF51_I2C_USE_I2C0 -#define I2C_IRQ_NUM SPI0_TWI0_IRQn -#define I2C_IRQ_PRI NRF51_I2C_I2C0_IRQ_PRIORITY -#elif NRF51_I2C_USE_I2C1 -#define I2C_IRQ_NUM SPI1_TWI1_IRQn -#define I2C_IRQ_PRI NRF51_I2C_I2C1_IRQ_PRIORITY -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief I2C0 driver identifier. - */ -#if NRF51_I2C_USE_I2C0 || defined(__DOXYGEN__) -I2CDriver I2CD1; -#endif - -/** - * @brief I2C1 driver identifier. - */ -#if NRF51_I2C_USE_I2C1 || defined(__DOXYGEN__) -I2CDriver I2CD2; -#endif - -uint8_t tx_resume_count; -uint8_t rx_resume_count; -uint8_t stop_count; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Function for detecting stuck slaves (SDA = 0 and SCL = 1) and tries to clear the bus. - * - * @return - * @retval false Bus is stuck. - * @retval true Bus is clear. - */ -static void i2c_clear_bus(I2CDriver *i2cp) -{ - const I2CConfig *cfg = i2cp->config; - int i; - - NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF; - NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF; - - I2C_HIGH(cfg->sda_pad); - I2C_HIGH(cfg->scl_pad); - - NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR; - NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR; - - nrf_delay_us(4); - - for(i = 0; i < 9; i++) { - if (palReadPad(IOPORT1, cfg->sda_pad)) { - if(i > 0) - break; - else - return; - } - - I2C_LOW(cfg->scl_pad); - nrf_delay_us(4); - I2C_HIGH(cfg->scl_pad); - nrf_delay_us(4); - } - - I2C_LOW(cfg->sda_pad); - nrf_delay_us(4); - I2C_HIGH(cfg->sda_pad); -} - -static inline void i2c_setup_shortcut(I2CDriver *i2cp) -{ - uint32_t rxbytes = i2cp->rxbytes; - uint32_t txbytes = i2cp->txbytes; - - osalDbgAssert(rxbytes + txbytes, "transfer must be greater than zero"); - - if (txbytes > 1 || (!txbytes && rxbytes > 1)) - i2cp->i2c->SHORTS = TWI_SHORTS_BB_SUSPEND_Enabled << TWI_SHORTS_BB_SUSPEND_Pos; - else if (((txbytes == 1) && !rxbytes) || ((rxbytes == 1) && !txbytes)) - i2cp->i2c->SHORTS = TWI_SHORTS_BB_STOP_Enabled << TWI_SHORTS_BB_STOP_Pos; - else - i2cp->i2c->SHORTS = 0; -} - -#if defined(__GNUC__) -__attribute__((noinline)) -#endif -/** - * @brief Common IRQ handler. - * @note Tries hard to clear all the pending interrupt sources, we don't - * want to go through the whole ISR and have another interrupt soon - * after. - * - * @param[in] i2cp pointer to an I2CDriver - */ -static void serve_interrupt(I2CDriver *i2cp) { - - NRF_TWI_Type *i2c = i2cp->i2c; - - if(i2c->EVENTS_TXDSENT) { - - i2c->EVENTS_TXDSENT = 0; - - if(--i2cp->txbytes) { - - i2c->TXD = *i2cp->txptr++; - i2c_setup_shortcut(i2cp); - i2c->TASKS_RESUME = 1; - tx_resume_count++; - } - else if (i2cp->rxbytes) { - - i2c_setup_shortcut(i2cp); - i2c->TASKS_STARTRX = 1; - } - } - if(i2c->EVENTS_RXDREADY) { - - i2c->EVENTS_RXDREADY = 0; - *i2cp->rxptr++ = i2c->RXD; - - if(--i2cp->rxbytes) { - i2c_setup_shortcut(i2cp); - i2c->TASKS_RESUME = 1; - rx_resume_count++; - } - } - if(i2c->EVENTS_ERROR) { - - uint32_t err = i2c->ERRORSRC; - i2c->EVENTS_ERROR = 0; - - if (err & TWI_ERRORSRC_OVERRUN_Msk) - i2cp->errors |= I2C_OVERRUN; - if (err & (TWI_ERRORSRC_ANACK_Msk | TWI_ERRORSRC_DNACK_Msk)) - i2cp->errors |= I2C_ACK_FAILURE; - - i2c->TASKS_STOP = 1; - _i2c_wakeup_error_isr(i2cp); - } else if(i2c->EVENTS_STOPPED) { - - stop_count++; - i2c->EVENTS_STOPPED = 0; - _i2c_wakeup_isr(i2cp); - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if NRF51_I2C_USE_I2C0 || defined(__DOXYGEN__) - -OSAL_IRQ_HANDLER(Vector4C) { - - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&I2CD1); - OSAL_IRQ_EPILOGUE(); -} - -#endif - -#if NRF51_I2C_USE_I2C1 || defined(__DOXYGEN__) - -OSAL_IRQ_HANDLER(Vector50) { - - OSAL_IRQ_PROLOGUE(); - serve_interrupt(&I2CD2); - OSAL_IRQ_EPILOGUE(); -} - -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level I2C driver initialization. - * - * @notapi - */ -void i2c_lld_init(void) { - -#if NRF51_I2C_USE_I2C0 - i2cObjectInit(&I2CD1); - I2CD1.thread = NULL; - I2CD1.i2c = NRF_TWI0; -#endif - -#if NRF51_I2C_USE_I2C1 - i2cObjectInit(&I2CD2); - I2CD2.thread = NULL; - I2CD2.i2c = NRF_TWI1; -#endif - -} - -/** - * @brief Configures and activates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_start(I2CDriver *i2cp) { - - NRF_TWI_Type *i2c = i2cp->i2c; - const I2CConfig *cfg = i2cp->config; - - if (i2cp->state != I2C_STOP) - return; - - i2c_clear_bus(i2cp); - - NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF; - NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF; - - i2c->EVENTS_RXDREADY = 0; - i2c->EVENTS_TXDSENT = 0; - i2c->PSELSCL = cfg->scl_pad; - i2c->PSELSDA = cfg->sda_pad; - - switch (cfg->clock) { - case 100000: - i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K100 << TWI_FREQUENCY_FREQUENCY_Pos; - break; - case 250000: - i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K250 << TWI_FREQUENCY_FREQUENCY_Pos; - break; - case 400000: - i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K400 << TWI_FREQUENCY_FREQUENCY_Pos; - break; - default: - osalDbgAssert(0, "invalid I2C frequency"); - break; - }; - - nvicEnableVector(I2C_IRQ_NUM, I2C_IRQ_PRI); - - i2c->INTENSET = TWI_INTENSET_TXDSENT_Msk | TWI_INTENSET_STOPPED_Msk | - TWI_INTENSET_ERROR_Msk | TWI_INTENSET_RXDREADY_Msk; - - i2c->ENABLE = TWI_ENABLE_ENABLE_Enabled << TWI_ENABLE_ENABLE_Pos; -} - -/** - * @brief Deactivates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_stop(I2CDriver *i2cp) { - - NRF_TWI_Type *i2c = i2cp->i2c; - const I2CConfig *cfg = i2cp->config; - - if (i2cp->state != I2C_STOP) { - - i2c->ENABLE = TWI_ENABLE_ENABLE_Disabled << TWI_ENABLE_ENABLE_Pos; - - i2c->INTENCLR = TWI_INTENSET_TXDSENT_Msk | TWI_INTENSET_STOPPED_Msk | - TWI_INTENSET_ERROR_Msk | TWI_INTENSET_RXDREADY_Msk; - - nvicDisableVector(I2C_IRQ_NUM); - - NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR; - NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR; - } -} - -static inline msg_t _i2c_txrx_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) { - - NRF_TWI_Type *i2c = i2cp->i2c; - - (void)timeout; - msg_t msg; - - i2cp->errors = I2C_NO_ERROR; - i2cp->addr = addr; - - i2cp->txptr = txbuf; - i2cp->txbytes = txbytes; - - i2cp->rxptr = rxbuf; - i2cp->rxbytes = rxbytes; - - i2c->ADDRESS = addr; - - tx_resume_count = 0; - rx_resume_count = 0; - stop_count = 0; - - if (i2cp->txbytes) { - - i2c->TXD = *i2cp->txptr++; - i2c_setup_shortcut(i2cp); - i2c->TASKS_STARTTX = 1; - } else if (i2cp->rxbytes) { - - i2c_setup_shortcut(i2cp); - i2c->TASKS_STARTRX = 1; - } else { - - osalDbgAssert(0, "no bytes to transfer"); - } - - msg = osalThreadSuspendTimeoutS(&i2cp->thread, timeout); - - if (msg == MSG_TIMEOUT) - i2c->TASKS_STOP = 1; - - return msg; -} - -/** - * @brief Receives data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] addr slave device address - * @param[out] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_INFINITE no timeout. - * . - * @return The operation status. - * @retval MSG_OK if the function succeeded. - * @retval MSG_RESET if one or more I2C errors occurred, the errors can - * be retrieved using @p i2cGetErrors(). - * @retval MSG_TIMEOUT if a timeout occurred before operation end. After a - * timeout the driver must be stopped and restarted - * because the bus is in an uncertain state. - * - * @notapi - */ -msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) { - - return _i2c_txrx_timeout(i2cp, addr, NULL, 0, rxbuf, rxbytes, timeout); -} - -/** - * @brief Transmits data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] addr slave device address - * @param[in] txbuf pointer to the transmit buffer - * @param[in] txbytes number of bytes to be transmitted - * @param[out] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_INFINITE no timeout. - * . - * @return The operation status. - * @retval MSG_OK if the function succeeded. - * @retval MSG_RESET if one or more I2C errors occurred, the errors can - * be retrieved using @p i2cGetErrors(). - * @retval MSG_TIMEOUT if a timeout occurred before operation end. After a - * timeout the driver must be stopped and restarted - * because the bus is in an uncertain state. - * - * @notapi - */ -msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) { - - return _i2c_txrx_timeout(i2cp, addr, txbuf, txbytes, rxbuf, rxbytes, timeout); -} - -#endif /* HAL_USE_I2C */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h deleted file mode 100644 index e2c3d07..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/i2c_lld.h - * @brief NRF51822 I2C subsystem low level driver header. - * - * @addtogroup I2C - * @{ - */ - -#ifndef HAL_I2C_LLD_H -#define HAL_I2C_LLD_H - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define STATE_STOP 0x00 -#define STATE_SEND 0x01 -#define STATE_RECV 0x02 -#define STATE_DUMMY 0x03 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief I2C0 driver enable switch. - * @details If set to @p TRUE the support for I2C0 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_I2C_USE_I2C0) || defined(__DOXYGEN__) -#define NRF51_I2C_USE_I2C0 FALSE -#endif - -/** - * @brief I2C1 driver enable switch. - * @details If set to @p TRUE the support for I2C1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_I2C_USE_I2C1) || defined(__DOXYGEN__) -#define NRF51_I2C_USE_I2C1 FALSE -#endif - -/** - * @brief I2C0 interrupt priority level setting. - */ -#if !defined(NRF51_I2C_I2C0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_I2C_I2C0_IRQ_PRIORITY 3 -#endif - -/** - * @brief I2C1 interrupt priority level setting. - */ -#if !defined(NRF51_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_I2C_I2C1_IRQ_PRIORITY 3 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if NRF51_I2C_USE_I2C0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_I2C_I2C0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C0" -#endif - -#if NRF51_I2C_USE_I2C1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_I2C_I2C1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C1" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/* @brief Type representing I2C address. */ -typedef uint8_t i2caddr_t; - -/* @brief Type of I2C Driver condition flags. */ -typedef uint32_t i2cflags_t; - -/* @brief Type used to control the ISR state machine. */ -typedef uint8_t intstate_t; - -/** - * @brief Driver configuration structure. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ - -/** - * @brief Driver configuration structure. - */ -typedef struct { - - /* @brief Clock to be used for the I2C bus. */ - uint32_t clock; - /* @brief Pad number for SCL */ - uint8_t scl_pad; - /* @brief Pad number for SDA */ - uint8_t sda_pad; - -} I2CConfig; - -/** - * @brief Type of a structure representing an I2C driver. - */ -typedef struct I2CDriver I2CDriver; - -/** - * @brief Structure representing an I2C driver. - */ -struct I2CDriver { - /** - * @brief Driver state. - */ - i2cstate_t state; - /** - * @brief Current configuration data. - */ - const I2CConfig *config; - /** - * @brief Error flags. - */ - i2cflags_t errors; -#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) -#if CH_CFG_USE_MUTEXES || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#elif CH_CFG_USE_SEMAPHORES - semaphore_t semaphore; -#endif -#endif /* I2C_USE_MUTUAL_EXCLUSION */ -#if defined(I2C_DRIVER_EXT_FIELDS) - I2C_DRIVER_EXT_FIELDS -#endif - /* @brief Thread waiting for I/O completion. */ - thread_reference_t thread; - /* @brief Current slave address without R/W bit. */ - i2caddr_t addr; - - /* End of the mandatory fields.*/ - - /* @brief Pointer to the buffer with data to send. */ - const uint8_t *txptr; - /* @brief Number of bytes of data to send. */ - size_t txbytes; - /* @brief Pointer to the buffer to put received data. */ - uint8_t *rxptr; - /* @brief Number of bytes of data to receive. */ - size_t rxbytes; - /* @brief Tracks current ISR state. */ - intstate_t intstate; - /* @brief Low-level register access. */ - NRF_TWI_Type *i2c; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Get errors from I2C driver. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -#define i2c_lld_get_errors(i2cp) ((i2cp)->errors) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) - -#if NRF51_I2C_USE_I2C0 -extern I2CDriver I2CD1; -#endif - -#if NRF51_I2C_USE_I2C1 -extern I2CDriver I2CD2; -#endif - -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void i2c_lld_init(void); - void i2c_lld_start(I2CDriver *i2cp); - void i2c_lld_stop(I2CDriver *i2cp); - msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout); - msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_I2C */ - -#endif /* HAL_I2C_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c deleted file mode 100644 index af5e377..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/NRF51822/hal_lld.c - * @brief NRF51822 HAL Driver subsystem low level driver source. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * - * @notapi - */ -void hal_lld_init(void) -{ - /* High frequency clock initialisation - * (If NRF51_XTAL_VALUE is not defined assume its an RC oscillator) - */ - NRF_CLOCK->TASKS_HFCLKSTOP = 1; -#if defined(NRF51_XTAL_VALUE) -#if NRF51_XTAL_VALUE == 16000000 - NRF_CLOCK->XTALFREQ = 0xFF; -#elif NRF51_XTAL_VALUE == 32000000 - NRF_CLOCK->XTALFREQ = 0x00; -#endif -#endif - - - /* Low frequency clock initialisation - * Clock is only started if st driver requires it - */ - NRF_CLOCK->TASKS_LFCLKSTOP = 1; - NRF_CLOCK->LFCLKSRC = NRF51_LFCLK_SOURCE; - -#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) && \ - (NRF51_SYSTEM_TICKS == NRF51_SYSTEM_TICKS_AS_RTC) - NRF_CLOCK->TASKS_LFCLKSTART = 1; -#endif -} - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h deleted file mode 100644 index e404020..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/NRF51822/hal_lld.h - * @brief NRF51822 HAL subsystem low level driver header. - * - * @addtogroup HAL - * @{ - */ - -#ifndef HAL_LLD_H -#define HAL_LLD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name Platform identification - * @{ - */ -#define PLATFORM_NAME "Nordic Semiconductor nRF51822" - -/** - * @} - */ - -/** - * @brief Frequency valuefor the Low Frequency Clock - */ -#define NRF51_LFCLK_FREQUENCY 32768 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief Select source of Low Frequency Clock (LFCLK) - * @details Possible values for source are: - * 0 : RC oscillator - * 1 : External cristal - * 2 : Synthetized clock from High Frequency Clock (HFCLK) - * When cristal is not available it's preferable to use the - * internal RC oscillator that synthezing the clock. - */ -#if !defined(NRF51_LFCLK_SOURCE) || defined(__DOXYGEN__) -#define NRF51_LFCLK_SOURCE 0 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if (NRF51_LFCLK_SOURCE < 0) || (NRF51_LFCLK_SOURCE > 2) -#error "Possible value for NRF51_LFCLK_SOURCE are 0=RC, 1=XTAL, 2=Synth" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#include "nvic.h" - -#define NRF51_LFCLK_FREQUENCY 32768 -#define NRF51_HFCLK_FREQUENCY 16000000 - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); - void nrf51_clock_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_LLD_H */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c deleted file mode 100644 index 69fc9fe..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file pal_lld.c - * @brief NRF51822 PAL subsystem low level driver source. - * - * @addtogroup PAL - * @{ - */ - -#include "osal.h" -#include "hal.h" - -#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) -{ - (void)port; - osalDbgAssert(pad <= 31, "pal_lld_setpadmode() - invalid pad"); - - switch (mode) { - case PAL_MODE_RESET: - case PAL_MODE_UNCONNECTED: - NRF_GPIO->PIN_CNF[pad] = - (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | - (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) | - (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) | - (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos) | - (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos); - break; - case PAL_MODE_INPUT: - case PAL_MODE_INPUT_ANALOG: - NRF_GPIO->PIN_CNF[pad] = - (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | - (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) | - (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) | - (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | - (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos); - break; - case PAL_MODE_INPUT_PULLUP: - NRF_GPIO->PIN_CNF[pad] = - (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | - (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) | - (GPIO_PIN_CNF_PULL_Pullup << GPIO_PIN_CNF_PULL_Pos) | - (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | - (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos); - break; - case PAL_MODE_INPUT_PULLDOWN: - NRF_GPIO->PIN_CNF[pad] = - (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | - (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) | - (GPIO_PIN_CNF_PULL_Pulldown << GPIO_PIN_CNF_PULL_Pos) | - (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | - (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos); - break; - case PAL_MODE_OUTPUT_PUSHPULL: - NRF_GPIO->PIN_CNF[pad] = - (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | - (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) | - (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) | - (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos) | - (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos); - break; - case PAL_MODE_OUTPUT_OPENDRAIN: - NRF_GPIO->PIN_CNF[pad] = - (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | - (GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) | - (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) | - (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos) | - (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos); - break; - default: - osalDbgAssert(FALSE, "invalid pal mode"); - break; - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief NRF51 I/O ports configuration. - * - * @param[in] config the NRF51 ports configuration - * - * @notapi - */ -void _pal_lld_init(const PALConfig *config) -{ - uint8_t i; - - for (i = 0; i < TOTAL_GPIO_PADS; i++) { - pal_lld_setpadmode(IOPORT1, i, config->pads[i]); - } -} - -/** - * @brief Pads mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @notapi - */ -void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode) -{ - uint8_t i; - - for (i = 0; i < TOTAL_GPIO_PADS; i++, mask >>= 1) { - if (mask & 1) { - pal_lld_setpadmode(port, i, mode); - } - } -} - -#endif /* HAL_USE_PAL == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h deleted file mode 100644 index 5032916..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file pal_lld.h - * @brief NRF51822 PAL subsystem low level driver header. - * - * @addtogroup PAL - * @{ - */ - -#ifndef HAL_PAL_LLD_H -#define HAL_PAL_LLD_H - -#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Unsupported modes and specific modes */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* I/O Ports Types and constants. */ -/*===========================================================================*/ - -#define TOTAL_GPIO_PADS 32 - -/** - * @name Port related definitions - * @{ - */ -/** - * @brief Width, in bits, of an I/O port. - */ -#define PAL_IOPORTS_WIDTH 32U - -/** - * @brief Whole port mask. - * @brief This macro specifies all the valid bits into a port. - */ -#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFFU) -/** @} */ - -/** - * @name Line handling macros - * @{ - */ -/** - * @brief Forms a line identifier. - * @details A port/pad pair are encoded into an @p ioline_t type. The encoding - * of this type is platform-dependent. - */ -#define PAL_LINE(port, pad) \ - ((ioline_t)((uint32_t)(pad))) - -/** - * @brief Decodes a port identifier from a line identifier. - */ -#define PAL_PORT(line) \ - ((ioportid_t)(IOPORT1)) - -/** - * @brief Decodes a pad identifier from a line identifier. - */ -#define PAL_PAD(line) \ - ((uint32_t)(line)) - -/** - * @brief Value identifying an invalid line. - */ -#define PAL_NOLINE ((ioline_t)-1) -/** @} */ - -/** - * @brief Generic I/O ports static initializer. - * @details An instance of this structure must be passed to @p palInit() at - * system startup time in order to initialized the digital I/O - * subsystem. This represents only the initial setup, specific pads - * or whole ports can be reprogrammed at later time. - * @note Implementations may extend this structure to contain more, - * architecture dependent, fields. - */ -typedef struct { - uint32_t pads[TOTAL_GPIO_PADS]; -} PALConfig; - -/** - * @brief Digital I/O port sized unsigned type. - */ -typedef uint32_t ioportmask_t; - -/** - * @brief Digital I/O modes. - */ -typedef uint8_t iomode_t; - -/** - * @brief Type of an I/O line. - */ -typedef uint32_t ioline_t; - -/** - * @brief Port Identifier. - * @details This type can be a scalar or some kind of pointer, do not make - * any assumption about it, use the provided macros when populating - * variables of this type. - */ -typedef NRF_GPIO_Type *ioportid_t; - -/*===========================================================================*/ -/* I/O Ports Identifiers. */ -/*===========================================================================*/ - -/** - * @brief First I/O port identifier. - * @details Low level drivers can define multiple ports, it is suggested to - * use this naming convention. - */ -#define IOPORT1 NRF_GPIO - -/*===========================================================================*/ -/* Implementation, some of the following macros could be implemented as */ -/* functions, if so please put them in pal_lld.c. */ -/*===========================================================================*/ - -/** - * @brief Low level PAL subsystem initialization. - * - * @param[in] config architecture-dependent ports configuration - * - * @notapi - */ -#define pal_lld_init(config) _pal_lld_init(config) - -/** - * @brief Reads the physical I/O port states. - * - * @param[in] port port identifier - * @return The port bits. - * - * @notapi - */ -#define pal_lld_readport(port) (NRF_GPIO->IN) - -/** - * @brief Reads the output latch. - * @details The purpose of this function is to read back the latched output - * value. - * - * @param[in] port port identifier - * @return The latched logical states. - * - * @notapi - */ -#define pal_lld_readlatch(port) (NRF_GPIO->OUT) - -/** - * @brief Writes a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be written on the specified port - * - * @notapi - */ -#define pal_lld_writeport(port, bits) (NRF_GPIO->OUT = (bits)) - -/** - * @brief Sets a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be ORed on the specified port - * - * @notapi - */ -#define pal_lld_setport(port, bits) (NRF_GPIO->OUTSET = (bits)) - - -/** - * @brief Clears a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be cleared on the specified port - * - * @notapi - */ -#define pal_lld_clearport(port, bits) (NRF_GPIO->OUTCLR = (bits)) - -/** - * @brief Pads group mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] mode group mode - * - * @notapi - */ -#define pal_lld_setgroupmode(port, mask, offset, mode) \ - _pal_lld_setgroupmode(port, mask << offset, mode) - -/** - * @brief Reads a logical state from an I/O pad. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @return The logical state. - * @retval PAL_LOW low logical state. - * @retval PAL_HIGH high logical state. - * - * @notapi - */ -#define pal_lld_readpad(port, pad) \ - ((NRF_GPIO->IN & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW) - -/** - * @brief Writes a logical state on an output pad. - * @note This function is not meant to be invoked directly by the - * application code. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] bit logical value, the value must be @p PAL_LOW or - * @p PAL_HIGH - * - * @notapi - */ -#define pal_lld_writepad(port, pad, bit) \ - do { \ - (void)port; \ - if (bit == PAL_HIGH) \ - NRF_GPIO->OUTSET = ((uint32_t) 1 << pad); \ - else \ - NRF_GPIO->OUTCLR = ((uint32_t) 1 << pad); \ - } while (false) - -/** - * @brief Sets a pad logical state to @p PAL_HIGH. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_setpad(port, pad) (NRF_GPIO->OUTSET = (uint32_t) 1 << (pad)) - -/** - * @brief Clears a pad logical state to @p PAL_LOW. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_clearpad(port, pad) (NRF_GPIO->OUTCLR = (uint32_t) 1 << (pad)) - -/** - * @brief Toggles a pad logical state. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_togglepad(port, pad) \ - do { \ - uint8_t bit = (NRF_GPIO->IN >> (pad)) & 1; \ - if (bit) \ - NRF_GPIO->OUTCLR = 1 << (pad); \ - else \ - NRF_GPIO->OUTSET = 1 << (pad); \ - } while (0) - -/** - * @brief Pad mode setup. - * @details This function programs a pad with the specified mode. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] mode pad mode - * - * @notapi - */ -#define pal_lld_setpadmode(port, pad, mode) _pal_lld_setpadmode(port, pad, mode) - -#if !defined(__DOXYGEN__) -extern const PALConfig pal_default_config; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void _pal_lld_init(const PALConfig *config); - void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode); - void _pal_lld_setpadmode(ioportid_t port, - uint8_t pad, - iomode_t mode); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PAL == TRUE */ - -#endif /* HAL_PAL_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c deleted file mode 100644 index 456dcff..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c +++ /dev/null @@ -1,425 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2016 Stéphane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_pwm_lld.c - * @brief NRF51 PWM subsystem low level driver source. - * - * @addtogroup PWM - * @{ - */ - -#include "hal.h" - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief PWMD1 driver identifier. - * @note The driver PWMD1 allocates the timer TIMER0 when enabled. - */ -#if NRF51_PWM_USE_TIMER0 || defined(__DOXYGEN__) -PWMDriver PWMD1; -#endif - -/** - * @brief PWMD2 driver identifier. - * @note The driver PWMD2 allocates the timer TIMER1 when enabled. - */ -#if NRF51_PWM_USE_TIMER1 || defined(__DOXYGEN__) -PWMDriver PWMD2; -#endif - -/** - * @brief PWMD3 driver identifier. - * @note The driver PWMD3 allocates the timer TIMER2 when enabled. - */ -#if NRF51_PWM_USE_TIMER2 || defined(__DOXYGEN__) -PWMDriver PWMD3; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void pwm_lld_serve_interrupt(PWMDriver *pwmp) { - // Deal with PWM channels - uint8_t n; - for (n = 0 ; n < pwmp->channels ; n++) { - if (pwmp->timer->EVENTS_COMPARE[n]) { - pwmp->timer->EVENTS_COMPARE[n] = 0; - - if (pwmp->config->channels[n].callback != NULL) { - pwmp->config->channels[n].callback(pwmp); - } - } - } - - // Deal with PWM period - if (pwmp->timer->EVENTS_COMPARE[pwmp->channels]) { - pwmp->timer->EVENTS_COMPARE[pwmp->channels] = 0; - - if (pwmp->config->callback != NULL) { - pwmp->config->callback(pwmp); - } - } - -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if NRF51_PWM_USE_TIMER0 -/** - * @brief TIMER0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector60) { - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD1); - OSAL_IRQ_EPILOGUE(); -} -#endif /* NRF51_PWM_USE_TIMER0 */ - -#if NRF51_PWM_USE_TIMER1 -/** - * @brief TIMER1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector64) { - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD2); - OSAL_IRQ_EPILOGUE(); -} -#endif /* NRF51_PWM_USE_TIMER1 */ - -#if NRF51_PWM_USE_TIMER2 -/** - * @brief TIMER2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector68) { - OSAL_IRQ_PROLOGUE(); - pwm_lld_serve_interrupt(&PWMD3); - OSAL_IRQ_EPILOGUE(); -} -#endif /* NRF51_PWM_USE_TIMER2 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level PWM driver initialization. - * - * @notapi - */ -void pwm_lld_init(void) { - -#if NRF51_PWM_USE_TIMER0 - pwmObjectInit(&PWMD1); - PWMD1.channels = PWM_CHANNELS; - PWMD1.timer = NRF_TIMER0; -#endif - -#if NRF51_PWM_USE_TIMER1 - pwmObjectInit(&PWMD2); - PWMD2.channels = PWM_CHANNELS; - PWMD2.timer = NRF_TIMER1; -#endif - -#if NRF51_PWM_USE_TIMER2 - pwmObjectInit(&PWMD3); - PWMD3.channels = PWM_CHANNELS; - PWMD3.timer = NRF_TIMER2; -#endif -} - -/** - * @brief Configures and activates the PWM peripheral. - * @note Starting a driver that is already in the @p PWM_READY state - * disables all the active channels. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_start(PWMDriver *pwmp) { - // Prescaler value calculation: ftimer = 16MHz / 2^PRESCALER - uint16_t psc_ratio = NRF51_HFCLK_FREQUENCY / pwmp->config->frequency; - // Prescaler ratio must be between 1 and 512, and a power of two. - osalDbgAssert(psc_ratio <= 512 && !(psc_ratio & (psc_ratio - 1)), - "invalid frequency"); - // Prescaler value as a power of 2, must be 0..9 - uint32_t psc_value; - for (psc_value = 0; psc_value < 10; psc_value++) - if (psc_ratio == (unsigned)(1 << psc_value)) - break; - - - // Configure as 16bits timer (only TIMER0 support 32bits) - pwmp->timer->BITMODE = TIMER_BITMODE_BITMODE_16Bit; - pwmp->timer->MODE = TIMER_MODE_MODE_Timer; - - // With clear shortcuts for period - pwmp->timer->SHORTS = - 0x1UL << (TIMER_SHORTS_COMPARE0_CLEAR_Pos + pwmp->channels); - - // Disable and reset interrupts for compare events - pwmp->timer->INTENCLR = (TIMER_INTENCLR_COMPARE0_Msk | - TIMER_INTENCLR_COMPARE1_Msk | - TIMER_INTENCLR_COMPARE2_Msk | - TIMER_INTENCLR_COMPARE3_Msk ); - pwmp->timer->EVENTS_COMPARE[0] = 0; - pwmp->timer->EVENTS_COMPARE[1] = 0; - pwmp->timer->EVENTS_COMPARE[2] = 0; - pwmp->timer->EVENTS_COMPARE[3] = 0; - - // Set prescaler - pwmp->timer->PRESCALER = psc_value; - - // Set period - pwmp->timer->CC[pwmp->channels] = pwmp->period; - - // Clear everything - pwmp->timer->TASKS_CLEAR = 1; - - - // Enable interrupt -#if NRF51_PWM_USE_TIMER0 - if (&PWMD1 == pwmp) { - nvicEnableVector(TIMER0_IRQn, NRF51_PWM_TIMER0_PRIORITY); - } -#endif - -#if NRF51_PWM_USE_TIMER1 - if (&PWMD2 == pwmp) { - nvicEnableVector(TIMER1_IRQn, NRF51_PWM_TIMER1_PRIORITY); - } -#endif - -#if NRF51_PWM_USE_TIMER2 - if (&PWMD3 == pwmp) { - nvicEnableVector(TIMER2_IRQn, NRF51_PWM_TIMER2_PRIORITY); - } -#endif - - // Start timer - pwmp->timer->TASKS_START = 1; -} - -/** - * @brief Deactivates the PWM peripheral. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_stop(PWMDriver *pwmp) { - pwmp->timer->TASKS_STOP = 1; - -#if NRF51_PWM_USE_TIMER0 - if (&PWMD1 == pwmp) { - nvicDisableVector(TIMER0_IRQn); - } -#endif - -#if NRF51_PWM_USE_TIMER1 - if (&PWMD2 == pwmp) { - nvicDisableVector(TIMER1_IRQn); - } -#endif - -#if NRF51_PWM_USE_TIMER2 - if (&PWMD3 == pwmp) { - nvicDisableVector(TIMER2_IRQn); - } -#endif -} - -/** - * @brief Enables a PWM channel. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is active using the specified configuration. - * @note The function has effect at the next cycle start. - * @note Channel notification is not enabled. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * @param[in] width PWM pulse width as clock pulses number - * - * @notapi - */ -void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width) { -#if NRF51_PWM_USE_GPIOTE_PPI - const PWMChannelConfig *cfg_channel = &pwmp->config->channels[channel]; - - uint32_t outinit; - switch(cfg_channel->mode & PWM_OUTPUT_MASK) { - case PWM_OUTPUT_ACTIVE_LOW: - outinit = GPIOTE_CONFIG_OUTINIT_Low; - break; - case PWM_OUTPUT_ACTIVE_HIGH: - outinit = GPIOTE_CONFIG_OUTINIT_High; - break; - case PWM_OUTPUT_DISABLED: - default: - goto no_output_config; - } - - const uint32_t gpio_pin = PAL_PAD(cfg_channel->ioline); - const uint8_t gpiote_channel = cfg_channel->gpiote_channel; - const uint8_t *ppi_channel = cfg_channel->ppi_channel; - const uint32_t polarity = GPIOTE_CONFIG_POLARITY_Toggle; - - // Create GPIO Task - NRF_GPIOTE->CONFIG[gpiote_channel] = GPIOTE_CONFIG_MODE_Task | - ((gpio_pin << GPIOTE_CONFIG_PSEL_Pos ) & GPIOTE_CONFIG_PSEL_Msk) | - ((polarity << GPIOTE_CONFIG_POLARITY_Pos) & GPIOTE_CONFIG_POLARITY_Msk) | - ((outinit << GPIOTE_CONFIG_OUTINIT_Pos ) & GPIOTE_CONFIG_OUTINIT_Msk); - - // Program tasks (one for duty cycle, one for periode) - NRF_PPI->CH[ppi_channel[0]].EEP = - (uint32_t)&pwmp->timer->EVENTS_COMPARE[channel]; - NRF_PPI->CH[ppi_channel[0]].TEP = - (uint32_t)&NRF_GPIOTE->TASKS_OUT[gpiote_channel]; - NRF_PPI->CH[ppi_channel[1]].EEP = - (uint32_t)&pwmp->timer->EVENTS_COMPARE[pwmp->channels]; - NRF_PPI->CH[ppi_channel[1]].TEP = - (uint32_t)&NRF_GPIOTE->TASKS_OUT[gpiote_channel]; - NRF_PPI->CHENSET = ((1 << ppi_channel[0]) | (1 << ppi_channel[1])); - - no_output_config: -#endif - - pwmp->timer->CC[channel] = width; -} - -/** - * @brief Disables a PWM channel and its notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is disabled and its output line returned to the - * idle state. - * @note The function has effect at the next cycle start. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) { - pwmp->timer->CC[channel] = 0; -#if NRF51_PWM_USE_GPIOTE_PPI - const PWMChannelConfig *cfg_channel = &pwmp->config->channels[channel]; - switch(cfg_channel->mode & PWM_OUTPUT_MASK) { - case PWM_OUTPUT_ACTIVE_LOW: - case PWM_OUTPUT_ACTIVE_HIGH: { - const uint8_t gpiote_channel = cfg_channel->gpiote_channel; - const uint8_t *ppi_channel = cfg_channel->ppi_channel; - NRF_PPI->CHENCLR = ((1 << ppi_channel[0]) | (1 << ppi_channel[1])); - NRF_GPIOTE->CONFIG[gpiote_channel] = GPIOTE_CONFIG_MODE_Disabled; - break; - } - case PWM_OUTPUT_DISABLED: - default: - break; - } -#endif -} - -/** - * @brief Enables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) { - pwmp->timer->INTENSET = - 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + pwmp->channels); -} - -/** - * @brief Disables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) { - pwmp->timer->INTENCLR = - 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + pwmp->channels); -} - -/** - * @brief Enables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) { - pwmp->timer->INTENSET = - 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + channel); -} - -/** - * @brief Disables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) { - pwmp->timer->INTENCLR = - 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + channel); -} - -#endif /* HAL_USE_PWM */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h deleted file mode 100644 index e2982d8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h +++ /dev/null @@ -1,333 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2016 Stéphane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_pwm_lld.h - * @brief NRF51 PWM subsystem low level driver header. - * - * @addtogroup PWM - * @{ - */ - -#ifndef HAL_PWM_LLD_H_ -#define HAL_PWM_LLD_H_ - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Number of PWM channels per PWM driver. - */ -#define PWM_CHANNELS 3 - - -#define PWM_FREQUENCY_16MHZ 16000000 /** @brief 16MHz */ -#define PWM_FREQUENCY_8MHZ 8000000 /** @brief 8MHz */ -#define PWM_FREQUENCY_4MHZ 4000000 /** @brief 4MHz */ -#define PWM_FREQUENCY_2MHZ 2000000 /** @brief 2MHz */ -#define PWM_FREQUENCY_1MHZ 1000000 /** @brief 1MHz */ -#define PWM_FREQUENCY_500KHZ 500000 /** @brief 500kHz */ -#define PWM_FREQUENCY_250KHZ 250000 /** @brief 250kHz */ -#define PWM_FREQUENCY_125KHZ 125000 /** @brief 125kHz */ -#define PWM_FREQUENCY_62500HZ 62500 /** @brief 62500Hz */ -#define PWM_FREQUENCY_31250HZ 31250 /** @brief 31250Hz */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief TIMER0 as driver implementation - */ -#if !defined(NRF51_PWM_USE_TIMER0) -#define NRF51_PWM_USE_TIMER0 FALSE -#endif - -/** - * @brief TIMER1 as driver implementation - */ -#if !defined(NRF51_PWM_USE_TIMER1) -#define NRF51_PWM_USE_TIMER1 FALSE -#endif - -/** - * @brief TIMER2 as driver implementation - */ -#if !defined(NRF51_PWM_USE_TIMER2) -#define NRF51_PWM_USE_TIMER2 FALSE -#endif - -/** - * @brief TIMER0 interrupt priority level setting. - */ -#if !defined(NRF51_PWM_TIMER0_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_PWM_TIMER0_PRIORITY 3 -#endif - -/** - * @brief TIMER1 interrupt priority level setting. - */ -#if !defined(NRF51_PWM_TIMER1_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_PWM_TIMER1_PRIORITY 3 -#endif - -/** - * @brief TIMER2 interrupt priority level setting. - */ -#if !defined(NRF51_PWM_TIMER2_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_PWM_TIMER2_PRIORITY 3 -#endif - -/** - * @brief Allow driver to use GPIOTE/PPI to control PAL line - */ -#if !defined(NRF51_PWM_USE_GPIOTE_PPI) -#define NRF51_PWM_USE_GPIOTE_PPI FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/* Configuration checks. */ -/*===========================================================================*/ - -#if !NRF51_PWM_USE_TIMER0 && !NRF51_PWM_USE_TIMER1 && !NRF51_PWM_USE_TIMER2 -#error "PWM driver activated but no TIMER peripheral assigned" -#endif - -#if (NRF51_ST_USE_TIMER0 == TRUE) && (NRF51_PWM_USE_TIMER0 == TRUE) -#error "TIMER0 used for ST and PWM" -#endif - -#if NRF51_PWM_USE_TIMER0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER0_PRIORITY) -#error "Invalid IRQ priority assigned to TIMER0" -#endif - -#if NRF51_PWM_USE_TIMER1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER1_PRIORITY) -#error "Invalid IRQ priority assigned to TIMER1" -#endif - -#if NRF51_PWM_USE_TIMER2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER2_PRIORITY) -#error "Invalid IRQ priority assigned to TIMER2" -#endif - - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a PWM mode. - */ -typedef uint32_t pwmmode_t; - -/** - * @brief Type of a PWM channel. - */ -typedef uint8_t pwmchannel_t; - -/** - * @brief Type of a channels mask. - */ -typedef uint32_t pwmchnmsk_t; - -/** - * @brief Type of a PWM counter. - */ -typedef uint16_t pwmcnt_t; - -/** - * @brief Type of a PWM driver channel configuration structure. - */ -typedef struct { - /** - * @brief Channel active logic level. - */ - pwmmode_t mode; - - /** - * @brief Channel callback pointer. - * @note This callback is invoked on the channel compare event. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /* End of the mandatory fields.*/ - - /** - * @brief PAL line to toggle. - * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW. - * @note When NRF51_PWM_USE_GPIOTE_PPI is used and channel enabled, - * it wont be possible to access this PAL line using the PAL - * driver. - */ - ioline_t ioline; - -#if NRF51_PWM_USE_GPIOTE_PPI || defined(__DOXYGEN__) - /** - * @brief Unique GPIOTE channel to use. (1 channel) - * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW. - * @note Only 4 GPIOTE channels are available on nRF51. - */ - uint8_t gpiote_channel; - - /** - * @brief Unique PPI channels to use. (2 channels) - * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW. - * @note Only 16 PPI channels are available on nRF51 - * (When Softdevice is enabled, only channels 0-7 are available) - */ - uint8_t ppi_channel[2]; -#endif -} PWMChannelConfig; - -/** - * @brief Type of a PWM driver configuration structure. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - uint32_t frequency; - /** - * @brief PWM period in ticks. - * @note The low level can use assertions in order to catch invalid - * period specifications. - */ - pwmcnt_t period; - /** - * @brief Periodic callback pointer. - * @note This callback is invoked on PWM counter reset. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /** - * @brief Channels configurations. - */ - PWMChannelConfig channels[PWM_CHANNELS]; - /* End of the mandatory fields.*/ -} PWMConfig; - -/** - * @brief Structure representing a PWM driver. - */ -struct PWMDriver { - /** - * @brief Driver state. - */ - pwmstate_t state; - /** - * @brief Current driver configuration data. - */ - const PWMConfig *config; - /** - * @brief Current PWM period in ticks. - */ - pwmcnt_t period; - /** - * @brief Mask of the enabled channels. - */ - pwmchnmsk_t enabled; - /** - * @brief Number of channels in this instance. - */ - pwmchannel_t channels; -#if defined(PWM_DRIVER_EXT_FIELDS) - PWM_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the TIMER registers block. - */ - NRF_TIMER_Type *timer; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the period the PWM peripheral. - * @details This function changes the period of a PWM unit that has already - * been activated using @p pwmStart(). - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The PWM unit period is changed to the new value. - * @note The function has effect at the next cycle start. - * @note If a period is specified that is shorter than the pulse width - * programmed in one of the channels then the behavior is not - * guaranteed. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] period new cycle time in ticks - * - * @notapi - */ -#define pwm_lld_change_period(pwmp, period) \ - do { \ - (pwmp)->timer->CC[(pwmp)->channels] = ((period) - 1); \ - } while(0) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if NRF51_PWM_USE_TIMER0 || defined(__DOXYGEN__) -extern PWMDriver PWMD1; -#endif -#if NRF51_PWM_USE_TIMER1 || defined(__DOXYGEN__) -extern PWMDriver PWMD2; -#endif -#if NRF51_PWM_USE_TIMER2 || defined(__DOXYGEN__) -extern PWMDriver PWMD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void pwm_lld_init(void); - void pwm_lld_start(PWMDriver *pwmp); - void pwm_lld_stop(PWMDriver *pwmp); - void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width); - void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel); - void pwm_lld_enable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_disable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); - void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PWM */ - -#endif /* HAL_PWM_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c deleted file mode 100644 index 5e501ed..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - RNG for ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/RNGv1/rng_lld.c - * @brief NRF51 RNG subsystem low level driver source. - * - * @addtogroup RNG - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_RNG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * @brief RNG default configuration. - */ -static const RNGConfig default_config = { - .digital_error_correction = 1, -}; - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief RNG1 driver identifier.*/ -#if NRF51_RNG_USE_RNG1 || defined(__DOXYGEN__) -RNGDriver RNGD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level RNG driver initialization. - * - * @notapi - */ -void rng_lld_init(void) { - rngObjectInit(&RNGD1); - RNGD1.rng = NRF_RNG; -} - -/** - * @brief Configures and activates the RNG peripheral. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @notapi - */ -void rng_lld_start(RNGDriver *rngp) { - if (rngp->config == NULL) - rngp->config = &default_config; - - rngp->rng->POWER = 1; - - if (rngp->config->digital_error_correction) - rngp->rng->CONFIG |= RNG_CONFIG_DERCEN_Msk; - else - rngp->rng->CONFIG &= ~RNG_CONFIG_DERCEN_Msk; - - rngp->rng->EVENTS_VALRDY = 0; - rngp->rng->INTENSET = RNG_INTENSET_VALRDY_Msk; - rngp->rng->TASKS_START = 1; -} - - -/** - * @brief Deactivates the RNG peripheral. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @notapi - */ -void rng_lld_stop(RNGDriver *rngp) { - rngp->rng->TASKS_STOP = 1; - rngp->rng->POWER = 0; -} - - -/** - * @brief Write random bytes; - * - * @param[in] rngp pointer to the @p RNGDriver object - * @param[in] n size of buf in bytes - * @param[in] buf @p buffer location - * - * @notapi - */ -msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, - systime_t timeout) { - size_t i; - - for (i = 0 ; i < n ; i++) { - /* Wait for byte ready - * It take about 677µs to generate a new byte, not sure if - * forcing a context switch will be a benefit - */ - while (NRF_RNG->EVENTS_VALRDY == 0) { - /* Sleep and wakeup on ARM event (interrupt) */ - SCB->SCR |= SCB_SCR_SEVONPEND_Msk; - __SEV(); - __WFE(); - __WFE(); - } - - /* Read byte */ - buf[i] = (char)NRF_RNG->VALUE; - - /* Mark as read */ - NRF_RNG->EVENTS_VALRDY = 0; - - /* Clear interrupt so we can wake up again */ - nvicClearPending(RNG_IRQn); - } - return MSG_OK; -} - -#endif /* HAL_USE_RNG */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h deleted file mode 100644 index 0ad0bc6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - RNG for ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/NRF51822/rng_lld.h - * @brief NRF51 RNG subsystem low level driver header. - * - * @addtogroup RNG - * @{ - */ - -#ifndef HAL_RNG_LLD_H -#define HAL_RNG_LLD_H - -#if (HAL_USE_RNG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief RNG1 driver enable switch. - * @details If set to @p TRUE the support for RNG1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_RNG_USE_RNG1) || defined(__DOXYGEN__) -#define NRF51_RNG_USE_RNG1 FALSE -#endif - -/** - * @brief RNG1 driver enable switch. - * @details If set to @p TRUE the support for RNG1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_RNG_USE_RNG1) || defined(__DOXYGEN__) -#define NRF51_RNG_USE_POWER_ON_WRITE FALSE -#endif - -/** - * @brief RNG1 interrupt priority level setting. - */ -#if !defined(NRF51_RNG_RNG1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_RNG_RNG1_IRQ_PRIORITY 3 -#endif - - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if NRF51_RNG_USE_RNG1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_RNG_RNG1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to RNG1" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an RNG driver. - */ -typedef struct RNGDriver RNGDriver; - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /* End of the mandatory fields.*/ - /** - * @brief Activate the digital error correction - * - * @details A digital corrector algorithm is employed to remove any - * bias toward '1' or '0'. Disabling it offers a substantial - * speed advantage, but may result in a statistical distribution - * that is not perfectly uniform. - * - * @note On average, it take 167µs to get a byte without digitial - * error correction and 677µs with, but no garantee is made - * on the necessary time to generate one byte. - */ - uint8_t digital_error_correction:1; - /** - * @brief Only power the RNG device when requeting random bytes - * - * @details Device will not be powered when started/stopped - * but only when writint bytes. - */ - uint8_t power_on_write:1; -} RNGConfig; - - -/** - * @brief Structure representing an RNG driver. - */ -struct RNGDriver { - /** - * @brief Driver state. - */ - rngstate_t state; - /** - * @brief Current configuration data. - */ - const RNGConfig *config; -#if RNG_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif /* RNG_USE_MUTUAL_EXCLUSION */ - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the RNGx registers block. - */ - NRF_RNG_Type *rng; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if NRF51_RNG_USE_RNG1 && !defined(__DOXYGEN__) -extern RNGDriver RNGD1; -#endif /* NRF51_RNG_USE_RNG1 */ - -#ifdef __cplusplus -extern "C" { -#endif - void rng_lld_init(void); - void rng_lld_start(RNGDriver *rngp); - void rng_lld_stop(RNGDriver *rngp); - msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, - systime_t timeout); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_RNG */ - -#endif /* HAL_RNG_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c deleted file mode 100644 index 029c5da..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file serial_lld.c - * @brief NRF51822 serial subsystem low level driver source. - * - * @addtogroup SERIAL - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__) - -#include "nrf51.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief USART1 serial driver identifier.*/ -#if (NRF51_SERIAL_USE_UART0 == TRUE) || defined(__DOXYGEN__) -SerialDriver SD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Driver default configuration. - */ -static const SerialConfig default_config = { - .speed = 38400, - .tx_pad = NRF51_SERIAL_PAD_DISCONNECTED, - .rx_pad = NRF51_SERIAL_PAD_DISCONNECTED, -#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE) - .rts_pad = NRF51_SERIAL_PAD_DISCONNECTED, - .cts_pad = NRF51_SERIAL_PAD_DISCONNECTED, -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/* - * @brief Maps a baudrate speed to a BAUDRATE register value. - */ - -/** - * @brief Common UART configuration. - * - */ -static void configure_uart(const SerialConfig *config) -{ - uint32_t speed = UART_BAUDRATE_BAUDRATE_Baud250000; - - switch (config->speed) { - case 1200: speed = UART_BAUDRATE_BAUDRATE_Baud1200; break; - case 2400: speed = UART_BAUDRATE_BAUDRATE_Baud2400; break; - case 4800: speed = UART_BAUDRATE_BAUDRATE_Baud4800; break; - case 9600: speed = UART_BAUDRATE_BAUDRATE_Baud9600; break; - case 14400: speed = UART_BAUDRATE_BAUDRATE_Baud14400; break; - case 19200: speed = UART_BAUDRATE_BAUDRATE_Baud19200; break; - case 28800: speed = UART_BAUDRATE_BAUDRATE_Baud28800; break; - case 38400: speed = UART_BAUDRATE_BAUDRATE_Baud38400; break; - case 57600: speed = UART_BAUDRATE_BAUDRATE_Baud57600; break; - case 76800: speed = UART_BAUDRATE_BAUDRATE_Baud76800; break; - case 115200: speed = UART_BAUDRATE_BAUDRATE_Baud115200; break; - case 230400: speed = UART_BAUDRATE_BAUDRATE_Baud230400; break; - case 250000: speed = UART_BAUDRATE_BAUDRATE_Baud250000; break; - case 460800: speed = UART_BAUDRATE_BAUDRATE_Baud460800; break; - case 921600: speed = UART_BAUDRATE_BAUDRATE_Baud921600; break; - case 1000000: speed = UART_BAUDRATE_BAUDRATE_Baud1M; break; - default: osalDbgAssert(0, "invalid baudrate"); break; - }; - - /* Configure PINs mode */ - if (config->tx_pad != NRF51_SERIAL_PAD_DISCONNECTED) { - palSetPadMode(IOPORT1, config->tx_pad, PAL_MODE_OUTPUT_PUSHPULL); - } - if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) { - palSetPadMode(IOPORT1, config->rx_pad, PAL_MODE_INPUT); - } -#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE) - if (config->rts_pad != NRF51_SERIAL_PAD_DISCONNECTED) { - palSetPadMode(IOPORT1, config->rts_pad, PAL_MODE_OUTPUT_PUSHPULL); - } - if (config->cts_pad != NRF51_SERIAL_PAD_DISCONNECTED) { - palSetPadMode(IOPORT1, config->cts_pad, PAL_MODE_INPUT); - } -#endif - - /* Select PINs used by UART */ - NRF_UART0->PSELTXD = config->tx_pad; - NRF_UART0->PSELRXD = config->rx_pad; -#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE) - NRF_UART0->PSELRTS = config->rts_pad; - NRF_UART0->PSELCTS = config->cts_pad; -#else - NRF_UART0->PSELRTS = NRF51_SERIAL_PAD_DISCONNECTED; - NRF_UART0->PSELCTS = NRF51_SERIAL_PAD_DISCONNECTED; -#endif - - /* Set baud rate */ - NRF_UART0->BAUDRATE = speed; - - /* Set config */ - NRF_UART0->CONFIG = (UART_CONFIG_PARITY_Excluded << UART_CONFIG_PARITY_Pos); - - /* Adjust flow control */ -#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE) - if ((config->rts_pad < TOTAL_GPIO_PADS) || - (config->cts_pad < TOTAL_GPIO_PADS)) { - NRF_UART0->CONFIG |= UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos; - } else { - NRF_UART0->CONFIG &= ~(UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos); - } -#else - NRF_UART0->CONFIG &= ~(UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos); -#endif - - /* Enable UART and clear events */ - NRF_UART0->ENABLE = UART_ENABLE_ENABLE_Enabled; - NRF_UART0->EVENTS_RXDRDY = 0; - NRF_UART0->EVENTS_TXDRDY = 0; - - - if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) { - while (NRF_UART0->EVENTS_RXDRDY != 0) { - (void)NRF_UART0->RXD; - } - } -} - - -/** - * @brief Driver output notification. - */ -#if NRF51_SERIAL_USE_UART0 || defined(__DOXYGEN__) -static void notify1(io_queue_t *qp) -{ - SerialDriver *sdp = &SD1; - - (void)qp; - - if (NRF_UART0->PSELTXD == NRF51_SERIAL_PAD_DISCONNECTED) - return; - - if (!sdp->tx_busy) { - msg_t b = oqGetI(&sdp->oqueue); - - if (b < Q_OK) { - chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); - NRF_UART0->TASKS_STOPTX = 1; - return; - } - sdp->tx_busy = 1; - NRF_UART0->TASKS_STARTTX = 1; - NRF_UART0->TXD = b; - } -} -#endif - - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if NRF51_SERIAL_USE_UART0 || defined(__DOXYGEN__) -OSAL_IRQ_HANDLER(Vector48) { - - OSAL_IRQ_PROLOGUE(); - - SerialDriver *sdp = &SD1; - uint32_t isr = NRF_UART0->INTENSET; - - if ((NRF_UART0->EVENTS_RXDRDY != 0) && (isr & UART_INTENSET_RXDRDY_Msk)) { - // Clear UART RX event flag - NRF_UART0->EVENTS_RXDRDY = 0; - - osalSysLockFromISR(); - if (iqIsEmptyI(&sdp->iqueue)) - chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE); - if (iqPutI(&sdp->iqueue, NRF_UART0->RXD) < Q_OK) - chnAddFlagsI(sdp, SD_OVERRUN_ERROR); - osalSysUnlockFromISR(); - } - - if ((NRF_UART0->EVENTS_TXDRDY != 0) && (isr & UART_INTENSET_TXDRDY_Msk)) { - msg_t b; - - // Clear UART TX event flag. - NRF_UART0->EVENTS_TXDRDY = 0; - - osalSysLockFromISR(); - b = oqGetI(&sdp->oqueue); - osalSysUnlockFromISR(); - - if (b < Q_OK) { - osalSysLockFromISR(); - chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); - osalSysUnlockFromISR(); - NRF_UART0->TASKS_STOPTX = 1; - sdp->tx_busy = 0; - } else { - sdp->tx_busy = 1; - NRF_UART0->TXD = b; - } - } - - /* TODO: Error handling for EVENTS_ERROR */ - if ((NRF_UART0->EVENTS_ERROR != 0) && (isr & UART_INTENSET_ERROR_Msk)) { - // Clear UART ERROR event flag. - NRF_UART0->EVENTS_ERROR = 0; - } - - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level serial driver initialization. - * - * @notapi - */ -void sd_lld_init(void) { - -#if NRF51_SERIAL_USE_UART0 == TRUE - sdObjectInit(&SD1, NULL, notify1); -#endif -} - -/** - * @brief Low level serial driver configuration and (re)start. - * - * @param[in] sdp pointer to a @p SerialDriver object - * @param[in] config the architecture-dependent serial driver configuration. - * If this parameter is set to @p NULL then a default - * configuration is used. - * - * @notapi - */ -void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) { - - if (config == NULL) - config = &default_config; - - osalDbgAssert( - (config->rx_pad < TOTAL_GPIO_PADS) || (config->tx_pad < TOTAL_GPIO_PADS), - "must configure at least an RX or TX pad"); - - if (sdp->state == SD_STOP) { - -#if NRF51_SERIAL_USE_UART0 == TRUE - if (sdp == &SD1) { - configure_uart(config); - - // Enable UART interrupt - NRF_UART0->INTENCLR = (uint32_t)-1; - NRF_UART0->INTENSET = UART_INTENSET_ERROR_Msk; - if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) - NRF_UART0->INTENSET |= UART_INTENSET_RXDRDY_Msk; - if (config->tx_pad != NRF51_SERIAL_PAD_DISCONNECTED) - NRF_UART0->INTENSET |= UART_INTENSET_TXDRDY_Msk; - - nvicEnableVector(UART0_IRQn, NRF51_SERIAL_UART0_PRIORITY); - - if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) - NRF_UART0->TASKS_STARTRX = 1; - } -#endif - - } -} - -/** - * @brief Low level serial driver stop. - * @details De-initializes the USART, stops the associated clock, resets the - * interrupt vector. - * - * @param[in] sdp pointer to a @p SerialDriver object - * - * @notapi - */ -void sd_lld_stop(SerialDriver *sdp) { - - if (sdp->state == SD_READY) { - -#if NRF51_SERIAL_USE_UART0 == TRUE - if (&SD1 == sdp) { - nvicDisableVector(UART0_IRQn); - NRF_UART0->ENABLE = UART_ENABLE_ENABLE_Disabled; - } -#endif - } -} - -#endif /* HAL_USE_SERIAL == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h deleted file mode 100644 index 79955b1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file serial_lld.h - * @brief NRF51822 serial subsystem low level driver header. - * - * @addtogroup SERIAL - * @{ - */ - -#ifndef HAL_SERIAL_LLD_H -#define HAL_SERIAL_LLD_H - -#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name PLATFORM configuration options - * @{ - */ -/** - * @brief SD flow control enable switch. - * @details If set to @p TRUE the support for hardware flow control - * is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_SERIAL_USE_HWFLOWCTRL) || defined(__DOXYGEN__) -#define NRF51_SERIAL_USE_HWFLOWCTRL FALSE -#endif - -/** - * @brief SD1 driver enable switch. - * @details If set to @p TRUE the support for SD1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_SERIAL_USE_UART0) || defined(__DOXYGEN__) -#define NRF51_SERIAL_USE_UART0 FALSE -#endif - -/** - * @brief UART0 interrupt priority level setting. - */ -#if !defined(NRF51_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_SERIAL_UART0_PRIORITY 3 -#endif - -/* Value indicating that no pad is connected to this UART register. */ -#define NRF51_SERIAL_PAD_DISCONNECTED 0xFFFFFFFFU -#define NRF51_SERIAL_INVALID_BAUDRATE 0xFFFFFFFFU - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if NRF51_SERIAL_USE_UART0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SERIAL_UART0_PRIORITY) -#error "Invalid IRQ priority assigned to UART0" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief NRF51 Serial Driver configuration structure. - * @details An instance of this structure must be passed to @p sdStart() - * in order to configure and start a serial driver operations. - * @note This structure content is architecture dependent, each driver - * implementation defines its own version and the custom static - * initializers. - */ -typedef struct { - /** - * @brief Bit rate. - */ - uint32_t speed; - /* End of the mandatory fields.*/ - uint32_t tx_pad; - uint32_t rx_pad; -#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE) - uint32_t rts_pad; - uint32_t cts_pad; -#endif -} SerialConfig; - -/** - * @brief @p SerialDriver specific data. - */ -#define _serial_driver_data \ - _base_asynchronous_channel_data \ - /* Driver state.*/ \ - sdstate_t state; \ - /* Input queue.*/ \ - input_queue_t iqueue; \ - /* Output queue.*/ \ - output_queue_t oqueue; \ - /* Input circular buffer.*/ \ - uint8_t ib[SERIAL_BUFFERS_SIZE]; \ - /* Output circular buffer.*/ \ - uint8_t ob[SERIAL_BUFFERS_SIZE]; \ - /* 1 if port is busy transmitting, 0 otherwise. */ \ - uint8_t tx_busy; \ - /* End of the mandatory fields.*/ \ - thread_t *thread; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if (NRF51_SERIAL_USE_UART0 == TRUE) && !defined(__DOXYGEN__) -extern SerialDriver SD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void sd_lld_init(void); - void sd_lld_start(SerialDriver *sdp, const SerialConfig *config); - void sd_lld_stop(SerialDriver *sdp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SERIAL == TRUE */ - -#endif /* HAL_SERIAL_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c deleted file mode 100644 index 7a70c13..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c +++ /dev/null @@ -1,374 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/spi_lld.c - * @brief NRF51822 low level SPI driver code. - * - * @addtogroup SPI - * @{ - */ - -#include "hal.h" - -#if HAL_USE_SPI || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -#if NRF51_SPI_USE_SPI0 || defined(__DOXYGEN__) -/** @brief SPI1 driver identifier.*/ -SPIDriver SPID1; -#endif - -#if NRF51_SPI_USE_SPI1 || defined(__DOXYGEN__) -/** @brief SPI2 driver identifier.*/ -SPIDriver SPID2; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Preloads the transmit FIFO. - * - * @param[in] spip pointer to the @p SPIDriver object - */ -static void port_fifo_preload(SPIDriver *spip) { - NRF_SPI_Type *port = spip->port; - - if (spip->txcnt > 0 && spip->txptr != NULL) - port->TXD = *(uint8_t *)spip->txptr++; - else - port->TXD = 0xFF; - spip->txcnt--; -} - -#if defined(__GNUC__) -__attribute__((noinline)) -#endif -/** - * @brief Common IRQ handler. - * - * @param[in] spip pointer to the @p SPIDriver object - */ -static void serve_interrupt(SPIDriver *spip) { - NRF_SPI_Type *port = spip->port; - - // Clear SPI READY event flag - port->EVENTS_READY = 0; - - if (spip->rxptr != NULL) { - *(uint8_t *)spip->rxptr++ = port->RXD; - } - else { - (void)port->RXD; - if (--spip->rxcnt == 0) { - osalDbgAssert(spip->txcnt == 0, "counter out of synch"); - /* Stops the IRQ sources.*/ - spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos); - /* Portable SPI ISR code defined in the high level driver, note, it is - a macro.*/ - _spi_isr_code(spip); - return; - } - } - if (spip->txcnt > 0) { - port_fifo_preload(spip); - } - else { - spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos); - /* Portable SPI ISR code defined in the high level driver, note, it is - a macro.*/ - _spi_isr_code(spip); - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if NRF51_SPI_USE_SPI0 || defined(__DOXYGEN__) -/** - * @brief SPI0 interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(Vector4C) { - - CH_IRQ_PROLOGUE(); - serve_interrupt(&SPID1); - CH_IRQ_EPILOGUE(); -} -#endif -#if NRF51_SPI_USE_SPI1 || defined(__DOXYGEN__) -/** - * @brief SPI1 interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(Vector50) { - - CH_IRQ_PROLOGUE(); - serve_interrupt(&SPID2); - CH_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level SPI driver initialization. - * - * @notapi - */ -void spi_lld_init(void) { - -#if NRF51_SPI_USE_SPI0 - spiObjectInit(&SPID1); - SPID1.port = NRF_SPI0; -#endif -#if NRF51_SPI_USE_SPI1 - spiObjectInit(&SPID2); - SPID2.port = NRF_SPI1; -#endif -} - -/** - * @brief Configures and activates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_start(SPIDriver *spip) { - uint32_t config; - - if (spip->state == SPI_STOP) { -#if NRF51_SPI_USE_SPI0 - if (&SPID1 == spip) - nvicEnableVector(SPI0_TWI0_IRQn, NRF51_SPI_SPI0_IRQ_PRIORITY); -#endif -#if NRF51_SPI_USE_SPI1 - if (&SPID2 == spip) - nvicEnableVector(SPI1_TWI1_IRQn, NRF51_SPI_SPI1_IRQ_PRIORITY); -#endif - } - - config = spip->config->lsbfirst ? - (SPI_CONFIG_ORDER_LsbFirst << SPI_CONFIG_ORDER_Pos) : - (SPI_CONFIG_ORDER_MsbFirst << SPI_CONFIG_ORDER_Pos); - - switch (spip->config->mode) { - case 1: - config |= (SPI_CONFIG_CPOL_ActiveLow << SPI_CONFIG_CPOL_Pos); - config |= (SPI_CONFIG_CPHA_Trailing << SPI_CONFIG_CPHA_Pos); - break; - case 2: - config |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos); - config |= (SPI_CONFIG_CPHA_Leading << SPI_CONFIG_CPHA_Pos); - break; - case 3: - config |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos); - config |= (SPI_CONFIG_CPHA_Trailing << SPI_CONFIG_CPHA_Pos); - break; - default: - config |= (SPI_CONFIG_CPOL_ActiveLow << SPI_CONFIG_CPOL_Pos); - config |= (SPI_CONFIG_CPHA_Leading << SPI_CONFIG_CPHA_Pos); - break; - } - - /* Configuration.*/ - spip->port->CONFIG = config; - spip->port->PSELSCK = spip->config->sckpad; - spip->port->PSELMOSI = spip->config->mosipad; - spip->port->PSELMISO = spip->config->misopad; - spip->port->FREQUENCY = spip->config->freq; - spip->port->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos); - - /* clear events flag */ - spip->port->EVENTS_READY = 0; -} - -/** - * @brief Deactivates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_stop(SPIDriver *spip) { - - if (spip->state != SPI_STOP) { - spip->port->ENABLE = (SPI_ENABLE_ENABLE_Disabled << SPI_ENABLE_ENABLE_Pos); - spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos); -#if NRF51_SPI_USE_SPI0 - if (&SPID1 == spip) - nvicDisableVector(SPI0_TWI0_IRQn); -#endif -#if NRF51_SPI_USE_SPI1 - if (&SPID2 == spip) - nvicDisableVector(SPI1_TWI1_IRQn); -#endif - } -} - -/** - * @brief Asserts the slave select signal and prepares for transfers. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_select(SPIDriver *spip) { - - palClearPad(IOPORT1, spip->config->sspad); -} - -/** - * @brief Deasserts the slave select signal. - * @details The previously selected peripheral is unselected. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_unselect(SPIDriver *spip) { - - palSetPad(IOPORT1, spip->config->sspad); -} - -/** - * @brief Ignores data on the SPI bus. - * @details This function transmits a series of idle words on the SPI bus and - * ignores the received data. This function can be invoked even - * when a slave select signal has not been yet asserted. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be ignored - * - * @notapi - */ -void spi_lld_ignore(SPIDriver *spip, size_t n) { - - spip->rxptr = NULL; - spip->txptr = NULL; - spip->rxcnt = spip->txcnt = n; - port_fifo_preload(spip); - spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos); -} - -/** - * @brief Exchanges data on the SPI bus. - * @details This asynchronous function starts a simultaneous transmit/receive - * operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be exchanged - * @param[in] txbuf the pointer to the transmit buffer - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_exchange(SPIDriver *spip, size_t n, - const void *txbuf, void *rxbuf) { - - spip->rxptr = rxbuf; - spip->txptr = txbuf; - spip->rxcnt = spip->txcnt = n; - port_fifo_preload(spip); - spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos); -} - -/** - * @brief Sends data over the SPI bus. - * @details This asynchronous function starts a transmit operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to send - * @param[in] txbuf the pointer to the transmit buffer - * - * @notapi - */ -void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) { - - spip->rxptr = NULL; - spip->txptr = txbuf; - spip->rxcnt = spip->txcnt = n; - port_fifo_preload(spip); - spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos); -} - -/** - * @brief Receives data from the SPI bus. - * @details This asynchronous function starts a receive operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to receive - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) { - - spip->rxptr = rxbuf; - spip->txptr = NULL; - spip->rxcnt = spip->txcnt = n; - port_fifo_preload(spip); - spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos); -} - -/** - * @brief Exchanges one frame using a polled wait. - * @details This synchronous function exchanges one frame using a polled - * synchronization method. This function is useful when exchanging - * small amount of data on high speed channels, usually in this - * situation is much more efficient just wait for completion using - * polling than suspending the thread waiting for an interrupt. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] frame the data frame to send over the SPI bus - * @return The received data frame from the SPI bus. - */ -uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) { - - spip->port->TXD = (uint8_t)frame; - while (spip->port->EVENTS_READY == 0) - ; - spip->port->EVENTS_READY = 0; - return spip->port->RXD; -} - -#endif /* HAL_USE_SPI */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h deleted file mode 100644 index 4d1c452..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/spi_lld.h - * @brief NRF51822 low level SPI driver header. - * - * @addtogroup SPI - * @{ - */ - -#ifndef HAL_SPI_LLD_H -#define HAL_SPI_LLD_H - -#if HAL_USE_SPI || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief SPI0 interrupt priority level setting. - */ -#if !defined(NRF51_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_SPI_SPI0_IRQ_PRIORITY 3 -#endif - -/** - * @brief SPI1 interrupt priority level setting. - */ -#if !defined(NRF51_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_SPI_SPI1_IRQ_PRIORITY 3 -#endif - -/** - * @brief Overflow error hook. - * @details The default action is to stop the system. - */ -#if !defined(NRF51_SPI_SPI_ERROR_HOOK) || defined(__DOXYGEN__) -#define NRF51_SPI_SPI_ERROR_HOOK() chSysHalt() -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !NRF51_SPI_USE_SPI0 && !NRF51_SPI_USE_SPI1 -#error "SPI driver activated but no SPI peripheral assigned" -#endif - -#if NRF51_SPI_USE_SPI0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SPI_SPI0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SPI0" -#endif - -#if NRF51_SPI_USE_SPI1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SPI_SPI1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SPI1" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an SPI driver. - */ -typedef struct SPIDriver SPIDriver; - -/** - * @brief SPI notification callback type. - * - * @param[in] spip pointer to the @p SPIDriver object triggering the - * callback - */ -typedef void (*spicallback_t)(SPIDriver *spip); - -/** - * @brief SPI frequency - */ -typedef enum { - NRF51_SPI_FREQ_125KBPS = (SPI_FREQUENCY_FREQUENCY_K125 << SPI_FREQUENCY_FREQUENCY_Pos), - NRF51_SPI_FREQ_250KBPS = (SPI_FREQUENCY_FREQUENCY_K250 << SPI_FREQUENCY_FREQUENCY_Pos), - NRF51_SPI_FREQ_500KBPS = (SPI_FREQUENCY_FREQUENCY_K500 << SPI_FREQUENCY_FREQUENCY_Pos), - NRF51_SPI_FREQ_1MBPS = (SPI_FREQUENCY_FREQUENCY_M1 << SPI_FREQUENCY_FREQUENCY_Pos), - NRF51_SPI_FREQ_2MBPS = (SPI_FREQUENCY_FREQUENCY_M2 << SPI_FREQUENCY_FREQUENCY_Pos), - NRF51_SPI_FREQ_4MBPS = (SPI_FREQUENCY_FREQUENCY_M4 << SPI_FREQUENCY_FREQUENCY_Pos), - NRF51_SPI_FREQ_8MBPS = (SPI_FREQUENCY_FREQUENCY_M8 << SPI_FREQUENCY_FREQUENCY_Pos), -} spifreq_t; - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /** - * @brief Operation complete callback or @p NULL. - */ - spicallback_t end_cb; - /** - * @brief The frequency of the SPI peripheral - */ - spifreq_t freq; - /** - * @brief The SCK pad - */ - uint16_t sckpad; - /** - * @brief The MOSI pad - */ - uint16_t mosipad; - /** - * @brief The MOSI pad - */ - uint16_t misopad; - /* End of the mandatory fields.*/ - /** - * @brief The chip select line pad number. - */ - uint16_t sspad; - /** - * @brief Shift out least significant bit first - */ - uint8_t lsbfirst; - /** - * @brief SPI mode - */ - uint8_t mode; -} SPIConfig; - -/** - * @brief Structure representing a SPI driver. - */ -struct SPIDriver { - /** - * @brief Driver state. - */ - spistate_t state; - /** - * @brief Current configuration data. - */ - const SPIConfig *config; -#if SPI_USE_WAIT || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif /* SPI_USE_WAIT */ -#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) -#if CH_CFG_USE_MUTEXES || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#elif CH_CFG_USE_SEMAPHORES - semaphore_t semaphore; -#endif -#endif /* SPI_USE_MUTUAL_EXCLUSION */ -#if defined(SPI_DRIVER_EXT_FIELDS) - SPI_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the SPI port. - */ - NRF_SPI_Type *port; - /** - * @brief Number of bytes yet to be received. - */ - uint32_t rxcnt; - /** - * @brief Receive pointer or @p NULL. - */ - void *rxptr; - /** - * @brief Number of bytes yet to be transmitted. - */ - uint32_t txcnt; - /** - * @brief Transmit pointer or @p NULL. - */ - const void *txptr; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if NRF51_SPI_USE_SPI0 && !defined(__DOXYGEN__) -extern SPIDriver SPID1; -#endif -#if NRF51_SPI_USE_SPI1 && !defined(__DOXYGEN__) -extern SPIDriver SPID2; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void spi_lld_init(void); - void spi_lld_start(SPIDriver *spip); - void spi_lld_stop(SPIDriver *spip); - void spi_lld_select(SPIDriver *spip); - void spi_lld_unselect(SPIDriver *spip); - void spi_lld_ignore(SPIDriver *spip, size_t n); - void spi_lld_exchange(SPIDriver *spip, size_t n, - const void *txbuf, void *rxbuf); - void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf); - void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf); - uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SPI */ - -#endif /* HAL_SPI_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c deleted file mode 100644 index 181bc06..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Fabio Utzig - 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file st_lld.c - * @brief NRF51822 ST subsystem low level driver source. - * - * @addtogroup ST - * @{ - */ - -#include "hal.h" - -#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__) -#if NRF51_ST_USE_RTC0 == TRUE -/** - * @brief System Timer vector (RTC0) - * @details This interrupt is used for system tick in periodic mode - * if selected with NRF51_ST_USE_RTC0 - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector6C) { - - OSAL_IRQ_PROLOGUE(); - - NRF_RTC0->EVENTS_TICK = 0; - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if NRF51_ST_USE_RTC1 == TRUE -/** - * @brief System Timer vector (RTC1) - * @details This interrupt is used for system tick in periodic mode - * if selected with NRF51_ST_USE_RTC1 - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector84) { - - OSAL_IRQ_PROLOGUE(); - - NRF_RTC1->EVENTS_TICK = 0; - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if NRF51_ST_USE_TIMER0 == TRUE -/** - * @brief System Timer vector. (TIMER0) - * @details This interrupt is used for system tick in periodic mode - * if selected with NRF51_ST_USE_TIMER0 - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector60) { - - OSAL_IRQ_PROLOGUE(); - - /* Clear timer compare event */ - if (NRF_TIMER0->EVENTS_COMPARE[0] != 0) - NRF_TIMER0->EVENTS_COMPARE[0] = 0; - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - - OSAL_IRQ_EPILOGUE(); -} -#endif -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__) -#if NRF51_ST_USE_RTC0 == TRUE -/** - * @brief System Timer vector (RTC0) - * @details This interrupt is used for freerunning mode (tick-less) - * if selected with NRF51_ST_USE_RTC0 - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector6C) { - - OSAL_IRQ_PROLOGUE(); - - if (NRF_RTC0->EVENTS_COMPARE[0]) { - NRF_RTC0->EVENTS_COMPARE[0] = 0; - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - } - -#if OSAL_ST_RESOLUTION == 16 - if (NRF_RTC0->EVENTS_COMPARE[1]) { - NRF_RTC0->EVENTS_COMPARE[1] = 0; - NRF_RTC0->TASKS_CLEAR = 1; - } -#endif - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if NRF51_ST_USE_RTC1 == TRUE -/** - * @brief System Timer vector (RTC1) - * @details This interrupt is used for freerunning mode (tick-less) - * if selected with NRF51_ST_USE_RTC1 - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector84) { - - OSAL_IRQ_PROLOGUE(); - - if (NRF_RTC1->EVENTS_COMPARE[0]) { - NRF_RTC1->EVENTS_COMPARE[0] = 0; - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - } - -#if OSAL_ST_RESOLUTION == 16 - if (NRF_RTC1->EVENTS_COMPARE[1]) { - NRF_RTC1->EVENTS_COMPARE[1] = 0; - NRF_RTC1->TASKS_CLEAR = 1; - } -#endif - - OSAL_IRQ_EPILOGUE(); -} -#endif -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level ST driver initialization. - * - * @notapi - */ -void st_lld_init(void) { -#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING - -#if NRF51_ST_USE_RTC0 == TRUE - /* Using RTC with prescaler */ - NRF_RTC0->TASKS_STOP = 1; - NRF_RTC0->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1; - NRF_RTC0->EVTENCLR = RTC_EVTENSET_COMPARE0_Msk; - NRF_RTC0->EVENTS_COMPARE[0] = 0; - NRF_RTC0->INTENSET = RTC_INTENSET_COMPARE0_Msk; -#if OSAL_ST_RESOLUTION == 16 - NRF_RTC0->CC[1] = 0x10000; /* 2^16 */ - NRF_RTC0->EVENTS_COMPARE[1] = 0; - NRF_RTC0->EVTENSET = RTC_EVTENSET_COMPARE0_Msk; - NRF_RTC0->INTENSET = RTC_INTENSET_COMPARE1_Msk; -#endif - NRF_RTC0->TASKS_CLEAR = 1; - - /* Start timer */ - nvicEnableVector(RTC0_IRQn, NRF51_ST_PRIORITY); - NRF_RTC0->TASKS_START = 1; -#endif /* NRF51_ST_USE_RTC0 == TRUE */ - -#if NRF51_ST_USE_RTC1 == TRUE - /* Using RTC with prescaler */ - NRF_RTC1->TASKS_STOP = 1; - NRF_RTC1->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1; - NRF_RTC1->EVTENCLR = RTC_EVTENSET_COMPARE0_Msk; - NRF_RTC1->EVENTS_COMPARE[0] = 0; - NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE0_Msk; -#if OSAL_ST_RESOLUTION == 16 - NRF_RTC1->CC[1] = 0x10000; /* 2^16 */ - NRF_RTC1->EVENTS_COMPARE[1] = 0; - NRF_RTC1->EVTENSET = RTC_EVTENSET_COMPARE0_Msk; - NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE1_Msk; -#endif - NRF_RTC1->TASKS_CLEAR = 1; - - /* Start timer */ - nvicEnableVector(RTC1_IRQn, NRF51_ST_PRIORITY); - NRF_RTC1->TASKS_START = 1; -#endif /* NRF51_ST_USE_RTC1 == TRUE */ - -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */ - -#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC - -#if NRF51_ST_USE_RTC0 == TRUE - /* Using RTC with prescaler */ - NRF_RTC0->TASKS_STOP = 1; - NRF_RTC0->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1; - NRF_RTC0->INTENSET = RTC_INTENSET_TICK_Msk; - - /* Start timer */ - nvicEnableVector(RTC0_IRQn, NRF51_ST_PRIORITY); - NRF_RTC0->TASKS_START = 1; -#endif /* NRF51_ST_USE_RTC0 == TRUE */ - -#if NRF51_ST_USE_RTC1 == TRUE - /* Using RTC with prescaler */ - NRF_RTC1->TASKS_STOP = 1; - NRF_RTC1->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1; - NRF_RTC1->INTENSET = RTC_INTENSET_TICK_Msk; - - /* Start timer */ - nvicEnableVector(RTC1_IRQn, NRF51_ST_PRIORITY); - NRF_RTC1->TASKS_START = 1; -#endif /* NRF51_ST_USE_RTC1 == TRUE */ - -#if NRF51_ST_USE_TIMER0 == TRUE - NRF_TIMER0->TASKS_CLEAR = 1; - - /* - * Using 32-bit mode with prescaler 16 configures this - * timer with a 1MHz clock. - */ - NRF_TIMER0->BITMODE = 3; - NRF_TIMER0->PRESCALER = 4; - - /* - * Configure timer 0 compare capture 0 to generate interrupt - * and clear timer value when event is generated. - */ - NRF_TIMER0->CC[0] = (1000000 / OSAL_ST_FREQUENCY) - 1; - NRF_TIMER0->SHORTS = 1; - NRF_TIMER0->INTENSET = 0x10000; - - /* Start timer */ - nvicEnableVector(TIMER0_IRQn, NRF51_ST_PRIORITY); - NRF_TIMER0->TASKS_START = 1; -#endif /* NRF51_ST_USE_TIMER0 == TRUE */ - -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ -} - -#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h deleted file mode 100644 index 8d12d2e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file st_lld.h - * @brief NRF51822 ST subsystem low level driver header. - * @details This header is designed to be include-able without having to - * include other files from the HAL. - * - * @addtogroup ST - * @{ - */ - -#ifndef HAL_ST_LLD_H -#define HAL_ST_LLD_H - -#include "halconf.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief Use RTC0 to generates system ticks - */ -#if !defined(NRF51_ST_USE_RTC0) || defined(__DOXYGEN__) -#if !defined(SOFTDEVICE_PRESENT) -#define NRF51_ST_USE_RTC0 TRUE -#else -#define NRF51_ST_USE_RTC0 FALSE -#endif -#endif - -/** - * @brief Use RTC1 to generates system ticks - */ -#if !defined(NRF51_ST_USE_RTC1) || defined(__DOXYGEN__) -#if !defined(SOFTDEVICE_PRESENT) -#define NRF51_ST_USE_RTC1 FALSE -#else -#define NRF51_ST_USE_RTC1 TRUE -#endif -#endif - -/** - * @brief Use TIMER0 to generates system ticks - */ -#if !defined(NRF51_ST_USE_TIMER0) || defined(__DOXYGEN__) -#define NRF51_ST_USE_TIMER0 FALSE -#endif - -/** - * @brief ST interrupt priority level setting. - */ -#if !defined(NRF51_ST_PRIORITY) || defined(__DOXYGEN__) -#if !defined(SOFTDEVICE_PRESENT) -#define NRF51_ST_PRIORITY 1 -#else -#define NRF51_ST_PRIORITY 1 -#endif -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if OSAL_ST_MODE != OSAL_ST_MODE_NONE -#if (NRF51_ST_USE_TIMER0 == TRUE) && (NRF51_GPT_USE_TIMER0 == TRUE) -#error "TIMER0 already used by GPT driver" -#endif - -#if (NRF51_ST_USE_RTC0 == FALSE) && \ - (NRF51_ST_USE_RTC1 == FALSE) && \ - (NRF51_ST_USE_TIMER0 == FALSE) -#error "One clock source is needed, enable one (RTC0, RTC1, or TIMER0)" -#endif - -#if ((NRF51_ST_USE_RTC0 == TRUE ? 1 : 0) + \ - (NRF51_ST_USE_RTC1 == TRUE ? 1 : 0) + \ - (NRF51_ST_USE_TIMER0 == TRUE ? 1 : 0)) > 1 -#error "Only one clock source can be used (RTC0, RTC1, or TIMER0)" -#endif - -#if defined(SOFTDEVICE_PRESENT) -#if NRF51_ST_USE_RTC0 == TRUE -#error "RTC0 cannot be used for system ticks when SOFTDEVICE present" -#endif - -#if NRF51_ST_USE_TIMER0 == TRUE -#error "TIMER0 cannot be used for system ticks when SOFTDEVICE present" -#endif - -#if NRF51_ST_PRIORITY != 1 -#error "ST priority must be 1 when SOFTDEVICE present" -#endif - -#endif /* defined(SOFTDEVICE_PRESENT) */ -#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */ - -#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING -#if defined(CH_CFG_ST_TIMEDELTA) && (CH_CFG_ST_TIMEDELTA < 5) -#error "CH_CFG_ST_TIMEDELTA is too low" -#endif -#if NRF51_ST_USE_TIMER0 == TRUE -#error "Freeruning (tick-less) mode not supported with TIMER, use RTC" -#endif -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */ - -#if !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_ST_PRIORITY) -#error "Invalid IRQ priority assigned to ST driver" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void st_lld_init(void); -#ifdef __cplusplus -} -#endif - -/*===========================================================================*/ -/* Driver inline functions. */ -/*===========================================================================*/ - -/** - * @brief Returns the time counter value. - * - * @return The counter value. - * - * @notapi - */ -static inline systime_t st_lld_get_counter(void) { -#if NRF51_ST_USE_RTC0 == TRUE - return (systime_t)NRF_RTC0->COUNTER; -#endif -#if NRF51_ST_USE_RTC1 == TRUE - return (systime_t)NRF_RTC1->COUNTER; -#endif -#if NRF51_ST_USE_TIMER0 == TRUE - return (systime_t)0; -#endif -} - -/** - * @brief Starts the alarm. - * @note Makes sure that no spurious alarms are triggered after - * this call. - * - * @param[in] abstime the time to be set for the first alarm - * - * @notapi - */ -static inline void st_lld_start_alarm(systime_t abstime) { -#if NRF51_ST_USE_RTC0 == TRUE - NRF_RTC0->CC[0] = abstime; - NRF_RTC0->EVENTS_COMPARE[0] = 0; - NRF_RTC0->EVTENSET = RTC_EVTENSET_COMPARE0_Msk; -#endif -#if NRF51_ST_USE_RTC1 == TRUE - NRF_RTC1->CC[0] = abstime; - NRF_RTC1->EVENTS_COMPARE[0] = 0; - NRF_RTC1->EVTENSET = RTC_EVTENSET_COMPARE0_Msk; -#endif -#if NRF51_ST_USE_TIMER0 == TRUE - (void)abstime; -#endif -} - -/** - * @brief Stops the alarm interrupt. - * - * @notapi - */ -static inline void st_lld_stop_alarm(void) { -#if NRF51_ST_USE_RTC0 == TRUE - NRF_RTC0->EVTENCLR = RTC_EVTENCLR_COMPARE0_Msk; - NRF_RTC0->EVENTS_COMPARE[0] = 0; -#endif -#if NRF51_ST_USE_RTC1 == TRUE - NRF_RTC1->EVTENCLR = RTC_EVTENCLR_COMPARE0_Msk; - NRF_RTC1->EVENTS_COMPARE[0] = 0; -#endif -} - -/** - * @brief Sets the alarm time. - * - * @param[in] abstime the time to be set for the next alarm - * - * @notapi - */ -static inline void st_lld_set_alarm(systime_t abstime) { -#if NRF51_ST_USE_RTC0 == TRUE - NRF_RTC0->CC[0] = abstime; -#endif -#if NRF51_ST_USE_RTC1 == TRUE - NRF_RTC1->CC[0] = abstime; -#endif -#if NRF51_ST_USE_TIMER0 == TRUE - (void)abstime; -#endif -} - -/** - * @brief Returns the current alarm time. - * - * @return The currently set alarm time. - * - * @notapi - */ -static inline systime_t st_lld_get_alarm(void) { -#if NRF51_ST_USE_RTC0 == TRUE - return (systime_t)NRF_RTC0->CC[0]; -#endif -#if NRF51_ST_USE_RTC1 == TRUE - return (systime_t)NRF_RTC1->CC[0]; -#endif -#if NRF51_ST_USE_TIMER0 == TRUE - return (systime_t)0; -#endif -} - -/** - * @brief Determines if the alarm is active. - * - * @return The alarm status. - * @retval false if the alarm is not active. - * @retval true is the alarm is active - * - * @notapi - */ -static inline bool st_lld_is_alarm_active(void) { -#if NRF51_ST_USE_RTC0 == TRUE - return NRF_RTC0->EVTEN & RTC_EVTEN_COMPARE0_Msk; -#endif -#if NRF51_ST_USE_RTC1 == TRUE - return NRF_RTC1->EVTEN & RTC_EVTEN_COMPARE0_Msk; -#endif -#if NRF51_ST_USE_TIMER0 == TRUE - return false; -#endif -} - -#endif /* HAL_ST_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c deleted file mode 100644 index 0ce37ee..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/wdg_lld.c - * @brief WDG Driver subsystem low level driver source template. - * - * @addtogroup WDG - * @{ - */ - -#include "hal.h" - -#if HAL_USE_WDG || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define RELOAD_REQUEST_VALUE 0x6E524635 - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -WDGDriver WDGD1; - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if WDG_USE_TIMEOUT_CALLBACK == TRUE -/** - * @brief Watchdog vector. - * @details This interrupt is used when watchdog timeout. - * - * @note Only 2 cycles at NRF51_LFCLK_FREQUENCY are available - * to they good bye. - * - * @isr - */ -OSAL_IRQ_HANDLER(Vector84) { - - OSAL_IRQ_PROLOGUE(); - osalSysLockFromISR(); - - /* Notify */ - if (WDGD1.config->callback) - WDGD1.config->callback(); - - /* Wait for reboot */ - while (1) { /* */ } - - osalSysUnlockFromISR(); - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level WDG driver initialization. - * - * @notapi - */ -void wdg_lld_init(void) { - WDGD1.state = WDG_STOP; - WDGD1.wdt = NRF_WDT; -} - -/** - * @brief Configures and activates the WDG peripheral. - * - * @note Once started there is no way out. - * - * @param[in] wdgp pointer to the @p WDGDriver object - * - * @notapi - */ -void wdg_lld_start(WDGDriver *wdgp) { -#if WDG_USE_TIMEOUT_CALLBACK == TRUE - wdgp->wdt->INTENSET = WDT_INTENSET_TIMEOUT_Msk; -#endif - - /* When to pause? (halt, sleep) */ - wdgp->wdt->CONFIG = - (wdgp->config->flags.pause_on_sleep * WDT_CONFIG_SLEEP_Msk) | - (wdgp->config->flags.pause_on_halt * WDT_CONFIG_HALT_Msk ); - - /* Timeout in milli-seconds */ - uint64_t tout = (NRF51_LFCLK_FREQUENCY * wdgp->config->timeout_ms / 1000) - 1; - osalDbgAssert(tout <= 0xFFFFFFFF, "watchdog timout value exceeded"); - wdgp->wdt->CRV = (uint32_t)tout; - - /* Reload request (using RR0) */ - wdgp->wdt->RREN = WDT_RREN_RR0_Msk; - - /* Say your prayers, little one. */ - wdgp->wdt->TASKS_START = 1; -} - -/** - * @brief Deactivates the WDG peripheral. - * - * @param[in] wdgp pointer to the @p WDGDriver object - * - * @api - */ -void wdg_lld_stop(WDGDriver *wdgp) { - (void)wdgp; - osalDbgAssert(false, "WDG cannot be stopped once activated"); -} - -/** - * @brief Reloads WDG's counter. - * - * @param[in] wdgp pointer to the @p WDGDriver object - * - * @notapi - */ -void wdg_lld_reset(WDGDriver * wdgp) { - wdgp->wdt->RR[0] = RELOAD_REQUEST_VALUE; -} - -#endif /* HAL_USE_WDG */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h deleted file mode 100644 index 8fea304..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/wdg_lld.h - * @brief WDG Driver subsystem low level driver header template. - * - * @addtogroup WDG - * @{ - */ - -#ifndef HAL_WDG_LLD_H -#define HAL_WDG_LLD_H - -#if (HAL_USE_WDG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define WDG_MAX_TIMEOUT_MS \ - ((uint32_t)(0xFFFFFFFFu * 1000 / NRF51_LFCLK_FREQUENCY)) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief WDG driver implement timeout callback. - * @note The default is @p FALSE. - */ -#if !defined(WDG_USE_TIMEOUT_CALLBACK) || defined(__DOXYGEN__) -#define WDG_USE_TIMEOUT_CALLBACK FALSE -#endif -/** @} */ - - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an WDG driver. - */ -typedef struct WDGDriver WDGDriver; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - struct { - uint8_t pause_on_sleep : 1; - uint8_t pause_on_halt : 1; - } flags; - uint32_t timeout_ms; -#if WDG_USE_TIMEOUT_CALLBACK == TRUE - void (*callback)(void); -#endif -} WDGConfig; - - - -/** - * @brief Structure representing an WDG driver. - */ -struct WDGDriver { - /** - * @brief Driver state. - */ - wdgstate_t state; - /** - * @brief Current configuration data. - */ - const WDGConfig *config; - /* End of the mandatory fields.*/ - NRF_WDT_Type *wdt; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern WDGDriver WDGD1; - -#ifdef __cplusplus -extern "C" { -#endif - void wdg_lld_init(void); - void wdg_lld_start(WDGDriver *wdgp); - void wdg_lld_stop(WDGDriver *wdgp); - void wdg_lld_reset(WDGDriver *wdgp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_WDG == TRUE */ - -#endif /* HAL_WDG_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h deleted file mode 100644 index 1ed33d6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h +++ /dev/null @@ -1,1315 +0,0 @@ - -/****************************************************************************************************//** - * @file nrf51.h - * - * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for - * nrf51 from Nordic Semiconductor. - * - * @version V522 - * @date 26. January 2015 - * - * @note Generated with SVDConv V2.81d - * from CMSIS SVD File 'nrf51.xml' Version 522, - * - * @par Copyright (c) 2013, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * * Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - *******************************************************************************************************/ - - - -/** @addtogroup Nordic Semiconductor - * @{ - */ - -/** @addtogroup nrf51 - * @{ - */ - -#ifndef NRF51_H -#define NRF51_H - -#include "nrf51_bitfields.h" - -#ifdef __cplusplus -extern "C" { -#endif - - -/* ------------------------- Interrupt Number Definition ------------------------ */ - -typedef enum { -/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */ - Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */ - NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */ - HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ - SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */ - DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */ - PendSV_IRQn = -2, /*!< 14 Pendable request for system service */ - SysTick_IRQn = -1, /*!< 15 System Tick Timer */ -/* ---------------------- nrf51 Specific Interrupt Numbers ---------------------- */ - POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */ - RADIO_IRQn = 1, /*!< 1 RADIO */ - UART0_IRQn = 2, /*!< 2 UART0 */ - SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */ - SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */ - GPIOTE_IRQn = 6, /*!< 6 GPIOTE */ - ADC_IRQn = 7, /*!< 7 ADC */ - TIMER0_IRQn = 8, /*!< 8 TIMER0 */ - TIMER1_IRQn = 9, /*!< 9 TIMER1 */ - TIMER2_IRQn = 10, /*!< 10 TIMER2 */ - RTC0_IRQn = 11, /*!< 11 RTC0 */ - TEMP_IRQn = 12, /*!< 12 TEMP */ - RNG_IRQn = 13, /*!< 13 RNG */ - ECB_IRQn = 14, /*!< 14 ECB */ - CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */ - WDT_IRQn = 16, /*!< 16 WDT */ - RTC1_IRQn = 17, /*!< 17 RTC1 */ - QDEC_IRQn = 18, /*!< 18 QDEC */ - LPCOMP_IRQn = 19, /*!< 19 LPCOMP */ - SWI0_IRQn = 20, /*!< 20 SWI0 */ - SWI1_IRQn = 21, /*!< 21 SWI1 */ - SWI2_IRQn = 22, /*!< 22 SWI2 */ - SWI3_IRQn = 23, /*!< 23 SWI3 */ - SWI4_IRQn = 24, /*!< 24 SWI4 */ - SWI5_IRQn = 25 /*!< 25 SWI5 */ -} IRQn_Type; - - -/** @addtogroup Configuration_of_CMSIS - * @{ - */ - - -/* ================================================================================ */ -/* ================ Processor and Core Peripheral Section ================ */ -/* ================================================================================ */ - -/* ----------------Configuration of the Cortex-M0 Processor and Core Peripherals---------------- */ -#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */ -#define __MPU_PRESENT 0 /*!< MPU present or not */ -#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ -/** @} */ /* End of group Configuration_of_CMSIS */ - -#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */ - - -/* ================================================================================ */ -/* ================ Device Specific Peripheral Section ================ */ -/* ================================================================================ */ - - -/** @addtogroup Device_Peripheral_Registers - * @{ - */ - - -/* ------------------- Start of section using anonymous unions ------------------ */ -#if defined(__CC_ARM) - #pragma push - #pragma anon_unions -#elif defined(__ICCARM__) - #pragma language=extended -#elif defined(__GNUC__) - /* anonymous unions are enabled by default */ -#elif defined(__TMS470__) -/* anonymous unions are enabled by default */ -#elif defined(__TASKING__) - #pragma warning 586 -#else - #warning Not supported compiler type -#endif - - -typedef struct { - __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */ - __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */ - __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */ - __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */ - __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */ - __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */ -} AMLI_RAMPRI_Type; - -typedef struct { - __IO uint32_t SCK; /*!< Pin select for SCK. */ - __IO uint32_t MOSI; /*!< Pin select for MOSI. */ - __IO uint32_t MISO; /*!< Pin select for MISO. */ -} SPIM_PSEL_Type; - -typedef struct { - __IO uint32_t PTR; /*!< Data pointer. */ - __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to receive. */ - __I uint32_t AMOUNT; /*!< Number of bytes received in the last transaction. */ -} SPIM_RXD_Type; - -typedef struct { - __IO uint32_t PTR; /*!< Data pointer. */ - __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to send. */ - __I uint32_t AMOUNT; /*!< Number of bytes sent in the last transaction. */ -} SPIM_TXD_Type; - -typedef struct { - __O uint32_t EN; /*!< Enable channel group. */ - __O uint32_t DIS; /*!< Disable channel group. */ -} PPI_TASKS_CHG_Type; - -typedef struct { - __IO uint32_t EEP; /*!< Channel event end-point. */ - __IO uint32_t TEP; /*!< Channel task end-point. */ -} PPI_CH_Type; - - -/* ================================================================================ */ -/* ================ POWER ================ */ -/* ================================================================================ */ - - -/** - * @brief Power Control. (POWER) - */ - -typedef struct { /*!< POWER Structure */ - __I uint32_t RESERVED0[30]; - __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */ - __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */ - __I uint32_t RESERVED1[34]; - __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */ - __I uint32_t RESERVED2[126]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __IO uint32_t RESETREAS; /*!< Reset reason. */ - __I uint32_t RESERVED4[9]; - __I uint32_t RAMSTATUS; /*!< Ram status register. */ - __I uint32_t RESERVED5[53]; - __O uint32_t SYSTEMOFF; /*!< System off register. */ - __I uint32_t RESERVED6[3]; - __IO uint32_t POFCON; /*!< Power failure configuration. */ - __I uint32_t RESERVED7[2]; - __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained - register. */ - __I uint32_t RESERVED8; - __IO uint32_t RAMON; /*!< Ram on/off. */ - __I uint32_t RESERVED9[7]; - __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register - is a retained register. */ - __I uint32_t RESERVED10[3]; - __IO uint32_t RAMONB; /*!< Ram on/off. */ - __I uint32_t RESERVED11[8]; - __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */ - __I uint32_t RESERVED12[291]; - __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */ -} NRF_POWER_Type; - - -/* ================================================================================ */ -/* ================ CLOCK ================ */ -/* ================================================================================ */ - - -/** - * @brief Clock control. (CLOCK) - */ - -typedef struct { /*!< CLOCK Structure */ - __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */ - __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */ - __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */ - __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */ - __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */ - __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */ - __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */ - __I uint32_t RESERVED0[57]; - __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */ - __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */ - __I uint32_t RESERVED1; - __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */ - __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */ - __I uint32_t RESERVED2[124]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[63]; - __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */ - __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */ - __I uint32_t RESERVED4; - __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */ - __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */ - __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is - triggered. */ - __I uint32_t RESERVED5[62]; - __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */ - __I uint32_t RESERVED6[7]; - __IO uint32_t CTIV; /*!< Calibration timer interval. */ - __I uint32_t RESERVED7[5]; - __IO uint32_t XTALFREQ; /*!< Crystal frequency. */ -} NRF_CLOCK_Type; - - -/* ================================================================================ */ -/* ================ MPU ================ */ -/* ================================================================================ */ - - -/** - * @brief Memory Protection Unit. (MPU) - */ - -typedef struct { /*!< MPU Structure */ - __I uint32_t RESERVED0[330]; - __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */ - __IO uint32_t RLENR0; /*!< Length of RAM region 0. */ - __I uint32_t RESERVED1[52]; - __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */ - __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */ - __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */ - __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */ -} NRF_MPU_Type; - - -/* ================================================================================ */ -/* ================ PU ================ */ -/* ================================================================================ */ - - -/** - * @brief Patch unit. (PU) - */ - -typedef struct { /*!< PU Structure */ - __I uint32_t RESERVED0[448]; - __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */ - __I uint32_t RESERVED1[24]; - __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */ - __I uint32_t RESERVED2[24]; - __IO uint32_t PATCHEN; /*!< Patch enable register. */ - __IO uint32_t PATCHENSET; /*!< Patch enable register. */ - __IO uint32_t PATCHENCLR; /*!< Patch disable register. */ -} NRF_PU_Type; - - -/* ================================================================================ */ -/* ================ AMLI ================ */ -/* ================================================================================ */ - - -/** - * @brief AHB Multi-Layer Interface. (AMLI) - */ - -typedef struct { /*!< AMLI Structure */ - __I uint32_t RESERVED0[896]; - AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */ -} NRF_AMLI_Type; - - -/* ================================================================================ */ -/* ================ RADIO ================ */ -/* ================================================================================ */ - - -/** - * @brief The radio. (RADIO) - */ - -typedef struct { /*!< RADIO Structure */ - __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */ - __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */ - __O uint32_t TASKS_START; /*!< Start radio. */ - __O uint32_t TASKS_STOP; /*!< Stop radio. */ - __O uint32_t TASKS_DISABLE; /*!< Disable radio. */ - __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */ - __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */ - __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */ - __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */ - __I uint32_t RESERVED0[55]; - __IO uint32_t EVENTS_READY; /*!< Ready event. */ - __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */ - __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */ - __IO uint32_t EVENTS_END; /*!< End event. */ - __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */ - __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */ - __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */ - __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI - sample is ready for readout at the RSSISAMPLE register. */ - __I uint32_t RESERVED1[2]; - __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BCC register. */ - __I uint32_t RESERVED2[53]; - __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */ - __I uint32_t RESERVED3[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED4[61]; - __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */ - __I uint32_t CD; /*!< Carrier detect. */ - __I uint32_t RXMATCH; /*!< Received address. */ - __I uint32_t RXCRC; /*!< Received CRC. */ - __I uint32_t DAI; /*!< Device address match index. */ - __I uint32_t RESERVED5[60]; - __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */ - __IO uint32_t FREQUENCY; /*!< Frequency. */ - __IO uint32_t TXPOWER; /*!< Output power. */ - __IO uint32_t MODE; /*!< Data rate and modulation. */ - __IO uint32_t PCNF0; /*!< Packet configuration 0. */ - __IO uint32_t PCNF1; /*!< Packet configuration 1. */ - __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */ - __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */ - __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */ - __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */ - __IO uint32_t TXADDRESS; /*!< Transmit address select. */ - __IO uint32_t RXADDRESSES; /*!< Receive address select. */ - __IO uint32_t CRCCNF; /*!< CRC configuration. */ - __IO uint32_t CRCPOLY; /*!< CRC polynomial. */ - __IO uint32_t CRCINIT; /*!< CRC initial value. */ - __IO uint32_t TEST; /*!< Test features enable register. */ - __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */ - __I uint32_t RSSISAMPLE; /*!< RSSI sample. */ - __I uint32_t RESERVED6; - __I uint32_t STATE; /*!< Current radio state. */ - __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */ - __I uint32_t RESERVED7[2]; - __IO uint32_t BCC; /*!< Bit counter compare. */ - __I uint32_t RESERVED8[39]; - __IO uint32_t DAB[8]; /*!< Device address base segment. */ - __IO uint32_t DAP[8]; /*!< Device address prefix. */ - __IO uint32_t DACNF; /*!< Device address match configuration. */ - __I uint32_t RESERVED9[56]; - __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */ - __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */ - __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */ - __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */ - __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */ - __I uint32_t RESERVED10[561]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_RADIO_Type; - - -/* ================================================================================ */ -/* ================ UART ================ */ -/* ================================================================================ */ - - -/** - * @brief Universal Asynchronous Receiver/Transmitter. (UART) - */ - -typedef struct { /*!< UART Structure */ - __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */ - __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */ - __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */ - __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */ - __I uint32_t RESERVED0[3]; - __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */ - __I uint32_t RESERVED1[56]; - __IO uint32_t EVENTS_CTS; /*!< CTS activated. */ - __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */ - __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */ - __I uint32_t RESERVED2[4]; - __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */ - __I uint32_t RESERVED3; - __IO uint32_t EVENTS_ERROR; /*!< Error detected. */ - __I uint32_t RESERVED4[7]; - __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ - __I uint32_t RESERVED5[46]; - __IO uint32_t SHORTS; /*!< Shortcuts for UART. */ - __I uint32_t RESERVED6[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED7[93]; - __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */ - __I uint32_t RESERVED8[31]; - __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */ - __I uint32_t RESERVED9; - __IO uint32_t PSELRTS; /*!< Pin select for RTS. */ - __IO uint32_t PSELTXD; /*!< Pin select for TXD. */ - __IO uint32_t PSELCTS; /*!< Pin select for CTS. */ - __IO uint32_t PSELRXD; /*!< Pin select for RXD. */ - __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced. - Once read the character is consumed. If read when no character - available, the UART will stop working. */ - __O uint32_t TXD; /*!< TXD register. */ - __I uint32_t RESERVED10; - __IO uint32_t BAUDRATE; /*!< UART Baudrate. */ - __I uint32_t RESERVED11[17]; - __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */ - __I uint32_t RESERVED12[675]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_UART_Type; - - -/* ================================================================================ */ -/* ================ SPI ================ */ -/* ================================================================================ */ - - -/** - * @brief SPI master 0. (SPI) - */ - -typedef struct { /*!< SPI Structure */ - __I uint32_t RESERVED0[66]; - __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */ - __I uint32_t RESERVED1[126]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[125]; - __IO uint32_t ENABLE; /*!< Enable SPI. */ - __I uint32_t RESERVED3; - __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ - __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ - __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ - __I uint32_t RESERVED4; - __I uint32_t RXD; /*!< RX data. */ - __IO uint32_t TXD; /*!< TX data. */ - __I uint32_t RESERVED5; - __IO uint32_t FREQUENCY; /*!< SPI frequency */ - __I uint32_t RESERVED6[11]; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED7[681]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_SPI_Type; - - -/* ================================================================================ */ -/* ================ TWI ================ */ -/* ================================================================================ */ - - -/** - * @brief Two-wire interface master 0. (TWI) - */ - -typedef struct { /*!< TWI Structure */ - __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */ - __I uint32_t RESERVED0; - __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */ - __I uint32_t RESERVED1[2]; - __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */ - __I uint32_t RESERVED2; - __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */ - __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */ - __I uint32_t RESERVED3[56]; - __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */ - __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */ - __I uint32_t RESERVED4[4]; - __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */ - __I uint32_t RESERVED5; - __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */ - __I uint32_t RESERVED6[4]; - __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */ - __I uint32_t RESERVED7[3]; - __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */ - __I uint32_t RESERVED8[45]; - __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED9[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED10[110]; - __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */ - __I uint32_t RESERVED11[14]; - __IO uint32_t ENABLE; /*!< Enable two-wire master. */ - __I uint32_t RESERVED12; - __IO uint32_t PSELSCL; /*!< Pin select for SCL. */ - __IO uint32_t PSELSDA; /*!< Pin select for SDA. */ - __I uint32_t RESERVED13[2]; - __I uint32_t RXD; /*!< RX data register. */ - __IO uint32_t TXD; /*!< TX data register. */ - __I uint32_t RESERVED14; - __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */ - __I uint32_t RESERVED15[24]; - __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */ - __I uint32_t RESERVED16[668]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_TWI_Type; - - -/* ================================================================================ */ -/* ================ SPIS ================ */ -/* ================================================================================ */ - - -/** - * @brief SPI slave 1. (SPIS) - */ - -typedef struct { /*!< SPIS Structure */ - __I uint32_t RESERVED0[9]; - __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */ - __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */ - __I uint32_t RESERVED1[54]; - __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */ - __I uint32_t RESERVED2[8]; - __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */ - __I uint32_t RESERVED3[53]; - __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */ - __I uint32_t RESERVED4[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED5[61]; - __I uint32_t SEMSTAT; /*!< Semaphore status. */ - __I uint32_t RESERVED6[15]; - __IO uint32_t STATUS; /*!< Status from last transaction. */ - __I uint32_t RESERVED7[47]; - __IO uint32_t ENABLE; /*!< Enable SPIS. */ - __I uint32_t RESERVED8; - __IO uint32_t PSELSCK; /*!< Pin select for SCK. */ - __IO uint32_t PSELMISO; /*!< Pin select for MISO. */ - __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */ - __IO uint32_t PSELCSN; /*!< Pin select for CSN. */ - __I uint32_t RESERVED9[7]; - __IO uint32_t RXDPTR; /*!< RX data pointer. */ - __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */ - __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */ - __I uint32_t RESERVED10; - __IO uint32_t TXDPTR; /*!< TX data pointer. */ - __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */ - __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */ - __I uint32_t RESERVED11; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED12; - __IO uint32_t DEF; /*!< Default character. */ - __I uint32_t RESERVED13[24]; - __IO uint32_t ORC; /*!< Over-read character. */ - __I uint32_t RESERVED14[654]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_SPIS_Type; - - -/* ================================================================================ */ -/* ================ SPIM ================ */ -/* ================================================================================ */ - - -/** - * @brief SPI master with easyDMA 1. (SPIM) - */ - -typedef struct { /*!< SPIM Structure */ - __I uint32_t RESERVED0[4]; - __O uint32_t TASKS_START; /*!< Start SPI transaction. */ - __O uint32_t TASKS_STOP; /*!< Stop SPI transaction. */ - __I uint32_t RESERVED1; - __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction. */ - __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction. */ - __I uint32_t RESERVED2[56]; - __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped. */ - __I uint32_t RESERVED3[2]; - __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached. */ - __I uint32_t RESERVED4; - __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached. */ - __I uint32_t RESERVED5; - __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached. */ - __I uint32_t RESERVED6[10]; - __IO uint32_t EVENTS_STARTED; /*!< Transaction started. */ - __I uint32_t RESERVED7[44]; - __IO uint32_t SHORTS; /*!< Shortcuts for SPIM. */ - __I uint32_t RESERVED8[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED9[125]; - __IO uint32_t ENABLE; /*!< Enable SPIM. */ - __I uint32_t RESERVED10; - SPIM_PSEL_Type PSEL; /*!< Pin select configuration. */ - __I uint32_t RESERVED11[4]; - __IO uint32_t FREQUENCY; /*!< SPI frequency. */ - __I uint32_t RESERVED12[3]; - SPIM_RXD_Type RXD; /*!< RXD EasyDMA configuration and status. */ - __I uint32_t RESERVED13; - SPIM_TXD_Type TXD; /*!< TXD EasyDMA configuration and status. */ - __I uint32_t RESERVED14; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED15[26]; - __IO uint32_t ORC; /*!< Over-read character. */ - __I uint32_t RESERVED16[654]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_SPIM_Type; - - -/* ================================================================================ */ -/* ================ GPIOTE ================ */ -/* ================================================================================ */ - - -/** - * @brief GPIO tasks and events. (GPIOTE) - */ - -typedef struct { /*!< GPIOTE Structure */ - __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */ - __I uint32_t RESERVED0[60]; - __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */ - __I uint32_t RESERVED1[27]; - __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */ - __I uint32_t RESERVED2[97]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[129]; - __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */ - __I uint32_t RESERVED4[695]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_GPIOTE_Type; - - -/* ================================================================================ */ -/* ================ ADC ================ */ -/* ================================================================================ */ - - -/** - * @brief Analog to digital converter. (ADC) - */ - -typedef struct { /*!< ADC Structure */ - __O uint32_t TASKS_START; /*!< Start an ADC conversion. */ - __O uint32_t TASKS_STOP; /*!< Stop ADC. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */ - __I uint32_t RESERVED1[128]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[61]; - __I uint32_t BUSY; /*!< ADC busy register. */ - __I uint32_t RESERVED3[63]; - __IO uint32_t ENABLE; /*!< ADC enable. */ - __IO uint32_t CONFIG; /*!< ADC configuration register. */ - __I uint32_t RESULT; /*!< Result of ADC conversion. */ - __I uint32_t RESERVED4[700]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_ADC_Type; - - -/* ================================================================================ */ -/* ================ TIMER ================ */ -/* ================================================================================ */ - - -/** - * @brief Timer 0. (TIMER) - */ - -typedef struct { /*!< TIMER Structure */ - __O uint32_t TASKS_START; /*!< Start Timer. */ - __O uint32_t TASKS_STOP; /*!< Stop Timer. */ - __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */ - __O uint32_t TASKS_CLEAR; /*!< Clear timer. */ - __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */ - __I uint32_t RESERVED0[11]; - __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */ - __I uint32_t RESERVED1[60]; - __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ - __I uint32_t RESERVED2[44]; - __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */ - __I uint32_t RESERVED3[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED4[126]; - __IO uint32_t MODE; /*!< Timer Mode selection. */ - __IO uint32_t BITMODE; /*!< Sets timer behaviour. */ - __I uint32_t RESERVED5; - __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source - clock frequency is divided by 2^SCALE. */ - __I uint32_t RESERVED6[11]; - __IO uint32_t CC[4]; /*!< Capture/compare registers. */ - __I uint32_t RESERVED7[683]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_TIMER_Type; - - -/* ================================================================================ */ -/* ================ RTC ================ */ -/* ================================================================================ */ - - -/** - * @brief Real time counter 0. (RTC) - */ - -typedef struct { /*!< RTC Structure */ - __O uint32_t TASKS_START; /*!< Start RTC Counter. */ - __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */ - __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */ - __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */ - __I uint32_t RESERVED0[60]; - __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */ - __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */ - __I uint32_t RESERVED1[14]; - __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */ - __I uint32_t RESERVED2[109]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[13]; - __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */ - __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives - the value of EVTEN. */ - __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register - gives the value of EVTEN. */ - __I uint32_t RESERVED4[110]; - __I uint32_t COUNTER; /*!< Current COUNTER value. */ - __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). - Must be written when RTC is STOPed. */ - __I uint32_t RESERVED5[13]; - __IO uint32_t CC[4]; /*!< Capture/compare registers. */ - __I uint32_t RESERVED6[683]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_RTC_Type; - - -/* ================================================================================ */ -/* ================ TEMP ================ */ -/* ================================================================================ */ - - -/** - * @brief Temperature Sensor. (TEMP) - */ - -typedef struct { /*!< TEMP Structure */ - __O uint32_t TASKS_START; /*!< Start temperature measurement. */ - __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */ - __I uint32_t RESERVED1[128]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[127]; - __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */ - __I uint32_t RESERVED3[700]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_TEMP_Type; - - -/* ================================================================================ */ -/* ================ RNG ================ */ -/* ================================================================================ */ - - -/** - * @brief Random Number Generator. (RNG) - */ - -typedef struct { /*!< RNG Structure */ - __O uint32_t TASKS_START; /*!< Start the random number generator. */ - __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */ - __I uint32_t RESERVED1[63]; - __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */ - __I uint32_t RESERVED3[126]; - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t VALUE; /*!< RNG random number. */ - __I uint32_t RESERVED4[700]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_RNG_Type; - - -/* ================================================================================ */ -/* ================ ECB ================ */ -/* ================================================================================ */ - - -/** - * @brief AES ECB Mode Encryption. (ECB) - */ - -typedef struct { /*!< ECB Structure */ - __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this - will not initiate a new encryption and the ERRORECB event will - be triggered. */ - __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running, - this will will trigger the ERRORECB event. */ - __I uint32_t RESERVED0[62]; - __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */ - __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an - error. */ - __I uint32_t RESERVED1[127]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[126]; - __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */ - __I uint32_t RESERVED3[701]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_ECB_Type; - - -/* ================================================================================ */ -/* ================ AAR ================ */ -/* ================================================================================ */ - - -/** - * @brief Accelerated Address Resolver. (AAR) - */ - -typedef struct { /*!< AAR Structure */ - __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK - data structure. */ - __I uint32_t RESERVED0; - __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */ - __I uint32_t RESERVED1[61]; - __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */ - __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */ - __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */ - __I uint32_t RESERVED2[126]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __I uint32_t STATUS; /*!< Resolution status. */ - __I uint32_t RESERVED4[63]; - __IO uint32_t ENABLE; /*!< Enable AAR. */ - __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */ - __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */ - __I uint32_t RESERVED5; - __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */ - __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage - during resolution. A minimum of 3 bytes must be reserved. */ - __I uint32_t RESERVED6[697]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_AAR_Type; - - -/* ================================================================================ */ -/* ================ CCM ================ */ -/* ================================================================================ */ - - -/** - * @brief AES CCM Mode Encryption. (CCM) - */ - -typedef struct { /*!< CCM Structure */ - __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by - itself when completed. */ - __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when - completed. */ - __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */ - __I uint32_t RESERVED0[61]; - __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */ - __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */ - __IO uint32_t EVENTS_ERROR; /*!< Error happened. */ - __I uint32_t RESERVED1[61]; - __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */ - __I uint32_t RESERVED4[63]; - __IO uint32_t ENABLE; /*!< CCM enable. */ - __IO uint32_t MODE; /*!< Operation mode. */ - __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */ - __IO uint32_t INPTR; /*!< Pointer to the input packet. */ - __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */ - __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage - during resolution. A minimum of 43 bytes must be reserved. */ - __I uint32_t RESERVED5[697]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_CCM_Type; - - -/* ================================================================================ */ -/* ================ WDT ================ */ -/* ================================================================================ */ - - -/** - * @brief Watchdog Timer. (WDT) - */ - -typedef struct { /*!< WDT Structure */ - __O uint32_t TASKS_START; /*!< Start the watchdog. */ - __I uint32_t RESERVED0[63]; - __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */ - __I uint32_t RESERVED1[128]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED2[61]; - __I uint32_t RUNSTATUS; /*!< Watchdog running status. */ - __I uint32_t REQSTATUS; /*!< Request status. */ - __I uint32_t RESERVED3[63]; - __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */ - __IO uint32_t RREN; /*!< Reload request enable. */ - __IO uint32_t CONFIG; /*!< Configuration register. */ - __I uint32_t RESERVED4[60]; - __O uint32_t RR[8]; /*!< Reload requests registers. */ - __I uint32_t RESERVED5[631]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_WDT_Type; - - -/* ================================================================================ */ -/* ================ QDEC ================ */ -/* ================================================================================ */ - - -/** - * @brief Rotary decoder. (QDEC) - */ - -typedef struct { /*!< QDEC Structure */ - __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */ - __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */ - __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers, - and clears the ACC registers. */ - __I uint32_t RESERVED0[61]; - __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */ - __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and - ACC register different than zero. */ - __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */ - __I uint32_t RESERVED1[61]; - __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[125]; - __IO uint32_t ENABLE; /*!< Enable the QDEC. */ - __IO uint32_t LEDPOL; /*!< LED output pin polarity. */ - __IO uint32_t SAMPLEPER; /*!< Sample period. */ - __I int32_t SAMPLE; /*!< Motion sample value. */ - __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */ - __I int32_t ACC; /*!< Accumulated valid transitions register. */ - __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC - task. */ - __IO uint32_t PSELLED; /*!< Pin select for LED output. */ - __IO uint32_t PSELA; /*!< Pin select for phase A input. */ - __IO uint32_t PSELB; /*!< Pin select for phase B input. */ - __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */ - __I uint32_t RESERVED4[5]; - __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */ - __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */ - __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC - task. */ - __I uint32_t RESERVED5[684]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_QDEC_Type; - - -/* ================================================================================ */ -/* ================ LPCOMP ================ */ -/* ================================================================================ */ - - -/** - * @brief Low power comparator. (LPCOMP) - */ - -typedef struct { /*!< LPCOMP Structure */ - __O uint32_t TASKS_START; /*!< Start the comparator. */ - __O uint32_t TASKS_STOP; /*!< Stop the comparator. */ - __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */ - __I uint32_t RESERVED0[61]; - __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */ - __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */ - __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */ - __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */ - __I uint32_t RESERVED1[60]; - __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */ - __I uint32_t RESERVED2[64]; - __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ - __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ - __I uint32_t RESERVED3[61]; - __I uint32_t RESULT; /*!< Result of last compare. */ - __I uint32_t RESERVED4[63]; - __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */ - __IO uint32_t PSEL; /*!< Input pin select. */ - __IO uint32_t REFSEL; /*!< Reference select. */ - __IO uint32_t EXTREFSEL; /*!< External reference select. */ - __I uint32_t RESERVED5[4]; - __IO uint32_t ANADETECT; /*!< Analog detect configuration. */ - __I uint32_t RESERVED6[694]; - __IO uint32_t POWER; /*!< Peripheral power control. */ -} NRF_LPCOMP_Type; - - -/* ================================================================================ */ -/* ================ SWI ================ */ -/* ================================================================================ */ - - -/** - * @brief SW Interrupts. (SWI) - */ - -typedef struct { /*!< SWI Structure */ - __I uint32_t UNUSED; /*!< Unused. */ -} NRF_SWI_Type; - - -/* ================================================================================ */ -/* ================ NVMC ================ */ -/* ================================================================================ */ - - -/** - * @brief Non Volatile Memory Controller. (NVMC) - */ - -typedef struct { /*!< NVMC Structure */ - __I uint32_t RESERVED0[256]; - __I uint32_t READY; /*!< Ready flag. */ - __I uint32_t RESERVED1[64]; - __IO uint32_t CONFIG; /*!< Configuration register. */ - - union { - __IO uint32_t ERASEPCR1; /*!< Register for erasing a non-protected non-volatile memory page. */ - __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */ - }; - __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */ - - union { - __IO uint32_t ERASEPCR0; /*!< Register for erasing a protected non-volatile memory page. */ - __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */ - }; - __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */ -} NRF_NVMC_Type; - - -/* ================================================================================ */ -/* ================ PPI ================ */ -/* ================================================================================ */ - - -/** - * @brief PPI controller. (PPI) - */ - -typedef struct { /*!< PPI Structure */ - PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */ - __I uint32_t RESERVED0[312]; - __IO uint32_t CHEN; /*!< Channel enable. */ - __IO uint32_t CHENSET; /*!< Channel enable set. */ - __IO uint32_t CHENCLR; /*!< Channel enable clear. */ - __I uint32_t RESERVED1; - PPI_CH_Type CH[16]; /*!< PPI Channel. */ - __I uint32_t RESERVED2[156]; - __IO uint32_t CHG[4]; /*!< Channel group configuration. */ -} NRF_PPI_Type; - - -/* ================================================================================ */ -/* ================ FICR ================ */ -/* ================================================================================ */ - - -/** - * @brief Factory Information Configuration. (FICR) - */ - -typedef struct { /*!< FICR Structure */ - __I uint32_t RESERVED0[4]; - __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */ - __I uint32_t CODESIZE; /*!< Code memory size in pages. */ - __I uint32_t RESERVED1[4]; - __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */ - __I uint32_t PPFC; /*!< Pre-programmed factory code present. */ - __I uint32_t RESERVED2; - __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */ - - union { - __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is - kept for backward compatinility purposes. Use SIZERAMBLOCKS - instead. */ - __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */ - }; - __I uint32_t RESERVED3[5]; - __I uint32_t CONFIGID; /*!< Configuration identifier. */ - __I uint32_t DEVICEID[2]; /*!< Device identifier. */ - __I uint32_t RESERVED4[6]; - __I uint32_t ER[4]; /*!< Encryption root. */ - __I uint32_t IR[4]; /*!< Identity root. */ - __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */ - __I uint32_t DEVICEADDR[2]; /*!< Device address. */ - __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */ - __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit - mode. */ - __I uint32_t RESERVED5[10]; - __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit - mode. */ -} NRF_FICR_Type; - - -/* ================================================================================ */ -/* ================ UICR ================ */ -/* ================================================================================ */ - - -/** - * @brief User Information Configuration. (UICR) - */ - -typedef struct { /*!< UICR Structure */ - __IO uint32_t CLENR0; /*!< Length of code region 0. */ - __IO uint32_t RBPCONF; /*!< Readback protection configuration. */ - __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */ - __I uint32_t RESERVED0; - __I uint32_t FWID; /*!< Firmware ID. */ - - union { - __IO uint32_t NRFFW[15]; /*!< Reserved for Nordic firmware design. */ - __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */ - }; - __IO uint32_t NRFHW[12]; /*!< Reserved for Nordic hardware design. */ - __IO uint32_t CUSTOMER[32]; /*!< Reserved for customer. */ -} NRF_UICR_Type; - - -/* ================================================================================ */ -/* ================ GPIO ================ */ -/* ================================================================================ */ - - -/** - * @brief General purpose input and output. (GPIO) - */ - -typedef struct { /*!< GPIO Structure */ - __I uint32_t RESERVED0[321]; - __IO uint32_t OUT; /*!< Write GPIO port. */ - __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */ - __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */ - __I uint32_t IN; /*!< Read GPIO port. */ - __IO uint32_t DIR; /*!< Direction of GPIO pins. */ - __IO uint32_t DIRSET; /*!< DIR set register. */ - __IO uint32_t DIRCLR; /*!< DIR clear register. */ - __I uint32_t RESERVED1[120]; - __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */ -} NRF_GPIO_Type; - - -/* -------------------- End of section using anonymous unions ------------------- */ -#if defined(__CC_ARM) - #pragma pop -#elif defined(__ICCARM__) - /* leave anonymous unions enabled */ -#elif defined(__GNUC__) - /* anonymous unions are enabled by default */ -#elif defined(__TMS470__) - /* anonymous unions are enabled by default */ -#elif defined(__TASKING__) - #pragma warning restore -#else - #warning Not supported compiler type -#endif - - - - -/* ================================================================================ */ -/* ================ Peripheral memory map ================ */ -/* ================================================================================ */ - -#define NRF_POWER_BASE 0x40000000UL -#define NRF_CLOCK_BASE 0x40000000UL -#define NRF_MPU_BASE 0x40000000UL -#define NRF_PU_BASE 0x40000000UL -#define NRF_AMLI_BASE 0x40000000UL -#define NRF_RADIO_BASE 0x40001000UL -#define NRF_UART0_BASE 0x40002000UL -#define NRF_SPI0_BASE 0x40003000UL -#define NRF_TWI0_BASE 0x40003000UL -#define NRF_SPI1_BASE 0x40004000UL -#define NRF_TWI1_BASE 0x40004000UL -#define NRF_SPIS1_BASE 0x40004000UL -#define NRF_SPIM1_BASE 0x40004000UL -#define NRF_GPIOTE_BASE 0x40006000UL -#define NRF_ADC_BASE 0x40007000UL -#define NRF_TIMER0_BASE 0x40008000UL -#define NRF_TIMER1_BASE 0x40009000UL -#define NRF_TIMER2_BASE 0x4000A000UL -#define NRF_RTC0_BASE 0x4000B000UL -#define NRF_TEMP_BASE 0x4000C000UL -#define NRF_RNG_BASE 0x4000D000UL -#define NRF_ECB_BASE 0x4000E000UL -#define NRF_AAR_BASE 0x4000F000UL -#define NRF_CCM_BASE 0x4000F000UL -#define NRF_WDT_BASE 0x40010000UL -#define NRF_RTC1_BASE 0x40011000UL -#define NRF_QDEC_BASE 0x40012000UL -#define NRF_LPCOMP_BASE 0x40013000UL -#define NRF_SWI_BASE 0x40014000UL -#define NRF_NVMC_BASE 0x4001E000UL -#define NRF_PPI_BASE 0x4001F000UL -#define NRF_FICR_BASE 0x10000000UL -#define NRF_UICR_BASE 0x10001000UL -#define NRF_GPIO_BASE 0x50000000UL - - -/* ================================================================================ */ -/* ================ Peripheral declaration ================ */ -/* ================================================================================ */ - -#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE) -#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE) -#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE) -#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE) -#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE) -#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE) -#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE) -#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE) -#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE) -#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE) -#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE) -#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE) -#define NRF_SPIM1 ((NRF_SPIM_Type *) NRF_SPIM1_BASE) -#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE) -#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE) -#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE) -#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE) -#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE) -#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE) -#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE) -#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE) -#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE) -#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE) -#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE) -#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE) -#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE) -#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE) -#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE) -#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE) -#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE) -#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE) -#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE) -#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE) -#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE) - - -/** @} */ /* End of group Device_Peripheral_Registers */ -/** @} */ /* End of group nrf51 */ -/** @} */ /* End of group Nordic Semiconductor */ - -#ifdef __cplusplus -} -#endif - - -#endif /* nrf51_H */ - diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h deleted file mode 100644 index 0ab4598..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h +++ /dev/null @@ -1,7088 +0,0 @@ -/* Copyright (c) 2015, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * * Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ -#ifndef __NRF51_BITS_H -#define __NRF51_BITS_H - -/*lint ++flb "Enter library region" */ - -/* Peripheral: AAR */ -/* Description: Accelerated Address Resolver. */ - -/* Register: AAR_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ -#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on RESOLVED event. */ -#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: AAR_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ -#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on RESOLVED event. */ -#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: AAR_STATUS */ -/* Description: Resolution status. */ - -/* Bits 3..0 : The IRK used last time an address was resolved. */ -#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ - -/* Register: AAR_ENABLE */ -/* Description: Enable AAR. */ - -/* Bits 1..0 : Enable AAR. */ -#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ -#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ - -/* Register: AAR_NIRK */ -/* Description: Number of Identity root Keys in the IRK data structure. */ - -/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ -#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ -#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ - -/* Register: AAR_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: ADC */ -/* Description: Analog to digital converter. */ - -/* Register: ADC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ADC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on END event. */ -#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ADC_BUSY */ -/* Description: ADC busy register. */ - -/* Bit 0 : ADC busy register. */ -#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ -#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ -#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ -#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ - -/* Register: ADC_ENABLE */ -/* Description: ADC enable. */ - -/* Bits 1..0 : ADC enable. */ -#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ -#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ - -/* Register: ADC_CONFIG */ -/* Description: ADC configuration register. */ - -/* Bits 17..16 : ADC external reference pin selection. */ -#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ - -/* Bits 15..8 : ADC analog pin selection. */ -#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ -#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ - -/* Bits 6..5 : ADC reference selection. */ -#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ -#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ -#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ -#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ -#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ - -/* Bits 4..2 : ADC input selection. */ -#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ -#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ -#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ - -/* Bits 1..0 : ADC resolution. */ -#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ -#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ -#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ -#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ -#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ - -/* Register: ADC_RESULT */ -/* Description: Result of ADC conversion. */ - -/* Bits 9..0 : Result of ADC conversion. */ -#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ - -/* Register: ADC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: AMLI */ -/* Description: AHB Multi-Layer Interface. */ - -/* Register: AMLI_RAMPRI_CPU0 */ -/* Description: Configurable priority configuration register for CPU0. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_SPIS1 */ -/* Description: Configurable priority configuration register for SPIS1. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_RADIO */ -/* Description: Configurable priority configuration register for RADIO. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_ECB */ -/* Description: Configurable priority configuration register for ECB. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_CCM */ -/* Description: Configurable priority configuration register for CCM. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_AAR */ -/* Description: Configurable priority configuration register for AAR. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - - -/* Peripheral: CCM */ -/* Description: AES CCM Mode Encryption. */ - -/* Register: CCM_SHORTS */ -/* Description: Shortcuts for the CCM. */ - -/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: CCM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ERROR event. */ -#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ENDCRYPT event. */ -#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDKSGEN event. */ -#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CCM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ERROR event. */ -#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ENDCRYPT event. */ -#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CCM_MICSTATUS */ -/* Description: CCM RX MIC check result. */ - -/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ -#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ -#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ - -/* Register: CCM_ENABLE */ -/* Description: CCM enable. */ - -/* Bits 1..0 : CCM enable. */ -#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ -#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ - -/* Register: CCM_MODE */ -/* Description: Operation mode. */ - -/* Bit 0 : CCM mode operation. */ -#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ -#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ - -/* Register: CCM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: CLOCK */ -/* Description: Clock control. */ - -/* Register: CLOCK_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 4 : Enable interrupt on CTTO event. */ -#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on DONE event. */ -#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CLOCK_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 4 : Disable interrupt on CTTO event. */ -#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on DONE event. */ -#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CLOCK_HFCLKRUN */ -/* Description: Task HFCLKSTART trigger status. */ - -/* Bit 0 : Task HFCLKSTART trigger status. */ -#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ -#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ - -/* Register: CLOCK_HFCLKSTAT */ -/* Description: High frequency clock status. */ - -/* Bit 16 : State for the HFCLK. */ -#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ -#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ - -/* Bit 0 : Active clock source for the HF clock. */ -#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ -#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ - -/* Register: CLOCK_LFCLKRUN */ -/* Description: Task LFCLKSTART triggered status. */ - -/* Bit 0 : Task LFCLKSTART triggered status. */ -#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ -#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ - -/* Register: CLOCK_LFCLKSTAT */ -/* Description: Low frequency clock status. */ - -/* Bit 16 : State for the LF clock. */ -#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ -#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ - -/* Bits 1..0 : Active clock source for the LF clock. */ -#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ - -/* Register: CLOCK_LFCLKSRCCOPY */ -/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ - -/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_LFCLKSRC */ -/* Description: Clock source for the LFCLK clock. */ - -/* Bits 1..0 : Clock source. */ -#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_CTIV */ -/* Description: Calibration timer interval. */ - -/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ -#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ -#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ - -/* Register: CLOCK_XTALFREQ */ -/* Description: Crystal frequency. */ - -/* Bits 7..0 : External Xtal frequency selection. */ -#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ -#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ - - -/* Peripheral: ECB */ -/* Description: AES ECB Mode Encryption. */ - -/* Register: ECB_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 1 : Enable interrupt on ERRORECB event. */ -#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDECB event. */ -#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ECB_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 1 : Disable interrupt on ERRORECB event. */ -#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDECB event. */ -#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ECB_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: FICR */ -/* Description: Factory Information Configuration. */ - -/* Register: FICR_PPFC */ -/* Description: Pre-programmed factory code present. */ - -/* Bits 7..0 : Pre-programmed factory code present. */ -#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ -#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ -#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ -#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ - -/* Register: FICR_CONFIGID */ -/* Description: Configuration identifier. */ - -/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ -#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ -#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ - -/* Bits 15..0 : Hardware Identification Number. */ -#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ -#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ - -/* Register: FICR_DEVICEADDRTYPE */ -/* Description: Device address type. */ - -/* Bit 0 : Device address type. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ - -/* Register: FICR_OVERRIDEEN */ -/* Description: Radio calibration override enable. */ - -/* Bit 3 : Override default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ - -/* Bit 0 : Override default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ - - -/* Peripheral: GPIO */ -/* Description: General purpose input and output. */ - -/* Register: GPIO_OUT */ -/* Description: Write GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ - -/* Register: GPIO_OUTSET */ -/* Description: Set individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ - -/* Register: GPIO_OUTCLR */ -/* Description: Clear individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ - -/* Register: GPIO_IN */ -/* Description: Read GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ - -/* Register: GPIO_DIR */ -/* Description: Direction of GPIO pins. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ - -/* Register: GPIO_DIRSET */ -/* Description: DIR set register. */ - -/* Bit 31 : Set as output pin 31. */ -#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ - -/* Bit 30 : Set as output pin 30. */ -#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ - -/* Bit 29 : Set as output pin 29. */ -#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ - -/* Bit 28 : Set as output pin 28. */ -#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ - -/* Bit 27 : Set as output pin 27. */ -#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ - -/* Bit 26 : Set as output pin 26. */ -#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ - -/* Bit 25 : Set as output pin 25. */ -#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ - -/* Bit 24 : Set as output pin 24. */ -#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ - -/* Bit 23 : Set as output pin 23. */ -#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ - -/* Bit 22 : Set as output pin 22. */ -#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ - -/* Bit 21 : Set as output pin 21. */ -#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ - -/* Bit 20 : Set as output pin 20. */ -#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ - -/* Bit 19 : Set as output pin 19. */ -#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ - -/* Bit 18 : Set as output pin 18. */ -#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ - -/* Bit 17 : Set as output pin 17. */ -#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ - -/* Bit 16 : Set as output pin 16. */ -#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ - -/* Bit 15 : Set as output pin 15. */ -#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ - -/* Bit 14 : Set as output pin 14. */ -#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ - -/* Bit 13 : Set as output pin 13. */ -#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ - -/* Bit 12 : Set as output pin 12. */ -#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ - -/* Bit 11 : Set as output pin 11. */ -#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ - -/* Bit 10 : Set as output pin 10. */ -#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ - -/* Bit 9 : Set as output pin 9. */ -#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ - -/* Bit 8 : Set as output pin 8. */ -#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ - -/* Bit 7 : Set as output pin 7. */ -#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ - -/* Bit 6 : Set as output pin 6. */ -#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ - -/* Bit 5 : Set as output pin 5. */ -#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ - -/* Bit 4 : Set as output pin 4. */ -#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ - -/* Bit 3 : Set as output pin 3. */ -#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ - -/* Bit 2 : Set as output pin 2. */ -#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ - -/* Bit 1 : Set as output pin 1. */ -#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ - -/* Bit 0 : Set as output pin 0. */ -#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ - -/* Register: GPIO_DIRCLR */ -/* Description: DIR clear register. */ - -/* Bit 31 : Set as input pin 31. */ -#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 30 : Set as input pin 30. */ -#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 29 : Set as input pin 29. */ -#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 28 : Set as input pin 28. */ -#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 27 : Set as input pin 27. */ -#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 26 : Set as input pin 26. */ -#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 25 : Set as input pin 25. */ -#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 24 : Set as input pin 24. */ -#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 23 : Set as input pin 23. */ -#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 22 : Set as input pin 22. */ -#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 21 : Set as input pin 21. */ -#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 20 : Set as input pin 20. */ -#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 19 : Set as input pin 19. */ -#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 18 : Set as input pin 18. */ -#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 17 : Set as input pin 17. */ -#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 16 : Set as input pin 16. */ -#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 15 : Set as input pin 15. */ -#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 14 : Set as input pin 14. */ -#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 13 : Set as input pin 13. */ -#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 12 : Set as input pin 12. */ -#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 11 : Set as input pin 11. */ -#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 10 : Set as input pin 10. */ -#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 9 : Set as input pin 9. */ -#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 8 : Set as input pin 8. */ -#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 7 : Set as input pin 7. */ -#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 6 : Set as input pin 6. */ -#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 5 : Set as input pin 5. */ -#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 4 : Set as input pin 4. */ -#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 3 : Set as input pin 3. */ -#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 2 : Set as input pin 2. */ -#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 1 : Set as input pin 1. */ -#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 0 : Set as input pin 0. */ -#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ - -/* Register: GPIO_PIN_CNF */ -/* Description: Configuration of GPIO pins. */ - -/* Bits 17..16 : Pin sensing mechanism. */ -#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ -#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ - -/* Bits 10..8 : Drive configuration. */ -#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ - -/* Bits 3..2 : Pull-up or -down configuration. */ -#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ -#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ -#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ -#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ -#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ - -/* Bit 1 : Connect or disconnect input path. */ -#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ -#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ - -/* Bit 0 : Pin direction. */ -#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ -#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ -#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ -#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ - - -/* Peripheral: GPIOTE */ -/* Description: GPIO tasks and events. */ - -/* Register: GPIOTE_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 31 : Enable interrupt on PORT event. */ -#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on IN[3] event. */ -#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on IN[2] event. */ -#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on IN[1] event. */ -#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on IN[0] event. */ -#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: GPIOTE_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 31 : Disable interrupt on PORT event. */ -#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on IN[3] event. */ -#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on IN[2] event. */ -#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on IN[1] event. */ -#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on IN[0] event. */ -#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: GPIOTE_CONFIG */ -/* Description: Channel configuration registers. */ - -/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ -#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ -#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ - -/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ -#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_None (0x00UL) /*!< No task or event. */ -#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ -#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ -#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ - -/* Bits 12..8 : Pin select. */ -#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ - -/* Bits 1..0 : Mode */ -#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ -#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ -#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ - -/* Register: GPIOTE_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: LPCOMP */ -/* Description: Low power comparator. */ - -/* Register: LPCOMP_SHORTS */ -/* Description: Shortcuts for the LPCOMP. */ - -/* Bit 4 : Shortcut between CROSS event and STOP task. */ -#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between UP event and STOP task. */ -#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DOWN event and STOP task. */ -#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between RADY event and STOP task. */ -#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and SAMPLE task. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: LPCOMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 3 : Enable interrupt on CROSS event. */ -#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on UP event. */ -#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on DOWN event. */ -#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: LPCOMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 3 : Disable interrupt on CROSS event. */ -#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on UP event. */ -#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on DOWN event. */ -#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: LPCOMP_RESULT */ -/* Description: Result of last compare. */ - -/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ -#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ -#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ - -/* Register: LPCOMP_ENABLE */ -/* Description: Enable the LPCOMP. */ - -/* Bits 1..0 : Enable or disable LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ - -/* Register: LPCOMP_PSEL */ -/* Description: Input pin select. */ - -/* Bits 2..0 : Analog input pin select. */ -#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ -#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ - -/* Register: LPCOMP_REFSEL */ -/* Description: Reference select. */ - -/* Bits 2..0 : Reference select. */ -#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ - -/* Register: LPCOMP_EXTREFSEL */ -/* Description: External reference select. */ - -/* Bit 0 : External analog reference pin selection. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ - -/* Register: LPCOMP_ANADETECT */ -/* Description: Analog detect configuration. */ - -/* Bits 1..0 : Analog detect configuration. */ -#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ -#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ -#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ - -/* Register: LPCOMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: MPU */ -/* Description: Memory Protection Unit. */ - -/* Register: MPU_PERR0 */ -/* Description: Configuration of peripherals in mpu regions. */ - -/* Bit 31 : PPI region configuration. */ -#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ -#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ -#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 30 : NVMC region configuration. */ -#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ -#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ -#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 19 : LPCOMP region configuration. */ -#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 18 : QDEC region configuration. */ -#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ -#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ -#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 17 : RTC1 region configuration. */ -#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ -#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ -#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 16 : WDT region configuration. */ -#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ -#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ -#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 15 : CCM and AAR region configuration. */ -#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 14 : ECB region configuration. */ -#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ -#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ -#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 13 : RNG region configuration. */ -#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ -#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ -#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 12 : TEMP region configuration. */ -#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ -#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ -#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 11 : RTC0 region configuration. */ -#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ -#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ -#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 10 : TIMER2 region configuration. */ -#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ -#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ -#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 9 : TIMER1 region configuration. */ -#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ -#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ -#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 8 : TIMER0 region configuration. */ -#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ -#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ -#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 7 : ADC region configuration. */ -#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ -#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ -#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 6 : GPIOTE region configuration. */ -#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 4 : SPI1 and TWI1 region configuration. */ -#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 3 : SPI0 and TWI0 region configuration. */ -#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 2 : UART0 region configuration. */ -#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ -#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ -#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 1 : RADIO region configuration. */ -#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ -#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ -#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 0 : POWER_CLOCK region configuration. */ -#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Register: MPU_PROTENSET0 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 31. */ -#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 30. */ -#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 29. */ -#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 28. */ -#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 27. */ -#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 26. */ -#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 25. */ -#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 24. */ -#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 23. */ -#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 22. */ -#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 21. */ -#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 20. */ -#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 19. */ -#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 18. */ -#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 17. */ -#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 16. */ -#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 15. */ -#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 14. */ -#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 13. */ -#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 12. */ -#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 11. */ -#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 10. */ -#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 9. */ -#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 8. */ -#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 7. */ -#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 6. */ -#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 5. */ -#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 4. */ -#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 3. */ -#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 2. */ -#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 1. */ -#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 0. */ -#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_PROTENSET1 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 63. */ -#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 62. */ -#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 61. */ -#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 60. */ -#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 59. */ -#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 58. */ -#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 57. */ -#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 56. */ -#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 55. */ -#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 54. */ -#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 53. */ -#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 52. */ -#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 51. */ -#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 50. */ -#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 49. */ -#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 48. */ -#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 47. */ -#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 46. */ -#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 45. */ -#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 44. */ -#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 43. */ -#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 42. */ -#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 41. */ -#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 40. */ -#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 39. */ -#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 38. */ -#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 37. */ -#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 36. */ -#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 35. */ -#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 34. */ -#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 33. */ -#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 32. */ -#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_DISABLEINDEBUG */ -/* Description: Disable erase and write protection mechanism in debug mode. */ - -/* Bit 0 : Disable protection mechanism in debug mode. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ - -/* Register: MPU_PROTBLOCKSIZE */ -/* Description: Erase and write protection block size. */ - -/* Bits 1..0 : Erase and write protection block size. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */ - - -/* Peripheral: NVMC */ -/* Description: Non Volatile Memory Controller. */ - -/* Register: NVMC_READY */ -/* Description: Ready flag. */ - -/* Bit 0 : NVMC ready. */ -#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ -#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ -#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ -#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ - -/* Register: NVMC_CONFIG */ -/* Description: Configuration register. */ - -/* Bits 1..0 : Program write enable. */ -#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ -#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ -#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ -#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ -#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ - -/* Register: NVMC_ERASEALL */ -/* Description: Register for erasing all non-volatile user memory. */ - -/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ -#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ - -/* Register: NVMC_ERASEUICR */ -/* Description: Register for start erasing User Information Congfiguration Registers. */ - -/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ -#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ - - -/* Peripheral: POWER */ -/* Description: Power Control. */ - -/* Register: POWER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on POFWARN event. */ -#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: POWER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on POFWARN event. */ -#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: POWER_RESETREAS */ -/* Description: Reset reason. */ - -/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ -#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ -#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ -#define POWER_RESETREAS_DIF_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_DIF_Detected (1UL) /*!< Reset detected. */ - -/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ -#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_LPCOMP_Detected (1UL) /*!< Reset detected. */ - -/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ -#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ -#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ -#define POWER_RESETREAS_OFF_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_OFF_Detected (1UL) /*!< Reset detected. */ - -/* Bit 3 : Reset from CPU lock-up detected. */ -#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_LOCKUP_Detected (1UL) /*!< Reset detected. */ - -/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ -#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ -#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ -#define POWER_RESETREAS_SREQ_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_SREQ_Detected (1UL) /*!< Reset detected. */ - -/* Bit 1 : Reset from watchdog detected. */ -#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ -#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ -#define POWER_RESETREAS_DOG_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_DOG_Detected (1UL) /*!< Reset detected. */ - -/* Bit 0 : Reset from pin-reset detected. */ -#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_RESETPIN_Detected (1UL) /*!< Reset detected. */ - -/* Register: POWER_RAMSTATUS */ -/* Description: Ram status register. */ - -/* Bit 3 : RAM block 3 status. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */ - -/* Bit 2 : RAM block 2 status. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */ - -/* Bit 1 : RAM block 1 status. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */ - -/* Bit 0 : RAM block 0 status. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */ - -/* Register: POWER_SYSTEMOFF */ -/* Description: System off register. */ - -/* Bit 0 : Enter system off mode. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ - -/* Register: POWER_POFCON */ -/* Description: Power failure configuration. */ - -/* Bits 2..1 : Set threshold level. */ -#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ -#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ -#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ -#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ - -/* Bit 0 : Power failure comparator enable. */ -#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ -#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ -#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ -#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ - -/* Register: POWER_GPREGRET */ -/* Description: General purpose retention register. This register is a retained register. */ - -/* Bits 7..0 : General purpose retention register. */ -#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ -#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ - -/* Register: POWER_RAMON */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 1 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ - -/* Bit 16 : RAM block 0 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ - -/* Bit 1 : RAM block 1 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ -#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ - -/* Bit 0 : RAM block 0 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ -#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ - -/* Register: POWER_RESET */ -/* Description: Pin reset functionality configuration register. This register is a retained register. */ - -/* Bit 0 : Enable or disable pin reset in debug interface mode. */ -#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ -#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ -#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ -#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ - -/* Register: POWER_RAMONB */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 3 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ - -/* Bit 16 : RAM block 2 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ - -/* Bit 1 : RAM block 3 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ - -/* Bit 0 : RAM block 2 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ - -/* Register: POWER_DCDCEN */ -/* Description: DCDC converter enable configuration register. */ - -/* Bit 0 : Enable DCDC converter. */ -#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ -#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ - -/* Register: POWER_DCDCFORCE */ -/* Description: DCDC power-up force register. */ - -/* Bit 1 : DCDC power-up force on. */ -#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */ - -/* Bit 0 : DCDC power-up force off. */ -#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */ - - -/* Peripheral: PPI */ -/* Description: PPI controller. */ - -/* Register: PPI_CHEN */ -/* Description: Channel enable. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ -#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ - -/* Register: PPI_CHENSET */ -/* Description: Channel enable set. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ - -/* Register: PPI_CHENCLR */ -/* Description: Channel enable clear. */ - -/* Bit 31 : Disable PPI channel 31. */ -#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 30 : Disable PPI channel 30. */ -#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 29 : Disable PPI channel 29. */ -#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 28 : Disable PPI channel 28. */ -#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 27 : Disable PPI channel 27. */ -#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 26 : Disable PPI channel 26. */ -#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 25 : Disable PPI channel 25. */ -#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 24 : Disable PPI channel 24. */ -#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 23 : Disable PPI channel 23. */ -#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 22 : Disable PPI channel 22. */ -#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 21 : Disable PPI channel 21. */ -#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 20 : Disable PPI channel 20. */ -#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 15 : Disable PPI channel 15. */ -#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 14 : Disable PPI channel 14. */ -#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 13 : Disable PPI channel 13. */ -#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 12 : Disable PPI channel 12. */ -#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 11 : Disable PPI channel 11. */ -#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 10 : Disable PPI channel 10. */ -#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 9 : Disable PPI channel 9. */ -#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 8 : Disable PPI channel 8. */ -#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 7 : Disable PPI channel 7. */ -#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 6 : Disable PPI channel 6. */ -#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 5 : Disable PPI channel 5. */ -#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 4 : Disable PPI channel 4. */ -#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 3 : Disable PPI channel 3. */ -#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 2 : Disable PPI channel 2. */ -#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 1 : Disable PPI channel 1. */ -#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 0 : Disable PPI channel 0. */ -#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ - -/* Register: PPI_CHG */ -/* Description: Channel group configuration. */ - -/* Bit 31 : Include CH31 in channel group. */ -#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ - -/* Bit 30 : Include CH30 in channel group. */ -#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ - -/* Bit 29 : Include CH29 in channel group. */ -#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ - -/* Bit 28 : Include CH28 in channel group. */ -#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ - -/* Bit 27 : Include CH27 in channel group. */ -#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ - -/* Bit 26 : Include CH26 in channel group. */ -#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ - -/* Bit 25 : Include CH25 in channel group. */ -#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ - -/* Bit 24 : Include CH24 in channel group. */ -#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ - -/* Bit 23 : Include CH23 in channel group. */ -#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ - -/* Bit 22 : Include CH22 in channel group. */ -#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ - -/* Bit 21 : Include CH21 in channel group. */ -#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ - -/* Bit 20 : Include CH20 in channel group. */ -#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ - -/* Bit 15 : Include CH15 in channel group. */ -#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ - -/* Bit 14 : Include CH14 in channel group. */ -#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ - -/* Bit 13 : Include CH13 in channel group. */ -#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ - -/* Bit 12 : Include CH12 in channel group. */ -#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ - -/* Bit 11 : Include CH11 in channel group. */ -#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ - -/* Bit 10 : Include CH10 in channel group. */ -#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ - -/* Bit 9 : Include CH9 in channel group. */ -#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ - -/* Bit 8 : Include CH8 in channel group. */ -#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ - -/* Bit 7 : Include CH7 in channel group. */ -#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ - -/* Bit 6 : Include CH6 in channel group. */ -#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ - -/* Bit 5 : Include CH5 in channel group. */ -#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ - -/* Bit 4 : Include CH4 in channel group. */ -#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ - -/* Bit 3 : Include CH3 in channel group. */ -#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ - -/* Bit 2 : Include CH2 in channel group. */ -#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ - -/* Bit 1 : Include CH1 in channel group. */ -#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ - -/* Bit 0 : Include CH0 in channel group. */ -#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ - - -/* Peripheral: PU */ -/* Description: Patch unit. */ - -/* Register: PU_PATCHADDR */ -/* Description: Relative address of patch instructions. */ - -/* Bits 24..0 : Relative address of patch instructions. */ -#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ -#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ - -/* Register: PU_PATCHEN */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ - -/* Register: PU_PATCHENSET */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ - -/* Register: PU_PATCHENCLR */ -/* Description: Patch disable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ - - -/* Peripheral: QDEC */ -/* Description: Rotary decoder. */ - -/* Register: QDEC_SHORTS */ -/* Description: Shortcuts for the QDEC. */ - -/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: QDEC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ACCOF event. */ -#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on REPORTRDY event. */ -#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on SAMPLERDY event. */ -#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: QDEC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ACCOF event. */ -#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on REPORTRDY event. */ -#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on SAMPLERDY event. */ -#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: QDEC_ENABLE */ -/* Description: Enable the QDEC. */ - -/* Bit 0 : Enable or disable QDEC. */ -#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ -#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ - -/* Register: QDEC_LEDPOL */ -/* Description: LED output pin polarity. */ - -/* Bit 0 : LED output pin polarity. */ -#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ -#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ - -/* Register: QDEC_SAMPLEPER */ -/* Description: Sample period. */ - -/* Bits 2..0 : Sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ - -/* Register: QDEC_SAMPLE */ -/* Description: Motion sample value. */ - -/* Bits 31..0 : Last sample taken in compliment to 2. */ -#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ -#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ - -/* Register: QDEC_REPORTPER */ -/* Description: Number of samples to generate an EVENT_REPORTRDY. */ - -/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ -#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ - -/* Register: QDEC_DBFEN */ -/* Description: Enable debouncer input filters. */ - -/* Bit 0 : Enable debounce input filters. */ -#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ -#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ - -/* Register: QDEC_LEDPRE */ -/* Description: Time LED is switched ON before the sample. */ - -/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */ -#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ -#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ - -/* Register: QDEC_ACCDBL */ -/* Description: Accumulated double (error) transitions register. */ - -/* Bits 3..0 : Accumulated double (error) transitions. */ -#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ -#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ - -/* Register: QDEC_ACCDBLREAD */ -/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ - -/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ - -/* Register: QDEC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RADIO */ -/* Description: The radio. */ - -/* Register: RADIO_SHORTS */ -/* Description: Shortcuts for the radio. */ - -/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 5 : Shortcut between END event and START task. */ -#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ -#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ -#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ -#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between END event and DISABLE task. */ -#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and START task. */ -#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ -#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ -#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RADIO_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on BCMATCH event. */ -#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on RSSIEND event. */ -#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on DEVMISS event. */ -#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 5 : Enable interrupt on DEVMATCH event. */ -#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on DISABLED event. */ -#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on END event. */ -#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on PAYLOAD event. */ -#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ADDRESS event. */ -#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RADIO_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on BCMATCH event. */ -#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on RSSIEND event. */ -#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on DEVMISS event. */ -#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 5 : Disable interrupt on DEVMATCH event. */ -#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on DISABLED event. */ -#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on END event. */ -#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on PAYLOAD event. */ -#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ADDRESS event. */ -#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RADIO_CRCSTATUS */ -/* Description: CRC status of received packet. */ - -/* Bit 0 : CRC status of received packet. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ - -/* Register: RADIO_CD */ -/* Description: Carrier detect. */ - -/* Bit 0 : Carrier detect. */ -#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */ -#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */ - -/* Register: RADIO_RXMATCH */ -/* Description: Received address. */ - -/* Bits 2..0 : Logical address in which previous packet was received. */ -#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ -#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ - -/* Register: RADIO_RXCRC */ -/* Description: Received CRC. */ - -/* Bits 23..0 : CRC field of previously received packet. */ -#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ -#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ - -/* Register: RADIO_DAI */ -/* Description: Device address match index. */ - -/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */ -#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ -#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ - -/* Register: RADIO_FREQUENCY */ -/* Description: Frequency. */ - -/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ -#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ - -/* Register: RADIO_TXPOWER */ -/* Description: Output power. */ - -/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ -#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ -#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ - -/* Register: RADIO_MODE */ -/* Description: Data rate and modulation. */ - -/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ -#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ - -/* Register: RADIO_PCNF0 */ -/* Description: Packet configuration 0. */ - -/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ -#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ - -/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ -#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ -#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ - -/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ -#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ - -/* Register: RADIO_PCNF1 */ -/* Description: Packet configuration 1. */ - -/* Bit 25 : Packet whitening enable. */ -#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ -#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ - -/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ -#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ -#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ - -/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ -#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ - -/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ -#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ - -/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ -#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ -#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ - -/* Register: RADIO_PREFIX0 */ -/* Description: Prefixes bytes for logical addresses 0 to 3. */ - -/* Bits 31..24 : Address prefix 3. Decision point: START task. */ -#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ -#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ - -/* Bits 23..16 : Address prefix 2. Decision point: START task. */ -#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ -#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ - -/* Bits 15..8 : Address prefix 1. Decision point: START task. */ -#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ -#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ - -/* Bits 7..0 : Address prefix 0. Decision point: START task. */ -#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ -#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ - -/* Register: RADIO_PREFIX1 */ -/* Description: Prefixes bytes for logical addresses 4 to 7. */ - -/* Bits 31..24 : Address prefix 7. Decision point: START task. */ -#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ -#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ - -/* Bits 23..16 : Address prefix 6. Decision point: START task. */ -#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ -#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ - -/* Bits 15..8 : Address prefix 5. Decision point: START task. */ -#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ -#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ - -/* Bits 7..0 : Address prefix 4. Decision point: START task. */ -#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ -#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ - -/* Register: RADIO_TXADDRESS */ -/* Description: Transmit address select. */ - -/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ -#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ -#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ - -/* Register: RADIO_RXADDRESSES */ -/* Description: Receive address select. */ - -/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ - -/* Register: RADIO_CRCCNF */ -/* Description: CRC configuration. */ - -/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ -#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ -#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ - -/* Bits 1..0 : CRC length. Decision point: START task. */ -#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ -#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ -#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ -#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ -#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ -#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ - -/* Register: RADIO_CRCPOLY */ -/* Description: CRC polynomial. */ - -/* Bits 23..0 : CRC polynomial. Decision point: START task. */ -#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */ -#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ - -/* Register: RADIO_CRCINIT */ -/* Description: CRC initial value. */ - -/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ -#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ -#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ - -/* Register: RADIO_TEST */ -/* Description: Test features enable register. */ - -/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ -#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */ -#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */ - -/* Bit 0 : Constant carrier. Decision point: TXEN task. */ -#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ -#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ - -/* Register: RADIO_TIFS */ -/* Description: Inter Frame Spacing in microseconds. */ - -/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ -#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ -#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ - -/* Register: RADIO_RSSISAMPLE */ -/* Description: RSSI sample. */ - -/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ - -/* Register: RADIO_STATE */ -/* Description: Current radio state. */ - -/* Bits 3..0 : Current radio state. */ -#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ -#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ -#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ -#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ -#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ -#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ -#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ -#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ -#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ -#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ -#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ - -/* Register: RADIO_DATAWHITEIV */ -/* Description: Data whitening initial value. */ - -/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ - -/* Register: RADIO_DAP */ -/* Description: Device address prefix. */ - -/* Bits 15..0 : Device address prefix. */ -#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ -#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ - -/* Register: RADIO_DACNF */ -/* Description: Device address match configuration. */ - -/* Bit 15 : TxAdd for device address 7. */ -#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ -#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ - -/* Bit 14 : TxAdd for device address 6. */ -#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ -#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ - -/* Bit 13 : TxAdd for device address 5. */ -#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ -#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ - -/* Bit 12 : TxAdd for device address 4. */ -#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ -#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ - -/* Bit 11 : TxAdd for device address 3. */ -#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ -#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ - -/* Bit 10 : TxAdd for device address 2. */ -#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ -#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ - -/* Bit 9 : TxAdd for device address 1. */ -#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ -#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ - -/* Bit 8 : TxAdd for device address 0. */ -#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ -#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ - -/* Bit 7 : Enable or disable device address matching using device address 7. */ -#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ -#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ -#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ - -/* Bit 6 : Enable or disable device address matching using device address 6. */ -#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ -#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ -#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ - -/* Bit 5 : Enable or disable device address matching using device address 5. */ -#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ -#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ -#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ - -/* Bit 4 : Enable or disable device address matching using device address 4. */ -#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ -#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ -#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ - -/* Bit 3 : Enable or disable device address matching using device address 3. */ -#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ -#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ -#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ - -/* Bit 2 : Enable or disable device address matching using device address 2. */ -#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ -#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ -#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ - -/* Bit 1 : Enable or disable device address matching using device address 1. */ -#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ -#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ -#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ - -/* Bit 0 : Enable or disable device address matching using device address 0. */ -#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ -#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ -#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ - -/* Register: RADIO_OVERRIDE0 */ -/* Description: Trim value override register 0. */ - -/* Bits 31..0 : Trim value override 0. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ - -/* Register: RADIO_OVERRIDE1 */ -/* Description: Trim value override register 1. */ - -/* Bits 31..0 : Trim value override 1. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ - -/* Register: RADIO_OVERRIDE2 */ -/* Description: Trim value override register 2. */ - -/* Bits 31..0 : Trim value override 2. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ - -/* Register: RADIO_OVERRIDE3 */ -/* Description: Trim value override register 3. */ - -/* Bits 31..0 : Trim value override 3. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ - -/* Register: RADIO_OVERRIDE4 */ -/* Description: Trim value override register 4. */ - -/* Bit 31 : Enable or disable override of default trim values. */ -#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ -#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ - -/* Bits 27..0 : Trim value override 4. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ - -/* Register: RADIO_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RNG */ -/* Description: Random Number Generator. */ - -/* Register: RNG_SHORTS */ -/* Description: Shortcuts for the RNG. */ - -/* Bit 0 : Shortcut between VALRDY event and STOP task. */ -#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RNG_INTENSET */ -/* Description: Interrupt enable set register */ - -/* Bit 0 : Enable interrupt on VALRDY event. */ -#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RNG_INTENCLR */ -/* Description: Interrupt enable clear register */ - -/* Bit 0 : Disable interrupt on VALRDY event. */ -#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RNG_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 0 : Digital error correction enable. */ -#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ -#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ - -/* Register: RNG_VALUE */ -/* Description: RNG random number. */ - -/* Bits 7..0 : Generated random number. */ -#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ -#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ - -/* Register: RNG_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RTC */ -/* Description: Real time counter 0. */ - -/* Register: RTC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] event. */ -#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] event. */ -#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] event. */ -#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] event. */ -#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on OVRFLW event. */ -#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on TICK event. */ -#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RTC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] event. */ -#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] event. */ -#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] event. */ -#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] event. */ -#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on OVRFLW event. */ -#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on TICK event. */ -#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RTC_EVTEN */ -/* Description: Configures event enable routing to PPI for each RTC event. */ - -/* Bit 19 : COMPARE[3] event enable. */ -#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 18 : COMPARE[2] event enable. */ -#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 17 : COMPARE[1] event enable. */ -#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 16 : COMPARE[0] event enable. */ -#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 1 : OVRFLW event enable. */ -#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 0 : TICK event enable. */ -#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ - -/* Register: RTC_EVTENSET */ -/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ - -/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ - -/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ - -/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ - -/* Bit 1 : Enable routing to PPI of OVRFLW event. */ -#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ - -/* Bit 0 : Enable routing to PPI of TICK event. */ -#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ - -/* Register: RTC_EVTENCLR */ -/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 1 : Disable routing to PPI of OVRFLW event. */ -#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 0 : Disable routing to PPI of TICK event. */ -#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ - -/* Register: RTC_COUNTER */ -/* Description: Current COUNTER value. */ - -/* Bits 23..0 : Counter value. */ -#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ -#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ - -/* Register: RTC_PRESCALER */ -/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ - -/* Bits 11..0 : RTC PRESCALER value. */ -#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: RTC_CC */ -/* Description: Capture/compare registers. */ - -/* Bits 23..0 : Compare value. */ -#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ -#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ - -/* Register: RTC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPI */ -/* Description: SPI master 0. */ - -/* Register: SPI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on READY event. */ -#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPI_ENABLE */ -/* Description: Enable SPI. */ - -/* Bits 2..0 : Enable or disable SPI. */ -#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ -#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ - -/* Register: SPI_RXD */ -/* Description: RX data. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: SPI_TXD */ -/* Description: TX data. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: SPI_FREQUENCY */ -/* Description: SPI frequency */ - -/* Bits 31..0 : SPI data rate. */ -#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ -#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ - -/* Register: SPI_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIM */ -/* Description: SPI master with easyDMA 1. */ - -/* Register: SPIM_SHORTS */ -/* Description: Shortcuts for SPIM. */ - -/* Bit 17 : Shortcut between END event and START task. */ -#define SPIM_SHORTS_END_START_Pos (17UL) /*!< Position of END_START field. */ -#define SPIM_SHORTS_END_START_Msk (0x1UL << SPIM_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define SPIM_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIM_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on STARTED event. */ -#define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */ -#define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */ -#define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 8 : Enable interrupt on ENDTX event. */ -#define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ -#define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ -#define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on END event. */ -#define SPIM_INTENSET_END_Pos (6UL) /*!< Position of END field. */ -#define SPIM_INTENSET_END_Msk (0x1UL << SPIM_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIM_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on ENDRX event. */ -#define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ -#define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ -#define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on STARTED event. */ -#define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */ -#define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */ -#define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 8 : Disable interrupt on ENDTX event. */ -#define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ -#define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ -#define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on END event. */ -#define SPIM_INTENCLR_END_Pos (6UL) /*!< Position of END field. */ -#define SPIM_INTENCLR_END_Msk (0x1UL << SPIM_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIM_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on ENDRX event. */ -#define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ -#define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ -#define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIM_ENABLE */ -/* Description: Enable SPIM. */ - -/* Bits 3..0 : Enable or disable SPIM. */ -#define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIM_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIM. */ -#define SPIM_ENABLE_ENABLE_Enabled (0x07UL) /*!< Enable SPIM. */ - -/* Register: SPIM_FREQUENCY */ -/* Description: SPI frequency. */ - -/* Bits 31..0 : SPI master data rate. */ -#define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps. */ - -/* Register: SPIM_RXD_PTR */ -/* Description: Data pointer. */ - -/* Bits 31..0 : Data pointer. */ -#define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ -#define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ - -/* Register: SPIM_RXD_MAXCNT */ -/* Description: Maximum number of buffer bytes to receive. */ - -/* Bits 7..0 : Maximum number of buffer bytes to receive. */ -#define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ -#define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ - -/* Register: SPIM_RXD_AMOUNT */ -/* Description: Number of bytes received in the last transaction. */ - -/* Bits 7..0 : Number of bytes received in the last transaction. */ -#define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ -#define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ - -/* Register: SPIM_TXD_PTR */ -/* Description: Data pointer. */ - -/* Bits 31..0 : Data pointer. */ -#define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ -#define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ - -/* Register: SPIM_TXD_MAXCNT */ -/* Description: Maximum number of buffer bytes to send. */ - -/* Bits 7..0 : Maximum number of buffer bytes to send. */ -#define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ -#define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ - -/* Register: SPIM_TXD_AMOUNT */ -/* Description: Number of bytes sent in the last transaction. */ - -/* Bits 7..0 : Number of bytes sent in the last transaction. */ -#define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ -#define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ - -/* Register: SPIM_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIM_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIM_POWER_POWER_Msk (0x1UL << SPIM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIS */ -/* Description: SPI slave 1. */ - -/* Register: SPIS_SHORTS */ -/* Description: Shortcuts for SPIS. */ - -/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ -#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIS_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on ACQUIRED event. */ -#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on END event. */ -#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIS_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on ACQUIRED event. */ -#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on END event. */ -#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIS_SEMSTAT */ -/* Description: Semaphore status. */ - -/* Bits 1..0 : Semaphore status. */ -#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ -#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ -#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ -#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ - -/* Register: SPIS_STATUS */ -/* Description: Status from last transaction. */ - -/* Bit 1 : RX buffer overflow detected, and prevented. */ -#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ - -/* Bit 0 : TX buffer overread detected, and prevented. */ -#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ - -/* Register: SPIS_ENABLE */ -/* Description: Enable SPIS. */ - -/* Bits 2..0 : Enable or disable SPIS. */ -#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ -#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ - -/* Register: SPIS_MAXRX */ -/* Description: Maximum number of bytes in the receive buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ -#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ -#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ - -/* Register: SPIS_AMOUNTRX */ -/* Description: Number of bytes received in last granted transaction. */ - -/* Bits 7..0 : Number of bytes received in last granted transaction. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ - -/* Register: SPIS_MAXTX */ -/* Description: Maximum number of bytes in the transmit buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ -#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ -#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ - -/* Register: SPIS_AMOUNTTX */ -/* Description: Number of bytes transmitted in last granted transaction. */ - -/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ - -/* Register: SPIS_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIS_DEF */ -/* Description: Default character. */ - -/* Bits 7..0 : Default character. */ -#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ -#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ - -/* Register: SPIS_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIS_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TEMP */ -/* Description: Temperature Sensor. */ - -/* Register: TEMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on DATARDY event. */ -#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TEMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on DATARDY event. */ -#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TEMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TIMER */ -/* Description: Timer 0. */ - -/* Register: TIMER_SHORTS */ -/* Description: Shortcuts for Timer. */ - -/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TIMER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] */ -#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] */ -#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] */ -#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] */ -#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TIMER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] */ -#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] */ -#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] */ -#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] */ -#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TIMER_MODE */ -/* Description: Timer Mode selection. */ - -/* Bit 0 : Select Normal or Counter mode. */ -#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ -#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ - -/* Register: TIMER_BITMODE */ -/* Description: Sets timer behaviour. */ - -/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ -#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ - -/* Register: TIMER_PRESCALER */ -/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ - -/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ -#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: TIMER_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TWI */ -/* Description: Two-wire interface master 0. */ - -/* Register: TWI_SHORTS */ -/* Description: Shortcuts for TWI. */ - -/* Bit 1 : Shortcut between BB event and the STOP task. */ -#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ -#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TWI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 18 : Enable interrupt on SUSPENDED event. */ -#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 14 : Enable interrupt on BB event. */ -#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXDSENT event. */ -#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TWI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 18 : Disable interrupt on SUSPENDED event. */ -#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 14 : Disable interrupt on BB event. */ -#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXDSENT event. */ -#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXDREADY event. */ -#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TWI_ERRORSRC */ -/* Description: Two-wire error source. Write error field to 1 to clear error. */ - -/* Bit 2 : NACK received after sending a data byte. */ -#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ -#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ -#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : NACK received after sending the address. */ -#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ -#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ -#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : Byte received in RXD register before read of the last received byte (data loss). */ -#define TWI_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define TWI_ERRORSRC_OVERRUN_Msk (0x1UL << TWI_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define TWI_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: TWI_ENABLE */ -/* Description: Enable two-wire master. */ - -/* Bits 2..0 : Enable or disable W2M */ -#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ -#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ - -/* Register: TWI_RXD */ -/* Description: RX data register. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: TWI_TXD */ -/* Description: TX data register. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: TWI_FREQUENCY */ -/* Description: Two-wire frequency. */ - -/* Bits 31..0 : Two-wire master clock frequency. */ -#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ - -/* Register: TWI_ADDRESS */ -/* Description: Address used in the two-wire transfer. */ - -/* Bits 6..0 : Two-wire address. */ -#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ -#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ - -/* Register: TWI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UART */ -/* Description: Universal Asynchronous Receiver/Transmitter. */ - -/* Register: UART_SHORTS */ -/* Description: Shortcuts for UART. */ - -/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ -#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ -#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: UART_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 17 : Enable interrupt on RXTO event. */ -#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXRDY event. */ -#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on RXRDY event. */ -#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on NCTS event. */ -#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on CTS event. */ -#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: UART_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 17 : Disable interrupt on RXTO event. */ -#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXRDY event. */ -#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXRDY event. */ -#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on NCTS event. */ -#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on CTS event. */ -#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: UART_ERRORSRC */ -/* Description: Error source. Write error field to 1 to clear error. */ - -/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ -#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ -#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ -#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ -#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ -#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ -#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: UART_ENABLE */ -/* Description: Enable UART and acquire IOs. */ - -/* Bits 2..0 : Enable or disable UART and acquire IOs. */ -#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ -#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ - -/* Register: UART_RXD */ -/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working. */ - -/* Bits 7..0 : RX data from previous transfer. Double buffered. */ -#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: UART_TXD */ -/* Description: TXD register. */ - -/* Bits 7..0 : TX data for transfer. */ -#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: UART_BAUDRATE */ -/* Description: UART Baudrate. */ - -/* Bits 31..0 : UART baudrate. */ -#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBED000UL) /*!< 921600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ - -/* Register: UART_CONFIG */ -/* Description: Configuration of parity and hardware flow control register. */ - -/* Bits 3..1 : Include parity bit. */ -#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ -#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ - -/* Bit 0 : Hardware flow control. */ -#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ -#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ -#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ -#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ - -/* Register: UART_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UICR */ -/* Description: User Information Configuration. */ - -/* Register: UICR_RBPCONF */ -/* Description: Readback protection configuration. */ - -/* Bits 15..8 : Readback protect all code in the device. */ -#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ -#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ -#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ -#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ - -/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ -#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ -#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ -#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ -#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ - -/* Register: UICR_XTALFREQ */ -/* Description: Reset value for CLOCK XTALFREQ register. */ - -/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ -#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ -#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ - -/* Register: UICR_FWID */ -/* Description: Firmware ID. */ - -/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ -#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ -#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ - - -/* Peripheral: WDT */ -/* Description: Watchdog Timer. */ - -/* Register: WDT_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on TIMEOUT event. */ -#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: WDT_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on TIMEOUT event. */ -#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: WDT_RUNSTATUS */ -/* Description: Watchdog running status. */ - -/* Bit 0 : Watchdog running status. */ -#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ -#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ - -/* Register: WDT_REQSTATUS */ -/* Description: Request status. */ - -/* Bit 7 : Request status for RR[7]. */ -#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ - -/* Bit 6 : Request status for RR[6]. */ -#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ - -/* Bit 5 : Request status for RR[5]. */ -#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ - -/* Bit 4 : Request status for RR[4]. */ -#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ - -/* Bit 3 : Request status for RR[3]. */ -#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ - -/* Bit 2 : Request status for RR[2]. */ -#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ - -/* Bit 1 : Request status for RR[1]. */ -#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ - -/* Bit 0 : Request status for RR[0]. */ -#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ - -/* Register: WDT_RREN */ -/* Description: Reload request enable. */ - -/* Bit 7 : Enable or disable RR[7] register. */ -#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ -#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ - -/* Bit 6 : Enable or disable RR[6] register. */ -#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ -#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ - -/* Bit 5 : Enable or disable RR[5] register. */ -#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ -#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ - -/* Bit 4 : Enable or disable RR[4] register. */ -#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ -#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ - -/* Bit 3 : Enable or disable RR[3] register. */ -#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ -#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ - -/* Bit 2 : Enable or disable RR[2] register. */ -#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ -#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ - -/* Bit 1 : Enable or disable RR[1] register. */ -#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ -#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ - -/* Bit 0 : Enable or disable RR[0] register. */ -#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ -#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ - -/* Register: WDT_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ -#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ -#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ - -/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ -#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ -#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ - -/* Register: WDT_RR */ -/* Description: Reload requests registers. */ - -/* Bits 31..0 : Reload register. */ -#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ -#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ -#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ - -/* Register: WDT_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/*lint --flb "Leave library region" */ -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h deleted file mode 100644 index 2a672db..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/nrf51_delay.h - * @brief NRF51822 Delay routines - * - * @{ - */ - -#ifndef _NRF_DELAY_H -#define _NRF_DELAY_H - -inline static void nrf_delay_us(uint32_t volatile number_of_us) __attribute__((always_inline)); -inline static void nrf_delay_us(uint32_t volatile number_of_us) -{ -register uint32_t delay asm ("r0") = number_of_us; -__asm volatile ( -".syntax unified\n" - "1:\n" - " SUBS %0, %0, #1\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " BNE 1b\n" - ".syntax divided\n" - : "+r" (delay)); -} -#endif //__NRF_DELAY_H diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk deleted file mode 100644 index b937e39..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk +++ /dev/null @@ -1,61 +0,0 @@ -ifeq ($(USE_SMART_BUILD),yes) -HALCONF := $(strip $(shell cat halconf.h halconf_community.h 2>/dev/null | egrep -e "define")) - -# List of all the NRF51x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_st_lld.c - -ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c -endif -ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c -endif -ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c -endif -ifneq ($(findstring HAL_USE_EXT TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c -endif -ifneq ($(findstring HAL_USE_I2C TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c -endif -ifneq ($(findstring HAL_USE_ADC TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c -endif -ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c -endif -ifneq ($(findstring HAL_USE_WDG TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c -endif -ifneq ($(findstring HAL_USE_RNG TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c -endif -ifneq ($(findstring HAL_USE_PWM TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c -endif -else -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c -endif - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822 - - diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c deleted file mode 100644 index 601deca..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file STM32/CRCv1/crc_lld.c - * @brief STM32 CRC subsystem low level driver source. - * - * @addtogroup CRC - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_CRC == TRUE) || defined(__DOXYGEN__) - -/** - * Allow CRC Software override for ST drivers. Some ST CRC implimentations - * have limited capabilities. - */ -#if CRCSW_USE_CRC1 != TRUE - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * @brief CRC default configuration. - */ -static const CRCConfig default_config = { - .poly_size = 32, - .poly = 0x04C11DB7, - .initial_val = 0xFFFFFFFF, - .final_val = 0xFFFFFFFF, - .reflect_data = 1, - .reflect_remainder = 1 -}; - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief CRC1 driver identifier.*/ -#if STM32_CRC_USE_CRC1 || defined(__DOXYGEN__) -CRCDriver CRCD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -void _crc_lld_calc_byte(CRCDriver *crcp, uint8_t data) { - __IO uint8_t *crc8 = (__IO uint8_t*)&(crcp->crc->DR); - *crc8 = data; -} - -/* - * @brief Returns calculated CRC from last reset - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] data data to be added to crc - * - * @notapi - */ -void _crc_lld_calc_halfword(CRCDriver *crcp, uint16_t data) { - __IO uint16_t *crc16 = (__IO uint16_t*)&(crcp->crc->DR); - *crc16 = data; -} - -/* - * @brief Returns calculated CRC from last reset - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] data data to be added to crc - * - * @notapi - */ -void _crc_lld_calc_word(CRCDriver *crcp, uint32_t data) { - crcp->crc->DR = data; -} - - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/** - * @brief Shared end-of-rx service routine. - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] flags pre-shifted content of the ISR register - */ -#if CRC_USE_DMA == TRUE -static void crc_lld_serve_interrupt(CRCDriver *crcp, uint32_t flags) { - - /* DMA errors handling.*/ -#if defined(STM32_CRC_DMA_ERROR_HOOK) - if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) { - STM32_CRC_DMA_ERROR_HOOK(crcp); - } -#else - (void)flags; -#endif - - /* Stop everything.*/ - dmaStreamDisable(crcp->dma); - - /* Portable CRC ISR code defined in the high level driver, note, it is - a macro.*/ - _crc_isr_code(crcp, crcp->crc->DR ^ crcp->config->final_val); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level CRC driver initialization. - * - * @notapi - */ -void crc_lld_init(void) { - crcObjectInit(&CRCD1); - CRCD1.crc = CRC; -#if CRC_USE_DMA == TRUE - CRCD1.dma = STM32_CRC_CRC1_DMA_STREAM; -#endif -} - -/** - * @brief Configures and activates the CRC peripheral. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -void crc_lld_start(CRCDriver *crcp) { - if (crcp->config == NULL) - crcp->config = &default_config; - - rccEnableCRC(FALSE); - -#if STM32_CRC_PROGRAMMABLE == TRUE - crcp->crc->INIT = crcp->config->initial_val; - crcp->crc->POL = crcp->config->poly; - - crcp->crc->CR = 0; - switch(crcp->config->poly_size) { - case 32: - break; - case 16: - crcp->crc->CR |= CRC_CR_POLYSIZE_0; - break; - case 8: - crcp->crc->CR |= CRC_CR_POLYSIZE_1; - break; - case 7: - crcp->crc->CR |= CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0; - break; - default: - osalDbgAssert(false, "hardware doesn't support polynomial size"); - break; - }; - if (crcp->config->reflect_data) { - crcp->crc->CR |= CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0; - } - if (crcp->config->reflect_remainder) { - crcp->crc->CR |= CRC_CR_REV_OUT; - } -#else - osalDbgAssert(crcp->config->initial_val != default_config.initial_val, - "hardware doesn't support programmable initial value"); - osalDbgAssert(crcp->config->poly_size != default_config.poly_size, - "hardware doesn't support programmable polynomial size"); - osalDbgAssert(crcp->config->poly != default_config.poly, - "hardware doesn't support programmable polynomial"); - osalDbgAssert(crcp->config->reflect_data != default_config.reflect_data, - "hardware doesn't support reflect of input data"); - osalDbgAssert(crcp->config->reflect_remainder != default_config.reflect_remainder, - "hardware doesn't support reflect of output remainder"); -#endif - -#if CRC_USE_DMA == TRUE -#if STM32_CRC_PROGRAMMABLE == TRUE - crcp->dmamode = STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_PINC | - STM32_DMA_CR_MSIZE_BYTE | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE | - STM32_DMA_CR_PL(STM32_CRC_CRC1_DMA_PRIORITY); -#else - crcp->dmamode = STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_PINC | - STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_PSIZE_WORD | - STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE | - STM32_DMA_CR_PL(STM32_CRC_CRC1_DMA_PRIORITY); -#endif - { - bool b; - b = dmaStreamAllocate(crcp->dma, - STM32_CRC_CRC1_DMA_IRQ_PRIORITY, - (stm32_dmaisr_t)crc_lld_serve_interrupt, - (void *)crcp); - osalDbgAssert(!b, "stream already allocated"); - } -#endif -} - - -/** - * @brief Deactivates the CRC peripheral. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -void crc_lld_stop(CRCDriver *crcp) { -#if CRC_USE_DMA == TRUE - dmaStreamRelease(crcp->dma); -#else - (void)crcp; -#endif - rccDisableCRC(FALSE); -} - -/** - * @brief Resets current CRC calculation. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -void crc_lld_reset(CRCDriver *crcp) { - crcp->crc->CR |= CRC_CR_RESET; -} - -/** - * @brief Returns calculated CRC from last reset - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] n size of buf in bytes - * @param[in] buf @p buffer location - * - * @notapi - */ -uint32_t crc_lld_calc(CRCDriver *crcp, size_t n, const void *buf) { -#if CRC_USE_DMA == TRUE - crc_lld_start_calc(crcp, n, buf); - (void) osalThreadSuspendS(&crcp->thread); -#else - /** - * BUG: Only peform byte writes to DR reg if reflect_data is disabled. - * The STM32 hardware unit seems to incorrectly calculate CRCs when all - * of the following is true: reflect_data(rev_in) is 0, dma is disable, and - * you are writing more than a byte into the DR register. - */ - if (crcp->config->reflect_data != 0) { - while(n > 3) { - _crc_lld_calc_word(crcp, *(uint32_t*)buf); - buf+=4; - n-=4; - } - } - -#if STM32_CRC_PROGRAMMABLE == TRUE - /* Programmable CRC units allow variable register width accesses.*/ - - /** - * BUG: Only peform byte writes to DR reg if reflect_data is disabled. - * The STM32 hardware unit seems to incorrectly calculate CRCs when all - * of the following is true: reflect_data(rev_in) is 0, dma is disable, and - * you are writing more than a byte into the DR register. - */ - if (crcp->config->reflect_data != 0) { - while(n > 1) { - _crc_lld_calc_halfword(crcp, *(uint16_t*)buf); - buf+=2; - n-=2; - } - } - - while(n > 0) { - _crc_lld_calc_byte(crcp, *(uint8_t*)buf); - buf++; - n--; - } -#else - osalDbgAssert(n != 0, "STM32 CRC Unit only supports WORD accesses"); -#endif - -#endif - return crcp->crc->DR ^ crcp->config->final_val; -} - -#if CRC_USE_DMA == TRUE -void crc_lld_start_calc(CRCDriver *crcp, size_t n, const void *buf) { - dmaStreamSetPeripheral(crcp->dma, buf); - dmaStreamSetMemory0(crcp->dma, &crcp->crc->DR); -#if STM32_CRC_PROGRAMMABLE == TRUE - dmaStreamSetTransactionSize(crcp->dma, n); -#else - dmaStreamSetTransactionSize(crcp->dma, (n / 4)); -#endif - dmaStreamSetMode(crcp->dma, crcp->dmamode); - - dmaStreamEnable(crcp->dma); -} -#endif - -#endif /* CRCSW_USE_CRC1 */ - -#endif /* HAL_USE_CRC */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h deleted file mode 100644 index ecdaf81..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file STM32/CRCv1/crc_lld.h - * @brief STM32 CRC subsystem low level driver header. - * - * @addtogroup CRC - * @{ - */ - -#ifndef _CRC_LLD_H_ -#define _CRC_LLD_H_ - -#if (HAL_USE_CRC == TRUE) || defined(__DOXYGEN__) - -/* - * This error check must occur outsite of CRCSW_USE_CRC1 to check if - * two LLD drivers are enabled at the same time - */ -#if STM32_CRC_USE_CRC1 == TRUE && \ - CRCSW_USE_CRC1 == TRUE -#error "Software CRC can't be enable with STM32_CRC_USE_CRC1" -#endif - -/** - * Allow CRC Software override for ST drivers. Some ST CRC implimentations - * have limited capabilities. - */ -#if CRCSW_USE_CRC1 != TRUE - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief CRC1 driver enable switch. - * @details If set to @p TRUE the support for CRC1 is included. - * @note The default is @p FALSE. - */ -#if !defined(STM32_CRC_USE_CRC1) || defined(__DOXYGEN__) -#define STM32_CRC_USE_CRC1 FALSE -#endif - -/** - * @brief CRC1 DMA priority (0..3|lowest..highest). - * @note The priority level is for CRC DMA stream. - */ -#if !defined(STM32_CRC_CRC1_DMA_PRIORITY) || defined(__DOXYGEN__) -#define STM32_CRC_CRC1_DMA_PRIORITY 2 -#endif - -/** - * @brief CRC1 DMA interrupt priority level setting. - */ -#if !defined(STM32_CRC_CRC1_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 -#endif - -/** - * @brief CRC1 DMA STREAM to use when performing CRC calculation. - */ -#if !defined(STM32_CRC_CRC1_DMA_STREAM) || defined(__DOXYGEN__) -#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 -#endif - -/** - * @brief CRC DMA error hook. - */ -#if !defined(STM32_CRC_DMA_ERROR_HOOK) || defined(__DOXYGEN__) -#define STM32_CRC_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if STM32_CRC_USE_CRC1 && !STM32_HAS_CRC -#error "Hardware CRC not present in the selected device" -#error "Use CRCSW_USE_CRC1 for software implementation" -#endif - -#if CRC_USE_DMA -#if STM32_CRC_USE_CRC1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_CRC_CRC1_DMA_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to CRC1" -#endif - -#if STM32_CRC_USE_CRC1 && \ - !STM32_DMA_IS_VALID_PRIORITY(STM32_CRC_CRC1_DMA_PRIORITY) -#error "Invalid DMA priority assigned to CRC1" -#endif - -#if !defined(STM32_DMA_REQUIRED) -#define STM32_DMA_REQUIRED -#endif -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an CRC driver. - */ -typedef struct CRCDriver CRCDriver; - -/** - * @brief CRC notification callback type - * - * @param[in] crcp pointer to the @ CRCDriver object triggering the - * callback - */ -typedef void (*crccallback_t)(CRCDriver *crcp, uint32_t crc); - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /** - * @brief The size of polynomial to be used for CRC. - */ - uint32_t poly_size; - /** - * @brief The coefficients of the polynomial to be used for CRC. - */ - uint32_t poly; - /** - * @brief The inital value - */ - uint32_t initial_val; - /** - * @brief The final XOR value - */ - uint32_t final_val; - /** - * @brief Reflect bit order data going into CRC - */ - bool reflect_data; - /** - * @brief Reflect bit order of final remainder - */ - bool reflect_remainder; - /* End of the mandatory fields.*/ - /** - * @brief Operation complete callback or @p NULL - */ - crccallback_t end_cb; -} CRCConfig; - - -/** - * @brief Structure representing an CRC driver. - */ -struct CRCDriver { - /** - * @brief Driver state. - */ - crcstate_t state; - /** - * @brief Current configuration data. - */ - const CRCConfig *config; -#if CRC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif /* CRC_USE_MUTUAL_EXCLUSION */ -#if defined(CRC_DRIVER_EXT_FIELDS) - CRC_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the CRCx registers block. - */ - CRC_TypeDef *crc; - -#if CRC_USE_DMA == TRUE - /** - * @brief Waiting thread. - */ - thread_reference_t thread; - /** - * @brief CRC DMA stream - */ - const stm32_dma_stream_t *dma; - /** - * @brief DMA mode bit mask. - */ - uint32_t dmamode; -#endif -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_CRC_USE_CRC1 && !defined(__DOXYGEN__) -extern CRCDriver CRCD1; -#endif /* STM32_CRC_USE_CRC1 */ - -#ifdef __cplusplus -extern "C" { -#endif - void crc_lld_init(void); - void crc_lld_start(CRCDriver *crcp); - void crc_lld_stop(CRCDriver *crcp); - void crc_lld_reset(CRCDriver *crcp); - uint32_t crc_lld_calc(CRCDriver *crcp, size_t n, const void *buf); -#if CRC_USE_DMA - void crc_lld_start_calc(CRCDriver *crcp, size_t n, const void *buf); -#endif -#ifdef __cplusplus -} -#endif - -#endif /* CRCSW_USE_CRC1 */ - -#endif /* HAL_USE_CRC */ - -#endif /* _CRC_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c deleted file mode 100644 index aba029f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c +++ /dev/null @@ -1,3130 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file stm32_dma2d.c - * @brief DMA2D/Chrom-ART driver. - */ - -#include "ch.h" -#include "hal.h" - -#include "hal_stm32_dma2d.h" - -#if STM32_DMA2D_USE_DMA2D || defined(__DOXYGEN__) - -/* Ignore annoying warning messages for actually safe code.*/ -#if defined(__GNUC__) && !defined(__DOXYGEN__) -#pragma GCC diagnostic ignored "-Wtype-limits" -#endif - -/** - * @addtogroup dma2d - * @{ - */ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief DMA2DD1 driver identifier.*/ -DMA2DDriver DMA2DD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Bits per pixel lookup table. - */ -static const uint8_t dma2d_bpp[DMA2D_MAX_PIXFMT_ID + 1] = { - 32, /* DMA2D_FMT_ARGB8888 */ - 24, /* DMA2D_FMT_RGB888 */ - 16, /* DMA2D_FMT_RGB565 */ - 16, /* DMA2D_FMT_ARGB1555 */ - 16, /* DMA2D_FMT_ARGB4444 */ - 8, /* DMA2D_FMT_L8 */ - 8, /* DMA2D_FMT_AL44 */ - 16, /* DMA2D_FMT_AL88 */ - 4, /* DMA2D_FMT_L4 */ - 8, /* DMA2D_FMT_A8 */ - 4 /* DMA2D_FMT_A4 */ -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @name DMA2D interrupt handlers - * @{ - */ - -/** - * @brief DMA2D global interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_DMA2D_HANDLER) { - - DMA2DDriver *const dma2dp = &DMA2DD1; - bool job_done = false; - thread_t *tp = NULL; - - OSAL_IRQ_PROLOGUE(); - - /* Handle Configuration Error ISR.*/ - if ((DMA2D->ISR & DMA2D_ISR_CEIF) && (DMA2D->CR & DMA2D_CR_CEIE)) { - if (dma2dp->config->cfgerr_isr != NULL) - dma2dp->config->cfgerr_isr(dma2dp); - job_done = true; - DMA2D->IFCR |= DMA2D_IFSR_CCEIF; - } - - /* Handle CLUT (Palette) Transfer Complete ISR.*/ - if ((DMA2D->ISR & DMA2D_ISR_CTCIF) && (DMA2D->CR & DMA2D_CR_CTCIE)) { - if (dma2dp->config->paltrfdone_isr != NULL) - dma2dp->config->paltrfdone_isr(dma2dp); - job_done = true; - DMA2D->IFCR |= DMA2D_IFSR_CCTCIF; - } - - /* Handle CLUT (Palette) Access Error ISR.*/ - if ((DMA2D->ISR & DMA2D_ISR_CAEIF) && (DMA2D->CR & DMA2D_CR_CAEIE)) { - if (dma2dp->config->palacserr_isr != NULL) - dma2dp->config->palacserr_isr(dma2dp); - job_done = true; - DMA2D->IFCR |= DMA2D_IFSR_CCAEIF; - } - - /* Handle Transfer Watermark ISR.*/ - if ((DMA2D->ISR & DMA2D_ISR_TWIF) && (DMA2D->CR & DMA2D_CR_TWIE)) { - if (dma2dp->config->trfwmark_isr != NULL) - dma2dp->config->trfwmark_isr(dma2dp); - DMA2D->IFCR |= DMA2D_IFSR_CTWIF; - } - - /* Handle Transfer Complete ISR.*/ - if ((DMA2D->ISR & DMA2D_ISR_TCIF) && (DMA2D->CR & DMA2D_CR_TCIE)) { - if (dma2dp->config->trfdone_isr != NULL) - dma2dp->config->trfdone_isr(dma2dp); - job_done = true; - DMA2D->IFCR |= DMA2D_IFSR_CTCIF; - } - - /* Handle Transfer Error ISR.*/ - if ((DMA2D->ISR & DMA2D_ISR_TEIF) && (DMA2D->CR & DMA2D_CR_TEIE)) { - if (dma2dp->config->trferr_isr != NULL) - dma2dp->config->trferr_isr(dma2dp); - job_done = true; - DMA2D->IFCR |= DMA2D_IFSR_CTEIF; - } - - if (job_done) { - osalSysLockFromISR(); - osalDbgAssert(dma2dp->state == DMA2D_ACTIVE, "invalid state"); - - #if DMA2D_USE_WAIT - /* Wake the waiting thread up.*/ - if (dma2dp->thread != NULL) { - tp = dma2dp->thread; - dma2dp->thread = NULL; - tp->u.rdymsg = MSG_OK; - chSchReadyI(tp); - } - #endif /* DMA2D_USE_WAIT */ - - dma2dp->state = DMA2D_READY; - osalSysUnlockFromISR(); - } - - OSAL_IRQ_EPILOGUE(); -} - -/** @} */ - -/** - * @name DMA2D driver-specific methods - * @{ - */ - -/** - * @brief DMA2D Driver initialization. - * @details Initializes the DMA2D subsystem and chosen drivers. Should be - * called at board initialization. - * - * @init - */ -void dma2dInit(void) { - - /* Reset the DMA2D hardware module.*/ - rccResetDMA2D(); - - /* Enable the DMA2D clock.*/ - rccEnableDMA2D(false); - - /* Driver struct initialization.*/ - dma2dObjectInit(&DMA2DD1); - DMA2DD1.state = DMA2D_STOP; -} - -/** - * @brief Initializes the standard part of a @p DMA2DDriver structure. - * - * @param[out] dma2dp pointer to the @p DMA2DDriver object - * - * @init - */ -void dma2dObjectInit(DMA2DDriver *dma2dp) { - - osalDbgCheck(dma2dp == &DMA2DD1); - - dma2dp->state = DMA2D_UNINIT; - dma2dp->config = NULL; -#if DMA2D_USE_WAIT - dma2dp->thread = NULL; -#endif /* DMA2D_USE_WAIT */ -#if (TRUE == DMA2D_USE_MUTUAL_EXCLUSION) -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxObjectInit(&dma2dp->lock); -#else - chSemObjectInit(&dma2dp->lock, 1); -#endif -#endif /* (TRUE == DMA2D_USE_MUTUAL_EXCLUSION) */ -} - -/** - * @brief Get the driver state. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @retun driver state - * - * @iclass - */ -dma2d_state_t dma2dGetStateI(DMA2DDriver *dma2dp) { - - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheckClassI(); - - return dma2dp->state; -} - -/** - * @brief Get the driver state. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @retun driver state - * - * @api - */ -dma2d_state_t dma2dGetState(DMA2DDriver *dma2dp) { - - dma2d_state_t state; - chSysLock(); - state = dma2dGetStateI(dma2dp); - chSysUnlock(); - return state; -} - -/** - * @brief Configures and activates the DMA2D peripheral. - * @pre DMA2D is stopped. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] configp pointer to the @p DMA2DConfig object - * - * @api - */ -void dma2dStart(DMA2DDriver *dma2dp, const DMA2DConfig *configp) { - - chSysLock(); - - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(configp != NULL); - osalDbgAssert(dma2dp->state == DMA2D_STOP, "invalid state"); - - dma2dp->config = configp; - - /* Turn off the controller and its interrupts.*/ - DMA2D->CR = 0; - - /* Enable interrupts, except Line Watermark.*/ - nvicEnableVector(STM32_DMA2D_NUMBER, STM32_DMA2D_IRQ_PRIORITY); - - DMA2D->CR = (DMA2D_CR_CEIE | DMA2D_CR_CTCIE | DMA2D_CR_CAEIE | - DMA2D_CR_TCIE | DMA2D_CR_TEIE); - - dma2dp->state = DMA2D_READY; - chSysUnlock(); -} - -/** - * @brief Deactivates the DMA2D peripheral. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dStop(DMA2DDriver *dma2dp) { - - chSysLock(); - - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "invalid state"); -#if DMA2D_USE_WAIT - osalDbgAssert(dma2dp->thread == NULL, "still waiting"); -#endif /* DMA2D_USE_WAIT */ - - dma2dp->state = DMA2D_STOP; - chSysUnlock(); -} - -#if DMA2D_USE_MUTUAL_EXCLUSION - -/** - * @brief Gains exclusive access to the DMA2D module. - * @details This function tries to gain ownership to the DMA2D module, if the - * module is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p DMA2D_USE_MUTUAL_EXCLUSION must be enabled. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @sclass - */ -void dma2dAcquireBusS(DMA2DDriver *dma2dp) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxLockS(&dma2dp->lock); -#else - chSemWaitS(&dma2dp->lock); -#endif -} - -/** - * @brief Gains exclusive access to the DMA2D module. - * @details This function tries to gain ownership to the DMA2D module, if the - * module is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p DMA2D_USE_MUTUAL_EXCLUSION must be enabled. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dAcquireBus(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dAcquireBusS(dma2dp); - chSysUnlock(); -} - -/** - * @brief Releases exclusive access to the DMA2D module. - * @pre In order to use this function the option - * @p DMA2D_USE_MUTUAL_EXCLUSION must be enabled. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @sclass - */ -void dma2dReleaseBusS(DMA2DDriver *dma2dp) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxUnlockS(&dma2dp->lock); -#else - chSemSignalI(&dma2dp->lock); -#endif -} - -/** - * @brief Releases exclusive access to the DMA2D module. - * @pre In order to use this function the option - * @p DMA2D_USE_MUTUAL_EXCLUSION must be enabled. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dReleaseBus(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dReleaseBusS(dma2dp); - chSysUnlock(); -} - -#endif /* DMA2D_USE_MUTUAL_EXCLUSION */ - -/** @} */ - -/** - * @name DMA2D global methods - * @{ - */ - -/** - * @brief Get watermark position. - * @details Gets the watermark line position. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return watermark line position - * - * @iclass - */ -uint16_t dma2dGetWatermarkPosI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (uint16_t)(DMA2D->LWR & DMA2D_LWR_LW); -} - -/** - * @brief Get watermark position. - * @details Gets the watermark line position. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return watermark line position - * - * @api - */ -uint16_t dma2dGetWatermarkPos(DMA2DDriver *dma2dp) { - - uint16_t line; - chSysLock(); - line = dma2dGetWatermarkPosI(dma2dp); - chSysUnlock(); - return line; -} - -/** - * @brief Set watermark position. - * @details Sets the watermark line position. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] line watermark line position - * - * @iclass - */ -void dma2dSetWatermarkPosI(DMA2DDriver *dma2dp, uint16_t line) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - (void)dma2dp; - - DMA2D->LWR = ((DMA2D->LWR & ~DMA2D_LWR_LW) | - ((uint32_t)line & DMA2D_LWR_LW)); -} - -/** - * @brief Set watermark position. - * @details Sets the watermark line position. - * @note The interrupt is invoked after the last pixel of the watermark line - * is written. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] line watermark line position - * - * @iclass - */ -void dma2dSetWatermarkPos(DMA2DDriver *dma2dp, uint16_t line) { - - chSysLock(); - dma2dSetWatermarkPosI(dma2dp, line); - chSysUnlock(); -} - -/** - * @brief Watermark interrupt enabled. - * @details Tells whether the watermark interrupt is enabled. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return enabled - * - * @iclass - */ -bool dma2dIsWatermarkEnabledI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (DMA2D->CR & DMA2D_CR_TWIE) != 0; -} - -/** - * @brief Watermark interrupt enabled. - * @details Tells whether the watermark interrupt is enabled. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return enabled - * - * @api - */ -bool dma2dIsWatermarkEnabled(DMA2DDriver *dma2dp) { - - bool enabled; - chSysLock(); - enabled = dma2dIsWatermarkEnabledI(dma2dp); - chSysUnlock(); - return enabled; -} - -/** - * @brief Enable watermark interrupt. - * @details Enables the watermark interrupt. The interrupt is invoked after the - * last pixel of the watermark line is written to the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dEnableWatermarkI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - DMA2D->CR |= DMA2D_CR_TWIE; -} - -/** - * @brief Enable watermark interrupt. - * @details Enables the watermark interrupt. The interrupt is invoked after the - * last pixel of the watermark line is written to the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dEnableWatermark(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dEnableWatermarkI(dma2dp); - chSysUnlock(); -} - -/** - * @brief Disable watermark interrupt. - * @details Disables the watermark interrupt. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dDisableWatermarkI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - DMA2D->CR &= ~DMA2D_CR_TWIE; -} - -/** - * @brief Disable watermark interrupt. - * @details Disables the watermark interrupt. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dDisableWatermark(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dDisableWatermarkI(dma2dp); - chSysUnlock(); -} - -/** - * @brief Get dead time cycles. - * @details Gets the minimum dead time DMA2D clock cycles between DMA2D - * transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return dead time, in DMA2D clock cycles - * - * @iclass - */ -uint32_t dma2dGetDeadTimeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (DMA2D->AMTCR & DMA2D_AMTCR_DT) >> 8; -} - -/** - * @brief Get dead time cycles. - * @details Gets the minimum dead time DMA2D clock cycles between DMA2D - * transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return dead time, in DMA2D clock cycles - * - * @api - */ -uint32_t dma2dGetDeadTime(DMA2DDriver *dma2dp) { - - uint32_t cycles; - chSysLock(); - cycles = dma2dGetDeadTimeI(dma2dp); - chSysUnlock(); - return cycles; -} - -/** - * @brief Set dead time cycles. - * @details Sets the minimum dead time DMA2D clock cycles between DMA2D - * transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cycles dead time, in DMA2D clock cycles - * - * @iclass - */ -void dma2dSetDeadTimeI(DMA2DDriver *dma2dp, uint32_t cycles) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(cycles <= DMA2D_MAX_DEADTIME_CYCLES, "bounds"); - (void)dma2dp; - - DMA2D->AMTCR = ((DMA2D->AMTCR & ~DMA2D_AMTCR_DT) | - ((cycles << 8) & DMA2D_AMTCR_DT)); -} - -/** - * @brief Set dead time cycles. - * @details Sets the minimum dead time DMA2D clock cycles between DMA2D - * transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cycles dead time, in DMA2D clock cycles - * - * @api - */ -void dma2dSetDeadTime(DMA2DDriver *dma2dp, uint32_t cycles) { - - chSysLock(); - dma2dSetDeadTimeI(dma2dp, cycles); - chSysUnlock(); -} - -/** - * @brief Dead time enabled. - * @details Tells whether the dead time between DMA2D transactions is enabled. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return enabled - * - * @iclass - */ -bool dma2dIsDeadTimeEnabledI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (DMA2D->AMTCR & DMA2D_AMTCR_EN) != 0; -} - -/** - * @brief Dead time enabled. - * @details Tells whether the dead time between DMA2D transactions is enabled. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return enabled - * - * @api - */ -bool dma2dIsDeadTimeEnabled(DMA2DDriver *dma2dp) { - - bool enabled; - chSysLock(); - enabled = dma2dIsDeadTimeEnabledI(dma2dp); - chSysUnlock(); - return enabled; -} - -/** - * @brief Enable dead time. - * @details Enables the dead time between DMA2D transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dEnableDeadTimeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - DMA2D->AMTCR |= DMA2D_AMTCR_EN; -} - -/** - * @brief Enable dead time. - * @details Enables the dead time between DMA2D transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dEnableDeadTime(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dEnableDeadTimeI(dma2dp); - chSysUnlock(); -} - -/** - * @brief Disable dead time. - * @details Disables the dead time between DMA2D transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dDisableDeadTimeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - DMA2D->AMTCR &= ~DMA2D_AMTCR_EN; -} - -/** - * @brief Disable dead time. - * @details Disables the dead time between DMA2D transactions. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dDisableDeadTime(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dDisableDeadTimeI(dma2dp); - chSysUnlock(); -} - -/** @} */ - -/** - * @name DMA2D job (transaction) methods - * @{ - */ - -/** - * @brief Get job mode. - * @details Gets the job mode. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return job mode - * - * @iclass - */ -dma2d_jobmode_t dma2dJobGetModeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_jobmode_t)(DMA2D->CR & DMA2D_CR_MODE); -} - -/** - * @brief Get job mode. - * @details Gets the job mode. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return job mode - * - * @api - */ -dma2d_jobmode_t dma2dJobGetMode(DMA2DDriver *dma2dp) { - - dma2d_jobmode_t mode; - chSysLock(); - mode = dma2dJobGetModeI(dma2dp); - chSysUnlock(); - return mode; -} - -/** - * @brief Set job mode. - * @details Sets the job mode. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] mode job mode - * - * @iclass - */ -void dma2dJobSetModeI(DMA2DDriver *dma2dp, dma2d_jobmode_t mode) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert((mode & ~DMA2D_CR_MODE) == 0, "bounds"); - (void)dma2dp; - - DMA2D->CR = ((DMA2D->CR & ~DMA2D_CR_MODE) | - ((uint32_t)mode & DMA2D_CR_MODE)); -} - -/** - * @brief Set job mode. - * @details Sets the job mode. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] mode job mode - * - * @api - */ -void dma2dJobSetMode(DMA2DDriver *dma2dp, dma2d_jobmode_t mode) { - - chSysLock(); - dma2dJobSetModeI(dma2dp, mode); - chSysUnlock(); -} - -/** - * @brief Get job size. - * @details Gets the job size. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] widthp pointer to the job width, in pixels - * @param[out] heightp pointer to the job height, in pixels - * - * @iclass - */ -void dma2dJobGetSizeI(DMA2DDriver *dma2dp, - uint16_t *widthp, uint16_t *heightp) { - - uint32_t r; - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(widthp != NULL); - osalDbgCheck(heightp != NULL); - (void)dma2dp; - - r = DMA2D->NLR; - *widthp = (uint16_t)((r & DMA2D_NLR_PL) >> 16); - *heightp = (uint16_t)((r & DMA2D_NLR_NL) >> 0); -} - -/** - * @brief Get job size. - * @details Gets the job size. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] widthp pointer to the job width, in pixels - * @param[out] heightp pointer to the job height, in pixels - * - * @api - */ -void dma2dJobGetSize(DMA2DDriver *dma2dp, - uint16_t *widthp, uint16_t *heightp) { - - chSysLock(); - dma2dJobGetSizeI(dma2dp, widthp, heightp); - chSysUnlock(); -} - -/** - * @brief Set job size. - * @details Sets the job size. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] widthp job width, in pixels - * @param[in] heightp job height, in pixels - * - * @iclass - */ -void dma2dJobSetSizeI(DMA2DDriver *dma2dp, uint16_t width, uint16_t height) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(width <= DMA2D_MAX_WIDTH, "bounds"); - osalDbgAssert(height <= DMA2D_MAX_HEIGHT, "bounds"); - (void)dma2dp; - - DMA2D->NLR = ((((uint32_t)width << 16) & DMA2D_NLR_PL) | - (((uint32_t)height << 0) & DMA2D_NLR_NL)); -} - -/** - * @brief Set job size. - * @details Sets the job size. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] widthp job width, in pixels - * @param[in] heightp job height, in pixels - * - * @api - */ -void dma2dJobSetSize(DMA2DDriver *dma2dp, uint16_t width, uint16_t height) { - - chSysLock(); - dma2dJobSetSizeI(dma2dp, width, height); - chSysUnlock(); -} - -/** - * @brief Job executing. - * @details Tells whether a job (transaction) is active or paused. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return executing - * - * @iclass - */ -bool dma2dJobIsExecutingI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - - return dma2dp->state > DMA2D_READY; -} - -/** - * @brief Job executing. - * @details Tells whether a job (transaction) is active or paused. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return executing - * - * @api - */ -bool dma2dJobIsExecuting(DMA2DDriver *dma2dp) { - - bool executing; - chSysLock(); - executing = dma2dJobIsExecutingI(dma2dp); - chSysUnlock(); - return executing; -} - -/** - * @brief Start job. - * @details The job is started, and the DMA2D is set to active. - * @note Should there be invalid parameters, the appropriate interrupt - * handler will be invoked, and the DMA2D set back to ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dJobStartI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - - dma2dp->state = DMA2D_ACTIVE; - DMA2D->CR |= DMA2D_CR_START; -} - -/** - * @brief Start job. - * @details The job is started, and the DMA2D is set to active. - * @note Should there be invalid parameters, the appropriate interrupt - * handler will be invoked, and the DMA2D set back to ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dJobStart(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dJobStartI(dma2dp); - chSysUnlock(); -} - -/** - * @brief Execute job. - * @details Starts the job and waits for its completion, synchronously. - * @note Should there be invalid parameters, the appropriate interrupt - * handler will be invoked, and the DMA2D set back to ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @sclass - */ -void dma2dJobExecuteS(DMA2DDriver *dma2dp) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - - dma2dJobStartI(dma2dp); -#if DMA2D_USE_WAIT - dma2dp->thread = chThdGetSelfX(); - chSchGoSleepS(CH_STATE_SUSPENDED); -#else - while (DMA2D->CR & DMA2D_CR_START) - chSchDoYieldS(); -#endif -} - -/** - * @brief Execute job. - * @details Starts the job and waits for its completion, synchronously. - * @note Should there be invalid parameters, the appropriate interrupt - * handler will be invoked, and the DMA2D set back to ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dJobExecute(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dJobExecuteS(dma2dp); - chSysUnlock(); -} - -/** - * @brief Suspend current job. - * @details Suspends the current job. The driver is set to a paused state. - * @pre There is an active job. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dJobSuspendI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck((DMA2D->CR & DMA2D_CR_SUSP) == 0); - osalDbgAssert(dma2dp->state == DMA2D_ACTIVE, "invalid state"); - - dma2dp->state = DMA2D_PAUSED; - DMA2D->CR |= DMA2D_CR_SUSP; -} - -/** - * @brief Suspend current job. - * @details Suspends the current job. The driver is set to a paused state. - * @pre There is an active job. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dJobSuspend(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dJobSuspendI(dma2dp); - chSysUnlock(); -} - -/** - * @brief Resume current job. - * @details Resumes the current job. - * @pre There is a paused job. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dJobResumeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck((DMA2D->CR & DMA2D_CR_SUSP) != 0); - osalDbgAssert(dma2dp->state == DMA2D_PAUSED, "invalid state"); - - dma2dp->state = DMA2D_ACTIVE; - DMA2D->CR &= ~DMA2D_CR_SUSP; -} - -/** - * @brief Resume current job. - * @details Resumes the current job. - * @pre There is a paused job. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dJobResume(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dJobResumeI(dma2dp); - chSysUnlock(); -} - -/** - * @brief Abort current job. - * @details Abots the current job (if any), and the driver becomes ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @iclass - */ -void dma2dJobAbortI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck((DMA2D->CR & DMA2D_CR_SUSP) == 0); - osalDbgAssert(dma2dp->state >= DMA2D_READY, "invalid state"); - - dma2dp->state = DMA2D_READY; - DMA2D->CR |= DMA2D_CR_ABORT; -} - -/** - * @brief Abort current job. - * @details Abots the current job (if any), and the driver becomes ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @api - */ -void dma2dJobAbort(DMA2DDriver *dma2dp) { - - chSysLock(); - dma2dJobAbortI(dma2dp); - chSysUnlock(); -} - -/** @} */ - -/** - * @name DMA2D background layer methods - * @{ - */ - -/** - * @brief Get background layer buffer address. - * @details Gets the buffer address of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return buffer address - * - * @iclass - */ -void *dma2dBgGetAddressI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (void *)DMA2D->BGMAR; -} - -/** - * @brief Get background layer buffer address. - * @details Gets the buffer address of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return buffer address - * - * @api - */ -void *dma2dBgGetAddress(DMA2DDriver *dma2dp) { - - void *bufferp; - chSysLock(); - bufferp = dma2dBgGetAddressI(dma2dp); - chSysUnlock(); - return bufferp; -} - -/** - * @brief Set background layer buffer address. - * @details Sets the buffer address of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] bufferp buffer address - * - * @iclass - */ -void dma2dBgSetAddressI(DMA2DDriver *dma2dp, void *bufferp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(dma2dIsAligned(bufferp, dma2dBgGetPixelFormatI(dma2dp))); - (void)dma2dp; - - DMA2D->BGMAR = (uint32_t)bufferp; -} - -/** - * @brief Set background layer buffer address. - * @details Sets the buffer address of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] bufferp buffer address - * - * @api - */ -void dma2dBgSetAddress(DMA2DDriver *dma2dp, void *bufferp) { - - chSysLock(); - dma2dBgSetAddressI(dma2dp, bufferp); - chSysUnlock(); -} - -/** - * @brief Get background layer wrap offset. - * @details Gets the buffer line wrap offset of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return wrap offset, in pixels - * - * @iclass - */ -size_t dma2dBgGetWrapOffsetI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (size_t)(DMA2D->BGOR & DMA2D_BGOR_LO); -} - -/** - * @brief Get background layer wrap offset. - * @details Gets the buffer line wrap offset of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return wrap offset, in pixels - * - * @api - */ -size_t dma2dBgGetWrapOffset(DMA2DDriver *dma2dp) { - - size_t offset; - chSysLock(); - offset = dma2dBgGetWrapOffsetI(dma2dp); - chSysUnlock(); - return offset; -} - -/** - * @brief Set background layer wrap offset. - * @details Sets the buffer line wrap offset of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] offset wrap offset, in pixels - * - * @iclass - */ -void dma2dBgSetWrapOffsetI(DMA2DDriver *dma2dp, size_t offset) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(offset <= DMA2D_MAX_OFFSET, "bounds"); - (void)dma2dp; - - DMA2D->BGOR = ((DMA2D->BGOR & ~DMA2D_BGOR_LO) | - ((uint32_t)offset & DMA2D_BGOR_LO)); -} - -/** - * @brief Set background layer wrap offset. - * @details Sets the buffer line wrap offset of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] offset wrap offset, in pixels - * - * @api - */ -void dma2dBgSetWrapOffset(DMA2DDriver *dma2dp, size_t offset) { - - chSysLock(); - dma2dBgSetWrapOffsetI(dma2dp, offset); - chSysUnlock(); -} - -/** - * @brief Get background layer constant alpha. - * @details Gets the constant alpha component of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return constant alpha component, A-8 - * - * @iclass - */ -uint8_t dma2dBgGetConstantAlphaI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (uint8_t)((DMA2D->BGPFCCR & DMA2D_BGPFCCR_ALPHA) >> 24); -} - -/** - * @brief Get background layer constant alpha. - * @details Gets the constant alpha component of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return constant alpha component, A-8 - * - * @api - */ -uint8_t dma2dBgGetConstantAlpha(DMA2DDriver *dma2dp) { - - uint8_t a; - chSysLock(); - a = dma2dBgGetConstantAlphaI(dma2dp); - chSysUnlock(); - return a; -} - -/** - * @brief Set background layer constant alpha. - * @details Sets the constant alpha component of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] a constant alpha component, A-8 - * - * @iclass - */ -void dma2dBgSetConstantAlphaI(DMA2DDriver *dma2dp, uint8_t a) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - (void)dma2dp; - - DMA2D->BGPFCCR = ((DMA2D->BGPFCCR & ~DMA2D_BGPFCCR_ALPHA) | - (((uint32_t)a << 24) & DMA2D_BGPFCCR_ALPHA)); -} - -/** - * @brief Set background layer constant alpha. - * @details Sets the constant alpha component of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] a constant alpha component, A-8 - * - * @api - */ -void dma2dBgSetConstantAlpha(DMA2DDriver *dma2dp, uint8_t a) { - - chSysLock(); - dma2dBgSetConstantAlphaI(dma2dp, a); - chSysUnlock(); -} - -/** - * @brief Get background layer alpha mode. - * @details Gets the alpha mode of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return alpha mode - * - * @iclass - */ -dma2d_amode_t dma2dBgGetAlphaModeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_amode_t)(DMA2D->BGPFCCR & DMA2D_BGPFCCR_AM); -} - -/** - * @brief Get background layer alpha mode. - * @details Gets the alpha mode of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return alpha mode - * - * @api - */ -dma2d_amode_t dma2dBgGetAlphaMode(DMA2DDriver *dma2dp) { - - dma2d_amode_t mode; - chSysLock(); - mode = dma2dBgGetAlphaModeI(dma2dp); - chSysUnlock(); - return mode; -} - -/** - * @brief Set background layer alpha mode. - * @details Sets the alpha mode of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] mode alpha mode - * - * @iclass - */ -void dma2dBgSetAlphaModeI(DMA2DDriver *dma2dp, dma2d_amode_t mode) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert((mode & ~DMA2D_BGPFCCR_AM) == 0, "bounds"); - osalDbgAssert((mode & DMA2D_BGPFCCR_AM) != DMA2D_BGPFCCR_AM, "bounds"); - (void)dma2dp; - - DMA2D->BGPFCCR = ((DMA2D->BGPFCCR & ~DMA2D_BGPFCCR_AM) | - ((uint32_t)mode & DMA2D_BGPFCCR_AM)); -} - -/** - * @brief Set background layer alpha mode. - * @details Sets the alpha mode of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] mode alpha mode - * - * @api - */ -void dma2dBgSetAlphaMode(DMA2DDriver *dma2dp, dma2d_amode_t mode) { - - chSysLock(); - dma2dBgSetAlphaModeI(dma2dp, mode); - chSysUnlock(); -} - -/** - * @brief Get background layer pixel format. - * @details Gets the pixel format of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return pixel format - * - * @iclass - */ -dma2d_pixfmt_t dma2dBgGetPixelFormatI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_pixfmt_t)(DMA2D->BGPFCCR & DMA2D_BGPFCCR_CM); -} - -/** - * @brief Get background layer pixel format. - * @details Gets the pixel format of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return pixel format - * - * @api - */ -dma2d_pixfmt_t dma2dBgGetPixelFormat(DMA2DDriver *dma2dp) { - - dma2d_pixfmt_t fmt; - chSysLock(); - fmt = dma2dBgGetPixelFormatI(dma2dp); - chSysUnlock(); - return fmt; -} - -/** - * @brief Set background layer pixel format. - * @details Sets the pixel format of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] fmt pixel format - * - * @iclass - */ -void dma2dBgSetPixelFormatI(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(fmt <= DMA2D_MAX_PIXFMT_ID, "bounds"); - (void)dma2dp; - - DMA2D->BGPFCCR = ((DMA2D->BGPFCCR & ~DMA2D_BGPFCCR_CM) | - ((uint32_t)fmt & DMA2D_BGPFCCR_CM)); -} - -/** - * @brief Set background layer pixel format. - * @details Sets the pixel format of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] fmt pixel format - * - * @api - */ -void dma2dBgSetPixelFormat(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt) { - - chSysLock(); - dma2dBgSetPixelFormatI(dma2dp, fmt); - chSysUnlock(); -} - -/** - * @brief Get background layer default color. - * @details Gets the default color of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return default color, RGB-888 - * - * @iclass - */ -dma2d_color_t dma2dBgGetDefaultColorI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_color_t)(DMA2D->BGCOLR & 0x00FFFFFF); -} - -/** - * @brief Get background layer default color. - * @details Gets the default color of the background layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return default color, RGB-888 - * - * @api - */ -dma2d_color_t dma2dBgGetDefaultColor(DMA2DDriver *dma2dp) { - - dma2d_color_t c; - chSysLock(); - c = dma2dBgGetDefaultColorI(dma2dp); - chSysUnlock(); - return c; -} - -/** - * @brief Set background layer default color. - * @details Sets the default color of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] c default color, RGB-888 - * - * @iclass - */ -void dma2dBgSetDefaultColorI(DMA2DDriver *dma2dp, dma2d_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - (void)dma2dp; - - DMA2D->BGCOLR = (uint32_t)c & 0x00FFFFFF; -} - -/** - * @brief Set background layer default color. - * @details Sets the default color of the background layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] c default color, RGB-888 - * - * @api - */ -void dma2dBgSetDefaultColor(DMA2DDriver *dma2dp, dma2d_color_t c) { - - chSysLock(); - dma2dBgSetDefaultColorI(dma2dp, c); - chSysUnlock(); -} - -/** - * @brief Get background layer palette specifications. - * @details Gets the palette specifications of the background layer. - * @note The palette colors pointer is actually addressed to a @p volatile - * memory zone. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] palettep pointer to the palette specifications - * - * @iclass - */ -void dma2dBgGetPaletteI(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep) { - - uint32_t r; - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(palettep != NULL); - (void)dma2dp; - - r = DMA2D->BGPFCCR; - palettep->colorsp = (const void *)DMA2D->BGCLUT; - palettep->length = (uint16_t)((r & DMA2D_BGPFCCR_CS) >> 8) + 1; - palettep->fmt = (dma2d_pixfmt_t)((r & DMA2D_BGPFCCR_CCM) >> 4); -} - -/** - * @brief Get background layer palette specifications. - * @details Gets the palette specifications of the background layer. - * @note The palette colors pointer is actually addressed to a @p volatile - * memory zone. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] palettep pointer to the palette specifications - * - * @api - */ -void dma2dBgGetPalette(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep) { - - chSysLock(); - dma2dBgGetPaletteI(dma2dp, palettep); - chSysUnlock(); -} - -/** - * @brief Set background layer palette specifications. - * @details Sets the palette specifications of the background layer. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] palettep pointer to the palette specifications - * - * @sclass - */ -void dma2dBgSetPaletteS(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(palettep != NULL); - osalDbgCheck(palettep->colorsp != NULL); - osalDbgAssert(palettep->length > 0, "bounds"); - osalDbgAssert(palettep->length <= DMA2D_MAX_PALETTE_LENGTH, "bounds"); - osalDbgAssert(((palettep->fmt == DMA2D_FMT_ARGB8888) || - (palettep->fmt == DMA2D_FMT_RGB888)), "invalid format"); - - DMA2D->BGCMAR = (uint32_t)palettep->colorsp; - DMA2D->BGPFCCR = ( - (DMA2D->BGPFCCR & ~(DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM)) | - ((((uint32_t)palettep->length - 1) << 8) & DMA2D_BGPFCCR_CS) | - ((uint32_t)palettep->fmt << 4) - ); - - dma2dp->state = DMA2D_ACTIVE; - DMA2D->BGPFCCR |= DMA2D_BGPFCCR_START; - -#if DMA2D_USE_WAIT - dma2dp->thread = chThdGetSelfX(); - chSchGoSleepS(CH_STATE_SUSPENDED); -#else - while (DMA2D->BGPFCCR & DMA2D_BGPFCCR_START) - chSchDoYieldS(); -#endif /* DMA2D_USE_WAIT */ -} - -/** - * @brief Set background layer palette specifications. - * @details Sets the palette specifications of the background layer. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] palettep pointer to the palette specifications - * - * @api - */ -void dma2dBgSetPalette(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep) { - - chSysLock(); - dma2dBgSetPaletteS(dma2dp, palettep); - chSysUnlock(); -} - -/** - * @brief Get background layer specifications. - * @details Gets the background layer specifications at once. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @iclass - */ -void dma2dBgGetLayerI(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(cfgp != NULL); - - cfgp->bufferp = dma2dBgGetAddressI(dma2dp); - cfgp->wrap_offset = dma2dBgGetWrapOffsetI(dma2dp); - cfgp->fmt = dma2dBgGetPixelFormatI(dma2dp); - cfgp->def_color = dma2dBgGetDefaultColorI(dma2dp); - cfgp->const_alpha = dma2dBgGetConstantAlphaI(dma2dp); - if (cfgp->palettep != NULL) - dma2dBgGetPaletteI(dma2dp, (dma2d_palcfg_t *)cfgp->palettep); -} - -/** - * @brief Get background layer specifications. - * @details Gets the background layer specifications at once. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @api - */ -void dma2dBgGetLayer(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp) { - - chSysLock(); - dma2dBgGetLayerI(dma2dp, cfgp); - chSysUnlock(); -} - -/** - * @brief Set background layer specifications. - * @details Sets the background layer specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @sclass - */ -void dma2dBgSetConfigS(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(cfgp != NULL); - - dma2dBgSetAddressI(dma2dp, cfgp->bufferp); - dma2dBgSetWrapOffsetI(dma2dp, cfgp->wrap_offset); - dma2dBgSetPixelFormatI(dma2dp, cfgp->fmt); - dma2dBgSetDefaultColorI(dma2dp, cfgp->def_color); - dma2dBgSetConstantAlphaI(dma2dp, cfgp->const_alpha); - if (cfgp->palettep != NULL) - dma2dBgSetPaletteS(dma2dp, cfgp->palettep); -} - -/** - * @brief Set background layer specifications. - * @details Sets the background layer specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @api - */ -void dma2dBgSetConfig(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp) { - - chSysLock(); - dma2dBgSetConfigS(dma2dp, cfgp); - chSysUnlock(); -} - -/** @} */ - -/** - * @name DMA2D foreground layer methods - * @{ - */ - -/** - * @brief Get foreground layer buffer address. - * @details Gets the buffer address of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return buffer address - * - * @iclass - */ -void *dma2dFgGetAddressI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (void *)DMA2D->FGMAR; -} - -/** - * @brief Get foreground layer buffer address. - * @details Gets the buffer address of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return buffer address - * - * @api - */ -void *dma2dFgGetAddress(DMA2DDriver *dma2dp) { - - void *bufferp; - chSysLock(); - bufferp = dma2dFgGetAddressI(dma2dp); - chSysUnlock(); - return bufferp; -} - -/** - * @brief Set foreground layer buffer address. - * @details Sets the buffer address of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] bufferp buffer address - * - * @iclass - */ -void dma2dFgSetAddressI(DMA2DDriver *dma2dp, void *bufferp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(dma2dIsAligned(bufferp, dma2dFgGetPixelFormatI(dma2dp))); - (void)dma2dp; - - DMA2D->FGMAR = (uint32_t)bufferp; -} - -/** - * @brief Set foreground layer buffer address. - * @details Sets the buffer address of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] bufferp buffer address - * - * @api - */ -void dma2dFgSetAddress(DMA2DDriver *dma2dp, void *bufferp) { - - chSysLock(); - dma2dFgSetAddressI(dma2dp, bufferp); - chSysUnlock(); -} - -/** - * @brief Get foreground layer wrap offset. - * @details Gets the buffer line wrap offset of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return wrap offset, in pixels - * - * @iclass - */ -size_t dma2dFgGetWrapOffsetI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (size_t)(DMA2D->FGOR & DMA2D_FGOR_LO); -} - -/** - * @brief Get foreground layer wrap offset. - * @details Gets the buffer line wrap offset of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return wrap offset, in pixels - * - * @api - */ -size_t dma2dFgGetWrapOffset(DMA2DDriver *dma2dp) { - - size_t offset; - chSysLock(); - offset = dma2dFgGetWrapOffsetI(dma2dp); - chSysUnlock(); - return offset; -} - -/** - * @brief Set foreground layer wrap offset. - * @details Sets the buffer line wrap offset of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] offset wrap offset, in pixels - * - * @iclass - */ -void dma2dFgSetWrapOffsetI(DMA2DDriver *dma2dp, size_t offset) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(offset <= DMA2D_MAX_OFFSET, "bounds"); - (void)dma2dp; - - DMA2D->FGOR = ((DMA2D->FGOR & ~DMA2D_FGOR_LO) | - ((uint32_t)offset & DMA2D_FGOR_LO)); -} - -/** - * @brief Set foreground layer wrap offset. - * @details Sets the buffer line wrap offset of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] offset wrap offset, in pixels - * - * @api - */ -void dma2dFgSetWrapOffset(DMA2DDriver *dma2dp, size_t offset) { - - chSysLock(); - dma2dFgSetWrapOffsetI(dma2dp, offset); - chSysUnlock(); -} - -/** - * @brief Get foreground layer constant alpha. - * @details Gets the constant alpha component of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return constant alpha component, A-8 - * - * @iclass - */ -uint8_t dma2dFgGetConstantAlphaI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (uint8_t)((DMA2D->FGPFCCR & DMA2D_FGPFCCR_ALPHA) >> 24); -} - -/** - * @brief Get foreground layer constant alpha. - * @details Gets the constant alpha component of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return constant alpha component, A-8 - * - * @api - */ -uint8_t dma2dFgGetConstantAlpha(DMA2DDriver *dma2dp) { - - uint8_t a; - chSysLock(); - a = dma2dFgGetConstantAlphaI(dma2dp); - chSysUnlock(); - return a; -} - -/** - * @brief Set foreground layer constant alpha. - * @details Sets the constant alpha component of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] a constant alpha component, A-8 - * - * @iclass - */ -void dma2dFgSetConstantAlphaI(DMA2DDriver *dma2dp, uint8_t a) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - (void)dma2dp; - - DMA2D->FGPFCCR = ((DMA2D->FGPFCCR & ~DMA2D_FGPFCCR_ALPHA) | - (((uint32_t)a << 24) & DMA2D_FGPFCCR_ALPHA)); -} - -/** - * @brief Set foreground layer constant alpha. - * @details Sets the constant alpha component of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] a constant alpha component, A-8 - * - * @api - */ -void dma2dFgSetConstantAlpha(DMA2DDriver *dma2dp, uint8_t a) { - - chSysLock(); - dma2dFgSetConstantAlphaI(dma2dp, a); - chSysUnlock(); -} - -/** - * @brief Get foreground layer alpha mode. - * @details Gets the alpha mode of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return alpha mode - * - * @iclass - */ -dma2d_amode_t dma2dFgGetAlphaModeI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_amode_t)(DMA2D->FGPFCCR & DMA2D_FGPFCCR_AM); -} - -/** - * @brief Get foreground layer alpha mode. - * @details Gets the alpha mode of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return alpha mode - * - * @api - */ -dma2d_amode_t dma2dFgGetAlphaMode(DMA2DDriver *dma2dp) { - - dma2d_amode_t mode; - chSysLock(); - mode = dma2dFgGetAlphaModeI(dma2dp); - chSysUnlock(); - return mode; -} - -/** - * @brief Set foreground layer alpha mode. - * @details Sets the alpha mode of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] mode alpha mode - * - * @iclass - */ -void dma2dFgSetAlphaModeI(DMA2DDriver *dma2dp, dma2d_amode_t mode) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert((mode & ~DMA2D_FGPFCCR_AM) == 0, "bounds"); - osalDbgAssert((mode & DMA2D_FGPFCCR_AM) != DMA2D_FGPFCCR_AM, "bounds"); - (void)dma2dp; - - DMA2D->FGPFCCR = ((DMA2D->FGPFCCR & ~DMA2D_FGPFCCR_AM) | - ((uint32_t)mode & DMA2D_FGPFCCR_AM)); -} - -/** - * @brief Set foreground layer alpha mode. - * @details Sets the alpha mode of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] mode alpha mode - * - * @api - */ -void dma2dFgSetAlphaMode(DMA2DDriver *dma2dp, dma2d_amode_t mode) { - - chSysLock(); - dma2dFgSetAlphaModeI(dma2dp, mode); - chSysUnlock(); -} - -/** - * @brief Get foreground layer pixel format. - * @details Gets the pixel format of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return pixel format - * - * @iclass - */ -dma2d_pixfmt_t dma2dFgGetPixelFormatI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_pixfmt_t)(DMA2D->FGPFCCR & DMA2D_FGPFCCR_CM); -} - -/** - * @brief Get foreground layer pixel format. - * @details Gets the pixel format of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return pixel format - * - * @api - */ -dma2d_pixfmt_t dma2dFgGetPixelFormat(DMA2DDriver *dma2dp) { - - dma2d_pixfmt_t fmt; - chSysLock(); - fmt = dma2dFgGetPixelFormatI(dma2dp); - chSysUnlock(); - return fmt; -} - -/** - * @brief Set foreground layer pixel format. - * @details Sets the pixel format of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] fmt pixel format - * - * @iclass - */ -void dma2dFgSetPixelFormatI(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(fmt <= DMA2D_MAX_PIXFMT_ID, "bounds"); - (void)dma2dp; - - DMA2D->FGPFCCR = ((DMA2D->FGPFCCR & ~DMA2D_FGPFCCR_CM) | - ((uint32_t)fmt & DMA2D_FGPFCCR_CM)); -} - -/** - * @brief Set foreground layer pixel format. - * @details Sets the pixel format of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] fmt pixel format - * - * @api - */ -void dma2dFgSetPixelFormat(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt) { - - chSysLock(); - dma2dFgSetPixelFormatI(dma2dp, fmt); - chSysUnlock(); -} - -/** - * @brief Get foreground layer default color. - * @details Gets the default color of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return default color, RGB-888 - * - * @iclass - */ -dma2d_color_t dma2dFgGetDefaultColorI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_color_t)(DMA2D->FGCOLR & 0x00FFFFFF); -} - -/** - * @brief Get foreground layer default color. - * @details Gets the default color of the foreground layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return default color, RGB-888 - * - * @api - */ -dma2d_color_t dma2dFgGetDefaultColor(DMA2DDriver *dma2dp) { - - dma2d_color_t c; - chSysLock(); - c = dma2dFgGetDefaultColorI(dma2dp); - chSysUnlock(); - return c; -} - -/** - * @brief Set foreground layer default color. - * @details Sets the default color of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] c default color, RGB-888 - * - * @iclass - */ -void dma2dFgSetDefaultColorI(DMA2DDriver *dma2dp, dma2d_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - (void)dma2dp; - - DMA2D->FGCOLR = (uint32_t)c & 0x00FFFFFF; -} - -/** - * @brief Set foreground layer default color. - * @details Sets the default color of the foreground layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] c default color, RGB-888 - * - * @api - */ -void dma2dFgSetDefaultColor(DMA2DDriver *dma2dp, dma2d_color_t c) { - - chSysLock(); - dma2dFgSetDefaultColorI(dma2dp, c); - chSysUnlock(); -} - -/** - * @brief Get foreground layer palette specifications. - * @details Gets the palette specifications of the foreground layer. - * @note The palette colors pointer is actually addressed to a @p volatile - * memory zone. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] palettep pointer to the palette specifications - * - * @iclass - */ -void dma2dFgGetPaletteI(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep) { - - uint32_t r; - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(palettep != NULL); - (void)dma2dp; - - r = DMA2D->FGPFCCR; - palettep->colorsp = (const void *)DMA2D->FGCLUT; - palettep->length = (uint16_t)((r & DMA2D_FGPFCCR_CS) >> 8) + 1; - palettep->fmt = (dma2d_pixfmt_t)((r & DMA2D_FGPFCCR_CCM) >> 4); -} - -/** - * @brief Get foreground layer palette specifications. - * @details Gets the palette specifications of the foreground layer. - * @note The palette colors pointer is actually addressed to a @p volatile - * memory zone. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] palettep pointer to the palette specifications - * - * @api - */ -void dma2dFgGetPalette(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep) { - - chSysLock(); - dma2dFgGetPaletteI(dma2dp, palettep); - chSysUnlock(); -} - -/** - * @brief Set foreground layer palette specifications. - * @details Sets the palette specifications of the foreground layer. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] palettep pointer to the palette specifications - * - * @sclass - */ -void dma2dFgSetPaletteS(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(palettep != NULL); - osalDbgCheck(palettep->colorsp != NULL); - osalDbgAssert(palettep->length > 0, "bounds"); - osalDbgAssert(palettep->length <= DMA2D_MAX_PALETTE_LENGTH, "bounds"); - osalDbgAssert(((palettep->fmt == DMA2D_FMT_ARGB8888) || - (palettep->fmt == DMA2D_FMT_RGB888)), "invalid format"); - - DMA2D->FGCMAR = (uint32_t)palettep->colorsp; - DMA2D->FGPFCCR = ( - (DMA2D->FGPFCCR & ~(DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM)) | - ((((uint32_t)palettep->length - 1) << 8) & DMA2D_FGPFCCR_CS) | - ((uint32_t)palettep->fmt << 4) - ); - - dma2dp->state = DMA2D_ACTIVE; - DMA2D->FGPFCCR |= DMA2D_FGPFCCR_START; - -#if DMA2D_USE_WAIT - dma2dp->thread = chThdGetSelfX(); - chSchGoSleepS(CH_STATE_SUSPENDED); -#else - while (DMA2D->FGPFCCR & DMA2D_FGPFCCR_START) - chSchDoYieldS(); -#endif /* DMA2D_USE_WAIT */ -} - -/** - * @brief Set foreground layer palette specifications. - * @details Sets the palette specifications of the foreground layer. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] palettep pointer to the palette specifications - * - * @api - */ -void dma2dFgSetPalette(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep) { - - chSysLock(); - dma2dFgSetPaletteS(dma2dp, palettep); - chSysUnlock(); -} - -/** - * @brief Get foreground layer specifications. - * @details Gets the foreground layer specifications at once. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @iclass - */ -void dma2dFgGetLayerI(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(cfgp != NULL); - - cfgp->bufferp = dma2dFgGetAddressI(dma2dp); - cfgp->wrap_offset = dma2dFgGetWrapOffsetI(dma2dp); - cfgp->fmt = dma2dFgGetPixelFormatI(dma2dp); - cfgp->def_color = dma2dFgGetDefaultColorI(dma2dp); - cfgp->const_alpha = dma2dFgGetConstantAlphaI(dma2dp); - if (cfgp->palettep != NULL) - dma2dFgGetPaletteI(dma2dp, (dma2d_palcfg_t *)cfgp->palettep); -} - -/** - * @brief Get foreground layer specifications. - * @details Gets the foreground layer specifications at once. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @api - */ -void dma2dFgGetLayer(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp) { - - chSysLock(); - dma2dFgGetLayerI(dma2dp, cfgp); - chSysUnlock(); -} - -/** - * @brief Set foreground layer specifications. - * @details Sets the foreground layer specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @sclass - */ -void dma2dFgSetConfigS(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp) { - - osalDbgCheckClassS(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(cfgp != NULL); - - dma2dFgSetAddressI(dma2dp, cfgp->bufferp); - dma2dFgSetWrapOffsetI(dma2dp, cfgp->wrap_offset); - dma2dFgSetPixelFormatI(dma2dp, cfgp->fmt); - dma2dFgSetDefaultColorI(dma2dp, cfgp->def_color); - dma2dFgSetConstantAlphaI(dma2dp, cfgp->const_alpha); - if (cfgp->palettep != NULL) - dma2dFgSetPaletteS(dma2dp, cfgp->palettep); -} - -/** - * @brief Set foreground layer specifications. - * @details Sets the foreground layer specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * @note This function should not be called while the DMA2D is already - * executing a job, otherwise the appropriate error interrupt might be - * invoked. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @api - */ -void dma2dFgSetConfig(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp) { - - chSysLock(); - dma2dFgSetConfigS(dma2dp, cfgp); - chSysUnlock(); -} - -/** @} */ - -/** - * @name DMA2D output layer methods - * @{ - */ - -/** - * @brief Get output layer buffer address. - * @details Gets the buffer address of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return buffer address - * - * @iclass - */ -void *dma2dOutGetAddressI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (void *)DMA2D->OMAR; -} - -/** - * @brief Get output layer buffer address. - * @details Gets the buffer address of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return buffer address - * - * @api - */ -void *dma2dOutGetAddress(DMA2DDriver *dma2dp) { - - void *bufferp; - chSysLock(); - bufferp = dma2dOutGetAddressI(dma2dp); - chSysUnlock(); - return bufferp; -} - -/** - * @brief Set output layer buffer address. - * @details Sets the buffer address of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] bufferp buffer address - * - * @iclass - */ -void dma2dOutSetAddressI(DMA2DDriver *dma2dp, void *bufferp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(dma2dIsAligned(bufferp, dma2dOutGetPixelFormatI(dma2dp))); - (void)dma2dp; - - DMA2D->OMAR = (uint32_t)bufferp; -} - -/** - * @brief Set output layer buffer address. - * @details Sets the buffer address of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] bufferp buffer address - * - * @api - */ -void dma2dOutSetAddress(DMA2DDriver *dma2dp, void *bufferp) { - - chSysLock(); - dma2dOutSetAddressI(dma2dp, bufferp); - chSysUnlock(); -} - -/** - * @brief Get output layer wrap offset. - * @details Gets the buffer line wrap offset of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return wrap offset, in pixels - * - * @iclass - */ -size_t dma2dOutGetWrapOffsetI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (size_t)(DMA2D->OOR & DMA2D_OOR_LO); -} - -/** - * @brief Get output layer wrap offset. - * @details Gets the buffer line wrap offset of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return wrap offset, in pixels - * - * @api - */ -size_t dma2dOutGetWrapOffset(DMA2DDriver *dma2dp) { - - size_t offset; - chSysLock(); - offset = dma2dOutGetWrapOffsetI(dma2dp); - chSysUnlock(); - return offset; -} - -/** - * @brief Set output layer wrap offset. - * @details Sets the buffer line wrap offset of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] offset wrap offset, in pixels - * - * @iclass - */ -void dma2dOutSetWrapOffsetI(DMA2DDriver *dma2dp, size_t offset) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(offset <= DMA2D_MAX_OFFSET, "bounds"); - (void)dma2dp; - - DMA2D->OOR = ((DMA2D->OOR & ~DMA2D_OOR_LO) | - ((uint32_t)offset & DMA2D_OOR_LO)); -} - -/** - * @brief Set output layer wrap offset. - * @details Sets the buffer line wrap offset of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] offset wrap offset, in pixels - * - * @api - */ -void dma2dOutSetWrapOffset(DMA2DDriver *dma2dp, size_t offset) { - - chSysLock(); - dma2dOutSetWrapOffsetI(dma2dp, offset); - chSysUnlock(); -} - -/** - * @brief Get output layer pixel format. - * @details Gets the pixel format of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return pixel format - * - * @iclass - */ -dma2d_pixfmt_t dma2dOutGetPixelFormatI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_pixfmt_t)(DMA2D->OPFCCR & DMA2D_OPFCCR_CM); -} - -/** - * @brief Get output layer pixel format. - * @details Gets the pixel format of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return pixel format - * - * @api - */ -dma2d_pixfmt_t dma2dOutGetPixelFormat(DMA2DDriver *dma2dp) { - - dma2d_pixfmt_t fmt; - chSysLock(); - fmt = dma2dOutGetPixelFormatI(dma2dp); - chSysUnlock(); - return fmt; -} - -/** - * @brief Set output layer pixel format. - * @details Sets the pixel format of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] fmt pixel format - * - * @iclass - */ -void dma2dOutSetPixelFormatI(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgAssert(fmt <= DMA2D_MAX_OUTPIXFMT_ID, "bounds"); - (void)dma2dp; - - DMA2D->OPFCCR = ((DMA2D->OPFCCR & ~DMA2D_OPFCCR_CM) | - ((uint32_t)fmt & DMA2D_OPFCCR_CM)); -} - -/** - * @brief Set output layer pixel format. - * @details Sets the pixel format of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] fmt pixel format - * - * @api - */ -void dma2dOutSetPixelFormat(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt) { - - chSysLock(); - dma2dOutSetPixelFormatI(dma2dp, fmt); - chSysUnlock(); -} - -/** - * @brief Get output layer default color. - * @details Gets the default color of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return default color, chosen output format - * - * @iclass - */ -dma2d_color_t dma2dOutGetDefaultColorI(DMA2DDriver *dma2dp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - (void)dma2dp; - - return (dma2d_color_t)(DMA2D->OCOLR & 0x00FFFFFF); -} - -/** - * @brief Get output layer default color. - * @details Gets the default color of the output layer. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * - * @return default color, chosen output format - * - * @api - */ -dma2d_color_t dma2dOutGetDefaultColor(DMA2DDriver *dma2dp) { - - dma2d_color_t c; - chSysLock(); - c = dma2dOutGetDefaultColorI(dma2dp); - chSysUnlock(); - return c; -} - -/** - * @brief Set output layer default color. - * @details Sets the default color of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] c default color, chosen output format - * - * @iclass - */ -void dma2dOutSetDefaultColorI(DMA2DDriver *dma2dp, dma2d_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - (void)dma2dp; - - DMA2D->OCOLR = (uint32_t)c & 0x00FFFFFF; -} - -/** - * @brief Set output layer default color. - * @details Sets the default color of the output layer. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] c default color, chosen output format - * - * @api - */ -void dma2dOutSetDefaultColor(DMA2DDriver *dma2dp, dma2d_color_t c) { - - chSysLock(); - dma2dOutSetDefaultColorI(dma2dp, c); - chSysUnlock(); -} - -/** - * @brief Get output layer specifications. - * @details Gets the output layer specifications at once. - * @note Constant alpha and palette specifications are ignored. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @iclass - */ -void dma2dOutGetLayerI(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgCheck(cfgp != NULL); - - cfgp->bufferp = dma2dOutGetAddressI(dma2dp); - cfgp->wrap_offset = dma2dOutGetWrapOffsetI(dma2dp); - cfgp->fmt = dma2dOutGetPixelFormatI(dma2dp); - cfgp->def_color = dma2dOutGetDefaultColorI(dma2dp); -} - -/** - * @brief Get output layer specifications. - * @details Gets the output layer specifications at once. - * @note Constant alpha and palette specifications are ignored. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @api - */ -void dma2dOutGetLayer(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp) { - - chSysLock(); - dma2dOutGetLayerI(dma2dp, cfgp); - chSysUnlock(); -} - -/** - * @brief Set output layer specifications. - * @details Sets the output layer specifications at once. - * @note Constant alpha and palette specifications are ignored. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @iclass - */ -void dma2dOutSetConfigI(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(dma2dp == &DMA2DD1); - osalDbgAssert(dma2dp->state == DMA2D_READY, "not ready"); - osalDbgCheck(cfgp != NULL); - - dma2dOutSetAddressI(dma2dp, cfgp->bufferp); - dma2dOutSetWrapOffsetI(dma2dp, cfgp->wrap_offset); - dma2dOutSetPixelFormatI(dma2dp, cfgp->fmt); - dma2dOutSetDefaultColorI(dma2dp, cfgp->def_color); -} - -/** - * @brief Set output layer specifications. - * @details Sets the output layer specifications at once. - * @note Constant alpha and palette specifications are ignored. - * @pre DMA2D is ready. - * - * @param[in] dma2dp pointer to the @p DMA2DDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @api - */ -void dma2dOutSetConfig(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp) { - - chSysLock(); - dma2dOutSetConfigI(dma2dp, cfgp); - chSysUnlock(); -} - -/** @} */ - -/** - * @name DMA2D helper functions - * @{ - */ - -/** - * @brief Compute pixel address. - * @details Computes the buffer address of a pixel, given the buffer - * specifications. - * - * @param[in] originp buffer origin address - * @param[in] pitch buffer pitch, in bytes - * @param[in] fmt buffer pixel format - * @param[in] x horizontal pixel coordinate - * @param[in] y vertical pixel coordinate - * - * @return pixel address, constant data - * - * @api - */ -const void *dma2dComputeAddressConst(const void *originp, size_t pitch, - dma2d_pixfmt_t fmt, - uint16_t x, uint16_t y) { - - osalDbgCheck(pitch > 0); - - switch (fmt) { - case DMA2D_FMT_ARGB8888: - return (const void *)((uintptr_t)originp + - (uintptr_t)y * pitch + (uintptr_t)x * 4); - case DMA2D_FMT_RGB888: - return (const void *)((uintptr_t)originp + - (uintptr_t)y * pitch + (uintptr_t)x * 3); - case DMA2D_FMT_RGB565: - case DMA2D_FMT_ARGB1555: - case DMA2D_FMT_ARGB4444: - case DMA2D_FMT_AL88: - return (const void *)((uintptr_t)originp + - (uintptr_t)y * pitch + (uintptr_t)x * 2); - case DMA2D_FMT_L8: - case DMA2D_FMT_AL44: - case DMA2D_FMT_A8: - return (const void *)((uintptr_t)originp + - (uintptr_t)y * pitch + (uintptr_t)x); - case DMA2D_FMT_L4: - case DMA2D_FMT_A4: - osalDbgAssert((x & 1) == 0, "not aligned"); - return (const void *)((uintptr_t)originp + - (uintptr_t)y * pitch + (uintptr_t)x / 2); - default: - osalDbgAssert(false, "invalid format"); - return NULL; - } -} - -/** - * @brief Address is aligned. - * @details Tells whether the address is aligned with the provided pixel format. - * - * @param[in] bufferp address - * @param[in] fmt pixel format - * - * @return address is aligned - * - * @api - */ -bool dma2dIsAligned(const void *bufferp, dma2d_pixfmt_t fmt) { - - switch (fmt) { - case DMA2D_FMT_ARGB8888: - case DMA2D_FMT_RGB888: - return ((uintptr_t)bufferp & 3) == 0; /* 32-bit alignment.*/ - case DMA2D_FMT_RGB565: - case DMA2D_FMT_ARGB1555: - case DMA2D_FMT_ARGB4444: - case DMA2D_FMT_AL88: - return ((uintptr_t)bufferp & 1) == 0; /* 16-bit alignment.*/ - case DMA2D_FMT_L8: - case DMA2D_FMT_AL44: - case DMA2D_FMT_L4: - case DMA2D_FMT_A8: - case DMA2D_FMT_A4: - return true; /* 8-bit alignment.*/ - default: - osalDbgAssert(false, "invalid format"); - return false; - } -} - -/** - * @brief Compute bits per pixel. - * @details Computes the bits per pixel for the specified pixel format. - * - * @param[in] fmt pixel format - * - * @retuen bits per pixel - * - * @api - */ -size_t dma2dBitsPerPixel(dma2d_pixfmt_t fmt) { - - osalDbgAssert(fmt < DMA2D_MAX_PIXFMT_ID, "invalid format"); - - return (size_t)dma2d_bpp[(unsigned)fmt]; -} - -#if DMA2D_USE_SOFTWARE_CONVERSIONS || defined(__DOXYGEN__) - -/** - * @brief Convert from ARGB-8888. - * @details Converts an ARGB-8888 color to the specified pixel format. - * - * @param[in] c color, ARGB-8888 - * @param[in] fmt target pixel format - * - * @return raw color value for the target pixel format, left - * padded with zeros. - * - * @api - */ -dma2d_color_t dma2dFromARGB8888(dma2d_color_t c, dma2d_pixfmt_t fmt) { - - switch (fmt) { - case DMA2D_FMT_ARGB8888: { - return c; - } - case DMA2D_FMT_RGB888: { - return (c & 0x00FFFFFF); - } - case DMA2D_FMT_RGB565: { - return (((c & 0x000000F8) >> ( 8 - 5)) | - ((c & 0x0000FC00) >> (16 - 11)) | - ((c & 0x00F80000) >> (24 - 16))); - } - case DMA2D_FMT_ARGB1555: { - return (((c & 0x000000F8) >> ( 8 - 5)) | - ((c & 0x0000F800) >> (16 - 10)) | - ((c & 0x00F80000) >> (24 - 15)) | - ((c & 0x80000000) >> (32 - 16))); - } - case DMA2D_FMT_ARGB4444: { - return (((c & 0x000000F0) >> ( 8 - 4)) | - ((c & 0x0000F000) >> (16 - 8)) | - ((c & 0x00F00000) >> (24 - 12)) | - ((c & 0xF0000000) >> (32 - 16))); - } - case DMA2D_FMT_L8: { - return (c & 0x000000FF); - } - case DMA2D_FMT_AL44: { - return (((c & 0x000000F0) >> ( 8 - 4)) | - ((c & 0xF0000000) >> (32 - 8))); - } - case DMA2D_FMT_AL88: { - return (((c & 0x000000FF) >> ( 8 - 8)) | - ((c & 0xFF000000) >> (32 - 16))); - } - case DMA2D_FMT_L4: { - return (c & 0x0000000F); - } - case DMA2D_FMT_A8: { - return ((c & 0xFF000000) >> (32 - 8)); - } - case DMA2D_FMT_A4: { - return ((c & 0xF0000000) >> (32 - 4)); - } - default: - osalDbgAssert(false, "invalid format"); - return 0; - } -} - -/** - * @brief Convert to ARGB-8888. - * @details Converts color of the specified pixel format to an ARGB-8888 color. - * - * @param[in] c color for the source pixel format, left padded with - * zeros. - * @param[in] fmt source pixel format - * - * @return color in ARGB-8888 format - * - * @api - */ -dma2d_color_t dma2dToARGB8888(dma2d_color_t c, dma2d_pixfmt_t fmt) { - - switch (fmt) { - case DMA2D_FMT_ARGB8888: { - return c; - } - case DMA2D_FMT_RGB888: { - return ((c & 0x00FFFFFF) | 0xFF000000); - } - case DMA2D_FMT_RGB565: { - register dma2d_color_t output = 0xFF000000; - if (c & 0x001F) output |= (((c & 0x001F) << ( 8 - 5)) | 0x00000007); - if (c & 0x07E0) output |= (((c & 0x07E0) << (16 - 11)) | 0x00000300); - if (c & 0xF800) output |= (((c & 0xF800) << (24 - 16)) | 0x00070000); - return output; - } - case DMA2D_FMT_ARGB1555: { - register dma2d_color_t output = 0x00000000; - if (c & 0x001F) output |= (((c & 0x001F) << ( 8 - 5)) | 0x00000007); - if (c & 0x03E0) output |= (((c & 0x03E0) << (16 - 10)) | 0x00000700); - if (c & 0x7C00) output |= (((c & 0x7C00) << (24 - 15)) | 0x00070000); - if (c & 0x8000) output |= 0xFF000000; - return output; - } - case DMA2D_FMT_ARGB4444: { - register dma2d_color_t output = 0x00000000; - if (c & 0x000F) output |= (((c & 0x000F) << ( 8 - 4)) | 0x0000000F); - if (c & 0x00F0) output |= (((c & 0x00F0) << (16 - 8)) | 0x00000F00); - if (c & 0x0F00) output |= (((c & 0x0F00) << (24 - 12)) | 0x000F0000); - if (c & 0xF000) output |= (((c & 0xF000) << (32 - 16)) | 0x0F000000); - return output; - } - case DMA2D_FMT_L8: { - return (c & 0xFF) | 0xFF000000; - } - case DMA2D_FMT_AL44: { - register dma2d_color_t output = 0x00000000; - if (c & 0x0F) output |= (((c & 0x0F) << ( 8 - 4)) | 0x0000000F); - if (c & 0xF0) output |= (((c & 0xF0) << (32 - 8)) | 0x0F000000); - return output; - } - case DMA2D_FMT_AL88: { - return (((c & 0x00FF) << ( 8 - 8)) | - ((c & 0xFF00) << (32 - 16))); - } - case DMA2D_FMT_L4: { - return ((c & 0x0F) | 0xFF000000); - } - case DMA2D_FMT_A8: { - return ((c & 0xFF) << (32 - 8)); - } - case DMA2D_FMT_A4: { - return ((c & 0x0F) << (32 - 4)); - } - default: - osalDbgAssert(false, "invalid format"); - return 0; - } -} - -#endif /* DMA2D_NEED_CONVERSIONS */ - -/** @} */ - -/** @} */ - -#endif /* STM32_DMA2D_USE_DMA2D */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h deleted file mode 100644 index 01f0941..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h +++ /dev/null @@ -1,664 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file stm32_dma2d.h - * @brief DMA2D/Chrom-ART driver. - * - * @addtogroup dma2d - * @{ - */ - -#ifndef _STM32_DMA2D_H_ -#define _STM32_DMA2D_H_ - -/** - * @brief Using the DMA2D driver. - */ -#if !defined(STM32_DMA2D_USE_DMA2D) || defined(__DOXYGEN__) -#define STM32_DMA2D_USE_DMA2D (FALSE) -#endif - -#if (TRUE == STM32_DMA2D_USE_DMA2D) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name DMA2D job modes - * @{ - */ -#define DMA2D_JOB_COPY (0 << 16) /**< Copy, replace(FG only).*/ -#define DMA2D_JOB_CONVERT (1 << 16) /**< Copy, convert (FG + PFC).*/ -#define DMA2D_JOB_BLEND (2 << 16) /**< Copy, blend (FG + BG + PFC).*/ -#define DMA2D_JOB_CONST (3 << 16) /**< Default color only (FG REG).*/ -/** @} */ - -/** - * @name DMA2D enable flag - * @{ - */ -#define DMA2D_EF_ENABLE (1 << 0) /**< DMA2D enabled.*/ -#define DMA2D_EF_DITHER (1 << 16) /**< Dithering enabled.*/ -#define DMA2D_EF_PIXCLK_INVERT (1 << 28) /**< Inverted pixel clock.*/ -#define DMA2D_EF_DATAEN_HIGH (1 << 29) /**< Active-high data enable.*/ -#define DMA2D_EF_VSYNC_HIGH (1 << 30) /**< Active-high vsync.*/ -#define DMA2D_EF_HSYNC_HIGH (1 << 31) /**< Active-high hsync.*/ - -/** Enable flags mask. */ -#define DMA2D_EF_MASK \ - (DMA2D_EF_ENABLE | DMA2D_EF_DITHER | DMA2D_EF_PIXCLK_INVERT | \ - DMA2D_EF_DATAEN_HIGH | DMA2D_EF_VSYNC_HIGH | DMA2D_EF_HSYNC_HIGH) -/** @} */ - -/** - * @name DMA2D layer enable flags - * @{ - */ -#define DMA2D_LEF_ENABLE (1 << 0) /**< Layer enabled*/ -#define DMA2D_LEF_KEYING (1 << 1) /**< Color keying enabled.*/ -#define DMA2D_LEF_PALETTE (1 << 4) /**< Palette enabled.*/ - -/** Layer enable flag masks. */ -#define DMA2D_LEF_MASK \ - (DMA2D_LEF_ENABLE | DMA2D_LEF_KEYING | DMA2D_LEF_PALETTE) -/** @} */ - -/** - * @name DMA2D pixel formats - * @{ - */ -#define DMA2D_FMT_ARGB8888 (0) /**< ARGB-8888 format.*/ -#define DMA2D_FMT_RGB888 (1) /**< RGB-888 format.*/ -#define DMA2D_FMT_RGB565 (2) /**< RGB-565 format.*/ -#define DMA2D_FMT_ARGB1555 (3) /**< ARGB-1555 format.*/ -#define DMA2D_FMT_ARGB4444 (4) /**< ARGB-4444 format.*/ -#define DMA2D_FMT_L8 (5) /**< L-8 format.*/ -#define DMA2D_FMT_AL44 (6) /**< AL-44 format.*/ -#define DMA2D_FMT_AL88 (7) /**< AL-88 format.*/ -#define DMA2D_FMT_L4 (8) /**< L-4 format.*/ -#define DMA2D_FMT_A8 (9) /**< A-8 format.*/ -#define DMA2D_FMT_A4 (10) /**< A-4 format.*/ -/** @} */ - -/** - * @name DMA2D pixel format aliased raw masks - * @{ - */ -#define DMA2D_XMASK_ARGB8888 (0xFFFFFFFF) /**< ARGB-8888 aliased mask.*/ -#define DMA2D_XMASK_RGB888 (0x00FFFFFF) /**< RGB-888 aliased mask.*/ -#define DMA2D_XMASK_RGB565 (0x00F8FCF8) /**< RGB-565 aliased mask.*/ -#define DMA2D_XMASK_ARGB1555 (0x80F8F8F8) /**< ARGB-1555 aliased mask.*/ -#define DMA2D_XMASK_ARGB4444 (0xF0F0F0F0) /**< ARGB-4444 aliased mask.*/ -#define DMA2D_XMASK_L8 (0x000000FF) /**< L-8 aliased mask.*/ -#define DMA2D_XMASK_AL44 (0xF00000F0) /**< AL-44 aliased mask.*/ -#define DMA2D_XMASK_AL88 (0xFF0000FF) /**< AL-88 aliased mask.*/ -#define DMA2D_XMASK_L4 (0x0000000F) /**< L-4 aliased mask.*/ -#define DMA2D_XMASK_A8 (0xFF000000) /**< A-8 aliased mask.*/ -#define DMA2D_XMASK_A4 (0xF0000000) /**< A-4 aliased mask.*/ -/** @} */ - -/** - * @name DMA2D alpha modes - * @{ - */ -#define DMA2D_ALPHA_KEEP (0x00000000) /**< Original alpha channel.*/ -#define DMA2D_ALPHA_REPLACE (0x00010000) /**< Replace with constant.*/ -#define DMA2D_ALPHA_MODULATE (0x00020000) /**< Modulate with constant.*/ -/** @} */ - -/** - * @name DMA2D parameter bounds - * @{ - */ - -#define DMA2D_MIN_PIXFMT_ID (0) /**< Minimum pixel format ID.*/ -#define DMA2D_MAX_PIXFMT_ID (11) /**< Maximum pixel format ID.*/ -#define DMA2D_MIN_OUTPIXFMT_ID (0) /**< Minimum output pixel format ID.*/ -#define DMA2D_MAX_OUTPIXFMT_ID (4) /**< Maximum output pixel format ID.*/ - -#define DMA2D_MAX_OFFSET ((1 << 14) - 1) - -#define DMA2D_MAX_PALETTE_LENGTH (256) /***/ - -#define DMA2D_MAX_WIDTH ((1 << 14) - 1) -#define DMA2D_MAX_HEIGHT ((1 << 16) - 1) - -#define DMA2D_MAX_WATERMARK_POS ((1 << 16) - 1) - -#define DMA2D_MAX_DEADTIME_CYCLES ((1 << 8) - 1) - -/** @} */ - -/** - * @name DMA2D basic ARGB-8888 colors. - * @{ - */ -/* Microsoft Windows default 16-color palette.*/ -#define DMA2D_COLOR_BLACK (0xFF000000) -#define DMA2D_COLOR_MAROON (0xFF800000) -#define DMA2D_COLOR_GREEN (0xFF008000) -#define DMA2D_COLOR_OLIVE (0xFF808000) -#define DMA2D_COLOR_NAVY (0xFF000080) -#define DMA2D_COLOR_PURPLE (0xFF800080) -#define DMA2D_COLOR_TEAL (0xFF008080) -#define DMA2D_COLOR_SILVER (0xFFC0C0C0) -#define DMA2D_COLOR_GRAY (0xFF808080) -#define DMA2D_COLOR_RED (0xFFFF0000) -#define DMA2D_COLOR_LIME (0xFF00FF00) -#define DMA2D_COLOR_YELLOW (0xFFFFFF00) -#define DMA2D_COLOR_BLUE (0xFF0000FF) -#define DMA2D_COLOR_FUCHSIA (0xFFFF00FF) -#define DMA2D_COLOR_AQUA (0xFF00FFFF) -#define DMA2D_COLOR_WHITE (0xFFFFFFFF) -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name DMA2D configuration options - * @{ - */ - -/** - * @brief DMA2D event interrupt priority level setting. - */ -#if !defined(STM32_DMA2D_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_DMA2D_IRQ_PRIORITY (11) -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DMA2D_USE_WAIT) || defined(__DOXYGEN__) -#define DMA2D_USE_WAIT (TRUE) -#endif - -/** - * @brief Enables the @p dma2dAcquireBus() and @p dma2dReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DMA2D_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DMA2D_USE_MUTUAL_EXCLUSION (TRUE) -#endif - -/** - * @brief Provides software color conversion functions. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DMA2D_USE_SOFTWARE_CONVERSIONS) || defined(__DOXYGEN__) -#define DMA2D_USE_SOFTWARE_CONVERSIONS (TRUE) -#endif - -/** - * @brief Enables checks for DMA2D functions. - * @note Disabling this option saves both code and data space. - * @note Disabling checks by ChibiOS will automatically disable DMA2D checks. - */ -#if !defined(DMA2D_USE_CHECKS) || defined(__DOXYGEN__) -#define DMA2D_USE_CHECKS (TRUE) -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if (TRUE != STM32_HAS_DMA2D) -#error "DMA2D must be present when using the DMA2D subsystem" -#endif - -#if (TRUE != STM32_DMA2D_USE_DMA2D) && (TRUE != STM32_HAS_DMA2D) -#error "DMA2D not present in the selected device" -#endif - -#if (TRUE == DMA2D_USE_MUTUAL_EXCLUSION) -#if (TRUE != CH_CFG_USE_MUTEXES) && (TRUE != CH_CFG_USE_SEMAPHORES) -#error "DMA2D_USE_MUTUAL_EXCLUSION requires CH_CFG_USE_MUTEXES and/or CH_CFG_USE_SEMAPHORES" -#endif -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/* Complex types forwarding.*/ -typedef union dma2d_coloralias_t dma2d_coloralias_t; -typedef struct dma2d_palcfg_t dma2d_palcfg_t; -typedef struct dma2d_laycfg_t dma2d_layercfg_t; -typedef struct DMA2DConfig DMA2DConfig; -typedef enum dma2d_state_t dma2d_state_t; -typedef struct DMA2DDriver DMA2DDriver; - -/** - * @name DMA2D Data types - * @{ - */ - -/** - * @brief DMA2D generic color. - */ -typedef uint32_t dma2d_color_t; - -/** - * @brief DMA2D color aliases. - * @detail Mapped with ARGB-8888, except for luminance (L mapped onto B). - * Padding fields are prefixed with 'x', and should be clear - * (all 0) before compression and set (all 1) after expansion. - */ -typedef union dma2d_coloralias_t { - struct { - unsigned b : 8; - unsigned g : 8; - unsigned r : 8; - unsigned a : 8; - } argb8888; /**< Mapped ARGB-8888 bits.*/ - struct { - unsigned b : 8; - unsigned g : 8; - unsigned r : 8; - unsigned xa : 8; - } rgb888; /**< Mapped RGB-888 bits.*/ - struct { - unsigned xb : 3; - unsigned b : 5; - unsigned xg : 2; - unsigned g : 6; - unsigned xr : 3; - unsigned r : 5; - unsigned xa : 8; - } rgb565; /**< Mapped RGB-565 bits.*/ - struct { - unsigned xb : 3; - unsigned b : 5; - unsigned xg : 3; - unsigned g : 5; - unsigned xr : 3; - unsigned r : 5; - unsigned xa : 7; - unsigned a : 1; - } argb1555; /**< Mapped ARGB-1555 values.*/ - struct { - unsigned xb : 4; - unsigned b : 4; - unsigned xg : 4; - unsigned g : 4; - unsigned xr : 4; - unsigned r : 4; - unsigned xa : 4; - unsigned a : 4; - } argb4444; /**< Mapped ARGB-4444 values.*/ - struct { - unsigned l : 8; - unsigned x : 16; - unsigned xa : 8; - } l8; /**< Mapped L-8 bits.*/ - struct { - unsigned xl : 4; - unsigned l : 4; - unsigned x : 16; - unsigned xa : 4; - unsigned a : 4; - } al44; /**< Mapped AL-44 bits.*/ - struct { - unsigned l : 8; - unsigned x : 16; - unsigned a : 8; - } al88; /**< Mapped AL-88 bits.*/ - struct { - unsigned l : 4; - unsigned xl : 4; - unsigned x : 16; - unsigned xa : 8; - } l4; /**< Mapped L-4 bits.*/ - struct { - unsigned x : 24; - unsigned a : 8; - } a8; /**< Mapped A-8 bits.*/ - struct { - unsigned x : 24; - unsigned xa : 4; - unsigned a : 4; - } a4; /**< Mapped A-4 bits.*/ - dma2d_color_t aliased; /**< Aliased raw bits.*/ -} dma2d_coloralias_t; - -/** - * @brief DMA2D job (transfer) mode. - */ -typedef uint32_t dma2d_jobmode_t; - -/** - * @brief DMA2D pixel format. - */ -typedef uint32_t dma2d_pixfmt_t; - -/** - * @brief DMA2D alpha mode. - */ -typedef uint32_t dma2d_amode_t; - -/** - * @brief DMA2D ISR callback. - */ -typedef void (*dma2d_isrcb_t)(DMA2DDriver *dma2dp); - -/** - * @brief DMA2D palette specifications. - */ -typedef struct dma2d_palcfg_t { - const void *colorsp; /**< Pointer to color entries.*/ - uint16_t length; /**< Number of color entries.*/ - dma2d_pixfmt_t fmt; /**< Format, RGB-888 or ARGB-8888.*/ -} dma2d_palcfg_t; - -/** - * @brief DMA2D layer specifications. - */ -typedef struct dma2d_layercfg_t { - void *bufferp; /**< Frame buffer address.*/ - size_t wrap_offset; /**< Offset between lines, in pixels.*/ - dma2d_pixfmt_t fmt; /**< Pixel format.*/ - dma2d_color_t def_color; /**< Default color, RGB-888.*/ - uint8_t const_alpha; /**< Constant alpha factor.*/ - const dma2d_palcfg_t *palettep; /**< Palette specs, or @p NULL.*/ -} dma2d_laycfg_t; - -/** - * @brief DMA2D driver configuration. - */ -typedef struct DMA2DConfig { - /* ISR callbacks.*/ - dma2d_isrcb_t cfgerr_isr; /**< Configuration error, or @p NULL.*/ - dma2d_isrcb_t paltrfdone_isr; /**< Palette transfer done, or @p NULL.*/ - dma2d_isrcb_t palacserr_isr; /**< Palette access error, or @p NULL.*/ - dma2d_isrcb_t trfwmark_isr; /**< Transfer watermark, or @p NULL.*/ - dma2d_isrcb_t trfdone_isr; /**< Transfer complete, or @p NULL.*/ - dma2d_isrcb_t trferr_isr; /**< Transfer error, or @p NULL.*/ -} DMA2DConfig; - -/** - * @brief DMA2D driver state. - */ -typedef enum dma2d_state_t { - DMA2D_UNINIT = (0), /**< Not initialized.*/ - DMA2D_STOP = (1), /**< Stopped.*/ - DMA2D_READY = (2), /**< Ready.*/ - DMA2D_ACTIVE = (3), /**< Executing commands.*/ - DMA2D_PAUSED = (4), /**< Transfer suspended.*/ -} dma2d_state_t; - -/** - * @brief DMA2D driver. - */ -typedef struct DMA2DDriver { - dma2d_state_t state; /**< Driver state.*/ - const DMA2DConfig *config; /**< Driver configuration.*/ - - /* Multithreading stuff.*/ -#if (TRUE == DMA2D_USE_WAIT) || defined(__DOXYGEN__) - thread_t *thread; /**< Waiting thread.*/ -#endif /* DMA2D_USE_WAIT */ -#if (TRUE == DMA2D_USE_MUTUAL_EXCLUSION) -#if (TRUE == CH_CFG_USE_MUTEXES) - mutex_t lock; /**< Multithreading lock.*/ -#elif (TRUE == CH_CFG_USE_SEMAPHORES) - semaphore_t lock; /**< Multithreading lock.*/ -#endif -#endif /* DMA2D_USE_MUTUAL_EXCLUSION */ -} DMA2DDriver; - -/** @} */ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Makes an ARGB-8888 value from byte components. - * - * @param[in] a alpha byte component - * @param[in] r red byte component - * @param[in] g green byte component - * @param[in] b blue byte component - * - * @return color in ARGB-8888 format - * - * @api - */ -#define dma2dMakeARGB8888(a, r, g, b) \ - ((((dma2d_color_t)(a) & 0xFF) << 24) | \ - (((dma2d_color_t)(r) & 0xFF) << 16) | \ - (((dma2d_color_t)(g) & 0xFF) << 8) | \ - (((dma2d_color_t)(b) & 0xFF) << 0)) - -/** - * @brief Compute bytes per pixel. - * @details Computes the bytes per pixel for the specified pixel format. - * Rounds to the ceiling. - * - * @param[in] fmt pixel format - * - * @return bytes per pixel - * - * @api - */ -#define dma2dBytesPerPixel(fmt) \ - ((dma2dBitsPerPixel(fmt) + 7) >> 3) - -/** - * @brief Compute pixel address. - * @details Computes the buffer address of a pixel, given the buffer - * specifications. - * - * @param[in] originp buffer origin address - * @param[in] pitch buffer pitch, in bytes - * @param[in] fmt buffer pixel format - * @param[in] x horizontal pixel coordinate - * @param[in] y vertical pixel coordinate - * - * @return pixel address - * - * @api - */ -#define dma2dComputeAddress(originp, pitch, fmt, x, y) \ - ((void *)dma2dComputeAddressConst(originp, pitch, fmt, x, y)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern DMA2DDriver DMA2DD1; - -#ifdef __cplusplus -extern "C" { -#endif - - /* Driver methods.*/ - void dma2dInit(void); - void dma2dObjectInit(DMA2DDriver *dma2dp); - dma2d_state_t dma2dGetStateI(DMA2DDriver *dma2dp); - dma2d_state_t dma2dGetState(DMA2DDriver *dma2dp); - void dma2dStart(DMA2DDriver *dma2dp, const DMA2DConfig *configp); - void dma2dStop(DMA2DDriver *dma2dp); -#if (TRUE == DMA2D_USE_MUTUAL_EXCLUSION) - void dma2dAcquireBusS(DMA2DDriver *dma2dp); - void dma2dAcquireBus(DMA2DDriver *dma2dp); - void dma2dReleaseBusS(DMA2DDriver *dma2dp); - void dma2dReleaseBus(DMA2DDriver *dma2dp); -#endif /* DMA2D_USE_MUTUAL_EXCLUSION */ - - /* Global methods.*/ - uint16_t dma2dGetWatermarkPosI(DMA2DDriver *dma2dp); - uint16_t dma2dGetWatermarkPos(DMA2DDriver *dma2dp); - void dma2dSetWatermarkPosI(DMA2DDriver *dma2dp, uint16_t line); - void dma2dSetWatermarkPos(DMA2DDriver *dma2dp, uint16_t line); - bool dma2dIsWatermarkEnabledI(DMA2DDriver *dma2dp); - bool dma2dIsWatermarkEnabled(DMA2DDriver *dma2dp); - void dma2dEnableWatermarkI(DMA2DDriver *dma2dp); - void dma2dEnableWatermark(DMA2DDriver *dma2dp); - void dma2dDisableWatermarkI(DMA2DDriver *dma2dp); - void dma2dDisableWatermark(DMA2DDriver *dma2dp); - uint32_t dma2dGetDeadTimeI(DMA2DDriver *dma2dp); - uint32_t dma2dGetDeadTime(DMA2DDriver *dma2dp); - void dma2dSetDeadTimeI(DMA2DDriver *dma2dp, uint32_t cycles); - void dma2dSetDeadTime(DMA2DDriver *dma2dp, uint32_t cycles); - bool dma2dIsDeadTimeEnabledI(DMA2DDriver *dma2dp); - bool dma2dIsDeadTimeEnabled(DMA2DDriver *dma2dp); - void dma2dEnableDeadTimeI(DMA2DDriver *dma2dp); - void dma2dEnableDeadTime(DMA2DDriver *dma2dp); - void dma2dDisableDeadTimeI(DMA2DDriver *dma2dp); - void dma2dDisableDeadTime(DMA2DDriver *dma2dp); - - /* Job methods.*/ - dma2d_jobmode_t dma2dJobGetModeI(DMA2DDriver *dma2dp); - dma2d_jobmode_t dma2dJobGetMode(DMA2DDriver *dma2dp); - void dma2dJobSetModeI(DMA2DDriver *dma2dp, dma2d_jobmode_t mode); - void dma2dJobSetMode(DMA2DDriver *dma2dp, dma2d_jobmode_t mode); - void dma2dJobGetSizeI(DMA2DDriver *dma2dp, - uint16_t *widthp, uint16_t *heightp); - void dma2dJobGetSize(DMA2DDriver *dma2dp, - uint16_t *widthp, uint16_t *heightp); - void dma2dJobSetSizeI(DMA2DDriver *dma2dp, uint16_t width, uint16_t height); - void dma2dJobSetSize(DMA2DDriver *dma2dp, uint16_t width, uint16_t height); - bool dma2dJobIsExecutingI(DMA2DDriver *dma2dp); - bool dma2dJobIsExecuting(DMA2DDriver *dma2dp); - void dma2dJobStartI(DMA2DDriver *dma2dp); - void dma2dJobStart(DMA2DDriver *dma2dp); - void dma2dJobExecuteS(DMA2DDriver *dma2dp); - void dma2dJobExecute(DMA2DDriver *dma2dp); - void dma2dJobSuspendI(DMA2DDriver *dma2dp); - void dma2dJobSuspend(DMA2DDriver *dma2dp); - void dma2dJobResumeI(DMA2DDriver *dma2dp); - void dma2dJobResume(DMA2DDriver *dma2dp); - void dma2dJobAbortI(DMA2DDriver *dma2dp); - void dma2dJobAbort(DMA2DDriver *dma2dp); - - /* Background layer methods.*/ - void *dma2dBgGetAddressI(DMA2DDriver *dma2dp); - void *dma2dBgGetAddress(DMA2DDriver *dma2dp); - void dma2dBgSetAddressI(DMA2DDriver *dma2dp, void *bufferp); - void dma2dBgSetAddress(DMA2DDriver *dma2dp, void *bufferp); - size_t dma2dBgGetWrapOffsetI(DMA2DDriver *dma2dp); - size_t dma2dBgGetWrapOffset(DMA2DDriver *dma2dp); - void dma2dBgSetWrapOffsetI(DMA2DDriver *dma2dp, size_t offset); - void dma2dBgSetWrapOffset(DMA2DDriver *dma2dp, size_t offset); - uint8_t dma2dBgGetConstantAlphaI(DMA2DDriver *dma2dp); - uint8_t dma2dBgGetConstantAlpha(DMA2DDriver *dma2dp); - void dma2dBgSetConstantAlphaI(DMA2DDriver *dma2dp, uint8_t a); - void dma2dBgSetConstantAlpha(DMA2DDriver *dma2dp, uint8_t a); - dma2d_amode_t dma2dBgGetAlphaModeI(DMA2DDriver *dma2dp); - dma2d_amode_t dma2dBgGetAlphaMode(DMA2DDriver *dma2dp); - void dma2dBgSetAlphaModeI(DMA2DDriver *dma2dp, dma2d_amode_t mode); - void dma2dBgSetAlphaMode(DMA2DDriver *dma2dp, dma2d_amode_t mode); - dma2d_pixfmt_t dma2dBgGetPixelFormatI(DMA2DDriver *dma2dp); - dma2d_pixfmt_t dma2dBgGetPixelFormat(DMA2DDriver *dma2dp); - void dma2dBgSetPixelFormatI(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt); - void dma2dBgSetPixelFormat(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt); - dma2d_color_t dma2dBgGetDefaultColorI(DMA2DDriver *dma2dp); - dma2d_color_t dma2dBgGetDefaultColor(DMA2DDriver *dma2dp); - void dma2dBgSetDefaultColorI(DMA2DDriver *dma2dp, dma2d_color_t c); - void dma2dBgSetDefaultColor(DMA2DDriver *dma2dp, dma2d_color_t c); - void dma2dBgGetPaletteI(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep); - void dma2dBgGetPalette(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep); - void dma2dBgSetPaletteS(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep); - void dma2dBgSetPalette(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep); - void dma2dBgGetLayerI(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp); - void dma2dBgGetLayer(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp); - void dma2dBgSetConfigS(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp); - void dma2dBgSetConfig(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp); - - /* Foreground layer methods.*/ - void *dma2dFgGetAddressI(DMA2DDriver *dma2dp); - void *dma2dFgGetAddress(DMA2DDriver *dma2dp); - void dma2dFgSetAddressI(DMA2DDriver *dma2dp, void *bufferp); - void dma2dFgSetAddress(DMA2DDriver *dma2dp, void *bufferp); - size_t dma2dFgGetWrapOffsetI(DMA2DDriver *dma2dp); - size_t dma2dFgGetWrapOffset(DMA2DDriver *dma2dp); - void dma2dFgSetWrapOffsetI(DMA2DDriver *dma2dp, size_t offset); - void dma2dFgSetWrapOffset(DMA2DDriver *dma2dp, size_t offset); - uint8_t dma2dFgGetConstantAlphaI(DMA2DDriver *dma2dp); - uint8_t dma2dFgGetConstantAlpha(DMA2DDriver *dma2dp); - void dma2dFgSetConstantAlphaI(DMA2DDriver *dma2dp, uint8_t a); - void dma2dFgSetConstantAlpha(DMA2DDriver *dma2dp, uint8_t a); - dma2d_amode_t dma2dFgGetAlphaModeI(DMA2DDriver *dma2dp); - dma2d_amode_t dma2dFgGetAlphaMode(DMA2DDriver *dma2dp); - void dma2dFgSetAlphaModeI(DMA2DDriver *dma2dp, dma2d_amode_t mode); - void dma2dFgSetAlphaMode(DMA2DDriver *dma2dp, dma2d_amode_t mode); - dma2d_pixfmt_t dma2dFgGetPixelFormatI(DMA2DDriver *dma2dp); - dma2d_pixfmt_t dma2dFgGetPixelFormat(DMA2DDriver *dma2dp); - void dma2dFgSetPixelFormatI(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt); - void dma2dFgSetPixelFormat(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt); - dma2d_color_t dma2dFgGetDefaultColorI(DMA2DDriver *dma2dp); - dma2d_color_t dma2dFgGetDefaultColor(DMA2DDriver *dma2dp); - void dma2dFgSetDefaultColorI(DMA2DDriver *dma2dp, dma2d_color_t c); - void dma2dFgSetDefaultColor(DMA2DDriver *dma2dp, dma2d_color_t c); - void dma2dFgGetPaletteI(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep); - void dma2dFgGetPalette(DMA2DDriver *dma2dp, dma2d_palcfg_t *palettep); - void dma2dFgSetPaletteS(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep); - void dma2dFgSetPalette(DMA2DDriver *dma2dp, const dma2d_palcfg_t *palettep); - void dma2dFgGetLayerI(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp); - void dma2dFgGetLayer(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp); - void dma2dFgSetConfigS(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp); - void dma2dFgSetConfig(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp); - - /* Output layer methods.*/ - void *dma2dOutGetAddressI(DMA2DDriver *dma2dp); - void *dma2dOutGetAddress(DMA2DDriver *dma2dp); - void dma2dOutSetAddressI(DMA2DDriver *dma2dp, void *bufferp); - void dma2dOutSetAddress(DMA2DDriver *dma2dp, void *bufferp); - size_t dma2dOutGetWrapOffsetI(DMA2DDriver *dma2dp); - size_t dma2dOutGetWrapOffset(DMA2DDriver *dma2dp); - void dma2dOutSetWrapOffsetI(DMA2DDriver *dma2dp, size_t offset); - void dma2dOutSetWrapOffset(DMA2DDriver *dma2dp, size_t offset); - dma2d_pixfmt_t dma2dOutGetPixelFormatI(DMA2DDriver *dma2dp); - dma2d_pixfmt_t dma2dOutGetPixelFormat(DMA2DDriver *dma2dp); - void dma2dOutSetPixelFormatI(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt); - void dma2dOutSetPixelFormat(DMA2DDriver *dma2dp, dma2d_pixfmt_t fmt); - dma2d_color_t dma2dOutGetDefaultColorI(DMA2DDriver *dma2dp); - dma2d_color_t dma2dOutGetDefaultColor(DMA2DDriver *dma2dp); - void dma2dOutSetDefaultColorI(DMA2DDriver *dma2dp, dma2d_color_t c); - void dma2dOutSetDefaultColor(DMA2DDriver *dma2dp, dma2d_color_t c); - void dma2dOutGetLayerI(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp); - void dma2dOutGetLayer(DMA2DDriver *dma2dp, dma2d_laycfg_t *cfgp); - void dma2dOutSetConfigI(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp); - void dma2dOutSetConfig(DMA2DDriver *dma2dp, const dma2d_laycfg_t *cfgp); - - /* Helper functions.*/ - const void *dma2dComputeAddressConst(const void *originp, size_t pitch, - dma2d_pixfmt_t fmt, - uint16_t x, uint16_t y); - bool dma2dIsAligned(const void *bufferp, dma2d_pixfmt_t fmt); - size_t dma2dBitsPerPixel(dma2d_pixfmt_t fmt); -#if (TRUE == DMA2D_USE_SOFTWARE_CONVERSIONS) || defined(__DOXYGEN__) - dma2d_color_t dma2dFromARGB8888(dma2d_color_t c, dma2d_pixfmt_t fmt); - dma2d_color_t dma2dToARGB8888(dma2d_color_t c, dma2d_pixfmt_t fmt); -#endif /* DMA2D_USE_SOFTWARE_CONVERSIONS */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32_DMA2D_USE_DMA2D */ - -#endif /* _STM32_DMA2D_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c deleted file mode 100644 index 8b1082c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file fsmc.c - * @brief FSMC Driver subsystem low level driver source template. - * - * @addtogroup FSMC - * @{ - */ -#include "hal.h" -#include "hal_fsmc.h" - -#if (HAL_USE_FSMC == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief FSMC1 driver identifier. - */ -#if STM32_FSMC_USE_FSMC1 || defined(__DOXYGEN__) -FSMCDriver FSMCD1; -#endif - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level FSMC driver initialization. - * - * @notapi - */ -void fsmc_init(void) { - - if (FSMCD1.state == FSMC_UNINIT) { - FSMCD1.state = FSMC_STOP; - -#if STM32_SRAM_USE_FSMC_SRAM1 - FSMCD1.sram1 = (FSMC_SRAM_NOR_TypeDef *)(FSMC_Bank1_R_BASE); -#endif - -#if STM32_SRAM_USE_FSMC_SRAM2 - FSMCD1.sram2 = (FSMC_SRAM_NOR_TypeDef *)(FSMC_Bank1_R_BASE + 8); -#endif - -#if STM32_SRAM_USE_FSMC_SRAM3 - FSMCD1.sram3 = (FSMC_SRAM_NOR_TypeDef *)(FSMC_Bank1_R_BASE + 8 * 2); -#endif - -#if STM32_SRAM_USE_FSMC_SRAM4 - FSMCD1.sram4 = (FSMC_SRAM_NOR_TypeDef *)(FSMC_Bank1_R_BASE + 8 * 3); -#endif - -#if STM32_NAND_USE_FSMC_NAND1 - FSMCD1.nand1 = (FSMC_NAND_TypeDef *)FSMC_Bank2_R_BASE; -#endif - -#if STM32_NAND_USE_FSMC_NAND2 - FSMCD1.nand2 = (FSMC_NAND_TypeDef *)FSMC_Bank3_R_BASE; -#endif - -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - #if STM32_USE_FSMC_SDRAM - FSMCD1.sdram = (FSMC_SDRAM_TypeDef *)FSMC_Bank5_6_R_BASE; - #endif -#endif - } -} - -/** - * @brief Configures and activates the FSMC peripheral. - * - * @param[in] fsmcp pointer to the @p FSMCDriver object - * - * @notapi - */ -void fsmc_start(FSMCDriver *fsmcp) { - - osalDbgAssert((fsmcp->state == FSMC_STOP) || (fsmcp->state == FSMC_READY), - "invalid state"); - - if (fsmcp->state == FSMC_STOP) { - /* Enables the peripheral.*/ -#if STM32_FSMC_USE_FSMC1 - if (&FSMCD1 == fsmcp) { -#ifdef rccResetFSMC - rccResetFSMC(); -#endif - rccEnableFSMC(FALSE); -#if (!STM32_NAND_USE_EXT_INT && HAL_USE_NAND) - nvicEnableVector(STM32_FSMC_NUMBER, STM32_FSMC_FSMC1_IRQ_PRIORITY); -#endif - } -#endif /* STM32_FSMC_USE_FSMC1 */ - - fsmcp->state = FSMC_READY; - } -} - -/** - * @brief Deactivates the FSMC peripheral. - * - * @param[in] emcp pointer to the @p FSMCDriver object - * - * @notapi - */ -void fsmc_stop(FSMCDriver *fsmcp) { - - if (fsmcp->state == FSMC_READY) { - /* Resets the peripheral.*/ -#ifdef rccResetFSMC - rccResetFSMC(); -#endif - - /* Disables the peripheral.*/ -#if STM32_FSMC_USE_FSMC1 - if (&FSMCD1 == fsmcp) { -#if (!STM32_NAND_USE_EXT_INT && HAL_USE_NAND) - nvicDisableVector(STM32_FSMC_NUMBER); -#endif - rccDisableFSMC(FALSE); - } -#endif /* STM32_FSMC_USE_FSMC1 */ - - fsmcp->state = FSMC_STOP; - } -} - -#if !STM32_NAND_USE_EXT_INT -/** - * @brief FSMC shared interrupt handler. - * - * @notapi - */ -CH_IRQ_HANDLER(STM32_FSMC_HANDLER) { - - CH_IRQ_PROLOGUE(); -#if STM32_NAND_USE_FSMC_NAND1 - if (FSMCD1.nand1->SR & FSMC_SR_ISR_MASK) { - NANDD1.isr_handler(&NANDD1); - } -#endif -#if STM32_NAND_USE_FSMC_NAND2 - if (FSMCD1.nand2->SR & FSMC_SR_ISR_MASK) { - NANDD2.isr_handler(&NANDD2); - } -#endif - CH_IRQ_EPILOGUE(); -} -#endif /* !STM32_NAND_USE_EXT_INT */ - -#endif /* HAL_USE_FSMC */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h deleted file mode 100644 index 7889b01..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h +++ /dev/null @@ -1,339 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file fsmc.h - * @brief FSMC Driver subsystem low level driver header. - * - * @addtogroup FSMC - * @{ - */ - -#ifndef _FSMC_H_ -#define _FSMC_H_ - -#if (HAL_USE_FSMC == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * (Re)define if needed base address constants supplied in ST's CMSIS - */ -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - #if !defined(FSMC_Bank1_R_BASE) - #define FSMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) - #endif - #if !defined(FSMC_Bank1E_R_BASE) - #define FSMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104) - #endif - #if !defined(FSMC_Bank2_R_BASE) - #define FSMC_Bank2_R_BASE (FMC_R_BASE + 0x0060) - #endif - #if !defined(FSMC_Bank3_R_BASE) - #define FSMC_Bank3_R_BASE (FMC_R_BASE + 0x0080) - #endif - #if !defined(FSMC_Bank4_R_BASE) - #define FSMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0) - #endif - #if !defined(FSMC_Bank5_R_BASE) - #define FSMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140) - #endif -#else - #if !defined(FSMC_Bank1_R_BASE) - #define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) - #endif - #if !defined(FSMC_Bank1E_R_BASE) - #define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) - #endif - #if !defined(FSMC_Bank2_R_BASE) - #define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) - #endif - #if !defined(FSMC_Bank3_R_BASE) - #define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) - #endif - #if !defined(FSMC_Bank4_R_BASE) - #define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) - #endif -#endif - -/* - * Base bank mappings - */ -#define FSMC_Bank1_MAP_BASE ((uint32_t) 0x60000000) -#define FSMC_Bank2_MAP_BASE ((uint32_t) 0x70000000) -#define FSMC_Bank3_MAP_BASE ((uint32_t) 0x80000000) -#define FSMC_Bank4_MAP_BASE ((uint32_t) 0x90000000) -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - #define FSMC_Bank5_MAP_BASE ((uint32_t) 0xC0000000) - #define FSMC_Bank6_MAP_BASE ((uint32_t) 0xD0000000) -#endif - -/* - * Subbunks of bank1 - */ -#define FSMC_SUBBUNK_OFFSET (1024 * 1024 * 64) -#define FSMC_Bank1_1_MAP (FSMC_Bank1_MAP_BASE) -#define FSMC_Bank1_2_MAP (FSMC_Bank1_1_MAP + FSMC_SUBBUNK_OFFSET) -#define FSMC_Bank1_3_MAP (FSMC_Bank1_2_MAP + FSMC_SUBBUNK_OFFSET) -#define FSMC_Bank1_4_MAP (FSMC_Bank1_3_MAP + FSMC_SUBBUNK_OFFSET) - -/* - * Bank 2 (NAND) - */ -#define FSMC_Bank2_MAP_COMMON (FSMC_Bank2_MAP_BASE + 0) -#define FSMC_Bank2_MAP_ATTR (FSMC_Bank2_MAP_BASE + 0x8000000) - -#define FSMC_Bank2_MAP_COMMON_DATA (FSMC_Bank2_MAP_COMMON + 0) -#define FSMC_Bank2_MAP_COMMON_CMD (FSMC_Bank2_MAP_COMMON + 0x10000) -#define FSMC_Bank2_MAP_COMMON_ADDR (FSMC_Bank2_MAP_COMMON + 0x20000) - -#define FSMC_Bank2_MAP_ATTR_DATA (FSMC_Bank2_MAP_ATTR + 0) -#define FSMC_Bank2_MAP_ATTR_CMD (FSMC_Bank2_MAP_ATTR + 0x10000) -#define FSMC_Bank2_MAP_ATTR_ADDR (FSMC_Bank2_MAP_ATTR + 0x20000) - -/* - * Bank 3 (NAND) - */ -#define FSMC_Bank3_MAP_COMMON (FSMC_Bank3_MAP_BASE + 0) -#define FSMC_Bank3_MAP_ATTR (FSMC_Bank3_MAP_BASE + 0x8000000) - -#define FSMC_Bank3_MAP_COMMON_DATA (FSMC_Bank3_MAP_COMMON + 0) -#define FSMC_Bank3_MAP_COMMON_CMD (FSMC_Bank3_MAP_COMMON + 0x10000) -#define FSMC_Bank3_MAP_COMMON_ADDR (FSMC_Bank3_MAP_COMMON + 0x20000) - -#define FSMC_Bank3_MAP_ATTR_DATA (FSMC_Bank3_MAP_ATTR + 0) -#define FSMC_Bank3_MAP_ATTR_CMD (FSMC_Bank3_MAP_ATTR + 0x10000) -#define FSMC_Bank3_MAP_ATTR_ADDR (FSMC_Bank3_MAP_ATTR + 0x20000) - -/* - * Bank 4 (PC card) - */ -#define FSMC_Bank4_MAP_COMMON (FSMC_Bank4_MAP_BASE + 0) -#define FSMC_Bank4_MAP_ATTR (FSMC_Bank4_MAP_BASE + 0x8000000) -#define FSMC_Bank4_MAP_IO (FSMC_Bank4_MAP_BASE + 0xC000000) - -/* - * More convenient typedefs than CMSIS has - */ -typedef struct { - __IO uint32_t PCR; /**< NAND Flash control */ - __IO uint32_t SR; /**< NAND Flash FIFO status and interrupt */ - __IO uint32_t PMEM; /**< NAND Flash Common memory space timing */ - __IO uint32_t PATT; /**< NAND Flash Attribute memory space timing */ - uint32_t RESERVED0; /**< Reserved, 0x70 */ - __IO uint32_t ECCR; /**< NAND Flash ECC result registers */ -} FSMC_NAND_TypeDef; - -typedef struct { - __IO uint32_t PCR; /**< PC Card control */ - __IO uint32_t SR; /**< PC Card FIFO status and interrupt */ - __IO uint32_t PMEM; /**< PC Card Common memory space timing */ - __IO uint32_t PATT; /**< PC Card Attribute memory space timing */ - __IO uint32_t PIO; /**< PC Card I/O space timing */ -} FSMC_PCCard_TypeDef; - -typedef struct { - __IO uint32_t BCR; /**< SRAM/NOR chip-select control registers */ - __IO uint32_t BTR; /**< SRAM/NOR chip-select timing registers */ - uint32_t RESERVED[63]; /**< Reserved */ - __IO uint32_t BWTR; /**< SRAM/NOR write timing registers */ -} FSMC_SRAM_NOR_TypeDef; - -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - -typedef struct { - __IO uint32_t SDCR1; /**< SDRAM control register (bank 1) */ - __IO uint32_t SDCR2; /**< SDRAM control register (bank 2) */ - __IO uint32_t SDTR1; /**< SDRAM timing register (bank 1) */ - __IO uint32_t SDTR2; /**< SDRAM timing register (bank 2) */ - __IO uint32_t SDCMR; /**< SDRAM comand mode register */ - __IO uint32_t SDRTR; /**< SDRAM refresh timer register */ - __IO uint32_t SDSR; /**< SDRAM status register */ -} FSMC_SDRAM_TypeDef; - -#endif - -/** - * @brief PCR register - */ -#define FSMC_PCR_PWAITEN ((uint32_t)0x00000002) -#define FSMC_PCR_PBKEN ((uint32_t)0x00000004) -#define FSMC_PCR_PTYP ((uint32_t)0x00000008) -#define FSMC_PCR_ECCEN ((uint32_t)0x00000040) -#define FSMC_PCR_PTYP_PCCARD 0 -#define FSMC_PCR_PTYP_NAND FSMC_PCR_PTYP - -/** - * @brief SR register - */ -#define FSMC_SR_IRS ((uint8_t)0x01) -#define FSMC_SR_ILS ((uint8_t)0x02) -#define FSMC_SR_IFS ((uint8_t)0x04) -#define FSMC_SR_IREN ((uint8_t)0x08) -#define FSMC_SR_ILEN ((uint8_t)0x10) -#define FSMC_SR_IFEN ((uint8_t)0x20) -#define FSMC_SR_FEMPT ((uint8_t)0x40) -#define FSMC_SR_ISR_MASK (FSMC_SR_IRS | FSMC_SR_ILS | FSMC_SR_IFS) - -/** - * @brief BCR register - */ -#define FSMC_BCR_MBKEN ((uint32_t)1 << 0) -#define FSMC_BCR_MUXEN ((uint32_t)1 << 1) -#define FSMC_BCR_MTYP_SRAM ((uint32_t)0 << 2) -#define FSMC_BCR_MTYP_PSRAM ((uint32_t)1 << 2) -#define FSMC_BCR_MTYP_NOR_NAND ((uint32_t)2 << 2) -#define FSMC_BCR_MTYP_RESERVED ((uint32_t)3 << 2) -#define FSMC_BCR_MWID_8 ((uint32_t)0 << 4) -#define FSMC_BCR_MWID_16 ((uint32_t)1 << 4) -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) -#define FSMC_BCR_MWID_32 ((uint32_t)2 << 4) -#else -#define FSMC_BCR_MWID_RESERVED1 ((uint32_t)2 << 4) -#endif -#define FSMC_BCR_MWID_RESERVED2 ((uint32_t)3 << 4) -#define FSMC_BCR_FACCEN ((uint32_t)1 << 6) -#define FSMC_BCR_BURSTEN ((uint32_t)1 << 8) -#define FSMC_BCR_WAITPOL ((uint32_t)1 << 9) -#define FSMC_BCR_WRAPMOD ((uint32_t)1 << 10) -#define FSMC_BCR_WAITCFG ((uint32_t)1 << 11) -#define FSMC_BCR_WREN ((uint32_t)1 << 12) -#define FSMC_BCR_WAITEN ((uint32_t)1 << 13) -#define FSMC_BCR_EXTMOD ((uint32_t)1 << 14) -#define FSMC_BCR_ASYNCWAIT ((uint32_t)1 << 15) -#define FSMC_BCR_CBURSTRW ((uint32_t)1 << 19) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief FSMC driver enable switch. - * @details If set to @p TRUE the support for FSMC is included. - */ -#if !defined(STM32_FSMC_USE_FSMC1) || defined(__DOXYGEN__) -#define STM32_FSMC_USE_FSMC1 FALSE -#endif - -/** - * @brief Internal FSMC interrupt enable switch - * @details MCUs in 100-pin package has no dedicated interrupt pin for FSMC. - * You have to use EXTI module instead to workaround this issue. - */ -#if !defined(STM32_NAND_USE_EXT_INT) || defined(__DOXYGEN__) -#define STM32_NAND_USE_EXT_INT FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ -#if !STM32_FSMC_USE_FSMC1 -#error "FSMC driver activated but no FSMC peripheral assigned" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an FSMC driver. - */ -typedef struct FSMCDriver FSMCDriver; - -/** - * @brief Driver state machine possible states. - */ -typedef enum { - FSMC_UNINIT = 0, /**< Not initialized. */ - FSMC_STOP = 1, /**< Stopped. */ - FSMC_READY = 2, /**< Ready. */ -} fsmcstate_t; - -/** - * @brief Structure representing an FSMC driver. - */ -struct FSMCDriver { - /** - * @brief Driver state. - */ - fsmcstate_t state; - /* End of the mandatory fields.*/ - -#if STM32_SRAM_USE_FSMC_SRAM1 - FSMC_SRAM_NOR_TypeDef *sram1; -#endif -#if STM32_SRAM_USE_FSMC_SRAM2 - FSMC_SRAM_NOR_TypeDef *sram2; -#endif -#if STM32_SRAM_USE_FSMC_SRAM3 - FSMC_SRAM_NOR_TypeDef *sram3; -#endif -#if STM32_SRAM_USE_FSMC_SRAM4 - FSMC_SRAM_NOR_TypeDef *sram4; -#endif -#if STM32_NAND_USE_FSMC_NAND1 - FSMC_NAND_TypeDef *nand1; -#endif -#if STM32_NAND_USE_FSMC_NAND2 - FSMC_NAND_TypeDef *nand2; -#endif -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - #if STM32_USE_FSMC_SDRAM - FSMC_SDRAM_TypeDef *sdram; - #endif -#endif -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_FSMC_USE_FSMC1 && !defined(__DOXYGEN__) -extern FSMCDriver FSMCD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void fsmc_init(void); - void fsmc_start(FSMCDriver *fsmcp); - void fsmc_stop(FSMCDriver *fsmcp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_FSMC */ - -#endif /* _FSMC_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c deleted file mode 100644 index 95f47d5..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - SDRAM routines added by Nick Klimov aka progfin. - */ - -/** - * @file fsmc_sdram.c - * @brief SDRAM Driver subsystem low level driver source. - * - * @addtogroup SDRAM - * @{ - */ - -#include "hal.h" - -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - -#if (STM32_USE_FSMC_SDRAM == TRUE) || defined(__DOXYGEN__) - -#include "hal_fsmc_sdram.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * FMC_Command_Mode - */ -#define FMCCM_NORMAL ((uint32_t)0x00000000) -#define FMCCM_CLK_ENABLED ((uint32_t)0x00000001) -#define FMCCM_PALL ((uint32_t)0x00000002) -#define FMCCM_AUTO_REFRESH ((uint32_t)0x00000003) -#define FMCCM_LOAD_MODE ((uint32_t)0x00000004) -#define FMCCM_SELFREFRESH ((uint32_t)0x00000005) -#define FMCCM_POWER_DOWN ((uint32_t)0x00000006) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ -/** - * @brief SDRAM driver identifier. - */ -SDRAMDriver SDRAMD; - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Wait until the SDRAM controller is ready. - * - * @notapi - */ -static void _sdram_wait_ready(void) { - /* Wait until the SDRAM controller is ready */ - while (SDRAMD.sdram->SDSR & FMC_SDSR_BUSY); -} - -/** - * @brief Executes the SDRAM memory initialization sequence. - * - * @param[in] cfgp pointer to the @p SDRAMConfig object - * - * @notapi - */ -static void _sdram_init_sequence(const SDRAMConfig *cfgp) { - - uint32_t command_target = 0; - -#if STM32_SDRAM_USE_FSMC_SDRAM1 - command_target |= FMC_SDCMR_CTB1; -#endif -#if STM32_SDRAM_USE_FSMC_SDRAM2 - command_target |= FMC_SDCMR_CTB2; -#endif - - /* Step 3: Configure a clock configuration enable command.*/ - _sdram_wait_ready(); - SDRAMD.sdram->SDCMR = FMCCM_CLK_ENABLED | command_target; - - /* Step 4: Insert delay (tipically 100uS).*/ - osalThreadSleepMilliseconds(1); - - /* Step 5: Configure a PALL (precharge all) command.*/ - _sdram_wait_ready(); - SDRAMD.sdram->SDCMR = FMCCM_PALL | command_target; - - /* Step 6.1: Configure a Auto-Refresh command: send the first command.*/ - _sdram_wait_ready(); - SDRAMD.sdram->SDCMR = FMCCM_AUTO_REFRESH | command_target | - (cfgp->sdcmr & FMC_SDCMR_NRFS); - - /* Step 6.2: Send the second command.*/ - _sdram_wait_ready(); - SDRAMD.sdram->SDCMR = FMCCM_AUTO_REFRESH | command_target | - (cfgp->sdcmr & FMC_SDCMR_NRFS); - - /* Step 7: Program the external memory mode register.*/ - _sdram_wait_ready(); - SDRAMD.sdram->SDCMR = FMCCM_LOAD_MODE | command_target | - (cfgp->sdcmr & FMC_SDCMR_MRD); - - /* Step 8: Set clock.*/ - _sdram_wait_ready(); - SDRAMD.sdram->SDRTR = cfgp->sdrtr & FMC_SDRTR_COUNT; - - _sdram_wait_ready(); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level SDRAM driver initialization. - */ -void fsmcSdramInit(void) { - - fsmc_init(); - - SDRAMD.sdram = FSMCD1.sdram; - SDRAMD.state = SDRAM_STOP; -} - -/** - * @brief Configures and activates the SDRAM peripheral. - * - * @param[in] sdramp pointer to the @p SDRAMDriver object - * @param[in] cfgp pointer to the @p SDRAMConfig object - */ -void fsmcSdramStart(SDRAMDriver *sdramp, const SDRAMConfig *cfgp) { - - if (FSMCD1.state == FSMC_STOP) - fsmc_start(&FSMCD1); - - osalDbgAssert((sdramp->state == SDRAM_STOP) || (sdramp->state == SDRAM_READY), - "SDRAM. Invalid state."); - - if (sdramp->state == SDRAM_STOP) { - - /* Even if you need only bank2 you must properly set up SDCR and SDTR - regitsters for bank1 too. Both banks will be tuned equally assuming - connected memory ICs are equal.*/ - sdramp->sdram->SDCR1 = cfgp->sdcr; - sdramp->sdram->SDTR1 = cfgp->sdtr; - sdramp->sdram->SDCR2 = cfgp->sdcr; - sdramp->sdram->SDTR2 = cfgp->sdtr; - - _sdram_init_sequence(cfgp); - - sdramp->state = SDRAM_READY; - } -} - -/** - * @brief Deactivates the SDRAM peripheral. - * - * @param[in] sdramp pointer to the @p SDRAMDriver object - * - * @notapi - */ -void fsmcSdramStop(SDRAMDriver *sdramp) { - - uint32_t command_target = 0; - -#if STM32_SDRAM_USE_FSMC_SDRAM1 - command_target |= FMC_SDCMR_CTB1; -#endif -#if STM32_SDRAM_USE_FSMC_SDRAM2 - command_target |= FMC_SDCMR_CTB2; -#endif - - if (sdramp->state == SDRAM_READY) { - SDRAMD.sdram->SDCMR = FMCCM_POWER_DOWN | command_target; - sdramp->state = SDRAM_STOP; - } -} - -#endif /* STM32_USE_FSMC_SDRAM */ - -#endif /* STM32F427xx / STM32F429xx / STM32F437xx / STM32F439xx */ - -/** @} */ - diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h deleted file mode 100644 index cef6772..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - SDRAM routines added by Nick Klimov aka progfin. - */ - -/** - * @file fsmc_sdram.h - * @brief SDRAM Driver subsystem low level driver header. - * - * @addtogroup SDRAM - * @{ - */ - -#ifndef _FMC_SDRAM_H_ -#define _FMC_SDRAM_H_ - -#if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) - -#include "hal_fsmc.h" - -#if (STM32_USE_FSMC_SDRAM == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ -/** - * @name Configuration options - * @{ - */ - -/** - * @brief SDRAM driver enable switch. - * @details If set to @p TRUE the support for SDRAM1 is included. - */ -#if !defined(STM32_SDRAM_USE_FSMC_SDRAM1) || defined(__DOXYGEN__) -#define STM32_SDRAM_USE_FSMC_SDRAM1 FALSE -#else -#define STM32_SDRAM1_MAP_BASE FSMC_Bank5_MAP_BASE -#endif - -/** - * @brief SDRAM driver enable switch. - * @details If set to @p TRUE the support for SDRAM2 is included. - */ -#if !defined(STM32_SDRAM_USE_FSMC_SDRAM2) || defined(__DOXYGEN__) -#define STM32_SDRAM_USE_FSMC_SDRAM2 FALSE -#else -#define STM32_SDRAM2_MAP_BASE FSMC_Bank6_MAP_BASE -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !STM32_SDRAM_USE_FSMC_SDRAM1 && !STM32_SDRAM_USE_FSMC_SDRAM2 -#error "SDRAM driver activated but no SDRAM peripheral assigned" -#endif - -#if (STM32_SDRAM_USE_FSMC_SDRAM1 || STM32_SDRAM_USE_FSMC_SDRAM2) && !STM32_HAS_FSMC -#error "FMC not present in the selected device" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ -/** - * @brief Driver state machine possible states. - */ -typedef enum { - SDRAM_UNINIT = 0, /**< Not initialized. */ - SDRAM_STOP = 1, /**< Stopped. */ - SDRAM_READY = 2, /**< Ready. */ -} sdramstate_t; - -/** - * @brief Type of a structure representing an SDRAM driver. - */ -typedef struct SDRAMDriver SDRAMDriver; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief SDRAM control register. - * @note Its value will be used for both banks. - */ - uint32_t sdcr; - - /** - * @brief SDRAM timing register. - * @note Its value will be used for both banks. - */ - uint32_t sdtr; - - /** - * @brief SDRAM command mode register. - * @note Only its MRD and NRFS bits will be used. - */ - uint32_t sdcmr; - - /** - * @brief SDRAM refresh timer register. - * @note Only its COUNT bits will be used. - */ - uint32_t sdrtr; -} SDRAMConfig; - -/** - * @brief Structure representing an SDRAM driver. - */ -struct SDRAMDriver { - /** - * @brief Driver state. - */ - sdramstate_t state; - /** - * @brief Pointer to the FMC SDRAM registers block. - */ - FSMC_SDRAM_TypeDef *sdram; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern SDRAMDriver SDRAMD; - -#ifdef __cplusplus -extern "C" { -#endif - void fsmcSdramInit(void); - void fsmcSdramStart(SDRAMDriver *sdramp, const SDRAMConfig *cfgp); - void fsmcSdramStop(SDRAMDriver *sdramp); -#ifdef __cplusplus -} -#endif - -#endif /* STM32_USE_FSMC_SDRAM */ - -#endif /* STM32F427xx / STM32F429xx / STM32F437xx / STM32F439xx */ - -#endif /* _FMC_SDRAM_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c deleted file mode 100644 index 6f710d4..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file fsmc_sram.c - * @brief SRAM Driver subsystem low level driver source. - * - * @addtogroup SRAM - * @{ - */ -#include "hal.h" -#include "hal_fsmc_sram.h" - -#if (STM32_USE_FSMC_SRAM == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ -/** - * @brief SRAM1 driver identifier. - */ -#if STM32_SRAM_USE_FSMC_SRAM1 || defined(__DOXYGEN__) -SRAMDriver SRAMD1; -#endif - -/** - * @brief SRAM2 driver identifier. - */ -#if STM32_SRAM_USE_FSMC_SRAM2 || defined(__DOXYGEN__) -SRAMDriver SRAMD2; -#endif - -/** - * @brief SRAM3 driver identifier. - */ -#if STM32_SRAM_USE_FSMC_SRAM3 || defined(__DOXYGEN__) -SRAMDriver SRAMD3; -#endif - -/** - * @brief SRAM4 driver identifier. - */ -#if STM32_SRAM_USE_FSMC_SRAM4 || defined(__DOXYGEN__) -SRAMDriver SRAMD4; -#endif - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level SRAM driver initialization. - * - * @notapi - */ -void fsmcSramInit(void) { - - fsmc_init(); - -#if STM32_SRAM_USE_FSMC_SRAM1 - SRAMD1.sram = FSMCD1.sram1; - SRAMD1.state = SRAM_STOP; -#endif /* STM32_SRAM_USE_FSMC_SRAM1 */ - -#if STM32_SRAM_USE_FSMC_SRAM2 - SRAMD2.sram = FSMCD1.sram2; - SRAMD2.state = SRAM_STOP; -#endif /* STM32_SRAM_USE_FSMC_SRAM2 */ - -#if STM32_SRAM_USE_FSMC_SRAM3 - SRAMD3.sram = FSMCD1.sram3; - SRAMD3.state = SRAM_STOP; -#endif /* STM32_SRAM_USE_FSMC_SRAM3 */ - -#if STM32_SRAM_USE_FSMC_SRAM4 - SRAMD4.sram = FSMCD1.sram4; - SRAMD4.state = SRAM_STOP; -#endif /* STM32_SRAM_USE_FSMC_SRAM4 */ -} - -/** - * @brief Configures and activates the SRAM peripheral. - * - * @param[in] sramp pointer to the @p SRAMDriver object - * @param[in] cfgp pointer to the @p SRAMConfig object - * - * @notapi - */ -void fsmcSramStart(SRAMDriver *sramp, const SRAMConfig *cfgp) { - - if (FSMCD1.state == FSMC_STOP) - fsmc_start(&FSMCD1); - - osalDbgAssert((sramp->state == SRAM_STOP) || (sramp->state == SRAM_READY), - "invalid state"); - - if (sramp->state == SRAM_STOP) { - sramp->sram->BCR = cfgp->bcr | FSMC_BCR_MBKEN; - sramp->sram->BTR = cfgp->btr; - sramp->sram->BWTR = cfgp->bwtr; - sramp->state = SRAM_READY; - } -} - -/** - * @brief Deactivates the SRAM peripheral. - * - * @param[in] sramp pointer to the @p SRAMDriver object - * - * @notapi - */ -void fsmcSramStop(SRAMDriver *sramp) { - - if (sramp->state == SRAM_READY) { - sramp->sram->BCR &= ~FSMC_BCR_MBKEN; - sramp->state = SRAM_STOP; - } -} - -#endif /* STM32_USE_FSMC_SRAM */ - -/** @} */ - diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h deleted file mode 100644 index 529bdc7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file fsmc_sram.h - * @brief SRAM Driver subsystem low level driver header. - * - * @addtogroup SRAM - * @{ - */ - -#ifndef _FSMC_SRAM_H_ -#define _FSMC_SRAM_H_ - -#include "hal_fsmc.h" - -#if (STM32_USE_FSMC_SRAM == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ -/** - * @name Configuration options - * @{ - */ - -/** - * @brief SRAM driver enable switch. - * @details If set to @p TRUE the support for SRAM1 is included. - */ -#if !defined(STM32_SRAM_USE_FSMC_SRAM1) || defined(__DOXYGEN__) -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#endif - -/** - * @brief SRAM driver enable switch. - * @details If set to @p TRUE the support for SRAM2 is included. - */ -#if !defined(STM32_SRAM_USE_FSMC_SRAM2) || defined(__DOXYGEN__) -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#endif - -/** - * @brief SRAM driver enable switch. - * @details If set to @p TRUE the support for SRAM3 is included. - */ -#if !defined(STM32_SRAM_USE_FSMC_SRAM3) || defined(__DOXYGEN__) -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#endif - -/** - * @brief SRAM driver enable switch. - * @details If set to @p TRUE the support for SRAM4 is included. - */ -#if !defined(STM32_SRAM_USE_FSMC_SRAM4) || defined(__DOXYGEN__) -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !STM32_SRAM_USE_FSMC_SRAM1 && !STM32_SRAM_USE_FSMC_SRAM2 && \ - !STM32_SRAM_USE_FSMC_SRAM3 && !STM32_SRAM_USE_FSMC_SRAM4 -#error "SRAM driver activated but no SRAM peripheral assigned" -#endif - -#if (STM32_SRAM_USE_FSMC_SRAM1 || STM32_SRAM_USE_FSMC_SRAM2 || \ - STM32_SRAM_USE_FSMC_SRAM3 || STM32_SRAM_USE_FSMC_SRAM4) && !STM32_HAS_FSMC -#error "FSMC not present in the selected device" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ -/** - * @brief Driver state machine possible states. - */ -typedef enum { - SRAM_UNINIT = 0, /**< Not initialized. */ - SRAM_STOP = 1, /**< Stopped. */ - SRAM_READY = 2, /**< Ready. */ -} sramstate_t; - -/** - * @brief Type of a structure representing an NAND driver. - */ -typedef struct SRAMDriver SRAMDriver; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - * @note Some bits in BCR register will be forced by driver. - */ -typedef struct { - uint32_t bcr; - uint32_t btr; - uint32_t bwtr; -} SRAMConfig; - -/** - * @brief Structure representing an NAND driver. - */ -struct SRAMDriver { - /** - * @brief Driver state. - */ - sramstate_t state; - /** - * @brief Pointer to the FSMC SRAM registers block. - */ - FSMC_SRAM_NOR_TypeDef *sram; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_SRAM_USE_FSMC_SRAM1 && !defined(__DOXYGEN__) -extern SRAMDriver SRAMD1; -#endif - -#if STM32_SRAM_USE_FSMC_SRAM2 && !defined(__DOXYGEN__) -extern SRAMDriver SRAMD2; -#endif - -#if STM32_SRAM_USE_FSMC_SRAM3 && !defined(__DOXYGEN__) -extern SRAMDriver SRAMD3; -#endif - -#if STM32_SRAM_USE_FSMC_SRAM4 && !defined(__DOXYGEN__) -extern SRAMDriver SRAMD4; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void fsmcSramInit(void); - void fsmcSramStart(SRAMDriver *sramp, const SRAMConfig *cfgp); - void fsmcSramStop(SRAMDriver *sramp); -#ifdef __cplusplus -} -#endif - -#endif /* STM32_USE_FSMC_SRAM */ - -#endif /* _FSMC_SRAM_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c deleted file mode 100644 index b37c026..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c +++ /dev/null @@ -1,515 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nand_lld.c - * @brief NAND Driver subsystem low level driver source. - * - * @addtogroup NAND - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_NAND == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ -#define NAND_DMA_CHANNEL \ - STM32_DMA_GETCHANNEL(STM32_NAND_DMA_STREAM, \ - STM32_FSMC_DMA_CHN) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief NAND1 driver identifier. - */ -#if STM32_NAND_USE_FSMC_NAND1 || defined(__DOXYGEN__) -NANDDriver NANDD1; -#endif - -/** - * @brief NAND2 driver identifier. - */ -#if STM32_NAND_USE_FSMC_NAND2 || defined(__DOXYGEN__) -NANDDriver NANDD2; -#endif - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ -/** - * @brief Wakes up the waiting thread. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] msg wakeup message - * - * @notapi - */ -static void wakeup_isr(NANDDriver *nandp) { - - osalDbgCheck(nandp->thread != NULL); - osalThreadResumeI(&nandp->thread, MSG_OK); -} - -/** - * @brief Put calling thread in suspend and switch driver state - * - * @param[in] nandp pointer to the @p NANDDriver object - */ -static void nand_lld_suspend_thread(NANDDriver *nandp) { - - osalThreadSuspendS(&nandp->thread); -} - -/** - * @brief Caclulate ECCPS register value - * - * @param[in] nandp pointer to the @p NANDDriver object - */ -static uint32_t calc_eccps(NANDDriver *nandp) { - - uint32_t i = 0; - uint32_t eccps = nandp->config->page_data_size; - - eccps = eccps >> 9; - while (eccps > 0){ - i++; - eccps >>= 1; - } - - return i << 17; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/** - * @brief Enable interrupts from NAND - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @notapi - */ -static void nand_ready_isr_enable(NANDDriver *nandp) { -#if STM32_NAND_USE_EXT_INT - nandp->config->ext_nand_isr_enable(); -#else - nandp->nand->SR &= ~(FSMC_SR_IRS | FSMC_SR_ILS | FSMC_SR_IFS | - FSMC_SR_ILEN | FSMC_SR_IFEN); - nandp->nand->SR |= FSMC_SR_IREN; -#endif -} - -/** - * @brief Disable interrupts from NAND - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @notapi - */ -static void nand_ready_isr_disable(NANDDriver *nandp) { -#if STM32_NAND_USE_EXT_INT - nandp->config->ext_nand_isr_disable(); -#else - nandp->nand->SR &= ~FSMC_SR_IREN; -#endif -} - -/** - * @brief Ready interrupt handler - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @notapi - */ -static void nand_isr_handler (NANDDriver *nandp) { - - osalSysLockFromISR(); - -#if !STM32_NAND_USE_EXT_INT - osalDbgCheck(nandp->nand->SR & FSMC_SR_IRS); /* spurious interrupt happened */ - nandp->nand->SR &= ~FSMC_SR_IRS; -#endif - - switch (nandp->state){ - case NAND_READ: - nandp->state = NAND_DMA_RX; - dmaStartMemCopy(nandp->dma, nandp->dmamode, - nandp->map_data, nandp->rxdata, nandp->datalen); - /* thread will be waked up from DMA ISR */ - break; - - case NAND_ERASE: - /* NAND reports about erase finish */ - nandp->state = NAND_READY; - wakeup_isr(nandp); - break; - - case NAND_PROGRAM: - /* NAND reports about page programming finish */ - nandp->state = NAND_READY; - wakeup_isr(nandp); - break; - - default: - osalSysHalt("Unhandled case"); - break; - } - osalSysUnlockFromISR(); -} - -/** - * @brief DMA RX end IRQ handler. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] flags pre-shifted content of the ISR register - * - * @notapi - */ -static void nand_lld_serve_transfer_end_irq(NANDDriver *nandp, uint32_t flags) { - /* DMA errors handling.*/ -#if defined(STM32_NAND_DMA_ERROR_HOOK) - if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) { - STM32_NAND_DMA_ERROR_HOOK(nandp); - } -#else - (void)flags; -#endif - - osalSysLockFromISR(); - - dmaStreamDisable(nandp->dma); - - switch (nandp->state){ - case NAND_DMA_TX: - nandp->state = NAND_PROGRAM; - nandp->map_cmd[0] = NAND_CMD_PAGEPROG; - /* thread will be woken from ready_isr() */ - break; - - case NAND_DMA_RX: - nandp->state = NAND_READY; - nandp->rxdata = NULL; - nandp->datalen = 0; - wakeup_isr(nandp); - break; - - default: - osalSysHalt("Unhandled case"); - break; - } - - osalSysUnlockFromISR(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level NAND driver initialization. - * - * @notapi - */ -void nand_lld_init(void) { - - fsmc_init(); - -#if STM32_NAND_USE_FSMC_NAND1 - /* Driver initialization.*/ - nandObjectInit(&NANDD1); - NANDD1.rxdata = NULL; - NANDD1.datalen = 0; - NANDD1.thread = NULL; - NANDD1.dma = STM32_DMA_STREAM(STM32_NAND_DMA_STREAM); - NANDD1.nand = FSMCD1.nand1; - NANDD1.map_data = (uint8_t*)FSMC_Bank2_MAP_COMMON_DATA; - NANDD1.map_cmd = (uint8_t*)FSMC_Bank2_MAP_COMMON_CMD; - NANDD1.map_addr = (uint8_t*)FSMC_Bank2_MAP_COMMON_ADDR; - NANDD1.bb_map = NULL; -#endif /* STM32_NAND_USE_FSMC_NAND1 */ - -#if STM32_NAND_USE_FSMC_NAND2 - /* Driver initialization.*/ - nandObjectInit(&NANDD2); - NANDD2.rxdata = NULL; - NANDD2.datalen = 0; - NANDD2.thread = NULL; - NANDD2.dma = STM32_DMA_STREAM(STM32_NAND_DMA_STREAM); - NANDD2.nand = FSMCD1.nand2; - NANDD2.map_data = (uint8_t*)FSMC_Bank3_MAP_COMMON_DATA; - NANDD2.map_cmd = (uint8_t*)FSMC_Bank3_MAP_COMMON_CMD; - NANDD2.map_addr = (uint8_t*)FSMC_Bank3_MAP_COMMON_ADDR; - NANDD2.bb_map = NULL; -#endif /* STM32_NAND_USE_FSMC_NAND2 */ -} - -/** - * @brief Configures and activates the NAND peripheral. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @notapi - */ -void nand_lld_start(NANDDriver *nandp) { - - bool b; - - if (FSMCD1.state == FSMC_STOP) - fsmc_start(&FSMCD1); - - if (nandp->state == NAND_STOP) { - b = dmaStreamAllocate(nandp->dma, - STM32_EMC_FSMC1_IRQ_PRIORITY, - (stm32_dmaisr_t)nand_lld_serve_transfer_end_irq, - (void *)nandp); - osalDbgAssert(!b, "stream already allocated"); - nandp->dmamode = STM32_DMA_CR_CHSEL(NAND_DMA_CHANNEL) | - STM32_DMA_CR_PL(STM32_NAND_NAND1_DMA_PRIORITY) | - STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE | - STM32_DMA_CR_DMEIE | - STM32_DMA_CR_TEIE | - STM32_DMA_CR_TCIE; - /* dmaStreamSetFIFO(nandp->dma, - STM32_DMA_FCR_DMDIS | NAND_STM32_DMA_FCR_FTH_LVL); */ - nandp->nand->PCR = calc_eccps(nandp) | FSMC_PCR_PTYP | FSMC_PCR_PBKEN; - nandp->nand->PMEM = nandp->config->pmem; - nandp->nand->PATT = nandp->config->pmem; - nandp->isr_handler = nand_isr_handler; - nand_ready_isr_enable(nandp); - } -} - -/** - * @brief Deactivates the NAND peripheral. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @notapi - */ -void nand_lld_stop(NANDDriver *nandp) { - - if (nandp->state == NAND_READY) { - dmaStreamRelease(nandp->dma); - nandp->nand->PCR &= ~FSMC_PCR_PBKEN; - nand_ready_isr_disable(nandp); - nandp->isr_handler = NULL; - } -} - -/** - * @brief Read data from NAND. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[out] data pointer to data buffer - * @param[in] datalen size of data buffer - * @param[in] addr pointer to address buffer - * @param[in] addrlen length of address - * @param[out] ecc pointer to store computed ECC. Ignored when NULL. - * - * @notapi - */ -void nand_lld_read_data(NANDDriver *nandp, uint8_t *data, size_t datalen, - uint8_t *addr, size_t addrlen, uint32_t *ecc){ - - nandp->state = NAND_READ; - nandp->rxdata = data; - nandp->datalen = datalen; - - nand_lld_write_cmd (nandp, NAND_CMD_READ0); - nand_lld_write_addr(nandp, addr, addrlen); - osalSysLock(); - nand_lld_write_cmd (nandp, NAND_CMD_READ0_CONFIRM); - - /* Here NAND asserts busy signal and starts transferring from memory - array to page buffer. After the end of transmission ready_isr functions - starts DMA transfer from page buffer to MCU's RAM.*/ - osalDbgAssert((nandp->nand->PCR & FSMC_PCR_ECCEN) == 0, - "State machine broken. ECCEN must be previously disabled."); - - if (NULL != ecc){ - nandp->nand->PCR |= FSMC_PCR_ECCEN; - } - - nand_lld_suspend_thread(nandp); - osalSysUnlock(); - - /* thread was woken up from DMA ISR */ - if (NULL != ecc){ - while (! (nandp->nand->SR & FSMC_SR_FEMPT)) - ; - *ecc = nandp->nand->ECCR; - nandp->nand->PCR &= ~FSMC_PCR_ECCEN; - } -} - -/** - * @brief Write data to NAND. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] data buffer with data to be written - * @param[in] datalen size of data buffer - * @param[in] addr pointer to address buffer - * @param[in] addrlen length of address - * @param[out] ecc pointer to store computed ECC. Ignored when NULL. - * - * @return The operation status reported by NAND IC (0x70 command). - * - * @notapi - */ -uint8_t nand_lld_write_data(NANDDriver *nandp, const uint8_t *data, - size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc) { - - nandp->state = NAND_WRITE; - - nand_lld_write_cmd (nandp, NAND_CMD_WRITE); - osalSysLock(); - nand_lld_write_addr(nandp, addr, addrlen); - - /* Now start DMA transfer to NAND buffer and put thread in sleep state. - Tread will be woken up from ready ISR. */ - nandp->state = NAND_DMA_TX; - osalDbgAssert((nandp->nand->PCR & FSMC_PCR_ECCEN) == 0, - "State machine broken. ECCEN must be previously disabled."); - - if (NULL != ecc){ - nandp->nand->PCR |= FSMC_PCR_ECCEN; - } - - dmaStartMemCopy(nandp->dma, nandp->dmamode, data, nandp->map_data, datalen); - - nand_lld_suspend_thread(nandp); - osalSysUnlock(); - - if (NULL != ecc){ - while (! (nandp->nand->SR & FSMC_SR_FEMPT)) - ; - *ecc = nandp->nand->ECCR; - nandp->nand->PCR &= ~FSMC_PCR_ECCEN; - } - - return nand_lld_read_status(nandp); -} - -/** - * @brief Erase block. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] addr pointer to address buffer - * @param[in] addrlen length of address - * - * @return The operation status reported by NAND IC (0x70 command). - * - * @notapi - */ -uint8_t nand_lld_erase(NANDDriver *nandp, uint8_t *addr, size_t addrlen) { - - nandp->state = NAND_ERASE; - - nand_lld_write_cmd (nandp, NAND_CMD_ERASE); - nand_lld_write_addr(nandp, addr, addrlen); - osalSysLock(); - nand_lld_write_cmd (nandp, NAND_CMD_ERASE_CONFIRM); - nand_lld_suspend_thread(nandp); - osalSysUnlock(); - - return nand_lld_read_status(nandp); -} - -/** - * @brief Read data from NAND using polling approach. - * - * @detatils Use this function to read data when no waiting expected. For - * Example read status word after 0x70 command - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[out] data pointer to output buffer - * @param[in] len length of data to be read - * - * @notapi - */ -void nand_lld_polled_read_data(NANDDriver *nandp, uint8_t *data, size_t len) { - size_t i = 0; - - for (i=0; imap_data[i]; -} - -/** - * @brief Send addres to NAND. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] len length of address array - * @param[in] addr pointer to address array - * - * @notapi - */ -void nand_lld_write_addr(NANDDriver *nandp, const uint8_t *addr, size_t len) { - size_t i = 0; - - for (i=0; imap_addr[i] = addr[i]; -} - -/** - * @brief Send command to NAND. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] cmd command value - * - * @notapi - */ -void nand_lld_write_cmd(NANDDriver *nandp, uint8_t cmd) { - nandp->map_cmd[0] = cmd; -} - -/** - * @brief Read status byte from NAND. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @return Status byte. - * - * @notapi - */ -uint8_t nand_lld_read_status(NANDDriver *nandp) { - - uint8_t status[1] = {0x01}; /* presume worse */ - - nand_lld_write_cmd(nandp, NAND_CMD_STATUS); - nand_lld_polled_read_data(nandp, status, 1); - - return status[0]; -} - -#endif /* HAL_USE_NAND */ - -/** @} */ - diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h deleted file mode 100644 index 8dca42f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nand_lld.h - * @brief NAND Driver subsystem low level driver header. - * - * @addtogroup NAND - * @{ - */ - -#ifndef _NAND_LLD_H_ -#define _NAND_LLD_H_ - -#include "hal_fsmc.h" -#include "bitmap.h" - -#if (HAL_USE_NAND == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ -#define NAND_MIN_PAGE_SIZE 256 -#define NAND_MAX_PAGE_SIZE 8192 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief FSMC1 interrupt priority level setting. - */ -#if !defined(STM32_EMC_FSMC1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EMC_FSMC1_IRQ_PRIORITY 10 -#endif - -/** - * @brief NAND driver enable switch. - * @details If set to @p TRUE the support for NAND1 is included. - */ -#if !defined(STM32_NAND_USE_NAND1) || defined(__DOXYGEN__) -#define STM32_NAND_USE_NAND1 FALSE -#endif - -/** - * @brief NAND driver enable switch. - * @details If set to @p TRUE the support for NAND2 is included. - */ -#if !defined(STM32_NAND_USE_NAND2) || defined(__DOXYGEN__) -#define STM32_NAND_USE_NAND2 FALSE -#endif - -/** - * @brief NAND DMA error hook. - * @note The default action for DMA errors is a system halt because DMA - * error can only happen because programming errors. - */ -#if !defined(STM32_NAND_DMA_ERROR_HOOK) || defined(__DOXYGEN__) -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") -#endif - -/** - * @brief NAND interrupt enable switch. - * @details If set to @p TRUE the support for internal FSMC interrupt included. - */ -#if !defined(STM32_NAND_USE_INT) || defined(__DOXYGEN__) -#define STM32_NAND_USE_INT FALSE -#endif - -/** -* @brief NAND1 DMA priority (0..3|lowest..highest). -*/ -#if !defined(STM32_NAND_NAND1_DMA_PRIORITY) || defined(__DOXYGEN__) -#define STM32_NAND_NAND1_DMA_PRIORITY 0 -#endif - -/** -* @brief NAND2 DMA priority (0..3|lowest..highest). -*/ -#if !defined(STM32_NAND_NAND2_DMA_PRIORITY) || defined(__DOXYGEN__) -#define STM32_NAND_NAND2_DMA_PRIORITY 0 -#endif - -/** - * @brief DMA stream used for NAND operations. - * @note This option is only available on platforms with enhanced DMA. - */ -#if !defined(STM32_NAND_DMA_STREAM) || defined(__DOXYGEN__) -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !STM32_NAND_USE_FSMC_NAND1 && !STM32_NAND_USE_FSMC_NAND2 -#error "NAND driver activated but no NAND peripheral assigned" -#endif - -#if (STM32_NAND_USE_FSMC_NAND2 || STM32_NAND_USE_FSMC_NAND1) && !STM32_HAS_FSMC -#error "FSMC not present in the selected device" -#endif - -#if STM32_NAND_USE_EXT_INT && !HAL_USE_EXT -#error "External interrupt controller must be enabled to use this feature" -#endif - -#if !defined(STM32_DMA_REQUIRED) -#define STM32_DMA_REQUIRED -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief NAND driver condition flags type. - */ -typedef uint32_t nandflags_t; - -/** - * @brief Type of a structure representing an NAND driver. - */ -typedef struct NANDDriver NANDDriver; - -/** - * @brief Type of interrupt handler function - */ -typedef void (*nandisrhandler_t)(NANDDriver *nandp); - -#if STM32_NAND_USE_EXT_INT -/** - * @brief Type of function switching external interrupts on and off. - */ -typedef void (*nandisrswitch_t)(void); -#endif /* STM32_NAND_USE_EXT_INT */ - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Pointer to lower level driver. - */ - //const FSMCDriver *fsmcp; - /** - * @brief Number of erase blocks in NAND device. - */ - uint32_t blocks; - /** - * @brief Number of data bytes in page. - */ - uint32_t page_data_size; - /** - * @brief Number of spare bytes in page. - */ - uint32_t page_spare_size; - /** - * @brief Number of pages in block. - */ - uint32_t pages_per_block; - /** - * @brief Number of write cycles for row addressing. - */ - uint8_t rowcycles; - /** - * @brief Number of write cycles for column addressing. - */ - uint8_t colcycles; - - /* End of the mandatory fields.*/ - /** - * @brief Number of wait cycles. This value will be used both for - * PMEM and PATTR registers - * - * @note For proper calculation procedure please look at AN2784 document - * from STMicroelectronics. - */ - uint32_t pmem; -#if STM32_NAND_USE_EXT_INT - /** - * @brief Function enabling interrupts from EXTI - */ - nandisrswitch_t ext_nand_isr_enable; - /** - * @brief Function disabling interrupts from EXTI - */ - nandisrswitch_t ext_nand_isr_disable; -#endif /* STM32_NAND_USE_EXT_INT */ -} NANDConfig; - -/** - * @brief Structure representing an NAND driver. - */ -struct NANDDriver { - /** - * @brief Driver state. - */ - nandstate_t state; - /** - * @brief Current configuration data. - */ - const NANDConfig *config; - /** - * @brief Array to store bad block map. - */ -#if NAND_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) -#if CH_CFG_USE_MUTEXES || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#elif CH_CFG_USE_SEMAPHORES - semaphore_t semaphore; -#endif -#endif /* NAND_USE_MUTUAL_EXCLUSION */ - /* End of the mandatory fields.*/ - /** - * @brief Function enabling interrupts from FSMC - */ - nandisrhandler_t isr_handler; - /** - * @brief Pointer to current transaction buffer - */ - uint8_t *rxdata; - /** - * @brief Current transaction length - */ - size_t datalen; - /** - * @brief DMA mode bit mask. - */ - uint32_t dmamode; - /** - * @brief DMA channel. - */ - const stm32_dma_stream_t *dma; - /** - * @brief Thread waiting for I/O completion. - */ - thread_t *thread; - /** - * @brief Pointer to the FSMC NAND registers block. - */ - FSMC_NAND_TypeDef *nand; - /** - * @brief Memory mapping for data. - */ - uint8_t *map_data; - /** - * @brief Memory mapping for commands. - */ - uint8_t *map_cmd; - /** - * @brief Memory mapping for addresses. - */ - uint8_t *map_addr; - /** - * @brief Pointer to bad block map. - * @details One bit per block. All memory allocation is user's responsibility. - */ - bitmap_t *bb_map; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_NAND_USE_FSMC_NAND1 && !defined(__DOXYGEN__) -extern NANDDriver NANDD1; -#endif - -#if STM32_NAND_USE_FSMC_NAND2 && !defined(__DOXYGEN__) -extern NANDDriver NANDD2; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void nand_lld_init(void); - void nand_lld_start(NANDDriver *nandp); - void nand_lld_stop(NANDDriver *nandp); - void nand_lld_read_data(NANDDriver *nandp, uint8_t *data, - size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc); - void nand_lld_polled_read_data(NANDDriver *nandp, uint8_t *data, size_t len); - void nand_lld_write_addr(NANDDriver *nandp, const uint8_t *addr, size_t len); - void nand_lld_write_cmd(NANDDriver *nandp, uint8_t cmd); - uint8_t nand_lld_erase(NANDDriver *nandp, uint8_t *addr, size_t addrlen); - uint8_t nand_lld_write_data(NANDDriver *nandp, const uint8_t *data, - size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc); - uint8_t nand_lld_read_status(NANDDriver *nandp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_NAND */ - -#endif /* _NAND_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c deleted file mode 100644 index e5f9a09..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c +++ /dev/null @@ -1,3792 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file stm32_ltdc.c - * @brief LCD-TFT Controller Driver. - */ - -#include "ch.h" -#include "hal.h" - -#include "hal_stm32_ltdc.h" - -#if (TRUE == STM32_LTDC_USE_LTDC) || defined(__DOXYGEN__) - -/* TODO: Check preconditions (e.g., LTDC is ready).*/ - -/* Ignore annoying warning messages for actually safe code.*/ -#if defined(__GNUC__) && !defined(__DOXYGEN__) -#pragma GCC diagnostic ignored "-Wtype-limits" -#endif - -/** - * @addtogroup ltdc - * @{ - */ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if !defined(LTDC_LxBFCR_BF) && !defined(__DOXYGEN__) -#define LTDC_LxBFCR_BF (LTDC_LxBFCR_BF1 | LTDC_LxBFCR_BF2) -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief LTDC1 driver identifier. - */ -LTDCDriver LTDCD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Bits per pixel lookup table. - */ -static const uint8_t ltdc_bpp[LTDC_MAX_PIXFMT_ID + 1] = { - 32, /* LTDC_FMT_ARGB8888 */ - 24, /* LTDC_FMT_RGB888 */ - 16, /* LTDC_FMT_RGB565 */ - 16, /* LTDC_FMT_ARGB1555 */ - 16, /* LTDC_FMT_ARGB4444 */ - 8, /* LTDC_FMT_L8 */ - 8, /* LTDC_FMT_AL44 */ - 16 /* LTDC_FMT_AL88 */ -}; - -/** - * @brief Invalid frame. - */ -static const ltdc_frame_t ltdc_invalid_frame = { - NULL, - 1, - 1, - 1, - LTDC_FMT_L8 -}; - -/** - * @brief Invalid window. - * @details Pixel size, located at the origin of the screen. - */ -static const ltdc_window_t ltdc_invalid_window = { - 0, - 1, - 0, - 1 -}; - -/** - * @brief Default layer specifications. - */ -static const ltdc_laycfg_t ltdc_default_laycfg = { - <dc_invalid_frame, - <dc_invalid_window, - LTDC_COLOR_BLACK, - 0x00, - LTDC_COLOR_BLACK, - NULL, - 0, - LTDC_BLEND_FIX1_FIX2, - 0 -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Forces LTDC register reload. - * @details Blocking function. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @sclass - * @notapi - */ -static void ltdc_force_reload_s(LTDCDriver *ltdcp) { - - osalDbgCheckClassS(); - osalDbgCheck(ltdcp == <DCD1); - - LTDC->SRCR |= LTDC_SRCR_IMR; - while (LTDC->SRCR & (LTDC_SRCR_IMR | LTDC_SRCR_VBR)) - chSchDoYieldS(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @name LTDC interrupt handlers - * @{ - */ - -/** - * @brief LTDC event interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_LTDC_EV_HANDLER) { - - LTDCDriver *const ltdcp = <DCD1; - thread_t *tp = NULL; - - OSAL_IRQ_PROLOGUE(); - - /* Handle Line Interrupt ISR.*/ - if ((LTDC->ISR & LTDC_ISR_LIF) && (LTDC->IER & LTDC_IER_LIE)) { - osalDbgAssert(ltdcp->config->line_isr != NULL, "invalid state"); - ltdcp->config->line_isr(ltdcp); - LTDC->ICR |= LTDC_ICR_CLIF; - } - - /* Handle Register Reload ISR.*/ - if ((LTDC->ISR & LTDC_ISR_RRIF) && (LTDC->IER & LTDC_IER_RRIE)) { - if (ltdcp->config->rr_isr != NULL) - ltdcp->config->rr_isr(ltdcp); - - osalSysLockFromISR(); - osalDbgAssert(ltdcp->state == LTDC_ACTIVE, "invalid state"); -#if (TRUE == LTDC_USE_WAIT) - /* Wake the waiting thread up.*/ - if (ltdcp->thread != NULL) { - tp = ltdcp->thread; - ltdcp->thread = NULL; - tp->u.rdymsg = MSG_OK; - chSchReadyI(tp); - } -#endif /* LTDC_USE_WAIT */ - ltdcp->state = LTDC_READY; - osalSysUnlockFromISR(); - - LTDC->ICR |= LTDC_ICR_CRRIF; - } - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief LTDC error interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_LTDC_ER_HANDLER) { - - static LTDCDriver *const ltdcp = <DCD1; - - OSAL_IRQ_PROLOGUE(); - - /* Handle FIFO Underrun ISR.*/ - if ((LTDC->ISR & LTDC_ISR_FUIF) && (LTDC->IER & LTDC_IER_FUIE)) { - osalDbgAssert(ltdcp->config->fuerr_isr != NULL, "invalid state"); - ltdcp->config->fuerr_isr(ltdcp); - LTDC->ICR |= LTDC_ICR_CFUIF; - } - - /* Handle Transfer Error ISR.*/ - if ((LTDC->ISR & LTDC_ISR_TERRIF) && (LTDC->IER & LTDC_IER_TERRIE)) { - osalDbgAssert(ltdcp->config->terr_isr != NULL, "invalid state"); - ltdcp->config->terr_isr(ltdcp); - LTDC->ICR |= LTDC_ICR_CTERRIF; - } - - OSAL_IRQ_EPILOGUE(); -} - -/** @} */ - -/** - * @name LTDC driver-specific methods - * @{ - */ - -/** - * @brief LTDC Driver initialization. - * @details Initializes the LTDC subsystem and chosen drivers. Should be - * called at board initialization. - * - * @init - */ -void ltdcInit(void) { - - /* Reset the LTDC hardware module.*/ - rccResetLTDC(); - - /* Enable the LTDC clock.*/ - RCC->DCKCFGR = (RCC->DCKCFGR & ~RCC_DCKCFGR_PLLSAIDIVR) | (2 << 16); /* /8 */ - rccEnableLTDC(false); - - /* Driver struct initialization.*/ - ltdcObjectInit(<DCD1); - LTDCD1.state = LTDC_STOP; -} - -/** - * @brief Initializes the standard part of a @p LTDCDriver structure. - * - * @param[out] ltdcp pointer to the @p LTDCDriver object - * - * @init - */ -void ltdcObjectInit(LTDCDriver *ltdcp) { - - osalDbgCheck(ltdcp == <DCD1); - - ltdcp->state = LTDC_UNINIT; - ltdcp->config = NULL; - ltdcp->active_window = ltdc_invalid_window; -#if (TRUE == LTDC_USE_WAIT) - ltdcp->thread = NULL; -#endif /* LTDC_USE_WAIT */ -#if (TRUE == LTDC_USE_MUTUAL_EXCLUSION) -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxObjectInit(<dcp->lock); -#else - chSemObjectInit(<dcp->lock, 1); -#endif -#endif /* LTDC_USE_MUTUAL_EXCLUSION */ -} - -/** - * @brief Get the driver state. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @retun driver state - * - * @iclass - */ -ltdc_state_t ltdcGetStateI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - - return ltdcp->state; -} - -/** - * @brief Get the driver state. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @retun driver state - * - * @api - */ -ltdc_state_t ltdcGetState(LTDCDriver *ltdcp) { - - ltdc_state_t state; - osalSysLock(); - state = ltdcGetStateI(ltdcp); - osalSysUnlock(); - return state; -} - -/** - * @brief Configures and activates the LTDC peripheral. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] configp pointer to the @p LTDCConfig object - * - * @api - */ -void ltdcStart(LTDCDriver *ltdcp, const LTDCConfig *configp) { - - uint32_t hacc, vacc, flags; - - osalSysLock(); - - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(configp != NULL); - osalDbgAssert(ltdcp->state == LTDC_STOP, "invalid state"); - - ltdcp->config = configp; - - /* Turn off the controller and its interrupts.*/ - LTDC->GCR = 0; - LTDC->IER = 0; - ltdc_force_reload_s(ltdcp); - - /* Set synchronization params.*/ - osalDbgAssert(configp->hsync_width >= LTDC_MIN_HSYNC_WIDTH, "bounds"); - osalDbgAssert(configp->hsync_width <= LTDC_MAX_HSYNC_WIDTH, "bounds"); - osalDbgAssert(configp->vsync_height >= LTDC_MIN_VSYNC_HEIGHT, "bounds"); - osalDbgAssert(configp->vsync_height <= LTDC_MAX_VSYNC_HEIGHT, "bounds"); - - hacc = configp->hsync_width - 1; - vacc = configp->vsync_height - 1; - - LTDC->SSCR = (((hacc << 16) & LTDC_SSCR_HSW) | - ((vacc << 0) & LTDC_SSCR_VSH)); - - /* Set accumulated back porch params.*/ - osalDbgAssert(configp->hbp_width >= LTDC_MIN_HBP_WIDTH, "bounds"); - osalDbgAssert(configp->hbp_width <= LTDC_MAX_HBP_WIDTH, "bounds"); - osalDbgAssert(configp->vbp_height >= LTDC_MIN_VBP_HEIGHT, "bounds"); - osalDbgAssert(configp->vbp_height <= LTDC_MAX_VBP_HEIGHT, "bounds"); - - hacc += configp->hbp_width; - vacc += configp->vbp_height; - - osalDbgAssert(hacc + 1 >= LTDC_MIN_ACC_HBP_WIDTH, "bounds"); - osalDbgAssert(hacc + 1 <= LTDC_MAX_ACC_HBP_WIDTH, "bounds"); - osalDbgAssert(vacc + 1 >= LTDC_MIN_ACC_VBP_HEIGHT, "bounds"); - osalDbgAssert(vacc + 1 <= LTDC_MAX_ACC_VBP_HEIGHT, "bounds"); - - LTDC->BPCR = (((hacc << 16) & LTDC_BPCR_AHBP) | - ((vacc << 0) & LTDC_BPCR_AVBP)); - - ltdcp->active_window.hstart = hacc + 1; - ltdcp->active_window.vstart = vacc + 1; - - /* Set accumulated active params.*/ - osalDbgAssert(configp->screen_width >= LTDC_MIN_SCREEN_WIDTH, "bounds"); - osalDbgAssert(configp->screen_width <= LTDC_MAX_SCREEN_WIDTH, "bounds"); - osalDbgAssert(configp->screen_height >= LTDC_MIN_SCREEN_HEIGHT, "bounds"); - osalDbgAssert(configp->screen_height <= LTDC_MAX_SCREEN_HEIGHT, "bounds"); - - hacc += configp->screen_width; - vacc += configp->screen_height; - - osalDbgAssert(hacc + 1 >= LTDC_MIN_ACC_ACTIVE_WIDTH, "bounds"); - osalDbgAssert(hacc + 1 <= LTDC_MAX_ACC_ACTIVE_WIDTH, "bounds"); - osalDbgAssert(vacc + 1 >= LTDC_MIN_ACC_ACTIVE_HEIGHT, "bounds"); - osalDbgAssert(vacc + 1 <= LTDC_MAX_ACC_ACTIVE_HEIGHT, "bounds"); - - LTDC->AWCR = (((hacc << 16) & LTDC_AWCR_AAW) | - ((vacc << 0) & LTDC_AWCR_AAH)); - - ltdcp->active_window.hstop = hacc; - ltdcp->active_window.vstop = vacc; - - /* Set accumulated total params.*/ - osalDbgAssert(configp->hfp_width >= LTDC_MIN_HFP_WIDTH, "bounds"); - osalDbgAssert(configp->hfp_width <= LTDC_MAX_HFP_WIDTH, "bounds"); - osalDbgAssert(configp->vfp_height >= LTDC_MIN_VFP_HEIGHT, "bounds"); - osalDbgAssert(configp->vfp_height <= LTDC_MAX_VFP_HEIGHT, "bounds"); - - hacc += configp->hfp_width; - vacc += configp->vfp_height; - - osalDbgAssert(hacc + 1 >= LTDC_MIN_ACC_TOTAL_WIDTH, "bounds"); - osalDbgAssert(hacc + 1 <= LTDC_MAX_ACC_TOTAL_WIDTH, "bounds"); - osalDbgAssert(vacc + 1 >= LTDC_MIN_ACC_TOTAL_HEIGHT, "bounds"); - osalDbgAssert(vacc + 1 <= LTDC_MAX_ACC_TOTAL_HEIGHT, "bounds"); - - LTDC->TWCR = (((hacc << 16) & LTDC_TWCR_TOTALW) | - ((vacc << 0) & LTDC_TWCR_TOTALH)); - - /* Set signal polarities and other flags.*/ - ltdcSetEnableFlagsI(ltdcp, configp->flags & ~LTDC_EF_ENABLE); - - /* Color settings.*/ - ltdcSetClearColorI(ltdcp, configp->clear_color); - - /* Load layer configurations.*/ - ltdcBgSetConfigI(ltdcp, configp->bg_laycfg); - ltdcFgSetConfigI(ltdcp, configp->fg_laycfg); - - /* Enable only the assigned interrupt service routines.*/ - nvicEnableVector(STM32_LTDC_EV_NUMBER, STM32_LTDC_EV_IRQ_PRIORITY); - nvicEnableVector(STM32_LTDC_ER_NUMBER, STM32_LTDC_ER_IRQ_PRIORITY); - - flags = LTDC_IER_RRIE; - if (configp->line_isr != NULL) - flags |= LTDC_IER_LIE; - if (configp->fuerr_isr != NULL) - flags |= LTDC_IER_FUIE; - if (configp->terr_isr != NULL) - flags |= LTDC_IER_TERRIE; - LTDC->IER = flags; - - /* Apply settings.*/ - ltdc_force_reload_s(ltdcp); - - /* Turn on the controller.*/ - LTDC->GCR |= LTDC_GCR_LTDCEN; - ltdc_force_reload_s(ltdcp); - - ltdcp->state = LTDC_READY; - osalSysUnlock(); -} - -/** - * @brief Deactivates the LTDC peripheral. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcStop(LTDCDriver *ltdcp) { - - osalDbgCheck(ltdcp == <DCD1); - - osalSysLock(); - osalDbgAssert(ltdcp->state == LTDC_READY, "invalid state"); - - /* Turn off the controller and its interrupts.*/ - LTDC->GCR &= ~LTDC_GCR_LTDCEN; - LTDC->IER = 0; -#if (TRUE == LTDC_USE_WAIT) - ltdcReloadS(ltdcp, true); -#else - ltdcStartReloadI(ltdcp, true); - while (ltdcIsReloadingI(ltdcp)) - chSchDoYieldS(); -#endif /* LTDC_USE_WAIT */ - - ltdcp->state = LTDC_STOP; - osalSysUnlock(); -} - -#if (TRUE == LTDC_USE_MUTUAL_EXCLUSION) - -/** - * @brief Gains exclusive access to the LTDC module. - * @details This function tries to gain ownership to the LTDC module, if the - * module is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p LTDC_USE_MUTUAL_EXCLUSION must be enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @sclass - */ -void ltdcAcquireBusS(LTDCDriver *ltdcp) { - - osalDbgCheckClassS(); - osalDbgCheck(ltdcp == <DCD1); - -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxLockS(<dcp->lock); -#else - chSemWaitS(<dcp->lock); -#endif -} - -/** - * @brief Gains exclusive access to the LTDC module. - * @details This function tries to gain ownership to the LTDC module, if the - * module is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p LTDC_USE_MUTUAL_EXCLUSION must be enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcAcquireBus(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcAcquireBusS(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Releases exclusive access to the LTDC module. - * @pre In order to use this function the option - * @p LTDC_USE_MUTUAL_EXCLUSION must be enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @sclass - */ -void ltdcReleaseBusS(LTDCDriver *ltdcp) { - - osalDbgCheckClassS(); - osalDbgCheck(ltdcp == <DCD1); - -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxUnlockS(<dcp->lock); -#else - chSemSignalI(<dcp->lock); -#endif -} - -/** - * @brief Releases exclusive access to the LTDC module. - * @pre In order to use this function the option - * @p LTDC_USE_MUTUAL_EXCLUSION must be enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcReleaseBus(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcReleaseBusS(ltdcp); - osalSysUnlock(); -} - -#endif /* LTDC_USE_MUTUAL_EXCLUSION */ - -/** @} */ - -/** - * @name LTDC global methods - * @{ - */ - -/** - * @brief Get enabled flags. - * @details Returns all the flags of the LTDC_EF_* group at once. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled flags - * - * @iclass - */ -ltdc_flags_t ltdcGetEnableFlagsI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return LTDC->GCR & LTDC_EF_MASK; -} - -/** - * @brief Get enabled flags. - * @details Returns all the flags of the LTDC_EF_* group at once. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled flags - * - * @api - */ -ltdc_flags_t ltdcGetEnableFlags(LTDCDriver *ltdcp) { - - ltdc_flags_t flags; - osalSysLock(); - flags = ltdcGetEnableFlagsI(ltdcp); - osalSysUnlock(); - return flags; -} - -/** - * @brief Set enabled flags. - * @details Sets all the flags of the LTDC_EF_* group at once. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] flags enabled flags - * - * @iclass - */ -void ltdcSetEnableFlagsI(LTDCDriver *ltdcp, ltdc_flags_t flags) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->GCR = flags & LTDC_EF_MASK; -} - -/** - * @brief Set enabled flags. - * @details Sets all the flags of the LTDC_EF_* group at once. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] flags enabled flags - * - * @api - */ -void ltdcSetEnableFlags(LTDCDriver *ltdcp, ltdc_flags_t flags) { - - osalSysLock(); - ltdcSetEnableFlagsI(ltdcp, flags); - osalSysUnlock(); -} - -/** - * @brief Reloading shadow registers. - * @details Tells whether the LTDC is reloading shadow registers. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return reloading - * - * @iclass - */ -bool ltdcIsReloadingI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC->SRCR & (LTDC_SRCR_IMR | LTDC_SRCR_VBR)) != 0; -} - -/** - * @brief Reloading shadow registers. - * @details Tells whether the LTDC is reloading shadow registers. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return reloading - * - * @api - */ -bool ltdcIsReloading(LTDCDriver *ltdcp) { - - bool reloading; - osalSysLock(); - reloading = ltdcIsReloadingI(ltdcp); - osalSysUnlock(); - return reloading; -} - -/** - * @brief Reload shadow registers. - * @details Starts reloading LTDC shadow registers, upon vsync or immediately. - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] immediately reload immediately, not upon vsync - * - * @iclass - */ -void ltdcStartReloadI(LTDCDriver *ltdcp, bool immediately) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgAssert(ltdcp->state == LTDC_READY, "not ready"); - (void)ltdcp; - - ltdcp->state = LTDC_ACTIVE; - if (immediately) - LTDC->SRCR |= LTDC_SRCR_IMR; - else - LTDC->SRCR |= LTDC_SRCR_VBR; -} - -/** - * @brief Reload shadow registers. - * @details Starts reloading LTDC shadow registers, upon vsync or immediately. - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] immediately reload immediately, not upon vsync - * - * @api - */ -void ltdcStartReload(LTDCDriver *ltdcp, bool immediately) { - - osalSysLock(); - ltdcStartReloadI(ltdcp, immediately); - osalSysUnlock(); -} - -/** - * @brief Reload shadow registers. - * @details Reloads LTDC shadow registers, upon vsync or immediately. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] immediately reload immediately, not upon vsync - * - * @sclass - */ -void ltdcReloadS(LTDCDriver *ltdcp, bool immediately) { - - osalDbgCheckClassS(); - osalDbgCheck(ltdcp == <DCD1); - - ltdcStartReloadI(ltdcp, immediately); - -#if (TRUE == LTDC_USE_WAIT) - osalDbgAssert(ltdcp->thread == NULL, "already waiting"); - - if (immediately) { - while (LTDC->SRCR & LTDC_SRCR_IMR) - chSchDoYieldS(); - ltdcp->state = LTDC_READY; - } else { - ltdcp->thread = chThdGetSelfX(); - chSchGoSleepS(CH_STATE_SUSPENDED); - } -#else - while (LTDC->SRCR & LTDC_SRCR_IMR) - chSchDoYieldS(); - ltdcp->state = LTDC_READY; -#endif -} - -/** - * @brief Reload shadow registers. - * @details Reloads LTDC shadow registers, upon vsync or immediately. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] immediately reload immediately, not upon vsync - * - * @api - */ -void ltdcReload(LTDCDriver *ltdcp, bool immediately) { - - osalSysLock(); - ltdcReloadS(ltdcp, immediately); - osalSysUnlock(); -} - -/** - * @brief Dithering enabled. - * @details Tells whether the dithering is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcIsDitheringEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC->GCR & LTDC_GCR_DTEN) != 0; -} - -/** - * @brief Dithering enabled. - * @details Tells whether the dithering is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcIsDitheringEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcIsDitheringEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Enable dithering. - * @details Enables dithering capabilities for pixel formats with less than - * 8 bits per channel. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcEnableDitheringI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->GCR |= LTDC_GCR_DTEN; -} - -/** - * @brief Enable dithering. - * @details Enables dithering capabilities for pixel formats with less than - * 8 bits per channel. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcEnableDithering(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcEnableDitheringI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Disable dithering. - * @details Disables dithering capabilities for pixel formats with less than - * 8 bits per channel. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcDisableDitheringI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->GCR &= ~LTDC_GCR_DTEN; -} - -/** - * @brief Disable dithering. - * @details Disables dithering capabilities for pixel formats with less than - * 8 bits per channel. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcDisableDithering(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcDisableDitheringI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Get clear screen color. - * @details Gets the clear screen (actual background) color. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return clear screen color, RGB-888 - * - * @iclass - */ -ltdc_color_t ltdcGetClearColorI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_color_t)(LTDC->BCCR & 0x00FFFFFF); -} - -/** - * @brief Get clear screen color. - * @details Gets the clear screen (actual background) color. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return clear screen color, RGB-888 - * - * @api - */ -ltdc_color_t ltdcGetClearColor(LTDCDriver *ltdcp) { - - ltdc_color_t color; - osalSysLock(); - color = ltdcGetClearColorI(ltdcp); - osalSysUnlock(); - return color; -} - -/** - * @brief Set clear screen color. - * @details Sets the clear screen (actual background) color. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c clear screen color, RGB-888 - * - * @iclass - */ -void ltdcSetClearColorI(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->BCCR = (LTDC->BCCR & ~0x00FFFFFF) | (c & 0x00FFFFFF); -} - -/** - * @brief Set clear screen color. - * @details Sets the clear screen (actual background) color. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c clear screen color, RGB-888 - * - * @api - */ -void ltdcSetClearColor(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalSysLock(); - ltdcSetClearColorI(ltdcp, c); - osalSysUnlock(); -} - -/** - * @brief Get line interrupt position. - * @details Gets the line interrupt position. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return line interrupt position - * - * @iclass - */ -uint16_t ltdcGetLineInterruptPosI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (uint16_t)(LTDC->LIPCR & LTDC_LIPCR_LIPOS); -} - -/** - * @brief Get line interrupt position. - * @details Gets the line interrupt position. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return line interrupt position - * - * @api - */ -uint16_t ltdcGetLineInterruptPos(LTDCDriver *ltdcp) { - - uint16_t line; - osalSysLock(); - line = ltdcGetLineInterruptPosI(ltdcp); - osalSysUnlock(); - return line; -} - -/** - * @brief Set line interrupt position. - * @details Sets the line interrupt position. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcSetLineInterruptPosI(LTDCDriver *ltdcp, uint16_t line) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->LIPCR = ((LTDC->LIPCR & ~LTDC_LIPCR_LIPOS) | - ((uint32_t)line & LTDC_LIPCR_LIPOS)); -} - -/** - * @brief Set line interrupt position. - * @details Sets the line interrupt position. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcSetLineInterruptPos(LTDCDriver *ltdcp, uint16_t line) { - - osalSysLock(); - ltdcSetLineInterruptPosI(ltdcp, line); - osalSysUnlock(); -} - -/** - * @brief Line interrupt enabled. - * @details Tells whether the line interrupt is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcIsLineInterruptEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC->IER & LTDC_IER_LIE) != 0; -} - -/** - * @brief Line interrupt enabled. - * @details Tells whether the line interrupt is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcIsLineInterruptEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcIsLineInterruptEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Enable line interrupt. - * @details Enables line interrupt. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcEnableLineInterruptI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->IER |= LTDC_IER_LIE; -} - -/** - * @brief Enable line interrupt. - * @details Enables line interrupt. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcEnableLineInterrupt(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcEnableLineInterruptI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Disable line interrupt. - * @details Disables line interrupt. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcDisableLineInterruptI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC->IER &= ~LTDC_IER_LIE; -} - -/** - * @brief Disable line interrupt. - * @details Disables line interrupt. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcDisableLineInterrupt(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcDisableLineInterruptI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Get current position. - * @details Gets the current position. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] xp pointer to the destination horizontal coordinate - * @param[out] yp pointer to the destination vertical coordinate - * - * @iclass - */ -void ltdcGetCurrentPosI(LTDCDriver *ltdcp, uint16_t *xp, uint16_t *yp) { - - const uint32_t r = LTDC->CPSR; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - *xp = (uint16_t)((r & LTDC_CPSR_CXPOS) >> 16); - *yp = (uint16_t)((r & LTDC_CPSR_CYPOS) >> 0); -} - -/** - * @brief Get current position. - * @details Gets the current position. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] xp pointer to the destination horizontal coordinate - * @param[out] yp pointer to the destination vertical coordinate - * - * @api - */ -void ltdcGetCurrentPos(LTDCDriver *ltdcp, uint16_t *xp, uint16_t *yp) { - - osalSysLock(); - ltdcGetCurrentPosI(ltdcp, xp, yp); - osalSysUnlock(); -} - -/** @} */ - -/** - * @name LTDC background layer (layer 1) methods - * @{ - */ - -/** - * @brief Get background layer enabled flags. - * @details Returns all the flags of the LTDC_LEF_* group at once. - * Targeting the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled flags - * - * @iclass - */ -ltdc_flags_t ltdcBgGetEnableFlagsI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return LTDC_Layer1->CR & LTDC_LEF_MASK; -} - -/** - * @brief Get background layer enabled flags. - * @details Returns all the flags of the LTDC_LEF_* group at once. - * Targeting the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled flags - * - * @api - */ -ltdc_flags_t ltdcBgGetEnableFlags(LTDCDriver *ltdcp) { - - ltdc_flags_t flags; - osalSysLock(); - flags = ltdcBgGetEnableFlagsI(ltdcp); - osalSysUnlock(); - return flags; -} - -/** - * @brief Set background layer enabled flags. - * @details Sets all the flags of the LTDC_LEF_* group at once. - * Targeting the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] flags enabled flags - * - * @iclass - */ -void ltdcBgSetEnableFlagsI(LTDCDriver *ltdcp, ltdc_flags_t flags) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR = ((LTDC_Layer1->CR & ~LTDC_LEF_MASK) | - ((uint32_t)flags & LTDC_LEF_MASK)); -} - -/** - * @brief Set background layer enabled flags. - * @details Sets all the flags of the LTDC_LEF_* group at once. - * Targeting the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] flags enabled flags - * - * @api - */ -void ltdcBgSetEnableFlags(LTDCDriver *ltdcp, ltdc_flags_t flags) { - - osalSysLock(); - ltdcBgSetEnableFlagsI(ltdcp, flags); - osalSysUnlock(); -} - -/** - * @brief Background layer enabled. - * @details Tells whether the background layer (layer 1) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcBgIsEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC_Layer1->CR & ~LTDC_LxCR_LEN) != 0; -} - -/** - * @brief Background layer enabled. - * @details Tells whether the background layer (layer 1) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcBgIsEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcBgIsEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Background layer enable. - * @details Enables the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgEnableI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR |= LTDC_LxCR_LEN; -} - -/** - * @brief Background layer enable. - * @details Enables the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgEnable(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgEnableI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Background layer disable. - * @details Disables the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgDisableI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR &= ~LTDC_LxCR_LEN; -} - -/** - * @brief Background layer disable. - * @details Disables the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgDisable(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgDisableI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Background layer palette enabled. - * @details Tells whether the background layer (layer 1) palette (color lookup - * table) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcBgIsPaletteEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC_Layer1->CR & ~LTDC_LxCR_CLUTEN) != 0; -} - -/** - * @brief Background layer palette enabled. - * @details Tells whether the background layer (layer 1) palette (color lookup - * table) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcBgIsPaletteEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcBgIsPaletteEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Enable background layer palette. - * @details Enables the palette (color lookup table) of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgEnablePaletteI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR |= LTDC_LxCR_CLUTEN; -} - -/** - * @brief Enable background layer palette. - * @details Enables the palette (color lookup table) of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgEnablePalette(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgEnablePaletteI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Disable background layer palette. - * @details Disables the palette (color lookup table) of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgDisablePaletteI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR &= ~LTDC_LxCR_CLUTEN; -} - -/** - * @brief Disable background layer palette. - * @details Disables the palette (color lookup table) of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgDisablePalette(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgDisablePaletteI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Set background layer palette color. - * @details Sets the color of a palette (color lookup table) slot to the - * background layer (layer 1). - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] slot palette slot - * @param[in] c color, RGB-888 - * - * @iclass - */ -void ltdcBgSetPaletteColorI(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgAssert(!ltdcBgIsEnabledI(ltdcp), "invalid state"); - (void)ltdcp; - - LTDC_Layer1->CLUTWR = (((uint32_t)slot << 24) | (c & 0x00FFFFFF)); -} - -/** - * @brief Set background layer palette color. - * @details Sets the color of a palette (color lookup table) slot to the - * background layer (layer 1). - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] slot palette slot - * @param[in] c color, RGB-888 - * - * @api - */ -void ltdcBgSetPaletteColor(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c) { - - osalSysLock(); - ltdcBgSetPaletteColorI(ltdcp, slot, c); - osalSysUnlock(); -} - -/** - * @brief Set background layer palette. - * @details Sets the entire palette color (color lookup table) slot. - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] colors array of palette colors, RGB-888 - * @param[in] length number of palette colors - * - * @iclass - */ -void ltdcBgSetPaletteI(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length) { - - uint16_t i; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck((colors == NULL) == (length == 0)); - osalDbgAssert(length <= LTDC_MAX_PALETTE_LENGTH, "bounds"); - osalDbgAssert(!ltdcBgIsEnabledI(ltdcp), "invalid state"); - (void)ltdcp; - - for (i = 0; i < length; ++i) - LTDC_Layer1->CLUTWR = (((uint32_t)i << 24) | (colors[i] & 0x00FFFFFF)); -} - -/** - * @brief Set background layer palette. - * @details Sets the entire palette color (color lookup table) slot. - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] colors array of palette colors, RGB-888 - * @param[in] length number of palette colors - * - * @api - */ -void ltdcBgSetPalette(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length) { - - osalSysLock(); - ltdcBgSetPaletteI(ltdcp, colors, length); - osalSysUnlock(); -} - -/** - * @brief Get background layer pixel format. - * @details Gets the pixel format of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return pixel format - * - * @iclass - */ -ltdc_pixfmt_t ltdcBgGetPixelFormatI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_pixfmt_t)(LTDC_Layer1->PFCR & LTDC_LxPFCR_PF); -} - -/** - * @brief Get background layer pixel format. - * @details Gets the pixel format of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return pixel format - * - * @api - */ -ltdc_pixfmt_t ltdcBgGetPixelFormat(LTDCDriver *ltdcp) { - - ltdc_pixfmt_t fmt; - osalSysLock(); - fmt = ltdcBgGetPixelFormatI(ltdcp); - osalSysUnlock(); - return fmt; -} - -/** - * @brief Set background layer pixel format. - * @details Sets the pixel format of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] fmt pixel format - * - * @iclass - */ -void ltdcBgSetPixelFormatI(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgAssert(fmt >= LTDC_MIN_PIXFMT_ID, "bounds"); - osalDbgAssert(fmt <= LTDC_MAX_PIXFMT_ID, "bounds"); - (void)ltdcp; - - LTDC_Layer1->PFCR = ((LTDC_Layer1->PFCR & ~LTDC_LxPFCR_PF) | - ((uint32_t)fmt & LTDC_LxPFCR_PF)); -} - -/** - * @brief Set background layer pixel format. - * @details Sets the pixel format of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] fmt pixel format - * - * @api - */ -void ltdcBgSetPixelFormat(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt) { - - osalSysLock(); - ltdcBgSetPixelFormatI(ltdcp, fmt); - osalSysUnlock(); -} - -/** - * @brief Background layer color keying enabled. - * @details Tells whether the background layer (layer 1) has color keying - * enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcBgIsKeyingEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC_Layer1->CR & ~LTDC_LxCR_COLKEN) != 0; -} - -/** - * @brief Background layer color keying enabled. - * @details Tells whether the background layer (layer 1) has color keying - * enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcBgIsKeyingEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcBgIsKeyingEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Enable background layer color keying. - * @details Enables color keying capabilities of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgEnableKeyingI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR |= LTDC_LxCR_COLKEN; -} - -/** - * @brief Enable background layer color keying. - * @details Enables color keying capabilities of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgEnableKeying(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgEnableKeyingI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Disable background layer color keying. - * @details Disables color keying capabilities of the background layer (layer - * 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgDisableKeyingI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CR &= ~LTDC_LxCR_COLKEN; -} - -/** - * @brief Disable background layer color keying. - * @details Disables color keying capabilities of the background layer (layer - * 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgDisableKeying(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgDisableKeyingI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Get background layer color key. - * @details Gets the color key of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return color key, RGB-888 - * - * @iclass - */ -ltdc_color_t ltdcBgGetKeyingColorI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_color_t)(LTDC_Layer1->CKCR & 0x00FFFFFF); -} - -/** - * @brief Get background layer color key. - * @details Gets the color key of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return color key, RGB-888 - * - * @api - */ -ltdc_color_t ltdcBgGetKeyingColor(LTDCDriver *ltdcp) { - - ltdc_color_t color; - osalSysLock(); - color = ltdcBgGetKeyingColorI(ltdcp); - osalSysUnlock(); - return color; -} - -/** - * @brief Set background layer color key. - * @details Sets the color key of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c color key, RGB-888 - * - * @iclass - */ -void ltdcBgSetKeyingColorI(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CKCR = ((LTDC_Layer1->CKCR & ~0x00FFFFFF) | - ((uint32_t)c & 0x00FFFFFF)); -} - -/** - * @brief Set background layer color key. - * @details Sets the color key of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c color key, RGB-888 - * - * @api - */ -void ltdcBgSetKeyingColor(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalSysLock(); - ltdcBgSetKeyingColorI(ltdcp, c); - osalSysUnlock(); -} - -/** - * @brief Get background layer constant alpha. - * @details Gets the constant alpha component of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return constant alpha component, A-8 - * - * @iclass - */ -uint8_t ltdcBgGetConstantAlphaI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (uint8_t)(LTDC_Layer1->CACR & LTDC_LxCACR_CONSTA); -} - -/** - * @brief Get background layer constant alpha. - * @details Gets the constant alpha component of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return constant alpha component, A-8 - * - * @api - */ -uint8_t ltdcBgGetConstantAlpha(LTDCDriver *ltdcp) { - - uint8_t a; - osalSysLock(); - a = ltdcBgGetConstantAlphaI(ltdcp); - osalSysUnlock(); - return a; -} - -/** - * @brief Set background layer constant alpha. - * @details Sets the constant alpha component of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] a constant alpha component, A-8 - * - * @iclass - */ -void ltdcBgSetConstantAlphaI(LTDCDriver *ltdcp, uint8_t a) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CACR = ((LTDC_Layer1->CACR & ~LTDC_LxCACR_CONSTA) | - ((uint32_t)a & LTDC_LxCACR_CONSTA)); -} - -/** - * @brief Set background layer constant alpha. - * @details Sets the constant alpha component of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] a constant alpha component, A-8 - * - * @api - */ -void ltdcBgSetConstantAlpha(LTDCDriver *ltdcp, uint8_t a) { - - osalSysLock(); - ltdcBgSetConstantAlphaI(ltdcp, a); - osalSysUnlock(); -} - -/** - * @brief Get background layer default color. - * @details Gets the default color of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return default color, RGB-888 - * - * @iclass - */ -ltdc_color_t ltdcBgGetDefaultColorI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_color_t)LTDC_Layer1->DCCR; -} - -/** - * @brief Get background layer default color. - * @details Gets the default color of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return default color, RGB-888 - * - * @api - */ -ltdc_color_t ltdcBgGetDefaultColor(LTDCDriver *ltdcp) { - - ltdc_color_t color; - osalSysLock(); - color = ltdcBgGetDefaultColorI(ltdcp); - osalSysUnlock(); - return color; -} - -/** - * @brief Set background layer default color. - * @details Sets the default color of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c default color, RGB-888 - * - * @iclass - */ -void ltdcBgSetDefaultColorI(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->DCCR = (uint32_t)c; -} - -/** - * @brief Set background layer default color. - * @details Sets the default color of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c default color, RGB-888 - * - * @api - */ -void ltdcBgSetDefaultColor(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalSysLock(); - ltdcBgSetDefaultColorI(ltdcp, c); - osalSysUnlock(); -} - -/** - * @brief Get background layer blending factors. - * @details Gets the blending factors of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return blending factors - * - * @iclass - */ -ltdc_blendf_t ltdcBgGetBlendingFactorsI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_blendf_t)(LTDC_Layer1->BFCR & LTDC_LxBFCR_BF); -} - -/** - * @brief Get background layer blending factors. - * @details Gets the blending factors of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return blending factors - * - * @api - */ -ltdc_blendf_t ltdcBgGetBlendingFactors(LTDCDriver *ltdcp) { - - ltdc_blendf_t bf; - osalSysLock(); - bf = ltdcBgGetBlendingFactorsI(ltdcp); - osalSysUnlock(); - return bf; -} - -/** - * @brief Set background layer blending factors. - * @details Sets the blending factors of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] factors blending factors - * - * @iclass - */ -void ltdcBgSetBlendingFactorsI(LTDCDriver *ltdcp, ltdc_blendf_t bf) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->BFCR = ((LTDC_Layer1->BFCR & ~LTDC_LxBFCR_BF) | - ((uint32_t)bf & LTDC_LxBFCR_BF)); -} - -/** - * @brief Set background layer blending factors. - * @details Sets the blending factors of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] factors blending factors - * - * @api - */ -void ltdcBgSetBlendingFactors(LTDCDriver *ltdcp, ltdc_blendf_t bf) { - - osalSysLock(); - ltdcBgSetBlendingFactorsI(ltdcp, bf); - osalSysUnlock(); -} - -/** - * @brief Get background layer window specs. - * @details Gets the window specifications of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] windowp pointer to the window specifications - * - * @iclass - */ -void ltdcBgGetWindowI(LTDCDriver *ltdcp, ltdc_window_t *windowp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(windowp != NULL); - (void)ltdcp; - - windowp->hstart = - (uint16_t)((LTDC_Layer1->WHPCR & LTDC_LxWHPCR_WHSTPOS) >> 0); - windowp->hstop = - (uint16_t)((LTDC_Layer1->WHPCR & LTDC_LxWHPCR_WHSPPOS) >> 16); - windowp->vstart = - (uint16_t)((LTDC_Layer1->WVPCR & LTDC_LxWVPCR_WVSTPOS) >> 0); - windowp->vstop = - (uint16_t)((LTDC_Layer1->WVPCR & LTDC_LxWVPCR_WVSPPOS) >> 16); -} - -/** - * @brief Get background layer window specs. - * @details Gets the window specifications of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] windowp pointer to the window specifications - * - * @api - */ -void ltdcBgGetWindow(LTDCDriver *ltdcp, ltdc_window_t *windowp) { - - osalSysLock(); - ltdcBgGetWindowI(ltdcp, windowp); - osalSysUnlock(); -} - -/** - * @brief Set background layer window specs. - * @details Sets the window specifications of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] windowp pointer to the window specifications - * - * @iclass - */ -void ltdcBgSetWindowI(LTDCDriver *ltdcp, const ltdc_window_t *windowp) { - - uint32_t start, stop; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(windowp != NULL); - (void)ltdcp; - - osalDbgAssert(windowp->hstop < ltdcp->config->screen_width, "bounds"); - osalDbgAssert(windowp->vstop < ltdcp->config->screen_height, "bounds"); - - /* Horizontal boundaries.*/ - start = (uint32_t)windowp->hstart + ltdcp->active_window.hstart; - stop = (uint32_t)windowp->hstop + ltdcp->active_window.hstart; - - osalDbgAssert(start >= ltdcp->active_window.hstart, "bounds"); - osalDbgAssert(stop <= ltdcp->active_window.hstop, "bounds"); - - LTDC_Layer1->WHPCR = (((start << 0) & LTDC_LxWHPCR_WHSTPOS) | - ((stop << 16) & LTDC_LxWHPCR_WHSPPOS)); - - /* Vertical boundaries.*/ - start = (uint32_t)windowp->vstart + ltdcp->active_window.vstart; - stop = (uint32_t)windowp->vstop + ltdcp->active_window.vstart; - - osalDbgAssert(start >= ltdcp->active_window.vstart, "bounds"); - osalDbgAssert(stop <= ltdcp->active_window.vstop, "bounds"); - - LTDC_Layer1->WVPCR = (((start << 0) & LTDC_LxWVPCR_WVSTPOS) | - ((stop << 16) & LTDC_LxWVPCR_WVSPPOS)); -} - -/** - * @brief Set background layer window specs. - * @details Sets the window specifications of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] windowp pointer to the window specifications - * - * @api - */ -void ltdcBgSetWindow(LTDCDriver *ltdcp, const ltdc_window_t *windowp) { - - osalSysLock(); - ltdcBgSetWindowI(ltdcp, windowp); - osalSysUnlock(); -} - -/** - * @brief Set background layer window as invalid. - * @details Sets the window specifications of the background layer (layer 1) - * so that the window is pixel sized at the screen origin. - * @note Useful before reconfiguring the frame specifications of the layer, - * to avoid errors. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcBgSetInvalidWindowI(LTDCDriver *ltdcp) { - - ltdcBgSetWindowI(ltdcp, <dc_invalid_window); -} - -/** - * @brief Set background layer window as invalid. - * @details Sets the window specifications of the background layer (layer 1) - * so that the window is pixel sized at the screen origin. - * @note Useful before reconfiguring the frame specifications of the layer, - * to avoid errors. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcBgSetInvalidWindow(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcBgSetWindowI(ltdcp, <dc_invalid_window); - osalSysUnlock(); -} - -/** - * @brief Get background layer frame buffer specs. - * @details Gets the frame buffer specifications of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] framep pointer to the frame buffer specifications - * - * @iclass - */ -void ltdcBgGetFrameI(LTDCDriver *ltdcp, ltdc_frame_t *framep) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(framep != NULL); - - framep->bufferp = (void *)(LTDC_Layer1->CFBAR & LTDC_LxCFBAR_CFBADD); - framep->pitch = (size_t)((LTDC_Layer1->CFBLR & LTDC_LxCFBLR_CFBP) >> 16); - framep->width = (uint16_t)(((LTDC_Layer1->CFBLR & LTDC_LxCFBLR_CFBLL) - 3) / - ltdcBytesPerPixel(ltdcBgGetPixelFormatI(ltdcp))); - framep->height = (uint16_t)(LTDC_Layer1->CFBLNR & LTDC_LxCFBLNR_CFBLNBR); -} - -/** - * @brief Get background layer frame buffer specs. - * @details Gets the frame buffer specifications of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] framep pointer to the frame buffer specifications - * - * @api - */ -void ltdcBgGetFrame(LTDCDriver *ltdcp, ltdc_frame_t *framep) { - - osalSysLock(); - ltdcBgGetFrameI(ltdcp, framep); - osalSysUnlock(); -} - -/** - * @brief Set background layer frame buffer specs. - * @details Sets the frame buffer specifications of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] framep pointer to the frame buffer specifications - * - * @iclass - */ -void ltdcBgSetFrameI(LTDCDriver *ltdcp, const ltdc_frame_t *framep) { - - size_t linesize; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(framep != NULL); - - ltdcBgSetPixelFormatI(ltdcp, framep->fmt); - - linesize = ltdcBytesPerPixel(framep->fmt) * framep->width; - - osalDbgAssert(framep->width <= ltdcp->config->screen_width, "bounds"); - osalDbgAssert(framep->height <= ltdcp->config->screen_height, "bounds"); - osalDbgAssert(linesize >= LTDC_MIN_FRAME_WIDTH_BYTES, "bounds"); - osalDbgAssert(linesize <= LTDC_MAX_FRAME_WIDTH_BYTES, "bounds"); - osalDbgAssert(framep->height >= LTDC_MIN_FRAME_HEIGHT_LINES, "bounds"); - osalDbgAssert(framep->height <= LTDC_MAX_FRAME_HEIGHT_LINES, "bounds"); - osalDbgAssert(framep->pitch >= linesize, "bounds"); - - LTDC_Layer1->CFBAR = (uint32_t)framep->bufferp & LTDC_LxCFBAR_CFBADD; - LTDC_Layer1->CFBLR = ((((uint32_t)framep->pitch << 16) & LTDC_LxCFBLR_CFBP) | - ((linesize + 3) & LTDC_LxCFBLR_CFBLL)); - LTDC_Layer1->CFBLNR = (uint32_t)framep->height & LTDC_LxCFBLNR_CFBLNBR; -} - -/** - * @brief Set background layer frame buffer specs. - * @details Sets the frame buffer specifications of the background layer - * (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] framep pointer to the frame buffer specifications - * - * @api - */ -void ltdcBgSetFrame(LTDCDriver *ltdcp, const ltdc_frame_t *framep) { - - osalSysLock(); - ltdcBgSetFrameI(ltdcp, framep); - osalSysUnlock(); -} - -/** - * @brief Get background layer frame buffer address. - * @details Gets the frame buffer address of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return frame buffer address - * - * @iclass - */ -void *ltdcBgGetFrameAddressI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (void *)LTDC_Layer1->CFBAR; -} - -/** - * @brief Get background layer frame buffer address. - * @details Gets the frame buffer address of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return frame buffer address - * - * @api - */ -void *ltdcBgGetFrameAddress(LTDCDriver *ltdcp) { - - void *bufferp; - osalSysLock(); - bufferp = ltdcBgGetFrameAddressI(ltdcp); - osalSysUnlock(); - return bufferp; -} - -/** - * @brief Set background layer frame buffer address. - * @details Sets the frame buffer address of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] bufferp frame buffer address - * - * @iclass - */ -void ltdcBgSetFrameAddressI(LTDCDriver *ltdcp, void *bufferp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer1->CFBAR = (uint32_t)bufferp; -} - -/** - * @brief Set background layer frame buffer address. - * @details Sets the frame buffer address of the background layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] bufferp frame buffer address - * - * @api - */ -void ltdcBgSetFrameAddress(LTDCDriver *ltdcp, void *bufferp) { - - osalSysLock(); - ltdcBgSetFrameAddressI(ltdcp, bufferp); - osalSysUnlock(); -} - -/** - * @brief Get background layer specifications. - * @details Gets the background layer (layer 1) specifications at once. - * @note If palette specifications cannot be retrieved, they are set to - * @p NULL. This is not an error. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @iclass - */ -void ltdcBgGetLayerI(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(cfgp != NULL); - - ltdcBgGetFrameI(ltdcp, (ltdc_frame_t *)cfgp->frame); - ltdcBgGetWindowI(ltdcp, (ltdc_window_t *)cfgp->window); - cfgp->def_color = ltdcBgGetDefaultColorI(ltdcp); - cfgp->key_color = ltdcBgGetKeyingColorI(ltdcp); - cfgp->const_alpha = ltdcBgGetConstantAlphaI(ltdcp); - cfgp->blending = ltdcBgGetBlendingFactorsI(ltdcp); - - cfgp->pal_colors = NULL; - cfgp->pal_length = 0; - - cfgp->flags = ltdcBgGetEnableFlagsI(ltdcp); -} - -/** - * @brief Get background layer specifications. - * @details Gets the background layer (layer 1) specifications at once. - * @note If palette specifications cannot be retrieved, they are set to - * @p NULL. This is not an error. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @api - */ -void ltdcBgGetLayer(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp) { - - osalSysLock(); - ltdcBgGetLayerI(ltdcp, cfgp); - osalSysUnlock(); -} - -/** - * @brief Set background layer specifications. - * @details Sets the background layer (layer 1) specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @iclass - */ -void ltdcBgSetConfigI(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - - if (cfgp == NULL) - cfgp = <dc_default_laycfg; - - osalDbgCheck((cfgp->pal_colors == NULL) == (cfgp->pal_length == 0)); - - ltdcBgSetFrameI(ltdcp, cfgp->frame); - ltdcBgSetWindowI(ltdcp, cfgp->window); - ltdcBgSetDefaultColorI(ltdcp, cfgp->def_color); - ltdcBgSetKeyingColorI(ltdcp, cfgp->key_color); - ltdcBgSetConstantAlphaI(ltdcp, cfgp->const_alpha); - ltdcBgSetBlendingFactorsI(ltdcp, cfgp->blending); - - if (cfgp->pal_length > 0) - ltdcBgSetPaletteI(ltdcp, cfgp->pal_colors, cfgp->pal_length); - - ltdcBgSetEnableFlagsI(ltdcp, cfgp->flags); -} - -/** - * @brief Set background layer specifications. - * @details Sets the background layer (layer 1) specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @api - */ -void ltdcBgSetConfig(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp) { - - osalSysLock(); - ltdcBgSetConfigI(ltdcp, cfgp); - osalSysUnlock(); -} - -/** @} */ - -/** - * @name LTDC foreground layer (layer 2) methods - * @{ - */ - -/** - * @brief Get foreground layer enabled flags. - * @details Returns all the flags of the LTDC_LEF_* group at once. - * Targeting the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled flags - * - * @iclass - */ -ltdc_flags_t ltdcFgGetEnableFlagsI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return LTDC_Layer2->CR & LTDC_LEF_MASK; -} - -/** - * @brief Get foreground layer enabled flags. - * @details Returns all the flags of the LTDC_LEF_* group at once. - * Targeting the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled flags - * - * @api - */ -ltdc_flags_t ltdcFgGetEnableFlags(LTDCDriver *ltdcp) { - - ltdc_flags_t flags; - osalSysLock(); - flags = ltdcFgGetEnableFlagsI(ltdcp); - osalSysUnlock(); - return flags; -} - -/** - * @brief Set foreground layer enabled flags. - * @details Sets all the flags of the LTDC_LEF_* group at once. - * Targeting the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] flags enabled flags - * - * @iclass - */ -void ltdcFgSetEnableFlagsI(LTDCDriver *ltdcp, ltdc_flags_t flags) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR = ((LTDC_Layer2->CR & ~LTDC_LEF_MASK) | - ((uint32_t)flags & LTDC_LEF_MASK)); -} - -/** - * @brief Set foreground layer enabled flags. - * @details Sets all the flags of the LTDC_LEF_* group at once. - * Targeting the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] flags enabled flags - * - * @api - */ -void ltdcFgSetEnableFlags(LTDCDriver *ltdcp, ltdc_flags_t flags) { - - osalSysLock(); - ltdcFgSetEnableFlagsI(ltdcp, flags); - osalSysUnlock(); -} - -/** - * @brief Foreground layer enabled. - * @details Tells whether the foreground layer (layer 2) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcFgIsEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC_Layer2->CR & ~LTDC_LxCR_LEN) != 0; -} - -/** - * @brief Foreground layer enabled. - * @details Tells whether the foreground layer (layer 2) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcFgIsEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcFgIsEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Foreground layer enable. - * @details Enables the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgEnableI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR |= LTDC_LxCR_LEN; -} - -/** - * @brief Foreground layer enable. - * @details Enables the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgEnable(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgEnableI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Foreground layer disable. - * @details Disables the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgDisableI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR &= ~LTDC_LxCR_LEN; -} - -/** - * @brief Foreground layer disable. - * @details Disables the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgDisable(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgDisableI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Foreground layer palette enabled. - * @details Tells whether the foreground layer (layer 2) palette (color lookup - * table) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcFgIsPaletteEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC_Layer2->CR & ~LTDC_LxCR_CLUTEN) != 0; -} - -/** - * @brief Foreground layer palette enabled. - * @details Tells whether the foreground layer (layer 2) palette (color lookup - * table) is enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcFgIsPaletteEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcFgIsPaletteEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Enable foreground layer palette. - * @details Enables the palette (color lookup table) of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgEnablePaletteI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR |= LTDC_LxCR_CLUTEN; -} - -/** - * @brief Enable foreground layer palette. - * @details Enables the palette (color lookup table) of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgEnablePalette(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgEnablePaletteI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Disable foreground layer palette. - * @details Disables the palette (color lookup table) of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgDisablePaletteI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR &= ~LTDC_LxCR_CLUTEN; -} - -/** - * @brief Disable foreground layer palette. - * @details Disables the palette (color lookup table) of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgDisablePalette(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgDisablePaletteI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Set foreground layer palette color. - * @details Sets the color of a palette (color lookup table) slot to the - * foreground layer (layer 2). - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] slot palette slot - * @param[in] c color, RGB-888 - * - * @iclass - */ -void ltdcFgSetPaletteColorI(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgAssert(!ltdcFgIsEnabledI(ltdcp), "invalid state"); - (void)ltdcp; - - LTDC_Layer2->CLUTWR = (((uint32_t)slot << 24) | (c & 0x00FFFFFF)); -} - -/** - * @brief Set foreground layer palette color. - * @details Sets the color of a palette (color lookup table) slot to the - * foreground layer (layer 2). - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] slot palette slot - * @param[in] c color, RGB-888 - * - * @api - */ -void ltdcFgSetPaletteColor(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c) { - - osalSysLock(); - ltdcFgSetPaletteColorI(ltdcp, slot, c); - osalSysUnlock(); -} - -/** - * @brief Set foreground layer palette. - * @details Sets the entire palette color (color lookup table) slot. - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] colors array of palette colors, RGB-888 - * @param[in] length number of palette colors - * - * @iclass - */ -void ltdcFgSetPaletteI(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length) { - - uint16_t i; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck((colors == NULL) == (length == 0)); - osalDbgAssert(length <= LTDC_MAX_PALETTE_LENGTH, "bounds"); - osalDbgAssert(!ltdcFgIsEnabledI(ltdcp), "invalid state"); - (void)ltdcp; - - for (i = 0; i < length; ++i) - LTDC_Layer2->CLUTWR = (((uint32_t)i << 24) | (colors[i] & 0x00FFFFFF)); -} - -/** - * @brief Set foreground layer palette. - * @details Sets the entire palette color (color lookup table) slot. - * @pre The layer must be disabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] colors array of palette colors, RGB-888 - * @param[in] length number of palette colors - * - * @api - */ -void ltdcFgSetPalette(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length) { - - osalSysLock(); - ltdcFgSetPaletteI(ltdcp, colors, length); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer pixel format. - * @details Gets the pixel format of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return pixel format - * - * @iclass - */ -ltdc_pixfmt_t ltdcFgGetPixelFormatI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_pixfmt_t)(LTDC_Layer2->PFCR & LTDC_LxPFCR_PF); -} - -/** - * @brief Get foreground layer pixel format. - * @details Gets the pixel format of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return pixel format - * - * @api - */ -ltdc_pixfmt_t ltdcFgGetPixelFormat(LTDCDriver *ltdcp) { - - ltdc_pixfmt_t fmt; - osalSysLock(); - fmt = ltdcFgGetPixelFormatI(ltdcp); - osalSysUnlock(); - return fmt; -} - -/** - * @brief Set foreground layer pixel format. - * @details Sets the pixel format of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] fmt pixel format - * - * @iclass - */ -void ltdcFgSetPixelFormatI(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgAssert(fmt >= LTDC_MIN_PIXFMT_ID, "bounds"); - osalDbgAssert(fmt <= LTDC_MAX_PIXFMT_ID, "bounds"); - (void)ltdcp; - - LTDC_Layer2->PFCR = ((LTDC_Layer2->PFCR & ~LTDC_LxPFCR_PF) | - ((uint32_t)fmt & LTDC_LxPFCR_PF)); -} - -/** - * @brief Set foreground layer pixel format. - * @details Sets the pixel format of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] fmt pixel format - * - * @api - */ -void ltdcFgSetPixelFormat(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt) { - - osalSysLock(); - ltdcFgSetPixelFormatI(ltdcp, fmt); - osalSysUnlock(); -} - -/** - * @brief Foreground layer color keying enabled. - * @details Tells whether the foreground layer (layer 2) has color keying - * enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @iclass - */ -bool ltdcFgIsKeyingEnabledI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (LTDC_Layer2->CR & ~LTDC_LxCR_COLKEN) != 0; -} - -/** - * @brief Foreground layer color keying enabled. - * @details Tells whether the foreground layer (layer 2) has color keying - * enabled. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return enabled - * - * @api - */ -bool ltdcFgIsKeyingEnabled(LTDCDriver *ltdcp) { - - bool enabled; - osalSysLock(); - enabled = ltdcFgIsKeyingEnabledI(ltdcp); - osalSysUnlock(); - return enabled; -} - -/** - * @brief Enable foreground layer color keying. - * @details Enables color keying capabilities of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgEnableKeyingI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR |= LTDC_LxCR_COLKEN; -} - -/** - * @brief Enable foreground layer color keying. - * @details Enables color keying capabilities of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgEnableKeying(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgEnableKeyingI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Disable foreground layer color keying. - * @details Disables color keying capabilities of the foreground layer (layer - * 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgDisableKeyingI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CR &= ~LTDC_LxCR_COLKEN; -} - -/** - * @brief Disable foreground layer color keying. - * @details Disables color keying capabilities of the foreground layer (layer - * 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgDisableKeying(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgDisableKeyingI(ltdcp); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer color key. - * @details Gets the color key of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return color key, RGB-888 - * - * @iclass - */ -ltdc_color_t ltdcFgGetKeyingColorI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_color_t)(LTDC_Layer2->CKCR & 0x00FFFFFF); -} - -/** - * @brief Get foreground layer color key. - * @details Gets the color key of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return color key, RGB-888 - * - * @api - */ -ltdc_color_t ltdcFgGetKeyingColor(LTDCDriver *ltdcp) { - - ltdc_color_t color; - osalSysLock(); - color = ltdcFgGetKeyingColorI(ltdcp); - osalSysUnlock(); - return color; -} - -/** - * @brief Set foreground layer color key. - * @details Sets the color key of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c color key, RGB-888 - * - * @iclass - */ -void ltdcFgSetKeyingColorI(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CKCR = ((LTDC_Layer2->CKCR & ~0x00FFFFFF) | - ((uint32_t)c & 0x00FFFFFF)); -} - -/** - * @brief Set foreground layer color key. - * @details Sets the color key of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c color key, RGB-888 - * - * @api - */ -void ltdcFgSetKeyingColor(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalSysLock(); - ltdcFgSetKeyingColorI(ltdcp, c); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer constant alpha. - * @details Gets the constant alpha component of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return constant alpha component, A-8 - * - * @iclass - */ -uint8_t ltdcFgGetConstantAlphaI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (uint8_t)(LTDC_Layer2->CACR & LTDC_LxCACR_CONSTA); -} - -/** - * @brief Get foreground layer constant alpha. - * @details Gets the constant alpha component of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return constant alpha component, A-8 - * - * @api - */ -uint8_t ltdcFgGetConstantAlpha(LTDCDriver *ltdcp) { - - uint8_t a; - osalSysLock(); - a = ltdcFgGetConstantAlphaI(ltdcp); - osalSysUnlock(); - return a; -} - -/** - * @brief Set foreground layer constant alpha. - * @details Sets the constant alpha component of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] a constant alpha component, A-8 - * - * @iclass - */ -void ltdcFgSetConstantAlphaI(LTDCDriver *ltdcp, uint8_t a) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CACR = ((LTDC_Layer2->CACR & ~LTDC_LxCACR_CONSTA) | - ((uint32_t)a & LTDC_LxCACR_CONSTA)); -} - -/** - * @brief Set foreground layer constant alpha. - * @details Sets the constant alpha component of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] a constant alpha component, A-8 - * - * @api - */ -void ltdcFgSetConstantAlpha(LTDCDriver *ltdcp, uint8_t a) { - - osalSysLock(); - ltdcFgSetConstantAlphaI(ltdcp, a); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer default color. - * @details Gets the default color of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return default color, RGB-888 - * - * @iclass - */ -ltdc_color_t ltdcFgGetDefaultColorI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_color_t)LTDC_Layer2->DCCR; -} - -/** - * @brief Get foreground layer default color. - * @details Gets the default color of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return default color, RGB-888 - * - * @api - */ -ltdc_color_t ltdcFgGetDefaultColor(LTDCDriver *ltdcp) { - - ltdc_color_t color; - osalSysLock(); - color = ltdcFgGetDefaultColorI(ltdcp); - osalSysUnlock(); - return color; -} - -/** - * @brief Set foreground layer default color. - * @details Sets the default color of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c default color, RGB-888 - * - * @iclass - */ -void ltdcFgSetDefaultColorI(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->DCCR = (uint32_t)c; -} - -/** - * @brief Set foreground layer default color. - * @details Sets the default color of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] c default color, RGB-888 - * - * @api - */ -void ltdcFgSetDefaultColor(LTDCDriver *ltdcp, ltdc_color_t c) { - - osalSysLock(); - ltdcFgSetDefaultColorI(ltdcp, c); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer blending factors. - * @details Gets the blending factors of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return blending factors - * - * @iclass - */ -ltdc_blendf_t ltdcFgGetBlendingFactorsI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (ltdc_blendf_t)(LTDC_Layer2->BFCR & LTDC_LxBFCR_BF); -} - -/** - * @brief Get foreground layer blending factors. - * @details Gets the blending factors of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return blending factors - * - * @api - */ -ltdc_blendf_t ltdcFgGetBlendingFactors(LTDCDriver *ltdcp) { - - ltdc_blendf_t bf; - osalSysLock(); - bf = ltdcFgGetBlendingFactorsI(ltdcp); - osalSysUnlock(); - return bf; -} - -/** - * @brief Set foreground layer blending factors. - * @details Sets the blending factors of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] factors blending factors - * - * @iclass - */ -void ltdcFgSetBlendingFactorsI(LTDCDriver *ltdcp, ltdc_blendf_t bf) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->BFCR = ((LTDC_Layer2->BFCR & ~LTDC_LxBFCR_BF) | - ((uint32_t)bf & LTDC_LxBFCR_BF)); -} - -/** - * @brief Set foreground layer blending factors. - * @details Sets the blending factors of the foreground layer (layer 1). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] factors blending factors - * - * @api - */ -void ltdcFgSetBlendingFactors(LTDCDriver *ltdcp, ltdc_blendf_t bf) { - - osalSysLock(); - ltdcFgSetBlendingFactorsI(ltdcp, bf); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer window specs. - * @details Gets the window specifications of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] windowp pointer to the window specifications - * - * @iclass - */ -void ltdcFgGetWindowI(LTDCDriver *ltdcp, ltdc_window_t *windowp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(windowp != NULL); - (void)ltdcp; - - windowp->hstart = - (uint16_t)((LTDC_Layer2->WHPCR & LTDC_LxWHPCR_WHSTPOS) >> 0); - windowp->hstop = - (uint16_t)((LTDC_Layer2->WHPCR & LTDC_LxWHPCR_WHSPPOS) >> 16); - windowp->vstart = - (uint16_t)((LTDC_Layer2->WVPCR & LTDC_LxWVPCR_WVSTPOS) >> 0); - windowp->vstop = - (uint16_t)((LTDC_Layer2->WVPCR & LTDC_LxWVPCR_WVSPPOS) >> 16); -} - -/** - * @brief Get foreground layer window specs. - * @details Gets the window specifications of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] windowp pointer to the window specifications - * - * @api - */ -void ltdcFgGetWindow(LTDCDriver *ltdcp, ltdc_window_t *windowp) { - - osalSysLock(); - ltdcFgGetWindowI(ltdcp, windowp); - osalSysUnlock(); -} - -/** - * @brief Set foreground layer window specs. - * @details Sets the window specifications of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] windowp pointer to the window specifications - * - * @iclass - */ -void ltdcFgSetWindowI(LTDCDriver *ltdcp, const ltdc_window_t *windowp) { - - uint32_t start, stop; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(windowp != NULL); - (void)ltdcp; - - osalDbgAssert(windowp->hstop < ltdcp->config->screen_width, "bounds"); - osalDbgAssert(windowp->vstop < ltdcp->config->screen_height, "bounds"); - - /* Horizontal boundaries.*/ - start = (uint32_t)windowp->hstart + ltdcp->active_window.hstart; - stop = (uint32_t)windowp->hstop + ltdcp->active_window.hstart; - - osalDbgAssert(start >= ltdcp->active_window.hstart, "bounds"); - osalDbgAssert(stop <= ltdcp->active_window.hstop, "bounds"); - - LTDC_Layer2->WHPCR = (((start << 0) & LTDC_LxWHPCR_WHSTPOS) | - ((stop << 16) & LTDC_LxWHPCR_WHSPPOS)); - - /* Vertical boundaries.*/ - start = (uint32_t)windowp->vstart + ltdcp->active_window.vstart; - stop = (uint32_t)windowp->vstop + ltdcp->active_window.vstart; - - osalDbgAssert(start >= ltdcp->active_window.vstart, "bounds"); - osalDbgAssert(stop <= ltdcp->active_window.vstop, "bounds"); - - LTDC_Layer2->WVPCR = (((start << 0) & LTDC_LxWVPCR_WVSTPOS) | - ((stop << 16) & LTDC_LxWVPCR_WVSPPOS)); -} - -/** - * @brief Set foreground layer window specs. - * @details Sets the window specifications of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] windowp pointer to the window specifications - * - * @api - */ -void ltdcFgSetWindow(LTDCDriver *ltdcp, const ltdc_window_t *windowp) { - - osalSysLock(); - ltdcFgSetWindowI(ltdcp, windowp); - osalSysUnlock(); -} - -/** - * @brief Set foreground layer window as invalid. - * @details Sets the window specifications of the foreground layer (layer 2) - * so that the window is pixel sized at the screen origin. - * @note Useful before reconfiguring the frame specifications of the layer, - * to avoid errors. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @iclass - */ -void ltdcFgSetInvalidWindowI(LTDCDriver *ltdcp) { - - ltdcFgSetWindowI(ltdcp, <dc_invalid_window); -} - -/** - * @brief Set foreground layer window as invalid. - * @details Sets the window specifications of the foreground layer (layer 2) - * so that the window is pixel sized at the screen origin. - * @note Useful before reconfiguring the frame specifications of the layer, - * to avoid errors. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @api - */ -void ltdcFgSetInvalidWindow(LTDCDriver *ltdcp) { - - osalSysLock(); - ltdcFgSetWindowI(ltdcp, <dc_invalid_window); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer frame buffer specs. - * @details Gets the frame buffer specifications of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] framep pointer to the frame buffer specifications - * - * @iclass - */ -void ltdcFgGetFrameI(LTDCDriver *ltdcp, ltdc_frame_t *framep) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(framep != NULL); - - framep->bufferp = (void *)(LTDC_Layer2->CFBAR & LTDC_LxCFBAR_CFBADD); - framep->pitch = (size_t)((LTDC_Layer2->CFBLR & LTDC_LxCFBLR_CFBP) >> 16); - framep->width = (uint16_t)(((LTDC_Layer2->CFBLR & LTDC_LxCFBLR_CFBLL) - 3) / - ltdcBytesPerPixel(ltdcFgGetPixelFormatI(ltdcp))); - framep->height = (uint16_t)(LTDC_Layer2->CFBLNR & LTDC_LxCFBLNR_CFBLNBR); -} - -/** - * @brief Get foreground layer frame buffer specs. - * @details Gets the frame buffer specifications of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] framep pointer to the frame buffer specifications - * - * @api - */ -void ltdcFgGetFrame(LTDCDriver *ltdcp, ltdc_frame_t *framep) { - - osalSysLock(); - ltdcFgGetFrameI(ltdcp, framep); - osalSysUnlock(); -} - -/** - * @brief Set foreground layer frame buffer specs. - * @details Sets the frame buffer specifications of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] framep pointer to the frame buffer specifications - * - * @iclass - */ -void ltdcFgSetFrameI(LTDCDriver *ltdcp, const ltdc_frame_t *framep) { - - size_t linesize; - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(framep != NULL); - - ltdcFgSetPixelFormatI(ltdcp, framep->fmt); - - linesize = ltdcBytesPerPixel(framep->fmt) * framep->width; - - osalDbgAssert(framep->width <= ltdcp->config->screen_width, "bounds"); - osalDbgAssert(framep->height <= ltdcp->config->screen_height, "bounds"); - osalDbgAssert(linesize >= LTDC_MIN_FRAME_WIDTH_BYTES, "bounds"); - osalDbgAssert(linesize <= LTDC_MAX_FRAME_WIDTH_BYTES, "bounds"); - osalDbgAssert(framep->height >= LTDC_MIN_FRAME_HEIGHT_LINES, "bounds"); - osalDbgAssert(framep->height <= LTDC_MAX_FRAME_HEIGHT_LINES, "bounds"); - osalDbgAssert(framep->pitch >= linesize, "bounds"); - - LTDC_Layer2->CFBAR = (uint32_t)framep->bufferp & LTDC_LxCFBAR_CFBADD; - LTDC_Layer2->CFBLR = ((((uint32_t)framep->pitch << 16) & LTDC_LxCFBLR_CFBP) | - ((linesize + 3) & LTDC_LxCFBLR_CFBLL)); - LTDC_Layer2->CFBLNR = (uint32_t)framep->height & LTDC_LxCFBLNR_CFBLNBR; -} - -/** - * @brief Set foreground layer frame buffer specs. - * @details Sets the frame buffer specifications of the foreground layer - * (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] framep pointer to the frame buffer specifications - * - * @api - */ -void ltdcFgSetFrame(LTDCDriver *ltdcp, const ltdc_frame_t *framep) { - - osalSysLock(); - ltdcFgSetFrameI(ltdcp, framep); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer frame buffer address. - * @details Gets the frame buffer address of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return frame buffer address - * - * @iclass - */ -void *ltdcFgGetFrameAddressI(LTDCDriver *ltdcp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - return (void *)LTDC_Layer2->CFBAR; -} - -/** - * @brief Get foreground layer frame buffer address. - * @details Gets the frame buffer address of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * - * @return frame buffer address - * - * @api - */ -void *ltdcFgGetFrameAddress(LTDCDriver *ltdcp) { - - void *bufferp; - osalSysLock(); - bufferp = ltdcFgGetFrameAddressI(ltdcp); - osalSysUnlock(); - return bufferp; -} - -/** - * @brief Set foreground layer frame buffer address. - * @details Sets the frame buffer address of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] bufferp frame buffer address - * - * @iclass - */ -void ltdcFgSetFrameAddressI(LTDCDriver *ltdcp, void *bufferp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - (void)ltdcp; - - LTDC_Layer2->CFBAR = (uint32_t)bufferp; -} - -/** - * @brief Set foreground layer frame buffer address. - * @details Sets the frame buffer address of the foreground layer (layer 2). - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] bufferp frame buffer address - * - * @api - */ -void ltdcFgSetFrameAddress(LTDCDriver *ltdcp, void *bufferp) { - - osalSysLock(); - ltdcFgSetFrameAddressI(ltdcp, bufferp); - osalSysUnlock(); -} - -/** - * @brief Get foreground layer specifications. - * @details Gets the foreground layer (layer 2) specifications at once. - * @note If palette specifications cannot be retrieved, they are set to - * @p NULL. This is not an error. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @iclass - */ -void ltdcFgGetLayerI(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - osalDbgCheck(cfgp != NULL); - - ltdcFgGetFrameI(ltdcp, (ltdc_frame_t *)cfgp->frame); - ltdcFgGetWindowI(ltdcp, (ltdc_window_t *)cfgp->window); - cfgp->def_color = ltdcFgGetDefaultColorI(ltdcp); - cfgp->key_color = ltdcFgGetKeyingColorI(ltdcp); - cfgp->const_alpha = ltdcFgGetConstantAlphaI(ltdcp); - cfgp->blending = ltdcFgGetBlendingFactorsI(ltdcp); - - cfgp->pal_colors = NULL; - cfgp->pal_length = 0; - - cfgp->flags = ltdcFgGetEnableFlagsI(ltdcp); -} - -/** - * @brief Get foreground layer specifications. - * @details Gets the foreground layer (layer 2) specifications at once. - * @note If palette specifications cannot be retrieved, they are set to - * @p NULL. This is not an error. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[out] cfgp pointer to the layer specifications - * - * @api - */ -void ltdcFgGetLayer(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp) { - - osalSysLock(); - ltdcFgGetLayerI(ltdcp, cfgp); - osalSysUnlock(); -} - -/** - * @brief Set foreground layer specifications. - * @details Sets the foreground layer (layer 2) specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @iclass - */ -void ltdcFgSetConfigI(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp) { - - osalDbgCheckClassI(); - osalDbgCheck(ltdcp == <DCD1); - - if (cfgp == NULL) - cfgp = <dc_default_laycfg; - - osalDbgCheck((cfgp->pal_colors == NULL) == (cfgp->pal_length == 0)); - - ltdcFgSetFrameI(ltdcp, cfgp->frame); - ltdcFgSetWindowI(ltdcp, cfgp->window); - ltdcFgSetDefaultColorI(ltdcp, cfgp->def_color); - ltdcFgSetKeyingColorI(ltdcp, cfgp->key_color); - ltdcFgSetConstantAlphaI(ltdcp, cfgp->const_alpha); - ltdcFgSetBlendingFactorsI(ltdcp, cfgp->blending); - - if (cfgp->pal_length > 0) - ltdcFgSetPaletteI(ltdcp, cfgp->pal_colors, cfgp->pal_length); - - ltdcFgSetEnableFlagsI(ltdcp, cfgp->flags); -} - -/** - * @brief Set foreground layer specifications. - * @details Sets the foreground layer (layer 2) specifications at once. - * @note If the palette is unspecified, the layer palette is unmodified. - * - * @param[in] ltdcp pointer to the @p LTDCDriver object - * @param[in] cfgp pointer to the layer specifications - * - * @api - */ -void ltdcFgSetConfig(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp) { - - osalSysLock(); - ltdcFgSetConfigI(ltdcp, cfgp); - osalSysUnlock(); -} - -/** @} */ - -/** - * @name LTDC helper functions - */ - -/** - * @brief Compute bits per pixel. - * @details Computes the bits per pixel for the specified pixel format. - * - * @param[in] fmt pixel format - * - * @retuen bits per pixel - * - * @api - */ -size_t ltdcBitsPerPixel(ltdc_pixfmt_t fmt) { - - osalDbgAssert(fmt < LTDC_MAX_PIXFMT_ID, "invalid format"); - - return (size_t)ltdc_bpp[(unsigned)fmt]; -} - -#if (TRUE == LTDC_USE_SOFTWARE_CONVERSIONS) || defined(__DOXYGEN__) - -/** - * @brief Convert from ARGB-8888. - * @details Converts an ARGB-8888 color to the specified pixel format. - * - * @param[in] c color, ARGB-8888 - * @param[in] fmt target pixel format - * - * @return raw color value for the target pixel format, left - * padded with zeros. - * - * @api - */ -ltdc_color_t ltdcFromARGB8888(ltdc_color_t c, ltdc_pixfmt_t fmt) { - - switch (fmt) { - case LTDC_FMT_ARGB8888: { - return c; - } - case LTDC_FMT_RGB888: { - return (c & 0x00FFFFFF); - } - case LTDC_FMT_RGB565: { - return (((c & 0x000000F8) >> ( 8 - 5)) | - ((c & 0x0000FC00) >> (16 - 11)) | - ((c & 0x00F80000) >> (24 - 16))); - } - case LTDC_FMT_ARGB1555: { - return (((c & 0x000000F8) >> ( 8 - 5)) | - ((c & 0x0000F800) >> (16 - 10)) | - ((c & 0x00F80000) >> (24 - 15)) | - ((c & 0x80000000) >> (32 - 16))); - } - case LTDC_FMT_ARGB4444: { - return (((c & 0x000000F0) >> ( 8 - 4)) | - ((c & 0x0000F000) >> (16 - 8)) | - ((c & 0x00F00000) >> (24 - 12)) | - ((c & 0xF0000000) >> (32 - 16))); - } - case LTDC_FMT_L8: { - return (c & 0x000000FF); - } - case LTDC_FMT_AL44: { - return (((c & 0x000000F0) >> ( 8 - 4)) | - ((c & 0xF0000000) >> (32 - 8))); - } - case LTDC_FMT_AL88: { - return (((c & 0x000000FF) >> ( 8 - 8)) | - ((c & 0xFF000000) >> (32 - 16))); - } - default: - osalDbgAssert(false, "invalid format"); - return 0; - } -} - -/** - * @brief Convert to ARGB-8888. - * @details Converts color of the specified pixel format to an ARGB-8888 color. - * - * @param[in] c color for the source pixel format, left padded with - * zeros. - * @param[in] fmt source pixel format - * - * @return color in ARGB-8888 format - * - * @api - */ -ltdc_color_t ltdcToARGB8888(ltdc_color_t c, ltdc_pixfmt_t fmt) { - - switch (fmt) { - case LTDC_FMT_ARGB8888: { - return c; - } - case LTDC_FMT_RGB888: { - return ((c & 0x00FFFFFF) | 0xFF000000); - } - case LTDC_FMT_RGB565: { - register ltdc_color_t output = 0xFF000000; - if (c & 0x001F) output |= (((c & 0x001F) << ( 8 - 5)) | 0x00000007); - if (c & 0x07E0) output |= (((c & 0x07E0) << (16 - 11)) | 0x00000300); - if (c & 0xF800) output |= (((c & 0xF800) << (24 - 16)) | 0x00070000); - return output; - } - case LTDC_FMT_ARGB1555: { - register ltdc_color_t output = 0x00000000; - if (c & 0x001F) output |= (((c & 0x001F) << ( 8 - 5)) | 0x00000007); - if (c & 0x03E0) output |= (((c & 0x03E0) << (16 - 10)) | 0x00000700); - if (c & 0x7C00) output |= (((c & 0x7C00) << (24 - 15)) | 0x00070000); - if (c & 0x8000) output |= 0xFF000000; - return output; - } - case LTDC_FMT_ARGB4444: { - register ltdc_color_t output = 0x00000000; - if (c & 0x000F) output |= (((c & 0x000F) << ( 8 - 4)) | 0x0000000F); - if (c & 0x00F0) output |= (((c & 0x00F0) << (16 - 8)) | 0x00000F00); - if (c & 0x0F00) output |= (((c & 0x0F00) << (24 - 12)) | 0x000F0000); - if (c & 0xF000) output |= (((c & 0xF000) << (32 - 16)) | 0x0F000000); - return output; - } - case LTDC_FMT_L8: { - return ((c & 0xFF) | 0xFF000000); - } - case LTDC_FMT_AL44: { - register ltdc_color_t output = 0x00000000; - if (c & 0x0F) output |= (((c & 0x0F) << ( 8 - 4)) | 0x0000000F); - if (c & 0xF0) output |= (((c & 0xF0) << (32 - 8)) | 0x0F000000); - return output; - } - case LTDC_FMT_AL88: { - return (((c & 0x00FF) << ( 8 - 8)) | - ((c & 0xFF00) << (32 - 16))); - } - default: - osalDbgAssert(false, "invalid format"); - return 0; - } -} - -#endif /* LTDC_USE_SOFTWARE_CONVERSIONS */ - -/** @} */ - -/** @} */ - -#endif /* STM32_LTDC_USE_LTDC */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h deleted file mode 100644 index 16b38ca..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h +++ /dev/null @@ -1,736 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file stm32_ltdc.h - * @brief LCD-TFT Controller Driver. - * - * @addtogroup ltdc - * @{ - */ - -#ifndef _STM32_LTDC_H_ -#define _STM32_LTDC_H_ - -/** - * @brief Using the LTDC driver. - */ -#if !defined(STM32_LTDC_USE_LTDC) || defined(__DOXYGEN__) -#define STM32_LTDC_USE_LTDC (FALSE) -#endif - -#if (TRUE == STM32_LTDC_USE_LTDC) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name LTDC enable flags - * @{ - */ -#define LTDC_EF_ENABLE (1 << 0) /**< LTDC enabled.*/ -#define LTDC_EF_DITHER (1 << 16) /**< Dithering enabled.*/ -#define LTDC_EF_PIXCLK_INVERT (1 << 28) /**< Inverted pixel clock.*/ -#define LTDC_EF_DATAEN_HIGH (1 << 29) /**< Active-high data enable.*/ -#define LTDC_EF_VSYNC_HIGH (1 << 30) /**< Active-high vsync.*/ -#define LTDC_EF_HSYNC_HIGH (1 << 31) /**< Active-high hsync.*/ - -#define LTDC_EF_MASK \ - (LTDC_EF_ENABLE | LTDC_EF_DITHER | LTDC_EF_PIXCLK_INVERT | \ - LTDC_EF_DATAEN_HIGH | LTDC_EF_VSYNC_HIGH | LTDC_EF_HSYNC_HIGH) -/** @} */ - -/** - * @name LTDC layer enable flags - * @{ - */ -#define LTDC_LEF_ENABLE (1 << 0) /**< Layer enabled*/ -#define LTDC_LEF_KEYING (1 << 1) /**< Color keying enabled.*/ -#define LTDC_LEF_PALETTE (1 << 4) /**< Palette enabled.*/ - -#define LTDC_LEF_MASK \ - (LTDC_LEF_ENABLE | LTDC_LEF_KEYING | LTDC_LEF_PALETTE) -/** @} */ - -/** - * @name LTDC pixel formats - * @{ - */ -#define LTDC_FMT_ARGB8888 (0) /**< ARGB-8888 format.*/ -#define LTDC_FMT_RGB888 (1) /**< RGB-888 format.*/ -#define LTDC_FMT_RGB565 (2) /**< RGB-565 format.*/ -#define LTDC_FMT_ARGB1555 (3) /**< ARGB-1555 format.*/ -#define LTDC_FMT_ARGB4444 (4) /**< ARGB-4444 format.*/ -#define LTDC_FMT_L8 (5) /**< L-8 format.*/ -#define LTDC_FMT_AL44 (6) /**< AL-44 format.*/ -#define LTDC_FMT_AL88 (7) /**< AL-88 format.*/ -/** @} */ - -/** - * @name LTDC pixel format aliased raw masks - * @{ - */ -#define LTDC_XMASK_ARGB8888 (0xFFFFFFFF) /**< ARGB-8888 aliased mask.*/ -#define LTDC_XMASK_RGB888 (0x00FFFFFF) /**< RGB-888 aliased mask.*/ -#define LTDC_XMASK_RGB565 (0x00F8FCF8) /**< RGB-565 aliased mask.*/ -#define LTDC_XMASK_ARGB1555 (0x80F8F8F8) /**< ARGB-1555 aliased mask.*/ -#define LTDC_XMASK_ARGB4444 (0xF0F0F0F0) /**< ARGB-4444 aliased mask.*/ -#define LTDC_XMASK_L8 (0x000000FF) /**< L-8 aliased mask.*/ -#define LTDC_XMASK_AL44 (0xF00000F0) /**< AL-44 aliased mask.*/ -#define LTDC_XMASK_AL88 (0xFF0000FF) /**< AL-88 aliased mask.*/ -/** @} */ - -/** - * @name LTDC blending factors - * @{ - */ -#define LTDC_BLEND_FIX1_FIX2 (0x0405) /**< cnst1; 1 - cnst2 */ -#define LTDC_BLEND_FIX1_MOD2 (0x0407) /**< cnst1; 1 - a2 * cnst2 */ -#define LTDC_BLEND_MOD1_FIX2 (0x0605) /**< a1 * cnst1; 1 - cnst2 */ -#define LTDC_BLEND_MOD1_MOD2 (0x0607) /**< a1 * cnst1; 1 - a2 * cnst2 */ -/** @} */ - -/** - * @name LTDC parameter bounds - * @{ - */ - -#define LTDC_MIN_SCREEN_WIDTH (1) -#define LTDC_MIN_SCREEN_HEIGHT (1) -#define LTDC_MAX_SCREEN_WIDTH (800) -#define LTDC_MAX_SCREEN_HEIGHT (600) - -#define LTDC_MIN_HSYNC_WIDTH (1) -#define LTDC_MIN_VSYNC_HEIGHT (1) -#define LTDC_MAX_HSYNC_WIDTH (1 << 12) -#define LTDC_MAX_VSYNC_HEIGHT (1 << 11) - -#define LTDC_MIN_HBP_WIDTH (0) -#define LTDC_MIN_VBP_HEIGHT (0) -#define LTDC_MAX_HBP_WIDTH (1 << 12) -#define LTDC_MAX_VBP_HEIGHT (1 << 11) - -#define LTDC_MIN_ACC_HBP_WIDTH (1) -#define LTDC_MIN_ACC_VBP_HEIGHT (1) -#define LTDC_MAX_ACC_HBP_WIDTH (1 << 12) -#define LTDC_MAX_ACC_VBP_HEIGHT (1 << 11) - -#define LTDC_MIN_HFP_WIDTH (0) -#define LTDC_MIN_VFP_HEIGHT (0) -#define LTDC_MAX_HFP_WIDTH (1 << 12) -#define LTDC_MAX_VFP_HEIGHT (1 << 11) - -#define LTDC_MIN_ACTIVE_WIDTH (0) -#define LTDC_MIN_ACTIVE_HEIGHT (0) -#define LTDC_MAX_ACTIVE_WIDTH (1 << 12) -#define LTDC_MAX_ACTIVE_HEIGHT (1 << 11) - -#define LTDC_MIN_ACC_ACTIVE_WIDTH (1) -#define LTDC_MIN_ACC_ACTIVE_HEIGHT (1) -#define LTDC_MAX_ACC_ACTIVE_WIDTH (1 << 12) -#define LTDC_MAX_ACC_ACTIVE_HEIGHT (1 << 11) - -#define LTDC_MIN_ACC_TOTAL_WIDTH (1) -#define LTDC_MIN_ACC_TOTAL_HEIGHT (1) -#define LTDC_MAX_ACC_TOTAL_WIDTH (1 << 12) -#define LTDC_MAX_ACC_TOTAL_HEIGHT (1 << 11) - -#define LTDC_MIN_LINE_INTERRUPT_POS (0) -#define LTDC_MAX_LINE_INTERRUPT_POS ((1 << 11) - 1) - -#define LTDC_MIN_WINDOW_HSTART (0) -#define LTDC_MIN_WINDOW_HSTART (0) -#define LTDC_MAX_WINDOW_HSTOP ((1 << 12) - 1) -#define LTDC_MAX_WINDOW_HSTOP ((1 << 12) - 1) - -#define LTDC_MIN_WINDOW_VSTART (0) -#define LTDC_MIN_WINDOW_VSTART (0) -#define LTDC_MAX_WINDOW_VSTOP ((1 << 11) - 1) -#define LTDC_MAX_WINDOW_VSTOP ((1 << 11) - 1) - -#define LTDC_MIN_FRAME_WIDTH_BYTES (0) -#define LTDC_MIN_FRAME_HEIGHT_LINES (0) -#define LTDC_MIN_FRAME_PITCH_BYTES (0) -#define LTDC_MAX_FRAME_WIDTH_BYTES ((1 << 13) - 1 - 3) -#define LTDC_MAX_FRAME_HEIGHT_LINES ((1 << 11) - 1) -#define LTDC_MAX_FRAME_PITCH_BYTES ((1 << 13) - 1) - -#define LTDC_MIN_PIXFMT_ID (0) -#define LTDC_MAX_PIXFMT_ID (7) - -#define LTDC_MAX_PALETTE_LENGTH (256) - -/** @} */ - -/** - * @name LTDC basic ARGB-8888 colors. - * @{ - */ -/* Microsoft Windows default 16-color palette.*/ -#define LTDC_COLOR_BLACK (0xFF000000) -#define LTDC_COLOR_MAROON (0xFF800000) -#define LTDC_COLOR_GREEN (0xFF008000) -#define LTDC_COLOR_OLIVE (0xFF808000) -#define LTDC_COLOR_NAVY (0xFF000080) -#define LTDC_COLOR_PURPLE (0xFF800080) -#define LTDC_COLOR_TEAL (0xFF008080) -#define LTDC_COLOR_SILVER (0xFFC0C0C0) -#define LTDC_COLOR_GRAY (0xFF808080) -#define LTDC_COLOR_RED (0xFFFF0000) -#define LTDC_COLOR_LIME (0xFF00FF00) -#define LTDC_COLOR_YELLOW (0xFFFFFF00) -#define LTDC_COLOR_BLUE (0xFF0000FF) -#define LTDC_COLOR_FUCHSIA (0xFFFF00FF) -#define LTDC_COLOR_AQUA (0xFF00FFFF) -#define LTDC_COLOR_WHITE (0xFFFFFFFF) -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name LTDC configuration options - * @{ - */ - -/** - * @brief LTDC event interrupt priority level setting. - */ -#if !defined(STM32_LTDC_EV_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_LTDC_EV_IRQ_PRIORITY (11) -#endif - -/** - * @brief LTDC error interrupt priority level setting. - */ -#if !defined(STM32_LTDC_ER_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_LTDC_ER_IRQ_PRIORITY (11) -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(LTDC_USE_WAIT) || defined(__DOXYGEN__) -#define LTDC_USE_WAIT (TRUE) -#endif - -/** - * @brief Enables the @p ltdcAcquireBus() and @p ltdcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(LTDC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define LTDC_USE_MUTUAL_EXCLUSION (TRUE) -#endif - -/** - * @brief Provides software color conversion functions. - * @note Disabling this option saves both code and data space. - */ -#if !defined(LTDC_USE_SOFTWARE_CONVERSIONS) || defined(__DOXYGEN__) -#define LTDC_USE_SOFTWARE_CONVERSIONS (TRUE) -#endif - -/** - * @brief Enables checks for LTDC functions. - * @note Disabling this option saves both code and data space. - * @note Disabling checks by ChibiOS will automatically disable LTDC checks. - */ -#if !defined(LTDC_USE_CHECKS) || defined(__DOXYGEN__) -#define LTDC_USE_CHECKS (TRUE) -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if (TRUE != STM32_HAS_LTDC) -#error "LTDC must be present when using the LTDC subsystem" -#endif - -#if (TRUE == STM32_LTDC_USE_LTDC) && (TRUE != STM32_HAS_LTDC) -#error "LTDC not present in the selected device" -#endif - -#if (TRUE == LTDC_USE_MUTUAL_EXCLUSION) -#if (TRUE != CH_CFG_USE_MUTEXES) && (TRUE != CH_CFG_USE_SEMAPHORES) -#error "LTDC_USE_MUTUAL_EXCLUSION requires CH_CFG_USE_MUTEXES and/or CH_CFG_USE_SEMAPHORES" -#endif -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/* Complex types forwarding.*/ -typedef union ltdc_coloralias_t ltdc_coloralias_t; -typedef struct ltdc_window_t ltdc_window_t; -typedef struct ltdc_frame_t ltdc_frame_t; -typedef struct ltdc_laycfg_t ltdc_laycfg_t; -typedef struct LTDCConfig LTDCConfig; -typedef enum ltdc_state_t ltdc_state_t; -typedef struct LTDCDriver LTDCDriver; - -/** - * @name LTDC Data types - * @{ - */ - -/** - * @brief LTDC generic color. - */ -typedef uint32_t ltdc_color_t; - -/** - * @brief LTDC color aliases. - * @detail Mapped with ARGB-8888, except for luminance (L mapped onto B). - * Padding fields are prefixed with 'x', and should be clear - * (all 0) before compression and set (all 1) after expansion. - */ -typedef union ltdc_coloralias_t { - struct { - unsigned b : 8; - unsigned g : 8; - unsigned r : 8; - unsigned a : 8; - } argb8888; /**< Mapped ARGB-8888 bits.*/ - struct { - unsigned b : 8; - unsigned g : 8; - unsigned r : 8; - unsigned xa : 8; - } rgb888; /**< Mapped RGB-888 bits.*/ - struct { - unsigned xb : 3; - unsigned b : 5; - unsigned xg : 2; - unsigned g : 6; - unsigned xr : 3; - unsigned r : 5; - unsigned xa : 8; - } rgb565; /**< Mapped RGB-565 bits.*/ - struct { - unsigned xb : 3; - unsigned b : 5; - unsigned xg : 3; - unsigned g : 5; - unsigned xr : 3; - unsigned r : 5; - unsigned xa : 7; - unsigned a : 1; - } argb1555; /**< Mapped ARGB-1555 values.*/ - struct { - unsigned xb : 4; - unsigned b : 4; - unsigned xg : 4; - unsigned g : 4; - unsigned xr : 4; - unsigned r : 4; - unsigned xa : 4; - unsigned a : 4; - } argb4444; /**< Mapped ARGB-4444 values.*/ - struct { - unsigned l : 8; - unsigned x : 16; - unsigned xa : 8; - } l8; /**< Mapped L-8 bits.*/ - struct { - unsigned xl : 4; - unsigned l : 4; - unsigned x : 16; - unsigned xa : 4; - unsigned a : 4; - } al44; /**< Mapped AL-44 bits.*/ - struct { - unsigned l : 8; - unsigned x : 16; - unsigned a : 8; - } al88; /**< Mapped AL-88 bits.*/ - ltdc_color_t aliased; /**< Aliased raw bits.*/ -} ltdc_coloralias_t; - -/** - * @brief LTDC layer identifier. - */ -typedef uint32_t ltdc_layerid_t; - -/** - * @brief LTDC pixel format. - */ -typedef uint32_t ltdc_pixfmt_t; - -/** - * @brief LTDC blending factor. - */ -typedef uint32_t ltdc_blendf_t; - -/** - * @brief LTDC ISR callback. - */ -typedef void (*ltdc_isrcb_t)(LTDCDriver *ltdcp); - -/** - * @brief LTDC window specifications. - */ -typedef struct ltdc_window_t { - uint16_t hstart; /**< Horizontal start pixel (left).*/ - uint16_t hstop; /**< Horizontal stop pixel (right).*/ - uint16_t vstart; /**< Vertical start pixel (top).*/ - uint16_t vstop; /**< Vertical stop pixel (bottom).*/ -} ltdc_window_t; - -/** - * @brief LTDC frame specifications. - */ -typedef struct ltdc_frame_t { - void *bufferp; /**< Frame buffer address.*/ - uint16_t width; /**< Frame width, in pixels.*/ - uint16_t height; /**< Frame height, in pixels.*/ - size_t pitch; /**< Line pitch, in bytes.*/ - ltdc_pixfmt_t fmt; /**< Pixel format.*/ -} ltdc_frame_t; - -/** - * @brief LTDC configuration flags. - */ -typedef uint8_t ltdc_flags_t; - -/** - * @brief LTDC startup layer configuration. - */ -typedef struct ltdc_laycfg_t { - const ltdc_frame_t *frame; /**< Frame buffer specifications.*/ - const ltdc_window_t *window; /**< Window specifications.*/ - ltdc_color_t def_color; /**< Default color, ARGB-8888.*/ - uint8_t const_alpha; /**< Constant alpha factor.*/ - ltdc_color_t key_color; /**< Color key.*/ - const ltdc_color_t *pal_colors; /**< Palette colors, or @p NULL.*/ - uint16_t pal_length; /**< Palette length, or @p 0.*/ - ltdc_blendf_t blending; /**< Blending factors.*/ - ltdc_flags_t flags; /**< Layer configuration flags.*/ -} ltdc_laycfg_t; - -/** - * @brief LTDC driver configuration. - */ -typedef struct LTDCConfig { - /* Display specifications.*/ - uint16_t screen_width; /**< Screen pixel width.*/ - uint16_t screen_height; /**< Screen pixel height.*/ - uint16_t hsync_width; /**< Horizontal sync pixel width.*/ - uint16_t vsync_height; /**< Vertical sync pixel height.*/ - uint16_t hbp_width; /**< Horizontal back porch pixel width.*/ - uint16_t vbp_height; /**< Vertical back porch pixel height.*/ - uint16_t hfp_width; /**< Horizontal front porch pixel width.*/ - uint16_t vfp_height; /**< Vertical front porch pixel height.*/ - ltdc_flags_t flags; /**< Driver configuration flags.*/ - - /* ISR callbacks.*/ - ltdc_isrcb_t line_isr; /**< Line Interrupt ISR, or @p NULL.*/ - ltdc_isrcb_t rr_isr; /**< Register Reload ISR, or @p NULL.*/ - ltdc_isrcb_t fuerr_isr; /**< FIFO Underrun ISR, or @p NULL.*/ - ltdc_isrcb_t terr_isr; /**< Transfer Error ISR, or @p NULL.*/ - - /* Layer and color settings.*/ - ltdc_color_t clear_color; /**< Clear screen color, RGB-888.*/ - const ltdc_laycfg_t *bg_laycfg; /**< Background layer specs, or @p NULL.*/ - const ltdc_laycfg_t *fg_laycfg; /**< Foreground layer specs, or @p NULL.*/ -} LTDCConfig; - -/** - * @brief LTDC driver state. - */ -typedef enum ltdc_state_t { - LTDC_UNINIT = (0), /**< Not initialized.*/ - LTDC_STOP = (1), /**< Stopped.*/ - LTDC_READY = (2), /**< Ready.*/ - LTDC_ACTIVE = (3), /**< Executing commands.*/ -} ltdc_state_t; - -/** - * @brief LTDC driver. - */ -typedef struct LTDCDriver { - ltdc_state_t state; /**< Driver state.*/ - const LTDCConfig *config; /**< Driver configuration.*/ - - /* Handy computations.*/ - ltdc_window_t active_window; /**< Active window coordinates.*/ - - /* Multithreading stuff.*/ -#if (TRUE == LTDC_USE_WAIT) || defined(__DOXYGEN__) - thread_t *thread; /**< Waiting thread.*/ -#endif /* LTDC_USE_WAIT */ -#if (TRUE == LTDC_USE_MUTUAL_EXCLUSION) -#if (TRUE == CH_CFG_USE_MUTEXES) - mutex_t lock; /**< Multithreading lock.*/ -#elif (TRUE == CH_CFG_USE_SEMAPHORES) - semaphore_t lock; /**< Multithreading lock.*/ -#endif -#endif /* LTDC_USE_MUTUAL_EXCLUSION */ -} LTDCDriver; - -/** @} */ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Makes an ARGB-8888 value from byte components. - * - * @param[in] a alpha byte component - * @param[in] r red byte component - * @param[in] g green byte component - * @param[in] b blue byte component - * - * @return color in ARGB-8888 format - * - * @api - */ -#define ltdcMakeARGB8888(a, r, g, b) \ - ((((ltdc_color_t)(a) & 0xFF) << 24) | \ - (((ltdc_color_t)(r) & 0xFF) << 16) | \ - (((ltdc_color_t)(g) & 0xFF) << 8) | \ - (((ltdc_color_t)(b) & 0xFF) << 0)) - -/** - * @brief Compute bytes per pixel. - * @details Computes the bytes per pixel for the specified pixel format. - * Rounds to the ceiling. - * - * @param[in] fmt pixel format - * - * @return bytes per pixel - * - * @api - */ -#define ltdcBytesPerPixel(fmt) \ - ((ltdcBitsPerPixel(fmt) + 7) >> 3) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern LTDCDriver LTDCD1; - -#ifdef __cplusplus -extern "C" { -#endif - /* Driver methods.*/ - void ltdcInit(void); - void ltdcObjectInit(LTDCDriver *ltdcp); - ltdc_state_t ltdcGetStateI(LTDCDriver *ltdcp); - ltdc_state_t ltdcGetState(LTDCDriver *ltdcp); - void ltdcStart(LTDCDriver *ltdcp, const LTDCConfig *configp); - void ltdcStop(LTDCDriver *ltdcp); -#if (TRUE == LTDC_USE_MUTUAL_EXCLUSION) - void ltdcAcquireBusS(LTDCDriver *ltdcp); - void ltdcAcquireBus(LTDCDriver *ltdcp); - void ltdcReleaseBusS(LTDCDriver *ltdcp); - void ltdcReleaseBus(LTDCDriver *ltdcp); -#endif /* LTDC_USE_MUTUAL_EXCLUSION */ - - /* Global methods.*/ - ltdc_flags_t ltdcGetEnableFlagsI(LTDCDriver *ltdcp); - ltdc_flags_t ltdcGetEnableFlags(LTDCDriver *ltdcp); - void ltdcSetEnableFlagsI(LTDCDriver *ltdcp, ltdc_flags_t flags); - void ltdcSetEnableFlags(LTDCDriver *ltdcp, ltdc_flags_t flags); - bool ltdcIsReloadingI(LTDCDriver *ltdcp); - bool ltdcIsReloading(LTDCDriver *ltdcp); - void ltdcStartReloadI(LTDCDriver *ltdcp, bool immediately); - void ltdcStartReload(LTDCDriver *ltdcp, bool immediately); - void ltdcReloadS(LTDCDriver *ltdcp, bool immediately); - void ltdcReload(LTDCDriver *ltdcp, bool immediately); - bool ltdcIsDitheringEnabledI(LTDCDriver *ltdcp); - bool ltdcIsDitheringEnabled(LTDCDriver *ltdcp); - void ltdcEnableDitheringI(LTDCDriver *ltdcp); - void ltdcEnableDithering(LTDCDriver *ltdcp); - void ltdcDisableDitheringI(LTDCDriver *ltdcp); - void ltdcDisableDithering(LTDCDriver *ltdcp); - ltdc_color_t ltdcGetClearColorI(LTDCDriver *ltdcp); - ltdc_color_t ltdcGetClearColor(LTDCDriver *ltdcp); - void ltdcSetClearColorI(LTDCDriver *ltdcp, ltdc_color_t c); - void ltdcSetClearColor(LTDCDriver *ltdcp, ltdc_color_t c); - uint16_t ltdcGetLineInterruptPosI(LTDCDriver *ltdcp); - uint16_t ltdcGetLineInterruptPos(LTDCDriver *ltdcp); - void ltdcSetLineInterruptPosI(LTDCDriver *ltdcp, uint16_t line); - void ltdcSetLineInterruptPos(LTDCDriver *ltdcp, uint16_t line); - bool ltdcIsLineInterruptEnabledI(LTDCDriver *ltdcp); - bool ltdcIsLineInterruptEnabled(LTDCDriver *ltdcp); - void ltdcEnableLineInterruptI(LTDCDriver *ltdcp); - void ltdcEnableLineInterrupt(LTDCDriver *ltdcp); - void ltdcDisableLineInterruptI(LTDCDriver *ltdcp); - void ltdcDisableLineInterrupt(LTDCDriver *ltdcp); - void ltdcGetCurrentPosI(LTDCDriver *ltdcp, uint16_t *xp, uint16_t *yp); - void ltdcGetCurrentPos(LTDCDriver *ltdcp, uint16_t *xp, uint16_t *yp); - - /* Background layer methods.*/ - ltdc_flags_t ltdcBgGetEnableFlagsI(LTDCDriver *ltdcp); - ltdc_flags_t ltdcBgGetEnableFlags(LTDCDriver *ltdcp); - void ltdcBgSetEnableFlagsI(LTDCDriver *ltdcp, ltdc_flags_t flags); - void ltdcBgSetEnableFlags(LTDCDriver *ltdcp, ltdc_flags_t flags); - bool ltdcBgIsEnabledI(LTDCDriver *ltdcp); - bool ltdcBgIsEnabled(LTDCDriver *ltdcp); - void ltdcBgEnableI(LTDCDriver *ltdcp); - void ltdcBgEnable(LTDCDriver *ltdcp); - void ltdcBgDisableI(LTDCDriver *ltdcp); - void ltdcBgDisable(LTDCDriver *ltdcp); - bool ltdcBgIsPaletteEnabledI(LTDCDriver *ltdcp); - bool ltdcBgIsPaletteEnabled(LTDCDriver *ltdcp); - void ltdcBgEnablePaletteI(LTDCDriver *ltdcp); - void ltdcBgEnablePalette(LTDCDriver *ltdcp); - void ltdcBgDisablePaletteI(LTDCDriver *ltdcp); - void ltdcBgDisablePalette(LTDCDriver *ltdcp); - void ltdcBgSetPaletteColorI(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c); - void ltdcBgSetPaletteColor(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c); - void ltdcBgSetPaletteI(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length); - void ltdcBgSetPalette(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length); - ltdc_pixfmt_t ltdcBgGetPixelFormatI(LTDCDriver *ltdcp); - ltdc_pixfmt_t ltdcBgGetPixelFormat(LTDCDriver *ltdcp); - void ltdcBgSetPixelFormatI(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt); - void ltdcBgSetPixelFormat(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt); - bool ltdcBgIsKeyingEnabledI(LTDCDriver *ltdcp); - bool ltdcBgIsKeyingEnabled(LTDCDriver *ltdcp); - void ltdcBgEnableKeyingI(LTDCDriver *ltdcp); - void ltdcBgEnableKeying(LTDCDriver *ltdcp); - void ltdcBgDisableKeyingI(LTDCDriver *ltdcp); - void ltdcBgDisableKeying(LTDCDriver *ltdcp); - ltdc_color_t ltdcBgGetKeyingColorI(LTDCDriver *ltdcp); - ltdc_color_t ltdcBgGetKeyingColor(LTDCDriver *ltdcp); - void ltdcBgSetKeyingColorI(LTDCDriver *ltdcp, ltdc_color_t c); - void ltdcBgSetKeyingColor(LTDCDriver *ltdcp, ltdc_color_t c); - uint8_t ltdcBgGetConstantAlphaI(LTDCDriver *ltdcp); - uint8_t ltdcBgGetConstantAlpha(LTDCDriver *ltdcp); - void ltdcBgSetConstantAlphaI(LTDCDriver *ltdcp, uint8_t a); - void ltdcBgSetConstantAlpha(LTDCDriver *ltdcp, uint8_t a); - ltdc_color_t ltdcBgGetDefaultColorI(LTDCDriver *ltdcp); - ltdc_color_t ltdcBgGetDefaultColor(LTDCDriver *ltdcp); - void ltdcBgSetDefaultColorI(LTDCDriver *ltdcp, ltdc_color_t c); - void ltdcBgSetDefaultColor(LTDCDriver *ltdcp, ltdc_color_t c); - ltdc_blendf_t ltdcBgGetBlendingFactorsI(LTDCDriver *ltdcp); - ltdc_blendf_t ltdcBgGetBlendingFactors(LTDCDriver *ltdcp); - void ltdcBgSetBlendingFactorsI(LTDCDriver *ltdcp, ltdc_blendf_t bf); - void ltdcBgSetBlendingFactors(LTDCDriver *ltdcp, ltdc_blendf_t bf); - void ltdcBgGetWindowI(LTDCDriver *ltdcp, ltdc_window_t *windowp); - void ltdcBgGetWindow(LTDCDriver *ltdcp, ltdc_window_t *windowp); - void ltdcBgSetWindowI(LTDCDriver *ltdcp, const ltdc_window_t *windowp); - void ltdcBgSetWindow(LTDCDriver *ltdcp, const ltdc_window_t *windowp); - void ltdcBgSetInvalidWindowI(LTDCDriver *ltdcp); - void ltdcBgSetInvalidWindow(LTDCDriver *ltdcp); - void ltdcBgGetFrameI(LTDCDriver *ltdcp, ltdc_frame_t *framep); - void ltdcBgGetFrame(LTDCDriver *ltdcp, ltdc_frame_t *framep); - void ltdcBgSetFrameI(LTDCDriver *ltdcp, const ltdc_frame_t *framep); - void ltdcBgSetFrame(LTDCDriver *ltdcp, const ltdc_frame_t *framep); - void *ltdcBgGetFrameAddressI(LTDCDriver *ltdcp); - void *ltdcBgGetFrameAddress(LTDCDriver *ltdcp); - void ltdcBgSetFrameAddressI(LTDCDriver *ltdcp, void *bufferp); - void ltdcBgSetFrameAddress(LTDCDriver *ltdcp, void *bufferp); - void ltdcBgGetLayerI(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp); - void ltdcBgGetLayer(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp); - void ltdcBgSetConfigI(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp); - void ltdcBgSetConfig(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp); - - /* Foreground layer methods.*/ - ltdc_flags_t ltdcFgGetEnableFlagsI(LTDCDriver *ltdcp); - ltdc_flags_t ltdcFgGetEnableFlags(LTDCDriver *ltdcp); - void ltdcFgSetEnableFlagsI(LTDCDriver *ltdcp, ltdc_flags_t flags); - void ltdcFgSetEnableFlags(LTDCDriver *ltdcp, ltdc_flags_t flags); - bool ltdcFgIsEnabledI(LTDCDriver *ltdcp); - bool ltdcFgIsEnabled(LTDCDriver *ltdcp); - void ltdcFgEnableI(LTDCDriver *ltdcp); - void ltdcFgEnable(LTDCDriver *ltdcp); - void ltdcFgDisableI(LTDCDriver *ltdcp); - void ltdcFgDisable(LTDCDriver *ltdcp); - bool ltdcFgIsPaletteEnabledI(LTDCDriver *ltdcp); - bool ltdcFgIsPaletteEnabled(LTDCDriver *ltdcp); - void ltdcFgEnablePaletteI(LTDCDriver *ltdcp); - void ltdcFgEnablePalette(LTDCDriver *ltdcp); - void ltdcFgDisablePaletteI(LTDCDriver *ltdcp); - void ltdcFgDisablePalette(LTDCDriver *ltdcp); - void ltdcFgSetPaletteColorI(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c); - void ltdcFgSetPaletteColor(LTDCDriver *ltdcp, uint8_t slot, ltdc_color_t c); - void ltdcFgSetPaletteI(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length); - void ltdcFgSetPalette(LTDCDriver *ltdcp, const ltdc_color_t colors[], - uint16_t length); - ltdc_pixfmt_t ltdcFgGetPixelFormatI(LTDCDriver *ltdcp); - ltdc_pixfmt_t ltdcFgGetPixelFormat(LTDCDriver *ltdcp); - void ltdcFgSetPixelFormatI(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt); - void ltdcFgSetPixelFormat(LTDCDriver *ltdcp, ltdc_pixfmt_t fmt); - bool ltdcFgIsKeyingEnabledI(LTDCDriver *ltdcp); - bool ltdcFgIsKeyingEnabled(LTDCDriver *ltdcp); - void ltdcFgEnableKeyingI(LTDCDriver *ltdcp); - void ltdcFgEnableKeying(LTDCDriver *ltdcp); - void ltdcFgDisableKeyingI(LTDCDriver *ltdcp); - void ltdcFgDisableKeying(LTDCDriver *ltdcp); - ltdc_color_t ltdcFgGetKeyingColorI(LTDCDriver *ltdcp); - ltdc_color_t ltdcFgGetKeyingColor(LTDCDriver *ltdcp); - void ltdcFgSetKeyingColorI(LTDCDriver *ltdcp, ltdc_color_t c); - void ltdcFgSetKeyingColor(LTDCDriver *ltdcp, ltdc_color_t c); - uint8_t ltdcFgGetConstantAlphaI(LTDCDriver *ltdcp); - uint8_t ltdcFgGetConstantAlpha(LTDCDriver *ltdcp); - void ltdcFgSetConstantAlphaI(LTDCDriver *ltdcp, uint8_t a); - void ltdcFgSetConstantAlpha(LTDCDriver *ltdcp, uint8_t a); - ltdc_color_t ltdcFgGetDefaultColorI(LTDCDriver *ltdcp); - ltdc_color_t ltdcFgGetDefaultColor(LTDCDriver *ltdcp); - void ltdcFgSetDefaultColorI(LTDCDriver *ltdcp, ltdc_color_t c); - void ltdcFgSetDefaultColor(LTDCDriver *ltdcp, ltdc_color_t c); - ltdc_blendf_t ltdcFgGetBlendingFactorsI(LTDCDriver *ltdcp); - ltdc_blendf_t ltdcFgGetBlendingFactors(LTDCDriver *ltdcp); - void ltdcFgSetBlendingFactorsI(LTDCDriver *ltdcp, ltdc_blendf_t bf); - void ltdcFgSetBlendingFactors(LTDCDriver *ltdcp, ltdc_blendf_t bf); - void ltdcFgGetWindowI(LTDCDriver *ltdcp, ltdc_window_t *windowp); - void ltdcFgGetWindow(LTDCDriver *ltdcp, ltdc_window_t *windowp); - void ltdcFgSetWindowI(LTDCDriver *ltdcp, const ltdc_window_t *windowp); - void ltdcFgSetWindow(LTDCDriver *ltdcp, const ltdc_window_t *windowp); - void ltdcFgSetInvalidWindowI(LTDCDriver *ltdcp); - void ltdcFgSetInvalidWindow(LTDCDriver *ltdcp); - void ltdcFgGetFrameI(LTDCDriver *ltdcp, ltdc_frame_t *framep); - void ltdcFgGetFrame(LTDCDriver *ltdcp, ltdc_frame_t *framep); - void ltdcFgSetFrameI(LTDCDriver *ltdcp, const ltdc_frame_t *framep); - void ltdcFgSetFrame(LTDCDriver *ltdcp, const ltdc_frame_t *framep); - void *ltdcFgGetFrameAddressI(LTDCDriver *ltdcp); - void *ltdcFgGetFrameAddress(LTDCDriver *ltdcp); - void ltdcFgSetFrameAddressI(LTDCDriver *ltdcp, void *bufferp); - void ltdcFgSetFrameAddress(LTDCDriver *ltdcp, void *bufferp); - void ltdcFgGetLayerI(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp); - void ltdcFgGetLayer(LTDCDriver *ltdcp, ltdc_laycfg_t *cfgp); - void ltdcFgSetConfigI(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp); - void ltdcFgSetConfig(LTDCDriver *ltdcp, const ltdc_laycfg_t *cfgp); - - /* Helper functions.*/ - size_t ltdcBitsPerPixel(ltdc_pixfmt_t fmt); -#if (TRUE == LTDC_USE_SOFTWARE_CONVERSIONS) || defined(__DOXYGEN__) - ltdc_color_t ltdcFromARGB8888(ltdc_color_t c, ltdc_pixfmt_t fmt); - ltdc_color_t ltdcToARGB8888(ltdc_color_t c, ltdc_pixfmt_t fmt); -#endif /* LTDC_USE_SOFTWARE_CONVERSIONS */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32_LTDC_USE_LTDC */ - -#endif /* _STM32_LTDC_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c deleted file mode 100644 index c04278e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c +++ /dev/null @@ -1,1176 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Concepts and parts of this file have been contributed by Fabio Utzig and - Xo Wang. -*/ -/* - Rewritten by Emil Fresk (1/5 - 2014) for extended input capture - functionality. And fix for spurious callbacks in the interrupt handler. -*/ -/* - Improved by Uladzimir Pylinsky aka barthess (1/3 - 2015) for support of - 32-bit timers and timers with single capture/compare channels. -*/ - -/* - * Hardware Abstraction Layer for Extended Input Capture Unit - */ -#include "hal.h" - -#if (HAL_USE_EICU == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ -/** - * @brief Inverts the polarity for the given channel. - * - * @param[in] eicup Pointer to the EICUDriver object. - * @param[in] channel The timer channel to invert. - * - * @notapi - */ -#define eicu_lld_invert_polarity(eicup, channel) \ - (eicup)->tim->CCER ^= ((uint16_t)(STM32_TIM_CCER_CC1P << ((channel) * 4))) - -/** - * @brief Returns the compare value of the latest cycle. - * - * @param[in] chp Pointer to channel structure that fired the interrupt. - * @return The number of ticks. - * - * @notapi - */ -#define eicu_lld_get_compare(chp) (*((chp)->ccrp) + 1) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief EICUD1 driver identifier. - * @note The driver EICUD1 allocates the complex timer TIM1 when enabled. - */ -#if STM32_EICU_USE_TIM1 && !defined(__DOXYGEN__) -EICUDriver EICUD1; -#endif - -/** - * @brief EICUD2 driver identifier. - * @note The driver EICUD2 allocates the timer TIM2 when enabled. - */ -#if STM32_EICU_USE_TIM2 && !defined(__DOXYGEN__) -EICUDriver EICUD2; -#endif - -/** - * @brief EICUD3 driver identifier. - * @note The driver EICUD3 allocates the timer TIM3 when enabled. - */ -#if STM32_EICU_USE_TIM3 && !defined(__DOXYGEN__) -EICUDriver EICUD3; -#endif - -/** - * @brief EICUD4 driver identifier. - * @note The driver EICUD4 allocates the timer TIM4 when enabled. - */ -#if STM32_EICU_USE_TIM4 && !defined(__DOXYGEN__) -EICUDriver EICUD4; -#endif - -/** - * @brief EICUD5 driver identifier. - * @note The driver EICUD5 allocates the timer TIM5 when enabled. - */ -#if STM32_EICU_USE_TIM5 && !defined(__DOXYGEN__) -EICUDriver EICUD5; -#endif - -/** - * @brief EICUD8 driver identifier. - * @note The driver EICUD8 allocates the timer TIM8 when enabled. - */ -#if STM32_EICU_USE_TIM8 && !defined(__DOXYGEN__) -EICUDriver EICUD8; -#endif - -/** - * @brief EICUD9 driver identifier. - * @note The driver EICUD9 allocates the timer TIM9 when enabled. - */ -#if STM32_EICU_USE_TIM9 && !defined(__DOXYGEN__) -EICUDriver EICUD9; -#endif - -/** - * @brief EICUD12 driver identifier. - * @note The driver EICUD12 allocates the timer TIM12 when enabled. - */ -#if STM32_EICU_USE_TIM12 && !defined(__DOXYGEN__) -EICUDriver EICUD12; -#endif - -/** - * @brief EICUD10 driver identifier. - * @note The driver EICUD10 allocates the timer TIM10 when enabled. - */ -#if STM32_EICU_USE_TIM10 && !defined(__DOXYGEN__) -EICUDriver EICUD10; -#endif - -/** - * @brief EICUD11 driver identifier. - * @note The driver EICUD11 allocates the timer TIM11 when enabled. - */ -#if STM32_EICU_USE_TIM11 && !defined(__DOXYGEN__) -EICUDriver EICUD11; -#endif - -/** - * @brief EICUD13 driver identifier. - * @note The driver EICUD13 allocates the timer TIM13 when enabled. - */ -#if STM32_EICU_USE_TIM13 && !defined(__DOXYGEN__) -EICUDriver EICUD13; -#endif - -/** - * @brief EICUD14 driver identifier. - * @note The driver EICUD14 allocates the timer TIM14 when enabled. - */ -#if STM32_EICU_USE_TIM14 && !defined(__DOXYGEN__) -EICUDriver EICUD14; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ -/** - * @brief Returns both pulse width and period. - * @details The time is defined as number of ticks. - * - * @param[in] eicup Pointer to the EICUDriver object. - * @param[in] channel The timer channel that fired the interrupt. - * @param[in] compare Content of the CCR register. - * @return The number of ticks. - * - * @notapi - */ -static eicuresult_t get_time_both(const EICUDriver *eicup, - eicuchannel_t channel, - eicucnt_t compare) { - - const EICUChannel *chp = &eicup->channel[channel]; - eicuresult_t ret; - - /* Note! there is no overflow check because it handles under the hood of - unsigned subtraction math.*/ - - /* 16-bit timer */ - if (EICU_WIDTH_16 == eicup->width) { - uint16_t cmp = compare; - uint16_t la = chp->last_active; - uint16_t li = chp->last_idle; - uint16_t w = li - la; - uint16_t p = cmp - la; - ret.width = w; - ret.period = p; - } - /* 32-bit timer */ - else if (EICU_WIDTH_32 == eicup->width) { - ret.width = chp->last_idle - chp->last_active; - ret.period = compare - chp->last_active; - } - /* error trap */ - else { - osalSysHalt("Unhandled width value"); - } - - return ret; -} - -/** - * @brief Returns pulse width. - * @details The time is defined as number of ticks. - * - * @param[in] eicup Pointer to the EICUDriver object. - * @param[in] channel The timer channel that fired the interrupt. - * @param[in] compare Content of the CCR register. - * @return The number of ticks. - * - * @notapi - */ -static eicucnt_t get_time_width(const EICUDriver *eicup, - eicuchannel_t channel, - eicucnt_t compare) { - - const EICUChannel *chp = &eicup->channel[channel]; - - /* Note! there is no overflow check because it handles under the hood of - unsigned subtraction math.*/ - - /* 16-bit timer */ - if (EICU_WIDTH_16 == eicup->width) { - uint16_t cmp = compare; - uint16_t la = chp->last_active; - uint16_t ret = cmp - la; - return ret; - } - /* 32-bit timer */ - else if (EICU_WIDTH_32 == eicup->width) { - return compare - chp->last_active; - } - /* error trap */ - else { - osalSysHalt("Unhandled width value"); - return 0; - } -} - -/** - * @brief Returns pulse period. - * @details The time is defined as number of ticks. - * - * @param[in] eicup Pointer to the EICUDriver object. - * @param[in] channel The timer channel that fired the interrupt. - * @param[in] compare Content of the CCR register. - * @return The number of ticks. - * - * @notapi - */ -static eicucnt_t get_time_period(const EICUDriver *eicup, - eicuchannel_t channel, - eicucnt_t compare) { - - const EICUChannel *chp = &eicup->channel[channel]; - - /* Note! there is no overflow check because it handles under the hood of - unsigned subtraction math.*/ - - /* 16-bit timer */ - if (EICU_WIDTH_16 == eicup->width) { - uint16_t cmp = compare; - uint16_t li = chp->last_idle; - uint16_t ret = cmp - li; - return ret; - } - /* 32-bit timer */ - else if (EICU_WIDTH_32 == eicup->width) { - return compare - chp->last_idle; - } - /* error trap */ - else { - osalSysHalt("Unhandled width value"); - return 0; - } -} - -/** - * @brief EICU width or (width + period) event. - * @note Needs special care since it needs to invert the - * correct polarity bit to detect pulses. - * @note Assumes that the polarity is not changed by some - * external user. It must only be changed using the HAL. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * @param[in] channel The timer channel that fired the interrupt. - * - * @notapi - */ -static void isr_invoke_pulse_cb(EICUDriver *eicup, eicuchannel_t channel) { - EICUChannel *chp = &eicup->channel[channel]; - eicucnt_t compare = eicu_lld_get_compare(chp); - - if (EICU_CH_ACTIVE == chp->state) { - chp->state = EICU_CH_IDLE; - eicu_lld_invert_polarity(eicup, channel); - if (EICU_INPUT_PULSE == chp->config->mode) { - uint32_t width = get_time_width(eicup, channel, compare); - chp->config->capture_cb(eicup, channel, width, 0); - } - chp->last_idle = compare; - } - else { - chp->state = EICU_CH_ACTIVE; - eicu_lld_invert_polarity(eicup, channel); - if (EICU_INPUT_BOTH == chp->config->mode) { - eicuresult_t both = get_time_both(eicup, channel, compare); - chp->config->capture_cb(eicup, channel, both.width, both.period); - } - chp->last_active = compare; - } -} - -/** - * @brief EICU Edge detect event. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * @param[in] channel The timer channel that fired the interrupt. - * - * @notapi - */ -static void isr_invoke_edge_cb(EICUDriver *eicup, eicuchannel_t channel) { - EICUChannel *chp = &eicup->channel[channel]; - eicucnt_t compare = eicu_lld_get_compare(chp); - uint32_t period = get_time_period(eicup, channel, compare); - - chp->config->capture_cb(eicup, channel, 0, period); - chp->last_idle = compare; -} - -/** - * @brief Common EICU detect call. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * @param[in] channel The timer channel that fired the interrupt. - * - * @notapi - */ -static void eicu_isr_invoke_cb(EICUDriver *eicup, eicuchannel_t channel) { - - if (EICU_INPUT_EDGE == eicup->channel[channel].config->mode) - isr_invoke_edge_cb(eicup, channel); - else /* EICU_INPUT_PULSE || EICU_INPUT_BOTH */ - isr_invoke_pulse_cb(eicup, channel); -} - -/** - * @brief Shared IRQ handler. - * - * @param[in] eicup Pointer to the @p EICUDriver object - */ -static void eicu_lld_serve_interrupt(EICUDriver *eicup) { - uint16_t sr; - sr = eicup->tim->SR; - - /* Pick out the interrupts we are interested in by using - the interrupt enable bits as mask */ - sr &= (eicup->tim->DIER & STM32_TIM_DIER_IRQ_MASK); - - /* Clear interrupts */ - eicup->tim->SR = ~sr; - - if ((sr & STM32_TIM_SR_CC1IF) != 0) - eicu_isr_invoke_cb(eicup, EICU_CHANNEL_1); - if ((sr & STM32_TIM_SR_CC2IF) != 0) - eicu_isr_invoke_cb(eicup, EICU_CHANNEL_2); - if ((sr & STM32_TIM_SR_CC3IF) != 0) - eicu_isr_invoke_cb(eicup, EICU_CHANNEL_3); - if ((sr & STM32_TIM_SR_CC4IF) != 0) - eicu_isr_invoke_cb(eicup, EICU_CHANNEL_4); -} - -/** - * @brief Starts every channel. - * - * @param[in] eicup Pointer to the @p EICUDriver object - */ -static void start_channels(EICUDriver *eicup) { - - /* Set each input channel that is used as: a normal input capture channel, - link the corresponding CCR register and set polarity. */ - - /* Input capture channel 1 */ - if (eicup->config->iccfgp[0] != NULL) { - /* Normal capture input input */ - eicup->tim->CCMR1 |= STM32_TIM_CCMR1_CC1S(1); - - /* Link CCR register */ - eicup->channel[0].ccrp = &eicup->tim->CCR[0]; - - /* Set input polarity */ - if (eicup->config->iccfgp[0]->alvl == EICU_INPUT_ACTIVE_HIGH) - eicup->tim->CCER |= STM32_TIM_CCER_CC1E; - else - eicup->tim->CCER |= STM32_TIM_CCER_CC1E | STM32_TIM_CCER_CC1P; - } - - /* Input capture channel 2 */ - if (eicup->config->iccfgp[1] != NULL) { - /* Normal capture input input */ - eicup->tim->CCMR1 |= STM32_TIM_CCMR1_CC2S(1); - - /* Link CCR register */ - eicup->channel[1].ccrp = &eicup->tim->CCR[1]; - - /* Set input polarity */ - if (eicup->config->iccfgp[1]->alvl == EICU_INPUT_ACTIVE_HIGH) - eicup->tim->CCER |= STM32_TIM_CCER_CC2E; - else - eicup->tim->CCER |= STM32_TIM_CCER_CC2E | STM32_TIM_CCER_CC2P; - } - - /* Input capture channel 3 (not for TIM 9 and 12) */ - if (eicup->config->iccfgp[2] != NULL) { - /* Normal capture input input */ - eicup->tim->CCMR2 |= STM32_TIM_CCMR2_CC3S(1); - - /* Link CCR register */ - eicup->channel[2].ccrp = &eicup->tim->CCR[2]; - - /* Set input polarity */ - if (eicup->config->iccfgp[2]->alvl == EICU_INPUT_ACTIVE_HIGH) - eicup->tim->CCER |= STM32_TIM_CCER_CC3E; - else - eicup->tim->CCER |= STM32_TIM_CCER_CC3E | STM32_TIM_CCER_CC3P; - } - - /* Input capture channel 4 (not for TIM 9 and 12) */ - if (eicup->config->iccfgp[3] != NULL) { - /* Normal capture input input */ - eicup->tim->CCMR2 |= STM32_TIM_CCMR2_CC4S(1); - - /* Link CCR register */ - eicup->channel[3].ccrp = &eicup->tim->CCR[3]; - - /* Set input polarity */ - if (eicup->config->iccfgp[3]->alvl == EICU_INPUT_ACTIVE_HIGH) - eicup->tim->CCER |= STM32_TIM_CCER_CC4E; - else - eicup->tim->CCER |= STM32_TIM_CCER_CC4E | STM32_TIM_CCER_CC4P; - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if STM32_EICU_USE_TIM1 -#if !defined(STM32_TIM1_UP_HANDLER) -#error "STM32_TIM1_UP_HANDLER not defined" -#endif -/** - * @brief TIM1 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD1); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(STM32_TIM1_CC_HANDLER) -#error "STM32_TIM1_CC_HANDLER not defined" -#endif -/** - * @brief TIM1 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD1); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM1 */ - -#if STM32_EICU_USE_TIM2 - -#if !defined(STM32_TIM2_HANDLER) -#error "STM32_TIM2_HANDLER not defined" -#endif -/** - * @brief TIM2 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM2_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD2); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM2 */ - -#if STM32_EICU_USE_TIM3 -#if !defined(STM32_TIM3_HANDLER) -#error "STM32_TIM3_HANDLER not defined" -#endif -/** - * @brief TIM3 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM3_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD3); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM3 */ - -#if STM32_EICU_USE_TIM4 -#if !defined(STM32_TIM4_HANDLER) -#error "STM32_TIM4_HANDLER not defined" -#endif -/** - * @brief TIM4 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM4_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD4); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM4 */ - -#if STM32_EICU_USE_TIM5 -#if !defined(STM32_TIM5_HANDLER) -#error "STM32_TIM5_HANDLER not defined" -#endif -/** - * @brief TIM5 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM5_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD5); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM5 */ - -#if STM32_EICU_USE_TIM8 -#if !defined(STM32_TIM8_UP_HANDLER) -#error "STM32_TIM8_UP_HANDLER not defined" -#endif -/** - * @brief TIM8 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD8); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(STM32_TIM8_CC_HANDLER) -#error "STM32_TIM8_CC_HANDLER not defined" -#endif -/** - * @brief TIM8 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD8); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM8 */ - -#if STM32_EICU_USE_TIM9 -#if !defined(STM32_TIM9_HANDLER) -#error "STM32_TIM9_HANDLER not defined" -#endif -/** - * @brief TIM9 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM9_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD9); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM9 */ - -#if STM32_EICU_USE_TIM12 -#if !defined(STM32_TIM12_HANDLER) -#error "STM32_TIM12_HANDLER not defined" -#endif -/** - * @brief TIM12 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM12_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD12); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM12 */ - -#if STM32_EICU_USE_TIM10 -#if !defined(STM32_TIM10_HANDLER) -#error "STM32_TIM10_HANDLER not defined" -#endif -/** - * @brief TIM10 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM10_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD10); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM10 */ - -#if STM32_EICU_USE_TIM11 -#if !defined(STM32_TIM11_HANDLER) -#error "STM32_TIM11_HANDLER not defined" -#endif -/** - * @brief TIM11 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM11_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD11); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM11 */ - -#if STM32_EICU_USE_TIM13 -#if !defined(STM32_TIM13_HANDLER) -#error "STM32_TIM13_HANDLER not defined" -#endif -/** - * @brief TIM13 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM13_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD13); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM13 */ - -#if STM32_EICU_USE_TIM14 -#if !defined(STM32_TIM14_HANDLER) -#error "STM32_TIM14_HANDLER not defined" -#endif -/** - * @brief TIM14 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(STM32_TIM14_HANDLER) { - - OSAL_IRQ_PROLOGUE(); - - eicu_lld_serve_interrupt(&EICUD14); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* STM32_EICU_USE_TIM14 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level EICU driver initialization. - * - * @notapi - */ -void eicu_lld_init(void) { -#if STM32_EICU_USE_TIM1 - /* Driver initialization.*/ - eicuObjectInit(&EICUD1); - EICUD1.tim = STM32_TIM1; -#endif - -#if STM32_EICU_USE_TIM2 - /* Driver initialization.*/ - eicuObjectInit(&EICUD2); - EICUD2.tim = STM32_TIM2; -#endif - -#if STM32_EICU_USE_TIM3 - /* Driver initialization.*/ - eicuObjectInit(&EICUD3); - EICUD3.tim = STM32_TIM3; -#endif - -#if STM32_EICU_USE_TIM4 - /* Driver initialization.*/ - eicuObjectInit(&EICUD4); - EICUD4.tim = STM32_TIM4; -#endif - -#if STM32_EICU_USE_TIM5 - /* Driver initialization.*/ - eicuObjectInit(&EICUD5); - EICUD5.tim = STM32_TIM5; -#endif - -#if STM32_EICU_USE_TIM8 - /* Driver initialization.*/ - eicuObjectInit(&EICUD8); - EICUD8.tim = STM32_TIM8; -#endif - -#if STM32_EICU_USE_TIM9 - /* Driver initialization.*/ - eicuObjectInit(&EICUD9); - EICUD9.tim = STM32_TIM9; -#endif - -#if STM32_EICU_USE_TIM12 - /* Driver initialization.*/ - eicuObjectInit(&EICUD12); - EICUD12.tim = STM32_TIM12; -#endif - -#if STM32_EICU_USE_TIM10 - /* Driver initialization.*/ - eicuObjectInit(&EICUD10); - EICUD10.tim = STM32_TIM10; -#endif - -#if STM32_EICU_USE_TIM11 - /* Driver initialization.*/ - eicuObjectInit(&EICUD11); - EICUD11.tim = STM32_TIM11; -#endif - -#if STM32_EICU_USE_TIM13 - /* Driver initialization.*/ - eicuObjectInit(&EICUD13); - EICUD13.tim = STM32_TIM13; -#endif - -#if STM32_EICU_USE_TIM14 - /* Driver initialization.*/ - eicuObjectInit(&EICUD14); - EICUD14.tim = STM32_TIM14; -#endif -} - -/** - * @brief Configures and activates the EICU peripheral. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @notapi - */ -void eicu_lld_start(EICUDriver *eicup) { - uint32_t psc; - size_t ch; - - osalDbgAssert((eicup->config->iccfgp[0] != NULL) || - (eicup->config->iccfgp[1] != NULL) || - (eicup->config->iccfgp[2] != NULL) || - (eicup->config->iccfgp[3] != NULL), - "invalid input configuration"); - - if (eicup->state == EICU_STOP) { - /* Clock activation and timer reset.*/ -#if STM32_EICU_USE_TIM1 - if (&EICUD1 == eicup) { - rccEnableTIM1(FALSE); - rccResetTIM1(); - nvicEnableVector(STM32_TIM1_UP_NUMBER, STM32_EICU_TIM1_IRQ_PRIORITY); - nvicEnableVector(STM32_TIM1_CC_NUMBER, STM32_EICU_TIM1_IRQ_PRIORITY); - eicup->channels = 4; -#if defined(STM32_TIM1CLK) - eicup->clock = STM32_TIM1CLK; -#else - eicup->clock = STM32_TIMCLK2; -#endif - } -#endif -#if STM32_EICU_USE_TIM2 - if (&EICUD2 == eicup) { - rccEnableTIM2(FALSE); - rccResetTIM2(); - nvicEnableVector(STM32_TIM2_NUMBER, STM32_EICU_TIM2_IRQ_PRIORITY); - eicup->channels = 4; - eicup->clock = STM32_TIMCLK1; - } -#endif -#if STM32_EICU_USE_TIM3 - if (&EICUD3 == eicup) { - rccEnableTIM3(FALSE); - rccResetTIM3(); - nvicEnableVector(STM32_TIM3_NUMBER, STM32_EICU_TIM3_IRQ_PRIORITY); - eicup->channels = 4; - eicup->clock = STM32_TIMCLK1; - } -#endif -#if STM32_EICU_USE_TIM4 - if (&EICUD4 == eicup) { - rccEnableTIM4(FALSE); - rccResetTIM4(); - nvicEnableVector(STM32_TIM4_NUMBER, STM32_EICU_TIM4_IRQ_PRIORITY); - eicup->channels = 4; - eicup->clock = STM32_TIMCLK1; - } -#endif -#if STM32_EICU_USE_TIM5 - if (&EICUD5 == eicup) { - rccEnableTIM5(FALSE); - rccResetTIM5(); - nvicEnableVector(STM32_TIM5_NUMBER, STM32_EICU_TIM5_IRQ_PRIORITY); - eicup->channels = 4; - eicup->clock = STM32_TIMCLK1; - } -#endif -#if STM32_EICU_USE_TIM8 - if (&EICUD8 == eicup) { - rccEnableTIM8(FALSE); - rccResetTIM8(); - nvicEnableVector(STM32_TIM8_UP_NUMBER, STM32_EICU_TIM8_IRQ_PRIORITY); - nvicEnableVector(STM32_TIM8_CC_NUMBER, STM32_EICU_TIM8_IRQ_PRIORITY); - eicup->channels = 4; -#if defined(STM32_TIM8CLK) - eicup->clock = STM32_TIM8CLK; -#else - eicup->clock = STM32_TIMCLK2; -#endif - } -#endif -#if STM32_EICU_USE_TIM9 - if (&EICUD9 == eicup) { - rccEnableTIM9(FALSE); - rccResetTIM9(); - nvicEnableVector(STM32_TIM9_NUMBER, STM32_EICU_TIM9_IRQ_PRIORITY); - eicup->channels = 2; - eicup->clock = STM32_TIMCLK2; - } -#endif -#if STM32_EICU_USE_TIM12 - if (&EICUD12 == eicup) { - rccEnableTIM12(FALSE); - rccResetTIM12(); - nvicEnableVector(STM32_TIM12_NUMBER, STM32_EICU_TIM12_IRQ_PRIORITY); - eicup->channels = 2; - eicup->clock = STM32_TIMCLK1; - } -#endif -#if STM32_EICU_USE_TIM10 - if (&EICUD10 == eicup) { - rccEnableTIM10(FALSE); - rccResetTIM10(); - nvicEnableVector(STM32_TIM10_NUMBER, STM32_EICU_TIM10_IRQ_PRIORITY); - eicup->channels = 1; - eicup->clock = STM32_TIMCLK2; - } -#endif -#if STM32_EICU_USE_TIM11 - if (&EICUD11 == eicup) { - rccEnableTIM11(FALSE); - rccResetTIM11(); - nvicEnableVector(STM32_TIM11_NUMBER, STM32_EICU_TIM11_IRQ_PRIORITY); - eicup->channels = 1; - eicup->clock = STM32_TIMCLK2; - } -#endif -#if STM32_EICU_USE_TIM13 - if (&EICUD13 == eicup) { - rccEnableTIM13(FALSE); - rccResetTIM13(); - nvicEnableVector(STM32_TIM13_NUMBER, STM32_EICU_TIM13_IRQ_PRIORITY); - eicup->channels = 1; - eicup->clock = STM32_TIMCLK1; - } -#endif -#if STM32_EICU_USE_TIM14 - if (&EICUD14 == eicup) { - rccEnableTIM14(FALSE); - rccResetTIM14(); - nvicEnableVector(STM32_TIM14_NUMBER, STM32_EICU_TIM14_IRQ_PRIORITY); - eicup->channels = 1; - eicup->clock = STM32_TIMCLK1; - } -#endif - } - else { - /* Driver re-configuration scenario, it must be stopped first.*/ - eicup->tim->CR1 = 0; /* Timer disabled. */ - eicup->tim->DIER = eicup->config->dier &/* DMA-related DIER settings. */ - ~STM32_TIM_DIER_IRQ_MASK; - eicup->tim->SR = 0; /* Clear eventual pending IRQs. */ - eicup->tim->CCR[0] = 0; /* Comparator 1 disabled. */ - eicup->tim->CCR[1] = 0; /* Comparator 2 disabled. */ - eicup->tim->CNT = 0; /* Counter reset to zero. */ - } - - /* Timer configuration.*/ - psc = (eicup->clock / eicup->config->frequency) - 1; - chDbgAssert((psc <= 0xFFFF) && - ((psc + 1) * eicup->config->frequency) == eicup->clock, - "invalid frequency"); - eicup->tim->PSC = (uint16_t)psc; - eicup->tim->ARR = (eicucnt_t)-1; - - /* Detect width.*/ - if (0xFFFFFFFF == eicup->tim->ARR) - eicup->width = EICU_WIDTH_32; - else if (0xFFFF == eicup->tim->ARR) - eicup->width = EICU_WIDTH_16; - else - osalSysHalt("Unsupported width"); - - /* Reset registers */ - eicup->tim->SMCR = 0; - eicup->tim->CCMR1 = 0; - if (eicup->channels > 2) - eicup->tim->CCMR2 = 0; - - /* clean channel structures and set pointers to channel configs */ - for (ch=0; chchannel[ch].last_active = 0; - eicup->channel[ch].last_idle = 0; - eicup->channel[ch].config = eicup->config->iccfgp[ch]; - eicup->channel[ch].state = EICU_CH_IDLE; - } - - /* TIM9 and TIM12 have only 2 channels.*/ - if (eicup->channels == 2) { - osalDbgCheck((eicup->config->iccfgp[2] == NULL) && - (eicup->config->iccfgp[3] == NULL)); - } - - /* TIM10, TIM11, TIM13 and TIM14 have only 1 channel.*/ - if (eicup->channels == 1) { - osalDbgCheck((eicup->config->iccfgp[1] == NULL) && - (eicup->config->iccfgp[2] == NULL) && - (eicup->config->iccfgp[3] == NULL)); - } - - start_channels(eicup); -} - -/** - * @brief Deactivates the EICU peripheral. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @notapi - */ -void eicu_lld_stop(EICUDriver *eicup) { - - if (eicup->state == EICU_READY) { - - /* Clock deactivation.*/ - eicup->tim->CR1 = 0; /* Timer disabled. */ - eicup->tim->DIER = 0; /* All IRQs disabled. */ - eicup->tim->SR = 0; /* Clear eventual pending IRQs. */ - -#if STM32_EICU_USE_TIM1 - if (&EICUD1 == eicup) { - nvicDisableVector(STM32_TIM1_UP_NUMBER); - nvicDisableVector(STM32_TIM1_CC_NUMBER); - rccDisableTIM1(FALSE); - } -#endif -#if STM32_EICU_USE_TIM2 - if (&EICUD2 == eicup) { - nvicDisableVector(STM32_TIM2_NUMBER); - rccDisableTIM2(FALSE); - } -#endif -#if STM32_EICU_USE_TIM3 - if (&EICUD3 == eicup) { - nvicDisableVector(STM32_TIM3_NUMBER); - rccDisableTIM3(FALSE); - } -#endif -#if STM32_EICU_USE_TIM4 - if (&EICUD4 == eicup) { - nvicDisableVector(STM32_TIM4_NUMBER); - rccDisableTIM4(FALSE); - } -#endif -#if STM32_EICU_USE_TIM5 - if (&EICUD5 == eicup) { - nvicDisableVector(STM32_TIM5_NUMBER); - rccDisableTIM5(FALSE); - } -#endif -#if STM32_EICU_USE_TIM8 - if (&EICUD8 == eicup) { - nvicDisableVector(STM32_TIM8_UP_NUMBER); - nvicDisableVector(STM32_TIM8_CC_NUMBER); - rccDisableTIM8(FALSE); - } -#endif -#if STM32_EICU_USE_TIM9 - if (&EICUD9 == eicup) { - nvicDisableVector(STM32_TIM9_NUMBER); - rccDisableTIM9(FALSE); - } -#endif -#if STM32_EICU_USE_TIM12 - if (&EICUD12 == eicup) { - nvicDisableVector(STM32_TIM12_NUMBER); - rccDisableTIM12(FALSE); - } -#endif - } -#if STM32_EICU_USE_TIM10 - if (&EICUD10 == eicup) { - nvicDisableVector(STM32_TIM10_NUMBER); - rccDisableTIM10(FALSE); - } -#endif -#if STM32_EICU_USE_TIM11 - if (&EICUD11 == eicup) { - nvicDisableVector(STM32_TIM11_NUMBER); - rccDisableTIM11(FALSE); - } -#endif -#if STM32_EICU_USE_TIM13 - if (&EICUD13 == eicup) { - nvicDisableVector(STM32_TIM13_NUMBER); - rccDisableTIM13(FALSE); - } -#endif -#if STM32_EICU_USE_TIM14 - if (&EICUD14 == eicup) { - nvicDisableVector(STM32_TIM14_NUMBER); - rccDisableTIM14(FALSE); - } -#endif -} - -/** - * @brief Enables the EICU. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @notapi - */ -void eicu_lld_enable(EICUDriver *eicup) { - - eicup->tim->EGR = STM32_TIM_EGR_UG; - eicup->tim->SR = 0; /* Clear pending IRQs (if any). */ - - if ((eicup->config->iccfgp[EICU_CHANNEL_1] != NULL) && - (eicup->config->iccfgp[EICU_CHANNEL_1]->capture_cb != NULL)) - eicup->tim->DIER |= STM32_TIM_DIER_CC1IE; - if ((eicup->config->iccfgp[EICU_CHANNEL_2] != NULL) && - (eicup->config->iccfgp[EICU_CHANNEL_2]->capture_cb != NULL)) - eicup->tim->DIER |= STM32_TIM_DIER_CC2IE; - if ((eicup->config->iccfgp[EICU_CHANNEL_3] != NULL) && - (eicup->config->iccfgp[EICU_CHANNEL_3]->capture_cb != NULL)) - eicup->tim->DIER |= STM32_TIM_DIER_CC3IE; - if ((eicup->config->iccfgp[EICU_CHANNEL_4] != NULL) && - (eicup->config->iccfgp[EICU_CHANNEL_4]->capture_cb != NULL)) - eicup->tim->DIER |= STM32_TIM_DIER_CC4IE; - - eicup->tim->CR1 = STM32_TIM_CR1_URS | STM32_TIM_CR1_CEN; -} - -/** - * @brief Disables the EICU. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @notapi - */ -void eicu_lld_disable(EICUDriver *eicup) { - eicup->tim->CR1 = 0; /* Initially stopped. */ - eicup->tim->SR = 0; /* Clear pending IRQs (if any). */ - - /* All interrupts disabled.*/ - eicup->tim->DIER &= ~STM32_TIM_DIER_IRQ_MASK; -} - -#endif /* HAL_USE_EICU */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h deleted file mode 100644 index 927eb6f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h +++ /dev/null @@ -1,554 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Rewritten by Emil Fresk (1/5 - 2014) for extended input capture - functionality. And fix for spurious callbacks in the interrupt handler. -*/ -/* - Improved by Uladzimir Pylinsky aka barthess (1/3 - 2015) for support of - 32-bit timers and timers with single capture/compare channels. -*/ - -#ifndef __EICU_LLD_H -#define __EICU_LLD_H - -#include "stm32_tim.h" - -#if (HAL_USE_EICU == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief EICUD1 driver enable switch. - * @details If set to @p TRUE the support for EICUD1 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM1) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM1 FALSE -#endif - -/** - * @brief EICUD2 driver enable switch. - * @details If set to @p TRUE the support for EICUD2 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM2) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM2 FALSE -#endif - -/** - * @brief EICUD3 driver enable switch. - * @details If set to @p TRUE the support for EICUD3 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM3) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM3 FALSE -#endif - -/** - * @brief EICUD4 driver enable switch. - * @details If set to @p TRUE the support for EICUD4 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM4) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM4 FALSE -#endif - -/** - * @brief EICUD5 driver enable switch. - * @details If set to @p TRUE the support for EICUD5 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM5) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM5 FALSE -#endif - -/** - * @brief EICUD8 driver enable switch. - * @details If set to @p TRUE the support for EICUD8 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM8) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM8 FALSE -#endif - -/** - * @brief EICUD9 driver enable switch. - * @details If set to @p TRUE the support for EICUD9 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM9) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM9 FALSE -#endif - -/** - * @brief EICUD12 driver enable switch. - * @details If set to @p TRUE the support for EICUD12 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_EICU_USE_TIM12) || defined(__DOXYGEN__) -#define STM32_EICU_USE_TIM12 FALSE -#endif - -/** - * @brief EICUD1 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM1_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD2 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM2_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD3 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM3_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD4 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM4_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD5 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM5_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD8 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM8_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD9 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM9_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM9_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD12 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM12_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM12_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD10 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM10_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM10_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD11 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM11_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM11_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD13 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM13_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM13_IRQ_PRIORITY 7 -#endif - -/** - * @brief EICUD14 interrupt priority level setting. - */ -#if !defined(STM32_EICU_TIM14_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_EICU_TIM14_IRQ_PRIORITY 7 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if STM32_EICU_USE_TIM1 && !STM32_HAS_TIM1 -#error "TIM1 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM2 && !STM32_HAS_TIM2 -#error "TIM2 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM3 && !STM32_HAS_TIM3 -#error "TIM3 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM4 && !STM32_HAS_TIM4 -#error "TIM4 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM5 && !STM32_HAS_TIM5 -#error "TIM5 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM8 && !STM32_HAS_TIM8 -#error "TIM8 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM9 && !STM32_HAS_TIM9 -#error "TIM9 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM12 && !STM32_HAS_TIM12 -#error "TIM12 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM10 && !STM32_HAS_TIM10 -#error "TIM10 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM11 && !STM32_HAS_TIM11 -#error "TIM11 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM13 && !STM32_HAS_TIM13 -#error "TIM13 not present in the selected device" -#endif - -#if STM32_EICU_USE_TIM14 && !STM32_HAS_TIM14 -#error "TIM14 not present in the selected device" -#endif - -#if !STM32_EICU_USE_TIM1 && !STM32_EICU_USE_TIM2 && \ - !STM32_EICU_USE_TIM3 && !STM32_EICU_USE_TIM4 && \ - !STM32_EICU_USE_TIM5 && !STM32_EICU_USE_TIM8 && \ - !STM32_EICU_USE_TIM9 && !STM32_EICU_USE_TIM12 && \ - !STM32_EICU_USE_TIM10 && !STM32_EICU_USE_TIM11 && \ - !STM32_EICU_USE_TIM13 && !STM32_EICU_USE_TIM14 -#error "EICU driver activated but no TIM peripheral assigned" -#endif - -#if STM32_EICU_USE_TIM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM1" -#endif - -#if STM32_EICU_USE_TIM2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM2" -#endif - -#if STM32_EICU_USE_TIM3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM3" -#endif - -#if STM32_EICU_USE_TIM4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM4" -#endif - -#if STM32_EICU_USE_TIM5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM5" -#endif - -#if STM32_EICU_USE_TIM8 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM8_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM8" -#endif - -#if STM32_EICU_USE_TIM9 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM9_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM9" -#endif - -#if STM32_EICU_USE_TIM12 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM12_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM12" -#endif - -#if STM32_EICU_USE_TIM10 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM10_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM10" -#endif - -#if STM32_EICU_USE_TIM11 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM11_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM11" -#endif - -#if STM32_EICU_USE_TIM13 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM13_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM13" -#endif - -#if STM32_EICU_USE_TIM14 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_EICU_TIM14_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM14" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ -/** - * @brief Active level selector. - */ -typedef enum { - EICU_INPUT_ACTIVE_HIGH, /**< Trigger on rising edge. */ - EICU_INPUT_ACTIVE_LOW, /**< Trigger on falling edge. */ -} eicuactivelevel_t; - -/** - * @brief Input type selector. - */ -typedef enum { - /** - * @brief Measures time between consequent edges. - * @details Callback fires on every _active_ edge. - */ - EICU_INPUT_EDGE, - /** - * @brief Measures pulse width. - * @details Callback fires on _idle_ edge of pulse. - */ - EICU_INPUT_PULSE, - /** - * @brief Measures both period and width.. - * @details Callback fires on _active_ edge of pulse. - */ - EICU_INPUT_BOTH -} eicucapturemode_t; - -/** - * @brief Timer registers width in bits. - */ -typedef enum { - EICU_WIDTH_16, - EICU_WIDTH_32 -} eicutimerwidth_t; - -/** - * @brief EICU frequency type. - */ -typedef uint32_t eicufreq_t; - -/** - * @brief EICU counter type. - */ -typedef uint32_t eicucnt_t; - -/** - * @brief EICU captured width and (or) period. - */ -typedef struct { - /** - * @brief Pulse width. - */ - eicucnt_t width; - /** - * @brief Pulse period. - */ - eicucnt_t period; -} eicuresult_t; - -/** - * @brief EICU Capture Channel Config structure definition. - */ -typedef struct { - /** - * @brief Specifies the active level of the input signal. - */ - eicuactivelevel_t alvl; - /** - * @brief Specifies the channel capture mode. - */ - eicucapturemode_t mode; - /** - * @brief Capture event callback. Used for PWM width, pulse width and - * pulse period capture event. - */ - eicucallback_t capture_cb; -} EICUChannelConfig; - -/** - * @brief EICU Capture Channel structure definition. - */ -typedef struct { - /** - * @brief Channel state for the internal state machine. - */ - eicuchannelstate_t state; - /** - * @brief Cached value for pulse width calculation. - */ - eicucnt_t last_active; - /** - * @brief Cached value for period calculation. - */ - eicucnt_t last_idle; - /** - * @brief Pointer to Input Capture channel configuration. - */ - const EICUChannelConfig *config; - /** - * @brief CCR register pointer for faster access. - */ - volatile uint32_t *ccrp; -} EICUChannel; - -/** - * @brief EICU Config structure definition. - */ -typedef struct { - /** - * @brief Specifies the Timer clock in Hz. - */ - eicufreq_t frequency; - /** - * @brief Pointer to each Input Capture channel configuration. - * @note A NULL parameter indicates the channel as unused. - * @note In PWM mode, only Channel 1 OR Channel 2 may be used. - */ - const EICUChannelConfig *iccfgp[EICU_CHANNEL_ENUM_END]; - /** - * @brief TIM DIER register initialization data. - */ - uint32_t dier; -} EICUConfig; - -/** - * @brief EICU Driver structure definition - */ -struct EICUDriver { - /** - * @brief STM32 timer peripheral for Input Capture. - */ - stm32_tim_t *tim; - /** - * @brief Driver state for the internal state machine. - */ - eicustate_t state; - /** - * @brief Channels' data structures. - */ - EICUChannel channel[EICU_CHANNEL_ENUM_END]; - /** - * @brief Timer base clock. - */ - uint32_t clock; - /** - * @brief Number of available capture compare channels in timer. - */ - size_t channels; - /** - * @brief Timer registers width in bits. - */ - eicutimerwidth_t width; - /** - * @brief Pointer to configuration for the driver. - */ - const EICUConfig *config; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ -#if STM32_EICU_USE_TIM1 && !defined(__DOXYGEN__) -extern EICUDriver EICUD1; -#endif - -#if STM32_EICU_USE_TIM2 && !defined(__DOXYGEN__) -extern EICUDriver EICUD2; -#endif - -#if STM32_EICU_USE_TIM3 && !defined(__DOXYGEN__) -extern EICUDriver EICUD3; -#endif - -#if STM32_EICU_USE_TIM4 && !defined(__DOXYGEN__) -extern EICUDriver EICUD4; -#endif - -#if STM32_EICU_USE_TIM5 && !defined(__DOXYGEN__) -extern EICUDriver EICUD5; -#endif - -#if STM32_EICU_USE_TIM8 && !defined(__DOXYGEN__) -extern EICUDriver EICUD8; -#endif - -#if STM32_EICU_USE_TIM9 && !defined(__DOXYGEN__) -extern EICUDriver EICUD9; -#endif - -#if STM32_EICU_USE_TIM12 && !defined(__DOXYGEN__) -extern EICUDriver EICUD12; -#endif - -#if STM32_EICU_USE_TIM10 && !defined(__DOXYGEN__) -extern EICUDriver EICUD10; -#endif - -#if STM32_EICU_USE_TIM11 && !defined(__DOXYGEN__) -extern EICUDriver EICUD11; -#endif - -#if STM32_EICU_USE_TIM13 && !defined(__DOXYGEN__) -extern EICUDriver EICUD13; -#endif - -#if STM32_EICU_USE_TIM14 && !defined(__DOXYGEN__) -extern EICUDriver EICUD14; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void eicu_lld_init(void); - void eicu_lld_start(EICUDriver *eicup); - void eicu_lld_stop(EICUDriver *eicup); - void eicu_lld_enable(EICUDriver *eicup); - void eicu_lld_disable(EICUDriver *eicup); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EICU */ - -#endif /* __EICU_LLD_H */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c deleted file mode 100644 index ea051f7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Martino Migliavacca - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIMv1/hal_qei_lld.c - * @brief STM32 QEI subsystem low level driver header. - * - * @addtogroup QEI - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_QEI == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief QEID1 driver identifier. - * @note The driver QEID1 allocates the complex timer TIM1 when enabled. - */ -#if STM32_QEI_USE_TIM1 || defined(__DOXYGEN__) -QEIDriver QEID1; -#endif - -/** - * @brief QEID2 driver identifier. - * @note The driver QEID1 allocates the timer TIM2 when enabled. - */ -#if STM32_QEI_USE_TIM2 || defined(__DOXYGEN__) -QEIDriver QEID2; -#endif - -/** - * @brief QEID3 driver identifier. - * @note The driver QEID1 allocates the timer TIM3 when enabled. - */ -#if STM32_QEI_USE_TIM3 || defined(__DOXYGEN__) -QEIDriver QEID3; -#endif - -/** - * @brief QEID4 driver identifier. - * @note The driver QEID4 allocates the timer TIM4 when enabled. - */ -#if STM32_QEI_USE_TIM4 || defined(__DOXYGEN__) -QEIDriver QEID4; -#endif - -/** - * @brief QEID5 driver identifier. - * @note The driver QEID5 allocates the timer TIM5 when enabled. - */ -#if STM32_QEI_USE_TIM5 || defined(__DOXYGEN__) -QEIDriver QEID5; -#endif - -/** - * @brief QEID8 driver identifier. - * @note The driver QEID8 allocates the timer TIM8 when enabled. - */ -#if STM32_QEI_USE_TIM8 || defined(__DOXYGEN__) -QEIDriver QEID8; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level QEI driver initialization. - * - * @notapi - */ -void qei_lld_init(void) { - -#if STM32_QEI_USE_TIM1 - /* Driver initialization.*/ - qeiObjectInit(&QEID1); - QEID1.tim = STM32_TIM1; -#endif - -#if STM32_QEI_USE_TIM2 - /* Driver initialization.*/ - qeiObjectInit(&QEID2); - QEID2.tim = STM32_TIM2; -#endif - -#if STM32_QEI_USE_TIM3 - /* Driver initialization.*/ - qeiObjectInit(&QEID3); - QEID3.tim = STM32_TIM3; -#endif - -#if STM32_QEI_USE_TIM4 - /* Driver initialization.*/ - qeiObjectInit(&QEID4); - QEID4.tim = STM32_TIM4; -#endif - -#if STM32_QEI_USE_TIM5 - /* Driver initialization.*/ - qeiObjectInit(&QEID5); - QEID5.tim = STM32_TIM5; -#endif - -#if STM32_QEI_USE_TIM8 - /* Driver initialization.*/ - qeiObjectInit(&QEID8); - QEID8.tim = STM32_TIM8; -#endif -} - -/** - * @brief Configures and activates the QEI peripheral. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @notapi - */ -void qei_lld_start(QEIDriver *qeip) { - - if (qeip->state == QEI_STOP) { - /* Clock activation and timer reset.*/ -#if STM32_QEI_USE_TIM1 - if (&QEID1 == qeip) { - rccEnableTIM1(FALSE); - rccResetTIM1(); - } -#endif -#if STM32_QEI_USE_TIM2 - if (&QEID2 == qeip) { - rccEnableTIM2(FALSE); - rccResetTIM2(); - } -#endif -#if STM32_QEI_USE_TIM3 - if (&QEID3 == qeip) { - rccEnableTIM3(FALSE); - rccResetTIM3(); - } -#endif -#if STM32_QEI_USE_TIM4 - if (&QEID4 == qeip) { - rccEnableTIM4(FALSE); - rccResetTIM4(); - } -#endif - -#if STM32_QEI_USE_TIM5 - if (&QEID5 == qeip) { - rccEnableTIM5(FALSE); - rccResetTIM5(); - } -#endif -#if STM32_QEI_USE_TIM8 - if (&QEID8 == qeip) { - rccEnableTIM8(FALSE); - rccResetTIM8(); - } -#endif - } - /* Timer configuration.*/ - qeip->tim->CR1 = 0; /* Initially stopped. */ - qeip->tim->CR2 = 0; - qeip->tim->PSC = 0; - qeip->tim->DIER = 0; - qeip->tim->ARR = 0xFFFF; - - /* Set Capture Compare 1 and Capture Compare 2 as input. */ - qeip->tim->CCMR1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; - - if (qeip->config->mode == QEI_MODE_QUADRATURE) { - if (qeip->config->resolution == QEI_BOTH_EDGES) - qeip->tim->SMCR = TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0; - else - qeip->tim->SMCR = TIM_SMCR_SMS_0; - } else { - /* Direction/Clock mode. - * Direction input on TI1, Clock input on TI2. */ - qeip->tim->SMCR = TIM_SMCR_SMS_0; - } - - if (qeip->config->dirinv == QEI_DIRINV_TRUE) - qeip->tim->CCER = TIM_CCER_CC1E | TIM_CCER_CC1P | TIM_CCER_CC2E; - else - qeip->tim->CCER = TIM_CCER_CC1E | TIM_CCER_CC2E; -} - -/** - * @brief Deactivates the QEI peripheral. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @notapi - */ -void qei_lld_stop(QEIDriver *qeip) { - - if (qeip->state == QEI_READY) { - qeip->tim->CR1 = 0; /* Timer disabled. */ - - /* Clock deactivation.*/ -#if STM32_QEI_USE_TIM1 - if (&QEID1 == qeip) { - rccDisableTIM1(FALSE); - } -#endif -#if STM32_QEI_USE_TIM2 - if (&QEID2 == qeip) { - rccDisableTIM2(FALSE); - } -#endif -#if STM32_QEI_USE_TIM3 - if (&QEID3 == qeip) { - rccDisableTIM3(FALSE); - } -#endif -#if STM32_QEI_USE_TIM4 - if (&QEID4 == qeip) { - rccDisableTIM4(FALSE); - } -#endif -#if STM32_QEI_USE_TIM5 - if (&QEID5 == qeip) { - rccDisableTIM5(FALSE); - } -#endif - } -#if STM32_QEI_USE_TIM8 - if (&QEID8 == qeip) { - rccDisableTIM8(FALSE); - } -#endif -} - -/** - * @brief Enables the input capture. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @notapi - */ -void qei_lld_enable(QEIDriver *qeip) { - - qeip->tim->CR1 = TIM_CR1_CEN; /* Timer enabled. */ -} - -/** - * @brief Disables the input capture. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @notapi - */ -void qei_lld_disable(QEIDriver *qeip) { - - qeip->tim->CR1 = 0; /* Timer disabled. */ -} - -#endif /* HAL_USE_QEI */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h deleted file mode 100644 index d0cb683..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Martino Migliavacca - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIMv1/hal_qei_lld.h - * @brief STM32 QEI subsystem low level driver header. - * - * @addtogroup QEI - * @{ - */ - -#ifndef HAL_QEI_LLD_H -#define HAL_QEI_LLD_H - -#if (HAL_USE_QEI == TRUE) || defined(__DOXYGEN__) - -#include "stm32_tim.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief QEID1 driver enable switch. - * @details If set to @p TRUE the support for QEID1 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_QEI_USE_TIM1) || defined(__DOXYGEN__) -#define STM32_QEI_USE_TIM1 FALSE -#endif - -/** - * @brief QEID2 driver enable switch. - * @details If set to @p TRUE the support for QEID2 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_QEI_USE_TIM2) || defined(__DOXYGEN__) -#define STM32_QEI_USE_TIM2 FALSE -#endif - -/** - * @brief QEID3 driver enable switch. - * @details If set to @p TRUE the support for QEID3 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_QEI_USE_TIM3) || defined(__DOXYGEN__) -#define STM32_QEI_USE_TIM3 FALSE -#endif - -/** - * @brief QEID4 driver enable switch. - * @details If set to @p TRUE the support for QEID4 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_QEI_USE_TIM4) || defined(__DOXYGEN__) -#define STM32_QEI_USE_TIM4 FALSE -#endif - -/** - * @brief QEID5 driver enable switch. - * @details If set to @p TRUE the support for QEID5 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_QEI_USE_TIM5) || defined(__DOXYGEN__) -#define STM32_QEI_USE_TIM5 FALSE -#endif - -/** - * @brief QEID8 driver enable switch. - * @details If set to @p TRUE the support for QEID8 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_QEI_USE_TIM8) || defined(__DOXYGEN__) -#define STM32_QEI_USE_TIM8 FALSE -#endif - -/** - * @brief QEID1 interrupt priority level setting. - */ -#if !defined(STM32_QEI_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_QEI_TIM1_IRQ_PRIORITY 7 -#endif - -/** - * @brief QEID2 interrupt priority level setting. - */ -#if !defined(STM32_QEI_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_QEI_TIM2_IRQ_PRIORITY 7 -#endif - -/** - * @brief QEID3 interrupt priority level setting. - */ -#if !defined(STM32_QEI_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_QEI_TIM3_IRQ_PRIORITY 7 -#endif - -/** - * @brief QEID4 interrupt priority level setting. - */ -#if !defined(STM32_QEI_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_QEI_TIM4_IRQ_PRIORITY 7 -#endif - -/** - * @brief QEID5 interrupt priority level setting. - */ -#if !defined(STM32_QEI_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_QEI_TIM5_IRQ_PRIORITY 7 -#endif - -/** - * @brief QEID8 interrupt priority level setting. - */ -#if !defined(STM32_QEI_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_QEI_TIM8_IRQ_PRIORITY 7 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if STM32_QEI_USE_TIM1 && !STM32_HAS_TIM1 -#error "TIM1 not present in the selected device" -#endif - -#if STM32_QEI_USE_TIM2 && !STM32_HAS_TIM2 -#error "TIM2 not present in the selected device" -#endif - -#if STM32_QEI_USE_TIM3 && !STM32_HAS_TIM3 -#error "TIM3 not present in the selected device" -#endif - -#if STM32_QEI_USE_TIM4 && !STM32_HAS_TIM4 -#error "TIM4 not present in the selected device" -#endif - -#if STM32_QEI_USE_TIM5 && !STM32_HAS_TIM5 -#error "TIM5 not present in the selected device" -#endif - -#if STM32_QEI_USE_TIM8 && !STM32_HAS_TIM8 -#error "TIM8 not present in the selected device" -#endif - -#if !STM32_QEI_USE_TIM1 && !STM32_QEI_USE_TIM2 && \ - !STM32_QEI_USE_TIM3 && !STM32_QEI_USE_TIM4 && \ - !STM32_QEI_USE_TIM5 && !STM32_QEI_USE_TIM8 -#error "QEI driver activated but no TIM peripheral assigned" -#endif - -#if STM32_QEI_USE_TIM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM1" -#endif - -#if STM32_QEI_USE_TIM2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM2" -#endif - -#if STM32_QEI_USE_TIM3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM3" -#endif - -#if STM32_QEI_USE_TIM4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM4" -#endif - -#if STM32_QEI_USE_TIM5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM5" -#endif - -#if STM32_QEI_USE_TIM8 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM8_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM8" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief QEI count mode. - */ -typedef enum { - QEI_MODE_QUADRATURE = 0, /**< Quadrature encoder mode. */ - QEI_MODE_DIRCLOCK = 1, /**< Direction/Clock mode. */ -} qeimode_t; - -/** - * @brief QEI resolution. - */ -typedef enum { - QEI_SINGLE_EDGE = 0, /**< Count only on edges from first channel. */ - QEI_BOTH_EDGES = 1, /**< Count on both edges (resolution doubles).*/ -} qeiresolution_t; - -/** - * @brief QEI direction inversion. - */ -typedef enum { - QEI_DIRINV_FALSE = 0, /**< Do not invert counter direction. */ - QEI_DIRINV_TRUE = 1, /**< Invert counter direction. */ -} qeidirinv_t; - -/** - * @brief QEI counter type. - */ -typedef uint16_t qeicnt_t; - -/** - * @brief QEI delta type. - */ -typedef int32_t qeidelta_t; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Count mode. - */ - qeimode_t mode; - /** - * @brief Resolution. - */ - qeiresolution_t resolution; - /** - * @brief Direction inversion. - */ - qeidirinv_t dirinv; - /* End of the mandatory fields.*/ -} QEIConfig; - -/** - * @brief Structure representing an QEI driver. - */ -struct QEIDriver { - /** - * @brief Driver state. - */ - qeistate_t state; - /** - * @brief Last count value. - */ - qeicnt_t last; - /** - * @brief Current configuration data. - */ - const QEIConfig *config; -#if defined(QEI_DRIVER_EXT_FIELDS) - QEI_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the TIMx registers block. - */ - stm32_tim_t *tim; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Returns the counter value. - * - * @param[in] qeip pointer to the @p QEIDriver object - * @return The current counter value. - * - * @notapi - */ -#define qei_lld_get_count(qeip) ((qeip)->tim->CNT) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_QEI_USE_TIM1 && !defined(__DOXYGEN__) -extern QEIDriver QEID1; -#endif - -#if STM32_QEI_USE_TIM2 && !defined(__DOXYGEN__) -extern QEIDriver QEID2; -#endif - -#if STM32_QEI_USE_TIM3 && !defined(__DOXYGEN__) -extern QEIDriver QEID3; -#endif - -#if STM32_QEI_USE_TIM4 && !defined(__DOXYGEN__) -extern QEIDriver QEID4; -#endif - -#if STM32_QEI_USE_TIM5 && !defined(__DOXYGEN__) -extern QEIDriver QEID5; -#endif - -#if STM32_QEI_USE_TIM8 && !defined(__DOXYGEN__) -extern QEIDriver QEID8; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void qei_lld_init(void); - void qei_lld_start(QEIDriver *qeip); - void qei_lld_stop(QEIDriver *qeip); - void qei_lld_enable(QEIDriver *qeip); - void qei_lld_disable(QEIDriver *qeip); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_QEI */ - -#endif /* HAL_QEI_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c deleted file mode 100644 index 8ab6176..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c +++ /dev/null @@ -1,818 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - This file was derived from the ICU subsystem code, modified to achieve - timing measurements on 2 and/or 4 channel STM32 timers by Dave Camarillo. - */ -/* - Concepts and parts of this file have been contributed by Fabio Utzig and - Xo Wang. - */ - - -/** - * @file STM32/timcap_lld.c - * @brief STM32 TIMCAP subsystem low level driver header. - * - * @addtogroup TIMCAP - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#if HAL_USE_TIMCAP || defined(__DOXYGEN__) - -#include "stm32_tim.h" -#include "hal_timcap.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief TIMCAPD1 driver identifier. - * @note The driver TIMCAPD1 allocates the complex timer TIM1 when enabled. - */ -#if STM32_TIMCAP_USE_TIM1 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD1; -#endif - -/** - * @brief TIMCAPD2 driver identifier. - * @note The driver TIMCAPD1 allocates the timer TIM2 when enabled. - */ -#if STM32_TIMCAP_USE_TIM2 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD2; -#endif - -/** - * @brief TIMCAPD3 driver identifier. - * @note The driver TIMCAPD1 allocates the timer TIM3 when enabled. - */ -#if STM32_TIMCAP_USE_TIM3 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD3; -#endif - -/** - * @brief TIMCAPD4 driver identifier. - * @note The driver TIMCAPD4 allocates the timer TIM4 when enabled. - */ -#if STM32_TIMCAP_USE_TIM4 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD4; -#endif - -/** - * @brief TIMCAPD5 driver identifier. - * @note The driver TIMCAPD5 allocates the timer TIM5 when enabled. - */ -#if STM32_TIMCAP_USE_TIM5 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD5; -#endif - -/** - * @brief TIMCAPD8 driver identifier. - * @note The driver TIMCAPD8 allocates the timer TIM8 when enabled. - */ -#if STM32_TIMCAP_USE_TIM8 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD8; -#endif - -/** - * @brief TIMCAPD9 driver identifier. - * @note The driver TIMCAPD9 allocates the timer TIM9 when enabled. - */ -#if STM32_TIMCAP_USE_TIM9 || defined(__DOXYGEN__) -TIMCAPDriver TIMCAPD9; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - - -/** - * @brief Returns the maximum channel number for the respective TIMCAP driver. - * Note: different timer perepherials on the STM32 have between 1 and 4 - * CCR registers. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - */ -static timcapchannel_t timcap_get_max_timer_channel(const TIMCAPDriver *timcapp) { - //Choose a sane default value -#if STM32_TIMCAP_USE_TIM1 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD1 ) { - return(TIMCAP_CHANNEL_4); - } -#endif - -#if STM32_TIMCAP_USE_TIM2 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD2 ) { - return(TIMCAP_CHANNEL_4); - } -#endif - -#if STM32_TIMCAP_USE_TIM3 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD3 ) { - return(TIMCAP_CHANNEL_4); - } -#endif - -#if STM32_TIMCAP_USE_TIM4 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD4 ) { - return(TIMCAP_CHANNEL_4); - } -#endif - -#if STM32_TIMCAP_USE_TIM5 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD5 ) { - return(TIMCAP_CHANNEL_4); - } -#endif - -#if STM32_TIMCAP_USE_TIM8 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD8 ) { - return(TIMCAP_CHANNEL_4); - } -#endif - -#if STM32_TIMCAP_USE_TIM9 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD9 ) { - return(TIMCAP_CHANNEL_2); - } -#endif - - /*Return a conservative default value.*/ - return(TIMCAP_CHANNEL_1); -} - - -/** - * @brief Returns the maximum value for the ARR register of a given timer. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - */ -static uint32_t timcap_get_max_arr(const TIMCAPDriver *timcapp) { - //Choose a sane default value -#if STM32_TIMCAP_USE_TIM1 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD1 ) { - return(UINT16_MAX); - } -#endif - -#if STM32_TIMCAP_USE_TIM2 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD2 ) { - return(UINT32_MAX); - } -#endif - -#if STM32_TIMCAP_USE_TIM3 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD3 ) { - return(UINT16_MAX); - } -#endif - -#if STM32_TIMCAP_USE_TIM4 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD4 ) { - return(UINT16_MAX); - } -#endif - -#if STM32_TIMCAP_USE_TIM5 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD5 ) { - return(UINT32_MAX); - } -#endif - -#if STM32_TIMCAP_USE_TIM8 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD8 ) { - return(UINT16_MAX); - } -#endif - -#if STM32_TIMCAP_USE_TIM9 || defined(__DOXYGEN__) - if( timcapp == &TIMCAPD9 ) { - return(UINT16_MAX); - } -#endif - - /*Return a conservative default value.*/ - return(UINT16_MAX); -} - -/** - * @brief Shared IRQ handler. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - */ -static void timcap_lld_serve_interrupt(TIMCAPDriver *timcapp) { - uint16_t sr; - - sr = timcapp->tim->SR; - sr &= timcapp->tim->DIER & STM32_TIM_DIER_IRQ_MASK; - timcapp->tim->SR = ~sr; - - if ((sr & STM32_TIM_SR_CC1IF) != 0 && timcapp->config->capture_cb_array[TIMCAP_CHANNEL_1] != NULL ) - _timcap_isr_invoke_channel1_cb(timcapp); - - if ((sr & STM32_TIM_SR_CC2IF) != 0 && timcapp->config->capture_cb_array[TIMCAP_CHANNEL_2] != NULL ) - _timcap_isr_invoke_channel2_cb(timcapp); - - if ((sr & STM32_TIM_SR_CC3IF) != 0 && timcapp->config->capture_cb_array[TIMCAP_CHANNEL_3] != NULL ) - _timcap_isr_invoke_channel3_cb(timcapp); - - if ((sr & STM32_TIM_SR_CC4IF) != 0 && timcapp->config->capture_cb_array[TIMCAP_CHANNEL_4] != NULL ) - _timcap_isr_invoke_channel4_cb(timcapp); - - if ((sr & STM32_TIM_SR_UIF) != 0 && timcapp->config->overflow_cb != NULL) - _timcap_isr_invoke_overflow_cb(timcapp); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if STM32_TIMCAP_USE_TIM1 -#if !defined(STM32_TIM1_UP_HANDLER) -#error "STM32_TIM1_UP_HANDLER not defined" -#endif -/** - * @brief TIM1 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD1); - - CH_IRQ_EPILOGUE(); -} - -#if !defined(STM32_TIM1_CC_HANDLER) -#error "STM32_TIM1_CC_HANDLER not defined" -#endif -/** - * @brief TIM1 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD1); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM1 */ - -#if STM32_TIMCAP_USE_TIM2 -#if !defined(STM32_TIM2_HANDLER) -#error "STM32_TIM2_HANDLER not defined" -#endif -/** - * @brief TIM2 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM2_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD2); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM2 */ - -#if STM32_TIMCAP_USE_TIM3 -#if !defined(STM32_TIM3_HANDLER) -#error "STM32_TIM3_HANDLER not defined" -#endif -/** - * @brief TIM3 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM3_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD3); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM3 */ - -#if STM32_TIMCAP_USE_TIM4 -#if !defined(STM32_TIM4_HANDLER) -#error "STM32_TIM4_HANDLER not defined" -#endif -/** - * @brief TIM4 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM4_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD4); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM4 */ - -#if STM32_TIMCAP_USE_TIM5 -#if !defined(STM32_TIM5_HANDLER) -#error "STM32_TIM5_HANDLER not defined" -#endif -/** - * @brief TIM5 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM5_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD5); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM5 */ - -#if STM32_TIMCAP_USE_TIM8 -#if !defined(STM32_TIM8_UP_HANDLER) -#error "STM32_TIM8_UP_HANDLER not defined" -#endif -/** - * @brief TIM8 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD8); - - CH_IRQ_EPILOGUE(); -} - -#if !defined(STM32_TIM8_CC_HANDLER) -#error "STM32_TIM8_CC_HANDLER not defined" -#endif -/** - * @brief TIM8 compare interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD8); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM8 */ - -#if STM32_TIMCAP_USE_TIM9 -#if !defined(STM32_TIM9_HANDLER) -#error "STM32_TIM9_HANDLER not defined" -#endif -/** - * @brief TIM9 interrupt handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @isr - */ -CH_IRQ_HANDLER(STM32_TIM9_HANDLER) { - - CH_IRQ_PROLOGUE(); - - timcap_lld_serve_interrupt(&TIMCAPD9); - - CH_IRQ_EPILOGUE(); -} -#endif /* STM32_TIMCAP_USE_TIM9 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level TIMCAP driver initialization. - * - * @notapi - */ -void timcap_lld_init(void) { - -#if STM32_TIMCAP_USE_TIM1 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD1); - TIMCAPD1.tim = STM32_TIM1; -#endif - -#if STM32_TIMCAP_USE_TIM2 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD2); - TIMCAPD2.tim = STM32_TIM2; -#endif - -#if STM32_TIMCAP_USE_TIM3 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD3); - TIMCAPD3.tim = STM32_TIM3; -#endif - -#if STM32_TIMCAP_USE_TIM4 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD4); - TIMCAPD4.tim = STM32_TIM4; -#endif - -#if STM32_TIMCAP_USE_TIM5 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD5); - TIMCAPD5.tim = STM32_TIM5; -#endif - -#if STM32_TIMCAP_USE_TIM8 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD8); - TIMCAPD8.tim = STM32_TIM8; -#endif - -#if STM32_TIMCAP_USE_TIM9 - /* Driver initialization.*/ - timcapObjectInit(&TIMCAPD9); - TIMCAPD9.tim = STM32_TIM9; -#endif -} - -/** - * @brief Configures and activates the TIMCAP peripheral. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -void timcap_lld_start(TIMCAPDriver *timcapp) { - uint32_t psc; - - const timcapchannel_t tim_max_channel = timcap_get_max_timer_channel(timcapp); - - if (timcapp->state == TIMCAP_STOP) { - /* Clock activation and timer reset.*/ -#if STM32_TIMCAP_USE_TIM1 - if (&TIMCAPD1 == timcapp) { - rccEnableTIM1(FALSE); - rccResetTIM1(); - nvicEnableVector(STM32_TIM1_UP_NUMBER, STM32_TIMCAP_TIM1_IRQ_PRIORITY); - nvicEnableVector(STM32_TIM1_CC_NUMBER, STM32_TIMCAP_TIM1_IRQ_PRIORITY); -#if defined(STM32_TIM1CLK) - timcapp->clock = STM32_TIM1CLK; -#else - timcapp->clock = STM32_TIMCLK2; -#endif - } -#endif -#if STM32_TIMCAP_USE_TIM2 - if (&TIMCAPD2 == timcapp) { - rccEnableTIM2(FALSE); - rccResetTIM2(); - nvicEnableVector(STM32_TIM2_NUMBER, STM32_TIMCAP_TIM2_IRQ_PRIORITY); - timcapp->clock = STM32_TIMCLK1; - } -#endif -#if STM32_TIMCAP_USE_TIM3 - if (&TIMCAPD3 == timcapp) { - rccEnableTIM3(FALSE); - rccResetTIM3(); - nvicEnableVector(STM32_TIM3_NUMBER, STM32_TIMCAP_TIM3_IRQ_PRIORITY); - timcapp->clock = STM32_TIMCLK1; - } -#endif -#if STM32_TIMCAP_USE_TIM4 - if (&TIMCAPD4 == timcapp) { - rccEnableTIM4(FALSE); - rccResetTIM4(); - nvicEnableVector(STM32_TIM4_NUMBER, STM32_TIMCAP_TIM4_IRQ_PRIORITY); - timcapp->clock = STM32_TIMCLK1; - } -#endif -#if STM32_TIMCAP_USE_TIM5 - if (&TIMCAPD5 == timcapp) { - rccEnableTIM5(FALSE); - rccResetTIM5(); - nvicEnableVector(STM32_TIM5_NUMBER, STM32_TIMCAP_TIM5_IRQ_PRIORITY); - timcapp->clock = STM32_TIMCLK1; - } -#endif -#if STM32_TIMCAP_USE_TIM8 - if (&TIMCAPD8 == timcapp) { - rccEnableTIM8(FALSE); - rccResetTIM8(); - nvicEnableVector(STM32_TIM8_UP_NUMBER, STM32_TIMCAP_TIM8_IRQ_PRIORITY); - nvicEnableVector(STM32_TIM8_CC_NUMBER, STM32_TIMCAP_TIM8_IRQ_PRIORITY); -#if defined(STM32_TIM8CLK) - timcapp->clock = STM32_TIM8CLK; -#else - timcapp->clock = STM32_TIMCLK2; -#endif - } -#endif -#if STM32_TIMCAP_USE_TIM9 - if (&TIMCAPD9 == timcapp) { - rccEnableTIM9(FALSE); - rccResetTIM9(); - nvicEnableVector(STM32_TIM9_NUMBER, STM32_TIMCAP_TIM9_IRQ_PRIORITY); - timcapp->clock = STM32_TIMCLK1; - } -#endif - } - else { - /* Driver re-configuration scenario, it must be stopped first.*/ - timcapp->tim->CR1 = 0; /* Timer disabled. */ - timcapp->tim->DIER = timcapp->config->dier &/* DMA-related DIER settings. */ - ~STM32_TIM_DIER_IRQ_MASK; - timcapp->tim->SR = 0; /* Clear eventual pending IRQs. */ - timcapp->tim->CCR[0] = 0; /* Comparator 1 disabled. */ - timcapp->tim->CCR[1] = 0; /* Comparator 2 disabled. */ - if( tim_max_channel >= TIMCAP_CHANNEL_3 ) - timcapp->tim->CCR[2] = 0; /* Comparator 3 disabled. */ - if( tim_max_channel >= TIMCAP_CHANNEL_4 ) - timcapp->tim->CCR[3] = 0; /* Comparator 4 disabled. */ - timcapp->tim->CNT = 0; /* Counter reset to zero. */ - } - - /* Timer configuration.*/ - psc = (timcapp->clock / timcapp->config->frequency) - 1; - osalDbgAssert((psc <= 0xFFFF) && - ((psc + 1) * timcapp->config->frequency) == timcapp->clock, - "invalid frequency"); - timcapp->tim->PSC = (uint16_t)psc; - timcapp->tim->ARR = timcap_get_max_arr(timcapp); - - timcapp->tim->CCMR1 = 0; - timcapp->tim->CCMR2 = 0; - timcapp->tim->CCER = 0; - - timcapchannel_t chan = TIMCAP_CHANNEL_1; - - /*go through each non-NULL callback channel and enable the capture register on rising/falling edge*/ - for( chan = TIMCAP_CHANNEL_1; chan <= tim_max_channel; chan++ ) { - if( timcapp->config->capture_cb_array[chan] == NULL ) { - continue; - } - - switch (chan) { - case TIMCAP_CHANNEL_1: - /*CCMR1_CC1S = 01 = CH1 Input on TI1.*/ - timcapp->tim->CCMR1 |= STM32_TIM_CCMR1_CC1S(1); - break; - case TIMCAP_CHANNEL_2: - /*CCMR1_CC2S = 10 = CH2 Input on TI1.*/ - timcapp->tim->CCMR1 |= STM32_TIM_CCMR1_CC2S(1); - break; - case TIMCAP_CHANNEL_3: - timcapp->tim->CCMR2 |= STM32_TIM_CCMR2_CC3S(1); - break; - case TIMCAP_CHANNEL_4: - timcapp->tim->CCMR2 |= STM32_TIM_CCMR2_CC4S(1); - break; - } - - /* The CCER settings depend on the selected trigger mode. - TIMCAP_INPUT_DISABLED: Input not used. - TIMCAP_INPUT_ACTIVE_HIGH: Active on rising edge, idle on falling edge. - TIMCAP_INPUT_ACTIVE_LOW: Active on falling edge, idle on rising edge.*/ - if (timcapp->config->modes[chan] == TIMCAP_INPUT_ACTIVE_HIGH) { - switch (chan) { - case TIMCAP_CHANNEL_1: - timcapp->tim->CCER |= STM32_TIM_CCER_CC1E; - break; - case TIMCAP_CHANNEL_2: - timcapp->tim->CCER |= STM32_TIM_CCER_CC2E; - break; - case TIMCAP_CHANNEL_3: - timcapp->tim->CCER |= STM32_TIM_CCER_CC3E; - break; - case TIMCAP_CHANNEL_4: - timcapp->tim->CCER |= STM32_TIM_CCER_CC4E; - break; - } - } - else if (timcapp->config->modes[chan] == TIMCAP_INPUT_ACTIVE_LOW) { - switch (chan) { - case TIMCAP_CHANNEL_1: - timcapp->tim->CCER |= STM32_TIM_CCER_CC1E | STM32_TIM_CCER_CC1P; - break; - case TIMCAP_CHANNEL_2: - timcapp->tim->CCER |= STM32_TIM_CCER_CC2E | STM32_TIM_CCER_CC2P; - break; - case TIMCAP_CHANNEL_3: - timcapp->tim->CCER |= STM32_TIM_CCER_CC3E | STM32_TIM_CCER_CC3P; - break; - case TIMCAP_CHANNEL_4: - timcapp->tim->CCER |= STM32_TIM_CCER_CC4E | STM32_TIM_CCER_CC4P; - break; - } - } - else { - switch (chan) { - case TIMCAP_CHANNEL_1: - timcapp->tim->CCER &= ~STM32_TIM_CCER_CC1E; - break; - case TIMCAP_CHANNEL_2: - timcapp->tim->CCER &= ~STM32_TIM_CCER_CC2E; - break; - case TIMCAP_CHANNEL_3: - timcapp->tim->CCER &= ~STM32_TIM_CCER_CC3E; - break; - case TIMCAP_CHANNEL_4: - timcapp->tim->CCER &= ~STM32_TIM_CCER_CC4E; - break; - } - } - /* Direct pointers to the capture registers in order to make reading - data faster from within callbacks.*/ - timcapp->ccr_p[chan] = &timcapp->tim->CCR[chan]; - } - - /* SMCR_TS = 101, input is TI1FP1.*/ - timcapp->tim->SMCR = STM32_TIM_SMCR_TS(5); -} - -/** - * @brief Deactivates the TIMCAP peripheral. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -void timcap_lld_stop(TIMCAPDriver *timcapp) { - - if (timcapp->state == TIMCAP_READY) { - /* Clock deactivation.*/ - timcapp->tim->CR1 = 0; /* Timer disabled. */ - timcapp->tim->DIER = 0; /* All IRQs disabled. */ - timcapp->tim->SR = 0; /* Clear eventual pending IRQs. */ - -#if STM32_TIMCAP_USE_TIM1 - if (&TIMCAPD1 == timcapp) { - nvicDisableVector(STM32_TIM1_UP_NUMBER); - nvicDisableVector(STM32_TIM1_CC_NUMBER); - rccDisableTIM1(FALSE); - } -#endif -#if STM32_TIMCAP_USE_TIM2 - if (&TIMCAPD2 == timcapp) { - nvicDisableVector(STM32_TIM2_NUMBER); - rccDisableTIM2(FALSE); - } -#endif -#if STM32_TIMCAP_USE_TIM3 - if (&TIMCAPD3 == timcapp) { - nvicDisableVector(STM32_TIM3_NUMBER); - rccDisableTIM3(FALSE); - } -#endif -#if STM32_TIMCAP_USE_TIM4 - if (&TIMCAPD4 == timcapp) { - nvicDisableVector(STM32_TIM4_NUMBER); - rccDisableTIM4(FALSE); - } -#endif -#if STM32_TIMCAP_USE_TIM5 - if (&TIMCAPD5 == timcapp) { - nvicDisableVector(STM32_TIM5_NUMBER); - rccDisableTIM5(FALSE); - } -#endif -#if STM32_TIMCAP_USE_TIM8 - if (&TIMCAPD8 == timcapp) { - nvicDisableVector(STM32_TIM8_UP_NUMBER); - nvicDisableVector(STM32_TIM8_CC_NUMBER); - rccDisableTIM8(FALSE); - } -#endif -#if STM32_TIMCAP_USE_TIM9 - if (&TIMCAPD9 == timcapp) { - nvicDisableVector(STM32_TIM9_NUMBER); - rccDisableTIM9(FALSE); - } -#endif - } -} - -/** - * @brief Enables the input capture. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -void timcap_lld_enable(TIMCAPDriver *timcapp) { - - timcapp->tim->EGR |= STM32_TIM_EGR_UG; - timcapp->tim->SR = 0; /* Clear pending IRQs (if any). */ - - timcapchannel_t chan = TIMCAP_CHANNEL_1; - const timcapchannel_t tim_max_channel = timcap_get_max_timer_channel(timcapp); - for( chan = TIMCAP_CHANNEL_1; chan <= tim_max_channel; chan++ ) { - if( timcapp->config->capture_cb_array[chan] != NULL - && timcapp->config->modes[chan] != TIMCAP_INPUT_DISABLED ) { - switch (chan) { - case TIMCAP_CHANNEL_1: - timcapp->tim->DIER |= STM32_TIM_DIER_CC1IE; - break; - case TIMCAP_CHANNEL_2: - timcapp->tim->DIER |= STM32_TIM_DIER_CC2IE; - break; - case TIMCAP_CHANNEL_3: - timcapp->tim->DIER |= STM32_TIM_DIER_CC3IE; - break; - case TIMCAP_CHANNEL_4: - timcapp->tim->DIER |= STM32_TIM_DIER_CC4IE; - break; - } - } - } - - if (timcapp->config->overflow_cb != NULL) - timcapp->tim->DIER |= STM32_TIM_DIER_UIE; - - timcapp->tim->CR1 = STM32_TIM_CR1_URS | STM32_TIM_CR1_CEN | timcapp->config->cr1; -} - -/** - * @brief Disables the input capture. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @notapi - */ -void timcap_lld_disable(TIMCAPDriver *timcapp) { - - timcapp->tim->CR1 = 0; /* Initially stopped. */ - timcapp->tim->SR = 0; /* Clear pending IRQs (if any). */ - - /* All interrupts disabled.*/ - timcapp->tim->DIER &= ~STM32_TIM_DIER_IRQ_MASK; -} - -#endif /* HAL_USE_TIMCAP */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h deleted file mode 100644 index d39c438..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h +++ /dev/null @@ -1,390 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file STM32/timcap_lld.h - * @brief STM32 TIMCAP subsystem low level driver header. - * - * @addtogroup TIMCAP - * @{ - */ - -#ifndef _TIMCAP_LLD_H_ -#define _TIMCAP_LLD_H_ - -#include "ch.h" -#include "hal.h" -#include "stm32_tim.h" - - -#if HAL_USE_TIMCAP || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief TIMCAPD1 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD1 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM1) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM1 FALSE -#endif - -/** - * @brief TIMCAPD2 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD2 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM2) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM2 FALSE -#endif - -/** - * @brief TIMCAPD3 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD3 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM3) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM3 FALSE -#endif - -/** - * @brief TIMCAPD4 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD4 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM4) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM4 FALSE -#endif - -/** - * @brief TIMCAPD5 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD5 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM5) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM5 FALSE -#endif - -/** - * @brief TIMCAPD8 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD8 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM8) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM8 FALSE -#endif - -/** - * @brief TIMCAPD9 driver enable switch. - * @details If set to @p TRUE the support for TIMCAPD9 is included. - * @note The default is @p TRUE. - */ -#if !defined(STM32_TIMCAP_USE_TIM9) || defined(__DOXYGEN__) -#define STM32_TIMCAP_USE_TIM9 FALSE -#endif - -/** - * @brief TIMCAPD1 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 7 -#endif - -/** - * @brief TIMCAPD2 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 7 -#endif - -/** - * @brief TIMCAPD3 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 7 -#endif - -/** - * @brief TIMCAPD4 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 7 -#endif - -/** - * @brief TIMCAPD5 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 7 -#endif - -/** - * @brief TIMCAPD8 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM8_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 7 -#endif - -/** - * @brief TIMCAPD9 interrupt priority level setting. - */ -#if !defined(STM32_TIMCAP_TIM9_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 7 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if STM32_TIMCAP_USE_TIM1 && !STM32_HAS_TIM1 -#error "TIM1 not present in the selected device" -#endif - -#if STM32_TIMCAP_USE_TIM2 && !STM32_HAS_TIM2 -#error "TIM2 not present in the selected device" -#endif - -#if STM32_TIMCAP_USE_TIM3 && !STM32_HAS_TIM3 -#error "TIM3 not present in the selected device" -#endif - -#if STM32_TIMCAP_USE_TIM4 && !STM32_HAS_TIM4 -#error "TIM4 not present in the selected device" -#endif - -#if STM32_TIMCAP_USE_TIM5 && !STM32_HAS_TIM5 -#error "TIM5 not present in the selected device" -#endif - -#if STM32_TIMCAP_USE_TIM8 && !STM32_HAS_TIM8 -#error "TIM8 not present in the selected device" -#endif - -#if STM32_TIMCAP_USE_TIM9 && !STM32_HAS_TIM9 -#error "TIM9 not present in the selected device" -#endif - -#if !STM32_TIMCAP_USE_TIM1 && !STM32_TIMCAP_USE_TIM2 && \ - !STM32_TIMCAP_USE_TIM3 && !STM32_TIMCAP_USE_TIM4 && \ - !STM32_TIMCAP_USE_TIM5 && !STM32_TIMCAP_USE_TIM8 && \ - !STM32_TIMCAP_USE_TIM9 -#error "TIMCAP driver activated but no TIM peripheral assigned" -#endif - -#if STM32_TIMCAP_USE_TIM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM1" -#endif - -#if STM32_TIMCAP_USE_TIM2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM2" -#endif - -#if STM32_TIMCAP_USE_TIM3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM3" -#endif - -#if STM32_TIMCAP_USE_TIM4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM4" -#endif - -#if STM32_TIMCAP_USE_TIM5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM5" -#endif - -#if STM32_TIMCAP_USE_TIM8 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM8_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM8" -#endif - -#if STM32_TIMCAP_USE_TIM9 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(STM32_TIMCAP_TIM9_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to TIM9" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief TIMCAP driver mode. - */ -typedef enum { - TIMCAP_INPUT_DISABLED = 0, - TIMCAP_INPUT_ACTIVE_HIGH = 1, /**< Trigger on rising edge. */ - TIMCAP_INPUT_ACTIVE_LOW = 2, /**< Trigger on falling edge. */ -} timcapmode_t; - -/** - * @brief TIMCAP frequency type. - */ -typedef uint32_t timcapfreq_t; - -/** - * @brief TIMCAP channel type. - */ -typedef enum { - TIMCAP_CHANNEL_1 = 0, /**< Use TIMxCH1. */ - TIMCAP_CHANNEL_2 = 1, /**< Use TIMxCH2. */ - TIMCAP_CHANNEL_3 = 2, /**< Use TIMxCH3. */ - TIMCAP_CHANNEL_4 = 3, /**< Use TIMxCH4. */ -} timcapchannel_t; - - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Driver mode. - */ - timcapmode_t modes[4]; - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - timcapfreq_t frequency; - - /** - * @brief Callback when a capture occurs - */ - timcapcallback_t capture_cb_array[4]; - - /** - * @brief Callback for timer overflow. - */ - timcapcallback_t overflow_cb; - - /* End of the mandatory fields.*/ - - /** - * @brief TIM DIER register initialization data. - * @note The value of this field should normally be equal to zero. - * @note Only the DMA-related bits can be specified in this field. - */ - uint32_t dier; - - /** - * @brief TIM CR1 register initialization data. - * @note The value of this field should normally be equal to zero. - */ - uint32_t cr1; -} TIMCAPConfig; - -/** - * @brief Structure representing an TIMCAP driver. - */ -struct TIMCAPDriver { - /** - * @brief Driver state. - */ - timcapstate_t state; - /** - * @brief Current configuration data. - */ - const TIMCAPConfig *config; -#if defined(TIMCAP_DRIVER_EXT_FIELDS) - TIMCAP_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Timer base clock. - */ - uint32_t clock; - /** - * @brief Pointer to the TIMx registers block. - */ - stm32_tim_t *tim; - /** - * @brief CCR register used for capture. - */ - volatile uint32_t *ccr_p[4]; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -//FIXME document this -#define timcap_lld_get_ccr(timcapp, channel) (*((timcapp)->ccr_p[channel]) + 1) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if STM32_TIMCAP_USE_TIM1 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD1; -#endif - -#if STM32_TIMCAP_USE_TIM2 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD2; -#endif - -#if STM32_TIMCAP_USE_TIM3 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD3; -#endif - -#if STM32_TIMCAP_USE_TIM4 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD4; -#endif - -#if STM32_TIMCAP_USE_TIM5 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD5; -#endif - -#if STM32_TIMCAP_USE_TIM8 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD8; -#endif - -#if STM32_TIMCAP_USE_TIM9 && !defined(__DOXYGEN__) -extern TIMCAPDriver TIMCAPD9; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void timcap_lld_init(void); - void timcap_lld_start(TIMCAPDriver *timcapp); - void timcap_lld_stop(TIMCAPDriver *timcapp); - void timcap_lld_enable(TIMCAPDriver *timcapp); - void timcap_lld_disable(TIMCAPDriver *timcapp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_TIMCAP */ - -#endif /* _TIMCAP_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h deleted file mode 100644 index ca2dc49..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h +++ /dev/null @@ -1,929 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file stm32_otg.h - * @brief STM32 OTG registers layout header. - * - * @addtogroup USB - * @{ - */ - - -#ifndef _STM32_OTG_H_ -#define _STM32_OTG_H_ - -/** - * @brief Number of the implemented endpoints in OTG_FS. - * @details This value does not include the endpoint 0 that is always present. - */ -#define STM32_OTG1_ENDOPOINTS_NUMBER 3 - -/** - * @brief Number of the implemented endpoints in OTG_HS. - * @details This value does not include the endpoint 0 that is always present. - */ -#define STM32_OTG2_ENDOPOINTS_NUMBER 5 - -/** - * @brief OTG_FS FIFO memory size in words. - */ -#define STM32_OTG1_FIFO_MEM_SIZE 320 - -/** - * @brief OTG_HS FIFO memory size in words. - */ -#define STM32_OTG2_FIFO_MEM_SIZE 1024 - -/** - * @brief Host channel registers group. - */ -typedef struct { - volatile uint32_t HCCHAR; /**< @brief Host channel characteristics - register. */ - volatile uint32_t resvd8; - volatile uint32_t HCINT; /**< @brief Host channel interrupt register.*/ - volatile uint32_t HCINTMSK; /**< @brief Host channel interrupt mask - register. */ - volatile uint32_t HCTSIZ; /**< @brief Host channel transfer size - register. */ - volatile uint32_t resvd14; - volatile uint32_t resvd18; - volatile uint32_t resvd1c; -} stm32_otg_host_chn_t; - -/** - * @brief Device input endpoint registers group. - */ -typedef struct { - volatile uint32_t DIEPCTL; /**< @brief Device control IN endpoint - control register. */ - volatile uint32_t resvd4; - volatile uint32_t DIEPINT; /**< @brief Device IN endpoint interrupt - register. */ - volatile uint32_t resvdC; - volatile uint32_t DIEPTSIZ; /**< @brief Device IN endpoint transfer size - register. */ - volatile uint32_t resvd14; - volatile uint32_t DTXFSTS; /**< @brief Device IN endpoint transmit FIFO - status register. */ - volatile uint32_t resvd1C; -} stm32_otg_in_ep_t; - -/** - * @brief Device output endpoint registers group. - */ -typedef struct { - volatile uint32_t DOEPCTL; /**< @brief Device control OUT endpoint - control register. */ - volatile uint32_t resvd4; - volatile uint32_t DOEPINT; /**< @brief Device OUT endpoint interrupt - register. */ - volatile uint32_t resvdC; - volatile uint32_t DOEPTSIZ; /**< @brief Device OUT endpoint transfer - size register. */ - volatile uint32_t resvd14; - volatile uint32_t resvd18; - volatile uint32_t resvd1C; -} stm32_otg_out_ep_t; - -/** - * @brief USB registers memory map. - */ -typedef struct { - volatile uint32_t GOTGCTL; /**< @brief OTG control and status register.*/ - volatile uint32_t GOTGINT; /**< @brief OTG interrupt register. */ - volatile uint32_t GAHBCFG; /**< @brief AHB configuration register. */ - volatile uint32_t GUSBCFG; /**< @brief USB configuration register. */ - volatile uint32_t GRSTCTL; /**< @brief Reset register size. */ - volatile uint32_t GINTSTS; /**< @brief Interrupt register. */ - volatile uint32_t GINTMSK; /**< @brief Interrupt mask register. */ - volatile uint32_t GRXSTSR; /**< @brief Receive status debug read - register. */ - volatile uint32_t GRXSTSP; /**< @brief Receive status read/pop - register. */ - volatile uint32_t GRXFSIZ; /**< @brief Receive FIFO size register. */ - volatile uint32_t DIEPTXF0; /**< @brief Endpoint 0 transmit FIFO size - register. */ - volatile uint32_t HNPTXSTS; /**< @brief Non-periodic transmit FIFO/queue - status register. */ - volatile uint32_t resvd30; - volatile uint32_t resvd34; - volatile uint32_t GCCFG; /**< @brief General core configuration. */ - volatile uint32_t CID; /**< @brief Core ID register. */ - volatile uint32_t resvd58[48]; - volatile uint32_t HPTXFSIZ; /**< @brief Host periodic transmit FIFO size - register. */ - volatile uint32_t DIEPTXF[15];/**< @brief Device IN endpoint transmit FIFO - size registers. */ - volatile uint32_t resvd140[176]; - volatile uint32_t HCFG; /**< @brief Host configuration register. */ - volatile uint32_t HFIR; /**< @brief Host frame interval register. */ - volatile uint32_t HFNUM; /**< @brief Host frame number/frame time - Remaining register. */ - volatile uint32_t resvd40C; - volatile uint32_t HPTXSTS; /**< @brief Host periodic transmit FIFO/queue - status register. */ - volatile uint32_t HAINT; /**< @brief Host all channels interrupt - register. */ - volatile uint32_t HAINTMSK; /**< @brief Host all channels interrupt mask - register. */ - volatile uint32_t resvd41C[9]; - volatile uint32_t HPRT; /**< @brief Host port control and status - register. */ - volatile uint32_t resvd444[47]; - stm32_otg_host_chn_t hc[16]; /**< @brief Host channels array. */ - volatile uint32_t resvd700[64]; - volatile uint32_t DCFG; /**< @brief Device configuration register. */ - volatile uint32_t DCTL; /**< @brief Device control register. */ - volatile uint32_t DSTS; /**< @brief Device status register. */ - volatile uint32_t resvd80C; - volatile uint32_t DIEPMSK; /**< @brief Device IN endpoint common - interrupt mask register. */ - volatile uint32_t DOEPMSK; /**< @brief Device OUT endpoint common - interrupt mask register. */ - volatile uint32_t DAINT; /**< @brief Device all endpoints interrupt - register. */ - volatile uint32_t DAINTMSK; /**< @brief Device all endpoints interrupt - mask register. */ - volatile uint32_t resvd820; - volatile uint32_t resvd824; - volatile uint32_t DVBUSDIS; /**< @brief Device VBUS discharge time - register. */ - volatile uint32_t DVBUSPULSE; /**< @brief Device VBUS pulsing time - register. */ - volatile uint32_t resvd830; - volatile uint32_t DIEPEMPMSK; /**< @brief Device IN endpoint FIFO empty - interrupt mask register. */ - volatile uint32_t resvd838; - volatile uint32_t resvd83C; - volatile uint32_t resvd840[16]; - volatile uint32_t resvd880[16]; - volatile uint32_t resvd8C0[16]; - stm32_otg_in_ep_t ie[16]; /**< @brief Input endpoints. */ - stm32_otg_out_ep_t oe[16]; /**< @brief Output endpoints. */ - volatile uint32_t resvdD00[64]; - volatile uint32_t PCGCCTL; /**< @brief Power and clock gating control - register. */ - volatile uint32_t resvdE04[127]; - volatile uint32_t FIFO[16][1024]; -} stm32_otg_t; - -/** - * @name GOTGCTL register bit definitions - * @{ - */ -#define GOTGCTL_BSVLD (1U<<19) /**< B-Session Valid. */ -#define GOTGCTL_ASVLD (1U<<18) /**< A-Session Valid. */ -#define GOTGCTL_DBCT (1U<<17) /**< Long/Short debounce time. */ -#define GOTGCTL_CIDSTS (1U<<16) /**< Connector ID status. */ -#define GOTGCTL_EHEN (1U<<12) -#define GOTGCTL_DHNPEN (1U<<11) /**< Device HNP enabled. */ -#define GOTGCTL_HSHNPEN (1U<<10) /**< Host Set HNP enable. */ -#define GOTGCTL_HNPRQ (1U<<9) /**< HNP request. */ -#define GOTGCTL_HNGSCS (1U<<8) /**< Host negotiation success. */ -#define GOTGCTL_BVALOVAL (1U<<7) -#define GOTGCTL_BVALOEN (1U<<6) -#define GOTGCTL_AVALOVAL (1U<<5) -#define GOTGCTL_AVALOEN (1U<<4) -#define GOTGCTL_VBVALOVAL (1U<<3) -#define GOTGCTL_VBVALOEN (1U<<2) -#define GOTGCTL_SRQ (1U<<1) /**< Session request. */ -#define GOTGCTL_SRQSCS (1U<<0) /**< Session request success. */ -/** @} */ - -/** - * @name GOTGINT register bit definitions - * @{ - */ -#define GOTGINT_DBCDNE (1U<<19) /**< Debounce done. */ -#define GOTGINT_ADTOCHG (1U<<18) /**< A-Device timeout change. */ -#define GOTGINT_HNGDET (1U<<17) /**< Host negotiation detected. */ -#define GOTGINT_HNSSCHG (1U<<9) /**< Host negotiation success - status change. */ -#define GOTGINT_SRSSCHG (1U<<8) /**< Session request success - status change. */ -#define GOTGINT_SEDET (1U<<2) /**< Session end detected. */ -/** @} */ - -/** - * @name GAHBCFG register bit definitions - * @{ - */ -#define GAHBCFG_PTXFELVL (1U<<8) /**< Periodic TxFIFO empty - level. */ -#define GAHBCFG_TXFELVL (1U<<7) /**< Non-periodic TxFIFO empty - level. */ -#define GAHBCFG_DMAEN (1U<<5) /**< DMA enable (HS only). */ -#define GAHBCFG_HBSTLEN_MASK (15U<<1) /**< Burst length/type mask (HS - only). */ -#define GAHBCFG_HBSTLEN(n) ((n)<<1) /**< Burst length/type (HS - only). */ -#define GAHBCFG_GINTMSK (1U<<0) /**< Global interrupt mask. */ -/** @} */ - -/** - * @name GUSBCFG register bit definitions - * @{ - */ -#define GUSBCFG_CTXPKT (1U<<31) /**< Corrupt Tx packet. */ -#define GUSBCFG_FDMOD (1U<<30) /**< Force Device Mode. */ -#define GUSBCFG_FHMOD (1U<<29) /**< Force Host Mode. */ -#define GUSBCFG_TRDT_MASK (15U<<10) /**< USB Turnaround time field - mask. */ -#define GUSBCFG_TRDT(n) ((n)<<10) /**< USB Turnaround time field - value. */ -#define GUSBCFG_HNPCAP (1U<<9) /**< HNP-Capable. */ -#define GUSBCFG_SRPCAP (1U<<8) /**< SRP-Capable. */ -#define GUSBCFG_PHYSEL (1U<<6) /**< USB 2.0 High-Speed PHY or - USB 1.1 Full-Speed serial - transceiver Select. */ -#define GUSBCFG_TOCAL_MASK (7U<<0) /**< HS/FS timeout calibration - field mask. */ -#define GUSBCFG_TOCAL(n) ((n)<<0) /**< HS/FS timeout calibration - field value. */ -/** @} */ - -/** - * @name GRSTCTL register bit definitions - * @{ - */ -#define GRSTCTL_AHBIDL (1U<<31) /**< AHB Master Idle. */ -#define GRSTCTL_TXFNUM_MASK (31U<<6) /**< TxFIFO number field mask. */ -#define GRSTCTL_TXFNUM(n) ((n)<<6) /**< TxFIFO number field value. */ -#define GRSTCTL_TXFFLSH (1U<<5) /**< TxFIFO flush. */ -#define GRSTCTL_RXFFLSH (1U<<4) /**< RxFIFO flush. */ -#define GRSTCTL_FCRST (1U<<2) /**< Host frame counter reset. */ -#define GRSTCTL_HSRST (1U<<1) /**< HClk soft reset. */ -#define GRSTCTL_CSRST (1U<<0) /**< Core soft reset. */ -/** @} */ - -/** - * @name GINTSTS register bit definitions - * @{ - */ -#define GINTSTS_WKUPINT (1U<<31) /**< Resume/Remote wakeup - detected interrupt. */ -#define GINTSTS_SRQINT (1U<<30) /**< Session request/New session - detected interrupt. */ -#define GINTSTS_DISCINT (1U<<29) /**< Disconnect detected - interrupt. */ -#define GINTSTS_CIDSCHG (1U<<28) /**< Connector ID status change.*/ -#define GINTSTS_PTXFE (1U<<26) /**< Periodic TxFIFO empty. */ -#define GINTSTS_HCINT (1U<<25) /**< Host channels interrupt. */ -#define GINTSTS_HPRTINT (1U<<24) /**< Host port interrupt. */ -#define GINTSTS_IPXFR (1U<<21) /**< Incomplete periodic - transfer. */ -#define GINTSTS_IISOOXFR (1U<<21) /**< Incomplete isochronous OUT - transfer. */ -#define GINTSTS_IISOIXFR (1U<<20) /**< Incomplete isochronous IN - transfer. */ -#define GINTSTS_OEPINT (1U<<19) /**< OUT endpoints interrupt. */ -#define GINTSTS_IEPINT (1U<<18) /**< IN endpoints interrupt. */ -#define GINTSTS_EOPF (1U<<15) /**< End of periodic frame - interrupt. */ -#define GINTSTS_ISOODRP (1U<<14) /**< Isochronous OUT packet - dropped interrupt. */ -#define GINTSTS_ENUMDNE (1U<<13) /**< Enumeration done. */ -#define GINTSTS_USBRST (1U<<12) /**< USB reset. */ -#define GINTSTS_USBSUSP (1U<<11) /**< USB suspend. */ -#define GINTSTS_ESUSP (1U<<10) /**< Early suspend. */ -#define GINTSTS_GONAKEFF (1U<<7) /**< Global OUT NAK effective. */ -#define GINTSTS_GINAKEFF (1U<<6) /**< Global IN non-periodic NAK - effective. */ -#define GINTSTS_NPTXFE (1U<<5) /**< Non-periodic TxFIFO empty. */ -#define GINTSTS_RXFLVL (1U<<4) /**< RxFIFO non-empty. */ -#define GINTSTS_SOF (1U<<3) /**< Start of frame. */ -#define GINTSTS_OTGINT (1U<<2) /**< OTG interrupt. */ -#define GINTSTS_MMIS (1U<<1) /**< Mode Mismatch interrupt. */ -#define GINTSTS_CMOD (1U<<0) /**< Current mode of operation. */ -/** @} */ - -/** - * @name GINTMSK register bit definitions - * @{ - */ -#define GINTMSK_WKUM (1U<<31) /**< Resume/remote wakeup - detected interrupt mask. */ -#define GINTMSK_SRQM (1U<<30) /**< Session request/New session - detected interrupt mask. */ -#define GINTMSK_DISCM (1U<<29) /**< Disconnect detected - interrupt mask. */ -#define GINTMSK_CIDSCHGM (1U<<28) /**< Connector ID status change - mask. */ -#define GINTMSK_PTXFEM (1U<<26) /**< Periodic TxFIFO empty mask.*/ -#define GINTMSK_HCM (1U<<25) /**< Host channels interrupt - mask. */ -#define GINTMSK_HPRTM (1U<<24) /**< Host port interrupt mask. */ -#define GINTMSK_IPXFRM (1U<<21) /**< Incomplete periodic - transfer mask. */ -#define GINTMSK_IISOOXFRM (1U<<21) /**< Incomplete isochronous OUT - transfer mask. */ -#define GINTMSK_IISOIXFRM (1U<<20) /**< Incomplete isochronous IN - transfer mask. */ -#define GINTMSK_OEPM (1U<<19) /**< OUT endpoints interrupt - mask. */ -#define GINTMSK_IEPM (1U<<18) /**< IN endpoints interrupt - mask. */ -#define GINTMSK_EOPFM (1U<<15) /**< End of periodic frame - interrupt mask. */ -#define GINTMSK_ISOODRPM (1U<<14) /**< Isochronous OUT packet - dropped interrupt mask. */ -#define GINTMSK_ENUMDNEM (1U<<13) /**< Enumeration done mask. */ -#define GINTMSK_USBRSTM (1U<<12) /**< USB reset mask. */ -#define GINTMSK_USBSUSPM (1U<<11) /**< USB suspend mask. */ -#define GINTMSK_ESUSPM (1U<<10) /**< Early suspend mask. */ -#define GINTMSK_GONAKEFFM (1U<<7) /**< Global OUT NAK effective - mask. */ -#define GINTMSK_GINAKEFFM (1U<<6) /**< Global non-periodic IN NAK - effective mask. */ -#define GINTMSK_NPTXFEM (1U<<5) /**< Non-periodic TxFIFO empty - mask. */ -#define GINTMSK_RXFLVLM (1U<<4) /**< Receive FIFO non-empty - mask. */ -#define GINTMSK_SOFM (1U<<3) /**< Start of (micro)frame mask.*/ -#define GINTMSK_OTGM (1U<<2) /**< OTG interrupt mask. */ -#define GINTMSK_MMISM (1U<<1) /**< Mode Mismatch interrupt - mask. */ -/** @} */ - -/** - * @name GRXSTSR register bit definitions - * @{ - */ -#define GRXSTSR_PKTSTS_MASK (15U<<17) /**< Packet status mask. */ -#define GRXSTSR_PKTSTS(n) ((n)<<17) /**< Packet status value. */ -#define GRXSTSR_OUT_GLOBAL_NAK GRXSTSR_PKTSTS(1) -#define GRXSTSR_OUT_DATA GRXSTSR_PKTSTS(2) -#define GRXSTSR_OUT_COMP GRXSTSR_PKTSTS(3) -#define GRXSTSR_SETUP_COMP GRXSTSR_PKTSTS(4) -#define GRXSTSR_SETUP_DATA GRXSTSR_PKTSTS(6) -#define GRXSTSR_DPID_MASK (3U<<15) /**< Data PID mask. */ -#define GRXSTSR_DPID(n) ((n)<<15) /**< Data PID value. */ -#define GRXSTSR_BCNT_MASK (0x7FF<<4) /**< Byte count mask. */ -#define GRXSTSR_BCNT(n) ((n)<<4) /**< Byte count value. */ -#define GRXSTSR_CHNUM_MASK (15U<<0) /**< Channel number mask. */ -#define GRXSTSR_CHNUM(n) ((n)<<0) /**< Channel number value. */ -#define GRXSTSR_EPNUM_MASK (15U<<0) /**< Endpoint number mask. */ -#define GRXSTSR_EPNUM(n) ((n)<<0) /**< Endpoint number value. */ -/** @} */ - -/** - * @name GRXSTSP register bit definitions - * @{ - */ -#define GRXSTSP_PKTSTS_MASK (15<<17) /**< Packet status mask. */ -#define GRXSTSP_PKTSTS(n) ((n)<<17) /**< Packet status value. */ -#define GRXSTSP_OUT_GLOBAL_NAK GRXSTSP_PKTSTS(1) -#define GRXSTSP_OUT_DATA GRXSTSP_PKTSTS(2) -#define GRXSTSP_OUT_COMP GRXSTSP_PKTSTS(3) -#define GRXSTSP_SETUP_COMP GRXSTSP_PKTSTS(4) -#define GRXSTSP_SETUP_DATA GRXSTSP_PKTSTS(6) -#define GRXSTSP_DPID_MASK (3U<<15) /**< Data PID mask. */ -#define GRXSTSP_DPID(n) ((n)<<15) /**< Data PID value. */ -#define GRXSTSP_BCNT_MASK (0x7FF<<4) /**< Byte count mask. */ -#define GRXSTSP_BCNT_OFF 4 /**< Byte count offset. */ -#define GRXSTSP_BCNT(n) ((n)<<4) /**< Byte count value. */ -#define GRXSTSP_CHNUM_MASK (15U<<0) /**< Channel number mask. */ -#define GRXSTSP_CHNUM(n) ((n)<<0) /**< Channel number value. */ -#define GRXSTSP_EPNUM_MASK (15U<<0) /**< Endpoint number mask. */ -#define GRXSTSP_EPNUM_OFF 0 /**< Endpoint number offset. */ -#define GRXSTSP_EPNUM(n) ((n)<<0) /**< Endpoint number value. */ -/** @} */ - -/** - * @name GRXFSIZ register bit definitions - * @{ - */ -#define GRXFSIZ_RXFD_MASK (0xFFFF<<0) /**< RxFIFO depth mask. */ -#define GRXFSIZ_RXFD(n) ((n)<<0) /**< RxFIFO depth value. */ -/** @} */ - -/** - * @name DIEPTXFx register bit definitions - * @{ - */ -#define DIEPTXF_INEPTXFD_MASK (0xFFFFU<<16)/**< IN endpoint TxFIFO depth - mask. */ -#define DIEPTXF_INEPTXFD(n) ((n)<<16) /**< IN endpoint TxFIFO depth - value. */ -#define DIEPTXF_INEPTXSA_MASK (0xFFFF<<0) /**< IN endpoint FIFOx transmit - RAM start address mask. */ -#define DIEPTXF_INEPTXSA(n) ((n)<<0) /**< IN endpoint FIFOx transmit - RAM start address value. */ -/** @} */ - -/** - * @name GCCFG register bit definitions - * @{ - */ -#define GCCFG_NOVBUSSENS (1U<<21) /**< VBUS sensing disable. */ -#define GCCFG_SOFOUTEN (1U<<20) /**< SOF output enable. */ -#define GCCFG_VBUSBSEN (1U<<19) /**< Enable the VBUS sensing "B" - device. */ -#define GCCFG_VBUSASEN (1U<<18) /**< Enable the VBUS sensing "A" - device. */ -#define GCCFG_PWRDWN (1U<<16) /**< Power down. */ -/** @} */ - -/** - * @name HPTXFSIZ register bit definitions - * @{ - */ -#define HPTXFSIZ_PTXFD_MASK (0xFFFFU<<16)/**< Host periodic TxFIFO - depth mask. */ -#define HPTXFSIZ_PTXFD(n) ((n)<<16) /**< Host periodic TxFIFO - depth value. */ -#define HPTXFSIZ_PTXSA_MASK (0xFFFFU<<0)/**< Host periodic TxFIFO - Start address mask. */ -#define HPTXFSIZ_PTXSA(n) ((n)<<0) /**< Host periodic TxFIFO - start address value. */ -/** @} */ - -/** - * @name HCFG register bit definitions - * @{ - */ -#define HCFG_FSLSS (1U<<2) /**< FS- and LS-only support. */ -#define HCFG_FSLSPCS_MASK (3U<<0) /**< FS/LS PHY clock select - mask. */ -#define HCFG_FSLSPCS_48 (1U<<0) /**< PHY clock is running at - 48 MHz. */ -#define HCFG_FSLSPCS_6 (2U<<0) /**< PHY clock is running at - 6 MHz. */ -/** @} */ - -/** - * @name HFIR register bit definitions - * @{ - */ -#define HFIR_FRIVL_MASK (0xFFFFU<<0)/**< Frame interval mask. */ -#define HFIR_FRIVL(n) ((n)<<0) /**< Frame interval value. */ -/** @} */ - -/** - * @name HFNUM register bit definitions - * @{ - */ -#define HFNUM_FTREM_MASK (0xFFFFU<<16)/**< Frame time Remaining mask.*/ -#define HFNUM_FTREM(n) ((n)<<16) /**< Frame time Remaining value.*/ -#define HFNUM_FRNUM_MASK (0xFFFFU<<0)/**< Frame number mask. */ -#define HFNUM_FRNUM(n) ((n)<<0) /**< Frame number value. */ -/** @} */ - -/** - * @name HPTXSTS register bit definitions - * @{ - */ -#define HPTXSTS_PTXQTOP_MASK (0xFFU<<24) /**< Top of the periodic - transmit request queue - mask. */ -#define HPTXSTS_PTXQTOP(n) ((n)<<24) /**< Top of the periodic - transmit request queue - value. */ -#define HPTXSTS_PTXQSAV_MASK (0xFF<<16) /**< Periodic transmit request - queue Space Available - mask. */ -#define HPTXSTS_PTXQSAV(n) ((n)<<16) /**< Periodic transmit request - queue Space Available - value. */ -#define HPTXSTS_PTXFSAVL_MASK (0xFFFF<<0) /**< Periodic transmit Data - FIFO Space Available - mask. */ -#define HPTXSTS_PTXFSAVL(n) ((n)<<0) /**< Periodic transmit Data - FIFO Space Available - value. */ -/** @} */ - -/** - * @name HAINT register bit definitions - * @{ - */ -#define HAINT_HAINT_MASK (0xFFFFU<<0)/**< Channel interrupts mask. */ -#define HAINT_HAINT(n) ((n)<<0) /**< Channel interrupts value. */ -/** @} */ - -/** - * @name HAINTMSK register bit definitions - * @{ - */ -#define HAINTMSK_HAINTM_MASK (0xFFFFU<<0)/**< Channel interrupt mask - mask. */ -#define HAINTMSK_HAINTM(n) ((n)<<0) /**< Channel interrupt mask - value. */ -/** @} */ - -/** - * @name HPRT register bit definitions - * @{ - */ -#define HPRT_PSPD_MASK (3U<<17) /**< Port speed mask. */ -#define HPRT_PSPD_FS (1U<<17) /**< Full speed value. */ -#define HPRT_PSPD_LS (2U<<17) /**< Low speed value. */ -#define HPRT_PTCTL_MASK (15<<13) /**< Port Test control mask. */ -#define HPRT_PTCTL(n) ((n)<<13) /**< Port Test control value. */ -#define HPRT_PPWR (1U<<12) /**< Port power. */ -#define HPRT_PLSTS_MASK (3U<<11) /**< Port Line status mask. */ -#define HPRT_PLSTS_DM (1U<<11) /**< Logic level of D-. */ -#define HPRT_PLSTS_DP (1U<<10) /**< Logic level of D+. */ -#define HPRT_PRST (1U<<8) /**< Port reset. */ -#define HPRT_PSUSP (1U<<7) /**< Port suspend. */ -#define HPRT_PRES (1U<<6) /**< Port Resume. */ -#define HPRT_POCCHNG (1U<<5) /**< Port overcurrent change. */ -#define HPRT_POCA (1U<<4) /**< Port overcurrent active. */ -#define HPRT_PENCHNG (1U<<3) /**< Port enable/disable change.*/ -#define HPRT_PENA (1U<<2) /**< Port enable. */ -#define HPRT_PCDET (1U<<1) /**< Port Connect detected. */ -#define HPRT_PCSTS (1U<<0) /**< Port connect status. */ -/** @} */ - -/** - * @name HCCHAR register bit definitions - * @{ - */ -#define HCCHAR_CHENA (1U<<31) /**< Channel enable. */ -#define HCCHAR_CHDIS (1U<<30) /**< Channel Disable. */ -#define HCCHAR_ODDFRM (1U<<29) /**< Odd frame. */ -#define HCCHAR_DAD_MASK (0x7FU<<22) /**< Device Address mask. */ -#define HCCHAR_DAD(n) ((n)<<22) /**< Device Address value. */ -#define HCCHAR_MCNT_MASK (3U<<20) /**< Multicount mask. */ -#define HCCHAR_MCNT(n) ((n)<<20) /**< Multicount value. */ -#define HCCHAR_EPTYP_MASK (3U<<18) /**< Endpoint type mask. */ -#define HCCHAR_EPTYP(n) ((n)<<18) /**< Endpoint type value. */ -#define HCCHAR_EPTYP_CTL (0U<<18) /**< Control endpoint value. */ -#define HCCHAR_EPTYP_ISO (1U<<18) /**< Isochronous endpoint value.*/ -#define HCCHAR_EPTYP_BULK (2U<<18) /**< Bulk endpoint value. */ -#define HCCHAR_EPTYP_INTR (3U<<18) /**< Interrupt endpoint value. */ -#define HCCHAR_LSDEV (1U<<17) /**< Low-Speed device. */ -#define HCCHAR_EPDIR (1U<<15) /**< Endpoint direction. */ -#define HCCHAR_EPNUM_MASK (15U<<11) /**< Endpoint number mask. */ -#define HCCHAR_EPNUM(n) ((n)<<11) /**< Endpoint number value. */ -#define HCCHAR_MPS_MASK (0x7FFU<<0) /**< Maximum packet size mask. */ -#define HCCHAR_MPS(n) ((n)<<0) /**< Maximum packet size value. */ -/** @} */ - -/** - * @name HCINT register bit definitions - * @{ - */ -#define HCINT_DTERR (1U<<10) /**< Data toggle error. */ -#define HCINT_FRMOR (1U<<9) /**< Frame overrun. */ -#define HCINT_BBERR (1U<<8) /**< Babble error. */ -#define HCINT_TRERR (1U<<7) /**< Transaction Error. */ -#define HCINT_ACK (1U<<5) /**< ACK response - received/transmitted - interrupt. */ -#define HCINT_NAK (1U<<4) /**< NAK response received - interrupt. */ -#define HCINT_STALL (1U<<3) /**< STALL response received - interrupt. */ -#define HCINT_CHH (1U<<1) /**< Channel halted. */ -#define HCINT_XFRC (1U<<0) /**< Transfer completed. */ -/** @} */ - -/** - * @name HCINTMSK register bit definitions - * @{ - */ -#define HCINTMSK_DTERRM (1U<<10) /**< Data toggle error mask. */ -#define HCINTMSK_FRMORM (1U<<9) /**< Frame overrun mask. */ -#define HCINTMSK_BBERRM (1U<<8) /**< Babble error mask. */ -#define HCINTMSK_TRERRM (1U<<7) /**< Transaction error mask. */ -#define HCINTMSK_NYET (1U<<6) /**< NYET response received - interrupt mask. */ -#define HCINTMSK_ACKM (1U<<5) /**< ACK Response - received/transmitted - interrupt mask. */ -#define HCINTMSK_NAKM (1U<<4) /**< NAK response received - interrupt mask. */ -#define HCINTMSK_STALLM (1U<<3) /**< STALL response received - interrupt mask. */ -#define HCINTMSK_AHBERRM (1U<<2) -#define HCINTMSK_CHHM (1U<<1) /**< Channel halted mask. */ -#define HCINTMSK_XFRCM (1U<<0) /**< Transfer completed mask. */ -/** @} */ - -/** - * @name HCTSIZ register bit definitions - * @{ - */ -#define HCTSIZ_DPID_MASK (3U<<29) /**< PID mask. */ -#define HCTSIZ_DPID_DATA0 (0U<<29) /**< DATA0. */ -#define HCTSIZ_DPID_DATA2 (1U<<29) /**< DATA2. */ -#define HCTSIZ_DPID_DATA1 (2U<<29) /**< DATA1. */ -#define HCTSIZ_DPID_MDATA (3U<<29) /**< MDATA. */ -#define HCTSIZ_DPID_SETUP (3U<<29) /**< SETUP. */ -#define HCTSIZ_PKTCNT_MASK (0x3FFU<<19)/**< Packet count mask. */ -#define HCTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */ -#define HCTSIZ_XFRSIZ_MASK (0x7FFFF<<0)/**< Transfer size mask. */ -#define HCTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */ -/** @} */ - -/** - * @name DCFG register bit definitions - * @{ - */ -#define DCFG_PFIVL_MASK (3U<<11) /**< Periodic frame interval - mask. */ -#define DCFG_PFIVL(n) ((n)<<11) /**< Periodic frame interval - value. */ -#define DCFG_DAD_MASK (0x7FU<<4) /**< Device address mask. */ -#define DCFG_DAD(n) ((n)<<4) /**< Device address value. */ -#define DCFG_NZLSOHSK (1U<<2) /**< Non-Zero-Length status - OUT handshake. */ -#define DCFG_DSPD_MASK (3U<<0) /**< Device speed mask. */ -#define DCFG_DSPD_HS (0U<<0) /**< High speed (USB 2.0). */ -#define DCFG_DSPD_HS_FS (1U<<0) /**< High speed (USB 2.0) in FS - mode. */ -#define DCFG_DSPD_FS11 (3U<<0) /**< Full speed (USB 1.1 - transceiver clock is 48 - MHz). */ -/** @} */ - -/** - * @name DCTL register bit definitions - * @{ - */ -#define DCTL_POPRGDNE (1U<<11) /**< Power-on programming done. */ -#define DCTL_CGONAK (1U<<10) /**< Clear global OUT NAK. */ -#define DCTL_SGONAK (1U<<9) /**< Set global OUT NAK. */ -#define DCTL_CGINAK (1U<<8) /**< Clear global non-periodic - IN NAK. */ -#define DCTL_SGINAK (1U<<7) /**< Set global non-periodic - IN NAK. */ -#define DCTL_TCTL_MASK (7U<<4) /**< Test control mask. */ -#define DCTL_TCTL(n) ((n)<<4 /**< Test control value. */ -#define DCTL_GONSTS (1U<<3) /**< Global OUT NAK status. */ -#define DCTL_GINSTS (1U<<2) /**< Global non-periodic IN - NAK status. */ -#define DCTL_SDIS (1U<<1) /**< Soft disconnect. */ -#define DCTL_RWUSIG (1U<<0) /**< Remote wakeup signaling. */ -/** @} */ - -/** - * @name DSTS register bit definitions - * @{ - */ -#define DSTS_FNSOF_MASK (0x3FFU<<8) /**< Frame number of the received - SOF mask. */ -#define DSTS_FNSOF(n) ((n)<<8) /**< Frame number of the received - SOF value. */ -#define DSTS_FNSOF_ODD (1U<<8) /**< Frame parity of the received - SOF value. */ -#define DSTS_EERR (1U<<3) /**< Erratic error. */ -#define DSTS_ENUMSPD_MASK (3U<<1) /**< Enumerated speed mask. */ -#define DSTS_ENUMSPD_FS_48 (3U<<1) /**< Full speed (PHY clock is - running at 48 MHz). */ -#define DSTS_ENUMSPD_HS_480 (0U<<1) /**< High speed. */ -#define DSTS_SUSPSTS (1U<<0) /**< Suspend status. */ -/** @} */ - -/** - * @name DIEPMSK register bit definitions - * @{ - */ -#define DIEPMSK_TXFEM (1U<<6) /**< Transmit FIFO empty mask. */ -#define DIEPMSK_INEPNEM (1U<<6) /**< IN endpoint NAK effective - mask. */ -#define DIEPMSK_ITTXFEMSK (1U<<4) /**< IN token received when - TxFIFO empty mask. */ -#define DIEPMSK_TOCM (1U<<3) /**< Timeout condition mask. */ -#define DIEPMSK_EPDM (1U<<1) /**< Endpoint disabled - interrupt mask. */ -#define DIEPMSK_XFRCM (1U<<0) /**< Transfer completed - interrupt mask. */ -/** @} */ - -/** - * @name DOEPMSK register bit definitions - * @{ - */ -#define DOEPMSK_OTEPDM (1U<<4) /**< OUT token received when - endpoint disabled mask. */ -#define DOEPMSK_STUPM (1U<<3) /**< SETUP phase done mask. */ -#define DOEPMSK_EPDM (1U<<1) /**< Endpoint disabled - interrupt mask. */ -#define DOEPMSK_XFRCM (1U<<0) /**< Transfer completed - interrupt mask. */ -/** @} */ - -/** - * @name DAINT register bit definitions - * @{ - */ -#define DAINT_OEPINT_MASK (0xFFFFU<<16)/**< OUT endpoint interrupt - bits mask. */ -#define DAINT_OEPINT(n) ((n)<<16) /**< OUT endpoint interrupt - bits value. */ -#define DAINT_IEPINT_MASK (0xFFFFU<<0)/**< IN endpoint interrupt - bits mask. */ -#define DAINT_IEPINT(n) ((n)<<0) /**< IN endpoint interrupt - bits value. */ -/** @} */ - -/** - * @name DAINTMSK register bit definitions - * @{ - */ -#define DAINTMSK_OEPM_MASK (0xFFFFU<<16)/**< OUT EP interrupt mask - bits mask. */ -#define DAINTMSK_OEPM(n) (1U<<(16+(n)))/**< OUT EP interrupt mask - bits value. */ -#define DAINTMSK_IEPM_MASK (0xFFFFU<<0)/**< IN EP interrupt mask - bits mask. */ -#define DAINTMSK_IEPM(n) (1U<<(n)) /**< IN EP interrupt mask - bits value. */ -/** @} */ - -/** - * @name DVBUSDIS register bit definitions - * @{ - */ -#define DVBUSDIS_VBUSDT_MASK (0xFFFFU<<0)/**< Device VBUS discharge - time mask. */ -#define DVBUSDIS_VBUSDT(n) ((n)<<0) /**< Device VBUS discharge - time value. */ -/** @} */ - -/** - * @name DVBUSPULSE register bit definitions - * @{ - */ -#define DVBUSPULSE_DVBUSP_MASK (0xFFFU<<0) /**< Device VBUSpulsing time - mask. */ -#define DVBUSPULSE_DVBUSP(n) ((n)<<0) /**< Device VBUS pulsing time - value. */ -/** @} */ - -/** - * @name DIEPEMPMSK register bit definitions - * @{ - */ -#define DIEPEMPMSK_INEPTXFEM(n) (1U<<(n)) /**< IN EP Tx FIFO empty - interrupt mask bit. */ -/** @} */ - -/** - * @name DIEPCTL register bit definitions - * @{ - */ -#define DIEPCTL_EPENA (1U<<31) /**< Endpoint enable. */ -#define DIEPCTL_EPDIS (1U<<30) /**< Endpoint disable. */ -#define DIEPCTL_SD1PID (1U<<29) /**< Set DATA1 PID. */ -#define DIEPCTL_SODDFRM (1U<<29) /**< Set odd frame. */ -#define DIEPCTL_SD0PID (1U<<28) /**< Set DATA0 PID. */ -#define DIEPCTL_SEVNFRM (1U<<28) /**< Set even frame. */ -#define DIEPCTL_SNAK (1U<<27) /**< Set NAK. */ -#define DIEPCTL_CNAK (1U<<26) /**< Clear NAK. */ -#define DIEPCTL_TXFNUM_MASK (15U<<22) /**< TxFIFO number mask. */ -#define DIEPCTL_TXFNUM(n) ((n)<<22) /**< TxFIFO number value. */ -#define DIEPCTL_STALL (1U<<21) /**< STALL handshake. */ -#define DIEPCTL_SNPM (1U<<20) /**< Snoop mode. */ -#define DIEPCTL_EPTYP_MASK (3<<18) /**< Endpoint type mask. */ -#define DIEPCTL_EPTYP_CTRL (0U<<18) /**< Control. */ -#define DIEPCTL_EPTYP_ISO (1U<<18) /**< Isochronous. */ -#define DIEPCTL_EPTYP_BULK (2U<<18) /**< Bulk. */ -#define DIEPCTL_EPTYP_INTR (3U<<18) /**< Interrupt. */ -#define DIEPCTL_NAKSTS (1U<<17) /**< NAK status. */ -#define DIEPCTL_EONUM (1U<<16) /**< Even/odd frame. */ -#define DIEPCTL_DPID (1U<<16) /**< Endpoint data PID. */ -#define DIEPCTL_USBAEP (1U<<15) /**< USB active endpoint. */ -#define DIEPCTL_MPSIZ_MASK (0x3FFU<<0) /**< Maximum Packet size mask. */ -#define DIEPCTL_MPSIZ(n) ((n)<<0) /**< Maximum Packet size value. */ -/** @} */ - -/** - * @name DIEPINT register bit definitions - * @{ - */ -#define DIEPINT_TXFE (1U<<7) /**< Transmit FIFO empty. */ -#define DIEPINT_INEPNE (1U<<6) /**< IN endpoint NAK effective. */ -#define DIEPINT_ITTXFE (1U<<4) /**< IN Token received when - TxFIFO is empty. */ -#define DIEPINT_TOC (1U<<3) /**< Timeout condition. */ -#define DIEPINT_EPDISD (1U<<1) /**< Endpoint disabled - interrupt. */ -#define DIEPINT_XFRC (1U<<0) /**< Transfer completed. */ -/** @} */ - -/** - * @name DIEPTSIZ register bit definitions - * @{ - */ -#define DIEPTSIZ_MCNT_MASK (3U<<29) /**< Multi count mask. */ -#define DIEPTSIZ_MCNT(n) ((n)<<29) /**< Multi count value. */ -#define DIEPTSIZ_PKTCNT_MASK (0x3FF<<19) /**< Packet count mask. */ -#define DIEPTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */ -#define DIEPTSIZ_XFRSIZ_MASK (0x7FFFFU<<0)/**< Transfer size mask. */ -#define DIEPTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */ -/** @} */ - -/** - * @name DTXFSTS register bit definitions. - * @{ - */ -#define DTXFSTS_INEPTFSAV_MASK (0xFFFF<<0) /**< IN endpoint TxFIFO space - available. */ -/** @} */ - -/** - * @name DOEPCTL register bit definitions. - * @{ - */ -#define DOEPCTL_EPENA (1U<<31) /**< Endpoint enable. */ -#define DOEPCTL_EPDIS (1U<<30) /**< Endpoint disable. */ -#define DOEPCTL_SD1PID (1U<<29) /**< Set DATA1 PID. */ -#define DOEPCTL_SODDFRM (1U<<29) /**< Set odd frame. */ -#define DOEPCTL_SD0PID (1U<<28) /**< Set DATA0 PID. */ -#define DOEPCTL_SEVNFRM (1U<<28) /**< Set even frame. */ -#define DOEPCTL_SNAK (1U<<27) /**< Set NAK. */ -#define DOEPCTL_CNAK (1U<<26) /**< Clear NAK. */ -#define DOEPCTL_STALL (1U<<21) /**< STALL handshake. */ -#define DOEPCTL_SNPM (1U<<20) /**< Snoop mode. */ -#define DOEPCTL_EPTYP_MASK (3U<<18) /**< Endpoint type mask. */ -#define DOEPCTL_EPTYP_CTRL (0U<<18) /**< Control. */ -#define DOEPCTL_EPTYP_ISO (1U<<18) /**< Isochronous. */ -#define DOEPCTL_EPTYP_BULK (2U<<18) /**< Bulk. */ -#define DOEPCTL_EPTYP_INTR (3U<<18) /**< Interrupt. */ -#define DOEPCTL_NAKSTS (1U<<17) /**< NAK status. */ -#define DOEPCTL_EONUM (1U<<16) /**< Even/odd frame. */ -#define DOEPCTL_DPID (1U<<16) /**< Endpoint data PID. */ -#define DOEPCTL_USBAEP (1U<<15) /**< USB active endpoint. */ -#define DOEPCTL_MPSIZ_MASK (0x3FFU<<0) /**< Maximum Packet size mask. */ -#define DOEPCTL_MPSIZ(n) ((n)<<0) /**< Maximum Packet size value. */ -/** @} */ - -/** - * @name DOEPINT register bit definitions - * @{ - */ -#define DOEPINT_B2BSTUP (1U<<6) /**< Back-to-back SETUP packets - received. */ -#define DOEPINT_OTEPDIS (1U<<4) /**< OUT token received when - endpoint disabled. */ -#define DOEPINT_STUP (1U<<3) /**< SETUP phase done. */ -#define DOEPINT_EPDISD (1U<<1) /**< Endpoint disabled - interrupt. */ -#define DOEPINT_XFRC (1U<<0) /**< Transfer completed - interrupt. */ -/** @} */ - -/** - * @name DOEPTSIZ register bit definitions - * @{ - */ -#define DOEPTSIZ_RXDPID_MASK (3U<<29) /**< Received data PID mask. */ -#define DOEPTSIZ_RXDPID(n) ((n)<<29) /**< Received data PID value. */ -#define DOEPTSIZ_STUPCNT_MASK (3U<<29) /**< SETUP packet count mask. */ -#define DOEPTSIZ_STUPCNT(n) ((n)<<29) /**< SETUP packet count value. */ -#define DOEPTSIZ_PKTCNT_MASK (0x3FFU<<19)/**< Packet count mask. */ -#define DOEPTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */ -#define DOEPTSIZ_XFRSIZ_MASK (0x7FFFFU<<0)/**< Transfer size mask. */ -#define DOEPTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */ -/** @} */ - -/** - * @name PCGCCTL register bit definitions - * @{ - */ -#define PCGCCTL_PHYSUSP (1U<<4) /**< PHY Suspended. */ -#define PCGCCTL_GATEHCLK (1U<<1) /**< Gate HCLK. */ -#define PCGCCTL_STPPCLK (1U<<0) /**< Stop PCLK. */ -/** @} */ - -/** - * @brief OTG_FS registers block memory address. - */ -#define OTG_FS_ADDR 0x50000000 - -/** - * @brief OTG_HS registers block memory address. - */ -#define OTG_HS_ADDR 0x40040000 - -/** - * @brief Accesses to the OTG_FS registers block. - */ -#define OTG_FS ((stm32_otg_t *)OTG_FS_ADDR) - -/** - * @brief Accesses to the OTG_HS registers block. - */ -#define OTG_HS ((stm32_otg_t *)OTG_HS_ADDR) - -#endif /* _STM32_OTG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c deleted file mode 100644 index 3abab1c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c +++ /dev/null @@ -1,1604 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_USBH -#include "usbh/internal.h" -#include - -#if USBH_LLD_DEBUG_ENABLE_TRACE -#define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define udbgf(f, ...) do {} while(0) -#define udbg(f, ...) do {} while(0) -#endif - -#if USBH_LLD_DEBUG_ENABLE_INFO -#define uinfof(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uinfo(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uinfof(f, ...) do {} while(0) -#define uinfo(f, ...) do {} while(0) -#endif - -#if USBH_LLD_DEBUG_ENABLE_WARNINGS -#define uwarnf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uwarn(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uwarnf(f, ...) do {} while(0) -#define uwarn(f, ...) do {} while(0) -#endif - -#if USBH_LLD_DEBUG_ENABLE_ERRORS -#define uerrf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uerr(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uerrf(f, ...) do {} while(0) -#define uerr(f, ...) do {} while(0) -#endif - -static void _transfer_completedI(usbh_ep_t *ep, usbh_urb_t *urb, usbh_urbstatus_t status); -static void _try_commit_np(USBHDriver *host); -static void otg_rxfifo_flush(USBHDriver *usbp); -static void otg_txfifo_flush(USBHDriver *usbp, uint32_t fifo); - -/*===========================================================================*/ -/* Little helper functions. */ -/*===========================================================================*/ -static inline void _move_to_pending_queue(usbh_ep_t *ep) { - list_move_tail(&ep->node, ep->pending_list); -} - -static inline usbh_urb_t *_active_urb(usbh_ep_t *ep) { - return list_first_entry(&ep->urb_list, usbh_urb_t, node); -} - -static inline void _save_dt_mask(usbh_ep_t *ep, uint32_t hctsiz) { - ep->dt_mask = hctsiz & HCTSIZ_DPID_MASK; -} - -#if 1 -#define _transfer_completed _transfer_completedI -#else -static inline void _transfer_completed(usbh_ep_t *ep, usbh_urb_t *urb, usbh_urbstatus_t status) { - osalSysLockFromISR(); - _transfer_completedI(ep, urb, status); - osalSysUnlockFromISR(); -} -#endif - -/*===========================================================================*/ -/* Functions called from many places. */ -/*===========================================================================*/ -static void _transfer_completedI(usbh_ep_t *ep, usbh_urb_t *urb, usbh_urbstatus_t status) { - osalDbgCheckClassI(); - - urb->queued = FALSE; - - /* remove URB from EP's queue */ - list_del_init(&urb->node); - - /* Call the callback function now, so that if it calls usbhURBSubmitI, - * the list_empty check below will be false. Also, note that the - * if (list_empty(&ep->node)) { - * ... - * } - * in usbh_lld_urb_submit will be false, since the endpoint is - * still in the active queue. - */ - _usbh_urb_completeI(urb, status); - - if (list_empty(&ep->urb_list)) { - /* no more URBs to process in this EP, remove EP from the host's queue */ - list_del_init(&ep->node); - } else { - /* more URBs to process */ - _move_to_pending_queue(ep); - } -} - -static void _halt_channel(USBHDriver *host, stm32_hc_management_t *hcm, usbh_lld_halt_reason_t reason) { - (void)host; - - if (hcm->halt_reason != USBH_LLD_HALTREASON_NONE) { - uwarnf("\t%s: Repeated halt (original=%d, new=%d)", hcm->ep->name, hcm->halt_reason, reason); - return; - } - -#if CH_DBG_ENABLE_CHECKS - if (usbhEPIsPeriodic(hcm->ep)) { - osalDbgCheck(host->otg->HPTXSTS & HPTXSTS_PTXQSAV_MASK); - } else { - osalDbgCheck(host->otg->HNPTXSTS & HPTXSTS_PTXQSAV_MASK); - } -#endif - - hcm->halt_reason = reason; - hcm->hc->HCCHAR |= HCCHAR_CHENA | HCCHAR_CHDIS; -} - -static void _release_channel(USBHDriver *host, stm32_hc_management_t *hcm) { -// static const char *reason[] = {"XFRC", "XFRC", "NAK", "STALL", "ERROR", "ABORT"}; -// udbgf("\t%s: release (%s)", hcm->ep->name, reason[hcm->halt_reason]); - hcm->hc->HCINTMSK = 0; - host->otg->HAINTMSK &= ~hcm->haintmsk; - hcm->halt_reason = USBH_LLD_HALTREASON_NONE; - if (usbhEPIsPeriodic(hcm->ep)) { - list_add(&hcm->node, &host->ch_free[0]); - } else { - list_add(&hcm->node, &host->ch_free[1]); - } - hcm->ep->xfer.hcm = 0; - hcm->ep = 0; -} - -static bool _activate_ep(USBHDriver *host, usbh_ep_t *ep) { - struct list_head *list; - uint16_t spc; - - osalDbgCheck(ep->xfer.hcm == NULL); - - if (usbhEPIsPeriodic(ep)) { - list = &host->ch_free[0]; - spc = (host->otg->HPTXSTS >> 16) & 0xff; - } else { - list = &host->ch_free[1]; - spc = (host->otg->HNPTXSTS >> 16) & 0xff; - } - - if (list_empty(list)) { - uwarnf("\t%s: No free %s channels", ep->name, usbhEPIsPeriodic(ep) ? "P" : "NP"); - return FALSE; - } - - if (spc <= STM32_USBH_MIN_QSPACE) { - uwarnf("\t%s: No space in %s Queue (spc=%d)", ep->name, usbhEPIsPeriodic(ep) ? "P" : "NP", spc); - return FALSE; - } - - /* get the first channel */ - stm32_hc_management_t *hcm = list_first_entry(list, stm32_hc_management_t, node); - osalDbgCheck((hcm->halt_reason == USBH_LLD_HALTREASON_NONE) && (hcm->ep == NULL)); - - usbh_urb_t *const urb = _active_urb(ep); - uint32_t hcintmsk = ep->hcintmsk; - uint32_t hcchar = ep->hcchar; - uint16_t mps = ep->wMaxPacketSize; - - uint32_t xfer_packets; - uint32_t xfer_len = 0; //Initialize just to shut up a compiler warning - - osalDbgCheck(urb->status == USBH_URBSTATUS_PENDING); - - /* check if the URB is a new one, or we must continue a previously started URB */ - if (urb->queued == FALSE) { - /* prepare EP for a new URB */ - if (ep->type == USBH_EPTYPE_CTRL) { - xfer_len = 8; - ep->xfer.buf = (uint8_t *)urb->setup_buff; - ep->dt_mask = HCTSIZ_DPID_SETUP; - ep->in = FALSE; - ep->xfer.u.ctrl_phase = USBH_LLD_CTRLPHASE_SETUP; - } else { - xfer_len = urb->requestedLength; - ep->xfer.buf = urb->buff; - } - ep->xfer.error_count = 0; - //urb->status = USBH_URBSTATUS_QUEUED; - } else { - osalDbgCheck(urb->requestedLength >= urb->actualLength); - - if (ep->type == USBH_EPTYPE_CTRL) { - switch (ep->xfer.u.ctrl_phase) { - case USBH_LLD_CTRLPHASE_SETUP: - xfer_len = 8; - ep->xfer.buf = (uint8_t *)urb->setup_buff; - ep->dt_mask = HCTSIZ_DPID_SETUP; - break; - case USBH_LLD_CTRLPHASE_DATA: - xfer_len = urb->requestedLength - urb->actualLength; - ep->xfer.buf = (uint8_t *) urb->buff + urb->actualLength; - break; - case USBH_LLD_CTRLPHASE_STATUS: - xfer_len = 0; - ep->dt_mask = HCTSIZ_DPID_DATA1; - ep->xfer.error_count = 0; - break; - default: - osalDbgCheck(0); - } - if (ep->in) { - hcintmsk |= HCINTMSK_DTERRM | HCINTMSK_BBERRM; - hcchar |= HCCHAR_EPDIR; - } - } else { - xfer_len = urb->requestedLength - urb->actualLength; - ep->xfer.buf = (uint8_t *) urb->buff + urb->actualLength; - } - - if (ep->xfer.error_count) - hcintmsk |= HCINTMSK_ACKM; - - } - ep->xfer.partial = 0; - - if (ep->type == USBH_EPTYPE_ISO) { - ep->dt_mask = HCTSIZ_DPID_DATA0; - - /* [USB 2.0 spec, 5.6.4]: A host must not issue more than 1 - * transaction in a (micro)frame for an isochronous endpoint - * unless the endpoint is high-speed, high-bandwidth. - */ - if (xfer_len > mps) - xfer_len = mps; - } else if (xfer_len > 0x7FFFF) { - xfer_len = 0x7FFFF - mps + 1; - } - - /* calculate required packets */ - if (xfer_len) { - xfer_packets = (xfer_len + mps - 1) / mps; - - if (xfer_packets > 0x3FF) { - xfer_packets = 0x3FF; - xfer_len = xfer_packets * mps; - } - } else { - xfer_packets = 1; /* Need 1 packet for transfer length of 0 */ - } - - if (ep->in) - xfer_len = xfer_packets * mps; - - /* Clear old interrupt conditions, - * configure transfer size, - * enable required interrupts */ - stm32_otg_host_chn_t *const hc = hcm->hc; - hc->HCINT = 0xffffffff; - hc->HCTSIZ = ep->dt_mask - | HCTSIZ_PKTCNT(xfer_packets) - | HCTSIZ_XFRSIZ(xfer_len); - hc->HCINTMSK = hcintmsk; - - /* Queue the transfer for the next frame (no effect for non-periodic transfers) */ - if (!(host->otg->HFNUM & 1)) - hcchar |= HCCHAR_ODDFRM; - - /* configure channel characteristics and queue a request */ - hc->HCCHAR = hcchar; - if (ep->in && (xfer_packets > 1)) { - /* For IN transfers, try to queue two back-to-back packets. - * This results in a 1% performance gain for Full Speed transfers - */ - if (--spc > STM32_USBH_MIN_QSPACE) { - hc->HCCHAR |= HCCHAR_CHENA; - } else { - uwarnf("\t%s: Could not queue back-to-back packets", ep->name); - } - } - - if (urb->queued == FALSE) { - urb->queued = TRUE; - udbgf("\t%s: Start (%dB)", ep->name, xfer_len); - } else { - udbgf("\t%s: Restart (%dB)", ep->name, xfer_len); - } - - ep->xfer.len = xfer_len; - ep->xfer.packets = (uint16_t)xfer_packets; - - /* remove the channel from the free list, link endpoint <-> channel and move to the active queue*/ - list_del(&hcm->node); - ep->xfer.hcm = hcm; - hcm->ep = ep; - list_move_tail(&ep->node, ep->active_list); - - - stm32_otg_t *const otg = host->otg; - - /* enable this channel's interrupt and global channel interrupt */ - otg->HAINTMSK |= hcm->haintmsk; - if (ep->in) { - otg->GINTMSK |= GINTMSK_HCM; - } else if (usbhEPIsPeriodic(ep)) { - otg->GINTMSK |= GINTMSK_HCM | GINTMSK_PTXFEM; - } else { - //TODO: write to the FIFO now - otg->GINTMSK |= GINTMSK_HCM | GINTMSK_NPTXFEM; - } - - return TRUE; -} - -static bool _update_urb(usbh_ep_t *ep, uint32_t hctsiz, usbh_urb_t *urb, bool completed) { - uint32_t len; - - if (!completed) { - len = ep->wMaxPacketSize * (ep->xfer.packets - ((hctsiz & HCTSIZ_PKTCNT_MASK) >> 19)); - } else { - if (ep->in) { - len = ep->xfer.len - ((hctsiz & HCTSIZ_XFRSIZ_MASK) >> 0); - } else { - len = ep->xfer.len; - } - osalDbgCheck(len == ep->xfer.partial); //TODO: if len == ep->xfer.partial, use this instead of the above code - } - -#if 1 - osalDbgAssert(urb->actualLength + len <= urb->requestedLength, "what happened?"); -#else - if (urb->actualLength + len > urb->requestedLength) { - uerrf("\t%s: Trimming actualLength %u -> %u", ep->name, urb->actualLength + len, urb->requestedLength); - urb->actualLength = urb->requestedLength; - return TRUE; - } -#endif - - urb->actualLength += len; - if ((urb->actualLength == urb->requestedLength) - || (ep->in && completed && (hctsiz & HCTSIZ_XFRSIZ_MASK))) - return TRUE; - - return FALSE; -} - -static void _try_commit_np(USBHDriver *host) { - usbh_ep_t *item, *tmp; - - list_for_each_entry_safe(item, usbh_ep_t, tmp, &host->ep_pending_lists[USBH_EPTYPE_CTRL], node) { - if (!_activate_ep(host, item)) - return; - } - - list_for_each_entry_safe(item, usbh_ep_t, tmp, &host->ep_pending_lists[USBH_EPTYPE_BULK], node) { - if (!_activate_ep(host, item)) - return; - } -} - -static void _try_commit_p(USBHDriver *host, bool sof) { - usbh_ep_t *item, *tmp; - - list_for_each_entry_safe(item, usbh_ep_t, tmp, &host->ep_pending_lists[USBH_EPTYPE_ISO], node) { - if (!_activate_ep(host, item)) - return; - } - - list_for_each_entry_safe(item, usbh_ep_t, tmp, &host->ep_pending_lists[USBH_EPTYPE_INT], node) { - osalDbgCheck(item); - /* TODO: improve this */ - if (sof && item->xfer.u.frame_counter) - --item->xfer.u.frame_counter; - - if (item->xfer.u.frame_counter == 0) { - if (!_activate_ep(host, item)) - return; - item->xfer.u.frame_counter = item->bInterval; - } - } - - if (list_empty(&host->ep_pending_lists[USBH_EPTYPE_ISO]) - && list_empty(&host->ep_pending_lists[USBH_EPTYPE_INT])) { - host->otg->GINTMSK &= ~GINTMSK_SOFM; - } else { - host->otg->GINTMSK |= GINTMSK_SOFM; - } -} - -static void _purge_queue(USBHDriver *host, struct list_head *list) { - usbh_ep_t *ep, *tmp; - list_for_each_entry_safe(ep, usbh_ep_t, tmp, list, node) { - usbh_urb_t *const urb = _active_urb(ep); - stm32_hc_management_t *const hcm = ep->xfer.hcm; - uwarnf("\t%s: Abort URB, USBH_URBSTATUS_DISCONNECTED", ep->name); - if (hcm) { - uwarnf("\t%s: URB had channel %d assigned, halt_reason = %d", ep->name, hcm - host->channels, hcm->halt_reason); - _release_channel(host, hcm); - _update_urb(ep, hcm->hc->HCTSIZ, urb, FALSE); - } - _transfer_completed(ep, urb, USBH_URBSTATUS_DISCONNECTED); - } -} - -static void _purge_active(USBHDriver *host) { - _purge_queue(host, &host->ep_active_lists[0]); - _purge_queue(host, &host->ep_active_lists[1]); - _purge_queue(host, &host->ep_active_lists[2]); - _purge_queue(host, &host->ep_active_lists[3]); -} - -static void _purge_pending(USBHDriver *host) { - _purge_queue(host, &host->ep_pending_lists[0]); - _purge_queue(host, &host->ep_pending_lists[1]); - _purge_queue(host, &host->ep_pending_lists[2]); - _purge_queue(host, &host->ep_pending_lists[3]); -} - -static uint32_t _write_packet(struct list_head *list, uint32_t space_available) { - usbh_ep_t *ep; - - uint32_t remaining = 0; - - list_for_each_entry(ep, usbh_ep_t, list, node) { - if (ep->in || (ep->xfer.hcm->halt_reason != USBH_LLD_HALTREASON_NONE)) - continue; - - int32_t rem = ep->xfer.len - ep->xfer.partial; - osalDbgCheck(rem >= 0); - if (rem <= 0) - continue; - - remaining += rem; - - if (!space_available) { - if (remaining) - break; - - continue; - } - - /* write one packet only */ - if (rem > ep->wMaxPacketSize) - rem = ep->wMaxPacketSize; - - /* round up to dwords */ - uint32_t words = (rem + 3) / 4; - - if (words > space_available) - words = space_available; - - space_available -= words; - - uint32_t written = words * 4; - if ((int32_t)written > rem) - written = rem; - - volatile uint32_t *dest = ep->xfer.hcm->fifo; - uint32_t *src = (uint32_t *)ep->xfer.buf; - udbgf("\t%s: write %d words (%dB), partial=%d", ep->name, words, written, ep->xfer.partial); - while (words--) { - *dest = *src++; - } - - ep->xfer.buf += written; - ep->xfer.partial += written; - - remaining -= written; - } - - return remaining; -} - - -/*===========================================================================*/ -/* API. */ -/*===========================================================================*/ - -void usbh_lld_ep_object_init(usbh_ep_t *ep) { -/* CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) - * STALL si sólo DAT/STAT si si si si no no ep->type != ISO && (ep->type != CTRL || ctrlphase != SETUP) - * ACK si si si si si si no no ep->type != ISO - * NAK si si si si si si no no ep->type != ISO - * BBERR si no si no si no si no ep->in - * TRERR si si si si si si si no ep->type != ISO || ep->in - * DTERR si no si no si no no no ep->type != ISO && ep->in - * FRMOR no no si si no no si si ep->type = PERIODIC - */ - USBHDriver *host = ep->device->host; - uint32_t hcintmsk = HCINTMSK_CHHM | HCINTMSK_XFRCM | HCINTMSK_AHBERRM; - - switch (ep->type) { - case USBH_EPTYPE_ISO: - hcintmsk |= HCINTMSK_FRMORM; - if (ep->in) { - hcintmsk |= HCINTMSK_TRERRM | HCINTMSK_BBERRM; - } - break; - case USBH_EPTYPE_INT: - hcintmsk |= HCINTMSK_TRERRM | HCINTMSK_FRMORM | HCINTMSK_STALLM | HCINTMSK_NAKM; - if (ep->in) { - hcintmsk |= HCINTMSK_DTERRM | HCINTMSK_BBERRM; - } - ep->xfer.u.frame_counter = 1; - break; - case USBH_EPTYPE_CTRL: - hcintmsk |= HCINTMSK_TRERRM | HCINTMSK_STALLM | HCINTMSK_NAKM; - break; - case USBH_EPTYPE_BULK: - hcintmsk |= HCINTMSK_TRERRM | HCINTMSK_STALLM | HCINTMSK_NAKM; - if (ep->in) { - hcintmsk |= HCINTMSK_DTERRM | HCINTMSK_BBERRM; - } - break; - default: - chDbgCheck(0); - } - ep->active_list = &host->ep_active_lists[ep->type]; - ep->pending_list = &host->ep_pending_lists[ep->type]; - INIT_LIST_HEAD(&ep->urb_list); - INIT_LIST_HEAD(&ep->node); - - ep->hcintmsk = hcintmsk; - ep->hcchar = HCCHAR_CHENA - | HCCHAR_DAD(ep->device->address) - | HCCHAR_MCNT(1) - | HCCHAR_EPTYP(ep->type) - | ((ep->device->speed == USBH_DEVSPEED_LOW) ? HCCHAR_LSDEV : 0) - | (ep->in ? HCCHAR_EPDIR : 0) - | HCCHAR_EPNUM(ep->address) - | HCCHAR_MPS(ep->wMaxPacketSize); -} - -void usbh_lld_ep_open(usbh_ep_t *ep) { - uinfof("\t%s: Open EP", ep->name); - ep->status = USBH_EPSTATUS_OPEN; - osalOsRescheduleS(); -} - -void usbh_lld_ep_close(usbh_ep_t *ep) { - usbh_urb_t *urb, *tmp; - uinfof("\t%s: Closing EP...", ep->name); - list_for_each_entry_safe(urb, usbh_urb_t, tmp, &ep->urb_list, node) { - uinfof("\t%s: Abort URB, USBH_URBSTATUS_DISCONNECTED", ep->name); - _usbh_urb_abort_and_waitS(urb, USBH_URBSTATUS_DISCONNECTED); - } - uinfof("\t%s: Closed", ep->name); - ep->status = USBH_EPSTATUS_CLOSED; - osalOsRescheduleS(); -} - -void usbh_lld_urb_submit(usbh_urb_t *urb) { - usbh_ep_t *const ep = urb->ep; - - /* add the URB to the EP's queue */ - list_add_tail(&urb->node, &ep->urb_list); - - /* check if the EP wasn't in any queue (pending nor active) */ - if (list_empty(&ep->node)) { - - /* add the EP to the pending queue */ - _move_to_pending_queue(ep); - - if (usbhEPIsPeriodic(ep)) { - ep->device->host->otg->GINTMSK |= GINTMSK_SOFM; - } else { - /* try to queue non-periodic transfers */ - _try_commit_np(ep->device->host); - } - } -} - -bool usbh_lld_urb_abort(usbh_urb_t *urb, usbh_urbstatus_t status) { - osalDbgCheck(usbhURBIsBusy(urb)); - - usbh_ep_t *const ep = urb->ep; - osalDbgCheck(ep); - stm32_hc_management_t *const hcm = ep->xfer.hcm; - - if ((hcm != NULL) && (urb == _active_urb(ep))) { - /* This URB is active (channel assigned, top of the EP's URB list) */ - - if (hcm->halt_reason == USBH_LLD_HALTREASON_NONE) { - /* The channel is not being halted */ - urb->status = status; - _halt_channel(ep->device->host, hcm, USBH_LLD_HALTREASON_ABORT); - } else { - /* The channel is being halted, so we can't re-halt it. The CHH interrupt will - * be in charge of completing the transfer, but the URB will not have the specified status. - */ - } - return FALSE; - } - - /* This URB is active, we can cancel it now */ - _transfer_completedI(ep, urb, status); - - return TRUE; -} - - -/*===========================================================================*/ -/* Channel Interrupts. */ -/*===========================================================================*/ - -//CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// si si si si si si no no ep->type != ISO && !ep->in -static inline void _ack_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - (void)host; - osalDbgAssert(hcm->ep->type != USBH_EPTYPE_ISO, "ACK should not happen in ISO endpoints"); - hcm->ep->xfer.error_count = 0; - hc->HCINTMSK &= ~HCINTMSK_ACKM; - udbgf("\t%s: ACK", hcm->ep->name); -} - -//CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// si no si no si no no no ep->type != ISO && ep->in -static inline void _dterr_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - (void)host; - osalDbgAssert(hcm->ep->in && (hcm->ep->type != USBH_EPTYPE_ISO), "DTERR should not happen in OUT or ISO endpoints"); -#if 0 - hc->HCINTMSK &= ~(HCINTMSK_DTERRM | HCINTMSK_ACKM); - hcm->ep->xfer.error_count = 0; - _halt_channel(host, hcm, USBH_LLD_HALTREASON_ERROR); -#else - /* restart directly, no need to halt it in this case */ - hcm->ep->xfer.error_count = 0; - hc->HCINTMSK &= ~HCINTMSK_ACKM; - hc->HCCHAR |= HCCHAR_CHENA; -#endif - uerrf("\t%s: DTERR", hcm->ep->name); -} - -//CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// si no si no si no si no ep->in -static inline void _bberr_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - osalDbgAssert(hcm->ep->in, "BBERR should not happen in OUT endpoints"); - hc->HCINTMSK &= ~HCINTMSK_BBERRM; - hcm->ep->xfer.error_count = 3; - _halt_channel(host, hcm, USBH_LLD_HALTREASON_ERROR); - uerrf("\t%s: BBERR", hcm->ep->name); -} - -///CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// si si si si si si si no ep->type != ISO || ep->in -static inline void _trerr_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - osalDbgAssert(hcm->ep->in || (hcm->ep->type != USBH_EPTYPE_ISO), "TRERR should not happen in ISO OUT endpoints"); - hc->HCINTMSK &= ~HCINTMSK_TRERRM; - ++hcm->ep->xfer.error_count; - _halt_channel(host, hcm, USBH_LLD_HALTREASON_ERROR); - uerrf("\t%s: TRERR", hcm->ep->name); -} - -//CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// no no si si no no si si ep->type = PERIODIC -static inline void _frmor_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - osalDbgAssert(usbhEPIsPeriodic(hcm->ep), "FRMOR should not happen in non-periodic endpoints"); - hc->HCINTMSK &= ~HCINTMSK_FRMORM; - hcm->ep->xfer.error_count = 3; - _halt_channel(host, hcm, USBH_LLD_HALTREASON_ERROR); - uerrf("\t%s: FRMOR", hcm->ep->name); -} - -//CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// si si si si si si no no ep->type != ISO -static inline void _nak_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - osalDbgAssert(hcm->ep->type != USBH_EPTYPE_ISO, "NAK should not happen in ISO endpoints"); - if (!hcm->ep->in || (hcm->ep->type == USBH_EPTYPE_INT)) { - hc->HCINTMSK &= ~HCINTMSK_NAKM; - _halt_channel(host, hcm, USBH_LLD_HALTREASON_NAK); - } else { - /* restart directly, no need to halt it in this case */ - hcm->ep->xfer.error_count = 0; - hc->HCINTMSK &= ~HCINTMSK_ACKM; - hc->HCCHAR |= HCCHAR_CHENA; - } - udbgf("\t%s: NAK", hcm->ep->name); -} - -//CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) -// si sólo DAT/STAT si si si si no no ep->type != ISO && (ep->type != CTRL || ctrlphase != SETUP) -static inline void _stall_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - osalDbgAssert(hcm->ep->type != USBH_EPTYPE_ISO, "STALL should not happen in ISO endpoints"); - hc->HCINTMSK &= ~HCINTMSK_STALLM; - _halt_channel(host, hcm, USBH_LLD_HALTREASON_STALL); - uwarnf("\t%s: STALL", hcm->ep->name); -} - -static void _complete_bulk_int(USBHDriver *host, stm32_hc_management_t *hcm, usbh_ep_t *ep, usbh_urb_t *urb, uint32_t hctsiz) { - _release_channel(host, hcm); - _save_dt_mask(ep, hctsiz); - if (_update_urb(ep, hctsiz, urb, TRUE)) { - udbgf("\t%s: done", ep->name); - _transfer_completed(ep, urb, USBH_URBSTATUS_OK); - } else { - osalDbgCheck(urb->requestedLength > 0x7FFFF); - uwarnf("\t%s: incomplete", ep->name); - _move_to_pending_queue(ep); - } - if (usbhEPIsPeriodic(ep)) { - _try_commit_p(host, FALSE); - } else { - _try_commit_np(host); - } -} - -static void _complete_control(USBHDriver *host, stm32_hc_management_t *hcm, usbh_ep_t *ep, usbh_urb_t *urb, uint32_t hctsiz) { - osalDbgCheck(ep->xfer.u.ctrl_phase != USBH_LLD_CTRLPHASE_SETUP); - - _release_channel(host, hcm); - if (ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_DATA) { - if (_update_urb(ep, hctsiz, urb, TRUE)) { - udbgf("\t%s: DATA done", ep->name); - ep->xfer.u.ctrl_phase = USBH_LLD_CTRLPHASE_STATUS; - ep->in = !ep->in; - } else { - osalDbgCheck(urb->requestedLength > 0x7FFFF); - uwarnf("\t%s: DATA incomplete", ep->name); - _save_dt_mask(ep, hctsiz); - } - _move_to_pending_queue(ep); - } else { - osalDbgCheck(ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_STATUS); - udbgf("\t%s: STATUS done", ep->name); - _transfer_completed(ep, urb, USBH_URBSTATUS_OK); - } - _try_commit_np(host); -} - -static void _complete_control_setup(USBHDriver *host, stm32_hc_management_t *hcm, usbh_ep_t *ep, usbh_urb_t *urb) { - _release_channel(host, hcm); - if (urb->requestedLength) { - udbgf("\t%s: SETUP done -> DATA", ep->name); - ep->xfer.u.ctrl_phase = USBH_LLD_CTRLPHASE_DATA; - ep->in = *((uint8_t *)urb->setup_buff) & 0x80 ? TRUE : FALSE; - ep->dt_mask = HCTSIZ_DPID_DATA1; - ep->xfer.error_count = 0; - } else { - udbgf("\t%s: SETUP done -> STATUS", ep->name); - ep->in = TRUE; - ep->xfer.u.ctrl_phase = USBH_LLD_CTRLPHASE_STATUS; - } - _move_to_pending_queue(ep); - _try_commit_np(host); -} - -static void _complete_iso(USBHDriver *host, stm32_hc_management_t *hcm, usbh_ep_t *ep, usbh_urb_t *urb, uint32_t hctsiz) { - udbgf("\t%s: done", hcm->ep->name); - _release_channel(host, hcm); - _update_urb(ep, hctsiz, urb, TRUE); - _transfer_completed(ep, urb, USBH_URBSTATUS_OK); - _try_commit_p(host, FALSE); -} - -static inline void _xfrc_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - usbh_ep_t *const ep = hcm->ep; - usbh_urb_t *const urb = _active_urb(ep); - osalDbgCheck(urb); - uint32_t hctsiz = hc->HCTSIZ; - - hc->HCINTMSK &= ~HCINTMSK_XFRCM; - - switch (ep->type) { - case USBH_EPTYPE_CTRL: - if (ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_SETUP) { - _complete_control_setup(host, hcm, ep, urb); - } else if (ep->in) { - _halt_channel(host, hcm, USBH_LLD_HALTREASON_XFRC); - } else { - _complete_control(host, hcm, ep, urb, hctsiz); - } - break; - - case USBH_EPTYPE_BULK: - if (ep->in) { - _halt_channel(host, hcm, USBH_LLD_HALTREASON_XFRC); - } else { - _complete_bulk_int(host, hcm, ep, urb, hctsiz); - } - break; - - case USBH_EPTYPE_INT: - if (ep->in && (hctsiz & HCTSIZ_PKTCNT_MASK)) { - _halt_channel(host, hcm, USBH_LLD_HALTREASON_XFRC); - } else { - _complete_bulk_int(host, hcm, ep, urb, hctsiz); - } - break; - - case USBH_EPTYPE_ISO: - if (ep->in && (hctsiz & HCTSIZ_PKTCNT_MASK)) { - _halt_channel(host, hcm, USBH_LLD_HALTREASON_XFRC); - } else { - _complete_iso(host, hcm, ep, urb, hctsiz); - } - break; - } -} - -static inline void _chh_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_otg_host_chn_t *hc) { - - usbh_ep_t *const ep = hcm->ep; - usbh_urb_t *const urb = _active_urb(ep); - osalDbgCheck(urb); - uint32_t hctsiz = hc->HCTSIZ; - usbh_lld_halt_reason_t reason = hcm->halt_reason; - - //osalDbgCheck(reason != USBH_LLD_HALTREASON_NONE); - if (reason == USBH_LLD_HALTREASON_NONE) { - uwarnf("\tCHH: ch=%d, USBH_LLD_HALTREASON_NONE", hcm - host->channels); - return; - } - - if (reason == USBH_LLD_HALTREASON_XFRC) { - osalDbgCheck(ep->in); - switch (ep->type) { - case USBH_EPTYPE_CTRL: - _complete_control(host, hcm, ep, urb, hctsiz); - break; - case USBH_EPTYPE_BULK: - case USBH_EPTYPE_INT: - _complete_bulk_int(host, hcm, ep, urb, hctsiz); - break; - case USBH_EPTYPE_ISO: - _complete_iso(host, hcm, ep, urb, hctsiz); - break; - } - } else { - _release_channel(host, hcm); - _save_dt_mask(ep, hctsiz); - bool done = _update_urb(ep, hctsiz, urb, FALSE); - - switch (reason) { - case USBH_LLD_HALTREASON_NAK: - if ((ep->type == USBH_EPTYPE_INT) && ep->in) { - _transfer_completed(ep, urb, USBH_URBSTATUS_TIMEOUT); - } else { - ep->xfer.error_count = 0; - _move_to_pending_queue(ep); - } - break; - - case USBH_LLD_HALTREASON_STALL: - if ((ep->type == USBH_EPTYPE_CTRL) && (ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_SETUP)) { - uerrf("\t%s: Faulty device: STALLed SETUP phase", ep->name); - } - _transfer_completed(ep, urb, USBH_URBSTATUS_STALL); - break; - - case USBH_LLD_HALTREASON_ERROR: - if ((ep->type == USBH_EPTYPE_ISO) || done || (ep->xfer.error_count >= 3)) { - _transfer_completed(ep, urb, USBH_URBSTATUS_ERROR); - } else { - uerrf("\t%s: err=%d, done=%d, retry", ep->name, ep->xfer.error_count, done); - _move_to_pending_queue(ep); - } - break; - - case USBH_LLD_HALTREASON_ABORT: - uwarnf("\t%s: Abort", ep->name); - _transfer_completed(ep, urb, urb->status); - break; - - default: - osalDbgCheck(0); - break; - } - - if (usbhEPIsPeriodic(ep)) { - _try_commit_p(host, FALSE); - } else { - _try_commit_np(host); - } - } -} - -static void _hcint_n_int(USBHDriver *host, uint8_t chn) { - - stm32_hc_management_t *const hcm = &host->channels[chn]; - stm32_otg_host_chn_t *const hc = hcm->hc; - - uint32_t hcint = hc->HCINT; - hcint &= hc->HCINTMSK; - hc->HCINT = hcint; - - osalDbgCheck((hcint & HCINTMSK_AHBERRM) == 0); - osalDbgCheck(hcm->ep); - - if (hcint & HCINTMSK_STALLM) - _stall_int(host, hcm, hc); - if (hcint & HCINTMSK_NAKM) - _nak_int(host, hcm, hc); - if (hcint & HCINTMSK_ACKM) - _ack_int(host, hcm, hc); - if (hcint & HCINTMSK_TRERRM) - _trerr_int(host, hcm, hc); - if (hcint & HCINTMSK_BBERRM) - _bberr_int(host, hcm, hc); - if (hcint & HCINTMSK_FRMORM) - _frmor_int(host, hcm, hc); - if (hcint & HCINTMSK_DTERRM) - _dterr_int(host, hcm, hc); - if (hcint & HCINTMSK_XFRCM) - _xfrc_int(host, hcm, hc); - if (hcint & HCINTMSK_CHHM) - _chh_int(host, hcm, hc); -} - -static inline void _hcint_int(USBHDriver *host) { - uint32_t haint; - - haint = host->otg->HAINT; - haint &= host->otg->HAINTMSK; - - if (!haint) { - uerrf("HAINT=%08x, HAINTMSK=%08x", host->otg->HAINT, host->otg->HAINTMSK); - return; - } - -#if 1 //channel lookup loop - uint8_t i; - for (i = 0; haint && (i < host->channels_number); i++) { - if (haint & (1 << i)) { - _hcint_n_int(host, i); - haint &= ~(1 << i); - } - } -#else //faster calculation, with __CLZ (count leading zeroes) - while (haint) { - uint8_t chn = (uint8_t)(31 - __CLZ(haint)); - osalDbgAssert(chn < host->channels_number, "what?"); - haint &= ~host->channels[chn].haintmsk; - _hcint_n_int(host, chn); - } -#endif -} - - -/*===========================================================================*/ -/* Host interrupts. */ -/*===========================================================================*/ -static inline void _sof_int(USBHDriver *host) { - udbg("SOF"); - _try_commit_p(host, TRUE); -} - -static inline void _rxflvl_int(USBHDriver *host) { - - stm32_otg_t *const otg = host->otg; - - otg->GINTMSK &= ~GINTMSK_RXFLVLM; - while (otg->GINTSTS & GINTSTS_RXFLVL) { - uint32_t grxstsp = otg->GRXSTSP; - osalDbgCheck((grxstsp & GRXSTSP_CHNUM_MASK) < host->channels_number); - stm32_hc_management_t *const hcm = &host->channels[grxstsp & GRXSTSP_CHNUM_MASK]; - uint32_t hctsiz = hcm->hc->HCTSIZ; - - if ((grxstsp & GRXSTSP_PKTSTS_MASK) == GRXSTSP_PKTSTS(2)) { - /* 0010: IN data packet received */ - usbh_ep_t *const ep = hcm->ep; - osalDbgCheck(ep); - - /* restart the channel ASAP */ - if (hctsiz & HCTSIZ_PKTCNT_MASK) { -#if CH_DBG_ENABLE_CHECKS - if (usbhEPIsPeriodic(ep)) { - osalDbgCheck(host->otg->HPTXSTS & HPTXSTS_PTXQSAV_MASK); - } else { - osalDbgCheck(host->otg->HNPTXSTS & HPTXSTS_PTXQSAV_MASK); - } -#endif - hcm->hc->HCCHAR |= HCCHAR_CHENA; - } - - udbgf("\t%s: RXFLVL rx=%dB, rem=%dB (%dpkts)", - ep->name, - (grxstsp & GRXSTSP_BCNT_MASK) >> 4, - (hctsiz & HCTSIZ_XFRSIZ_MASK), - (hctsiz & HCTSIZ_PKTCNT_MASK) >> 19); - - /* Read */ - uint32_t *dest = (uint32_t *)ep->xfer.buf; - volatile uint32_t *const src = hcm->fifo; - - uint32_t bcnt = (grxstsp & GRXSTSP_BCNT_MASK) >> GRXSTSP_BCNT_OFF; - osalDbgCheck(bcnt + ep->xfer.partial <= ep->xfer.len); - - //TODO: optimize this - uint32_t words = bcnt / 4; - uint8_t bytes = bcnt & 3; - while (words--) { - *dest++ = *src; - } - if (bytes) { - uint32_t r = *src; - uint8_t *bsrc = (uint8_t *)&r; - uint8_t *bdest = (uint8_t *)dest; - do { - *bdest++ = *bsrc++; - } while (--bytes); - } - - ep->xfer.buf += bcnt; - ep->xfer.partial += bcnt; - -#if 0 //STM32_USBH_CHANNELS_NP > 1 - /* check bug */ - if (hctsiz & HCTSIZ_PKTCNT_MASK) { - uint32_t pkt = (hctsiz & HCTSIZ_PKTCNT_MASK) >> 19; - uint32_t siz = (hctsiz & HCTSIZ_XFRSIZ_MASK); - if (pkt * ep->wMaxPacketSize != siz) { - uerrf("\t%s: whatttt???", ep->name); - } - } -#endif - -#if USBH_DEBUG_ENABLE && USBH_LLD_DEBUG_ENABLE_ERRORS - } else { - /* 0011: IN transfer completed (triggers an interrupt) - * 0101: Data toggle error (triggers an interrupt) - * 0111: Channel halted (triggers an interrupt) - */ - switch (grxstsp & GRXSTSP_PKTSTS_MASK) { - case GRXSTSP_PKTSTS(3): - case GRXSTSP_PKTSTS(5): - case GRXSTSP_PKTSTS(7): - break; - default: - uerrf("\tRXFLVL: ch=%d, UNK=%d", grxstsp & GRXSTSP_CHNUM_MASK, (grxstsp & GRXSTSP_PKTSTS_MASK) >> 17); - break; - } -#endif - } - } - otg->GINTMSK |= GINTMSK_RXFLVLM; -} - -static inline void _nptxfe_int(USBHDriver *host) { - uint32_t rem; - stm32_otg_t *const otg = host->otg; - - rem = _write_packet(&host->ep_active_lists[USBH_EPTYPE_CTRL], - otg->HNPTXSTS & HPTXSTS_PTXFSAVL_MASK); - - rem += _write_packet(&host->ep_active_lists[USBH_EPTYPE_BULK], - otg->HNPTXSTS & HPTXSTS_PTXFSAVL_MASK); - -// if (rem) -// otg->GINTMSK |= GINTMSK_NPTXFEM; - - if (!rem) - otg->GINTMSK &= ~GINTMSK_NPTXFEM; - -} - -static inline void _ptxfe_int(USBHDriver *host) { - //TODO: implement - (void)host; - uinfo("PTXFE"); -} - -static inline void _discint_int(USBHDriver *host) { - uint32_t hprt = host->otg->HPRT; - - uwarn("\tDISCINT"); - - if (!(hprt & HPRT_PCSTS)) { - host->rootport.lld_status &= ~(USBH_PORTSTATUS_CONNECTION | USBH_PORTSTATUS_ENABLE); - host->rootport.lld_c_status |= USBH_PORTSTATUS_C_CONNECTION | USBH_PORTSTATUS_C_ENABLE; - } - _purge_active(host); - _purge_pending(host); -} - -static inline void _hprtint_int(USBHDriver *host) { - stm32_otg_t *const otg = host->otg; - uint32_t hprt = otg->HPRT; - - /* note: writing PENA = 1 actually disables the port */ - uint32_t hprt_clr = hprt & ~(HPRT_PENA | HPRT_PCDET | HPRT_PENCHNG | HPRT_POCCHNG); - - if (hprt & HPRT_PCDET) { - hprt_clr |= HPRT_PCDET; - if (hprt & HPRT_PCSTS) { - uinfo("\tHPRT: Port connection detected"); - host->rootport.lld_status |= USBH_PORTSTATUS_CONNECTION; - host->rootport.lld_c_status |= USBH_PORTSTATUS_C_CONNECTION; - } else { - uinfo("\tHPRT: Port disconnection detected"); - } - } - - if (hprt & HPRT_PENCHNG) { - hprt_clr |= HPRT_PENCHNG; - if (hprt & HPRT_PENA) { - uinfo("\tHPRT: Port enabled"); - host->rootport.lld_status |= USBH_PORTSTATUS_ENABLE; - host->rootport.lld_status &= ~(USBH_PORTSTATUS_HIGH_SPEED | USBH_PORTSTATUS_LOW_SPEED); - - /* Make sure the FIFOs are flushed. */ - otg_txfifo_flush(host, 0x10); - otg_rxfifo_flush(host); - - /* Clear all pending HC Interrupts */ - uint8_t i; - for (i = 0; i < host->channels_number; i++) { - otg->hc[i].HCINTMSK = 0; - otg->hc[i].HCINT = 0xFFFFFFFF; - } - - /* configure speed */ - if ((hprt & HPRT_PSPD_MASK) == HPRT_PSPD_LS) { - host->rootport.lld_status |= USBH_PORTSTATUS_LOW_SPEED; - otg->HFIR = 6000; - otg->HCFG = (otg->HCFG & ~HCFG_FSLSPCS_MASK) | HCFG_FSLSPCS_6; - } else { - otg->HFIR = 48000; - otg->HCFG = (otg->HCFG & ~HCFG_FSLSPCS_MASK) | HCFG_FSLSPCS_48; - } - } else { - if (hprt & HPRT_PCSTS) { - if (hprt & HPRT_POCA) { - uerr("\tHPRT: Port disabled due to overcurrent"); - } else { - uerr("\tHPRT: Port disabled due to port babble"); - } - } else { - uerr("\tHPRT: Port disabled due to disconnect"); - } - - _purge_active(host); - _purge_pending(host); - - host->rootport.lld_status &= ~USBH_PORTSTATUS_ENABLE; - } - host->rootport.lld_c_status |= USBH_PORTSTATUS_C_ENABLE; - } - - if (hprt & HPRT_POCCHNG) { - hprt_clr |= HPRT_POCCHNG; - if (hprt & HPRT_POCA) { - uerr("\tHPRT: Overcurrent"); - host->rootport.lld_status |= USBH_PORTSTATUS_OVERCURRENT; - } else { - udbg("\tHPRT: Clear overcurrent"); - host->rootport.lld_status &= ~USBH_PORTSTATUS_OVERCURRENT; - } - host->rootport.lld_c_status |= USBH_PORTSTATUS_C_OVERCURRENT; - } - - otg->HPRT = hprt_clr; -} - -static void usb_lld_serve_interrupt(USBHDriver *host) { - osalDbgCheck(host && (host->status != USBH_STATUS_STOPPED)); - - stm32_otg_t *const otg = host->otg; - uint32_t gintsts = otg->GINTSTS; - - /* check host mode */ - if (!(gintsts & GINTSTS_CMOD)) { - uerr("Device mode"); - otg->GINTSTS = gintsts; - return; - } - - /* check mismatch */ - if (gintsts & GINTSTS_MMIS) { - uerr("Mode Mismatch"); - otg->GINTSTS = gintsts; - return; - } - - gintsts &= otg->GINTMSK; - if (!gintsts) { - uwarnf("GINTSTS=%08x, GINTMSK=%08x", otg->GINTSTS, otg->GINTMSK); - return; - } -// otg->GINTMSK &= ~(GINTMSK_NPTXFEM | GINTMSK_PTXFEM); - otg->GINTSTS = gintsts; - - if (gintsts & GINTSTS_SOF) - _sof_int(host); - if (gintsts & GINTSTS_RXFLVL) - _rxflvl_int(host); - if (gintsts & GINTSTS_HPRTINT) - _hprtint_int(host); - if (gintsts & GINTSTS_DISCINT) - _discint_int(host); - if (gintsts & GINTSTS_HCINT) - _hcint_int(host); - if (gintsts & GINTSTS_NPTXFE) - _nptxfe_int(host); - if (gintsts & GINTSTS_PTXFE) - _ptxfe_int(host); - if (gintsts & GINTSTS_IPXFR) { - uerr("IPXFRM"); - } -} - - -/*===========================================================================*/ -/* Interrupt handlers. */ -/*===========================================================================*/ - -#if STM32_USBH_USE_OTG1 -OSAL_IRQ_HANDLER(STM32_OTG1_HANDLER) { - OSAL_IRQ_PROLOGUE(); - osalSysLockFromISR(); - usb_lld_serve_interrupt(&USBHD1); - osalSysUnlockFromISR(); - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if STM32_USBH_USE_OTG2 -OSAL_IRQ_HANDLER(STM32_OTG2_HANDLER) { - OSAL_IRQ_PROLOGUE(); - osalSysLockFromISR(); - usb_lld_serve_interrupt(&USBHD2); - osalSysUnlockFromISR(); - OSAL_IRQ_EPILOGUE(); -} -#endif - - -/*===========================================================================*/ -/* Initialization functions. */ -/*===========================================================================*/ -static void otg_core_reset(USBHDriver *usbp) { - stm32_otg_t *const otgp = usbp->otg; - - /* Wait AHB idle condition.*/ - while ((otgp->GRSTCTL & GRSTCTL_AHBIDL) == 0) - ; - - osalSysPolledDelayX(64); - - /* Core reset and delay of at least 3 PHY cycles.*/ - otgp->GRSTCTL = GRSTCTL_CSRST; - while ((otgp->GRSTCTL & GRSTCTL_CSRST) != 0) - ; - - osalSysPolledDelayX(24); - - /* Wait AHB idle condition.*/ - while ((otgp->GRSTCTL & GRSTCTL_AHBIDL) == 0) - ; -} - -static void otg_rxfifo_flush(USBHDriver *usbp) { - stm32_otg_t *const otgp = usbp->otg; - - otgp->GRSTCTL = GRSTCTL_RXFFLSH; - while ((otgp->GRSTCTL & GRSTCTL_RXFFLSH) != 0) - ; - /* Wait for 3 PHY Clocks.*/ - osalSysPolledDelayX(24); -} - -static void otg_txfifo_flush(USBHDriver *usbp, uint32_t fifo) { - stm32_otg_t *const otgp = usbp->otg; - - otgp->GRSTCTL = GRSTCTL_TXFNUM(fifo) | GRSTCTL_TXFFLSH; - while ((otgp->GRSTCTL & GRSTCTL_TXFFLSH) != 0) - ; - /* Wait for 3 PHY Clocks.*/ - osalSysPolledDelayX(24); -} - -static void _init(USBHDriver *host) { - int i; - - usbhObjectInit(host); - -#if STM32_USBH_USE_OTG1 -#if STM32_USBH_USE_OTG2 - if (&USBHD1 == host) { -#endif - host->otg = OTG_FS; - host->channels_number = STM32_OTG1_CHANNELS_NUMBER; -#if STM32_USBH_USE_OTG2 - } -#endif -#endif - -#if STM32_USBH_USE_OTG2 -#if STM32_USBH_USE_OTG1 - if (&USBHD2 == host) { -#endif - host->otg = OTG_HS; - host->channels_number = STM32_OTG2_CHANNELS_NUMBER; -#if STM32_USBH_USE_OTG1 - } -#endif -#endif - INIT_LIST_HEAD(&host->ch_free[0]); - INIT_LIST_HEAD(&host->ch_free[1]); - for (i = 0; i < host->channels_number; i++) { - host->channels[i].haintmsk = 1 << i; - host->channels[i].hc = &host->otg->hc[i]; - host->channels[i].fifo = host->otg->FIFO[i]; - if (i < STM32_USBH_CHANNELS_NP) { - list_add_tail(&host->channels[i].node, &host->ch_free[1]); - } else { - list_add_tail(&host->channels[i].node, &host->ch_free[0]); - } - } - for (i = 0; i < 4; i++) { - INIT_LIST_HEAD(&host->ep_active_lists[i]); - INIT_LIST_HEAD(&host->ep_pending_lists[i]); - } -} - -void usbh_lld_init(void) { -#if STM32_USBH_USE_OTG1 - _init(&USBHD1); -#endif -#if STM32_USBH_USE_OTG2 - _init(&USBHD2); -#endif -} - -static void _usbh_start(USBHDriver *usbh) { - stm32_otg_t *const otgp = usbh->otg; - - /* Clock activation.*/ -#if STM32_USBH_USE_OTG1 -#if STM32_USBH_USE_OTG2 - if (&USBHD1 == usbh) { -#endif - /* OTG FS clock enable and reset.*/ - rccEnableOTG_FS(FALSE); - rccResetOTG_FS(); - - otgp->GINTMSK = 0; - - /* Enables IRQ vector.*/ - nvicEnableVector(STM32_OTG1_NUMBER, STM32_USB_OTG1_IRQ_PRIORITY); -#if STM32_USBH_USE_OTG2 - } -#endif -#endif - -#if STM32_USBH_USE_OTG2 -#if STM32_USBH_USE_OTG1 - if (&USBHD2 == usbh) { -#endif - /* OTG HS clock enable and reset.*/ - rccEnableOTG_HS(FALSE); - rccResetOTG_HS(); - - otgp->GINTMSK = 0; - - /* Enables IRQ vector.*/ - nvicEnableVector(STM32_OTG2_NUMBER, STM32_USB_OTG2_IRQ_PRIORITY); -#if STM32_USBH_USE_OTG1 - } -#endif -#endif - - otgp->GUSBCFG = GUSBCFG_PHYSEL | GUSBCFG_TRDT(5); - - otg_core_reset(usbh); - - otgp->GCCFG = GCCFG_PWRDWN; - - /* Forced host mode. */ - otgp->GUSBCFG = GUSBCFG_FHMOD | GUSBCFG_PHYSEL | GUSBCFG_TRDT(5); - - /* PHY enabled.*/ - otgp->PCGCCTL = 0; - - /* Internal FS PHY activation.*/ -#if defined(BOARD_OTG_NOVBUSSENS) - otgp->GCCFG = GCCFG_NOVBUSSENS | GCCFG_PWRDWN; -#else - otgp->GCCFG = GCCFG_PWRDWN; -#endif - - /* 48MHz 1.1 PHY.*/ - otgp->HCFG = HCFG_FSLSS | HCFG_FSLSPCS_48; - - /* Interrupts on FIFOs half empty.*/ - otgp->GAHBCFG = 0; - - otgp->GOTGINT = 0xFFFFFFFF; - - otgp->HPRT |= HPRT_PPWR; - - /* without this delay, the FIFO sizes are set INcorrectly */ - osalThreadSleepS(MS2ST(200)); - -#define HNPTXFSIZ DIEPTXF0 -#if STM32_USBH_USE_OTG1 -#if STM32_USBH_USE_OTG2 - if (&USBHD1 == usbh) { -#endif - otgp->GRXFSIZ = GRXFSIZ_RXFD(STM32_OTG1_RXFIFO_SIZE / 4); - otgp->HNPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG1_RXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG1_NPTXFIFO_SIZE / 4); - otgp->HPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG1_RXFIFO_SIZE / 4) + (STM32_OTG1_NPTXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG1_PTXFIFO_SIZE / 4); -#if STM32_USBH_USE_OTG2 - } -#endif -#endif -#if STM32_USBH_USE_OTG2 -#if STM32_USBH_USE_OTG1 - if (&USBHD2 == usbh) { -#endif - otgp->GRXFSIZ = GRXFSIZ_RXFD(STM32_OTG2_RXFIFO_SIZE / 4); - otgp->HNPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG2_RXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG2_NPTXFIFO_SIZE / 4); - otgp->HPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG2_RXFIFO_SIZE / 4) + (STM32_OTG2_NPTXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG2_PTXFIFO_SIZE / 4); -#if STM32_USBH_USE_OTG1 - } -#endif -#endif - - otg_txfifo_flush(usbh, 0x10); - otg_rxfifo_flush(usbh); - - otgp->GINTSTS = 0xffffffff; - otgp->GINTMSK = GINTMSK_DISCM /*| GINTMSK_PTXFEM*/ | GINTMSK_HCM | GINTMSK_HPRTM - /*| GINTMSK_IPXFRM | GINTMSK_NPTXFEM*/ | GINTMSK_RXFLVLM - /*| GINTMSK_SOFM */ | GINTMSK_MMISM; - - usbh->rootport.lld_status = USBH_PORTSTATUS_POWER; - usbh->rootport.lld_c_status = 0; - - /* Global interrupts enable.*/ - otgp->GAHBCFG |= GAHBCFG_GINTMSK; -} - -void usbh_lld_start(USBHDriver *usbh) { - if (usbh->status != USBH_STATUS_STOPPED) return; - _usbh_start(usbh); -} - -/*===========================================================================*/ -/* Root Hub request handler. */ -/*===========================================================================*/ -usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestType, uint8_t bRequest, - uint16_t wvalue, uint16_t windex, uint16_t wlength, uint8_t *buf) { - - uint16_t typereq = (bmRequestType << 8) | bRequest; - - switch (typereq) { - case ClearHubFeature: - switch (wvalue) { - case USBH_HUB_FEAT_C_HUB_LOCAL_POWER: - case USBH_HUB_FEAT_C_HUB_OVER_CURRENT: - break; - default: - osalDbgAssert(0, "invalid wvalue"); - } - break; - - case ClearPortFeature: - chDbgAssert(windex == 1, "invalid windex"); - - osalSysLock(); - switch (wvalue) { - case USBH_PORT_FEAT_ENABLE: - case USBH_PORT_FEAT_SUSPEND: - case USBH_PORT_FEAT_POWER: - chDbgAssert(0, "unimplemented"); /* TODO */ - break; - - case USBH_PORT_FEAT_INDICATOR: - chDbgAssert(0, "unsupported"); - break; - - case USBH_PORT_FEAT_C_CONNECTION: - usbh->rootport.lld_c_status &= ~USBH_PORTSTATUS_C_CONNECTION; - break; - - case USBH_PORT_FEAT_C_RESET: - usbh->rootport.lld_c_status &= ~USBH_PORTSTATUS_C_RESET; - break; - - case USBH_PORT_FEAT_C_ENABLE: - usbh->rootport.lld_c_status &= ~USBH_PORTSTATUS_C_ENABLE; - break; - - case USBH_PORT_FEAT_C_SUSPEND: - usbh->rootport.lld_c_status &= ~USBH_PORTSTATUS_C_SUSPEND; - break; - - case USBH_PORT_FEAT_C_OVERCURRENT: - usbh->rootport.lld_c_status &= USBH_PORTSTATUS_C_OVERCURRENT; - break; - - default: - osalDbgAssert(0, "invalid wvalue"); - break; - } - osalOsRescheduleS(); - osalSysUnlock(); - break; - - case GetHubDescriptor: - /*dev_dbg(hsotg->dev, "GetHubDescriptor\n"); - hub_desc = (struct usb_hub_descriptor *)buf; - hub_desc->bDescLength = 9; - hub_desc->bDescriptorType = USB_DT_HUB; - hub_desc->bNbrPorts = 1; - hub_desc->wHubCharacteristics = - cpu_to_le16(HUB_CHAR_COMMON_LPSM | - HUB_CHAR_INDV_PORT_OCPM); - hub_desc->bPwrOn2PwrGood = 1; - hub_desc->bHubContrCurrent = 0; - hub_desc->u.hs.DeviceRemovable[0] = 0; - hub_desc->u.hs.DeviceRemovable[1] = 0xff;*/ - break; - - case GetHubStatus: - osalDbgCheck(wlength >= 4); - *(uint32_t *)buf = 0; - break; - - case GetPortStatus: - chDbgAssert(windex == 1, "invalid windex"); - osalDbgCheck(wlength >= 4); - osalSysLock(); - *(uint32_t *)buf = usbh->rootport.lld_status | (usbh->rootport.lld_c_status << 16); - osalOsRescheduleS(); - osalSysUnlock(); - break; - - case SetHubFeature: - chDbgAssert(0, "unsupported"); - break; - - case SetPortFeature: - chDbgAssert(windex == 1, "invalid windex"); - - switch (wvalue) { - case USBH_PORT_FEAT_TEST: - case USBH_PORT_FEAT_SUSPEND: - case USBH_PORT_FEAT_POWER: - chDbgAssert(0, "unimplemented"); /* TODO */ - break; - - case USBH_PORT_FEAT_RESET: { - osalSysLock(); - stm32_otg_t *const otg = usbh->otg; - uint32_t hprt; - otg->PCGCCTL = 0; - hprt = otg->HPRT; - /* note: writing PENA = 1 actually disables the port */ - hprt &= ~(HPRT_PSUSP | HPRT_PENA | HPRT_PCDET | HPRT_PENCHNG | HPRT_POCCHNG ); - otg->HPRT = hprt | HPRT_PRST; - osalThreadSleepS(MS2ST(60)); - otg->HPRT = hprt; - usbh->rootport.lld_c_status |= USBH_PORTSTATUS_C_RESET; - osalOsRescheduleS(); - osalSysUnlock(); - } break; - - case USBH_PORT_FEAT_INDICATOR: - chDbgAssert(0, "unsupported"); - break; - - default: - osalDbgAssert(0, "invalid wvalue"); - break; - } - break; - - default: - osalDbgAssert(0, "invalid typereq"); - break; - } - - return USBH_URBSTATUS_OK; -} - -uint8_t usbh_lld_roothub_get_statuschange_bitmap(USBHDriver *usbh) { - osalSysLock(); - if (usbh->rootport.lld_c_status) { - osalOsRescheduleS(); - osalSysUnlock(); - return 1 << 1; - } - osalOsRescheduleS(); - osalSysUnlock(); - return 0; -} - - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h deleted file mode 100644 index e8df749..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBH_LLD_H_ -#define USBH_LLD_H_ - -#include "hal.h" - -#if HAL_USE_USBH - -#include "osal.h" -#include "stm32_otg.h" - -/* TODO: - * - * - Implement ISO/INT OUT and test - * - Consider DMA mode for OTG_HS, consider external PHY for HS. - * - Implement a data pump thread, so we don't have to copy data from the ISR - * This might be a bad idea for small endpoint packet sizes (the context switch - * could be longer than the copy) - */ - -typedef enum { - USBH_LLD_CTRLPHASE_SETUP, - USBH_LLD_CTRLPHASE_DATA, - USBH_LLD_CTRLPHASE_STATUS -} usbh_lld_ctrlphase_t; - -typedef enum { - USBH_LLD_HALTREASON_NONE, - USBH_LLD_HALTREASON_XFRC, - USBH_LLD_HALTREASON_NAK, - USBH_LLD_HALTREASON_STALL, - USBH_LLD_HALTREASON_ERROR, - USBH_LLD_HALTREASON_ABORT -} usbh_lld_halt_reason_t; - - -typedef struct stm32_hc_management { - struct list_head node; - - stm32_otg_host_chn_t *hc; - volatile uint32_t *fifo; - usbh_ep_t *ep; - uint16_t haintmsk; - usbh_lld_halt_reason_t halt_reason; -} stm32_hc_management_t; - - -#define _usbhdriver_ll_data \ - stm32_otg_t *otg; \ - /* channels */ \ - uint8_t channels_number; \ - stm32_hc_management_t channels[STM32_OTG2_CHANNELS_NUMBER]; \ - struct list_head ch_free[2]; \ - /* Enpoints being processed */ \ - struct list_head ep_active_lists[4]; \ - /* Pending endpoints */ \ - struct list_head ep_pending_lists[4]; - - -#define _usbh_ep_ll_data \ - struct list_head *active_list; /* shortcut to ep list */ \ - struct list_head *pending_list; /* shortcut to ep list */ \ - struct list_head urb_list; /* list of URBs queued in this EP */ \ - struct list_head node; /* this EP */ \ - uint32_t hcintmsk; \ - uint32_t hcchar; \ - uint32_t dt_mask; /* data-toggle mask */ \ - /* current transfer */ \ - struct { \ - stm32_hc_management_t *hcm; /* assigned channel */ \ - uint32_t len; /* this transfer's total length */ \ - uint8_t *buf; /* this transfer's buffer */ \ - uint32_t partial; /* this transfer's partial length */\ - uint16_t packets; /* packets allocated */ \ - union { \ - uint32_t frame_counter; /* frame counter (for INT) */ \ - usbh_lld_ctrlphase_t ctrl_phase; /* control phase (for CTRL) */ \ - } u; \ - uint8_t error_count; /* error count */ \ - } xfer; - - - - - -#define _usbh_port_ll_data \ - uint16_t lld_c_status; \ - uint16_t lld_status; - -#define _usbh_device_ll_data - -#define _usbh_hub_ll_data - -#define _usbh_urb_ll_data \ - struct list_head node; \ - bool queued; - - -#define usbh_lld_urb_object_init(urb) \ - do { \ - osalDbgAssert(((uint32_t)urb->buff & 3) == 0, \ - "use USBH_DEFINE_BUFFER() to declare the IO buffers"); \ - urb->queued = FALSE; \ - } while (0) - - -#define usbh_lld_urb_object_reset(urb) \ - do { \ - osalDbgAssert(urb->queued == FALSE, "wrong state"); \ - osalDbgAssert(((uint32_t)urb->buff & 3) == 0, \ - "use USBH_DEFINE_BUFFER() to declare the IO buffers"); \ - } while (0) - - - -void usbh_lld_init(void); -void usbh_lld_start(USBHDriver *usbh); -void usbh_lld_ep_object_init(usbh_ep_t *ep); -void usbh_lld_ep_open(usbh_ep_t *ep); -void usbh_lld_ep_close(usbh_ep_t *ep); -void usbh_lld_urb_submit(usbh_urb_t *urb); -bool usbh_lld_urb_abort(usbh_urb_t *urb, usbh_urbstatus_t status); -usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestType, uint8_t bRequest, - uint16_t wvalue, uint16_t windex, uint16_t wlength, uint8_t *buf); -uint8_t usbh_lld_roothub_get_statuschange_bitmap(USBHDriver *usbh); - -#define usbh_lld_epreset(ep) do {(ep)->dt_mask = HCTSIZ_DPID_DATA0;} while (0); - -#ifdef __IAR_SYSTEMS_ICC__ -#define USBH_LLD_DEFINE_BUFFER(type, name) type name -#else -#define USBH_LLD_DEFINE_BUFFER(type, name) type name __attribute__((aligned(4))) -#endif - -#endif - -#endif /* USBH_LLD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F0xx/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F0xx/platform.mk deleted file mode 100644 index 377acdf..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F0xx/platform.mk +++ /dev/null @@ -1,9 +0,0 @@ -include ${CHIBIOS}/os/hal/ports/STM32/STM32F0xx/platform.mk - -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \ - -PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F1xx/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F1xx/platform.mk deleted file mode 100644 index a8f21bc..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F1xx/platform.mk +++ /dev/null @@ -1,15 +0,0 @@ -include ${CHIBIOS}/os/hal/ports/STM32/STM32F1xx/platform.mk - -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_fsmc_sdram.c - -PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F3xx/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F3xx/platform.mk deleted file mode 100644 index 92f033c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F3xx/platform.mk +++ /dev/null @@ -1,10 +0,0 @@ -include ${CHIBIOS}/os/hal/ports/STM32/STM32F3xx/platform.mk - -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \ - -PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F4xx/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F4xx/platform.mk deleted file mode 100644 index c312e72..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/STM32/STM32F4xx/platform.mk +++ /dev/null @@ -1,21 +0,0 @@ -include ${CHIBIOS}/os/hal/ports/STM32/STM32F4xx/platform.mk - -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/src/hal_fsmc_sdram.c - -PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/DMA2Dv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/LTDCv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/USBHv1 \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.c deleted file mode 100644 index efe6421..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.c +++ /dev/null @@ -1,981 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/ext_lld.c - * @brief Tiva EXT subsystem low level driver source. - * - * @addtogroup EXT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * @brief Generic interrupt serving code for multiple pins per interrupt - * handler. - */ -#define ext_lld_serve_port_interrupt(gpiop, start) \ - do { \ - uint32_t mis = gpiop->MIS; \ - \ - gpiop->ICR = mis; \ - \ - if (mis & (1 << 0)) { \ - EXTD1.config->channels[start + 0].cb(&EXTD1, start + 0); \ - } \ - if (mis & (1 << 1)) { \ - EXTD1.config->channels[start + 1].cb(&EXTD1, start + 1); \ - } \ - if (mis & (1 << 2)) { \ - EXTD1.config->channels[start + 2].cb(&EXTD1, start + 2); \ - } \ - if (mis & (1 << 3)) { \ - EXTD1.config->channels[start + 3].cb(&EXTD1, start + 3); \ - } \ - if (mis & (1 << 4)) { \ - EXTD1.config->channels[start + 4].cb(&EXTD1, start + 4); \ - } \ - if (mis & (1 << 5)) { \ - EXTD1.config->channels[start + 5].cb(&EXTD1, start + 5); \ - } \ - if (mis & (1 << 6)) { \ - EXTD1.config->channels[start + 6].cb(&EXTD1, start + 6); \ - } \ - if (mis & (1 << 7)) { \ - EXTD1.config->channels[start + 7].cb(&EXTD1, start + 7); \ - } \ - } while (0); - -/** - * @brief Generic interrupt serving code for single pin per interrupt - * handler. - */ -#define ext_lld_serve_pin_interrupt(gpiop, start, pin) \ - do { \ - gpiop->ICR = (1 << pin); \ - EXTD1.config->channels[start].cb(&EXTD1, start); \ - } while (0); - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief EXTD1 driver identifier. - */ -EXTDriver EXTD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -const ioportid_t gpio[] = -{ -#if TIVA_HAS_GPIOA - GPIOA, -#endif -#if TIVA_HAS_GPIOB - GPIOB, -#endif -#if TIVA_HAS_GPIOC - GPIOC, -#endif -#if TIVA_HAS_GPIOD - GPIOD, -#endif -#if TIVA_HAS_GPIOE - GPIOE, -#endif -#if TIVA_HAS_GPIOF - GPIOF, -#endif -#if TIVA_HAS_GPIOG - GPIOG, -#endif -#if TIVA_HAS_GPIOH - GPIOH, -#endif -#if TIVA_HAS_GPIOJ - GPIOJ, -#endif -#if TIVA_HAS_GPIOK - GPIOK, -#endif -#if TIVA_HAS_GPIOL - GPIOL, -#endif -#if TIVA_HAS_GPIOM - GPIOM, -#endif -#if TIVA_HAS_GPION - GPION, -#endif -#if TIVA_HAS_GPIOP - GPIOP, -#endif -#if TIVA_HAS_GPIOQ - GPIOQ, -#endif -#if TIVA_HAS_GPIOR - GPIOR, -#endif -#if TIVA_HAS_GPIOS - GPIOS, -#endif -#if TIVA_HAS_GPIOT - GPIOT, -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Enables GPIO IRQ sources. - * - * @notapi - */ -static void ext_lld_irq_enable(void) -{ -#if TIVA_HAS_GPIOA - nvicEnableVector(TIVA_GPIOA_NUMBER, TIVA_EXT_GPIOA_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOB - nvicEnableVector(TIVA_GPIOB_NUMBER, TIVA_EXT_GPIOB_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOC - nvicEnableVector(TIVA_GPIOC_NUMBER, TIVA_EXT_GPIOC_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOD - nvicEnableVector(TIVA_GPIOD_NUMBER, TIVA_EXT_GPIOD_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOE - nvicEnableVector(TIVA_GPIOE_NUMBER, TIVA_EXT_GPIOE_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOF - nvicEnableVector(TIVA_GPIOF_NUMBER, TIVA_EXT_GPIOF_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOG - nvicEnableVector(TIVA_GPIOG_NUMBER, TIVA_EXT_GPIOG_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOH - nvicEnableVector(TIVA_GPIOH_NUMBER, TIVA_EXT_GPIOH_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOJ - nvicEnableVector(TIVA_GPIOJ_NUMBER, TIVA_EXT_GPIOJ_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOK - nvicEnableVector(TIVA_GPIOK_NUMBER, TIVA_EXT_GPIOK_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOL - nvicEnableVector(TIVA_GPIOL_NUMBER, TIVA_EXT_GPIOL_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOM - nvicEnableVector(TIVA_GPIOM_NUMBER, TIVA_EXT_GPIOM_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPION - nvicEnableVector(TIVA_GPION_NUMBER, TIVA_EXT_GPION_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOP - nvicEnableVector(TIVA_GPIOP0_NUMBER, TIVA_EXT_GPIOP0_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP1_NUMBER, TIVA_EXT_GPIOP1_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP2_NUMBER, TIVA_EXT_GPIOP2_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP3_NUMBER, TIVA_EXT_GPIOP3_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP4_NUMBER, TIVA_EXT_GPIOP4_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP5_NUMBER, TIVA_EXT_GPIOP5_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP6_NUMBER, TIVA_EXT_GPIOP6_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP7_NUMBER, TIVA_EXT_GPIOP7_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOQ - nvicEnableVector(TIVA_GPIOQ0_NUMBER, TIVA_EXT_GPIOQ0_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ1_NUMBER, TIVA_EXT_GPIOQ1_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ2_NUMBER, TIVA_EXT_GPIOQ2_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ3_NUMBER, TIVA_EXT_GPIOQ3_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ4_NUMBER, TIVA_EXT_GPIOQ4_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ5_NUMBER, TIVA_EXT_GPIOQ5_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ6_NUMBER, TIVA_EXT_GPIOQ6_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ7_NUMBER, TIVA_EXT_GPIOQ7_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOR - nvicEnableVector(TIVA_GPIOR_NUMBER, TIVA_EXT_GPIOR_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOS - nvicEnableVector(TIVA_GPIOS_NUMBER, TIVA_EXT_GPIOS_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOT - nvicEnableVector(TIVA_GPIOT_NUMBER, TIVA_EXT_GPIOT_IRQ_PRIORITY); -#endif -} - -/** - * @brief Disables GPIO IRQ sources. - * - * @notapi - */ -static void ext_lld_irq_disable(void) -{ -#if TIVA_HAS_GPIOA - nvicDisableVector(TIVA_GPIOA_NUMBER); -#endif -#if TIVA_HAS_GPIOB - nvicDisableVector(TIVA_GPIOB_NUMBER); -#endif -#if TIVA_HAS_GPIOC - nvicDisableVector(TIVA_GPIOC_NUMBER); -#endif -#if TIVA_HAS_GPIOD - nvicDisableVector(TIVA_GPIOD_NUMBER); -#endif -#if TIVA_HAS_GPIOE - nvicDisableVector(TIVA_GPIOE_NUMBER); -#endif -#if TIVA_HAS_GPIOF - nvicDisableVector(TIVA_GPIOF_NUMBER); -#endif -#if TIVA_HAS_GPIOG - nvicDisableVector(TIVA_GPIOG_NUMBER); -#endif -#if TIVA_HAS_GPIOH - nvicDisableVector(TIVA_GPIOH_NUMBER); -#endif -#if TIVA_HAS_GPIOJ - nvicDisableVector(TIVA_GPIOJ_NUMBER); -#endif -#if TIVA_HAS_GPIOK - nvicDisableVector(TIVA_GPIOK_NUMBER); -#endif -#if TIVA_HAS_GPIOL - nvicDisableVector(TIVA_GPIOL_NUMBER); -#endif -#if TIVA_HAS_GPIOM - nvicDisableVector(TIVA_GPIOM_NUMBER); -#endif -#if TIVA_HAS_GPION - nvicDisableVector(TIVA_GPION_NUMBER); -#endif -#if TIVA_HAS_GPIOP - nvicDisableVector(TIVA_GPIOP0_NUMBER); - nvicDisableVector(TIVA_GPIOP1_NUMBER); - nvicDisableVector(TIVA_GPIOP2_NUMBER); - nvicDisableVector(TIVA_GPIOP3_NUMBER); - nvicDisableVector(TIVA_GPIOP4_NUMBER); - nvicDisableVector(TIVA_GPIOP5_NUMBER); - nvicDisableVector(TIVA_GPIOP6_NUMBER); - nvicDisableVector(TIVA_GPIOP7_NUMBER); -#endif -#if TIVA_HAS_GPIOQ - nvicDisableVector(TIVA_GPIOQ0_NUMBER); - nvicDisableVector(TIVA_GPIOQ1_NUMBER); - nvicDisableVector(TIVA_GPIOQ2_NUMBER); - nvicDisableVector(TIVA_GPIOQ3_NUMBER); - nvicDisableVector(TIVA_GPIOQ4_NUMBER); - nvicDisableVector(TIVA_GPIOQ5_NUMBER); - nvicDisableVector(TIVA_GPIOQ6_NUMBER); - nvicDisableVector(TIVA_GPIOQ7_NUMBER); -#endif -#if TIVA_HAS_GPIOR - nvicDisableVector(TIVA_GPIOR_NUMBER); -#endif -#if TIVA_HAS_GPIOS - nvicDisableVector(TIVA_GPIOS_NUMBER); -#endif -#if TIVA_HAS_GPIOT - nvicDisableVector(TIVA_GPIOT_NUMBER); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_HAS_GPIOA || defined(__DOXYGEN__) -/** - * @brief GPIOA interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOA_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOA, 0); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOB || defined(__DOXYGEN__) -/** - * @brief GPIOB interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOB_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOB, 8); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOC || defined(__DOXYGEN__) -/** - * @brief GPIOC interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOC_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOC, 16); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOD || defined(__DOXYGEN__) -/** - * @brief GPIOD interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOD_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOD, 24); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOE || defined(__DOXYGEN__) -/** - * @brief GPIOE interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOE_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOE, 32); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOF || defined(__DOXYGEN__) -/** - * @brief GPIOF interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOF_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOF, 40); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) -/** - * @brief GPIOG interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOG_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOG, 48); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) -/** - * @brief GPIOH interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOH_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOH, 56); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) -/** - * @brief GPIOJ interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOJ_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOJ, 64); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) -/** - * @brief GPIOK interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOK_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOK, 72); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) -/** - * @brief GPIOL interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOL_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOL, 80); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) -/** - * @brief GPIOM interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOM_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOM, 88); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) -/** - * @brief GPION interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPION_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPION, 96); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) -/** - * @brief GPIOP0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 104, 0); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 105, 1); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 106, 2); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 107, 3); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP4 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP4_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 108, 4); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP5 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP5_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 109, 5); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP6 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP6_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 110, 6); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP7 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP7_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 111, 7); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) -/** - * @brief GPIOQ0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 112, 0); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 113, 1); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 114, 2); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 115, 3); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ4 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ4_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 116, 4); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ5 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ5_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 117, 5); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ6 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ6_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 118, 6); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ7 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ7_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 119, 7); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) -/** - * @brief GPIOR interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOR_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOR, 120); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) -/** - * @brief GPIOS interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOS_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOS, 128); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) -/** - * @brief GPIOT interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOT_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOT, 132); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level EXT driver initialization. - * - * @notapi - */ -void ext_lld_init(void) -{ - extObjectInit(&EXTD1); -} - -/** - * @brief Configures and activates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_start(EXTDriver *extp) -{ - uint8_t i; - - if (extp->state == EXT_STOP) { - ext_lld_irq_enable(); - } - - /* Configuration of automatic channels.*/ - for (i = 0; i < EXT_MAX_CHANNELS; i++) { - if (extp->config->channels[i].mode & EXT_CH_MODE_AUTOSTART) { - ext_lld_channel_enable(extp, i); - } - else { - ext_lld_channel_disable(extp, i); - } - } -} - -/** - * @brief Deactivates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_stop(EXTDriver *extp) -{ - if (extp->state == EXT_ACTIVE) { - ext_lld_irq_disable(); - } - -#if TIVA_HAS_GPIOA - GPIOA->IM = 0; -#endif -#if TIVA_HAS_GPIOB - GPIOB->IM = 0; -#endif -#if TIVA_HAS_GPIOC - GPIOC->IM = 0; -#endif -#if TIVA_HAS_GPIOD - GPIOD->IM = 0; -#endif -#if TIVA_HAS_GPIOE - GPIOE->IM = 0; -#endif -#if TIVA_HAS_GPIOF - GPIOF->IM = 0; -#endif -#if TIVA_HAS_GPIOG - GPIOG->IM = 0; -#endif -#if TIVA_HAS_GPIOH - GPIOH->IM = 0; -#endif -#if TIVA_HAS_GPIOJ - GPIOJ->IM = 0; -#endif -#if TIVA_HAS_GPIOK - GPIOK->IM = 0; -#endif -#if TIVA_HAS_GPIOL - GPIOL->IM = 0; -#endif -#if TIVA_HAS_GPIOM - GPIOM->IM = 0; -#endif -#if TIVA_HAS_GPION - GPION->IM = 0; -#endif -#if TIVA_HAS_GPIOP - GPIOP->IM = 0; -#endif -#if TIVA_HAS_GPIOQ - GPIOQ->IM = 0; -#endif -#if TIVA_HAS_GPIOR - GPIOR->IM = 0; -#endif -#if TIVA_HAS_GPIOS - GPIOS->IM = 0; -#endif -#if TIVA_HAS_GPIOT - GPIOT->IM = 0; -#endif -} - -/** - * @brief Enables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be enabled - * - * @notapi - */ -void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) -{ - GPIO_TypeDef *gpiop; - uint8_t pin; - uint32_t im; - - pin = channel & 0x07; - gpiop = gpio[channel >> 3]; - - /* Disable interrupts */ - im = gpiop->IM; - gpiop->IM = 0; - - /* Configure pin to be edge-sensitive.*/ - gpiop->IS &= ~(1 << pin); - - /* Programming edge registers.*/ - if ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) == - EXT_CH_MODE_BOTH_EDGES) { - gpiop->IBE |= (1 << pin); - } - else if ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) == - EXT_CH_MODE_FALLING_EDGE) { - gpiop->IBE &= ~(1 << pin); - gpiop->IEV &= ~(1 << pin); - } - else if ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) == - EXT_CH_MODE_RISING_EDGE) { - gpiop->IBE &= ~(1 << pin); - gpiop->IEV |= (1 << pin); - } - - /* Programming interrupt and event registers.*/ - if ((extp->config->channels[channel].cb != NULL) && - ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) != - EXT_CH_MODE_DISABLED)) { - im |= (1 << pin); - } - else { - im &= ~(1 << pin); - } - - /* Restore interrupts */ - gpiop->IM = im; -} - -/** - * @brief Disables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be disabled - * - * @notapi - */ -void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - GPIO_TypeDef *gpiop; - uint8_t pin; - - pin = channel & 0x07; - gpiop = gpio[channel >> 3]; - - gpiop->IM &= ~(1 << pin); -} - -#endif /* HAL_USE_EXT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.h deleted file mode 100644 index 08accb2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_ext_lld.h +++ /dev/null @@ -1,523 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/ext_lld.h - * @brief Tiva EXT subsystem low level driver header. - * - * @addtogroup EXT - * @{ - */ - -#ifndef HAL_EXT_LLD_H -#define HAL_EXT_LLD_H - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Number of EXT per port. - */ -#define EXT_MAX_CHANNELS TIVA_GPIO_PINS - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief GPIOA interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOA_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOA_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOB interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOB_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOB_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOC interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOC_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOC_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOD interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOD_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOD_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOE interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOE_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOE_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOF interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOF_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOF_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOG interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOG_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOG_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOH interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOH_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOH_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOJ interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOJ_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOJ_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOK interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOK_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOK_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOL interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOL_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOL_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOM interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOM_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOM_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPION interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPION_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPION_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP0 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP0_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP1 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP1_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP2 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP2_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP3 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP3_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP4 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP4_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP5 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP5_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP6 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP6_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP6_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP7 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP7_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP7_IRQ_PRIORITY 3 -#endif -/** @} */ - -/** - * @brief GPIOQ0 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ0_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ1 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ1_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ2 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ2_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ3 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ3_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ4 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ4_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ5 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ5_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ6 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ6_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ6_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ7 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ7_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ7_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOR interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOR_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOR_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOS interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOS_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOS_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOT interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOT_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOT_IRQ_PRIORITY 3 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if TIVA_HAS_GPIOA && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOA_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOA" -#endif - -#if TIVA_HAS_GPIOB && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOB_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOB" -#endif - -#if TIVA_HAS_GPIOC && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOC_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOC" -#endif - -#if TIVA_HAS_GPIOD && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOD_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOD" -#endif - -#if TIVA_HAS_GPIOE && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOE_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOE" -#endif - -#if TIVA_HAS_GPIOF && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOF_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOF" -#endif - -#if TIVA_HAS_GPIOG && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOG_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOG" -#endif - -#if TIVA_HAS_GPIOH && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOH_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOH" -#endif - -#if TIVA_HAS_GPIOJ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOJ_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOJ" -#endif - -#if TIVA_HAS_GPIOK && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOK_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOK" -#endif - -#if TIVA_HAS_GPIOL && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOL_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOL" -#endif - -#if TIVA_HAS_GPIOM && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOM_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOM" -#endif - -#if TIVA_HAS_GPION && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPION_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPION" -#endif - -#if TIVA_HAS_GPIOP0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP0" -#endif - -#if TIVA_HAS_GPIOP1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP1" -#endif - -#if TIVA_HAS_GPIOP2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP2" -#endif - -#if TIVA_HAS_GPIOP3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP3" -#endif - -#if TIVA_HAS_GPIOP4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP4" -#endif - -#if TIVA_HAS_GPIOP5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP5" -#endif - -#if TIVA_HAS_GPIOP6 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP6_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP6" -#endif - -#if TIVA_HAS_GPIOP7 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP7_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP7" -#endif - -#if TIVA_HAS_GPIOQ0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ0" -#endif - -#if TIVA_HAS_GPIOQ1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ1" -#endif - -#if TIVA_HAS_GPIOQ2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ2" -#endif - -#if TIVA_HAS_GPIOQ3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ3" -#endif - -#if TIVA_HAS_GPIOQ4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ4" -#endif - -#if TIVA_HAS_GPIOQ5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ5" -#endif - -#if TIVA_HAS_GPIOQ6 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ6_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ6" -#endif - -#if TIVA_HAS_GPIOQ7 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ7_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ7" -#endif - -#if TIVA_HAS_GPIOR && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOR_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOR" -#endif - -#if TIVA_HAS_GPIOS && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOS_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOS" -#endif - -#if TIVA_HAS_GPIOT && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOT_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOT" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief EXT channel identifier. - */ -typedef uint32_t expchannel_t; - -/** - * @brief Type of an EXT generic notification callback. - * - * @param[in] extp pointer to the @p EXPDriver object triggering the - * callback - */ -typedef void (*extcallback_t)(EXTDriver *extp, expchannel_t channel); - -/** - * @brief Channel configuration structure. - */ -typedef struct { - /** - * @brief Channel mode. - */ - uint32_t mode; - /** - * @brief Channel callback. - */ - extcallback_t cb; -} EXTChannelConfig; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Channel configurations. - */ - EXTChannelConfig channels[EXT_MAX_CHANNELS]; - /* End of the mandatory fields.*/ -} EXTConfig; - -/** - * @brief Structure representing an EXT driver. - */ -struct EXTDriver { - /** - * @brief Driver state. - */ - extstate_t state; - /** - * @brief Current configuration data. - */ - const EXTConfig *config; - /* End of the mandatory fields.*/ -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -extern EXTDriver EXTD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void ext_lld_init(void); - void ext_lld_start(EXTDriver *extp); - void ext_lld_stop(EXTDriver *extp); - void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel); - void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EXT */ - -#endif /* HAL_EXT_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.c deleted file mode 100644 index 86f2303..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.c +++ /dev/null @@ -1,708 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/gpt_lld.c - * @brief TM4C123x/TM4C129x GPT subsystem low level driver source. - * - * @addtogroup GPT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_GPT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief GPTD1 driver identifier. - */ -#if TIVA_GPT_USE_GPT0 || defined(__DOXYGEN__) -GPTDriver GPTD1; -#endif - -/** - * @brief GPTD2 driver identifier. - */ -#if TIVA_GPT_USE_GPT1 || defined(__DOXYGEN__) -GPTDriver GPTD2; -#endif - -/** - * @brief GPTD3 driver identifier. - */ -#if TIVA_GPT_USE_GPT2 || defined(__DOXYGEN__) -GPTDriver GPTD3; -#endif - -/** - * @brief GPTD4 driver identifier. - */ -#if TIVA_GPT_USE_GPT3 || defined(__DOXYGEN__) -GPTDriver GPTD4; -#endif - -/** - * @brief GPTD5 driver identifier. - */ -#if TIVA_GPT_USE_GPT4 || defined(__DOXYGEN__) -GPTDriver GPTD5; -#endif - -/** - * @brief GPTD6 driver identifier. - */ -#if TIVA_GPT_USE_GPT5 || defined(__DOXYGEN__) -GPTDriver GPTD6; -#endif - -/** - * @brief GPTD7 driver identifier. - */ -#if TIVA_GPT_USE_WGPT0 || defined(__DOXYGEN__) -GPTDriver GPTD7; -#endif - -/** - * @brief GPTD8 driver identifier. - */ -#if TIVA_GPT_USE_WGPT1 || defined(__DOXYGEN__) -GPTDriver GPTD8; -#endif - -/** - * @brief GPTD9 driver identifier. - */ -#if TIVA_GPT_USE_WGPT2 || defined(__DOXYGEN__) -GPTDriver GPTD9; -#endif - -/** - * @brief GPTD10 driver identifier. - */ -#if TIVA_GPT_USE_WGPT3 || defined(__DOXYGEN__) -GPTDriver GPTD10; -#endif - -/** - * @brief GPTD11 driver identifier. - */ -#if TIVA_GPT_USE_WGPT4 || defined(__DOXYGEN__) -GPTDriver GPTD11; -#endif - -/** - * @brief GPTD12 driver identifier. - */ -#if TIVA_GPT_USE_WGPT5 || defined(__DOXYGEN__) -GPTDriver GPTD12; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Shared IRQ handler. - * - * @param[in] gptp pointer to @p GPTDriver object - */ -static void gpt_lld_serve_interrupt(GPTDriver *gptp) -{ - gptp->gpt->ICR = 0xffffffff; - - if (gptp->state == GPT_ONESHOT) { - gptp->state = GPT_READY; - gpt_lld_stop_timer(gptp); - } - - gptp->config->callback(gptp); -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_GPT_USE_GPT0 -#if !defined(TIVA_GPT0A_HANDLER) -#error "TIVA_GPT0A_HANDLER not defined" -#endif -/** - * @brief GPT0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPT0A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD1); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_GPT1 -#if !defined(TIVA_GPT1A_HANDLER) -#error "TIVA_GPT1A_HANDLER not defined" -#endif -/** - * @brief GPT1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPT1A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD2); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_GPT2 -#if !defined(TIVA_GPT2A_HANDLER) -#error "TIVA_GPT2A_HANDLER not defined" -#endif -/** - * @brief GPT2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPT2A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD3); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_GPT3 -#if !defined(TIVA_GPT3A_HANDLER) -#error "TIVA_GPT3A_HANDLER not defined" -#endif -/** - * @brief GPT3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPT3A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD4); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_GPT4 -#if !defined(TIVA_GPT4A_HANDLER) -#error "TIVA_GPT4A_HANDLER not defined" -#endif -/** - * @brief GPT4 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPT4A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD5); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_GPT5 -#if !defined(TIVA_GPT5A_HANDLER) -#error "TIVA_GPT5A_HANDLER not defined" -#endif -/** - * @brief GPT5 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPT5A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD6); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_WGPT0 -#if !defined(TIVA_WGPT0A_HANDLER) -#error "TIVA_WGPT0A_HANDLER not defined" -#endif -/** - * @brief WGPT0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WGPT0A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD7); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_WGPT1 -#if !defined(TIVA_WGPT1A_HANDLER) -#error "TIVA_WGPT1A_HANDLER not defined" -#endif -/** - * @brief WGPT1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WGPT1A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD8); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_WGPT2 -#if !defined(TIVA_WGPT2A_HANDLER) -#error "TIVA_WGPT2A_HANDLER not defined" -#endif -/** - * @brief WGPT2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WGPT2A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD9); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_WGPT3 -#if !defined(TIVA_WGPT3A_HANDLER) -#error "TIVA_WGPT3A_HANDLER not defined" -#endif -/** - * @brief WGPT3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WGPT3A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD10); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_WGPT4 -#if !defined(TIVA_WGPT4A_HANDLER) -#error "TIVA_WGPT4A_HANDLER not defined" -#endif -/** - * @brief WGPT4 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WGPT4A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD11); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_GPT_USE_WGPT5 -#if !defined(TIVA_WGPT5A_HANDLER) -#error "TIVA_WGPT5A_HANDLER not defined" -#endif -/** - * @brief WGPT5 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WGPT5A_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - gpt_lld_serve_interrupt(&GPTD12); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level GPT driver initialization. - * - * @notapi - */ -void gpt_lld_init(void) -{ - /* Driver initialization.*/ -#if TIVA_GPT_USE_GPT0 - GPTD1.gpt = GPT0; - gptObjectInit(&GPTD1); -#endif - -#if TIVA_GPT_USE_GPT1 - GPTD2.gpt = GPT1; - gptObjectInit(&GPTD2); -#endif - -#if TIVA_GPT_USE_GPT2 - GPTD3.gpt = GPT2; - gptObjectInit(&GPTD3); -#endif - -#if TIVA_GPT_USE_GPT3 - GPTD4.gpt = GPT3; - gptObjectInit(&GPTD4); -#endif - -#if TIVA_GPT_USE_GPT4 - GPTD5.gpt = GPT4; - gptObjectInit(&GPTD5); -#endif - -#if TIVA_GPT_USE_GPT5 - GPTD6.gpt = GPT5; - gptObjectInit(&GPTD6); -#endif - -#if TIVA_GPT_USE_WGPT0 - GPTD7.gpt = WGPT0; - gptObjectInit(&GPTD7); -#endif - -#if TIVA_GPT_USE_WGPT1 - GPTD8.gpt = WGPT1; - gptObjectInit(&GPTD8); -#endif - -#if TIVA_GPT_USE_WGPT2 - GPTD9.gpt = WGPT2; - gptObjectInit(&GPTD9); -#endif - -#if TIVA_GPT_USE_WGPT3 - GPTD10.gpt = WGPT3; - gptObjectInit(&GPTD10); -#endif - -#if TIVA_GPT_USE_WGPT4 - GPTD11.gpt = WGPT4; - gptObjectInit(&GPTD11); -#endif - -#if TIVA_GPT_USE_WGPT5 - GPTD12.gpt = WGPT5; - gptObjectInit(&GPTD12); -#endif -} - -/** - * @brief Configures and activates the GPT peripheral. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_start(GPTDriver *gptp) -{ - if (gptp->state == GPT_STOP) { - /* Clock activation.*/ -#if TIVA_GPT_USE_GPT0 - if (&GPTD1 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 0); - nvicEnableVector(TIVA_GPT0A_NUMBER, TIVA_GPT_GPT0A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_GPT1 - if (&GPTD2 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 1); - nvicEnableVector(TIVA_GPT1A_NUMBER, TIVA_GPT_GPT1A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_GPT2 - if (&GPTD3 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 2); - nvicEnableVector(TIVA_GPT2A_NUMBER, TIVA_GPT_GPT2A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_GPT3 - if (&GPTD4 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 3); - nvicEnableVector(TIVA_GPT3A_NUMBER, TIVA_GPT_GPT3A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_GPT4 - if (&GPTD5 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 4); - nvicEnableVector(TIVA_GPT4A_NUMBER, TIVA_GPT_GPT4A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_GPT5 - if (&GPTD6 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 5); - nvicEnableVector(TIVA_GPT5A_NUMBER, TIVA_GPT_GPT5A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_WGPT0 - if (&GPTD7 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 0); - nvicEnableVector(TIVA_WGPT0A_NUMBER, TIVA_GPT_WGPT0A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_WGPT1 - if (&GPTD8 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 1); - nvicEnableVector(TIVA_WGPT1A_NUMBER, TIVA_GPT_WGPT1A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_WGPT2 - if (&GPTD9 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 2); - nvicEnableVector(TIVA_WGPT2A_NUMBER, TIVA_GPT_WGPT2A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_WGPT3 - if (&GPTD10 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 3); - nvicEnableVector(TIVA_WGPT3A_NUMBER, TIVA_GPT_WGPT3A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_WGPT4 - if (&GPTD11 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 4); - nvicEnableVector(TIVA_WGPT4A_NUMBER, TIVA_GPT_WGPT4A_IRQ_PRIORITY); - } -#endif - -#if TIVA_GPT_USE_WGPT5 - if (&GPTD12 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 5); - nvicEnableVector(TIVA_WGPT5A_NUMBER, TIVA_GPT_WGPT5A_IRQ_PRIORITY); - } -#endif - } - - /* Timer configuration.*/ - gptp->gpt->CTL = 0; - gptp->gpt->CFG = GPTM_CFG_CFG_SPLIT; - gptp->gpt->TAPR = ((TIVA_SYSCLK / gptp->config->frequency) - 1); -} - -/** - * @brief Deactivates the GPT peripheral. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_stop(GPTDriver *gptp) -{ - if (gptp->state == GPT_READY) { - gptp->gpt->IMR = 0; - gptp->gpt->TAILR = 0; - gptp->gpt->CTL = 0; - -#if TIVA_GPT_USE_GPT0 - if (&GPTD1 == gptp) { - nvicDisableVector(TIVA_GPT0A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 0); - } -#endif - -#if TIVA_GPT_USE_GPT1 - if (&GPTD2 == gptp) { - nvicDisableVector(TIVA_GPT1A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 1); - } -#endif - -#if TIVA_GPT_USE_GPT2 - if (&GPTD3 == gptp) { - nvicDisableVector(TIVA_GPT2A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 2); - } -#endif - -#if TIVA_GPT_USE_GPT3 - if (&GPTD4 == gptp) { - nvicDisableVector(TIVA_GPT3A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 3); - } -#endif - -#if TIVA_GPT_USE_GPT4 - if (&GPTD5 == gptp) { - nvicDisableVector(TIVA_GPT4A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 4); - } -#endif - -#if TIVA_GPT_USE_GPT5 - if (&GPTD6 == gptp) { - nvicDisableVector(TIVA_GPT5A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 5); - } -#endif - -#if TIVA_GPT_USE_WGPT0 - if (&GPTD7 == gptp) { - nvicDisableVector(TIVA_WGPT0A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 0); - } -#endif - -#if TIVA_GPT_USE_WGPT1 - if (&GPTD8 == gptp) { - nvicDisableVector(TIVA_WGPT1A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 1); - } -#endif - -#if TIVA_GPT_USE_WGPT2 - if (&GPTD9 == gptp) { - nvicDisableVector(TIVA_WGPT2A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 2); - } -#endif - -#if TIVA_GPT_USE_WGPT3 - if (&GPTD10 == gptp) { - nvicDisableVector(TIVA_WGPT3A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 3); - } -#endif - -#if TIVA_GPT_USE_WGPT4 - if (&GPTD11 == gptp) { - nvicDisableVector(TIVA_WGPT4A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 4); - } -#endif - -#if TIVA_GPT_USE_WGPT5 - if (&GPTD12 == gptp) { - nvicDisableVector(TIVA_WGPT5A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 5); - } -#endif - } -} - -/** - * @brief Starts the timer in continuous mode. - * - * @param[in] gptp pointer to the @p GPTDriver object - * @param[in] interval period in ticks - * - * @notapi - */ -void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) -{ - gptp->gpt->TAILR = interval - 1; - gptp->gpt->ICR = 0xfffffff; - gptp->gpt->IMR = GPTM_IMR_TATOIM; - gptp->gpt->TAMR = GPTM_TAMR_TAMR_PERIODIC | GPTM_TAMR_TAILD | GPTM_TAMR_TASNAPS; - gptp->gpt->CTL = GPTM_CTL_TAEN | GPTM_CTL_TASTALL; -} - -/** - * @brief Stops the timer. - * - * @param[in] gptp pointer to the @p GPTDriver object - * - * @notapi - */ -void gpt_lld_stop_timer(GPTDriver *gptp) -{ - gptp->gpt->IMR = 0; - gptp->gpt->TAILR = 0; - gptp->gpt->CTL &= ~GPTM_CTL_TAEN; -} - -/** - * @brief Starts the timer in one shot mode and waits for completion. - * @details This function specifically polls the timer waiting for completion - * in order to not have extra delays caused by interrupt servicing, - * this function is only recommended for short delays. - * - * @param[in] gptp pointer to the @p GPTDriver object - * @param[in] interval time interval in ticks - * - * @notapi - */ -void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) -{ - gptp->gpt->TAMR = GPTM_TAMR_TAMR_ONESHOT | GPTM_TAMR_TAILD | GPTM_TAMR_TASNAPS; - gptp->gpt->TAILR = interval - 1; - gptp->gpt->ICR = 0xffffffff; - gptp->gpt->CTL = GPTM_CTL_TAEN | GPTM_CTL_TASTALL; - while (!(gptp->gpt->RIS & GPTM_IMR_TATOIM)) - ; - gptp->gpt->ICR = 0xffffffff; -} - -#endif /* HAL_USE_GPT */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.h deleted file mode 100644 index e518e58..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_gpt_lld.h +++ /dev/null @@ -1,501 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/gpt_lld.h - * @brief TM4C123x/TM4C129x GPT subsystem low level driver header. - * - * @addtogroup GPT - * @{ - */ - -#ifndef HAL_GPT_LLD_H -#define HAL_GPT_LLD_H - -#if HAL_USE_GPT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief GPTD1 driver enable switch. - * @details If set to @p TRUE the support for GPTD1 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_GPT0) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_GPT0 FALSE -#endif - -/** - * @brief GPTD2 driver enable switch. - * @details If set to @p TRUE the support for GPTD2 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_GPT1) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_GPT1 FALSE -#endif - -/** - * @brief GPTD3 driver enable switch. - * @details If set to @p TRUE the support for GPTD3 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_GPT2) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_GPT2 FALSE -#endif - -/** - * @brief GPTD4 driver enable switch. - * @details If set to @p TRUE the support for GPTD4 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_GPT3) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_GPT3 FALSE -#endif - -/** - * @brief GPTD5 driver enable switch. - * @details If set to @p TRUE the support for GPTD5 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_GPT4) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_GPT4 FALSE -#endif - -/** - * @brief GPTD6 driver enable switch. - * @details If set to @p TRUE the support for GPTD6 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_GPT5) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_GPT5 FALSE -#endif - -/** - * @brief GPTD7 driver enable switch. - * @details If set to @p TRUE the support for GPTD1 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_WGPT0) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_WGPT0 FALSE -#endif - -/** - * @brief GPTD8 driver enable switch. - * @details If set to @p TRUE the support for GPTD2 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_WGPT1) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_WGPT1 FALSE -#endif - -/** - * @brief GPTD9 driver enable switch. - * @details If set to @p TRUE the support for GPTD3 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_WGPT2) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_WGPT2 FALSE -#endif - -/** - * @brief GPTD10 driver enable switch. - * @details If set to @p TRUE the support for GPTD4 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_WGPT3) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_WGPT3 FALSE -#endif - -/** - * @brief GPTD11 driver enable switch. - * @details If set to @p TRUE the support for GPTD5 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_WGPT4) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_WGPT4 FALSE -#endif - -/** - * @brief GPTD12 driver enable switch. - * @details If set to @p TRUE the support for GPTD6 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_GPT_USE_WGPT5) || defined(__DOXYGEN__) -#define TIVA_GPT_USE_WGPT5 FALSE -#endif - -/** - * @brief GPTD1 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_GPT0A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD2 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_GPT1A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD3 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_GPT2A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD4 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_GPT3A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD5 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_GPT4A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD6 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_GPT5A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD7 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_WGPT0A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD8 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_WGPT1A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD9 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_WGPT2A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD10 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_WGPT3A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD11 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_WGPT4A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#endif - -/** - * @brief GPTD12 interrupt priority level setting. - */ -#if !defined(TIVA_GPT_WGPT5A_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if TIVA_GPT_USE_GPT0 && !TIVA_HAS_GPT0 -#error "GPT0 not present in the selected device" -#endif - -#if TIVA_GPT_USE_GPT1 && !TIVA_HAS_GPT1 -#error "GPT1 not present in the selected device" -#endif - -#if TIVA_GPT_USE_GPT2 && !TIVA_HAS_GPT2 -#error "GPT2 not present in the selected device" -#endif - -#if TIVA_GPT_USE_GPT3 && !TIVA_HAS_GPT3 -#error "GPT3 not present in the selected device" -#endif - -#if TIVA_GPT_USE_GPT4 && !TIVA_HAS_GPT4 -#error "GPT4 not present in the selected device" -#endif - -#if TIVA_GPT_USE_GPT5 && !TIVA_HAS_GPT5 -#error "GPT5 not present in the selected device" -#endif - -#if TIVA_GPT_USE_WGPT0 && !TIVA_HAS_WGPT0 -#error "WGPT0 not present in the selected device" -#endif - -#if TIVA_GPT_USE_WGPT1 && !TIVA_HAS_WGPT1 -#error "WGPT1 not present in the selected device" -#endif - -#if TIVA_GPT_USE_WGPT2 && !TIVA_HAS_WGPT2 -#error "WGPT2 not present in the selected device" -#endif - -#if TIVA_GPT_USE_WGPT3 && !TIVA_HAS_WGPT3 -#error "WGPT3 not present in the selected device" -#endif - -#if TIVA_GPT_USE_WGPT4 && !TIVA_HAS_WGPT4 -#error "WGPT4 not present in the selected device" -#endif - -#if TIVA_GPT_USE_WGPT5 && !TIVA_HAS_WGPT5 -#error "WGPT5 not present in the selected device" -#endif - -#if !TIVA_GPT_USE_GPT0 && !TIVA_GPT_USE_GPT1 && !TIVA_GPT_USE_GPT2 && \ - !TIVA_GPT_USE_GPT3 && !TIVA_GPT_USE_GPT4 && !TIVA_GPT_USE_GPT5 && \ - !TIVA_GPT_USE_WGPT0 && !TIVA_GPT_USE_WGPT1 && !TIVA_GPT_USE_WGPT2 && \ - !TIVA_GPT_USE_WGPT3 && !TIVA_GPT_USE_WGPT4 && !TIVA_GPT_USE_WGPT5 -#error "GPT driver activated but no (W)GPT peripheral assigned" -#endif - -#if TIVA_GPT_USE_GPT0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_GPT0A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPT0" -#endif - -#if TIVA_GPT_USE_GPT1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_GPT1A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPT1" -#endif - -#if TIVA_GPT_USE_GPT2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_GPT2A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPT2" -#endif - -#if TIVA_GPT_USE_GPT3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_GPT3A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPT3" -#endif - -#if TIVA_GPT_USE_GPT4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_GPT4A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPT4" -#endif - -#if TIVA_GPT_USE_GPT5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_GPT5A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPT5" -#endif - -#if TIVA_GPT_USE_WGPT0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_WGPT0A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to WGPT0" -#endif - -#if TIVA_GPT_USE_WGPT1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_WGPT1A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to WGPT1" -#endif - -#if TIVA_GPT_USE_WGPT2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_WGPT2A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to WGPT2" -#endif - -#if TIVA_GPT_USE_WGPT3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_WGPT3A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to WGPT3" -#endif - -#if TIVA_GPT_USE_WGPT4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_WGPT4A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to WGPT4" -#endif - -#if TIVA_GPT_USE_WGPT5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_GPT_WGPT5A_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to WGPT5" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief GPT frequency type. - */ -typedef uint32_t gptfreq_t; - -/** - * @brief GPT counter type. - */ -typedef uint16_t gptcnt_t; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - gptfreq_t frequency; - /** - * @brief Timer callback pointer. - * @note This callback is invoked on GPT counter events. - */ - gptcallback_t callback; - /* End of the mandatory fields.*/ -} GPTConfig; - -/** - * @brief Structure representing a GPT driver. - */ -struct GPTDriver { - /** - * @brief Driver state. - */ - gptstate_t state; - /** - * @brief Current configuration data. - */ - const GPTConfig *config; -#if defined(GPT_DRIVER_EXT_FIELDS) - GPT_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the GPT registers block. - */ - GPT_TypeDef *gpt; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the interval of GPT peripheral. - * @details This function changes the interval of a running GPT unit. - * @pre The GPT unit must have been activated using @p gptStart(). - * @pre The GPT unit must have been running in continuous mode using - * @p gptStartContinuous(). - * @post The GPT unit interval is changed to the new value. - * @note The function has effect at the next cycle start. - * - * @param[in] gptp pointer to a @p GPTDriver object - * @param[in] interval new cycle time in timer ticks - * @notapi - */ -#define gpt_lld_change_interval(gptp, interval) { \ - gptp->gpt->TAILR = interval - 1; \ -} - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if TIVA_GPT_USE_GPT0 && !defined(__DOXYGEN__) -extern GPTDriver GPTD1; -#endif - -#if TIVA_GPT_USE_GPT1 && !defined(__DOXYGEN__) -extern GPTDriver GPTD2; -#endif - -#if TIVA_GPT_USE_GPT2 && !defined(__DOXYGEN__) -extern GPTDriver GPTD3; -#endif - -#if TIVA_GPT_USE_GPT3 && !defined(__DOXYGEN__) -extern GPTDriver GPTD4; -#endif - -#if TIVA_GPT_USE_GPT4 && !defined(__DOXYGEN__) -extern GPTDriver GPTD5; -#endif - -#if TIVA_GPT_USE_GPT5 && !defined(__DOXYGEN__) -extern GPTDriver GPTD6; -#endif - -#if TIVA_GPT_USE_WGPT0 && !defined(__DOXYGEN__) -extern GPTDriver GPTD7; -#endif - -#if TIVA_GPT_USE_WGPT1 && !defined(__DOXYGEN__) -extern GPTDriver GPTD8; -#endif - -#if TIVA_GPT_USE_WGPT2 && !defined(__DOXYGEN__) -extern GPTDriver GPTD9; -#endif - -#if TIVA_GPT_USE_WGPT3 && !defined(__DOXYGEN__) -extern GPTDriver GPTD10; -#endif - -#if TIVA_GPT_USE_WGPT4 && !defined(__DOXYGEN__) -extern GPTDriver GPTD11; -#endif - -#if TIVA_GPT_USE_WGPT5 && !defined(__DOXYGEN__) -extern GPTDriver GPTD12; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void gpt_lld_init(void); - void gpt_lld_start(GPTDriver *gptp); - void gpt_lld_stop(GPTDriver *gptp); - void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period); - void gpt_lld_stop_timer(GPTDriver *gptp); - void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_GPT */ - -#endif /* HAL_GPT_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.c deleted file mode 100644 index 5d80633..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.c +++ /dev/null @@ -1,854 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/i2c_lld.c - * @brief TM4C123x/TM4C129x I2C subsystem low level driver source. - * - * @addtogroup I2C - * @{ - */ - -#include "hal.h" - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief I2C0 driver identifier. - */ -#if TIVA_I2C_USE_I2C0 || defined(__DOXYGEN__) -I2CDriver I2CD1; -#endif - -/** - * @brief I2C1 driver identifier. - */ -#if TIVA_I2C_USE_I2C1 || defined(__DOXYGEN__) -I2CDriver I2CD2; -#endif - -/** - * @brief I2C2 driver identifier. - */ -#if TIVA_I2C_USE_I2C2 || defined(__DOXYGEN__) -I2CDriver I2CD3; -#endif - -/** - * @brief I2C3 driver identifier. - */ -#if TIVA_I2C_USE_I2C3 || defined(__DOXYGEN__) -I2CDriver I2CD4; -#endif - -/** - * @brief I2C4 driver identifier. - */ -#if TIVA_I2C_USE_I2C4 || defined(__DOXYGEN__) -I2CDriver I2CD5; -#endif - -/** - * @brief I2C5 driver identifier. - */ -#if TIVA_I2C_USE_I2C5 || defined(__DOXYGEN__) -I2CDriver I2CD6; -#endif - -/** - * @brief I2C6 driver identifier. - */ -#if TIVA_I2C_USE_I2C6 || defined(__DOXYGEN__) -I2CDriver I2CD7; -#endif - -/** - * @brief I2C7 driver identifier. - */ -#if TIVA_I2C_USE_I2C7 || defined(__DOXYGEN__) -I2CDriver I2CD8; -#endif - -/** - * @brief I2C8 driver identifier. - */ -#if TIVA_I2C_USE_I2C8 || defined(__DOXYGEN__) -I2CDriver I2CD9; -#endif - -/** - * @brief I2C9 driver identifier. - */ -#if TIVA_I2C_USE_I2C9 || defined(__DOXYGEN__) -I2CDriver I2CD10; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief I2C shared ISR code. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -static void i2c_lld_serve_interrupt(I2CDriver *i2cp) -{ - I2C_TypeDef *dp = i2cp->i2c; - uint32_t status; - - // clear MIS bit in MICR by writing 1 - dp->MICR = 1; - - // read interrupt status - status = dp->MCS; - - if (status & TIVA_MCS_ERROR) { - i2cp->errors |= I2C_BUS_ERROR; - } - if (status & TIVA_MCS_ARBLST) { - i2cp->errors |= I2C_ARBITRATION_LOST; - } - - if (i2cp->errors == I2C_NO_ERROR) { - // no error detected - switch(i2cp->intstate) { - case STATE_IDLE: { - _i2c_wakeup_isr(i2cp); - break; - } - case STATE_WRITE_NEXT: { - if (i2cp->txbytes == 1) { - i2cp->intstate = STATE_WRITE_FINAL; - } - dp->MDR = *(i2cp->txbuf); - i2cp->txbuf++; - i2cp->txbytes--; - // start transmission - dp->MCS = TIVA_I2C_BURST_SEND_CONTINUE; - break; - } - case STATE_WRITE_FINAL: { - if (i2cp->rxbytes == 0) { - i2cp->intstate = STATE_IDLE; - } - else if (i2cp->rxbytes == 1) { - i2cp->intstate = STATE_READ_ONE; - } - else { - i2cp->intstate = STATE_READ_FIRST; - } - dp->MDR = *(i2cp->txbuf); - i2cp->txbuf++; - // txbytes - 1 - i2cp->txbytes--; - // start transmission - dp->MCS = TIVA_I2C_BURST_SEND_FINISH; - break; - } - case STATE_WAIT_ACK: { - break; - } - case STATE_SEND_ACK: { - break; - } - case STATE_READ_ONE: { - i2cp->intstate = STATE_READ_WAIT; - // Initializes driver fields, LSB = 1 -> read. - i2cp->addr |= 1; - - // set slave address - dp->MSA = i2cp->addr; - i2cp->rxbytes--; - //start receiving - dp->MCS = TIVA_I2C_SINGLE_RECEIVE; - - break; - } - case STATE_READ_FIRST: { - if (i2cp->rxbytes == 2) { - i2cp->intstate = STATE_READ_FINAL; - } - else { - i2cp->intstate = STATE_READ_NEXT; - } - - // Initializes driver fields, LSB = 1 -> read. - i2cp->addr |= 1; - - // set slave address - dp->MSA = i2cp->addr; - i2cp->rxbytes--; - //start receiving - dp->MCS = TIVA_I2C_BURST_RECEIVE_START; - - break; - } - case STATE_READ_NEXT: { - if(i2cp->rxbytes == 2) { - i2cp->intstate = STATE_READ_FINAL; - } - *(i2cp->rxbuf) = dp->MDR; - i2cp->rxbuf++; - i2cp->rxbytes--; - //start receiving - dp->MCS = TIVA_I2C_BURST_RECEIVE_CONTINUE; - - break; - } - case STATE_READ_FINAL: { - i2cp->intstate = STATE_READ_WAIT; - *(i2cp->rxbuf) = dp->MDR; - i2cp->rxbuf++; - i2cp->rxbytes--; - //start receiving - dp->MCS = TIVA_I2C_BURST_RECEIVE_FINISH; - - break; - } - case STATE_READ_WAIT: { - i2cp->intstate = STATE_IDLE; - *(i2cp->rxbuf) = dp->MDR; - i2cp->rxbuf++; - _i2c_wakeup_isr(i2cp); - break; - } - } - } - else { - // error detected - _i2c_wakeup_error_isr(i2cp); - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_I2C_USE_I2C0 || defined(__DOXYGEN__) -/** - * @brief I2C0 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD1); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C0 */ - -#if TIVA_I2C_USE_I2C1 || defined(__DOXYGEN__) -/** - * @brief I2C1 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD2); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C1 */ - -#if TIVA_I2C_USE_I2C2 || defined(__DOXYGEN__) -/** - * @brief I2C2 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD3); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C2 */ - -#if TIVA_I2C_USE_I2C3 || defined(__DOXYGEN__) -/** - * @brief I2C3 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD4); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C3 */ - -#if TIVA_I2C_USE_I2C4 || defined(__DOXYGEN__) -/** - * @brief I2C4 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C4_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD5); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C4 */ - -#if TIVA_I2C_USE_I2C5 || defined(__DOXYGEN__) -/** - * @brief I2C5 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C5_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD6); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C5 */ - -#if TIVA_I2C_USE_I2C6 || defined(__DOXYGEN__) -/** - * @brief I2C6 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C6_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD7); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C6 */ - -#if TIVA_I2C_USE_I2C7 || defined(__DOXYGEN__) -/** - * @brief I2C7 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C7_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD8); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C7 */ - -#if TIVA_I2C_USE_I2C8 || defined(__DOXYGEN__) -/** - * @brief I2C8 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C8_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD9); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C8 */ - -#if TIVA_I2C_USE_I2C9 || defined(__DOXYGEN__) -/** - * @brief I2C9 interrupt handler. - * - * @notapi - */ -OSAL_IRQ_HANDLER(TIVA_I2C9_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - i2c_lld_serve_interrupt(&I2CD10); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_I2C_USE_I2C9 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level I2C driver initialization. - * - * @notapi - */ -void i2c_lld_init(void) { - -#if TIVA_I2C_USE_I2C0 - i2cObjectInit(&I2CD1); - I2CD1.thread = NULL; - I2CD1.i2c = I2C0; -#endif /* TIVA_I2C_USE_I2C0 */ - -#if TIVA_I2C_USE_I2C1 - i2cObjectInit(&I2CD2); - I2CD2.thread = NULL; - I2CD2.i2c = I2C1; -#endif /* TIVA_I2C_USE_I2C1 */ - -#if TIVA_I2C_USE_I2C2 - i2cObjectInit(&I2CD3); - I2CD3.thread = NULL; - I2CD3.i2c = I2C2; -#endif /* TIVA_I2C_USE_I2C2 */ - -#if TIVA_I2C_USE_I2C3 - i2cObjectInit(&I2CD4); - I2CD4.thread = NULL; - I2CD4.i2c = I2C3; -#endif /* TIVA_I2C_USE_I2C3 */ - -#if TIVA_I2C_USE_I2C4 - i2cObjectInit(&I2CD5); - I2CD5.thread = NULL; - I2CD5.i2c = I2C4; -#endif /* TIVA_I2C_USE_I2C4 */ - -#if TIVA_I2C_USE_I2C5 - i2cObjectInit(&I2CD6); - I2CD6.thread = NULL; - I2CD6.i2c = I2C5; -#endif /* TIVA_I2C_USE_I2C5 */ - -#if TIVA_I2C_USE_I2C6 - i2cObjectInit(&I2CD7); - I2CD7.thread = NULL; - I2CD7.i2c = I2C6; -#endif /* TIVA_I2C_USE_I2C6 */ - -#if TIVA_I2C_USE_I2C7 - i2cObjectInit(&I2CD8); - I2CD8.thread = NULL; - I2CD8.i2c = I2C7; -#endif /* TIVA_I2C_USE_I2C7 */ - -#if TIVA_I2C_USE_I2C8 - i2cObjectInit(&I2CD9); - I2CD9.thread = NULL; - I2CD9.i2c = I2C8; -#endif /* TIVA_I2C_USE_I2C8 */ - -#if TIVA_I2C_USE_I2C9 - i2cObjectInit(&I2CD10); - I2CD10.thread = NULL; - I2CD10.i2c = I2C9; -#endif /* TIVA_I2C_USE_I2C9 */ -} - -/** - * @brief Configures and activates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_start(I2CDriver *i2cp) -{ - I2C_TypeDef *dp = i2cp->i2c; - - /* If in stopped state then enables the I2C clocks.*/ - if (i2cp->state == I2C_STOP) { -#if TIVA_I2C_USE_I2C0 - if (&I2CD1 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 0); - nvicEnableVector(TIVA_I2C0_NUMBER, TIVA_I2C_I2C0_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C0 */ - -#if TIVA_I2C_USE_I2C1 - if (&I2CD2 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 1); - nvicEnableVector(TIVA_I2C1_NUMBER, TIVA_I2C_I2C1_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C1 */ - -#if TIVA_I2C_USE_I2C2 - if (&I2CD3 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 2); - nvicEnableVector(TIVA_I2C2_NUMBER, TIVA_I2C_I2C2_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C2 */ - -#if TIVA_I2C_USE_I2C3 - if (&I2CD4 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 3); - nvicEnableVector(TIVA_I2C3_NUMBER, TIVA_I2C_I2C3_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C3 */ - -#if TIVA_I2C_USE_I2C4 - if (&I2CD5 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 4); - nvicEnableVector(TIVA_I2C4_NUMBER, TIVA_I2C_I2C4_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C4 */ - -#if TIVA_I2C_USE_I2C5 - if (&I2CD6 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 5); - nvicEnableVector(TIVA_I2C5_NUMBER, TIVA_I2C_I2C5_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C5 */ - -#if TIVA_I2C_USE_I2C6 - if (&I2CD7 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 6); - nvicEnableVector(TIVA_I2C6_NUMBER, TIVA_I2C_I2C6_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C6 */ - -#if TIVA_I2C_USE_I2C7 - if (&I2CD8 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 7); - nvicEnableVector(TIVA_I2C7_NUMBER, TIVA_I2C_I2C7_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C7 */ - -#if TIVA_I2C_USE_I2C8 - if (&I2CD9 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 8); - nvicEnableVector(TIVA_I2C8_NUMBER, TIVA_I2C_I2C8_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C7 */ - -#if TIVA_I2C_USE_I2C9 - if (&I2CD10 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 9); - nvicEnableVector(TIVA_I2C9_NUMBER, TIVA_I2C_I2C9_IRQ_PRIORITY); - } -#endif /* TIVA_I2C_USE_I2C7 */ - } - - dp->MCR = 0x10; - dp->MTPR = MTPR_VALUE; -} - -/** - * @brief Deactivates the I2C peripheral. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -void i2c_lld_stop(I2CDriver *i2cp) -{ - I2C_TypeDef *dp = i2cp->i2c; - /* If not in stopped state then disables the I2C clock.*/ - if (i2cp->state != I2C_STOP) { - - /* I2C disable.*/ - // TODO: abort i2c operation - //i2c_lld_abort_operation(i2cp); - -#if TIVA_I2C_USE_I2C0 - if (&I2CD1 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 0); - nvicDisableVector(TIVA_I2C0_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C0 */ - -#if TIVA_I2C_USE_I2C1 - if (&I2CD2 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 1); - nvicDisableVector(TIVA_I2C1_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C1 */ - -#if TIVA_I2C_USE_I2C2 - if (&I2CD3 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 2); - nvicDisableVector(TIVA_I2C2_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C2 */ - -#if TIVA_I2C_USE_I2C3 - if (&I2CD4 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 3); - nvicDisableVector(TIVA_I2C3_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C3 */ - -#if TIVA_I2C_USE_I2C4 - if (&I2CD5 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 4); - nvicDisableVector(TIVA_I2C4_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C4 */ - -#if TIVA_I2C_USE_I2C5 - if (&I2CD6 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 5); - nvicDisableVector(TIVA_I2C5_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C5 */ - -#if TIVA_I2C_USE_I2C6 - if (&I2CD7 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 6); - nvicDisableVector(TIVA_I2C6_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C6 */ - -#if TIVA_I2C_USE_I2C7 - if (&I2CD8 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 7); - nvicDisableVector(TIVA_I2C7_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C7 */ - -#if TIVA_I2C_USE_I2C8 - if (&I2CD9 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 8); - nvicDisableVector(TIVA_I2C8_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C8 */ - -#if TIVA_I2C_USE_I2C9 - if (&I2CD10 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 9); - nvicDisableVector(TIVA_I2C9_NUMBER); - } -#endif /* TIVA_I2C_USE_I2C9 */ - - dp->MCR = 0; - dp->MTPR = 0; - } -} - -/** - * @brief Receives data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] addr slave device address - * @param[out] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_INFINITE no timeout. - * . - * @return The operation status. - * @retval RDY_OK if the function succeeded. - * @retval RDY_RESET if one or more I2C errors occurred, the errors can - * be retrieved using @p i2cGetErrors(). - * @retval RDY_TIMEOUT if a timeout occurred before operation end. After a - * timeout the driver must be stopped and restarted - * because the bus is in an uncertain state. - * - * @notapi - */ -msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) -{ - I2C_TypeDef *dp = i2cp->i2c; - systime_t start, end; - - i2cp->rxbuf = rxbuf; - i2cp->rxbytes = rxbytes; - - /* Resetting error flags for this transfer.*/ - i2cp->errors = I2C_NO_ERROR; - - /* Initializes driver fields, LSB = 1 -> receive.*/ - i2cp->addr = (addr << 1) | 0x01; - - /* Releases the lock from high level driver.*/ - osalSysUnlock(); - - /* Calculating the time window for the timeout on the busy bus condition.*/ - start = osalOsGetSystemTimeX(); - end = start + OSAL_MS2ST(TIVA_I2C_BUSY_TIMEOUT); - - /* Waits until BUSY flag is reset or, alternatively, for a timeout - condition.*/ - while (true) { - osalSysLock(); - - /* If the bus is not busy then the operation can continue, note, the - loop is exited in the locked state.*/ - if ((dp->MCS & TIVA_MCS_BUSY) == 0) - break; - - /* If the system time went outside the allowed window then a timeout - condition is returned.*/ - if (!osalOsIsTimeWithinX(osalOsGetSystemTimeX(), start, end)) - return MSG_TIMEOUT; - - osalSysUnlock(); - } - - /* set slave address */ - dp->MSA = addr; - - /* Starts the operation.*/ - dp->MCS = TIVA_I2C_SINGLE_RECEIVE; - - /* Waits for the operation completion or a timeout.*/ - return osalThreadSuspendTimeoutS(&i2cp->thread, timeout); -} - -/** - * @brief Transmits data via the I2C bus as master. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * @param[in] addr slave device address - * @param[in] txbuf pointer to the transmit buffer - * @param[in] txbytes number of bytes to be transmitted - * @param[out] rxbuf pointer to the receive buffer - * @param[in] rxbytes number of bytes to be received - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_INFINITE no timeout. - * . - * @return The operation status. - * @retval RDY_OK if the function succeeded. - * @retval RDY_RESET if one or more I2C errors occurred, the errors can - * be retrieved using @p i2cGetErrors(). - * @retval RDY_TIMEOUT if a timeout occurred before operation end. After a - * timeout the driver must be stopped and restarted - * because the bus is in an uncertain state. - * - * @notapi - */ -msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout) -{ - I2C_TypeDef *dp = i2cp->i2c; - systime_t start, end; - - i2cp->rxbuf = rxbuf; - i2cp->rxbytes = rxbytes; - i2cp->txbuf = txbuf; - i2cp->txbytes = txbytes; - - /* Resetting error flags for this transfer.*/ - i2cp->errors = I2C_NO_ERROR; - - /* Releases the lock from high level driver.*/ - osalSysUnlock(); - - /* Calculating the time window for the timeout on the busy bus condition.*/ - start = osalOsGetSystemTimeX(); - end = start + OSAL_MS2ST(TIVA_I2C_BUSY_TIMEOUT); - - /* Waits until BUSY flag is reset or, alternatively, for a timeout - condition.*/ - while (true) { - osalSysLock(); - - /* If the bus is not busy then the operation can continue, note, the - loop is exited in the locked state.*/ - if ((dp->MCS & TIVA_MCS_BUSY) == 0) - break; - - /* If the system time went outside the allowed window then a timeout - condition is returned.*/ - if (!osalOsIsTimeWithinX(osalOsGetSystemTimeX(), start, end)) - return MSG_TIMEOUT; - - osalSysUnlock(); - } - - /* Initializes driver fields, LSB = 0 -> write.*/ - i2cp->addr = addr << 1 | 0; - - /* set slave address */ - dp->MSA = i2cp->addr; - - /* enable interrupts */ - dp->MIMR = TIVA_MIMR_IM; - - /* put data in register */ - dp->MDR = *(i2cp->txbuf); - - /* check if 1 or more bytes */ - if (i2cp->txbytes == 1) { - if (i2cp->rxbytes == 1) { - // one byte read - i2cp->intstate = STATE_READ_ONE; - } - else { - // multiple byte read - i2cp->intstate = STATE_READ_FIRST; - } - // single byte send - dp->MCS = TIVA_I2C_SIGNLE_SEND; - } - else { - if (i2cp->txbytes == 2) { - // 2 bytes - i2cp->intstate = STATE_WRITE_FINAL; - } - else { - // more then 2 bytes - i2cp->intstate = STATE_WRITE_NEXT; - } - // multiple bytes start send - dp->MCS = TIVA_I2C_BURST_SEND_START; - } - - i2cp->txbuf++; - i2cp->txbytes--; - - /* Waits for the operation completion or a timeout.*/ - return osalThreadSuspendTimeoutS(&i2cp->thread, timeout); -} - -#endif /* HAL_USE_I2C */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.h deleted file mode 100644 index 460d231..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_i2c_lld.h +++ /dev/null @@ -1,527 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/i2c_lld.h - * @brief TM4C123x/TM4C129x I2C subsystem low level driver header. - * - * @addtogroup I2C - * @{ - */ - -#ifndef HAL_I2C_LLD_H -#define HAL_I2C_LLD_H - -#if HAL_USE_I2C || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define MTPR_VALUE ((TIVA_SYSCLK/(2*(6+4)*i2cp->config->clock_speed))-1) - -#define TIVA_MSA_RS (1 << 0) -#define TIVA_MSA_SA (127 << 1) - -#define TIVA_MCS_BUSY (1 << 0) -#define TIVA_MCS_ERROR (1 << 1) -#define TIVA_MCS_ADRACK (1 << 2) -#define TIVA_MCS_DATACK (1 << 3) -#define TIVA_MCS_ARBLST (1 << 4) -#define TIVA_MCS_IDLE (1 << 5) -#define TIVA_MCS_BUSBSY (1 << 6) -#define TIVA_MCS_CLKTO (1 << 7) - -#define TIVA_MCS_RUN (1 << 0) -#define TIVA_MCS_START (1 << 1) -#define TIVA_MCS_STOP (1 << 2) -#define TIVA_MCS_ACK (1 << 3) -#define TIVA_MCS_HS (1 << 4) - -#define TIVA_I2C_SIGNLE_SEND (TIVA_MCS_RUN | TIVA_MCS_START | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_SEND_START (TIVA_MCS_RUN | TIVA_MCS_START) -#define TIVA_I2C_BURST_SEND_CONTINUE (TIVA_MCS_RUN) -#define TIVA_I2C_BURST_SEND_FINISH (TIVA_MCS_RUN | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_SEND_STOP (TIVA_MCS_STOP) -#define TIVA_I2C_BURST_SEND_ERROR_STOP (TIVA_MCS_STOP) - -#define TIVA_I2C_SINGLE_RECEIVE (TIVA_MCS_RUN | TIVA_MCS_START | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_RECEIVE_START (TIVA_MCS_RUN | TIVA_MCS_START | TIVA_MCS_ACK) -#define TIVA_I2C_BURST_RECEIVE_CONTINUE (TIVA_MCS_RUN | TIVA_MCS_ACK) -#define TIVA_I2C_BURST_RECEIVE_FINISH (TIVA_MCS_RUN | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_RECEIVE_ERROR_STOP (TIVA_MCS_STOP) - -#define TIVA_MDR_DATA (255 << 0) - -#define TIVA_MTPR_TPR (127 << 0) -#define TIVA_MTPR_HS (1 << 7) - -#define TIVA_MIMR_IM (1 << 0) -#define TIVA_MIMR_CLKIM (1 << 1) - -#define TIVA_MRIS_RIS (1 << 0) -#define TIVA_MRIS_CLKRIS (1 << 1) - -#define TIVA_MMIS_MIS (1 << 0) -#define TIVA_MMIS_CLKMIS (1 << 1) - -#define TIVA_MICR_IC (1 << 0) -#define TIVA_MICR_CLKIC (1 << 1) - -#define TIVA_MCR_LPBK (1 << 0) -#define TIVA_MCR_MFE (1 << 4) -#define TIVA_MCR_SFE (1 << 5) -#define TIVA_MCR_GFE (1 << 6) - -#define TIVA_MCLKOCNT_CNTL (255 << 0) - -#define TIVA_MBMON_SCL (1 << 0) -#define TIVA_MBMON_SDA (1 << 1) - -#define TIVA_MCR2_GFPW (7 << 4) - -// interrupt states -#define STATE_IDLE 0 -#define STATE_WRITE_NEXT 1 -#define STATE_WRITE_FINAL 2 -#define STATE_WAIT_ACK 3 -#define STATE_SEND_ACK 4 -#define STATE_READ_ONE 5 -#define STATE_READ_FIRST 6 -#define STATE_READ_NEXT 7 -#define STATE_READ_FINAL 8 -#define STATE_READ_WAIT 9 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief I2C0 driver enable switch. - * @details If set to @p TRUE the support for I2C0 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C0) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C0 FALSE -#endif - -/** - * @brief I2C1 driver enable switch. - * @details If set to @p TRUE the support for I2C1 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C1) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C1 FALSE -#endif - -/** - * @brief I2C2 driver enable switch. - * @details If set to @p TRUE the support for I2C2 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C2) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C2 FALSE -#endif - -/** - * @brief I2C3 driver enable switch. - * @details If set to @p TRUE the support for I2C3 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C3) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C3 FALSE -#endif - -/** - * @brief I2C4 driver enable switch. - * @details If set to @p TRUE the support for I2C4 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C4) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C4 FALSE -#endif - -/** - * @brief I2C5 driver enable switch. - * @details If set to @p TRUE the support for I2C5 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C5) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C5 FALSE -#endif - -/** - * @brief I2C6 driver enable switch. - * @details If set to @p TRUE the support for I2C6 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C6) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C6 FALSE -#endif - -/** - * @brief I2C7 driver enable switch. - * @details If set to @p TRUE the support for I2C7 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C7) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C7 FALSE -#endif - -/** - * @brief I2C8 driver enable switch. - * @details If set to @p TRUE the support for I2C8 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C8) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C8 FALSE -#endif - -/** - * @brief I2C9 driver enable switch. - * @details If set to @p TRUE the support for I2C9 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_I2C_USE_I2C9) || defined(__DOXYGEN__) -#define TIVA_I2C_USE_I2C9 FALSE -#endif - -/** - * @brief I2C timeout on busy condition in milliseconds. - */ -#if !defined(TIVA_I2C_BUSY_TIMEOUT) || defined(__DOXYGEN__) -#define TIVA_I2C_BUSY_TIMEOUT 50 -#endif - -/** - * @brief I2C0 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C1 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C2 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C3 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C4 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C5 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C6 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C6_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C7 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C7_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C8 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C8_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 -#endif - -/** - * @brief I2C9 interrupt priority level setting. - */ -#if !defined(TIVA_I2C_I2C9_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/** - * @brief error checks - */ -#if !TIVA_I2C_USE_I2C0 && !TIVA_I2C_USE_I2C1 && !TIVA_I2C_USE_I2C2 && \ - !TIVA_I2C_USE_I2C3 && !TIVA_I2C_USE_I2C4 && !TIVA_I2C_USE_I2C5 && \ - !TIVA_I2C_USE_I2C6 && !TIVA_I2C_USE_I2C7 && !TIVA_I2C_USE_I2C8 && \ - !TIVA_I2C_USE_I2C9 -#error "I2C driver activated but no I2C peripheral assigned" -#endif - -#if TIVA_I2C_USE_I2C0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C0" -#endif - -#if TIVA_I2C_USE_I2C1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C1" -#endif - -#if TIVA_I2C_USE_I2C2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C2" -#endif - -#if TIVA_I2C_USE_I2C3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C3" -#endif - -#if TIVA_I2C_USE_I2C4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C4" -#endif - -#if TIVA_I2C_USE_I2C5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C5" -#endif - -#if TIVA_I2C_USE_I2C6 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C6_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C6" -#endif - -#if TIVA_I2C_USE_I2C7 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C7_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C7" -#endif - -#if TIVA_I2C_USE_I2C8 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C8_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C8" -#endif - -#if TIVA_I2C_USE_I2C9 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_I2C_I2C9_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to I2C9" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type representing I2C address. - */ -typedef uint16_t i2caddr_t; - -/** - * @brief I2C Driver condition flags type. - */ -typedef uint32_t i2cflags_t; - -/** - * @brief Driver configuration structure. - */ -typedef struct -{ - /** - * @brief Specifies the clock frequency. - * @note Must be set to a value lower than 3.33Mbps. - * TODO: high-speed mode: 3333 kHz. setup is 100-400-1000 kHz then switched to 3333 kHz - */ - uint32_t clock_speed; -} I2CConfig; - -/** - * @brief Type of a structure representing an I2C driver. - */ -typedef struct I2CDriver I2CDriver; - -/** - * @brief Structure representing an I2C driver. - */ -struct I2CDriver { - /** - * @brief Driver state. - */ - i2cstate_t state; - /** - * @brief Current configuration data. - */ - const I2CConfig *config; - /** - * @brief Error flags. - */ - i2cflags_t errors; -#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#endif /* I2C_USE_MUTUAL_EXCLUSION */ -#if defined(I2C_DRIVER_EXT_FIELDS) - I2C_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Thread waiting for I/O completion. - */ - thread_reference_t thread; - /** - * @brief Current slave address without R/W bit. - */ - i2caddr_t addr; - /** - * @brief Pointer to the buffer with data to send. - */ - const uint8_t *txbuf; - /** - * @brief Number of bytes of data to send. - */ - size_t txbytes; - /** - * @brief Pointer to the buffer to put received data. - */ - uint8_t *rxbuf; - /** - * @brief Number of bytes of data to receive. - */ - size_t rxbytes; - /** - * @brief State of the interrupt state machine. - * - * TODO is it possible to remove the interrupt state? - */ - uint8_t intstate; - /** - * @brief Pointer to the I2Cx registers block. - */ - I2C_TypeDef *i2c; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Get errors from I2C driver. - * - * @param[in] i2cp pointer to the @p I2CDriver object - * - * @notapi - */ -#define i2c_lld_get_errors(i2cp) ((i2cp)->errors) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -#if TIVA_I2C_USE_I2C0 -extern I2CDriver I2CD1; -#endif - -#if TIVA_I2C_USE_I2C1 -extern I2CDriver I2CD2; -#endif - -#if TIVA_I2C_USE_I2C2 -extern I2CDriver I2CD3; -#endif - -#if TIVA_I2C_USE_I2C3 -extern I2CDriver I2CD4; -#endif - -#if TIVA_I2C_USE_I2C4 -extern I2CDriver I2CD5; -#endif - -#if TIVA_I2C_USE_I2C5 -extern I2CDriver I2CD6; -#endif - -#if TIVA_I2C_USE_I2C6 -extern I2CDriver I2CD7; -#endif - -#if TIVA_I2C_USE_I2C7 -extern I2CDriver I2CD8; -#endif - -#if TIVA_I2C_USE_I2C8 -extern I2CDriver I2CD9; -#endif - -#if TIVA_I2C_USE_I2C9 -extern I2CDriver I2CD10; -#endif - -#endif /* !defined(__DOXYGEN__) */ - -#ifdef __cplusplus -extern "C" { -#endif - void i2c_lld_init(void); - void i2c_lld_start(I2CDriver *i2cp); - void i2c_lld_stop(I2CDriver *i2cp); - msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, - const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout); - msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, - uint8_t *rxbuf, size_t rxbytes, - systime_t timeout); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_I2C */ - -#endif /* HAL_I2C_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.c deleted file mode 100644 index 04177b6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.c +++ /dev/null @@ -1,823 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/mac_lld.c - * @brief MAC Driver subsystem low level driver source. - * - * @addtogroup MAC - * @{ - */ - -#include - -#include "hal.h" - -#if HAL_USE_MAC || defined(__DOXYGEN__) - -#include "hal_mii.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define BUFFER_SIZE ((((TIVA_MAC_BUFFERS_SIZE - 1) | 3) + 1) / 4) - -/* MII divider optimal value.*/ -#if (TIVA_SYSCLK >= 100000000) -#define MACMIIADDR_CR (0x01 << 2) -#elif (TIVA_SYSCLK >= 60000000) -#define MACMIIADDR_CR (0x00 << 2) -#elif (TIVA_SYSCLK >= 35000000) -#define MACMIIADDR_CR (0x03 << 2) -#elif (TIVA_SYSCLK >= 20000000) -#define MACMIIADDR_CR (0x02 << 2) -#else -#error "TIVA_SYSCLK below minimum frequency for ETH operations (20MHz)" -#endif - -#define EMAC_MIIADDR_MIIW 0x00000002 /* MII Write */ -#define EMAC_MIIADDR_MIIB 0x00000001 /* MII Busy */ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief Ethernet driver 1. - */ -MACDriver ETHD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -static const uint8_t default_mac_address[] = {0xAA, 0x55, 0x13, - 0x37, 0x01, 0x10}; - -static tiva_eth_rx_descriptor_t rd[TIVA_MAC_RECEIVE_BUFFERS]; -static tiva_eth_tx_descriptor_t td[TIVA_MAC_TRANSMIT_BUFFERS]; - -static uint32_t rb[TIVA_MAC_RECEIVE_BUFFERS][BUFFER_SIZE]; -static uint32_t tb[TIVA_MAC_TRANSMIT_BUFFERS][BUFFER_SIZE]; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Writes a PHY register. - * - * @param[in] macp pointer to the @p MACDriver object - * @param[in] reg register number - * @param[in] value new register value - * - * @notapi - */ -static void mii_write(MACDriver *macp, uint32_t reg, uint32_t value) -{ - ETH->MIIDATA = value; - ETH->MIIADDR = macp->phyaddr | (reg << 6) | MACMIIADDR_CR | EMAC_MIIADDR_MIIW | EMAC_MIIADDR_MIIB; - - while ((ETH->MIIADDR & EMAC_MIIADDR_MIIB) != 0) - ; -} - -/** - * @brief Writes an extended PHY register. - * - * @param[in] macp pointer to the @p MACDriver object - * @param[in] reg register number - * @param[in] value new register value - * - * @notapi - */ -static void mii_write_extended(MACDriver *macp, uint32_t reg, uint32_t value) -{ - mii_write(macp, TIVA_REGCTL, 0x001F); - mii_write(macp, TIVA_ADDAR, reg); - - mii_write(macp, TIVA_REGCTL, 0x401F); - mii_write(macp, TIVA_ADDAR, value); -} - -/** - * @brief Reads a PHY register. - * - * @param[in] macp pointer to the @p MACDriver object - * @param[in] reg register number - * - * @return The PHY register content. - * - * @notapi - */ -static uint32_t mii_read(MACDriver *macp, uint32_t reg) -{ - ETH->MIIADDR = macp->phyaddr | (reg << 6) | MACMIIADDR_CR | EMAC_MIIADDR_MIIB; - - while ((ETH->MIIADDR & EMAC_MIIADDR_MIIB) != 0) - ; - - return ETH->MIIDATA; -} - -/** - * @brief Reads an extended PHY register. - * - * @param[in] macp pointer to the @p MACDriver object - * @param[in] reg register number - * - * @return The extended PHY register content. - * - * @notapi - */ -static uint32_t mii_read_extended(MACDriver *macp, uint32_t reg) -{ - mii_write(macp, TIVA_REGCTL, 0x001F); - mii_write(macp, TIVA_ADDAR, reg); - - mii_write(macp, TIVA_REGCTL, 0x401F); - return mii_read(macp, TIVA_ADDAR); -} - -#if !defined(BOARD_PHY_ADDRESS) -/** - * @brief PHY address detection. - * - * @param[in] macp pointer to the @p MACDriver object - */ -static void mii_find_phy(MACDriver *macp) -{ - uint32_t i; - -#if TIVA_MAC_PHY_TIMEOUT > 0 - rtcnt_t start = chSysGetRealtimeCounterX(); - rtcnt_t timeout = start + MS2RTC(STM32_HCLK,STM32_MAC_PHY_TIMEOUT); - rtcnt_t time = start; - while (chSysIsCounterWithinX(time, start, timeout)) { -#endif - for (i = 0; i < 31; i++) { - macp->phyaddr = i << 11; - ETH->MIIDATA = (i << 6) | MACMIIADDR_CR; - if ((mii_read(macp, TIVA_ID1) == (BOARD_PHY_ID >> 16)) && - ((mii_read(macp, TIVA_ID2) & 0xFFF0) == (BOARD_PHY_ID & 0xFFF0))) { - return; - } - } -#if TIVA_MAC_PHY_TIMEOUT > 0 - time = chSysGetRealtimeCounterX(); - } -#endif - /* Wrong or defective board.*/ - osalSysHalt("MAC failure"); -} -#endif - -/** - * @brief MAC address setup. - * - * @param[in] p pointer to a six bytes buffer containing the MAC - * address - */ -static void mac_lld_set_address(const uint8_t *p) -{ - /* MAC address configuration, only a single address comparator is used, - hash table not used.*/ - ETH->ADDR0H = ((uint32_t)p[5] << 8) | - ((uint32_t)p[4] << 0); - ETH->ADDR0L = ((uint32_t)p[3] << 24) | - ((uint32_t)p[2] << 16) | - ((uint32_t)p[1] << 8) | - ((uint32_t)p[0] << 0); - ETH->ADDR1H = 0x0000FFFF; - ETH->ADDR1L = 0xFFFFFFFF; - ETH->ADDR2H = 0x0000FFFF; - ETH->ADDR2L = 0xFFFFFFFF; - ETH->ADDR3H = 0x0000FFFF; - ETH->ADDR3L = 0xFFFFFFFF; - ETH->HASHTBLH = 0; - ETH->HASHTBLL = 0; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -CH_IRQ_HANDLER(TIVA_MAC_HANDLER) -{ - uint32_t dmaris; - - CH_IRQ_PROLOGUE(); - - dmaris = ETH->DMARIS; - ETH->DMARIS = dmaris & 0x0001FFFF; /* Clear status bits.*/ - - if (dmaris & (1 << 6)) { - /* Data Received.*/ - osalSysLockFromISR(); - osalThreadDequeueAllI(ÐD1.rdqueue, MSG_RESET); -#if MAC_USE_EVENTS - osalEventBroadcastFlagsI(ÐD1.rdevent, 0); -#endif - osalSysUnlockFromISR(); - } - - if (dmaris & (1 << 0)) { - /* Data Transmitted.*/ - osalSysLockFromISR(); - osalThreadDequeueAllI(ÐD1.tdqueue, MSG_RESET); - osalSysUnlockFromISR(); - } - - CH_IRQ_EPILOGUE(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level MAC initialization. - * - * @notapi - */ -void mac_lld_init(void) -{ - uint8_t i; - - macObjectInit(ÐD1); - ETHD1.link_up = false; - - /* Descriptor tables are initialized in chained mode, note that the first - word is not initialized here but in mac_lld_start().*/ - for (i = 0; i < TIVA_MAC_RECEIVE_BUFFERS; i++) { - rd[i].rdes1 = TIVA_RDES1_RCH | TIVA_RDES1_RBS1(TIVA_MAC_BUFFERS_SIZE); - rd[i].rdes2 = (uint32_t)rb[i]; - rd[i].rdes3 = (uint32_t)&rd[(i + 1) % TIVA_MAC_RECEIVE_BUFFERS]; - } - for (i = 0; i < TIVA_MAC_TRANSMIT_BUFFERS; i++) { - td[i].tdes1 = 0; - td[i].tdes2 = (uint32_t)tb[i]; - td[i].tdes3 = (uint32_t)&td[(i + 1) % TIVA_MAC_TRANSMIT_BUFFERS]; - } - - /* Enable MAC clock */ - SYSCTL->RCGCEMAC = 1; - while (SYSCTL->PREMAC != 0x01) - ; - - /* Set PHYHOLD bit */ - ETH->PC |= 1; - - /* Enable PHY clock */ - SYSCTL->RCGCEPHY = 1; - while (SYSCTL->PREPHY != 0x01) - ; - - /* Enable power to PHY */ - SYSCTL->PCEPHY |= 1; - while (SYSCTL->PREPHY != 0x01) - ; -#if BOARD_PHY_RMII - ETH->PC = EMAC_PHY_CONFIG | (0x04 << 28); -#else - ETH->PC = EMAC_PHY_CONFIG; -#endif - - /* - * Write OHY led configuration. - * 0: link ok - * 1: tx activity - * 2: link ok - * blink rate: 20Hz - */ - mii_write_extended(ÐD1, TIVA_LEDCFG, (0 << 8) | (2 << 4) | (0 << 0)); - mii_write(ÐD1, TIVA_LEDCR, (0 << 9)); - - /* Set done bit after writing EMACPC register */ - mii_write(ÐD1, TIVA_CFG1, (1 << 15) | mii_read(ÐD1, TIVA_CFG1)); - - while(ETH->DMABUSMOD & 1) - ; - - /* Reset MAC */ - ETH->DMABUSMOD |= 1; - while (ETH->DMABUSMOD & 1) - ; - - /* PHY address setup.*/ -#if defined(BOARD_PHY_ADDRESS) - ETHD1.phyaddr = BOARD_PHY_ADDRESS << 11; -#else - mii_find_phy(ÐD1); -#endif - -#if defined(BOARD_PHY_RESET) - /* PHY board-specific reset procedure.*/ - BOARD_PHY_RESET(); -#else - /* PHY soft reset procedure.*/ - mii_write(ÐD1, MII_BMCR, BMCR_RESET); -#if defined(BOARD_PHY_RESET_DELAY) - chSysPolledDelayX(BOARD_PHY_RESET_DELAY); -#endif - while (mii_read(ÐD1, MII_BMCR) & BMCR_RESET) - ; -#endif - -#if TIVA_MAC_CHANGE_PHY_STATE - /* PHY in power down mode until the driver will be started.*/ - mii_write(ÐD1, MII_BMCR, mii_read(ÐD1, MII_BMCR) | BMCR_PDOWN); -#endif - - /* Disable MAC clock */ - SYSCTL->RCGCEMAC = 0; - - /* Disable PHY clock */ - SYSCTL->RCGCEPHY = 0; -} - -/** - * @brief Configures and activates the MAC peripheral. - * - * @param[in] macp pointer to the @p MACDriver object - * - * @notapi - */ -void mac_lld_start(MACDriver *macp) -{ - uint8_t i; - - /* Resets the state of all descriptors.*/ - for (i = 0; i < TIVA_MAC_RECEIVE_BUFFERS; i++) { - rd[i].rdes0 = TIVA_RDES0_OWN; - } - macp->rxptr = (tiva_eth_rx_descriptor_t *)rd; - - for (i = 0; i < TIVA_MAC_TRANSMIT_BUFFERS; i++) { - td[i].tdes0 = TIVA_TDES0_TCH; - td[i].locked = 0; - } - macp->txptr = (tiva_eth_tx_descriptor_t *)td; - - /* Enable MAC clock */ - SYSCTL->RCGCEMAC = 1; - while (SYSCTL->PREMAC != 0x01) - ; - - /* Enable PHY clock */ - SYSCTL->RCGCEPHY = 1; - while (!SYSCTL->PREPHY) - ; - - /* ISR vector enabled.*/ - nvicEnableVector(TIVA_MAC_NUMBER, TIVA_MAC_IRQ_PRIORITY); - -#if TIVA_MAC_CHANGE_PHY_STATE - /* PHY in power up mode.*/ - mii_write(macp, MII_BMCR, mii_read(macp, MII_BMCR) & ~BMCR_PDOWN); -#endif - - /* MAC configuration.*/ - ETH->FRAMEFLTR = 0; - ETH->FLOWCTL = 0; - ETH->VLANTG = 0; - - /* MAC address setup.*/ - if (macp->config->mac_address == NULL) - mac_lld_set_address(default_mac_address); - else - mac_lld_set_address(macp->config->mac_address); - - /* Transmitter and receiver enabled. - Note that the complete setup of the MAC is performed when the link - status is detected.*/ -#if TIVA_MAC_IP_CHECKSUM_OFFLOAD - ETH->CFG = (1 << 10) | (1 << 3) | (1 << 2); -#else - ETH->CFG = (1 << 3) | (1 << 2); -#endif - - /* DMA configuration: - Descriptor chains pointers.*/ - ETH->RXDLADDR = (uint32_t)rd; - ETH->TXDLADDR = (uint32_t)td; - - /* Enabling required interrupt sources.*/ - ETH->DMARIS &= 0xFFFF; - ETH->DMAIM = (1 << 16) | (1 << 6) | (1 << 0); - - /* DMA general settings.*/ - ETH->DMABUSMOD = (1 << 25) | (1 << 17) | (1 << 8); - - /* Transmit FIFO flush.*/ - ETH->DMAOPMODE = (1 << 20); - while (ETH->DMAOPMODE & (1 << 20)) - ; - - /* DMA final configuration and start.*/ - ETH->DMAOPMODE = (1 << 26) | (1 << 25) | (1 << 21) | - (1 << 13) | (1 << 1); -} - -/** - * @brief Deactivates the MAC peripheral. - * - * @param[in] macp pointer to the @p MACDriver object - * - * @notapi - */ -void mac_lld_stop(MACDriver *macp) -{ - if (macp->state != MAC_STOP) { -#if TIVA_MAC_CHANGE_PHY_STATE - /* PHY in power down mode until the driver will be restarted.*/ - mii_write(macp, MII_BMCR, mii_read(macp, MII_BMCR) | BMCR_PDOWN); -#endif - - /* MAC and DMA stopped.*/ - ETH->CFG = 0; - ETH->DMAOPMODE = 0; - ETH->DMAIM = 0; - ETH->DMARIS &= 0xFFFF; - - /* MAC clocks stopped.*/ - SYSCTL->RCGCEMAC = 0; - - /* PHY clock stopped.*/ - SYSCTL->RCGCEPHY = 0; - - /* ISR vector disabled.*/ - nvicDisableVector(TIVA_MAC_NUMBER); - } -} - -/** - * @brief Returns a transmission descriptor. - * @details One of the available transmission descriptors is locked and - * returned. - * - * @param[in] macp pointer to the @p MACDriver object - * @param[out] tdp pointer to a @p MACTransmitDescriptor structure - * @return The operation status. - * @retval RDY_OK the descriptor has been obtained. - * @retval RDY_TIMEOUT descriptor not available. - * - * @notapi - */ -msg_t mac_lld_get_transmit_descriptor(MACDriver *macp, - MACTransmitDescriptor *tdp) -{ - tiva_eth_tx_descriptor_t *tdes; - - if (!macp->link_up) - return MSG_TIMEOUT; - - osalSysLock(); - - /* Get Current TX descriptor.*/ - tdes = macp->txptr; - - /* Ensure that descriptor isn't owned by the Ethernet DMA or locked by - another thread.*/ - if (tdes->tdes0 & (TIVA_TDES0_OWN) || (tdes->locked)) { - osalSysUnlock(); - return MSG_TIMEOUT; - } - - /* Marks the current descriptor as locked.*/ - tdes->locked = 1; - - /* Next TX descriptor to use.*/ - macp->txptr = (tiva_eth_tx_descriptor_t *)tdes->tdes3; - - osalSysUnlock(); - - /* Set the buffer size and configuration.*/ - tdp->offset = 0; - tdp->size = TIVA_MAC_BUFFERS_SIZE; - tdp->physdesc = tdes; - - return MSG_OK; -} - -/** - * @brief Releases a transmit descriptor and starts the transmission of the - * enqueued data as a single frame. - * - * @param[in] tdp the pointer to the @p MACTransmitDescriptor structure - * - * @notapi - */ -void mac_lld_release_transmit_descriptor(MACTransmitDescriptor *tdp) -{ - osalDbgAssert(!(tdp->physdesc->tdes0 & TIVA_TDES0_OWN), - "attempt to release descriptor already owned by DMA"); - - osalSysLock(); - - /* Unlocks the descriptor and returns it to the DMA engine.*/ - tdp->physdesc->tdes1 = tdp->offset; - tdp->physdesc->tdes0 = TIVA_TDES0_CIC(TIVA_MAC_IP_CHECKSUM_OFFLOAD) | - TIVA_TDES0_IC | TIVA_TDES0_LS | TIVA_TDES0_FS | - TIVA_TDES0_TCH | TIVA_TDES0_OWN; - tdp->physdesc->locked = 0; - - /* If the DMA engine is stalled then a restart request is issued.*/ - if ((ETH->DMARIS & (0x7 << 20)) == (6 << 20)) { - ETH->DMARIS = (1 << 2); - ETH->TXPOLLD = 1; /* Any value is OK.*/ - } - - osalSysUnlock(); -} - -/** - * @brief Returns a receive descriptor. - * - * @param[in] macp pointer to the @p MACDriver object - * @param[out] rdp pointer to a @p MACReceiveDescriptor structure - * @return The operation status. - * @retval RDY_OK the descriptor has been obtained. - * @retval RDY_TIMEOUT descriptor not available. - * - * @notapi - */ -msg_t mac_lld_get_receive_descriptor(MACDriver *macp, - MACReceiveDescriptor *rdp) -{ - tiva_eth_rx_descriptor_t *rdes; - - osalSysLock(); - - /* Get Current RX descriptor.*/ - rdes = macp->rxptr; - - /* Iterates through received frames until a valid one is found, invalid - frames are discarded.*/ - while (!(rdes->rdes0 & TIVA_RDES0_OWN)) { - if (!(rdes->rdes0 & (TIVA_RDES0_AFM | TIVA_RDES0_ES)) -#if TIVA_MAC_IP_CHECKSUM_OFFLOAD - && (rdes->rdes0 & TIVA_RDES0_FT) - && !(rdes->rdes0 & (TIVA_RDES0_IPHCE | TIVA_RDES0_PCE)) -#endif - && (rdes->rdes0 & TIVA_RDES0_FS) && (rdes->rdes0 & TIVA_RDES0_LS)) { - /* Found a valid one.*/ - rdp->offset = 0; - rdp->size = ((rdes->rdes0 & TIVA_RDES0_FL_MASK) >> 16) - 4; - rdp->physdesc = rdes; - macp->rxptr = (tiva_eth_rx_descriptor_t *)rdes->rdes3; - - osalSysUnlock(); - return MSG_OK; - } - /* Invalid frame found, purging.*/ - rdes->rdes0 = TIVA_RDES0_OWN; - rdes = (tiva_eth_rx_descriptor_t *)rdes->rdes3; - } - - /* Next descriptor to check.*/ - macp->rxptr = rdes; - - osalSysUnlock(); - return MSG_TIMEOUT; -} - -/** - * @brief Releases a receive descriptor. - * @details The descriptor and its buffer are made available for more incoming - * frames. - * - * @param[in] rdp the pointer to the @p MACReceiveDescriptor structure - * - * @notapi - */ -void mac_lld_release_receive_descriptor(MACReceiveDescriptor *rdp) -{ - osalDbgAssert(!(rdp->physdesc->rdes0 & TIVA_RDES0_OWN), - "attempt to release descriptor already owned by DMA"); - - osalSysLock(); - - /* Give buffer back to the Ethernet DMA.*/ - rdp->physdesc->rdes0 = TIVA_RDES0_OWN; - - /* If the DMA engine is stalled then a restart request is issued.*/ - if ((ETH->STATUS & (0xf << 17)) == (4 << 17)) { - ETH->DMARIS = (1 << 7); - ETH->TXPOLLD = 1; /* Any value is OK.*/ - } - - osalSysUnlock(); -} - -/** - * @brief Updates and returns the link status. - * - * @param[in] macp pointer to the @p MACDriver object - * @return The link status. - * @retval TRUE if the link is active. - * @retval FALSE if the link is down. - * - * @notapi - */ -bool mac_lld_poll_link_status(MACDriver *macp) -{ - uint32_t maccfg, bmsr, bmcr; - - maccfg = ETH->CFG; - - /* PHY CR and SR registers read.*/ - (void)mii_read(macp, MII_BMSR); - bmsr = mii_read(macp, MII_BMSR); - bmcr = mii_read(macp, MII_BMCR); - - /* Check on auto-negotiation mode.*/ - if (bmcr & BMCR_ANENABLE) { - uint32_t lpa; - - /* Auto-negotiation must be finished without faults and link established.*/ - if ((bmsr & (BMSR_LSTATUS | BMSR_RFAULT | BMSR_ANEGCOMPLETE)) != - (BMSR_LSTATUS | BMSR_ANEGCOMPLETE)) - return macp->link_up = false; - - /* Auto-negotiation enabled, checks the LPA register.*/ - lpa = mii_read(macp, MII_LPA); - - /* Check on link speed.*/ - if (lpa & (LPA_100HALF | LPA_100FULL | LPA_100BASE4)) - maccfg |= (1 << 14); - else - maccfg &= ~(1 << 14); - - /* Check on link mode.*/ - if (lpa & (LPA_10FULL | LPA_100FULL)) - maccfg |= (1 << 11); - else - maccfg &= ~(1 << 11); - } - else { - /* Link must be established.*/ - if (!(bmsr & BMSR_LSTATUS)) - return macp->link_up = false; - - /* Check on link speed.*/ - if (bmcr & BMCR_SPEED100) - maccfg |= (1 << 14); - else - maccfg &= ~(1 << 14); - - /* Check on link mode.*/ - if (bmcr & BMCR_FULLDPLX) - maccfg |= (1 << 11); - else - maccfg &= ~(1 << 11); - } - - /* Changes the mode in the MAC.*/ - ETH->CFG = maccfg; - - /* Returns the link status.*/ - return macp->link_up = true; -} - -/** - * @brief Writes to a transmit descriptor's stream. - * - * @param[in] tdp pointer to a @p MACTransmitDescriptor structure - * @param[in] buf pointer to the buffer containing the data to be - * written - * @param[in] size number of bytes to be written - * @return The number of bytes written into the descriptor's - * stream, this value can be less than the amount - * specified in the parameter @p size if the maximum - * frame size is reached. - * - * @notapi - */ -size_t mac_lld_write_transmit_descriptor(MACTransmitDescriptor *tdp, - uint8_t *buf, - size_t size) -{ - osalDbgAssert(!(tdp->physdesc->tdes0 & TIVA_TDES0_OWN), - "attempt to write descriptor already owned by DMA"); - - if (size > tdp->size - tdp->offset) - size = tdp->size - tdp->offset; - - if (size > 0) { - memcpy((uint8_t *)(tdp->physdesc->tdes2) + tdp->offset, buf, size); - tdp->offset += size; - } - return size; -} - -/** - * @brief Reads from a receive descriptor's stream. - * - * @param[in] rdp pointer to a @p MACReceiveDescriptor structure - * @param[in] buf pointer to the buffer that will receive the read data - * @param[in] size number of bytes to be read - * @return The number of bytes read from the descriptor's - * stream, this value can be less than the amount - * specified in the parameter @p size if there are - * no more bytes to read. - * - * @notapi - */ -size_t mac_lld_read_receive_descriptor(MACReceiveDescriptor *rdp, - uint8_t *buf, - size_t size) -{ - osalDbgAssert(!(rdp->physdesc->rdes0 & TIVA_RDES0_OWN), - "attempt to read descriptor already owned by DMA"); - - if (size > rdp->size - rdp->offset) - size = rdp->size - rdp->offset; - - if (size > 0) { - memcpy(buf, (uint8_t *)(rdp->physdesc->rdes2) + rdp->offset, size); - rdp->offset += size; - } - return size; -} - -#if MAC_USE_ZERO_COPY || defined(__DOXYGEN__) -/** - * @brief Returns a pointer to the next transmit buffer in the descriptor - * chain. - * @note The API guarantees that enough buffers can be requested to fill - * a whole frame. - * - * @param[in] tdp pointer to a @p MACTransmitDescriptor structure - * @param[in] size size of the requested buffer. Specify the frame size - * on the first call then scale the value down subtracting - * the amount of data already copied into the previous - * buffers. - * @param[out] sizep pointer to variable receiving the buffer size, it is - * zero when the last buffer has already been returned. - * Note that a returned size lower than the amount - * requested means that more buffers must be requested - * in order to fill the frame data entirely. - * @return Pointer to the returned buffer. - * @retval NULL if the buffer chain has been entirely scanned. - * - * @notapi - */ -uint8_t *mac_lld_get_next_transmit_buffer(MACTransmitDescriptor *tdp, - size_t size, - size_t *sizep) -{ - if (tdp->offset == 0) { - *sizep = tdp->size; - tdp->offset = size; - return (uint8_t *)tdp->physdesc->tdes2; - } - *sizep = 0; - return NULL; -} - -/** - * @brief Returns a pointer to the next receive buffer in the descriptor - * chain. - * @note The API guarantees that the descriptor chain contains a whole - * frame. - * - * @param[in] rdp pointer to a @p MACReceiveDescriptor structure - * @param[out] sizep pointer to variable receiving the buffer size, it is - * zero when the last buffer has already been returned. - * @return Pointer to the returned buffer. - * @retval NULL if the buffer chain has been entirely scanned. - * - * @notapi - */ -const uint8_t *mac_lld_get_next_receive_buffer(MACReceiveDescriptor *rdp, - size_t *sizep) -{ - if (rdp->size > 0) { - *sizep = rdp->size; - rdp->offset = rdp->size; - rdp->size = 0; - return (uint8_t *)rdp->physdesc->rdes2; - } - *sizep = 0; - return NULL; -} -#endif /* MAC_USE_ZERO_COPY */ - -#endif /* HAL_USE_MAC */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.h deleted file mode 100644 index 98036bb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_mac_lld.h +++ /dev/null @@ -1,438 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/mac_lld.h - * @brief MAC Driver subsystem low level driver header. - * - * @addtogroup MAC - * @{ - */ - -#ifndef HAL_MAC_LLD_H -#define HAL_MAC_LLD_H - -#if HAL_USE_MAC || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief This implementation supports the zero-copy mode API. - */ -#define MAC_SUPPORTS_ZERO_COPY TRUE - -/** - * @name RDES0 constants - * @{ - */ -#define TIVA_RDES0_OWN 0x80000000 -#define TIVA_RDES0_AFM 0x40000000 - -#define TIVA_RDES0_FL_MASK 0x3FFF0000 -#define TIVA_RDES0_FL(n) ((n) << 16) - -#define TIVA_RDES0_ES 0x00008000 -#define TIVA_RDES0_DESERR 0x00004000 -#define TIVA_RDES0_SAF 0x00002000 -#define TIVA_RDES0_LE 0x00001000 -#define TIVA_RDES0_OE 0x00000800 -#define TIVA_RDES0_VLAN 0x00000400 -#define TIVA_RDES0_FS 0x00000200 -#define TIVA_RDES0_LS 0x00000100 -#define TIVA_RDES0_TAGF 0x00000080 -#define TIVA_RDES0_LC 0x00000040 -#define TIVA_RDES0_FT 0x00000020 -#define TIVA_RDES0_RWT 0x00000010 -#define TIVA_RDES0_RE 0x00000008 -#define TIVA_RDES0_DE 0x00000004 -#define TIVA_RDES0_CE 0x00000002 -#define TIVA_RDES0_ESA 0x00000001 -/** @} */ - -/** - * @name RDES1 constants - * @{ - */ -#define TIVA_RDES1_DIC 0x80000000 - -#define TIVA_RDES1_RBS2_MASK 0x1FFF0000 -#define TIVA_RDES1_RBS2(n) ((n) << 16) - -#define TIVA_RDES1_RER 0x00008000 -#define TIVA_RDES1_RCH 0x00004000 - -#define TIVA_RDES1_RBS1_MASK 0x00001FFF -#define TIVA_RDES1_RBS1(n) ((n) << 0) - -/** @} */ - -/** - * @name TDES0 constants - * @{ - */ -#define TIVA_TDES0_OWN 0x80000000 -#define TIVA_TDES0_IC 0x40000000 -#define TIVA_TDES0_LS 0x20000000 -#define TIVA_TDES0_FS 0x10000000 -#define TIVA_TDES0_DC 0x08000000 -#define TIVA_TDES0_DP 0x04000000 -#define TIVA_TDES0_TTSE 0x02000000 -#define TIVA_TDES0_CRCR 0x01000000 - -#define TIVA_TDES0_CIC_MASK 0x00C00000 -#define TIVA_TDES0_CIC(n) ((n) << 22) - -#define TIVA_TDES0_TER 0x00200000 -#define TIVA_TDES0_TCH 0x00100000 -#define TIVA_TDES0_VLIC 0x000C0000 -#define TIVA_TDES0_TTSS 0x00020000 -#define TIVA_TDES0_IHE 0x00010000 -#define TIVA_TDES0_ES 0x00008000 -#define TIVA_TDES0_JT 0x00004000 -#define TIVA_TDES0_FF 0x00002000 -#define TIVA_TDES0_IPE 0x00001000 -#define TIVA_TDES0_LC 0x00000800 -#define TIVA_TDES0_NC 0x00000400 -#define TIVA_TDES0_LCO 0x00000200 -#define TIVA_TDES0_EC 0x00000100 -#define TIVA_TDES0_VF 0x00000080 - -#define TIVA_TDES0_CC_MASK 0x00000078 -#define TIVA_TDES0_CC(n) ((n) << 3) - -#define TIVA_TDES0_ED 0x00000004 -#define TIVA_TDES0_UF 0x00000002 -#define TIVA_TDES0_DB 0x00000001 -/** @} */ - -/** - * @name TDES1 constants - * @{ - */ -#define TIVA_TDES1_SAIC_MASK 0xE0000000 -#define TIVA_TDES1_SAIC(n) ((n) << 29) - -#define TIVA_TDES1_TBS2_MASK 0x1FFF0000 -#define TIVA_TDES1_TBS2(n) ((n) << 16) - -#define TIVA_TDES1_TBS1_MASK 0x00001FFF -#define TIVA_TDES1_TBS1(n) ((n) << 0) -/** @} */ - - - - -/** - * @name Ethernet PHY registers - */ -#define TIVA_BMCR 0x00000000 /* MR0 - Basic Mode Control */ -#define TIVA_BMSR 0x00000001 /* MR1 - Basic Mode Status */ -#define TIVA_ID1 0x00000002 /* MR2 - Identifier Register 1 */ -#define TIVA_ID2 0x00000003 /* MR3 - Identifier Register 2 */ -#define TIVA_ANA 0x00000004 /* MR4 - Auto-Negotiation Advertisement */ -#define TIVA_ANLPA 0x00000005 /* MR5 - Auto-Negotiation Link Partner Ability */ -#define TIVA_ANER 0x00000006 /* MR6 - Auto-Negotiation Expansion */ -#define TIVA_ANNPTR 0x00000007 /* MR7 - Auto-Negotiation Next Page TX */ -#define TIVA_ANLNPTR 0x00000008 /* MR8 - Auto-Negotiation Link Partner Ability Next Page */ -#define TIVA_CFG1 0x00000009 /* MR9 - Configuration 1 */ -#define TIVA_CFG2 0x0000000A /* MR10 - Configuration 2 */ -#define TIVA_CFG3 0x0000000B /* MR11 - Configuration 3 */ -#define TIVA_REGCTL 0x0000000D /* MR13 - Register Control */ -#define TIVA_ADDAR 0x0000000E /* MR14 - Address or Data */ -#define TIVA_STS 0x00000010 /* MR16 - Status */ -#define TIVA_SCR 0x00000011 /* MR17 - Specific Control */ -#define TIVA_MISR1 0x00000012 /* MR18 - MII Interrupt Status 1 */ -#define TIVA_MISR2 0x00000013 /* MR19 - MII Interrupt Status 2 */ -#define TIVA_FCSCR 0x00000014 /* MR20 - False Carrier Sense Counter */ -#define TIVA_RXERCNT 0x00000015 /* MR21 - Receive Error Count */ -#define TIVA_BISTCR 0x00000016 /* MR22 - BIST Control */ -#define TIVA_LEDCR 0x00000018 /* MR24 - LED Control */ -#define TIVA_CTL 0x00000019 /* MR25 - Control */ -#define TIVA_10BTSC 0x0000001A /* MR26 - 10Base-T Status/Control - MR26 */ -#define TIVA_BICSR1 0x0000001B /* MR27 - BIST Control and Status 1 */ -#define TIVA_BICSR2 0x0000001C /* MR28 - BIST Control and Status 2 */ -#define TIVA_CDCR 0x0000001E /* MR30 - Cable Diagnostic Control */ -#define TIVA_RCR 0x0000001F /* MR31 - Reset Control */ -#define TIVA_LEDCFG 0x00000025 /* MR37 - LED Configuration */ -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief Number of available transmit buffers. - */ -#if !defined(TIVA_MAC_TRANSMIT_BUFFERS) || defined(__DOXYGEN__) -#define TIVA_MAC_TRANSMIT_BUFFERS 2 -#endif - -/** - * @brief Number of available receive buffers. - */ -#if !defined(TIVA_MAC_RECEIVE_BUFFERS) || defined(__DOXYGEN__) -#define TIVA_MAC_RECEIVE_BUFFERS 4 -#endif - -/** - * @brief Maximum supported frame size. - */ -#if !defined(TIVA_MAC_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define TIVA_MAC_BUFFERS_SIZE 1522 -#endif - -/** - * @brief PHY detection timeout. - * @details Timeout, in milliseconds, for PHY address detection, if a PHY - * is not detected within the timeout then the driver halts during - * initialization. This setting applies only if the PHY address is - * not explicitly set in the board header file using - * @p BOARD_PHY_ADDRESS. A zero value disables the timeout and a - * single search path is performed. - */ -#if !defined(TIVA_MAC_PHY_TIMEOUT) || defined(__DOXYGEN__) -#define TIVA_MAC_PHY_TIMEOUT 0 -#endif - -/** - * @brief Change the PHY power state inside the driver. - */ -#if !defined(TIVA_MAC_CHANGE_PHY_STATE) || defined(__DOXYGEN__) -#define TIVA_MAC_CHANGE_PHY_STATE TRUE -#endif - -/** - * @brief ETHD1 interrupt priority level setting. - */ -#if !defined(TIVA_MAC_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_MAC_IRQ_PRIORITY 5 -#endif - -/** - * @brief IP checksum offload. - * @details The following modes are available: - * - 0 Function disabled. - * - 1 Only IP header checksum calculation and insertion are enabled. - * - 2 IP header checksum and payload checksum calculation and - * insertion are enabled, but pseudo-header checksum is not - * calculated in hardware. - * - 3 IP Header checksum and payload checksum calculation and - * insertion are enabled, and pseudo-header checksum is - * calculated in hardware. - * . - */ -#if !defined(TIVA_MAC_IP_CHECKSUM_OFFLOAD) || defined(__DOXYGEN__) -#define TIVA_MAC_IP_CHECKSUM_OFFLOAD 0 -#endif -/** @} */ - -#ifndef EMAC_PHY_CONFIG -#define EMAC_PHY_CONFIG ((0 << 31) | \ - (1 << 23) | \ - (1 << 10) | \ - (1 << 3) | \ - (3 << 1) | \ - (1 << 0)) -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if (TIVA_MAC_PHY_TIMEOUT > 0) && !HAL_IMPLEMENTS_COUNTERS -#error "TIVA_MAC_PHY_TIMEOUT requires the realtime counter service" -#endif - -#if !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_MAC_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to MAC" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of an Tiva Ethernet receive descriptor. - */ -typedef struct -{ - volatile uint32_t rdes0; - volatile uint32_t rdes1; - volatile uint32_t rdes2; - volatile uint32_t rdes3; -} tiva_eth_rx_descriptor_t; - -/** - * @brief Type of an Tiva Ethernet transmit descriptor. - */ -typedef struct -{ - volatile uint32_t tdes0; - volatile uint32_t tdes1; - volatile uint32_t tdes2; - volatile uint32_t tdes3; - volatile uint32_t locked; -} tiva_eth_tx_descriptor_t; - -/** - * @brief Driver configuration structure. - */ -typedef struct -{ - /** - * @brief MAC address. - */ - uint8_t *mac_address; - /* End of the mandatory fields.*/ -} MACConfig; - -/** - * @brief Structure representing a MAC driver. - */ -struct MACDriver -{ - /** - * @brief Driver state. - */ - macstate_t state; - /** - * @brief Current configuration data. - */ - const MACConfig *config; - /** - * @brief Transmit semaphore. - */ - threads_queue_t tdqueue; - /** - * @brief Receive semaphore. - */ - threads_queue_t rdqueue; -#if MAC_USE_EVENTS || defined(__DOXYGEN__) - /** - * @brief Receive event. - */ - event_source_t rdevent; -#endif - /* End of the mandatory fields.*/ - /** - * @brief Link status flag. - */ - bool link_up; - /** - * @brief PHY address (pre shifted). - */ - uint32_t phyaddr; - /** - * @brief Receive next frame pointer. - */ - tiva_eth_rx_descriptor_t *rxptr; - /** - * @brief Transmit next frame pointer. - */ - tiva_eth_tx_descriptor_t *txptr; -}; - -/** - * @brief Structure representing a transmit descriptor. - */ -typedef struct -{ - /** - * @brief Current write offset. - */ - size_t offset; - /** - * @brief Available space size. - */ - size_t size; - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the physical descriptor. - */ - tiva_eth_tx_descriptor_t *physdesc; -} MACTransmitDescriptor; - -/** - * @brief Structure representing a receive descriptor. - */ -typedef struct -{ - /** - * @brief Current read offset. - */ - size_t offset; - /** - * @brief Available data size. - */ - size_t size; - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the physical descriptor. - */ - tiva_eth_rx_descriptor_t *physdesc; -} MACReceiveDescriptor; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern MACDriver ETHD1; - -#ifdef __cplusplus -extern "C" { -#endif - void mac_lld_init(void); - void mac_lld_start(MACDriver *macp); - void mac_lld_stop(MACDriver *macp); - msg_t mac_lld_get_transmit_descriptor(MACDriver *macp, - MACTransmitDescriptor *tdp); - void mac_lld_release_transmit_descriptor(MACTransmitDescriptor *tdp); - msg_t mac_lld_get_receive_descriptor(MACDriver *macp, - MACReceiveDescriptor *rdp); - void mac_lld_release_receive_descriptor(MACReceiveDescriptor *rdp); - bool mac_lld_poll_link_status(MACDriver *macp); - size_t mac_lld_write_transmit_descriptor(MACTransmitDescriptor *tdp, - uint8_t *buf, - size_t size); - size_t mac_lld_read_receive_descriptor(MACReceiveDescriptor *rdp, - uint8_t *buf, - size_t size); -#if MAC_USE_ZERO_COPY - uint8_t *mac_lld_get_next_transmit_buffer(MACTransmitDescriptor *tdp, - size_t size, - size_t *sizep); - const uint8_t *mac_lld_get_next_receive_buffer(MACReceiveDescriptor *rdp, - size_t *sizep); -#endif /* MAC_USE_ZERO_COPY */ -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_MAC */ - -#endif /* HAL_MAC_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.c deleted file mode 100644 index 5460fd4..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/pal_lld.c - * @brief TM4C123x/TM4C129x PAL subsystem low level driver. - * - * @addtogroup PAL - * @{ - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if TIVA_HAS_GPIOA || defined(__DOXYGEN__) -#define GPIOA_BIT (1 << 0) -#if TIVA_GPIO_GPIOA_USE_AHB && defined(TM4C123x) -#define GPIOA_AHB_BIT (1 << 0) -#else -#define GPIOA_AHB_BIT 0 -#endif -#else -#define GPIOA_BIT 0 -#define GPIOA_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOB || defined(__DOXYGEN__) -#define GPIOB_BIT (1 << 1) -#if TIVA_GPIO_GPIOB_USE_AHB && defined(TM4C123x) -#define GPIOB_AHB_BIT (1 << 1) -#else -#define GPIOB_AHB_BIT 0 -#endif -#else -#define GPIOB_BIT 0 -#define GPIOB_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOC || defined(__DOXYGEN__) -#define GPIOC_BIT (1 << 2) -#if TIVA_GPIO_GPIOC_USE_AHB && defined(TM4C123x) -#define GPIOC_AHB_BIT (1 << 2) -#else -#define GPIOC_AHB_BIT 0 -#endif -#else -#define GPIOC_BIT 0 -#define GPIOC_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOD || defined(__DOXYGEN__) -#define GPIOD_BIT (1 << 3) -#if TIVA_GPIO_GPIOD_USE_AHB && defined(TM4C123x) -#define GPIOD_AHB_BIT (1 << 3) -#else -#define GPIOD_AHB_BIT 0 -#endif -#else -#define GPIOD_BIT 0 -#define GPIOD_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOE || defined(__DOXYGEN__) -#define GPIOE_BIT (1 << 4) -#if TIVA_GPIO_GPIOE_USE_AHB && defined(TM4C123x) -#define GPIOE_AHB_BIT (1 << 4) -#else -#define GPIOE_AHB_BIT 0 -#endif -#else -#define GPIOE_BIT 0 -#define GPIOE_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOF || defined(__DOXYGEN__) -#define GPIOF_BIT (1 << 5) -#if TIVA_GPIO_GPIOF_USE_AHB && defined(TM4C123x) -#define GPIOF_AHB_BIT (1 << 5) -#else -#define GPIOF_AHB_BIT 0 -#endif -#else -#define GPIOF_BIT 0 -#define GPIOF_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) -#define GPIOG_BIT (1 << 6) -#if TIVA_GPIO_GPIOG_USE_AHB && defined(TM4C123x) -#define GPIOG_AHB_BIT (1 << 6) -#else -#define GPIOG_AHB_BIT 0 -#endif -#else -#define GPIOG_BIT 0 -#define GPIOG_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) -#define GPIOH_BIT (1 << 7) -#if TIVA_GPIO_GPIOH_USE_AHB && defined(TM4C123x) -#define GPIOH_AHB_BIT (1 << 7) -#else -#define GPIOH_AHB_BIT 0 -#endif -#else -#define GPIOH_BIT 0 -#define GPIOH_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) -#define GPIOJ_BIT (1 << 8) -#if TIVA_GPIO_GPIOJ_USE_AHB && defined(TM4C123x) -#define GPIOJ_AHB_BIT (1 << 8) -#else -#define GPIOJ_AHB_BIT 0 -#endif -#else -#define GPIOJ_BIT 0 -#define GPIOJ_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) -#define GPIOK_BIT (1 << 9) -#define GPIOK_AHB_BIT (1 << 9) -#else -#define GPIOK_BIT 0 -#define GPIOK_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) -#define GPIOL_BIT (1 << 10) -#define GPIOL_AHB_BIT (1 << 10) -#else -#define GPIOL_BIT 0 -#define GPIOL_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) -#define GPIOM_BIT (1 << 11) -#define GPIOM_AHB_BIT (1 << 11) -#else -#define GPIOM_BIT 0 -#define GPIOM_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) -#define GPION_BIT (1 << 12) -#define GPION_AHB_BIT (1 << 12) -#else -#define GPION_BIT 0 -#define GPION_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) -#define GPIOP_BIT (1 << 13) -#define GPIOP_AHB_BIT (1 << 13) -#else -#define GPIOP_BIT 0 -#define GPIOP_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) -#define GPIOQ_BIT (1 << 14) -#define GPIOQ_AHB_BIT (1 << 14) -#else -#define GPIOQ_BIT 0 -#define GPIOQ_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) -#define GPIOR_BIT (1 << 15) -#define GPIOR_AHB_BIT (1 << 15) -#else -#define GPIOR_BIT 0 -#define GPIOR_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) -#define GPIOS_BIT (1 << 16) -#define GPIOS_AHB_BIT (1 << 16) -#else -#define GPIOS_BIT 0 -#define GPIOS_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) -#define GPIOT_BIT (1 << 17) -#define GPIOT_AHB_BIT (1 << 17) -#else -#define GPIOT_BIT 0 -#define GPIOT_AHB_BIT 0 -#endif - -#define RCGCGPIO_MASK (GPIOA_BIT | GPIOB_BIT | GPIOC_BIT | GPIOD_BIT | \ - GPIOE_BIT | GPIOF_BIT | GPIOG_BIT | GPIOH_BIT | \ - GPIOJ_BIT | GPIOK_BIT | GPIOL_BIT | GPIOM_BIT | \ - GPION_BIT | GPIOP_BIT | GPIOQ_BIT | GPIOR_BIT | \ - GPIOS_BIT | GPIOR_BIT) - -#define GPIOHBCTL_MASK (GPIOA_AHB_BIT | GPIOB_AHB_BIT | GPIOC_AHB_BIT | \ - GPIOD_AHB_BIT | GPIOE_AHB_BIT | GPIOF_AHB_BIT | \ - GPIOG_AHB_BIT | GPIOH_AHB_BIT | GPIOJ_AHB_BIT | \ - GPIOK_AHB_BIT | GPIOL_AHB_BIT | GPIOM_AHB_BIT | \ - GPION_AHB_BIT | GPIOP_AHB_BIT | GPIOQ_AHB_BIT | \ - GPIOR_AHB_BIT | GPIOS_AHB_BIT | GPIOT_AHB_BIT) - -/* GPIO lock password.*/ -#define TIVA_GPIO_LOCK_PWD 0x4C4F434B - -#define GPIOC_JTAG_MASK (0x0F) -#define GPIOD_NMI_MASK (0x80) -#define GPIOF_NMI_MASK (0x01) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Initializes the port with the port configuration. - * - * @param[in] port the port identifier - * @param[in] config the port configuration - */ -static void gpio_init(ioportid_t port, const tiva_gpio_setup_t *config) -{ - port->DATA = config->data; - port->DIR = config->dir; - port->AFSEL = config->afsel; - port->DR2R = config->dr2r; - port->DR4R = config->dr4r; - port->DR8R = config->dr8r; - port->ODR = config->odr; - port->PUR = config->pur; - port->PDR = config->pdr; - port->SLR = config->slr; - port->DEN = config->den; - port->AMSEL = config->amsel; - port->PCTL = config->pctl; -} - -/** - * @brief Unlocks the masked pins of the GPIO peripheral. - * @note This function is only useful for PORTC0-3, PORTD7 and PORTF0. - * - * @param[in] port the port identifier - * @param[in] mask the pin mask - */ -static void gpio_unlock(ioportid_t port, ioportmask_t mask) -{ - port->LOCK = TIVA_GPIO_LOCK_PWD; - port->CR = mask; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Tiva I/O ports configuration. - * @details Ports A-F (G, H, J, K, L, M, N, P, Q, R, S, T) clocks enabled. - * - * @param[in] config the Tiva ports configuration - * - * @notapi - */ -void _pal_lld_init(const PALConfig *config) -{ - /* - * Enables all GPIO clocks. - */ - SYSCTL->RCGCGPIO = RCGCGPIO_MASK; -#if defined(TM4C123x) - SYSCTL->GPIOHBCTL = GPIOHBCTL_MASK; -#endif - - /* Wait until all GPIO modules are ready */ - while (!((SYSCTL->PRGPIO & RCGCGPIO_MASK) == RCGCGPIO_MASK)) - ; - -#if TIVA_HAS_GPIOA - gpio_init(GPIOA, &config->PAData); -#endif -#if TIVA_HAS_GPIOB - gpio_init(GPIOB, &config->PBData); -#endif -#if TIVA_HAS_GPIOC - /* Unlock JTAG pins.*/ - gpio_unlock(GPIOC, GPIOC_JTAG_MASK); - gpio_init(GPIOC, &config->PCData); -#endif -#if TIVA_HAS_GPIOD - /* Unlock NMI pin.*/ - gpio_unlock(GPIOD, GPIOD_NMI_MASK); - gpio_init(GPIOD, &config->PDData); -#endif -#if TIVA_HAS_GPIOE - gpio_init(GPIOE, &config->PEData); -#endif -#if TIVA_HAS_GPIOF - /* Unlock NMI pin.*/ - gpio_unlock(GPIOF, GPIOF_NMI_MASK); - gpio_init(GPIOF, &config->PFData); -#endif -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) - gpio_init(GPIOG, &config->PGData); -#endif -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) - gpio_init(GPIOH, &config->PHData); -#endif -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_init(GPIOJ, &config->PJData); -#endif -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) - gpio_init(GPIOK, &config->PKData); -#endif -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) - gpio_init(GPIOL, &config->PLData); -#endif -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) - gpio_init(GPIOM, &config->PMData); -#endif -#if TIVA_HAS_GPION || defined(__DOXYGEN__) - gpio_init(GPION, &config->PNData); -#endif -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) - gpio_init(GPIOP, &config->PPData); -#endif -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) - gpio_init(GPIOQ, &config->PQData); -#endif -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) - gpio_init(GPIOR, &config->PRData); -#endif -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) - gpio_init(GPIOS, &config->PSData); -#endif -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) - gpio_init(GPIOT, &config->PTData); -#endif -} - -/** - * @brief Pads mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @notapi - */ -void _pal_lld_setgroupmode(ioportid_t port, ioportmask_t mask, iomode_t mode) -{ - uint32_t dir = (mode & PAL_TIVA_DIR_MASK) >> 0; - uint32_t afsel = (mode & PAL_TIVA_AFSEL_MASK) >> 1; - uint32_t dr2r = (mode & PAL_TIVA_DR2R_MASK) >> 2; - uint32_t dr4r = (mode & PAL_TIVA_DR4R_MASK) >> 3; - uint32_t dr8r = (mode & PAL_TIVA_DR8R_MASK) >> 4; - uint32_t odr = (mode & PAL_TIVA_ODR_MASK) >> 5; - uint32_t pur = (mode & PAL_TIVA_PUR_MASK) >> 6; - uint32_t pdr = (mode & PAL_TIVA_PDR_MASK) >> 7; - uint32_t slr = (mode & PAL_TIVA_SLR_MASK) >> 8; - uint32_t den = (mode & PAL_TIVA_DEN_MASK) >> 9; - uint32_t amsel = (mode & PAL_TIVA_AMSEL_MASK) >> 10; - uint32_t pctl = (mode & PAL_TIVA_PCTL_MASK) >> 11; - uint32_t bit = 0; - - while(TRUE) { - uint32_t pctl_mask = (7 << (4 * bit)); - uint32_t bit_mask = (1 << bit); - - if ((mask & 1) != 0) { - port->DIR = (port->DIR & ~bit_mask) | dir; - port->AFSEL = (port->AFSEL & ~bit_mask) | afsel; - port->DR2R = (port->DR2R & ~bit_mask) | dr2r; - port->DR4R = (port->DR4R & ~bit_mask) | dr4r; - port->DR8R = (port->DR8R & ~bit_mask) | dr8r; - port->ODR = (port->ODR & ~bit_mask) | odr; - port->PUR = (port->PUR & ~bit_mask) | pur; - port->PDR = (port->PDR & ~bit_mask) | pdr; - port->SLR = (port->SLR & ~bit_mask) | slr; - port->DEN = (port->DEN & ~bit_mask) | den; - port->AMSEL = (port->AMSEL & ~bit_mask) | amsel; - port->PCTL = (port->PCTL & ~pctl_mask) | pctl; - } - - mask >>= 1; - if (!mask) { - return; - } - - dir <<= 1; - afsel <<= 1; - dr2r <<= 1; - dr4r <<= 1; - dr8r <<= 1; - odr <<= 1; - pur <<= 1; - pdr <<= 1; - slr <<= 1; - den <<= 1; - amsel <<= 1; - pctl <<= 4; - - bit++; - } -} - -#endif /* HAL_USE_PAL */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.h deleted file mode 100644 index c0cd82b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pal_lld.h +++ /dev/null @@ -1,762 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/pal_lld.h - * @brief TM4C123x/TM4C129x PAL subsystem low level driver header. - * - * @addtogroup PAL - * @{ - */ - -#ifndef HAL_PAL_LLD_H -#define HAL_PAL_LLD_H - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#undef PAL_MODE_RESET -#undef PAL_MODE_UNCONNECTED -#undef PAL_MODE_INPUT -#undef PAL_MODE_INPUT_PULLUP -#undef PAL_MODE_INPUT_PULLDOWN -#undef PAL_MODE_INPUT_ANALOG -#undef PAL_MODE_OUTPUT_PUSHPULL -#undef PAL_MODE_OUTPUT_OPENDRAIN - -/** - * @name TIVA-specific I/O mode flags - * @{ - */ -#define PAL_TIVA_DIR_MASK (1 << 0) -#define PAL_TIVA_DIR_INPUT (0 << 0) -#define PAL_TIVA_DIR_OUTPUT (1 << 0) - -#define PAL_TIVA_AFSEL_MASK (1 << 1) -#define PAL_TIVA_AFSEL_GPIO (0 << 1) -#define PAL_TIVA_AFSEL_ALTERNATE (1 << 1) - -#define PAL_TIVA_DR2R_MASK (1 << 2) -#define PAL_TIVA_DR2R_DISABLE (0 << 2) -#define PAL_TIVA_DR2R_ENABLE (1 << 2) - -#define PAL_TIVA_DR4R_MASK (1 << 3) -#define PAL_TIVA_DR4R_DISABLE (0 << 3) -#define PAL_TIVA_DR4R_ENABLE (1 << 3) - -#define PAL_TIVA_DR8R_MASK (1 << 4) -#define PAL_TIVA_DR8R_DISABLE (0 << 4) -#define PAL_TIVA_DR8R_ENABLE (1 << 4) - -#define PAL_TIVA_ODR_MASK (1 << 5) -#define PAL_TIVA_ODR_PUSHPULL (0 << 5) -#define PAL_TIVA_ODR_OPENDRAIN (1 << 5) - -#define PAL_TIVA_PUR_MASK (1 << 6) -#define PAL_TIVA_PUR_DISABLE (0 << 6) -#define PAL_TIVA_PUR_ENABLE (1 << 6) - -#define PAL_TIVA_PDR_MASK (1 << 7) -#define PAL_TIVA_PDR_DISABLE (0 << 7) -#define PAL_TIVA_PDR_ENABLE (1 << 7) - -#define PAL_TIVA_SLR_MASK (1 << 8) -#define PAL_TIVA_SLR_DISABLE (0 << 8) -#define PAL_TIVA_SLR_ENABLE (1 << 8) - -#define PAL_TIVA_DEN_MASK (1 << 9) -#define PAL_TIVA_DEN_DISABLE (0 << 9) -#define PAL_TIVA_DEN_ENABLE (1 << 9) - -#define PAL_TIVA_AMSEL_MASK (1 << 10) -#define PAL_TIVA_AMSEL_DISABLE (0 << 10) -#define PAL_TIVA_AMSEL_ENABLE (1 << 10) - -#define PAL_TIVA_PCTL_MASK (7 << 11) -#define PAL_TIVA_PCTL(n) ((n) << 11) - -/** - * @brief Alternate function. - * - * @param[in] n alternate function selector - */ -#define PAL_MODE_ALTERNATE(n) (PAL_TIVA_AFSEL_ALTERNATE | \ - PAL_TIVA_PCTL(n)) -/** - * @} - */ - -/** - * @name Standard I/O mode flags - * @{ - */ -/** - * @brief This mode is implemented as input. - */ -#define PAL_MODE_RESET PAL_MODE_INPUT - -/** - * @brief This mode is implemented as input with pull-up. - */ -#define PAL_MODE_UNCONNECTED PAL_MODE_INPUT_PULLUP - -/** - * @brief Regular input high-Z pad. - */ -#define PAL_MODE_INPUT (PAL_TIVA_DEN_ENABLE | \ - PAL_TIVA_DIR_INPUT) - -/** - * @brief Input pad with weak pull up resistor. - */ -#define PAL_MODE_INPUT_PULLUP (PAL_TIVA_DIR_INPUT | \ - PAL_TIVA_PUR_ENABLE | \ - PAL_TIVA_DEN_ENABLE) - -/** - * @brief Input pad with weak pull down resistor. - */ -#define PAL_MODE_INPUT_PULLDOWN (PAL_TIVA_DIR_INPUT | \ - PAL_TIVA_PDR_ENABLE | \ - PAL_TIVA_DEN_ENABLE) - -/** - * @brief Analog input mode. - */ -#define PAL_MODE_INPUT_ANALOG (PAL_TIVA_DEN_DISABLE | \ - PAL_TIVA_AMSEL_ENABLE) - -/** - * @brief Push-pull output pad. - */ -#define PAL_MODE_OUTPUT_PUSHPULL (PAL_TIVA_DIR_OUTPUT | \ - PAL_TIVA_DR2R_ENABLE | \ - PAL_TIVA_ODR_PUSHPULL | \ - PAL_TIVA_DEN_ENABLE) - -/** - * @brief Open-drain output pad. - */ -#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_TIVA_DIR_OUTPUT | \ - PAL_TIVA_DR2R_ENABLE | \ - PAL_TIVA_ODR_OPENDRAIN | \ - PAL_TIVA_DEN_ENABLE) -/** - * @} - */ - -/** @brief GPIOA port identifier.*/ -#define IOPORT1 GPIOA - -/** @brief GPIOB port identifier.*/ -#define IOPORT2 GPIOB - -/** @brief GPIOC port identifier.*/ -#define IOPORT3 GPIOC - -/** @brief GPIOD port identifier.*/ -#define IOPORT4 GPIOD - -/** @brief GPIOE port identifier.*/ -#define IOPORT5 GPIOE - -/** @brief GPIOF port identifier.*/ -#define IOPORT6 GPIOF - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) -/** @brief Port G setup data.*/ -#define IOPORT7 GPIOG -#endif /* TIVA_HAS_GPIOG.*/ - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) -/** @brief Port H setup data.*/ -#define IOPORT8 GPIOH -#endif /* TIVA_HAS_GPIOH.*/ - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) -/** @brief Port J setup data.*/ -#define IOPORT9 GPIOJ -#endif /* TIVA_HAS_GPIOJ.*/ - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) -/** @brief Port K setup data.*/ -#define IOPORT10 GPIOK -#endif /* TIVA_HAS_GPIOK.*/ - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) -/** @brief Port L setup data.*/ -#define IOPORT11 GPIOL -#endif /* TIVA_HAS_GPIOL.*/ - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) -/** @brief Port M setup data.*/ -#define IOPORT12 GPIOM -#endif /* TIVA_HAS_GPIOM.*/ - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) -/** @brief Port N setup data.*/ -#define IOPORT13 GPION -#endif /* TIVA_HAS_GPION.*/ - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) -/** @brief Port P setup data.*/ -#define IOPORT14 GPIOP -#endif /* TIVA_HAS_GPIOP.*/ - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) -/** @brief Port Q setup data.*/ -#define IOPORT15 GPIOQ -#endif /* TIVA_HAS_GPIOQ.*/ - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) -/** @brief Port R setup data.*/ -#define IOPORT16 GPIOR -#endif /* TIVA_HAS_GPIOR.*/ - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) -/** @brief Port S setup data.*/ -#define IOPORT17 GPIOS -#endif /* TIVA_HAS_GPIOS.*/ - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) -/** @brief Port T setup data.*/ -#define IOPORT18 GPIOT -#endif /* TIVA_HAS_GPIOT.*/ - -/** - * @brief Width, in bits, of an I/O port. - */ -#define PAL_IOPORTS_WIDTH 8 - -/** - * @brief Whole port mask. - * @brief This macro specifies all the valid bits into a port. - */ -#define PAL_WHOLE_PORT ((ioportmask_t)0xFF) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -#if defined(TM4C123x) - -/** - * @brief GPIOA AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOA. When set - * to @p FALSE the APB bus is used to access GPIOA. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOA_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#endif - -/** - * @brief GPIOB AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOB. When set - * to @p FALSE the APB bus is used to access GPIOB. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOB_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#endif - -/** - * @brief GPIOC AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOC. When set - * to @p FALSE the APB bus is used to access GPIOC. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOC_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#endif - -/** - * @brief GPIOD AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOD. When set - * to @p FALSE the APB bus is used to access GPIOD. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOD_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#endif - -/** - * @brief GPIOE AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOE. When set - * to @p FALSE the APB bus is used to access GPIOE. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOE_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#endif - -/** - * @brief GPIOF AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOF. When set - * to @p FALSE the APB bus is used to access GPIOF. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOF_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOF_USE_AHB TRUE -#endif - -/** - * @brief GPIOG AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOG. When set - * to @p FALSE the APB bus is used to access GPIOG. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOG_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOG_USE_AHB TRUE -#endif - -/** - * @brief GPIOH AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOH. When set - * to @p FALSE the APB bus is used to access GPIOH. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOH_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOH_USE_AHB TRUE -#endif - -/** - * @brief GPIOJ AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOJ. When set - * to @p FALSE the APB bus is used to access GPIOJ. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOJ_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOJ_USE_AHB TRUE -#endif - -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if defined(TM4C123x) - -#if TIVA_GPIO_GPIOA_USE_AHB -#define GPIOA GPIOA_AHB -#else -#define GPIOA GPIOA_APB -#endif - -#if TIVA_GPIO_GPIOB_USE_AHB -#define GPIOB GPIOB_AHB -#else -#define GPIOB GPIOB_APB -#endif - -#if TIVA_GPIO_GPIOC_USE_AHB -#define GPIOC GPIOC_AHB -#else -#define GPIOC GPIOC_APB -#endif - -#if TIVA_GPIO_GPIOD_USE_AHB -#define GPIOD GPIOD_AHB -#else -#define GPIOD GPIOD_APB -#endif - -#if TIVA_GPIO_GPIOE_USE_AHB -#define GPIOE GPIOE_AHB -#else -#define GPIOE GPIOE_APB -#endif - -#if TIVA_GPIO_GPIOF_USE_AHB -#define GPIOF GPIOF_AHB -#else -#define GPIOF GPIOF_APB -#endif - -#if TIVA_GPIO_GPIOG_USE_AHB -#define GPIOG GPIOG_AHB -#else -#define GPIOG GPIOG_APB -#endif - -#if TIVA_GPIO_GPIOH_USE_AHB -#define GPIOH GPIOH_AHB -#else -#define GPIOH GPIOH_APB -#endif - -#if TIVA_GPIO_GPIOJ_USE_AHB -#define GPIOJ GPIOJ_AHB -#else -#define GPIOJ GPIOJ_APB -#endif - -#define GPIOK GPIOK_AHB -#define GPIOL GPIOL_AHB -#define GPIOM GPIOM_AHB -#define GPION GPION_AHB -#define GPIOP GPIOP_AHB -#define GPIOQ GPIOQ_AHB - -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief GPIO port setup info. - */ -typedef struct -{ - /** @brief Initial value for DATA register.*/ - uint32_t data; - /** @brief Initial value for DIR register.*/ - uint32_t dir; - /** @brief Initial value for AFSEL register.*/ - uint32_t afsel; - /** @brief Initial value for DR2R register.*/ - uint32_t dr2r; - /** @brief Initial value for DR4R register.*/ - uint32_t dr4r; - /** @brief Initial value for DR8R register.*/ - uint32_t dr8r; - /** @brief Initial value for ODR register.*/ - uint32_t odr; - /** @brief Initial value for PUR register.*/ - uint32_t pur; - /** @brief Initial value for PDR register.*/ - uint32_t pdr; - /** @brief Initial value for SLR register.*/ - uint32_t slr; - /** @brief Initial value for DEN register.*/ - uint32_t den; - /** @brief Initial value for AMSEL register.*/ - uint32_t amsel; - /** @brief Initial value for PCTL register.*/ - uint32_t pctl; -} tiva_gpio_setup_t; - -/** - * @brief Tiva GPIO static initializer. - * @details An instance of this structure must be passed to @p palInit() at - * system startup time in order to initialized the digital I/O - * subsystem. This represents only the initial setup, specific pads - * or whole ports can be reprogrammed at later time. - */ -typedef struct -{ - /** @brief Port A setup data.*/ - tiva_gpio_setup_t PAData; - /** @brief Port B setup data.*/ - tiva_gpio_setup_t PBData; - /** @brief Port C setup data.*/ - tiva_gpio_setup_t PCData; - /** @brief Port D setup data.*/ - tiva_gpio_setup_t PDData; - /** @brief Port E setup data.*/ - tiva_gpio_setup_t PEData; - /** @brief Port F setup data.*/ - tiva_gpio_setup_t PFData; - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) - /** @brief Port G setup data.*/ - tiva_gpio_setup_t PGData; -#endif /* TIVA_HAS_GPIOG.*/ - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) - /** @brief Port H setup data.*/ - tiva_gpio_setup_t PHData; -#endif /* TIVA_HAS_GPIOH.*/ - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) - /** @brief Port J setup data.*/ - tiva_gpio_setup_t PJData; -#endif /* TIVA_HAS_GPIOJ.*/ - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) - /** @brief Port K setup data.*/ - tiva_gpio_setup_t PKData; -#endif /* TIVA_HAS_GPIOK.*/ - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) - /** @brief Port L setup data.*/ - tiva_gpio_setup_t PLData; -#endif /* TIVA_HAS_GPIOL.*/ - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) - /** @brief Port M setup data.*/ - tiva_gpio_setup_t PMData; -#endif /* TIVA_HAS_GPIOM.*/ - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) - /** @brief Port N setup data.*/ - tiva_gpio_setup_t PNData; -#endif /* TIVA_HAS_GPION.*/ - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) - /** @brief Port P setup data.*/ - tiva_gpio_setup_t PPData; -#endif /* TIVA_HAS_GPIOP.*/ - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) - /** @brief Port Q setup data.*/ - tiva_gpio_setup_t PQData; -#endif /* TIVA_HAS_GPIOQ.*/ - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) - /** @brief Port R setup data.*/ - tiva_gpio_setup_t PRData; -#endif /* TIVA_HAS_GPIOR.*/ - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) - /** @brief Port S setup data.*/ - tiva_gpio_setup_t PSData; -#endif /* TIVA_HAS_GPIOS.*/ - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) - /** @brief Port T setup data.*/ - tiva_gpio_setup_t PTData; -#endif /* TIVA_HAS_GPIOT.*/ -} PALConfig; - -/** - * @brief Digital I/O port sized unsigned type. - */ -typedef uint32_t ioportmask_t; - -/** - * @brief Digital I/O modes. - */ -typedef uint32_t iomode_t; - -/** - * @brief Port Identifier. - */ -typedef GPIO_TypeDef *ioportid_t; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Low level PAL subsystem initialization. - * - * @param[in] config architecture-dependent ports configuration - * - * @notapi - */ -#define pal_lld_init(config) _pal_lld_init(config) - -/** - * @brief Reads the physical I/O port states. - * - * @param[in] port port identifier - * @return The port bits. - * - * @notapi - */ -#define pal_lld_readport(port) ((port)->DATA) - -/** - * @brief Reads the output latch. - * @details The purpose of this function is to read back the latched output - * value. - * - * @param[in] port port identifier - * @return The latched logical states. - * - * @notapi - */ -#define pal_lld_readlatch(port) ((port)->DATA) - -/** - * @brief Writes a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be written on the specified port - * - * @notapi - */ -#define pal_lld_writeport(port, bits) ((port)->DATA = (bits)) - -/** - * @brief Sets a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be ORed on the specified port - * - * @notapi - */ -#define pal_lld_setport(port, bits) ((port)->MASKED_ACCESS[bits] = 0xFF) - -/** - * @brief Clears a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be cleared on the specified port - * - * @notapi - */ -#define pal_lld_clearport(port, bits) ((port)->MASKED_ACCESS[bits] = 0) - -/** - * @brief Reads a group of bits. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @return The group logical states. - * - * @notapi - */ -#define pal_lld_readgroup(port, mask, offset) \ - ((port)->MASKED_ACCESS[(mask) << (offset)]) - -/** - * @brief Writes a group of bits. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] bits bits to be written. Values exceeding the group width - * are masked. - * - * @notapi - */ -#define pal_lld_writegroup(port, mask, offset, bits) \ - ((port)->MASKED_ACCESS[(mask) << (offset)] = (bits)) - -/** - * @brief Pads group mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] mode group mode - * - * @notapi - */ -#define pal_lld_setgroupmode(port, mask, offset, mode) \ - _pal_lld_setgroupmode(port, mask << offset, mode) - -/** - * @brief Reads a logical state from an I/O pad. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @return The logical state. - * @retval PAL_LOW low logical state. - * @retval PAL_HIGH high logical state. - * - * @notapi - */ -#define pal_lld_readpad(port, pad) ((port)->MASKED_ACCESS[1 << (pad)]) - -/** - * @brief Writes a logical state on an output pad. - * @note This function is not meant to be invoked directly by the - * application code. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] bit logical value, the value must be @p PAL_LOW or - * @p PAL_HIGH - * - * @notapi - */ -#define pal_lld_writepad(port, pad, bit) \ - ((port)->MASKED_ACCESS[1 << (pad)] = (bit)) - -/** - * @brief Sets a pad logical state to @p PAL_HIGH. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_setpad(port, pad) \ - ((port)->MASKED_ACCESS[1 << (pad)] = 1 << (pad)) - -/** - * @brief Clears a pad logical state to @p PAL_LOW. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_clearpad(port, pad) \ - ((port)->MASKED_ACCESS[1 << (pad)] = 0) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -extern const PALConfig pal_default_config; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void _pal_lld_init(const PALConfig *config); - void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PAL */ - -#endif /* HAL_PAL_LLD_H */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.c deleted file mode 100644 index b223a9c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/pwm_lld.c - * @brief TM4C123x/TM4C129x PWM subsystem low level driver. - * - * @addtogroup PWM - * @{ - */ - -#include "hal.h" - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define PWM_INT_CMPBD (1 << 5) -#define PWM_INT_CMPBU (1 << 4) -#define PWM_INT_CMPAD (1 << 3) -#define PWM_INT_CMPAU (1 << 2) -#define PWM_INT_CNTLOAD (1 << 1) -#define PWM_INT_CNTZERO (1 << 0) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief PWMD1 driver identifier. - */ -#if TIVA_PWM_USE_PWM0 || defined(__DOXYGEN__) -PWMDriver PWMD1; -#endif - -/** - * @brief PWMD2 driver identifier. - */ -#if TIVA_PWM_USE_PWM1 || defined(__DOXYGEN__) -PWMDriver PWMD2; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Common PWM Generator IRQ handler. - * @note It is assumed that the various sources are only activated if the - * associated callback pointer is not equal to @p NULL in order to not - * perform an extra check in a potentially critical interrupt handler. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] i pwm generator number - */ -static void pwm_lld_serve_generator_interrupt (PWMDriver *pwmp, uint8_t i) -{ - uint32_t isc; - - isc = pwmp->pwm->PWM[i].ISC; - pwmp->pwm->PWM[i].ISC = isc; - - if (((isc & PWM_INT_CMPAD) != 0) && - (pwmp->config->channels[i * 2 + 0].callback != NULL)) { - pwmp->config->channels[i * 2 + 0].callback(pwmp); - } - - if (((isc & PWM_INT_CMPAU) != 0) && - (pwmp->config->channels[i * 2 + 0].callback != NULL)) { - pwmp->config->channels[i * 2 + 0].callback(pwmp); - } - - if (((isc & PWM_INT_CMPBD) != 0) && - (pwmp->config->channels[i * 2 + 1].callback != NULL)) { - pwmp->config->channels[i * 2 + 1].callback(pwmp); - } - - if (((isc & PWM_INT_CMPBU) != 0) && - (pwmp->config->channels[i * 2 + 1].callback != NULL)) { - pwmp->config->channels[i * 2 + 1].callback(pwmp); - } - - if (((isc & PWM_INT_CNTLOAD) != 0) && (pwmp->config->callback != NULL)) { - pwmp->config->callback(pwmp); - } - - if (((isc & PWM_INT_CNTZERO) != 0) && (pwmp->config->callback != NULL)) { - pwmp->config->callback(pwmp); - } -} - -/** - * @brief Common PWM fault IRQ handler. - * - * @param[in] pwmp pointer to a @p PWMDriver object - */ -static void pwm_lld_serve_fault_interrupt (PWMDriver *pwmp) -{ - (void) pwmp; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_PWM_USE_PWM0 -#if !defined(TIVA_PWM0FAULT_HANDLER) -#error "TIVA_PWM0FAULT_HANDLER not defined" -#endif -/* - * @brief PWM0 Fault handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM0FAULT_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_fault_interrupt(&PWMD1); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM0GEN0_HANDLER) -#error "TIVA_PWM0GEN0_HANDLER not defined" -#endif -/* - * @brief PWM0 Generator 0 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM0GEN0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD1, 0); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM0GEN1_HANDLER) -#error "TIVA_PWM0GEN1_HANDLER not defined" -#endif -/* - * @brief PWM0 Generator 1 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM0GEN1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD1, 1); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM0GEN2_HANDLER) -#error "TIVA_PWM0GEN2_HANDLER not defined" -#endif -/* - * @brief PWM0 Generator 2 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM0GEN2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD1, 2); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM0GEN3_HANDLER) -#error "TIVA_PWM0GEN3_HANDLER not defined" -#endif -/* - * @brief PWM0 Generator 3 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM0GEN3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD1, 3); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_PWM_USE_PWM1 -#if !defined(TIVA_PWM1FAULT_HANDLER) -#error "TIVA_PWM1FAULT_HANDLER not defined" -#endif -/* - * @brief PWM1 Fault handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM1FAULT_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_fault_interrupt(&PWMD2); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM1GEN0_HANDLER) -#error "TIVA_PWM1GEN0_HANDLER not defined" -#endif -/* - * @brief PWM1 Generator 0 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM1GEN0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD2, 0); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM1GEN1_HANDLER) -#error "TIVA_PWM1GEN1_HANDLER not defined" -#endif -/* - * @brief PWM1 Generator 1 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM1GEN1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD2, 1); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM1GEN2_HANDLER) -#error "TIVA_PWM1GEN2_HANDLER not defined" -#endif -/* - * @brief PWM1 Generator 2 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM1GEN2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD2, 2); - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_PWM1GEN3_HANDLER) -#error "TIVA_PWM1GEN3_HANDLER not defined" -#endif -/* - * @brief PWM1 Generator 3 handler - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_PWM1GEN3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - pwm_lld_serve_generator_interrupt(&PWMD2, 3); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level PWM driver initialization. - * - * @notapi - */ -void pwm_lld_init(void) -{ - /* Driver initialization.*/ -#if TIVA_PWM_USE_PWM0 - pwmObjectInit(&PWMD1); - PWMD1.channels = PWM_CHANNELS; - PWMD1.pwm = PWM0; -#endif - -#if TIVA_PWM_USE_PWM1 - pwmObjectInit(&PWMD2); - PWMD2.channels = PWM_CHANNELS; - PWMD2.pwm = PWM1; -#endif -} - -/** - * @brief Configures and activates the PWM peripheral. - * @note Starting a driver that is already in the @p PWM_READY state - * disables all the active channels. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_start(PWMDriver *pwmp) -{ - uint8_t i; - uint32_t invert = 0; - uint32_t enable = 0; - - if (pwmp->state == PWM_STOP) { - /* Clock activation.*/ -#if TIVA_PWM_USE_PWM0 - if (&PWMD1 == pwmp) { - SYSCTL->RCGCPWM |= (1 << 0); - nvicEnableVector(TIVA_PWM0FAULT_NUMBER, - TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM0GEN0_NUMBER, TIVA_PWM_PWM0_0_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM0GEN1_NUMBER, TIVA_PWM_PWM0_1_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM0GEN2_NUMBER, TIVA_PWM_PWM0_2_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM0GEN3_NUMBER, TIVA_PWM_PWM0_3_IRQ_PRIORITY); - } -#endif - -#if TIVA_PWM_USE_PWM1 - if (&PWMD2 == pwmp) { - SYSCTL->RCGCPWM |= (1 << 1); - nvicEnableVector(TIVA_PWM1FAULT_NUMBER, - TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM1GEN0_NUMBER, TIVA_PWM_PWM1_0_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM1GEN1_NUMBER, TIVA_PWM_PWM1_1_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM1GEN2_NUMBER, TIVA_PWM_PWM1_2_IRQ_PRIORITY); - nvicEnableVector(TIVA_PWM1GEN3_NUMBER, TIVA_PWM_PWM1_3_IRQ_PRIORITY); - } -#endif - } - else { - /* Driver re-configuration scenario, it must be stopped first.*/ - pwmp->pwm->PWM[0].CTL = 0; - pwmp->pwm->PWM[1].CTL = 0; - pwmp->pwm->PWM[2].CTL = 0; - pwmp->pwm->PWM[3].CTL = 0; - } - - /* Timer configuration.*/ - for (i = 0; i < (PWM_CHANNELS >> 1); i++) { - pwmp->pwm->PWM[i].CTL = 0; - pwmp->pwm->PWM[i].GEN[0] = 0x08C; - pwmp->pwm->PWM[i].GEN[1] = 0x80C; - pwmp->pwm->PWM[i].LOAD = (uint16_t)(pwmp->config->frequency - 1); - pwmp->pwm->PWM[i].CMP[0] = (uint16_t)(pwmp->period - 1); - pwmp->pwm->PWM[i].CMP[1] = (uint16_t)(pwmp->period - 1); - } - - /* Output enables and polarities setup.*/ - for (i = 0; i < PWM_CHANNELS; i++) { - switch (pwmp->config->channels[i].mode & PWM_OUTPUT_MASK) { - case PWM_OUTPUT_DISABLED: - enable &= ~(1 << i); - break; - case PWM_OUTPUT_ACTIVE_LOW: - invert |= (1 << i); - enable |= (1 << i); - break; - case PWM_OUTPUT_ACTIVE_HIGH: - invert &= ~(1 << i); - enable |= (1 << i); - break; - default: - ; - } - } - - pwmp->pwm->INVERT = invert; - pwmp->pwm->ENABLE = enable; - pwmp->pwm->ISC = 0xFFFFFFFF; -} - -/** - * @brief Deactivates the PWM peripheral. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_stop(PWMDriver *pwmp) -{ - /* If in ready state then disables the PWM clock.*/ - if (pwmp->state == PWM_READY) { - pwmp->pwm->PWM[0].CTL = 0; - pwmp->pwm->PWM[1].CTL = 0; - pwmp->pwm->PWM[2].CTL = 0; - pwmp->pwm->PWM[3].CTL = 0; - -#if TIVA_PWM_USE_PWM0 - if (&PWMD1 == pwmp) { - nvicDisableVector(TIVA_PWM0FAULT_NUMBER); - nvicDisableVector(TIVA_PWM0GEN0_NUMBER); - nvicDisableVector(TIVA_PWM0GEN1_NUMBER); - nvicDisableVector(TIVA_PWM0GEN2_NUMBER); - nvicDisableVector(TIVA_PWM0GEN3_NUMBER); - SYSCTL->RCGCPWM &= ~(1 << 0); - } -#endif - -#if TIVA_PWM_USE_PWM1 - if (&PWMD2 == pwmp) { - nvicDisableVector(TIVA_PWM1FAULT_NUMBER); - nvicDisableVector(TIVA_PWM1GEN0_NUMBER); - nvicDisableVector(TIVA_PWM1GEN1_NUMBER); - nvicDisableVector(TIVA_PWM1GEN2_NUMBER); - nvicDisableVector(TIVA_PWM1GEN3_NUMBER); - SYSCTL->RCGCPWM &= ~(1 << 1); - } -#endif - } -} - -/** - * @brief Enables a PWM channel. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is active using the specified configuration. - * @note The function has effect at the next cycle start. - * @note Channel notification is not enabled. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * @param[in] width PWM pulse width as clock pulses number - * - * @notapi - */ -void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width) -{ - /* Changing channel duty cycle on the fly.*/ - pwmp->pwm->PWM[channel >> 1].CMP[channel & 1] = width; - pwmp->pwm->PWM[channel >> 1].CTL |= (1 << 0); -} - -/** - * @brief Disables a PWM channel and its notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The channel is disabled and its output line returned to the - * idle state. - * @note The function has effect at the next cycle start. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) -{ - pwmp->pwm->PWM[channel >> 1].CMP[channel & 1] = 0; - pwmp->pwm->PWM[channel >> 1].CTL &= ~(1 << 0); -} - -/** - * @brief Enables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) -{ - uint32_t inten; - uint8_t i; - - /* If the IRQ is not already enabled care must be taken to clear it, - it is probably already pending because the timer is running.*/ - for(i = 0; i < (PWM_CHANNELS >> 1); i++) { - inten = pwmp->pwm->PWM[i].INTEN; - if ((inten & 0x03) == 0) { - pwmp->pwm->PWM[i].INTEN |= 0x03; - pwmp->pwm->PWM[i].ISC = 0x03; - } - } - - pwmp->pwm->INTEN = 0x3f; -} - -/** - * @brief Disables the periodic activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * - * @notapi - */ -void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) -{ - pwmp->pwm->PWM[0].INTEN &= ~(0x03); - pwmp->pwm->PWM[1].INTEN &= ~(0x03); - pwmp->pwm->PWM[2].INTEN &= ~(0x03); - pwmp->pwm->PWM[3].INTEN &= ~(0x03); - pwmp->pwm->INTEN &= ~(0x3F); -} - -/** - * @brief Enables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already enabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) -{ - uint32_t inten = pwmp->pwm->PWM[channel >> 1].INTEN; - - /* If the IRQ is not already enabled care must be taken to clear it, - it is probably already pending because the timer is running.*/ - if ((inten & (0x03 << (((channel & 1) * 2) + 2))) == 0) { - pwmp->pwm->PWM[channel >> 1].INTEN |= (0x03 << (((channel & 1) * 2) + 2)); - pwmp->pwm->PWM[channel >> 1].ISC = (0x03 << (((channel & 1) * 2) + 2)); - } -} - -/** - * @brief Disables a channel de-activation edge notification. - * @pre The PWM unit must have been activated using @p pwmStart(). - * @pre The channel must have been activated using @p pwmEnableChannel(). - * @note If the notification is already disabled then the call has no effect. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] channel PWM channel identifier (0...channels-1) - * - * @notapi - */ -void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel) -{ - pwmp->pwm->PWM[channel >> 1].INTEN &= ~(0x03 << (((channel & 1) * 2) + 2)); -} - -#endif /* HAL_USE_PWM */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.h deleted file mode 100644 index ac64fe1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_pwm_lld.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/pwm_lld.c - * @brief TM4C123x/TM4C129x PWM subsystem low level driver header. - * - * @addtogroup PWM - * @{ - */ - -#ifndef HAL_PWM_LLD_H -#define HAL_PWM_LLD_H - -#if HAL_USE_PWM || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Number of PWM channels per PWM driver. - */ -#define PWM_CHANNELS 8 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief PWMD1 driver enable switch. - * @details If set to @p TRUE the support for PWMD1 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_PWM_USE_PWM0) || defined(__DOXYGEN__) -#define TIVA_PWM_USE_PWM0 FALSE -#endif - -/** - * @brief PWMD2 driver enable switch. - * @details If set to @p TRUE the support for PWMD2 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_PWM_USE_PWM1) || defined(__DOXYGEN__) -#define TIVA_PWM_USE_PWM1 FALSE -#endif - -/** - * @brief PWMD1 fault interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY) || defined (__DOXYGEN__) -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY -#endif - -/** - * @brief PWMD1 channel 0 & 1 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM0_0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD1 channel 2 & 3 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM0_1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD1 channel 4 & 5 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM0_2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD1 channel 6 & 7 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM0_3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD2 fault interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY) || defined (__DOXYGEN__) -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY -#endif - -/** - * @brief PWMD2 channel 0 & 1 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM1_0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD2 channel 2 & 3 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM1_1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD2 channel 4 & 5 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM1_2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#endif - -/** - * @brief PWMD2 channel 6 & 7 interrupt priority level setting. - */ -#if !defined(TIVA_PWM_PWM1_3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Configuration checks. */ -/*===========================================================================*/ - -#if TIVA_PWM_USE_PWM0 && !TIVA_HAS_PWM0 -#error "PWM0 not present in the selected device" -#endif - -#if TIVA_PWM_USE_PWM1 && !TIVA_HAS_PWM1 -#error "PWM1 not present in the selected device" -#endif - -#if !TIVA_PWM_USE_PWM0 && !TIVA_PWM_USE_PWM1 -#error "PWM driver activated but no PWM peripheral assigned" -#endif - -#if TIVA_PWM_USE_PWM0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM0 FAULT" -#endif - -#if TIVA_PWM_USE_PWM0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM0_0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM0 GEN0" -#endif - -#if TIVA_PWM_USE_PWM0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM0_1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM0 GEN1" -#endif - -#if TIVA_PWM_USE_PWM0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM0_2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM0 GEN2" -#endif - -#if TIVA_PWM_USE_PWM0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM0_3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM0 GEN3" -#endif - -#if TIVA_PWM_USE_PWM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM1 FAULT" -#endif - -#if TIVA_PWM_USE_PWM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM1_0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM1 GEN0" -#endif - -#if TIVA_PWM_USE_PWM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM1_1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM1 GEN1" -#endif - -#if TIVA_PWM_USE_PWM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM1_2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM1 GEN2" -#endif - -#if TIVA_PWM_USE_PWM1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PWM_PWM1_3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to PWM1 GEN3" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a PWM mode. - */ -typedef uint32_t pwmmode_t; - -/** - * @brief Type of a PWM channel. - */ -typedef uint8_t pwmchannel_t; - -/** - * @brief Type of a channels mask. - */ -typedef uint32_t pwmchnmsk_t; - -/** - * @brief Type of a PWM counter. - */ -typedef uint16_t pwmcnt_t; - -/** - * @brief Type of a PWM driver channel configuration structure. - */ -typedef struct { - /** - * @brief Channel active logic level. - */ - pwmmode_t mode; - /** - * @brief Channel callback pointer. - * @note This callback is invoked on the channel compare event. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /* End of the mandatory fields.*/ -} PWMChannelConfig; - -/** - * @brief Type of a PWM driver configuration structure. - */ -typedef struct { - /** - * @brief Timer clock in Hz. - * @note The low level can use assertions in order to catch invalid - * frequency specifications. - */ - uint32_t frequency; - /** - * @brief PWM period in ticks. - * @note The low level can use assertions in order to catch invalid - * period specifications. - */ - pwmcnt_t period; - /** - * @brief Periodic callback pointer. - * @note This callback is invoked on PWM counter reset. If set to - * @p NULL then the callback is disabled. - */ - pwmcallback_t callback; - /** - * @brief Channels configurations. - */ - PWMChannelConfig channels[PWM_CHANNELS]; - /* End of the mandatory fields.*/ -} PWMConfig; - -/** - * @brief Structure representing a PWM driver. - */ -struct PWMDriver { - /** - * @brief Driver state. - */ - pwmstate_t state; - /** - * @brief Current driver configuration data. - */ - const PWMConfig *config; - /** - * @brief Current PWM period in ticks. - */ - pwmcnt_t period; - /** - * @brief Mask of the enabled channels. - */ - pwmchnmsk_t enabled; - /** - * @brief Number of channels in this instance. - */ - pwmchannel_t channels; -#if defined(PWM_DRIVER_EXT_FIELDS) - PWM_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the PWMx registers block. - */ - PWM_TypeDef *pwm; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Changes the period the PWM peripheral. - * @details This function changes the period of a PWM unit that has already - * been activated using @p pwmStart(). - * @pre The PWM unit must have been activated using @p pwmStart(). - * @post The PWM unit period is changed to the new value. - * @note The function has effect at the next cycle start. - * @note If a period is specified that is shorter than the pulse width - * programmed in one of the channels then the behavior is not - * guaranteed. - * - * @param[in] pwmp pointer to a @p PWMDriver object - * @param[in] period new cycle time in ticks - * - * @notapi - */ -#define pwm_lld_change_period(pwmp, period) \ - ((pwmp)->pwm->PWM[0].LOAD = (uint16_t)((period) - 1)); \ - ((pwmp)->pwm->PWM[1].LOAD = (uint16_t)((period) - 1)); \ - ((pwmp)->pwm->PWM[2].LOAD = (uint16_t)((period) - 1)); \ - ((pwmp)->pwm->PWM[3].LOAD = (uint16_t)((period) - 1)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if TIVA_PWM_USE_PWM0 && !defined(__DOXYGEN__) -extern PWMDriver PWMD1; -#endif - -#if TIVA_PWM_USE_PWM1 && !defined(__DOXYGEN__) -extern PWMDriver PWMD2; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void pwm_lld_init(void); - void pwm_lld_start(PWMDriver *pwmp); - void pwm_lld_stop(PWMDriver *pwmp); - void pwm_lld_enable_channel(PWMDriver *pwmp, - pwmchannel_t channel, - pwmcnt_t width); - void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel); - void pwm_lld_enable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_disable_periodic_notification(PWMDriver *pwmp); - void pwm_lld_enable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); - void pwm_lld_disable_channel_notification(PWMDriver *pwmp, - pwmchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PWM */ - -#endif /* HAL_PWM_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.c deleted file mode 100644 index bd1b81e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.c +++ /dev/null @@ -1,632 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/serial_lld.c - * @brief Tiva low level serial driver code. - * - * @addtogroup SERIAL - * @{ - */ - -#include "hal.h" - -#if HAL_USE_SERIAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief UART0 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) -SerialDriver SD1; -#endif - -/** - * @brief UART1 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) -SerialDriver SD2; -#endif - -/** - * @brief UART2 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) -SerialDriver SD3; -#endif - -/** - * @brief UART3 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) -SerialDriver SD4; -#endif - -/** - * @brief UART4 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) -SerialDriver SD5; -#endif - -/** - * @brief UART5 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) -SerialDriver SD6; -#endif - -/** - * @brief UART6 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) -SerialDriver SD7; -#endif - -/** - * @brief UART7 serial driver identifier. - */ -#if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) -SerialDriver SD8; -#endif - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/** - * @brief Driver default configuration. - */ -static const SerialConfig sd_default_config = -{ - SERIAL_DEFAULT_BITRATE, - TIVA_LCRH_FEN | TIVA_LCRH_WLEN_8, - TIVA_IFLS_TXIFLSEL_1_8_F | TIVA_IFLS_RXIFLSEL_1_8_E -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief UART initialization. - * - * @param[in] sdp communication channel associated to the UART - * @param[in] config the architecture-dependent serial driver configuration - */ -static void uart_init(SerialDriver *sdp, const SerialConfig *config) -{ - UART_TypeDef *u = sdp->uart; - uint32_t div; /* baud rate divisor */ - - /* disable the UART before any of the control registers are reprogrammed */ - u->CTL &= ~TIVA_CTL_UARTEN; - div = (((TIVA_SYSCLK * 8) / config->sc_speed) + 1) / 2; - u->IBRD = div / 64; /* integer portion of the baud rate divisor */ - u->FBRD = div % 64; /* fractional portion of the baud rate divisor */ - u->LCRH = config->sc_lcrh; /* set data format */ - u->IFLS = config->sc_ifls; - u->CTL |= TIVA_CTL_TXE | TIVA_CTL_RXE | TIVA_CTL_UARTEN; - u->IM |= TIVA_IM_RXIM | TIVA_IM_TXIM | TIVA_IM_RTIM; /* interrupts enable */ -} - -/** - * @brief UART de-initialization. - * - * @param[in] u pointer to an UART I/O block - */ -static void uart_deinit(UART_TypeDef *u) -{ - u->CTL &= ~TIVA_CTL_UARTEN; -} - -/** - * @brief Error handling routine. - * - * @param[in] sdp communication channel associated to the UART - * @param[in] err UART LSR register value - */ -static void set_error(SerialDriver *sdp, uint16_t err) -{ - eventflags_t sts = 0; - - if (err & TIVA_MIS_FEMIS) - sts |= SD_FRAMING_ERROR; - if (err & TIVA_MIS_PEMIS) - sts |= SD_PARITY_ERROR; - if (err & TIVA_MIS_BEMIS) - sts |= SD_BREAK_DETECTED; - if (err & TIVA_MIS_OEMIS) - sts |= SD_OVERRUN_ERROR; - osalSysLockFromISR(); - chnAddFlagsI(sdp, sts); - osalSysUnlockFromISR(); -} - -/** - * @brief Common IRQ handler. - * @note Tries hard to clear all the pending interrupt sources, we don't - * want to go through the whole ISR and have another interrupt soon - * after. - * - * @param[in] u pointer to an UART I/O block - * @param[in] sdp communication channel associated to the UART - */ -static void serial_serve_interrupt(SerialDriver *sdp) -{ - UART_TypeDef *u = sdp->uart; - uint16_t mis = u->MIS; - - u->ICR = mis; /* clear interrupts */ - - if (mis & (TIVA_MIS_FEMIS | TIVA_MIS_PEMIS | TIVA_MIS_BEMIS | TIVA_MIS_OEMIS)) { - set_error(sdp, mis); - } - - if ((mis & TIVA_MIS_RXMIS) || (mis & TIVA_MIS_RTMIS)) { - osalSysLockFromISR(); - if (iqIsEmptyI(&sdp->iqueue)) { - chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE); - } - osalSysUnlockFromISR(); - while ((u->FR & TIVA_FR_RXFE) == 0) { - osalSysLockFromISR(); - if (iqPutI(&sdp->iqueue, u->DR) < Q_OK) { - chnAddFlagsI(sdp, SD_OVERRUN_ERROR); - } - osalSysUnlockFromISR(); - } - } - - if (mis & TIVA_MIS_TXMIS) { - while ((u->FR & TIVA_FR_TXFF) == 0) { - msg_t b; - osalSysLockFromISR(); - b = oqGetI(&sdp->oqueue); - osalSysUnlockFromISR(); - if (b < Q_OK) { - u->IM &= ~TIVA_IM_TXIM; - osalSysLockFromISR(); - chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); - osalSysUnlockFromISR(); - break; - } - u->DR = b; - } - } -} - -/** - * @brief - */ -static void fifo_load(SerialDriver *sdp) -{ - UART_TypeDef *u = sdp->uart; - - while ((u->FR & TIVA_FR_TXFF) == 0) { - msg_t b = oqGetI(&sdp->oqueue); - if (b < Q_OK) { - chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); - return; - } - u->DR = b; - } - u->IM |= TIVA_IM_TXIM; /* transmit interrupt enable */ -} - -/** - * @brief Driver SD1 output notification. - */ -#if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) -static void notify1(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD1); -} -#endif - -/** - * @brief Driver SD2 output notification. - */ -#if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) -static void notify2(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD2); -} -#endif - -/** - * @brief Driver SD3 output notification. - */ -#if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) -static void notify3(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD3); -} -#endif - -/** - * @brief Driver SD4 output notification. - */ -#if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) -static void notify4(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD4); -} -#endif - -/** - * @brief Driver SD5 output notification. - */ -#if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) -static void notify5(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD5); -} -#endif - -/** - * @brief Driver SD6 output notification. - */ -#if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) -static void notify6(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD6); -} -#endif - -/** - * @brief Driver SD7 output notification. - */ -#if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) -static void notify7(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD7); -} -#endif - -/** - * @brief Driver SD8 output notification. - */ -#if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) -static void notify8(io_queue_t *qp) -{ - (void)qp; - fifo_load(&SD8); -} -#endif - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/** - * @brief UART0 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) -#if !defined(TIVA_UART0_HANDLER) -#error "TIVA_UART0_HANDLER not defined" -#endif -CH_IRQ_HANDLER(TIVA_UART0_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD1); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART1 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART1_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD2); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART2 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART2_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD3); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART3 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART3_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD4); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART4 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART4_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD5); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART5 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART5_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD6); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART6 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART6_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD7); - - CH_IRQ_EPILOGUE(); -} -#endif - -/** - * @brief UART7 IRQ handler. - */ -#if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(TIVA_UART7_HANDLER) -{ - CH_IRQ_PROLOGUE(); - - serial_serve_interrupt(&SD8); - - CH_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level serial driver initialization. - */ -void sd_lld_init(void) -{ -#if TIVA_SERIAL_USE_UART0 - sdObjectInit(&SD1, NULL, notify1); - SD1.uart = UART0; -#endif - -#if TIVA_SERIAL_USE_UART1 - sdObjectInit(&SD2, NULL, notify2); - SD2.uart = UART1; -#endif - -#if TIVA_SERIAL_USE_UART2 - sdObjectInit(&SD3, NULL, notify3); - SD3.uart = UART2; -#endif - -#if TIVA_SERIAL_USE_UART3 - sdObjectInit(&SD4, NULL, notify4); - SD4.uart = UART3; -#endif - -#if TIVA_SERIAL_USE_UART4 - sdObjectInit(&SD5, NULL, notify5); - SD5.uart = UART4; -#endif - -#if TIVA_SERIAL_USE_UART5 - sdObjectInit(&SD6, NULL, notify6); - SD6.uart = UART5; -#endif - -#if TIVA_SERIAL_USE_UART6 - sdObjectInit(&SD7, NULL, notify7); - SD7.uart = UART6; -#endif - -#if TIVA_SERIAL_USE_UART7 - sdObjectInit(&SD8, NULL, notify8); - SD8.uart = UART7; -#endif -} - -/** - * @brief Low level serial driver configuration and (re)start. - * - * @param[in] sdp pointer to a @p SerialDriver object - * @param[in] config the architecture-dependent serial driver configuration. - * If this parameter is set to @p NULL then a default - * configuration is used. - */ -void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) -{ - if (config == NULL) - config = &sd_default_config; - - if (sdp->state == SD_STOP) { -#if TIVA_SERIAL_USE_UART0 - if (&SD1 == sdp) { - SYSCTL->RCGCUART |= (1 << 0); - nvicEnableVector(TIVA_UART0_NUMBER, TIVA_SERIAL_UART0_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART1 - if (&SD2 == sdp) { - SYSCTL->RCGC.UART |= (1 << 1); - nvicEnableVector(TIVA_UART1_NUMBER, TIVA_SERIAL_UART1_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART2 - if (&SD3 == sdp) { - SYSCTL->RCGC.UART |= (1 << 2); /* enable UART2 module */ - nvicEnableVector(TIVA_UART2_NUMBER, TIVA_SERIAL_UART2_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART3 - if (&SD4 == sdp) { - SYSCTL->RCGC.UART |= (1 << 3); /* enable UART3 module */ - nvicEnableVector(TIVA_UART3_NUMBER, TIVA_SERIAL_UART3_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART4 - if (&SD5 == sdp) { - SYSCTL->RCGC.UART |= (1 << 4); /* enable UART4 module */ - nvicEnableVector(TIVA_UART4_NUMBER, TIVA_SERIAL_UART4_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART5 - if (&SD6 == sdp) { - SYSCTL->RCGC.UART |= (1 << 5); /* enable UART5 module */ - nvicEnableVector(TIVA_UART5_NUMBER, TIVA_SERIAL_UART5_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART6 - if (&SD7 == sdp) { - SYSCTL->RCGC.UART |= (1 << 6); /* enable UART6 module */ - nvicEnableVector(TIVA_UART6_NUMBER, TIVA_SERIAL_UART6_PRIORITY); - } -#endif -#if TIVA_SERIAL_USE_UART7 - if (&SD8 == sdp) { - SYSCTL->RCGC.UART |= (1 << 7); /* enable UART7 module */ - nvicEnableVector(TIVA_UART7_NUMBER, TIVA_SERIAL_UART7_PRIORITY); - } -#endif - } - uart_init(sdp, config); -} - -/** - * @brief Low level serial driver stop. - * @details De-initializes the UART, stops the associated clock, resets the - * interrupt vector. - * - * @param[in] sdp pointer to a @p SerialDriver object - */ -void sd_lld_stop(SerialDriver *sdp) -{ - if (sdp->state == SD_READY) { - uart_deinit(sdp->uart); -#if TIVA_SERIAL_USE_UART0 - if (&SD1 == sdp) { - SYSCTL->RCGCUART &= ~(1 << 0); /* disable UART0 module */ - nvicDisableVector(TIVA_UART0_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART1 - if (&SD2 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 1); /* disable UART1 module */ - nvicDisableVector(TIVA_UART1_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART2 - if (&SD3 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 2); /* disable UART2 module */ - nvicDisableVector(TIVA_UART2_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART3 - if (&SD4 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 3); /* disable UART3 module */ - nvicDisableVector(TIVA_UART3_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART4 - if (&SD5 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 4); /* disable UART4 module */ - nvicDisableVector(TIVA_UART4_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART5 - if (&SD6 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 5); /* disable UART5 module */ - nvicDisableVector(TIVA_UART5_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART6 - if (&SD7 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 6); /* disable UART6 module */ - nvicDisableVector(TIVA_UART6_NUMBER); - return; - } -#endif -#if TIVA_SERIAL_USE_UART7 - if (&SD8 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 7); /* disable UART7 module */ - nvicDisableVector(TIVA_UART7_NUMBER); - return; - } -#endif - } -} - -#endif /* CH_HAL_USE_SERIAL */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.h deleted file mode 100644 index 203ef6a..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_serial_lld.h +++ /dev/null @@ -1,482 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/serial_lld.h - * @brief Tiva low level serial driver header. - * - * @addtogroup SERIAL - * @{ - */ - -#ifndef HAL_SERIAL_LLD_H -#define HAL_SERIAL_LLD_H - -#if HAL_USE_SERIAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name FR register bits definitions - * @{ - */ - -#define TIVA_FR_CTS (1 << 0) - -#define TIVA_FR_BUSY (1 << 3) - -#define TIVA_FR_RXFE (1 << 4) - -#define TIVA_FR_TXFF (1 << 5) - -#define TIVA_FR_RXFF (1 << 6) - -#define TIVA_FR_TXFE (1 << 7) - -/** - * @} - */ - -/** - * @name LCRH register bits definitions - * @{ - */ - -#define TIVA_LCRH_BRK (1 << 0) - -#define TIVA_LCRH_PEN (1 << 1) - -#define TIVA_LCRH_EPS (1 << 2) - -#define TIVA_LCRH_STP2 (1 << 3) - -#define TIVA_LCRH_FEN (1 << 4) - -#define TIVA_LCRH_WLEN_MASK (3 << 5) -#define TIVA_LCRH_WLEN_5 (0 << 5) -#define TIVA_LCRH_WLEN_6 (1 << 5) -#define TIVA_LCRH_WLEN_7 (2 << 5) -#define TIVA_LCRH_WLEN_8 (3 << 5) - -#define TIVA_LCRH_SPS (1 << 7) - -/** - * @} - */ - -/** - * @name CTL register bits definitions - * @{ - */ - -#define TIVA_CTL_UARTEN (1 << 0) - -#define TIVA_CTL_SIREN (1 << 1) - -#define TIVA_CTL_SIRLP (1 << 2) - -#define TIVA_CTL_SMART (1 << 3) - -#define TIVA_CTL_EOT (1 << 4) - -#define TIVA_CTL_HSE (1 << 5) - -#define TIVA_CTL_LBE (1 << 7) - -#define TIVA_CTL_TXE (1 << 8) - -#define TIVA_CTL_RXE (1 << 9) - -#define TIVA_CTL_RTS (1 << 11) - -#define TIVA_CTL_RTSEN (1 << 14) - -#define TIVA_CTL_CTSEN (1 << 15) - -/** - * @} - */ - -/** - * @name IFLS register bits definitions - * @{ - */ - -#define TIVA_IFLS_TXIFLSEL_MASK (7 << 0) -#define TIVA_IFLS_TXIFLSEL_1_8_F (0 << 0) -#define TIVA_IFLS_TXIFLSEL_1_4_F (1 << 0) -#define TIVA_IFLS_TXIFLSEL_1_2_F (2 << 0) -#define TIVA_IFLS_TXIFLSEL_3_4_F (3 << 0) -#define TIVA_IFLS_TXIFLSEL_7_8_F (4 << 0) - -#define TIVA_IFLS_RXIFLSEL_MASK (7 << 3) -#define TIVA_IFLS_RXIFLSEL_7_8_E (0 << 3) -#define TIVA_IFLS_RXIFLSEL_3_4_E (1 << 3) -#define TIVA_IFLS_RXIFLSEL_1_2_E (2 << 3) -#define TIVA_IFLS_RXIFLSEL_1_4_E (3 << 3) -#define TIVA_IFLS_RXIFLSEL_1_8_E (4 << 3) - -/** - * @} - */ - -/** - * @name MIS register bits definitions - * @{ - */ - -#define TIVA_MIS_CTSMIS (1 << 1) - -#define TIVA_MIS_RXMIS (1 << 4) - -#define TIVA_MIS_TXMIS (1 << 5) - -#define TIVA_MIS_RTMIS (1 << 6) - -#define TIVA_MIS_FEMIS (1 << 7) - -#define TIVA_MIS_PEMIS (1 << 8) - -#define TIVA_MIS_BEMIS (1 << 9) - -#define TIVA_MIS_OEMIS (1 << 10) - -#define TIVA_MIS_9BITMIS (1 << 12) - -/** - * @} - */ - -/** - * @name IM register bits definitions - * @{ - */ - -#define TIVA_IM_CTSIM (1 << 1) - -#define TIVA_IM_RXIM (1 << 4) - -#define TIVA_IM_TXIM (1 << 5) - -#define TIVA_IM_RTIM (1 << 6) - -#define TIVA_IM_FEIM (1 << 7) - -#define TIVA_IM_PEIM (1 << 8) - -#define TIVA_IM_BEIM (1 << 9) - -#define TIVA_IM_OEIM (1 << 10) - -#define TIVA_IM_9BITIM (1 << 12) - -/** - * @} - */ -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief UART0 driver enable switch. - * @details If set to @p TRUE the support for UART0 is included. - * @note The default is @p TRUE. - */ -#if !defined(TIVA_SERIAL_USE_UART0) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART0 FALSE -#endif - -/** - * @brief UART1 driver enable switch. - * @details If set to @p TRUE the support for UART1 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART1) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART1 FALSE -#endif - -/** - * @brief UART2 driver enable switch. - * @details If set to @p TRUE the support for UART2 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART2) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART2 FALSE -#endif - -/** - * @brief UART3 driver enable switch. - * @details If set to @p TRUE the support for UART3 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART3) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART3 FALSE -#endif - -/** - * @brief UART4 driver enable switch. - * @details If set to @p TRUE the support for UART4 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART4) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART4 FALSE -#endif - -/** - * @brief UART5 driver enable switch. - * @details If set to @p TRUE the support for UART5 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART5) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART5 FALSE -#endif - -/** - * @brief UART6 driver enable switch. - * @details If set to @p TRUE the support for UART6 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART6) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART6 FALSE -#endif - -/** - * @brief UART7 driver enable switch. - * @details If set to @p TRUE the support for UART7 is included. - * @note The default is @p FALSE . - */ -#if !defined(TIVA_SERIAL_USE_UART7) || defined(__DOXYGEN__) -#define TIVA_SERIAL_USE_UART7 FALSE -#endif - -/** - * @brief UART0 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART0_PRIORITY 5 -#endif - -/** - * @brief UART1 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART1_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART1_PRIORITY 5 -#endif - -/** - * @brief UART2 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART2_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART2_PRIORITY 5 -#endif - -/** - * @brief UART3 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART3_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART3_PRIORITY 5 -#endif - -/** - * @brief UART4 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART4_PRIORITY 5 -#endif - -/** - * @brief UART5 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART5_PRIORITY 5 -#endif - -/** - * @brief UART6 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART6_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART6_PRIORITY 5 -#endif - -/** - * @brief UART7 interrupt priority level setting. - */ -#if !defined(TIVA_SERIAL_UART7_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SERIAL_UART7_PRIORITY 5 -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !TIVA_SERIAL_USE_UART0 && !TIVA_SERIAL_USE_UART1 && \ - !TIVA_SERIAL_USE_UART2 && !TIVA_SERIAL_USE_UART3 && \ - !TIVA_SERIAL_USE_UART4 && !TIVA_SERIAL_USE_UART5 && \ - !TIVA_SERIAL_USE_UART6 && !TIVA_SERIAL_USE_UART7 -#error "SERIAL driver activated but no UART peripheral assigned" -#endif - -#if TIVA_SERIAL_USE_UART0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART0_PRIORITY) -#error "Invalid IRQ priority assigned to UART0" -#endif - -#if TIVA_SERIAL_USE_UART1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART1_PRIORITY) -#error "Invalid IRQ priority assigned to UART1" -#endif - -#if TIVA_SERIAL_USE_UART2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART2_PRIORITY) -#error "Invalid IRQ priority assigned to UART2" -#endif - -#if TIVA_SERIAL_USE_UART3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART3_PRIORITY) -#error "Invalid IRQ priority assigned to UART3" -#endif - -#if TIVA_SERIAL_USE_UART4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART4_PRIORITY) -#error "Invalid IRQ priority assigned to UART4" -#endif - -#if TIVA_SERIAL_USE_UART5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART5_PRIORITY) -#error "Invalid IRQ priority assigned to UART5" -#endif - -#if TIVA_SERIAL_USE_UART6 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART6_PRIORITY) -#error "Invalid IRQ priority assigned to UART6" -#endif - -#if TIVA_SERIAL_USE_UART7 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SERIAL_UART7_PRIORITY) -#error "Invalid IRQ priority assigned to UART7" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Tiva Serial Driver configuration structure. - * @details An instance of this structure must be passed to @p sdStart() - * in order to configure and start a serial driver operations. - */ -typedef struct { - /** - * @brief Bit rate. - */ - uint32_t sc_speed; - /* End of the mandatory fields. */ - /** - * @brief Initialization value for the LCRH (Line Control) register. - */ - uint32_t sc_lcrh; - /** - * @brief Initialization value for the IFLS (Interrupt FIFO Level Select) - * register. - */ - uint32_t sc_ifls; -} SerialConfig; - -/** - * @brief @p SerialDriver specific data. - */ -#define _serial_driver_data \ - _base_asynchronous_channel_data \ - /* Driver state.*/ \ - sdstate_t state; \ - /* Input queue.*/ \ - input_queue_t iqueue; \ - /* Output queue.*/ \ - output_queue_t oqueue; \ - /* Input circular buffer.*/ \ - uint8_t ib[SERIAL_BUFFERS_SIZE]; \ - /* Output circular buffer.*/ \ - uint8_t ob[SERIAL_BUFFERS_SIZE]; \ - /* End of the mandatory fields.*/ \ - /* Pointer to the USART registers block.*/ \ - UART_TypeDef *uart; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if TIVA_SERIAL_USE_UART0 && !defined(__DOXYGEN__) -extern SerialDriver SD1; -#endif - -#if TIVA_SERIAL_USE_UART1 && !defined(__DOXYGEN__) -extern SerialDriver SD2; -#endif - -#if TIVA_SERIAL_USE_UART2 && !defined(__DOXYGEN__) -extern SerialDriver SD3; -#endif - -#if TIVA_SERIAL_USE_UART3 && !defined(__DOXYGEN__) -extern SerialDriver SD4; -#endif - -#if TIVA_SERIAL_USE_UART4 && !defined(__DOXYGEN__) -extern SerialDriver SD5; -#endif - -#if TIVA_SERIAL_USE_UART5 && !defined(__DOXYGEN__) -extern SerialDriver SD6; -#endif - -#if TIVA_SERIAL_USE_UART6 && !defined(__DOXYGEN__) -extern SerialDriver SD7; -#endif - -#if TIVA_SERIAL_USE_UART7 && !defined(__DOXYGEN__) -extern SerialDriver SD8; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void sd_lld_init(void); - void sd_lld_start(SerialDriver *sdp, const SerialConfig *config); - void sd_lld_stop(SerialDriver *sdp); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SERIAL */ - -#endif /* HAL_SERIAL_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.c deleted file mode 100644 index ded2b99..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.c +++ /dev/null @@ -1,685 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/spi_lld.c - * @brief TM4C123x/TM4C129x SPI subsystem low level driver. - * - * @addtogroup SPI - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#if HAL_USE_SPI || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief SPI1 driver identifier. - */ -#if TIVA_SPI_USE_SSI0 || defined(__DOXYGEN__) -SPIDriver SPID1; -#endif - -/** - * @brief SPI2 driver identifier. - */ -#if TIVA_SPI_USE_SSI1 || defined(__DOXYGEN__) -SPIDriver SPID2; -#endif - -/** - * @brief SPI3 driver identifier. - */ -#if TIVA_SPI_USE_SSI2 || defined(__DOXYGEN__) -SPIDriver SPID3; -#endif - -/** - * @brief SPI4 driver identifier. - */ -#if TIVA_SPI_USE_SSI3 || defined(__DOXYGEN__) -SPIDriver SPID4; -#endif - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -static uint16_t dummytx; -static uint16_t dummyrx; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Common IRQ handler. - * - * @param[in] spip pointer to the @p SPIDriver object - */ -static void spi_serve_interrupt(SPIDriver *spip) -{ - SSI_TypeDef *ssi = spip->ssi; - uint32_t mis = ssi->MIS; - uint32_t dmachis = UDMA->CHIS; - - /* SPI error handling.*/ - if ((mis & (TIVA_MIS_RORMIS | TIVA_MIS_RTMIS)) != 0) { - TIVA_SPI_SSI_ERROR_HOOK(spip); - } - - if ( (dmachis & ( (1 << spip->dmarxnr) | (1 << spip->dmatxnr) ) ) == - ( (1 << spip->dmarxnr) | (1 << spip->dmatxnr) ) ) { - /* Clear DMA Channel interrupts.*/ - UDMA->CHIS = (1 << spip->dmarxnr) | (1 << spip->dmatxnr); - - /* Portable SPI ISR code defined in the high level driver, note, it is a - macro.*/ - _spi_isr_code(spip); - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_SPI_USE_SSI0 || defined(__DOXYGEN__) -/** - * @brief SSI0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_SSI0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - spi_serve_interrupt(&SPID1); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_SPI_USE_SSI1 || defined(__DOXYGEN__) -/** - * @brief SSI1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_SSI1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - spi_serve_interrupt(&SPID2); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_SPI_USE_SSI2 || defined(__DOXYGEN__) -/** - * @brief SSI2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_SSI2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - spi_serve_interrupt(&SPID3); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_SPI_USE_SSI3 || defined(__DOXYGEN__) -/** - * @brief SSI3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_SSI3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - spi_serve_interrupt(&SPID4); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level SPI driver initialization. - * - * @notapi - */ -void spi_lld_init(void) -{ - dummytx = 0xFFFF; - -#if TIVA_SPI_USE_SSI0 - spiObjectInit(&SPID1); - SPID1.ssi = SSI0; - SPID1.dmarxnr = TIVA_SPI_SSI0_RX_UDMA_CHANNEL; - SPID1.dmatxnr = TIVA_SPI_SSI0_TX_UDMA_CHANNEL; - SPID1.rxchnmap = TIVA_SPI_SSI0_RX_UDMA_MAPPING; - SPID1.txchnmap = TIVA_SPI_SSI0_TX_UDMA_MAPPING; -#endif - -#if TIVA_SPI_USE_SSI1 - spiObjectInit(&SPID2); - SPID2.ssi = SSI1; - SPID2.dmarxnr = TIVA_SPI_SSI1_RX_UDMA_CHANNEL; - SPID2.dmatxnr = TIVA_SPI_SSI1_TX_UDMA_CHANNEL; - SPID2.rxchnmap = TIVA_SPI_SSI1_RX_UDMA_MAPPING; - SPID2.txchnmap = TIVA_SPI_SSI1_TX_UDMA_MAPPING; -#endif - -#if TIVA_SPI_USE_SSI2 - spiObjectInit(&SPID3); - SPID3.ssi = SSI2; - SPID3.dmarxnr = TIVA_SPI_SSI2_RX_UDMA_CHANNEL; - SPID3.dmatxnr = TIVA_SPI_SSI2_TX_UDMA_CHANNEL; - SPID3.rxchnmap = TIVA_SPI_SSI2_RX_UDMA_MAPPING; - SPID3.txchnmap = TIVA_SPI_SSI2_TX_UDMA_MAPPING; -#endif - -#if TIVA_SPI_USE_SSI3 - spiObjectInit(&SPID4); - SPID4.ssi = SSI3; - SPID4.dmarxnr = TIVA_SPI_SSI3_RX_UDMA_CHANNEL; - SPID4.dmatxnr = TIVA_SPI_SSI3_TX_UDMA_CHANNEL; - SPID4.rxchnmap = TIVA_SPI_SSI3_RX_UDMA_MAPPING; - SPID4.txchnmap = TIVA_SPI_SSI3_TX_UDMA_MAPPING; -#endif -} - -/** - * @brief Configures and activates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_start(SPIDriver *spip) -{ - if (spip->state == SPI_STOP) { - /* Clock activation.*/ -#if TIVA_SPI_USE_SSI0 - if (&SPID1 == spip) { - bool b; - b = udmaChannelAllocate(spip->dmarxnr); - osalDbgAssert(!b, "channel already allocated"); - b = udmaChannelAllocate(spip->dmatxnr); - osalDbgAssert(!b, "channel already allocated"); - - /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 0); - while (!(SYSCTL->PRSSI & (1 << 0))) - ; - - nvicEnableVector(TIVA_SSI0_NUMBER, TIVA_SPI_SSI0_IRQ_PRIORITY); - } -#endif -#if TIVA_SPI_USE_SSI1 - if (&SPID2 == spip) { - bool b; - b = udmaChannelAllocate(spip->dmarxnr); - osalDbgAssert(!b, "channel already allocated"); - b = udmaChannelAllocate(spip->dmatxnr); - osalDbgAssert(!b, "channel already allocated"); - - /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 1); - while (!(SYSCTL->PRSSI & (1 << 1))) - ; - - nvicEnableVector(TIVA_SSI1_NUMBER, TIVA_SPI_SSI1_IRQ_PRIORITY); - } -#endif -#if TIVASPI_USE_SSI2 - if (&SPID2 == spip) { - bool b; - b = udmaChannelAllocate(spip->dmarxnr); - osalDbgAssert(!b, "channel already allocated"); - b = udmaChannelAllocate(spip->dmatxnr); - osalDbgAssert(!b, "channel already allocated"); - - /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 2); - while (!(SYSCTL->PRSSI & (1 << 2))) - ; - - nvicEnableVector(TIVA_SSI2_NUMBER, TIVA_SPI_SSI2_IRQ_PRIORITY); - } -#endif -#if TIVA_SPI_USE_SSI3 - if (&SPID2 == spip) { - bool b; - b = udmaChannelAllocate(spip->dmarxnr); - osalDbgAssert(!b, "channel already allocated"); - b = udmaChannelAllocate(spip->dmatxnr); - osalDbgAssert(!b, "channel already allocated"); - - /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 3); - while (!(SYSCTL->PRSSI & (1 << 3))) - ; - - nvicEnableVector(TIVA_SSI3_NUMBER, TIVA_SPI_SSI3_IRQ_PRIORITY); - } -#endif - - UDMA->CHMAP[spip->dmarxnr / 8] |= (spip->rxchnmap << (spip->dmarxnr % 8)); - UDMA->CHMAP[spip->dmatxnr / 8] |= (spip->txchnmap << (spip->dmatxnr % 8)); - } - /* Set master operation mode.*/ - spip->ssi->CR1 = 0; - - /* Clock configuration - System Clock.*/ - spip->ssi->CC = 0; - - /* Clear pending interrupts.*/ - spip->ssi->ICR = TIVA_ICR_RTIC | TIVA_ICR_RORIC; - - /* Enable Receive Time-Out and Receive Overrun Interrupts.*/ - spip->ssi->IM = TIVA_IM_RTIM | TIVA_IM_RORIM; - - /* Configure the clock prescale divisor.*/ - spip->ssi->CPSR = spip->config->cpsr; - - /* Serial clock rate, phase/polarity, data size, fixed SPI frame format.*/ - spip->ssi->CR0 = (spip->config->cr0 & ~TIVA_CR0_FRF_MASK) | TIVA_CR0_FRF(0); - - /* Enable SSI.*/ - spip->ssi->CR1 |= TIVA_CR1_SSE; - - /* Enable RX and TX DMA channels.*/ - spip->ssi->DMACTL = (TIVA_DMACTL_TXDMAE | TIVA_DMACTL_RXDMAE); -} - -/** - * @brief Deactivates the SPI peripheral. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_stop(SPIDriver *spip) -{ - if (spip->state != SPI_STOP) { - spip->ssi->CR1 = 0; - spip->ssi->CR0 = 0; - spip->ssi->CPSR = 0; - - udmaChannelRelease(spip->dmarxnr); - udmaChannelRelease(spip->dmatxnr); - -#if TIVA_SPI_USE_SSI0 - if (&SPID1 == spip) { - nvicDisableVector(TIVA_SSI0_NUMBER); - } -#endif -#if TIVA_SPI_USE_SSI1 - if (&SPID2 == spip) { - nvicDisableVector(TIVA_SSI1_NUMBER); - } -#endif -#if TIVA_SPI_USE_SSI2 - if (&SPID3 == spip) { - nvicDisableVector(TIVA_SSI2_NUMBER); - } -#endif -#if TIVA_SPI_USE_SSI3 - if (&SPID4 == spip) { - nvicDisableVector(TIVA_SSI3_NUMBER); - } -#endif - } -} - -/** - * @brief Asserts the slave select signal and prepares for transfers. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_select(SPIDriver *spip) -{ - palClearPad(spip->config->ssport, spip->config->sspad); -} - -/** - * @brief Deasserts the slave select signal. - * @details The previously selected peripheral is unselected. - * - * @param[in] spip pointer to the @p SPIDriver object - * - * @notapi - */ -void spi_lld_unselect(SPIDriver *spip) -{ - palSetPad(spip->config->ssport, spip->config->sspad); -} - -/** - * @brief Ignores data on the SPI bus. - * @details This function transmits a series of idle words on the SPI bus and - * ignores the received data. This function can be invoked even - * when a slave select signal has not been yet asserted. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be ignored - * - * @notapi - */ -void spi_lld_ignore(SPIDriver *spip, size_t n) -{ - tiva_udma_table_entry_t *primary = udmaControlTable.primary; - - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { - /* Configure for 8-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; - primary[spip->dmarxnr].dstendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - else { - /* Configure for 16-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; - primary[spip->dmarxnr].dstendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - - dmaChannelSingleBurst(spip->dmatxnr); - dmaChannelPrimary(spip->dmatxnr); - dmaChannelPriorityDefault(spip->dmatxnr); - dmaChannelEnableRequest(spip->dmatxnr); - - dmaChannelSingleBurst(spip->dmarxnr); - dmaChannelPrimary(spip->dmarxnr); - dmaChannelPriorityDefault(spip->dmarxnr); - dmaChannelEnableRequest(spip->dmarxnr); - - /* Enable DMA channels, when the TX channel is enabled the transfer starts.*/ - dmaChannelEnable(spip->dmarxnr); - dmaChannelEnable(spip->dmatxnr); -} - -/** - * @brief Exchanges data on the SPI bus. - * @details This asynchronous function starts a simultaneous transmit/receive - * operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to be exchanged - * @param[in] txbuf the pointer to the transmit buffer - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_exchange(SPIDriver *spip, size_t n, const void *txbuf, void *rxbuf) -{ - tiva_udma_table_entry_t *primary = udmaControlTable.primary; - - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { - /* Configure for 8-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+n-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_8 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; - primary[spip->dmarxnr].dstendp = rxbuf+n-1; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - else { - /* Configure for 16-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+(n*2)-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_16 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; - primary[spip->dmarxnr].dstendp = rxbuf+(n*2)-1; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_16 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - - dmaChannelSingleBurst(spip->dmatxnr); - dmaChannelPrimary(spip->dmatxnr); - dmaChannelPriorityDefault(spip->dmatxnr); - dmaChannelEnableRequest(spip->dmatxnr); - - dmaChannelSingleBurst(spip->dmarxnr); - dmaChannelPrimary(spip->dmarxnr); - dmaChannelPriorityDefault(spip->dmarxnr); - dmaChannelEnableRequest(spip->dmarxnr); - - /* Enable DMA channels, when the TX channel is enabled the transfer starts.*/ - dmaChannelEnable(spip->dmarxnr); - dmaChannelEnable(spip->dmatxnr); -} - -/** - * @brief Sends data over the SPI bus. - * @details This asynchronous function starts a transmit operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to send - * @param[in] txbuf the pointer to the transmit buffer - * - * @notapi - */ -void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) -{ - tiva_udma_table_entry_t *primary = udmaControlTable.primary; - - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { - /* Configure for 8-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+n-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_8 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].dstendp = &spip->ssi->DR; - primary[spip->dmarxnr].srcendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - else { - /* Configure for 16-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+(n*2)-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_16 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].dstendp = &spip->ssi->DR; - primary[spip->dmarxnr].srcendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - - dmaChannelSingleBurst(spip->dmatxnr); - dmaChannelPrimary(spip->dmatxnr); - dmaChannelPriorityDefault(spip->dmatxnr); - dmaChannelEnableRequest(spip->dmatxnr); - - dmaChannelSingleBurst(spip->dmarxnr); - dmaChannelPrimary(spip->dmarxnr); - dmaChannelPriorityDefault(spip->dmarxnr); - dmaChannelEnableRequest(spip->dmarxnr); - - /* Enable DMA channels, when the TX channel is enabled the transfer starts.*/ - dmaChannelEnable(spip->dmarxnr); - dmaChannelEnable(spip->dmatxnr); -} - -/** - * @brief Receives data from the SPI bus. - * @details This asynchronous function starts a receive operation. - * @post At the end of the operation the configured callback is invoked. - * @note The buffers are organized as uint8_t arrays for data sizes below or - * equal to 8 bits else it is organized as uint16_t arrays. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] n number of words to receive - * @param[out] rxbuf the pointer to the receive buffer - * - * @notapi - */ -void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) -{ - tiva_udma_table_entry_t *primary = udmaControlTable.primary; - - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { - /* Configure for 8-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; - primary[spip->dmarxnr].dstendp = rxbuf+n-1; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - else { - /* Configure for 16-bit transfers.*/ - primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; - primary[spip->dmarxnr].dstendp = rxbuf+(n*2)-1; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_16 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | - UDMA_CHCTL_ARBSIZE_4 | - UDMA_CHCTL_XFERSIZE(n) | - UDMA_CHCTL_XFERMODE_BASIC; - } - - dmaChannelSingleBurst(spip->dmatxnr); - dmaChannelPrimary(spip->dmatxnr); - dmaChannelPriorityDefault(spip->dmatxnr); - dmaChannelEnableRequest(spip->dmatxnr); - - dmaChannelSingleBurst(spip->dmarxnr); - dmaChannelPrimary(spip->dmarxnr); - dmaChannelPriorityDefault(spip->dmarxnr); - dmaChannelEnableRequest(spip->dmarxnr); - - /* Enable DMA channels, when the TX channel is enabled the transfer starts.*/ - dmaChannelEnable(spip->dmarxnr); - dmaChannelEnable(spip->dmatxnr); -} - -/** - * @brief Exchanges one frame using a polled wait. - * @details This synchronous function exchanges one frame using a polled - * synchronization method. This function is useful when exchanging - * small amount of data on high speed channels, usually in this - * situation is much more efficient just wait for completion using - * polling than suspending the thread waiting for an interrupt. - * - * @param[in] spip pointer to the @p SPIDriver object - * @param[in] frame the data frame to send over the SPI bus - * @return The received data frame from the SPI bus. - */ -uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) -{ - spip->ssi->DR = (uint32_t)frame; - while ((spip->ssi->SR & TIVA_SR_RNE) == 0) - ; - return (uint16_t)spip->ssi->DR; -} - -#endif /* HAL_USE_SPI */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.h deleted file mode 100644 index 2adc9ed..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_spi_lld.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/spi_lld.h - * @brief TM4C123x/TM4C129x SPI subsystem low level driver. - * - * @addtogroup SPI - * @{ - */ - -#ifndef HAL_SPI_LLD_H -#define HAL_SPI_LLD_H - -#if HAL_USE_SPI || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name Control 0 - * @{ - */ -#define TIVA_CR0_DSS_MASK 0x0F -#define TIVA_CR0_DSS(n) ((n-1) << 0) - -#define TIVA_CR0_FRF_MASK (3 << 4) -#define TIVA_CR0_FRF(n) ((n) << 4) - -#define TIVA_CR0_SPO (1 << 6) -#define TIVA_CR0_SPH (1 << 7) - -#define TIVA_CR0_SRC_MASK (0xFF << 8) -#define TIVA_CR0_SRC(n) ((n) << 8) -/** @} */ - -/** - * @name Control 1 - * @{ - */ -#define TIVA_CR1_LBM (1 << 0) -#define TIVA_CR1_SSE (1 << 1) -#define TIVA_CR1_MS (1 << 2) -#define TIVA_CR1_SOD (1 << 3) -#define TIVA_CR1_EOT (1 << 4) -/** @} */ - -/** - * @name Status - * @{ - */ -#define TIVA_SR_TFE (1 << 0) -#define TIVA_SR_TNF (1 << 1) -#define TIVA_SR_RNE (1 << 2) -#define TIVA_SR_RFF (1 << 3) -#define TIVA_SR_BSY (1 << 4) -/** @} */ - -/** - * @name Interrupt Mask - * @{ - */ -#define TIVA_IM_RORIM (1 << 0) -#define TIVA_IM_RTIM (1 << 1) -#define TIVA_IM_RXIM (1 << 2) -#define TIVA_IM_TXIM (1 << 3) -/** @} */ - -/** - * @name Interrupt Status - * @{ - */ -#define TIVA_IS_RORIS (1 << 0) -#define TIVA_IS_RTIS (1 << 1) -#define TIVA_IS_RXIS (1 << 2) -#define TIVA_IS_TXIS (1 << 3) -/** @} */ - -/** - * @name Masked Interrupt Status - * @{ - */ -#define TIVA_MIS_RORMIS (1 << 0) -#define TIVA_MIS_RTMIS (1 << 1) -#define TIVA_MIS_RXMIS (1 << 2) -#define TIVA_MIS_TXMIS (1 << 3) -/** @} */ - -/** - * @name Interrupt Clear - * @{ - */ -#define TIVA_ICR_RORIC (1 << 0) -#define TIVA_ICR_RTIC (1 << 1) -/** @} */ - -/** - * @name DMA Control - * @{ - */ -#define TIVA_DMACTL_RXDMAE (1 << 0) -#define TIVA_DMACTL_TXDMAE (1 << 1) -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief SSI0 driver enable switch. - * @details If set to @p TRUE the support for SSI0 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_SPI_USE_SSI0) || defined(__DOXYGEN__) -#define TIVA_SPI_USE_SSI0 FALSE -#endif - -/** - * @brief SSI1 driver enable switch. - * @details If set to @p TRUE the support for SSI1 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_SPI_USE_SSI1) || defined(__DOXYGEN__) -#define TIVA_SPI_USE_SSI1 FALSE -#endif - -/** - * @brief SSI2 driver enable switch. - * @details If set to @p TRUE the support for SSI2 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_SPI_USE_SSI2) || defined(__DOXYGEN__) -#define TIVA_SPI_USE_SSI2 FALSE -#endif - -/** - * @brief SSI3 driver enable switch. - * @details If set to @p TRUE the support for SSI3 is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_SPI_USE_SSI3) || defined(__DOXYGEN__) -#define TIVA_SPI_USE_SSI3 FALSE -#endif - -/** - * @brief SPID1 interrupt priority level setting. - */ -#if !defined(TIVA_SPI_SSI0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SPI_SSI0_IRQ_PRIORITY 5 -#endif - -/** - * @brief SPID2 interrupt priority level setting. - */ -#if !defined(TIVA_SPI_SSI1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SPI_SSI1_IRQ_PRIORITY 5 -#endif - -/** - * @brief SPID3 interrupt priority level setting. - */ -#if !defined(TIVA_SPI_SSI2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SPI_SSI2_IRQ_PRIORITY 5 -#endif - -/** - * @brief SPID4 interrupt priority level setting. - */ -#if !defined(TIVA_SPI_SSI3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_SPI_SSI3_IRQ_PRIORITY 5 -#endif - -/** - * @brief SPI error hook. - */ -#if !defined(TIVA_SPI_SSI_ERROR_HOOK) || defined(__DOXYGEN__) -#define TIVA_SPI_SSI_ERROR_HOOK(spip) osalSysHalt("SSI failure") -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if TIVA_SPI_USE_SSI0 && !TIVA_HAS_SSI0 -#error "SSI0 not present in the selected device" -#endif - -#if TIVA_SPI_USE_SSI1 && !TIVA_HAS_SSI1 -#error "SSI1 not present in the selected device" -#endif - -#if TIVA_SPI_USE_SSI2 && !TIVA_HAS_SSI2 -#error "SSI2 not present in the selected device" -#endif - -#if TIVA_SPI_USE_SSI3 && !TIVA_HAS_SSI03 -#error "SSI3 not present in the selected device" -#endif - -#if !TIVA_SPI_USE_SSI0 && !TIVA_SPI_USE_SSI1 && !TIVA_SPI_USE_SSI2 && \ - !TIVA_SPI_USE_SSI3 -#error "SPI driver activated but no SSI peripheral assigned" -#endif - -#if TIVA_SPI_USE_SSI0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SSI0" -#endif - -#if TIVA_SPI_USE_SSI1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SSI1" -#endif - -#if TIVA_SPI_USE_SSI2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SSI2" -#endif - -#if TM4C123x_SPI_USE_SSI3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to SSI3" -#endif - -#if !defined(TIVA_UDMA_REQUIRED) -#define TIVA_UDMA_REQUIRED -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an SPI driver. - */ -typedef struct SPIDriver SPIDriver; - -/** - * @brief SPI notification callback type. - * - * @param[in] spip pointer to the @p SPIDriver object triggering the - * callback - */ -typedef void (*spicallback_t)(SPIDriver *spip); - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /** - * @brief Operation complete callback or @p NULL. - */ - spicallback_t end_cb; - /* End of the mandatory fields.*/ - /** - * @brief The chip select line port. - */ - ioportid_t ssport; - /** - * @brief The chip select line pad number. - */ - uint16_t sspad; - /** - * @brief SSI CR0 initialization data. - */ - uint16_t cr0; - /** - * @brief SSI CPSR initialization data. - */ - uint32_t cpsr; -} SPIConfig; - -/** - * @brief Structure representing a SPI driver. - */ -struct SPIDriver { - /** - * @brief Driver state. - */ - spistate_t state; - /** - * @brief Current configuration data. - */ - const SPIConfig *config; -#if SPI_USE_WAIT || defined(__DOXYGEN__) - /** - * @brief Waiting thread. - */ - thread_reference_t thread; -#endif /* SPI_USE_WAIT */ -#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the bus. - */ - mutex_t mutex; -#endif /* SPI_USE_MUTUAL_EXCLUSION */ -#if defined(SPI_DRIVER_EXT_FIELDS) - SPI_DRIVER_EXT_FIELDS -#endif - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the SSI registers block. - */ - SSI_TypeDef *ssi; - /** - * @brief Receive DMA channel number. - */ - uint8_t dmarxnr; - /** - * @brief Transmit DMA channel number. - */ - uint8_t dmatxnr; - /** - * @brief Receive DMA channel map. - */ - uint8_t rxchnmap; - /** - * @brief Transmit DMA channel map. - */ - uint8_t txchnmap; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if TIVA_SPI_USE_SSI0 && !defined(__DOXYGEN__) -extern SPIDriver SPID1; -#endif - -#if TIVA_SPI_USE_SSI1 && !defined(__DOXYGEN__) -extern SPIDriver SPID2; -#endif - -#if TIVA_SPI_USE_SSI2 && !defined(__DOXYGEN__) -extern SPIDriver SPID3; -#endif - -#if TIVA_SPI_USE_SSI3 && !defined(__DOXYGEN__) -extern SPIDriver SPID4; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void spi_lld_init(void); - void spi_lld_start(SPIDriver *spip); - void spi_lld_stop(SPIDriver *spip); - void spi_lld_select(SPIDriver *spip); - void spi_lld_unselect(SPIDriver *spip); - void spi_lld_ignore(SPIDriver *spip, size_t n); - void spi_lld_exchange(SPIDriver *spip, size_t n, - const void *txbuf, void *rxbuf); - void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf); - void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf); - uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_SPI */ - -#endif /* HAL_SPI_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.c deleted file mode 100644 index 30fdb8a..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/LLD/st_lld.c - * @brief ST Driver subsystem low level driver code. - * - * @addtogroup ST - * @{ - */ - -#include "hal.h" - -#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING - -#if (TIVA_ST_USE_WIDE_TIMER == TRUE) - -#if TIVA_ST_TIMER_NUMBER == 0 -#define ST_HANDLER TIVA_WGPT0A_HANDLER -#define ST_NUMBER TIVA_WGPT0A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 0)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 0))) - -#elif TIVA_ST_TIMER_NUMBER == 1 -#define ST_HANDLER TIVA_WGPT1A_HANDLER -#define ST_NUMBER TIVA_WGPT1A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 1)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 1))) - -#elif TIVA_ST_TIMER_NUMBER == 2 -#define ST_HANDLER TIVA_WGPT2A_HANDLER -#define ST_NUMBER TIVA_WGPT2A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 2)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 2))) - -#elif TIVA_ST_TIMER_NUMBER == 3 -#define ST_HANDLER TIVA_WGPT3A_HANDLER -#define ST_NUMBER TIVA_WGPT3A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 3)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 3))) - -#elif TIVA_ST_TIMER_NUMBER == 4 -#define ST_HANDLER TIVA_WGPT4A_HANDLER -#define ST_NUMBER TIVA_WGPT4A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 4)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 4))) - -#elif TIVA_ST_TIMER_NUMBER == 5 -#define ST_HANDLER TIVA_WGPT5A_HANDLER -#define ST_NUMBER TIVA_WGPT5A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 5)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 5))) - -#else -#error "TIVA_ST_USE_TIMER specifies an unsupported timer" -#endif - -#if (ST_CLOCK_SRC / OSAL_ST_FREQUENCY) - 1 > 0xFFFF -#error "the selected ST frequency is not obtainable because TIM timer prescaler limits" -#endif - -#elif (TIVA_ST_USE_WIDE_TIMER == FALSE) - -#if TIVA_ST_TIMER_NUMBER == 0 -#define ST_HANDLER TIVA_GPT0A_HANDLER -#define ST_NUMBER TIVA_GPT0A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 0)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 0))) - -#elif TIVA_ST_TIMER_NUMBER == 1 -#define ST_HANDLER TIVA_GPT1A_HANDLER -#define ST_NUMBER TIVA_GPT1A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 1)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 1))) - -#elif TIVA_ST_TIMER_NUMBER == 2 -#define ST_HANDLER TIVA_GPT2A_HANDLER -#define ST_NUMBER TIVA_GPT2A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 2)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 2))) - -#elif TIVA_ST_TIMER_NUMBER == 3 -#define ST_HANDLER TIVA_GPT3A_HANDLER -#define ST_NUMBER TIVA_GPT3A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 3)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 3))) - -#elif TIVA_ST_TIMER_NUMBER == 4 -#define ST_HANDLER TIVA_GPT4A_HANDLER -#define ST_NUMBER TIVA_GPT4A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 4)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 4))) - -#elif TIVA_ST_TIMER_NUMBER == 5 -#define ST_HANDLER TIVA_GPT5A_HANDLER -#define ST_NUMBER TIVA_GPT5A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 5)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 5))) - -#else -#error "TIVA_ST_USE_TIMER specifies an unsupported timer" -#endif - -#if (TIVA_SYSCLK / OSAL_ST_FREQUENCY) - 1 > 0xFF -#error "the selected ST frequency is not obtainable because TIM timer prescaler limits" -#endif - -#endif - -#if TIVA_SYSCLK % OSAL_ST_FREQUENCY != 0 -#error "the selected ST frequency is not obtainable because integer rounding" -#endif - -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__) -/** - * @brief System Timer vector. - * @details This interrupt is used for system tick in periodic mode. - * - * @isr - */ -OSAL_IRQ_HANDLER(SysTick_Handler) -{ - OSAL_IRQ_PROLOGUE(); - - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - - OSAL_IRQ_EPILOGUE(); -} -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ - -#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__) -/** - * @brief GPT interrupt handler. - * @details This interrupt is used for system tick in free running mode. - * - * @isr - */ -OSAL_IRQ_HANDLER(ST_HANDLER) -{ - uint32_t mis; - - OSAL_IRQ_PROLOGUE(); - - mis = TIVA_ST_TIM->MIS; - TIVA_ST_TIM->ICR = mis; - - if (mis & GPTM_IMR_TAMIM) { - osalSysLockFromISR(); - osalOsTimerHandlerI(); - osalSysUnlockFromISR(); - } - - OSAL_IRQ_EPILOGUE(); -} -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level ST driver initialization. - * - * @notapi - */ -void st_lld_init(void) -{ -#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING - /* Free running counter mode.*/ - - /* Enabling timer clock.*/ - ST_ENABLE_CLOCK(); - - /* Wait until timer peripheral is ready */ - ST_WAIT_CLOCK(); - - /* Initializing the counter in free running down mode.*/ - TIVA_ST_TIM->CTL = 0; - TIVA_ST_TIM->CFG = GPTM_CFG_CFG_SPLIT; /* Timer split mode */ - TIVA_ST_TIM->TAMR = (GPTM_TAMR_TAMR_PERIODIC |/* Periodic mode */ - GPTM_TAMR_TAMIE | /* Match interrupt enable */ - GPTM_TAMR_TASNAPS); /* Snapshot mode */ - - TIVA_ST_TIM->TAPR = (TIVA_SYSCLK / OSAL_ST_FREQUENCY) - 1; - TIVA_ST_TIM->CTL = (GPTM_CTL_TAEN | /* Timer A enable */ - GPTM_CTL_TASTALL); /* Timer A stall when paused */ - - /* IRQ enabled.*/ - nvicEnableVector(ST_NUMBER, TIVA_ST_IRQ_PRIORITY); -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */ - -#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC - /* Periodic systick mode, the Cortex-Mx internal systick timer is used - in this mode.*/ - SysTick->LOAD = (TIVA_SYSCLK / OSAL_ST_FREQUENCY) - 1; - SysTick->VAL = 0; - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_ENABLE_Msk | - SysTick_CTRL_TICKINT_Msk; - - /* IRQ enabled.*/ - nvicSetSystemHandlerPriority(HANDLER_SYSTICK, TIVA_ST_IRQ_PRIORITY); -#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */ -} - -#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.h deleted file mode 100644 index 35bf008..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_st_lld.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/LLD/st_lld.h - * @brief ST Driver subsystem low level driver header. - * @details This header is designed to be include-able without having to - * include other files from the HAL. - * - * @addtogroup ST - * @{ - */ - -#ifndef HAL_ST_LLD_H -#define HAL_ST_LLD_H - -#include "mcuconf.h" -#include "tiva_registry.h" -#include "tiva_gpt.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -/** - * @brief SysTick timer IRQ priority. - */ -#if !defined(TIVA_ST_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_ST_IRQ_PRIORITY 2 -#endif - -/** - * @brief GPTx unit (by number) to be used for free running operations. - * @note You must select a 32 bits timer if a 32 bits @p systick_t type - * is required. - */ -#if !defined(TIVA_ST_TIMER_NUMBER) || defined(__DOXYGEN__) -#define TIVA_ST_TIMER_NUMBER 0 -#endif - -/** - * @brief When set to @p TRUE a wide timer is used. When set to @p FALSE a - * normal timer is used. - */ -#if !defined(TIVA_ST_USE_WIDE_TIMER) || defined(__DOXYGEN__) -#define TIVA_ST_USE_WIDE_TIMER TRUE -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if (TIVA_ST_USE_WIDE_TIMER == TRUE) - -#if TIVA_ST_TIMER_NUMBER == 0 -#if !TIVA_HAS_WGPT0 -#error "WGPT0 not present" -#endif -#define TIVA_ST_TIM WGPT0 - -#elif TIVA_ST_TIMER_NUMBER == 1 -#if !TIVA_HAS_WGPT1 -#error "WGPT1 not present" -#endif -#define TIVA_ST_TIM WGPT1 - -#elif TIVA_ST_TIMER_NUMBER == 2 -#if !TIVA_HAS_WGPT2 -#error "WGPT2 not present" -#endif -#define TIVA_ST_TIM WGPT2 - -#elif TIVA_ST_TIMER_NUMBER == 3 -#if !TIVA_HAS_WGPT3 -#error "WGPT3 not present" -#endif -#define TIVA_ST_TIM WGPT3 - -#elif TIVA_ST_TIMER_NUMBER == 4 -#if !TIVA_HAS_WGPT4 -#error "WGPT4 not present" -#endif -#define TIVA_ST_TIM WGPT4 - -#elif TIVA_ST_TIMER_NUMBER == 5 -#if !TIVA_HAS_WGPT5 -#error "WGPT5 not present" -#endif -#define TIVA_ST_TIM WGPT5 - -#else -#error "TIVA_ST_USE_TIMER specifies an unsupported timer" -#endif - -#elif (TIVA_ST_USE_WIDE_TIMER == FALSE) - -#if TIVA_ST_TIMER_NUMBER == 0 -#if !TIVA_HAS_GPT0 -#error "GPT0 not present" -#endif -#define TIVA_ST_TIM GPT0 - -#elif TIVA_ST_TIMER_NUMBER == 1 -#if !TIVA_HAS_GPT1 -#error "GPT1 not present" -#endif -#define TIVA_ST_TIM GPT1 - -#elif TIVA_ST_TIMER_NUMBER == 2 -#if !TIVA_HAS_GPT2 -#error "GPT2 not present" -#endif -#define TIVA_ST_TIM GPT2 - -#elif TIVA_ST_TIMER_NUMBER == 3 -#if !TIVA_HAS_GPT3 -#error "GPT3 not present" -#endif -#define TIVA_ST_TIM GPT3 - -#elif TIVA_ST_TIMER_NUMBER == 4 -#if !TIVA_HAS_GPT4 -#error "GPT4 not present" -#endif -#define TIVA_ST_TIM GPT4 - -#elif TIVA_ST_TIMER_NUMBER == 5 -#if !TIVA_HAS_GPT5 -#error "GPT5 not present" -#endif -#define TIVA_ST_TIM GPT5 - -#else -#error "TIVA_ST_TIMER_NUMBER specifies an unsupported timer" -#endif - -#else -#error "wrong value defined for TIVA_ST_USE_WIDE_TIMER" -#endif - -#if OSAL_ST_MODE != OSAL_ST_MODE_NONE && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_ST_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to ST" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void st_lld_init(void); -#ifdef __cplusplus -} -#endif - -/*===========================================================================*/ -/* Driver inline functions. */ -/*===========================================================================*/ - -/** - * @brief Returns the time counter value. - * - * @return The counter value. - * - * @notapi - */ -static inline systime_t st_lld_get_counter(void) -{ - return (systime_t) (((systime_t) 0xffffffff) - TIVA_ST_TIM->TAR); -} - -/** - * @brief Starts the alarm. - * @note Makes sure that no spurious alarms are triggered after - * this call. - * - * @param[in] time the time to be set for the first alarm - * - * @notapi - */ -static inline void st_lld_start_alarm(systime_t time) -{ - TIVA_ST_TIM->TAMATCHR = (systime_t) (((systime_t) 0xffffffff) - time); - TIVA_ST_TIM->ICR = TIVA_ST_TIM->MIS; - TIVA_ST_TIM->IMR = GPTM_IMR_TAMIM; -} - -/** - * @brief Stops the alarm interrupt. - * - * @notapi - */ -static inline void st_lld_stop_alarm(void) -{ - TIVA_ST_TIM->IMR = 0; -} - -/** - * @brief Sets the alarm time. - * - * @param[in] time the time to be set for the next alarm - * - * @notapi - */ -static inline void st_lld_set_alarm(systime_t time) -{ - TIVA_ST_TIM->TAMATCHR = (systime_t) (((systime_t) 0xffffffff) - time); -} - -/** - * @brief Returns the current alarm time. - * - * @return The currently set alarm time. - * - * @notapi - */ -static inline systime_t st_lld_get_alarm(void) -{ - return (systime_t) (((systime_t)0xffffffff) - TIVA_ST_TIM->TAMATCHR); -} - -/** - * @brief Determines if the alarm is active. - * - * @return The alarm status. - * @retval false if the alarm is not active. - * @retval true is the alarm is active - * - * @notapi - */ -static inline bool st_lld_is_alarm_active(void) -{ - return (bool) ((TIVA_ST_TIM->IMR & GPTM_IMR_TAMIM) !=0); -} - -#endif /* HAL_ST_LLD_H */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.c deleted file mode 100644 index 38dcef0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - - -/** - * @file TIVA/wdg_lld.c - * @brief WDG Driver subsystem low level driver source. - * - * @addtogroup WDG - * @{ - */ - -#include "hal.h" - -#if HAL_USE_WDG || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -#if TIVA_WDG_USE_WDT0 || defined(__DOXYGEN__) -WDGDriver WDGD1; -#endif /* TIVA_WDG_USE_WDT0 */ - -#if TIVA_WDG_USE_WDT1 || defined(__DOXYGEN__) -WDGDriver WDGD2; -#endif /* TIVA_WDG_USE_WDT1 */ - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Shared IRQ handler. - * - * @param[in] wdgp pointer to @p WDGDriver object. - */ -static void serve_interrupt(WDGDriver *wdgp) -{ - uint32_t mis; - - mis = wdgp->wdt->MIS; - - if (mis & MIS_WDTMIS) { - /* Invoke callback, if any */ - if (wdgp->config->callback) { - if (wdgp->config->callback(wdgp)) { - /* Clear interrupt */ - wdgp->wdt->ICR = 0; - wdgTivaSyncWrite(wdgp); - } - } - } -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_WDG_USE_WDT0 || TIVA_WDG_USE_WDT1 -/** - * @brief WDT0/WDT1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_WDT_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - -#if TIVA_WDG_USE_WDT0 - serve_interrupt(&WDGD1); -#endif - -#if TIVA_WDG_USE_WDT1 - serve_interrupt(&WDGD2); -#endif - - OSAL_IRQ_EPILOGUE(); -} -#endif /* TIVA_WDG_USE_WDT0 || TIVA_WDG_USE_WDT1 */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level WDG driver initialization. - * - * @notapi - */ -void wdg_lld_init(void) -{ -#if TIVA_WDG_USE_WDT0 - WDGD1.state = WDG_STOP; - WDGD1.wdt = WDT0; -#endif /* TIVA_WDG_USE_WDT0 */ - -#if TIVA_WDG_USE_WDT1 - WDGD2.state = WDG_STOP; - WDGD2.wdt = WDT1; -#endif /* TIVA_WDG_USE_WDT1 */ - - /* The shared vector is initialized on driver initialization and never - disabled because it is shared between the Watchdog Timers.*/ - nvicEnableVector(TIVA_WDT_NUMBER, TIVA_WDG_WDT_IRQ_PRIORITY); -} - -/** - * @brief Configures and activates the WDG peripheral. - * - * @param[in] wdgp pointer to the @p WDGDriver object - * - * @notapi - */ -void wdg_lld_start(WDGDriver *wdgp) -{ -#if TIVA_WDG_USE_WDT0 - if (&WDGD1 == wdgp) { - SYSCTL->RCGCWD |= (1 << 0); - - while (!(SYSCTL->PRWD & (1 << 0))) - ; - } -#endif /* TIVA_WDG_USE_WDT0 */ - -#if TIVA_WDG_USE_WDT1 - if (&WDGD2 == wdgp) { - SYSCTL->RCGCWD |= (1 << 1); - - while (!(SYSCTL->PRWD & (1 << 1))) - ; - } -#endif /* TIVA_WDG_USE_WDT1 */ - - wdgp->wdt->LOAD = wdgp->config->load; - wdgTivaSyncWrite(wdgp); - - wdgp->wdt->TEST = wdgp->config->test; - wdgTivaSyncWrite(wdgp); - - wdgp->wdt->CTL |= CTL_RESEN; - wdgTivaSyncWrite(wdgp); - - wdgp->wdt->CTL |= CTL_INTEN; - wdgTivaSyncWrite(wdgp); -} - -/** - * @brief Deactivates the WDG peripheral. - * - * @param[in] wdgp pointer to the @p WDGDriver object - * - * @api - */ -void wdg_lld_stop(WDGDriver *wdgp) -{ -#if TIVA_WDG_USE_WDT0 - if (&WDGD1 == wdgp) { - SYSCTL->SRWD |= (1 << 0); - SYSCTL->SRWD &= ~(1 << 0); - } -#endif /* TIVA_WDG_USE_WDT0 */ - -#if TIVA_WDG_USE_WDT1 - if (&WDGD2 == wdgp) { - SYSCTL->SRWD |= (1 << 1); - SYSCTL->SRWD &= ~(1 << 1); - } -#endif /* TIVA_WDG_USE_WDT1 */ -} - -/** - * @brief Reloads WDG's counter. - * - * @param[in] wdgp pointer to the @p WDGDriver object - * - * @notapi - */ -void wdg_lld_reset(WDGDriver *wdgp) -{ -#if defined(TM4C123_USE_REVISION_6_FIX) || defined(TM4C123_USE_REVISION_7_FIX) - -#if TIVA_WDG_USE_WDT1 - if (&WDGD2 == wdgp) { - /* Number: WDT#02 - * Description: Periodically reloading the count value into the Watchdog - * Timer Load (WDTLOAD) register of the Watchdog Timer 1 - * module will not restart the count, as specified in the data - * sheet. - * Workaround: Disable the Watchdog Timer 1 module by setting the - * appropriate bit in the Watchdog Timer Software Reset (SRWD) - * register before reprogramming the counter.*/ - wdg_lld_stop(wdgp); - wdg_lld_start(wdgp); - return; - } -#endif /* TIVA_WDG_USE_WDT1 */ - -#endif /* defined(TM4C123_USE_REVISION_6_FIX) || - defined(TM4C123_USE_REVISION_7_FIX) */ - wdgp->wdt->LOAD = wdgp->config->load; - wdgTivaSyncWrite(wdgp); -} - -#endif /* HAL_USE_WDG */ - -#if TIVA_WDG_USE_WDT1 -/** - * @brief synchronize after a write to a watchdog register. - * - * @param[in] wdgp pointer to the @p WDGDriver object. - */ -void wdgTivaSyncWrite(WDGDriver *wdgp) -{ - if (&WDGD2 == wdgp) { - while (!(wdgp->wdt->CTL & CTL_WRC)) { - ; - } - } -} -#endif /* TIVA_WDG_USE_WDT1 */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.h deleted file mode 100644 index f88fa26..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/hal_wdg_lld.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - - -/** - * @file TIVA/wdg_lld.h - * @brief WDG Driver subsystem low level driver header. - * - * @addtogroup WDG - * @{ - */ - -#ifndef _WDG_LLD_H_ -#define _WDG_LLD_H_ - -#if HAL_USE_WDG || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define LOCK_UNLOCK 0x1ACCE551U -#define LOCK_LOCK 0x00000000U - -#define LOCK_IS_UNLOCKED 0U -#define LOCK_IS_LOCKED 1U - -#define TEST_STALL (1 << 8) - -#define MIS_WDTMIS (1 << 0) -#define RIS_WDTRIS (1 << 0) -#define ICR_WDTICR (1 << 0) - -#define CTL_INTEN (1 << 0) -#define CTL_RESEN (1 << 1) -#define CTL_INTTYPE (1 << 2) -#define CTL_WRC (1 << 31) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief WDT driver enable switch. - * @details If set to @p TRUE the support for WDT is included. - * @note The default is @p FALSE. - */ -#if !defined(TIVA_WDG_USE_WDT) || defined(__DOXYGEN__) -#define TIVA_WDG_USE_WDT FALSE -#endif - -/** - * @brief WDT interrupt priority level setting. - */ -#if !defined(TIVA_WDG_WDT_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_WDG_WDT_IRQ_PRIORITY 5 -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if TIVA_WDG_USE_WDT0 && !TIVA_HAS_WDT0 -#error "WDT0 not present in the selected device" -#endif - -#if TIVA_WDG_USE_WDT1 && !TIVA_HAS_WDT1 -#error "WDT1 not present in the selected device" -#endif - -#if !TIVA_WDG_USE_WDT0 && !TIVA_WDG_USE_WDT1 -#error "WDG driver activated but no WDT peripheral assigned" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an WDG driver. - */ -typedef struct WDGDriver WDGDriver; - -/** - * @brief WDG timeout callback type. - * - * @param[in] wdgp pointer to the @p WDGDriver object triggering the callback. - */ -typedef bool (*wdgcallback_t)(WDGDriver *wdgp); - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct -{ - /** - * @brief Interval value used by the WDT. - */ - uint32_t load; - /** - * @brief Timeout callback pointer. - * @note This callback is invoked on the first WDT timeout. If set to - * @p NULL then the callback is disabled. - */ - wdgcallback_t callback; - /** - * @brief Test register configuration value. - */ - uint16_t test; -} WDGConfig; - -/** - * @brief Structure representing an WDG driver. - */ -struct WDGDriver -{ - /** - * @brief Driver state. - */ - wdgstate_t state; - /** - * @brief Current configuration data. - */ - const WDGConfig *config; - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the WDT registers block. - */ - WDT_TypeDef *wdt; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -#if !TIVA_WDG_USE_WDT1 -#define wdgTivaSyncWrite(wdt) -#endif - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if TIVA_WDG_USE_WDT0 && !defined(__DOXYGEN__) -extern WDGDriver WDGD1; -#endif - -#if TIVA_WDG_USE_WDT1 && !defined(__DOXYGEN__) -extern WDGDriver WDGD2; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void wdg_lld_init(void); - void wdg_lld_start(WDGDriver *wdgp); - void wdg_lld_stop(WDGDriver *wdgp); - void wdg_lld_reset(WDGDriver *wdgp); -#if TIVA_WDG_USE_WDT1 - void wdgTivaSyncWrite(WDGDriver *wdgp); -#endif -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_WDG */ - -#endif /* _WDG_LLD_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_gpt.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_gpt.h deleted file mode 100644 index 114831b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_gpt.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file tiva_gpt.h - * @brief TIVA GPT registers layout header. - * - * @addtogroup TIVA_GPT - * @{ - */ - -#ifndef TIVA_GPT_H_ -#define TIVA_GPT_H_ - -// cfg -#define GPTM_CFG_CFG_MASK (7 << 0) -#define GPTM_CFG_CFG_WHOLE (0 << 0) -#define GPTM_CFG_CFG_RTC (1 << 0) -#define GPTM_CFG_CFG_SPLIT (4 << 0) - -// tamr -#define GPTM_TAMR_TAMR_MASK (3 << 0) -#define GPTM_TAMR_TAMR_ONESHOT (1 << 0) -#define GPTM_TAMR_TAMR_PERIODIC (2 << 0) -#define GPTM_TAMR_TAMR_CAPTURE (3 << 0) - -#define GPTM_TAMR_TACMR (1 << 2) - -#define GPTM_TAMR_TAAMS (1 << 3) - -#define GPTM_TAMR_TACDIR (1 << 4) - -#define GPTM_TAMR_TAMIE (1 << 5) - -#define GPTM_TAMR_TAWOT (1 << 6) - -#define GPTM_TAMR_TASNAPS (1 << 7) - -#define GPTM_TAMR_TAILD (1 << 8) - -#define GPTM_TAMR_TAPWMIE (1 << 9) - -#define GPTM_TAMR_TAMRSU (1 << 10) - -#define GPTM_TAMR_TAPLO (1 << 11) - -// ctl -#define GPTM_CTL_TAEN (1 << 0) - -#define GPTM_CTL_TASTALL (1 << 1) - -#define GPTM_CTL_TAEVENT_MASK (3 << 2) -#define GPTM_CTL_TAEVENT_POS (0 << 2) -#define GPTM_CTL_TAEVENT_NEG (1 << 2) -#define GPTM_CTL_TAEVENT_BOTH (3 << 2) - -#define GPTM_CTL_RTCEN (1 << 4) - -#define GPTM_CTL_TAOTE (1 << 5) - -#define GPTM_CTL_TAPWML (1 << 6) - -#define GPTM_CTL_TBEN (1 << 8) - -#define GPTM_CTL_TBSTALL (1 << 9) - -#define GPTM_CTL_TBEVENT_MASK (3 << 10) -#define GPTM_CTL_TBEVENT_POS (0 << 10) -#define GPTM_CTL_TBEVENT_NEG (1 << 10) -#define GPTM_CTL_TBEVENT_BOTH (3 << 10) - -#define GPTM_CTL_TBOTE (1 << 13) - -#define GPTM_CTL_TBPWML (1 << 14) - -// imr -#define GPTM_IMR_TATOIM (1 << 0) - -#define GPTM_IMR_CAMIM (1 << 1) - -#define GPTM_IMR_CAEIM (1 << 2) - -#define GPTM_IMR_RTCIM (1 << 3) - -#define GPTM_IMR_TAMIM (1 << 4) - -#define GPTM_IMR_TBTOIM (1 << 8) - -#define GPTM_IMR_CBMIM (1 << 9) - -#define GPTM_IMR_CBEIM (1 << 10) - -#define GPTM_IMR_TBMIM (1 << 11) - -#define GPTM_IMR_WUEIM (1 << 16) - -// icr -#define GPTM_ICR_TATOCINT (1 << 0) - -#define GPTM_ICR_CAMCINT (1 << 1) - -#define GPTM_ICR_CAECINT (1 << 2) - -#define GPTM_ICR_RTCCINT (1 << 3) - -#define GPTM_ICR_TAMCINT (1 << 4) - -#define GPTM_ICR_TBTOCINT (1 << 8) - -#define GPTM_ICR_CBMCINT (1 << 9) - -#define GPTM_ICR_CBECINT (1 << 10) - -#define GPTM_ICR_TBMCINT (1 << 11) - -#define GPTM_ICR_WUECINT (1 << 16) - -#endif /* TIVA_GPT_H_ */ - -/* - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.c deleted file mode 100644 index 9f122b2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* The following macro is only defined if some driver requiring DMA services - has been enabled.*/ -#if defined(TIVA_UDMA_REQUIRED) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -udmaControlTable_t udmaControlTable; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -static uint32_t udma_channel_mask; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if !defined(TIVA_UDMA_SW_HANDLER) -#error "TIVA_UDMA_SW_HANDLER not defined" -#endif -/** - * @brief UDMA software interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_UDMA_SW_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - /* TODO Process software transfer interrupts.*/ - - OSAL_IRQ_EPILOGUE(); -} - -#if !defined(TIVA_UDMA_ERR_HANDLER) -#error "TIVA_UDMA_ERR_HANDLER not defined" -#endif -/** - * @brief UDMA error interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_UDMA_ERR_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - /* TODO Do we need to halt the system on a DMA error?*/ - - if (UDMA->ERRCLR) { - UDMA->ERRCLR = 1; - } - - OSAL_IRQ_EPILOGUE(); -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Initialize UDMA. - * - * @init - */ -void udmaInit(void) -{ - udma_channel_mask = 0; - - /* Enable UDMA module.*/ - SYSCTL->RCGCDMA = 1; - while (!(SYSCTL->PRDMA & (1 << 0))) - ; - - nvicEnableVector(TIVA_UDMA_ERR_NUMBER, TIVA_UDMA_ERR_IRQ_PRIORITY); - nvicEnableVector(TIVA_UDMA_SW_NUMBER, TIVA_UDMA_SW_IRQ_PRIORITY); - - /* Enable UDMA controller.*/ - UDMA->CFG = 1; - - /* Set address of control table.*/ - UDMA->CTLBASE = (uint32_t)udmaControlTable.primary; -} - -/** - * @brief Allocates a DMA channel. - * - * @special - */ -bool udmaChannelAllocate(uint8_t dmach) -{ - /* Checks if the channel is already taken.*/ - if ((udma_channel_mask & (1 << dmach)) != 0) - return TRUE; - - /* Mark channel as used */ - udma_channel_mask |= (1 << dmach); - - return FALSE; -} - -/** - * @brief Releases a DMA channel. - * - * @special - */ -void udmaChannelRelease(uint8_t dmach) -{ - /* Marks the channel as not used.*/ - udma_channel_mask &= ~(1 << dmach); -} - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.h deleted file mode 100644 index 6479b08..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/LLD/tiva_udma.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef TIVA_UDMA_H_ -#define TIVA_UDMA_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name CHCTL register defines. - * @{ - */ -#define UDMA_CHCTL_DSTINC_MASK 0xC0000000 -#define UDMA_CHCTL_DSTINC_0 0xC0000000 -#define UDMA_CHCTL_DSTINC_8 0x00000000 -#define UDMA_CHCTL_DSTINC_16 0x40000000 -#define UDMA_CHCTL_DSTINC_32 0x80000000 -#define UDMA_CHCTL_DSTSIZE_MASK 0x30000000 -#define UDMA_CHCTL_DSTSIZE_8 0x00000000 -#define UDMA_CHCTL_DSTSIZE_16 0x10000000 -#define UDMA_CHCTL_DSTSIZE_32 0x20000000 -#define UDMA_CHCTL_SRCINC_MASK 0x0C000000 -#define UDMA_CHCTL_SRCINC_0 0x0C000000 -#define UDMA_CHCTL_SRCINC_8 0x00000000 -#define UDMA_CHCTL_SRCINC_16 0x04000000 -#define UDMA_CHCTL_SRCINC_32 0x08000000 -#define UDMA_CHCTL_SRCSIZE_MASK 0x03000000 -#define UDMA_CHCTL_SRCSIZE_8 0x00000000 -#define UDMA_CHCTL_SRCSIZE_16 0x01000000 -#define UDMA_CHCTL_SRCSIZE_32 0x02000000 -#define UDMA_CHCTL_ARBSIZE_MASK 0x0003C000 -#define UDMA_CHCTL_ARBSIZE_1 0x00000000 -#define UDMA_CHCTL_ARBSIZE_2 0x00004000 -#define UDMA_CHCTL_ARBSIZE_4 0x00008000 -#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 -#define UDMA_CHCTL_ARBSIZE_16 0x00010000 -#define UDMA_CHCTL_ARBSIZE_32 0x00014000 -#define UDMA_CHCTL_ARBSIZE_64 0x00018000 -#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 -#define UDMA_CHCTL_ARBSIZE_256 0x00020000 -#define UDMA_CHCTL_ARBSIZE_512 0x00024000 -#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 -#define UDMA_CHCTL_XFERSIZE_MASK 0x00003FF0 -#define UDMA_CHCTL_XFERSIZE(n) ((n-1) << 4) -#define UDMA_CHCTL_NXTUSEBURST 0x00000008 -#define UDMA_CHCTL_XFERMODE_MASK 0x00000007 -#define UDMA_CHCTL_XFERMODE_STOP 0x00000000 -#define UDMA_CHCTL_XFERMODE_BASIC 0x00000001 -#define UDMA_CHCTL_XFERMODE_AUTO 0x00000002 -#define UDMA_CHCTL_XFERMODE_PINGPONG 0x00000003 -#define UDMA_CHCTL_XFERMODE_MSG 0x00000004 -#define UDMA_CHCTL_XFERMODE_AMSG 0x00000005 -#define UDMA_CHCTL_XFERMODE_PSG 0x00000006 -#define UDMA_CHCTL_XFERMODE_APSG 0x00000007 -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief UDMA software interrupt priority level setting. - */ -#if !defined(TIVA_UDMA_SW_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_UDMA_SW_IRQ_PRIORITY 5 -#endif - -/** - * @brief UDMA error interrupt priority level setting. - */ -#if !defined(TIVA_UDMA_ERR_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_UDMA_ERR_IRQ_PRIORITY 5 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief A structure that defines an entry in the channel control table. - * @note These fields are used by the uDMA controller and normally it is not - * necessary for software to directly read or write fields in the - * table. - */ -typedef struct __attribute__((packed)) -{ - /** - * @brief The ending source address of the data transfer. - */ - volatile void *srcendp; - /** - * @brief The ending destination address of the data transfer. - */ - volatile void *dstendp; - /** - * @brief The channel control mode. - */ - volatile uint32_t chctl; - /** - * @brief An unused location. - */ - volatile uint32_t unused; -} tiva_udma_table_entry_t; - -typedef struct __attribute__((packed, aligned(1024))) -{ - union { - struct { - tiva_udma_table_entry_t primary[32]; - tiva_udma_table_entry_t alternate[32]; - }; - uint8_t raw[1024]; - }; -} udmaControlTable_t ; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -#define dmaChannelEnable(dmach) {\ - UDMA->ENASET = (1 << dmach);\ -} - -#define dmaChannelDisable(dmach) { \ - UDMA->ENACLR = (1 << dmach); \ -} - -#define dmaChannelPrimary(dmach) {\ - UDMA->ALTCLR = (1 << dmach); \ -} - -#define dmaChannelAlternate(dmach) { \ - UDMA->ALTSET = (1 << dmach); \ -} - -#define dmaChannelSingleBurst(dmach) { \ - UDMA->USEBURSTCLR = (1 << dmach); \ -} - -#define dmaChannelBurstOnly(dmach) { \ - UDMA->USEBURSTSET = (1 << dmach); \ -} - -#define dmaChannelPriorityHigh(dmach) { \ - UDMA->PRIOSET = (1 << dmach); \ -} - -#define dmaChannelPriorityDefault(dmach) { \ - UDMA->PRIOCLR = (1 << dmach); \ -} - -#define dmaChannelEnableRequest(dmach) {\ - UDMA->REQMASKCLR = (1 << dmach); \ -} - -#define dmaChannelDisableRequest(dmach) {\ - UDMA->REQMASKSET = (1 << dmach); \ -} - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern udmaControlTable_t udmaControlTable; - -#ifdef __cplusplus -extern "C" { -#endif - void udmaInit(void); - bool udmaChannelAllocate(uint8_t dmach); - void udmaChannelRelease(uint8_t dmach); -#ifdef __cplusplus -} -#endif - -#endif /* TIVA_UDMA_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c deleted file mode 100644 index ddcddb3..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/TM4C123x/hal_lld.c - * @brief TM4C123x HAL Driver subsystem low level driver source. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * - * @notapi - */ -void hal_lld_init(void) -{ -} - -/** - * @brief TM4C123x clocks and PLL initialization. - * @note All the involved constants come from the file @p board.h and - * @p mcuconf.h. - * @note This function should be invoked just after the system reset. - * - * @special - */ -void tiva_clock_init(void) -{ - uint32_t rcc, rcc2, i; - - /* 1. Bypass the PLL and system clock divider by setting the BYPASS bit and - * clearing the USESYSDIV bit in the RCC register, thereby configuring the - * microcontroller to run off a "raw" clock source and allowing for the new - * PLL configuration to be validated before switching the system clock to the - * PLL. */ - /* read */ - - rcc = SYSCTL->RCC; - rcc2 = SYSCTL->RCC2; - - /* modify */ - rcc |= TIVA_RCC_BYPASS; - rcc &= ~TIVA_RCC_USESYSDIV; - rcc2 |= TIVA_RCC2_BYPASS2 | TIVA_RCC2_USERCC2; - - /* write */ - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; - - /* 2 Select the crystal value (XTAL) and oscillator source (OSCSRC), and - * clear the PWRDN bit in RCC and RCC2. Setting the XTAL field automatically - * pulls valid PLL configuration data for the appropriate crystal, and - * clearing the PWRDN bit powers and enables the PLL and its output. */ - /* modify */ - rcc &= ~(TIVA_RCC_OSCSRC_MASK | TIVA_RCC_XTAL_MASK | TIVA_RCC_PWRDN | TIVA_RCC_MOSCDIS); - rcc |= ((TIVA_XTAL | TIVA_OSCSRC | TIVA_MOSCDIS) & (TIVA_RCC_XTAL_MASK | TIVA_RCC_OSCSRC_MASK | TIVA_RCC_MOSCDIS)); - rcc2 &= ~(TIVA_RCC2_OSCSRC2_MASK | TIVA_RCC2_PWRDN2); - rcc2 |= ((TIVA_OSCSRC | TIVA_DIV400) & (TIVA_RCC2_OSCSRC2_MASK | TIVA_RCC2_DIV400)); - - /* write */ - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; - for(i = 100000; i; i--); - - /* 3. Select the desired system divider (SYSDIV) in RCC and RCC2 and set the - * USESYSDIV bit in RCC. The SYSDIV field determines the system frequency for - * the microcontroller. */ - /* modify */ - rcc &= ~TIVA_RCC_SYSDIV_MASK; - rcc |= (TIVA_SYSDIV & TIVA_RCC_SYSDIV_MASK) | TIVA_USESYSDIV; - rcc2 &= ~(TIVA_RCC2_SYSDIV2_MASK | TIVA_RCC2_SYSDIV2LSB); - rcc2 |= ((TIVA_SYSDIV2 | TIVA_SYSDIV2LSB) & (TIVA_RCC2_SYSDIV2_MASK | TIVA_RCC2_SYSDIV2LSB)); - - /* write */ - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; - - /* 4. Wait for the PLL to lock by polling the PLLLRIS bit in the Raw - * Interrupt Status (RIS) register. */ - while ((SYSCTL->RIS & SYSCTL_RIS_PLLLRIS) == 0); - - /* 5. Enable use of the PLL by clearing the BYPASS bit in RCC and RCC2. */ - rcc &= ~TIVA_RCC_BYPASS; - rcc2 &= ~TIVA_RCC2_BYPASS2; - rcc |= (TIVA_BYPASS_VALUE << 11); - rcc2 |= (TIVA_BYPASS_VALUE << 11); - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; - -#if HAL_USE_PWM - SYSCTL->RCC |= TIVA_PWM_FIELDS; -#endif - -#if defined(TIVA_UDMA_REQUIRED) - udmaInit(); -#endif -} - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h deleted file mode 100644 index ec81806..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/TM4C123x/hal_lld.h - * @brief TM4C123x HAL subsystem low level driver header. - * @pre This module requires the following macros to be defined in the - * @p board.h file: - * - TODO: add required macros - * - * @addtogroup HAL - * @{ - */ - -#ifndef HAL_LLD_H -#define HAL_LLD_H - -#include "tiva_registry.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name Platform identification - * @{ - */ - -#define PLATFORM_NAME "Tiva C Series TM4C123x" - -/** - * @} - */ - -/** - * @name RCC register bits definitions - * @{ - */ - -#define TIVA_RCC_MOSCDIS (0x01 << 0) - -#define TIVA_RCC_OSCSRC_MASK (0x03 << 4) -#define TIVA_RCC_OSCSRC_MOSC (0x00 << 4) -#define TIVA_RCC_OSCSRC_PIOSC (0x01 << 4) -#define TIVA_RCC_OSCSRC_PIOSC_4 (0x02 << 4) -#define TIVA_RCC_OSCSRC_LFIOSC (0x03 << 4) - -#define TIVA_RCC_XTAL_MASK (0x1f << 6) -#define TIVA_RCC_XTAL_4000000 (0x06 << 6) -#define TIVA_RCC_XTAL_4096000 (0x07 << 6) -#define TIVA_RCC_XTAL_4915200 (0x08 << 6) -#define TIVA_RCC_XTAL_5000000 (0x09 << 6) -#define TIVA_RCC_XTAL_5120000 (0x0a << 6) -#define TIVA_RCC_XTAL_6000000 (0x0b << 6) -#define TIVA_RCC_XTAL_6144000 (0x0c << 6) -#define TIVA_RCC_XTAL_7372800 (0x0d << 6) -#define TIVA_RCC_XTAL_8000000 (0x0e << 6) -#define TIVA_RCC_XTAL_8192000 (0x0f << 6) -#define TIVA_RCC_XTAL_10000000 (0x10 << 6) -#define TIVA_RCC_XTAL_12000000 (0x11 << 6) -#define TIVA_RCC_XTAL_12288000 (0x12 << 6) -#define TIVA_RCC_XTAL_13560000 (0x13 << 6) -#define TIVA_RCC_XTAL_14318180 (0x14 << 6) -#define TIVA_RCC_XTAL_16000000 (0x15 << 6) -#define TIVA_RCC_XTAL_16384000 (0x16 << 6) -#define TIVA_RCC_XTAL_18000000 (0x17 << 6) -#define TIVA_RCC_XTAL_20000000 (0x18 << 6) -#define TIVA_RCC_XTAL_24000000 (0x19 << 6) -#define TIVA_RCC_XTAL_25000000 (0x1a << 6) - -#define TIVA_RCC_BYPASS (1 << 11) - -#define TIVA_RCC_PWRDN (1 << 13) - -#define TIVA_RCC_PWMDIV_MASK (0x07 << 17) -#define TIVA_RCC_PWMDIV_2 (0x00 << 17) -#define TIVA_RCC_PWMDIV_4 (0x01 << 17) -#define TIVA_RCC_PWMDIV_8 (0x02 << 17) -#define TIVA_RCC_PWMDIV_16 (0x03 << 17) -#define TIVA_RCC_PWMDIV_32 (0x04 << 17) -#define TIVA_RCC_PWMDIV_64 (0x07 << 17) - -#define TIVA_RCC_USEPWMDIV (1 << 20) - -#define TIVA_RCC_USESYSDIV (1 << 22) - -#define TIVA_RCC_SYSDIV_MASK (0x0f << 23) -#define TIVA_RCC_SYSDIV_1 (0x00 << 23) -#define TIVA_RCC_SYSDIV_2 (0x01 << 23) -#define TIVA_RCC_SYSDIV_3 (0x02 << 23) -#define TIVA_RCC_SYSDIV_4 (0x03 << 23) -#define TIVA_RCC_SYSDIV_5 (0x04 << 23) -#define TIVA_RCC_SYSDIV_6 (0x05 << 23) -#define TIVA_RCC_SYSDIV_7 (0x06 << 23) -#define TIVA_RCC_SYSDIV_8 (0x07 << 23) -#define TIVA_RCC_SYSDIV_9 (0x08 << 23) -#define TIVA_RCC_SYSDIV_10 (0x09 << 23) -#define TIVA_RCC_SYSDIV_11 (0x0a << 23) -#define TIVA_RCC_SYSDIV_12 (0x0b << 23) -#define TIVA_RCC_SYSDIV_13 (0x0c << 23) -#define TIVA_RCC_SYSDIV_14 (0x0d << 23) -#define TIVA_RCC_SYSDIV_15 (0x0e << 23) -#define TIVA_RCC_SYSDIV_16 (0x0f << 23) - -#define TIVA_RCC_ACG (1 << 27) - -/** - * @} - */ - -/** - * @name RCC2 register bits definitions - * @{ - */ - -#define TIVA_RCC2_OSCSRC2_MASK (0x07 << 4) -#define TIVA_RCC2_OSCSRC2_MOSC (0x00 << 4) -#define TIVA_RCC2_OSCSRC2_PIOSC (0x01 << 4) -#define TIVA_RCC2_OSCSRC2_PIOSC_4 (0x02 << 4) -#define TIVA_RCC2_OSCSRC2_LFIOSC (0x03 << 4) -#define TIVA_RCC2_OSCSRC2_32768 (0x07 << 4) - -#define TIVA_RCC2_BYPASS2 (1 << 11) - -#define TIVA_RCC2_PWRDN2 (1 << 13) - -#define TIVA_RCC2_USBPWRDN (1 << 14) - -#define TIVA_RCC2_SYSDIV2LSB (1 << 22) - -#define TIVA_RCC2_SYSDIV2_MASK (0x3f << 23) - -#define TIVA_RCC2_DIV400 (1 << 30) - -#define TIVA_RCC2_USERCC2 (1 << 31) - -/** - * @} - */ - -/** - * @name RIS register bits definitions - * @{ - */ - -#define SYSCTL_RIS_PLLLRIS (1 << 6) - -/** - * @} - */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ - -#if !defined(TIVA_OSCSRC) -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#endif - -#if !defined(TIVA_MOSC_ENABLE) -#define TIVA_MOSC_ENABLE TRUE -#endif - -#if !defined(TIVA_DIV400_VALUE) -#define TIVA_DIV400_VALUE 1 -#endif - -#if !defined(TIVA_SYSDIV_VALUE) -#define TIVA_SYSDIV_VALUE 2 -#endif - -#if !defined(TIVA_USESYSDIV_ENABLE) -#define TIVA_USESYSDIV_ENABLE FALSE -#endif - -#if !defined(TIVA_SYSDIV2LSB_ENABLE) -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#endif - -#if !defined(TIVA_BYPASS_VALUE) -#define TIVA_BYPASS_VALUE 0 -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/* - * Configuration-related checks. - */ -#if !defined(TM4C123x_MCUCONF) -#error "Using a wrong mcuconf.h file, TM4C123x_MCUCONF not defined" -#endif - -/* - * Oscillator-related checks. - */ -#if !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_MOSC) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_PIOSC) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_PIOSC_4) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_LFIOSC) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_32768) -#error "Invalid value for TIVA_OSCSRC defined" -#endif - -#if TIVA_XTAL_VALUE == 4000000 -#define TIVA_XTAL_ (0x06 << 6) -#elif TIVA_XTAL_VALUE == 4096000 -#define TIVA_XTAL_ (0x07 << 6) -#elif TIVA_XTAL_VALUE == 4915200 -#define TIVA_XTAL_ (0x08 << 6) -#elif TIVA_XTAL_VALUE == 5000000 -#define TIVA_XTAL_ (0x09 << 6) -#elif TIVA_XTAL_VALUE == 5120000 -#define TIVA_XTAL_ (0x0a << 6) -#elif TIVA_XTAL_VALUE == 6000000 -#define TIVA_XTAL_ (0x0b << 6) -#elif TIVA_XTAL_VALUE == 6144000 -#define TIVA_XTAL_ (0x0c << 6) -#elif TIVA_XTAL_VALUE == 7372800 -#define TIVA_XTAL_ (0x0d << 6) -#elif TIVA_XTAL_VALUE == 8000000 -#define TIVA_XTAL_ (0x0e << 6) -#elif TIVA_XTAL_VALUE == 8192000 -#define TIVA_XTAL_ (0x0f << 6) -#elif TIVA_XTAL_VALUE == 10000000 -#define TIVA_XTAL_ (0x10 << 6) -#elif TIVA_XTAL_VALUE == 12000000 -#define TIVA_XTAL_ (0x11 << 6) -#elif TIVA_XTAL_VALUE == 12288000 -#define TIVA_XTAL_ (0x12 << 6) -#elif TIVA_XTAL_VALUE == 13560000 -#define TIVA_XTAL_ (0x13 << 6) -#elif TIVA_XTAL_VALUE == 14318180 -#define TIVA_XTAL_ (0x14 << 6) -#elif TIVA_XTAL_VALUE == 16000000 -#define TIVA_XTAL_ (0x15 << 6) -#elif TIVA_XTAL_VALUE == 16384000 -#define TIVA_XTAL_ (0x16 << 6) -#elif TIVA_XTAL_VALUE == 18000000 -#define TIVA_XTAL_ (0x17 << 6) -#elif TIVA_XTAL_VALUE == 20000000 -#define TIVA_XTAL_ (0x18 << 6) -#elif TIVA_XTAL_VALUE == 24000000 -#define TIVA_XTAL_ (0x19 << 6) -#elif TIVA_XTAL_VALUE == 25000000 -#define TIVA_XTAL_ (0x1a << 6) -#else -#error "Invalid value for TIVA_XTAL_VALUE defined" -#endif - -#if TIVA_MOSC_ENABLE == TRUE -#define TIVA_MOSCDIS (0 << 0) -#define TIVA_XTAL TIVA_XTAL_ -#elif TIVA_MOSC_ENABLE == FALSE -#define TIVA_MOSCDIS (1 << 0) -#define TIVA_XTAL 0 -#else -#error "Invalid value for TIVA_MOSC_ENABLE defined" -#endif - -#if TIVA_DIV400_VALUE == 1 -#define TIVA_DIV400 (1 << 30) -#elif TIVA_DIV400_VALUE == 0 -#define TIVA_DIV400 (0 << 30) -#else -#error "Invalid value for TIVA_DIV400_VALUE defined" -#endif - -#if (TIVA_SYSDIV_VALUE >= 0x02) && (TIVA_SYSDIV_VALUE <= 0x3f) -#define TIVA_SYSDIV (TIVA_SYSDIV_VALUE << 23) -#define TIVA_SYSDIV2 (TIVA_SYSDIV_VALUE << 23) -#else -#error "Invalid value for TIVA_SYSDIV_VALUE defined" -#endif - -#if TIVA_USESYSDIV_ENABLE == TRUE -#define TIVA_USESYSDIV (1 << 22) -#elif TIVA_USESYSDIV_ENABLE == FALSE -#define TIVA_USESYSDIV (0 << 22) -#else -#error "Invalid value for TIVA_USESYSDIV_ENABLE defined" -#endif - -#if TIVA_SYSDIV2LSB_ENABLE == TRUE -#define TIVA_SYSDIV2LSB (1 << 22) -#elif TIVA_SYSDIV2LSB_ENABLE == FALSE -#define TIVA_SYSDIV2LSB (0 << 22) -#else -#error "Invalid value for TIVA_SYSDIV2LSB_ENABLE defined" -#endif - -#if TIVA_BYPASS_VALUE == 1 -#define TIVA_SRC 16000000 -#elif TIVA_BYPASS_VALUE == 0 -#define TIVA_SRC (200000000 + (TIVA_DIV400_VALUE * 200000000)) -#else -#error "Invalid value for TIVA_BYPASS_VALUE defined" -#endif - -#if (TIVA_OSCSRC == TIVA_RCC_OSCSRC_MOSC) && (TIVA_MOSC_ENABLE == FALSE) -#error "Main Oscillator selected but not enabled" -#endif - -/* - * System Clock calculation - */ -#define TIVA_SYSCLK (TIVA_SRC / (((TIVA_SYSDIV_VALUE << TIVA_DIV400_VALUE /*& TIVA_BYPASS_VALUE*/) | (TIVA_SYSDIV2LSB >> 22)) + 1)) - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/* Various helpers.*/ -#include "nvic.h" -#include "tiva_isr.h" -#include "tiva_udma.h" - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); - void tiva_clock_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_LLD_H */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/platform.mk deleted file mode 100644 index 0abafcc..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/platform.mk +++ /dev/null @@ -1,18 +0,0 @@ -# List of all the TM4C123x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C123x/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_pwm_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_spi_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/tiva_udma.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_wdg_lld.c - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C123x \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h deleted file mode 100644 index b380e46..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h +++ /dev/null @@ -1,650 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TM4C123x/tiva_isr.h - * @brief TM4C123x ISR remapper driver header. - * - * @addtogroup TM4C123x_ISR - * @{ - */ - -#ifndef _TIVA_ISR_H_ -#define _TIVA_ISR_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name ISR names and numbers remapping - * @{ - */ - -/* UDMA units.*/ -#define TIVA_UDMA_SW_HANDLER VectorF8 -#define TIVA_UDMA_ERR_HANDLER VectorFC - -#define TIVA_UDMA_SW_NUMBER 46 -#define TIVA_UDMA_ERR_NUMBER 47 - -/* GPIO units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) \ - || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) || defined(TM4C1236D5PM) \ - || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 -#define TIVA_GPIOG_HANDLER VectorBC - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#define TIVA_GPIOG_NUMBER 31 -#endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PZ) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PZ) \ - || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PZ) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PZ) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 -#define TIVA_GPIOG_HANDLER VectorBC -#define TIVA_GPIOH_HANDLER VectorC0 -#define TIVA_GPIOJ_HANDLER Vector118 -#define TIVA_GPIOK_HANDLER Vector11C -#define TIVA_GPIOL_HANDLER Vector120 - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#define TIVA_GPIOG_NUMBER 31 -#define TIVA_GPIOH_NUMBER 32 -#define TIVA_GPIOJ_NUMBER 54 -#define TIVA_GPIOK_NUMBER 55 -#define TIVA_GPIOL_NUMBER 56 -#endif -#if defined(TM4C1231H6PGE) || defined(TM4C1233H6PGE) || defined(TM4C1237H6PGE)\ - || defined(TM4C123BH6PGE) || defined(TM4C123GH6PGE) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 -#define TIVA_GPIOG_HANDLER VectorBC -#define TIVA_GPIOH_HANDLER VectorC0 -#define TIVA_GPIOJ_HANDLER Vector118 -#define TIVA_GPIOK_HANDLER Vector11C -#define TIVA_GPIOL_HANDLER Vector120 -#define TIVA_GPIOM_HANDLER Vector1FC -#define TIVA_GPION_HANDLER Vector200 -#define TIVA_GPIOP0_HANDLER Vector210 -#define TIVA_GPIOP1_HANDLER Vector214 -#define TIVA_GPIOP2_HANDLER Vector218 -#define TIVA_GPIOP3_HANDLER Vector21C -#define TIVA_GPIOP4_HANDLER Vector220 -#define TIVA_GPIOP5_HANDLER Vector224 -#define TIVA_GPIOP6_HANDLER Vector228 -#define TIVA_GPIOP7_HANDLER Vector22C - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#define TIVA_GPIOG_NUMBER 31 -#define TIVA_GPIOH_NUMBER 32 -#define TIVA_GPIOJ_NUMBER 54 -#define TIVA_GPIOK_NUMBER 55 -#define TIVA_GPIOL_NUMBER 56 -#define TIVA_GPIOM_NUMBER 111 -#define TIVA_GPION_NUMBER 112 -#define TIVA_GPIOP0_NUMBER 116 -#define TIVA_GPIOP1_NUMBER 117 -#define TIVA_GPIOP2_NUMBER 118 -#define TIVA_GPIOP3_NUMBER 119 -#define TIVA_GPIOP4_NUMBER 120 -#define TIVA_GPIOP5_NUMBER 121 -#define TIVA_GPIOP6_NUMBER 122 -#define TIVA_GPIOP7_NUMBER 123 -#endif -#if defined(TM4C123BH6ZRB) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 -#define TIVA_GPIOG_HANDLER VectorBC -#define TIVA_GPIOH_HANDLER VectorC0 -#define TIVA_GPIOJ_HANDLER Vector118 -#define TIVA_GPIOK_HANDLER Vector11C -#define TIVA_GPIOL_HANDLER Vector120 -#define TIVA_GPIOM_HANDLER Vector1FC -#define TIVA_GPION_HANDLER Vector200 -#define TIVA_GPIOP0_HANDLER Vector210 -#define TIVA_GPIOP1_HANDLER Vector214 -#define TIVA_GPIOP2_HANDLER Vector218 -#define TIVA_GPIOP3_HANDLER Vector21C -#define TIVA_GPIOP4_HANDLER Vector220 -#define TIVA_GPIOP5_HANDLER Vector224 -#define TIVA_GPIOP6_HANDLER Vector228 -#define TIVA_GPIOP7_HANDLER Vector22C -#define TIVA_GPIOQ0_HANDLER Vector230 -#define TIVA_GPIOQ1_HANDLER Vector234 -#define TIVA_GPIOQ2_HANDLER Vector238 -#define TIVA_GPIOQ3_HANDLER Vector23C -#define TIVA_GPIOQ4_HANDLER Vector240 -#define TIVA_GPIOQ5_HANDLER Vector244 -#define TIVA_GPIOQ6_HANDLER Vector248 -#define TIVA_GPIOQ7_HANDLER Vector24C - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#define TIVA_GPIOG_NUMBER 31 -#define TIVA_GPIOH_NUMBER 32 -#define TIVA_GPIOJ_NUMBER 54 -#define TIVA_GPIOK_NUMBER 55 -#define TIVA_GPIOL_NUMBER 56 -#define TIVA_GPIOM_NUMBER 111 -#define TIVA_GPION_NUMBER 112 -#define TIVA_GPIOP0_NUMBER 116 -#define TIVA_GPIOP1_NUMBER 117 -#define TIVA_GPIOP2_NUMBER 118 -#define TIVA_GPIOP3_NUMBER 119 -#define TIVA_GPIOP4_NUMBER 120 -#define TIVA_GPIOP5_NUMBER 121 -#define TIVA_GPIOP6_NUMBER 122 -#define TIVA_GPIOP7_NUMBER 123 -#define TIVA_GPIOQ0_NUMBER 124 -#define TIVA_GPIOQ1_NUMBER 125 -#define TIVA_GPIOQ2_NUMBER 126 -#define TIVA_GPIOQ3_NUMBER 127 -#define TIVA_GPIOQ4_NUMBER 128 -#define TIVA_GPIOQ5_NUMBER 129 -#define TIVA_GPIOQ6_NUMBER 130 -#define TIVA_GPIOQ7_NUMBER 131 -#endif - -/* GPTM units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_GPT0A_HANDLER Vector8C -#define TIVA_GPT0B_HANDLER Vector90 -#define TIVA_GPT1A_HANDLER Vector94 -#define TIVA_GPT1B_HANDLER Vector98 -#define TIVA_GPT2A_HANDLER Vector9C -#define TIVA_GPT2B_HANDLER VectorA0 -#define TIVA_GPT3A_HANDLER VectorCC -#define TIVA_GPT3B_HANDLER VectorD0 -#define TIVA_GPT4A_HANDLER Vector158 -#define TIVA_GPT4B_HANDLER Vector15C -#define TIVA_GPT5A_HANDLER Vector1B0 -#define TIVA_GPT5B_HANDLER Vector1B4 - -#define TIVA_GPT0A_NUMBER 19 -#define TIVA_GPT0B_NUMBER 20 -#define TIVA_GPT1A_NUMBER 21 -#define TIVA_GPT1B_NUMBER 22 -#define TIVA_GPT2A_NUMBER 23 -#define TIVA_GPT2B_NUMBER 24 -#define TIVA_GPT3A_NUMBER 35 -#define TIVA_GPT3B_NUMBER 36 -#define TIVA_GPT4A_NUMBER 70 -#define TIVA_GPT4B_NUMBER 71 -#define TIVA_GPT5A_NUMBER 92 -#define TIVA_GPT5B_NUMBER 93 - -#define TIVA_WGPT0A_HANDLER Vector1B8 -#define TIVA_WGPT0B_HANDLER Vector1BC -#define TIVA_WGPT1A_HANDLER Vector1C0 -#define TIVA_WGPT1B_HANDLER Vector1C4 -#define TIVA_WGPT2A_HANDLER Vector1C8 -#define TIVA_WGPT2B_HANDLER Vector1CC -#define TIVA_WGPT3A_HANDLER Vector1D0 -#define TIVA_WGPT3B_HANDLER Vector1D4 -#define TIVA_WGPT4A_HANDLER Vector1D8 -#define TIVA_WGPT4B_HANDLER Vector1DC -#define TIVA_WGPT5A_HANDLER Vector1E0 -#define TIVA_WGPT5B_HANDLER Vector1E4 - -#define TIVA_WGPT0A_NUMBER 94 -#define TIVA_WGPT0B_NUMBER 95 -#define TIVA_WGPT1A_NUMBER 96 -#define TIVA_WGPT1B_NUMBER 97 -#define TIVA_WGPT2A_NUMBER 98 -#define TIVA_WGPT2B_NUMBER 99 -#define TIVA_WGPT3A_NUMBER 100 -#define TIVA_WGPT3B_NUMBER 101 -#define TIVA_WGPT4A_NUMBER 102 -#define TIVA_WGPT4B_NUMBER 103 -#define TIVA_WGPT5A_NUMBER 104 -#define TIVA_WGPT5B_NUMBER 105 -#endif - -/* WDT units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_WDT_HANDLER Vector88 - -#define TIVA_WDT_NUMBER 18 -#endif - -/* ADC units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_ADC0_SEQ0_HANDLER Vector78 -#define TIVA_ADC0_SEQ1_HANDLER Vector7C -#define TIVA_ADC0_SEQ2_HANDLER Vector80 -#define TIVA_ADC0_SEQ3_HANDLER Vector84 -#define TIVA_ADC1_SEQ0_HANDLER Vector100 -#define TIVA_ADC1_SEQ1_HANDLER Vector104 -#define TIVA_ADC1_SEQ2_HANDLER Vector108 -#define TIVA_ADC1_SEQ3_HANDLER Vector10C - -#define TIVA_ADC0_SEQ0_NUMBER 14 -#define TIVA_ADC0_SEQ1_NUMBER 15 -#define TIVA_ADC0_SEQ2_NUMBER 16 -#define TIVA_ADC0_SEQ3_NUMBER 17 -#define TIVA_ADC1_SEQ0_NUMBER 48 -#define TIVA_ADC1_SEQ1_NUMBER 49 -#define TIVA_ADC1_SEQ2_NUMBER 50 -#define TIVA_ADC1_SEQ3_NUMBER 51 -#endif - -/* UART units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_UART0_HANDLER Vector54 -#define TIVA_UART1_HANDLER Vector58 -#define TIVA_UART2_HANDLER VectorC4 -#define TIVA_UART3_HANDLER Vector12C -#define TIVA_UART4_HANDLER Vector130 -#define TIVA_UART5_HANDLER Vector134 -#define TIVA_UART6_HANDLER Vector138 -#define TIVA_UART7_HANDLER Vector13C - -#define TIVA_UART0_NUMBER 5 -#define TIVA_UART1_NUMBER 6 -#define TIVA_UART2_NUMBER 33 -#define TIVA_UART3_NUMBER 59 -#define TIVA_UART4_NUMBER 60 -#define TIVA_UART5_NUMBER 61 -#define TIVA_UART6_NUMBER 62 -#define TIVA_UART7_NUMBER 63 -#endif - -/* SPI units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_SSI0_HANDLER Vector5C -#define TIVA_SSI1_HANDLER VectorC8 -#define TIVA_SSI2_HANDLER Vector124 -#define TIVA_SSI3_HANDLER Vector128 - -#define TIVA_SSI0_NUMBER 7 -#define TIVA_SSI1_NUMBER 34 -#define TIVA_SSI2_NUMBER 57 -#define TIVA_SSI3_NUMBER 58 -#endif - -/* I2C units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PZ) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PGE) \ - || defined(TM4C1233H6PZ) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) \ - || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_I2C0_HANDLER Vector60 -#define TIVA_I2C1_HANDLER VectorD4 -#define TIVA_I2C2_HANDLER Vector150 -#define TIVA_I2C3_HANDLER Vector154 -#define TIVA_I2C4_HANDLER Vector1F4 -#define TIVA_I2C5_HANDLER Vector1F8 - -#define TIVA_I2C0_NUMBER 8 -#define TIVA_I2C1_NUMBER 37 -#define TIVA_I2C2_NUMBER 68 -#define TIVA_I2C3_NUMBER 69 -#define TIVA_I2C4_NUMBER 109 -#define TIVA_I2C5_NUMBER 110 -#endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) -#define TIVA_I2C0_HANDLER Vector60 -#define TIVA_I2C1_HANDLER VectorD4 -#define TIVA_I2C2_HANDLER Vector150 -#define TIVA_I2C3_HANDLER Vector154 - -#define TIVA_I2C0_NUMBER 8 -#define TIVA_I2C1_NUMBER 37 -#define TIVA_I2C2_NUMBER 68 -#define TIVA_I2C3_NUMBER 69 -#endif - -/* CAN units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) -#define TIVA_CAN0_HANDLER VectorDC - -#define TIVA_CAN0_NUMBER 39 -#endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_CAN0_HANDLER VectorDC -#define TIVA_CAN1_HANDLER VectorE0 - -#define TIVA_CAN0_NUMBER 39 -#define TIVA_CAN1_NUMBER 40 -#endif - -/* USB units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) -/* No interrupt handler and number.*/ -#endif -#if defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) \ - || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) \ - || defined(TM4C123GH5ZXR) -#define TIVA_USB0_HANDLER VectorF0 - -#define TIVA_USB0_NUMBER 44 -#endif - -/* AC units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231E6PM) || defined(TM4C1231H6PM) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) || defined(TM4C1233E6PM) \ - || defined(TM4C1233H6PM) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PM) || defined(TM4C1237E6PM) \ - || defined(TM4C1237H6PM) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BH6PM) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) -#define TIVA_AC0_HANDLER VectorA4 -#define TIVA_AC1_HANDLER VectorA8 - -#define TIVA_AC0_NUMBER 25 -#define TIVA_AC1_NUMBER 26 -#endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PGE) \ - || defined(TM4C1231H6PZ) || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PZ) || defined(TM4C1237D5PZ) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PZ) \ - || defined(TM4C123BH6ZRB) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE)\ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_AC0_HANDLER VectorA4 -#define TIVA_AC1_HANDLER VectorA8 -#define TIVA_AC2_HANDLER VectorAC - -#define TIVA_AC0_NUMBER 25 -#define TIVA_AC1_NUMBER 26 -#define TIVA_AC2_NUMBER 27 -#endif - -/* PWM units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) -/* No interrupt handler and number.*/ -#endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_PWM0FAULT_HANDLER Vector64 -#define TIVA_PWM0GEN0_HANDLER Vector68 -#define TIVA_PWM0GEN1_HANDLER Vector6C -#define TIVA_PWM0GEN2_HANDLER Vector70 -#define TIVA_PWM0GEN3_HANDLER VectorF4 -#define TIVA_PWM1FAULT_HANDLER Vector268 -#define TIVA_PWM1GEN0_HANDLER Vector258 -#define TIVA_PWM1GEN1_HANDLER Vector25C -#define TIVA_PWM1GEN2_HANDLER Vector260 -#define TIVA_PWM1GEN3_HANDLER Vector264 - -#define TIVA_PWM0FAULT_NUMBER 9 -#define TIVA_PWM0GEN0_NUMBER 10 -#define TIVA_PWM0GEN1_NUMBER 11 -#define TIVA_PWM0GEN2_NUMBER 12 -#define TIVA_PWM0GEN3_NUMBER 45 -#define TIVA_PWM1FAULT_NUMBER 138 -#define TIVA_PWM1GEN0_NUMBER 134 -#define TIVA_PWM1GEN1_NUMBER 135 -#define TIVA_PWM1GEN2_NUMBER 136 -#define TIVA_PWM1GEN3_NUMBER 137 -#endif - -/* QEI units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) -/* No interrupt handler and number.*/ -#endif -#if defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_QEI0_HANLDER Vector74 -#define TIVA_QEI1_HANLDER VectorD8 - -#define TIVA_QEI0_NUMBER 13 -#define TIVA_QEI1_NUMBER 38 -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#endif /* _TIVA_ISR_H_ */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h deleted file mode 100644 index ac7a1d2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h +++ /dev/null @@ -1,504 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TM4C123x/tiva_registry.h - * @brief TM4C123x capabilities registry. - * - * @addtogroup HAL - * @{ - */ - -#ifndef _TIVA_REGISTRY_H_ -#define _TIVA_REGISTRY_H_ - -/*===========================================================================*/ -/* Defined device check. */ -/*===========================================================================*/ - -#if !defined(TM4C1230C3PM) && !defined(TM4C1230D5PM) && \ - !defined(TM4C1230E6PM) && !defined(TM4C1230H6PM) && \ - !defined(TM4C1231C3PM) && !defined(TM4C1231D5PM) && \ - !defined(TM4C1231D5PZ) && !defined(TM4C1231E6PM) && \ - !defined(TM4C1231E6PZ) && !defined(TM4C1231H6PGE) && \ - !defined(TM4C1231H6PM) && !defined(TM4C1231H6PZ) && \ - !defined(TM4C1232C3PM) && !defined(TM4C1232D5PM) && \ - !defined(TM4C1232E6PM) && !defined(TM4C1232H6PM) && \ - !defined(TM4C1233C3PM) && !defined(TM4C1233D5PM) && \ - !defined(TM4C1233D5PZ) && !defined(TM4C1233E6PM) && \ - !defined(TM4C1233E6PZ) && !defined(TM4C1233H6PGE) && \ - !defined(TM4C1233H6PM) && !defined(TM4C1233H6PZ) && \ - !defined(TM4C1236D5PM) && !defined(TM4C1236E6PM) && \ - !defined(TM4C1236H6PM) && !defined(TM4C1237D5PM) && \ - !defined(TM4C1237D5PZ) && !defined(TM4C1237E6PM) && \ - !defined(TM4C1237E6PZ) && !defined(TM4C1237H6PGE) && \ - !defined(TM4C1237H6PM) && !defined(TM4C1237H6PZ) && \ - !defined(TM4C123AE6PM) && !defined(TM4C123AH6PM) && \ - !defined(TM4C123BE6PM) && !defined(TM4C123BE6PZ) && \ - !defined(TM4C123BH6PGE) && !defined(TM4C123BH6PM) && \ - !defined(TM4C123BH6PZ) && !defined(TM4C123BH6ZRB) && \ - !defined(TM4C123FE6PM) && !defined(TM4C123FH6PM) && \ - !defined(TM4C123GE6PM) && !defined(TM4C123GE6PZ) && \ - !defined(TM4C123GH6PGE) && !defined(TM4C123GH6PM) && \ - !defined(TM4C123GH6PZ) && !defined(TM4C123GH6ZRB) && \ - !defined(TM4C123GH5ZXR) -#error "No valid device defined." -#endif - -/** - * @brief Sub-family identifier. - */ -#if !defined(TM4C123x) || defined(__DOXYGEN__) -#define TM4C123x -#endif - -/*===========================================================================*/ -/* Platform capabilities. */ -/*===========================================================================*/ - -/** - * @name TM4C123x capabilities - * @{ - */ - -/* GPIO attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) \ - || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) || defined(TM4C1236D5PM) \ - || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG TRUE -#define TIVA_HAS_GPIOH FALSE -#define TIVA_HAS_GPIOJ FALSE -#define TIVA_HAS_GPIOK FALSE -#define TIVA_HAS_GPIOL FALSE -#define TIVA_HAS_GPIOM FALSE -#define TIVA_HAS_GPION FALSE -#define TIVA_HAS_GPIOP FALSE -#define TIVA_HAS_GPIOQ FALSE -#define TIVA_HAS_GPIOR FALSE -#define TIVA_HAS_GPIOS FALSE -#define TIVA_HAS_GPIOT FALSE -#define TIVA_GPIO_PINS 56 -#endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG FALSE -#define TIVA_HAS_GPIOH FALSE -#define TIVA_HAS_GPIOJ FALSE -#define TIVA_HAS_GPIOK FALSE -#define TIVA_HAS_GPIOL FALSE -#define TIVA_HAS_GPIOM FALSE -#define TIVA_HAS_GPION FALSE -#define TIVA_HAS_GPIOP FALSE -#define TIVA_HAS_GPIOQ FALSE -#define TIVA_HAS_GPIOR FALSE -#define TIVA_HAS_GPIOS FALSE -#define TIVA_HAS_GPIOT FALSE -#define TIVA_GPIO_PINS 48 -#endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PZ) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PZ) \ - || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PZ) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PZ) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG TRUE -#define TIVA_HAS_GPIOH TRUE -#define TIVA_HAS_GPIOJ TRUE -#define TIVA_HAS_GPIOK TRUE -#define TIVA_HAS_GPIOL TRUE -#define TIVA_HAS_GPIOM FALSE -#define TIVA_HAS_GPION FALSE -#define TIVA_HAS_GPIOP FALSE -#define TIVA_HAS_GPIOQ FALSE -#define TIVA_HAS_GPIOR FALSE -#define TIVA_HAS_GPIOS FALSE -#define TIVA_HAS_GPIOT FALSE -#define TIVA_GPIO_PINS 88 -#endif -#if defined(TM4C1231H6PGE) || defined(TM4C1233H6PGE) || defined(TM4C1237H6PGE)\ - || defined(TM4C123BH6PGE) || defined(TM4C123GH6PGE) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG TRUE -#define TIVA_HAS_GPIOH TRUE -#define TIVA_HAS_GPIOJ TRUE -#define TIVA_HAS_GPIOK TRUE -#define TIVA_HAS_GPIOL TRUE -#define TIVA_HAS_GPIOM TRUE -#define TIVA_HAS_GPION TRUE -#define TIVA_HAS_GPIOP TRUE -#define TIVA_HAS_GPIOQ FALSE -#define TIVA_HAS_GPIOR FALSE -#define TIVA_HAS_GPIOS FALSE -#define TIVA_HAS_GPIOT FALSE -#define TIVA_GPIO_PINS 112 -#endif -#if defined(TM4C123BH6ZRB) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG TRUE -#define TIVA_HAS_GPIOH TRUE -#define TIVA_HAS_GPIOJ TRUE -#define TIVA_HAS_GPIOK TRUE -#define TIVA_HAS_GPIOL TRUE -#define TIVA_HAS_GPIOM TRUE -#define TIVA_HAS_GPION TRUE -#define TIVA_HAS_GPIOP TRUE -#define TIVA_HAS_GPIOQ TRUE -#define TIVA_HAS_GPIOR FALSE -#define TIVA_HAS_GPIOS FALSE -#define TIVA_HAS_GPIOT FALSE -#define TIVA_GPIO_PINS 120 -#endif - -/* GPTM attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_GPT0 TRUE -#define TIVA_HAS_GPT1 TRUE -#define TIVA_HAS_GPT2 TRUE -#define TIVA_HAS_GPT3 TRUE -#define TIVA_HAS_GPT4 TRUE -#define TIVA_HAS_GPT5 TRUE -#define TIVA_HAS_GPT6 FALSE -#define TIVA_HAS_GPT7 FALSE -#define TIVA_HAS_WGPT0 TRUE -#define TIVA_HAS_WGPT1 TRUE -#define TIVA_HAS_WGPT2 TRUE -#define TIVA_HAS_WGPT3 TRUE -#define TIVA_HAS_WGPT4 TRUE -#define TIVA_HAS_WGPT5 TRUE -#endif - -/* WDT attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_WDT0 TRUE -#define TIVA_HAS_WDT1 TRUE -#endif - -/* ADC attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_ADC0 TRUE -#define TIVA_HAS_ADC1 TRUE -#endif - -/* UART attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_UART0 TRUE -#define TIVA_HAS_UART1 TRUE -#define TIVA_HAS_UART2 TRUE -#define TIVA_HAS_UART3 TRUE -#define TIVA_HAS_UART4 TRUE -#define TIVA_HAS_UART5 TRUE -#define TIVA_HAS_UART6 TRUE -#define TIVA_HAS_UART7 TRUE -#endif - -/* SPI attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_SSI0 TRUE -#define TIVA_HAS_SSI1 TRUE -#define TIVA_HAS_SSI2 TRUE -#define TIVA_HAS_SSI3 TRUE -#endif - -/* I2C attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PZ) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PGE) \ - || defined(TM4C1233H6PZ) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) \ - || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_I2C0 TRUE -#define TIVA_HAS_I2C1 TRUE -#define TIVA_HAS_I2C2 TRUE -#define TIVA_HAS_I2C3 TRUE -#define TIVA_HAS_I2C4 TRUE -#define TIVA_HAS_I2C5 TRUE -#define TIVA_HAS_I2C6 FALSE -#define TIVA_HAS_I2C7 FALSE -#define TIVA_HAS_I2C8 FALSE -#define TIVA_HAS_I2C9 FALSE -#endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) -#define TIVA_HAS_I2C0 TRUE -#define TIVA_HAS_I2C1 TRUE -#define TIVA_HAS_I2C2 TRUE -#define TIVA_HAS_I2C3 TRUE -#define TIVA_HAS_I2C4 FALSE -#define TIVA_HAS_I2C5 FALSE -#define TIVA_HAS_I2C6 FALSE -#define TIVA_HAS_I2C7 FALSE -#define TIVA_HAS_I2C8 FALSE -#define TIVA_HAS_I2C9 FALSE -#endif - -/* CAN attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) -#define TIVA_HAS_CAN0 TRUE -#define TIVA_HAS_CAN1 FALSE -#endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_CAN0 TRUE -#define TIVA_HAS_CAN1 TRUE -#endif - -/* USB attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) -#define TIVA_HAS_USB0 FALSE -#endif -#if defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) \ - || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) \ - || defined(TM4C123GH5ZXR) -#define TIVA_HAS_USB0 TRUE -#endif - -/* AC attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231E6PM) || defined(TM4C1231H6PM) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) || defined(TM4C1233E6PM) \ - || defined(TM4C1233H6PM) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PM) || defined(TM4C1237E6PM) \ - || defined(TM4C1237H6PM) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BH6PM) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) -#define TIVA_HAS_AC0 TRUE -#define TIVA_HAS_AC1 TRUE -#define TIVA_HAS_AC2 FALSE -#endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PGE) \ - || defined(TM4C1231H6PZ) || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PZ) || defined(TM4C1237D5PZ) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PZ) \ - || defined(TM4C123BH6ZRB) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE)\ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_AC0 TRUE -#define TIVA_HAS_AC1 TRUE -#define TIVA_HAS_AC2 TRUE -#endif - -/* PWM attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) -#define TIVA_HAS_PWM0 FALSE -#define TIVA_HAS_PWM1 FALSE -#endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_PWM0 TRUE -#define TIVA_HAS_PWM1 TRUE -#endif - -/* QEI attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) -#define TIVA_HAS_QEI0 FALSE -#define TIVA_HAS_QEI1 FALSE -#endif -#if defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) -#define TIVA_HAS_QEI0 TRUE -#define TIVA_HAS_QEI1 TRUE -#endif - -/** - * @} - */ - -#endif /* _TIVA_REGISTRY_H_ */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h deleted file mode 100644 index d64afa8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h +++ /dev/null @@ -1,958 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @addtogroup CMSIS - * @{ - */ - -/** - * @addtogroup TM4C123x - * @{ - */ - -#ifndef __TM4C123x_H -#define __TM4C123x_H - -/** - * @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001 /**< Cortex-M4 Core Revision */ -#define __MPU_PRESENT 1 /**< MPU present */ -#define __NVIC_PRIO_BITS 3 /**< Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /**< Use different SysTick Config */ -#define __FPU_PRESENT 1 /**< FPU present */ - -/** - * @brief TM4C123x Interrupt Number Definitions - */ -typedef enum IRQn -{ - /***** Cortex-M4 Processor Exceptions Numbers ******************************/ - NonMaskableInt_IRQn = -14, /**< Cortex-M4 Non-Maskable Interrupt */ - HardFault_IRQn = -13, /**< Cortex-M4 Hard Fault Interrupt */ - MemoryManagement_IRQn = -12, /**< Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /**< Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /**< Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /**< Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /**< Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -3, /**< Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /**< Cortex-M4 System Tick Interrupt */ - /***** TM4C123x Specific Interrupt Numbers *********************************/ - GPIOA_IRQn = 0, /**< GPIO Port A */ - GPIOB_IRQn = 1, /**< GPIO Port B */ - GPIOC_IRQn = 2, /**< GPIO Port C */ - GPIOD_IRQn = 3, /**< GPIO Port D */ - GPIOE_IRQn = 4, /**< GPIO Port E */ - UART0_IRQn = 5, /**< UART0 */ - UART1_IRQn = 6, /**< UART1 */ - SSI0_IRQn = 7, /**< SSI0 */ - I2C0_IRQn = 8, /**< I2C0 */ - PWM0FAULT_IRQn = 9, /**< PWM0 Fault */ - PWM0GEN0_IRQn = 10, /**< PWM0 Generator 0 */ - PWM0GEN1_IRQn = 11, /**< PWM0 Generator 1 */ - PWM0GEN2_IRQn = 12, /**< PWM0 Generator 2 */ - QEI0_IRQn = 13, /**< QEI0 */ - ADC0SEQ0_IRQn = 14, /**< ADC0 Sequence 0 */ - ADC0SEQ1_IRQn = 15, /**< ADC0 Sequence 1 */ - ADC0SEQ2_IRQn = 16, /**< ADC0 Sequence 2 */ - ADC0SEQ3_IRQn = 17, /**< ADC0 Sequence 3 */ - WATCHDOG_IRQn = 18, /**< Watchdog Timers 0 and 1 */ - TIMER0A_IRQn = 19, /**< 16/32-Bit Timer 0A */ - TIMER0B_IRQn = 20, /**< 16/32-Bit Timer 0B */ - TIMER1A_IRQn = 21, /**< 16/32-Bit Timer 1A */ - TIMER1B_IRQn = 22, /**< 16/32-Bit Timer 1B */ - TIMER2A_IRQn = 23, /**< 16/32-Bit Timer 2A */ - TIMER2B_IRQn = 24, /**< 16/32-Bit Timer 2B */ - ACOMP0_IRQn = 25, /**< Analog Comparator 0 */ - ACOMP1_IRQn = 26, /**< Analog Comparator 1 */ - SYSCON_IRQn = 28, /**< System Control */ - FMCEECON_IRQn = 29, /**< Flash Memory Control and EEPROM Control */ - GPIOF_IRQn = 30, /**< GPIO Port F */ - UART2_IRQn = 33, /**< UART2 */ - SSI1_IRQn = 34, /**< SSI1 */ - TIMER3A_IRQn = 35, /**< 16/32-Bit Timer 3A */ - TIMER3B_IRQn = 36, /**< 16/32-Bit Timer 3B */ - I2C1_IRQn = 37, /**< I2C1 */ - QEI1_IRQn = 38, /**< QEI1 */ - CAN0_IRQn = 39, /**< CAN0 */ - CAN1_IRQn = 40, /**< CAN1 */ - HIBMODULE_IRQn = 43, /**< Hibernation Module */ - USB_IRQn = 44, /**< USB */ - PWM0GEN3_IRQn = 45, /**< PWM0 Generator 3 */ - UDMASFW_IRQn = 46, /**< UDMA Software */ - UDMAERR_IRQn = 47, /**< UDMA Error */ - ADC1SEQ0_IRQn = 48, /**< ADC1 Sequence 0 */ - ADC1SEQ1_IRQn = 49, /**< ADC1 Sequence 1 */ - ADC1SEQ2_IRQn = 50, /**< ADC1 Sequence 2 */ - ADC1SEQ3_IRQn = 51, /**< ADC1 Sequence 3 */ - SSI2_IRQn = 57, /**< SSI2 */ - SSI3_IRQn = 58, /**< SSI3 */ - UART3_IRQn = 59, /**< UART3 */ - UART4_IRQn = 60, /**< UART4 */ - UART5_IRQn = 61, /**< UART5 */ - UART6_IRQn = 62, /**< UART6 */ - UART7_IRQn = 63, /**< UART7 */ - I2C2_IRQn = 68, /**< I2C2 */ - I2C3_IRQn = 69, /**< I2C3 */ - TIMER4A_IRQn = 70, /**< 16/32-Bit Timer 4A */ - TIMER4B_IRQn = 71, /**< 16/32-Bit Timer 4B */ - TIMER5A_IRQn = 92, /**< 16/32-Bit Timer 5A */ - TIMER5B_IRQn = 93, /**< 16/32-Bit Timer 5B */ - WTIMER0A_IRQn = 94, /**< 32/64-Bit Timer 0A */ - WTIMER0B_IRQn = 95, /**< 32/64-Bit Timer 0B */ - WTIMER1A_IRQn = 96, /**< 32/64-Bit Timer 1A */ - WTIMER1B_IRQn = 97, /**< 32/64-Bit Timer 1B */ - WTIMER2A_IRQn = 98, /**< 32/64-Bit Timer 2A */ - WTIMER2B_IRQn = 99, /**< 32/64-Bit Timer 2B */ - WTIMER3A_IRQn = 100, /**< 32/64-Bit Timer 3A */ - WTIMER3B_IRQn = 101, /**< 32/64-Bit Timer 3B */ - WTIMER4A_IRQn = 102, /**< 32/64-Bit Timer 4A */ - WTIMER4B_IRQn = 103, /**< 32/64-Bit Timer 4B */ - WTIMER5A_IRQn = 104, /**< 32/64-Bit Timer 5A */ - WTIMER5B_IRQn = 105, /**< 32/64-Bit Timer 5B */ - SYSEXCEPT_IRQn = 106, /**< System Exception (imprecise) */ - PWM1GEN0_IRQn = 134, /**< PWM1 Generator 0 */ - PWM1GEN1_IRQn = 135, /**< PWM1 Generator 1 */ - PWM1GEN2_IRQn = 136, /**< PWM1 Generator 2 */ - PWM1GEN3_IRQn = 137, /**< PWM1 Generator 3 */ - PWM1FAULT_IRQn = 138 /**< PWM1 Fault */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals.*/ -#include - -/** - * @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog Comparator - */ -typedef struct -{ - __IO uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t REFCTL; /**< Reference Voltage Control */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __I uint32_t STAT0; /**< Status 0 */ - __IO uint32_t CTL0; /**< Control 0 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t STAT1; /**< Status 1 */ - __IO uint32_t CTL1; /**< Control 1 */ - __I uint32_t _RESERVED3[990];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} ACMP_TypeDef; - -/** - * @brief Analog-to-Digital Converter - */ -typedef struct -{ - __IO uint32_t MUX; /**< Sample Sequence Input Multiplexer - Select */ - __IO uint32_t CTL; /**< Sample Sequence Control */ - __I uint32_t FIFO; /**< Sample Sequence Result FIFO */ - __I uint32_t FSTAT; /**< Sample Sequence FIFO Status */ - __IO uint32_t OP; /**< Sample Sequence Operation */ - __IO uint32_t DC; /**< Sample Sequence Digital Comparator - Select */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ -} ADC_SS_t; - -typedef struct -{ - __IO uint32_t ACTSS; /**< Active Sample Sequencer */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IM; /**< Interrupt Mask */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t OSTAT; /**< Overflow Status */ - __IO uint32_t EMUX; /**< Event Multiplexer Select */ - __IO uint32_t USTAT; /**< Underflow Status */ - __IO uint32_t TSSEL; /**< Trigger Source Select */ - __IO uint32_t SSPRI; /**< Sample Sequencer Priority */ - __IO uint32_t SPC; /**< Sample Phase Control */ - __IO uint32_t PSSI; /**< Processor Sample Sequence Initiate */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t SAC; /**< Sample Averaging Control */ - __IO uint32_t DCISC; /**< Digital Comparator Interrupt Status and - Clear */ - __IO uint32_t CTL; /**< Control */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - ADC_SS_t SS[4]; /**< Sample Sequence 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[784];/**< Reserved */ - __O uint32_t DCRIC; /**< Digital Comparator Reset Initial - Conditions */ - __I uint32_t _RESERVED3[63]; /**< Reserved */ - __IO uint32_t DCCTL[8]; /**< Digital Comparator Control 0 - 7 */ - __I uint32_t _RESERVED4[8]; /**< Reserved */ - __IO uint32_t DCCMP[8]; /**< Digital Comparator Range 0 - 7 */ - __I uint32_t _RESERVED5[88]; /**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __IO uint32_t PC; /**< Peripheral Configuration */ - __IO uint32_t CC; /**< Clock Configuration */ -} ADC_TypeDef; - -/** - * @brief Controller Area Network - */ -typedef struct -{ - __IO uint32_t CRQ; /**< Command Request */ - __IO uint32_t CMSK; /**< Command Mask */ - __IO uint32_t MSK[2]; /**< Mask 1 and 2 */ - __IO uint32_t ARB[2]; /**< Arbitration 1 and 2 */ - __IO uint32_t MCTL; /**< Message Control */ - __IO uint32_t DA[2]; /**< Data A1 and A2 */ - __IO uint32_t DB[2]; /**< Data B1 and B2 */ - __I uint32_t _RESERVED0[13]; /**< Reserved */ -} CAN_INTERFACE_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t STS; /**< Status */ - __I uint32_t ERR; /**< Error Counter */ - __IO uint32_t BIT; /**< Bit Timing */ - __I uint32_t INT; /**< Interrupt */ - __IO uint32_t TST; /**< Test */ - __IO uint32_t BRPE; /**< Baud Rate Prescaler Extension */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - CAN_INTERFACE_t IF[2]; /**< IF1 and IF2 */ - __I uint32_t _RESERVED1[8]; /**< Reserved */ - __I uint32_t TXRQ[2]; /**< Transmission Request 1 and 2 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t NWDA[2]; /**< New Data 1 and 2 */ - __I uint32_t _RESERVED3[6]; /**< Reserved */ - __I uint32_t MSGINT[2]; /**< Message 1 and 2 Interrupt Pending */ - __I uint32_t _RESERVED4[6]; /**< Reserved */ - __I uint32_t MSGVAL[2]; /**< Message 1 and 2 Valid */ -} CAN_TypeDef; - -/** - * @brief EEPROM Memory - */ -typedef struct -{ - __IO uint32_t EESIZE; /**< Size Information */ - __IO uint32_t EEBLOCK; /**< Current Block */ - __IO uint32_t EEOFFSET; /**< Current Offset */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t EERDWR; /**< Read-Write */ - __IO uint32_t EERDWRINC; /**< Read-Write with Increment */ - __IO uint32_t EEDONE; /**< Done Status */ - __IO uint32_t EESUPP; /**< Support Control and Status */ - __IO uint32_t EEUNLOCK; /**< Unlock */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t EEPROT; /**< Protection */ - __IO uint32_t EEPASS[3]; /**< Password */ - __IO uint32_t EEINT; /**< Interrupt */ - __I uint32_t _RESERVED2[3]; /**< Reserved */ - __IO uint32_t EEHIDE; /**< Block Hide */ - __I uint32_t _RESERVED3[11]; /**< Reserved */ - __IO uint32_t EEDBGME; /**< Debug Mass Erase */ - __I uint32_t _RESERVED4[975];/**< Reserved */ - __IO uint32_t EEPROMPP; /**< Peripheral Properties */ -} EEPROM_TypeDef; - -/** - * @brief Flash Memory - */ -typedef struct -{ - __IO uint32_t FMA; /**< Flash Memory Address */ - __IO uint32_t FMD; /**< Flash Memory Data */ - __IO uint32_t FMC; /**< Flash Memory Control */ - __I uint32_t FCRIS; /**< Flash Controller Raw Interrupt Status */ - __IO uint32_t FCIM; /**< Flash Controller Interrupt Mask */ - __IO uint32_t FCMISC; /**< Masked Interrupt Status and Clear */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ - __IO uint32_t FMC2; /**< Flash Memory Control 2 */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t FWBVAL; /**< Flash Write Buffer Valid */ - __I uint32_t _RESERVED2[51]; /**< Reserved */ - __IO uint32_t FWBN; /**< Flash Write Buffer n */ - __I uint32_t _RESERVED3[943];/**< Reserved */ - __I uint32_t FSIZE; /**< Flash Size */ - __I uint32_t SSIZE; /**< SRAM Size */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t ROMSWMAP; /**< ROM Software Map */ -} FLASH_TypeDef; - -/** - * @brief General Purpose Input/Outputs - */ -typedef struct -{ - union { - __IO uint32_t MASKED_ACCESS[256]; /**< Masked access of Data Register */ - struct { - __I uint32_t _RESERVED0[255]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ - }; - }; - __IO uint32_t DIR; /**< Direction */ - __IO uint32_t IS; /**< Interrupt Sense */ - __IO uint32_t IBE; /**< Interrupt Both Edges */ - __IO uint32_t IEV; /**< Interrupt Event */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t AFSEL; /**< Alternate Function Select */ - __I uint32_t _RESERVED1[55]; /**< Reserved */ - __IO uint32_t DR2R; /**< 2-mA Drive Select */ - __IO uint32_t DR4R; /**< 4-mA Drive Select */ - __IO uint32_t DR8R; /**< 8-mA Drive Select */ - __IO uint32_t ODR; /**< Open Drain Select */ - __IO uint32_t PUR; /**< Pull-Up Select */ - __IO uint32_t PDR; /**< Pull-Down Select */ - __IO uint32_t SLR; /**< Slew Rate Control Select */ - __IO uint32_t DEN; /**< Digital Enable */ - __IO uint32_t LOCK; /**< Lock */ - __IO uint32_t CR; /**< Commit */ - __IO uint32_t AMSEL; /**< Analog Mode Select */ - __IO uint32_t PCTL; /**< Port Control */ - __IO uint32_t ADCCTL; /**< ADC Control */ - __IO uint32_t DMACTL; /**< DMA Control */ -} GPIO_TypeDef; - -/** - * @brief General Purpose Timer - */ -typedef struct -{ - __IO uint32_t CFG; /**< Configuration */ - __IO uint32_t TAMR; /**< Timer A Mode */ - __IO uint32_t TBMR; /**< Timer B Mode */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t SYNC; /**< Synchronize */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t IMR; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t TAILR; /**< Timer A Interval Load */ - __IO uint32_t TBILR; /**< Timer B Interval Load */ - __IO uint32_t TAMATCHR; /**< Timer A Match */ - __IO uint32_t TBMATCHR; /**< Timer B Match */ - __IO uint32_t TAPR; /**< Timer A Prescale */ - __IO uint32_t TBPR; /**< Timer B Prescale */ - __IO uint32_t TAPMR; /**< Timer A Prescale Match */ - __IO uint32_t TBPMR; /**< Timer B Prescale Match */ - __I uint32_t TAR; /**< Timer A */ - __I uint32_t TBR; /**< Timer B */ - __IO uint32_t TAV; /**< Timer A Value */ - __IO uint32_t TBV; /**< Timer B Value */ - __I uint32_t RTCPD; /**< RTC Predivide */ - __I uint32_t TAPS; /**< Timer A Prescale Snapshot */ - __I uint32_t TBPS; /**< Timer B Prescale Snapshot */ - __I uint32_t TAPV; /**< Timer A Prescale Value */ - __I uint32_t TBPV; /**< Timer B Prescale Value */ - __I uint32_t _RESERVED1[981];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} GPT_TypeDef; - -/** - * @brief Hibernation Module - */ -typedef struct -{ - __I uint32_t RTCC; /**< RTC Counter */ - __IO uint32_t RTCM0; /**< RTC Match 0 */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t RTCLD; /**< RTC Load */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __IO uint32_t IC; /**< Interrupt Clear */ - __IO uint32_t RTCT; /**< RTC Trim */ - __IO uint32_t RTCSS; /**< RTC Sub Seconds */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ -} HIB_TypeDef; - -/** - * @brief Inter-Integrated Circuit - */ -typedef struct -{ - __IO uint32_t MSA; /**< Master Slave Address */ - __IO uint32_t MCS; /**< Master Control/Status */ - __IO uint32_t MDR; /**< Master Data */ - __IO uint32_t MTPR; /**< Master Timer Period */ - __IO uint32_t MIMR; /**< Master Interrupt Mask */ - __I uint32_t MRIS; /**< Master Raw Interrupt Status */ - __IO uint32_t MMIS; /**< Master Masked Interrupt Status */ - __O uint32_t MICR; /**< Master Interrupt Clear */ - __IO uint32_t MCR; /**< Master Configuration */ - __IO uint32_t MCLKOCNT; /**< Master Clock Low Timeout Count */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __I uint32_t MBMON; /**< Master Bus Monitor */ - __IO uint32_t MCR2; /**< Master Configuration 2 */ - __I uint32_t _RESERVED1[497];/**< Reserved */ - __IO uint32_t SOAR; /**< Slave Own Address */ - __IO uint32_t SCSR; /**< Slave Control/Status */ - __IO uint32_t SDR; /**< Slave Data */ - __IO uint32_t SIMR; /**< Slave Interrupt Mask */ - __I uint32_t SRIS; /**< Slave Raw Interrupt Status */ - __I uint32_t SMIS; /**< Slave Masked Interrupt Status */ - __O uint32_t SICR; /**< Slave Interrupt Clear */ - __IO uint32_t SOAR2; /**< Slave Own Address 2 */ - __IO uint32_t SACKCTL; /**< Slave ACK Control */ - __I uint32_t _RESERVED2[487];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t PC; /**< Peripheral Configuration */ -} I2C_TypeDef; - -/* - * @brief Pulse Width Modulator - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t INTEN; /**< Interrupt and Trigger Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t COUNT; /**< Counter */ - __IO uint32_t CMP[2]; /**< Compare A, B */ - __IO uint32_t GEN[2]; /**< Generator A, B Control */ - __IO uint32_t DBCTL; /**< Dead-Band Control */ - __IO uint32_t DBRISE; /**< Dead-Band Rising-Edge Delay */ - __IO uint32_t DBFALL; /**< Dead-Band Falling-Edge Delay */ - __IO uint32_t FLTSRC[2]; /**< Fault Source 0, 1 */ - __IO uint32_t MINFLTPER; /**< Minimum Fault Period */ -} PWM_GENERATOR_T; - -typedef struct -{ - union { - __IO uint32_t SEN; /**< Fault Pin Logic Sense, for GEN 0 and 1 */ - __I uint32_t _RESERVED0[1];/**< Reserved, for GEN 2 and 3 */ - }; - __IO uint32_t STAT[2]; /**< Fault Status */ - __I uint32_t _RESERVED1[29]; /**< Reserved */ -} PWM_FLT_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Master Control */ - __IO uint32_t SYNC; /**< Time Base Sync */ - __IO uint32_t ENABLE; /**< Output Enable */ - __IO uint32_t INVERT; /**< Output Inversion */ - __IO uint32_t FAULT; /**< Output Fault */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __I uint32_t STATUS; /**< Status */ - __IO uint32_t FAULTVAL; /**< Fault Condition Value */ - __IO uint32_t ENUPD; /**< Enable Update */ - __I uint32_t _RESERVED0[5]; /**< Reserved */ - __IO PWM_GENERATOR_T PWM[4]; /**< PWM Generator 0, 1, 2 and 3 */ - __I uint32_t _RESERVED1[432];/**< Reserved */ - PWM_FLT_t FLT[4]; /**< Fault registers 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[368];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} PWM_TypeDef; - -/** - * @brief Quadrature Encoder Interface - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __I uint32_t STAT; /**< Status */ - __IO uint32_t POS; /**< Position */ - __IO uint32_t MAXPOS; /**< Maximum Position */ - __IO uint32_t LOAD; /**< Timer Load */ - __I uint32_t TIME; /**< Timer */ - __I uint32_t COUNT; /**< Velocity Counter */ - __I uint32_t SPEED; /**< Velocity */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ -} QEI_TypeDef; - -/** - * @brief Synchronous Serial Interface - */ -typedef struct -{ - __IO uint32_t CR0; /**< Control 0 */ - __IO uint32_t CR1; /**< Control 1 */ - __IO uint32_t DR; /**< Data */ - __I uint32_t SR; /**< Status */ - __IO uint32_t CPSR; /**< Clock Prescale */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED0[1000];/**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} SSI_TypeDef; - -/** - * @brief System Control - */ -typedef struct -{ - __I uint32_t DID0; /**< Device Identification 0 */ - __I uint32_t DID1; /**< Device Identification 1 */ - __I uint32_t RESERVED0[10]; /**< Reserved */ - __IO uint32_t PBORCTL; /**< Brown-Out Reset Control */ - __I uint32_t RESERVED1[7]; /**< Reserved */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IMC; /**< Interrupt Mask Control */ - __IO uint32_t MISC; /**< Interrupt Status and Clear */ - __IO uint32_t RESC; /**< Reset Cause */ - __IO uint32_t RCC; /**< Run-Mode Clock Configuration */ - __I uint32_t RESERVED2[2]; /**< Reserved */ - __IO uint32_t GPIOHBCTL; /**< GPIO High-Performance Bus Control */ - __IO uint32_t RCC2; /**< Run-Mode Clock Configuration 2 */ - __I uint32_t RESERVED3[2]; /**< Reserved */ - __IO uint32_t MOSCCTL; /**< Main Oscillator Control */ - __I uint32_t RESERVED4[49]; /**< Reserved */ - __IO uint32_t DSLPCLKCFG; /**< Deep Sleep Clock Configuration */ - __I uint32_t RESERVED5[1]; /**< Reserved */ - __I uint32_t SYSPROP; /**< System Properties */ - __IO uint32_t PIOSCCAL; /**< PIOSC Calibration */ - __I uint32_t PIOSCSTAT; /**< PIOSC Statistics */ - __I uint32_t RESERVED6[2]; /**< Reserved */ - __I uint32_t PLLFREQ0; /**< PLL Frequency 0 */ - __I uint32_t PLLFREQ1; /**< PLL Frequency 1 */ - __I uint32_t PLLSTAT; /**< PLL Frequency Status */ - __I uint32_t RESERVED7[7]; /**< Reserved */ - __IO uint32_t SLPPWRCFG; /**< Sleep Power Configuration */ - __IO uint32_t DSLPPWRCFG; /**< Deep-Sleep Power Configuration */ - __I uint32_t RESERVED8[9]; /**< Reserved */ - __IO uint32_t LDOSPCTL; /**< LDO Sleep Power Control */ - __I uint32_t LDOSPCAL; /**< LDO Sleep Power Calibration */ - __IO uint32_t LDODPCTL; /**< LDO Deep-Sleep Power Control */ - __I uint32_t LDODPCAL; /**< LDO Deep-Sleep Power Calibration */ - __I uint32_t RESERVED9[2]; /**< Reserved */ - __I uint32_t SDPMST; /**< Sleep/Deep-Sleep Power Mode Status */ - __I uint32_t RESERVED10[76]; /**< Reserved */ - __I uint32_t PPWD; /**< WDT Peripheral Present */ - __I uint32_t PPTIMER; /**< GPT Peripheral Present */ - __I uint32_t PPGPIO; /**< GPIO Peripheral Present */ - __I uint32_t PPDMA; /**< UDMA Peripheral Present */ - __I uint32_t RESERVED11[1]; /**< Reserved */ - __I uint32_t PPHIB; /**< HIB Peripheral Present */ - __I uint32_t PPUART; /**< UART Peripheral Present */ - __I uint32_t PPSSI; /**< SSI Peripheral Present */ - __I uint32_t PPI2C; /**< I2C Peripheral Present */ - __I uint32_t RESERVED12[1]; /**< Reserved */ - __I uint32_t PPUSB; /**< USB Peripheral Present */ - __I uint32_t RESERVED13[2]; /**< Reserved */ - __I uint32_t PPCAN; /**< CAN Peripheral Present */ - __I uint32_t PPADC; /**< ADC Peripheral Present */ - __I uint32_t PPACMP; /**< ACMP Peripheral Present */ - __I uint32_t PPPWM; /**< PWM Peripheral Present */ - __I uint32_t PPQEI; /**< QEI Peripheral Present */ - __I uint32_t RESERVED14[4]; /**< Reserved */ - __I uint32_t PPEEPROM; /**< EEPROM Peripheral Present */ - __I uint32_t PPWTIMER; /**< Wide GPT Peripheral Present */ - __I uint32_t RESERVED15[104];/**< Reserved */ - __IO uint32_t SRWD; /**< WDT Software Reset */ - __IO uint32_t SRTIMER; /**< GPT Software Reset */ - __IO uint32_t SRGPIO; /**< GPIO Software Reset */ - __IO uint32_t SRDMA; /**< UDMA Software Reset */ - __I uint32_t RESERVED16[1]; /**< Reserved */ - __IO uint32_t SRHIB; /**< HIB Software Reset */ - __IO uint32_t SRUART; /**< UART Software Reset */ - __IO uint32_t SRSSI; /**< SSI Software Reset */ - __IO uint32_t SRI2C; /**< I2C Software Reset */ - __I uint32_t RESERVED17[1]; /**< Reserved */ - __IO uint32_t SRUSB; /**< USB Software Reset */ - __I uint32_t RESERVED18[2]; /**< Reserved */ - __IO uint32_t SRCAN; /**< CAN Software Reset */ - __IO uint32_t SRADC; /**< ADC Software Reset */ - __IO uint32_t SRACMP; /**< ACMP Software Reset */ - __IO uint32_t SRPWM; /**< PWM Software Reset */ - __IO uint32_t SRQEI; /**< QEI Software Reset */ - __I uint32_t RESERVED19[4]; /**< Reserved */ - __IO uint32_t SREEPROM; /**< EEPROM Software Reset */ - __IO uint32_t SRWTIMER; /**< Wide GPT Software Reset */ - __I uint32_t RESERVED20[40]; /**< Reserved */ - __IO uint32_t RCGCWD; /**< WDT Run Mode Clock Gating Control */ - __IO uint32_t RCGCTIMER; /**< GPT Run Mode Clock Gating Control */ - __IO uint32_t RCGCGPIO; /**< GPIO Run Mode Clock Gating Control */ - __IO uint32_t RCGCDMA; /**< UDMA Run Mode Clock Gating Control */ - __I uint32_t RESERVED21[1]; /**< Reserved */ - __IO uint32_t RCGCHIB; /**< HIB Run Mode Clock Gating Control */ - __IO uint32_t RCGCUART; /**< UART Run Mode Control */ - __IO uint32_t RCGCSSI; /**< SSI Run Mode Clock Gating Control */ - __IO uint32_t RCGCI2C; /**< I2C Run Mode Clock Gating Control */ - __I uint32_t RESERVED22[1]; /**< Reserved */ - __IO uint32_t RCGCUSB; /**< USB Run Mode Clock Gating Control */ - __I uint32_t RESERVED23[2]; /**< Reserved */ - __IO uint32_t RCGCCAN; /**< CAN Run Mode Clock Gating Control */ - __IO uint32_t RCGCADC; /**< ADC Run Mode Clock Gating Control */ - __IO uint32_t RCGCACMP; /**< ACMP Run Mode Clock Gating Control */ - __IO uint32_t RCGCPWM; /**< PWM Run Mode Clock Gating Control */ - __IO uint32_t RCGCQEI; /**< QEI Run Mode Clock Gating Control */ - __I uint32_t RESERVED24[4]; /**< Reserved */ - __IO uint32_t RCGCEEPROM; /**< EEPROM Run Mode Clock Gating Control */ - __IO uint32_t RCGCWTIMER; /**< Wide GPT Run Mode Clock Gating Control */ - __I uint32_t RESERVED25[40]; /**< Reserved */ - __IO uint32_t SCGCWD; /**< WDT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCTIMER; /**< GPT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCGPIO; /**< GPIO Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCDMA; /**< UDMA Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED26[1]; /**< Reserved */ - __IO uint32_t SCGCHIB; /**< HIB Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCUART; /**< UART Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCSSI; /**< SSI Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCI2C; /**< I2C Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED27[1]; /**< Reserved */ - __IO uint32_t SCGCUSB; /**< USB Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED28[2]; /**< Reserved */ - __IO uint32_t SCGCCAN; /**< CAN Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCADC; /**< ADC Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCACMP; /**< ACMP Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCPWM; /**< PWM Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCQEI; /**< QEI Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED29[4]; /**< Reserved */ - __IO uint32_t SCGCEEPROM; /**< EEPROM Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCWTIMER; /**< Wide GPT Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED30[40]; /**< Reserved */ - __IO uint32_t DCGCWD; /**< WDT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCTIMER; /**< GPT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCGPIO; /**< GPIO Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCDMA; /**< UDMA Deep-Sleep Mode Clock Gating - Control */ - __I uint32_t RESERVED31[1]; /**< Reserved */ - __IO uint32_t DCGCHIB; /**< HIB Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCUART; /**< UART Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCSSI; /**< SSI Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCI2C; /**< I2C Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED32[1]; /**< Reserved */ - __IO uint32_t DCGCUSB; /**< USB Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED33[2]; /**< Reserved */ - __IO uint32_t DCGCCAN; /**< CAN Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCADC; /**< ADC Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCACMP; /**< ACMP Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCPWM; /**< PWM Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCQEI; /**< QEI Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED34[4]; /**< Reserved */ - __IO uint32_t DCGCEEPROM; /**< EEPROM Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCWTIMER; /**< Wide GPT Deep-Sleep Mode Clock Gating - Control */ - __I uint32_t RESERVED35[104];/**< Reserved */ - __IO uint32_t PRWD; /**< WDT Peripheral Ready */ - __IO uint32_t PRTIMER; /**< GPT Peripheral Ready */ - __IO uint32_t PRGPIO; /**< GPIO Peripheral Ready */ - __IO uint32_t PRDMA; /**< UDMA Peripheral Ready */ - __I uint32_t RESERVED36[1]; /**< Reserved */ - __IO uint32_t PRHIB; /**< HIB Peripheral Ready */ - __IO uint32_t PRUART; /**< UART Peripheral Ready */ - __IO uint32_t PRSSI; /**< SSI Peripheral Ready */ - __IO uint32_t PRI2C; /**< I2C Peripheral Ready */ - __I uint32_t RESERVED37[1]; /**< Reserved */ - __IO uint32_t PRUSB; /**< USB Peripheral Ready */ - __I uint32_t RESERVED38[2]; /**< Reserved */ - __IO uint32_t PRCAN; /**< CAN Peripheral Ready */ - __IO uint32_t PRADC; /**< ADC Peripheral Ready */ - __IO uint32_t PRACMP; /**< ACMP Peripheral Ready */ - __IO uint32_t PRPWM; /**< PWM Peripheral Ready */ - __IO uint32_t PRQEI; /**< QEI Peripheral Ready */ - __I uint32_t RESERVED39[4]; /**< Reserved */ - __IO uint32_t PREEPROM; /**< EEPROM Peripheral Ready */ - __IO uint32_t PRWTIMER; /**< Wide GPT Peripheral Ready */ -} SYSCTL_TypeDef; - -/** - * @brief Universal Asynchronous Receiver/Transmitter - */ -typedef struct -{ - __IO uint32_t DR; /**< Data */ - union { - __I uint32_t RSR; /**< Receive Status */ - __O uint32_t ECR; /**< Error Clear */ - }; - __I uint32_t _RESERVED0[4]; /**< Reserved */ - __I uint32_t FR; /**< Flag */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t ILPR; /**< IrDA Low-Power Register */ - __IO uint32_t IBRD; /**< Integer Baud-Rate Divisor */ - __IO uint32_t FBRD; /**< Fractional Baud-Rate Divisor */ - __IO uint32_t LCRH; /**< Line Control */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IFLS; /**< Interrupt FIFO Level Select */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED2[22]; /**< Reserved */ - __IO uint32_t BIT9ADDR; /**< 9-Bit Self Address */ - __IO uint32_t BIT9AMASK; /**< 9-Bit Self Address Mask */ - __I uint32_t _RESERVED3[965];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} UART_TypeDef; - -/** - * @brief Micro Direct Memory Access - */ -typedef struct -{ - __IO uint32_t SET; /**< Set */ - __O uint32_t CLR; /**< Clear */ -} UDMA_SC_t; - -typedef struct -{ - __IO uint32_t STAT; /**< Status */ - __O uint32_t CFG; /**< Configuration */ - __IO uint32_t CTLBASE; /**< Channel Control Base Pointer */ - __IO uint32_t ALTBASE; /**< Alternate Channel Control Base Pointer */ - __IO uint32_t WAITSTAT; /**< Channel Wait-on-Request Status */ - __O uint32_t SWREQ; /**< Channel Software Request */ - __IO uint32_t USEBURSTSET; /**< Channel Useburst Set */ - __O uint32_t USEBURSTCLR; /**< Channel Useburst Clear */ - __IO uint32_t REQMASKSET; /**< Channel Request Mask Set */ - __O uint32_t REQMASKCLR; /**< Channel Request Mask Clear */ - __IO uint32_t ENASET; /**< Channel Enable Set */ - __O uint32_t ENACLR; /**< Channel Enable Clear */ - __IO uint32_t ALTSET; /**< Channel Primary Alternate Set */ - __O uint32_t ALTCLR; /**< Channel Primary Alternate Clear */ - __IO uint32_t PRIOSET; /**< Channel Priority Set */ - __O uint32_t PRIOCLR; /**< Channel Priority Clear */ - __I uint32_t _RESERVED0[3]; /**< Reserved */ - __IO uint32_t ERRCLR; /**< Bus Error Clear */ - __I uint32_t _RESERVED1[300];/**< Reserved */ - __IO uint32_t CHASGN; /**< Channel Assignment */ - __IO uint32_t CHIS; /**< Channel Interrupt Status */ - __I uint32_t _RESERVED2[2]; /**< Reserved */ - __IO uint32_t CHMAP[4]; /**< Channel Map Select 0, 1, 2 and 3 */ -} UDMA_TypeDef; - -// USB - -/** - * @brief Watchdog Timer - */ -typedef struct -{ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t VALUE; /**< Value */ - __IO uint32_t CTL; /**< Control */ - __O uint32_t ICR; /**< Interrupt Clear */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t _RESERVED0[256];/**< Reserved */ - __IO uint32_t TEST; /**< Test */ - __I uint32_t _RESERVED1[505];/**< Reserved */ - __IO uint32_t LOCK; /**< Lock */ -} WDT_TypeDef; - -/** - * @} - */ - -/** - * @addtogroup Peripheral_memorymap - * @{ - */ - -#define SYSCTL_BASE 0x400FE000 -#define HIB_BASE 0x400FC000 -#define FLASH_BASE 0x400FD000 -#define EEPROM_BASE 0x400AF000 -#define UDMA_BASE 0x400FF000 -#define GPIOA_APB_BASE 0x40004000 -#define GPIOA_AHB_BASE 0x40058000 -#define GPIOB_APB_BASE 0x40005000 -#define GPIOB_AHB_BASE 0x40059000 -#define GPIOC_APB_BASE 0x40006000 -#define GPIOC_AHB_BASE 0x4005A000 -#define GPIOD_APB_BASE 0x40007000 -#define GPIOD_AHB_BASE 0x4005B000 -#define GPIOE_APB_BASE 0x40024000 -#define GPIOE_AHB_BASE 0x4005C000 -#define GPIOF_APB_BASE 0x40025000 -#define GPIOF_AHB_BASE 0x4005D000 -#define GPIOG_APB_BASE 0x40026000 -#define GPIOG_AHB_BASE 0x4005E000 -#define GPIOH_APB_BASE 0x40027000 -#define GPIOH_AHB_BASE 0x4005F000 -#define GPIOJ_APB_BASE 0x4003D000 -#define GPIOJ_AHB_BASE 0x40060000 -#define GPIOK_AHB_BASE 0x40061000 -#define GPIOL_AHB_BASE 0x40062000 -#define GPIOM_AHB_BASE 0x40063000 -#define GPION_AHB_BASE 0x40064000 -#define GPIOP_AHB_BASE 0x40065000 -#define GPIOQ_AHB_BASE 0x40066000 -#define GPT0_BASE 0x40030000 -#define GPT1_BASE 0x40031000 -#define GPT2_BASE 0x40032000 -#define GPT3_BASE 0x40033000 -#define GPT4_BASE 0x40034000 -#define GPT5_BASE 0x40035000 -#define WGPT0_BASE 0x40036000 -#define WGPT1_BASE 0x40037000 -#define WGPT2_BASE 0x4004C000 -#define WGPT3_BASE 0x4004D000 -#define WGPT4_BASE 0x4004E000 -#define WGPT5_BASE 0x4004F000 -#define WDT0_BASE 0x40000000 -#define WDT1_BASE 0x40001000 -#define ADC0_BASE 0x40038000 -#define ADC1_BASE 0x40039000 -#define UART0_BASE 0x4000C000 -#define UART1_BASE 0x4000D000 -#define UART2_BASE 0x4000E000 -#define UART3_BASE 0x4000F000 -#define UART4_BASE 0x40010000 -#define UART5_BASE 0x40011000 -#define UART6_BASE 0x40012000 -#define UART7_BASE 0x40013000 -#define SSI0_BASE 0x40008000 -#define SSI1_BASE 0x40009000 -#define SSI2_BASE 0x4000A000 -#define SSI3_BASE 0x4000B000 -#define I2C0_BASE 0x40020000 -#define I2C1_BASE 0x40021000 -#define I2C2_BASE 0x40022000 -#define I2C3_BASE 0x40023000 -#define I2C4_BASE 0x40023000 -#define I2C5_BASE 0x40023000 -#define CAN0_BASE 0x40040000 -#define CAN1_BASE 0x40041000 -// usb -#define ACMP_BASE 0x4003C000 -#define PWM0_BASE 0x40028000 -#define PWM1_BASE 0x40029000 -#define QEI0_BASE 0x4002C000 -#define QEI1_BASE 0x4002D000 - -/** - * @} - */ - -/** - * @addtogroup Peripheral_declaration - * @{ - */ - -#define SYSCTL ((SYSCTL_TypeDef *) SYSCTL_BASE) -#define HIB ((HIB_TypeDef *) HIB_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_BASE) -#define EEPROM ((EEPROM_TypeDef *) EEPROM_BASE) -#define UDMA ((UDMA_TypeDef *) UDMA_BASE) -#define GPIOA_APB ((GPIO_TypeDef *) GPIOA_APB_BASE) -#define GPIOA_AHB ((GPIO_TypeDef *) GPIOA_AHB_BASE) -#define GPIOB_APB ((GPIO_TypeDef *) GPIOB_APB_BASE) -#define GPIOB_AHB ((GPIO_TypeDef *) GPIOB_AHB_BASE) -#define GPIOC_APB ((GPIO_TypeDef *) GPIOC_APB_BASE) -#define GPIOC_AHB ((GPIO_TypeDef *) GPIOC_AHB_BASE) -#define GPIOD_APB ((GPIO_TypeDef *) GPIOD_APB_BASE) -#define GPIOD_AHB ((GPIO_TypeDef *) GPIOD_AHB_BASE) -#define GPIOE_APB ((GPIO_TypeDef *) GPIOE_APB_BASE) -#define GPIOE_AHB ((GPIO_TypeDef *) GPIOE_AHB_BASE) -#define GPIOF_APB ((GPIO_TypeDef *) GPIOF_APB_BASE) -#define GPIOF_AHB ((GPIO_TypeDef *) GPIOF_AHB_BASE) -#define GPIOG_APB ((GPIO_TypeDef *) GPIOG_APB_BASE) -#define GPIOG_AHB ((GPIO_TypeDef *) GPIOG_AHB_BASE) -#define GPIOH_APB ((GPIO_TypeDef *) GPIOH_APB_BASE) -#define GPIOH_AHB ((GPIO_TypeDef *) GPIOH_AHB_BASE) -#define GPIOJ_APB ((GPIO_TypeDef *) GPIOJ_APB_BASE) -#define GPIOJ_AHB ((GPIO_TypeDef *) GPIOJ_AHB_BASE) -#define GPIOK_AHB ((GPIO_TypeDef *) GPIOK_AHB_BASE) -#define GPIOL_AHB ((GPIO_TypeDef *) GPIOL_AHB_BASE) -#define GPIOM_AHB ((GPIO_TypeDef *) GPIOM_AHB_BASE) -#define GPION_AHB ((GPIO_TypeDef *) GPION_AHB_BASE) -#define GPIOP_AHB ((GPIO_TypeDef *) GPIOP_AHB_BASE) -#define GPIOQ_AHB ((GPIO_TypeDef *) GPIOQ_AHB_BASE) -#define GPT0 ((GPT_TypeDef *) GPT0_BASE) -#define GPT1 ((GPT_TypeDef *) GPT1_BASE) -#define GPT2 ((GPT_TypeDef *) GPT2_BASE) -#define GPT3 ((GPT_TypeDef *) GPT3_BASE) -#define GPT4 ((GPT_TypeDef *) GPT4_BASE) -#define GPT5 ((GPT_TypeDef *) GPT5_BASE) -#define WGPT0 ((GPT_TypeDef *) WGPT0_BASE) -#define WGPT1 ((GPT_TypeDef *) WGPT1_BASE) -#define WGPT2 ((GPT_TypeDef *) WGPT2_BASE) -#define WGPT3 ((GPT_TypeDef *) WGPT3_BASE) -#define WGPT4 ((GPT_TypeDef *) WGPT4_BASE) -#define WGPT5 ((GPT_TypeDef *) WGPT5_BASE) -#define WDT0 ((WDT_TypeDef *) WDT0_BASE) -#define WDT1 ((WDT_TypeDef *) WDT1_BASE) -#define ADC0 ((ADC_TypeDef*) ADC0_BASE) -#define ADC1 ((ADC_TypeDef*) ADC1_BASE) -#define UART0 ((UART_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define UART3 ((UART_TypeDef *) UART3_BASE) -#define UART4 ((UART_TypeDef *) UART4_BASE) -#define UART5 ((UART_TypeDef *) UART5_BASE) -#define UART6 ((UART_TypeDef *) UART6_BASE) -#define UART7 ((UART_TypeDef *) UART7_BASE) -#define SSI0 ((SSI_TypeDef *) SSI0_BASE) -#define SSI1 ((SSI_TypeDef *) SSI1_BASE) -#define SSI2 ((SSI_TypeDef *) SSI2_BASE) -#define SSI3 ((SSI_TypeDef *) SSI3_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define I2C4 ((I2C_TypeDef *) I2C4_BASE) -#define I2C5 ((I2C_TypeDef *) I2C5_BASE) -#define CAN0 ((CAN_TypeDef *) CAN0_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -// usb -#define ACMP ((ACMP_TypeDef *) ACMP_BASE) -#define PWM0 ((PWM_TypeDef *) PWM0_BASE) -#define PWM1 ((PWM_TypeDef *) PWM1_BASE) -#define QEI0 ((QEI_TypeDef *) QEI0_BASE) -#define QEI1 ((QEI_TypeDef *) QEI1_BASE) - -/** - * @} - */ - -#endif /* __TM4C123x_H */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c deleted file mode 100644 index 60d6763..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/TM4C129x/hal_lld.c - * @brief TM4C129x HAL Driver subsystem low level driver source. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * - * @notapi - */ -void hal_lld_init(void) -{ -} - -/** - * @brief TM4C129x clocks and PLL initialization. - * @note All the involved constants come from the file @p board.h and - * @p mcuconf.h. - * @note This function should be invoked just after the system reset. - * - * @special - */ -void tiva_clock_init(void) -{ - uint32_t moscctl, rsclkcfg; - - /* - * 1. Once POR has completed, the PIOSC is acting as the system clock. - */ - - /* - * 2. Power up the MOSC by clearing the NOXTAL bit in the MOSCCTL register. - */ - moscctl = SYSCTL->MOSCCTL; - moscctl &= ~MOSCCTL_NOXTAL; - - /* - * 3. If single-ended MOSC mode is required, the MOSC is ready to use. If crystal mode is required, - * clear the PWRDN bit and wait for the MOSCPUPRIS bit to be set in the Raw Interrupt Status - * (RIS), indicating MOSC crystal mode is ready. - */ -#if TIVA_MOSC_SINGLE_ENDED - SYSCTL->MOSCCTL = moscctl; -#else - moscctl &= ~MOSCCTL_PWRDN; - SYSCTL->MOSCCTL = moscctl; - - while (!(SYSCTL->RIS & SYSCTL_RIS_MOSCPUPRIS)); -#endif - - /* - * 4. Set the OSCSRC field to 0x3 in the RSCLKCFG register at offset 0x0B0. - */ - rsclkcfg = SYSCTL->RSCLKCFG; - - rsclkcfg |= TIVA_RSCLKCFG_OSCSRC; - - /* - * 5. If the application also requires the MOSC to be the deep-sleep clock source, then program the - * DSOSCSRC field in the DSCLKCFG register to 0x3. - */ - - /* - * 6. Write the PLLFREQ0 and PLLFREQ1 registers with the values of Q, N, MINT, and MFRAC to - * the configure the desired VCO frequency setting. - */ - SYSCTL->PLLFREQ1 = (0x04 << 0); // 5 - 1 - SYSCTL->PLLFREQ0 = (0x60 << 0) | PLLFREQ0_PLLPWR; - - /* - * 7. Write the MEMTIM0 register to correspond to the new system clock setting. - */ - SYSCTL->MEMTIM0 = (MEMTIM0_FBCHT_3_5 | MEMTIM0_FWS_5 | MEMTIM0_EBCHT_3_5 | MEMTIM0_EWS_5 | MEMTIM0_MB1); - - /* - * Wait for the PLLSTAT register to indicate the PLL has reached lock at the new operating point - * (or that a timeout period has passed and lock has failed, in which case an error condition exists - * and this sequence is abandoned and error processing is initiated). - */ - while (!SYSCTL->PLLSTAT & PLLSTAT_LOCK); - - /* - * 9. Write the RSCLKCFG register's PSYSDIV value, set the USEPLL bit to enabled, and MEMTIMU - * bit. - */ - - rsclkcfg = SYSCTL->RSCLKCFG; - - rsclkcfg |= (RSCLKCFG_USEPLL | (0x03 << 0) | (0x03 << 20) | (0x03 << 24)); - - //rsclkcfg |= ((0x03 << 0) | (1 << 28) | (0x03 << 20)); - - rsclkcfg |= RSCLKCFG_MEMTIMU; - - // set new configuration - SYSCTL->RSCLKCFG = rsclkcfg; - -#if HAL_USE_PWM -#if TIVA_PWM_USE_PWM0 - PWM0->CC = TIVA_PWM_FIELDS; -#endif -#endif -} - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h deleted file mode 100644 index e5c667d..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h +++ /dev/null @@ -1,376 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/TM4C129x/hal_lld.h - * @brief TM4C129x HAL subsystem low level driver header. - * @pre This module requires the following macros to be defined in the - * @p board.h file: - * - TODO: add required macros - * - * @addtogroup HAL - * @{ - */ - -#ifndef HAL_LLD_H -#define HAL_LLD_H - -#include "tiva_registry.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name Platform identification - * @{ - */ - -#define PLATFORM_NAME "Tiva C Series TM4C129x" - -/** - * @} - */ - -/** - * @name RIS register bits definitions - * @{ - */ - -#define SYSCTL_RIS_PLLLRIS (1 << 6) -#define SYSCTL_RIS_MOSCPUPRIS (1 << 8) - -/** - * @} - */ - -/** - * @name MOSCCTL register bits definitions - * @{ - */ - -#define MOSCCTL_CVAL (1 << 0) -#define MOSCCTL_MOSCIM (1 << 1) -#define MOSCCTL_NOXTAL (1 << 2) -#define MOSCCTL_PWRDN (1 << 3) -#define MOSCCTL_OSCRNG (1 << 4) - -/** - * @} - */ - -/** - * @name RSCLKCFG register bits definitions - * @{ - */ - -#define RSCLKCFG_PSYSDIV_bm (0xfffff << 0) -#define RSCLKCFG_OSYSDIV_bm (0xfffff << 10 - -#define RSCLKCFG_OSCSRC_bm (0xff << 20) -#define RSCLKCFG_OSCSRC_PIOSC (0 << 20) -#define RSCLKCFG_OSCSRC_LFIOSC (0x02 << 20) -#define RSCLKCFG_OSCSRC_MOSC (0x03 << 20) -#define RSCLKCFG_OSCSRC_RTCOSC (0x04 << 20) - -#define RSCLKCFG_PLLSRC_bm (0xff << 24) -#define RSCLKCFG_PLLSRC_PIOSC (0 << 24) -#define RSCLKCFG_PLLSRC_MOSC (0x03 << 24) - -#define RSCLKCFG_USEPLL (1 << 28) - -#define RSCLKCFG_ACG (1 << 29) - -#define RSCLKCFG_NEWFREQ (1 << 30) - -#define RSCLKCFG_MEMTIMU (1 << 31) - -/** - * @} - */ - -/** - * @name PLLFREQ0 register bits definitions - * The PLL frequency can be calculated using the following equation: - * fVCO = (fIN * MDIV) - * where - * fIN = fXTAL/(Q+1)(N+1) or fPIOSC/(Q+1)(N+1) - * MDIV = MINT + (MFRAC / 1024) - * The Q and N values are programmed in the PLLFREQ1 register. Note that to reduce jitter, MFRAC - * should be programmed to 0x0. - * @{ - */ - -#define PLLFREQ0_MINT_bm (0xfffff << 0) -#define PLLFREQ0_MFRAC_bm (0xfffff << 10) -#define PLLFREQ0_PLLPWR (1 << 23) - -/** - * @} - */ - -/** - * @name PLLFREQ1 register bits definitions - * @{ - */ - -#define PLLFREQ1_N_bm (0x7ff << 0) -#define PLLFREQ1_Q_bm (0x7ff << 8) - -/** - * @} - */ - -/** - * @name MEMTIM0 register bits definitions - * @{ - */ - -#define MEMTIM0_FWS_bm (0xff << 0) -#define MEMTIM0_FWS_0 (0x00 << 0) -#define MEMTIM0_FWS_1 (0x01 << 0) -#define MEMTIM0_FWS_2 (0x02 << 0) -#define MEMTIM0_FWS_3 (0x03 << 0) -#define MEMTIM0_FWS_4 (0x04 << 0) -#define MEMTIM0_FWS_5 (0x05 << 0) -#define MEMTIM0_FWS_6 (0x06 << 0) -#define MEMTIM0_FWS_7 (0x07 << 0) - -#define MEMTIM0_FBCE (1 << 5) - -#define MEMTIM0_FBCHT_bm (0xff << 6) -#define MEMTIM0_FBCHT_0_5 (0x00 << 6) -#define MEMTIM0_FBCHT_1 (0x01 << 6) -#define MEMTIM0_FBCHT_1_5 (0x02 << 6) -#define MEMTIM0_FBCHT_2 (0x03 << 6) -#define MEMTIM0_FBCHT_2_5 (0x04 << 6) -#define MEMTIM0_FBCHT_3 (0x05 << 6) -#define MEMTIM0_FBCHT_3_5 (0x06 << 6) -#define MEMTIM0_FBCHT_4 (0x07 << 6) -#define MEMTIM0_FBCHT_4_5 (0x08 << 6) - -#define MEMTIM0_EWS_bm (0xff << 16) -#define MEMTIM0_EWS_0 (0x00 << 16) -#define MEMTIM0_EWS_1 (0x01 << 16) -#define MEMTIM0_EWS_2 (0x02 << 16) -#define MEMTIM0_EWS_3 (0x03 << 16) -#define MEMTIM0_EWS_4 (0x04 << 16) -#define MEMTIM0_EWS_5 (0x05 << 16) -#define MEMTIM0_EWS_6 (0x06 << 16) -#define MEMTIM0_EWS_7 (0x07 << 16) - -#define MEMTIM0_EBCE (1 << 21) - -#define MEMTIM0_EBCHT_bm (0xff << 22) -#define MEMTIM0_EBCHT_0_5 (0x00 << 22) -#define MEMTIM0_EBCHT_1 (0x01 << 22) -#define MEMTIM0_EBCHT_1_5 (0x02 << 22) -#define MEMTIM0_EBCHT_2 (0x03 << 22) -#define MEMTIM0_EBCHT_2_5 (0x04 << 22) -#define MEMTIM0_EBCHT_3 (0x05 << 22) -#define MEMTIM0_EBCHT_3_5 (0x06 << 22) -#define MEMTIM0_EBCHT_4 (0x07 << 22) -#define MEMTIM0_EBCHT_4_5 (0x08 << 22) - -// XXX: what is this? -#define MEMTIM0_MB1 0x00100010 // MB1 = Must be one - -/** - * @} - */ - -/** - * @name PLLSTAT register bits definitions - * @{ - */ - -#define PLLSTAT_LOCK (1 << 0) - -/** - * @} - */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -#if !defined(TIVA_MOSC_SINGLE_ENDED) -#define TIVA_MOSC_SINGLE_ENDED FALSE -#endif - -#if !defined(TIVA_RSCLKCFG_OSCSRC) -#define TIVA_RSCLKCFG_OSCSRC RSCLKCFG_OSCSRC_MOSC -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/* - * Configuration-related checks. - */ -#if !defined(TM4C129x_MCUCONF) -#error "Using a wrong mcuconf.h file, TM4C129x_MCUCONF not defined" -#endif - -/* - * Oscillator-related checks. - */ -#if !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_PIOSC) && \ - !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_LFIOSC) && \ - !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_MOSC) && \ - !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_RTCOSC) -#error "Invalid value for TIVA_RSCLKCFG_OSCSRC defined" -#endif - -#if TIVA_XTAL_VALUE == 4000000 -#define TIVA_XTAL_ (0x06 << 6) -#elif TIVA_XTAL_VALUE == 4096000 -#define TIVA_XTAL_ (0x07 << 6) -#elif TIVA_XTAL_VALUE == 4915200 -#define TIVA_XTAL_ (0x08 << 6) -#elif TIVA_XTAL_VALUE == 5000000 -#define TIVA_XTAL_ (0x09 << 6) -#elif TIVA_XTAL_VALUE == 5120000 -#define TIVA_XTAL_ (0x0a << 6) -#elif TIVA_XTAL_VALUE == 6000000 -#define TIVA_XTAL_ (0x0b << 6) -#elif TIVA_XTAL_VALUE == 6144000 -#define TIVA_XTAL_ (0x0c << 6) -#elif TIVA_XTAL_VALUE == 7372800 -#define TIVA_XTAL_ (0x0d << 6) -#elif TIVA_XTAL_VALUE == 8000000 -#define TIVA_XTAL_ (0x0e << 6) -#elif TIVA_XTAL_VALUE == 8192000 -#define TIVA_XTAL_ (0x0f << 6) -#elif TIVA_XTAL_VALUE == 10000000 -#define TIVA_XTAL_ (0x10 << 6) -#elif TIVA_XTAL_VALUE == 12000000 -#define TIVA_XTAL_ (0x11 << 6) -#elif TIVA_XTAL_VALUE == 12288000 -#define TIVA_XTAL_ (0x12 << 6) -#elif TIVA_XTAL_VALUE == 13560000 -#define TIVA_XTAL_ (0x13 << 6) -#elif TIVA_XTAL_VALUE == 14318180 -#define TIVA_XTAL_ (0x14 << 6) -#elif TIVA_XTAL_VALUE == 16000000 -#define TIVA_XTAL_ (0x15 << 6) -#elif TIVA_XTAL_VALUE == 16384000 -#define TIVA_XTAL_ (0x16 << 6) -#elif TIVA_XTAL_VALUE == 18000000 -#define TIVA_XTAL_ (0x17 << 6) -#elif TIVA_XTAL_VALUE == 20000000 -#define TIVA_XTAL_ (0x18 << 6) -#elif TIVA_XTAL_VALUE == 24000000 -#define TIVA_XTAL_ (0x19 << 6) -#elif TIVA_XTAL_VALUE == 25000000 -#define TIVA_XTAL_ (0x1a << 6) -#else -#error "Invalid value for TIVA_XTAL_VALUE defined" -#endif - -/* -#if TIVA_MOSC_ENABLE == TRUE -#define TIVA_MOSCDIS (0 << 0) -#define TIVA_XTAL TIVA_XTAL_ -#elif TIVA_MOSC_ENABLE == FALSE -#define TIVA_MOSCDIS (1 << 0) -#define TIVA_XTAL 0 -#else -#error "Invalid value for TIVA_MOSC_ENABLE defined" -#endif - -#if TIVA_DIV400_ENABLE == TRUE -#define TIVA_DIV400 (1 << 30) -#elif TIVA_DIV400_ENABLE == FALSE -#define TIVA_DIV400 (0 << 30) -#else -#error "Invalid value for TIVA_DIV400_ENABLE defined" -#endif - -#if (TIVA_SYSDIV_VALUE >= 0x02) && (TIVA_SYSDIV_VALUE <= 0x3f) -#define TIVA_SYSDIV (TIVA_SYSDIV_VALUE << 23) -#define TIVA_SYSDIV2 (TIVA_SYSDIV_VALUE << 23) -#else -#error "Invalid value for TIVA_SYSDIV_VALUE defined" -#endif - -#if TIVA_USESYSDIV_ENABLE == TRUE -#define TIVA_USESYSDIV (1 << 22) -#elif TIVA_USESYSDIV_ENABLE == FALSE -#define TIVA_USESYSDIV (0 << 22) -#else -#error "Invalid value for TIVA_USESYSDIV_ENABLE defined" -#endif - -#if TIVA_SYSDIV2LSB_ENABLE == TRUE -#define TIVA_SYSDIV2LSB (1 << 22) -#elif TIVA_SYSDIV2LSB_ENABLE == FALSE -#define TIVA_SYSDIV2LSB (0 << 22) -#else -#error "Invalid value for TIVA_SYSDIV2LSB_ENABLE defined" -#endif - -#if TIVA_BYPASS_ENABLE == TRUE -#define TIVA_SRC 16000000 -#define TIVA_BYPASS (1 << 11) -#elif TIVA_BYPASS_ENABLE == FALSE -#define TIVA_SRC (200000000 + ((TIVA_DIV400 >> 30) * 200000000)) -#define TIVA_BYPASS (0 << 11) -#else -#error "Invalid value for TIVA_BYPASS_ENABLE defined" -#endif - -#if (TIVA_OSCSRC == TIVA_RCC_OSCSRC_MOSC) && (TIVA_MOSC_ENABLE == FALSE) -#error "Main Oscillator selected but not enabled" -#endif -*/ -/* - * System Clock calculation - * TODO: dynamic TIVA_SYSCLK value - */ -#define TIVA_SYSCLK 120000000 - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/* Various helpers.*/ -#include "nvic.h" -#include "tiva_isr.h" - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); - void tiva_clock_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_LLD_H */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/platform.mk deleted file mode 100644 index b8363f3..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/platform.mk +++ /dev/null @@ -1,14 +0,0 @@ -# List of all the TM4C129x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C129x/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_mac_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_wdg_lld.c - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C129x \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h deleted file mode 100644 index 255bfd6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h +++ /dev/null @@ -1,569 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TM4C129x/tiva_isr.h - * @brief TM4C129x ISR remapper driver header. - * - * @addtogroup TM4C129x_ISR - * @{ - */ - -#ifndef _TIVA_ISR_H_ -#define _TIVA_ISR_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name ISR names and numbers remapping - * @{ - */ - -/* GPIO units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1292NCPDT) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C129CNCPDT) || defined(TM4C129DNCPDT)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 -#define TIVA_GPIOG_HANDLER VectorBC -#define TIVA_GPIOH_HANDLER VectorC0 -#define TIVA_GPIOJ_HANDLER Vector10C -#define TIVA_GPIOK_HANDLER Vector110 -#define TIVA_GPIOL_HANDLER Vector114 -#define TIVA_GPIOM_HANDLER Vector160 -#define TIVA_GPION_HANDLER Vector164 -#define TIVA_GPIOP0_HANDLER Vector170 -#define TIVA_GPIOP1_HANDLER Vector174 -#define TIVA_GPIOP2_HANDLER Vector178 -#define TIVA_GPIOP3_HANDLER Vector17C -#define TIVA_GPIOP4_HANDLER Vector180 -#define TIVA_GPIOP5_HANDLER Vector184 -#define TIVA_GPIOP6_HANDLER Vector188 -#define TIVA_GPIOP7_HANDLER Vector18C -#define TIVA_GPIOQ0_HANDLER Vector190 -#define TIVA_GPIOQ1_HANDLER Vector194 -#define TIVA_GPIOQ2_HANDLER Vector198 -#define TIVA_GPIOQ3_HANDLER Vector19C -#define TIVA_GPIOQ4_HANDLER Vector1A0 -#define TIVA_GPIOQ5_HANDLER Vector1A4 -#define TIVA_GPIOQ6_HANDLER Vector1A8 -#define TIVA_GPIOQ7_HANDLER Vector1AC - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#define TIVA_GPIOG_NUMBER 31 -#define TIVA_GPIOH_NUMBER 32 -#define TIVA_GPIOJ_NUMBER 51 -#define TIVA_GPIOK_NUMBER 52 -#define TIVA_GPIOL_NUMBER 53 -#define TIVA_GPIOM_NUMBER 72 -#define TIVA_GPION_NUMBER 73 -#define TIVA_GPIOP0_NUMBER 76 -#define TIVA_GPIOP1_NUMBER 77 -#define TIVA_GPIOP2_NUMBER 78 -#define TIVA_GPIOP3_NUMBER 79 -#define TIVA_GPIOP4_NUMBER 80 -#define TIVA_GPIOP5_NUMBER 81 -#define TIVA_GPIOP6_NUMBER 82 -#define TIVA_GPIOP7_NUMBER 83 -#define TIVA_GPIOQ0_NUMBER 84 -#define TIVA_GPIOQ1_NUMBER 85 -#define TIVA_GPIOQ2_NUMBER 86 -#define TIVA_GPIOQ3_NUMBER 87 -#define TIVA_GPIOQ4_NUMBER 88 -#define TIVA_GPIOQ5_NUMBER 89 -#define TIVA_GPIOQ6_NUMBER 90 -#define TIVA_GPIOQ7_NUMBER 91 -#endif -#if defined(TM4C1290NCZAD) || defined(TM4C1292NCZAD) || defined(TM4C1294NCZAD)\ - || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCZAD) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_GPIOA_HANDLER Vector40 -#define TIVA_GPIOB_HANDLER Vector44 -#define TIVA_GPIOC_HANDLER Vector48 -#define TIVA_GPIOD_HANDLER Vector4C -#define TIVA_GPIOE_HANDLER Vector50 -#define TIVA_GPIOF_HANDLER VectorB8 -#define TIVA_GPIOG_HANDLER VectorBC -#define TIVA_GPIOH_HANDLER VectorC0 -#define TIVA_GPIOJ_HANDLER Vector10C -#define TIVA_GPIOK_HANDLER Vector110 -#define TIVA_GPIOL_HANDLER Vector114 -#define TIVA_GPIOM_HANDLER Vector160 -#define TIVA_GPION_HANDLER Vector164 -#define TIVA_GPIOP0_HANDLER Vector170 -#define TIVA_GPIOP1_HANDLER Vector174 -#define TIVA_GPIOP2_HANDLER Vector178 -#define TIVA_GPIOP3_HANDLER Vector17C -#define TIVA_GPIOP4_HANDLER Vector180 -#define TIVA_GPIOP5_HANDLER Vector184 -#define TIVA_GPIOP6_HANDLER Vector188 -#define TIVA_GPIOP7_HANDLER Vector18C -#define TIVA_GPIOQ0_HANDLER Vector190 -#define TIVA_GPIOQ1_HANDLER Vector194 -#define TIVA_GPIOQ2_HANDLER Vector198 -#define TIVA_GPIOQ3_HANDLER Vector19C -#define TIVA_GPIOQ4_HANDLER Vector1A0 -#define TIVA_GPIOQ5_HANDLER Vector1A4 -#define TIVA_GPIOQ6_HANDLER Vector1A8 -#define TIVA_GPIOQ7_HANDLER Vector1AC -#define TIVA_GPIOR_HANDLER Vector1B0 -#define TIVA_GPIOS_HANDLER Vector1B4 -#define TIVA_GPIOT_HANDLER Vector1FC - -#define TIVA_GPIOA_NUMBER 0 -#define TIVA_GPIOB_NUMBER 1 -#define TIVA_GPIOC_NUMBER 2 -#define TIVA_GPIOD_NUMBER 3 -#define TIVA_GPIOE_NUMBER 4 -#define TIVA_GPIOF_NUMBER 30 -#define TIVA_GPIOG_NUMBER 31 -#define TIVA_GPIOH_NUMBER 32 -#define TIVA_GPIOJ_NUMBER 51 -#define TIVA_GPIOK_NUMBER 52 -#define TIVA_GPIOL_NUMBER 53 -#define TIVA_GPIOM_NUMBER 72 -#define TIVA_GPION_NUMBER 73 -#define TIVA_GPIOP0_NUMBER 76 -#define TIVA_GPIOP1_NUMBER 77 -#define TIVA_GPIOP2_NUMBER 78 -#define TIVA_GPIOP3_NUMBER 79 -#define TIVA_GPIOP4_NUMBER 80 -#define TIVA_GPIOP5_NUMBER 81 -#define TIVA_GPIOP6_NUMBER 82 -#define TIVA_GPIOP7_NUMBER 83 -#define TIVA_GPIOQ0_NUMBER 84 -#define TIVA_GPIOQ1_NUMBER 85 -#define TIVA_GPIOQ2_NUMBER 86 -#define TIVA_GPIOQ3_NUMBER 87 -#define TIVA_GPIOQ4_NUMBER 88 -#define TIVA_GPIOQ5_NUMBER 89 -#define TIVA_GPIOQ6_NUMBER 90 -#define TIVA_GPIOQ7_NUMBER 91 -#define TIVA_GPIOR_NUMBER 92 -#define TIVA_GPIOS_NUMBER 93 -#define TIVA_GPIOT_NUMBER 111 -#endif - -/* EPI units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_EPI0_HANDLER Vector108 - -#define TIVA_EPI0_NUMBER 50 -#endif - -/* CRC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -/* CRC has no interrupts.*/ -#endif - -/* AES Accelerator units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) -/* no interrupts.*/ -#endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) \ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) -#define TIVA_AES_HANDLER Vector1BC - -#define TIVA_AES_NUMBER 95 -#endif - -/* DES Accelerator units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) -/* no interrupts.*/ -#endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) -#define TIVA_DES_HANDLER Vector1C0 - -#define TIVA_DES_NUMBER 51 -#endif - -/* SHA/MD5 Accelerator units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) -/* no interrupts.*/ -#endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) -#define TIVA_SHA_MD5_HANDLER Vector1B8 - -#define TIVA_SHA_MD5_NUMBER 94 -#endif - -/* GPT units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_GPT0A_HANDLER Vector8C -#define TIVA_GPT0B_HANDLER Vector90 -#define TIVA_GPT1A_HANDLER Vector94 -#define TIVA_GPT1B_HANDLER Vector98 -#define TIVA_GPT2A_HANDLER Vector9C -#define TIVA_GPT2B_HANDLER VectorA0 -#define TIVA_GPT3A_HANDLER VectorCC -#define TIVA_GPT3B_HANDLER VectorD0 -#define TIVA_GPT4A_HANDLER Vector13C -#define TIVA_GPT4B_HANDLER Vector140 -#define TIVA_GPT5A_HANDLER Vector144 -#define TIVA_GPT5B_HANDLER Vector148 -#define TIVA_GPT6A_HANDLER Vector1C8 -#define TIVA_GPT6B_HANDLER Vector1CC -#define TIVA_GPT7A_HANDLER Vector1D0 -#define TIVA_GPT7B_HANDLER Vector1D4 - -#define TIVA_GPT0A_NUMBER 19 -#define TIVA_GPT0B_NUMBER 20 -#define TIVA_GPT1A_NUMBER 21 -#define TIVA_GPT1B_NUMBER 22 -#define TIVA_GPT2A_NUMBER 23 -#define TIVA_GPT2B_NUMBER 24 -#define TIVA_GPT3A_NUMBER 35 -#define TIVA_GPT3B_NUMBER 36 -#define TIVA_GPT4A_NUMBER 63 -#define TIVA_GPT4B_NUMBER 64 -#define TIVA_GPT5A_NUMBER 65 -#define TIVA_GPT5B_NUMBER 66 -#define TIVA_GPT6A_NUMBER 98 -#define TIVA_GPT6B_NUMBER 99 -#define TIVA_GPT7A_NUMBER 100 -#define TIVA_GPT7B_NUMBER 101 -#endif - -/* WDT units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_WDT_HANDLER Vector88 - -#define TIVA_WDT_NUMBER 18 -#endif - -/* ADC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_ADC0_SEQ0_HANDLER Vector78 -#define TIVA_ADC0_SEQ1_HANDLER Vector7C -#define TIVA_ADC0_SEQ2_HANDLER Vector80 -#define TIVA_ADC0_SEQ3_HANDLER Vector84 -#define TIVA_ADC1_SEQ0_HANDLER VectorF8 -#define TIVA_ADC1_SEQ1_HANDLER VectorFC -#define TIVA_ADC1_SEQ2_HANDLER Vector100 -#define TIVA_ADC1_SEQ3_HANDLER Vector104 - -#define TIVA_ADC0_SEQ0_NUMBER 14 -#define TIVA_ADC0_SEQ1_NUMBER 15 -#define TIVA_ADC0_SEQ2_NUMBER 16 -#define TIVA_ADC0_SEQ3_NUMBER 17 -#define TIVA_ADC1_SEQ0_NUMBER 46 -#define TIVA_ADC1_SEQ1_NUMBER 47 -#define TIVA_ADC1_SEQ2_NUMBER 48 -#define TIVA_ADC1_SEQ3_NUMBER 49 -#endif - -/* UART units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_UART0_HANDLER Vector54 -#define TIVA_UART1_HANDLER Vector58 -#define TIVA_UART2_HANDLER VectorC4 -#define TIVA_UART3_HANDLER Vector120 -#define TIVA_UART4_HANDLER Vector124 -#define TIVA_UART5_HANDLER Vector128 -#define TIVA_UART6_HANDLER Vector12C -#define TIVA_UART7_HANDLER Vector130 - -#define TIVA_UART0_NUMBER 5 -#define TIVA_UART1_NUMBER 6 -#define TIVA_UART2_NUMBER 33 -#define TIVA_UART3_NUMBER 56 -#define TIVA_UART4_NUMBER 57 -#define TIVA_UART5_NUMBER 58 -#define TIVA_UART6_NUMBER 59 -#define TIVA_UART7_NUMBER 60 -#endif - -/* QSSI units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_QSSI0_HANDLER Vector5C -#define TIVA_QSSI1_HANDLER VectorC8 -#define TIVA_QSSI2_HANDLER Vector118 -#define TIVA_QSSI3_HANDLER Vector11C - -#define TIVA_QSSI0_NUMBER 7 -#define TIVA_QSSI1_NUMBER 34 -#define TIVA_QSSI2_NUMBER 54 -#define TIVA_QSSI3_NUMBER 55 -#endif - -/* I2C units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_I2C0_HANDLER Vector60 -#define TIVA_I2C1_HANDLER VectorD4 -#define TIVA_I2C2_HANDLER Vector134 -#define TIVA_I2C3_HANDLER Vector138 -#define TIVA_I2C4_HANDLER Vector158 -#define TIVA_I2C5_HANDLER Vector15C -#define TIVA_I2C6_HANDLER Vector1D8 -#define TIVA_I2C7_HANDLER Vector1DC -#define TIVA_I2C8_HANDLER Vector1F4 -#define TIVA_I2C9_HANDLER Vector1F8 - -#define TIVA_I2C0_NUMBER 8 -#define TIVA_I2C1_NUMBER 37 -#define TIVA_I2C2_NUMBER 61 -#define TIVA_I2C3_NUMBER 62 -#define TIVA_I2C4_NUMBER 70 -#define TIVA_I2C5_NUMBER 71 -#define TIVA_I2C6_NUMBER 102 -#define TIVA_I2C7_NUMBER 103 -#define TIVA_I2C8_NUMBER 109 -#define TIVA_I2C9_NUMBER 110 -#endif - -/* 1-Wire Master units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) -#define TIVA_HAS_1WIRE FALSE -#endif -#if defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_1WIRE_HANDLER Vector1E4 - -#define TIVA_1WIRE_NUMBER 105 -#endif - -/* CAN units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_CAN0_HANDLER VectorD8 -#define TIVA_CAN1_HANDLER VectorDC - -#define TIVA_CAN0_NUMBER 38 -#define TIVA_CAN1_NUMBER 39 -#endif - -/* Ethernet MAC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1297NCZAD)\ - || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) -/* no interrupts.*/ -#endif -#if defined(TM4C1292NCPDT) || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_MAC_HANDLER VectorE0 - -#define TIVA_MAC_NUMBER 40 -#endif - -/* Ethernet PHY units.*/ -#if defined(TM4C1290NCPDT)|| defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT) \ - || defined(TM4C1292NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) -/* no interrupts.*/ -#endif -#if defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD)\ - || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -/* no interrupts.*/ -#endif - -/* USB units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_USB0_HANDLER VectorE8 - -#define TIVA_USB0_NUMBER 42 -#endif - -/* LCD units.*/ -#if defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C129DNCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_LCD_HANDLER Vector1C4 - -#define TIVA_LCD_NUMBER 97 -#endif -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) -/* no interrupts.*/ -#endif - -/* AC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_AC0_HANDLER VectorA4 -#define TIVA_AC1_HANDLER VectorA8 -#define TIVA_AC2_HANDLER VectorAC - -#define TIVA_AC0_NUMBER 25 -#define TIVA_AC1_NUMBER 26 -#define TIVA_AC2_NUMBER 27 -#endif - -/* PWM units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_PWM0FAULT_HANDLER Vector64 -#define TIVA_PWM0GEN0_HANDLER Vector68 -#define TIVA_PWM0GEN1_HANDLER Vector6C -#define TIVA_PWM0GEN2_HANDLER Vector70 -#define TIVA_PWM0GEN3_HANDLER VectorEC - -#define TIVA_PWM0FAULT_NUMBER 9 -#define TIVA_PWM0GEN0_NUMBER 10 -#define TIVA_PWM0GEN1_NUMBER 11 -#define TIVA_PWM0GEN2_NUMBER 12 -#define TIVA_PWM0GEN3_NUMBER 43 -#endif - -/* QEI units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_QEI0_HANLDER Vector74 - -#define TIVA_QEI0_NUMBER 13 -#endif - -/** - * @} - */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#endif /* _TIVA_ISR_H_ */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h deleted file mode 100644 index 5815351..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h +++ /dev/null @@ -1,368 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TM4C129x/tiva_registry.h - * @brief TM4C123x capabilities registry. - * - * @addtogroup HAL - * @{ - */ - -#ifndef _TIVA_REGISTRY_H_ -#define _TIVA_REGISTRY_H_ - -/*===========================================================================*/ -/* Platform capabilities. */ -/*===========================================================================*/ - -/** - * @name TM4C129x capabilities - * @{ - */ - -/* GPIO attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1292NCPDT) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C129CNCPDT) || defined(TM4C129DNCPDT)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG TRUE -#define TIVA_HAS_GPIOH TRUE -#define TIVA_HAS_GPIOJ TRUE -#define TIVA_HAS_GPIOK TRUE -#define TIVA_HAS_GPIOL TRUE -#define TIVA_HAS_GPIOM TRUE -#define TIVA_HAS_GPION TRUE -#define TIVA_HAS_GPIOP TRUE -#define TIVA_HAS_GPIOQ TRUE -#define TIVA_HAS_GPIOR FALSE -#define TIVA_HAS_GPIOS FALSE -#define TIVA_HAS_GPIOT FALSE -#endif -#if defined(TM4C1290NCZAD) || defined(TM4C1292NCZAD) || defined(TM4C1294NCZAD)\ - || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCZAD) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_GPIOA TRUE -#define TIVA_HAS_GPIOB TRUE -#define TIVA_HAS_GPIOC TRUE -#define TIVA_HAS_GPIOD TRUE -#define TIVA_HAS_GPIOE TRUE -#define TIVA_HAS_GPIOF TRUE -#define TIVA_HAS_GPIOG TRUE -#define TIVA_HAS_GPIOH TRUE -#define TIVA_HAS_GPIOJ TRUE -#define TIVA_HAS_GPIOK TRUE -#define TIVA_HAS_GPIOL TRUE -#define TIVA_HAS_GPIOM TRUE -#define TIVA_HAS_GPION TRUE -#define TIVA_HAS_GPIOP TRUE -#define TIVA_HAS_GPIOQ TRUE -#define TIVA_HAS_GPIOR TRUE -#define TIVA_HAS_GPIOS TRUE -#define TIVA_HAS_GPIOT TRUE -#endif - -/* EPI attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_EPI0 TRUE -#endif - -/* CRC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_CRC0 TRUE -#endif - -/* AES Accelerator attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) -#define TIVA_HAS_AES FALSE -#endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) \ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) -#define TIVA_HAS_AES TRUE -#endif - -/* DES Accelerator attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) -#define TIVA_HAS_DES FALSE -#endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) -#define TIVA_HAS_DES TRUE -#endif - -/* SHA/MD5 Accelerator attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) -#define TIVA_HAS_SHA_MD5 FALSE -#endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) -#define TIVA_HAS_SHA_MD5 TRUE -#endif - -/* GPT attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_GPT0 TRUE -#define TIVA_HAS_GPT1 TRUE -#define TIVA_HAS_GPT2 TRUE -#define TIVA_HAS_GPT3 TRUE -#define TIVA_HAS_GPT4 TRUE -#define TIVA_HAS_GPT5 TRUE -#define TIVA_HAS_GPT6 TRUE -#define TIVA_HAS_GPT7 TRUE -#define TIVA_HAS_WGPT0 FALSE -#define TIVA_HAS_WGPT1 FALSE -#define TIVA_HAS_WGPT2 FALSE -#define TIVA_HAS_WGPT3 FALSE -#define TIVA_HAS_WGPT4 FALSE -#define TIVA_HAS_WGPT5 FALSE -#endif - -/* WDT attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_WDT0 TRUE -#define TIVA_HAS_WDT1 TRUE -#endif - -/* ADC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_ADC0 TRUE -#define TIVA_HAS_ADC1 TRUE -#endif - -/* UART attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_UART0 TRUE -#define TIVA_HAS_UART1 TRUE -#define TIVA_HAS_UART2 TRUE -#define TIVA_HAS_UART3 TRUE -#define TIVA_HAS_UART4 TRUE -#define TIVA_HAS_UART5 TRUE -#define TIVA_HAS_UART6 TRUE -#define TIVA_HAS_UART7 TRUE -#endif - -/* QSSI attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_QSSI0 TRUE -#define TIVA_HAS_QSSI1 TRUE -#define TIVA_HAS_QSSI2 TRUE -#define TIVA_HAS_QSSI3 TRUE -#endif - -/* I2C attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_I2C0 TRUE -#define TIVA_HAS_I2C1 TRUE -#define TIVA_HAS_I2C2 TRUE -#define TIVA_HAS_I2C3 TRUE -#define TIVA_HAS_I2C4 TRUE -#define TIVA_HAS_I2C5 TRUE -#define TIVA_HAS_I2C6 TRUE -#define TIVA_HAS_I2C7 TRUE -#define TIVA_HAS_I2C8 TRUE -#define TIVA_HAS_I2C9 TRUE -#endif - -/* 1-Wire Master attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) -#define TIVA_HAS_1WIRE FALSE -#endif -#if defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_1WIRE TRUE -#endif - -/* CAN attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_CAN0 TRUE -#define TIVA_HAS_CAN1 TRUE -#endif - -/* Ethernet MAC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1297NCZAD)\ - || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) -#define TIVA_HAS_ETHERNET_MAC FALSE -#endif -#if defined(TM4C1292NCPDT) || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_ETHERNET_MAC TRUE -#endif - -/* Ethernet PHY attributes.*/ -#if defined(TM4C1290NCPDT)|| defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT) \ - || defined(TM4C1292NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) -#define TIVA_HAS_ETHERNET_PHY FALSE -#endif -#if defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD)\ - || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_ETHERNET_PHY TRUE -#endif - -/* USB attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_USB0 TRUE -#endif - -/* LCD attributes.*/ -#if defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C129DNCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_LCD TRUE -#endif -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) -#define TIVA_HAS_LCD FALSE -#endif - -/* AC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_AC0 TRUE -#define TIVA_HAS_AC1 TRUE -#define TIVA_HAS_AC2 TRUE -#endif - -/* PWM attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_PWM0 TRUE -#define TIVA_HAS_PWM1 FALSE -#endif - -/* QEI attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) -#define TIVA_HAS_QEI0 TRUE -#define TIVA_HAS_QEI1 FALSE -#endif - -/** - * @} - */ - -#endif /* _TIVA_REGISTRY_H_ */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h b/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h deleted file mode 100644 index 5a5f4f2..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h +++ /dev/null @@ -1,1131 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @addtogroup CMSIS - * @{ - */ - -/** - * @addtogroup TM4C129x - * @{ - */ - -#ifndef __TM4C129x_H -#define __TM4C129x_H - -/** - * @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001 /**< Cortex-M4 Core Revision */ -#define __MPU_PRESENT 1 /**< MPU present */ -#define __NVIC_PRIO_BITS 3 /**< Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /**< Use different SysTick Config */ -#define __FPU_PRESENT 1 /**< FPU present */ - -/** - * @brief TM4C129x Interrupt Number Definitions - */ -typedef enum IRQn -{ - /* TODO: check interrupt numbers with tm4c129 device */ - /***** Cortex-M4 Processor Exceptions Numbers ******************************/ - NonMaskableInt_IRQn = -14, /**< Cortex-M4 Non-Maskable Interrupt */ - HardFault_IRQn = -13, /**< Cortex-M4 Hard Fault Interrupt */ - MemoryManagement_IRQn = -12, /**< Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /**< Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /**< Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /**< Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /**< Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -3, /**< Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /**< Cortex-M4 System Tick Interrupt */ - /***** TM4C129x Specific Interrupt Numbers *********************************/ - GPIOA_IRQn = 0, /**< GPIO Port A */ - GPIOB_IRQn = 1, /**< GPIO Port B */ - GPIOC_IRQn = 2, /**< GPIO Port C */ - GPIOD_IRQn = 3, /**< GPIO Port D */ - GPIOE_IRQn = 4, /**< GPIO Port E */ - UART0_IRQn = 5, /**< UART0 */ - UART1_IRQn = 6, /**< UART1 */ - SSI0_IRQn = 7, /**< SSI0 */ - I2C0_IRQn = 8, /**< I2C0 */ - PWM0FAULT_IRQn = 9, /**< PWM0 Fault */ - PWM0GEN0_IRQn = 10, /**< PWM0 Generator 0 */ - PWM0GEN1_IRQn = 11, /**< PWM0 Generator 1 */ - PWM0GEN2_IRQn = 12, /**< PWM0 Generator 2 */ - QEI0_IRQn = 13, /**< QEI0 */ - ADC0SEQ0_IRQn = 14, /**< ADC0 Sequence 0 */ - ADC0SEQ1_IRQn = 15, /**< ADC0 Sequence 1 */ - ADC0SEQ2_IRQn = 16, /**< ADC0 Sequence 2 */ - ADC0SEQ3_IRQn = 17, /**< ADC0 Sequence 3 */ - WATCHDOG_IRQn = 18, /**< Watchdog Timers 0 and 1 */ - TIMER0A_IRQn = 19, /**< 16/32-Bit Timer 0A */ - TIMER0B_IRQn = 20, /**< 16/32-Bit Timer 0B */ - TIMER1A_IRQn = 21, /**< 16/32-Bit Timer 1A */ - TIMER1B_IRQn = 22, /**< 16/32-Bit Timer 1B */ - TIMER2A_IRQn = 23, /**< 16/32-Bit Timer 2A */ - TIMER2B_IRQn = 24, /**< 16/32-Bit Timer 2B */ - ACOMP0_IRQn = 25, /**< Analog Comparator 0 */ - ACOMP1_IRQn = 26, /**< Analog Comparator 1 */ - SYSCON_IRQn = 28, /**< System Control */ - FMCEECON_IRQn = 29, /**< Flash Memory Control and EEPROM Control */ - GPIOF_IRQn = 30, /**< GPIO Port F */ - UART2_IRQn = 33, /**< UART2 */ - SSI1_IRQn = 34, /**< SSI1 */ - TIMER3A_IRQn = 35, /**< 16/32-Bit Timer 3A */ - TIMER3B_IRQn = 36, /**< 16/32-Bit Timer 3B */ - I2C1_IRQn = 37, /**< I2C1 */ - QEI1_IRQn = 38, /**< QEI1 */ - CAN0_IRQn = 39, /**< CAN0 */ - CAN1_IRQn = 40, /**< CAN1 */ - HIBMODULE_IRQn = 43, /**< Hibernation Module */ - USB_IRQn = 44, /**< USB */ - PWM0GEN3_IRQn = 45, /**< PWM0 Generator 3 */ - UDMASFW_IRQn = 46, /**< UDMA Software */ - UDMAERR_IRQn = 47, /**< UDMA Error */ - ADC1SEQ0_IRQn = 48, /**< ADC1 Sequence 0 */ - ADC1SEQ1_IRQn = 49, /**< ADC1 Sequence 1 */ - ADC1SEQ2_IRQn = 50, /**< ADC1 Sequence 2 */ - ADC1SEQ3_IRQn = 51, /**< ADC1 Sequence 3 */ - SSI2_IRQn = 57, /**< SSI2 */ - SSI3_IRQn = 58, /**< SSI3 */ - UART3_IRQn = 59, /**< UART3 */ - UART4_IRQn = 60, /**< UART4 */ - UART5_IRQn = 61, /**< UART5 */ - UART6_IRQn = 62, /**< UART6 */ - UART7_IRQn = 63, /**< UART7 */ - I2C2_IRQn = 68, /**< I2C2 */ - I2C3_IRQn = 69, /**< I2C3 */ - TIMER4A_IRQn = 70, /**< 16/32-Bit Timer 4A */ - TIMER4B_IRQn = 71, /**< 16/32-Bit Timer 4B */ - TIMER5A_IRQn = 92, /**< 16/32-Bit Timer 5A */ - TIMER5B_IRQn = 93, /**< 16/32-Bit Timer 5B */ - WTIMER0A_IRQn = 94, /**< 32/64-Bit Timer 0A */ - WTIMER0B_IRQn = 95, /**< 32/64-Bit Timer 0B */ - WTIMER1A_IRQn = 96, /**< 32/64-Bit Timer 1A */ - WTIMER1B_IRQn = 97, /**< 32/64-Bit Timer 1B */ - WTIMER2A_IRQn = 98, /**< 32/64-Bit Timer 2A */ - WTIMER2B_IRQn = 99, /**< 32/64-Bit Timer 2B */ - WTIMER3A_IRQn = 100, /**< 32/64-Bit Timer 3A */ - WTIMER3B_IRQn = 101, /**< 32/64-Bit Timer 3B */ - WTIMER4A_IRQn = 102, /**< 32/64-Bit Timer 4A */ - WTIMER4B_IRQn = 103, /**< 32/64-Bit Timer 4B */ - WTIMER5A_IRQn = 104, /**< 32/64-Bit Timer 5A */ - WTIMER5B_IRQn = 105, /**< 32/64-Bit Timer 5B */ - SYSEXCEPT_IRQn = 106, /**< System Exception (imprecise) */ - PWM1GEN0_IRQn = 134, /**< PWM1 Generator 0 */ - PWM1GEN1_IRQn = 135, /**< PWM1 Generator 1 */ - PWM1GEN2_IRQn = 136, /**< PWM1 Generator 2 */ - PWM1GEN3_IRQn = 137, /**< PWM1 Generator 3 */ - PWM1FAULT_IRQn = 138 /**< PWM1 Fault */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals.*/ -#include - -/** - * @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog Comparator - */ -typedef struct -{ - __IO uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t REFCTL; /**< Reference Voltage Control */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __I uint32_t STAT0; /**< Status 0 */ - __IO uint32_t CTL0; /**< Control 0 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t STAT1; /**< Status 1 */ - __IO uint32_t CTL1; /**< Control 1 */ - __I uint32_t _RESERVED3[990];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} ACMP_TypeDef; - -/** - * @brief Analog-to-Digital Converter - */ -typedef struct -{ - __IO uint32_t MUX; /**< Sample Sequence Input Multiplexer - Select */ - __IO uint32_t CTL; /**< Sample Sequence Control */ - __I uint32_t FIFO; /**< Sample Sequence Result FIFO */ - __I uint32_t FSTAT; /**< Sample Sequence FIFO Status */ - __IO uint32_t OP; /**< Sample Sequence Operation */ - __IO uint32_t DC; /**< Sample Sequence Digital Comparator - Select */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ -} ADC_SS_t; - -typedef struct -{ - __IO uint32_t ACTSS; /**< Active Sample Sequencer */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IM; /**< Interrupt Mask */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t OSTAT; /**< Overflow Status */ - __IO uint32_t EMUX; /**< Event Multiplexer Select */ - __IO uint32_t USTAT; /**< Underflow Status */ - __IO uint32_t TSSEL; /**< Trigger Source Select */ - __IO uint32_t SSPRI; /**< Sample Sequencer Priority */ - __IO uint32_t SPC; /**< Sample Phase Control */ - __IO uint32_t PSSI; /**< Processor Sample Sequence Initiate */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t SAC; /**< Sample Averaging Control */ - __IO uint32_t DCISC; /**< Digital Comparator Interrupt Status and - Clear */ - __IO uint32_t CTL; /**< Control */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - ADC_SS_t SS[4]; /**< Sample Sequence 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[784];/**< Reserved */ - __O uint32_t DCRIC; /**< Digital Comparator Reset Initial - Conditions */ - __I uint32_t _RESERVED3[63]; /**< Reserved */ - __IO uint32_t DCCTL[8]; /**< Digital Comparator Control 0 - 7 */ - __I uint32_t _RESERVED4[8]; /**< Reserved */ - __IO uint32_t DCCMP[8]; /**< Digital Comparator Range 0 - 7 */ - __I uint32_t _RESERVED5[88]; /**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __IO uint32_t PC; /**< Peripheral Configuration */ - __IO uint32_t CC; /**< Clock Configuration */ -} ADC_TypeDef; - -/** - * @brief Controller Area Network - */ -typedef struct -{ - __IO uint32_t CRQ; /**< Command Request */ - __IO uint32_t CMSK; /**< Command Mask */ - __IO uint32_t MSK[2]; /**< Mask 1 and 2 */ - __IO uint32_t ARB[2]; /**< Arbitration 1 and 2 */ - __IO uint32_t MCTL; /**< Message Control */ - __IO uint32_t DA[2]; /**< Data A1 and A2 */ - __IO uint32_t DB[2]; /**< Data B1 and B2 */ - __I uint32_t _RESERVED0[13]; /**< Reserved */ -} CAN_INTERFACE_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t STS; /**< Status */ - __I uint32_t ERR; /**< Error Counter */ - __IO uint32_t BIT; /**< Bit Timing */ - __I uint32_t INT; /**< Interrupt */ - __IO uint32_t TST; /**< Test */ - __IO uint32_t BRPE; /**< Baud Rate Prescaler Extension */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - CAN_INTERFACE_t IF[2]; /**< IF1 and IF2 */ - __I uint32_t _RESERVED1[8]; /**< Reserved */ - __I uint32_t TXRQ[2]; /**< Transmission Request 1 and 2 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t NWDA[2]; /**< New Data 1 and 2 */ - __I uint32_t _RESERVED3[6]; /**< Reserved */ - __I uint32_t MSGINT[2]; /**< Message 1 and 2 Interrupt Pending */ - __I uint32_t _RESERVED4[6]; /**< Reserved */ - __I uint32_t MSGVAL[2]; /**< Message 1 and 2 Valid */ -} CAN_TypeDef; - -/** - * @brief EEPROM Memory - */ -typedef struct -{ - __IO uint32_t EESIZE; /**< Size Information */ - __IO uint32_t EEBLOCK; /**< Current Block */ - __IO uint32_t EEOFFSET; /**< Current Offset */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t EERDWR; /**< Read-Write */ - __IO uint32_t EERDWRINC; /**< Read-Write with Increment */ - __IO uint32_t EEDONE; /**< Done Status */ - __IO uint32_t EESUPP; /**< Support Control and Status */ - __IO uint32_t EEUNLOCK; /**< Unlock */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t EEPROT; /**< Protection */ - __IO uint32_t EEPASS[3]; /**< Password */ - __IO uint32_t EEINT; /**< Interrupt */ - __I uint32_t _RESERVED2[3]; /**< Reserved */ - __IO uint32_t EEHIDE; /**< Block Hide */ - __I uint32_t _RESERVED3[11]; /**< Reserved */ - __IO uint32_t EEDBGME; /**< Debug Mass Erase */ - __I uint32_t _RESERVED4[975];/**< Reserved */ - __IO uint32_t EEPROMPP; /**< Peripheral Properties */ -} EEPROM_TypeDef; - -/** - * @brief Flash Memory - */ -typedef struct -{ - __IO uint32_t FMA; /**< Flash Memory Address */ - __IO uint32_t FMD; /**< Flash Memory Data */ - __IO uint32_t FMC; /**< Flash Memory Control */ - __I uint32_t FCRIS; /**< Flash Controller Raw Interrupt Status */ - __IO uint32_t FCIM; /**< Flash Controller Interrupt Mask */ - __IO uint32_t FCMISC; /**< Masked Interrupt Status and Clear */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ - __IO uint32_t FMC2; /**< Flash Memory Control 2 */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t FWBVAL; /**< Flash Write Buffer Valid */ - __I uint32_t _RESERVED2[51]; /**< Reserved */ - __IO uint32_t FWBN; /**< Flash Write Buffer n */ - __I uint32_t _RESERVED3[943];/**< Reserved */ - __I uint32_t FSIZE; /**< Flash Size */ - __I uint32_t SSIZE; /**< SRAM Size */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t ROMSWMAP; /**< ROM Software Map */ -} FLASH_TypeDef; - - - -/** - * @brief General Purpose Input/Outputs - */ -typedef struct -{ - union { - __IO uint32_t MASKED_ACCESS[256]; /**< Masked access of Data Register */ - struct { - __I uint32_t _RESERVED0[255]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ - }; - }; - __IO uint32_t DIR; /**< Direction */ - __IO uint32_t IS; /**< Interrupt Sense */ - __IO uint32_t IBE; /**< Interrupt Both Edges */ - __IO uint32_t IEV; /**< Interrupt Event */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t AFSEL; /**< Alternate Function Select */ - __I uint32_t _RESERVED1[55]; /**< Reserved */ - __IO uint32_t DR2R; /**< 2-mA Drive Select */ - __IO uint32_t DR4R; /**< 4-mA Drive Select */ - __IO uint32_t DR8R; /**< 8-mA Drive Select */ - __IO uint32_t ODR; /**< Open Drain Select */ - __IO uint32_t PUR; /**< Pull-Up Select */ - __IO uint32_t PDR; /**< Pull-Down Select */ - __IO uint32_t SLR; /**< Slew Rate Control Select */ - __IO uint32_t DEN; /**< Digital Enable */ - __IO uint32_t LOCK; /**< Lock */ - __IO uint32_t CR; /**< Commit */ - __IO uint32_t AMSEL; /**< Analog Mode Select */ - __IO uint32_t PCTL; /**< Port Control */ - __IO uint32_t ADCCTL; /**< ADC Control */ - __IO uint32_t DMACTL; /**< DMA Control */ - __IO uint32_t SI; /**< */ - __IO uint32_t DR12R; /**< */ - __IO uint32_t WAKEPEN; /**< */ - __IO uint32_t WAKELVL; /**< */ - __IO uint32_t WAKESTAT; /**< */ - __I uint32_t _RESERVED2[669];/**< */ - __I uint32_t PP; /**< */ - __IO uint32_t PC; /**< */ -} GPIO_TypeDef; - -/** - * @brief General Purpose Timer - */ -typedef struct -{ - __IO uint32_t CFG; /**< Configuration */ - __IO uint32_t TAMR; /**< Timer A Mode */ - __IO uint32_t TBMR; /**< Timer B Mode */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t SYNC; /**< Synchronize */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t IMR; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t TAILR; /**< Timer A Interval Load */ - __IO uint32_t TBILR; /**< Timer B Interval Load */ - __IO uint32_t TAMATCHR; /**< Timer A Match */ - __IO uint32_t TBMATCHR; /**< Timer B Match */ - __IO uint32_t TAPR; /**< Timer A Prescale */ - __IO uint32_t TBPR; /**< Timer B Prescale */ - __IO uint32_t TAPMR; /**< Timer A Prescale Match */ - __IO uint32_t TBPMR; /**< Timer B Prescale Match */ - __I uint32_t TAR; /**< Timer A */ - __I uint32_t TBR; /**< Timer B */ - __IO uint32_t TAV; /**< Timer A Value */ - __IO uint32_t TBV; /**< Timer B Value */ - __I uint32_t RTCPD; /**< RTC Predivide */ - __I uint32_t TAPS; /**< Timer A Prescale Snapshot */ - __I uint32_t TBPS; /**< Timer B Prescale Snapshot */ - __I uint32_t TAPV; /**< Timer A Prescale Value */ - __I uint32_t TBPV; /**< Timer B Prescale Value */ - __I uint32_t _RESERVED1[981];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} GPT_TypeDef; - -/** - * @brief Hibernation Module - */ -typedef struct -{ - __I uint32_t RTCC; /**< RTC Counter */ - __IO uint32_t RTCM0; /**< RTC Match 0 */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t RTCLD; /**< RTC Load */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __IO uint32_t IC; /**< Interrupt Clear */ - __IO uint32_t RTCT; /**< RTC Trim */ - __IO uint32_t RTCSS; /**< RTC Sub Seconds */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ -} HIB_TypeDef; - -/** - * @brief Inter-Integrated Circuit - */ -typedef struct -{ - __IO uint32_t MSA; /**< Master Slave Address */ - __IO uint32_t MCS; /**< Master Control/Status */ - __IO uint32_t MDR; /**< Master Data */ - __IO uint32_t MTPR; /**< Master Timer Period */ - __IO uint32_t MIMR; /**< Master Interrupt Mask */ - __I uint32_t MRIS; /**< Master Raw Interrupt Status */ - __IO uint32_t MMIS; /**< Master Masked Interrupt Status */ - __O uint32_t MICR; /**< Master Interrupt Clear */ - __IO uint32_t MCR; /**< Master Configuration */ - __IO uint32_t MCLKOCNT; /**< Master Clock Low Timeout Count */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __I uint32_t MBMON; /**< Master Bus Monitor */ - __IO uint32_t MCR2; /**< Master Configuration 2 */ - __I uint32_t _RESERVED1[497];/**< Reserved */ - __IO uint32_t SOAR; /**< Slave Own Address */ - __IO uint32_t SCSR; /**< Slave Control/Status */ - __IO uint32_t SDR; /**< Slave Data */ - __IO uint32_t SIMR; /**< Slave Interrupt Mask */ - __I uint32_t SRIS; /**< Slave Raw Interrupt Status */ - __I uint32_t SMIS; /**< Slave Masked Interrupt Status */ - __O uint32_t SICR; /**< Slave Interrupt Clear */ - __IO uint32_t SOAR2; /**< Slave Own Address 2 */ - __IO uint32_t SACKCTL; /**< Slave ACK Control */ - __I uint32_t _RESERVED2[487];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t PC; /**< Peripheral Configuration */ -} I2C_TypeDef; - -/* - * @brief Pulse Width Modulator - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t INTEN; /**< Interrupt and Trigger Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t COUNT; /**< Counter */ - __IO uint32_t CMP[2]; /**< Compare A, B */ - __IO uint32_t GEN[2]; /**< Generator A, B Control */ - __IO uint32_t DBCTL; /**< Dead-Band Control */ - __IO uint32_t DBRISE; /**< Dead-Band Rising-Edge Delay */ - __IO uint32_t DBFALL; /**< Dead-Band Falling-Edge Delay */ - __IO uint32_t FLTSRC[2]; /**< Fault Source 0, 1 */ - __IO uint32_t MINFLTPER; /**< Minimum Fault Period */ -} PWM_GENERATOR_T; - -typedef struct -{ - union { - __IO uint32_t SEN; /**< Fault Pin Logic Sense, for GEN 0 and 1 */ - __I uint32_t _RESERVED0[1];/**< Reserved, for GEN 2 and 3 */ - }; - __IO uint32_t STAT[2]; /**< Fault Status */ - __I uint32_t _RESERVED1[29]; /**< Reserved */ -} PWM_FLT_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Master Control */ - __IO uint32_t SYNC; /**< Time Base Sync */ - __IO uint32_t ENABLE; /**< Output Enable */ - __IO uint32_t INVERT; /**< Output Inversion */ - __IO uint32_t FAULT; /**< Output Fault */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __I uint32_t STATUS; /**< Status */ - __IO uint32_t FAULTVAL; /**< Fault Condition Value */ - __IO uint32_t ENUPD; /**< Enable Update */ - __I uint32_t _RESERVED0[5]; /**< Reserved */ - __IO PWM_GENERATOR_T PWM[4]; /**< PWM Generator 0, 1, 2 and 3 */ - __I uint32_t _RESERVED1[432];/**< Reserved */ - PWM_FLT_t FLT[4]; /**< Fault registers 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[368];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} PWM_TypeDef; - -/** - * @brief Quadrature Encoder Interface - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __I uint32_t STAT; /**< Status */ - __IO uint32_t POS; /**< Position */ - __IO uint32_t MAXPOS; /**< Maximum Position */ - __IO uint32_t LOAD; /**< Timer Load */ - __I uint32_t TIME; /**< Timer */ - __I uint32_t COUNT; /**< Velocity Counter */ - __I uint32_t SPEED; /**< Velocity */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ -} QEI_TypeDef; - -/** - * @brief Synchronous Serial Interface - */ -typedef struct -{ - __IO uint32_t CR[2]; /**< Control 0, 1 */ - __IO uint32_t DR; /**< Data */ - __I uint32_t SR; /**< Status */ - __IO uint32_t CPSR; /**< Clock Prescale */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED0[1000];/**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} SSI_TypeDef; - -/** - * @brief System Control - */ -typedef struct -{ - __I uint32_t DID0; /**< Device Identification 0 */ - __I uint32_t DID1; /**< Device Identification 1 */ - __I uint32_t RESERVED0[12]; /**< Reserved */ - __IO uint32_t PBORCTL; /**< Power-Temp Brown Out Control */ - __I uint32_t RESERVED1[5]; /**< Reserved */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IMC; /**< Interrupt Mask Control */ - __IO uint32_t MISC; /**< Interrupt Status and Clear */ - __IO uint32_t RESC; /**< Reset Cause */ - __IO uint32_t PWRTC; /**< Power-Temperature Cause */ - __IO uint32_t NMIC; /**< NMI Cause Register */ - __I uint32_t RESERVED2[5]; /**< Reserved */ - __IO uint32_t MOSCCTL; /**< Main Oscillator Control */ - __I uint32_t RESERVED3[12]; /**< Reserved */ - __IO uint32_t RSCLKCFG; /**< Run and Sleep Mode Configuration Register */ - __I uint32_t RESERVEDx[3]; - __IO uint32_t MEMTIM0; /**< Memory Timing Parameter Register 0 for Main Flash and EEPROM */ - __I uint32_t RESERVED4[29]; /**< Reserved */ - __IO uint32_t ALTCLKCFG; /**< Alternate Clock Configuration */ - __I uint32_t RESERVED5[2]; /**< Reserved */ - __IO uint32_t DSLPCLKCFG; /**< Deep Sleep Clock Configuration */ - __IO uint32_t DIVSCLK; /**< Divisor and Source Clock Configuration */ - __I uint32_t SYSPROP; /**< System Properties */ - __IO uint32_t PIOSCCAL; /**< PIOSC Calibration */ - __I uint32_t PIOSCSTAT; /**< PIOSC Statistics */ - __I uint32_t RESERVED6[2]; /**< Reserved */ - __IO uint32_t PLLFREQ0; /**< PLL Frequency 0 */ - __IO uint32_t PLLFREQ1; /**< PLL Frequency 1 */ - __I uint32_t PLLSTAT; /**< PLL Frequency Status */ - __I uint32_t RESERVED7[7]; /**< Reserved */ - __IO uint32_t SLPPWRCFG; /**< Sleep Power Configuration */ - __IO uint32_t DSLPPWRCFG; /**< Deep-Sleep Power Configuration */ - __I uint32_t RESERVED8[4]; /**< Reserved */ - __I uint32_t NVMSTAT; /**< Non-Volatile Memory Information */ - __I uint32_t RESERVED9[4]; /**< Reserved */ - __IO uint32_t LDOSPCTL; /**< LDO Sleep Power Control */ - __I uint32_t LDOSPCAL; /**< LDO Sleep Power Calibration */ - __IO uint32_t LDODPCTL; /**< LDO Deep-Sleep Power Control */ - __I uint32_t LDODPCAL; /**< LDO Deep-Sleep Power Calibration */ - __I uint32_t RESERVED10[2]; /**< Reserved */ - __I uint32_t SDPMST; /**< Sleep/Deep-Sleep Power Mode Status */ - __I uint32_t RESERVED11[2]; /**< Reserved */ - __IO uint32_t RESBEHAVCTL; /**< Reset Behavior Control Register */ - __I uint32_t RESERVED12[6]; /**< Reserved */ - __IO uint32_t HSSR; /**< Hardware System Service Request */ - __I uint32_t RESERVED[34]; /**< Reserved */ - __I uint32_t USBPDS; /**< USB Power Domain Status */ - __IO uint32_t USBMPC; /**< USB Memory Power Control */ - __I uint32_t EMACPDS; /**< Ethernet MAC Power Domain Status */ - __IO uint32_t EMACMPC; /**< Ethernet MAC Memory Power Control */ - __I uint32_t RESERVED13[2]; /**< Reserved */ - __I uint32_t CAN0PDS; /**< CAN 0 Power Domain Status */ - __IO uint32_t CAN0MPC; /**< CAN 0 Memory Power Control */ - __I uint32_t CAN1PDS; /**< CAN 1 Power Domain Status */ - __IO uint32_t CAN1MPC; /**< CAN 1 Memory Power Control */ - __I uint32_t RESERVED14[22]; /**< Reserved */ - __I uint32_t PPWD; /**< WDT Peripheral Present */ - __I uint32_t PPTIMER; /**< GPT Peripheral Present */ - __I uint32_t PPGPIO; /**< GPIO Peripheral Present */ - __I uint32_t PPDMA; /**< UDMA Peripheral Present */ - __I uint32_t PPEPI; /**< EPI Peripheral Present */ - __I uint32_t PPHIB; /**< HIB Peripheral Present */ - __I uint32_t PPUART; /**< UART Peripheral Present */ - __I uint32_t PPSSI; /**< SSI Peripheral Present */ - __I uint32_t PPI2C; /**< I2C Peripheral Present */ - __I uint32_t RESERVED15[1]; /**< Reserved */ - __I uint32_t PPUSB; /**< USB Peripheral Present */ - __I uint32_t RESERVED16[1]; /**< Reserved */ - __I uint32_t PPEPHY; /**< Ethernet PHY Peripheral Present */ - __I uint32_t PPCAN; /**< CAN Peripheral Present */ - __I uint32_t PPADC; /**< ADC Peripheral Present */ - __I uint32_t PPACMP; /**< ACMP Peripheral Present */ - __I uint32_t PPPWM; /**< PWM Peripheral Present */ - __I uint32_t PPQEI; /**< QEI Peripheral Present */ - __I uint32_t PPLPC; /**< Low Pin Count Interface Peripheral Present */ - __I uint32_t RESERVED17[1]; /**< Reserved */ - __I uint32_t PPPECI; /**< Platform Environment Control Interface Peripheral Present */ - __I uint32_t PPFAN; /**< Fan Control Peripheral Present */ - __I uint32_t PPEEPROM; /**< EEPROM Peripheral Present */ - __I uint32_t PPWTIMER; /**< Wide GPT Peripheral Present */ - __I uint32_t RESERVED18[4]; /**< Reserved */ - __I uint32_t PPRTS; /**< Remote Temperature Sensor Peripheral Present */ - __I uint32_t PPCCM; /**< CRC Module Peripheral Present */ - __I uint32_t RESERVED19[6]; /**< Reserved */ - __I uint32_t PPLCD; /**< LCD Peripheral Present */ - __I uint32_t RESERVED20[1]; /**< Reserved */ - __I uint32_t PPOWIRE; /**< 1-Wire Peripheral Present */ - __I uint32_t PPEMAC; /**< Ethernet MAC Peripheral Present */ - __I uint32_t PPPRB; /**< Power Regulator Bus Peripheral Present */ - __I uint32_t PPHIM; /**< Human Interface Master Peripheral Present */ - __I uint32_t RESERVED21[86]; /**< Reserved */ - __IO uint32_t SRWD; /**< WDT Software Reset */ - __IO uint32_t SRTIMER; /**< GPT Software Reset */ - __IO uint32_t SRGPIO; /**< GPIO Software Reset */ - __IO uint32_t SRDMA; /**< UDMA Software Reset */ - __IO uint32_t SREPI; /**< EPI Software Reset */ - __IO uint32_t SRHIB; /**< HIB Software Reset */ - __IO uint32_t SRUART; /**< UART Software Reset */ - __IO uint32_t SRSSI; /**< SSI Software Reset */ - __IO uint32_t SRI2C; /**< I2C Software Reset */ - __I uint32_t RESERVED22[1]; /**< Reserved */ - __IO uint32_t SRUSB; /**< USB Software Reset */ - __I uint32_t RESERVED23[1]; /**< Reserved */ - __IO uint32_t SREPHY; /**< Ethernet PHY Software Reset */ - __IO uint32_t SRCAN; /**< CAN Software Reset */ - __IO uint32_t SRADC; /**< ADC Software Reset */ - __IO uint32_t SRACMP; /**< ACMP Software Reset */ - __IO uint32_t SRPWM; /**< PWM Software Reset */ - __IO uint32_t SRQEI; /**< QEI Software Reset */ - __I uint32_t RESERVED24[4]; /**< Reserved */ - __IO uint32_t SREEPROM; /**< EEPROM Software Reset */ - __I uint32_t RESERVED25[6]; /**< Reserved */ - __IO uint32_t SRCCM; /**< CRC Module Software Reset */ - __I uint32_t RESERVED26[9]; /**< Reserved */ - __IO uint32_t SREMAC; /**< Ethernet MAC Software Reset */ - __I uint32_t RESERVED27[24]; /**< Reserved */ - __IO uint32_t RCGCWD; /**< WDT Run Mode Clock Gating Control */ - __IO uint32_t RCGCTIMER; /**< GPT Run Mode Clock Gating Control */ - __IO uint32_t RCGCGPIO; /**< GPIO Run Mode Clock Gating Control */ - __IO uint32_t RCGCDMA; /**< UDMA Run Mode Clock Gating Control */ - __IO uint32_t RCGCEPI; /**< EPI Run Mode Clock Gating Control */ - __IO uint32_t RCGCHIB; /**< HIB Run Mode Clock Gating Control */ - __IO uint32_t RCGCUART; /**< UART Run Mode Control */ - __IO uint32_t RCGCSSI; /**< SSI Run Mode Clock Gating Control */ - __IO uint32_t RCGCI2C; /**< I2C Run Mode Clock Gating Control */ - __I uint32_t RESERVED28[1]; /**< Reserved */ - __IO uint32_t RCGCUSB; /**< USB Run Mode Clock Gating Control */ - __I uint32_t RESERVED29[1]; /**< Reserved */ - __IO uint32_t RCGCEPHY; /**< Ethernet PHY Run Mode Clock Gating Control */ - __IO uint32_t RCGCCAN; /**< CAN Run Mode Clock Gating Control */ - __IO uint32_t RCGCADC; /**< ADC Run Mode Clock Gating Control */ - __IO uint32_t RCGCACMP; /**< ACMP Run Mode Clock Gating Control */ - __IO uint32_t RCGCPWM; /**< PWM Run Mode Clock Gating Control */ - __IO uint32_t RCGCQEI; /**< QEI Run Mode Clock Gating Control */ - __I uint32_t RESERVED30[4]; /**< Reserved */ - __IO uint32_t RCGCEEPROM; /**< EEPROM Run Mode Clock Gating Control */ - __I uint32_t RESERVED31[6]; /**< Reserved */ - __IO uint32_t RCGCCCM; /**< CRC Module Run Mode Clock Gating Control */ - __I uint32_t RESERVED32[9]; /**< Reserved */ - __IO uint32_t RCGCEMAC; /**< Ethernet MAC Run Mode Clock Gating Control */ - __I uint32_t RESERVED33[24]; /**< Reserved */ - __IO uint32_t SCGCWD; /**< WDT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCTIMER; /**< GPT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCGPIO; /**< GPIO Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCDMA; /**< UDMA Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCEPI; /**< EPI Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCHIB; /**< HIB Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCUART; /**< UART Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCSSI; /**< SSI Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCI2C; /**< I2C Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED34[1]; /**< Reserved */ - __IO uint32_t SCGCUSB; /**< USB Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED35[1]; /**< Reserved */ - __IO uint32_t SCGCEPHY; /**< Ethernet PHY Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCCAN; /**< CAN Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCADC; /**< ADC Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCACMP; /**< ACMP Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCPWM; /**< PWM Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCQEI; /**< QEI Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED36[4]; /**< Reserved */ - __IO uint32_t SCGCEEPROM; /**< EEPROM Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED37[6]; /**< Reserved */ - __IO uint32_t SCGCCCM; /**< CRC Module Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED38[9]; /**< Reserved */ - __IO uint32_t SCGCEMAC; /**< Ethernet MAC Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED39[24]; /**< Reserved */ - __IO uint32_t DCGCWD; /**< WDT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCTIMER; /**< GPT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCGPIO; /**< GPIO Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCDMA; /**< UDMA Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCEPI; /**< EPI Deep-Sleep Mode Clock Gating Control */ - __IO uint32_t DCGCHIB; /**< HIB Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCUART; /**< UART Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCSSI; /**< SSI Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCI2C; /**< I2C Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED40[1]; /**< Reserved */ - __IO uint32_t DCGCUSB; /**< USB Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED41[1]; /**< Reserved */ - __IO uint32_t DCGCEPHY; /**< Ethernet PHY Deep-Sleep Mode Clock Gating Control */ - __IO uint32_t DCGCCAN; /**< CAN Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCADC; /**< ADC Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCACMP; /**< ACMP Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCPWM; /**< PWM Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCQEI; /**< QEI Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED42[4]; /**< Reserved */ - __IO uint32_t DCGCEEPROM; /**< EEPROM Deep-Sleep Mode Clock Gating - Control */ - __I uint32_t RESERVED43[6]; /**< Reserved */ - __IO uint32_t DCGCCCM; /**< CRC Module Deep-Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED44[9]; /**< Reserved */ - __IO uint32_t DCGCEMAC; /**< Ethernet MAC Deep-Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED45[24]; /**< Reserved */ - __IO uint32_t PCWD; /**< Watchdog Timer Power Control */ - __IO uint32_t PCTIMER; /**< 16/32-Bit General-Purpose Timer Power Control */ - __IO uint32_t PCGPIO; /**< General-Purpose Input/Output Power Control */ - __IO uint32_t PCDMA; /**< Micro Direct Memory Access Power Control */ - __IO uint32_t PCEPI; /**< External Peripheral Interface Power Control */ - __IO uint32_t PCHIB; /**< Hibernation Power Control */ - __IO uint32_t PCUART; /**< Universal Asynchronous Receiver/Transmitter Power Control */ - __IO uint32_t PCSSI; /**< Synchronous Serial Interface Power Control */ - __IO uint32_t PCI2C; /**< Inter-Integrated Circuit Power Control */ - __I uint32_t RESERVED46[1]; /**< Reserved */ - __IO uint32_t PCUSB; /**< Universal Serial Bus Power Control */ - __I uint32_t RESERVED47[1]; /**< Reserved */ - __IO uint32_t PCEPHY; /**< Ethernet PHY Power Control */ - __IO uint32_t PCCAN; /**< Controller Area Network Power Control */ - __IO uint32_t PCADC; /**< Analog-to-Digital Converter Power Control */ - __IO uint32_t PCACMP; /**< Analog Comparator Power Control */ - __IO uint32_t PCPWM; /**< Pulse Width Modulator Power Control */ - __IO uint32_t PCQEI; /**< Quadrature Encoder Interface Power Control */ - __I uint32_t RESERVED48[4]; /**< Reserved */ - __IO uint32_t PCEEPROM; /**< EEPROM Power Control */ - __I uint32_t RESERVED49[6]; /**< Reserved */ - __IO uint32_t PCCCM; /**< CRC Module Power Control */ - __I uint32_t RESERVED50[9]; /**< Reserved */ - __IO uint32_t PCEMAC; /**< Ethernet MAC Power Control */ - __I uint32_t RESERVED51[24]; /**< Reserved */ - __IO uint32_t PRWD; /**< WDT Peripheral Ready */ - __IO uint32_t PRTIMER; /**< GPT Peripheral Ready */ - __IO uint32_t PRGPIO; /**< GPIO Peripheral Ready */ - __IO uint32_t PRDMA; /**< UDMA Peripheral Ready */ - __IO uint32_t PREPI; /**< EPI Peripheral Ready */ - __IO uint32_t PRHIB; /**< HIB Peripheral Ready */ - __IO uint32_t PRUART; /**< UART Peripheral Ready */ - __IO uint32_t PRSSI; /**< SSI Peripheral Ready */ - __IO uint32_t PRI2C; /**< I2C Peripheral Ready */ - __I uint32_t RESERVED52[1]; /**< Reserved */ - __IO uint32_t PRUSB; /**< USB Peripheral Ready */ - __I uint32_t RESERVED53[1]; /**< Reserved */ - __IO uint32_t PREPHY; /**< Ethernet PHY Peripheral Ready */ - __IO uint32_t PRCAN; /**< CAN Peripheral Ready */ - __IO uint32_t PRADC; /**< ADC Peripheral Ready */ - __IO uint32_t PRACMP; /**< ACMP Peripheral Ready */ - __IO uint32_t PRPWM; /**< PWM Peripheral Ready */ - __IO uint32_t PRQEI; /**< QEI Peripheral Ready */ - __I uint32_t RESERVED54[4]; /**< Reserved */ - __IO uint32_t PREEPROM; /**< EEPROM Peripheral Ready */ - __I uint32_t RESERVED55[6]; /**< Reserved */ - __IO uint32_t PRCCM; /**< CRC Module Peripheral Ready */ - __I uint32_t RESERVED56[9]; /**< Reserved */ - __IO uint32_t PREMAC; /**< Ethernet MAC Peripheral Ready */ -} SYSCTL_TypeDef; - -/** - * @brief Universal Asynchronous Receiver/Transmitter - */ -typedef struct -{ - __IO uint32_t DR; /**< Data */ - union { - __I uint32_t RSR; /**< Receive Status */ - __O uint32_t ECR; /**< Error Clear */ - }; - __I uint32_t _RESERVED0[4]; /**< Reserved */ - __I uint32_t FR; /**< Flag */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t ILPR; /**< IrDA Low-Power Register */ - __IO uint32_t IBRD; /**< Integer Baud-Rate Divisor */ - __IO uint32_t FBRD; /**< Fractional Baud-Rate Divisor */ - __IO uint32_t LCRH; /**< Line Control */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IFLS; /**< Interrupt FIFO Level Select */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED2[22]; /**< Reserved */ - __IO uint32_t BIT9ADDR; /**< 9-Bit Self Address */ - __IO uint32_t BIT9AMASK; /**< 9-Bit Self Address Mask */ - __I uint32_t _RESERVED3[965];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} UART_TypeDef; - -/** - * @brief Micro Direct Memory Access - */ -typedef struct -{ - __IO uint32_t SET; /**< Set */ - __O uint32_t CLR; /**< Clear */ -} UDMA_SC_t; - -typedef struct -{ - __IO uint32_t STAT; /**< Status */ - __O uint32_t CFG; /**< Configuration */ - __IO uint32_t CTLBASE; /**< Channel Control Base Pointer */ - __IO uint32_t ALTBASE; /**< Alternate Channel Control Base Pointer */ - __IO uint32_t WAITSTAT; /**< Channel Wait-on-Request Status */ - __O uint32_t SWREQ; /**< Channel Software Request */ - UDMA_SC_t USEBURST; /**< Channel Useburst registers */ - UDMA_SC_t REQMASK; /**< Channel Request Mask registers */ - UDMA_SC_t ENA; /**< Channel Enable registers */ - UDMA_SC_t ALT; /**< Channel Primary Alternate registers */ - UDMA_SC_t PRIO; /**< Channel Priority registers */ - __I uint32_t _RESERVED0[3]; /**< Reserved */ - __IO uint32_t ERRCLR; /**< Bus Error Clear */ - __I uint32_t _RESERVED1[300];/**< Reserved */ - __IO uint32_t CHASGN; /**< Channel Assignment */ - __IO uint32_t CHIS; /**< Channel Interrupt Status */ - __I uint32_t _RESERVED2[2]; /**< Reserved */ - __IO uint32_t CHMAP[4]; /**< Channel Map Select 0, 1, 2 and 3 */ -} UDMA_TypeDef; - -// USB - -/** - * @brief Watchdog Timer - */ -typedef struct -{ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t VALUE; /**< Value */ - __IO uint32_t CTL; /**< Control */ - __O uint32_t ICR; /**< Interrupt Clear */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t _RESERVED0[256];/**< Reserved */ - __IO uint32_t TEST; /**< Test */ - __I uint32_t _RESERVED1[505];/**< Reserved */ - __IO uint32_t LOCK; /**< Lock */ -} WDG_TypeDef; - -/** - * @brief Ethernet peripheral - */ -typedef struct { - __IO uint32_t CFG; /**< Configuration */ - __IO uint32_t FRAMEFLTR; /**< Frame Filter */ - __IO uint32_t HASHTBLH; /**< Hash Table High */ - __IO uint32_t HASHTBLL; /**< Hash Table Low */ - __IO uint32_t MIIADDR; /**< MII Address */ - __IO uint32_t MIIDATA; /**< MII Data Register */ - __IO uint32_t FLOWCTL; /**< Flow Control */ - __IO uint32_t VLANTG; /**< VLAN Tag */ - __I uint32_t RESERVED0[1]; /**< Reserved */ - __IO uint32_t STATUS; /**< Status */ - __IO uint32_t RWUFF; /**< Remote Wake-Up Frame Filter */ - __IO uint32_t PMTCTLSTAT; /**< PMT Control and Status Register */ - __I uint32_t RESERVED1[2]; /**< Reserved */ - __IO uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IM; /**< Interrupt Mask */ - __IO uint32_t ADDR0H; /**< Address 0 High */ - __IO uint32_t ADDR0L; /**< Address 0 Low Register */ - __IO uint32_t ADDR1H; /**< Address 1 High */ - __IO uint32_t ADDR1L; /**< Address 1 Low */ - __IO uint32_t ADDR2H; /**< Address 2 High */ - __IO uint32_t ADDR2L; /**< Address 2 Low */ - __IO uint32_t ADDR3H; /**< Address 3 High */ - __IO uint32_t ADDR3L; /**< Address 3 Low */ - __I uint32_t RESERVED2[31]; /**< Reserved */ - __IO uint32_t WDOGTO; /**< Watchdog Timeout */ - __I uint32_t RESERVED3[8]; /**< Reserved */ - __IO uint32_t MMCCTRL; /**< MMC Control */ - __IO uint32_t MMCRXRIS; /**< MMC Receive Raw Interrupt Status */ - __IO uint32_t MMCTXRIS; /**< MMC Transmit Raw Interrupt Status */ - __IO uint32_t MMCRXIM; /**< MMC Receive Interrupt Mask */ - __IO uint32_t MMCTXIM; /**< MMC Transmit Interrupt Mask */ - __I uint32_t RESERVED4[1]; /**< Reserved */ - __IO uint32_t TXCNTGB; /**< Transmit Frame Count for Good and Bad - Frames */ - __I uint32_t RESERVED5[12]; /**< Reserved */ - __IO uint32_t TXCNTSCOL; /**< Transmit Frame Count for Frames - Transmitted after Single Collision */ - __IO uint32_t TXCNTMCOL; /**< Transmit Frame Count for Frames - Transmitted after Multiple Collisions */ - __I uint32_t RESERVED6[4]; /**< Reserved */ - __IO uint32_t TXOCTCNTG; /**< Transmit Octet Count Good */ - __I uint32_t RESERVED7[6]; /**< Reserved */ - __IO uint32_t RXCNTGB; /**< Receive Frame Count for Good and Bad - Frames */ - __I uint32_t RESERVED8[4]; /**< Reserved */ - __IO uint32_t RXCNTCRCERR; /**< Receive Frame Count for CRC Error Frames*/ - __IO uint32_t RXCNTALGNERR; /**< Receive Frame Count for Alignment Error - Frames */ - __I uint32_t RESERVED9[10]; /**< Reserved */ - __IO uint32_t RXCNTGUNI; /**< Receive Frame Count for Good Unicast - Frames */ - __I uint32_t RESERVED10[239];/**< Reserved */ - __IO uint32_t VLNINCREP; /**< VLAN Tag Inclusion or Replacement */ - __IO uint32_t VLANHASH; /**< VLAN Hash Table */ - __I uint32_t RESERVED11[93]; /**< Reserved */ - __IO uint32_t TIMSTCTRL; /**< Timestamp Control */ - __IO uint32_t SUBSECINC; /**< Sub-Second Increment */ - __IO uint32_t TIMSEC; /**< System Time - Seconds */ - __IO uint32_t TIMNANO; /**< System Time - Nanoseconds */ - __IO uint32_t TIMSECU; /**< System Time - Seconds Update */ - __IO uint32_t TIMNANOU; /**< System Time - Nanoseconds Update */ - __IO uint32_t TIMADD; /**< Timestamp Addend */ - __IO uint32_t TARGSEC; /**< Target Time Seconds */ - __IO uint32_t TARGNANO; /**< Target Time Nanoseconds */ - __IO uint32_t HWORDSEC; /**< System Time-Higher Word Seconds */ - __IO uint32_t TIMSTAT; /**< Timestamp Status */ - __IO uint32_t PPSCTRL; /**< PPS Control */ - __I uint32_t RESERVED12[12]; /**< Reserved */ - __IO uint32_t PPS0INTVL; /**< PPS0 Interval */ - __IO uint32_t PPS0WIDTH; /**< PPS0 Width */ - __I uint32_t RESERVED13[294];/**< Reserved */ - __IO uint32_t DMABUSMOD; /**< DMA Bus Mode */ - __O uint32_t TXPOLLD; /**< Transmit Poll Demand */ - __O uint32_t RXPOLLD; /**< Receive Poll Demand */ - __IO uint32_t RXDLADDR; /**< Receive Descriptor List Address */ - __IO uint32_t TXDLADDR; /**< Transmit Descriptor List Address */ - __IO uint32_t DMARIS; /**< DMA Interrupt Status */ - __IO uint32_t DMAOPMODE; /**< DMA Operation Mode */ - __IO uint32_t DMAIM; /**< DMA Interrupt Mask Register */ - __IO uint32_t MFBOC; /**< Missed Frame and Buffer Overflow Counter*/ - __IO uint32_t RXINTWDT; /**< Receive Interrupt Watchdog Timer */ - __I uint32_t RESERVED14[8]; /**< Reserved */ - __IO uint32_t HOSTXDESC; /**< Current Host Transmit Descriptor */ - __IO uint32_t HOSRXDESC; /**< Current Host Receive Descriptor */ - __IO uint32_t HOSTXBA; /**< Current Host Transmit Buffer Address */ - __IO uint32_t HOSRXBA; /**< Current Host Receive Buffer Address */ - __I uint32_t RESERVED15[218];/**< Reserved */ - __IO uint32_t PP; /**< Peripheral Property Register */ - __IO uint32_t PC; /**< Peripheral Configuration Register */ - __IO uint32_t CC; /**< Clock Configuration Register */ - __I uint32_t RESERVED16[1]; /**< Reserved */ - __I uint32_t PHYRIS; /**< PHY Raw Interrupt Status */ - __IO uint32_t PHYIM; /**< PHY Interrupt Mask */ - __IO uint32_t PHYMISC; /**< PHY Masked Interrupt Status and Clear */ -} ETH_TypeDef; - -/** - * @} - */ - -/** - * @addtogroup Peripheral_memorymap - * @{ - */ - -#define SYSCTL_BASE 0x400FE000 -#define HIB_BASE 0x400FC000 -#define FLASH_BASE 0x400FD000 -#define EEPROM_BASE 0x400AF000 -#define UDMA_BASE 0x400FF000 -#define GPIOA_BASE 0x40058000 -#define GPIOB_BASE 0x40059000 -#define GPIOC_BASE 0x4005A000 -#define GPIOD_BASE 0x4005B000 -#define GPIOE_BASE 0x4005C000 -#define GPIOF_BASE 0x4005D000 -#define GPIOG_BASE 0x4005E000 -#define GPIOH_BASE 0x4005F000 -#define GPIOJ_BASE 0x40060000 -#define GPIOK_BASE 0x40061000 -#define GPIOL_BASE 0x40062000 -#define GPIOM_BASE 0x40063000 -#define GPION_BASE 0x40064000 -#define GPIOP_BASE 0x40065000 -#define GPIOQ_BASE 0x40066000 -#define GPIOR_BASE 0x40067000 -#define GPIOS_BASE 0x40068000 -#define GPIOT_BASE 0x40069000 -#define GPT0_BASE 0x40030000 -#define GPT1_BASE 0x40031000 -#define GPT2_BASE 0x40032000 -#define GPT3_BASE 0x40033000 -#define GPT4_BASE 0x40034000 -#define GPT5_BASE 0x40035000 -#define GPT6_BASE 0x400E0000 -#define GPT7_BASE 0x400E1000 -#define WDT0_BASE 0x40000000 -#define WDT1_BASE 0x40001000 -#define ADC0_BASE 0x40038000 -#define ADC1_BASE 0x40039000 -#define UART0_BASE 0x4000C000 -#define UART1_BASE 0x4000D000 -#define UART2_BASE 0x4000E000 -#define UART3_BASE 0x4000F000 -#define UART4_BASE 0x40010000 -#define UART5_BASE 0x40011000 -#define UART6_BASE 0x40012000 -#define UART7_BASE 0x40013000 -#define SSI0_BASE 0x40008000 -#define SSI1_BASE 0x40009000 -#define SSI2_BASE 0x4000A000 -#define SSI3_BASE 0x4000B000 -#define I2C0_BASE 0x40020000 -#define I2C1_BASE 0x40021000 -#define I2C2_BASE 0x40022000 -#define I2C3_BASE 0x40023000 -#define I2C4_BASE 0x400C0000 -#define I2C5_BASE 0x400C1000 -#define I2C6_BASE 0x400C2000 -#define I2C7_BASE 0x400C3000 -#define I2C8_BASE 0x400B8000 -#define I2C9_BASE 0x400B9000 -#define CAN0_BASE 0x40040000 -#define CAN1_BASE 0x40041000 -// usb -#define ACMP_BASE 0x4003C000 -#define PWM0_BASE 0x40028000 -#define QEI0_BASE 0x4002C000 -#define QEI1_BASE 0x4002D000 - -#define ETH_BASE 0x400EC000 - -/** - * @} - */ - -/** - * @addtogroup Peripheral_declaration - * @{ - */ - -#define SYSCTL ((SYSCTL_TypeDef *) SYSCTL_BASE) -#define HIB ((HIB_TypeDef *) HIB_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_BASE) -#define EEPROM ((EEPROM_TypeDef *) EEPROM_BASE) -#define UDMA ((UDMA_TypeDef *) UDMA_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) -#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) -#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) -#define GPIOL ((GPIO_TypeDef *) GPIOL_BASE) -#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) -#define GPION ((GPIO_TypeDef *) GPION_BASE) -#define GPIOP ((GPIO_TypeDef *) GPIOP_BASE) -#define GPIOQ ((GPIO_TypeDef *) GPIOQ_BASE) -#define GPIOR ((GPIO_TypeDef *) GPIOR_BASE) -#define GPIOS ((GPIO_TypeDef *) GPIOS_BASE) -#define GPIOT ((GPIO_TypeDef *) GPIOT_BASE) -#define GPT0 ((GPT_TypeDef *) GPT0_BASE) -#define GPT1 ((GPT_TypeDef *) GPT1_BASE) -#define GPT2 ((GPT_TypeDef *) GPT2_BASE) -#define GPT3 ((GPT_TypeDef *) GPT3_BASE) -#define GPT4 ((GPT_TypeDef *) GPT4_BASE) -#define GPT5 ((GPT_TypeDef *) GPT5_BASE) -#define GPT6 ((GPT_TypeDef *) GPT6_BASE) -#define GPT7 ((GPT_TypeDef *) GPT7_BASE) -#define WDT0 ((WDT_TypeDef *) WDT0_BASE) -#define WDT1 ((WDT_TypeDef *) WDT1_BASE) -#define ADC0 ((ADC_TypeDef*) ADC0_BASE) -#define ADC1 ((ADC_TypeDef*) ADC1_BASE) -#define UART0 ((UART_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define UART3 ((UART_TypeDef *) UART3_BASE) -#define UART4 ((UART_TypeDef *) UART4_BASE) -#define UART5 ((UART_TypeDef *) UART5_BASE) -#define UART6 ((UART_TypeDef *) UART6_BASE) -#define UART7 ((UART_TypeDef *) UART7_BASE) -#define SSI0 ((SSI_TypeDef *) SSI0_BASE) -#define SSI1 ((SSI_TypeDef *) SSI1_BASE) -#define SSI2 ((SSI_TypeDef *) SSI2_BASE) -#define SSI3 ((SSI_TypeDef *) SSI3_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define I2C4 ((I2C_TypeDef *) I2C4_BASE) -#define I2C5 ((I2C_TypeDef *) I2C5_BASE) -#define I2C6 ((I2C_TypeDef *) I2C6_BASE) -#define I2C7 ((I2C_TypeDef *) I2C7_BASE) -#define I2C8 ((I2C_TypeDef *) I2C8_BASE) -#define I2C9 ((I2C_TypeDef *) I2C9_BASE) -#define CAN0 ((CAN_TypeDef *) CAN0_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -// usb -#define ACMP ((ACMP_TypeDef *) ACMP_BASE) -#define PWM0 ((PWM_TypeDef *) PWM0_BASE) -#define QEI0 ((QEI_TypeDef *) QEI0_BASE) -#define QEI1 ((QEI_TypeDef *) QEI1_BASE) - -#define ETH ((ETH_TypeDef *) ETH_BASE) - -/** - * @} - */ - -#endif /* __TM4C129x_H */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_community.c b/ChibiOS_16.1.5/community/os/hal/src/hal_community.c deleted file mode 100644 index 8a39bf1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_community.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_community.c - * @brief HAL subsystem code. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_COMMUNITY == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief HAL initialization (community part). - * - * @init - */ -void halCommunityInit(void) { - -#if HAL_USE_NAND || defined(__DOXYGEN__) - nandInit(); -#endif - -#if HAL_USE_EICU || defined(__DOXYGEN__) - eicuInit(); -#endif - -#if HAL_USE_CRC || defined(__DOXYGEN__) - crcInit(); -#endif - -#if HAL_USE_RNG || defined(__DOXYGEN__) - rngInit(); -#endif - -#if HAL_USE_USBH || defined(__DOXYGEN__) - usbhInit(); -#endif - -#if HAL_USE_TIMCAP || defined(__DOXYGEN__) - timcapInit(); -#endif - -#if HAL_USE_QEI || defined(__DOXYGEN__) - qeiInit(); -#endif -} - -#endif /* HAL_USE_COMMUNITY */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_crc.c b/ChibiOS_16.1.5/community/os/hal/src/hal_crc.c deleted file mode 100644 index 63799e4..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_crc.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * Hardware Abstraction Layer for CRC Unit - */ -#include "hal.h" - -#if (HAL_USE_CRC == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief CRC Driver initialization. - * - * @init - */ -void crcInit(void) { - crc_lld_init(); -} - -/** - * @brief Initializes the standard part of a @p CRCDriver structure. - * - * @param[out] crcp Pointer to the @p CRCDriver object - * - * @init - */ -void crcObjectInit(CRCDriver *crcp) { - crcp->state = CRC_STOP; - crcp->config = NULL; -#if CRC_USE_DMA == TRUE - crcp->thread = NULL; -#endif -#if CRC_USE_MUTUAL_EXCLUSION == TRUE - osalMutexObjectInit(&crcp->mutex); -#endif -#if defined(CRC_DRIVER_EXT_INIT_HOOK) - CRC_DRIVER_EXT_INIT_HOOK(crcp); -#endif -} - -/** - * @brief Configures and activates the CRC peripheral. - * - * @param[in] crcp Pointer to the @p CRCDriver object - * @param[in] config Pointer to the @p CRCConfig object - * @p NULL if the low level driver implementation - * supports a default configuration - * - * @api - */ -void crcStart(CRCDriver *crcp, const CRCConfig *config) { - osalDbgCheck(crcp != NULL); - - osalSysLock(); - osalDbgAssert((crcp->state == CRC_STOP) || (crcp->state == CRC_READY), - "invalid state"); - crcp->config = config; - crc_lld_start(crcp); - crcp->state = CRC_READY; - osalSysUnlock(); -} - -/** - * @brief Deactivates the CRC peripheral. - * - * @param[in] crcp Pointer to the @p CRCDriver object - * - * @api - */ -void crcStop(CRCDriver *crcp) { - osalDbgCheck(crcp != NULL); - - osalSysLock(); - osalDbgAssert((crcp->state == CRC_STOP) || (crcp->state == CRC_READY), - "invalid state"); - crc_lld_stop(crcp); - crcp->state = CRC_STOP; - osalSysUnlock(); -} - -/** - * @brief Resets the CRC calculation - * - * @param[in] crcp Pointer to the @p CRCDriver object - * - * @api - */ -void crcReset(CRCDriver *crcp) { - osalSysLock(); - crcResetI(crcp); - osalSysUnlock(); -} - -/** - * @brief Resets the current CRC calculation - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @iclass - */ -void crcResetI(CRCDriver *crcp) { - osalDbgCheck(crcp != NULL); - osalDbgAssert(crcp->state == CRC_READY, "Not ready"); - crc_lld_reset(crcp); -} - -/** - * @brief Performs a CRC calculation. - * @details This synchronous function performs a crc calculation operation. - * @pre In order to use this function the driver must have been configured - * without callbacks (@p end_cb = @p NULL). - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] n number of bytes to send - * @param[in] buf the pointer to the buffer - * - * @api - */ -uint32_t crcCalc(CRCDriver *crcp, size_t n, const void *buf) { - uint32_t crc; -#if CRC_USE_DMA - osalSysLock(); -#endif - crc = crcCalcI(crcp, n, buf); -#if CRC_USE_DMA - osalSysUnlock(); -#endif - return crc; -} - -/** - * @brief Performs a CRC calculation. - * @details This synchronous function performs a crc calcuation operation. - * @pre In order to use this function the driver must have been configured - * without callbacks (@p end_cb = @p NULL). - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] n number of bytes to send - * @param[in] buf the pointer to the buffer - * - * @iclass - */ -uint32_t crcCalcI(CRCDriver *crcp, size_t n, const void *buf) { - osalDbgCheck((crcp != NULL) && (n > 0U) && (buf != NULL)); - osalDbgAssert(crcp->state == CRC_READY, "not ready"); -#if CRC_USE_DMA - osalDbgAssert(crcp->config->end_cb == NULL, "callback defined"); - (crcp)->state = CRC_ACTIVE; -#endif - return crc_lld_calc(crcp, n, buf); -} - -#if CRC_USE_DMA == TRUE -/** - * @brief Performs a CRC calculation. - * @details This asynchronous function starts a crc calcuation operation. - * @pre In order to use this function the driver must have been configured - * with callbacks (@p end_cb != @p NULL). - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] n number of bytes to send - * @param[in] buf the pointer to the buffer - * - * @api - */ -void crcStartCalc(CRCDriver *crcp, size_t n, const void *buf) { - osalSysLock(); - crcStartCalcI(crcp, n, buf); - osalSysUnlock(); -} - -/** - * @brief Performs a CRC calculation. - * @details This asynchronous function starts a crc calcuation operation. - * @pre In order to use this function the driver must have been configured - * without callbacks (@p end_cb = @p NULL). - * @post At the end of the operation the configured callback is invoked. - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] n number of bytes to send - * @param[in] buf the pointer to the buffer - * - * - * @iclass - */ -void crcStartCalcI(CRCDriver *crcp, size_t n, const void *buf) { - osalDbgCheck((crcp != NULL) && (n > 0U) && (buf != NULL)); - osalDbgAssert(crcp->state == CRC_READY, "not ready"); - osalDbgAssert(crcp->config->end_cb != NULL, "callback not defined"); - (crcp)->state = CRC_ACTIVE; - crc_lld_start_calc(crcp, n, buf); -} -#endif - -#if (CRC_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) -/** - * @brief Gains exclusive access to the CRC unit. - * @details This function tries to gain ownership to the CRC, if the CRC is - * already being used then the invoking thread is queued. - * @pre In order to use this function the option @p CRC_USE_MUTUAL_EXCLUSION - * must be enabled. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @api - */ -void crcAcquireUnit(CRCDriver *crcp) { - osalDbgCheck(crcp != NULL); - - osalMutexLock(&crcp->mutex); -} - -/** - * @brief Releases exclusive access to the CRC unit. - * @pre In order to use this function the option @p CRC_USE_MUTUAL_EXCLUSION - * must be enabled. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @api - */ -void crcReleaseUnit(CRCDriver *crcp) { - osalDbgCheck(crcp != NULL); - - osalMutexUnlock(&crcp->mutex); -} -#endif /* CRC_USE_MUTUAL_EXCLUSION == TRUE */ - -#endif /* HAL_USE_CRC */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_ee24xx.c b/ChibiOS_16.1.5/community/os/hal/src/hal_ee24xx.c deleted file mode 100644 index 632ffbb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_ee24xx.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - Copyright (c) 2013 Timon Wong - - Permission is hereby granted, free of charge, to any person obtaining a copy - of this software and associated documentation files (the "Software"), to deal - in the Software without restriction, including without limitation the rights - to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - copies of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be included in all - copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - THE SOFTWARE. -*/ - -/* - Copyright 2012 Uladzimir Pylinski aka barthess. - You may use this work without restrictions, as long as this notice is included. - The work is provided "as is" without warranty of any kind, neither express nor implied. -*/ - -/***************************************************************************** - * DATASHEET NOTES - ***************************************************************************** -Write cycle time (byte or page) - 5 ms - -Note: - Page write operations are limited to writing bytes within a single physical - page, regardless of the number of bytes actually being written. Physical page - boundaries start at addresses that are integer multiples of the page buffer - size (or page size and end at addresses that are integer multiples of - [page size]. If a Page Write command attempts to write across a physical - page boundary, the result is that the data wraps around to the beginning of - the current page (overwriting data previously stored there), instead of - being written to the next page as might be expected. -*********************************************************************/ - -#include "hal_ee24xx.h" -#include - -#if (defined(HAL_USE_EEPROM) && HAL_USE_EEPROM && EEPROM_USE_EE24XX) || defined(__DOXYGEN__) - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ -/* -#if defined(SAM7_PLATFORM) -#define EEPROM_I2C_CLOCK (MCK / (((i2cp->config->cwgr & 0xFF) + ((i2cp->config->cwgr >> 8) & 0xFF)) * (1 << ((i2cp->config->cwgr >> 16) & 7)) + 6)) -#else -#define EEPROM_I2C_CLOCK (i2cp->config->clock_speed) -#endif -*/ -#define EEPROM_I2C_CLOCK 400000 - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -/* - ******************************************************************************* - * LOCAL FUNCTIONS - ******************************************************************************* - */ -/** - * @brief Split one uint16_t address to two uint8_t. - * - * @param[in] txbuf pointer to driver transmit buffer - * @param[in] addr uint16_t address - */ -#define eeprom_split_addr(txbuf, addr){ \ - (txbuf)[0] = ((uint8_t)((addr >> 8) & 0xFF)); \ - (txbuf)[1] = ((uint8_t)(addr & 0xFF)); \ - } - -/* - ******************************************************************************* - * EXPORTED FUNCTIONS - ******************************************************************************* - */ - -/** - * @brief Calculates requred timeout. - */ -static systime_t calc_timeout(I2CDriver *i2cp, size_t txbytes, size_t rxbytes) { - (void)i2cp; - const uint32_t bitsinbyte = 10; - uint32_t tmo; - tmo = ((txbytes + rxbytes + 1) * bitsinbyte * 1000); - tmo /= EEPROM_I2C_CLOCK; - tmo += 10; /* some additional milliseconds to be safer */ - return MS2ST(tmo); -} - -/** - * @brief EEPROM read routine. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file - * @param[in] offset addres of 1-st byte to be read - * @param[in] data pointer to buffer with data to be written - * @param[in] len number of bytes to be red - */ -static msg_t eeprom_read(const I2CEepromFileConfig *eepcfg, - uint32_t offset, uint8_t *data, size_t len) { - - msg_t status = MSG_RESET; - systime_t tmo = calc_timeout(eepcfg->i2cp, 2, len); - - osalDbgAssert(((len <= eepcfg->size) && ((offset + len) <= eepcfg->size)), - "out of device bounds"); - - eeprom_split_addr(eepcfg->write_buf, (offset + eepcfg->barrier_low)); - -#if I2C_USE_MUTUAL_EXCLUSION - i2cAcquireBus(eepcfg->i2cp); -#endif - - status = i2cMasterTransmitTimeout(eepcfg->i2cp, eepcfg->addr, - eepcfg->write_buf, 2, data, len, tmo); - -#if I2C_USE_MUTUAL_EXCLUSION - i2cReleaseBus(eepcfg->i2cp); -#endif - - return status; -} - -/** - * @brief EEPROM write routine. - * @details Function writes data to EEPROM. - * @pre Data must be fit to single EEPROM page. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file - * @param[in] offset addres of 1-st byte to be write - * @param[in] data pointer to buffer with data to be written - * @param[in] len number of bytes to be written - */ -static msg_t eeprom_write(const I2CEepromFileConfig *eepcfg, uint32_t offset, - const uint8_t *data, size_t len) { - msg_t status = MSG_RESET; - systime_t tmo = calc_timeout(eepcfg->i2cp, (len + 2), 0); - - osalDbgAssert(((len <= eepcfg->size) && ((offset + len) <= eepcfg->size)), - "out of device bounds"); - osalDbgAssert((((offset + eepcfg->barrier_low) / eepcfg->pagesize) == - (((offset + eepcfg->barrier_low) + len - 1) / eepcfg->pagesize)), - "data can not be fitted in single page"); - - /* write address bytes */ - eeprom_split_addr(eepcfg->write_buf, (offset + eepcfg->barrier_low)); - /* write data bytes */ - memcpy(&(eepcfg->write_buf[2]), data, len); - -#if I2C_USE_MUTUAL_EXCLUSION - i2cAcquireBus(eepcfg->i2cp); -#endif - - status = i2cMasterTransmitTimeout(eepcfg->i2cp, eepcfg->addr, - eepcfg->write_buf, (len + 2), NULL, 0, tmo); - -#if I2C_USE_MUTUAL_EXCLUSION - i2cReleaseBus(eepcfg->i2cp); -#endif - - /* wait until EEPROM process data */ - chThdSleep(eepcfg->write_time); - - return status; -} - -/** - * @brief Determines and returns size of data that can be processed - */ -static size_t __clamp_size(void *ip, size_t n) { - - if (((size_t)eepfs_getposition(ip) + n) > (size_t)eepfs_getsize(ip)) - return eepfs_getsize(ip) - eepfs_getposition(ip); - else - return n; -} - -/** - * @brief Write data that can be fitted in one page boundary - */ -static void __fitted_write(void *ip, const uint8_t *data, size_t len, uint32_t *written) { - - msg_t status = MSG_RESET; - - osalDbgAssert(len != 0, "something broken in hi level part"); - - status = eeprom_write(((I2CEepromFileStream *)ip)->cfg, - eepfs_getposition(ip), data, len); - if (status == MSG_OK) { - *written += len; - eepfs_lseek(ip, eepfs_getposition(ip) + len); - } -} - -/** - * @brief Write data to EEPROM. - * @details Only one EEPROM page can be written at once. So fucntion - * splits large data chunks in small EEPROM transactions if needed. - * @note To achieve the maximum effectivity use write operations - * aligned to EEPROM page boundaries. - */ -static size_t write(void *ip, const uint8_t *bp, size_t n) { - - size_t len = 0; /* bytes to be written at one trasaction */ - uint32_t written; /* total bytes successfully written */ - uint16_t pagesize; - uint32_t firstpage; - uint32_t lastpage; - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - - if (n == 0) - return 0; - - n = __clamp_size(ip, n); - if (n == 0) - return 0; - - pagesize = ((EepromFileStream *)ip)->cfg->pagesize; - firstpage = (((EepromFileStream *)ip)->cfg->barrier_low + - eepfs_getposition(ip)) / pagesize; - lastpage = (((EepromFileStream *)ip)->cfg->barrier_low + - eepfs_getposition(ip) + n - 1) / pagesize; - - written = 0; - /* data fitted in single page */ - if (firstpage == lastpage) { - len = n; - __fitted_write(ip, bp, len, &written); - bp += len; - return written; - } - - else { - /* write first piece of data to first page boundary */ - len = ((firstpage + 1) * pagesize) - eepfs_getposition(ip); - len -= ((EepromFileStream *)ip)->cfg->barrier_low; - __fitted_write(ip, bp, len, &written); - bp += len; - - /* now writes blocks at a size of pages (may be no one) */ - while ((n - written) > pagesize) { - len = pagesize; - __fitted_write(ip, bp, len, &written); - bp += len; - } - - /* wrtie tail */ - len = n - written; - if (len == 0) - return written; - else { - __fitted_write(ip, bp, len, &written); - } - } - - return written; -} - -/** - * Read some bytes from current position in file. After successful - * read operation the position pointer will be increased by the number - * of read bytes. - */ -static size_t read(void *ip, uint8_t *bp, size_t n) { - msg_t status = MSG_OK; - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - - if (n == 0) - return 0; - - n = __clamp_size(ip, n); - if (n == 0) - return 0; - - /* Stupid I2C cell in STM32F1x does not allow to read single byte. - So we must read 2 bytes and return needed one. */ -#if defined(STM32F1XX_I2C) - if (n == 1) { - uint8_t __buf[2]; - /* if NOT last byte of file requested */ - if ((eepfs_getposition(ip) + 1) < eepfs_getsize(ip)) { - if (read(ip, __buf, 2) == 2) { - eepfs_lseek(ip, (eepfs_getposition(ip) + 1)); - bp[0] = __buf[0]; - return 1; - } - else - return 0; - } - else { - eepfs_lseek(ip, (eepfs_getposition(ip) - 1)); - if (read(ip, __buf, 2) == 2) { - eepfs_lseek(ip, (eepfs_getposition(ip) + 2)); - bp[0] = __buf[1]; - return 1; - } - else - return 0; - } - } -#endif /* defined(STM32F1XX_I2C) */ - - /* call low level function */ - status = eeprom_read(((I2CEepromFileStream *)ip)->cfg, - eepfs_getposition(ip), bp, n); - if (status != MSG_OK) - return 0; - else { - eepfs_lseek(ip, (eepfs_getposition(ip) + n)); - return n; - } -} - -static const struct EepromFileStreamVMT vmt = { - write, - read, - eepfs_put, - eepfs_get, - eepfs_close, - eepfs_geterror, - eepfs_getsize, - eepfs_getposition, - eepfs_lseek, -}; - -EepromDevice eepdev_24xx = { - EEPROM_DEV_24XX, - &vmt -}; - -#endif /* EEPROM_USE_EE24XX */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_ee25xx.c b/ChibiOS_16.1.5/community/os/hal/src/hal_ee25xx.c deleted file mode 100644 index 102aef8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_ee25xx.c +++ /dev/null @@ -1,404 +0,0 @@ -/* - Copyright (c) 2013 Timon Wong - - Permission is hereby granted, free of charge, to any person obtaining a copy - of this software and associated documentation files (the "Software"), to deal - in the Software without restriction, including without limitation the rights - to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - copies of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be included in all - copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - THE SOFTWARE. -*/ - -/* - Copyright 2012 Uladzimir Pylinski aka barthess. - You may use this work without restrictions, as long as this notice is included. - The work is provided "as is" without warranty of any kind, neither express nor implied. -*/ - -/***************************************************************************** - * DATASHEET NOTES - ***************************************************************************** -Write cycle time (byte or page) - 5 ms - -Note: - Page write operations are limited to writing bytes within a single physical - page, regardless of the number of bytes actually being written. Physical page - boundaries start at addresses that are integer multiples of the page buffer - size (or page size and end at addresses that are integer multiples of - [page size]. If a Page Write command attempts to write across a physical - page boundary, the result is that the data wraps around to the beginning of - the current page (overwriting data previously stored there), instead of - being written to the next page as might be expected. -*********************************************************************/ - -#include "hal_ee25xx.h" -#include - -#if (defined(HAL_USE_EEPROM) && HAL_USE_EEPROM && EEPROM_USE_EE25XX) || defined(__DOXYGEN__) - -/** - * @name Commands of 25XX chip. - * @{ - */ -#define CMD_READ 0x03 /**< @brief Read data from memory array beginning at - selected address. */ -#define CMD_WRITE 0x02 /**< @brief Write data to memory array beginning at - selected address. */ -#define CMD_WRDI 0x04 /**< Reset the write enable latch (disable write - operations). */ -#define CMD_WREN 0x06 /**< Set the write enable latch (enable write - operations). */ -#define CMD_RDSR 0x05 /**< Read STATUS register. */ -#define CMD_WRSR 0x01 /**< Write STATUS register. */ - -/** @} */ - -/** - * @name Status of 25XX chip. - * @{} - */ -#define STAT_BP1 0x08 /**< @brief Block protection (high). */ -#define STAT_BP0 0x04 /**< @brief Block protection (low). */ -#define STAT_WEL 0x02 /**< @brief Write enable latch. */ -#define STAT_WIP 0x01 /**< @brief Write-In-Progress. */ - -/** @} */ - -/** - * @brief 25XX low level write then read rountine. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file. - * @param[in] txbuf pointer to buffer to be transfered. - * @param[in] txlen number of bytes to be transfered. - * @param[out] rxbuf pointer to buffer to be received. - * @param[in] rxlen number of bytes to be received. - */ -static void ll_25xx_transmit_receive(const SPIEepromFileConfig *eepcfg, - const uint8_t *txbuf, size_t txlen, - uint8_t *rxbuf, size_t rxlen) { - -#if SPI_USE_MUTUAL_EXCLUSION - spiAcquireBus(eepcfg->spip); -#endif - spiSelect(eepcfg->spip); - spiSend(eepcfg->spip, txlen, txbuf); - if (rxlen) /* Check if receive is needed. */ - spiReceive(eepcfg->spip, rxlen, rxbuf); - spiUnselect(eepcfg->spip); - -#if SPI_USE_MUTUAL_EXCLUSION - spiReleaseBus(eepcfg->spip); -#endif -} - -/** - * @brief Check whether the device is busy (writing in progress). - * - * @param[in] eepcfg pointer to configuration structure of eeprom file. - * @return @p true on busy. - */ -static bool ll_eeprom_is_busy(const SPIEepromFileConfig *eepcfg) { - - uint8_t cmd = CMD_RDSR; - uint8_t stat; - ll_25xx_transmit_receive(eepcfg, &cmd, 1, &stat, 1); - if (stat & STAT_WIP) - return TRUE; - return FALSE; -} - -/** - * @brief Lock device. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file. - */ -static void ll_eeprom_lock(const SPIEepromFileConfig *eepcfg) { - - uint8_t cmd = CMD_WRDI; - ll_25xx_transmit_receive(eepcfg, &cmd, 1, NULL, 0); -} - -/** - * @brief Unlock device. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file. - */ -static void ll_eeprom_unlock(const SPIEepromFileConfig *eepcfg) { - - uint8_t cmd = CMD_WREN; - ll_25xx_transmit_receive(eepcfg, &cmd, 1, NULL, 0); -} - -/** - * @brief Prepare byte sequence for command and address - * - * @param[in] seq pointer to first 3byte sequence - * @param[in] size size of the eeprom device - * @param[in] cmd command - * @param[in] addr address - * @return number of bytes of this sequence - */ -static uint8_t ll_eeprom_prepare_seq(uint8_t *seq, uint32_t size, uint8_t cmd, - uint32_t addr) { - - seq[0] = ((uint8_t)cmd & 0xff); - - if (size > 0xffffUL) { - /* High density, 24bit address. */ - seq[1] = (uint8_t)((addr >> 16) & 0xff); - seq[2] = (uint8_t)((addr >> 8) & 0xff); - seq[3] = (uint8_t)(addr & 0xff); - return 4; - } - else if (size > 0x00ffUL) { - /* Medium density, 16bit address. */ - seq[1] = (uint8_t)((addr >> 8) & 0xff); - seq[2] = (uint8_t)(addr & 0xff); - return 3; - } - - /* Low density, 8bit address. */ - seq[1] = (uint8_t)(addr & 0xff); - return 2; -} - -/** - * @brief EEPROM read routine. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file. - * @param[in] offset addres of 1-st byte to be read. - * @param[out] data pointer to buffer with data to be written. - * @param[in] len number of bytes to be red. - */ -static msg_t ll_eeprom_read(const SPIEepromFileConfig *eepcfg, uint32_t offset, - uint8_t *data, size_t len) { - - uint8_t txbuff[4]; - uint8_t txlen; - - osalDbgAssert(((len <= eepcfg->size) && ((offset + len) <= eepcfg->size)), - "out of device bounds"); - - if (eepcfg->spip->state != SPI_READY) - return MSG_RESET; - - txlen = ll_eeprom_prepare_seq(txbuff, eepcfg->size, CMD_READ, - (offset + eepcfg->barrier_low)); - ll_25xx_transmit_receive(eepcfg, txbuff, txlen, data, len); - - return MSG_OK; -} - -/** - * @brief EEPROM write routine. - * @details Function writes data to EEPROM. - * @pre Data must be fit to single EEPROM page. - * - * @param[in] eepcfg pointer to configuration structure of eeprom file. - * @param[in] offset addres of 1-st byte to be writen. - * @param[in] data pointer to buffer with data to be written. - * @param[in] len number of bytes to be written. - */ -static msg_t ll_eeprom_write(const SPIEepromFileConfig *eepcfg, uint32_t offset, - const uint8_t *data, size_t len) { - - uint8_t txbuff[4]; - uint8_t txlen; - systime_t now; - - osalDbgAssert(((len <= eepcfg->size) && ((offset + len) <= eepcfg->size)), - "out of device bounds"); - osalDbgAssert((((offset + eepcfg->barrier_low) / eepcfg->pagesize) == - (((offset + eepcfg->barrier_low) + len - 1) / eepcfg->pagesize)), - "data can not be fitted in single page"); - - if (eepcfg->spip->state != SPI_READY) - return MSG_RESET; - - /* Unlock array for writting. */ - ll_eeprom_unlock(eepcfg); - -#if SPI_USE_MUTUAL_EXCLUSION - spiAcquireBus(eepcfg->spip); -#endif - - spiSelect(eepcfg->spip); - txlen = ll_eeprom_prepare_seq(txbuff, eepcfg->size, CMD_WRITE, - (offset + eepcfg->barrier_low)); - spiSend(eepcfg->spip, txlen, txbuff); - spiSend(eepcfg->spip, len, data); - spiUnselect(eepcfg->spip); - -#if SPI_USE_MUTUAL_EXCLUSION - spiReleaseBus(eepcfg->spip); -#endif - - /* Wait until EEPROM process data. */ - now = chVTGetSystemTimeX(); - while (ll_eeprom_is_busy(eepcfg)) { - if ((chVTGetSystemTimeX() - now) > eepcfg->write_time) { - return MSG_TIMEOUT; - } - - chThdYield(); - } - - /* Lock array preventing unexpected access */ - ll_eeprom_lock(eepcfg); - return MSG_OK; -} - -/** - * @brief Determines and returns size of data that can be processed - */ -static size_t __clamp_size(void *ip, size_t n) { - - if (((size_t)eepfs_getposition(ip) + n) > (size_t)eepfs_getsize(ip)) - return eepfs_getsize(ip) - eepfs_getposition(ip); - else - return n; -} - -/** - * @brief Write data that can be fitted in one page boundary - */ -static msg_t __fitted_write(void *ip, const uint8_t *data, size_t len, uint32_t *written) { - - msg_t status = MSG_RESET; - - osalDbgAssert(len != 0, "something broken in hi level part"); - - status = ll_eeprom_write(((SPIEepromFileStream *)ip)->cfg, - eepfs_getposition(ip), data, len); - if (status == MSG_OK) { - *written += len; - eepfs_lseek(ip, eepfs_getposition(ip) + len); - } - return status; -} - -/** - * @brief Write data to EEPROM. - * @details Only one EEPROM page can be written at once. So fucntion - * splits large data chunks in small EEPROM transactions if needed. - * @note To achieve the maximum effectivity use write operations - * aligned to EEPROM page boundaries. - */ -static size_t write(void *ip, const uint8_t *bp, size_t n) { - - size_t len = 0; /* bytes to be written at one trasaction */ - uint32_t written; /* total bytes successfully written */ - uint16_t pagesize; - uint32_t firstpage; - uint32_t lastpage; - - volatile const SPIEepromFileConfig *cfg = ((SPIEepromFileStream *)ip)->cfg; - - osalDbgCheck((ip != NULL) && (((SPIEepromFileStream *)ip)->vmt != NULL)); - - if (n == 0) - return 0; - - n = __clamp_size(ip, n); - if (n == 0) - return 0; - - pagesize = cfg->pagesize; - firstpage = (cfg->barrier_low + eepfs_getposition(ip)) / pagesize; - lastpage = ((cfg->barrier_low + eepfs_getposition(ip) + n) - 1) / pagesize; - - written = 0; - /* data fitted in single page */ - if (firstpage == lastpage) { - len = n; - __fitted_write(ip, bp, len, &written); - bp += len; - return written; - } - else { - /* write first piece of data to first page boundary */ - len = ((firstpage + 1) * pagesize) - eepfs_getposition(ip); - len -= cfg->barrier_low; - __fitted_write(ip, bp, len, &written); - bp += len; - - /* now writes blocks at a size of pages (may be no one) */ - while ((n - written) > pagesize) { - len = pagesize; - if (__fitted_write(ip, bp, len, &written) != MSG_OK) // Fixed: Would increase bp forever and crash in case of timeouts... - return written; - - bp += len; - } - - - /* wrtie tail */ - len = n - written; - if (len == 0) - return written; - else { - __fitted_write(ip, bp, len, &written); - } - } - - return written; -} - -/** - * Read some bytes from current position in file. After successful - * read operation the position pointer will be increased by the number - * of read bytes. - */ -static size_t read(void *ip, uint8_t *bp, size_t n) { - - msg_t status = MSG_OK; - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - - if (n == 0) - return 0; - - n = __clamp_size(ip, n); - if (n == 0) - return 0; - - /* call low level function */ - status = ll_eeprom_read(((SPIEepromFileStream *)ip)->cfg, - eepfs_getposition(ip), bp, n); - if (status != MSG_OK) - return 0; - else { - eepfs_lseek(ip, (eepfs_getposition(ip) + n)); - return n; - } -} - -static const struct EepromFileStreamVMT vmt = { - write, - read, - eepfs_put, - eepfs_get, - eepfs_close, - eepfs_geterror, - eepfs_getsize, - eepfs_getposition, - eepfs_lseek, -}; - -EepromDevice eepdev_25xx = { - EEPROM_DEV_25XX, - &vmt -}; - -#endif /* EEPROM_USE_EE25XX */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_eeprom.c b/ChibiOS_16.1.5/community/os/hal/src/hal_eeprom.c deleted file mode 100644 index f77d616..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_eeprom.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - Copyright (c) 2013 Timon Wong - - Permission is hereby granted, free of charge, to any person obtaining a copy - of this software and associated documentation files (the "Software"), to deal - in the Software without restriction, including without limitation the rights - to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - copies of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be included in all - copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - THE SOFTWARE. -*/ - -/* - Copyright 2012 Uladzimir Pylinski aka barthess. - You may use this work without restrictions, as long as this notice is included. - The work is provided "as is" without warranty of any kind, neither express nor implied. -*/ - -#include "hal_eeprom.h" -#include - -#if defined(HAL_USE_EEPROM) && HAL_USE_EEPROM - -extern EepromDevice eepdev_24xx; -extern EepromDevice eepdev_25xx; - -EepromDevice *__eeprom_drv_table[] = { - /* I2C related. */ -#if HAL_USE_I2C - -# if EEPROM_USE_EE24XX - &eepdev_24xx, -# endif - -#endif /* HAL_USE_I2C */ - - /* SPI related. */ -#if HAL_USE_SPI - -# if EEPROM_USE_EE25XX - &eepdev_25xx, -# endif - -#endif /* HAL_USE_SPI */ -}; - - -/** - * @breif Find low level EEPROM device by id. - */ -const EepromDevice *EepromFindDevice(uint8_t id) { - - uint8_t i; - const EepromDevice *drv; - - for (i = 0; i < EEPROM_TABLE_SIZE; i++) { - drv = __eeprom_drv_table[i]; - if (drv->id == id) { - return drv; - } - } - - return NULL; -} - -/** - * Open EEPROM IC as file and return pointer to the file stream object - * @note Fucntion allways successfully open file. All checking makes - * in read/write functions. - */ -EepromFileStream *EepromFileOpen(EepromFileStream *efs, - const EepromFileConfig *eepcfg, - const EepromDevice *eepdev) { - - osalDbgAssert((efs != NULL) && (eepcfg != NULL) && (eepdev != NULL) && - (eepdev->efsvmt != NULL), "EepromFileOpen"); - osalDbgAssert(efs->vmt != eepdev->efsvmt, "File allready opened"); - osalDbgAssert(eepcfg->barrier_hi > eepcfg->barrier_low, "Low barrier exceeds High barrier"); - osalDbgAssert(eepcfg->pagesize < eepcfg->size, "Pagesize cannot be lager than EEPROM size"); - osalDbgAssert(eepcfg->barrier_hi <= eepcfg->size, "Barrier exceeds EEPROM size"); - - efs->vmt = eepdev->efsvmt; - efs->cfg = eepcfg; - efs->errors = FILE_OK; - efs->position = 0; - return (EepromFileStream *)efs; -} - -uint8_t EepromReadByte(EepromFileStream *efs) { - - uint8_t buf; - fileStreamRead(efs, &buf, sizeof(buf)); - return buf; -} - -uint16_t EepromReadHalfword(EepromFileStream *efs) { - - uint16_t buf; - fileStreamRead(efs, (uint8_t *)&buf, sizeof(buf)); - return buf; -} - -uint32_t EepromReadWord(EepromFileStream *efs) { - - uint32_t buf; - fileStreamRead(efs, (uint8_t *)&buf, sizeof(buf)); - return buf; -} - -size_t EepromWriteByte(EepromFileStream *efs, uint8_t data) { - - return fileStreamWrite(efs, &data, sizeof(data)); -} - -size_t EepromWriteHalfword(EepromFileStream *efs, uint16_t data) { - - return fileStreamWrite(efs, (uint8_t *)&data, sizeof(data)); -} - -size_t EepromWriteWord(EepromFileStream *efs, uint32_t data) { - - return fileStreamWrite(efs, (uint8_t *)&data, sizeof(data)); -} - -msg_t eepfs_getsize(void *ip) { - - uint32_t h, l; - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL) && - (((EepromFileStream *)ip)->cfg != NULL)); - - h = ((EepromFileStream *)ip)->cfg->barrier_hi; - l = ((EepromFileStream *)ip)->cfg->barrier_low; - return h - l; -} - -msg_t eepfs_getposition(void *ip) { - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - - return ((EepromFileStream *)ip)->position; -} - -msg_t eepfs_lseek(void *ip, fileoffset_t offset) { - - uint32_t size; - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - - size = eepfs_getsize(ip); - if (offset > size) - offset = size; - ((EepromFileStream *)ip)->position = offset; - return offset; -} - -msg_t eepfs_close(void *ip) { - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - - ((EepromFileStream *)ip)->errors = FILE_OK; - ((EepromFileStream *)ip)->position = 0; - ((EepromFileStream *)ip)->vmt = NULL; - ((EepromFileStream *)ip)->cfg = NULL; - return FILE_OK; -} - -msg_t eepfs_geterror(void *ip) { - - osalDbgCheck((ip != NULL) && (((EepromFileStream *)ip)->vmt != NULL)); - return ((EepromFileStream *)ip)->errors; -} - -msg_t eepfs_put(void *ip, uint8_t b) { - - (void)ip; - (void)b; - return 0; -} - -msg_t eepfs_get(void *ip) { - - (void)ip; - return 0; -} - -#endif /* #if defined(HAL_USE_EEPROM) && HAL_USE_EEPROM */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_eicu.c b/ChibiOS_16.1.5/community/os/hal/src/hal_eicu.c deleted file mode 100644 index f75c58b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_eicu.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Rewritten by Emil Fresk (1/5 - 2014) for extended input capture - functionality. And fix for spurious callbacks in the interrupt handler. -*/ -/* - Improved by Uladzimir Pylinsky aka barthess (1/3 - 2015) for support of - 32-bit timers and timers with single capture/compare channels. -*/ - -/* - * Hardware Abstraction Layer for Extended Input Capture Unit - */ -#include "hal.h" - -#if (HAL_USE_EICU == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief EICU Driver initialization. - * - * @init - */ -void eicuInit(void) { - - eicu_lld_init(); -} - -/** - * @brief Initializes the standard part of a @p EICUDriver structure. - * - * @param[out] eicup Pointer to the @p EICUDriver object - * - * @init - */ -void eicuObjectInit(EICUDriver *eicup) { - - eicup->state = EICU_STOP; - eicup->config = NULL; -} - -/** - * @brief Configures and activates the EICU peripheral. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * @param[in] config Pointer to the @p EICUConfig object - * - * @api - */ -void eicuStart(EICUDriver *eicup, const EICUConfig *config) { - - osalDbgCheck((eicup != NULL) && (config != NULL)); - - osalSysLock(); - osalDbgAssert((eicup->state == EICU_STOP) || (eicup->state == EICU_READY), - "invalid state"); - eicup->config = config; - eicu_lld_start(eicup); - eicup->state = EICU_READY; - osalSysUnlock(); -} - -/** - * @brief Deactivates the EICU peripheral. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @api - */ -void eicuStop(EICUDriver *eicup) { - - osalDbgCheck(eicup != NULL); - - osalSysLock(); - osalDbgAssert((eicup->state == EICU_STOP) || (eicup->state == EICU_READY), - "invalid state"); - eicu_lld_stop(eicup); - eicup->state = EICU_STOP; - osalSysUnlock(); -} - -/** - * @brief Enables the extended input capture. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @api - */ -void eicuEnable(EICUDriver *eicup) { - - osalDbgCheck(eicup != NULL); - - osalSysLock(); - osalDbgAssert(eicup->state == EICU_READY, "invalid state"); - eicu_lld_enable(eicup); - eicup->state = EICU_WAITING; - osalSysUnlock(); -} - -/** - * @brief Disables the extended input capture. - * - * @param[in] eicup Pointer to the @p EICUDriver object - * - * @api - */ -void eicuDisable(EICUDriver *eicup) { - - osalDbgCheck(eicup != NULL); - - osalSysLock(); - osalDbgAssert((eicup->state == EICU_READY) || (eicup->state == EICU_IDLE) || - (eicup->state == EICU_ACTIVE) || (eicup->state == EICU_WAITING), - "invalid state"); - eicu_lld_disable(eicup); - eicup->state = EICU_READY; - osalSysUnlock(); -} - -#endif /* HAL_USE_EICU */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_nand.c b/ChibiOS_16.1.5/community/os/hal/src/hal_nand.c deleted file mode 100644 index 24dd6de..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_nand.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nand.c - * @brief NAND Driver code. - * - * @addtogroup NAND - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_NAND == TRUE) || defined(__DOXYGEN__) - -#include "string.h" /* for memset */ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Check page size. - * - * @param[in] page_data_size size of page data area - * - * @notapi - */ -static void pagesize_check(size_t page_data_size) { - - /* Page size out of bounds.*/ - osalDbgCheck((page_data_size >= NAND_MIN_PAGE_SIZE) && - (page_data_size <= NAND_MAX_PAGE_SIZE)); - - /* Page size must be power of 2.*/ - osalDbgCheck(((page_data_size - 1) & page_data_size) == 0); -} - -/** - * @brief Translate block-page-offset scheme to NAND internal address. - * - * @param[in] cfg pointer to the @p NANDConfig from - * corresponding NAND driver - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[in] page_offset data offset related to begin of page - * @param[out] addr buffer to store calculated address - * @param[in] addr_len length of address buffer - * - * @notapi - */ -static void calc_addr(const NANDConfig *cfg, uint32_t block, uint32_t page, - uint32_t page_offset, uint8_t *addr, size_t addr_len) { - size_t i = 0; - uint32_t row = 0; - - /* Incorrect buffer length.*/ - osalDbgCheck(cfg->rowcycles + cfg->colcycles == addr_len); - osalDbgCheck((block < cfg->blocks) && (page < cfg->pages_per_block) && - (page_offset < cfg->page_data_size + cfg->page_spare_size)); - - /* convert address to NAND specific */ - memset(addr, 0, addr_len); - row = (block * cfg->pages_per_block) + page; - for (i=0; icolcycles; i++){ - addr[i] = page_offset & 0xFF; - page_offset = page_offset >> 8; - } - for (; i> 8; - } -} - -/** - * @brief Translate block number to NAND internal address. - * @note This function designed for erasing purpose. - * - * @param[in] cfg pointer to the @p NANDConfig from - * corresponding NAND driver - * @param[in] block block number - * @param[out] addr buffer to store calculated address - * @param[in] addr_len length of address buffer - * - * @notapi - */ -static void calc_blk_addr(const NANDConfig *cfg, uint32_t block, - uint8_t *addr, size_t addr_len) { - size_t i = 0; - uint32_t row = 0; - - /* Incorrect buffer length.*/ - osalDbgCheck(cfg->rowcycles == addr_len); - osalDbgCheck((block < cfg->blocks)); - - /* convert address to NAND specific */ - memset(addr, 0, addr_len); - row = block * cfg->pages_per_block; - for (i=0; i> 8; - } -} - -/** - * @brief Read block badness mark directly from NAND memory array. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * - * @return block condition - * @retval true if the block is bad. - * @retval false if the block is good. - * - * @notapi - */ -static bool read_is_block_bad(NANDDriver *nandp, size_t block) { - - if (0xFF != nandReadBadMark(nandp, block, 0)) - return true; - if (0xFF != nandReadBadMark(nandp, block, 1)) - return true; - - return false; -} - -/** - * @brief Scan for bad blocks and fill map with their numbers. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @notapi - */ -static void scan_bad_blocks(NANDDriver *nandp) { - - const size_t blocks = nandp->config->blocks; - size_t b; - - osalDbgCheck(bitmapGetBitsCount(nandp->bb_map) >= blocks); - - /* clear map just to be safe */ - bitmapObjectInit(nandp->bb_map, 0); - - /* now write numbers of bad block to map */ - for (b=0; bbb_map, b); - } - } -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief NAND Driver initialization. - * @note This function is implicitly invoked by @p halInit(), there is - * no need to explicitly initialize the driver. - * - * @init - */ -void nandInit(void) { - - nand_lld_init(); -} - -/** - * @brief Initializes the standard part of a @p NANDDriver structure. - * - * @param[out] nandp pointer to the @p NANDDriver object - * - * @init - */ -void nandObjectInit(NANDDriver *nandp) { - -#if NAND_USE_MUTUAL_EXCLUSION -#if CH_CFG_USE_MUTEXES - chMtxObjectInit(&nandp->mutex); -#else - chSemObjectInit(&nandp->semaphore, 1); -#endif /* CH_CFG_USE_MUTEXES */ -#endif /* NAND_USE_MUTUAL_EXCLUSION */ - - nandp->state = NAND_STOP; - nandp->config = NULL; -} - -/** - * @brief Configures and activates the NAND peripheral. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] config pointer to the @p NANDConfig object - * @param[in] bb_map pointer to the bad block map or @NULL if not need - * - * @api - */ -void nandStart(NANDDriver *nandp, const NANDConfig *config, bitmap_t *bb_map) { - - osalDbgCheck((nandp != NULL) && (config != NULL)); - osalDbgAssert((nandp->state == NAND_STOP) || - (nandp->state == NAND_READY), - "invalid state"); - - nandp->config = config; - pagesize_check(nandp->config->page_data_size); - nand_lld_start(nandp); - nandp->state = NAND_READY; - - if (NULL != bb_map) { - nandp->bb_map = bb_map; - scan_bad_blocks(nandp); - } -} - -/** - * @brief Deactivates the NAND peripheral. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @api - */ -void nandStop(NANDDriver *nandp) { - - osalDbgCheck(nandp != NULL); - osalDbgAssert((nandp->state == NAND_STOP) || - (nandp->state == NAND_READY), - "invalid state"); - nand_lld_stop(nandp); - nandp->state = NAND_STOP; -} - -/** - * @brief Read whole page. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[out] data buffer to store data - * @param[in] datalen length of data buffer - * - * @api - */ -void nandReadPageWhole(NANDDriver *nandp, uint32_t block, uint32_t page, - uint8_t *data, size_t datalen) { - - const NANDConfig *cfg = nandp->config; - uint8_t addrbuf[8]; - size_t addrlen = cfg->rowcycles + cfg->colcycles; - - osalDbgCheck((nandp != NULL) && (data != NULL)); - osalDbgCheck((datalen <= (cfg->page_data_size + cfg->page_spare_size))); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_addr(cfg, block, page, 0, addrbuf, addrlen); - nand_lld_read_data(nandp, data, datalen, addrbuf, addrlen, NULL); -} - -/** - * @brief Write whole page. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[in] data buffer with data to be written - * @param[in] datalen length of data buffer - * - * @return The operation status reported by NAND IC (0x70 command). - * - * @api - */ -uint8_t nandWritePageWhole(NANDDriver *nandp, uint32_t block, uint32_t page, - const uint8_t *data, size_t datalen) { - - uint8_t retval; - const NANDConfig *cfg = nandp->config; - uint8_t addr[8]; - size_t addrlen = cfg->rowcycles + cfg->colcycles; - - osalDbgCheck((nandp != NULL) && (data != NULL)); - osalDbgCheck((datalen <= (cfg->page_data_size + cfg->page_spare_size))); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_addr(cfg, block, page, 0, addr, addrlen); - retval = nand_lld_write_data(nandp, data, datalen, addr, addrlen, NULL); - return retval; -} - -/** - * @brief Read page data without spare area. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[out] data buffer to store data - * @param[in] datalen length of data buffer - * @param[out] ecc pointer to calculated ECC. Ignored when NULL. - * - * @api - */ -void nandReadPageData(NANDDriver *nandp, uint32_t block, uint32_t page, - uint8_t *data, size_t datalen, uint32_t *ecc) { - - const NANDConfig *cfg = nandp->config; - uint8_t addrbuf[8]; - size_t addrlen = cfg->rowcycles + cfg->colcycles; - - osalDbgCheck((nandp != NULL) && (data != NULL)); - osalDbgCheck((datalen <= cfg->page_data_size)); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_addr(cfg, block, page, 0, addrbuf, addrlen); - nand_lld_read_data(nandp, data, datalen, addrbuf, addrlen, ecc); -} - -/** - * @brief Write page data without spare area. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[in] data buffer with data to be written - * @param[in] datalen length of data buffer - * @param[out] ecc pointer to calculated ECC. Ignored when NULL. - * - * @return The operation status reported by NAND IC (0x70 command). - * - * @api - */ -uint8_t nandWritePageData(NANDDriver *nandp, uint32_t block, uint32_t page, - const uint8_t *data, size_t datalen, uint32_t *ecc) { - - uint8_t retval; - const NANDConfig *cfg = nandp->config; - uint8_t addr[8]; - size_t addrlen = cfg->rowcycles + cfg->colcycles; - - osalDbgCheck((nandp != NULL) && (data != NULL)); - osalDbgCheck((datalen <= cfg->page_data_size)); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_addr(cfg, block, page, 0, addr, addrlen); - retval = nand_lld_write_data(nandp, data, datalen, addr, addrlen, ecc); - return retval; -} - -/** - * @brief Read page spare area. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[out] spare buffer to store data - * @param[in] sparelen length of data buffer - * - * @api - */ -void nandReadPageSpare(NANDDriver *nandp, uint32_t block, uint32_t page, - uint8_t *spare, size_t sparelen) { - - const NANDConfig *cfg = nandp->config; - uint8_t addr[8]; - size_t addrlen = cfg->rowcycles + cfg->colcycles; - - osalDbgCheck((NULL != spare) && (nandp != NULL)); - osalDbgCheck(sparelen <= cfg->page_spare_size); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_addr(cfg, block, page, cfg->page_data_size, addr, addrlen); - nand_lld_read_data(nandp, spare, sparelen, addr, addrlen, NULL); -} - -/** - * @brief Write page spare area. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * @param[in] spare buffer with spare data to be written - * @param[in] sparelen length of data buffer - * - * @return The operation status reported by NAND IC (0x70 command). - * - * @api - */ -uint8_t nandWritePageSpare(NANDDriver *nandp, uint32_t block, uint32_t page, - const uint8_t *spare, size_t sparelen) { - - uint8_t retVal; - const NANDConfig *cfg = nandp->config; - uint8_t addr[8]; - size_t addrlen = cfg->rowcycles + cfg->colcycles; - - osalDbgCheck((NULL != spare) && (nandp != NULL)); - osalDbgCheck(sparelen <= cfg->page_spare_size); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_addr(cfg, block, page, cfg->page_data_size, addr, addrlen); - retVal = nand_lld_write_data(nandp, spare, sparelen, addr, addrlen, NULL); - return retVal; -} - -/** - * @brief Mark block as bad. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * - * @api - */ -void nandMarkBad(NANDDriver *nandp, uint32_t block) { - - uint8_t bb_mark[2] = {0, 0}; - - nandWritePageSpare(nandp, block, 0, bb_mark, sizeof(bb_mark)); - nandWritePageSpare(nandp, block, 1, bb_mark, sizeof(bb_mark)); - - if (NULL != nandp->bb_map) - bitmapSet(nandp->bb_map, block); -} - -/** - * @brief Read bad mark out. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * @param[in] page page number related to begin of block - * - * @return Bad mark. - * - * @api - */ -uint8_t nandReadBadMark(NANDDriver *nandp, uint32_t block, uint32_t page) { - uint8_t bb_mark[1]; - - nandReadPageSpare(nandp, block, page, bb_mark, sizeof(bb_mark)); - return bb_mark[0]; -} - -/** - * @brief Erase block. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * - * @return The operation status reported by NAND IC (0x70 command). - * - * @api - */ -uint8_t nandErase(NANDDriver *nandp, uint32_t block) { - - uint8_t retVal; - const NANDConfig *cfg = nandp->config; - uint8_t addr[4]; - size_t addrlen = cfg->rowcycles; - - osalDbgCheck(nandp != NULL); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - calc_blk_addr(cfg, block, addr, addrlen); - retVal = nand_lld_erase(nandp, addr, addrlen); - return retVal; -} - -/** - * @brief Check block badness. - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[in] block block number - * - * @return block condition - * @retval true if the block is bad. - * @retval false if the block is good. - * - * @api - */ -bool nandIsBad(NANDDriver *nandp, uint32_t block) { - - osalDbgCheck(nandp != NULL); - osalDbgAssert(nandp->state == NAND_READY, "invalid state"); - - if (NULL != nandp->bb_map) - return 1 == bitmapGet(nandp->bb_map, block); - else - return read_is_block_bad(nandp, block); -} - -#if NAND_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) -/** - * @brief Gains exclusive access to the NAND bus. - * @details This function tries to gain ownership to the NAND bus, if the bus - * is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p NAND_USE_MUTUAL_EXCLUSION must be enabled. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @api - */ -void nandAcquireBus(NANDDriver *nandp) { - - osalDbgCheck(nandp != NULL); - -#if CH_CFG_USE_MUTEXES - chMtxLock(&nandp->mutex); -#elif CH_CFG_USE_SEMAPHORES - chSemWait(&nandp->semaphore); -#endif -} - -/** - * @brief Releases exclusive access to the NAND bus. - * @pre In order to use this function the option - * @p NAND_USE_MUTUAL_EXCLUSION must be enabled. - * - * @param[in] nandp pointer to the @p NANDDriver object - * - * @api - */ -void nandReleaseBus(NANDDriver *nandp) { - - osalDbgCheck(nandp != NULL); - -#if CH_CFG_USE_MUTEXES - chMtxUnlock(&nandp->mutex); -#elif CH_CFG_USE_SEMAPHORES - chSemSignal(&nandp->semaphore); -#endif -} -#endif /* NAND_USE_MUTUAL_EXCLUSION */ - -#endif /* HAL_USE_NAND */ - -/** @} */ - - - - diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_onewire.c b/ChibiOS_16.1.5/community/os/hal/src/hal_onewire.c deleted file mode 100644 index a93eec0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_onewire.c +++ /dev/null @@ -1,890 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/*===========================================================================*/ -/* Main ideas: */ -/*=========================================================================== - -1) switch PWM output pin to open drain mode. -2) start 2 channels _simultaneously_. First (master channel) generates - pulses (read time slots) second (sample channel) generates interrupts - from where read pin function will be called. - -- --------------------------------------- master channel generates pulses - | / . - --............................. <---------- slave (not)pulls down bus here -- -------------------------------- sample channel reads pad state - | | - ------------- - ^ - | read interrupt fires here - -For data write it is only master channel needed. Data bit width updates -on every timer overflow event. -*/ - -/*===========================================================================*/ -/* General recommendations for strong pull usage */ -/*=========================================================================== - * 1) Use separate power rail instead of strong pull up whenever possible. - * Driver's strong pull up feature is very sensible to interrupt jitter. - * 2) Use specialized 1-wire bus master (DS2484 for example) if you are - * forced to handle bus requiring strong pull up feature. - */ - -/** - * @file onewire.c - * @brief 1-wire Driver code. - * - * @addtogroup onewire - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_ONEWIRE == TRUE) || defined(__DOXYGEN__) - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ -/** - * @brief 1MHz clock for PWM driver. - */ -#define ONEWIRE_PWM_FREQUENCY 1000000 - -/** - * @brief Pulse width constants in microseconds. - * @details Inspired by Microchip's AN1199 - * "1-Wire® Communication with PIC® Microcontroller" - */ -#define ONEWIRE_ZERO_WIDTH 60 -#define ONEWIRE_ONE_WIDTH 6 -#define ONEWIRE_SAMPLE_WIDTH 15 -#define ONEWIRE_RECOVERY_WIDTH 10 -#define ONEWIRE_RESET_LOW_WIDTH 480 -#define ONEWIRE_RESET_SAMPLE_WIDTH 550 -#define ONEWIRE_RESET_TOTAL_WIDTH 960 - -/** - * @brief Local function declarations. - */ -static void ow_reset_cb(PWMDriver *pwmp, onewireDriver *owp); -static void pwm_reset_cb(PWMDriver *pwmp); -static void ow_read_bit_cb(PWMDriver *pwmp, onewireDriver *owp); -static void pwm_read_bit_cb(PWMDriver *pwmp); -static void ow_write_bit_cb(PWMDriver *pwmp, onewireDriver *owp); -static void pwm_write_bit_cb(PWMDriver *pwmp); -#if ONEWIRE_USE_SEARCH_ROM -static void ow_search_rom_cb(PWMDriver *pwmp, onewireDriver *owp); -static void pwm_search_rom_cb(PWMDriver *pwmp); -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ -/** - * @brief 1-wire driver identifier. - */ -onewireDriver OWD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ -/** - * @brief Look up table for fast 1-wire CRC calculation - */ -static const uint8_t onewire_crc_table[256] = { - 0x0, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83, - 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41, - 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e, - 0x5f, 0x1, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc, - 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0, - 0xe1, 0xbf, 0x5d, 0x3, 0x80, 0xde, 0x3c, 0x62, - 0xbe, 0xe0, 0x2, 0x5c, 0xdf, 0x81, 0x63, 0x3d, - 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff, - 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5, - 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x7, - 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x6, 0x58, - 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a, - 0x65, 0x3b, 0xd9, 0x87, 0x4, 0x5a, 0xb8, 0xe6, - 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24, - 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b, - 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x5, 0xe7, 0xb9, - 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0xf, - 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd, - 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92, - 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0xe, 0x50, - 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c, - 0x6d, 0x33, 0xd1, 0x8f, 0xc, 0x52, 0xb0, 0xee, - 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0xd, 0xef, 0xb1, - 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73, - 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49, - 0x8, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b, - 0x57, 0x9, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4, - 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16, - 0xe9, 0xb7, 0x55, 0xb, 0x88, 0xd6, 0x34, 0x6a, - 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8, - 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7, - 0xb6, 0xe8, 0xa, 0x54, 0xd7, 0x89, 0x6b, 0x35 -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ -/** - * @brief Put bus in idle mode. - */ -static void ow_bus_idle(onewireDriver *owp) { -#if defined(STM32F1XX) - palSetPadMode(owp->config->port, owp->config->pad, - owp->config->pad_mode_idle); -#endif - pwmStop(owp->config->pwmd); -} - -/** - * @brief Put bus in active mode. - */ -static void ow_bus_active(onewireDriver *owp) { - pwmStart(owp->config->pwmd, owp->config->pwmcfg); -#if defined(STM32F1XX) - palSetPadMode(owp->config->port, owp->config->pad, - owp->config->pad_mode_active); -#endif -} - -/** - * @brief Function performing read of single bit. - * @note It must be callable from any context. - */ -static ioline_t ow_read_bit(onewireDriver *owp) { -#if ONEWIRE_SYNTH_SEARCH_TEST - (void)owp; - return _synth_ow_read_bit(); -#else - return palReadPad(owp->config->port, owp->config->pad); -#endif -} - -/** - * @brief PWM adapter - */ -static void pwm_reset_cb(PWMDriver *pwmp) { - ow_reset_cb(pwmp, &OWD1); -} - -/** - * @brief PWM adapter - */ -static void pwm_read_bit_cb(PWMDriver *pwmp) { - ow_read_bit_cb(pwmp, &OWD1); -} - -/** - * @brief PWM adapter - */ -static void pwm_write_bit_cb(PWMDriver *pwmp) { - ow_write_bit_cb(pwmp, &OWD1); -} - -#if ONEWIRE_USE_SEARCH_ROM -/** - * @brief PWM adapter - */ -static void pwm_search_rom_cb(PWMDriver *pwmp) { - ow_search_rom_cb(pwmp, &OWD1); -} -#endif /* ONEWIRE_USE_SEARCH_ROM */ - -/** - * @brief Write bit routine. - * @details Switch PWM channel to 'width' or 'narrow' pulse depending - * on value of bit need to be transmitted. - * - * @param[in] owp pointer to the @p onewireDriver object - * @param[in] bit value to be written - * - * @notapi - */ -static void ow_write_bit_I(onewireDriver *owp, ioline_t bit) { -#if ONEWIRE_SYNTH_SEARCH_TEST - _synth_ow_write_bit(owp, bit); -#else - osalSysLockFromISR(); - if (0 == bit) { - pwmEnableChannelI(owp->config->pwmd, owp->config->master_channel, - ONEWIRE_ZERO_WIDTH); - } - else { - pwmEnableChannelI(owp->config->pwmd, owp->config->master_channel, - ONEWIRE_ONE_WIDTH); - } - osalSysUnlockFromISR(); -#endif -} - -/** - * @brief 1-wire reset pulse callback. - * @note Must be called from PWM's ISR. - * - * @param[in] pwmp pointer to the @p PWMDriver object - * @param[in] owp pointer to the @p onewireDriver object - * - * @notapi - */ -static void ow_reset_cb(PWMDriver *pwmp, onewireDriver *owp) { - - owp->reg.slave_present = (PAL_LOW == ow_read_bit(owp)); - - osalSysLockFromISR(); - pwmDisableChannelI(pwmp, owp->config->sample_channel); - osalThreadResumeI(&owp->thread, MSG_OK); - osalSysUnlockFromISR(); -} - -/** - * @brief 1-wire read bit callback. - * @note Must be called from PWM's ISR. - * - * @param[in] pwmp pointer to the @p PWMDriver object - * @param[in] owp pointer to the @p onewireDriver object - * - * @notapi - */ -static void ow_read_bit_cb(PWMDriver *pwmp, onewireDriver *owp) { - - if (true == owp->reg.final_timeslot) { - osalSysLockFromISR(); - pwmDisableChannelI(pwmp, owp->config->sample_channel); - osalThreadResumeI(&owp->thread, MSG_OK); - osalSysUnlockFromISR(); - return; - } - else { - *owp->buf |= ow_read_bit(owp) << owp->reg.bit; - owp->reg.bit++; - if (8 == owp->reg.bit) { - owp->reg.bit = 0; - owp->buf++; - owp->reg.bytes--; - if (0 == owp->reg.bytes) { - owp->reg.final_timeslot = true; - osalSysLockFromISR(); - /* Only master channel must be stopped here. - Sample channel will be stopped in next ISR call. - It is still needed to generate final interrupt. */ - pwmDisableChannelI(pwmp, owp->config->master_channel); - osalSysUnlockFromISR(); - } - } - } -} - -/** - * @brief 1-wire bit transmission callback. - * @note Must be called from PWM's ISR. - * - * @param[in] pwmp pointer to the @p PWMDriver object - * @param[in] owp pointer to the @p onewireDriver object - * - * @notapi - */ -static void ow_write_bit_cb(PWMDriver *pwmp, onewireDriver *owp) { - - if (8 == owp->reg.bit) { - owp->buf++; - owp->reg.bit = 0; - owp->reg.bytes--; - - if (0 == owp->reg.bytes) { - osalSysLockFromISR(); - pwmDisableChannelI(pwmp, owp->config->master_channel); - osalSysUnlockFromISR(); - /* used to prevent premature timer stop from userspace */ - owp->reg.final_timeslot = true; - return; - } - } - - /* wait until timer generate last pulse */ - if (true == owp->reg.final_timeslot) { - #if ONEWIRE_USE_STRONG_PULLUP - if (owp->reg.need_pullup) { - owp->reg.state = ONEWIRE_PULL_UP; - owp->config->pullup_assert(); - owp->reg.need_pullup = false; - } - #endif - - osalSysLockFromISR(); - osalThreadResumeI(&owp->thread, MSG_OK); - osalSysUnlockFromISR(); - return; - } - - ow_write_bit_I(owp, (*owp->buf >> owp->reg.bit) & 1); - owp->reg.bit++; -} - -#if ONEWIRE_USE_SEARCH_ROM -/** - * @brief Helper function for collision handler - * - * @param[in] sr pointer to the @p onewire_search_rom_t helper structure - * @param[in] bit discovered bit to be stored in helper structure - */ -static void store_bit(onewire_search_rom_t *sr, uint8_t bit) { - - size_t rb = sr->reg.rombit; - - sr->retbuf[rb / CHAR_BIT] |= bit << (rb % CHAR_BIT); - sr->reg.rombit++; -} - -/** - * @brief Helper function for collision handler - * @details Extract bit from previous search path. - * - * @param[in] path pointer to the array with previous path stored in - * 'search ROM' helper structure - * @param[in] bit number of bit [0..63] - */ -static uint8_t extract_path_bit(const uint8_t *path, size_t bit) { - - return (path[bit / CHAR_BIT] >> (bit % CHAR_BIT)) & 1; -} - -/** - * @brief Collision handler for 'search ROM' procedure. - * @details You can find algorithm details in APPNOTE 187 - * "1-Wire Search Algorithm" from Maxim - * - * @param[in,out] sr pointer to the @p onewire_search_rom_t helper structure - */ -static uint8_t collision_handler(onewire_search_rom_t *sr) { - - uint8_t bit; - - switch(sr->reg.search_iter) { - case ONEWIRE_SEARCH_ROM_NEXT: - if ((int)sr->reg.rombit < sr->last_zero_branch) { - bit = extract_path_bit(sr->prev_path, sr->reg.rombit); - if (0 == bit) { - sr->prev_zero_branch = sr->reg.rombit; - sr->reg.result = ONEWIRE_SEARCH_ROM_SUCCESS; - } - store_bit(sr, bit); - return bit; - } - else if ((int)sr->reg.rombit == sr->last_zero_branch) { - sr->last_zero_branch = sr->prev_zero_branch; - store_bit(sr, 1); - return 1; - } - else { - /* found next branch some levels deeper */ - sr->prev_zero_branch = sr->last_zero_branch; - sr->last_zero_branch = sr->reg.rombit; - store_bit(sr, 0); - sr->reg.result = ONEWIRE_SEARCH_ROM_SUCCESS; - return 0; - } - break; - - case ONEWIRE_SEARCH_ROM_FIRST: - /* always take 0-branch */ - sr->prev_zero_branch = sr->last_zero_branch; - sr->last_zero_branch = sr->reg.rombit; - store_bit(sr, 0); - sr->reg.result = ONEWIRE_SEARCH_ROM_SUCCESS; - return 0; - break; - - default: - osalSysHalt("Unhandled case"); - return 0; /* warning supressor */ - break; - } -} - -/** - * @brief 1-wire search ROM callback. - * @note Must be called from PWM's ISR. - * - * @param[in] pwmp pointer to the @p PWMDriver object - * @param[in] owp pointer to the @p onewireDriver object - * - * @notapi - */ -static void ow_search_rom_cb(PWMDriver *pwmp, onewireDriver *owp) { - - onewire_search_rom_t *sr = &owp->search_rom; - - if (0 == sr->reg.bit_step) { /* read direct bit */ - sr->reg.bit_buf |= ow_read_bit(owp); - sr->reg.bit_step++; - } - else if (1 == sr->reg.bit_step) { /* read complement bit */ - sr->reg.bit_buf |= ow_read_bit(owp) << 1; - sr->reg.bit_step++; - switch(sr->reg.bit_buf){ - case 0b11: - /* no one device on bus or any other fail happened */ - sr->reg.result = ONEWIRE_SEARCH_ROM_ERROR; - goto THE_END; - break; - case 0b01: - /* all slaves have 1 in this position */ - store_bit(sr, 1); - ow_write_bit_I(owp, 1); - break; - case 0b10: - /* all slaves have 0 in this position */ - store_bit(sr, 0); - ow_write_bit_I(owp, 0); - break; - case 0b00: - /* collision */ - sr->reg.single_device = false; - ow_write_bit_I(owp, collision_handler(sr)); - break; - } - } - else { /* start next step */ - #if !ONEWIRE_SYNTH_SEARCH_TEST - ow_write_bit_I(owp, 1); - #endif - sr->reg.bit_step = 0; - sr->reg.bit_buf = 0; - } - - /* one ROM successfully discovered */ - if (64 == sr->reg.rombit) { - sr->reg.devices_found++; - sr->reg.search_iter = ONEWIRE_SEARCH_ROM_NEXT; - if (true == sr->reg.single_device) - sr->reg.result = ONEWIRE_SEARCH_ROM_LAST; - goto THE_END; - } - return; /* next search bit iteration */ - -THE_END: -#if ONEWIRE_SYNTH_SEARCH_TEST - (void)pwmp; - return; -#else - osalSysLockFromISR(); - pwmDisableChannelI(pwmp, owp->config->master_channel); - pwmDisableChannelI(pwmp, owp->config->sample_channel); - osalThreadResumeI(&(owp)->thread, MSG_OK); - osalSysUnlockFromISR(); -#endif -} - -/** - * @brief Helper function. Initialize structures required by 'search ROM'. - * @details Early reset. Call it once before 'search ROM' routine. - * - * @param[in] sr pointer to the @p onewire_search_rom_t helper structure - */ -static void search_clean_start(onewire_search_rom_t *sr) { - - sr->reg.single_device = true; /* presume simplest way at beginning */ - sr->reg.result = ONEWIRE_SEARCH_ROM_LAST; - sr->reg.search_iter = ONEWIRE_SEARCH_ROM_FIRST; - sr->retbuf = NULL; - sr->reg.devices_found = 0; - memset(sr->prev_path, 0, 8); - - sr->reg.rombit = 0; - sr->reg.bit_step = 0; - sr->reg.bit_buf = 0; - sr->last_zero_branch = -1; - sr->prev_zero_branch = -1; -} - -/** - * @brief Helper function. Prepare structures required by 'search ROM'. - * - * @param[in] sr pointer to the @p onewire_search_rom_t helper structure - */ -static void search_clean_iteration(onewire_search_rom_t *sr) { - - sr->reg.rombit = 0; - sr->reg.bit_step = 0; - sr->reg.bit_buf = 0; - sr->reg.result = ONEWIRE_SEARCH_ROM_LAST; -} -#endif /* ONEWIRE_USE_SEARCH_ROM */ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Calculates 1-wire CRC. - * - * @param[in] buf pointer to the data buffer - * @param[in] len lenght of data buffer - * - * @init - */ -uint8_t onewireCRC(const uint8_t *buf, size_t len) { - uint8_t ret = 0; - size_t i; - - for (i=0; iconfig = NULL; - owp->reg.slave_present = false; - owp->reg.state = ONEWIRE_STOP; - owp->thread = NULL; - - owp->reg.bytes = 0; - owp->reg.bit = 0; - owp->reg.final_timeslot = false; - owp->buf = NULL; - -#if ONEWIRE_USE_STRONG_PULLUP - owp->reg.need_pullup = false; -#endif -} - -/** - * @brief Configures and activates the 1-wire driver. - * - * @param[in] owp pointer to the @p onewireDriver object - * @param[in] config pointer to the @p onewireConfig object - * - * @api - */ -void onewireStart(onewireDriver *owp, const onewireConfig *config) { - - osalDbgCheck((NULL != owp) && (NULL != config)); - osalDbgAssert(PWM_STOP == config->pwmd->state, - "PWM will be started by onewire driver internally"); - osalDbgAssert(ONEWIRE_STOP == owp->reg.state, "Invalid state"); -#if ONEWIRE_USE_STRONG_PULLUP - osalDbgCheck((NULL != config->pullup_assert) && - (NULL != config->pullup_release)); -#endif - - owp->config = config; - owp->config->pwmcfg->frequency = ONEWIRE_PWM_FREQUENCY; - owp->config->pwmcfg->period = ONEWIRE_RESET_TOTAL_WIDTH; - -#if !defined(STM32F1XX) - palSetPadMode(owp->config->port, owp->config->pad, - owp->config->pad_mode_active); -#endif - ow_bus_idle(owp); - owp->reg.state = ONEWIRE_READY; -} - -/** - * @brief Deactivates the UART peripheral. - * - * @param[in] owp pointer to the @p onewireDriver object - * - * @api - */ -void onewireStop(onewireDriver *owp) { - osalDbgCheck(NULL != owp); -#if ONEWIRE_USE_STRONG_PULLUP - owp->config->pullup_release(); -#endif - ow_bus_idle(owp); - pwmStop(owp->config->pwmd); - owp->config = NULL; - owp->reg.state = ONEWIRE_STOP; -} - -/** - * @brief Generate reset pulse on bus. - * - * @param[in] owp pointer to the @p onewireDriver object - * - * @return Bool flag denoting device presence. - * @retval true There is at least one device on bus. - */ -bool onewireReset(onewireDriver *owp) { - PWMDriver *pwmd; - PWMConfig *pwmcfg; - size_t mch, sch; - - osalDbgCheck(NULL != owp); - osalDbgAssert(owp->reg.state == ONEWIRE_READY, "Invalid state"); - - /* short circuit on bus or any other device transmit data */ - if (PAL_LOW == ow_read_bit(owp)) - return false; - - pwmd = owp->config->pwmd; - pwmcfg = owp->config->pwmcfg; - mch = owp->config->master_channel; - sch = owp->config->sample_channel; - - - pwmcfg->period = ONEWIRE_RESET_LOW_WIDTH + ONEWIRE_RESET_SAMPLE_WIDTH; - pwmcfg->callback = NULL; - pwmcfg->channels[mch].callback = NULL; - pwmcfg->channels[mch].mode = owp->config->pwmmode; - pwmcfg->channels[sch].callback = pwm_reset_cb; - pwmcfg->channels[sch].mode = PWM_OUTPUT_ACTIVE_LOW; - - ow_bus_active(owp); - - osalSysLock(); - pwmEnableChannelI(pwmd, mch, ONEWIRE_RESET_LOW_WIDTH); - pwmEnableChannelI(pwmd, sch, ONEWIRE_RESET_SAMPLE_WIDTH); - pwmEnableChannelNotificationI(pwmd, sch); - osalThreadSuspendS(&owp->thread); - osalSysUnlock(); - - ow_bus_idle(owp); - - /* wait until slave release bus to discriminate short circuit condition */ - osalThreadSleepMicroseconds(500); - return (PAL_HIGH == ow_read_bit(owp)) && (true == owp->reg.slave_present); -} - -/** - * @brief Read some bites from slave device. - * - * @param[in] owp pointer to the @p onewireDriver object - * @param[out] rxbuf pointer to the buffer for read data - * @param[in] rxbytes amount of data to be received - */ -void onewireRead(onewireDriver *owp, uint8_t *rxbuf, size_t rxbytes) { - PWMDriver *pwmd; - PWMConfig *pwmcfg; - size_t mch, sch; - - osalDbgCheck((NULL != owp) && (NULL != rxbuf)); - osalDbgCheck((rxbytes > 0) && (rxbytes <= ONEWIRE_MAX_TRANSACTION_LEN)); - osalDbgAssert(owp->reg.state == ONEWIRE_READY, "Invalid state"); - - /* Buffer zeroing. This is important because of driver collects - bits using |= operation.*/ - memset(rxbuf, 0, rxbytes); - - pwmd = owp->config->pwmd; - pwmcfg = owp->config->pwmcfg; - mch = owp->config->master_channel; - sch = owp->config->sample_channel; - - owp->reg.bit = 0; - owp->reg.final_timeslot = false; - owp->buf = rxbuf; - owp->reg.bytes = rxbytes; - - pwmcfg->period = ONEWIRE_ZERO_WIDTH + ONEWIRE_RECOVERY_WIDTH; - pwmcfg->callback = NULL; - pwmcfg->channels[mch].callback = NULL; - pwmcfg->channels[mch].mode = owp->config->pwmmode; - pwmcfg->channels[sch].callback = pwm_read_bit_cb; - pwmcfg->channels[sch].mode = PWM_OUTPUT_ACTIVE_LOW; - - ow_bus_active(owp); - osalSysLock(); - pwmEnableChannelI(pwmd, mch, ONEWIRE_ONE_WIDTH); - pwmEnableChannelI(pwmd, sch, ONEWIRE_SAMPLE_WIDTH); - pwmEnableChannelNotificationI(pwmd, sch); - osalThreadSuspendS(&owp->thread); - osalSysUnlock(); - - ow_bus_idle(owp); -} - -/** - * @brief Read some bites from slave device. - * - * @param[in] owp pointer to the @p onewireDriver object - * @param[in] txbuf pointer to the buffer with data to be written - * @param[in] txbytes amount of data to be written - * @param[in] pullup_time how long strong pull up must be activated. Set - * it to 0 if not needed. - */ -void onewireWrite(onewireDriver *owp, uint8_t *txbuf, - size_t txbytes, systime_t pullup_time) { - PWMDriver *pwmd; - PWMConfig *pwmcfg; - size_t mch, sch; - - osalDbgCheck((NULL != owp) && (NULL != txbuf)); - osalDbgCheck((txbytes > 0) && (txbytes <= ONEWIRE_MAX_TRANSACTION_LEN)); - osalDbgAssert(owp->reg.state == ONEWIRE_READY, "Invalid state"); -#if !ONEWIRE_USE_STRONG_PULLUP - osalDbgAssert(0 == pullup_time, - "Non zero time is valid only when strong pull enabled"); -#endif - - pwmd = owp->config->pwmd; - pwmcfg = owp->config->pwmcfg; - mch = owp->config->master_channel; - sch = owp->config->sample_channel; - - owp->buf = txbuf; - owp->reg.bit = 0; - owp->reg.final_timeslot = false; - owp->reg.bytes = txbytes; - - pwmcfg->period = ONEWIRE_ZERO_WIDTH + ONEWIRE_RECOVERY_WIDTH; - pwmcfg->callback = pwm_write_bit_cb; - pwmcfg->channels[mch].callback = NULL; - pwmcfg->channels[mch].mode = owp->config->pwmmode; - pwmcfg->channels[sch].callback = NULL; - pwmcfg->channels[sch].mode = PWM_OUTPUT_DISABLED; - -#if ONEWIRE_USE_STRONG_PULLUP - if (pullup_time > 0) { - owp->reg.state = ONEWIRE_PULL_UP; - owp->reg.need_pullup = true; - } -#endif - - ow_bus_active(owp); - osalSysLock(); - pwmEnablePeriodicNotificationI(pwmd); - osalThreadSuspendS(&owp->thread); - osalSysUnlock(); - - pwmDisablePeriodicNotification(pwmd); - ow_bus_idle(owp); - -#if ONEWIRE_USE_STRONG_PULLUP - if (pullup_time > 0) { - osalThreadSleep(pullup_time); - owp->config->pullup_release(); - owp->reg.state = ONEWIRE_READY; - } -#endif -} - -#if ONEWIRE_USE_SEARCH_ROM -/** - * @brief Performs tree search on bus. - * @note This function does internal 1-wire reset calls every search - * iteration. - * - * @param[in] owp pointer to a @p OWDriver object - * @param[out] result pointer to buffer for discovered ROMs - * @param[in] max_rom_cnt buffer size in ROMs count for overflow prevention - * - * @return Count of discovered ROMs. May be more than max_rom_cnt. - * @retval 0 no ROMs found or communication error occurred. - */ -size_t onewireSearchRom(onewireDriver *owp, uint8_t *result, - size_t max_rom_cnt) { - PWMDriver *pwmd; - PWMConfig *pwmcfg; - uint8_t cmd; - size_t mch, sch; - - osalDbgCheck(NULL != owp); - osalDbgAssert(ONEWIRE_READY == owp->reg.state, "Invalid state"); - osalDbgCheck((max_rom_cnt <= 256) && (max_rom_cnt > 0)); - - pwmd = owp->config->pwmd; - pwmcfg = owp->config->pwmcfg; - cmd = ONEWIRE_CMD_SEARCH_ROM; - mch = owp->config->master_channel; - sch = owp->config->sample_channel; - - search_clean_start(&owp->search_rom); - - do { - /* every search must be started from reset pulse */ - if (false == onewireReset(owp)) - return 0; - - /* initialize buffer to store result */ - if (owp->search_rom.reg.devices_found >= max_rom_cnt) - owp->search_rom.retbuf = result + 8*(max_rom_cnt-1); - else - owp->search_rom.retbuf = result + 8*owp->search_rom.reg.devices_found; - memset(owp->search_rom.retbuf, 0, 8); - - /* clean iteration state */ - search_clean_iteration(&owp->search_rom); - - /**/ - onewireWrite(&OWD1, &cmd, 1, 0); - - /* Reconfiguration always needed because of previous call onewireWrite.*/ - pwmcfg->period = ONEWIRE_ZERO_WIDTH + ONEWIRE_RECOVERY_WIDTH; - pwmcfg->callback = NULL; - pwmcfg->channels[mch].callback = NULL; - pwmcfg->channels[mch].mode = owp->config->pwmmode; - pwmcfg->channels[sch].callback = pwm_search_rom_cb; - pwmcfg->channels[sch].mode = PWM_OUTPUT_ACTIVE_LOW; - - ow_bus_active(owp); - osalSysLock(); - pwmEnableChannelI(pwmd, mch, ONEWIRE_ONE_WIDTH); - pwmEnableChannelI(pwmd, sch, ONEWIRE_SAMPLE_WIDTH); - pwmEnableChannelNotificationI(pwmd, sch); - osalThreadSuspendS(&owp->thread); - osalSysUnlock(); - - ow_bus_idle(owp); - - if (ONEWIRE_SEARCH_ROM_ERROR != owp->search_rom.reg.result) { - /* check CRC and return 0 (0 == error) if mismatch */ - if (owp->search_rom.retbuf[7] != onewireCRC(owp->search_rom.retbuf, 7)) - return 0; - /* store cached result for usage in next iteration */ - memcpy(owp->search_rom.prev_path, owp->search_rom.retbuf, 8); - } - } - while (ONEWIRE_SEARCH_ROM_SUCCESS == owp->search_rom.reg.result); - - /**/ - if (ONEWIRE_SEARCH_ROM_ERROR == owp->search_rom.reg.result) - return 0; - else - return owp->search_rom.reg.devices_found; -} -#endif /* ONEWIRE_USE_SEARCH_ROM */ - -/* - * Include test code (if enabled). - */ -#if ONEWIRE_SYNTH_SEARCH_TEST -#include "search_rom_synth.c" -#endif - -#endif /* HAL_USE_ONEWIRE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_qei.c b/ChibiOS_16.1.5/community/os/hal/src/hal_qei.c deleted file mode 100644 index a2b7303..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_qei.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Martino Migliavacca - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_qei.c - * @brief QEI Driver code. - * - * @addtogroup QEI - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_QEI == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief QEI Driver initialization. - * @note This function is implicitly invoked by @p halInit(), there is - * no need to explicitly initialize the driver. - * - * @init - */ -void qeiInit(void) { - - qei_lld_init(); -} - -/** - * @brief Initializes the standard part of a @p QEIDriver structure. - * - * @param[out] qeip pointer to the @p QEIDriver object - * - * @init - */ -void qeiObjectInit(QEIDriver *qeip) { - - qeip->state = QEI_STOP; - qeip->last = 0; - qeip->config = NULL; -} - -/** - * @brief Configures and activates the QEI peripheral. - * - * @param[in] qeip pointer to the @p QEIDriver object - * @param[in] config pointer to the @p QEIConfig object - * - * @api - */ -void qeiStart(QEIDriver *qeip, const QEIConfig *config) { - - osalDbgCheck((qeip != NULL) && (config != NULL)); - - osalSysLock(); - osalDbgAssert((qeip->state == QEI_STOP) || (qeip->state == QEI_READY), - "invalid state"); - qeip->config = config; - qei_lld_start(qeip); - qeip->state = QEI_READY; - osalSysUnlock(); -} - -/** - * @brief Deactivates the QEI peripheral. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @api - */ -void qeiStop(QEIDriver *qeip) { - - osalDbgCheck(qeip != NULL); - - osalSysLock(); - osalDbgAssert((qeip->state == QEI_STOP) || (qeip->state == QEI_READY), - "invalid state"); - qei_lld_stop(qeip); - qeip->state = QEI_STOP; - osalSysUnlock(); -} - -/** - * @brief Enables the quadrature encoder interface. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @api - */ -void qeiEnable(QEIDriver *qeip) { - - osalDbgCheck(qeip != NULL); - - osalSysLock(); - osalDbgAssert(qeip->state == QEI_READY, "invalid state"); - qei_lld_enable(qeip); - qeip->state = QEI_ACTIVE; - osalSysUnlock(); -} - -/** - * @brief Disables the quadrature encoder interface. - * - * @param[in] qeip pointer to the @p QEIDriver object - * - * @api - */ -void qeiDisable(QEIDriver *qeip) { - - osalDbgCheck(qeip != NULL); - - osalSysLock(); - osalDbgAssert((qeip->state == QEI_READY) || (qeip->state == QEI_ACTIVE), - "invalid state"); - qei_lld_disable(qeip); - qeip->state = QEI_READY; - osalSysUnlock(); -} - -/** - * @brief Returns the counter value. - * - * @param[in] qeip pointer to the @p QEIDriver object - * @return The current counter value. - * - * @api - */ -qeicnt_t qeiGetCount(QEIDriver *qeip) { - qeicnt_t cnt; - - osalSysLock(); - cnt = qeiGetCountI(qeip); - osalSysUnlock(); - - return cnt; -} - -/** - * @brief Returns the counter delta from last reading. - * - * @param[in] qeip pointer to the @p QEIDriver object - * @return The delta from last read. - * - * @api - */ -qeidelta_t qeiUpdate(QEIDriver *qeip) { - qeidelta_t diff; - - osalSysLock(); - diff = qeiUpdateI(qeip); - osalSysUnlock(); - - return diff; -} - -/** - * @brief Returns the counter delta from last reading. - * - * @param[in] qeip pointer to the @p QEIDriver object - * @return The delta from last read. - * - * @iclass - */ -qeidelta_t qeiUpdateI(QEIDriver *qeip) { - qeicnt_t cnt; - qeidelta_t delta; - - osalDbgCheckClassI(); - osalDbgCheck(qeip != NULL); - osalDbgAssert((qeip->state == QEI_READY) || (qeip->state == QEI_ACTIVE), - "invalid state"); - - cnt = qei_lld_get_count(qeip); - delta = cnt - qeip->last; - qeip->last = cnt; - - return delta; -} - -#endif /* HAL_USE_QEI == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_rng.c b/ChibiOS_16.1.5/community/os/hal/src/hal_rng.c deleted file mode 100644 index 5ff6d2d..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_rng.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - RNG for ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * Hardware Abstraction Layer for RNG Unit - */ -#include "hal.h" - -#if (HAL_USE_RNG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief RNG Driver initialization. - * - * @init - */ -void rngInit(void) { - rng_lld_init(); -} - -/** - * @brief Initializes the standard part of a @p RNGDriver structure. - * - * @param[out] rngp Pointer to the @p RNGDriver object - * - * @init - */ -void rngObjectInit(RNGDriver *rngp) { - rngp->state = RNG_STOP; - rngp->config = NULL; -#if RNG_USE_MUTUAL_EXCLUSION == TRUE - osalMutexObjectInit(&rngp->mutex); -#endif -#if defined(RNG_DRIVER_EXT_INIT_HOOK) - RNG_DRIVER_EXT_INIT_HOOK(rngp); -#endif -} - -/** - * @brief Configures and activates the RNG peripheral. - * - * @param[in] rngp Pointer to the @p RNGDriver object - * @param[in] config Pointer to the @p RNGConfig object - * @p NULL if the low level driver implementation - * supports a default configuration - * - * @api - */ -void rngStart(RNGDriver *rngp, const RNGConfig *config) { - osalDbgCheck(rngp != NULL); - - osalSysLock(); - osalDbgAssert((rngp->state == RNG_STOP) || (rngp->state == RNG_READY), - "invalid state"); - rngp->config = config; - rng_lld_start(rngp); - rngp->state = RNG_READY; - osalSysUnlock(); -} - -/** - * @brief Deactivates the RNG peripheral. - * - * @param[in] rngp Pointer to the @p RNGDriver object - * - * @api - */ -void rngStop(RNGDriver *rngp) { - osalDbgCheck(rngp != NULL); - - osalSysLock(); - osalDbgAssert((rngp->state == RNG_STOP) || (rngp->state == RNG_READY), - "invalid state"); - rng_lld_stop(rngp); - rngp->state = RNG_STOP; - osalSysUnlock(); -} - -/** - * @brief Write random bytes - * @details Write the request number of bytes.. - * - * @param[in] rngp pointer to the @p RNGDriver object - * @param[in] buf the pointer to the buffer - * @param[in] n number of bytes to send - * @param[in] timeout timeout value - * - * @api - */ -msg_t rngWrite(RNGDriver *rngp, uint8_t *buf, size_t n, systime_t timeout) { - msg_t msg; - osalSysLock(); - msg = rngWriteI(rngp, buf, n, timeout); - osalSysUnlock(); - return msg; -} - -/** - * @brief Write random bytes - * @details Write the request number of bytes.. - * - * @param[in] rngp pointer to the @p RNGDriver object - * @param[in] buf the pointer to the buffer - * @param[in] n number of bytes to send - * @param[in] timeout timeout value - * - * @iclass - */ -msg_t rngWriteI(RNGDriver *rngp, uint8_t *buf, size_t n, systime_t timeout) { - osalDbgCheck((rngp != NULL) && (n > 0U) && (buf != NULL)); - osalDbgAssert(rngp->state == RNG_READY, "not ready"); - return rng_lld_write(rngp, buf, n, timeout); -} - - -#if (RNG_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) -/** - * @brief Gains exclusive access to the RNG unit. - * @details This function tries to gain ownership to the RNG, if the RNG is - * already being used then the invoking thread is queued. - * @pre In order to use this function the option @p RNG_USE_MUTUAL_EXCLUSION - * must be enabled. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @api - */ -void rngAcquireUnit(RNGDriver *rngp) { - osalDbgCheck(rngp != NULL); - - osalMutexLock(&rngp->mutex); -} - -/** - * @brief Releases exclusive access to the RNG unit. - * @pre In order to use this function the option @p RNG_USE_MUTUAL_EXCLUSION - * must be enabled. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @api - */ -void rngReleaseUnit(RNGDriver *rngp) { - osalDbgCheck(rngp != NULL); - - osalMutexUnlock(&rngp->mutex); -} -#endif /* RNG_USE_MUTUAL_EXCLUSION == TRUE */ - -#endif /* HAL_USE_RNG */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_timcap.c b/ChibiOS_16.1.5/community/os/hal/src/hal_timcap.c deleted file mode 100644 index a352490..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_timcap.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file timcap.c - * @brief TIMCAP Driver code. - * - * @addtogroup TIMCAP - * @{ - */ - -#include "hal_timcap.h" - -#if HAL_USE_TIMCAP || defined(__DOXYGEN__) - - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief TIMCAP Driver initialization. - * @note This function is implicitly invoked by @p halInit(), there is - * no need to explicitly initialize the driver. - * - * @init - */ -void timcapInit(void) { - - timcap_lld_init(); -} - -/** - * @brief Initializes the standard part of a @p TIMCAPDriver structure. - * - * @param[out] timcapp pointer to the @p TIMCAPDriver object - * - * @init - */ -void timcapObjectInit(TIMCAPDriver *timcapp) { - - timcapp->state = TIMCAP_STOP; - timcapp->config = NULL; -} - -/** - * @brief Configures and activates the TIMCAP peripheral. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * @param[in] config pointer to the @p TIMCAPConfig object - * - * @api - */ -void timcapStart(TIMCAPDriver *timcapp, const TIMCAPConfig *config) { - - osalDbgCheck((timcapp != NULL) && (config != NULL)); - - osalSysLock(); - osalDbgAssert((timcapp->state == TIMCAP_STOP) || (timcapp->state == TIMCAP_READY), - "invalid state"); - timcapp->config = config; - timcap_lld_start(timcapp); - timcapp->state = TIMCAP_READY; - osalSysUnlock(); -} - -/** - * @brief Deactivates the TIMCAP peripheral. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @api - */ -void timcapStop(TIMCAPDriver *timcapp) { - - osalDbgCheck(timcapp != NULL); - - osalSysLock(); - osalDbgAssert((timcapp->state == TIMCAP_STOP) || (timcapp->state == TIMCAP_READY), - "invalid state"); - timcap_lld_stop(timcapp); - timcapp->state = TIMCAP_STOP; - osalSysUnlock(); -} - -/** - * @brief Enables the input capture. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @api - */ -void timcapEnable(TIMCAPDriver *timcapp) { - - osalDbgCheck(timcapp != NULL); - - osalSysLock(); - osalDbgAssert(timcapp->state == TIMCAP_READY, "invalid state"); - timcap_lld_enable(timcapp); - timcapp->state = TIMCAP_WAITING; - osalSysUnlock(); -} - -/** - * @brief Disables the input capture. - * - * @param[in] timcapp pointer to the @p TIMCAPDriver object - * - * @api - */ -void timcapDisable(TIMCAPDriver *timcapp) { - - osalDbgCheck(timcapp != NULL); - - osalSysLock(); - osalDbgAssert((timcapp->state == TIMCAP_READY) || (timcapp->state == TIMCAP_WAITING) || - (timcapp->state == TIMCAP_ACTIVE) || (timcapp->state == TIMCAP_IDLE), - "invalid state"); - timcap_lld_disable(timcapp); - timcapp->state = TIMCAP_READY; - osalSysUnlock(); -} - -#endif /* HAL_USE_TIMCAP */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_usb_hid.c b/ChibiOS_16.1.5/community/os/hal/src/hal_usb_hid.c deleted file mode 100644 index 56be9b7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_usb_hid.c +++ /dev/null @@ -1,581 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hal_usb_hid.c - * @brief USB HID Driver code. - * - * @addtogroup USB_HID - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_USB_HID == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static uint16_t get_hword(uint8_t *p) { - uint16_t hw; - - hw = (uint16_t)*p++; - hw |= (uint16_t)*p << 8U; - return hw; -} - -/* - * Interface implementation. - */ - -static size_t write(void *ip, const uint8_t *bp, size_t n) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return 0; - } - - return obqWriteTimeout(&((USBHIDDriver *)ip)->obqueue, bp, - n, TIME_INFINITE); -} - -static size_t read(void *ip, uint8_t *bp, size_t n) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return 0; - } - - return ibqReadTimeout(&((USBHIDDriver *)ip)->ibqueue, bp, - n, TIME_INFINITE); -} - -static msg_t put(void *ip, uint8_t b) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return MSG_RESET; - } - - return obqPutTimeout(&((USBHIDDriver *)ip)->obqueue, b, TIME_INFINITE); -} - -static msg_t get(void *ip) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return MSG_RESET; - } - - return ibqGetTimeout(&((USBHIDDriver *)ip)->ibqueue, TIME_INFINITE); -} - -static msg_t putt(void *ip, uint8_t b, systime_t timeout) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return MSG_RESET; - } - - return obqPutTimeout(&((USBHIDDriver *)ip)->obqueue, b, timeout); -} - -static msg_t gett(void *ip, systime_t timeout) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return MSG_RESET; - } - - return ibqGetTimeout(&((USBHIDDriver *)ip)->ibqueue, timeout); -} - -static size_t writet(void *ip, const uint8_t *bp, size_t n, systime_t timeout) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return 0; - } - - return obqWriteTimeout(&((USBHIDDriver *)ip)->obqueue, bp, n, timeout); -} - -static size_t readt(void *ip, uint8_t *bp, size_t n, systime_t timeout) { - - if (usbGetDriverStateI(((USBHIDDriver *)ip)->config->usbp) != USB_ACTIVE) { - return 0; - } - - return ibqReadTimeout(&((USBHIDDriver *)ip)->ibqueue, bp, n, timeout); -} - -static void flush(void *ip) { - - obqFlush(&((USBHIDDriver *)ip)->obqueue); -} - -static const struct USBHIDDriverVMT vmt = { - write, read, put, get, - putt, gett, writet, readt, - flush -}; - -/** - * @brief Notification of empty buffer released into the input buffers queue. - * - * @param[in] bqp the buffers queue pointer. - */ -static void ibnotify(io_buffers_queue_t *bqp) { - USBHIDDriver *uhdp = bqGetLinkX(bqp); - - /* If the USB driver is not in the appropriate state then transactions - must not be started.*/ - if ((usbGetDriverStateI(uhdp->config->usbp) != USB_ACTIVE) || - (uhdp->state != HID_READY)) { - return; - } - - /* Checking if there is already a transaction ongoing on the endpoint.*/ - if (!usbGetReceiveStatusI(uhdp->config->usbp, uhdp->config->int_out)) { - /* Trying to get a free buffer.*/ - uint8_t *buf = ibqGetEmptyBufferI(&uhdp->ibqueue); - if (buf != NULL) { - /* Buffer found, starting a new transaction.*/ - usbStartReceiveI(uhdp->config->usbp, uhdp->config->int_out, - buf, SERIAL_USB_BUFFERS_SIZE); - } - } -} - -/** - * @brief Notification of filled buffer inserted into the output buffers queue. - * - * @param[in] bqp the buffers queue pointer. - */ -static void obnotify(io_buffers_queue_t *bqp) { - size_t n; - USBHIDDriver *uhdp = bqGetLinkX(bqp); - - /* If the USB driver is not in the appropriate state then transactions - must not be started.*/ - if ((usbGetDriverStateI(uhdp->config->usbp) != USB_ACTIVE) || - (uhdp->state != HID_READY)) { - return; - } - - /* Checking if there is already a transaction ongoing on the endpoint.*/ - if (!usbGetTransmitStatusI(uhdp->config->usbp, uhdp->config->int_in)) { - /* Trying to get a full buffer.*/ - uint8_t *buf = obqGetFullBufferI(&uhdp->obqueue, &n); - if (buf != NULL) { - /* Buffer found, starting a new transaction.*/ - usbStartTransmitI(uhdp->config->usbp, uhdp->config->int_in, buf, n); - } - } -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief USB HID Driver initialization. - * @note This function is implicitly invoked by @p halInit(), there is - * no need to explicitly initialize the driver. - * - * @init - */ -void hidInit(void) { -} - -/** - * @brief Initializes a generic full duplex USB HID driver object. - * @details The HW dependent part of the initialization has to be performed - * outside, usually in the hardware initialization code. - * - * @param[out] uhdp pointer to a @p USBHIDDriver structure - * - * @init - */ -void hidObjectInit(USBHIDDriver *uhdp) { - - uhdp->vmt = &vmt; - osalEventObjectInit(&uhdp->event); - uhdp->state = HID_STOP; - ibqObjectInit(&uhdp->ibqueue, uhdp->ib, - USB_HID_BUFFERS_SIZE, USB_HID_BUFFERS_NUMBER, - ibnotify, uhdp); - obqObjectInit(&uhdp->obqueue, uhdp->ob, - USB_HID_BUFFERS_SIZE, USB_HID_BUFFERS_NUMBER, - obnotify, uhdp); -} - -/** - * @brief Configures and starts the driver. - * - * @param[in] uhdp pointer to a @p USBHIDDriver object - * @param[in] config the USB HID driver configuration - * - * @api - */ -void hidStart(USBHIDDriver *uhdp, const USBHIDConfig *config) { - USBDriver *usbp = config->usbp; - - osalDbgCheck(uhdp != NULL); - - osalSysLock(); - osalDbgAssert((uhdp->state == HID_STOP) || (uhdp->state == HID_READY), - "invalid state"); - usbp->in_params[config->int_in - 1U] = uhdp; - usbp->out_params[config->int_out - 1U] = uhdp; - uhdp->config = config; - uhdp->state = HID_READY; - osalSysUnlock(); -} - -/** - * @brief Stops the driver. - * @details Any thread waiting on the driver's queues will be awakened with - * the message @p MSG_RESET. - * - * @param[in] uhdp pointer to a @p USBHIDDriver object - * - * @api - */ -void hidStop(USBHIDDriver *uhdp) { - USBDriver *usbp = uhdp->config->usbp; - - osalDbgCheck(uhdp != NULL); - - osalSysLock(); - osalDbgAssert((uhdp->state == HID_STOP) || (uhdp->state == HID_READY), - "invalid state"); - - /* Driver in stopped state.*/ - usbp->in_params[uhdp->config->int_in - 1U] = NULL; - usbp->out_params[uhdp->config->int_out - 1U] = NULL; - uhdp->state = HID_STOP; - - /* Enforces a disconnection.*/ - hidDisconnectI(uhdp); - osalOsRescheduleS(); - osalSysUnlock(); -} - -/** - * @brief USB device disconnection handler. - * @note If this function is not called from an ISR then an explicit call - * to @p osalOsRescheduleS() in necessary afterward. - * - * @param[in] uhdp pointer to a @p USBHIDDriver object - * - * @iclass - */ -void hidDisconnectI(USBHIDDriver *uhdp) { - - /* Queues reset in order to signal the driver stop to the application.*/ - chnAddFlagsI(uhdp, CHN_DISCONNECTED); - ibqResetI(&uhdp->ibqueue); - obqResetI(&uhdp->obqueue); -} - -/** - * @brief USB device configured handler. - * - * @param[in] uhdp pointer to a @p USBHIDDriver object - * - * @iclass - */ -void hidConfigureHookI(USBHIDDriver *uhdp) { - uint8_t *buf; - - ibqResetI(&uhdp->ibqueue); - obqResetI(&uhdp->obqueue); - chnAddFlagsI(uhdp, CHN_CONNECTED); - - /* Starts the first OUT transaction immediately.*/ - buf = ibqGetEmptyBufferI(&uhdp->ibqueue); - - osalDbgAssert(buf != NULL, "no free buffer"); - - usbStartReceiveI(uhdp->config->usbp, uhdp->config->int_out, - buf, USB_HID_BUFFERS_SIZE); -} - -/** - * @brief Default requests hook. - * @details Applications wanting to use the USB HID driver can use - * this function at the end of the application specific - * requests hook. The HID_* requests handled here do not - * transfer any data to the application. - * The following requests are handled: - * - HID_GET_IDLE. - * - HID_GET_PROTOCOL. - * - HID_SET_REPORT. - * - HID_SET_IDLE. - * - HID_SET_PROTOCOL. - * - USB_REQ_GET_DESCRIPTOR. - * . - * - * @param[in] usbp pointer to the @p USBDriver object - * @return The hook status. - * @retval true Message handled internally. - * @retval false Message not handled. - */ -bool hidRequestsHook(USBDriver *usbp) { - const USBDescriptor *dp; - - if ((usbp->setup[0] & USB_RTYPE_TYPE_MASK) == USB_RTYPE_TYPE_CLASS) { - switch (usbp->setup[1]) { - case HID_GET_IDLE: - usbSetupTransfer(usbp, NULL, 0, NULL); - return true; - case HID_GET_PROTOCOL: - return true; - case HID_SET_REPORT: - usbSetupTransfer(usbp, NULL, 0, NULL); - return true; - case HID_SET_IDLE: - usbSetupTransfer(usbp, NULL, 0, NULL); - return true; - case HID_SET_PROTOCOL: - return true; - default: - return false; - } - } - - /* GET_DESCRIPTOR from interface not handled by default so handle it here */ - if (((usbp->setup[0] & USB_RTYPE_DIR_MASK) == USB_RTYPE_DIR_DEV2HOST) && - ((usbp->setup[0] & USB_RTYPE_RECIPIENT_MASK) == USB_RTYPE_RECIPIENT_INTERFACE)) { - switch (usbp->setup[1]) { - case USB_REQ_GET_DESCRIPTOR: - dp = usbp->config->get_descriptor_cb(usbp, usbp->setup[3], usbp->setup[2], - get_hword(&usbp->setup[4])); - if (dp == NULL) - return false; - - usbSetupTransfer(usbp, (uint8_t *)dp->ud_string, dp->ud_size, NULL); - return true; - default: - return false; - } - } - return false; -} - -/** - * @brief Default data transmitted callback. - * @details The application must use this function as callback for the IN - * data endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep IN endpoint number - */ -void hidDataTransmitted(USBDriver *usbp, usbep_t ep) { - uint8_t *buf; - size_t n; - USBHIDDriver *uhdp = usbp->in_params[ep - 1U]; - - if (uhdp == NULL) { - return; - } - - osalSysLockFromISR(); - - /* Signaling that space is available in the output queue.*/ - chnAddFlagsI(uhdp, CHN_OUTPUT_EMPTY); - - /* Freeing the buffer just transmitted, if it was not a zero size packet.*/ - if (usbp->epc[ep]->in_state->txsize > 0U) { - obqReleaseEmptyBufferI(&uhdp->obqueue); - } - - /* Checking if there is a buffer ready for transmission.*/ - buf = obqGetFullBufferI(&uhdp->obqueue, &n); - - if (buf != NULL) { - /* The endpoint cannot be busy, we are in the context of the callback, - so it is safe to transmit without a check.*/ - usbStartTransmitI(usbp, ep, buf, n); - } - else if ((usbp->epc[ep]->in_state->txsize > 0U) && - ((usbp->epc[ep]->in_state->txsize & - ((size_t)usbp->epc[ep]->in_maxsize - 1U)) == 0U)) { - /* Transmit zero sized packet in case the last one has maximum allowed - size. Otherwise the recipient may expect more data coming soon and - not return buffered data to app. See section 5.8.3 Bulk Transfer - Packet Size Constraints of the USB Specification document.*/ - usbStartTransmitI(usbp, ep, usbp->setup, 0); - - } - else { - /* Nothing to transmit.*/ - } - - osalSysUnlockFromISR(); -} - -/** - * @brief Default data received callback. - * @details The application must use this function as callback for the OUT - * data endpoint. - * - * @param[in] usbp pointer to the @p USBDriver object - * @param[in] ep OUT endpoint number - */ -void hidDataReceived(USBDriver *usbp, usbep_t ep) { - uint8_t *buf; - USBHIDDriver *uhdp = usbp->out_params[ep - 1U]; - - if (uhdp == NULL) { - return; - } - - osalSysLockFromISR(); - - /* Signaling that data is available in the input queue.*/ - chnAddFlagsI(uhdp, CHN_INPUT_AVAILABLE); - - /* Posting the filled buffer in the queue.*/ - ibqPostFullBufferI(&uhdp->ibqueue, - usbGetReceiveTransactionSizeX(uhdp->config->usbp, ep)); - - /* The endpoint cannot be busy, we are in the context of the callback, - so a packet is in the buffer for sure. Trying to get a free buffer - for the next transaction.*/ - buf = ibqGetEmptyBufferI(&uhdp->ibqueue); - if (buf != NULL) { - /* Buffer found, starting a new transaction.*/ - usbStartReceiveI(uhdp->config->usbp, ep, buf, USB_HID_BUFFERS_SIZE); - } - - osalSysUnlockFromISR(); -} - -/** - * @brief Write HID Report - * @details The function writes data from a buffer to an output queue. The - * operation completes when the specified amount of data has been - * transferred or if the queue has been reset. - * - * @param[in] uhdp pointer to the @p USBHIDDriver object - * @param[in] bp pointer to the report data buffer - * @param[in] n the maximum amount of data to be transferred, the - * value 0 is reserved - * @return The number of bytes effectively transferred. - * @retval 0 if a timeout occurred. - * - * @api - */ -size_t hidWriteReport(USBHIDDriver *uhdp, uint8_t *bp, size_t n) { - size_t val; - - val = uhdp->vmt->write(uhdp, bp, n); - - if (val > 0) - uhdp->vmt->flush(uhdp); - - return val; -} - -/** - * @brief Write HID report with timeout - * @details The function writes data from a buffer to an output queue. The - * operation completes when the specified amount of data has been - * transferred or after the specified timeout or if the queue has - * been reset. - * - * @param[in] uhdp pointer to the @p USBHIDDriver object - * @param[in] bp pointer to the report data buffer - * @param[in] n the maximum amount of data to be transferred, the - * value 0 is reserved - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_IMMEDIATE immediate timeout. - * - @a TIME_INFINITE no timeout. - * . - * @return The number of bytes effectively transferred. - * @retval 0 if a timeout occurred. - * - * @api - */ -size_t hidWriteReportt(USBHIDDriver *uhdp, uint8_t *bp, size_t n, systime_t timeout) { - size_t val; - - val = uhdp->vmt->writet(uhdp, bp, n, timeout); - - if (val > 0) - uhdp->vmt->flush(uhdp); - - return val; -} - -/** - * @brief Read HID report - * @details The function reads data from an input queue into a buffer. - * The operation completes when the specified amount of data has been - * transferred or if the queue has been reset. - * - * @param[in] uhdp pointer to the @p input_buffers_queue_t object - * @param[out] bp pointer to the data buffer - * @param[in] n the maximum amount of data to be transferred, the - * value 0 is reserved - * @return The number of bytes effectively transferred. - * @retval 0 if a timeout occurred. - * - * @api - */ -size_t hidReadReport(USBHIDDriver *uhdp, uint8_t *bp, size_t n) { - - return uhdp->vmt->read(uhdp, bp, n); -} - -/** - * @brief Read HID report with timeout - * @details The function reads data from an input queue into a buffer. - * The operation completes when the specified amount of data has been - * transferred or after the specified timeout or if the queue has - * been reset. - * - * @param[in] uhdp pointer to the @p input_buffers_queue_t object - * @param[out] bp pointer to the data buffer - * @param[in] n the maximum amount of data to be transferred, the - * value 0 is reserved - * @param[in] timeout the number of ticks before the operation timeouts, - * the following special values are allowed: - * - @a TIME_IMMEDIATE immediate timeout. - * - @a TIME_INFINITE no timeout. - * . - * @return The number of bytes effectively transferred. - * @retval 0 if a timeout occurred. - * - * @api - */ -size_t hidReadReportt(USBHIDDriver *uhdp, uint8_t *bp, size_t n, systime_t timeout) { - - return uhdp->vmt->readt(uhdp, bp, n, timeout); -} - -#endif /* HAL_USE_USB_HID == TRUE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/src/hal_usbh.c b/ChibiOS_16.1.5/community/os/hal/src/hal_usbh.c deleted file mode 100644 index 1caa183..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/hal_usbh.c +++ /dev/null @@ -1,1395 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_USBH - -#include "usbh/dev/hub.h" -#include "usbh/internal.h" -#include - -#if USBH_DEBUG_ENABLE_TRACE -#define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define udbgf(f, ...) do {} while(0) -#define udbg(f, ...) do {} while(0) -#endif - -#if USBH_DEBUG_ENABLE_INFO -#define uinfof(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uinfo(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uinfof(f, ...) do {} while(0) -#define uinfo(f, ...) do {} while(0) -#endif - -#if USBH_DEBUG_ENABLE_WARNINGS -#define uwarnf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uwarn(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uwarnf(f, ...) do {} while(0) -#define uwarn(f, ...) do {} while(0) -#endif - -#if USBH_DEBUG_ENABLE_ERRORS -#define uerrf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uerr(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uerrf(f, ...) do {} while(0) -#define uerr(f, ...) do {} while(0) -#endif - -#if STM32_USBH_USE_OTG1 -USBHDriver USBHD1; -#endif -#if STM32_USBH_USE_OTG2 -USBHDriver USBHD2; -#endif - - -static void _classdriver_process_device(usbh_device_t *dev); -static bool _classdriver_load(usbh_device_t *dev, uint8_t class, - uint8_t subclass, uint8_t protocol, uint8_t *descbuff, uint16_t rem); - - -/*===========================================================================*/ -/* Checks. */ -/*===========================================================================*/ - -static inline void _check_dev(usbh_device_t *dev) { - osalDbgCheck(dev); - //TODO: add more checks. -} - -static inline void _check_ep(usbh_ep_t *ep) { - osalDbgCheck(ep != 0); - _check_dev(ep->device); - osalDbgCheck(ep->type <= 3); - //TODO: add more checks. -} - -static inline void _check_urb(usbh_urb_t *urb) { - osalDbgCheck(urb != 0); - _check_ep(urb->ep); - osalDbgCheck((urb->buff != NULL) || (urb->requestedLength == 0)); - //TODO: add more checks. -} - -/*===========================================================================*/ -/* Main driver API. */ -/*===========================================================================*/ - -void usbhObjectInit(USBHDriver *usbh) { - memset(usbh, 0, sizeof(*usbh)); - usbh->status = USBH_STATUS_STOPPED; -#if HAL_USBH_USE_HUB - INIT_LIST_HEAD(&usbh->hubs); - _usbhub_port_object_init(&usbh->rootport, usbh, 0, 1); -#else - _usbhub_port_object_init(&usbh->rootport, usbh, 1); -#endif -} - -void usbhInit(void) { -#if HAL_USBH_USE_HUB - uint8_t i; - for (i = 0; i < HAL_USBHHUB_MAX_INSTANCES; i++) { - usbhhubObjectInit(&USBHHUBD[i]); - } -#endif - usbh_lld_init(); -} - -void usbhStart(USBHDriver *usbh) { - usbDbgInit(usbh); - - osalSysLock(); - osalDbgAssert((usbh->status == USBH_STATUS_STOPPED) || (usbh->status == USBH_STATUS_STARTED), - "invalid state"); - usbh_lld_start(usbh); - usbh->status = USBH_STATUS_STARTED; - osalOsRescheduleS(); - osalSysUnlock(); -} - - -void usbhStop(USBHDriver *usbh) { - //TODO: implement - (void)usbh; -} -void usbhSuspend(USBHDriver *usbh) { - //TODO: implement - (void)usbh; -} -void usbhResume(USBHDriver *usbh) { - //TODO: implement - (void)usbh; -} - -/*===========================================================================*/ -/* Endpoint API. */ -/*===========================================================================*/ - -void usbhEPObjectInit(usbh_ep_t *ep, usbh_device_t *dev, const usbh_endpoint_descriptor_t *desc) { - osalDbgCheck(ep); - _check_dev(dev); - osalDbgCheck(desc); - - memset(ep, 0, sizeof(*ep)); - ep->device = dev; - ep->wMaxPacketSize = desc->wMaxPacketSize; - ep->address = desc->bEndpointAddress & 0x0F; - ep->type = (usbh_eptype_t) (desc->bmAttributes & 0x03); - if (ep->type != USBH_EPTYPE_CTRL) { - ep->in = (desc->bEndpointAddress & 0x80) ? TRUE : FALSE; - } - ep->bInterval = desc->bInterval; - - /* low-level part */ - usbh_lld_ep_object_init(ep); - - ep->status = USBH_EPSTATUS_CLOSED; -} - - -static void _ep0_object_init(usbh_device_t *dev, uint16_t wMaxPacketSize) { - const usbh_endpoint_descriptor_t ep0_descriptor = { - 7, //bLength - 5, //bDescriptorType - 0, //bEndpointAddress - 0, //bmAttributes - wMaxPacketSize, - 0, //bInterval - }; - usbhEPObjectInit(&dev->ctrl, dev, &ep0_descriptor); - usbhEPSetName(&dev->ctrl, "DEV[CTRL]"); -} - - -/*===========================================================================*/ -/* URB API. */ -/*===========================================================================*/ - -void usbhURBObjectInit(usbh_urb_t *urb, usbh_ep_t *ep, usbh_completion_cb callback, - void *user, void *buff, uint32_t len) { - - osalDbgCheck(urb != 0); - _check_ep(ep); - - /* initialize the common part: */ - urb->ep = ep; - urb->callback = callback; - urb->userData = user; - urb->buff = buff; - urb->requestedLength = len; - urb->actualLength = 0; - urb->status = USBH_URBSTATUS_INITIALIZED; - urb->waitingThread = 0; - urb->abortingThread = 0; - - /* initialize the ll part: */ - usbh_lld_urb_object_init(urb); -} - -void usbhURBObjectResetI(usbh_urb_t *urb) { - osalDbgAssert(!usbhURBIsBusy(urb), "invalid status"); - - osalDbgCheck((urb->waitingThread == 0) && (urb->abortingThread == 0)); - - urb->actualLength = 0; - urb->status = USBH_URBSTATUS_INITIALIZED; - - /* reset the ll part: */ - usbh_lld_urb_object_reset(urb); -} - -void usbhURBSubmitI(usbh_urb_t *urb) { - osalDbgCheckClassI(); - _check_urb(urb); - osalDbgAssert(urb->status == USBH_URBSTATUS_INITIALIZED, "invalid status"); - usbh_ep_t *const ep = urb->ep; - if (ep->status == USBH_EPSTATUS_HALTED) { - _usbh_urb_completeI(urb, USBH_URBSTATUS_STALL); - return; - } - if (ep->status != USBH_EPSTATUS_OPEN) { - _usbh_urb_completeI(urb, USBH_URBSTATUS_DISCONNECTED); - return; - } - if (!(usbhDeviceGetPort(ep->device)->status & USBH_PORTSTATUS_ENABLE)) { - _usbh_urb_completeI(urb, USBH_URBSTATUS_DISCONNECTED); - return; - } - urb->status = USBH_URBSTATUS_PENDING; - usbh_lld_urb_submit(urb); -} - -bool _usbh_urb_abortI(usbh_urb_t *urb, usbh_urbstatus_t status) { - osalDbgCheckClassI(); - _check_urb(urb); - - switch (urb->status) { -/* case USBH_URBSTATUS_UNINITIALIZED: - * case USBH_URBSTATUS_INITIALIZED: - * case USBH_URBSTATUS_ERROR: - * case USBH_URBSTATUS_TIMEOUT: - * case USBH_URBSTATUS_CANCELLED: - * case USBH_URBSTATUS_STALL: - * case USBH_URBSTATUS_DISCONNECTED: - * case USBH_URBSTATUS_OK: */ - default: - /* already finished */ - _usbh_urb_completeI(urb, status); - return TRUE; - -// case USBH_URBSTATUS_QUEUED: - case USBH_URBSTATUS_PENDING: - return usbh_lld_urb_abort(urb, status); - } -} - -void _usbh_urb_abort_and_waitS(usbh_urb_t *urb, usbh_urbstatus_t status) { - osalDbgCheckClassS(); - _check_urb(urb); - - if (_usbh_urb_abortI(urb, status) == FALSE) { - uwarn("URB wasn't aborted immediately, suspend"); - osalThreadSuspendS(&urb->abortingThread); - urb->abortingThread = 0; - } else { - osalOsRescheduleS(); - } - uwarn("URB aborted"); -} - -bool usbhURBCancelI(usbh_urb_t *urb) { - return _usbh_urb_abortI(urb, USBH_URBSTATUS_CANCELLED); -} - -void usbhURBCancelAndWaitS(usbh_urb_t *urb) { - _usbh_urb_abort_and_waitS(urb, USBH_URBSTATUS_CANCELLED); -} - -msg_t usbhURBWaitTimeoutS(usbh_urb_t *urb, systime_t timeout) { - msg_t ret; - - osalDbgCheckClassS(); - _check_urb(urb); - - switch (urb->status) { - case USBH_URBSTATUS_INITIALIZED: - case USBH_URBSTATUS_PENDING: -// case USBH_URBSTATUS_QUEUED: - ret = osalThreadSuspendTimeoutS(&urb->waitingThread, timeout); - urb->waitingThread = 0; - break; - - case USBH_URBSTATUS_OK: - ret = MSG_OK; - osalOsRescheduleS(); - break; - -/* case USBH_URBSTATUS_UNINITIALIZED: - * case USBH_URBSTATUS_ERROR: - * case USBH_URBSTATUS_TIMEOUT: - * case USBH_URBSTATUS_CANCELLED: - * case USBH_URBSTATUS_STALL: - * case USBH_URBSTATUS_DISCONNECTED: */ - default: - ret = MSG_RESET; - osalOsRescheduleS(); - break; - } - return ret; -} - -msg_t usbhURBSubmitAndWaitS(usbh_urb_t *urb, systime_t timeout) { - msg_t ret; - - osalDbgCheckClassS(); - _check_urb(urb); - - usbhURBSubmitI(urb); - ret = usbhURBWaitTimeoutS(urb, timeout); - if (ret == MSG_TIMEOUT) - _usbh_urb_abort_and_waitS(urb, USBH_URBSTATUS_TIMEOUT); - - return ret; -} - -static inline msg_t _wakeup_message(usbh_urbstatus_t status) { - if (status == USBH_URBSTATUS_OK) return MSG_OK; - if (status == USBH_URBSTATUS_TIMEOUT) return MSG_TIMEOUT; - return MSG_RESET; -} - -void _usbh_urb_completeI(usbh_urb_t *urb, usbh_urbstatus_t status) { - osalDbgCheckClassI(); - _check_urb(urb); - urb->status = status; - osalThreadResumeI(&urb->waitingThread, _wakeup_message(status)); - osalThreadResumeI(&urb->abortingThread, MSG_RESET); - if (urb->callback) - urb->callback(urb); -} - -/*===========================================================================*/ -/* Synchronous API. */ -/*===========================================================================*/ - -usbh_urbstatus_t usbhBulkTransfer(usbh_ep_t *ep, - void *data, - uint32_t len, - uint32_t *actual_len, - systime_t timeout) { - - osalDbgCheck(ep != NULL); - osalDbgCheck((data != NULL) || (len == 0)); - osalDbgAssert(ep->type == USBH_EPTYPE_BULK, "wrong ep"); - - usbh_urb_t urb; - usbhURBObjectInit(&urb, ep, 0, 0, data, len); - - osalSysLock(); - usbhURBSubmitAndWaitS(&urb, timeout); - osalSysUnlock(); - - if (actual_len != NULL) - *actual_len = urb.actualLength; - - return urb.status; -} - -usbh_urbstatus_t usbhControlRequestExtended(usbh_device_t *dev, - const usbh_control_request_t *req, - uint8_t *buff, - uint32_t *actual_len, - systime_t timeout) { - - _check_dev(dev); - osalDbgCheck(req != NULL); - - usbh_urb_t urb; - - usbhURBObjectInit(&urb, &dev->ctrl, 0, 0, buff, req->wLength); - urb.setup_buff = req; - - osalSysLock(); - usbhURBSubmitAndWaitS(&urb, timeout); - osalSysUnlock(); - - if (actual_len != NULL) - *actual_len = urb.actualLength; - - return urb.status; -} - -usbh_urbstatus_t usbhControlRequest(usbh_device_t *dev, - uint8_t bmRequestType, - uint8_t bRequest, - uint16_t wValue, - uint16_t wIndex, - uint16_t wLength, - uint8_t *buff) { - - const USBH_DEFINE_BUFFER(usbh_control_request_t, req) = { - bmRequestType, - bRequest, - wValue, - wIndex, - wLength - }; - return usbhControlRequestExtended(dev, &req, buff, NULL, MS2ST(1000)); -} - -/*===========================================================================*/ -/* Standard request helpers. */ -/*===========================================================================*/ - -#define USBH_GET_DESCRIPTOR(type, value, index) \ - USBH_STANDARDIN(type, \ - USBH_REQ_GET_DESCRIPTOR, \ - value, \ - index) \ - -#define USBH_GETDEVICEDESCRIPTOR \ - USBH_GET_DESCRIPTOR(USBH_REQTYPE_DEVICE, (USBH_DT_DEVICE << 8) | 0, 0) - -#define USBH_GETCONFIGURATIONDESCRIPTOR(index) \ - USBH_GET_DESCRIPTOR(USBH_REQTYPE_DEVICE, (USBH_DT_CONFIG << 8) | index, 0) - -#define USBH_GETSTRINGDESCRIPTOR(index, langID) \ - USBH_GET_DESCRIPTOR(USBH_REQTYPE_DEVICE, (USBH_DT_STRING << 8) | index, langID) - -bool usbhStdReqGetDeviceDescriptor(usbh_device_t *dev, - uint16_t wLength, - uint8_t *buf) { - usbh_device_descriptor_t *desc; - usbh_urbstatus_t ret = usbhControlRequest(dev, USBH_GETDEVICEDESCRIPTOR, wLength, buf); - desc = (usbh_device_descriptor_t *)buf; - if ((ret != USBH_URBSTATUS_OK) - || (desc->bLength != USBH_DT_DEVICE_SIZE) - || (desc->bDescriptorType != USBH_DT_DEVICE)) { - return HAL_FAILED; - } - return HAL_SUCCESS; -} - -bool usbhStdReqGetConfigurationDescriptor(usbh_device_t *dev, - uint8_t index, - uint16_t wLength, - uint8_t *buf) { - usbh_urbstatus_t ret = usbhControlRequest(dev, USBH_GETCONFIGURATIONDESCRIPTOR(index), wLength, buf); - usbh_config_descriptor_t *const desc = (usbh_config_descriptor_t *)buf; - if ((ret != USBH_URBSTATUS_OK) - || (desc->bLength < USBH_DT_CONFIG_SIZE) - || (desc->bDescriptorType != USBH_DT_CONFIG)) { - return HAL_FAILED; - } - return HAL_SUCCESS; -} - -bool usbhStdReqGetStringDescriptor(usbh_device_t *dev, - uint8_t index, - uint16_t langID, - uint16_t wLength, - uint8_t *buf) { - - osalDbgAssert(wLength >= USBH_DT_STRING_SIZE, "wrong size"); - usbh_string_descriptor_t *desc = (usbh_string_descriptor_t *)buf; - usbh_urbstatus_t ret = usbhControlRequest(dev, USBH_GETSTRINGDESCRIPTOR(index, langID), wLength, buf); - if ((ret != USBH_URBSTATUS_OK) - || (desc->bLength < USBH_DT_STRING_SIZE) - || (desc->bDescriptorType != USBH_DT_STRING)) { - return HAL_FAILED; - } - return HAL_SUCCESS; -} - - - -#define USBH_SET_INTERFACE(interface, alt) \ - USBH_STANDARDOUT(USBH_REQTYPE_INTERFACE, \ - USBH_REQ_SET_INTERFACE, \ - alt, \ - interface) \ - -#define USBH_GET_INTERFACE(interface) \ - USBH_STANDARDIN(USBH_REQTYPE_INTERFACE, \ - USBH_REQ_GET_INTERFACE, \ - 0, \ - interface) \ - -bool usbhStdReqSetInterface(usbh_device_t *dev, - uint8_t bInterfaceNumber, - uint8_t bAlternateSetting) { - - usbh_urbstatus_t ret = usbhControlRequest(dev, USBH_SET_INTERFACE(bInterfaceNumber, bAlternateSetting), 0, NULL); - if (ret != USBH_URBSTATUS_OK) - return HAL_FAILED; - - return HAL_SUCCESS; -} - -bool usbhStdReqGetInterface(usbh_device_t *dev, - uint8_t bInterfaceNumber, - uint8_t *bAlternateSetting) { - - USBH_DEFINE_BUFFER(uint8_t, alt); - - usbh_urbstatus_t ret = usbhControlRequest(dev, USBH_GET_INTERFACE(bInterfaceNumber), 1, &alt); - if (ret != USBH_URBSTATUS_OK) - return HAL_FAILED; - - *bAlternateSetting = alt; - return HAL_SUCCESS; -} - - -/*===========================================================================*/ -/* Device-related functions. */ -/*===========================================================================*/ - -static uint8_t _find_address(USBHDriver *host) { - uint8_t addr, i, j; - for (i = 0; i < sizeof_array(host->address_bitmap); i++) { - addr = host->address_bitmap[i]; - for (j = 0; j < 8; j++) { - if ((addr & (1 << j)) == 0) { - //found: - addr = i * 8 + j + 1; - host->address_bitmap[i] |= (1 << j); - return addr; - } - } - } - return 0; -} - -static void _free_address(USBHDriver *host, uint8_t addr) { - uinfof("Free address %d", addr); - host->address_bitmap[addr / 8] &= ~(1 << ((addr - 1) & 7)); -} - -static void _device_initialize(usbh_device_t *dev, usbh_devspeed_t speed) { - dev->address = 0; - dev->speed = speed; - dev->status = USBH_DEVSTATUS_DEFAULT; - dev->langID0 = 0; - dev->keepFullCfgDesc = 0; - _ep0_object_init(dev, 64); -} - -static bool _device_setaddress(usbh_device_t *dev, uint8_t address) { - usbh_urbstatus_t ret = usbhControlRequest(dev, - USBH_STANDARDOUT(USBH_REQTYPE_DEVICE, USBH_REQ_SET_ADDRESS, address, 0), - 0, - 0); - if (ret != USBH_URBSTATUS_OK) - return HAL_FAILED; - - dev->address = address; - return HAL_SUCCESS; -} - -static inline bool _device_read_basic_cfgdesc(usbh_device_t *dev, uint8_t bConfiguration) { - /* get configuration descriptor */ - return usbhStdReqGetConfigurationDescriptor(dev, bConfiguration, - sizeof(dev->basicConfigDesc), (uint8_t *)&dev->basicConfigDesc); -} - -static void _device_read_full_cfgdesc(usbh_device_t *dev, uint8_t bConfiguration) { - _check_dev(dev); - - uint8_t i; - - if (dev->fullConfigurationDescriptor != NULL) { - chHeapFree(dev->fullConfigurationDescriptor); - } - - dev->fullConfigurationDescriptor = - (uint8_t *)chHeapAlloc(0, dev->basicConfigDesc.wTotalLength); - - if (!dev->fullConfigurationDescriptor) - return; - - for (i = 0; i < 3; i++) { - if (usbhStdReqGetConfigurationDescriptor(dev, bConfiguration, - dev->basicConfigDesc.wTotalLength, - dev->fullConfigurationDescriptor) == HAL_SUCCESS) { - return; - } - osalThreadSleepMilliseconds(200); - } - - /* error */ - chHeapFree(dev->fullConfigurationDescriptor); - dev->fullConfigurationDescriptor = NULL; -} - -static void _device_free_full_cfgdesc(usbh_device_t *dev) { - osalDbgCheck(dev); - if (dev->fullConfigurationDescriptor != NULL) { - chHeapFree(dev->fullConfigurationDescriptor); - dev->fullConfigurationDescriptor = NULL; - } -} - - -#define USBH_SET_CONFIGURATION(type, value, index) \ - USBH_STANDARDOUT(type, \ - USBH_REQ_SET_CONFIGURATION, \ - value, \ - index) \ - -#define USBH_SETDEVICECONFIGURATION(index) \ - USBH_SET_CONFIGURATION(USBH_REQTYPE_DEVICE, index, 0) - - -static bool _device_set_configuration(usbh_device_t *dev, uint8_t configuration) { - usbh_urbstatus_t ret = usbhControlRequest(dev, - USBH_SETDEVICECONFIGURATION(configuration), - 0, - 0); - if (ret != USBH_URBSTATUS_OK) - return HAL_FAILED; - return HAL_SUCCESS; -} - -static bool _device_configure(usbh_device_t *dev, uint8_t bConfiguration) { - uint8_t i; - - uinfof("Reading basic configuration descriptor %d", bConfiguration); - for (i = 0; i < 3; i++) { - if (!_device_read_basic_cfgdesc(dev, bConfiguration)) - break; - } - - if (i == 3) { - uerrf("Could not read basic configuration descriptor %d; " - "won't configure device", bConfiguration); - return HAL_FAILED; - } - - uinfof("Selecting configuration %d", bConfiguration); - for (i = 0; i < 3; i++) { - if (!_device_set_configuration(dev, dev->basicConfigDesc.bConfigurationValue)) { - /* TODO: check if correctly configured using GET_CONFIGURATION */ - dev->status = USBH_DEVSTATUS_CONFIGURED; - dev->bConfiguration = bConfiguration; - - uinfo("Device configured."); - return HAL_SUCCESS; - } - } - - return HAL_FAILED; -} - -static bool _device_enumerate(usbh_device_t *dev) { - - uinfo("Enumerate."); - uinfo("Get first 8 bytes of device descriptor"); - - /* get first 8 bytes of device descriptor */ - if (usbhStdReqGetDeviceDescriptor(dev, 8, (uint8_t *)&dev->devDesc)) { - uerr("Error"); - return HAL_FAILED; - } - - uinfof("Configure bMaxPacketSize0 = %d", dev->devDesc.bMaxPacketSize0); - /* configure EP0 wMaxPacketSize */ - usbhEPClose(&dev->ctrl); - _ep0_object_init(dev, dev->devDesc.bMaxPacketSize0); - usbhEPOpen(&dev->ctrl); - - uint8_t addr = _find_address(dev->host); - if (addr == 0) { - uerr("No free addresses found"); - return HAL_FAILED; - } - - /* set device address */ - uinfof("Set device address: %d", addr); - if (_device_setaddress(dev, addr)) { - uerr("Error"); - _free_address(dev->host, addr); - return HAL_FAILED; - } - - /* update EP because of the address change */ - usbhEPClose(&dev->ctrl); - _ep0_object_init(dev, dev->devDesc.bMaxPacketSize0); - usbhEPOpen(&dev->ctrl); - - uinfof("Wait stabilization..."); - osalThreadSleepMilliseconds(HAL_USBH_DEVICE_ADDRESS_STABILIZATION); - - /* address is set */ - dev->status = USBH_DEVSTATUS_ADDRESS; - - uinfof("Get full device desc"); - /* get full device descriptor */ - if (usbhStdReqGetDeviceDescriptor(dev, sizeof(dev->devDesc), - (uint8_t *)&dev->devDesc)) { - uerr("Error"); - _device_setaddress(dev, 0); - _free_address(dev->host, addr); - return HAL_FAILED; - } - - uinfof("Enumeration finished."); - return HAL_SUCCESS; -} - -#if USBH_DEBUG_ENABLE && USBH_DEBUG_ENABLE_INFO -void usbhDevicePrintInfo(usbh_device_t *dev) { - USBH_DEFINE_BUFFER(char, str[64]); - usbh_device_descriptor_t *const desc = &dev->devDesc; - - uinfo("----- Device info -----"); - uinfo("Device descriptor:"); - uinfof("\tUSBSpec=%04x, #configurations=%d, langID0=%04x", - desc->bcdUSB, - desc->bNumConfigurations, - dev->langID0); - - uinfof("\tClass=%02x, Subclass=%02x, Protocol=%02x", - desc->bDeviceClass, - desc->bDeviceSubClass, - desc->bDeviceProtocol); - - uinfof("\tVID=%04x, PID=%04x, Release=%04x", - desc->idVendor, - desc->idProduct, - desc->bcdDevice); - - if (dev->langID0) { - usbhDeviceReadString(dev, str, sizeof(str), desc->iManufacturer, dev->langID0); - uinfof("\tManufacturer: %s", str); - usbhDeviceReadString(dev, str, sizeof(str), desc->iProduct, dev->langID0); - uinfof("\tProduct: %s", str); - usbhDeviceReadString(dev, str, sizeof(str), desc->iSerialNumber, dev->langID0); - uinfof("\tSerial Number: %s", str); - } - - if (dev->status == USBH_DEVSTATUS_CONFIGURED) { - uinfo("Configuration descriptor (partial):"); - usbh_config_descriptor_t *const cfg = &dev->basicConfigDesc; - uinfof("\tbConfigurationValue=%d, Length=%d, #interfaces=%d", - cfg->bConfigurationValue, - cfg->wTotalLength, - cfg->bNumInterfaces); - - uinfof("\tCurrent=%dmA", cfg->bMaxPower * 2); - uinfof("\tSelfPowered=%d, RemoteWakeup=%d", - cfg->bmAttributes & 0x40 ? 1 : 0, - cfg->bmAttributes & 0x20 ? 1 : 0); - if (dev->langID0) { - usbhDeviceReadString(dev, str, sizeof(str), cfg->iConfiguration, dev->langID0); - uinfof("\tName: %s", str); - } - } - - uinfo("----- End Device info -----"); - -} - -void usbhDevicePrintConfiguration(const uint8_t *descriptor, uint16_t rem) { - generic_iterator_t iep, icfg, ics; - if_iterator_t iif; - - uinfo("----- Configuration info -----"); - uinfo("Configuration descriptor:"); - cfg_iter_init(&icfg, descriptor, rem); - const usbh_config_descriptor_t *const cfgdesc = cfg_get(&icfg); - uinfof("Configuration %d, #IFs=%d", cfgdesc->bConfigurationValue, cfgdesc->bNumInterfaces); - - for (if_iter_init(&iif, &icfg); iif.valid; if_iter_next(&iif)) { - const usbh_interface_descriptor_t *const ifdesc = if_get(&iif); - - uinfof(" Interface %d, alt=%d, #EPs=%d, " - "Class=%02x, Subclass=%02x, Protocol=%02x", - ifdesc->bInterfaceNumber, ifdesc->bAlternateSetting, ifdesc->bNumEndpoints, - ifdesc->bInterfaceClass, ifdesc->bInterfaceSubClass, ifdesc->bInterfaceProtocol); - - for (cs_iter_init(&ics, (generic_iterator_t *)&iif); ics.valid; cs_iter_next(&ics)) { - uinfof(" Class-Specific descriptor, Length=%d, Type=%02x", - ics.curr[0], ics.curr[1]); - } - - for (ep_iter_init(&iep, &iif); iep.valid; ep_iter_next(&iep)) { - const usbh_endpoint_descriptor_t *const epdesc = ep_get(&iep); - - uinfof(" Endpoint descriptor, Address=%02x, Type=%d, MaxPacket=%d, Interval=%d", - epdesc->bEndpointAddress, - epdesc->bmAttributes & 3, - epdesc->wMaxPacketSize, - epdesc->bInterval); - - for (cs_iter_init(&ics, &iep); ics.valid; cs_iter_next(&ics)) { - uinfof(" Class-Specific descriptor, Length=%d, Type=%02x", - ics.curr[0], ics.curr[1]); - } - } - } - uinfo("----- End Configuration info -----"); -} -#endif - -bool usbhDeviceReadString(usbh_device_t *dev, char *dest, uint8_t size, - uint8_t index, uint16_t langID) { - - usbh_string_descriptor_t *const desc = (usbh_string_descriptor_t *)dest; - osalDbgAssert(size >= 2, "wrong size"); - - *dest = 0; - if (index == 0) - return HAL_SUCCESS; - if (usbhStdReqGetStringDescriptor(dev, index, langID, size, (uint8_t *)dest)) - return HAL_FAILED; - if (desc->bLength & 1) - return HAL_FAILED; - if (desc->bLength <= 2) - return HAL_SUCCESS; - - uint8_t nchars = desc->bLength / 2; /* including the trailing 0 */ - if (size < nchars) - nchars = size; - - char *src = (char *)&desc->wData[0]; - while (--nchars) { - *dest++ = *src; - src += 2; - } - *dest = 0; - return HAL_SUCCESS; -} - - - - -/*===========================================================================*/ -/* Port processing functions. */ -/*===========================================================================*/ - -static void _port_connected(usbh_port_t *port); - -static void _port_reset(usbh_port_t *port) { - usbhhubControlRequest(port->device.host, -#if HAL_USBH_USE_HUB - port->hub, -#endif - USBH_REQTYPE_OUT | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER, - USBH_REQ_SET_FEATURE, - USBH_PORT_FEAT_RESET, - port->number, - 0, - 0); -} - -static void _port_update_status(usbh_port_t *port) { - uint32_t stat; - if (usbhhubControlRequest(port->device.host, -#if HAL_USBH_USE_HUB - port->hub, -#endif - USBH_REQTYPE_IN | USBH_REQTYPE_CLASS | USBH_REQTYPE_OTHER, - USBH_REQ_GET_STATUS, - 0, - port->number, - 4, - (uint8_t *)&stat) != USBH_URBSTATUS_OK) { - return; - } - port->status = stat & 0xffff; - port->c_status |= stat >> 16; -} - -static void _port_process_status_change(usbh_port_t *port) { - - _port_update_status(port); - - if (port->c_status & USBH_PORTSTATUS_C_CONNECTION) { - /* port connected status changed */ - port->c_status &= ~USBH_PORTSTATUS_C_CONNECTION; - usbhhubClearFeaturePort(port, USBH_PORT_FEAT_C_CONNECTION); - if ((port->status & (USBH_PORTSTATUS_CONNECTION | USBH_PORTSTATUS_ENABLE)) - == USBH_PORTSTATUS_CONNECTION) { - if (port->device.status != USBH_DEVSTATUS_DISCONNECTED) { - _usbh_port_disconnected(port); - } - - /* connected, disabled */ - _port_connected(port); - } else { - /* disconnected */ - _usbh_port_disconnected(port); - } - } - - if (port->c_status & USBH_PORTSTATUS_C_RESET) { - port->c_status &= ~USBH_PORTSTATUS_C_RESET; - usbhhubClearFeaturePort(port, USBH_PORT_FEAT_C_RESET); - } - - if (port->c_status & USBH_PORTSTATUS_C_ENABLE) { - port->c_status &= ~USBH_PORTSTATUS_C_ENABLE; - usbhhubClearFeaturePort(port, USBH_PORT_FEAT_C_ENABLE); - } - - if (port->c_status & USBH_PORTSTATUS_C_OVERCURRENT) { - port->c_status &= ~USBH_PORTSTATUS_C_OVERCURRENT; - usbhhubClearFeaturePort(port, USBH_PORT_FEAT_C_OVERCURRENT); - } - - if (port->c_status & USBH_PORTSTATUS_C_SUSPEND) { - port->c_status &= ~USBH_PORTSTATUS_C_SUSPEND; - usbhhubClearFeaturePort(port, USBH_PORT_FEAT_C_SUSPEND); - } - -} - - -static void _port_connected(usbh_port_t *port) { - /* connected */ - - systime_t start; - uint8_t i; - uint8_t retries; - usbh_devspeed_t speed; - USBH_DEFINE_BUFFER(usbh_string_descriptor_t, strdesc); - - uinfof("Port %d connected, wait debounce...", port->number); - - port->device.status = USBH_DEVSTATUS_ATTACHED; - - /* wait for attach de-bounce */ - osalThreadSleepMilliseconds(HAL_USBH_PORT_DEBOUNCE_TIME); - - /* check disconnection */ - _port_update_status(port); - if (port->c_status & USBH_PORTSTATUS_C_CONNECTION) { - /* connection state changed; abort */ - goto abort; - } - - port->device.status = USBH_DEVSTATUS_CONNECTED; - retries = 3; - -reset: - for (i = 0; i < 3; i++) { - uinfo("Try reset..."); - port->c_status &= ~(USBH_PORTSTATUS_C_RESET | USBH_PORTSTATUS_C_ENABLE); - _port_reset(port); - osalThreadSleepMilliseconds(20); /* give it some time to reset (min. 10ms) */ - start = osalOsGetSystemTimeX(); - while (TRUE) { - _port_update_status(port); - - /* check for disconnection */ - if (port->c_status & USBH_PORTSTATUS_C_CONNECTION) - goto abort; - - /* check for reset completion */ - if (port->c_status & USBH_PORTSTATUS_C_RESET) { - port->c_status &= ~USBH_PORTSTATUS_C_RESET; - usbhhubClearFeaturePort(port, USBH_PORT_FEAT_C_RESET); - - if ((port->status & (USBH_PORTSTATUS_ENABLE | USBH_PORTSTATUS_CONNECTION)) - == (USBH_PORTSTATUS_ENABLE | USBH_PORTSTATUS_CONNECTION)) { - goto reset_success; - } - } - - /* check for timeout */ - if (osalOsGetSystemTimeX() - start > HAL_USBH_PORT_RESET_TIMEOUT) break; - } - } - - /* reset procedure failed; abort */ - goto abort; - -reset_success: - - uinfo("Reset OK, recovery..."); - - /* reset recovery */ - osalThreadSleepMilliseconds(100); - - /* initialize object */ - if (port->status & USBH_PORTSTATUS_LOW_SPEED) { - speed = USBH_DEVSPEED_LOW; - } else if (port->status & USBH_PORTSTATUS_HIGH_SPEED) { - speed = USBH_DEVSPEED_HIGH; - } else { - speed = USBH_DEVSPEED_FULL; - } - _device_initialize(&port->device, speed); - usbhEPOpen(&port->device.ctrl); - - /* device with default address (0), try enumeration */ - if (_device_enumerate(&port->device)) { - /* enumeration failed */ - usbhEPClose(&port->device.ctrl); - - if (!--retries) - goto abort; - - /* retry reset & enumeration */ - goto reset; - } - - /* load the default language ID */ - uinfo("Loading langID0..."); - if (!usbhStdReqGetStringDescriptor(&port->device, 0, 0, - USBH_DT_STRING_SIZE, (uint8_t *)&strdesc) - && (strdesc.bLength >= 4) - && !usbhStdReqGetStringDescriptor(&port->device, 0, 0, - 4, (uint8_t *)&strdesc)) { - - port->device.langID0 = strdesc.wData[0]; - uinfof("langID0=%04x", port->device.langID0); - } - - /* check if the device has only one configuration */ - if (port->device.devDesc.bNumConfigurations == 1) { - uinfo("Device has only one configuration"); - _device_configure(&port->device, 0); - } - - _classdriver_process_device(&port->device); - return; - -abort: - uerr("Abort"); - port->device.status = USBH_DEVSTATUS_DISCONNECTED; -} - -void _usbh_port_disconnected(usbh_port_t *port) { - if (port->device.status == USBH_DEVSTATUS_DISCONNECTED) - return; - - uinfo("Port disconnected"); - - /* unload drivers */ - while (port->device.drivers) { - usbh_baseclassdriver_t *drv = port->device.drivers; - - /* unload */ - uinfof("Unload driver %s", drv->info->name); - drv->info->vmt->unload(drv); - - /* unlink */ - drv->dev = 0; - port->device.drivers = drv->next; - } - - /* close control endpoint */ - osalSysLock(); - usbhEPCloseS(&port->device.ctrl); - osalSysUnlock(); - - /* free address */ - if (port->device.address) - _free_address(port->device.host, port->device.address); - - _device_free_full_cfgdesc(&port->device); - - port->device.status = USBH_DEVSTATUS_DISCONNECTED; -} - - - -/*===========================================================================*/ -/* Hub processing functions. */ -/*===========================================================================*/ - -#if HAL_USBH_USE_HUB -static void _hub_update_status(USBHDriver *host, USBHHubDriver *hub) { - uint32_t stat; - if (usbhhubControlRequest(host, - hub, - USBH_REQTYPE_IN | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE, - USBH_REQ_GET_STATUS, - 0, - 0, - 4, - (uint8_t *)&stat) != USBH_URBSTATUS_OK) { - return; - } - if (hub) { - hub->status = stat & 0xffff; - hub->c_status |= stat >> 16; - } -} - -static void _hub_process_status_change(USBHDriver *host, USBHHubDriver *hub) { - uinfo("Hub status change. GET_STATUS."); - _hub_update_status(host, hub); - - if (hub->c_status & USBH_HUBSTATUS_C_HUB_LOCAL_POWER) { - hub->c_status &= ~USBH_HUBSTATUS_C_HUB_LOCAL_POWER; - uinfo("Clear USBH_HUB_FEAT_C_HUB_LOCAL_POWER"); - usbhhubClearFeatureHub(host, hub, USBH_HUB_FEAT_C_HUB_LOCAL_POWER); - } - - if (hub->c_status & USBH_HUBSTATUS_C_HUB_OVER_CURRENT) { - hub->c_status &= ~USBH_HUBSTATUS_C_HUB_OVER_CURRENT; - uinfo("Clear USBH_HUB_FEAT_C_HUB_OVER_CURRENT"); - usbhhubClearFeatureHub(host, hub, USBH_HUB_FEAT_C_HUB_OVER_CURRENT); - } -} - -static uint32_t _hub_get_status_change_bitmap(USBHDriver *host, USBHHubDriver *hub) { - if (hub != NULL) { - osalSysLock(); - uint32_t ret = hub->statuschange; - hub->statuschange = 0; - osalOsRescheduleS(); - osalSysUnlock(); - return ret; - } - return usbh_lld_roothub_get_statuschange_bitmap(host); -} - -#else -//TODO: replace the functions above -#endif - -#if HAL_USBH_USE_HUB -static void _hub_process(USBHDriver *host, USBHHubDriver *hub) { - uint32_t bitmap = _hub_get_status_change_bitmap(host, hub); - if (!bitmap) - return; - - if (bitmap & 1) { - _hub_process_status_change(host, hub); - bitmap &= ~1; - } - - usbh_port_t *port = (hub == NULL) ? &host->rootport : hub->ports; - uint8_t i; - for (i = 1; i < 32; i++) { - if (!bitmap || !port) - break; - if (bitmap & (1 << i)) { - bitmap &= ~(1 << i); - _port_process_status_change(port); - } - port = port->next; - } - -} -#else -static void _hub_process(USBHDriver *host) { - uint32_t bitmap = usbh_lld_roothub_get_statuschange_bitmap(host); - -#if 0 //TODO: complete _hub_process_status_change for root hub - if (bitmap & 1) { - _hub_process_status_change(host, hub); - bitmap &= ~1; - } -#endif - - if (!bitmap) - return; - - _port_process_status_change(&host->rootport); -} -#endif - -/*===========================================================================*/ -/* Main processing loop (enumeration, loading/unloading drivers, etc). */ -/*===========================================================================*/ -void usbhMainLoop(USBHDriver *usbh) { - - if (usbh->status == USBH_STATUS_STOPPED) - return; - -#if HAL_USBH_USE_HUB - /* process root hub */ - _hub_process(usbh, NULL); - - /* process connected hubs */ - USBHHubDriver *hub; - list_for_each_entry(hub, USBHHubDriver, &usbh->hubs, node) { - _hub_process(usbh, hub); - } -#else - /* process root hub */ - _hub_process(usbh); -#endif -} - - -/*===========================================================================*/ -/* IAD class driver. */ -/*===========================================================================*/ -#if HAL_USBH_USE_IAD -static usbh_baseclassdriver_t *iad_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem); -static void iad_unload(usbh_baseclassdriver_t *drv); -static const usbh_classdriver_vmt_t usbhiadClassDriverVMT = { - iad_load, - iad_unload -}; -static const usbh_classdriverinfo_t usbhiadClassDriverInfo = { - 0xef, 0x02, 0x01, "IAD", &usbhiadClassDriverVMT -}; - -static usbh_baseclassdriver_t *iad_load(usbh_device_t *dev, - const uint8_t *descriptor, uint16_t rem) { - (void)rem; - - if (descriptor[1] != USBH_DT_DEVICE) - return 0; - - uinfo("Load a driver for each IF collection."); - - generic_iterator_t icfg; - if_iterator_t iif; - const usbh_ia_descriptor_t *last_iad = 0; - - cfg_iter_init(&icfg, dev->fullConfigurationDescriptor, - dev->basicConfigDesc.wTotalLength); - if (!icfg.valid) { - uerr("Invalid configuration descriptor."); - return 0; - } - - for (if_iter_init(&iif, &icfg); iif.valid; if_iter_next(&iif)) { - if (iif.iad && (iif.iad != last_iad)) { - last_iad = iif.iad; - if (_classdriver_load(dev, iif.iad->bFunctionClass, - iif.iad->bFunctionSubClass, - iif.iad->bFunctionProtocol, - (uint8_t *)iif.iad, - (uint8_t *)iif.curr - (uint8_t *)iif.iad + iif.rem) != HAL_SUCCESS) { - uwarnf("No drivers found for IF collection #%d:%d", - iif.iad->bFirstInterface, - iif.iad->bFirstInterface + iif.iad->bInterfaceCount - 1); - } - } - } - - return 0; -} - -static void iad_unload(usbh_baseclassdriver_t *drv) { - (void)drv; -} -#endif - - -/*===========================================================================*/ -/* Class driver loader. */ -/*===========================================================================*/ - -static const usbh_classdriverinfo_t *usbh_classdrivers_lookup[] = { -#if HAL_USBH_USE_FTDI - &usbhftdiClassDriverInfo, -#endif -#if HAL_USBH_USE_IAD - &usbhiadClassDriverInfo, -#endif -#if HAL_USBH_USE_UVC - &usbhuvcClassDriverInfo, -#endif -#if HAL_USBH_USE_MSD - &usbhmsdClassDriverInfo, -#endif -#if HAL_USBH_USE_HUB - &usbhhubClassDriverInfo -#endif -}; - -static bool _classdriver_load(usbh_device_t *dev, uint8_t class, - uint8_t subclass, uint8_t protocol, uint8_t *descbuff, uint16_t rem) { - uint8_t i; - usbh_baseclassdriver_t *drv = NULL; - for (i = 0; i < sizeof_array(usbh_classdrivers_lookup); i++) { - const usbh_classdriverinfo_t *const info = usbh_classdrivers_lookup[i]; - if (class == 0xff) { - /* vendor specific */ - if (info->class == 0xff) { - uinfof("Try load vendor-specific driver %s", info->name); - drv = info->vmt->load(dev, descbuff, rem); - if (drv != NULL) - goto success; - } - } else if ((info->class < 0) || ((info->class == class) - && ((info->subclass < 0) || ((info->subclass == subclass) - && ((info->protocol < 0) || (info->protocol == protocol)))))) { - uinfof("Try load driver %s", info->name); - drv = info->vmt->load(dev, descbuff, rem); - -#if HAL_USBH_USE_IAD - /* special case: */ - if (info == &usbhiadClassDriverInfo) - return HAL_SUCCESS; -#endif - - if (drv != NULL) - goto success; - } - } - return HAL_FAILED; - -success: - /* Link this driver to the device */ - drv->next = dev->drivers; - dev->drivers = drv; - drv->dev = dev; - return HAL_SUCCESS; -} - -static void _classdriver_process_device(usbh_device_t *dev) { - uinfo("New device found."); - const usbh_device_descriptor_t *const devdesc = &dev->devDesc; - - usbhDevicePrintInfo(dev); - - /* TODO: Support multiple configurations - * - * Windows doesn't support them, so it's unlikely that any commercial USB device - * will have multiple configurations. - */ - if (dev->status != USBH_DEVSTATUS_CONFIGURED) { - uwarn("Multiple configurations not supported, selecting configuration #0"); - if (_device_configure(dev, 0) != HAL_SUCCESS) { - uerr("Couldn't configure device; abort."); - return; - } - } - - _device_read_full_cfgdesc(dev, dev->bConfiguration); - if (dev->fullConfigurationDescriptor == NULL) { - uerr("Couldn't read full configuration descriptor; abort."); - return; - } - - usbhDevicePrintConfiguration(dev->fullConfigurationDescriptor, - dev->basicConfigDesc.wTotalLength); - - if (devdesc->bDeviceClass == 0) { - /* each interface defines its own device class/subclass/protocol */ - uinfo("Load a driver for each IF."); - - generic_iterator_t icfg; - if_iterator_t iif; - uint8_t last_if = 0xff; - - cfg_iter_init(&icfg, dev->fullConfigurationDescriptor, - dev->basicConfigDesc.wTotalLength); - if (!icfg.valid) { - uerr("Invalid configuration descriptor."); - goto exit; - } - - for (if_iter_init(&iif, &icfg); iif.valid; if_iter_next(&iif)) { - const usbh_interface_descriptor_t *const ifdesc = if_get(&iif); - if (ifdesc->bInterfaceNumber != last_if) { - last_if = ifdesc->bInterfaceNumber; - if (_classdriver_load(dev, ifdesc->bInterfaceClass, - ifdesc->bInterfaceSubClass, - ifdesc->bInterfaceProtocol, - (uint8_t *)ifdesc, iif.rem) != HAL_SUCCESS) { - uwarnf("No drivers found for IF #%d", ifdesc->bInterfaceNumber); - } - } - } - - } else { - if (_classdriver_load(dev, devdesc->bDeviceClass, - devdesc->bDeviceSubClass, - devdesc->bDeviceProtocol, - (uint8_t *)devdesc, USBH_DT_DEVICE_SIZE) != HAL_SUCCESS) { - uwarn("No drivers found."); - } - } - -exit: - if (dev->keepFullCfgDesc == 0) { - _device_free_full_cfgdesc(dev); - } -} - - -#endif - diff --git a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_debug.c b/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_debug.c deleted file mode 100644 index 9f17189..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_debug.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_USBH - -#include "ch.h" -#include "usbh/debug.h" -#include -#include "chprintf.h" - -#if USBH_DEBUG_ENABLE - -#define MAX_FILLER 11 -#define FLOAT_PRECISION 9 -#define MPRINTF_USE_FLOAT 0 - -static char *long_to_string_with_divisor(char *p, long num, unsigned radix, long divisor) -{ - int i; - char *q; - long l, ll; - - l = num; - if (divisor == 0) { - ll = num; - } else { - ll = divisor; - } - - q = p + MAX_FILLER; - do { - i = (int)(l % radix); - i += '0'; - if (i > '9') { - i += 'A' - '0' - 10; - } - *--q = i; - l /= radix; - } while ((ll /= radix) != 0); - - i = (int)(p + MAX_FILLER - q); - do { - *p++ = *q++; - } while (--i); - - return p; -} - -static char *ltoa(char *p, long num, unsigned radix) { - - return long_to_string_with_divisor(p, num, radix, 0); -} - -#if MPRINTF_USE_FLOAT -static const long _pow10[FLOAT_PRECISION] = {10, 100, 1000, 10000, 100000, 1000000, - 10000000, 100000000, 1000000000}; -static const double m10[FLOAT_PRECISION] = {5.0/100, 5.0/1000, 5.0/10000, 5.0/100000, 5.0/1000000, - 5.0/10000000, 5.0/100000000, 5.0/1000000000, 5.0/10000000000}; - -static char *ftoa(char *p, double num, unsigned long precision, bool dot) { - long l; - char *q; - double r; - - - if (precision == 0) { - l = (long)(num + 0.5); - return long_to_string_with_divisor(p, l, 10, 0); - } else { - if (precision > FLOAT_PRECISION) precision = FLOAT_PRECISION; - r = m10[precision - 1]; - precision = _pow10[precision - 1]; - - l = (long)num; - p = long_to_string_with_divisor(p, l, 10, 0); - if (dot) *p++ = '.'; - l = (long)((num - l + r) * precision); - q = long_to_string_with_divisor(p, l, 10, precision / 10) - 1; - - while (q > p) { - if (*q != '0') { - break; - } - --q; - } - return ++q; - } - - - - -} -#endif - -static inline void _put(char c) { - input_queue_t *iqp = &USBH_DEBUG_USBHD.iq; - - if (chIQIsFullI(iqp)) - return; - - iqp->q_counter++; - *iqp->q_wrptr++ = c; - if (iqp->q_wrptr >= iqp->q_top) - iqp->q_wrptr = iqp->q_buffer; - -} - -int _dbg_printf(const char *fmt, va_list ap) { - char *p, *s, c, filler; - int i, precision, width; - int n = 0; - bool is_long, left_align, sign; - long l; -#if MPRINTF_USE_FLOAT - double f; - char tmpbuf[2*MAX_FILLER + 1]; -#else - char tmpbuf[MAX_FILLER + 1]; -#endif - - for (;;) { - - //agarrar nuevo caracter de formato - c = *fmt++; - - //chequeo eos - if (c == 0) return n; - - //copio los caracteres comunes - if (c != '%') { - _put(c); - n++; - continue; - } - - //encontré un '%' - p = tmpbuf; - s = tmpbuf; - - //left align - left_align = FALSE; - if (*fmt == '-') { - fmt++; - left_align = TRUE; - } - - sign = FALSE; - if (*fmt == '+') { - fmt++; - sign = TRUE; - } - - //filler - filler = ' '; - if (*fmt == '0') { - fmt++; - filler = '0'; - } - - //width - width = 0; - while (TRUE) { - c = *fmt++; - if (c >= '0' && c <= '9') - c -= '0'; - else if (c == '*') - c = va_arg(ap, int); - else - break; - width = width * 10 + c; - } - - //precision - precision = 0; - if (c == '.') { - - if (*fmt == 'n') { - fmt++; - - } - while (TRUE) { - c = *fmt++; - if (c >= '0' && c <= '9') - c -= '0'; - else if (c == '*') - c = va_arg(ap, int); - else - break; - precision = precision * 10 + c; - } - } - - //long modifier - if (c == 'l' || c == 'L') { - is_long = TRUE; - if (*fmt) - c = *fmt++; - } - else - is_long = (c >= 'A') && (c <= 'Z'); - - /* Command decoding.*/ - switch (c) { - //char - case 'c': - filler = ' '; - *p++ = va_arg(ap, int); - break; - - //string - case 's': - filler = ' '; - if ((s = va_arg(ap, char *)) == 0) - s = (char *)"(null)"; - if (precision == 0) - precision = 32767; - - //strlen con límite hasta precision - for (p = s; *p && (--precision >= 0); p++) - ; - break; - - - - case 'D': - case 'd': - case 'I': - case 'i': - if (is_long) - l = va_arg(ap, long); - else - l = va_arg(ap, int); - if (l < 0) { - *p++ = '-'; - l = -l; - sign = TRUE; - } else if (sign) { - *p++ = '+'; - } - p = ltoa(p, l, 10); - break; - -#if MPRINTF_USE_FLOAT - case 'f': - f = va_arg(ap, double); - if (f < 0) { - *p++ = '-'; - f = -f; - sign = TRUE; - } else if (sign) { - *p++ = '+'; - } - if (prec == FALSE) precision = 6; - p = ftoa(p, f, precision, dot); - break; -#endif - - - case 'X': - case 'x': - c = 16; - goto unsigned_common; - case 'U': - case 'u': - c = 10; - goto unsigned_common; - case 'O': - case 'o': - c = 8; - -unsigned_common: - if (is_long) - l = va_arg(ap, unsigned long); - else - l = va_arg(ap, unsigned int); - p = ltoa(p, l, c); - break; - - //copiar - default: - *p++ = c; - break; - } - - //longitud - i = (int)(p - s); - - //calculo cuántos caracteres de filler debo poner - if ((width -= i) < 0) - width = 0; - - if (left_align == FALSE) - width = -width; - - if (width < 0) { - //alineado a la derecha - - //poner el signo adelante - if (sign && filler == '0') { - _put(*s++); - n++; - i--; - } - - //fill a la izquierda - do { - _put(filler); - n++; - } while (++width != 0); - } - - //copiar los caracteres - while (--i >= 0) { - _put(*s++); - n++; - } - - //fill a la derecha - while (width) { - _put(filler); - n++; - width--; - } - } - - //return n; // can raise 'code is unreachable' warning - -} - -static void _print_hdr(void) -{ - uint32_t hfnum = USBH_DEBUG_USBHD.otg->HFNUM; - uint16_t hfir = USBH_DEBUG_USBHD.otg->HFIR; - - _put(0xff); - _put(0xff); - _put(hfir & 0xff); - _put(hfir >> 8); - _put(hfnum & 0xff); - _put((hfnum >> 8) & 0xff); - _put((hfnum >> 16) & 0xff); - _put((hfnum >> 24) & 0xff); -} - -void usbDbgPrintf(const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - syssts_t sts = chSysGetStatusAndLockX(); - _print_hdr(); - _dbg_printf(fmt, ap); - _put(0); - chThdDequeueNextI(&USBH_DEBUG_USBHD.iq.q_waiting, Q_OK); - chSysRestoreStatusX(sts); - va_end(ap); -} - - -void usbDbgPuts(const char *s) -{ - uint32_t buff[2] = { - 0xffff | (USBH_DEBUG_USBHD.otg->HFIR << 16), - USBH_DEBUG_USBHD.otg->HFNUM - }; - uint8_t *p = (uint8_t *)buff; - uint8_t *top = p + 8; - - syssts_t sts = chSysGetStatusAndLockX(); - input_queue_t *iqp = &USBH_DEBUG_USBHD.iq; - int rem = sizeof(USBH_DEBUG_USBHD.dbg_buff) - iqp->q_counter; - while (rem) { - *iqp->q_wrptr++ = *p; - if (iqp->q_wrptr >= iqp->q_top) - iqp->q_wrptr = iqp->q_buffer; - rem--; - if (++p == top) break; - } - while (rem) { - *iqp->q_wrptr++ = *s; - if (iqp->q_wrptr >= iqp->q_top) - iqp->q_wrptr = iqp->q_buffer; - rem--; - if (!*s++) break; - } - iqp->q_counter = sizeof(USBH_DEBUG_USBHD.dbg_buff) - rem; - chThdDequeueNextI(&USBH_DEBUG_USBHD.iq.q_waiting, Q_OK); - chSysRestoreStatusX(sts); -} - -void usbDbgReset(void) { - const char *msg = "\r\n\r\n==== DEBUG OUTPUT RESET ====\r\n"; - - syssts_t sts = chSysGetStatusAndLockX(); - chIQResetI(&USBH_DEBUG_USBHD.iq); - chOQResetI(&USBH_DEBUG_SD.oqueue); - while (*msg) { - *USBH_DEBUG_SD.oqueue.q_wrptr++ = *msg++; - USBH_DEBUG_SD.oqueue.q_counter--; - } - chSysRestoreStatusX(sts); -} - -static int _get(void) { - if (!USBH_DEBUG_USBHD.iq.q_counter) return -1; - USBH_DEBUG_USBHD.iq.q_counter--; - uint8_t b = *USBH_DEBUG_USBHD.iq.q_rdptr++; - if (USBH_DEBUG_USBHD.iq.q_rdptr >= USBH_DEBUG_USBHD.iq.q_top) { - USBH_DEBUG_USBHD.iq.q_rdptr = USBH_DEBUG_USBHD.iq.q_buffer; - } - return b; -} - -void usbDbgSystemHalted(void) { - while (true) { - if (!((bool)((USBH_DEBUG_SD.oqueue.q_wrptr == USBH_DEBUG_SD.oqueue.q_rdptr) && (USBH_DEBUG_SD.oqueue.q_counter != 0U)))) - break; - USBH_DEBUG_SD.oqueue.q_counter++; - while (!(USART1->SR & USART_SR_TXE)); - USART1->DR = *USBH_DEBUG_SD.oqueue.q_rdptr++; - if (USBH_DEBUG_SD.oqueue.q_rdptr >= USBH_DEBUG_SD.oqueue.q_top) { - USBH_DEBUG_SD.oqueue.q_rdptr = USBH_DEBUG_SD.oqueue.q_buffer; - } - } - - int c; - int state = 0; - for (;;) { - c = _get(); if (c < 0) break; - - if (state == 0) { - if (c == 0xff) state = 1; - } else if (state == 1) { - if (c == 0xff) state = 2; - else (state = 0); - } else { - c = _get(); if (c < 0) return; - c = _get(); if (c < 0) return; - c = _get(); if (c < 0) return; - c = _get(); if (c < 0) return; - c = _get(); if (c < 0) return; - - while (true) { - c = _get(); if (c < 0) return; - if (!c) { - while (!(USART1->SR & USART_SR_TXE)); - USART1->DR = '\r'; - while (!(USART1->SR & USART_SR_TXE)); - USART1->DR = '\n'; - state = 0; - break; - } - while (!(USART1->SR & USART_SR_TXE)); - USART1->DR = c; - } - } - } -} - -static void usb_debug_thread(void *p) { - USBHDriver *host = (USBHDriver *)p; - uint8_t state = 0; - - chRegSetThreadName("USBH_DBG"); - while (true) { - msg_t c = chIQGet(&host->iq); - if (c < 0) goto reset; - - if (state == 0) { - if (c == 0xff) state = 1; - } else if (state == 1) { - if (c == 0xff) state = 2; - else (state = 0); - } else { - uint16_t hfir; - uint32_t hfnum; - - hfir = c; - c = chIQGet(&host->iq); if (c < 0) goto reset; - hfir |= c << 8; - - c = chIQGet(&host->iq); if (c < 0) goto reset; - hfnum = c; - c = chIQGet(&host->iq); if (c < 0) goto reset; - hfnum |= c << 8; - c = chIQGet(&host->iq); if (c < 0) goto reset; - hfnum |= c << 16; - c = chIQGet(&host->iq); if (c < 0) goto reset; - hfnum |= c << 24; - - uint32_t f = hfnum & 0xffff; - uint32_t p = 1000 - ((hfnum >> 16) / (hfir / 1000)); - chprintf((BaseSequentialStream *)&USBH_DEBUG_SD, "%05d.%03d ", f, p); - - while (true) { - c = chIQGet(&host->iq); if (c < 0) goto reset; - if (!c) { - sdPut(&USBH_DEBUG_SD, '\r'); - sdPut(&USBH_DEBUG_SD, '\n'); - state = 0; - break; - } - sdPut(&USBH_DEBUG_SD, (uint8_t)c); - } - } - - continue; -reset: - state = 0; - } -} - -void usbDbgInit(USBHDriver *host) { - if (host != &USBH_DEBUG_USBHD) - return; - chIQObjectInit(&USBH_DEBUG_USBHD.iq, USBH_DEBUG_USBHD.dbg_buff, sizeof(USBH_DEBUG_USBHD.dbg_buff), 0, 0); - chThdCreateStatic(USBH_DEBUG_USBHD.waDebug, sizeof(USBH_DEBUG_USBHD.waDebug), NORMALPRIO, usb_debug_thread, &USBH_DEBUG_USBHD); -} -#endif - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_desciter.c b/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_desciter.c deleted file mode 100644 index 63137d4..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_desciter.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -#if HAL_USE_USBH - -#include "usbh/defs.h" -#include "usbh/desciter.h" - -void cfg_iter_init(generic_iterator_t *icfg, const uint8_t *buff, uint16_t rem) { - icfg->valid = 0; - - if ((buff[0] < 2) || (rem < 2) || (rem < buff[0]) - || (buff[0] < USBH_DT_CONFIG_SIZE) - || (buff[1] != USBH_DT_CONFIG)) - return; - - if (rem > ((usbh_config_descriptor_t *)buff)->wTotalLength) { - rem = ((usbh_config_descriptor_t *)buff)->wTotalLength; - } - - icfg->valid = 1; - icfg->rem = rem; - icfg->curr = buff; -} - -void if_iter_next(if_iterator_t *iif) { - const uint8_t *curr = iif->curr; - uint16_t rem = iif->rem; - - iif->valid = 0; - - if ((curr[0] < 2) || (rem < 2) || (rem < curr[0])) - return; - - for (;;) { - rem -= curr[0]; - curr += curr[0]; - - if ((curr[0] < 2) || (rem < 2) || (rem < curr[0])) - return; - - if (curr[1] == USBH_DT_INTERFACE_ASSOCIATION) { - if (curr[0] < USBH_DT_INTERFACE_ASSOCIATION_SIZE) - return; - - iif->iad = (usbh_ia_descriptor_t *)curr; - - } else if (curr[1] == USBH_DT_INTERFACE) { - if (curr[0] < USBH_DT_INTERFACE_SIZE) - return; - - if (iif->iad) { - if ((curr[2] < iif->iad->bFirstInterface) - || (curr[2] >= (iif->iad->bFirstInterface + iif->iad->bInterfaceCount))) - iif->iad = 0; - } - break; - } - } - - iif->valid = 1; - iif->rem = rem; - iif->curr = curr; -} - -void if_iter_init(if_iterator_t *iif, const generic_iterator_t *icfg) { - iif->iad = 0; - iif->curr = icfg->curr; - iif->rem = icfg->rem; - if_iter_next(iif); -} - -void ep_iter_next(generic_iterator_t *iep) { - const uint8_t *curr = iep->curr; - uint16_t rem = iep->rem; - - iep->valid = 0; - - if ((curr[0] < 2) || (rem < 2) || (rem < curr[0])) - return; - - for (;;) { - rem -= curr[0]; - curr += curr[0]; - - if ((curr[0] < 2) || (rem < 2) || (rem < curr[0])) - return; - - if ((curr[1] == USBH_DT_INTERFACE_ASSOCIATION) - || (curr[1] == USBH_DT_INTERFACE) - || (curr[1] == USBH_DT_CONFIG)) { - return; - } else if (curr[1] == USBH_DT_ENDPOINT) { - if (curr[0] < USBH_DT_ENDPOINT_SIZE) - return; - - break; - } - } - - iep->valid = 1; - iep->rem = rem; - iep->curr = curr; -} - -void ep_iter_init(generic_iterator_t *iep, const if_iterator_t *iif) { - iep->curr = iif->curr; - iep->rem = iif->rem; - ep_iter_next(iep); -} - -void cs_iter_next(generic_iterator_t *ics) { - const uint8_t *curr = ics->curr; - uint16_t rem = ics->rem; - - ics->valid = 0; - - if ((curr[0] < 2) || (rem < 2) || (rem < curr[0])) - return; - - //for (;;) { - rem -= curr[0]; - curr += curr[0]; - - if ((curr[0] < 2) || (rem < 2) || (rem < curr[0])) - return; - - if ((curr[1] == USBH_DT_INTERFACE_ASSOCIATION) - || (curr[1] == USBH_DT_INTERFACE) - || (curr[1] == USBH_DT_CONFIG) - || (curr[1] == USBH_DT_ENDPOINT)) { - return; - } - - // break; - //} - - ics->valid = 1; - ics->rem = rem; - ics->curr = curr; -} - -void cs_iter_init(generic_iterator_t *ics, const generic_iterator_t *iter) { - ics->curr = iter->curr; - ics->rem = iter->rem; - cs_iter_next(ics); -} - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_ftdi.c b/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_ftdi.c deleted file mode 100644 index 4bd7296..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_ftdi.c +++ /dev/null @@ -1,717 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" -#include "hal_usbh.h" - -#if HAL_USBH_USE_FTDI - -#if !HAL_USE_USBH -#error "USBHFTDI needs USBH" -#endif - -#include -#include "usbh/dev/ftdi.h" -#include "usbh/internal.h" - -//#pragma GCC optimize("Og") - - -#if USBHFTDI_DEBUG_ENABLE_TRACE -#define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define udbgf(f, ...) do {} while(0) -#define udbg(f, ...) do {} while(0) -#endif - -#if USBHFTDI_DEBUG_ENABLE_INFO -#define uinfof(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uinfo(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uinfof(f, ...) do {} while(0) -#define uinfo(f, ...) do {} while(0) -#endif - -#if USBHFTDI_DEBUG_ENABLE_WARNINGS -#define uwarnf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uwarn(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uwarnf(f, ...) do {} while(0) -#define uwarn(f, ...) do {} while(0) -#endif - -#if USBHFTDI_DEBUG_ENABLE_ERRORS -#define uerrf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uerr(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uerrf(f, ...) do {} while(0) -#define uerr(f, ...) do {} while(0) -#endif - - -/*===========================================================================*/ -/* USB Class driver loader for FTDI */ -/*===========================================================================*/ -USBHFTDIDriver USBHFTDID[HAL_USBHFTDI_MAX_INSTANCES]; - -static usbh_baseclassdriver_t *_ftdi_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem); -static void _ftdi_unload(usbh_baseclassdriver_t *drv); - -static const usbh_classdriver_vmt_t class_driver_vmt = { - _ftdi_load, - _ftdi_unload -}; - -const usbh_classdriverinfo_t usbhftdiClassDriverInfo = { - 0xff, 0xff, 0xff, "FTDI", &class_driver_vmt -}; - -static USBHFTDIPortDriver *_find_port(void) { - uint8_t i; - for (i = 0; i < HAL_USBHFTDI_MAX_PORTS; i++) { - if (FTDIPD[i].ftdip == NULL) - return &FTDIPD[i]; - } - return NULL; -} - -static usbh_baseclassdriver_t *_ftdi_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem) { - int i; - USBHFTDIDriver *ftdip; - - if (dev->devDesc.idVendor != 0x0403) { - uerr("FTDI: Unrecognized VID"); - return NULL; - } - - switch (dev->devDesc.idProduct) { - case 0x6001: - case 0x6010: - case 0x6011: - case 0x6014: - case 0x6015: - break; - default: - uerr("FTDI: Unrecognized PID"); - return NULL; - } - - if ((rem < descriptor[0]) || (descriptor[1] != USBH_DT_INTERFACE)) - return NULL; - - const usbh_interface_descriptor_t * const ifdesc = (const usbh_interface_descriptor_t * const)descriptor; - if (ifdesc->bInterfaceNumber != 0) { - uwarn("FTDI: Will allocate driver along with IF #0"); - } - - /* alloc driver */ - for (i = 0; i < HAL_USBHFTDI_MAX_INSTANCES; i++) { - if (USBHFTDID[i].dev == NULL) { - ftdip = &USBHFTDID[i]; - goto alloc_ok; - } - } - - uwarn("FTDI: Can't alloc driver"); - - /* can't alloc */ - return NULL; - -alloc_ok: - /* initialize the driver's variables */ - ftdip->ports = 0; - switch (dev->devDesc.bcdDevice) { - case 0x200: //AM - uinfo("FTDI: Type A chip"); - ftdip->type = USBHFTDI_TYPE_A; - break; - case 0x400: //BM - case 0x500: //2232C - case 0x600: //R - case 0x1000: //230X - uinfo("FTDI: Type B chip"); - ftdip->type = USBHFTDI_TYPE_B; - break; - case 0x700: //2232H; - case 0x800: //4232H; - case 0x900: //232H; - uinfo("FTDI: Type H chip"); - ftdip->type = USBHFTDI_TYPE_H; - default: - uerr("FTDI: Unrecognized chip type"); - return NULL; - } - usbhEPSetName(&dev->ctrl, "FTD[CTRL]"); - - /* parse the configuration descriptor */ - generic_iterator_t iep, icfg; - if_iterator_t iif; - cfg_iter_init(&icfg, dev->fullConfigurationDescriptor, dev->basicConfigDesc.wTotalLength); - for (if_iter_init(&iif, &icfg); iif.valid; if_iter_next(&iif)) { - const usbh_interface_descriptor_t *const ifdesc = if_get(&iif); - uinfof("FTDI: Interface #%d", ifdesc->bInterfaceNumber); - - USBHFTDIPortDriver *const prt = _find_port(); - if (prt == NULL) { - uwarn("\tCan't alloc port for this interface"); - break; - } - - prt->ifnum = ifdesc->bInterfaceNumber; - prt->epin.status = USBH_EPSTATUS_UNINITIALIZED; - prt->epout.status = USBH_EPSTATUS_UNINITIALIZED; - - for (ep_iter_init(&iep, &iif); iep.valid; ep_iter_next(&iep)) { - const usbh_endpoint_descriptor_t *const epdesc = ep_get(&iep); - if ((epdesc->bEndpointAddress & 0x80) && (epdesc->bmAttributes == USBH_EPTYPE_BULK)) { - uinfof("BULK IN endpoint found: bEndpointAddress=%02x", epdesc->bEndpointAddress); - usbhEPObjectInit(&prt->epin, dev, epdesc); - usbhEPSetName(&prt->epin, "FTD[BIN ]"); - } else if (((epdesc->bEndpointAddress & 0x80) == 0) - && (epdesc->bmAttributes == USBH_EPTYPE_BULK)) { - uinfof("BULK OUT endpoint found: bEndpointAddress=%02x", epdesc->bEndpointAddress); - usbhEPObjectInit(&prt->epout, dev, epdesc); - usbhEPSetName(&prt->epout, "FTD[BOUT]"); - } else { - uinfof("unsupported endpoint found: bEndpointAddress=%02x, bmAttributes=%02x", - epdesc->bEndpointAddress, epdesc->bmAttributes); - } - } - - if ((prt->epin.status != USBH_EPSTATUS_CLOSED) - || (prt->epout.status != USBH_EPSTATUS_CLOSED)) { - uwarn("\tCouldn't find endpoints; can't alloc port for this interface"); - continue; - } - - /* link the new block driver to the list */ - prt->next = ftdip->ports; - ftdip->ports = prt; - prt->ftdip = ftdip; - - prt->state = USBHFTDIP_STATE_ACTIVE; - } - - return (usbh_baseclassdriver_t *)ftdip; - -} - -static void _stop(USBHFTDIPortDriver *ftdipp); -static void _ftdi_unload(usbh_baseclassdriver_t *drv) { - osalDbgCheck(drv != NULL); - USBHFTDIDriver *const ftdip = (USBHFTDIDriver *)drv; - USBHFTDIPortDriver *ftdipp = ftdip->ports; - - osalMutexLock(&ftdip->mtx); - while (ftdipp) { - _stop(ftdipp); - ftdipp = ftdipp->next; - } - - ftdipp = ftdip->ports; - osalSysLock(); - while (ftdipp) { - USBHFTDIPortDriver *next = ftdipp->next; - usbhftdipObjectInit(ftdipp); - ftdipp = next; - } - osalSysUnlock(); - osalMutexUnlock(&ftdip->mtx); -} - - -USBHFTDIPortDriver FTDIPD[HAL_USBHFTDI_MAX_PORTS]; - - -#define FTDI_COMMAND_RESET 0 -#define FTDI_RESET_ALL 0 -#define FTDI_RESET_PURGE_RX 1 -#define FTDI_RESET_PURGE_TX 2 - -#define FTDI_COMMAND_SETFLOW 2 - -#define FTDI_COMMAND_SETBAUD 3 - -#define FTDI_COMMAND_SETDATA 4 -#define FTDI_SETDATA_BREAK (0x1 << 14) - -#if 0 -#define FTDI_COMMAND_MODEMCTRL 1 -#define FTDI_COMMAND_GETMODEMSTATUS 5 /* Retrieve current value of modem status register */ -#define FTDI_COMMAND_SETEVENTCHAR 6 /* Set the event character */ -#define FTDI_COMMAND_SETERRORCHAR 7 /* Set the error character */ -#define FTDI_COMMAND_SETLATENCYTIMER 9 /* Set the latency timer */ -#define FTDI_COMMAND_GETLATENCYTIMER 10 /* Get the latency timer */ -#endif - -/* - * DATA FORMAT - * - * IN Endpoint - * - * The device reserves the first two bytes of data on this endpoint to contain - * the current values of the modem and line status registers. In the absence of - * data, the device generates a message consisting of these two status bytes - * every 40 ms - * - * Byte 0: Modem Status - * - * Offset Description - * B0 Reserved - must be 1 - * B1 Reserved - must be 0 - * B2 Reserved - must be 0 - * B3 Reserved - must be 0 - * B4 Clear to Send (CTS) - * B5 Data Set Ready (DSR) - * B6 Ring Indicator (RI) - * B7 Receive Line Signal Detect (RLSD) - * - * Byte 1: Line Status - * - * Offset Description - * B0 Data Ready (DR) - * B1 Overrun Error (OE) - * B2 Parity Error (PE) - * B3 Framing Error (FE) - * B4 Break Interrupt (BI) - * B5 Transmitter Holding Register (THRE) - * B6 Transmitter Empty (TEMT) - * B7 Error in RCVR FIFO - * - */ -#define FTDI_RS0_CTS (1 << 4) -#define FTDI_RS0_DSR (1 << 5) -#define FTDI_RS0_RI (1 << 6) -#define FTDI_RS0_RLSD (1 << 7) - -#define FTDI_RS_DR 1 -#define FTDI_RS_OE (1<<1) -#define FTDI_RS_PE (1<<2) -#define FTDI_RS_FE (1<<3) -#define FTDI_RS_BI (1<<4) -#define FTDI_RS_THRE (1<<5) -#define FTDI_RS_TEMT (1<<6) -#define FTDI_RS_FIFO (1<<7) - - -static usbh_urbstatus_t _ftdi_port_control(USBHFTDIPortDriver *ftdipp, - uint8_t bRequest, uint8_t wValue, uint8_t bHIndex, uint16_t wLength, - uint8_t *buff) { - - static const uint8_t bmRequestType[] = { - USBH_REQTYPE_VENDOR | USBH_REQTYPE_OUT | USBH_REQTYPE_DEVICE, //0 FTDI_COMMAND_RESET - USBH_REQTYPE_VENDOR | USBH_REQTYPE_OUT | USBH_REQTYPE_DEVICE, //1 FTDI_COMMAND_MODEMCTRL - USBH_REQTYPE_VENDOR | USBH_REQTYPE_OUT | USBH_REQTYPE_DEVICE, //2 FTDI_COMMAND_SETFLOW - USBH_REQTYPE_VENDOR | USBH_REQTYPE_OUT | USBH_REQTYPE_DEVICE, //3 FTDI_COMMAND_SETBAUD - USBH_REQTYPE_VENDOR | USBH_REQTYPE_OUT | USBH_REQTYPE_DEVICE, //4 FTDI_COMMAND_SETDATA - }; - - osalDbgCheck(bRequest < sizeof_array(bmRequestType)); - osalDbgCheck(bRequest != 1); - - const USBH_DEFINE_BUFFER(usbh_control_request_t, req) = { - bmRequestType[bRequest], - bRequest, - wValue, - (bHIndex << 8) | (ftdipp->ifnum + 1), - wLength - }; - - return usbhControlRequestExtended(ftdipp->ftdip->dev, &req, buff, NULL, MS2ST(1000)); -} - -static uint32_t _get_divisor(uint32_t baud, usbhftdi_type_t type) { - static const uint8_t divfrac[8] = {0, 3, 2, 4, 1, 5, 6, 7}; - uint32_t divisor; - - if (type == USBHFTDI_TYPE_A) { - uint32_t divisor3 = ((48000000UL / 2) + baud / 2) / baud; - uinfof("FTDI: desired=%dbps, real=%dbps", baud, (48000000UL / 2) / divisor3); - if ((divisor3 & 0x7) == 7) - divisor3++; /* round x.7/8 up to x+1 */ - - divisor = divisor3 >> 3; - divisor3 &= 0x7; - if (divisor3 == 1) - divisor |= 0xc000; - else if (divisor3 >= 4) - divisor |= 0x4000; - else if (divisor3 != 0) - divisor |= 0x8000; - else if (divisor == 1) - divisor = 0; /* special case for maximum baud rate */ - } else { - if (type == USBHFTDI_TYPE_B) { - divisor = ((48000000UL / 2) + baud / 2) / baud; - uinfof("FTDI: desired=%dbps, real=%dbps", baud, (48000000UL / 2) / divisor); - } else { - /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ - if (baud < 1200) - baud = 1200; - divisor = (120000000UL * 8 + baud * 5) / (baud * 10); - uinfof("FTDI: desired=%dbps, real=%dbps", baud, (120000000UL * 8) / divisor / 10); - } - divisor = (divisor >> 3) | (divfrac[divisor & 0x7] << 14); - - /* Deal with special cases for highest baud rates. */ - if (divisor == 1) - divisor = 0; - else if (divisor == 0x4001) - divisor = 1; - - if (type == USBHFTDI_TYPE_H) - divisor |= 0x00020000; - } - return divisor; -} - -static usbh_urbstatus_t _set_baudrate(USBHFTDIPortDriver *ftdipp, uint32_t baudrate) { - uint32_t divisor = _get_divisor(baudrate, ftdipp->ftdip->type); - uint16_t wValue = (uint16_t)divisor; - uint16_t wIndex = (uint16_t)(divisor >> 16); - if (ftdipp->ftdip->dev->basicConfigDesc.bNumInterfaces > 1) - wIndex = (wIndex << 8) | (ftdipp->ifnum + 1); - - const USBH_DEFINE_BUFFER(usbh_control_request_t, req) = { - USBH_REQTYPE_VENDOR | USBH_REQTYPE_OUT | USBH_REQTYPE_DEVICE, - FTDI_COMMAND_SETBAUD, - wValue, - wIndex, - 0 - }; - return usbhControlRequestExtended(ftdipp->ftdip->dev, &req, NULL, NULL, MS2ST(1000)); -} - - -static void _submitOutI(USBHFTDIPortDriver *ftdipp, uint32_t len) { - udbgf("FTDI: Submit OUT %d", len); - ftdipp->oq_urb.requestedLength = len; - usbhURBObjectResetI(&ftdipp->oq_urb); - usbhURBSubmitI(&ftdipp->oq_urb); -} - -static void _out_cb(usbh_urb_t *urb) { - USBHFTDIPortDriver *const ftdipp = (USBHFTDIPortDriver *)urb->userData; - switch (urb->status) { - case USBH_URBSTATUS_OK: - ftdipp->oq_ptr = ftdipp->oq_buff; - ftdipp->oq_counter = 64; - chThdDequeueNextI(&ftdipp->oq_waiting, Q_OK); - return; - case USBH_URBSTATUS_DISCONNECTED: - uwarn("FTDI: URB OUT disconnected"); - chThdDequeueNextI(&ftdipp->oq_waiting, Q_RESET); - return; - default: - uerrf("FTDI: URB OUT status unexpected = %d", urb->status); - break; - } - usbhURBObjectResetI(&ftdipp->oq_urb); - usbhURBSubmitI(&ftdipp->oq_urb); -} - -static size_t _write_timeout(USBHFTDIPortDriver *ftdipp, const uint8_t *bp, - size_t n, systime_t timeout) { - chDbgCheck(n > 0U); - - size_t w = 0; - chSysLock(); - while (true) { - if (ftdipp->state != USBHFTDIP_STATE_READY) { - chSysUnlock(); - return w; - } - while (usbhURBIsBusy(&ftdipp->oq_urb)) { - if (chThdEnqueueTimeoutS(&ftdipp->oq_waiting, timeout) != Q_OK) { - chSysUnlock(); - return w; - } - } - - *ftdipp->oq_ptr++ = *bp++; - if (--ftdipp->oq_counter == 0) { - _submitOutI(ftdipp, 64); - chSchRescheduleS(); - } - chSysUnlock(); /* Gives a preemption chance in a controlled point.*/ - - w++; - if (--n == 0U) - return w; - - chSysLock(); - } -} - -static msg_t _put_timeout(USBHFTDIPortDriver *ftdipp, uint8_t b, systime_t timeout) { - - chSysLock(); - if (ftdipp->state != USBHFTDIP_STATE_READY) { - chSysUnlock(); - return Q_RESET; - } - - while (usbhURBIsBusy(&ftdipp->oq_urb)) { - msg_t msg = chThdEnqueueTimeoutS(&ftdipp->oq_waiting, timeout); - if (msg < Q_OK) { - chSysUnlock(); - return msg; - } - } - - *ftdipp->oq_ptr++ = b; - if (--ftdipp->oq_counter == 0) { - _submitOutI(ftdipp, 64); - chSchRescheduleS(); - } - chSysUnlock(); - return Q_OK; -} - -static size_t _write(USBHFTDIPortDriver *ftdipp, const uint8_t *bp, size_t n) { - return _write_timeout(ftdipp, bp, n, TIME_INFINITE); -} - -static msg_t _put(USBHFTDIPortDriver *ftdipp, uint8_t b) { - return _put_timeout(ftdipp, b, TIME_INFINITE); -} - -static void _submitInI(USBHFTDIPortDriver *ftdipp) { - udbg("FTDI: Submit IN"); - usbhURBObjectResetI(&ftdipp->iq_urb); - usbhURBSubmitI(&ftdipp->iq_urb); -} - -static void _in_cb(usbh_urb_t *urb) { - USBHFTDIPortDriver *const ftdipp = (USBHFTDIPortDriver *)urb->userData; - switch (urb->status) { - case USBH_URBSTATUS_OK: - if (urb->actualLength < 2) { - uwarnf("FTDI: URB IN actualLength = %d, < 2", urb->actualLength); - } else if (urb->actualLength > 2) { - udbgf("FTDI: URB IN data len=%d, status=%02x %02x", - urb->actualLength - 2, - ((uint8_t *)urb->buff)[0], - ((uint8_t *)urb->buff)[1]); - ftdipp->iq_ptr = ftdipp->iq_buff + 2; - ftdipp->iq_counter = urb->actualLength - 2; - chThdDequeueNextI(&ftdipp->iq_waiting, Q_OK); - return; - } else { - udbgf("FTDI: URB IN no data, status=%02x %02x", - ((uint8_t *)urb->buff)[0], - ((uint8_t *)urb->buff)[1]); - return; - } - break; - case USBH_URBSTATUS_DISCONNECTED: - uwarn("FTDI: URB IN disconnected"); - chThdDequeueNextI(&ftdipp->iq_waiting, Q_RESET); - return; - default: - uerrf("FTDI: URB IN status unexpected = %d", urb->status); - break; - } - _submitInI(ftdipp); -} - -static size_t _read_timeout(USBHFTDIPortDriver *ftdipp, uint8_t *bp, - size_t n, systime_t timeout) { - size_t r = 0; - - chDbgCheck(n > 0U); - - chSysLock(); - while (true) { - if (ftdipp->state != USBHFTDIP_STATE_READY) { - chSysUnlock(); - return r; - } - while (ftdipp->iq_counter == 0) { - if (!usbhURBIsBusy(&ftdipp->iq_urb)) - _submitInI(ftdipp); - if (chThdEnqueueTimeoutS(&ftdipp->iq_waiting, timeout) != Q_OK) { - chSysUnlock(); - return r; - } - } - *bp++ = *ftdipp->iq_ptr++; - if (--ftdipp->iq_counter == 0) { - _submitInI(ftdipp); - chSchRescheduleS(); - } - chSysUnlock(); - - r++; - if (--n == 0U) - return r; - - chSysLock(); - } -} - -static msg_t _get_timeout(USBHFTDIPortDriver *ftdipp, systime_t timeout) { - uint8_t b; - - chSysLock(); - if (ftdipp->state != USBHFTDIP_STATE_READY) { - chSysUnlock(); - return Q_RESET; - } - while (ftdipp->iq_counter == 0) { - if (!usbhURBIsBusy(&ftdipp->iq_urb)) - _submitInI(ftdipp); - msg_t msg = chThdEnqueueTimeoutS(&ftdipp->iq_waiting, timeout); - if (msg < Q_OK) { - chSysUnlock(); - return msg; - } - } - b = *ftdipp->iq_ptr++; - if (--ftdipp->iq_counter == 0) { - _submitInI(ftdipp); - chSchRescheduleS(); - } - chSysUnlock(); - - return (msg_t)b; -} - -static msg_t _get(USBHFTDIPortDriver *ftdipp) { - return _get_timeout(ftdipp, TIME_INFINITE); -} - -static size_t _read(USBHFTDIPortDriver *ftdipp, uint8_t *bp, size_t n) { - return _read_timeout(ftdipp, bp, n, TIME_INFINITE); -} - -static void _vt(void *p) { - USBHFTDIPortDriver *const ftdipp = (USBHFTDIPortDriver *)p; - chSysLockFromISR(); - uint32_t len = ftdipp->oq_ptr - ftdipp->oq_buff; - if (len && !usbhURBIsBusy(&ftdipp->oq_urb)) { - _submitOutI(ftdipp, len); - } - if ((ftdipp->iq_counter == 0) && !usbhURBIsBusy(&ftdipp->iq_urb)) { - _submitInI(ftdipp); - } - chVTSetI(&ftdipp->vt, MS2ST(16), _vt, ftdipp); - chSysUnlockFromISR(); -} - -static const struct FTDIPortDriverVMT async_channel_vmt = { - (size_t (*)(void *, const uint8_t *, size_t))_write, - (size_t (*)(void *, uint8_t *, size_t))_read, - (msg_t (*)(void *, uint8_t))_put, - (msg_t (*)(void *))_get, - (msg_t (*)(void *, uint8_t, systime_t))_put_timeout, - (msg_t (*)(void *, systime_t))_get_timeout, - (size_t (*)(void *, const uint8_t *, size_t, systime_t))_write_timeout, - (size_t (*)(void *, uint8_t *, size_t, systime_t))_read_timeout -}; - - -static void _stop(USBHFTDIPortDriver *ftdipp) { - osalSysLock(); - chVTResetI(&ftdipp->vt); - usbhEPCloseS(&ftdipp->epin); - usbhEPCloseS(&ftdipp->epout); - chThdDequeueAllI(&ftdipp->iq_waiting, Q_RESET); - chThdDequeueAllI(&ftdipp->oq_waiting, Q_RESET); - osalOsRescheduleS(); - ftdipp->state = USBHFTDIP_STATE_ACTIVE; - osalSysUnlock(); -} - -void usbhftdipStop(USBHFTDIPortDriver *ftdipp) { - osalDbgCheck((ftdipp->state == USBHFTDIP_STATE_ACTIVE) - || (ftdipp->state == USBHFTDIP_STATE_READY)); - - if (ftdipp->state == USBHFTDIP_STATE_ACTIVE) { - return; - } - - osalMutexLock(&ftdipp->ftdip->mtx); - _stop(ftdipp); - osalMutexUnlock(&ftdipp->ftdip->mtx); -} - -void usbhftdipStart(USBHFTDIPortDriver *ftdipp, const USBHFTDIPortConfig *config) { - static const USBHFTDIPortConfig default_config = { - HAL_USBHFTDI_DEFAULT_SPEED, - HAL_USBHFTDI_DEFAULT_FRAMING, - HAL_USBHFTDI_DEFAULT_HANDSHAKE, - HAL_USBHFTDI_DEFAULT_XON, - HAL_USBHFTDI_DEFAULT_XOFF - }; - - osalDbgCheck((ftdipp->state == USBHFTDIP_STATE_ACTIVE) - || (ftdipp->state == USBHFTDIP_STATE_READY)); - - if (ftdipp->state == USBHFTDIP_STATE_READY) - return; - - osalMutexLock(&ftdipp->ftdip->mtx); - if (config == NULL) - config = &default_config; - - uint16_t wValue = 0; - _ftdi_port_control(ftdipp, FTDI_COMMAND_RESET, FTDI_RESET_ALL, 0, 0, NULL); - _set_baudrate(ftdipp, config->speed); - _ftdi_port_control(ftdipp, FTDI_COMMAND_SETDATA, config->framing, 0, 0, NULL); - if (config->handshake & USBHFTDI_HANDSHAKE_XON_XOFF) - wValue = (config->xoff_character << 8) | config->xon_character; - _ftdi_port_control(ftdipp, FTDI_COMMAND_SETFLOW, wValue, config->handshake, 0, NULL); - - usbhURBObjectInit(&ftdipp->oq_urb, &ftdipp->epout, _out_cb, ftdipp, ftdipp->oq_buff, 0); - chThdQueueObjectInit(&ftdipp->oq_waiting); - ftdipp->oq_counter = 64; - ftdipp->oq_ptr = ftdipp->oq_buff; - usbhEPOpen(&ftdipp->epout); - - usbhURBObjectInit(&ftdipp->iq_urb, &ftdipp->epin, _in_cb, ftdipp, ftdipp->iq_buff, 64); - chThdQueueObjectInit(&ftdipp->iq_waiting); - ftdipp->iq_counter = 0; - ftdipp->iq_ptr = ftdipp->iq_buff; - usbhEPOpen(&ftdipp->epin); - osalSysLock(); - usbhURBSubmitI(&ftdipp->iq_urb); - osalSysUnlock(); - - chVTObjectInit(&ftdipp->vt); - chVTSet(&ftdipp->vt, MS2ST(16), _vt, ftdipp); - - ftdipp->state = USBHFTDIP_STATE_READY; - osalMutexUnlock(&ftdipp->ftdip->mtx); -} - -void usbhftdiObjectInit(USBHFTDIDriver *ftdip) { - osalDbgCheck(ftdip != NULL); - memset(ftdip, 0, sizeof(*ftdip)); - ftdip->info = &usbhftdiClassDriverInfo; - osalMutexObjectInit(&ftdip->mtx); -} - -void usbhftdipObjectInit(USBHFTDIPortDriver *ftdipp) { - osalDbgCheck(ftdipp != NULL); - memset(ftdipp, 0, sizeof(*ftdipp)); - ftdipp->vmt = &async_channel_vmt; - ftdipp->state = USBHFTDIP_STATE_STOP; -} - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_hub.c b/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_hub.c deleted file mode 100644 index 7fdcef1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_hub.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" -#include "hal_usbh.h" -#include "usbh/internal.h" - -#if HAL_USBH_USE_HUB - -#if !HAL_USE_USBH -#error "USBHHUB needs HAL_USE_USBH" -#endif - -#include -#include "usbh/dev/hub.h" - -#if USBHHUB_DEBUG_ENABLE_TRACE -#define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define udbgf(f, ...) do {} while(0) -#define udbg(f, ...) do {} while(0) -#endif - -#if USBHHUB_DEBUG_ENABLE_INFO -#define uinfof(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uinfo(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uinfof(f, ...) do {} while(0) -#define uinfo(f, ...) do {} while(0) -#endif - -#if USBHHUB_DEBUG_ENABLE_WARNINGS -#define uwarnf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uwarn(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uwarnf(f, ...) do {} while(0) -#define uwarn(f, ...) do {} while(0) -#endif - -#if USBHHUB_DEBUG_ENABLE_ERRORS -#define uerrf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uerr(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uerrf(f, ...) do {} while(0) -#define uerr(f, ...) do {} while(0) -#endif - - -USBHHubDriver USBHHUBD[HAL_USBHHUB_MAX_INSTANCES]; -usbh_port_t USBHPorts[HAL_USBHHUB_MAX_PORTS]; - -static usbh_baseclassdriver_t *hub_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem); -static void hub_unload(usbh_baseclassdriver_t *drv); -static const usbh_classdriver_vmt_t usbhhubClassDriverVMT = { - hub_load, - hub_unload -}; -const usbh_classdriverinfo_t usbhhubClassDriverInfo = { - 0x09, 0x00, -1, "HUB", &usbhhubClassDriverVMT -}; - - -void _usbhub_port_object_init(usbh_port_t *port, USBHDriver *usbh, - USBHHubDriver *hub, uint8_t number) { - memset(port, 0, sizeof(*port)); - port->number = number; - port->device.host = usbh; - port->hub = hub; -} - -usbh_urbstatus_t usbhhubControlRequest(USBHDriver *host, USBHHubDriver *hub, - uint8_t bmRequestType, - uint8_t bRequest, - uint16_t wValue, - uint16_t wIndex, - uint16_t wLength, - uint8_t *buf) { - if (hub == NULL) - return usbh_lld_root_hub_request(host, bmRequestType, bRequest, wValue, wIndex, wLength, buf); - - return usbhControlRequest(hub->dev, - bmRequestType, bRequest, wValue, wIndex, wLength, buf); -} - - -static void _urb_complete(usbh_urb_t *urb) { - - USBHHubDriver *const hubdp = (USBHHubDriver *)urb->userData; - switch (urb->status) { - case USBH_URBSTATUS_TIMEOUT: - /* the device NAKed */ - udbg("HUB: no info"); - hubdp->statuschange = 0; - break; - case USBH_URBSTATUS_OK: { - uint8_t len = hubdp->hubDesc.bNbrPorts / 8 + 1; - if (urb->actualLength != len) { - uwarnf("Expected %d status change bytes but got %d", len, urb->actualLength); - } - - if (urb->actualLength < len) - len = urb->actualLength; - - if (len > 4) - len = 4; - - uint8_t *sc = (uint8_t *)&hubdp->statuschange; - uint8_t *r = hubdp->scbuff; - while (len--) - *sc++ |= *r++; - - uinfof("HUB: change, %08x", hubdp->statuschange); - } break; - case USBH_URBSTATUS_DISCONNECTED: - uwarn("HUB: URB disconnected, aborting poll"); - return; - default: - uerrf("HUB: URB status unexpected = %d", urb->status); - break; - } - - usbhURBObjectResetI(urb); - usbhURBSubmitI(urb); -} - -static usbh_baseclassdriver_t *hub_load(usbh_device_t *dev, - const uint8_t *descriptor, uint16_t rem) { - int i; - - USBHHubDriver *hubdp; - - if ((rem < descriptor[0]) || (descriptor[1] != USBH_DT_DEVICE)) - return NULL; - - if (dev->devDesc.bDeviceProtocol != 0) - return NULL; - - generic_iterator_t iep, icfg; - if_iterator_t iif; - - cfg_iter_init(&icfg, dev->fullConfigurationDescriptor, - dev->basicConfigDesc.wTotalLength); - - if_iter_init(&iif, &icfg); - if (!iif.valid) - return NULL; - const usbh_interface_descriptor_t *const ifdesc = if_get(&iif); - if ((ifdesc->bInterfaceClass != 0x09) - || (ifdesc->bInterfaceSubClass != 0x00) - || (ifdesc->bInterfaceProtocol != 0x00)) { - return NULL; - } - - ep_iter_init(&iep, &iif); - if (!iep.valid) - return NULL; - const usbh_endpoint_descriptor_t *const epdesc = ep_get(&iep); - if ((epdesc->bmAttributes & 0x03) != USBH_EPTYPE_INT) { - return NULL; - } - - - /* alloc driver */ - for (i = 0; i < HAL_USBHHUB_MAX_INSTANCES; i++) { - if (USBHHUBD[i].dev == NULL) { - hubdp = &USBHHUBD[i]; - goto alloc_ok; - } - } - - uwarn("Can't alloc HUB driver"); - - /* can't alloc */ - return NULL; - -alloc_ok: - /* initialize the driver's variables */ - hubdp->epint.status = USBH_EPSTATUS_UNINITIALIZED; - hubdp->dev = dev; - hubdp->ports = 0; - - usbhEPSetName(&dev->ctrl, "HUB[CTRL]"); - - /* read Hub descriptor */ - uinfo("Read Hub descriptor"); - if (usbhhubControlRequest(dev->host, hubdp, - USBH_REQTYPE_IN | USBH_REQTYPE_CLASS | USBH_REQTYPE_DEVICE, - USBH_REQ_GET_DESCRIPTOR, - (USBH_DT_HUB << 8), 0, sizeof(hubdp->hubDesc), - (uint8_t *)&hubdp->hubDesc) != USBH_URBSTATUS_OK) { - hubdp->dev = NULL; - return NULL; - } - - const usbh_hub_descriptor_t *const hubdesc = &hubdp->hubDesc; - - uinfof("Hub descriptor loaded; %d ports, wHubCharacteristics=%04x, bPwrOn2PwrGood=%d, bHubContrCurrent=%d", - hubdesc->bNbrPorts, - hubdesc->wHubCharacteristics, - hubdesc->bPwrOn2PwrGood, - hubdesc->bHubContrCurrent); - - /* Alloc ports */ - uint8_t ports = hubdesc->bNbrPorts; - for (i = 0; (ports > 0) && (i < HAL_USBHHUB_MAX_PORTS); i++) { - if (USBHPorts[i].hub == NULL) { - uinfof("Alloc port %d", ports); - _usbhub_port_object_init(&USBHPorts[i], dev->host, hubdp, ports); - USBHPorts[i].next = hubdp->ports; - hubdp->ports = &USBHPorts[i]; - --ports; - } - } - - if (ports) { - uwarn("Could not alloc all ports"); - } - - /* link hub to the host's list */ - list_add_tail(&hubdp->node, &dev->host->hubs); - - /* enable power to ports */ - usbh_port_t *port = hubdp->ports; - while (port) { - uinfof("Enable power for port %d", port->number); - usbhhubSetFeaturePort(port, USBH_PORT_FEAT_POWER); - port = port->next; - } - - if (hubdesc->bPwrOn2PwrGood) - osalThreadSleepMilliseconds(2 * hubdesc->bPwrOn2PwrGood); - - /* initialize the status change endpoint and trigger the first transfer */ - usbhEPObjectInit(&hubdp->epint, dev, epdesc); - usbhEPSetName(&hubdp->epint, "HUB[INT ]"); - usbhEPOpen(&hubdp->epint); - - usbhURBObjectInit(&hubdp->urb, &hubdp->epint, - _urb_complete, hubdp, hubdp->scbuff, - (hubdesc->bNbrPorts + 8) / 8); - - osalSysLock(); - usbhURBSubmitI(&hubdp->urb); - osalOsRescheduleS(); - osalSysUnlock(); - - return (usbh_baseclassdriver_t *)hubdp; -} - -static void hub_unload(usbh_baseclassdriver_t *drv) { - osalDbgCheck(drv != NULL); - USBHHubDriver *const hubdp = (USBHHubDriver *)drv; - - /* close the status change endpoint (this cancels ongoing URBs) */ - osalSysLock(); - usbhEPCloseS(&hubdp->epint); - osalSysUnlock(); - - /* de-alloc ports and unload drivers */ - usbh_port_t *port = hubdp->ports; - while (port) { - _usbh_port_disconnected(port); - port->hub = NULL; - port = port->next; - } - - /* unlink the hub from the host's list */ - list_del(&hubdp->node); - -} - -void usbhhubObjectInit(USBHHubDriver *hubdp) { - osalDbgCheck(hubdp != NULL); - memset(hubdp, 0, sizeof(*hubdp)); - hubdp->info = &usbhhubClassDriverInfo; -} -#else - -#if HAL_USE_USBH -void _usbhub_port_object_init(usbh_port_t *port, USBHDriver *usbh, uint8_t number) { - memset(port, 0, sizeof(*port)); - port->number = number; - port->device.host = usbh; -} -#endif - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_msd.c b/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_msd.c deleted file mode 100644 index 6869a74..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_msd.c +++ /dev/null @@ -1,939 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" -#include "hal_usbh.h" - -#if HAL_USBH_USE_MSD - -#if !HAL_USE_USBH -#error "USBHMSD needs USBH" -#endif - -#include -#include "usbh/dev/msd.h" -#include "usbh/internal.h" - -//#pragma GCC optimize("Og") - - -#if USBHMSD_DEBUG_ENABLE_TRACE -#define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define udbgf(f, ...) do {} while(0) -#define udbg(f, ...) do {} while(0) -#endif - -#if USBHMSD_DEBUG_ENABLE_INFO -#define uinfof(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uinfo(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uinfof(f, ...) do {} while(0) -#define uinfo(f, ...) do {} while(0) -#endif - -#if USBHMSD_DEBUG_ENABLE_WARNINGS -#define uwarnf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uwarn(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uwarnf(f, ...) do {} while(0) -#define uwarn(f, ...) do {} while(0) -#endif - -#if USBHMSD_DEBUG_ENABLE_ERRORS -#define uerrf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uerr(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uerrf(f, ...) do {} while(0) -#define uerr(f, ...) do {} while(0) -#endif - - - - - -/*===========================================================================*/ -/* USB Class driver loader for MSD */ -/*===========================================================================*/ - -USBHMassStorageDriver USBHMSD[HAL_USBHMSD_MAX_INSTANCES]; - -static usbh_baseclassdriver_t *_msd_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem); -static void _msd_unload(usbh_baseclassdriver_t *drv); - -static const usbh_classdriver_vmt_t class_driver_vmt = { - _msd_load, - _msd_unload -}; - -const usbh_classdriverinfo_t usbhmsdClassDriverInfo = { - 0x08, 0x06, 0x50, "MSD", &class_driver_vmt -}; - -#define MSD_REQ_RESET 0xFF -#define MSD_GET_MAX_LUN 0xFE - -static usbh_baseclassdriver_t *_msd_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem) { - int i; - USBHMassStorageDriver *msdp; - uint8_t luns; // should declare it here to eliminate 'control bypass initialization' warning - usbh_urbstatus_t stat; // should declare it here to eliminate 'control bypass initialization' warning - - if ((rem < descriptor[0]) || (descriptor[1] != USBH_DT_INTERFACE)) - return NULL; - - const usbh_interface_descriptor_t * const ifdesc = (const usbh_interface_descriptor_t *)descriptor; - - if ((ifdesc->bAlternateSetting != 0) - || (ifdesc->bNumEndpoints < 2) - || (ifdesc->bInterfaceSubClass != 0x06) - || (ifdesc->bInterfaceProtocol != 0x50)) { - return NULL; - } - - /* alloc driver */ - for (i = 0; i < HAL_USBHMSD_MAX_INSTANCES; i++) { - if (USBHMSD[i].dev == NULL) { - msdp = &USBHMSD[i]; - goto alloc_ok; - } - } - - uwarn("Can't alloc MSD driver"); - - /* can't alloc */ - return NULL; - -alloc_ok: - /* initialize the driver's variables */ - msdp->epin.status = USBH_EPSTATUS_UNINITIALIZED; - msdp->epout.status = USBH_EPSTATUS_UNINITIALIZED; - msdp->max_lun = 0; - msdp->tag = 0; - msdp->luns = 0; - msdp->ifnum = ifdesc->bInterfaceNumber; - usbhEPSetName(&dev->ctrl, "MSD[CTRL]"); - - /* parse the configuration descriptor */ - if_iterator_t iif; - generic_iterator_t iep; - iif.iad = 0; - iif.curr = descriptor; - iif.rem = rem; - for (ep_iter_init(&iep, &iif); iep.valid; ep_iter_next(&iep)) { - const usbh_endpoint_descriptor_t *const epdesc = ep_get(&iep); - if ((epdesc->bEndpointAddress & 0x80) && (epdesc->bmAttributes == USBH_EPTYPE_BULK)) { - uinfof("BULK IN endpoint found: bEndpointAddress=%02x", epdesc->bEndpointAddress); - usbhEPObjectInit(&msdp->epin, dev, epdesc); - usbhEPSetName(&msdp->epin, "MSD[BIN ]"); - } else if (((epdesc->bEndpointAddress & 0x80) == 0) - && (epdesc->bmAttributes == USBH_EPTYPE_BULK)) { - uinfof("BULK OUT endpoint found: bEndpointAddress=%02x", epdesc->bEndpointAddress); - usbhEPObjectInit(&msdp->epout, dev, epdesc); - usbhEPSetName(&msdp->epout, "MSD[BOUT]"); - } else { - uinfof("unsupported endpoint found: bEndpointAddress=%02x, bmAttributes=%02x", - epdesc->bEndpointAddress, epdesc->bmAttributes); - } - } - if ((msdp->epin.status != USBH_EPSTATUS_CLOSED) || (msdp->epout.status != USBH_EPSTATUS_CLOSED)) { - goto deinit; - } - - /* read the number of LUNs */ - uinfo("Reading Max LUN:"); - USBH_DEFINE_BUFFER(uint8_t, buff[4]); - stat = usbhControlRequest(dev, - USBH_CLASSIN(USBH_REQTYPE_INTERFACE, MSD_GET_MAX_LUN, 0, msdp->ifnum), - 1, buff); - if (stat == USBH_URBSTATUS_OK) { - msdp->max_lun = buff[0] + 1; - uinfof("\tmax_lun = %d", msdp->max_lun); - if (msdp->max_lun > HAL_USBHMSD_MAX_LUNS) { - msdp->max_lun = HAL_USBHMSD_MAX_LUNS; - uwarnf("\tUsing max_lun = %d", msdp->max_lun); - } - } else if (stat == USBH_URBSTATUS_STALL) { - uwarn("\tStall, max_lun = 1"); - msdp->max_lun = 1; - } else { - uerr("\tError"); - goto deinit; - } - - /* open the bulk IN/OUT endpoints */ - usbhEPOpen(&msdp->epin); - usbhEPOpen(&msdp->epout); - - /* Alloc one block device per logical unit found */ - luns = msdp->max_lun; - for (i = 0; (luns > 0) && (i < HAL_USBHMSD_MAX_LUNS); i++) { - if (MSBLKD[i].msdp == NULL) { - /* link the new block driver to the list */ - MSBLKD[i].next = msdp->luns; - msdp->luns = &MSBLKD[i]; - MSBLKD[i].msdp = msdp; - - osalSysLock(); - MSBLKD[i].state = BLK_ACTIVE; /* transition directly to active, instead of BLK_STOP */ - osalSysUnlock(); - - /* connect the LUN (TODO: review if it's best to leave the LUN disconnected) */ - usbhmsdLUNConnect(&MSBLKD[i]); - luns--; - } - } - - return (usbh_baseclassdriver_t *)msdp; - -deinit: - /* Here, the enpoints are closed, and the driver is unlinked */ - return NULL; -} - -static void _msd_unload(usbh_baseclassdriver_t *drv) { - osalDbgCheck(drv != NULL); - USBHMassStorageDriver *const msdp = (USBHMassStorageDriver *)drv; - USBHMassStorageLUNDriver *lunp = msdp->luns; - - osalMutexLock(&msdp->mtx); - osalSysLock(); - usbhEPCloseS(&msdp->epin); - usbhEPCloseS(&msdp->epout); - while (lunp) { - lunp->state = BLK_STOP; - lunp = lunp->next; - } - osalSysUnlock(); - osalMutexUnlock(&msdp->mtx); - - /* now that the LUNs are idle, deinit them */ - lunp = msdp->luns; - osalSysLock(); - while (lunp) { - usbhmsdLUNObjectInit(lunp); - lunp = lunp->next; - } - osalSysUnlock(); -} - - -/*===========================================================================*/ -/* MSD Class driver operations (Bulk-Only transport) */ -/*===========================================================================*/ - - - -/* USB Bulk Only Transport SCSI Command block wrapper */ -PACKED_STRUCT { - uint32_t dCBWSignature; - uint32_t dCBWTag; - uint32_t dCBWDataTransferLength; - uint8_t bmCBWFlags; - uint8_t bCBWLUN; - uint8_t bCBWCBLength; - uint8_t CBWCB[16]; -} msd_cbw_t; -#define MSD_CBW_SIGNATURE 0x43425355 -#define MSD_CBWFLAGS_D2H 0x80 -#define MSD_CBWFLAGS_H2D 0x00 - - -/* USB Bulk Only Transport SCSI Command status wrapper */ -PACKED_STRUCT { - uint32_t dCSWSignature; - uint32_t dCSWTag; - uint32_t dCSWDataResidue; - uint8_t bCSWStatus; -} msd_csw_t; -#define MSD_CSW_SIGNATURE 0x53425355 - - -typedef union { - msd_cbw_t cbw; - msd_csw_t csw; -} msd_transaction_t; - -typedef enum { - MSD_TRANSACTIONRESULT_OK, - MSD_TRANSACTIONRESULT_DISCONNECTED, - MSD_TRANSACTIONRESULT_STALL, - MSD_TRANSACTIONRESULT_BUS_ERROR, - MSD_TRANSACTIONRESULT_SYNC_ERROR -} msd_transaction_result_t; - -typedef enum { - MSD_COMMANDRESULT_PASSED = 0, - MSD_COMMANDRESULT_FAILED = 1, - MSD_COMMANDRESULT_PHASE_ERROR = 2 -} msd_command_result_t; - -typedef struct { - msd_transaction_result_t tres; - msd_command_result_t cres; -} msd_result_t; - - -/* ----------------------------------------------------- */ -/* SCSI Commands */ -/* ----------------------------------------------------- */ - -/* Read 10 and Write 10 */ -#define SCSI_CMD_READ_10 0x28 -#define SCSI_CMD_WRITE_10 0x2A - -/* Request sense */ -#define SCSI_CMD_REQUEST_SENSE 0x03 -PACKED_STRUCT { - uint8_t byte[18]; -} scsi_sense_response_t; - -#define SCSI_SENSE_KEY_GOOD 0x00 -#define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01 -#define SCSI_SENSE_KEY_NOT_READY 0x02 -#define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03 -#define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04 -#define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05 -#define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06 -#define SCSI_SENSE_KEY_DATA_PROTECT 0x07 -#define SCSI_SENSE_KEY_BLANK_CHECK 0x08 -#define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09 -#define SCSI_SENSE_KEY_COPY_ABORTED 0x0A -#define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B -#define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D -#define SCSI_SENSE_KEY_MISCOMPARE 0x0E -#define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00 -#define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04 -#define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24 -#define SCSI_ASENSE_NOT_READY_TO_READY_CHANGE 0x28 -#define SCSI_ASENSE_WRITE_PROTECTED 0x27 -#define SCSI_ASENSE_FORMAT_ERROR 0x31 -#define SCSI_ASENSE_INVALID_COMMAND 0x20 -#define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21 -#define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A -#define SCSI_ASENSEQ_NO_QUALIFIER 0x00 -#define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01 -#define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02 -#define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07 - -/* Inquiry */ -#define SCSI_CMD_INQUIRY 0x12 -PACKED_STRUCT { - uint8_t peripheral; - uint8_t removable; - uint8_t version; - uint8_t response_data_format; - uint8_t additional_length; - uint8_t sccstp; - uint8_t bqueetc; - uint8_t cmdque; - uint8_t vendorID[8]; - uint8_t productID[16]; - uint8_t productRev[4]; -} scsi_inquiry_response_t; - -/* Read Capacity 10 */ -#define SCSI_CMD_READ_CAPACITY_10 0x25 -PACKED_STRUCT { - uint32_t last_block_addr; - uint32_t block_size; -} scsi_readcapacity10_response_t; - -/* Start/Stop Unit */ -#define SCSI_CMD_START_STOP_UNIT 0x1B -PACKED_STRUCT { - uint8_t op_code; - uint8_t lun_immed; - uint8_t res1; - uint8_t res2; - uint8_t loej_start; - uint8_t control; -} scsi_startstopunit_request_t; - -/* test unit ready */ -#define SCSI_CMD_TEST_UNIT_READY 0x00 - -/* Other commands, TODO: use or remove them -#define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E -#define SCSI_CMD_VERIFY_10 0x2F -#define SCSI_CMD_SEND_DIAGNOSTIC 0x1D -#define SCSI_CMD_MODE_SENSE_6 0x1A -*/ - -static inline void _prepare_cbw(msd_transaction_t *tran, USBHMassStorageLUNDriver *lunp) { - tran->cbw.bCBWLUN = (uint8_t)(lunp - &lunp->msdp->luns[0]); - memset(&tran->cbw.CBWCB, 0, sizeof(tran->cbw.CBWCB)); -} - -static msd_transaction_result_t _msd_transaction(msd_transaction_t *tran, USBHMassStorageLUNDriver *lunp, void *data) { - - uint32_t actual_len; - usbh_urbstatus_t status; - - tran->cbw.dCBWSignature = MSD_CBW_SIGNATURE; - tran->cbw.dCBWTag = ++lunp->msdp->tag; - - /* control phase */ - status = usbhBulkTransfer(&lunp->msdp->epout, &tran->cbw, - sizeof(tran->cbw), &actual_len, MS2ST(1000)); - - if (status == USBH_URBSTATUS_CANCELLED) { - uerr("\tMSD: Control phase: USBH_URBSTATUS_CANCELLED"); - return MSD_TRANSACTIONRESULT_DISCONNECTED; - } else if (status == USBH_URBSTATUS_STALL) { - uerr("\tMSD: Control phase: USBH_URBSTATUS_STALL"); - return MSD_TRANSACTIONRESULT_STALL; - } else if (status != USBH_URBSTATUS_OK) { - uerrf("\tMSD: Control phase: status = %d, != OK", status); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } else if (actual_len != sizeof(tran->cbw)) { - uerrf("\tMSD: Control phase: wrong actual_len = %d", actual_len); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } - - - /* data phase */ - if (tran->cbw.dCBWDataTransferLength) { - status = usbhBulkTransfer( - tran->cbw.bmCBWFlags & MSD_CBWFLAGS_D2H ? &lunp->msdp->epin : &lunp->msdp->epout, - data, - tran->cbw.dCBWDataTransferLength, - &actual_len, MS2ST(20000)); - - if (status == USBH_URBSTATUS_CANCELLED) { - uerr("\tMSD: Data phase: USBH_URBSTATUS_CANCELLED"); - return MSD_TRANSACTIONRESULT_DISCONNECTED; - } else if (status == USBH_URBSTATUS_STALL) { - uerr("\tMSD: Data phase: USBH_URBSTATUS_STALL"); - return MSD_TRANSACTIONRESULT_STALL; - } else if (status != USBH_URBSTATUS_OK) { - uerrf("\tMSD: Data phase: status = %d, != OK", status); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } else if (actual_len != tran->cbw.dCBWDataTransferLength) { - uerrf("\tMSD: Data phase: wrong actual_len = %d", actual_len); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } - } - - - /* status phase */ - status = usbhBulkTransfer(&lunp->msdp->epin, &tran->csw, - sizeof(tran->csw), &actual_len, MS2ST(1000)); - - if (status == USBH_URBSTATUS_CANCELLED) { - uerr("\tMSD: Status phase: USBH_URBSTATUS_CANCELLED"); - return MSD_TRANSACTIONRESULT_DISCONNECTED; - } else if (status == USBH_URBSTATUS_STALL) { - uerr("\tMSD: Status phase: USBH_URBSTATUS_STALL"); - return MSD_TRANSACTIONRESULT_STALL; - } else if (status != USBH_URBSTATUS_OK) { - uerrf("\tMSD: Status phase: status = %d, != OK", status); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } else if (actual_len != sizeof(tran->csw)) { - uerrf("\tMSD: Status phase: wrong actual_len = %d", actual_len); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } else if (tran->csw.dCSWSignature != MSD_CSW_SIGNATURE) { - uerr("\tMSD: Status phase: wrong signature"); - return MSD_TRANSACTIONRESULT_BUS_ERROR; - } else if (tran->csw.dCSWTag != lunp->msdp->tag) { - uerrf("\tMSD: Status phase: wrong tag (expected %d, got %d)", - lunp->msdp->tag, tran->csw.dCSWTag); - return MSD_TRANSACTIONRESULT_SYNC_ERROR; - } - - if (tran->csw.dCSWDataResidue) { - uwarnf("\tMSD: Residue=%d", tran->csw.dCSWDataResidue); - } - - return MSD_TRANSACTIONRESULT_OK; -} - - -static msd_result_t scsi_inquiry(USBHMassStorageLUNDriver *lunp, scsi_inquiry_response_t *resp) { - msd_transaction_t transaction; - msd_result_t res; - - _prepare_cbw(&transaction, lunp); - transaction.cbw.dCBWDataTransferLength = sizeof(scsi_inquiry_response_t); - transaction.cbw.bmCBWFlags = MSD_CBWFLAGS_D2H; - transaction.cbw.bCBWCBLength = 6; - transaction.cbw.CBWCB[0] = SCSI_CMD_INQUIRY; - transaction.cbw.CBWCB[4] = sizeof(scsi_inquiry_response_t); - - res.tres = _msd_transaction(&transaction, lunp, resp); - if (res.tres == MSD_TRANSACTIONRESULT_OK) { - res.cres = (msd_command_result_t) transaction.csw.bCSWStatus; - } - return res; -} - -static msd_result_t scsi_requestsense(USBHMassStorageLUNDriver *lunp, scsi_sense_response_t *resp) { - msd_transaction_t transaction; - msd_result_t res; - - _prepare_cbw(&transaction, lunp); - transaction.cbw.dCBWDataTransferLength = sizeof(scsi_sense_response_t); - transaction.cbw.bmCBWFlags = MSD_CBWFLAGS_D2H; - transaction.cbw.bCBWCBLength = 12; - transaction.cbw.CBWCB[0] = SCSI_CMD_REQUEST_SENSE; - transaction.cbw.CBWCB[4] = sizeof(scsi_sense_response_t); - - res.tres = _msd_transaction(&transaction, lunp, resp); - if (res.tres == MSD_TRANSACTIONRESULT_OK) { - res.cres = (msd_command_result_t) transaction.csw.bCSWStatus; - } - return res; -} - -static msd_result_t scsi_testunitready(USBHMassStorageLUNDriver *lunp) { - msd_transaction_t transaction; - msd_result_t res; - - _prepare_cbw(&transaction, lunp); - transaction.cbw.dCBWDataTransferLength = 0; - transaction.cbw.bmCBWFlags = MSD_CBWFLAGS_D2H; - transaction.cbw.bCBWCBLength = 6; - transaction.cbw.CBWCB[0] = SCSI_CMD_TEST_UNIT_READY; - - res.tres = _msd_transaction(&transaction, lunp, NULL); - if (res.tres == MSD_TRANSACTIONRESULT_OK) { - res.cres = (msd_command_result_t) transaction.csw.bCSWStatus; - } - return res; -} - -static msd_result_t scsi_readcapacity10(USBHMassStorageLUNDriver *lunp, scsi_readcapacity10_response_t *resp) { - msd_transaction_t transaction; - msd_result_t res; - - _prepare_cbw(&transaction, lunp); - transaction.cbw.dCBWDataTransferLength = sizeof(scsi_readcapacity10_response_t); - transaction.cbw.bmCBWFlags = MSD_CBWFLAGS_D2H; - transaction.cbw.bCBWCBLength = 12; - transaction.cbw.CBWCB[0] = SCSI_CMD_READ_CAPACITY_10; - - res.tres = _msd_transaction(&transaction, lunp, resp); - if (res.tres == MSD_TRANSACTIONRESULT_OK) { - res.cres = (msd_command_result_t) transaction.csw.bCSWStatus; - } - return res; -} - - -static msd_result_t scsi_read10(USBHMassStorageLUNDriver *lunp, uint32_t lba, uint16_t n, uint8_t *data) { - msd_transaction_t transaction; - msd_result_t res; - - _prepare_cbw(&transaction, lunp); - transaction.cbw.dCBWDataTransferLength = n * lunp->info.blk_size; - transaction.cbw.bmCBWFlags = MSD_CBWFLAGS_D2H; - transaction.cbw.bCBWCBLength = 10; - transaction.cbw.CBWCB[0] = SCSI_CMD_READ_10; - transaction.cbw.CBWCB[2] = (uint8_t)(lba >> 24); - transaction.cbw.CBWCB[3] = (uint8_t)(lba >> 16); - transaction.cbw.CBWCB[4] = (uint8_t)(lba >> 8); - transaction.cbw.CBWCB[5] = (uint8_t)(lba); - transaction.cbw.CBWCB[7] = (uint8_t)(n >> 8); - transaction.cbw.CBWCB[8] = (uint8_t)(n); - - res.tres = _msd_transaction(&transaction, lunp, data); - if (res.tres == MSD_TRANSACTIONRESULT_OK) { - res.cres = (msd_command_result_t) transaction.csw.bCSWStatus; - } - return res; -} - -static msd_result_t scsi_write10(USBHMassStorageLUNDriver *lunp, uint32_t lba, uint16_t n, const uint8_t *data) { - msd_transaction_t transaction; - msd_result_t res; - - _prepare_cbw(&transaction, lunp); - transaction.cbw.dCBWDataTransferLength = n * lunp->info.blk_size; - transaction.cbw.bmCBWFlags = MSD_CBWFLAGS_H2D; - transaction.cbw.bCBWCBLength = 10; - transaction.cbw.CBWCB[0] = SCSI_CMD_WRITE_10; - transaction.cbw.CBWCB[2] = (uint8_t)(lba >> 24); - transaction.cbw.CBWCB[3] = (uint8_t)(lba >> 16); - transaction.cbw.CBWCB[4] = (uint8_t)(lba >> 8); - transaction.cbw.CBWCB[5] = (uint8_t)(lba); - transaction.cbw.CBWCB[7] = (uint8_t)(n >> 8); - transaction.cbw.CBWCB[8] = (uint8_t)(n); - - res.tres = _msd_transaction(&transaction, lunp, (uint8_t *)data); - if (res.tres == MSD_TRANSACTIONRESULT_OK) { - res.cres = (msd_command_result_t) transaction.csw.bCSWStatus; - } - return res; -} - - - -/*===========================================================================*/ -/* Block driver data/functions */ -/*===========================================================================*/ - -USBHMassStorageLUNDriver MSBLKD[HAL_USBHMSD_MAX_LUNS]; - -static const struct USBHMassStorageDriverVMT blk_vmt = { - (bool (*)(void *))usbhmsdLUNIsInserted, - (bool (*)(void *))usbhmsdLUNIsProtected, - (bool (*)(void *))usbhmsdLUNConnect, - (bool (*)(void *))usbhmsdLUNDisconnect, - (bool (*)(void *, uint32_t, uint8_t *, uint32_t))usbhmsdLUNRead, - (bool (*)(void *, uint32_t, const uint8_t *, uint32_t))usbhmsdLUNWrite, - (bool (*)(void *))usbhmsdLUNSync, - (bool (*)(void *, BlockDeviceInfo *))usbhmsdLUNGetInfo -}; - - - -static uint32_t _requestsense(USBHMassStorageLUNDriver *lunp) { - scsi_sense_response_t sense; - msd_result_t res; - - res = scsi_requestsense(lunp, &sense); - if (res.tres != MSD_TRANSACTIONRESULT_OK) { - uerr("\tREQUEST SENSE: Transaction error"); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_FAILED) { - uerr("\tREQUEST SENSE: Command Failed"); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_PHASE_ERROR) { - //TODO: Do reset, etc. - uerr("\tREQUEST SENSE: Command Phase Error"); - goto failed; - } - - uerrf("\tREQUEST SENSE: Sense key=%x, ASC=%02x, ASCQ=%02x", - sense.byte[2] & 0xf, sense.byte[12], sense.byte[13]); - - return (sense.byte[2] & 0xf) | (sense.byte[12] << 8) | (sense.byte[13] << 16); - -failed: - return 0xffffffff; -} - -void usbhmsdLUNObjectInit(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - memset(lunp, 0, sizeof(*lunp)); - lunp->vmt = &blk_vmt; - lunp->state = BLK_STOP; - /* Unnecessary because of the memset: - lunp->msdp = NULL; - lunp->next = NULL; - lunp->info.* = 0; - */ -} - -void usbhmsdLUNStart(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - osalSysLock(); - osalDbgAssert((lunp->state == BLK_STOP) || (lunp->state == BLK_ACTIVE), - "invalid state"); - //TODO: complete - //lunp->state = BLK_ACTIVE; - osalSysUnlock(); -} - -void usbhmsdLUNStop(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - osalSysLock(); - osalDbgAssert((lunp->state == BLK_STOP) || (lunp->state == BLK_ACTIVE), - "invalid state"); - //TODO: complete - //lunp->state = BLK_STOP; - osalSysUnlock(); -} - -bool usbhmsdLUNConnect(USBHMassStorageLUNDriver *lunp) { - USBHMassStorageDriver *const msdp = lunp->msdp; - msd_result_t res; - - osalDbgCheck(msdp != NULL); - osalSysLock(); - //osalDbgAssert((lunp->state == BLK_ACTIVE) || (lunp->state == BLK_READY), - // "invalid state"); - if (lunp->state == BLK_READY) { - osalSysUnlock(); - return HAL_SUCCESS; - } else if (lunp->state != BLK_ACTIVE) { - osalSysUnlock(); - return HAL_FAILED; - } - lunp->state = BLK_CONNECTING; - osalSysUnlock(); - - osalMutexLock(&msdp->mtx); - - USBH_DEFINE_BUFFER(union { - scsi_inquiry_response_t inq; - scsi_readcapacity10_response_t cap; }, u); - - uinfo("INQUIRY..."); - res = scsi_inquiry(lunp, &u.inq); - if (res.tres != MSD_TRANSACTIONRESULT_OK) { - uerr("\tINQUIRY: Transaction error"); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_FAILED) { - uerr("\tINQUIRY: Command Failed"); - _requestsense(lunp); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_PHASE_ERROR) { - //TODO: Do reset, etc. - uerr("\tINQUIRY: Command Phase Error"); - goto failed; - } - - uinfof("\tPDT=%02x", u.inq.peripheral & 0x1f); - if (u.inq.peripheral != 0) { - uerr("\tUnsupported PDT"); - goto failed; - } - - // Test if unit ready - uint8_t i; - for (i = 0; i < 10; i++) { - uinfo("TEST UNIT READY..."); - res = scsi_testunitready(lunp); - if (res.tres != MSD_TRANSACTIONRESULT_OK) { - uerr("\tTEST UNIT READY: Transaction error"); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_FAILED) { - uerr("\tTEST UNIT READY: Command Failed"); - _requestsense(lunp); - continue; - } else if (res.cres == MSD_COMMANDRESULT_PHASE_ERROR) { - //TODO: Do reset, etc. - uerr("\tTEST UNIT READY: Command Phase Error"); - goto failed; - } - uinfo("\tReady."); - break; - // osalThreadSleepMilliseconds(200); // will raise 'code is unreachable' warning - } - if (i == 10) goto failed; - - // Read capacity - uinfo("READ CAPACITY(10)..."); - res = scsi_readcapacity10(lunp, &u.cap); - if (res.tres != MSD_TRANSACTIONRESULT_OK) { - uerr("\tREAD CAPACITY(10): Transaction error"); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_FAILED) { - uerr("\tREAD CAPACITY(10): Command Failed"); - _requestsense(lunp); - goto failed; - } else if (res.cres == MSD_COMMANDRESULT_PHASE_ERROR) { - //TODO: Do reset, etc. - uerr("\tREAD CAPACITY(10): Command Phase Error"); - goto failed; - } - lunp->info.blk_size = __REV(u.cap.block_size); - lunp->info.blk_num = __REV(u.cap.last_block_addr) + 1; - uinfof("\tBlock size=%dbytes, blocks=%u (~%u MB)", lunp->info.blk_size, lunp->info.blk_num, - (uint32_t)(((uint64_t)lunp->info.blk_size * lunp->info.blk_num) / (1024UL * 1024UL))); - - uinfo("MSD Connected."); - - osalMutexUnlock(&msdp->mtx); - osalSysLock(); - lunp->state = BLK_READY; - osalSysUnlock(); - - return HAL_SUCCESS; - - /* Connection failed, state reset to BLK_ACTIVE.*/ -failed: - osalMutexUnlock(&msdp->mtx); - osalSysLock(); - lunp->state = BLK_ACTIVE; - osalSysUnlock(); - return HAL_FAILED; -} - - -bool usbhmsdLUNDisconnect(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - osalSysLock(); - osalDbgAssert((lunp->state == BLK_ACTIVE) || (lunp->state == BLK_READY), - "invalid state"); - if (lunp->state == BLK_ACTIVE) { - osalSysUnlock(); - return HAL_SUCCESS; - } - lunp->state = BLK_DISCONNECTING; - osalSysUnlock(); - - //TODO: complete - - osalSysLock(); - lunp->state = BLK_ACTIVE; - osalSysUnlock(); - return HAL_SUCCESS; -} - -bool usbhmsdLUNRead(USBHMassStorageLUNDriver *lunp, uint32_t startblk, - uint8_t *buffer, uint32_t n) { - - osalDbgCheck(lunp != NULL); - bool ret = HAL_FAILED; - uint16_t blocks; - msd_result_t res; - - osalSysLock(); - if (lunp->state != BLK_READY) { - osalSysUnlock(); - return ret; - } - lunp->state = BLK_READING; - osalSysUnlock(); - - osalMutexLock(&lunp->msdp->mtx); - while (n) { - if (n > 0xffff) { - blocks = 0xffff; - } else { - blocks = (uint16_t)n; - } - res = scsi_read10(lunp, startblk, blocks, buffer); - if (res.tres != MSD_TRANSACTIONRESULT_OK) { - uerr("\tREAD (10): Transaction error"); - goto exit; - } else if (res.cres == MSD_COMMANDRESULT_FAILED) { - //TODO: request sense, and act appropriately - uerr("\tREAD (10): Command Failed"); - _requestsense(lunp); - goto exit; - } else if (res.cres == MSD_COMMANDRESULT_PHASE_ERROR) { - //TODO: Do reset, etc. - uerr("\tREAD (10): Command Phase Error"); - goto exit; - } - n -= blocks; - startblk += blocks; - buffer += blocks * lunp->info.blk_size; - } - - ret = HAL_SUCCESS; - -exit: - osalMutexUnlock(&lunp->msdp->mtx); - osalSysLock(); - if (lunp->state == BLK_READING) { - lunp->state = BLK_READY; - } else { - osalDbgCheck(lunp->state == BLK_STOP); - uwarn("MSD: State = BLK_STOP"); - } - osalSysUnlock(); - return ret; -} - -bool usbhmsdLUNWrite(USBHMassStorageLUNDriver *lunp, uint32_t startblk, - const uint8_t *buffer, uint32_t n) { - - osalDbgCheck(lunp != NULL); - bool ret = HAL_FAILED; - uint16_t blocks; - msd_result_t res; - - osalSysLock(); - if (lunp->state != BLK_READY) { - osalSysUnlock(); - return ret; - } - lunp->state = BLK_WRITING; - osalSysUnlock(); - - osalMutexLock(&lunp->msdp->mtx); - while (n) { - if (n > 0xffff) { - blocks = 0xffff; - } else { - blocks = (uint16_t)n; - } - res = scsi_write10(lunp, startblk, blocks, buffer); - if (res.tres != MSD_TRANSACTIONRESULT_OK) { - uerr("\tWRITE (10): Transaction error"); - goto exit; - } else if (res.cres == MSD_COMMANDRESULT_FAILED) { - //TODO: request sense, and act appropriately - uerr("\tWRITE (10): Command Failed"); - _requestsense(lunp); - goto exit; - } else if (res.cres == MSD_COMMANDRESULT_PHASE_ERROR) { - //TODO: Do reset, etc. - uerr("\tWRITE (10): Command Phase Error"); - goto exit; - } - n -= blocks; - startblk += blocks; - buffer += blocks * lunp->info.blk_size; - } - - ret = HAL_SUCCESS; - -exit: - osalMutexUnlock(&lunp->msdp->mtx); - osalSysLock(); - if (lunp->state == BLK_WRITING) { - lunp->state = BLK_READY; - } else { - osalDbgCheck(lunp->state == BLK_STOP); - uwarn("MSD: State = BLK_STOP"); - } - osalSysUnlock(); - return ret; -} - -bool usbhmsdLUNSync(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - (void)lunp; - //TODO: Do SCSI Sync - return HAL_SUCCESS; -} - -bool usbhmsdLUNGetInfo(USBHMassStorageLUNDriver *lunp, BlockDeviceInfo *bdip) { - osalDbgCheck(lunp != NULL); - osalDbgCheck(bdip != NULL); - *bdip = lunp->info; - return HAL_SUCCESS; -} - -bool usbhmsdLUNIsInserted(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - blkstate_t state; - osalSysLock(); - state = lunp->state; - osalSysUnlock(); - return (state >= BLK_ACTIVE); -} - -bool usbhmsdLUNIsProtected(USBHMassStorageLUNDriver *lunp) { - osalDbgCheck(lunp != NULL); - return FALSE; -} - -void usbhmsdObjectInit(USBHMassStorageDriver *msdp) { - osalDbgCheck(msdp != NULL); - memset(msdp, 0, sizeof(*msdp)); - msdp->info = &usbhmsdClassDriverInfo; - osalMutexObjectInit(&msdp->mtx); -} - -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_uvc.c b/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_uvc.c deleted file mode 100644 index 09a0f1d..0000000 --- a/ChibiOS_16.1.5/community/os/hal/src/usbh/hal_usbh_uvc.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" -#include "hal_usbh.h" - -#if HAL_USBH_USE_UVC - -#if !HAL_USE_USBH -#error "USBHUVC needs HAL_USE_USBH" -#endif - -#if !HAL_USBH_USE_IAD -#error "USBHUVC needs HAL_USBH_USE_IAD" -#endif - -#if USBHUVC_DEBUG_ENABLE_TRACE -#define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define udbgf(f, ...) do {} while(0) -#define udbg(f, ...) do {} while(0) -#endif - -#if USBHUVC_DEBUG_ENABLE_INFO -#define uinfof(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uinfo(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uinfof(f, ...) do {} while(0) -#define uinfo(f, ...) do {} while(0) -#endif - -#if USBHUVC_DEBUG_ENABLE_WARNINGS -#define uwarnf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uwarn(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uwarnf(f, ...) do {} while(0) -#define uwarn(f, ...) do {} while(0) -#endif - -#if USBHUVC_DEBUG_ENABLE_ERRORS -#define uerrf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) -#define uerr(f, ...) usbDbgPuts(f, ##__VA_ARGS__) -#else -#define uerrf(f, ...) do {} while(0) -#define uerr(f, ...) do {} while(0) -#endif - - -static usbh_baseclassdriver_t *uvc_load(usbh_device_t *dev, - const uint8_t *descriptor, uint16_t rem); -static void uvc_unload(usbh_baseclassdriver_t *drv); - -static const usbh_classdriver_vmt_t class_driver_vmt = { - uvc_load, - uvc_unload -}; -const usbh_classdriverinfo_t usbhuvcClassDriverInfo = { - 0x0e, 0x03, 0x00, "UVC", &class_driver_vmt -}; - - -static usbh_baseclassdriver_t *uvc_load(usbh_device_t *dev, const uint8_t *descriptor, uint16_t rem) { - (void)dev; - (void)descriptor; - (void)rem; - return NULL; -} - -static void uvc_unload(usbh_baseclassdriver_t *drv) { - (void)drv; -} - -#endif - diff --git a/ChibiOS_16.1.5/community/os/various/bitmap.c b/ChibiOS_16.1.5/community/os/various/bitmap.c deleted file mode 100644 index a17dfcb..0000000 --- a/ChibiOS_16.1.5/community/os/various/bitmap.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2015 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file bitmap.c - * @brief Bit map code. - * - * @addtogroup bitmap - * @{ - */ - -#include "string.h" /* for memset() */ - -#include "hal.h" -#include "bitmap.h" - -/*===========================================================================*/ -/* Module local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module local functions. */ -/*===========================================================================*/ - -/** - * @brief Get word number. - * - * @param[in] bit number of the bit - * - * @return Index of the word containing specified bit. - */ -static inline size_t word(size_t bit) { - return bit / (sizeof(bitmap_word_t) * 8); -} - -/** - * @brief Get bit position in word. - * - * @param[in] bit number of the bit - * - * @return Position of the specified bit related to word start. - */ -static inline size_t pos_in_word(size_t bit) { - return bit % (sizeof(bitmap_word_t) * 8); -} - -/*===========================================================================*/ -/* Module exported functions. */ -/*===========================================================================*/ -/** - * @brief Initializes an @p bitmap_t structure. - * - * @param[out] map the @p bitmap_t structure to be initialized - * @param[in] val the value to be written in all bitmap - */ -void bitmapObjectInit(bitmap_t *map, bitmap_word_t val) { - uint8_t pattern; - - osalDbgCheck(val == 1 || val == 0); - - if (val == 1) - pattern = 0xFF; - else - pattern = 0; - - memset(map->array, pattern, map->len*sizeof(bitmap_word_t)); -} - -/** - * @brief Set single bit in an @p bitmap_t structure. - * - * @param[out] map the @p bitmap_t structure - * @param[in] bit number of the bit to be set - */ -void bitmapSet(bitmap_t *map, size_t bit) { - size_t w = word(bit); - - osalDbgCheck(w < map->len); - map->array[w] |= (bitmap_word_t)1 << pos_in_word(bit); -} - -/** - * @brief Clear single bit in an @p bitmap_t structure. - * - * @param[out] map the @p bitmap_t structure - * @param[in] bit number of the bit to be cleared - */ -void bitmapClear(bitmap_t *map, size_t bit) { - size_t w = word(bit); - - osalDbgCheck(w < map->len); - map->array[w] &= ~((bitmap_word_t)1 << pos_in_word(bit)); -} - -/** - * @brief Invert single bit in an @p bitmap_t structure. - * - * @param[out] map the @p bitmap_t structure - * @param[in] bit number of the bit to be inverted - */ -void bitmapInvert(bitmap_t *map, size_t bit) { - size_t w = word(bit); - - osalDbgCheck(w < map->len); - map->array[w] ^= (bitmap_word_t)1 << pos_in_word(bit); -} - -/** - * @brief Get bit value from an @p bitmap_t structure. - * - * @param[in] map the @p bitmap_t structure - * @param[in] bit number of the requested bit - * - * @return Requested bit value. - */ -bitmap_word_t bitmapGet(const bitmap_t *map, size_t bit) { - size_t w = word(bit); - - osalDbgCheck(w < map->len); - return (map->array[w] >> pos_in_word(bit)) & 1; -} - -/** - * @brief Get total amount of bits in an @p bitmap_t structure. - * - * @param[in] map the @p bitmap_t structure - * - * @return Bit number. - */ -size_t bitmapGetBitsCount(const bitmap_t *map) { - return map->len * sizeof(bitmap_word_t) * 8; -} -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/bitmap.h b/ChibiOS_16.1.5/community/os/various/bitmap.h deleted file mode 100644 index d7831aa..0000000 --- a/ChibiOS_16.1.5/community/os/various/bitmap.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - ChibiOS/HAL - Copyright (C) 2015 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file bitmap.h - * @brief Bit map structures and macros. - * - * @addtogroup bitmap - * @{ - */ - -#ifndef _BITMAP_H_ -#define _BITMAP_H_ - -/*===========================================================================*/ -/* Module constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Module data structures and types. */ -/*===========================================================================*/ - -typedef unsigned int bitmap_word_t; - -/** - * @brief Type of a event timer structure. - */ -typedef struct { - bitmap_word_t *array; - size_t len; /* Array length in _words_ NOT bytes */ -} bitmap_t; - -/*===========================================================================*/ -/* Module macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void bitmapObjectInit(bitmap_t *map, bitmap_word_t val); - void bitmapSet(bitmap_t *map, size_t bit); - void bitmapClear(bitmap_t *map, size_t bit); - void bitmapInvert(bitmap_t *map, size_t bit); - bitmap_word_t bitmapGet(const bitmap_t *map, size_t bit); - size_t bitmapGetBitsCount(const bitmap_t *map); -#ifdef __cplusplus -} -#endif - -#endif /* _BITMAP_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/bswap.h b/ChibiOS_16.1.5/community/os/various/bswap.h deleted file mode 100644 index 6448498..0000000 --- a/ChibiOS_16.1.5/community/os/various/bswap.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef BSWAP_H -#define BSWAP_H - -#if defined(__cplusplus) -extern "C" { -#endif - -#if !(defined(ARCH_BIG_ENDIAN) || defined(ARCH_LITTLE_ENDIAN)) -#error "Need to define one: ARCH_BIG_ENDIAN or ARCH_LITTLE_ENDIAN" -#endif - -#if defined(ARCH_BIG_ENDIAN) && defined(ARCH_LITTLE_ENDIAN) -#error "ARCH_BIG_ENDIAN and ARCH_LITTLE_ENDIAN are both set" -#endif - - -#define BSWAP_16(x) \ - (uint16_t)((((x) & 0xFF00) >> 8) | \ - (((x) & 0x00FF) << 8)) -#define BSWAP_32(x) \ - (uint32_t)((((x) & 0xFF000000UL) >> 24UL) | \ - (((x) & 0x00FF0000UL) >> 8UL) | \ - (((x) & 0x0000FF00UL) << 8UL) | \ - (((x) & 0x000000FFUL) << 24UL)) -#define BSWAP_64(x) \ - (uint64_t)((((x) & 0xFF00000000000000UL) >> 56UL) | \ - (((x) & 0x00FF000000000000UL) >> 40UL) | \ - (((x) & 0x0000FF0000000000UL) >> 24UL) | \ - (((x) & 0x000000FF00000000UL) >> 8UL) | \ - (((x) & 0x00000000FF000000UL) << 8UL) | \ - (((x) & 0x0000000000FF0000UL) << 24UL) | \ - (((x) & 0x000000000000FF00UL) << 40UL) | \ - (((x) & 0x00000000000000FFUL) << 56UL)) - - -#if defined(ARCH_BIG_ENDIAN) -#define le16_to_cpu(x) bswap_16(x) -#define le32_to_cpu(x) bswap_32(x) -#define le64_to_cpu(x) bswap_64(x) -#define be16_to_cpu(x) (x) -#define be32_to_cpu(x) (x) -#define be64_to_cpu(x) (x) -#define cpu_to_le16(x) bswap_16(x) -#define cpu_to_le32(x) bswap_32(x) -#define cpu_to_le64(x) bswap_64(x) -#define cpu_to_be16(x) (x) -#define cpu_to_be32(x) (x) -#define cpu_to_be64(x) (x) -#define LE16_TO_CPU(x) BSWAP_16(x) -#define LE32_TO_CPU(x) BSWAP_32(x) -#define LE64_TO_CPU(x) BSWAP_64(x) -#define BE16_TO_CPU(x) (x) -#define BE32_TO_CPU(x) (x) -#define BE64_TO_CPU(x) (x) -#define CPU_TO_LE16(x) BSWAP_16(x) -#define CPU_TO_LE32(x) BSWAP_32(x) -#define CPU_TO_LE64(x) BSWAP_64(x) -#define CPU_TO_BE16(x) (x) -#define CPU_TO_BE32(x) (x) -#define CPU_TO_BE64(x) (x) -#endif - - -#if defined(ARCH_LITTLE_ENDIAN) -#define le16_to_cpu(x) (x) -#define le32_to_cpu(x) (x) -#define le64_to_cpu(x) (x) -#define be16_to_cpu(x) bswap_16(x) -#define be32_to_cpu(x) bswap_32(x) -#define be64_to_cpu(x) bswap_64(x) -#define cpu_to_le16(x) (x) -#define cpu_to_le32(x) (x) -#define cpu_to_le64(x) (x) -#define cpu_to_be16(x) bswap_16(x) -#define cpu_to_be32(x) bswap_32(x) -#define cpu_to_be64(x) bswap_64(x) -#define LE16_TO_CPU(x) (x) -#define LE32_TO_CPU(x) (x) -#define LE64_TO_CPU(x) (x) -#define BE16_TO_CPU(x) BSWAP_16(x) -#define BE32_TO_CPU(x) BSWAP_32(x) -#define BE64_TO_CPU(x) BSWAP_64(x) -#define CPU_TO_LE16(x) (x) -#define CPU_TO_LE32(x) (x) -#define CPU_TO_LE64(x) (x) -#define CPU_TO_BE16(x) BSWAP_16(x) -#define CPU_TO_BE32(x) BSWAP_32(x) -#define CPU_TO_BE64(x) BSWAP_64(x) -#endif - - -static inline uint16_t bswap_16(const uint16_t x) - __attribute__ ((warn_unused_result)) - __attribute__ ((const)) - __attribute__ ((always_inline)); - -static inline uint16_t bswap_16(const uint16_t x) { - if (__builtin_constant_p(x)) - return BSWAP_16(x); - - uint8_t tmp; - union { uint16_t x; uint8_t b[2]; } data; - - data.x = x; - tmp = data.b[0]; - data.b[0] = data.b[1]; - data.b[1] = tmp; - - return data.x; -} - -static inline uint32_t bswap_32(const uint32_t x) - __attribute__ ((warn_unused_result)) - __attribute__ ((const)) - __attribute__ ((always_inline)); - - -static inline uint32_t bswap_32(const uint32_t x) { - if (__builtin_constant_p(x)) - return BSWAP_32(x); - - uint8_t tmp; - union { uint32_t x; uint8_t b[4]; } data; - - data.x = x; - tmp = data.b[0]; - data.b[0] = data.b[3]; - data.b[3] = tmp; - tmp = data.b[1]; - data.b[1] = data.b[2]; - data.b[2] = tmp; - - return data.x; -} - -static inline uint64_t bswap_64(const uint64_t x) - __attribute__ ((warn_unused_result)) - __attribute__ ((const)) - __attribute__ ((always_inline)); - - -static inline uint64_t bswap_64(const uint64_t x) { - if (__builtin_constant_p(x)) - return BSWAP_64(x); - - uint8_t tmp; - union { uint64_t x; uint8_t b[8]; } data; - - data.x = x; - tmp = data.b[0]; - data.b[0] = data.b[7]; - data.b[7] = tmp; - tmp = data.b[1]; - data.b[1] = data.b[6]; - data.b[6] = tmp; - tmp = data.b[2]; - data.b[2] = data.b[5]; - data.b[5] = tmp; - tmp = data.b[3]; - data.b[3] = data.b[4]; - data.b[4] = tmp; - - return data.x; -} - -static inline void bswap_n(void* const data, uint8_t len) - __attribute__ ((nonnull (1))); - -static inline void bswap_n(void* const data, uint8_t len) { - uint8_t* ptr = (uint8_t*)data; - - for ( ; len > 1 ; ptr++, len -= 2 ) { - uint8_t tmp = *ptr; - *ptr = *(ptr + len - 1); - *(ptr + len - 1) = tmp; - } -} - -#if defined(__cplusplus) -} -#endif - -#endif - - diff --git a/ChibiOS_16.1.5/community/os/various/crcsw.c b/ChibiOS_16.1.5/community/os/various/crcsw.c deleted file mode 100644 index 02a64f3..0000000 --- a/ChibiOS_16.1.5/community/os/various/crcsw.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file crcsw.c - * @brief CRC software driver. - @note SW implementation was based from: - * @note http://www.barrgroup.com/Embedded-Systems/How-To/CRC-Calculation-C-Code - * - * @addtogroup CRC - * @{ - */ - -#include "hal.h" - -#if HAL_USE_CRC || defined(__DOXYGEN__) - -#if CRCSW_USE_CRC1 || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * @brief CRC default configuration. - */ - -#if CRCSW_CRC32_TABLE == TRUE || defined(__DOXYGEN__) -static const uint32_t crc32_table[256] = { - 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, - 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, - 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, - 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, - 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, - 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, - 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, - 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, - 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, - 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, - 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, - 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, - 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, - 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, - 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, - 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, - 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, - 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, - 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, - 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, - 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, - 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, - 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, - 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, - 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, - 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, - 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, - 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, - 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, - 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, - 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, - 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, - 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, - 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, - 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, - 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, - 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, - 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, - 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, - 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, - 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, - 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, - 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, - 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, - 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, - 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, - 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, - 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, - 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, - 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, - 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, - 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, - 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, - 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, - 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, - 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, - 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, - 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, - 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, - 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, - 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, - 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, - 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, - 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d -}; -#endif - -#if CRCSW_CRC16_TABLE || defined(__DOXYGEN__) -static const uint32_t crc16_table[256] = { - 0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241, - 0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440, - 0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40, - 0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841, - 0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40, - 0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41, - 0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641, - 0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040, - 0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240, - 0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441, - 0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41, - 0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840, - 0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41, - 0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40, - 0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640, - 0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041, - 0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240, - 0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441, - 0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41, - 0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840, - 0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41, - 0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40, - 0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640, - 0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041, - 0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241, - 0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440, - 0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40, - 0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841, - 0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40, - 0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41, - 0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641, - 0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040 -}; -#endif - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief CRC1 driver identifier.*/ -#if CRCSW_USE_CRC1 || defined(__DOXYGEN__) -CRCDriver CRCD1; -#endif - -#if CRCSW_CRC32_TABLE || defined(__DOXYGEN__) -const CRCConfig crcsw_crc32_config = { - .poly_size = 32, - .poly = 0x04C11DB7, - .initial_val = 0xFFFFFFFF, - .final_val = 0xFFFFFFFF, - .reflect_data = 1, - .reflect_remainder = 1, - .table = crc32_table -}; -#endif - -#if CRCSW_CRC16_TABLE || defined(__DOXYGEN__) -const CRCConfig crcsw_crc16_config = { - .poly_size = 16, - .poly = 0x8005, - .initial_val = 0x0, - .final_val = 0x0, - .reflect_data = 1, - .reflect_remainder = 1, - .table = crc16_table -}; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -#if (CRCSW_PROGRAMMABLE == TRUE) -static uint32_t reflect(uint32_t data, uint8_t nBits) { - uint32_t reflection = 0x00000000; - uint8_t bit; - - /* Reflect the data about the center bit. */ - for (bit = 0; bit < nBits; ++bit) { - /* If the LSB bit is set, set the reflection of it. */ - if (data & 0x01) { - reflection |= (1 << ((nBits - 1) - bit)); - } - - data = (data >> 1); - } - - return reflection; -} -#endif - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level CRC software initialization. - * - * @notapi - */ -void crc_lld_init(void) { - crcObjectInit(&CRCD1); - CRCD1.crc = CRCD1.config->initial_val; -} - -/** - * @brief Configures and activates the CRC peripheral. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -void crc_lld_start(CRCDriver *crcp) { - osalDbgAssert(crcp->config != NULL, "config must not be NULL"); - -#if CRCSW_PROGRAMMABLE == FALSE -#if CRCSW_CRC32_TABLE == TRUE && CRCSW_CRC16_TABLE == TRUE - osalDbgAssert((crcp->config == CRCSW_CRC32_TABLE_CONFIG) || - (crcp->config == CRCSW_CRC16_TABLE_CONFIG), "config must be CRCSW_CRC32_TABLE_CONFIG or CRCSW_CRC16_TABLE_CONFIG"); -#elif CRCSW_CRC32_TABLE == TRUE && CRCSW_CRC16_TABLE == FALSE - osalDbgAssert(crcp->config == CRCSW_CRC32_TABLE_CONFIG, - "config must be CRCSW_CRC32_TABLE_CONFIG"); -#else - osalDbgAssert(crcp->config == CRCSW_CRC16_TABLE_CONFIG, - "config must be CRCSW_CRC16_TABLE_CONFIG"); -#endif -#endif - crc_lld_reset(crcp); -} - - -/** - * @brief Deactivates the CRC peripheral. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -void crc_lld_stop(CRCDriver *crcp) { - (void)crcp; -} - -/** - * @brief Resets current CRC calculation. - * - * @param[in] crcp pointer to the @p CRCDriver object - * - * @notapi - */ -void crc_lld_reset(CRCDriver *crcp) { - crcp->crc = crcp->config->initial_val; -} - -/** - * @brief Returns calculated CRC from last reset - * - * @param[in] crcp pointer to the @p CRCDriver object - * @param[in] n size of buf in bytes - * @param[in] buf @p buffer location - * - * @notapi - */ -uint32_t crc_lld_calc(CRCDriver *crcp, size_t n, const void *buf) { - uint32_t i; - uint32_t crc; -#if (CRCSW_CRC32_TABLE == TRUE) || (CRCSW_CRC16_TABLE == TRUE) - if (crcp->config->table != NULL) { - for (i = 0; i < n; i++) { - uint8_t data = *((uint8_t*)buf + i); - uint8_t idx = (crcp->crc ^ data); - crcp->crc = (crcp->config->table[idx] ^ (crcp->crc >> 8)); - } - crc = crcp->crc; - } -#endif - -#if (CRCSW_PROGRAMMABLE == TRUE) - // Mask off bits to poly size - uint32_t mask = 1 << (crcp->config->poly_size - 1); - mask |= (mask - 1); - - crc = crcp->crc; - if (crcp->config->table == NULL) { - for (i = 0; i < n; i++) { - uint8_t data = *((uint8_t*)buf + i); - uint8_t bit; - - if (crcp->config->reflect_data) { - data = reflect(data, 8); - } - - /* Bring the next byte into the remainder. */ - crc ^= (data << (crcp->config->poly_size - 8)); - - /* Perform modulo-2 division, a bit at a time. */ - for (bit = 8; bit > 0; --bit) { - /* Try to divide the current data bit. */ - if (crc & (1 << (crcp->config->poly_size - 1))) { - crc = (crc << 1) ^ crcp->config->poly; - } else { - crc <<= 1; - } - } - } - - crcp->crc = crc; - - if (crcp->config->reflect_remainder) { - crc = reflect(crc, crcp->config->poly_size); - } - } -#endif - - return (crc ^ crcp->config->final_val) & mask; -} - -#endif /* CRCSW_USE_CRC1 */ - -#endif /* HAL_USE_CRC */ diff --git a/ChibiOS_16.1.5/community/os/various/crcsw.h b/ChibiOS_16.1.5/community/os/various/crcsw.h deleted file mode 100644 index 4483a34..0000000 --- a/ChibiOS_16.1.5/community/os/various/crcsw.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file crcsw.h - * @brief CRC software driver. - * - * @addtogroup CRC - * @{ - */ - -#include "hal.h" - -#if HAL_USE_CRC || defined(__DOXYGEN__) - -#if CRCSW_USE_CRC1 || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief CRC1 software driver enable switch. - * @details If set to @p TRUE the support for CRC1 is included. - * @note The default is @p FALSE - */ -#if !defined(CRCSW_USE_CRC1) || defined(__DOXYGEN__) -#define CRCSW_USE_CRC1 FALSE -#endif - -/** - * @brief Enables software CRC32 - */ -#if !defined(CRCSW_CRC32_TABLE) || defined(__DOXYGEN__) -#define CRCSW_CRC32_TABLE FALSE -#endif - -/** - * @brief Enables software CRC16 - */ -#if !defined(CRCSW_CRC16_TABLE) || defined(__DOXYGEN__) -#define CRCSW_CRC16_TABLE FALSE -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if CRCSW_USE_CRC1 && CRC_USE_DMA -#error "Software CRC does not support DMA(CRC_USE_DMA)" -#endif - -#if CRCSW_CRC32_TABLE == FALSE && CRCSW_CRC16_TABLE == FALSE && \ - CRCSW_PROGRAMMABLE == FALSE -#error "At least one of CRCSW_PROGRAMMABLE, CRCSW_CRC32_TABLE, or CRCSW_CRC16_TABLE must be defined" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ -/** - * @brief Type of a structure representing an CRC driver. - */ -typedef struct CRCDriver CRCDriver; - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /** - * @brief The size of polynomial to be used for CRC. - */ - uint32_t poly_size; - /** - * @brief The coefficients of the polynomial to be used for CRC. - */ - uint32_t poly; - /** - * @brief The inital value - */ - uint32_t initial_val; - /** - * @brief The final XOR value - */ - uint32_t final_val; - /** - * @brief Reflect bit order data going into CRC - */ - bool reflect_data; - /** - * @brief Reflect bit order of final remainder - */ - bool reflect_remainder; - /* End of the mandatory fields.*/ - /** - * @brief The crc lookup table to use when calculating CRC. - */ - const uint32_t *table; -} CRCConfig; - - -/** - * @brief Structure representing an CRC driver. - */ -struct CRCDriver { - /** - * @brief Driver state. - */ - crcstate_t state; - /** - * @brief Current configuration data. - */ - const CRCConfig *config; -#if CRC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif /* CRC_USE_MUTUAL_EXCLUSION */ - /* End of the mandatory fields.*/ - /** - * @brief Current value of calculated CRC. - */ - uint32_t crc; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ -#if CRCSW_CRC32_TABLE || defined(__DOXYGEN__) -/** - * @brief Configuration that represents CRC32 - */ -#define CRCSW_CRC32_TABLE_CONFIG (&crcsw_crc32_config) -#endif - -#if CRCSW_CRC16_TABLE || defined(__DOXYGEN__) -/** - * @brief Configuration that represents CRC16 - */ -#define CRCSW_CRC16_TABLE_CONFIG (&crcsw_crc16_config) -#endif - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern CRCDriver CRCD1; - -#if CRCSW_CRC32_TABLE -extern const CRCConfig crcsw_crc32_config; -#endif - -#if CRCSW_CRC16_TABLE -extern const CRCConfig crcsw_crc16_config; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void crc_lld_init(void); - void crc_lld_start(CRCDriver *crcp); - void crc_lld_stop(CRCDriver *crcp); - void crc_lld_reset(CRCDriver *crcp); - uint32_t crc_lld_calc(CRCDriver *crcp, size_t n, const void *buf); -#ifdef __cplusplus -} -#endif - -#endif /* CRCSW_USE_CRC1 */ - -#endif /* HAL_USE_CRC */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.c b/ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.c deleted file mode 100644 index 979e502..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file ili9341.c - * @brief ILI9341 TFT LCD diaplay controller driver. - * @note Does not support multiple calling threads natively. - */ - -#include "ch.h" -#include "hal.h" -#include "ili9341.h" - -/** - * @addtogroup ili9341 - * @{ - */ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if !ILI9341_USE_CHECKS && !defined(__DOXYGEN__) -/* Disable checks as needed.*/ - -#ifdef osalDbgCheck -#undef osalDbgCheck -#endif -#define osalDbgCheck(c, func) { \ - (void)(c), (void)__QUOTE_THIS(func)"()"; \ -} - -#ifdef osalDbgAssert -#undef osalDbgAssert -#endif -#define osalDbgAssert(c, m, r) { \ - (void)(c); \ -} - -#ifdef osalDbgCheckClassS -#undef osalDbgCheckClassS -#endif -#define osalDbgCheckClassS() {} - -#ifdef osalDbgCheckClassS -#undef osalDbgCheckClassS -#endif -#define osalDbgCheckClassI() {} - -#endif /* ILI9341_USE_CHECKS */ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief ILI9341D1 driver identifier.*/ -ILI9341Driver ILI9341D1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Initializes the standard part of a @p ILI9341Driver structure. - * - * @param[out] driverp pointer to the @p ILI9341Driver object - * - * @init - */ -void ili9341ObjectInit(ILI9341Driver *driverp) { - - osalDbgCheck(driverp != NULL); - - driverp->state = ILI9341_STOP; - driverp->config = NULL; -#if (TRUE == ILI9341_USE_MUTUAL_EXCLUSION) -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxObjectInit(&driverp->lock); -#else - chSemObjectInit(&driverp->lock, 1); -#endif -#endif /* (TRUE == ILI9341_USE_MUTUAL_EXCLUSION) */ -} - -/** - * @brief Configures and activates the ILI9341 peripheral. - * @pre ILI9341 is stopped. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * @param[in] configp pointer to the @p ILI9341Config object - * - * @api - */ -void ili9341Start(ILI9341Driver *driverp, const ILI9341Config *configp) { - - chSysLock(); - osalDbgCheck(driverp != NULL); - osalDbgCheck(configp != NULL); - osalDbgCheck(configp->spi != NULL); - osalDbgAssert(driverp->state == ILI9341_STOP, "invalid state"); - - spiSelectI(configp->spi); - spiUnselectI(configp->spi); - driverp->config = configp; - driverp->state = ILI9341_READY; - chSysUnlock(); -} - -/** - * @brief Deactivates the ILI9341 peripheral. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @api - */ -void ili9341Stop(ILI9341Driver *driverp) { - - chSysLock(); - osalDbgCheck(driverp != NULL); - osalDbgAssert(driverp->state == ILI9341_READY, "invalid state"); - - driverp->state = ILI9341_STOP; - chSysUnlock(); -} - -#if ILI9341_USE_MUTUAL_EXCLUSION - -/** - * @brief Gains exclusive access to the ILI9341 module. - * @details This function tries to gain ownership to the ILI9341 module, if the - * module is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p ILI9341_USE_MUTUAL_EXCLUSION must be enabled. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @sclass - */ -void ili9341AcquireBusS(ILI9341Driver *driverp) { - - osalDbgCheckClassS(); - osalDbgCheck(driverp == &ILI9341D1); - osalDbgAssert(driverp->state == ILI9341_READY, "not ready"); - -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxLockS(&driverp->lock); -#else - chSemWaitS(&driverp->lock); -#endif -} - -/** - * @brief Gains exclusive access to the ILI9341 module. - * @details This function tries to gain ownership to the ILI9341 module, if the - * module is already being used then the invoking thread is queued. - * @pre In order to use this function the option - * @p ILI9341_USE_MUTUAL_EXCLUSION must be enabled. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @api - */ -void ili9341AcquireBus(ILI9341Driver *driverp) { - - chSysLock(); - ili9341AcquireBusS(driverp); - chSysUnlock(); -} - -/** - * @brief Releases exclusive access to the ILI9341 module. - * @pre In order to use this function the option - * @p ILI9341_USE_MUTUAL_EXCLUSION must be enabled. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @sclass - */ -void ili9341ReleaseBusS(ILI9341Driver *driverp) { - - osalDbgCheckClassS(); - osalDbgCheck(driverp == &ILI9341D1); - osalDbgAssert(driverp->state == ILI9341_READY, "not ready"); - -#if (TRUE == CH_CFG_USE_MUTEXES) - chMtxUnlockS(&driverp->lock); -#else - chSemSignalI(&driverp->lock); -#endif -} - -/** - * @brief Releases exclusive access to the ILI9341 module. - * @pre In order to use this function the option - * @p ILI9341_USE_MUTUAL_EXCLUSION must be enabled. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @api - */ -void ili9341ReleaseBus(ILI9341Driver *driverp) { - - chSysLock(); - ili9341ReleaseBusS(driverp); - chSysUnlock(); -} - -#endif /* ILI9341_USE_MUTUAL_EXCLUSION */ - -#if ILI9341_IM == ILI9341_IM_4LSI_1 /* 4-wire, half-duplex */ - -/** - * @brief Asserts the slave select signal and prepares for transfers. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @iclass - */ -void ili9341SelectI(ILI9341Driver *driverp) { - - osalDbgCheckClassI(); - osalDbgCheck(driverp != NULL); - osalDbgAssert(driverp->state == ILI9341_READY, "invalid state"); - - driverp->state = ILI9341_ACTIVE; - spiSelectI(driverp->config->spi); -} - -/** - * @brief Asserts the slave select signal and prepares for transfers. - * @pre ILI9341 is ready. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @api - */ -void ili9341Select(ILI9341Driver *driverp) { - - chSysLock(); - ili9341SelectI(driverp); - chSysUnlock(); -} - -/** - * @brief Deasserts the slave select signal. - * @details The previously selected peripheral is unselected. - * @pre ILI9341 is active. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @iclass - */ -void ili9341UnselectI(ILI9341Driver *driverp) { - - osalDbgCheckClassI(); - osalDbgCheck(driverp != NULL); - osalDbgAssert(driverp->state == ILI9341_ACTIVE, "invalid state"); - - spiUnselectI(driverp->config->spi); - driverp->state = ILI9341_READY; -} - -/** - * @brief Deasserts the slave select signal. - * @details The previously selected peripheral is unselected. - * @pre ILI9341 is active. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @iclass - */ -void ili9341Unselect(ILI9341Driver *driverp) { - - chSysLock(); - ili9341UnselectI(driverp); - chSysUnlock(); -} - -/** - * @brief Write command byte. - * @details Sends a command byte via SPI. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * @param[in] cmd command byte - * - * @api - */ -void ili9341WriteCommand(ILI9341Driver *driverp, uint8_t cmd) { - - osalDbgCheck(driverp != NULL); - osalDbgAssert(driverp->state == ILI9341_ACTIVE, "invalid state"); - - driverp->value = cmd; - palClearPad(driverp->config->dcx_port, driverp->config->dcx_pad); /* !Cmd */ - spiSend(driverp->config->spi, 1, &driverp->value); -} - -/** - * @brief Write data byte. - * @details Sends a data byte via SPI. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * @param[in] value data byte - * - * @api - */ -void ili9341WriteByte(ILI9341Driver *driverp, uint8_t value) { - - osalDbgCheck(driverp != NULL); - osalDbgAssert(driverp->state == ILI9341_ACTIVE, "invalid state"); - - driverp->value = value; - palSetPad(driverp->config->dcx_port, driverp->config->dcx_pad); /* Data */ - spiSend(driverp->config->spi, 1, &driverp->value); -} - -/** - * @brief Read data byte. - * @details Receives a data byte via SPI. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * - * @return data byte - * - * @api - */ -uint8_t ili9341ReadByte(ILI9341Driver *driverp) { - - osalDbgAssert(FALSE, "should not be used"); - - osalDbgCheck(driverp != NULL); - osalDbgAssert(driverp->state == ILI9341_ACTIVE, "invalid state"); - - palSetPad(driverp->config->dcx_port, driverp->config->dcx_pad); /* Data */ - spiReceive(driverp->config->spi, 1, &driverp->value); - return driverp->value; -} - -/** - * @brief Write data chunk. - * @details Sends a data chunk via SPI. - * @pre The chunk must be accessed by DMA. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * @param[in] chunk chunk bytes - * @param[in] length chunk length - * - * @api - */ -void ili9341WriteChunk(ILI9341Driver *driverp, const uint8_t chunk[], - size_t length) { - - osalDbgCheck(driverp != NULL); - osalDbgCheck(chunk != NULL); - osalDbgAssert(driverp->state == ILI9341_ACTIVE, "invalid state"); - - if (length != 0) { - palSetPad(driverp->config->dcx_port, driverp->config->dcx_pad); /* Data */ - spiSend(driverp->config->spi, length, chunk); - } -} - -/** - * @brief Read data chunk. - * @details Receives a data chunk via SPI. - * @pre The chunk must be accessed by DMA. - * - * @param[in] driverp pointer to the @p ILI9341Driver object - * @param[out] chunk chunk bytes - * @param[in] length chunk length - * - * @api - */ -void ili9341ReadChunk(ILI9341Driver *driverp, uint8_t chunk[], - size_t length) { - - osalDbgCheck(driverp != NULL); - osalDbgCheck(chunk != NULL); - osalDbgAssert(driverp->state == ILI9341_ACTIVE, "invalid state"); - - if (length != 0) { - palSetPad(driverp->config->dcx_port, driverp->config->dcx_pad); /* Data */ - spiReceive(driverp->config->spi, length, chunk); - } -} - -#else /* ILI9341_IM == * */ -#error "Only the ILI9341_IM_4LSI_1 interface mode is currently supported" -#endif /* ILI9341_IM == * */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.h b/ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.h deleted file mode 100644 index 007c4fd..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/lcd/ili9341.h +++ /dev/null @@ -1,593 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file ili9341.h - * @brief ILI9341 TFT LCD diaplay controller driver. - */ - -#ifndef _ILI9341_H_ -#define _ILI9341_H_ - -/** - * @addtogroup ili9341 - * @{ - */ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name ILI9341 regulative commands - * @{ - */ -#define ILI9341_CMD_NOP (0x00) /**< No operation.*/ -#define ILI9341_CMD_RESET (0x01) /**< Software reset.*/ -#define ILI9341_GET_ID_INFO (0x04) /**< Get ID information.*/ -#define ILI9341_GET_STATUS (0x09) /**< Get status.*/ -#define ILI9341_GET_PWR_MODE (0x0A) /**< Get power mode.*/ -#define ILI9341_GET_MADCTL (0x0B) /**< Get MADCTL.*/ -#define ILI9341_GET_PIX_FMT (0x0C) /**< Get pixel format.*/ -#define ILI9341_GET_IMG_FMT (0x0D) /**< Get image format.*/ -#define ILI9341_GET_SIG_MODE (0x0E) /**< Get signal mode.*/ -#define ILI9341_GET_SELF_DIAG (0x0F) /**< Get self-diagnostics.*/ -#define ILI9341_CMD_SLEEP_ON (0x10) /**< Enter sleep mode.*/ -#define ILI9341_CMD_SLEEP_OFF (0x11) /**< Exist sleep mode.*/ -#define ILI9341_CMD_PARTIAL_ON (0x12) /**< Enter partial mode.*/ -#define ILI9341_CMD_PARTIAL_OFF (0x13) /**< Exit partial mode.*/ -#define ILI9341_CMD_INVERT_ON (0x20) /**< Enter inverted mode.*/ -#define ILI9341_CMD_INVERT_OFF (0x21) /**< Exit inverted mode.*/ -#define ILI9341_SET_GAMMA (0x26) /**< Set gamma params.*/ -#define ILI9341_CMD_DISPLAY_OFF (0x28) /**< Disable display.*/ -#define ILI9341_CMD_DISPLAY_ON (0x29) /**< Enable display.*/ -#define ILI9341_SET_COL_ADDR (0x2A) /**< Set column address.*/ -#define ILI9341_SET_PAGE_ADDR (0x2B) /**< Set page address.*/ -#define ILI9341_SET_MEM (0x2C) /**< Set memory.*/ -#define ILI9341_SET_COLOR (0x2D) /**< Set color.*/ -#define ILI9341_GET_MEM (0x2E) /**< Get memory.*/ -#define ILI9341_SET_PARTIAL_AREA (0x30) /**< Set partial area.*/ -#define ILI9341_SET_VSCROLL (0x33) /**< Set vertical scroll def.*/ -#define ILI9341_CMD_TEARING_ON (0x34) /**< Tearing line enabled.*/ -#define ILI9341_CMD_TEARING_OFF (0x35) /**< Tearing line disabled.*/ -#define ILI9341_SET_MEM_ACS_CTL (0x36) /**< Set mem access ctl.*/ -#define ILI9341_SET_VSCROLL_ADDR (0x37) /**< Set vscroll start addr.*/ -#define ILI9341_CMD_IDLE_OFF (0x38) /**< Exit idle mode.*/ -#define ILI9341_CMD_IDLE_ON (0x39) /**< Enter idle mode.*/ -#define ILI9341_SET_PIX_FMT (0x3A) /**< Set pixel format.*/ -#define ILI9341_SET_MEM_CONT (0x3C) /**< Set memory continue.*/ -#define ILI9341_GET_MEM_CONT (0x3E) /**< Get memory continue.*/ -#define ILI9341_SET_TEAR_SCANLINE (0x44) /**< Set tearing scanline.*/ -#define ILI9341_GET_TEAR_SCANLINE (0x45) /**< Get tearing scanline.*/ -#define ILI9341_SET_BRIGHTNESS (0x51) /**< Set brightness.*/ -#define ILI9341_GET_BRIGHTNESS (0x52) /**< Get brightness.*/ -#define ILI9341_SET_DISPLAY_CTL (0x53) /**< Set display ctl.*/ -#define ILI9341_GET_DISPLAY_CTL (0x54) /**< Get display ctl.*/ -#define ILI9341_SET_CABC (0x55) /**< Set CABC.*/ -#define ILI9341_GET_CABC (0x56) /**< Get CABC.*/ -#define ILI9341_SET_CABC_MIN (0x5E) /**< Set CABC min.*/ -#define ILI9341_GET_CABC_MIN (0x5F) /**< Set CABC max.*/ -#define ILI9341_GET_ID1 (0xDA) /**< Get ID1.*/ -#define ILI9341_GET_ID2 (0xDB) /**< Get ID2.*/ -#define ILI9341_GET_ID3 (0xDC) /**< Get ID3.*/ -/** @} */ - -/** - * @name ILI9341 extended commands - * @{ - */ -#define ILI9341_SET_RGB_IF_SIG_CTL (0xB0) /**< RGB IF signal ctl.*/ -#define ILI9341_SET_FRAME_CTL_NORMAL (0xB1) /**< Set frame ctl (normal).*/ -#define ILI9341_SET_FRAME_CTL_IDLE (0xB2) /**< Set frame ctl (idle).*/ -#define ILI9341_SET_FRAME_CTL_PARTIAL (0xB3) /**< Set frame ctl (partial).*/ -#define ILI9341_SET_INVERSION_CTL (0xB4) /**< Set inversion ctl.*/ -#define ILI9341_SET_BLANKING_PORCH_CTL (0xB5) /**< Set blanking porch ctl.*/ -#define ILI9341_SET_FUNCTION_CTL (0xB6) /**< Set function ctl.*/ -#define ILI9341_SET_ENTRY_MODE (0xB7) /**< Set entry mode.*/ -#define ILI9341_SET_LIGHT_CTL_1 (0xB8) /**< Set backlight ctl 1.*/ -#define ILI9341_SET_LIGHT_CTL_2 (0xB9) /**< Set backlight ctl 2.*/ -#define ILI9341_SET_LIGHT_CTL_3 (0xBA) /**< Set backlight ctl 3.*/ -#define ILI9341_SET_LIGHT_CTL_4 (0xBB) /**< Set backlight ctl 4.*/ -#define ILI9341_SET_LIGHT_CTL_5 (0xBC) /**< Set backlight ctl 5.*/ -#define ILI9341_SET_LIGHT_CTL_7 (0xBE) /**< Set backlight ctl 7.*/ -#define ILI9341_SET_LIGHT_CTL_8 (0xBF) /**< Set backlight ctl 8.*/ -#define ILI9341_SET_POWER_CTL_1 (0xC0) /**< Set power ctl 1.*/ -#define ILI9341_SET_POWER_CTL_2 (0xC1) /**< Set power ctl 2.*/ -#define ILI9341_SET_VCOM_CTL_1 (0xC5) /**< Set VCOM ctl 1.*/ -#define ILI9341_SET_VCOM_CTL_2 (0xC6) /**< Set VCOM ctl 2.*/ -#define ILI9341_SET_NVMEM (0xD0) /**< Set NVMEM data.*/ -#define ILI9341_GET_NVMEM_KEY (0xD1) /**< Get NVMEM protect key.*/ -#define ILI9341_GET_NVMEM_STATUS (0xD2) /**< Get NVMEM status.*/ -#define ILI9341_GET_ID4 (0xD3) /**< Get ID4.*/ -#define ILI9341_SET_PGAMMA (0xE0) /**< Set positive gamma.*/ -#define ILI9341_SET_NGAMMA (0xE1) /**< Set negative gamma.*/ -#define ILI9341_SET_DGAMMA_CTL_1 (0xE2) /**< Set digital gamma ctl 1.*/ -#define ILI9341_SET_DGAMMA_CTL_2 (0xE3) /**< Set digital gamma ctl 2.*/ -#define ILI9341_SET_IF_CTL (0xF6) /**< Set interface control.*/ -/** @} */ - -/** - * @name ILI9341 interface modes - * @{ - */ -#define ILI9341_IM_3LSI_1 (0x5) /**< 3-line serial, mode 1.*/ -#define ILI9341_IM_3LSI_2 (0xD) /**< 3-line serial, mode 2.*/ -#define ILI9341_IM_4LSI_1 (0x6) /**< 4-line serial, mode 1.*/ -#define ILI9341_IM_4LSI_2 (0xE) /**< 4-line serial, mode 2.*/ -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name ILI9341 configuration options - * @{ - */ - -/** - * @brief Enables the @p ili9341AcquireBus() and @p ili9341ReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ILI9341_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ILI9341_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief ILI9341 Interface Mode. - */ -#if !defined(ILI9341_IM) || defined(__DOXYGEN__) -#define ILI9341_IM (ILI9341_IM_4LSI_1) -#endif - -/** - * @brief Enables checks for ILI9341 functions. - * @note Disabling this option saves both code and data space. - * @note Disabling checks by ChibiOS will automatically disable ILI9341 - * checks. - */ -#if !defined(ILI9341_USE_CHECKS) || defined(__DOXYGEN__) -#define ILI9341_USE_CHECKS TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if ((TRUE == ILI9341_USE_MUTUAL_EXCLUSION) && \ - (TRUE != CH_CFG_USE_MUTEXES) && \ - (TRUE != CH_CFG_USE_SEMAPHORES)) -#error "ILI9341_USE_MUTUAL_EXCLUSION requires CH_CFG_USE_MUTEXES and/or CH_CFG_USE_SEMAPHORES" -#endif - -/* TODO: Add the remaining modes.*/ -#if (ILI9341_IM != ILI9341_IM_4LSI_1) -#error "Only ILI9341_IM_4LSI_1 interface mode is supported currently" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/* Complex types forwarding.*/ -typedef struct ILI9341Config ILI9341Config; -typedef enum ili9341state_t ili9341state_t; -typedef struct ILI9341Driver ILI9341Driver; - -/** - * @brief ILI9341 driver configuration. - */ -typedef struct ILI9341Config { - SPIDriver *spi; /**< SPI driver used by ILI9341.*/ -#if (ILI9341_IM == ILI9341_IM_4LSI_1) - ioportid_t dcx_port; /**< D/!C signal port.*/ - uint16_t dcx_pad; /**< D/!C signal pad.*/ -#endif /* ILI9341_IM == * */ /* TODO: Add all modes.*/ -} ILI9341Config; - -/** - * @brief ILI9341 driver state. - */ -typedef enum ili9341state_t { - ILI9341_UNINIT = (0), /**< Not initialized.*/ - ILI9341_STOP = (1), /**< Stopped.*/ - ILI9341_READY = (2), /**< Ready.*/ - ILI9341_ACTIVE = (3), /**< Exchanging data.*/ -} ili9341state_t; - -/** - * @brief ILI9341 driver. - */ -typedef struct ILI9341Driver { - ili9341state_t state; /**< Driver state.*/ - const ILI9341Config *config; /**< Driver configuration.*/ - - /* Multithreading stuff.*/ -#if (TRUE == ILI9341_USE_MUTUAL_EXCLUSION) -#if (TRUE == CH_CFG_USE_MUTEXES) - mutex_t lock; /**< Multithreading lock.*/ -#elif (TRUE == CH_CFG_USE_SEMAPHORES) - semaphore_t lock; /**< Multithreading lock.*/ -#endif -#endif /* (TRUE == ILI9341_USE_MUTUAL_EXCLUSION) */ - - /* Temporary variables.*/ - uint8_t value; /**< Non-stacked value, for SPI with CCM.*/ -} ILI9341Driver; - -/** - * @name ILI9341 command params (little endian) - * @{ - */ -#pragma pack(push, 1) - -typedef union { - struct ILI9341ParamBits_GET_ID_INFO { - uint8_t reserved_; - uint8_t ID1; - uint8_t ID2; - uint8_t ID3; - } bits; - uint8_t bytes[4]; -} ILI9341Params_GET_ID_INFO; - -typedef union { - struct ILI9341ParamBits_GET_STATUS { - unsigned _reserved_1 : 5; /* D[ 4: 0] */ - unsigned tearing_mode : 1; /* D[ 5] */ - unsigned gamma_curve : 3; /* D[ 8: 6] */ - unsigned tearing : 1; /* D[ 9] */ - unsigned display : 1; /* D[10] */ - unsigned all_on : 1; /* D[11] */ - unsigned all_off : 1; /* D[12] */ - unsigned invert : 1; /* D[13] */ - unsigned _reserved_2 : 1; /* D[14] */ - unsigned vscroll : 1; /* D[15] */ - unsigned normal : 1; /* D[16] */ - unsigned sleep : 1; /* D[17] */ - unsigned partial : 1; /* D[18] */ - unsigned idle : 1; /* D[19] */ - unsigned pixel_format : 3; /* D[22:20] */ - unsigned _reserved_3 : 2; /* D[24:23] */ - unsigned hrefr_rtl_nltr : 1; /* D[25] */ - unsigned bgr_nrgb : 1; /* D[26] */ - unsigned vrefr_btt_nttb : 1; /* D[27] */ - unsigned transpose : 1; /* D[28] */ - unsigned coladr_rtl_nltr : 1; /* D[29] */ - unsigned rowadr_btt_nttb : 1; /* D[30] */ - unsigned booster : 1; /* D[31] */ - } bits; - uint8_t bytes[4]; -} ILI9341Params_GET_STATUS; - -typedef union { - struct ILI9341ParamBits_GET_PWR_MODE { - unsigned _reserved_1 : 2; /* D[1:0] */ - unsigned display : 1; /* D[2] */ - unsigned normal : 1; /* D[3] */ - unsigned sleep : 1; /* D[4] */ - unsigned partial : 1; /* D[5] */ - unsigned idle : 1; /* D[6] */ - unsigned booster : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_PWR_MODE; - -typedef union { - struct ILI9341ParamBits_GET_MADCTL { - unsigned _reserved_1 : 2; /* D[1:0] */ - unsigned refr_rtl_nltr : 1; /* D[2] */ - unsigned bgr_nrgb : 1; /* D[3] */ - unsigned refr_btt_nttb : 1; /* D[4] */ - unsigned invert : 1; /* D[5] */ - unsigned rtl_nltr : 1; /* D[6] */ - unsigned btt_nttb : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_MADCTL; - -typedef union { - struct ILI9341ParamBits_GET_PIX_FMT { - unsigned DBI : 3; /* D[2:0] */ - unsigned _reserved_1 : 1; /* D[3] */ - unsigned DPI : 3; /* D[6:4] */ - unsigned RIM : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_PIX_FMT; - -typedef union { - struct ILI9341ParamBits_GET_IMG_FMT { - unsigned gamma_curve : 3; /* D[2:0] */ - unsigned _reserved_1 : 5; /* D[7:3] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_IMG_FMT; - -typedef union { - struct ILI9341ParamBits_GET_SIG_MODE { - unsigned _reserved_1 : 2; /* D[1:0] */ - unsigned data_enable : 1; /* D[2] */ - unsigned pixel_clock : 1; /* D[3] */ - unsigned vsync : 1; /* D[4] */ - unsigned hsync : 1; /* D[5] */ - unsigned tearing_mode : 1; /* D[6] */ - unsigned tearing : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_SIG_MODE; - -typedef union { - struct ILI9341ParamBits_GET_SELF_DIAG { - unsigned _reserved_1 : 6; /* D[5:0] */ - unsigned func_err : 1; /* D[6] */ - unsigned reg_err : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_SELF_DIAG; - -typedef union { - struct ILI9341ParamBits_SET_GAMMA { - uint8_t gamma_curve; /* D[7:0] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_GAMMA; - -typedef union { - struct ILI9341ParamBits_SET_COL_ADDR { - uint8_t SC_15_8; /* D[ 7: 0] */ - uint8_t SC_7_0; /* D[15: 8] */ - uint8_t EC_15_8; /* D[23:16] */ - uint8_t EC_7_0; /* D[31:24] */ - } bits; - uint8_t bytes[4]; -} ILI9341Params_SET_COL_ADDR; - -typedef union { - struct ILI9341ParamBits_SET_PAGE_ADDR { - uint8_t SP_15_8; /* D[ 7: 0] */ - uint8_t SP_7_0; /* D[15: 8] */ - uint8_t EP_15_8; /* D[23:16] */ - uint8_t EP_7_0; /* D[31:24] */ - } bits; - uint8_t bytes[4]; -} ILI9341Params_SET_PAGE_ADDR; - -typedef union { - struct ILI9341ParamBits_SET_PARTIAL_AREA { - uint8_t SR_15_8; /* D[ 7: 0] */ - uint8_t SR_7_0; /* D[15: 8] */ - uint8_t ER_15_8; /* D[23:16] */ - uint8_t ER_7_0; /* D[31:24] */ - } bits; - uint8_t bytes[4]; -} ILI9341Params_SET_PARTIAL_AREA; - -typedef union { - struct ILI9341ParamBits_SET_VSCROLL { - uint8_t TFA_15_8; /* D[ 7: 0] */ - uint8_t TFA_7_0; /* D[15: 8] */ - uint8_t VSA_15_8; /* D[23:16] */ - uint8_t VSA_7_0; /* D[31:24] */ - uint8_t BFA_15_8; /* D[39:32] */ - uint8_t BFA_7_0; /* D[47:40] */ - } bits; - uint8_t bytes[6]; -} ILI9341Params_SET_VSCROLL; - -typedef union { - struct ILI9341ParamBits_CMD_TEARING_ON { - unsigned M : 1; /* D[0] */ - unsigned _reserved_1 : 7; /* D[7:1] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_CMD_TEARING_ON; - -typedef union { - struct ILI9341ParamBits_SET_MEM_ACS_CTL { - unsigned _reserved_1 : 2; /* D[1:0] */ - unsigned MH : 1; /* D[2] */ - unsigned BGR : 1; /* D[3] */ - unsigned ML : 1; /* D[4] */ - unsigned MV : 1; /* D[5] */ - unsigned MX : 1; /* D[6] */ - unsigned MY : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_MEM_ACS_CTL; - -typedef union { - struct ILI9341ParamBits_SET_VSCROLL_ADDR { - uint8_t VSP_15_8; /* D[ 7: 0] */ - uint8_t VSP_7_0; /* D[15: 8] */ - } bits; - uint8_t bytes[2]; -} ILI9341Params_SET_VSCROLL_ADDR; - -typedef union { - struct ILI9341ParamBits_SET_PIX_FMT { - unsigned DBI : 3; /* D[2:0] */ - unsigned _reserved_1 : 1; /* D[3] */ - unsigned DPI : 3; /* D[4:6] */ - unsigned _reserved_2 : 1; /* D[7] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_PIX_FMT; - -typedef union { - struct ILI9341ParamBits_SET_TEAR_SCANLINE { - uint8_t STS_8; /* D[ 7: 0] */ - uint8_t STS_7_0; /* D[15: 8] */ - } bits; - uint8_t bytes[4]; -} ILI9341Params_SET_TEAR_SCANLINE; - -typedef union { - struct ILI9341ParamBits_GET_TEAR_SCANLINE { - uint8_t GTS_9_8; /* D[ 7: 0] */ - uint8_t GTS_7_0; /* D[15: 8] */ - } bits; - uint8_t bytes[2]; -} ILI9341Params_GET_TEAR_SCANLINE; - -typedef union { - struct ILI9341ParamBits_SET_BRIGHTNESS { - uint8_t DBV; /* D[7:0] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_BRIGHTNESS; - -typedef union { - struct ILI9341ParamBits_GET_BRIGHTNESS { - uint8_t DBV; /* D[7:0] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_BRIGHTNESS; - -typedef union { - struct ILI9341ParamBits_SET_DISPLAY_CTL { - unsigned _reserved_1 : 2; /* D[1:0] */ - unsigned BL : 1; /* D[2] */ - unsigned DD : 1; /* D[3] */ - unsigned _reserved_2 : 1; /* D[4] */ - unsigned BCTRL : 1; /* D[5] */ - unsigned _reserved_3 : 1; /* D[7:6] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_DISPLAY_CTL; - -typedef union { - struct ILI9341ParamBits_GET_DISPLAY_CTL { - unsigned _reserved_1 : 2; /* D[1:0] */ - unsigned BL : 1; /* D[2] */ - unsigned DD : 1; /* D[3] */ - unsigned _reserved_2 : 1; /* D[4] */ - unsigned BCTRL : 1; /* D[5] */ - unsigned _reserved_3 : 1; /* D[7:6] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_DISPLAY_CTL; - -typedef union { - struct ILI9341ParamBits_SET_CABC { - unsigned C : 2; /* D[1:0] */ - unsigned _reserved_1 : 6; /* D[7:2] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_CABC; - -typedef union { - struct ILI9341ParamBits_GET_CABC { - unsigned C : 2; /* D[1:0] */ - unsigned _reserved_1 : 6; /* D[7:2] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_CABC; - -typedef union { - struct ILI9341ParamBits_SET_CABC_MIN { - uint8_t CMB; /* D[7:0] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_SET_CABC_MIN; - -typedef union { - struct ILI9341ParamBits_GET_CABC_MIN { - uint8_t CMB; /* D[7:0] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_GET_CABC_MIN; - -#if 0 /* TODO: Extended command structs.*/ - -typedef union { - struct ILI9341ParamBits { - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_; - -typedef union { - struct ILI9341ParamBits { - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - unsigned : 1; /* D[] */ - } bits; - uint8_t bytes[1]; -} ILI9341Params_; - -#endif /*0*/ - -#pragma pack(pop) - -/** @} */ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -extern ILI9341Driver ILI9341D1; - -#ifdef __cplusplus -extern "C" { -#endif - - void ili9341ObjectInit(ILI9341Driver *driverp); - void ili9341Start(ILI9341Driver *driverp, const ILI9341Config *configp); - void ili9341Stop(ILI9341Driver *driverp); -#if (ILI9341_USE_MUTUAL_EXCLUSION == TRUE) - void ili9341AcquireBusS(ILI9341Driver *driverp); - void ili9341AcquireBus(ILI9341Driver *driverp); - void ili9341ReleaseBusS(ILI9341Driver *driverp); - void ili9341ReleaseBus(ILI9341Driver *driverp); -#endif /* (ILI9341_USE_MUTUAL_EXCLUSION == TRUE) */ - void ili9341SelectI(ILI9341Driver *driverp); - void ili9341Select(ILI9341Driver *driverp); - void ili9341UnselectI(ILI9341Driver *driverp); - void ili9341Unselect(ILI9341Driver *driverp); - void ili9341WriteCommand(ILI9341Driver *driverp, uint8_t cmd); - void ili9341WriteByte(ILI9341Driver *driverp, uint8_t value); - uint8_t ili9341ReadByte(ILI9341Driver *driverp); - void ili9341WriteChunk(ILI9341Driver *driverp, const uint8_t chunk[], - size_t length); - void ili9341ReadChunk(ILI9341Driver *driverp, uint8_t chunk[], - size_t length); - -#ifdef __cplusplus -} -#endif - -/** @} */ - -#endif /* _ILI9341_H_ */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.c b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.c deleted file mode 100644 index 1cc52c9..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file l3gd20.c - * @brief L3GD20 MEMS interface module code. - * - * @addtogroup l3gd20 - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#include "l3gd20.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Reads a generic register value. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] reg register number - * @return register value. - */ -uint8_t l3gd20ReadRegister(SPIDriver *spip, uint8_t reg) { - uint8_t txbuf[2] = {L3GD20_RW | reg, 0xFF}; - uint8_t rxbuf[2] = {0x00, 0x00}; - spiSelect(spip); - spiExchange(spip, 2, txbuf, rxbuf); - spiUnselect(spip); - return rxbuf[1]; -} - - -void l3gd20WriteRegister(SPIDriver *spip, uint8_t reg, uint8_t value) { - - switch (reg) { - - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "lg3d20WriteRegister(), reserved register"); - case L3GD20_AD_WHO_AM_I: - case L3GD20_AD_OUT_TEMP : - case L3GD20_AD_STATUS_REG: - case L3GD20_AD_OUT_X_L: - case L3GD20_AD_OUT_X_H: - case L3GD20_AD_OUT_Y_L: - case L3GD20_AD_OUT_Y_H: - case L3GD20_AD_OUT_Z_L: - case L3GD20_AD_OUT_Z_H: - case L3GD20_AD_FIFO_SRC_REG: - case L3GD20_AD_INT1_SRC: - /* Read only registers cannot be written, the command is ignored.*/ - return; - case L3GD20_AD_CTRL_REG1: - case L3GD20_AD_CTRL_REG2: - case L3GD20_AD_CTRL_REG3: - case L3GD20_AD_CTRL_REG4: - case L3GD20_AD_CTRL_REG5: - case L3GD20_AD_REFERENCE: - case L3GD20_AD_FIFO_CTRL_REG: - case L3GD20_AD_INT1_CFG: - case L3GD20_AD_INT1_TSH_XH: - case L3GD20_AD_INT1_TSH_XL: - case L3GD20_AD_INT1_TSH_YH: - case L3GD20_AD_INT1_TSH_YL: - case L3GD20_AD_INT1_TSH_ZH: - case L3GD20_AD_INT1_TSH_ZL: - case L3GD20_AD_INT1_DURATION: - spiSelect(spip); - uint8_t txbuf[2] = {reg, value}; - spiSend(spip, 2, txbuf); - spiUnselect(spip); - } -} -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.h b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.h deleted file mode 100644 index 08d9092..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/l3gd20.h +++ /dev/null @@ -1,243 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file l3gd20.h - * @brief L3GD20 MEMS interface module header. - * - * @{ - */ - -#ifndef _L3GD20_H_ -#define _L3GD20_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define L3GD20_SENS_250DPS ((float)131.072f) /*!< gyroscope sensitivity with 250 dps full scale [LSB/dps] */ -#define L3GD20_SENS_500DPS ((float)65.536f) /*!< gyroscope sensitivity with 500 dps full scale [LSB/dps] */ -#define L3GD20_SENS_2000DPS ((float)16.384f) /*!< gyroscope sensitivity with 2000 dps full scale [LSB/dps] */ -/** - * @name L3GD20 register names - * @{ - */ -/******************************************************************************/ -/* */ -/* L3GD20 on board MEMS */ -/* */ -/******************************************************************************/ -/******************* Bit definition for SPI communication *******************/ -#define L3GD20_DI ((uint8_t)0xFF) /*!< DI[7:0] Data input */ -#define L3GD20_DI_0 ((uint8_t)0x01) /*!< bit 0 */ -#define L3GD20_DI_1 ((uint8_t)0x02) /*!< bit 1 */ -#define L3GD20_DI_2 ((uint8_t)0x04) /*!< bit 2 */ -#define L3GD20_DI_3 ((uint8_t)0x08) /*!< bit 3 */ -#define L3GD20_DI_4 ((uint8_t)0x10) /*!< bit 4 */ -#define L3GD20_DI_5 ((uint8_t)0x20) /*!< bit 5 */ -#define L3GD20_DI_6 ((uint8_t)0x40) /*!< bit 6 */ -#define L3GD20_DI_7 ((uint8_t)0x80) /*!< bit 7 */ - -#define L3GD20_AD ((uint8_t)0x3F) /*!< AD[5:0] Address Data */ -#define L3GD20_AD_0 ((uint8_t)0x01) /*!< bit 0 */ -#define L3GD20_AD_1 ((uint8_t)0x02) /*!< bit 1 */ -#define L3GD20_AD_2 ((uint8_t)0x04) /*!< bit 2 */ -#define L3GD20_AD_3 ((uint8_t)0x08) /*!< bit 3 */ -#define L3GD20_AD_4 ((uint8_t)0x10) /*!< bit 4 */ -#define L3GD20_AD_5 ((uint8_t)0x20) /*!< bit 5 */ - -#define L3GD20_MS ((uint8_t)0x40) /*!< Multiple read write */ -#define L3GD20_RW ((uint8_t)0x80) /*!< Read Write, 1 0 */ - -/****************** Bit definition for Registers Addresses *******************/ -#define L3GD20_AD_WHO_AM_I ((uint8_t)0x0F) /*!< WHO I AM */ -#define L3GD20_AD_CTRL_REG1 ((uint8_t)0x20) /*!< CONTROL REGISTER 1 */ -#define L3GD20_AD_CTRL_REG2 ((uint8_t)0x21) /*!< CONTROL REGISTER 2 */ -#define L3GD20_AD_CTRL_REG3 ((uint8_t)0x22) /*!< CONTROL REGISTER 3 */ -#define L3GD20_AD_CTRL_REG4 ((uint8_t)0x23) /*!< CONTROL REGISTER 4 */ -#define L3GD20_AD_CTRL_REG5 ((uint8_t)0x24) /*!< CONTROL REGISTER 5 */ -#define L3GD20_AD_REFERENCE ((uint8_t)0x25) /*!< REFERENCE/DATACAPTURE */ -#define L3GD20_AD_OUT_TEMP ((uint8_t)0x26) /*!< MEMS ONBOARD TEMP SENSOR */ -#define L3GD20_AD_STATUS_REG ((uint8_t)0x27) /*!< STATUS REGISTER */ -#define L3GD20_AD_OUT_X_L ((uint8_t)0x28) /*!< OUTPUT X-AXIS LOW */ -#define L3GD20_AD_OUT_X_H ((uint8_t)0x29) /*!< OUTPUT X-AXIS HIGH */ -#define L3GD20_AD_OUT_Y_L ((uint8_t)0x2A) /*!< OUTPUT Y-AXIS LOW */ -#define L3GD20_AD_OUT_Y_H ((uint8_t)0x2B) /*!< OUTPUT Y-AXIS HIGH */ -#define L3GD20_AD_OUT_Z_L ((uint8_t)0x2C) /*!< OUTPUT Z-AXIS LOW */ -#define L3GD20_AD_OUT_Z_H ((uint8_t)0x2D) /*!< OUTPUT Z-AXIS HIGH */ -#define L3GD20_AD_FIFO_CTRL_REG ((uint8_t)0x2E) /*!< FIFO CONTROL REGISTER */ -#define L3GD20_AD_FIFO_SRC_REG ((uint8_t)0x2F) /*!< FIFO SOURCE REGISTER */ -#define L3GD20_AD_INT1_CFG ((uint8_t)0x30) /*!< INTERRUPT1 CONFIG REGISTER */ -#define L3GD20_AD_INT1_SRC ((uint8_t)0x31) /*!< INTERRUPT1 SOURCE REGISTER */ -#define L3GD20_AD_INT1_TSH_XH ((uint8_t)0x32) /*!< INTERRUPT1 THRESHOLD X-AXIS HIGH */ -#define L3GD20_AD_INT1_TSH_XL ((uint8_t)0x33) /*!< INTERRUPT1 THRESHOLD X-AXIS LOW */ -#define L3GD20_AD_INT1_TSH_YH ((uint8_t)0x34) /*!< INTERRUPT1 THRESHOLD Y-AXIS HIGH */ -#define L3GD20_AD_INT1_TSH_YL ((uint8_t)0x35) /*!< INTERRUPT1 THRESHOLD Y-AXIS LOW */ -#define L3GD20_AD_INT1_TSH_ZH ((uint8_t)0x36) /*!< INTERRUPT1 THRESHOLD Z-AXIS HIGH */ -#define L3GD20_AD_INT1_TSH_ZL ((uint8_t)0x37) /*!< INTERRUPT1 THRESHOLD Z-AXIS LOW */ -#define L3GD20_AD_INT1_DURATION ((uint8_t)0x38) /*!< INTERRUPT1 DURATION */ - -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @name Gyroscope data structures and types - * @{ - */ - -/** - * @brief Gyroscope Output Data Rate - */ -typedef enum { - L3GD20_ODR_95Hz_Fc_12_5 = 0x00, /*!< Output Data Rate = 95 Hz - LPF Cut-Off = 12.5 Hz */ - L3GD20_ODR_95Hz_Fc_25 = 0x10, /*!< Output Data Rate = 95 Hz - LPF Cut-Off = 25 Hz */ - L3GD20_ODR_190Hz_Fc_12_5 = 0x40, /*!< Output Data Rate = 190 Hz - LPF Cut-Off = 12.5 Hz */ - L3GD20_ODR_190Hz_Fc_25 = 0x50, /*!< Output Data Rate = 190 Hz - LPF Cut-Off = 25 Hz */ - L3GD20_ODR_190Hz_Fc_50 = 0x60, /*!< Output Data Rate = 190 Hz - LPF Cut-Off = 50 Hz */ - L3GD20_ODR_190Hz_Fc_70 = 0x70, /*!< Output Data Rate = 190 Hz - LPF Cut-Off = 70 Hz */ - L3GD20_ODR_380Hz_Fc_20 = 0x80, /*!< Output Data Rate = 380 Hz - LPF Cut-Off = 20 Hz */ - L3GD20_ODR_380Hz_Fc_25 = 0x90, /*!< Output Data Rate = 380 Hz - LPF Cut-Off = 25 Hz */ - L3GD20_ODR_380Hz_Fc_50 = 0xA0, /*!< Output Data Rate = 380 Hz - LPF Cut-Off = 50 Hz */ - L3GD20_ODR_380Hz_Fc_100 = 0xB0, /*!< Output Data Rate = 380 Hz - LPF Cut-Off = 100 Hz */ - L3GD20_ODR_760Hz_Fc_30 = 0xC0, /*!< Output Data Rate = 760 Hz - LPF Cut-Off = 30 Hz */ - L3GD20_ODR_760Hz_Fc_35 = 0xD0, /*!< Output Data Rate = 760 Hz - LPF Cut-Off = 35 Hz */ - L3GD20_ODR_760Hz_Fc_50 = 0xE0, /*!< Output Data Rate = 760 Hz - LPF Cut-Off = 50 Hz */ - L3GD20_ODR_760Hz_Fc_100 = 0xF0 /*!< Output Data Rate = 760 Hz - LPF Cut-Off = 100 Hz */ -}L3GD20_ODR_t; - -/** - * @brief Gyroscope Power Mode - */ -typedef enum { - L3GD20_PM_POWER_DOWN = 0x00, /*!< Normal mode enabled */ - L3GD20_PM_SLEEP_NORMAL = 0x08 /*!< Low Power mode enabled */ -}L3GD20_PM_t; - -/** - * @brief Gyroscope Full Scale - */ -typedef enum { - L3GD20_FS_250DPS = 0x00, /*!< ±250 dps */ - L3GD20_FS_500DPS = 0x10, /*!< ±500 dps */ - L3GD20_FS_2000DPS = 0x20 /*!< ±200 dps */ -}L3GD20_FS_t; - -/** - * @brief Gyroscope Axes Enabling - */ -typedef enum { - L3GD20_AE_DISABLED = 0x00, /*!< All disabled */ - L3GD20_AE_X = 0x01, /*!< Only X */ - L3GD20_AE_Y = 0x02, /*!< Only Y */ - L3GD20_AE_XY = 0x03, /*!< X & Y */ - L3GD20_AE_Z = 0x04, /*!< Only Z */ - L3GD20_AE_XZ = 0x05, /*!< X & Z */ - L3GD20_AE_YZ = 0x06, /*!< Y & Z */ - L3GD20_AE_XYZ = 0x07 /*!< All enabled */ -}L3GD20_AE_t; - -/** - * @brief Gyroscope Block Data Update - */ -typedef enum { - L3GD20_BDU_CONTINOUS = 0x00, /*!< Continuos Update */ - L3GD20_BDU_BLOCKED = 0x80 /*!< Single Update: output registers not updated until MSB and LSB reading */ -}L3GD20_BDU_t; - -/** - * @brief Gyroscope Endianness - */ -typedef enum { - L3GD20_End_LITTLE = 0x00, /*!< Little Endian: data LSB @ lower address */ - L3GD20_End_BIG = 0x40 /*!< Big Endian: data MSB @ lower address */ -}L3GD20_End_t; - - -/** - * @brief Gyroscope configuration structure. - */ -typedef struct { - /** - * @brief Gyroscope fullscale value. - */ - L3GD20_FS_t fullscale; - /** - * @brief Gyroscope power mode selection. - */ - L3GD20_PM_t powermode; - /** - * @brief Gyroscope output data rate selection. - */ - L3GD20_ODR_t outputdatarate; - /** - * @brief Gyroscope axes enabling. - */ - L3GD20_AE_t axesenabling; - /** - * @brief Gyroscope endianess. - */ - L3GD20_End_t endianess; - /** - * @brief Gyroscope block data update. - */ - L3GD20_BDU_t blockdataupdate; -} L3GD20_Config; -/** @} */ -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - - uint8_t l3gd20ReadRegister(SPIDriver *spip, uint8_t reg); - void l3gd20WriteRegister(SPIDriver *spip, uint8_t reg, uint8_t value); -#ifdef __cplusplus -} -#endif - -#endif /* _L3GD20_H_ */ - -/** @} */ - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.c b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.c deleted file mode 100644 index 99b71e4..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file lis3mdl.c - * @brief LIS3MDL MEMS interface module through I2C code. - * - * @addtogroup lis3mdl - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#include "lis3mdl.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Reads a generic sub-register value. - * @pre The I2C interface must be initialized and the driver started. - * - * @param[in] i2cp pointer to the I2C interface - * @param[in] sad slave address without R bit - * @param[in] sub sub-register address - * @param[in] message pointer to message - * @return register value. - */ -uint8_t lis3mdlReadRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - msg_t* message) { - - uint8_t txbuf, rxbuf[2]; -#if defined(STM32F103_MCUCONF) - txbuf = LSM303DLHC_SUB_MSB | sub; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, TIME_INFINITE); - } - return rxbuf[0]; -#else - txbuf = sub; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 1, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 1, TIME_INFINITE); - } - return rxbuf[0]; -#endif -} - -/** - * @brief Writes a value into a register. - * @pre The I2C interface must be initialized and the driver started. - * - * @param[in] i2cp pointer to the I2C interface - * @param[in] sad slave address without R bit - * @param[in] sub sub-register address - * @param[in] value the value to be written - * @param[out] message pointer to message - */ -void lis3mdlWriteRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - uint8_t value, msg_t* message) { - - uint8_t txbuf[2]; - uint8_t rxbuf; - switch (sub) { - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "lis3mdlWriteRegister(), reserved register"); - case LIS3MDL_SUB_WHO_AM_I: - case LIS3MDL_SUB_STATUS_REG: - case LIS3MDL_SUB_OUT_X_L: - case LIS3MDL_SUB_OUT_X_H: - case LIS3MDL_SUB_OUT_Y_L: - case LIS3MDL_SUB_OUT_Y_H: - case LIS3MDL_SUB_OUT_Z_L: - case LIS3MDL_SUB_OUT_Z_H: - case LIS3MDL_SUB_INT_SOURCE: - case LIS3MDL_SUB_INT_THS_L: - case LIS3MDL_SUB_INT_THS_H: - /* Read only registers cannot be written, the command is ignored.*/ - return; - case LIS3MDL_SUB_CTRL_REG1: - case LIS3MDL_SUB_CTRL_REG2: - case LIS3MDL_SUB_CTRL_REG3: - case LIS3MDL_SUB_CTRL_REG4: - case LIS3MDL_SUB_CTRL_REG5: - case LIS3MDL_SUB_INT_CFG: - txbuf[0] = sub; - txbuf[1] = value; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, TIME_INFINITE); - } - break; - } -} -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.h b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.h deleted file mode 100644 index e55978e..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lis3mdl.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file lis3mdl.h - * @brief LIS3MDL MEMS interface module header. - * - * @{ - */ - -#ifndef _LIS3MDL_H_ -#define _LIS3MDL_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define LIS3MDL_COMP_SENS_4GA ((float)6842.0f) /*!< compass sensitivity with 4 GA full scale [LSB / Ga] */ -#define LIS3MDL_COMP_SENS_8GA ((float)3421.0f) /*!< compass sensitivity with 8 GA full scale [LSB / Ga] */ -#define LIS3MDL_COMP_SENS_12GA ((float)2281.0f) /*!< compass sensitivity with 12 GA full scale [LSB / Ga] */ -#define LIS3MDL_COMP_SENS_16GA ((float)1711.0f) /*!< compass sensitivity with 16 GA full scale [LSB / Ga] */ -/** - * @name LIS3MDL register names - * @{ - */ -/******************************************************************************/ -/* */ -/* LIS3MDL on board MEMS */ -/* */ -/******************************************************************************/ -/***************** Bit definition for I2C/SPI communication *****************/ -#define LIS3MDL_SUB ((uint8_t)0x7F) /*!< SUB[6:0] Sub-registers address Mask */ -#define LIS3MDL_SUB_0 ((uint8_t)0x01) /*!< bit 0 */ -#define LIS3MDL_SUB_1 ((uint8_t)0x02) /*!< bit 1 */ -#define LIS3MDL_SUB_2 ((uint8_t)0x08) /*!< bit 3 */ -#define LIS3MDL_SUB_4 ((uint8_t)0x10) /*!< bit 4 */ -#define LIS3MDL_SUB_5 ((uint8_t)0x20) /*!< bit 5 */ -#define LIS3MDL_SUB_6 ((uint8_t)0x40) /*!< bit 6 */ - -#define LIS3MDL_SUB_MSB ((uint8_t)0x80) /*!< Multiple data read\write bit */ - -/**************** Bit definition SUB-Registers Addresses ********************/ -#define LIS3MDL_SUB_WHO_AM_I ((uint8_t)0x0F) /*!< CONTROL REGISTER 1 */ -#define LIS3MDL_SUB_CTRL_REG1 ((uint8_t)0x20) /*!< CONTROL REGISTER 1 */ -#define LIS3MDL_SUB_CTRL_REG2 ((uint8_t)0x21) /*!< CONTROL REGISTER 2 */ -#define LIS3MDL_SUB_CTRL_REG3 ((uint8_t)0x22) /*!< CONTROL REGISTER 3 */ -#define LIS3MDL_SUB_CTRL_REG4 ((uint8_t)0x23) /*!< CONTROL REGISTER 4 */ -#define LIS3MDL_SUB_CTRL_REG5 ((uint8_t)0x24) /*!< CONTROL REGISTER 5 */ -#define LIS3MDL_SUB_STATUS_REG ((uint8_t)0x27) /*!< STATUS REGISTER */ -#define LIS3MDL_SUB_OUT_X_L ((uint8_t)0x28) /*!< OUTPUT X-AXIS LOW */ -#define LIS3MDL_SUB_OUT_X_H ((uint8_t)0x29) /*!< OUTPUT X-AXIS HIGH */ -#define LIS3MDL_SUB_OUT_Y_L ((uint8_t)0x2A) /*!< OUTPUT Y-AXIS LOW */ -#define LIS3MDL_SUB_OUT_Y_H ((uint8_t)0x2B) /*!< OUTPUT Y-AXIS HIGH */ -#define LIS3MDL_SUB_OUT_Z_L ((uint8_t)0x2C) /*!< OUTPUT Z-AXIS LOW */ -#define LIS3MDL_SUB_OUT_Z_H ((uint8_t)0x2D) /*!< OUTPUT Z-AXIS HIGH */ -#define LIS3MDL_SUB_INT_CFG ((uint8_t)0x30) /*!< INTERRUPT1 CONFIG */ -#define LIS3MDL_SUB_INT_SOURCE ((uint8_t)0x31) /*!< INTERRUPT1 SOURCE */ -#define LIS3MDL_SUB_INT_THS_L ((uint8_t)0x32) /*!< INTERRUPT1 THRESHOLD */ -#define LIS3MDL_SUB_INT_THS_H ((uint8_t)0x33) /*!< INTERRUPT1 DURATION */ - -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @name Compass data structures and types - * @{ - */ - -/** - * @brief Compass Slave Address - */ -typedef enum { - LIS3MDL_SAD_GND = 0x1C, /*!< COMPASS Slave Address when SA1 is to GND */ - LIS3MDL_SAD_VCC = 0x1E /*!< COMPASS Slave Address when SA1 is to VCC */ -}LIS3MDL_SAD_t; - -/** - * @brief Compass Operation Mode for X and Y axes - */ -typedef enum { - LIS3MDL_OMXY_LOW_POWER = 0x00, /*!< Operation Mode XY low power */ - LIS3MDL_OMXY_MEDIUM_PERFORMANCE = 0x20, /*!< Operation Mode XY medium performance */ - LIS3MDL_OMXY_HIGH_PERFORMANCE = 0x40, /*!< Operation Mode XY high performance */ - LIS3MDL_OMXY_ULTRA_PERFORMANCE = 0x60 /*!< Operation Mode XY ultra performance */ -}LIS3MDL_OMXY_t; - -/** - * @brief Compass Output Data Rate - */ -typedef enum { - LIS3MDL_ODR_0_625Hz = 0x00, /*!< Output Data Rate = 0.625 Hz */ - LIS3MDL_ODR_1_25Hz = 0x04, /*!< Output Data Rate = 1.25 Hz */ - LIS3MDL_ODR_2_5Hz = 0x08, /*!< Output Data Rate = 2.5 Hz */ - LIS3MDL_ODR_5Hz = 0x0C, /*!< Output Data Rate = 5 Hz */ - LIS3MDL_ODR_10Hz = 0x10, /*!< Output Data Rate = 10 Hz */ - LIS3MDL_ODR_20Hz = 0x14, /*!< Output Data Rate = 20 Hz */ - LIS3MDL_ODR_40Hz = 0x18, /*!< Output Data Rate = 40 Hz */ - LIS3MDL_ODR_80Hz = 0x1C /*!< Output Data Rate = 80 Hz */ -}LIS3MDL_ODR_t; - -/** - * @brief Compass Full Scale - */ -typedef enum { - LIS3MDL_FS_4GA = 0x00, /*!< ±4 Gauss */ - LIS3MDL_FS_8GA = 0x02, /*!< ±8 Gauss */ - LIS3MDL_FS_12GA = 0x04, /*!< ±12 Gauss */ - LIS3MDL_FS_16GA = 0x0C /*!< ±16 Gauss */ -}LIS3MDL_FS_t; - -/** - * @brief Compass Low Mode configuration - */ -typedef enum { - LIS3MDL_LOW_POWER_DISABLED = 0x00, /*!< Low Power mode disabled */ - LIS3MDL_LOW_POWER_ENABLED = 0x20 /*!< Low Power mode enabled */ -}LIS3MDL_PM_t; - -/** - * @brief Compass Mode - */ -typedef enum { - LIS3MDL_MD_CONTINOUS_CONVERSION = 0x00, /*!< Continous conversion mode */ - LIS3MDL_MD_SINGLE_CONVERSION = 0x01, /*!< Single conversion mode */ - LIS3MDL_MD_POWER_DOWN = 0x02 /*!< Power down mode */ -}LIS3MDL_MD_t; - - -/** - * @brief Compass Operation Mode for Z axis - */ -typedef enum { - LIS3MDL_OMZ_LOW_POWER = 0x00, /*!< Operation Mode Z low power */ - LIS3MDL_OMZ_MEDIUM_PERFORMANCE = 0x04, /*!< Operation Mode Z medium performance */ - LIS3MDL_OMZ_HIGH_PERFORMANCE = 0x08, /*!< Operation Mode Z high performance */ - LIS3MDL_OMZ_ULTRA_PERFORMANCE = 0x0C /*!< Operation Mode Z ultra performance */ -}LIS3MDL_OMZ_t; - -/** - * @brief Compass Endianness - */ -typedef enum { - LIS3MDL_End_LITTLE = 0x00, /*!< Little Endian: data LSB @ lower address */ - LIS3MDL_End_BIG = 0x02 /*!< Big Endian: data MSB @ lower address */ -}LIS3MDL_End_t; - -/** - * @brief Compass Block Data Update - */ -typedef enum { - LIS3MDL_BDU_CONTINOUS = 0x00, /*!< Continuos Update */ - LIS3MDL_BDU_BLOCKED = 0x40 /*!< Single Update: output registers not updated until MSB and LSB reading */ -}LIS3MDL_BDU_t; - - - - -/** - * @brief Gyroscope configuration structure. - */ -typedef struct { - /** - * @brief Compass Slave Address - */ - LIS3MDL_SAD_t slaveaddress; - /** - * @brief Compass Operation Mode for X and Y axes - */ - LIS3MDL_OMXY_t opmodexy; - /** - * @brief Compass Output Data Rate - */ - LIS3MDL_ODR_t outputdatarate; - /** - * @brief Compass Full Scale - */ - LIS3MDL_FS_t fullscale; - /** - * @brief Compass Low Mode configuration - */ - LIS3MDL_PM_t lowpowermode; - /** - * @brief Compass Mode - */ - LIS3MDL_MD_t mode; - /** - * @brief Compass Operation Mode for Z axis - */ - LIS3MDL_OMZ_t opmodez; - /** - * @brief Compass Endianness - */ - LIS3MDL_End_t endianess; - /** - * @brief Compass Block Data Update - */ - LIS3MDL_BDU_t blockdataupdate; -} LIS3MDL_Config; -/** @} */ -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - - uint8_t lis3mdlReadRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - msg_t* message); - void lis3mdlWriteRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - uint8_t value, msg_t* message); -#ifdef __cplusplus -} -#endif - -#endif /* _LIS3MDL_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.c b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.c deleted file mode 100644 index 070c49c..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file lsm303dlhc.c - * @brief LSM303DLHC MEMS interface module through I2C code. - * - * @addtogroup lsm303dlhc - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#include "lsm303dlhc.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Reads a generic sub-register value. - * @pre The I2C interface must be initialized and the driver started. - * - * @param[in] i2cp pointer to the I2C interface - * @param[in] sad slave address without R bit - * @param[in] sub sub-register address - * @param[in] message pointer to message - * @return register value. - */ -uint8_t lsm303dlhcReadRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - msg_t* message) { - - uint8_t txbuf, rxbuf[2]; -#if defined(STM32F103_MCUCONF) - txbuf = LSM303DLHC_SUB_MSB | sub; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, TIME_INFINITE); - } - return rxbuf[0]; -#else - txbuf = sub; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 1, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 1, TIME_INFINITE); - } - return rxbuf[0]; -#endif - - -} - -/** - * @brief Writes a value into a register. - * @pre The I2C interface must be initialized and the driver started. - * - * @param[in] i2cp pointer to the I2C interface - * @param[in] sad slave address without R bit - * @param[in] sub sub-register address - * @param[in] value the value to be written - * @param[out] message pointer to message - */ -void lsm303dlhcWriteRegister(I2CDriver *i2cp,uint8_t sad, uint8_t sub, - uint8_t value, msg_t* message) { - - uint8_t txbuf[2]; - uint8_t rxbuf; - if(sad == LSM303DLHC_SAD_ACCEL){ - switch (sub) { - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "lsm303dlhcWriteRegister(), reserved register"); - case LSM303DLHC_SUB_ACC_STATUS_REG: - case LSM303DLHC_SUB_ACC_OUT_X_L: - case LSM303DLHC_SUB_ACC_OUT_X_H: - case LSM303DLHC_SUB_ACC_OUT_Y_L: - case LSM303DLHC_SUB_ACC_OUT_Y_H: - case LSM303DLHC_SUB_ACC_OUT_Z_L: - case LSM303DLHC_SUB_ACC_OUT_Z_H: - case LSM303DLHC_SUB_ACC_FIFO_SRC_REG: - case LSM303DLHC_SUB_ACC_INT1_SOURCE: - case LSM303DLHC_SUB_ACC_INT2_SOURCE: - case LSM303DLHC_SUB_ACC_CLICK_SRC: - /* Read only registers cannot be written, the command is ignored.*/ - return; - case LSM303DLHC_SUB_ACC_CTRL_REG1: - case LSM303DLHC_SUB_ACC_CTRL_REG2: - case LSM303DLHC_SUB_ACC_CTRL_REG3: - case LSM303DLHC_SUB_ACC_CTRL_REG4: - case LSM303DLHC_SUB_ACC_CTRL_REG5: - case LSM303DLHC_SUB_ACC_CTRL_REG6: - case LSM303DLHC_SUB_ACC_REFERENCE: - case LSM303DLHC_SUB_ACC_FIFO_CTRL_REG: - case LSM303DLHC_SUB_ACC_INT1_CFG: - case LSM303DLHC_SUB_ACC_INT1_THS: - case LSM303DLHC_SUB_ACC_INT1_DURATION: - case LSM303DLHC_SUB_ACC_INT2_CFG: - case LSM303DLHC_SUB_ACC_INT2_THS: - case LSM303DLHC_SUB_ACC_INT2_DURATION: - case LSM303DLHC_SUB_ACC_CLICK_CFG: - case LSM303DLHC_SUB_ACC_CLICK_THS: - case LSM303DLHC_SUB_ACC_TIME_LIMIT: - case LSM303DLHC_SUB_ACC_TIME_LATENCY: - case LSM303DLHC_SUB_ACC_TIME_WINDOW: - txbuf[0] = sub; - txbuf[1] = value; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, TIME_INFINITE); - } - break; - } - } - else if(sad == LSM303DLHC_SAD_COMPASS){ - switch (sub) { - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "lsm303dlhcWriteRegister(), reserved register"); - case LSM303DLHC_SUB_COMP_OUT_X_H: - case LSM303DLHC_SUB_COMP_OUT_X_L: - case LSM303DLHC_SUB_COMP_OUT_Z_H: - case LSM303DLHC_SUB_COMP_OUT_Z_L: - case LSM303DLHC_SUB_COMP_OUT_Y_H: - case LSM303DLHC_SUB_COMP_OUT_Y_L: - case LSM303DLHC_SUB_COMP_SR_REG: - case LSM303DLHC_SUB_COMP_IRA_REG: - case LSM303DLHC_SUB_COMP_IRB_REG: - case LSM303DLHC_SUB_COMP_IRC_REG: - case LSM303DLHC_SUB_COMP_TEMP_OUT_H: - case LSM303DLHC_SUB_COMP_TEMP_OUT_L: - /* Read only registers cannot be written, the command is ignored.*/ - return; - case LSM303DLHC_SUB_COMP_CRA_REG: - case LSM303DLHC_SUB_COMP_CRB_REG: - case LSM303DLHC_SUB_COMP_MR_REG: - txbuf[0] = sub; - txbuf[1] = value; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, TIME_INFINITE); - } - break; - } - } -} -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.h b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.h deleted file mode 100644 index 46b51bc..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm303dlhc.h +++ /dev/null @@ -1,352 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file lsm303dlhc.h - * @brief LSM303DLHC MEMS interface module through I2C header. - * - * @addtogroup lsm303dlhc - * @{ - */ - -#ifndef _LSM303DLHC_H_ -#define _LSM303DLHC_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define LSM303DLHC_ACC_SENS_2G ((float)1671.836f) /*!< Accelerometer sensitivity with 2 G full scale [LSB * s^2 / m] */ -#define LSM303DLHC_ACC_SENS_4G ((float)835.918f) /*!< Accelerometer sensitivity with 4 G full scale [LSB * s^2 / m] */ -#define LSM303DLHC_ACC_SENS_8G ((float)417.959f) /*!< Accelerometer sensitivity with 8 G full scale [LSB * s^2 / m] */ -#define LSM303DLHC_ACC_SENS_16G ((float)208.979f) /*!< Accelerometer sensitivity with 16 G full scale [LSB * s^2 / m] */ - -#define LSM303DLHC_COMP_SENS_XY_1_3GA ((float)1100.0f) /*!< Compass sensitivity with 1.3 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_XY_1_9GA ((float)855.0f) /*!< Compass sensitivity with 1.9 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_XY_2_5GA ((float)670.0f) /*!< Compass sensitivity with 2.5 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_XY_4_0GA ((float)450.0f) /*!< Compass sensitivity with 4.0 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_XY_4_7GA ((float)400.0f) /*!< Compass sensitivity with 4.7 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_XY_5_6GA ((float)330.0f) /*!< Compass sensitivity with 5.6 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_XY_8_1GA ((float)230.0f) /*!< Compass sensitivity with 8.1 GA full scale [LSB / Ga] */ - -#define LSM303DLHC_COMP_SENS_Z_1_3GA ((float)980.0f) /*!< Compass sensitivity with 1.3 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_Z_1_9GA ((float)765.0f) /*!< Compass sensitivity with 1.9 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_Z_2_5GA ((float)600.0f) /*!< Compass sensitivity with 2.5 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_Z_4_0GA ((float)400.0f) /*!< Compass sensitivity with 4.0 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_Z_4_7GA ((float)355.0f) /*!< Compass sensitivity with 4.7 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_Z_5_6GA ((float)295.0f) /*!< Compass sensitivity with 5.6 GA full scale [LSB / Ga] */ -#define LSM303DLHC_COMP_SENS_Z_8_1GA ((float)205.0f) /*!< Compass sensitivity with 8.1 GA full scale [LSB / Ga] */ -/** - * @name LSM303DLHC register names - * @{ - */ -/******************************************************************************/ -/* */ -/* LSM303DLHC on board MEMS */ -/* */ -/******************************************************************************/ -/******************* Bit definition for I2C communication *******************/ -#define LSM303DLHC_SAD ((uint8_t)0x7F) /*!< SAD[6:0] Slave Address Mask */ -#define LSM303DLHC_SAD_ACCEL ((uint8_t)0x19) /*!< ACCELEROMETER Slave Address */ -#define LSM303DLHC_SAD_COMPASS ((uint8_t)0x1E) /*!< MAGNETOMETER Slave Address */ - -#define LSM303DLHC_SUB ((uint8_t)0x7F) /*!< SUB[6:0] Sub-registers address Mask */ -#define LSM303DLHC_SUB_0 ((uint8_t)0x01) /*!< bit 0 */ -#define LSM303DLHC_SUB_1 ((uint8_t)0x02) /*!< bit 1 */ -#define LSM303DLHC_SUB_2 ((uint8_t)0x08) /*!< bit 3 */ -#define LSM303DLHC_SUB_4 ((uint8_t)0x10) /*!< bit 4 */ -#define LSM303DLHC_SUB_5 ((uint8_t)0x20) /*!< bit 5 */ -#define LSM303DLHC_SUB_6 ((uint8_t)0x40) /*!< bit 6 */ - -#define LSM303DLHC_SUB_MSB ((uint8_t)0x80) /*!< Multiple data read\write bit */ - -/******** Bit definition for Accelerometer SUB-Registers Addresses **********/ -#define LSM303DLHC_SUB_ACC_CTRL_REG1 ((uint8_t)0x20) /*!< CONTROL REGISTER 1 FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CTRL_REG2 ((uint8_t)0x21) /*!< CONTROL REGISTER 2 FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CTRL_REG3 ((uint8_t)0x22) /*!< CONTROL REGISTER 3 FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CTRL_REG4 ((uint8_t)0x23) /*!< CONTROL REGISTER 4 FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CTRL_REG5 ((uint8_t)0x24) /*!< CONTROL REGISTER 5 FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CTRL_REG6 ((uint8_t)0x25) /*!< CONTROL REGISTER 6 FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_REFERENCE ((uint8_t)0x26) /*!< REFERENCE/DATACAPTURE FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_STATUS_REG ((uint8_t)0x27) /*!< STATUS REGISTER FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_OUT_X_L ((uint8_t)0x28) /*!< OUTPUT X-AXIS LOW FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_OUT_X_H ((uint8_t)0x29) /*!< OUTPUT X-AXIS HIGH FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_OUT_Y_L ((uint8_t)0x2A) /*!< OUTPUT Y-AXIS LOW FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_OUT_Y_H ((uint8_t)0x2B) /*!< OUTPUT Y-AXIS HIGH FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_OUT_Z_L ((uint8_t)0x2C) /*!< OUTPUT Z-AXIS LOW FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_OUT_Z_H ((uint8_t)0x2D) /*!< OUTPUT Z-AXIS HIGH FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_FIFO_CTRL_REG ((uint8_t)0x2E) /*!< FIFO CONTROL REGISTER FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_FIFO_SRC_REG ((uint8_t)0x2F) /*!< FIFO SOURCE REGISTER FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT1_CFG ((uint8_t)0x30) /*!< INTERRUPT1 CONFIG FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT1_SOURCE ((uint8_t)0x31) /*!< INTERRUPT1 SOURCE FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT1_THS ((uint8_t)0x32) /*!< INTERRUPT1 THRESHOLD FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT1_DURATION ((uint8_t)0x33) /*!< INTERRUPT1 DURATION FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT2_CFG ((uint8_t)0x34) /*!< INTERRUPT2 CONFIG FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT2_SOURCE ((uint8_t)0x35) /*!< INTERRUPT2 SOURCE FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT2_THS ((uint8_t)0x36) /*!< INTERRUPT2 THRESHOLD FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_INT2_DURATION ((uint8_t)0x37) /*!< INTERRUPT2 DURATION FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CLICK_CFG ((uint8_t)0x38) /*!< CLICK CONFIG FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CLICK_SRC ((uint8_t)0x39) /*!< CLICK SOURCE FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_CLICK_THS ((uint8_t)0x3A) /*!< CLICK THRESHOLD FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_TIME_LIMIT ((uint8_t)0x3B) /*!< TIME LIMIT FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_TIME_LATENCY ((uint8_t)0x3C) /*!< TIME LATENCY FOR ACCELEROMETER */ -#define LSM303DLHC_SUB_ACC_TIME_WINDOW ((uint8_t)0x3D) /*!< TIME WINDOW FOR ACCELEROMETER */ - -/********* Bit definition for Compass SUB-Registers Addresses **********/ -#define LSM303DLHC_SUB_COMP_CRA_REG ((uint8_t)0x00) /*!< CONTROL REGISTER A FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_CRB_REG ((uint8_t)0x01) /*!< CONTROL REGISTER B FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_MR_REG ((uint8_t)0x02) /*!< STATUS REGISTER FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_OUT_X_H ((uint8_t)0x03) /*!< OUTPUT X-AXIS HIGH FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_OUT_X_L ((uint8_t)0x04) /*!< OUTPUT X-AXIS LOW FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_OUT_Z_H ((uint8_t)0x05) /*!< OUTPUT Z-AXIS HIGH FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_OUT_Z_L ((uint8_t)0x06) /*!< OUTPUT Z-AXIS LOW FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_OUT_Y_H ((uint8_t)0x07) /*!< OUTPUT Y-AXIS HIGH FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_OUT_Y_L ((uint8_t)0x08) /*!< OUTPUT Y-AXIS LOW FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_SR_REG ((uint8_t)0x09) /*!< SR REGISTER FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_IRA_REG ((uint8_t)0x0A) /*!< IR A REGISTER FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_IRB_REG ((uint8_t)0x0B) /*!< IR B REGISTER FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_IRC_REG ((uint8_t)0x0C) /*!< IR C REGISTER FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_TEMP_OUT_H ((uint8_t)0x31) /*!< OUTPUT TEMP HIGH FOR MAGNETOMETER */ -#define LSM303DLHC_SUB_COMP_TEMP_OUT_L ((uint8_t)0x32) /*!< OUTPUT TEMP LOW FOR MAGNETOMETER */ - -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @name Accelerometer data structures and types - * @{ - */ - -/** - * @brief Accelerometer Output Data Rate - */ -typedef enum -{ - LSM303DLHC_ACC_ODR_PD = 0x00, /*!< Power down */ - LSM303DLHC_ACC_ODR_1Hz = 0x10, /*!< Output Data Rate = 1 Hz */ - LSM303DLHC_ACC_ODR_10Hz = 0x20, /*!< Output Data Rate = 10 Hz */ - LSM303DLHC_ACC_ODR_25Hz = 0x30, /*!< Output Data Rate = 25 Hz */ - LSM303DLHC_ACC_ODR_50Hz = 0x40, /*!< Output Data Rate = 50 Hz */ - LSM303DLHC_ACC_ODR_100Hz = 0x50, /*!< Output Data Rate = 100 Hz */ - LSM303DLHC_ACC_ODR_200Hz = 0x60, /*!< Output Data Rate = 200 Hz */ - LSM303DLHC_ACC_ODR_400Hz = 0x70, /*!< Output Data Rate = 400 Hz */ - LSM303DLHC_ACC_ODR_1620Hz = 0x80, /*!< Output Data Rate = 1620 Hz Low Power mode only */ - LSM303DLHC_ACC_ODR_1344Hz = 0x90 /*!< Output Data Rate = 1344 Hz in Normal mode and 5376 Hz in Low Power Mode */ -}LSM303DLHC_ACC_ODR_t; - -/** - * @brief Accelerometer Power Mode - */ -typedef enum -{ - LSM303DLHC_ACC_PM_NORMAL = 0x00, /*!< Normal mode enabled */ - LSM303DLHC_ACC_PM_LOW_POWER = 0x08 /*!< Low Power mode enabled */ -}LSM303DLHC_ACC_PM_t; - -/** - * @brief Accelerometer Full Scale - */ -typedef enum -{ - LSM303DLHC_ACC_FS_2G = 0x00, /*!< ±2 g m/s^2 */ - LSM303DLHC_ACC_FS_4G = 0x10, /*!< ±4 g m/s^2 */ - LSM303DLHC_ACC_FS_8G = 0x20, /*!< ±8 g m/s^2 */ - LSM303DLHC_ACC_FS_16G = 0x30 /*!< ±16 g m/s^2 */ -}LSM303DLHC_ACC_FS_t; - -/** - * @brief Accelerometer Axes Enabling - */ -typedef enum{ - LSM303DLHC_ACC_AE_DISABLED = 0x00, /*!< Axes all disabled */ - LSM303DLHC_ACC_AE_X = 0x01, /*!< Only X-axis enabled */ - LSM303DLHC_ACC_AE_Y = 0x02, /*!< Only Y-axis enabled */ - LSM303DLHC_ACC_AE_XY = 0x03, /*!< X & Y axes enabled */ - LSM303DLHC_ACC_AE_Z = 0x04, /*!< Only Z-axis enabled */ - LSM303DLHC_ACC_AE_XZ = 0x05, /*!< X & Z axes enabled */ - LSM303DLHC_ACC_AE_YZ = 0x06, /*!< Y & Z axes enabled */ - LSM303DLHC_ACC_AE_XYZ = 0x07 /*!< All axes enabled */ -}LSM303DLHC_ACC_AE_t; - -/** - * @brief Accelerometer Block Data Update - */ -typedef enum -{ - LSM303DLHC_ACC_BDU_CONTINOUS = 0x00, /*!< Continuos Update */ - LSM303DLHC_ACC_BDU_BLOCKED = 0x80 /*!< Single Update: output registers not updated until MSB and LSB reading */ -}LSM303DLHC_ACC_BDU_t; - -/** - * @brief Accelerometer Endianness - */ -typedef enum -{ - LSM303DLHC_ACC_End_LITTLE = 0x00, /*!< Little Endian: data LSB @ lower address */ - LSM303DLHC_ACC_End_BIG = 0x40 /*!< Big Endian: data MSB @ lower address */ -}LSM303DLHC_ACC_End_t; - -/** - * @brief Accelerometer High Resolution mode - */ -typedef enum -{ - LSM303DLHC_ACC_HR_Enabled = 0x08, /*!< High resolution output mode enabled */ - LSM303DLHC_ACC_HR_Disabled = 0x00 /*!< High resolution output mode disabled */ -}LSM303DLHC_ACC_HR_t; - -/** - * @brief Accelerometer configuration structure. - */ -typedef struct { - /** - * @brief Accelerometer fullscale value. - */ - LSM303DLHC_ACC_FS_t fullscale; - /** - * @brief Accelerometer power mode selection. - */ - LSM303DLHC_ACC_PM_t powermode; - /** - * @brief Accelerometer output data rate selection. - */ - LSM303DLHC_ACC_ODR_t outputdatarate; - /** - * @brief Accelerometer axes enabling. - */ - LSM303DLHC_ACC_AE_t axesenabling; - /** - * @brief Accelerometer block data update. - */ - LSM303DLHC_ACC_BDU_t blockdataupdate; - /** - * @brief Accelerometer block data update. - */ - LSM303DLHC_ACC_HR_t highresmode; -} LSM303DLHC_ACC_Config; -/** @} */ - - -/** - * @name Compass data types - * @{ - */ - -/** - * @brief Compass Output Data Rate - */ -typedef enum -{ - LSM303DLHC_COMP_ODR_0_75_Hz = 0x00, /*!< Output Data Rate = 0.75 Hz */ - LSM303DLHC_COMP_ODR_1_5_Hz = 0x04, /*!< Output Data Rate = 1.5 Hz */ - LSM303DLHC_COMP_ODR_3_0_Hz = 0x08, /*!< Output Data Rate = 3 Hz */ - LSM303DLHC_COMP_ODR_7_5_Hz = 0x0C, /*!< Output Data Rate = 7.5 Hz */ - LSM303DLHC_COMP_ODR_15_Hz = 0x10, /*!< Output Data Rate = 15 Hz */ - LSM303DLHC_COMP_ODR_30_Hz = 0x14, /*!< Output Data Rate = 30 Hz */ - LSM303DLHC_COMP_ODR_75_Hz = 0x18, /*!< Output Data Rate = 75 Hz */ - LSM303DLHC_COMP_ODR_220_Hz = 0x1C /*!< Output Data Rate = 220 Hz */ -}LSM303DLHC_COMP_ODR_t; - - -/** - * @brief Compass Full Scale - */ -typedef enum -{ - LSM303DLHC_COMP_FS_1_3_GA = 0x20, /*!< Full scale = ±1.3 Gauss */ - LSM303DLHC_COMP_FS_1_9_GA = 0x40, /*!< Full scale = ±1.9 Gauss */ - LSM303DLHC_COMP_FS_2_5_GA = 0x60, /*!< Full scale = ±2.5 Gauss */ - LSM303DLHC_COMP_FS_4_0_GA = 0x80, /*!< Full scale = ±4.0 Gauss */ - LSM303DLHC_COMP_FS_4_7_GA = 0xA0, /*!< Full scale = ±4.7 Gauss */ - LSM303DLHC_COMP_FS_5_6_GA = 0xC0, /*!< Full scale = ±5.6 Gauss */ - LSM303DLHC_COMP_FS_8_1_GA = 0xE0 /*!< Full scale = ±8.1 Gauss */ -}LSM303DLHC_COMP_FS_t; - - -/** - * @brief Compass Working Mode - */ -typedef enum -{ - LSM303DLHC_COMP_WM_CONTINUOS = 0x00, /*!< Continuous-Conversion Mode */ - LSM303DLHC_COMP_WM_BLOCKED = 0x01, /*!< Single-Conversion Mode */ - LSM303DLHC_COMP_WM_SLEEP = 0x02 /*!< Sleep Mode */ -}LSM303DLHC_COMP_WM_t; - -/** - * @brief Compass configuration structure. - */ -typedef struct { - /** - * @brief Compass fullscale value. - */ - LSM303DLHC_COMP_FS_t fullscale; - /** - * @brief Compass output data rate selection. - */ - LSM303DLHC_COMP_ODR_t outputdatarate; - /** - * @brief Compass working mode. - */ - LSM303DLHC_COMP_WM_t workingmode; -} LSM303DLHC_COMP_Config; -/** @} */ -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - - uint8_t lsm303dlhcReadRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - msg_t* message); - void lsm303dlhcWriteRegister(I2CDriver *i2cp,uint8_t sad, uint8_t sub, - uint8_t value, msg_t* message); - -#ifdef __cplusplus -} -#endif -#endif /* _LSM303DLHC_H_ */ -/** @} */ - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.c b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.c deleted file mode 100644 index da67f12..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file lsm6ds0.c - * @brief LSM6DS0 MEMS interface module through I2C code. - * - * @addtogroup lsm6ds0 - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#include "lsm6ds0.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Reads a generic sub-register value. - * @pre The I2C interface must be initialized and the driver started. - * - * @param[in] i2cp pointer to the I2C interface - * @param[in] sad slave address without R bit - * @param[in] sub sub-register address - * @param[in] message pointer to message - * @return register value. - */ -uint8_t lsm6ds0ReadRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - msg_t* message) { - - uint8_t txbuf, rxbuf[2]; -#if defined(STM32F103_MCUCONF) - txbuf = LSM303DLHC_SUB_MSB | sub; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 2, TIME_INFINITE); - } - return rxbuf[0]; -#else - txbuf = sub; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 1, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, &txbuf, 1, rxbuf, 1, TIME_INFINITE); - } - return rxbuf[0]; -#endif -} - -/** - * @brief Writes a value into a register. - * @pre The I2C interface must be initialized and the driver started. - * - * @param[in] i2cp pointer to the I2C interface - * @param[in] sad slave address without R bit - * @param[in] sub sub-register address - * @param[in] value the value to be written - * @param[out] message pointer to message - */ -void lsm6ds0WriteRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - uint8_t value, msg_t* message) { - - uint8_t txbuf[2]; - uint8_t rxbuf; - switch (sub) { - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "lsm6ds0WriteRegister(), reserved register"); - case LSM6DS0_SUB_WHO_AM_I: - case LSM6DS0_SUB_INT_GEN_SRC_G: - case LSM6DS0_SUB_OUT_TEMP_L: - case LSM6DS0_SUB_OUT_TEMP_H: - case LSM6DS0_SUB_STATUS_REG1: - case LSM6DS0_SUB_OUT_X_L_G: - case LSM6DS0_SUB_OUT_X_H_G: - case LSM6DS0_SUB_OUT_Y_L_G: - case LSM6DS0_SUB_OUT_Y_H_G: - case LSM6DS0_SUB_OUT_Z_L_G: - case LSM6DS0_SUB_OUT_Z_H_G: - case LSM6DS0_SUB_INT_GEN_SRC_XL: - case LSM6DS0_SUB_STATUS_REG2: - case LSM6DS0_SUB_OUT_X_L_XL: - case LSM6DS0_SUB_OUT_X_H_XL: - case LSM6DS0_SUB_OUT_Y_L_XL: - case LSM6DS0_SUB_OUT_Y_H_XL: - case LSM6DS0_SUB_OUT_Z_L_XL: - case LSM6DS0_SUB_OUT_Z_H_XL: - case LSM6DS0_SUB_FIFO_SRC: - /* Read only registers cannot be written, the command is ignored.*/ - return; - case LSM6DS0_SUB_ACT_THS: - case LSM6DS0_SUB_ACT_DUR: - case LSM6DS0_SUB_INT_GEN_CFG_XL: - case LSM6DS0_SUB_INT_GEN_THS_X_XL: - case LSM6DS0_SUB_INT_GEN_THS_Y_XL: - case LSM6DS0_SUB_INT_GEN_THS_Z_XL: - case LSM6DS0_SUB_INT_GEN_DUR_XL: - case LSM6DS0_SUB_REFERENCE_G: - case LSM6DS0_SUB_INT_CTRL: - case LSM6DS0_SUB_CTRL_REG1_G: - case LSM6DS0_SUB_CTRL_REG2_G: - case LSM6DS0_SUB_CTRL_REG3_G: - case LSM6DS0_SUB_ORIENT_CFG_G: - case LSM6DS0_SUB_CTRL_REG4: - case LSM6DS0_SUB_CTRL_REG5_XL: - case LSM6DS0_SUB_CTRL_REG6_XL: - case LSM6DS0_SUB_CTRL_REG7_XL: - case LSM6DS0_SUB_CTRL_REG8: - case LSM6DS0_SUB_CTRL_REG9: - case LSM6DS0_SUB_CTRL_REG10: - case LSM6DS0_SUB_FIFO_CTRL: - case LSM6DS0_SUB_INT_GEN_CFG_G: - case LSM6DS0_SUB_INT_GEN_THS_XH_G: - case LSM6DS0_SUB_INT_GEN_THS_XL_G: - case LSM6DS0_SUB_INT_GEN_THS_YH_G: - case LSM6DS0_SUB_INT_GEN_THS_YL_G: - case LSM6DS0_SUB_INT_GEN_THS_ZH_G: - case LSM6DS0_SUB_INT_GEN_THS_ZL_G: - case LSM6DS0_SUB_INT_GEN_DUR_G: - txbuf[0] = sub; - txbuf[1] = value; - if(message != NULL){ - *message = i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, - TIME_INFINITE); - } - else{ - i2cMasterTransmitTimeout(i2cp, sad, txbuf, 2, &rxbuf, 0, TIME_INFINITE); - } - break; - } -} - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.h b/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.h deleted file mode 100644 index 57e2057..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/mems/lsm6ds0.h +++ /dev/null @@ -1,482 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file lsm6ds0.h - * @brief LSM6DS0 MEMS interface module header. - * - * @{ - */ - -#ifndef _LSM6DS0_H_ -#define _LSM6DS0_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define LSM6DS0_ACC_SENS_2G ((float)1671.095f) /*!< Accelerometer sensitivity with 2 G full scale [LSB * s^2 / m] */ -#define LSM6DS0_ACC_SENS_4G ((float)835.547f) /*!< Accelerometer sensitivity with 4 G full scale [LSB * s^2 / m] */ -#define LSM6DS0_ACC_SENS_8G ((float)417.774) /*!< Accelerometer sensitivity with 8 G full scale [LSB * s^2 / m] */ -#define LSM6DS0_ACC_SENS_16G ((float)139.258f) /*!< Accelerometer sensitivity with 16 G full scale [LSB * s^2 / m] */ - -#define LSM6DS0_GYRO_SENS_245DPS ((float)114.286f) /*!< Gyroscope sensitivity with 245 dps full scale [LSB * s / °] */ -#define LSM6DS0_GYRO_SENS_500DPS ((float)57.143f) /*!< Gyroscope sensitivity with 500 dps full scale [LSB * s / °] */ -#define LSM6DS0_GYRO_SENS_2000DPS ((float)14.286f) /*!< Gyroscope sensitivity with 2000 dps full scale [LSB * s / °] */ -/** - * @name LSM6DS0 register names - * @{ - */ -/******************************************************************************/ -/* */ -/* LSM6DS0 on board MEMS */ -/* */ -/******************************************************************************/ -/***************** Bit definition for I2C/SPI communication *****************/ -#define LSM6DS0_SUB ((uint8_t)0x7F) /*!< SUB[6:0] Sub-registers address Mask */ -#define LSM6DS0_SUB_0 ((uint8_t)0x01) /*!< bit 0 */ -#define LSM6DS0_SUB_1 ((uint8_t)0x02) /*!< bit 1 */ -#define LSM6DS0_SUB_2 ((uint8_t)0x08) /*!< bit 3 */ -#define LSM6DS0_SUB_4 ((uint8_t)0x10) /*!< bit 4 */ -#define LSM6DS0_SUB_5 ((uint8_t)0x20) /*!< bit 5 */ -#define LSM6DS0_SUB_6 ((uint8_t)0x40) /*!< bit 6 */ - -#define LSM6DS0_SUB_MSB ((uint8_t)0x80) /*!< Multiple data read\write bit */ - -/***************** Bit definition for Registers Addresses *******************/ -#define LSM6DS0_SUB_ACT_THS ((uint8_t)0x04) /*!< Activity threshold register */ -#define LSM6DS0_SUB_ACT_DUR ((uint8_t)0x05) /*!< Inactivity duration register */ -#define LSM6DS0_SUB_INT_GEN_CFG_XL ((uint8_t)0x06) /*!< Accelerometer interrupt generator configuration register */ -#define LSM6DS0_SUB_INT_GEN_THS_X_XL ((uint8_t)0x07) /*!< Accelerometer X-axis interrupt threshold register */ -#define LSM6DS0_SUB_INT_GEN_THS_Y_XL ((uint8_t)0x08) /*!< Accelerometer Y-axis interrupt threshold register */ -#define LSM6DS0_SUB_INT_GEN_THS_Z_XL ((uint8_t)0x09) /*!< Accelerometer Z-axis interrupt threshold register */ -#define LSM6DS0_SUB_INT_GEN_DUR_XL ((uint8_t)0x0A) /*!< Accelerometer interrupt duration register */ -#define LSM6DS0_SUB_REFERENCE_G ((uint8_t)0x0B) /*!< Gyroscope reference value register for digital high-pass filter */ -#define LSM6DS0_SUB_INT_CTRL ((uint8_t)0x0C) /*!< INT pin control register */ -#define LSM6DS0_SUB_WHO_AM_I ((uint8_t)0x0F) /*!< Who_AM_I register */ -#define LSM6DS0_SUB_CTRL_REG1_G ((uint8_t)0x10) /*!< Gyroscope control register 1 */ -#define LSM6DS0_SUB_CTRL_REG2_G ((uint8_t)0x11) /*!< Gyroscope control register 2 */ -#define LSM6DS0_SUB_CTRL_REG3_G ((uint8_t)0x12) /*!< Gyroscope control register 3 */ -#define LSM6DS0_SUB_ORIENT_CFG_G ((uint8_t)0x13) /*!< Gyroscope sign and orientation register */ -#define LSM6DS0_SUB_INT_GEN_SRC_G ((uint8_t)0x14) /*!< Gyroscope interrupt source register */ -#define LSM6DS0_SUB_OUT_TEMP_L ((uint8_t)0x15) /*!< Temperature data output low register */ -#define LSM6DS0_SUB_OUT_TEMP_H ((uint8_t)0x16) /*!< Temperature data output high register */ -#define LSM6DS0_SUB_STATUS_REG1 ((uint8_t)0x17) /*!< Status register 1 */ -#define LSM6DS0_SUB_OUT_X_L_G ((uint8_t)0x18) /*!< Gyroscope X-axis low output register */ -#define LSM6DS0_SUB_OUT_X_H_G ((uint8_t)0x19) /*!< Gyroscope X-axis high output register */ -#define LSM6DS0_SUB_OUT_Y_L_G ((uint8_t)0x1A) /*!< Gyroscope Y-axis low output register */ -#define LSM6DS0_SUB_OUT_Y_H_G ((uint8_t)0x1B) /*!< Gyroscope Y-axis high output register */ -#define LSM6DS0_SUB_OUT_Z_L_G ((uint8_t)0x1C) /*!< Gyroscope Z-axis low output register */ -#define LSM6DS0_SUB_OUT_Z_H_G ((uint8_t)0x1D) /*!< Gyroscope Z-axis high output register */ -#define LSM6DS0_SUB_CTRL_REG4 ((uint8_t)0x1E) /*!< Control register 4 */ -#define LSM6DS0_SUB_CTRL_REG5_XL ((uint8_t)0x1F) /*!< Accelerometer Control Register 5 */ -#define LSM6DS0_SUB_CTRL_REG6_XL ((uint8_t)0x20) /*!< Accelerometer Control Register 6 */ -#define LSM6DS0_SUB_CTRL_REG7_XL ((uint8_t)0x21) /*!< Accelerometer Control Register 7 */ -#define LSM6DS0_SUB_CTRL_REG8 ((uint8_t)0x22) /*!< Control register 8 */ -#define LSM6DS0_SUB_CTRL_REG9 ((uint8_t)0x23) /*!< Control register 9 */ -#define LSM6DS0_SUB_CTRL_REG10 ((uint8_t)0x24) /*!< Control register 10 */ -#define LSM6DS0_SUB_INT_GEN_SRC_XL ((uint8_t)0x26) /*!< Accelerometer interrupt source register */ -#define LSM6DS0_SUB_STATUS_REG2 ((uint8_t)0x27) /*!< Status register */ -#define LSM6DS0_SUB_OUT_X_L_XL ((uint8_t)0x28) /*!< Accelerometer X-axis low output register */ -#define LSM6DS0_SUB_OUT_X_H_XL ((uint8_t)0x29) /*!< Accelerometer X-axis high output register */ -#define LSM6DS0_SUB_OUT_Y_L_XL ((uint8_t)0x2A) /*!< Accelerometer Y-axis low output register */ -#define LSM6DS0_SUB_OUT_Y_H_XL ((uint8_t)0x2B) /*!< Accelerometer Y-axis high output register */ -#define LSM6DS0_SUB_OUT_Z_L_XL ((uint8_t)0x2C) /*!< Accelerometer Z-axis low output register */ -#define LSM6DS0_SUB_OUT_Z_H_XL ((uint8_t)0x2D) /*!< Accelerometer Z-axis high output register */ -#define LSM6DS0_SUB_FIFO_CTRL ((uint8_t)0x2E) /*!< FIFO control register */ -#define LSM6DS0_SUB_FIFO_SRC ((uint8_t)0x2F) /*!< FIFO status control register */ -#define LSM6DS0_SUB_INT_GEN_CFG_G ((uint8_t)0x30) /*!< Gyroscope interrupt generator configuration register */ -#define LSM6DS0_SUB_INT_GEN_THS_XH_G ((uint8_t)0x31) /*!< Gyroscope X-axis low interrupt generator threshold registers */ -#define LSM6DS0_SUB_INT_GEN_THS_XL_G ((uint8_t)0x32) /*!< Gyroscope X-axis high interrupt generator threshold registers */ -#define LSM6DS0_SUB_INT_GEN_THS_YH_G ((uint8_t)0x33) /*!< Gyroscope Y-axis low interrupt generator threshold registers */ -#define LSM6DS0_SUB_INT_GEN_THS_YL_G ((uint8_t)0x34) /*!< Gyroscope Y-axis high interrupt generator threshold registers */ -#define LSM6DS0_SUB_INT_GEN_THS_ZH_G ((uint8_t)0x35) /*!< Gyroscope Z-axis low interrupt generator threshold registers */ -#define LSM6DS0_SUB_INT_GEN_THS_ZL_G ((uint8_t)0x36) /*!< Gyroscope Z-axis high interrupt generator threshold registers */ -#define LSM6DS0_SUB_INT_GEN_DUR_G ((uint8_t)0x37) /*!< Gyroscope interrupt generator duration register */ - -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @name Generic LSM6DS0 data structures and types - * @{ - */ - -/** - * @brief Accelerometer and Gyroscope Slave Address - */ -typedef enum { - LSM6DS0_SAD_GND = 0x6A, /*!< LSM6DS0 Slave Address when SA1 is to GND */ - LSM6DS0_SAD_VCC = 0x6B /*!< LSM6DS0 Slave Address when SA1 is to VCC */ -}LSM6DS0_SAD_t; - -/** - * @brief Accelerometer and Gyroscope Block Data Update - */ -typedef enum -{ - LSM6DS0_BDU_CONTINOUS = 0x00, /*!< Continuos Update */ - LSM6DS0_BDU_BLOCKED = 0x40 /*!< Single Update: output registers not updated until MSB and LSB reading */ -}LSM6DS0_BDU_t; - -/** - * @brief Accelerometer and Gyroscope Endianness - */ -typedef enum -{ - LSM6DS0_END_LITTLE = 0x00, /*!< Little Endian: data LSB @ lower address */ - LSM6DS0_END_BIG = 0x20 /*!< Big Endian: data MSB @ lower address */ -}LSM6DS0_END_t; -/** @} */ - -/** - * @name Accelerometer data structures and types - * @{ - */ - -/** - * @brief Accelerometer Decimation Mode - */ -typedef enum { - LSM6DS0_ACC_DEC_DISABLED = 0x00, /*!< NO decimation */ - LSM6DS0_ACC_DEC_X2 = 0x40, /*!< Decimation update every 2 sample */ - LSM6DS0_ACC_DEC_X4 = 0x80, /*!< Decimation update every 4 sample */ - LSM6DS0_ACC_DEC_X8 = 0xC0 /*!< Decimation update every 8 sample */ -}LSM6DS0_ACC_DEC_t; - -/** - * @brief Accelerometer Axes Enabling - */ -typedef enum{ - LSM6DS0_ACC_AE_DISABLED = 0x00, /*!< Axes all disabled */ - LSM6DS0_ACC_AE_X = 0x08, /*!< Only X-axis enabled */ - LSM6DS0_ACC_AE_Y = 0x10, /*!< Only Y-axis enabled */ - LSM6DS0_ACC_AE_XY = 0x18, /*!< X & Y axes enabled */ - LSM6DS0_ACC_AE_Z = 0x20, /*!< Only Z-axis enabled */ - LSM6DS0_ACC_AE_XZ = 0x28, /*!< X & Z axes enabled */ - LSM6DS0_ACC_AE_YZ = 0x30, /*!< Y & Z axes enabled */ - LSM6DS0_ACC_AE_XYZ = 0x38 /*!< All axes enabled */ -}LSM6DS0_ACC_AE_t; - -/** - * @brief Accelerometer Output Data Rate - */ -typedef enum { - LSM6DS0_ACC_ODR_PD = 0x00, /*!< Power down */ - LSM6DS0_ACC_ODR_10Hz = 0x20, /*!< Output Data Rate = 10 Hz */ - LSM6DS0_ACC_ODR_50Hz = 0x40, /*!< Output Data Rate = 50 Hz */ - LSM6DS0_ACC_ODR_119Hz = 0x60, /*!< Output Data Rate = 119 Hz */ - LSM6DS0_ACC_ODR_238Hz = 0x80, /*!< Output Data Rate = 238 Hz */ - LSM6DS0_ACC_ODR_476Hz = 0xA0, /*!< Output Data Rate = 476 Hz */ - LSM6DS0_ACC_ODR_952Hz = 0xC0 /*!< Output Data Rate = 952 Hz */ -}LSM6DS0_ACC_ODR_t; - -/** - * @brief Accelerometer Full Scale - */ -typedef enum { - LSM6DS0_ACC_FS_2G = 0x00, /*!< ±2 g m/s^2 */ - LSM6DS0_ACC_FS_4G = 0x10, /*!< ±4 g m/s^2 */ - LSM6DS0_ACC_FS_8G = 0x18, /*!< ±8 g m/s^2 */ - LSM6DS0_ACC_FS_16G = 0x08 /*!< ±16 g m/s^2 */ -}LSM6DS0_ACC_FS_t; - -/** - * @brief Accelerometer Antialiasing filter Bandwidth Selection - */ -typedef enum { - LSM6DS0_ACC_BW_408Hz = 0x00, /*!< AA filter bandwidth = 408 Hz */ - LSM6DS0_ACC_BW_211Hz = 0x01, /*!< AA filter bandwidth = 211 Hz */ - LSM6DS0_ACC_BW_105Hz = 0x02, /*!< AA filter bandwidth = 105 Hz */ - LSM6DS0_ACC_BW_50Hz = 0x03, /*!< AA filter bandwidth = 50 Hz */ - LSM6DS0_ACC_BW_ACCORDED = 0x04, /*!< AA filter bandwidth chosen by ODR selection */ -}LSM6DS0_ACC_BW_t; - -/** - * @brief Accelerometer High Resolution mode - */ -typedef enum -{ - LSM6DS0_ACC_HR_Disabled = 0x00, /*!< High resolution output mode disabled, FDS bypassed */ - LSM6DS0_ACC_HR_EN_9 = 0xC4, /*!< High resolution output mode enabled, LP cutoff = ODR/9, FDS enabled */ - LSM6DS0_ACC_HR_EN_50 = 0x84, /*!< High resolution output mode enabled, LP cutoff = ODR/50, FDS enabled */ - LSM6DS0_ACC_HR_EN_100 = 0xA4, /*!< High resolution output mode enabled, LP cutoff = ODR/100, FDS enabled */ - LSM6DS0_ACC_HR_EN_400 = 0xE4, /*!< High resolution output mode enabled, LP cutoff = ODR/400, FDS enabled */ -}LSM6DS0_ACC_HR_t; - -/** - * @brief HP filter for interrupt - */ -typedef enum -{ - LSM6DS0_ACC_HPIS1_BYPASSED = 0x00, /*!< High-pass filter bypassed */ - LSM6DS0_ACC_HPIS1_ENABLED = 0x01 /*!< High-pass filter enabled for accelerometer interrupt function on interrupt */ -}LSM6DS0_ACC_HPIS1_t; - -/** - * @brief Accelerometer configuration structure. - */ -typedef struct { - - /** - * @brief LSM6DS0 Slave Address - */ - LSM6DS0_SAD_t slaveaddress; - /** - * @brief Accelerometer Decimation Mode - */ - LSM6DS0_ACC_DEC_t decimation; - /** - * @brief Accelerometer Output Data Rate - */ - LSM6DS0_ACC_ODR_t outputdatarate; - /** - * @brief Accelerometer Antialiasing filter Bandwidth Selection - */ - LSM6DS0_ACC_BW_t bandwidth; - /** - * @brief Accelerometer Full Scale - */ - LSM6DS0_ACC_FS_t fullscale; - /** - * @brief Accelerometer Axes Enabling - */ - LSM6DS0_ACC_AE_t axesenabling; - /** - * @brief Accelerometer High Resolution mode - */ - LSM6DS0_ACC_HR_t highresmode; - /** - * @brief HP filter for interrupt - */ - LSM6DS0_ACC_HPIS1_t hpfirq; - /** - * @brief LSM6DS0 Endianness - */ - LSM6DS0_END_t endianess; - /** - * @brief LSM6DS0 Block Data Update - */ - LSM6DS0_BDU_t blockdataupdate; -} LSM6DS0_ACC_Config; -/** @} */ - -/** - * @name Gyroscope data structures and types - * @{ - */ - -/** - * @brief Gyroscope Output Data Rate - */ -typedef enum { - LSM6DS0_GYRO_ODR_PD = 0x00, /*!< Power down */ - LSM6DS0_GYRO_ODR_14_9Hz_CO_5Hz = 0x20, /*!< Output Data Rate = 14.9 Hz, CutOff = 5Hz */ - LSM6DS0_GYRO_ODR_59_5Hz_CO_16Hz = 0x40, /*!< Output Data Rate = 59.5 Hz, CutOff = 16Hz */ - LSM6DS0_GYRO_ODR_119Hz_CO_14Hz = 0x60, /*!< Output Data Rate = 119 Hz, CutOff = 14Hz */ - LSM6DS0_GYRO_ODR_119Hz_CO_31Hz = 0x61, /*!< Output Data Rate = 119 Hz, CutOff = 31Hz */ - LSM6DS0_GYRO_ODR_238Hz_CO_14Hz = 0x80, /*!< Output Data Rate = 238 Hz, CutOff = 14Hz */ - LSM6DS0_GYRO_ODR_238Hz_CO_29Hz = 0x81, /*!< Output Data Rate = 328 Hz, CutOff = 29Hz */ - LSM6DS0_GYRO_ODR_238Hz_CO_63Hz = 0x82, /*!< Output Data Rate = 238 Hz, CutOff = 63Hz */ - LSM6DS0_GYRO_ODR_238Hz_CO_78Hz = 0x83, /*!< Output Data Rate = 476 Hz, CutOff = 78Hz */ - LSM6DS0_GYRO_ODR_476Hz_CO_21Hz = 0xA0, /*!< Output Data Rate = 476 Hz, CutOff = 21Hz */ - LSM6DS0_GYRO_ODR_476Hz_CO_28Hz = 0xA1, /*!< Output Data Rate = 238 Hz, CutOff = 28Hz */ - LSM6DS0_GYRO_ODR_476Hz_CO_57Hz = 0xA2, /*!< Output Data Rate = 476 Hz, CutOff = 57Hz */ - LSM6DS0_GYRO_ODR_476Hz_CO_100Hz = 0xA3, /*!< Output Data Rate = 476 Hz, CutOff = 100Hz */ - LSM6DS0_GYRO_ODR_952Hz_CO_33Hz = 0xC0, /*!< Output Data Rate = 952 Hz, CutOff = 33Hz */ - LSM6DS0_GYRO_ODR_952Hz_CO_40Hz = 0xC1, /*!< Output Data Rate = 952 Hz, CutOff = 40Hz */ - LSM6DS0_GYRO_ODR_952Hz_CO_58Hz = 0xC2, /*!< Output Data Rate = 952 Hz, CutOff = 58Hz */ - LSM6DS0_GYRO_ODR_952Hz_CO_100Hz = 0xC3 /*!< Output Data Rate = 952 Hz, CutOff = 100Hz */ -}LSM6DS0_GYRO_ODR_t; - -/** - * @brief Gyroscope Full Scale - */ -typedef enum { - LSM6DS0_GYRO_FS_245DSP = 0x00, /*!< ±245 degrees per second */ - LSM6DS0_GYRO_FS_500DSP = 0x08, /*!< ±500 degrees per second */ - LSM6DS0_GYRO_FS_2000DSP = 0x18 /*!< ±2000 degrees per second */ -}LSM6DS0_GYRO_FS_t; - -/** - * @brief Gyroscope Output Selection - */ -typedef enum { - LSM6DS0_GYRO_OUT_SEL_BYPASS = 0x00, /*!< Output not filtered */ - LSM6DS0_GYRO_OUT_SEL_FILTERED = 0x01, /*!< Output filtered */ -}LSM6DS0_GYRO_OUT_SEL_t; - -/** - * @brief Gyroscope Interrupt Selection - */ -typedef enum { - LSM6DS0_GYRO_INT_SEL_BYPASS = 0x00, /*!< Interrupt generator signal not filtered */ - LSM6DS0_GYRO_INT_SEL_FILTERED = 0x08, /*!< Interrupt generator signal filtered */ -}LSM6DS0_GYRO_INT_SEL_t; - -/** - * @brief Gyroscope Low Power Mode - */ -typedef enum { - LSM6DS0_GYRO_LP_MODE_HIGH_PERFORMANCE = 0x00, /*!< High performance */ - LSM6DS0_GYRO_LP_MODE_LOW_POWER = 0x80, /*!< Low power */ -}LSM6DS0_GYRO_LP_MODE_t; - -/** - * @brief Gyroscope High Pass Filter Cutoff Selection - */ -typedef enum { - LSM6DS0_GYRO_HPCF_DISABLED = 0x00, /*!< HP filter disabled */ - LSM6DS0_GYRO_HPCF_0 = 0x40, /*!< Config 0 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_1 = 0x41, /*!< Config 1 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_2 = 0x42, /*!< Config 2 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_3 = 0x43, /*!< Config 3 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_4 = 0x44, /*!< Config 4 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_5 = 0x45, /*!< Config 5 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_6 = 0x46, /*!< Config 6 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_7 = 0x47, /*!< Config 7 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_8 = 0x48, /*!< Config 8 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_9 = 0x49, /*!< Config 9 refer to table 48 of DOcID025604 Rev 3 */ - LSM6DS0_GYRO_HPCF_10 = 0x4A /*!< Config 10 refer to table 48 of DOcID025604 Rev 3 */ -}LSM6DS0_GYRO_HPCF_t; - -/** - * @brief Gyroscope Axes Enabling - */ -typedef enum{ - LSM6DS0_GYRO_AE_DISABLED = 0x00, /*!< Axes all disabled */ - LSM6DS0_GYRO_AE_X = 0x08, /*!< Only X-axis enabled */ - LSM6DS0_GYRO_AE_Y = 0x10, /*!< Only Y-axis enabled */ - LSM6DS0_GYRO_AE_XY = 0x18, /*!< X & Y axes enabled */ - LSM6DS0_GYRO_AE_Z = 0x20, /*!< Only Z-axis enabled */ - LSM6DS0_GYRO_AE_XZ = 0x28, /*!< X & Z axes enabled */ - LSM6DS0_GYRO_AE_YZ = 0x30, /*!< Y & Z axes enabled */ - LSM6DS0_GYRO_AE_XYZ = 0x38 /*!< All axes enabled */ -}LSM6DS0_GYRO_AE_t; - -/** - * @brief Gyroscope Decimation Mode - */ -typedef enum { - LSM6DS0_GYRO_DEC_DISABLED = 0x00, /*!< NO decimation */ - LSM6DS0_GYRO_DEC_X2 = 0x40, /*!< Decimation update every 2 sample */ - LSM6DS0_GYRO_DEC_X4 = 0x80, /*!< Decimation update every 4 sample */ - LSM6DS0_GYRO_DEC_X8 = 0xC0 /*!< Decimation update every 8 sample */ -}LSM6DS0_GYRO_DEC_t; - -/** - * @brief Gyroscope Sleep Mode - */ -typedef enum { - LSM6DS0_GYRO_SLP_DISABLED = 0x00, /*!< Gyroscope sleep mode disabled */ - LSM6DS0_GYRO_SLP_ENABLED = 0x40 /*!< Gyroscope sleep mode enabled */ -}LSM6DS0_GYRO_SLP_t; -/** - * @brief Gyroscope configuration structure. - */ -typedef struct { - /** - * @brief LSM6DS0 Slave Address - */ - LSM6DS0_SAD_t slaveaddress; - /** - * @brief Gyroscope Output Data Rate - */ - LSM6DS0_GYRO_ODR_t outputdatarate; - /** - * @brief Gyroscope Full Scale - */ - LSM6DS0_GYRO_FS_t fullscale; - /** - * @brief Gyroscope Output Selection - */ - LSM6DS0_GYRO_OUT_SEL_t outputselect; - /** - * @brief Gyroscope Interrupt Selection - */ - LSM6DS0_GYRO_INT_SEL_t irqselect; - /** - * @brief Gyroscope Low Power Mode - */ - LSM6DS0_GYRO_LP_MODE_t lowpowermode; - /** - * @brief Gyroscope High Pass Filter Cutoff Selection - */ - LSM6DS0_GYRO_HPCF_t HPCfrequency; - /** - * @brief Gyroscope Axes Enabling - */ - LSM6DS0_GYRO_AE_t axesenabling; - /** - * @brief Gyroscope Decimation Mode - */ - LSM6DS0_GYRO_DEC_t decimation; - /** - * @brief LSM6DS0 Endianness - */ - LSM6DS0_END_t endianess; - /** - * @brief LSM6DS0 Block Data Update - */ - LSM6DS0_BDU_t blockdataupdate; -} LSM6DS0_GYRO_Config; -/** @} */ -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - - uint8_t lsm6ds0ReadRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - msg_t* message); - void lsm6ds0WriteRegister(I2CDriver *i2cp, uint8_t sad, uint8_t sub, - uint8_t value, msg_t* message); -#ifdef __cplusplus -} -#endif - -#endif /* _LSM6DS0_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.c b/ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.c deleted file mode 100644 index 0e51167..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file max7219.c - * @brief MAX7219 display driver module code. - * - * @addtogroup max7219 - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#include "max7219.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Reads a generic register value. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] adr address number - * @param[in] data data value. - */ -void max7219WriteRegister(SPIDriver *spip, uint16_t adr, uint8_t data) { - - switch (adr) { - default: - return; - case MAX7219_AD_DIGIT_0: - case MAX7219_AD_DIGIT_1: - case MAX7219_AD_DIGIT_2: - case MAX7219_AD_DIGIT_3: - case MAX7219_AD_DIGIT_4: - case MAX7219_AD_DIGIT_5: - case MAX7219_AD_DIGIT_6: - case MAX7219_AD_DIGIT_7: - case MAX7219_AD_DECODE_MODE: - case MAX7219_AD_INTENSITY: - case MAX7219_AD_SCAN_LIMIT: - case MAX7219_AD_SHUTDOWN: - case MAX7219_AD_DISPLAY_TEST: - spiSelect(spip); - uint16_t txbuf = {adr | data}; - spiSend(spip, 1, &txbuf); - spiUnselect(spip); - } -} -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.h b/ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.h deleted file mode 100644 index e672be9..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/others/max7219.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file MAX7219.h - * @brief MAX7219 display driver module header. - * - * @{ - */ - -#ifndef _MAX7219_H_ -#define _MAX7219_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name MAX7219 register names - * @{ - */ -/******************************************************************************/ -/* */ -/* MAX7219 display driver */ -/* */ -/******************************************************************************/ -/******************* Bit definition for SPI communication *******************/ -#define MAX7219_DI ((uint16_t)0x00FF) /*!< DI[7:0] Data input */ -#define MAX7219_DI_0 ((uint16_t)0x0001) /*!< bit 0 */ -#define MAX7219_DI_1 ((uint16_t)0x0002) /*!< bit 1 */ -#define MAX7219_DI_2 ((uint16_t)0x0004) /*!< bit 2 */ -#define MAX7219_DI_3 ((uint16_t)0x0008) /*!< bit 3 */ -#define MAX7219_DI_4 ((uint16_t)0x0010) /*!< bit 4 */ -#define MAX7219_DI_5 ((uint16_t)0x0020) /*!< bit 5 */ -#define MAX7219_DI_6 ((uint16_t)0x0040) /*!< bit 6 */ -#define MAX7219_DI_7 ((uint16_t)0x0080) /*!< bit 7 */ - -#define MAX7219_AD ((uint16_t)0x0F00) /*!< AD[11:8] Data input */ -#define MAX7219_AD_0 ((uint16_t)0x0100) /*!< bit 8 */ -#define MAX7219_AD_1 ((uint16_t)0x0200) /*!< bit 9 */ -#define MAX7219_AD_2 ((uint16_t)0x0400) /*!< bit 10 */ -#define MAX7219_AD_3 ((uint16_t)0x0800) /*!< bit 11 */ - -/****************** Bit definition for Registers Addresses *******************/ -#define MAX7219_AD_NOP ((uint16_t)0x0000) /*!< No operation */ -#define MAX7219_AD_DIGIT_0 ((uint16_t)0x0100) /*!< Digit 0 */ -#define MAX7219_AD_DIGIT_1 ((uint16_t)0x0200) /*!< Digit 1 */ -#define MAX7219_AD_DIGIT_2 ((uint16_t)0x0300) /*!< Digit 2 */ -#define MAX7219_AD_DIGIT_3 ((uint16_t)0x0400) /*!< Digit 3 */ -#define MAX7219_AD_DIGIT_4 ((uint16_t)0x0500) /*!< Digit 4 */ -#define MAX7219_AD_DIGIT_5 ((uint16_t)0x0600) /*!< Digit 5 */ -#define MAX7219_AD_DIGIT_6 ((uint16_t)0x0700) /*!< Digit 6 */ -#define MAX7219_AD_DIGIT_7 ((uint16_t)0x0800) /*!< Digit 7 */ -#define MAX7219_AD_DECODE_MODE ((uint16_t)0x0900) /*!< Decode mode */ -#define MAX7219_AD_INTENSITY ((uint16_t)0x0A00) /*!< Intensity */ -#define MAX7219_AD_SCAN_LIMIT ((uint16_t)0x0B00) /*!< Scan limit */ -#define MAX7219_AD_SHUTDOWN ((uint16_t)0x0C00) /*!< Shutdown */ -#define MAX7219_AD_DISPLAY_TEST ((uint16_t)0x0F00) /*!< Display test */ - -/*************** Bit definition for Registers Configuration *****************/ -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !HAL_USE_SPI -#error "MAX7219 requires HAL_USE_SPI" -#endif -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @name MAX7219 data structures and types - * @{ - * - */ - -/** - * @brief MAX7219 operation mode - */ -typedef enum { - MAX7219_OM_Shutdown = 0x00, /*!< Shutdown mode */ - MAX7219_OM_Normal = 0x01 /*!< Normal mode */ -} MAX7219_OM_t; - -/** - * @brief MAX7219 decoder mode - */ -typedef enum { - MAX7219_DM_No_decode = 0x00, /*!< No decode */ - MAX7219_DM_CodeB_0 = 0x01, /*!< Code B on Digit 0 */ - MAX7219_DM_CodeB_1 = 0x03, /*!< Code B on Digits 0-1 */ - MAX7219_DM_CodeB_2 = 0x07, /*!< Code B on Digits from 0 to 2 */ - MAX7219_DM_CodeB_3 = 0x0F, /*!< Code B on Digits from 0 to 3 */ - MAX7219_DM_CodeB_4 = 0x1F, /*!< Code B on Digits from 0 to 4 */ - MAX7219_DM_CodeB_5 = 0x3F, /*!< Code B on Digits from 0 to 5 */ - MAX7219_DM_CodeB_6 = 0x7F, /*!< Code B on Digits from 0 to 6 */ - MAX7219_DM_CodeB_7 = 0xFF /*!< Code B on every digit */ -} MAX7219_DM_t; - -/** - * @brief MAX7219 intensity mode - */ -typedef enum { - MAX7219_IM_1_32 = 0x00, /*!< 1/32 intensity */ - MAX7219_IM_3_32 = 0x01, /*!< 3/32 intensity */ - MAX7219_IM_5_32 = 0x02, /*!< 5/32 intensity */ - MAX7219_IM_7_32 = 0x03, /*!< 7/32 intensity */ - MAX7219_IM_9_32 = 0x04, /*!< 9/32 intensity */ - MAX7219_IM_11_32 = 0x05, /*!< 11/32 intensity */ - MAX7219_IM_13_32 = 0x06, /*!< 13/32 intensity */ - MAX7219_IM_15_32 = 0x07, /*!< 15/32 intensity */ - MAX7219_IM_17_32 = 0x08, /*!< 17/32 intensity */ - MAX7219_IM_19_32 = 0x09, /*!< 19/32 intensity */ - MAX7219_IM_21_32 = 0x0A, /*!< 21/32 intensity */ - MAX7219_IM_23_32 = 0x0B, /*!< 23/32 intensity */ - MAX7219_IM_25_32 = 0x0C, /*!< 25/32 intensity */ - MAX7219_IM_27_32 = 0x0D, /*!< 27/32 intensity */ - MAX7219_IM_29_32 = 0x0E, /*!< 29/32 intensity */ - MAX7219_IM_31_32 = 0x0F /*!< 31/32 intensity */ -} MAX7219_IM_t; - -/** - * @brief MAX7219 scan line mode - */ -typedef enum { - MAX7219_SL_0 = 0x00, /*!< Scanned digit 0 only */ - MAX7219_SL_1 = 0x01, /*!< Scanned digit 0 & 1 */ - MAX7219_SL_2 = 0x02, /*!< Scanned digit 0 - 2 */ - MAX7219_SL_3 = 0x03, /*!< Scanned digit 0 - 3 */ - MAX7219_SL_4 = 0x04, /*!< Scanned digit 0 - 4 */ - MAX7219_SL_5 = 0x05, /*!< Scanned digit 0 - 5 */ - MAX7219_SL_6 = 0x06, /*!< Scanned digit 0 - 6 */ - MAX7219_SL_7 = 0x07 /*!< Scanned digit 0 - 7 */ -} MAX7219_SL_t; -/** @} */ -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - - void max7219WriteRegister(SPIDriver *spip, uint16_t adr, uint8_t data); -#ifdef __cplusplus -} -#endif -#endif /* _MAX7219_H_ */ - -/** @} */ - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.c b/ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.c deleted file mode 100644 index f526fbe..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file nrf24l01.c - * @brief NRF24L01 interface module code. - * - * @addtogroup nrf24l01 - * @{ - */ - -#include "ch.h" -#include "hal.h" - -#include "nrf24l01.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define ACTIVATE 0x73 -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Gets the status register value. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01GetStatus(SPIDriver *spip) { - uint8_t txbuf = NRF24L01_CMD_NOP; - uint8_t status; - spiSelect(spip); - spiExchange(spip, 1, &txbuf, &status); - spiUnselect(spip); - return status; -} - -/** - * @brief Reads a generic register value. - * - * @note Cannot be used to set addresses - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] reg register number - * @param[out] pvalue pointer to a data buffer - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01ReadRegister(SPIDriver *spip, uint8_t reg, - uint8_t* pvalue) { - uint8_t txbuf = (NRF24L01_CMD_READ | reg); - uint8_t status = 0xFF; - spiSelect(spip); - spiExchange(spip, 1, &txbuf, &status); - spiReceive(spip, 1, pvalue); - spiUnselect(spip); - return status; -} - -/** - * @brief Writes a generic register value. - * - * @note Cannot be used to set addresses - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] reg register number - * @param[in] value data value - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01WriteRegister(SPIDriver *spip, uint8_t reg, - uint8_t value) { - - uint8_t txbuf[2] = {(NRF24L01_CMD_WRITE | reg), value}; - uint8_t rxbuf[2] = {0xFF, 0xFF}; - switch (reg) { - - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "lg3d20WriteRegister(), reserved register"); - case NRF24L01_AD_OBSERVE_TX: - case NRF24L01_AD_CD: - case NRF24L01_AD_RX_ADDR_P0: - case NRF24L01_AD_RX_ADDR_P1: - case NRF24L01_AD_RX_ADDR_P2: - case NRF24L01_AD_RX_ADDR_P3: - case NRF24L01_AD_RX_ADDR_P4: - case NRF24L01_AD_RX_ADDR_P5: - case NRF24L01_AD_TX_ADDR: - /* Read only or addresses registers cannot be written, - * the command is ignored. - */ - return 0; - case NRF24L01_AD_CONFIG: - case NRF24L01_AD_EN_AA: - case NRF24L01_AD_EN_RXADDR: - case NRF24L01_AD_SETUP_AW: - case NRF24L01_AD_SETUP_RETR: - case NRF24L01_AD_RF_CH: - case NRF24L01_AD_RF_SETUP: - case NRF24L01_AD_STATUS: - case NRF24L01_AD_RX_PW_P0: - case NRF24L01_AD_RX_PW_P1: - case NRF24L01_AD_RX_PW_P2: - case NRF24L01_AD_RX_PW_P3: - case NRF24L01_AD_RX_PW_P4: - case NRF24L01_AD_RX_PW_P5: - case NRF24L01_AD_FIFO_STATUS: - case NRF24L01_AD_DYNPD: - case NRF24L01_AD_FEATURE: - spiSelect(spip); - spiExchange(spip, 2, txbuf, rxbuf); - spiUnselect(spip); - return rxbuf[0]; - } -} - - -/** - * @brief Writes an address. - * - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] reg register number - * @param[in] pvalue pointer to address value - * @param[in] addlen address len - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01WriteAddress(SPIDriver *spip, uint8_t reg, - uint8_t *pvalue, uint8_t addlen) { - - uint8_t txbuf[NRF24L01_MAX_ADD_LENGHT + 1]; - uint8_t rxbuf[NRF24L01_MAX_ADD_LENGHT + 1]; - unsigned i; - - if(addlen > NRF24L01_MAX_ADD_LENGHT) { - chDbgAssert(FALSE, "nrf24l01WriteAddress(), wrong address length"); - return 0; - } - txbuf[0] = (NRF24L01_CMD_WRITE | reg); - rxbuf[0] = 0xFF; - for(i = 1; i <= addlen; i++) { - txbuf[i] = *(pvalue + (i - 1)); - rxbuf[i] = 0xFF; - } - switch (reg) { - - default: - /* Reserved register must not be written, according to the datasheet - * this could permanently damage the device. - */ - chDbgAssert(FALSE, "nrf24l01WriteAddress(), reserved register"); - case NRF24L01_AD_OBSERVE_TX: - case NRF24L01_AD_CD: - case NRF24L01_AD_CONFIG: - case NRF24L01_AD_EN_AA: - case NRF24L01_AD_EN_RXADDR: - case NRF24L01_AD_SETUP_AW: - case NRF24L01_AD_SETUP_RETR: - case NRF24L01_AD_RF_CH: - case NRF24L01_AD_RF_SETUP: - case NRF24L01_AD_STATUS: - case NRF24L01_AD_RX_PW_P0: - case NRF24L01_AD_RX_PW_P1: - case NRF24L01_AD_RX_PW_P2: - case NRF24L01_AD_RX_PW_P3: - case NRF24L01_AD_RX_PW_P4: - case NRF24L01_AD_RX_PW_P5: - case NRF24L01_AD_FIFO_STATUS: - case NRF24L01_AD_DYNPD: - case NRF24L01_AD_FEATURE: - /* Not address registers cannot be written, the command is ignored.*/ - return 0; - case NRF24L01_AD_RX_ADDR_P0: - case NRF24L01_AD_RX_ADDR_P1: - case NRF24L01_AD_RX_ADDR_P2: - case NRF24L01_AD_RX_ADDR_P3: - case NRF24L01_AD_RX_ADDR_P4: - case NRF24L01_AD_RX_ADDR_P5: - case NRF24L01_AD_TX_ADDR: - spiSelect(spip); - spiExchange(spip, addlen + 1, txbuf, rxbuf); - spiUnselect(spip); - return rxbuf[0]; - } -} -/** - * @brief Reads RX payload from FIFO. - * - * @note Payload is deleted from FIFO after it is read. Used in RX mode. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] paylen payload length - * @param[in] rxbuf pointer to a buffer - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01GetRxPl(SPIDriver *spip, uint8_t paylen, - uint8_t* rxbuf) { - - uint8_t txbuf = NRF24L01_CMD_R_RX_PAYLOAD; - uint8_t status; - if(paylen > NRF24L01_MAX_PL_LENGHT) { - return 0; - } - spiSelect(spip); - spiExchange(spip, 1, &txbuf, &status); - spiReceive(spip, paylen, rxbuf); - spiUnselect(spip); - return status; -} - -/** - * @brief Writes TX payload on FIFO. - * - * @note Used in TX mode. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] paylen payload length - * @param[in] rxbuf pointer to a buffer - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01WriteTxPl(SPIDriver *spip, uint8_t paylen, - uint8_t* txbuf) { - - uint8_t cmd = NRF24L01_CMD_W_TX_PAYLOAD; - uint8_t status; - if(paylen > NRF24L01_MAX_PL_LENGHT) { - return 0; - } - spiSelect(spip); - spiExchange(spip, 1, &cmd, &status); - spiSend(spip, paylen, txbuf); - spiUnselect(spip); - return status; -} - -/** - * @brief Flush TX FIFO. - * - * @note Used in TX mode. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01FlushTx(SPIDriver *spip) { - - uint8_t txbuf = NRF24L01_CMD_FLUSH_TX; - uint8_t status; - spiSelect(spip); - spiExchange(spip, 1, &txbuf, &status); - spiUnselect(spip); - return status; -} - -/** - * @brief Flush RX FIFO. - * - * @note Used in RX mode. Should not be executed during transmission of - acknowledge, that is, acknowledge package will not be completed. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01FlushRx(SPIDriver *spip) { - - uint8_t txbuf = NRF24L01_CMD_FLUSH_RX; - uint8_t status; - spiSelect(spip); - spiExchange(spip, 1, &txbuf, &status); - spiUnselect(spip); - return status; -} - -#if NRF24L01_USE_FEATURE || defined(__DOXYGEN__) -/** - * @brief Activates the following features: - * R_RX_PL_WID -> (In order to enable DPL the EN_DPL bit in the - * FEATURE register must be set) - * W_ACK_PAYLOAD -> (In order to enable PL with ACK the EN_ACK_PAY - * bit in the FEATURE register must be set) - * W_TX_PAYLOAD_NOACK -> (In order to send a PL without ACK - * the EN_DYN_ACK it in the FEATURE register - * must be set) - * - * @note A new ACTIVATE command with the same data deactivates them again. - * This is executable in power down or stand by modes only. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01Activate(SPIDriver *spip) { - - uint8_t txbuf[2] = {NRF24L01_CMD_FLUSH_RX, ACTIVATE}; - uint8_t rxbuf[2]; - spiSelect(spip); - spiExchange(spip, 2, txbuf, rxbuf); - spiUnselect(spip); - return rxbuf[0]; -} - -/** - * @brief Reads RX payload lenght for the top R_RX_PAYLOAD - * in the RX FIFO when Dynamic Payload Length is activated. - * - * @note R_RX_PL_WID must be set and activated. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] ppaylen pointer to the payload length variable - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01ReadRxPlWid(SPIDriver *spip, uint8_t *ppaylen) { - - uint8_t txbuf[2] = {NRF24L01_CMD_R_RX_PL_WID, 0xFF}; - uint8_t rxbuf[2]; - spiSelect(spip); - spiExchange(spip, 2, txbuf, rxbuf); - spiUnselect(spip); - *ppaylen = rxbuf[1]; - return rxbuf[0]; -} - -/** - * @brief Writes TX payload associateted to ACK. - * - * @note Used in RX mode. Write Payload to be transmitted together with - * ACK packet on PIPE PPP. (PPP valid in the range from 000 to 101). - * @note EN_ACK_PAY must be set and activated. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] paylen payload length - * @param[in] rxbuf pointer to a buffer - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01WriteAckPl(SPIDriver *spip, uint8_t ppp, uint8_t paylen, - uint8_t* payload){ - - payload[0] = NRF24L01_CMD_W_ACK_PAYLOAD | NRF24L01_MAX_PPP; - uint8_t status; - if((paylen > NRF24L01_MAX_PL_LENGHT) || (ppp > NRF24L01_MAX_PPP)) { - return 0; - } - spiSelect(spip); - spiExchange(spip, 1, payload, &status); - spiSend(spip, paylen, payload); - spiUnselect(spip); - return status; -} - -/** - * @brief Writes next TX payload without ACK. - * - * @note Used in TX mode. - * @note EN_DYN_ACK must be set and activated. - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * @param[in] paylen payload length - * @param[in] rxbuf pointer to a buffer - * - * @return the status register value - */ -NRF24L01_status_t nrf24l01WriteTxPlNoAck(SPIDriver *spip, uint8_t paylen, - uint8_t* txbuf) { - - txbuf[0] = NRF24L01_CMD_W_TX_PAYLOAD_NOACK; - uint8_t status; - if(paylen > NRF24L01_MAX_PL_LENGHT) { - return 0; - } - spiSelect(spip); - spiExchange(spip, 1, txbuf, &status); - spiSend(spip, paylen, txbuf); - spiUnselect(spip); - return status; -} -#endif /* NRF24L01_USE_FEATURE */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.h b/ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.h deleted file mode 100644 index 86ba127..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/rf/nrf24l01.h +++ /dev/null @@ -1,575 +0,0 @@ -/* - Pretty LAYer for ChibiOS/RT - Copyright (C) 2015 Rocco Marco Guglielmi - - This file is part of PLAY for ChibiOS/RT. - - PLAY is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - PLAY is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - Special thanks to Giovanni Di Sirio for teachings, his moral support and - friendship. Note that some or every piece of this file could be part of - the ChibiOS project that is intellectual property of Giovanni Di Sirio. - Please refer to ChibiOS/RT license before use this file. - - For suggestion or Bug report - roccomarco.guglielmi@playembedded.org - */ - -/** - * @file nrf24l01.h - * @brief NRF24L01 Radio frequency module interface module header. - * - * @{ - */ - -#ifndef _NRF24L01_H_ -#define _NRF24L01_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define NRF24L01_MAX_ADD_LENGHT ((uint8_t) 5) -#define NRF24L01_MAX_PL_LENGHT ((uint8_t) 32) -#define NRF24L01_MAX_PPP ((uint8_t) 5) - -/** - * @brief Enables Advanced Features. - */ -#if !defined(NRF24L01_USE_FEATURE) || defined(__DOXYGEN__) -#define NRF24L01_USE_FEATURE TRUE -#endif - -/** - * @name NRF24L01 register names - * @{ - */ -/******************************************************************************/ -/* */ -/* NRF24L01 RF Transceiver */ -/* */ -/******************************************************************************/ -/****************** Bit definition for SPI communication ********************/ -#define NRF24L01_DI ((uint8_t)0xFF) /*!< DI[7:0] Data input */ -#define NRF24L01_DI_0 ((uint8_t)0x01) /*!< bit 0 */ -#define NRF24L01_DI_1 ((uint8_t)0x02) /*!< bit 1 */ -#define NRF24L01_DI_2 ((uint8_t)0x04) /*!< bit 2 */ -#define NRF24L01_DI_3 ((uint8_t)0x08) /*!< bit 3 */ -#define NRF24L01_DI_4 ((uint8_t)0x10) /*!< bit 4 */ -#define NRF24L01_DI_5 ((uint8_t)0x20) /*!< bit 5 */ -#define NRF24L01_DI_6 ((uint8_t)0x40) /*!< bit 6 */ -#define NRF24L01_DI_7 ((uint8_t)0x80) /*!< bit 7 */ - -#define NRF24L01_AD ((uint8_t)0x1F) /*!< AD[4:0] Address Data */ -#define NRF24L01_AD_0 ((uint8_t)0x01) /*!< bit 0 */ -#define NRF24L01_AD_1 ((uint8_t)0x02) /*!< bit 1 */ -#define NRF24L01_AD_2 ((uint8_t)0x04) /*!< bit 2 */ -#define NRF24L01_AD_3 ((uint8_t)0x08) /*!< bit 3 */ -#define NRF24L01_AD_4 ((uint8_t)0x10) /*!< bit 4 */ - -#define NRF24L01_CMD_READ ((uint8_t)0x00) /*!< Read command */ -#define NRF24L01_CMD_WRITE ((uint8_t)0x20) /*!< Write command */ -#define NRF24L01_CMD_R_RX_PAYLOAD ((uint8_t)0x61) /*!< Read RX-payload*/ -#define NRF24L01_CMD_W_TX_PAYLOAD ((uint8_t)0xA0) /*!< Write TX-payload */ -#define NRF24L01_CMD_FLUSH_TX ((uint8_t)0xE1) /*!< Flush TX FIFO */ -#define NRF24L01_CMD_FLUSH_RX ((uint8_t)0xE2) /*!< Flush RX FIFO */ -#define NRF24L01_CMD_REUSE_TX_PL ((uint8_t)0xE3) /*!< Used for a PTX device */ -#define NRF24L01_CMD_ACTIVATE ((uint8_t)0x50) /*!< Activate command */ -#define NRF24L01_CMD_R_RX_PL_WID ((uint8_t)0x60) /*!< Read RX-payload width */ -#define NRF24L01_CMD_W_ACK_PAYLOAD ((uint8_t)0xA8) /*!< Write Payload for ACK */ -#define NRF24L01_CMD_W_TX_PAYLOAD_NOACK ((uint8_t)0xB0) /*!< Disables AUTOACK*/ -#define NRF24L01_CMD_NOP ((uint8_t)0xFF) /*!< No Operation */ - -/****************** Bit definition for Registers Addresses *******************/ -#define NRF24L01_AD_CONFIG ((uint8_t)0x00) /*!< Configuration Register */ -#define NRF24L01_AD_EN_AA ((uint8_t)0x01) /*!< Enable ‘Auto Acknowledgment’ */ -#define NRF24L01_AD_EN_RXADDR ((uint8_t)0x02) /*!< Enabled RX Addresses */ -#define NRF24L01_AD_SETUP_AW ((uint8_t)0x03) /*!< Setup of Address Widths */ -#define NRF24L01_AD_SETUP_RETR ((uint8_t)0x04) /*!< Setup of Automatic Retransmission */ -#define NRF24L01_AD_RF_CH ((uint8_t)0x05) /*!< RF Channel */ -#define NRF24L01_AD_RF_SETUP ((uint8_t)0x06) /*!< RF Setup Register */ -#define NRF24L01_AD_STATUS ((uint8_t)0x07) /*!< Status Register */ -#define NRF24L01_AD_OBSERVE_TX ((uint8_t)0x08) /*!< Transmit observe register */ -#define NRF24L01_AD_CD ((uint8_t)0x09) /*!< CD */ -#define NRF24L01_AD_RX_ADDR_P0 ((uint8_t)0x0A) /*!< Receive address data pipe 0 */ -#define NRF24L01_AD_RX_ADDR_P1 ((uint8_t)0x0B) /*!< Receive address data pipe 1 */ -#define NRF24L01_AD_RX_ADDR_P2 ((uint8_t)0x0C) /*!< Receive address data pipe 2 */ -#define NRF24L01_AD_RX_ADDR_P3 ((uint8_t)0x0D) /*!< Receive address data pipe 3 */ -#define NRF24L01_AD_RX_ADDR_P4 ((uint8_t)0x0E) /*!< Receive address data pipe 4 */ -#define NRF24L01_AD_RX_ADDR_P5 ((uint8_t)0x0F) /*!< Receive address data pipe 5 */ -#define NRF24L01_AD_TX_ADDR ((uint8_t)0x10) /*!< Transmit address */ -#define NRF24L01_AD_RX_PW_P0 ((uint8_t)0x11) /*!< Number of bytes in RX payload in data pipe 0 */ -#define NRF24L01_AD_RX_PW_P1 ((uint8_t)0x12) /*!< Number of bytes in RX payload in data pipe 1 */ -#define NRF24L01_AD_RX_PW_P2 ((uint8_t)0x13) /*!< Number of bytes in RX payload in data pipe 2 */ -#define NRF24L01_AD_RX_PW_P3 ((uint8_t)0x14) /*!< Number of bytes in RX payload in data pipe 3 */ -#define NRF24L01_AD_RX_PW_P4 ((uint8_t)0x15) /*!< Number of bytes in RX payload in data pipe 4 */ -#define NRF24L01_AD_RX_PW_P5 ((uint8_t)0x16) /*!< Number of bytes in RX payload in data pipe 5 */ -#define NRF24L01_AD_FIFO_STATUS ((uint8_t)0x17) /*!< FIFO Status Register */ -#define NRF24L01_AD_DYNPD ((uint8_t)0x1C) /*!< Enable dynamic payload length */ -#define NRF24L01_AD_FEATURE ((uint8_t)0x1D) /*!< Feature Register */ - -/*************** Bit definition for Registers Configuration *****************/ -#define NRF24L01_DI_CONFIG ((uint8_t)0x7F) /*!< CONTROL REGISTER BIT MASK*/ -#define NRF24L01_DI_CONFIG_PRIM_RX ((uint8_t)0x01) /*!< RX/TX control - 1: PRX, 0: PTX */ -#define NRF24L01_DI_CONFIG_PWR_UP ((uint8_t)0x02) /*!< 1: POWER UP, 0:POWER DOWN */ -#define NRF24L01_DI_CONFIG_CRCO ((uint8_t)0x04) /*!< CRC encoding scheme - 1:two bytes, 0:one byte */ -#define NRF24L01_DI_CONFIG_EN_CRC ((uint8_t)0x08) /*!< Enable CRC. Forced high if one of the bits in the EN_AA is high */ -#define NRF24L01_DI_CONFIG_MASK_MAX_RT ((uint8_t)0x10) /*!< Mask interrupt caused by MAX_RT - 1: Interrupt disabled, 0: Interrupt reflected on IRQ pin */ -#define NRF24L01_DI_CONFIG_MASK_TX_DS ((uint8_t)0x20) /*!< Mask interrupt caused by TX_DS - 1: Interrupt disabled, 0: Interrupt reflected on IRQ pin */ -#define NRF24L01_DI_CONFIG_MASK_RX_DR ((uint8_t)0x40) /*!< Mask interrupt caused by RX_DR - 1: Interrupt disabled, 0: Interrupt reflected on IRQ pin */ - -#define NRF24L01_DI_EN_AA ((uint8_t)0x3F) /*!< ENABLE AUTO ACKNOLEDGMENT REGISTER BIT MASK */ -#define NRF24L01_DI_EN_AA_P0 ((uint8_t)0x01) /*!< Enable auto acknowledgement data pipe 0 */ -#define NRF24L01_DI_EN_AA_P1 ((uint8_t)0x02) /*!< Enable auto acknowledgement data pipe 1 */ -#define NRF24L01_DI_EN_AA_P2 ((uint8_t)0x04) /*!< Enable auto acknowledgement data pipe 2 */ -#define NRF24L01_DI_EN_AA_P3 ((uint8_t)0x08) /*!< Enable auto acknowledgement data pipe 3 */ -#define NRF24L01_DI_EN_AA_P4 ((uint8_t)0x10) /*!< Enable auto acknowledgement data pipe 4 */ -#define NRF24L01_DI_EN_AA_P5 ((uint8_t)0x20) /*!< Enable auto acknowledgement data pipe 5 */ - -#define NRF24L01_DI_EN_RXADDR ((uint8_t)0x3F) /*!< ENABLE RX ADDRESSES REGISTER BIT MASK */ -#define NRF24L01_DI_EN_RXADDR_P0 ((uint8_t)0x01) /*!< Enable data pipe 0 */ -#define NRF24L01_DI_EN_RXADDR_P1 ((uint8_t)0x02) /*!< Enable data pipe 1 */ -#define NRF24L01_DI_EN_RXADDR_P2 ((uint8_t)0x04) /*!< Enable data pipe 2 */ -#define NRF24L01_DI_EN_RXADDR_P3 ((uint8_t)0x08) /*!< Enable data pipe 3 */ -#define NRF24L01_DI_EN_RXADDR_P4 ((uint8_t)0x10) /*!< Enable data pipe 4 */ -#define NRF24L01_DI_EN_RXADDR_P5 ((uint8_t)0x20) /*!< Enable data pipe 5 */ - -#define NRF24L01_DI_SETUP_AW ((uint8_t)0x03) /*!< SETUP OF ADDRESSES WIDTHS REGISTER BIT MASK */ -#define NRF24L01_DI_SETUP_AW_0 ((uint8_t)0x01) /*!< Addressed widths bit 0 */ -#define NRF24L01_DI_SETUP_AW_1 ((uint8_t)0x02) /*!< Addressed widths bit 1 */ - -#define NRF24L01_DI_SETUP_RETR ((uint8_t)0xFF) /*!< SETUP OF AUTOMATIC RETRANSMISSION REGISTER BIT MASK */ -#define NRF24L01_DI_SETUP_RETR_ARC_0 ((uint8_t)0x01) /*!< Auto Retransmit Count bit 0 */ -#define NRF24L01_DI_SETUP_RETR_ARC_1 ((uint8_t)0x02) /*!< Auto Retransmit Count bit 1 */ -#define NRF24L01_DI_SETUP_RETR_ARC_2 ((uint8_t)0x04) /*!< Auto Retransmit Count bit 2 */ -#define NRF24L01_DI_SETUP_RETR_ARC_3 ((uint8_t)0x08) /*!< Auto Retransmit Count bit 3 */ -#define NRF24L01_DI_SETUP_RETR_ARD_0 ((uint8_t)0x10) /*!< Auto Retransmit Delay bit 0 */ -#define NRF24L01_DI_SETUP_RETR_ARD_1 ((uint8_t)0x20) /*!< Auto Retransmit Delay bit 1 */ -#define NRF24L01_DI_SETUP_RETR_ARD_2 ((uint8_t)0x40) /*!< Auto Retransmit Delay bit 2 */ -#define NRF24L01_DI_SETUP_RETR_ARD_3 ((uint8_t)0x80) /*!< Auto Retransmit Delay bit 3 */ - - -#define NRF24L01_DI_RF_CH ((uint8_t)0x7F) /*!< RF CHANNEL REGISTER BIT MASK */ -#define NRF24L01_DI_RF_CH_0 ((uint8_t)0x01) /*!< RF channel bit 0 */ -#define NRF24L01_DI_RF_CH_1 ((uint8_t)0x02) /*!< RF channel bit 1 */ -#define NRF24L01_DI_RF_CH_2 ((uint8_t)0x04) /*!< RF channel bit 2 */ -#define NRF24L01_DI_RF_CH_3 ((uint8_t)0x08) /*!< RF channel bit 3 */ -#define NRF24L01_DI_RF_CH_4 ((uint8_t)0x10) /*!< RF channel bit 4 */ -#define NRF24L01_DI_RF_CH_5 ((uint8_t)0x20) /*!< RF channel bit 5 */ -#define NRF24L01_DI_RF_CH_6 ((uint8_t)0x40) /*!< RF channel bit 6 */ - - -#define NRF24L01_DI_RF_SETUP ((uint8_t)0x1F) /*!< RF SETUP REGISTER BIT MASK */ -#define NRF24L01_DI_RF_SETUP_LNA_HCURR ((uint8_t)0x01) /*!< Setup LNA gain */ -#define NRF24L01_DI_RF_SETUP_RF_PWR_0 ((uint8_t)0x02) /*!< RF output power bit 0 */ -#define NRF24L01_DI_RF_SETUP_RF_PWR_1 ((uint8_t)0x04) /*!< RF output power bit 1 */ -#define NRF24L01_DI_RF_SETUP_RF_DR ((uint8_t)0x08) /*!< Air Data rate - 0: 1Mbps, 1: 2Mbps */ -#define NRF24L01_DI_RF_SETUP_PLL_LOCK ((uint8_t)0x10) /*!< Force PLL lock signal */ - -#define NRF24L01_DI_STATUS ((uint8_t)0x7F) /*!< STATUS REGISTER BIT MASK */ -#define NRF24L01_DI_STATUS_TX_FULL ((uint8_t)0x01) /*!< TX FIFO full flag - 0: Available locations, 1: Full */ -#define NRF24L01_DI_STATUS_RX_P_NO_0 ((uint8_t)0x02) /*!< RX payload number bit 0 */ -#define NRF24L01_DI_STATUS_RX_P_NO_1 ((uint8_t)0x04) /*!< RX payload number bit 1 */ -#define NRF24L01_DI_STATUS_RX_P_NO_2 ((uint8_t)0x08) /*!< RX payload number bit 2 */ -#define NRF24L01_DI_STATUS_MAX_RT ((uint8_t)0x10) /*!< Maximum number of TX retransmits interrupt */ -#define NRF24L01_DI_STATUS_TX_DS ((uint8_t)0x20) /*!< Data Sent TX FIFO interrupt */ -#define NRF24L01_DI_STATUS_RX_DR ((uint8_t)0x40) /*!< Data Ready RX FIFO interrupt */ - -#define NRF24L01_DI_OBSERVE_TX ((uint8_t)0xFF) /*!< TRANSMIT OBSERVE REGISTER BIT MASK */ -#define NRF24L01_DI_ARC_CNT_0 ((uint8_t)0x01) /*!< Count retransmitted packets bit 0 */ -#define NRF24L01_DI_ARC_CNT_1 ((uint8_t)0x02) /*!< Count retransmitted packets bit 1 */ -#define NRF24L01_DI_ARC_CNT_2 ((uint8_t)0x04) /*!< Count retransmitted packets bit 2 */ -#define NRF24L01_DI_ARC_CNT_3 ((uint8_t)0x08) /*!< Count retransmitted packets bit 3 */ -#define NRF24L01_DI_PLOS_CNT_0 ((uint8_t)0x10) /*!< Count lost packets bit 0 */ -#define NRF24L01_DI_PLOS_CNT_1 ((uint8_t)0x20) /*!< Count lost packets bit 1 */ -#define NRF24L01_DI_PLOS_CNT_2 ((uint8_t)0x40) /*!< Count lost packets bit 2 */ -#define NRF24L01_DI_PLOS_CNT_3 ((uint8_t)0x80) /*!< Count lost packets bit 3 */ - -#define NRF24L01_DI_CD ((uint8_t)0x01) /*!< REGISTER BIT MASK */ -#define NRF24L01_DI_CARRIER_DETECT ((uint8_t)0x01) /*!< Carrier detect */ - -#define NRF24L01_DI_RX_PW_P0 ((uint8_t)0x3F) /*!< RX PAYLOAD WIDTH FOR PIPE 0 REGISTER BIT MASK */ -#define NRF24L01_DI_RX_PW_P0_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define NRF24L01_DI_RX_PW_P0_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define NRF24L01_DI_RX_PW_P0_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define NRF24L01_DI_RX_PW_P0_3 ((uint8_t)0x08) /*!< Bit 3 */ -#define NRF24L01_DI_RX_PW_P0_4 ((uint8_t)0x10) /*!< Bit 4 */ -#define NRF24L01_DI_RX_PW_P0_5 ((uint8_t)0x20) /*!< Bit 5 */ - -#define NRF24L01_DI_RX_PW_P1 ((uint8_t)0x3F) /*!< RX PAYLOAD WIDTH FOR PIPE 1 REGISTER BIT MASK */ -#define NRF24L01_DI_RX_PW_P1_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define NRF24L01_DI_RX_PW_P1_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define NRF24L01_DI_RX_PW_P1_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define NRF24L01_DI_RX_PW_P1_3 ((uint8_t)0x08) /*!< Bit 3 */ -#define NRF24L01_DI_RX_PW_P1_4 ((uint8_t)0x10) /*!< Bit 4 */ -#define NRF24L01_DI_RX_PW_P1_5 ((uint8_t)0x20) /*!< Bit 5 */ - -#define NRF24L01_DI_RX_PW_P2 ((uint8_t)0x3F) /*!< RX PAYLOAD WIDTH FOR PIPE 2 REGISTER BIT MASK */ -#define NRF24L01_DI_RX_PW_P2_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define NRF24L01_DI_RX_PW_P2_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define NRF24L01_DI_RX_PW_P2_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define NRF24L01_DI_RX_PW_P2_3 ((uint8_t)0x08) /*!< Bit 3 */ -#define NRF24L01_DI_RX_PW_P2_4 ((uint8_t)0x10) /*!< Bit 4 */ -#define NRF24L01_DI_RX_PW_P2_5 ((uint8_t)0x20) /*!< Bit 5 */ - -#define NRF24L01_DI_RX_PW_P3 ((uint8_t)0x3F) /*!< RX PAYLOAD WIDTH FOR PIPE 3 REGISTER BIT MASK */ -#define NRF24L01_DI_RX_PW_P3_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define NRF24L01_DI_RX_PW_P3_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define NRF24L01_DI_RX_PW_P3_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define NRF24L01_DI_RX_PW_P3_3 ((uint8_t)0x08) /*!< Bit 3 */ -#define NRF24L01_DI_RX_PW_P3_4 ((uint8_t)0x10) /*!< Bit 4 */ -#define NRF24L01_DI_RX_PW_P3_5 ((uint8_t)0x20) /*!< Bit 5 */ - -#define NRF24L01_DI_RX_PW_P4 ((uint8_t)0x3F) /*!< RX PAYLOAD WIDTH FOR PIPE 4 REGISTER BIT MASK */ -#define NRF24L01_DI_RX_PW_P4_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define NRF24L01_DI_RX_PW_P4_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define NRF24L01_DI_RX_PW_P4_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define NRF24L01_DI_RX_PW_P4_3 ((uint8_t)0x08) /*!< Bit 3 */ -#define NRF24L01_DI_RX_PW_P4_4 ((uint8_t)0x10) /*!< Bit 4 */ -#define NRF24L01_DI_RX_PW_P4_5 ((uint8_t)0x20) /*!< Bit 5 */ - -#define NRF24L01_DI_RX_PW_P5 ((uint8_t)0x3F) /*!< RX PAYLOAD WIDTH FOR PIPE 5 REGISTER BIT MASK */ -#define NRF24L01_DI_RX_PW_P5_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define NRF24L01_DI_RX_PW_P5_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define NRF24L01_DI_RX_PW_P5_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define NRF24L01_DI_RX_PW_P5_3 ((uint8_t)0x08) /*!< Bit 3 */ -#define NRF24L01_DI_RX_PW_P5_4 ((uint8_t)0x10) /*!< Bit 4 */ -#define NRF24L01_DI_RX_PW_P5_5 ((uint8_t)0x20) /*!< Bit 5 */ - -#define NRF24L01_DI_FIFO_STATUS ((uint8_t)0x73) /*!< FIFO STATUS REGISTER BIT MASK*/ -#define NRF24L01_DI_FIFO_STATUS_RX_EMPTY ((uint8_t)0x01) /*!< RX FIFO empty flag - 0:Data in RX FIFO, 1:RX FIFO empty */ -#define NRF24L01_DI_FIFO_STATUS_RX_FULL ((uint8_t)0x02) /*!< RX FIFO full flag - 0:Available locations in RX FIFO, 1:RX FIFO empty */ -#define NRF24L01_DI_FIFO_STATUS_TX_EMPTY ((uint8_t)0x10) /*!< TX FIFO empty flag - 0:Data in TX FIFO, 1:TX FIFO empty */ -#define NRF24L01_DI_FIFO_STATUS_TX_FULL ((uint8_t)0x20) /*!< TX FIFO full flag - 0:Available locations in TX FIFO, 1:TX FIFO empty */ -#define NRF24L01_DI_FIFO_STATUS_TX_REUSE ((uint8_t)0x40) /*!< Reuse last transmitted data packet if set high */ - -#define NRF24L01_DI_DYNPD ((uint8_t)0x3F) /*!< ENABLE DYNAMIC PAYLOAD LENGHT REGISTER BIT MASK */ -#define NRF24L01_DI_DYNPD_DPL_P0 ((uint8_t)0x01) /*!< Enable dyn. payload length data pipe 0 */ -#define NRF24L01_DI_DYNPD_DPL_P1 ((uint8_t)0x02) /*!< Enable dyn. payload length data pipe 1 */ -#define NRF24L01_DI_DYNPD_DPL_P2 ((uint8_t)0x04) /*!< Enable dyn. payload length data pipe 2 */ -#define NRF24L01_DI_DYNPD_DPL_P3 ((uint8_t)0x08) /*!< Enable dyn. payload length data pipe 3 */ -#define NRF24L01_DI_DYNPD_DPL_P4 ((uint8_t)0x10) /*!< Enable dyn. payload length data pipe 4 */ -#define NRF24L01_DI_DYNPD_DPL_P5 ((uint8_t)0x20) /*!< Enable dyn. payload length data pipe 5 */ - -#define NRF24L01_DI_FEATURE ((uint8_t)0x07) /*!< FEATURE REGISTER REGISTER BIT MASK */ -#define NRF24L01_DI_FEATURE_EN_DYN_ACK ((uint8_t)0x01) /*!< Enables the W_TX_PAYLOAD_NOACK command */ -#define NRF24L01_DI_FEATURE_EN_ACK_PAY ((uint8_t)0x02) /*!< Enables Payload with ACK */ -#define NRF24L01_DI_FEATURE_EN_DPL ((uint8_t)0x04) /*!< Enables Dynamic Payload Length */ -/** @} */ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if !(HAL_USE_SPI) -#error "RF_NRF24L01 requires HAL_USE_SPI." -#endif - -#if !(HAL_USE_EXT) -#error "RF_NRF24L01 requires HAL_USE_EXT." -#endif -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @name RF Transceiver data structures and types - * @{ - */ - -/** - * @brief RF Transceiver RX/TX Address field width - */ -typedef enum { - - NRF24L01_AW_3_bytes = 0x01, /*!< 3 bytes width */ - NRF24L01_AW_4_bytes = 0x02, /*!< 4 bytes width */ - NRF24L01_AW_5_bytes = 0x03 /*!< 5 bytes width */ -} NRF24L01_AW_t; - -/** - * @brief RF Transceiver Auto Retransmit Delay - */ -typedef enum { - - NRF24L01_ARD_250us = 0x00, /*!< Wait 250us */ - NRF24L01_ARD_500us = 0x10, /*!< Wait 500us */ - NRF24L01_ARD_750us = 0x20, /*!< Wait 750us */ - NRF24L01_ARD_1000us = 0x30, /*!< Wait 1000us */ - NRF24L01_ARD_1250us = 0x40, /*!< Wait 1250us */ - NRF24L01_ARD_1500us = 0x50, /*!< Wait 1500us */ - NRF24L01_ARD_1750us = 0x60, /*!< Wait 1750us */ - NRF24L01_ARD_2000us = 0x70, /*!< Wait 2000us */ - NRF24L01_ARD_2250us = 0x80, /*!< Wait 2250us */ - NRF24L01_ARD_2500us = 0x90, /*!< Wait 2500us */ - NRF24L01_ARD_2750us = 0xA0, /*!< Wait 2750us */ - NRF24L01_ARD_3000us = 0xB0, /*!< Wait 3000us */ - NRF24L01_ARD_3250us = 0xC0, /*!< Wait 3250us */ - NRF24L01_ARD_3500us = 0xD0, /*!< Wait 3500us */ - NRF24L01_ARD_3750us = 0xE0, /*!< Wait 3750us */ - NRF24L01_ARD_4000us = 0xF0 /*!< Wait 4000us */ -} NRF24L01_ARD_t; - -/** - * @brief RF Transceiver Auto Retransmit Count - */ -typedef enum { - - NRF24L01_ARC_disabled = 0x00, /*!< Re-Transmit disabled */ - NRF24L01_ARC_1_time = 0x01, /*!< Up to 1 Re-Transmit on fail of AA */ - NRF24L01_ARC_2_times = 0x02, /*!< Up to 2 Re-Transmit on fail of AA */ - NRF24L01_ARC_3_times = 0x03, /*!< Up to 3 Re-Transmit on fail of AA */ - NRF24L01_ARC_4_times = 0x04, /*!< Up to 4 Re-Transmit on fail of AA */ - NRF24L01_ARC_5_times = 0x05, /*!< Up to 5 Re-Transmit on fail of AAs */ - NRF24L01_ARC_6_times = 0x06, /*!< Up to 6 Re-Transmit on fail of AA */ - NRF24L01_ARC_7_times = 0x07, /*!< Up to 7 Re-Transmit on fail of AA */ - NRF24L01_ARC_8_times = 0x08, /*!< Up to 8 Re-Transmit on fail of AA */ - NRF24L01_ARC_9_times = 0x09, /*!< Up to 9 Re-Transmit on fail of AA */ - NRF24L01_ARC_10_times = 0x0A, /*!< Up to 10 Re-Transmit on fail of AA */ - NRF24L01_ARC_11_times = 0x0B, /*!< Up to 11 Re-Transmit on fail of AA */ - NRF24L01_ARC_12_times = 0x0C, /*!< Up to 12 Re-Transmit on fail of AA */ - NRF24L01_ARC_13_times = 0x0D, /*!< Up to 13 Re-Transmit on fail of AA */ - NRF24L01_ARC_14_times = 0x0E, /*!< Up to 14 Re-Transmit on fail of AA */ - NRF24L01_ARC_15_times = 0x0F /*!< Up to 15 Re-Transmit on fail of AA */ -} NRF24L01_ARC_t; - - -/** - * @brief RF Transceiver configuration typedef. - * - * @detail This will select frequency channel beetween 2,4 GHz and 2,525 GHz - * @detail according to formula 2,4GHz + RF_CH[MHz]. This value must be included - * @detail between 0 and 125. - */ -typedef uint8_t NRF24L01_RF_CH_t; - -/** - * @brief RF Transceiver Air Data Rate - */ -typedef enum { - - NRF24L01_ADR_1Mbps = 0x00, /*!< Air data rate 1 Mbps */ - NRF24L01_ADR_2Mbps = 0x08 /*!< Air data rate 2 Mbps */ -} NRF24L01_ADR_t; - -/** - * @brief RF Transceiver Output Power - */ -typedef enum { - - NRF24L01_PWR_0dBm = 0x06, /*!< RF output power 0 dBm */ - NRF24L01_PWR_neg6dBm = 0x04, /*!< RF output power -6 dBm */ - NRF24L01_PWR_neg12dBm = 0x02, /*!< RF output power -12 dBm */ - NRF24L01_PWR_neg18dBm = 0x00 /*!< RF output power -18 dBm */ -} NRF24L01_PWR_t; - -/** - * @brief RF Transceiver Low Noise Amplifier - * - * @details Reduce current consumption in RX mode with 0.8 mA at cost of 1.5dB - * reduction in receiver sensitivity. - */ -typedef enum { - NRF24L01_LNA_enabled = 0x01, /*!< LNA_CURR enabled */ - NRF24L01_LNA_disabled = 0x00 /*!< LNA_CURR disabled */ -} NRF24L01_LNA_t; - -/** - * @brief RF Transceiver Backward Compatibility - * - * @details This type specifies if trasmission must be compatible to receive - * from an nRF2401/nRF2402/nRF24E1/nRF24E. - */ -typedef bool_t NRF24L01_bckwrdcmp_t; - -#if NRF24L01_USE_FEATURE || defined(__doxigen__) -/** - * @brief RF Transceiver Dynamic Payload enabler - * - * @details Enables Dynamic Payload Length - */ -typedef enum { - NRF24L01_DPL_enabled = 0x04, /*!< EN_DPL enabled */ - NRF24L01_DPL_disabled = 0x00 /*!< EN_DPL disabled */ -} NRF24L01_DPL_t; - -/** - * @brief RF Transceiver Dynamic Acknowledge with Payload enabler - * - * @details Enables Payload with ACK - */ -typedef enum { - NRF24L01_ACK_PAY_enabled = 0x02, /*!< EN_ACK_PAY enabled */ - NRF24L01_ACK_PAY_disabled = 0x00 /*!< EN_ACK_PAY disabled */ -} NRF24L01_ACK_PAY_t; - -/** - * @brief RF Transceiver Dynamic Acknowledge enabler - * - * @details Enables the W_TX_PAYLOAD_NOACK command - */ -typedef enum { - NRF24L01_DYN_ACK_enabled = 0x01, /*!< EN_DYN_ACK enabled */ - NRF24L01_DYN_ACK_disabled = 0x00 /*!< EN_DYN_ACK disabled */ -} NRF24L01_DYN_ACK_t; -#endif /* NRF24L01_USE_FEATURE */ - -/** - * @brief RF Transceiver configuration structure. - */ -typedef struct { - - /** - * @brief The chip enable line port. - */ - ioportid_t ceport; - /** - * @brief The chip enable line pad number. - */ - uint16_t cepad; - /** - * @brief The interrupt line port. - */ - ioportid_t irqport; - /** - * @brief The interrupt line pad number. - */ - uint16_t irqpad; - /** - * @brief Pointer to the SPI driver associated to this RF. - */ - SPIDriver *spip; - /** - * @brief Pointer to the SPI configuration . - */ - const SPIConfig *spicfg; - /** - * @brief Pointer to the EXT driver associated to this RF. - */ - EXTDriver *extp; - /** - * @brief EXT configuration. - */ - EXTConfig *extcfg; - /** - * @brief RF Transceiver auto retransmit count. - */ - NRF24L01_ARC_t auto_retr_count; - /** - * @brief RF Transceiver auto retransmit delay. - */ - NRF24L01_ARD_t auto_retr_delay; - /** - * @brief RF Transceiver address width. - */ - NRF24L01_AW_t address_width; - /** - * @brief RF Transceiver channel frequency. - */ - NRF24L01_RF_CH_t channel_freq; - /** - * @brief RF Transceiver air data rate. - */ - NRF24L01_ADR_t data_rate; - /** - * @brief RF Transceiver output power. - */ - NRF24L01_PWR_t out_pwr; - /** - * @brief RF Transceiver Low Noise Amplifier - */ - NRF24L01_LNA_t lna; -#if NRF24L01_USE_FEATURE || defined(__doxigen__) - /** - * @brief RF Transceiver Dynamic Payload enabler - */ - NRF24L01_DPL_t en_dpl; - - /** - * @brief RF Transceiver Dynamic Acknowledge with Payload enabler - */ - NRF24L01_ACK_PAY_t en_ack_pay; - - /** - * @brief RF Transceiver Dynamic Acknowledge enabler - */ - NRF24L01_DYN_ACK_t en_dyn_ack; -#endif /* NRF24L01_USE_FEATURE */ -} NRF24L01_Config; - -/** - * @brief RF Transceiver status register value. - */ -typedef uint8_t NRF24L01_status_t; -/** @} */ -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** - * @brief Flushes FIFOs and resets all Status flags. - * - * @pre The SPI interface must be initialized and the driver started. - * - * @param[in] spip pointer to the SPI interface - * - * @return the status register value - */ -#define nrf24l01Reset(spip) { \ - \ - nrf24l01WriteRegister(spip, NRF24L01_AD_STATUS, \ - NRF24L01_DI_STATUS_MAX_RT | \ - NRF24L01_DI_STATUS_RX_DR | \ - NRF24L01_DI_STATUS_TX_DS); \ -} - -#ifdef __cplusplus -extern "C" { -#endif -NRF24L01_status_t nrf24l01GetStatus(SPIDriver *spip); -NRF24L01_status_t nrf24l01ReadRegister(SPIDriver *spip, uint8_t reg, - uint8_t* pvalue); -NRF24L01_status_t nrf24l01WriteRegister(SPIDriver *spip, uint8_t reg, - uint8_t value); -NRF24L01_status_t nrf24l01WriteAddress(SPIDriver *spip, uint8_t reg, - uint8_t *pvalue, uint8_t addlen); -NRF24L01_status_t nrf24l01GetRxPl(SPIDriver *spip, uint8_t paylen, - uint8_t* rxbuf); -NRF24L01_status_t nrf24l01WriteTxPl(SPIDriver *spip, uint8_t paylen, - uint8_t* txbuf); -NRF24L01_status_t nrf24l01FlushTx(SPIDriver *spip); -NRF24L01_status_t nrf24l01FlushRx(SPIDriver *spip); -#if NRF24L01_USE_FEATURE || defined(__DOXYGEN__) -NRF24L01_status_t nrf24l01Activate(SPIDriver *spip); -NRF24L01_status_t nrf24l01ReadRxPlWid(SPIDriver *spip, uint8_t* ppaylen); -NRF24L01_status_t nrf24l01WriteAckPl(SPIDriver *spip, uint8_t ppp, uint8_t paylen, - uint8_t* payload); -NRF24L01_status_t nrf24l01WriteTxPlNoAck(SPIDriver *spip, uint8_t paylen, - uint8_t* txbuf); -#endif /* NRF24L01_USE_FEATURE */ -#ifdef __cplusplus -} -#endif - -#endif /* _NRF24L01_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.c b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.c deleted file mode 100644 index 39e47ec..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - HDC100x for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file HDC1000.c - * @brief HDC1000 interface module code. - * - * @addtogroup hdc1000 - * @{ - */ - -#define I2C_HELPERS_AUTOMATIC_DRV TRUE - -#include "hal.h" -#include "i2c_helpers.h" -#include "hdc1000.h" - -/* DOC: http://www.ti.com/lit/ds/symlink/hdc1008.pdf - */ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/* I2C Register */ -#define HDC1000_REG_TEMP_HUMID 0x00 -#define HDC1000_REG_TEMP 0x00 -#define HDC1000_REG_HUMID 0x01 -#define HDC1000_REG_CONFIG 0x02 -#define HDC1000_REG_SERIAL 0xFB -#define HDC1000_REG_SERIAL_1 0xFB -#define HDC1000_REG_SERIAL_2 0xFC -#define HDC1000_REG_SERIAL_3 0xFD -#define HDC1000_REG_MANUF_ID 0xFE -#define HDC1000_REG_DEVICE_ID 0xFF - -/* Configuration */ -#define HDC1000_CONFIG_RST (1 << 15) -#define HDC1000_CONFIG_HEATER (1 << 13) -#define HDC1000_CONFIG_MODE_ONE (0 << 12) -#define HDC1000_CONFIG_MODE_BOTH (1 << 12) -#define HDC1000_CONFIG_BATT (1 << 11) -#define HDC1000_CONFIG_TRES_14 (0) -#define HDC1000_CONFIG_TRES_11 (1 << 10) -#define HDC1000_CONFIG_HRES_14 (0) -#define HDC1000_CONFIG_HRES_11 (1 << 8) -#define HDC1000_CONFIG_HRES_8 (1 << 9) - -/* Value */ -#define HDC1000_MANUF_ID 0x5449 -#define HDC1000_DEVICE_ID 0x1000 - -/* Delay in micro seconds */ -#define HDC1000_DELAY_ACQUIRE_SAFETY 1000 -#define HDC1000_DELAY_ACQUIRE_TRES_14 6350 -#define HDC1000_DELAY_ACQUIRE_TRES_11 3650 -#define HDC1000_DELAY_ACQUIRE_HRES_14 6500 -#define HDC1000_DELAY_ACQUIRE_HRES_11 3850 -#define HDC1000_DELAY_ACQUIRE_HRES_8 2500 -#define HDC1000_DELAY_STARTUP 15000 - -// Deefault config (high res) -#define HDC1000_CONFIG_RES (HDC1000_CONFIG_TRES_14 | \ - HDC1000_CONFIG_HRES_14) -#define HDC1000_DELAY_ACQUIRE (HDC1000_DELAY_ACQUIRE_TRES_14 + \ - HDC1000_DELAY_ACQUIRE_HRES_14) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static inline msg_t -_apply_config(HDC1000_drv *drv) { - struct __attribute__((packed)) { - uint8_t reg; - uint16_t conf; - } tx = { HDC1000_REG_CONFIG, cpu_to_be16(drv->cfg) }; - - return i2c_send((uint8_t*)&tx, sizeof(tx)); -} - -static inline msg_t -_decode_measure(HDC1000_drv *drv, - uint32_t val, float *temperature, float *humidity) { - (void)drv; - - /* Temperature */ - if (temperature) { - float temp = (val >> 16); - temp /= 65536; - temp *= 165; - temp -= 40; - *temperature = temp; - } - - /* Humidiy */ - if (humidity) { - float hum = (val & 0xFFFF); - hum /= 65535; - hum *= 100; - *humidity = hum; - } - - /* ok */ - return MSG_OK; -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -void -HDC1000_init(HDC1000_drv *drv, HDC1000_config *config) { - drv->config = config; - drv->cfg = HDC1000_CONFIG_RST | HDC1000_CONFIG_MODE_BOTH | - HDC1000_CONFIG_RES; - drv->delay = (HDC1000_DELAY_ACQUIRE + - HDC1000_DELAY_ACQUIRE_SAFETY) / 1000; - drv->state = SENSOR_INIT; -} - -msg_t -HDC1000_check(HDC1000_drv *drv) { - uint16_t manuf, device; - - msg_t msg; - if (((msg = i2c_reg_recv16_be(HDC1000_REG_MANUF_ID, &manuf )) < MSG_OK) || - ((msg = i2c_reg_recv16_be(HDC1000_REG_DEVICE_ID, &device)) < MSG_OK)) - return msg; - - if ((manuf != HDC1000_MANUF_ID) || (device != HDC1000_DEVICE_ID)) - return SENSOR_NOTFOUND; - - return MSG_OK; -} - - -msg_t -HDC1000_start(HDC1000_drv *drv) { - osalDbgAssert((drv->state == SENSOR_INIT ) || - (drv->state == SENSOR_ERROR ) || - (drv->state == SENSOR_STOPPED), - "invalid state"); - msg_t msg; - if ((msg = _apply_config(drv)) < MSG_OK) { - drv->state = SENSOR_ERROR; - return msg; - } - drv->state = SENSOR_STARTED; - return MSG_OK; -} - -msg_t -HDC1000_stop(HDC1000_drv *drv) { - drv->state = SENSOR_STOPPED; - return MSG_OK; -} - -msg_t -HDC1000_setHeater(HDC1000_drv *drv, bool on) { - if (on) { drv->cfg |= HDC1000_CONFIG_HEATER; } - else { drv->cfg &= ~HDC1000_CONFIG_HEATER; } - - msg_t msg; - if ((msg = _apply_config(drv)) < MSG_OK) { - drv->state = SENSOR_ERROR; - return msg; - } - return MSG_OK; -} - -msg_t -HDC1000_startMeasure(HDC1000_drv *drv) { - msg_t msg; - osalDbgAssert(drv->state == SENSOR_STARTED, "invalid state"); - if ((msg = i2c_reg(HDC1000_REG_TEMP_HUMID)) < MSG_OK) - return msg; - drv->state = SENSOR_MEASURING; - return MSG_OK; -} - - -msg_t -HDC1000_readSerial(HDC1000_drv *drv, uint8_t *serial) { - msg_t msg; - osalDbgAssert(drv->state == SENSOR_STARTED, "invalid state"); - - if (((msg = i2c_reg_recv16(HDC1000_REG_SERIAL_1, - (uint16_t*)&serial[0])) < MSG_OK) || - ((msg = i2c_reg_recv16(HDC1000_REG_SERIAL_2, - (uint16_t*)&serial[2])) < MSG_OK) || - ((msg = i2c_reg_recv8 (HDC1000_REG_SERIAL_3, - (uint8_t*) &serial[4])) < MSG_OK)) - return msg; - return MSG_OK; -} - - -msg_t -HDC1000_readMeasure(HDC1000_drv *drv, - float *temperature, float *humidity) { - msg_t msg; - uint32_t val; - - osalDbgAssert((drv->state == SENSOR_MEASURING) || - (drv->state == SENSOR_READY ), - "invalid state"); - - if ((msg = i2c_recv32_be(&val)) < MSG_OK) { - drv->state = SENSOR_ERROR; - return msg; - } - - drv->state = SENSOR_STARTED; - - return _decode_measure(drv, val, temperature, humidity); -} - -msg_t -HDC1000_readTemperatureHumidity(HDC1000_drv *drv, - float *temperature, float *humidity) { - msg_t msg; - uint32_t val; - - osalDbgAssert(drv->state == SENSOR_STARTED, "invalid state"); - - /* Request value */ - if ((msg = i2c_reg(HDC1000_REG_TEMP_HUMID)) < MSG_OK) - return msg; - - /* Wait */ - osalThreadSleepMilliseconds(drv->delay); - - /* Get value */ - if ((msg = i2c_recv32_be(&val)) < MSG_OK) { - drv->state = SENSOR_ERROR; - return msg; - } - - return _decode_measure(drv, val, temperature, humidity); -} - - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.h b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.h deleted file mode 100644 index e4eae4c..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/hdc1000.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - HDC100x for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file hdc1000.h - * @brief HDC1000 Temperature/Humidiry sensor interface module header. - * - * When changing sensor settings, you generally need to wait - * for 2 * getAquisitionTime(), as usually the first acquisition - * will be corrupted by the change of settings. - * - * No locking is done. - * - * @{ - */ - -#ifndef _SENSOR_HDC1000_H_ -#define _SENSOR_HDC1000_H_ - -#include -#include -#include "i2c_helpers.h" -#include "sensor.h" - - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define HDC1000_CONTINUOUS_ACQUISITION_SUPPORTED FALSE - -/* I2C address */ -#define HDC1000_I2CADDR_1 0x40 -#define HDC1000_I2CADDR_2 0x41 -#define HDC1000_I2CADDR_3 0x42 -#define HDC1000_I2CADDR_4 0x43 - -#define HDC1000_SERIAL_SIZE 5 /**< @brief Size of serial (40bits) */ - -/** - * @brief Time necessary for the sensor to boot - */ -#define HDC1000_BOOTUP_TIME 15 - -/** - * @brief Time necessary for the sensor to start - */ -#define HDC1000_STARTUP_TIME 0 - - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#define HDC1000_I2CADDR_DEFAULT HDC1000_I2CADDR_1 - - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief HDC1000 configuration structure. - */ -typedef struct { - I2CHelper i2c; /* keep it first */ -} HDC1000_config; - -/** - * @brief HDC1000 configuration structure. - */ -typedef struct { - HDC1000_config *config; - sensor_state_t state; - unsigned int delay; - uint16_t cfg; -} HDC1000_drv; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** - * @brief Initialize the sensor driver - */ -void -HDC1000_init(HDC1000_drv *drv, - HDC1000_config *config); - -/** - * @brief Start the sensor - */ -msg_t -HDC1000_start(HDC1000_drv *drv); - -/** - * @brief Stop the sensor - * - * @details If the sensor support it, it will be put in low energy mode. - */ -msg_t -HDC1000_stop(HDC1000_drv *drv); - -/** - * @brief Check that the sensor is really present - */ -msg_t -HDC1000_check(HDC1000_drv *drv); - - -msg_t -HDC1000_readSerial(HDC1000_drv *drv, uint8_t *serial); - -/** - * @brief Control the HD1000 heater. - */ -msg_t -HDC1000_setHeater(HDC1000_drv *drv, - bool on); - - - -/** - * @brief Time in milli-seconds necessary for acquiring a naw measure - * - * @returns - * unsigned int time in millis-seconds - */ -static inline unsigned int -HDC1000_getAcquisitionTime(HDC1000_drv *drv) { - return drv->delay; -} - -/** - * @brief Trigger a mesure acquisition - */ -msg_t -HDC1000_startMeasure(HDC1000_drv *drv); - -/** - * @brief Read the newly acquiered measure - * - * @note According the the sensor design the measure read - * can be any value acquired after the acquisition time - * and the call to readMeasure. - */ -msg_t -HDC1000_readMeasure(HDC1000_drv *drv, - float *temperature, float *humidity); - - -/** - * @brief Read temperature and humidity - * - * @details According to the sensor specification/configuration - * (see #HDC1000_CONTINUOUS_ACQUISITION_SUPPORTED), - * if the sensor is doing continuous measurement - * it's value will be requested and returned immediately. - * Otherwise a measure is started, the necessary amount of - * time for acquiring the value is spend sleeping (not spinning), - * and finally the measure is read. - * - * @note In continuous measurement mode, if you just started - * the sensor, you will need to wait getAcquisitionTime() - * in addition to the usual #HDC1000_STARTUP_TIME - - * @note If using several sensors, it is better to start all the - * measure together, wait for the sensor having the longuest - * aquisition time, and finally read all the values - */ -msg_t -HDC1000_readTemperatureHumidity(HDC1000_drv *drv, - float *temperature, float *humidity); - -/** - * @brief Return the humidity value in percent. - * - * @details Use readTemperatureHumidity() for returning the humidity value. - * - * @note Prefere readTemperatureHumidity(), if you need both temperature - * and humidity, or if you need better error handling. - * - * @returns - * float humidity percent - * NAN on failure - */ -static inline float -HDC1000_getHumidity(HDC1000_drv *drv) { - float humidity = NAN; - HDC1000_readTemperatureHumidity(drv, NULL, &humidity); - return humidity; -} - -/** - * @brief Return the temperature value in °C. - * - * @details Use readTemperatureHumidity() for returning the humidity value. - * - * @note Prefere readTemperatureHumidity(), if you need both temperature - * and humidity, or if you need better error handling. - * - * @returns - * float humidity percent - * NAN on failure - */ -static inline float -HDC1000_getTemperature(HDC1000_drv *drv) { - float temperature = NAN; - HDC1000_readTemperatureHumidity(drv, &temperature, NULL); - return temperature; -} - - -#endif - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.c b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.c deleted file mode 100644 index 4b22ea9..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - MCP9808 for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define I2C_HELPERS_AUTOMATIC_DRV TRUE - -#include "hal.h" -#include "i2c_helpers.h" -#include "mcp9808.h" - -// http://www.mouser.com/ds/2/268/25095A-15487.pdf -// http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf - - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/* I2C Register */ -#define MCP9808_REG_CONFIG 0x01 -#define MCP9808_REG_UPPER_TEMP 0x02 -#define MCP9808_REG_LOWER_TEMP 0x03 -#define MCP9808_REG_CRIT_TEMP 0x04 -#define MCP9808_REG_AMBIENT_TEMP 0x05 -#define MCP9808_REG_MANUF_ID 0x06 -#define MCP9808_REG_DEVICE_ID 0x07 -#define MCP9808_REG_RESOLUTION 0x08 - -/* Config */ -#define MCP9808_REG_CONFIG_SHUTDOWN 0x0100 -#define MCP9808_REG_CONFIG_CRITLOCKED 0x0080 -#define MCP9808_REG_CONFIG_WINLOCKED 0x0040 -#define MCP9808_REG_CONFIG_INTCLR 0x0020 -#define MCP9808_REG_CONFIG_ALERTSTAT 0x0010 -#define MCP9808_REG_CONFIG_ALERTCTRL 0x0008 -#define MCP9808_REG_CONFIG_ALERTSEL 0x0002 -#define MCP9808_REG_CONFIG_ALERTPOL 0x0002 -#define MCP9808_REG_CONFIG_ALERTMODE 0x0001 - -/* Device Id */ -#define MCP9808_MANUF_ID 0x0054 -#define MCP9808_DEVICE_ID 0x0400 - -/* Resolution */ -#define MCP9808_RES_2 0x00 /* 1/2 = 0.5 */ -#define MCP9808_RES_4 0x01 /* 1/4 = 0.25 */ -#define MCP9808_RES_8 0x10 /* 1/8 = 0.125 */ -#define MCP9808_RES_16 0x11 /* 1/16 = 0.0625 */ - -/* Time in milli-seconds */ -#define MCP9808_DELAY_ACQUIRE_RES_2 30 -#define MCP9808_DELAY_ACQUIRE_RES_4 65 -#define MCP9808_DELAY_ACQUIRE_RES_8 130 -#define MCP9808_DELAY_ACQUIRE_RES_16 250 - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static inline msg_t -_apply_config(MCP9808_drv *drv) { - struct __attribute__((packed)) { - uint8_t reg; - uint16_t conf; - } tx = { MCP9808_REG_CONFIG, cpu_to_be16(drv->cfg) }; - - return i2c_send((uint8_t*)&tx, sizeof(tx)); -} - -static inline msg_t -_decode_measure(MCP9808_drv *drv, - uint16_t val, float *temperature) { - - /* Temperature */ - if (temperature) { - float temp = val & 0x0fff; - if (val & 0x1000) temp -= 0x1000; - - float factor = 16.0F; - switch(drv->resolution) { - case RES_2 : factor = 2.0F; break; - case RES_4 : factor = 4.0F; break; - case RES_8 : factor = 8.0F; break; - case RES_16: factor = 16.0F; break; - } - - *temperature = temp / factor; - } - - /* Ok */ - return MSG_OK; -} - - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -void -MCP9808_init(MCP9808_drv *drv, MCP9808_config *config) { - drv->config = config; - drv->cfg = 0; - drv->resolution = RES_16; /* power up default */ - drv->state = SENSOR_INIT; -} - -msg_t -MCP9808_check(MCP9808_drv *drv) { - uint16_t manuf, device; - - msg_t msg; - if (((msg = i2c_reg_recv16_be(MCP9808_REG_MANUF_ID, &manuf )) < MSG_OK) || - ((msg = i2c_reg_recv16_be(MCP9808_REG_DEVICE_ID, &device)) < MSG_OK)) - return msg; - - if ((manuf != MCP9808_MANUF_ID) || (device != MCP9808_DEVICE_ID)) - return SENSOR_NOTFOUND; - - return MSG_OK; -} - -msg_t -MCP9808_setResolution(MCP9808_drv *drv, MCP9808_resolution_t res) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t resolution; - } tx = { MCP9808_REG_RESOLUTION, res }; - - msg_t msg; - if ((msg = i2c_send((uint8_t*)&tx, sizeof(tx))) < MSG_OK) - return msg; - - drv->resolution = res; - return MSG_OK; -} - -msg_t -MCP9808_start(MCP9808_drv *drv) { - drv->cfg &= ~(MCP9808_REG_CONFIG_SHUTDOWN); - return _apply_config(drv); -} - -msg_t -MCP9808_stop(MCP9808_drv *drv) { - drv->cfg |= (MCP9808_REG_CONFIG_SHUTDOWN); - return _apply_config(drv); -} - -unsigned int -MCP9808_getAcquisitionTime(MCP9808_drv *drv) { - switch(drv->resolution) { - case RES_2 : return MCP9808_DELAY_ACQUIRE_RES_2; - case RES_4 : return MCP9808_DELAY_ACQUIRE_RES_4; - case RES_8 : return MCP9808_DELAY_ACQUIRE_RES_8; - case RES_16: return MCP9808_DELAY_ACQUIRE_RES_16; - } - osalDbgAssert(false, "OOPS"); - return 0; -} - -msg_t -MCP9808_readMeasure(MCP9808_drv *drv, - float *temperature) { - - msg_t msg; - uint16_t val; - - if ((msg = i2c_reg_recv16_be(MCP9808_REG_AMBIENT_TEMP, &val)) < MSG_OK) - return msg; - - return _decode_measure(drv, val, temperature); -} - - -msg_t -MCP9808_readTemperature(MCP9808_drv *drv, - float *temperature) { - osalDbgAssert(drv->state == SENSOR_STARTED, "invalid state"); - - msg_t msg; - uint16_t val; - - if ((msg = i2c_reg_recv16_be(MCP9808_REG_AMBIENT_TEMP, &val)) < MSG_OK) - return msg; - - return _decode_measure(drv, val, temperature); -} diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.h b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.h deleted file mode 100644 index 857f2f9..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/mcp9808.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - MCP9808 for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _SENSOR_MCP9808_H_ -#define _SENSOR_MCP9808_H_ - -#include -#include "i2c_helpers.h" -#include "sensor.h" - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define MCP9808_CONTINUOUS_ACQUISITION_SUPPORTED TRUE - - -#define MCP9808_I2CADDR_FIXED 0x18 - -/** - * @brief Time necessary for the sensor to boot - */ -#define MCP9808_BOOTUP_TIME 0 - -/** - * @brief Time necessary for the sensor to start - */ -#define MCP9808_STARTUP_TIME 0 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#define MCP9808_I2CADDR_DEFAULT MCP9808_I2CADDR_FIXED - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Different possible resolution - */ -typedef enum { - RES_2 = 0x00, /**< @brief Resolution of 1/2 = 0.5 */ - RES_4 = 0x01, /**< @brief Resolution of 1/4 = 0.25 */ - RES_8 = 0x10, /**< @brief Resolution of 1/8 = 0.125 */ - RES_16 = 0x11, /**< @brief Resolution of 1/16 = 0.0625 */ -} MCP9808_resolution_t; - -/** - * @brief MCP9808 configuration structure. - */ -typedef struct { - I2CHelper i2c; /* keep it first */ -} MCP9808_config; - -/** - * @brief MCP9808 configuration structure. - */ -typedef struct { - MCP9808_config *config; - sensor_state_t state; - MCP9808_resolution_t resolution; - uint16_t cfg; -} MCP9808_drv; - -/** - * @brief MCP9808 measure reading - */ -typedef struct { - float temperature; -} MCP9808_measure; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** - * @brief Initialize the sensor driver - */ -void -MCP9808_init(MCP9808_drv *drv, - MCP9808_config *config); - -/** - * @brief Check that the sensor is really present - */ -msg_t -MCP9808_check(MCP9808_drv *drv); - -/** - * @brief Start the sensor - */ -msg_t -MCP9808_start(MCP9808_drv *drv); - -/** - * @brief Stop the sensor - * - * @details If the sensor support it, it will be put in low energy mode. - */ -msg_t -MCP9808_stop(MCP9808_drv *drv); - -/** - * @brief Control the MCP9809 resolution. - */ -msg_t -MCP9808_setResolution(MCP9808_drv *drv, - MCP9808_resolution_t res); - -/** - * @brief Time in milli-seconds necessary for acquiring a naw measure - * - * @returns - * unsigned int time in millis-seconds - */ -unsigned int -MCP9808_getAcquisitionTime(MCP9808_drv *drv); - -/** - * @brief Trigger a mesure acquisition - */ -static inline msg_t -MCP9808_startMeasure(MCP9808_drv *drv) { - (void)drv; - return MSG_OK; -} - -/** - * @brief Read the newly acquiered measure - * - * @note According the the sensor design the measure read - * can be any value acquired after the acquisition time - * and the call to readMeasure. - */ -msg_t -MCP9808_readMeasure(MCP9808_drv *drv, - float *temperature); - - -/** - * @brief Read temperature and humidity - * - * @details According to the sensor specification/configuration - * (see #MCP9808_CONTINUOUS_ACQUISITION_SUPPORTED), - * if the sensor is doing continuous measurement - * it's value will be requested and returned immediately. - * Otherwise a measure is started, the necessary amount of - * time for acquiring the value is spend sleeping (not spinning), - * and finally the measure is read. - * - * @note In continuous measurement mode, if you just started - * the sensor, you will need to wait getAcquisitionTime() - * in addition to the usual getStartupTime() - - * @note If using several sensors, it is better to start all the - * measure together, wait for the sensor having the longuest - * aquisition time, and finally read all the values - */ -msg_t -MCP9808_readTemperature(MCP9808_drv *drv, - float *temperature); - -/** - * @brief Return the temperature value in °C. - * - * @note Prefere readTemperature(), if you need better error handling. - * - * @return The temperature in °C - * @retval float humidity percent - * @retval NAN on failure - */ -static inline float -MCP9808_getTemperature(MCP9808_drv *drv) { - float temperature = NAN; - MCP9808_readTemperature(drv, &temperature); - return temperature; -} - -#endif - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/sensor.h b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/sensor.h deleted file mode 100644 index bd544b1..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/sensor.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * - * Example of function calls. - * - * @code - * static SENSOR_config sensor_config = { - * }; - * static SENSOR_drv sensor_drv; - * @endcode - * - * - * @code - * osalThreadSleepMilliseconds(SENSOR_BOOTUP_TIME); - * SENSOR_init(&sensor_drv); - * @endcode - * - * @code - * SENSOR_start(&sensor_drv, &sensor_config); - * osalThreadSleepMilliseconds(SENSOR_STARTUP_TIME); - * @endcode - * - * If using SENSOR_startMeasure()/SENSOR_readMeasure() - * @code - * while(true) { - * SENSOR_startMeasure(&sensor_drv); - * osalThreadSleepMilliseconds(SENSOR_getAcquisitionTime()); - * SENSOR_readMeasure(&sensor_drv, ...); - * } - * @endcode - * - * If using SENSOR_readValue() or SENSOR_getValue() - * @code - * #if SENSOR_CONTINUOUS_ACQUISITION_SUPPORTED == TRUE - * osalThreadSleepMilliseconds(SENSOR_getAcquisitionTime()) - * #endif - * - * while(true) { - * SENSOR_readValue(&sensor_drv, ...); - * } - * @encode - */ -#ifndef _SENSOR_H_ -#define _SENSOR_H_ - -#define SENSOR_OK MSG_OK /**< @brief Operation successful. */ -#define SENSOR_TIMEOUT MSG_TIMEOUT /**< @brief Communication timeout */ -#define SENSOR_RESET MSG_REST /**< @brief Communication error. */ -#define SENSOR_NOTFOUND (msg_t)-20 /**< @brief Sensor not found. */ - - -/** - * @brief Driver state machine possible states. - */ -typedef enum __attribute__ ((__packed__)) { - SENSOR_UNINIT = 0, /**< Not initialized. */ - SENSOR_INIT = 1, /**< Initialized. */ - SENSOR_STARTED = 2, /**< Started. */ - SENSOR_MEASURING = 4, /**< Measuring. */ - SENSOR_READY = 3, /**< Ready. */ - SENSOR_STOPPED = 5, /**< Stopped. */ - SENSOR_ERROR = 6, /**< Error. */ -} sensor_state_t; - -#endif - - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.c b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.c deleted file mode 100644 index a4ac8ec..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.c +++ /dev/null @@ -1,386 +0,0 @@ -/* - TSL2561 for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * Illuminance calculation code provided by www.taosinc.com - * DOC: http://ams.com/eng/content/download/250096/975518/143687 - */ -#define I2C_HELPERS_AUTOMATIC_DRV TRUE - -#include "hal.h" -#include "i2c_helpers.h" -#include "tsl2561.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -// Integration time in µs -#define TSL2561_DELAY_INTTIME_SHORT 13700 // 13.7 ms -#define TSL2561_DELAY_INTTIME_MEDIUM 120000 // 120.0 ms -#define TSL2561_DELAY_INTTIME_LONG 450000 // 450.0 ms - - -#define TSL2561_COMMAND_BIT (0x80) -#define TSL2561_CLEAR_BIT (0x40) -#define TSL2561_WORD_BIT (0x20) -#define TSL2561_BLOCK_BIT (0x10) - -#define TSL2561_CONTROL_POWERON (0x03) -#define TSL2561_CONTROL_POWEROFF (0x00) - -#define TSL2561_LUX_LUXSCALE (14) -#define TSL2561_LUX_RATIOSCALE (9) -#define TSL2561_LUX_CHSCALE (10) // Scale channel values by 2^10 -#define TSL2561_LUX_CHSCALE_TINT0 (0x7517) // 322/11 * 2^TSL2561_LUX_CHSCALE -#define TSL2561_LUX_CHSCALE_TINT1 (0x0FE7) // 322/81 * 2^TSL2561_LUX_CHSCALE - - -// I2C Register -#define TSL2561_REG_CONTROL 0x00 -#define TSL2561_REG_TIMING 0x01 -#define TSL2561_REG_THRESHHOLDLLOW 0x02 -#define TSL2561_REG_THRESHHOLDLHIGH 0x03 -#define TSL2561_REG_THRESHHOLDHLOW 0x04 -#define TSL2561_REG_THRESHHOLDHHIGH 0x05 -#define TSL2561_REG_INTERRUPT 0x06 -#define TSL2561_REG_CRC 0x08 -#define TSL2561_REG_ID 0x0A -#define TSL2561_REG_DATA0LOW 0x0C -#define TSL2561_REG_DATA0HIGH 0x0D -#define TSL2561_REG_DATA1LOW 0x0E -#define TSL2561_REG_DATA1HIGH 0x0F - - -// Auto-gain thresholds -#define TSL2561_AGC_THI_SHORT (4850) // Max value at Ti 13ms = 5047 -#define TSL2561_AGC_TLO_SHORT (100) -#define TSL2561_AGC_THI_MEDIUM (36000) // Max value at Ti 101ms = 37177 -#define TSL2561_AGC_TLO_MEDIUM (200) -#define TSL2561_AGC_THI_LONG (63000) // Max value at Ti 402ms = 65535 -#define TSL2561_AGC_TLO_LONG (500) - -// Clipping thresholds -#define TSL2561_CLIPPING_SHORT (4900) -#define TSL2561_CLIPPING_MEDIUM (37000) -#define TSL2561_CLIPPING_LONG (65000) - -// T, FN and CL package values -#define TSL2561_LUX_K1T (0x0040) // 0.125 * 2^RATIO_SCALE -#define TSL2561_LUX_B1T (0x01f2) // 0.0304 * 2^LUX_SCALE -#define TSL2561_LUX_M1T (0x01be) // 0.0272 * 2^LUX_SCALE -#define TSL2561_LUX_K2T (0x0080) // 0.250 * 2^RATIO_SCALE -#define TSL2561_LUX_B2T (0x0214) // 0.0325 * 2^LUX_SCALE -#define TSL2561_LUX_M2T (0x02d1) // 0.0440 * 2^LUX_SCALE -#define TSL2561_LUX_K3T (0x00c0) // 0.375 * 2^RATIO_SCALE -#define TSL2561_LUX_B3T (0x023f) // 0.0351 * 2^LUX_SCALE -#define TSL2561_LUX_M3T (0x037b) // 0.0544 * 2^LUX_SCALE -#define TSL2561_LUX_K4T (0x0100) // 0.50 * 2^RATIO_SCALE -#define TSL2561_LUX_B4T (0x0270) // 0.0381 * 2^LUX_SCALE -#define TSL2561_LUX_M4T (0x03fe) // 0.0624 * 2^LUX_SCALE -#define TSL2561_LUX_K5T (0x0138) // 0.61 * 2^RATIO_SCALE -#define TSL2561_LUX_B5T (0x016f) // 0.0224 * 2^LUX_SCALE -#define TSL2561_LUX_M5T (0x01fc) // 0.0310 * 2^LUX_SCALE -#define TSL2561_LUX_K6T (0x019a) // 0.80 * 2^RATIO_SCALE -#define TSL2561_LUX_B6T (0x00d2) // 0.0128 * 2^LUX_SCALE -#define TSL2561_LUX_M6T (0x00fb) // 0.0153 * 2^LUX_SCALE -#define TSL2561_LUX_K7T (0x029a) // 1.3 * 2^RATIO_SCALE -#define TSL2561_LUX_B7T (0x0018) // 0.00146 * 2^LUX_SCALE -#define TSL2561_LUX_M7T (0x0012) // 0.00112 * 2^LUX_SCALE -#define TSL2561_LUX_K8T (0x029a) // 1.3 * 2^RATIO_SCALE -#define TSL2561_LUX_B8T (0x0000) // 0.000 * 2^LUX_SCALE -#define TSL2561_LUX_M8T (0x0000) // 0.000 * 2^LUX_SCALE - -// CS package values -#define TSL2561_LUX_K1C (0x0043) // 0.130 * 2^RATIO_SCALE -#define TSL2561_LUX_B1C (0x0204) // 0.0315 * 2^LUX_SCALE -#define TSL2561_LUX_M1C (0x01ad) // 0.0262 * 2^LUX_SCALE -#define TSL2561_LUX_K2C (0x0085) // 0.260 * 2^RATIO_SCALE -#define TSL2561_LUX_B2C (0x0228) // 0.0337 * 2^LUX_SCALE -#define TSL2561_LUX_M2C (0x02c1) // 0.0430 * 2^LUX_SCALE -#define TSL2561_LUX_K3C (0x00c8) // 0.390 * 2^RATIO_SCALE -#define TSL2561_LUX_B3C (0x0253) // 0.0363 * 2^LUX_SCALE -#define TSL2561_LUX_M3C (0x0363) // 0.0529 * 2^LUX_SCALE -#define TSL2561_LUX_K4C (0x010a) // 0.520 * 2^RATIO_SCALE -#define TSL2561_LUX_B4C (0x0282) // 0.0392 * 2^LUX_SCALE -#define TSL2561_LUX_M4C (0x03df) // 0.0605 * 2^LUX_SCALE -#define TSL2561_LUX_K5C (0x014d) // 0.65 * 2^RATIO_SCALE -#define TSL2561_LUX_B5C (0x0177) // 0.0229 * 2^LUX_SCALE -#define TSL2561_LUX_M5C (0x01dd) // 0.0291 * 2^LUX_SCALE -#define TSL2561_LUX_K6C (0x019a) // 0.80 * 2^RATIO_SCALE -#define TSL2561_LUX_B6C (0x0101) // 0.0157 * 2^LUX_SCALE -#define TSL2561_LUX_M6C (0x0127) // 0.0180 * 2^LUX_SCALE -#define TSL2561_LUX_K7C (0x029a) // 1.3 * 2^RATIO_SCALE -#define TSL2561_LUX_B7C (0x0037) // 0.00338 * 2^LUX_SCALE -#define TSL2561_LUX_M7C (0x002b) // 0.00260 * 2^LUX_SCALE -#define TSL2561_LUX_K8C (0x029a) // 1.3 * 2^RATIO_SCALE -#define TSL2561_LUX_B8C (0x0000) // 0.000 * 2^LUX_SCALE -#define TSL2561_LUX_M8C (0x0000) // 0.000 * 2^LUX_SCALE - - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -#define CEILING(x,y) (((x) + (y) - 1) / (y)) - -static inline unsigned int -calculateIlluminance(TSL2561_integration_time_t integration_time, - TSL2561_gain_t gain, - uint16_t broadband, uint16_t ir, - unsigned int partno) { - unsigned long channel_1; - unsigned long channel_0; - - /* Get value for channel scaling, and clipping */ - uint16_t clip_threshold = 0; - unsigned long channel_scale = 0; - switch (integration_time) { - case TSL2561_INTEGRATIONTIME_SHORT: - clip_threshold = TSL2561_CLIPPING_SHORT; - channel_scale = TSL2561_LUX_CHSCALE_TINT0; - break; - case TSL2561_INTEGRATIONTIME_MEDIUM: - clip_threshold = TSL2561_CLIPPING_MEDIUM; - channel_scale = TSL2561_LUX_CHSCALE_TINT1; - break; - case TSL2561_INTEGRATIONTIME_LONG: - clip_threshold = TSL2561_CLIPPING_LONG; - channel_scale = (1 << TSL2561_LUX_CHSCALE); - break; - default: - // assert failed - break; - } - - /* Check for saturated sensor (ie: clipping) */ - if ((broadband > clip_threshold) || (ir > clip_threshold)) { - return TSL2561_OVERLOADED; - } - - /* Scale for gain (1x or 16x) */ - if (gain == TSL2561_GAIN_1X) - channel_scale <<= 4; - - /* Scale the channel values */ - channel_0 = (broadband * channel_scale) >> TSL2561_LUX_CHSCALE; - channel_1 = (ir * channel_scale) >> TSL2561_LUX_CHSCALE; - - /* Find the ratio of the channel values (Channel_1/Channel_0) */ - unsigned long _ratio = 0; - if (channel_0 != 0) - _ratio = (channel_1 << (TSL2561_LUX_RATIOSCALE+1)) / channel_0; - unsigned long ratio = (_ratio + 1) >> 1; /* round the ratio value */ - - /* Find linear approximation */ - unsigned int b = 0; - unsigned int m = 0; - - switch (partno) { -#if TSL2561_WITH_CS - case 0x1: // 0001 = TSL2561 CS - if ((ratio >= 0) && (ratio <= TSL2561_LUX_K1C)) - { b=TSL2561_LUX_B1C; m=TSL2561_LUX_M1C; } - else if (ratio <= TSL2561_LUX_K2C) - { b=TSL2561_LUX_B2C; m=TSL2561_LUX_M2C; } - else if (ratio <= TSL2561_LUX_K3C) - { b=TSL2561_LUX_B3C; m=TSL2561_LUX_M3C; } - else if (ratio <= TSL2561_LUX_K4C) - { b=TSL2561_LUX_B4C; m=TSL2561_LUX_M4C; } - else if (ratio <= TSL2561_LUX_K5C) - { b=TSL2561_LUX_B5C; m=TSL2561_LUX_M5C; } - else if (ratio <= TSL2561_LUX_K6C) - { b=TSL2561_LUX_B6C; m=TSL2561_LUX_M6C; } - else if (ratio <= TSL2561_LUX_K7C) - { b=TSL2561_LUX_B7C; m=TSL2561_LUX_M7C; } - else if (ratio > TSL2561_LUX_K8C) - { b=TSL2561_LUX_B8C; m=TSL2561_LUX_M8C; } - break; -#endif -#if TSL2561_WITH_T_FN_CL - case 0x5: // 0101 = TSL2561 T/FN/CL - if ((ratio >= 0) && (ratio <= TSL2561_LUX_K1T)) - { b=TSL2561_LUX_B1T; m=TSL2561_LUX_M1T; } - else if (ratio <= TSL2561_LUX_K2T) - { b=TSL2561_LUX_B2T; m=TSL2561_LUX_M2T; } - else if (ratio <= TSL2561_LUX_K3T) - { b=TSL2561_LUX_B3T; m=TSL2561_LUX_M3T; } - else if (ratio <= TSL2561_LUX_K4T) - { b=TSL2561_LUX_B4T; m=TSL2561_LUX_M4T; } - else if (ratio <= TSL2561_LUX_K5T) - { b=TSL2561_LUX_B5T; m=TSL2561_LUX_M5T; } - else if (ratio <= TSL2561_LUX_K6T) - { b=TSL2561_LUX_B6T; m=TSL2561_LUX_M6T; } - else if (ratio <= TSL2561_LUX_K7T) - { b=TSL2561_LUX_B7T; m=TSL2561_LUX_M7T; } - else if (ratio > TSL2561_LUX_K8T) - { b=TSL2561_LUX_B8T; m=TSL2561_LUX_M8T; } - break; -#endif - default: - // assert failed - break; - } - - /* Compute illuminance */ - long ill = ((channel_0 * b) - (channel_1 * m)); - if (ill < 0) ill = 0; /* Do not allow negative lux value */ - ill += (1 << (TSL2561_LUX_LUXSCALE-1)); /* Round lsb (2^(LUX_SCALE-1)) */ - ill >>= TSL2561_LUX_LUXSCALE; /* Strip fractional part */ - - /* Signal I2C had no errors */ - return ill; -} - -static inline msg_t -_readChannel(TSL2561_drv *drv, uint16_t *broadband, uint16_t *ir) { - msg_t msg; - if (((msg = i2c_reg_recv16_le( - TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REG_DATA0LOW, - broadband)) < MSG_OK) || - ((msg = i2c_reg_recv16_le( - TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REG_DATA1LOW, - ir )) < MSG_OK)) - return msg; - return MSG_OK; -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -void -TSL2561_init(TSL2561_drv *drv, TSL2561_config *config) { - drv->config = config; - drv->gain = TSL2561_GAIN_1X; - drv->integration_time = TSL2561_INTEGRATIONTIME_LONG; - drv->state = SENSOR_INIT; - - i2c_reg_recv8(TSL2561_COMMAND_BIT | TSL2561_REG_ID, - (uint8_t*)&drv->id); -} - -msg_t -TSL2561_check(TSL2561_drv *drv) { - uint8_t rx; - - msg_t msg; - if ((msg = i2c_reg_recv8(TSL2561_REG_ID, &rx)) < MSG_OK) - return msg; - if (!(rx & 0x0A)) - return SENSOR_NOTFOUND; - return MSG_OK; -} - -msg_t -TSL2561_stop(TSL2561_drv *drv) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx = { TSL2561_COMMAND_BIT | TSL2561_REG_CONTROL, - TSL2561_CONTROL_POWEROFF }; - - return i2c_send((uint8_t*)&tx, sizeof(tx)); -} - -msg_t -TSL2561_start(TSL2561_drv *drv) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx = { TSL2561_COMMAND_BIT | TSL2561_REG_CONTROL, - TSL2561_CONTROL_POWERON }; - - return i2c_send((uint8_t*)&tx, sizeof(tx)); -} - -msg_t -TSL2561_setIntegrationTime(TSL2561_drv *drv, - TSL2561_integration_time_t time) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx = { TSL2561_COMMAND_BIT | TSL2561_REG_TIMING, - (uint8_t)(time | drv->gain) }; - - msg_t msg; - if ((msg = i2c_send((uint8_t*)&tx, sizeof(tx))) < MSG_OK) - return msg; - - drv->integration_time = time; - - return MSG_OK; -} - -msg_t -TSL2561_setGain(TSL2561_drv *drv, - TSL2561_gain_t gain) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx = { TSL2561_COMMAND_BIT | TSL2561_REG_TIMING, - (uint8_t)(drv->integration_time | gain) }; - - msg_t msg; - if ((msg = i2c_send((uint8_t*)&tx, sizeof(tx))) < MSG_OK) - return msg; - - drv->gain = gain; - - return MSG_OK; -} - -unsigned int -TSL2561_getAcquisitionTime(TSL2561_drv *drv) { - switch (drv->integration_time) { - case TSL2561_INTEGRATIONTIME_SHORT: - return CEILING(TSL2561_DELAY_INTTIME_SHORT , 1000); - case TSL2561_INTEGRATIONTIME_MEDIUM: - return CEILING(TSL2561_DELAY_INTTIME_MEDIUM, 1000); - case TSL2561_INTEGRATIONTIME_LONG: - return CEILING(TSL2561_DELAY_INTTIME_LONG , 1000); - } - return -1; -} - - -msg_t -TSL2561_readIlluminance(TSL2561_drv *drv, - unsigned int *illuminance) { - uint16_t broadband; - uint16_t ir; - - /* Read channels */ - msg_t msg; - if ((msg = _readChannel(drv, &broadband, &ir)) < MSG_OK) - return msg; - - /* Calculate illuminance */ - *illuminance = - calculateIlluminance(drv->integration_time, drv->gain, - broadband, ir, drv->id.partno); - /* Ok */ - return SENSOR_OK; -} - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.h b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.h deleted file mode 100644 index 75e7c78..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2561.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - TSL2561 for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file tsl2561.h - * @brief TSL2561 Light sensor interface module header. - * - * @{ - */ - -#ifndef _SENSOR_TSL2561_H_ -#define _SENSOR_TSL2561_H_ - -#include -#include "i2c_helpers.h" -#include "sensor.h" - - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#define TSL2561_CONTINUOUS_ACQUISITION_SUPPORTED TRUE - -#define TSL2561_OVERLOADED (-1) - - -/* I2C address */ -#define TSL2561_I2CADDR_LOW (0x29) -#define TSL2561_I2CADDR_FLOAT (0x39) -#define TSL2561_I2CADDR_HIGH (0x49) - -/** - * @brief Time necessary for the sensor to boot - */ -#define TSL2561_BOOTUP_TIME 0 - -/** - * @brief Time necessary for the sensor to start - */ -#define TSL2561_STARTUP_TIME 0 - - - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -#ifndef TSL2561_WITH_CS -#define TSL2561_WITH_CS 0 -#endif - -#ifndef TSL2561_WITH_T_FN_CL -#define TSL2561_WITH_T_FN_CL 1 -#endif - - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - - -#define TSL2561_I2CADDR_DEFAULT TSL2561_I2CADDR_FLOAT - - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief TSL2561 configuration structure. - */ -typedef struct { - I2CHelper i2c; /* keep it first */ -} TSL2561_config; - -/** - * @brief Available integration time - * - * @details Available integration time are: - * 13.7ms, 101ms, 402ms - */ -typedef enum { - TSL2561_INTEGRATIONTIME_SHORT = 0x00, /**< @brief 13.7ms */ - TSL2561_INTEGRATIONTIME_MEDIUM = 0x01, /**< @brief 101.0ms */ - TSL2561_INTEGRATIONTIME_LONG = 0x02, /**< @brief 402.0ms */ -} TSL2561_integration_time_t; - -/** - * @brief Available gain - * - * @details Available gain are 1x, 16x - */ -typedef enum { - TSL2561_GAIN_1X = 0x00, /**< @brief 1x gain */ - TSL2561_GAIN_16X = 0x10, /**< @brief 16x gain */ -} TSL2561_gain_t; - -/** - * @brief TSL2561 configuration structure. - */ -typedef struct { - TSL2561_config *config; - sensor_state_t state; - TSL2561_gain_t gain; - TSL2561_integration_time_t integration_time; - struct PACKED { - uint8_t revno : 4; - uint8_t partno : 4; } id; -} TSL2561_drv; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** - * @brief Initialize the sensor driver - */ -void -TSL2561_init(TSL2561_drv *drv, - TSL2561_config *config); - -/** - * @brief Start the sensor - */ -msg_t -TSL2561_start(TSL2561_drv *drv); - -/** - * @brief Stop the sensor - * - * @details If the sensor support it, it will be put in low energy mode. - */ -msg_t -TSL2561_stop(TSL2561_drv *drv); - -/** - * @brief Check that the sensor is really present - */ -msg_t -TSL2561_check(TSL2561_drv *drv); - -/** - * @brief Time in milli-seconds necessary for acquiring a naw measure - * - * @returns - * unsigned int time in millis-seconds - */ -unsigned int -TSL2561_getAcquisitionTime(TSL2561_drv *drv); - -/** - * @brief Trigger a mesure acquisition - */ -static inline msg_t -TSL2561_startMeasure(TSL2561_drv *drv) { - (void)drv; - return MSG_OK; -}; - -/** - * @brief Read the newly acquiered measure - * - * @note According the the sensor design the measure read - * can be any value acquired after the acquisition time - * and the call to readMeasure. - */ -msg_t -TSL2561_readMeasure(TSL2561_drv *drv, - unsigned int illuminance); - -msg_t -TSL2561_setGain(TSL2561_drv *drv, - TSL2561_gain_t gain); - -msg_t -TSL2561_setIntegrationTime(TSL2561_drv *drv, - TSL2561_integration_time_t time); - -/** - * @brief Read temperature and humidity - * - * @details According to the sensor specification/configuration - * (see #TSL2561_CONTINUOUS_ACQUISITION_SUPPORTED), - * if the sensor is doing continuous measurement - * it's value will be requested and returned immediately. - * Otherwise a measure is started, the necessary amount of - * time for acquiring the value is spend sleeping (not spinning), - * and finally the measure is read. - * - * @note In continuous measurement mode, if you just started - * the sensor, you will need to wait getAcquisitionTime() - * in addition to the usual getStartupTime() - - * @note If using several sensors, it is better to start all the - * measure together, wait for the sensor having the longuest - * aquisition time, and finally read all the values - */ -msg_t -TSL2561_readIlluminance(TSL2561_drv *drv, - unsigned int *illuminance); - -/** - * @brief Return the illuminance value in Lux - * - * @details Use readIlluminance() for returning the humidity value. - * - * @note Prefere readIlluminance()if you need better error handling. - * - * @return Illuminance in Lux - * @retval unsigned int illuminace value - * @retval -1 on failure - */ -static inline unsigned int -TSL2561_getIlluminance(TSL2561_drv *drv) { - unsigned int illuminance = -1; - TSL2561_readIlluminance(drv, &illuminance); - return illuminance; -} - - -#endif - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.c b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.c deleted file mode 100644 index c0bbee0..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - TSL2591 for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * - * DOC: http://ams.com/eng/content/download/389383/1251117/221235 - */ - -#define I2C_HELPERS_AUTOMATIC_DRV TRUE - -#include "hal.h" -#include "i2c_helpers.h" -#include "tsl2591.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#define TSL2591_LUX_DF (408.0F) -#define TSL2591_LUX_COEFB (1.64F) // CH0 coefficient -#define TSL2591_LUX_COEFC (0.59F) // CH1 coefficient A -#define TSL2591_LUX_COEFD (0.86F) // CH2 coefficient B - -/* I2C registers */ -#define TSL2591_REG_ENABLE 0x00 -#define TSL2591_REG_CONFIG 0x01 /**< @brief gain and integration */ -#define TSL2591_REG_AILTL 0x04 -#define TSL2591_REG_AILTH 0x05 -#define TSL2591_REG_AIHTL 0x06 -#define TSL2591_REG_AIHTH 0x07 -#define TSL2591_REG_NPAILTL 0x08 -#define TSL2591_REG_NPAILTH 0x09 -#define TSL2591_REG_NPAIHTL 0x0A -#define TSL2591_REG_NPAIHTH 0x0B -#define TSL2591_REG_PERSIST 0x0C -#define TSL2591_REG_PID 0x11 /**< @brief Package ID */ -#define TSL2591_REG_ID 0x12 /**< @brief Device ID */ -#define TSL2591_REG_STATUS 0x13 /**< @brief Device status */ -#define TSL2591_REG_C0DATAL 0x14 /**< @brief CH0 ADC low data byte */ -#define TSL2591_REG_C0DATAH 0x15 /**< @brief CH0 ADC high data byte */ -#define TSL2591_REG_C1DATAL 0x16 /**< @brief CH1 ADC low data byte */ -#define TSL2591_REG_C1DATAH 0x17 /**< @brief CH1 ADC high data byte */ - -#define TSL2591_REG_COMMAND 0x80 /**< @brief Select command register */ -#define TSL2591_REG_NORMAL 0x20 /**< @brief Normal opearation */ -#define TSL2591_REG_SPECIAL 0x60 /**< @brief Special function */ - -#define TSL2591_ID_TSL2591 0x50 - -#define TSL2591_VISIBLE (2) // channel 0 - channel 1 -#define TSL2591_INFRARED (1) // channel 1 -#define TSL2591_FULLSPECTRUM (0) // channel 0 - -#define TSL2591_ENABLE_POWERON (0x01) -#define TSL2591_ENABLE_POWEROFF (0x00) -#define TSL2591_ENABLE_AEN (0x02) -#define TSL2591_ENABLE_AIEN (0x10) - -#define TSL2591_CONTROL_RESET (0x80) - - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static inline uint32_t -calculateIlluminance(TSL2591_integration_time_t integration_time, - TSL2591_gain_t gain, - uint16_t broadband, uint16_t ir) { - uint16_t atime, again; - - /* Check for overflow conditions first */ - if ((broadband == 0xFFFF) | (ir == 0xFFFF)) { - return 0xFFFFFFFF; /* Signal overflow */ - } - - switch (integration_time) { - case TSL2591_INTEGRATIONTIME_100MS : atime = 100; break; - case TSL2591_INTEGRATIONTIME_200MS : atime = 200; break; - case TSL2591_INTEGRATIONTIME_300MS : atime = 300; break; - case TSL2591_INTEGRATIONTIME_400MS : atime = 400; break; - case TSL2591_INTEGRATIONTIME_500MS : atime = 500; break; - case TSL2591_INTEGRATIONTIME_600MS : atime = 600; break; - } - - switch (gain) { - case TSL2591_GAIN_1X : again = 1; break; - case TSL2591_GAIN_25X : again = 25; break; - case TSL2591_GAIN_415X : again = 415; break; - case TSL2591_GAIN_10000X : again = 10000; break; - } - - // cpl = (ATIME * AGAIN) / DF - float cpl = ((float)(atime * again)) / ((float)TSL2591_LUX_DF); - float lux1 = ( ((float)broadband) - (TSL2591_LUX_COEFB * (float)ir) ) / cpl; - float lux2 = ( (TSL2591_LUX_COEFC * (float)broadband) - - (TSL2591_LUX_COEFD * (float)ir ) ) / cpl; - - return (uint32_t) (lux1 > lux2 ? lux1 : lux2); -} - -static inline msg_t -_readChannel(TSL2591_drv *drv, uint16_t *broadband, uint16_t *ir) { - msg_t msg; - if (((msg = i2c_reg_recv16_le( - TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_C0DATAL, - broadband)) < MSG_OK) || - ((msg = i2c_reg_recv16_le( - TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_C1DATAL, - ir )) < MSG_OK)) - return msg; - - return MSG_OK; -} - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -void -TSL2591_init(TSL2591_drv *drv, TSL2591_config *config) { - drv->config = config; - drv->gain = TSL2591_GAIN_1X; - drv->integration_time = TSL2591_INTEGRATIONTIME_100MS; - drv->state = SENSOR_INIT; -} - -msg_t -TSL2591_check(TSL2591_drv *drv) { - uint8_t id; - - msg_t msg; - if ((msg = i2c_reg_recv8(TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | - TSL2591_REG_ID, &id)) < MSG_OK) - return msg; - - if (id != TSL2591_ID_TSL2591) - return SENSOR_NOTFOUND; - - return MSG_OK; -} - -msg_t -TSL2591_start(TSL2591_drv *drv) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx_config = { - TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_CONFIG, - (uint8_t)(drv->integration_time | drv->gain) }; - - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx_start = { - TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_ENABLE, - TSL2591_ENABLE_POWERON }; - - msg_t msg; - - if (((msg = i2c_send((uint8_t*)&tx_config, sizeof(tx_config))) < MSG_OK) || - ((msg = i2c_send((uint8_t*)&tx_start, sizeof(tx_start ))) < MSG_OK)) { - drv->state = SENSOR_ERROR; - return msg; - } - - drv->state = SENSOR_STARTED; - return MSG_OK; -} - -msg_t -TSL2591_stop(TSL2591_drv *drv) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx_stop = { - TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_ENABLE, - TSL2591_ENABLE_POWEROFF }; - - return i2c_send((uint8_t*)&tx_stop, sizeof(tx_stop)); -} - -msg_t -TSL2591_setIntegrationTime(TSL2591_drv *drv, - TSL2591_integration_time_t time) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx = { TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_CONFIG, - (uint8_t)(time | drv->gain) }; - - msg_t msg; - if ((msg = i2c_send((uint8_t*)&tx, sizeof(tx))) < MSG_OK) - return msg; - - drv->integration_time = time; - - return MSG_OK; -} - -msg_t -TSL2591_setGain(TSL2591_drv *drv, - TSL2591_gain_t gain) { - struct __attribute__((packed)) { - uint8_t reg; - uint8_t conf; - } tx = { TSL2591_REG_COMMAND | TSL2591_REG_NORMAL | TSL2591_REG_CONFIG, - (uint8_t)(drv->integration_time | gain) }; - - msg_t msg; - if ((msg = i2c_send((uint8_t*)&tx, sizeof(tx))) < MSG_OK) - return msg; - - drv->gain = gain; - - return MSG_OK; -} - -unsigned int -TSL2591_getAcquisitionTime(TSL2591_drv *drv) { - switch (drv->integration_time) { - case TSL2591_INTEGRATIONTIME_100MS : return 100; - case TSL2591_INTEGRATIONTIME_200MS : return 200; - case TSL2591_INTEGRATIONTIME_300MS : return 300; - case TSL2591_INTEGRATIONTIME_400MS : return 400; - case TSL2591_INTEGRATIONTIME_500MS : return 500; - case TSL2591_INTEGRATIONTIME_600MS : return 600; - } - return -1; -} - - -msg_t -TSL2591_readIlluminance(TSL2591_drv *drv, - unsigned int *illuminance) { - uint16_t broadband; - uint16_t ir; - - /* Read channels */ - msg_t msg; - if ((msg = _readChannel(drv, &broadband, &ir)) < MSG_OK) - return msg; - - /* Calculate illuminance */ - *illuminance = - calculateIlluminance(drv->integration_time, drv->gain, - broadband, ir); - /* Ok */ - return SENSOR_OK; -} - diff --git a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.h b/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.h deleted file mode 100644 index 8320eb8..0000000 --- a/ChibiOS_16.1.5/community/os/various/devices_lib/sensors/tsl2591.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - TSL2591 for ChibiOS/RT - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file tsl2591.h - * @brief TSL2591 Light sensor interface module header. - * - * @{ - */ - -#ifndef _SENSOR_TSL2591_H_ -#define _SENSOR_TSL2591_H_ - -#include -#include "i2c_helpers.h" -#include "sensor.h" - - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Device sensor continuous acquisition support. - */ -#define TSL2591_CONTINUOUS_ACQUISITION_SUPPORTED TRUE - -/** - * @brief I2C address. - */ -#define TSL2591_I2CADDR_FIXED 0x29 - -/** - * @brief Time necessary for the sensor to boot - */ -#define TSL2591_BOOTUP_TIME 0 - -/** - * @brief Time necessary for the sensor to start - */ -#define TSL2591_STARTUP_TIME 0 - - - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/** - * @brief Default I2C address (when pin unconfigured) - */ -#define TSL2591_I2CADDR_DEFAULT TSL2591_I2CADDR_FIXED - - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief TSL2591 configuration structure. - */ -typedef struct { - I2CHelper i2c; /* keep it first */ -} TSL2591_config; - -/** - * @brief Available integration time - * - * @details Available integration time are: - * 100ms, 200ms, 300ms, 400ms, 500ms and 600ms - */ -typedef enum { - TSL2591_INTEGRATIONTIME_100MS = 0x00, /**< @brief 100ms */ - TSL2591_INTEGRATIONTIME_200MS = 0x01, /**< @brief 200ms */ - TSL2591_INTEGRATIONTIME_300MS = 0x02, /**< @brief 300ms */ - TSL2591_INTEGRATIONTIME_400MS = 0x03, /**< @brief 400ms */ - TSL2591_INTEGRATIONTIME_500MS = 0x04, /**< @brief 500ms */ - TSL2591_INTEGRATIONTIME_600MS = 0x05, /**< @brief 600ms */ -} TSL2591_integration_time_t; - -/** - * @brief Available gain - * - * @details Available gain are 1x, 25x, 415x, 10000x - */ -typedef enum { - TSL2591_GAIN_1X = 0x00, /**< @brief 1x gain */ - TSL2591_GAIN_25X = 0x10, /**< @brief 25x gain */ - TSL2591_GAIN_415X = 0x20, /**< @brief 415x gain */ - TSL2591_GAIN_10000X = 0x30, /**< @brief 10000x gain */ -} TSL2591_gain_t; - -/** - * @brief TSL2591 configuration structure. - */ -typedef struct { - TSL2591_config *config; - sensor_state_t state; - TSL2591_gain_t gain; - TSL2591_integration_time_t integration_time; -} TSL2591_drv; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** - * @brief Initialize the sensor driver - */ -void -TSL2591_init(TSL2591_drv *drv, - TSL2591_config *config); - -/** - * @brief Start the sensor - */ -msg_t -TSL2591_start(TSL2591_drv *drv); - -/** - * @brief Stop the sensor - * - * @details If the sensor support it, it will be put in low energy mode. - */ -msg_t -TSL2591_stop(TSL2591_drv *drv); - -/** - * @brief Check that the sensor is really present - */ -msg_t -TSL2591_check(TSL2591_drv *drv); - -/** - * @brief Time in milli-seconds necessary for acquiring a naw measure - * - * @returns - * unsigned int time in millis-seconds - */ -unsigned int -TSL2591_getAcquisitionTime(TSL2591_drv *drv); - -/** - * @brief Trigger a mesure acquisition - */ -static inline msg_t -TSL2591_startMeasure(TSL2591_drv *drv) { - (void)drv; - return MSG_OK; -}; - - -msg_t -TSL2591_setGain(TSL2591_drv *drv, - TSL2591_gain_t gain); - -msg_t -TSL2591_setIntegrationTime(TSL2591_drv *drv, - TSL2591_integration_time_t time); - -/** - * @brief Read the newly acquiered measure - * - * @note According the the sensor design the measure read - * can be any value acquired after the acquisition time - * and the call to readMeasure. - */ -msg_t -TSL2591_readMeasure(TSL2591_drv *drv, - unsigned int illuminance); - - -/** - * @brief Read temperature and humidity - * - * @details According to the sensor specification/configuration - * (see #TSL2591_CONTINUOUS_ACQUISITION_SUPPORTED), - * if the sensor is doing continuous measurement - * it's value will be requested and returned immediately. - * Otherwise a measure is started, the necessary amount of - * time for acquiring the value is spend sleeping (not spinning), - * and finally the measure is read. - * - * @note In continuous measurement mode, if you just started - * the sensor, you will need to wait getAcquisitionTime() - * in addition to the usual getStartupTime() - - * @note If using several sensors, it is better to start all the - * measure together, wait for the sensor having the longuest - * aquisition time, and finally read all the values - */ -msg_t -TSL2591_readIlluminance(TSL2591_drv *drv, - unsigned int *illuminance); - -/** - * @brief Return the illuminance value in Lux - * - * @details Use readIlluminance() for returning the humidity value. - * - * @note Prefere readIlluminance()if you need better error handling. - * - * @return Illuminance in Lux - * @retval unsigned int illuminace value - * @retval -1 on failure - */ -static inline unsigned int -TSL2591_getIlluminance(TSL2591_drv *drv) { - unsigned int illuminance = -1; - TSL2591_readIlluminance(drv, &illuminance); - return illuminance; -} - - -#endif - diff --git a/ChibiOS_16.1.5/community/os/various/gdb.mk b/ChibiOS_16.1.5/community/os/various/gdb.mk deleted file mode 100644 index aa636a8..0000000 --- a/ChibiOS_16.1.5/community/os/various/gdb.mk +++ /dev/null @@ -1,13 +0,0 @@ -GDB ?= arm-none-eabi-gdb -GDB_PROGRAM ?= $(BUILDDIR)/$(PROJECT).elf -GDB_PORT ?= 2331 -GDB_START_ADDRESS ?= 0 -GDB_BREAK ?= main - -gdb-debug: - printf "target remote localhost:$(GDB_PORT)\nmem $(GDB_START_ADDRESS) 0\nbreak $(GDB_BREAK)\nload\nmon reset\ncontinue" > .gdbinit - $(GDB) --command=.gdbinit $(GDB_PROGRAM) - - - -.PHONY: gdb-debug diff --git a/ChibiOS_16.1.5/community/os/various/i2c_helpers.h b/ChibiOS_16.1.5/community/os/various/i2c_helpers.h deleted file mode 100644 index 4b57174..0000000 --- a/ChibiOS_16.1.5/community/os/various/i2c_helpers.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef I2C_HELPERS_H -#define I2C_HELPERS_H - -#include "hal.h" -#include "bswap.h" - - -typedef struct { - /** - * @brief Pointer to the I2C driver. - */ - I2CDriver *driver; - /** - * @brief I2C address. - */ - i2caddr_t addr; -} I2CHelper; - - - -#if !defined(I2C_HELPERS_AUTOMATIC_DRV) || (I2C_HELPERS_AUTOMATIC_DRV == FALSE) - -#define i2c_send(i2c, txbuf, txbytes) \ - _i2c_send(i2c, txbuf, txbytes) -#define i2c_transmit(i2c, txbuf, txbytes, rxbuf, rxbytes) \ - _i2c_transmit(i2c, txbuf, txbytes, rxbuf, rxbytes) -#define i2c_receive(i2, rxbuf, rxbytes) \ - _i2c_receive(i2c, rxbuf, rxbytes) - -#define i2c_send_timeout(i2c, txbuf, txbytes) \ - _i2c_send(i2c, txbuf, txbytes) -#define i2c_transmit_timeout(i2c, txbuf, txbytes, rxbuf, rxbytes) \ - _i2c_transmit(i2c, txbuf, txbytes, rxbuf, rxbytes) -#define i2c_receive_timeout(i2, rxbuf, rxbytes) \ - _i2c_receive(i2c, rxbuf, rxbytes) - -#define i2c_reg(i2c, reg) \ - _i2c_reg(i2c, reg) - -#define i2c_reg_recv8(i2c, reg, val) \ - _i2c_reg_recv8(i2c, reg, val) -#define i2c_reg_recv16(i2c, reg, val) \ - _i2c_reg_recv16(i2c, reg, val) -#define i2c_reg_recv16_le(i2c, reg, val) \ - _i2c_reg_recv16_le(i2c, reg, val) -#define i2c_reg_recv16_be(i2c, reg, val) \ - _i2c_reg_recv16_be(i2c, reg, val) -#define i2c_reg_recv32(i2c, reg, val) \ - _i2c_reg_recv32(i2c, reg, val) -#define i2c_reg_recv32_le(i2c, reg, val) \ - _i2c_reg_recv32_le(i2c, reg, val) -#define i2c_reg_recv32_be(i2c, reg, val) \ - _i2c_reg_recv32_be(i2c, reg, val) - -#define i2c_recv8(i2c, val) \ - _i2c_recv8(i2c, val) -#define i2c_recv16(i2c, val) \ - _i2c_recv16(i2c, val) -#define i2c_recv16_le(i2c, val) \ - _i2c_recv16_le(i2c, val) -#define i2c_recv16_be(i2c, val) \ - _i2c_recv16_be(i2c, val) -#define i2c_recv32(i2c, val) \ - _i2c_recv32(i2c, val) -#define i2c_recv32_le(i2c, val) \ - _i2c_recv32_le(i2c, val) -#define i2c_recv32_be(i2c, val) \ - _i2c_recv32_be(i2c, val) - -#else - -#define i2c_send(txbuf, txbytes) \ - _i2c_send(&drv->config->i2c, txbuf, txbytes) -#define i2c_transmit(txbuf, txbytes, rxbuf, rxbytes) \ - _i2c_transmit(&drv->config->i2c, txbuf, txbytes, rxbuf, rxbytes) -#define i2c_receive(rxbuf, rxbytes) \ - _i2c_receive(&drv->config->i2c, rxbuf, rxbytes) - -#define i2c_send_timeout(txbuf, txbytes) \ - _i2c_send(&drv->config->i2c, txbuf, txbytes) -#define i2c_transmit_timeout(txbuf, txbytes, rxbuf, rxbytes) \ - _i2c_transmit(&drv->config->i2c, txbuf, txbytes, rxbuf, rxbytes) -#define i2c_receive_timeout(rxbuf, rxbytes) \ - _i2c_receive(&drv->config->i2c, rxbuf, rxbytes) - - -#define i2c_reg(reg) \ - _i2c_reg(&drv->config->i2c, reg) - -#define i2c_reg_recv8(reg, val) \ - _i2c_reg_recv8(&drv->config->i2c, reg, val) -#define i2c_reg_recv16(reg, val) \ - _i2c_reg_recv16(&drv->config->i2c, reg, val) -#define i2c_reg_recv16_le(reg, val) \ - _i2c_reg_recv16_le(&drv->config->i2c, reg, val) -#define i2c_reg_recv16_be(reg, val) \ - _i2c_reg_recv16_be(&drv->config->i2c, reg, val) -#define i2c_reg_recv32(reg, val) \ - _i2c_reg_recv32(&drv->config->i2c, reg, val) -#define i2c_reg_recv32_le(reg, val) \ - _i2c_reg_recv32_le(&drv->config->i2c, reg, val) -#define i2c_reg_recv32_be(reg, val) \ - _i2c_reg_recv32_be(&drv->config->i2c, reg, val) - -#define i2c_recv8(val) \ - _i2c_recv8(&drv->config->i2c, val) -#define i2c_recv16(val) \ - _i2c_recv16(&drv->config->i2c, val) -#define i2c_recv16_le(val) \ - _i2c_recv16_le(&drv->config->i2c, val) -#define i2c_recv16_be(val) \ - _i2c_recv16_be(&drv->config->i2c, val) -#define i2c_recv32(val) \ - _i2c_recv32(&drv->config->i2c, val) -#define i2c_recv32_le(val) \ - _i2c_recv32_le(&drv->config->i2c, val) -#define i2c_recv32_be(val) \ - _i2c_recv32_be(&drv->config->i2c, val) - -#endif - - - - - -static inline msg_t -_i2c_send(I2CHelper *i2c, const uint8_t *txbuf, size_t txbytes) { - return i2cMasterTransmitTimeout(i2c->driver, i2c->addr, - txbuf, txbytes, NULL, 0, TIME_INFINITE); -}; - -static inline msg_t -_i2c_transmit(I2CHelper *i2c, const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes) { - return i2cMasterTransmitTimeout(i2c->driver, i2c->addr, - txbuf, txbytes, rxbuf, rxbytes, TIME_INFINITE); -} - -static inline msg_t -_i2c_receive(I2CHelper *i2c, uint8_t *rxbuf, size_t rxbytes) { - return i2cMasterReceiveTimeout(i2c->driver, i2c->addr, - rxbuf, rxbytes, TIME_INFINITE); -}; - - - -static inline msg_t -_i2c_send_timeout(I2CHelper *i2c, const uint8_t *txbuf, size_t txbytes, - systime_t timeout) { - return i2cMasterTransmitTimeout(i2c->driver, i2c->addr, - txbuf, txbytes, NULL, 0, timeout); -}; - -static inline msg_t -_i2c_transmit_timeout(I2CHelper *i2c, const uint8_t *txbuf, size_t txbytes, - uint8_t *rxbuf, size_t rxbytes, systime_t timeout) { - return i2cMasterTransmitTimeout(i2c->driver, i2c->addr, - txbuf, txbytes, rxbuf, rxbytes, timeout); -} - -static inline msg_t -_i2c_receive_timeout(I2CHelper *i2c, uint8_t *rxbuf, size_t rxbytes, systime_t timeout) { - return i2cMasterReceiveTimeout(i2c->driver, i2c->addr, - rxbuf, rxbytes, timeout); -}; - - -/*======================================================================*/ - - -static inline msg_t -_i2c_reg(I2CHelper *i2c, uint8_t reg) { - return _i2c_transmit(i2c, ®, sizeof(reg), NULL, 0); -}; - -/*======================================================================*/ - -static inline msg_t -_i2c_reg_recv8(I2CHelper *i2c, uint8_t reg, uint8_t *val) { - return _i2c_transmit(i2c, ®, sizeof(reg), (uint8_t*)val, sizeof(val)); -}; - -static inline msg_t -_i2c_reg_recv16(I2CHelper *i2c, uint8_t reg, uint16_t *val) { - return _i2c_transmit(i2c, ®, sizeof(reg), (uint8_t*)val, sizeof(val)); -}; - -static inline msg_t -_i2c_reg_recv16_le(I2CHelper *i2c, uint8_t reg, uint16_t *val) { - int msg = _i2c_reg_recv16(i2c, reg, val); - if (msg >= 0) *val = le16_to_cpu(*val); - return msg; -}; - -static inline msg_t -_i2c_reg_recv16_be(I2CHelper *i2c, uint8_t reg, uint16_t *val) { - int msg = _i2c_reg_recv16(i2c, reg, val); - if (msg >= 0) *val = be16_to_cpu(*val); - return msg; -}; - -static inline msg_t -_i2c_reg_recv32(I2CHelper *i2c, uint8_t reg, uint32_t *val) { - return _i2c_transmit(i2c, ®, sizeof(reg), (uint8_t*)val, sizeof(val)); -}; - -static inline msg_t -_i2c_reg_recv32_le(I2CHelper *i2c, uint8_t reg, uint32_t *val) { - int msg = _i2c_reg_recv32(i2c, reg, val); - if (msg >= 0) *val = le32_to_cpu(*val); - return msg; -}; - -static inline msg_t -_i2c_reg_recv32_be(I2CHelper *i2c, uint8_t reg, uint32_t *val) { - int msg = _i2c_reg_recv32(i2c, reg, val); - if (msg >= 0) *val = be32_to_cpu(*val); - return msg; -}; - - -/*======================================================================*/ - -static inline msg_t -_i2c_recv8(I2CHelper *i2c, uint8_t *val) { - return _i2c_receive(i2c, (uint8_t*)val, sizeof(val)); -}; - -static inline msg_t -_i2c_recv16(I2CHelper *i2c, uint16_t *val) { - return _i2c_receive(i2c, (uint8_t*)val, sizeof(val)); -}; - -static inline msg_t -_i2c_recv16_le(I2CHelper *i2c, uint16_t *val) { - int msg = _i2c_recv16(i2c, val); - if (msg >= 0) *val = le16_to_cpu(*val); - return msg; -}; - -static inline msg_t -_i2c_recv16_be(I2CHelper *i2c, uint16_t *val) { - int msg = _i2c_recv16(i2c, val); - if (msg >= 0) *val = be16_to_cpu(*val); - return msg; -}; - -static inline msg_t -_i2c_recv32(I2CHelper *i2c, uint32_t *val) { - return _i2c_receive(i2c, (uint8_t*)val, sizeof(val)); -}; - -static inline msg_t -_i2c_recv32_le(I2CHelper *i2c, uint32_t *val) { - int msg = _i2c_recv32(i2c, val); - if (msg >= 0) *val = le32_to_cpu(*val); - return msg; -}; - -static inline msg_t -_i2c_recv32_be(I2CHelper *i2c, uint32_t *val) { - int msg = _i2c_recv32(i2c, val); - if (msg >= 0) *val = be32_to_cpu(*val); - return msg; -}; - -#endif diff --git a/ChibiOS_16.1.5/community/os/various/jlink.mk b/ChibiOS_16.1.5/community/os/various/jlink.mk deleted file mode 100644 index 1a13bd3..0000000 --- a/ChibiOS_16.1.5/community/os/various/jlink.mk +++ /dev/null @@ -1,33 +0,0 @@ -JLINK ?= JLinkExe -JLINK_GDB_SERVER ?= JLinkGDBServer -JLINK_GDB_PORT ?= 2331 -JLINK_IF ?= swd -JLINK_SPEED ?= 2000 -JLINK_START_ADDRESS ?= 0 -JLINK_BURN ?= $(BUILDDIR)/$(PROJECT).bin -JLINK_COMMON_OPTS ?= -device $(JLINK_DEVICE) -if $(JLINK_IF) -speed $(JLINK_SPEED) - -jlink-flash: - printf "$(JLINK_PRE_FLASH)\nloadbin $(JLINK_BURN) $(JLINK_START_ADDRESS)\nverifybin $(JLINK_BURN) $(JLINK_START_ADDRESS)\nr\ng\nexit\n" > $(BUILDDIR)/flash.jlink - $(JLINK) $(JLINK_COMMON_OPTS) $(BUILDDIR)/flash.jlink - -ifneq ($(SOFTDEVICE),) -jlink-flash-softdevice: - printf "w4 4001e504 1\nloadbin $(NRF51SDK)/components/softdevice/$(SOFTDEVICE)/hex/$(SOFTDEVICE)_nrf51_$(SOFTDEVICE_RELEASE)_softdevice.hex 0\nr\ng\nexit\n" > $(BUILDDIR)/flash.softdevice.jlink - $(JLINK) $(JLINK_COMMON_OPTS) $(BUILDDIR)/flash.softdevice.jlink -endif - -ifneq ($(JLINK_ERASE_ALL),) -jlink-erase-all: - printf "$(JLINK_ERASE_ALL)\nr\nexit\n" > $(BUILDDIR)/erase-all.jlink - $(JLINK) $(JLINK_COMMON_OPTS) $(BUILDDIR)/erase-all.jlink -endif - -jlink-reset: - printf "r\nexit\n" > $(BUILDDIR)/reset.jlink - $(JLINK) $(JLINK_COMMON_OPTS) $(BUILDDIR)/reset.jlink - -jlink-debug-server: - $(JLINK_GDB_SERVER) $(JLINK_COMMON_OPTS) -port $(JLINK_GDB_PORT) - -.PHONY: jlink-flash jlink-flash-softdevice jlink-erase-all jlink-reset jlink-debug-server diff --git a/ChibiOS_16.1.5/community/os/various/memtest.cpp b/ChibiOS_16.1.5/community/os/various/memtest.cpp deleted file mode 100644 index b924308..0000000 --- a/ChibiOS_16.1.5/community/os/various/memtest.cpp +++ /dev/null @@ -1,310 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include -#include -#include - -#include "memtest.h" - -static unsigned int prng_seed = 42; - -/* - * - */ -template -class Generator { -public: - Generator(void) : pattern(0) {;} - virtual T get(void) = 0; - virtual testtype get_type(void) = 0; - virtual void init(T seed) { - pattern = seed; - } -protected: - T pattern; -}; - -/* - * - */ -template -class GeneratorWalkingOne : public Generator { - T get(void) { - T ret = this->pattern; - - this->pattern <<= 1; - if (0 == this->pattern) - this->pattern = 1; - - return ret; - } - - testtype get_type(void) { - return MEMTEST_WALKING_ONE; - } -}; - -/* - * - */ -template -class GeneratorWalkingZero : public Generator { - T get(void) { - T ret = ~this->pattern; - - this->pattern <<= 1; - if (0 == this->pattern) - this->pattern = 1; - - return ret; - } - - testtype get_type(void) { - return MEMTEST_WALKING_ZERO; - } -}; - -/* - * - */ -template -class GeneratorOwnAddress : public Generator { - T get(void) { - T ret = this->pattern; - this->pattern++; - return ret; - } - - testtype get_type(void) { - return MEMTEST_OWN_ADDRESS; - } -}; - -/* - * - */ -template -class GeneratorMovingInv : public Generator { - T get(void) { - T ret = this->pattern; - this->pattern = ~this->pattern; - return ret; - } - - testtype get_type(void) { - if ((this->pattern == 0) || ((this->pattern & 0xFF) == 0xFF)) - return MEMTEST_MOVING_INVERSION_ZERO; - else - return MEMTEST_MOVING_INVERSION_55AA; - } -}; - -/* - * - */ -template -class GeneratorMovingInvRand : public Generator { -public: - GeneratorMovingInvRand(void) : step(0), prev(0){;} - void init(T seed) { - srand(seed); - step = 0; - prev = 0; - } - - T get(void) { - T ret; - - if ((step & 1) == 0) { - ret = 0; - ret |= rand(); - // for uint64_t we need to call rand() twice - if (8 == sizeof(T)) { - // multiplication used instead of 32 bit shift for warning avoidance - ret *= 0x100000000; - ret |= rand(); - } - prev = ret; - } - else { - ret = ~prev; - } - step++; - - return ret; - } - - testtype get_type(void) { - return MEMTEST_MOVING_INVERSION_RAND; - } - -private: - size_t step; - T prev; -}; - -/* - * - */ -template -static void memtest_sequential(memtest_t *testp, Generator &generator, T seed) { - const size_t steps = testp->size / sizeof(T); - size_t i; - T *mem = static_cast(testp->start); - T got; - T expect; - - /* fill ram */ - generator.init(seed); - for (i=0; ierrcb)) { - testp->errcb(testp, generator.get_type(), i, sizeof(T), got, expect); - return; - } - } -} - -template -static void walking_one(memtest_t *testp) { - GeneratorWalkingOne generator; - memtest_sequential(testp, generator, 1); -} - -template -static void walking_zero(memtest_t *testp) { - GeneratorWalkingZero generator; - memtest_sequential(testp, generator, 1); -} - -template -static void own_address(memtest_t *testp) { - GeneratorOwnAddress generator; - memtest_sequential(testp, generator, 0); -} - -template -static void moving_inversion_zero(memtest_t *testp) { - GeneratorMovingInv generator; - T seed; - seed = 0; - memtest_sequential(testp, generator, seed); - seed = ~seed; - memtest_sequential(testp, generator, seed); -} - -template -static void moving_inversion_55aa(memtest_t *testp) { - GeneratorMovingInv generator; - T seed; - memset(&seed, 0x55, sizeof(seed)); - memtest_sequential(testp, generator, seed); - seed = ~seed; - memtest_sequential(testp, generator, seed); -} - -template -static void moving_inversion_rand(memtest_t *testp) { - GeneratorMovingInvRand generator; - T mask = -1; - prng_seed++; - memtest_sequential(testp, generator, prng_seed & mask); -} - -/* - * - */ -static void memtest_wrapper(memtest_t *testp, - void (*p_u8) (memtest_t *testp), - void (*p_u16)(memtest_t *testp), - void (*p_u32)(memtest_t *testp), - void (*p_u64)(memtest_t *testp)) { - - if (testp->width_mask & MEMTEST_WIDTH_8) - p_u8(testp); - - if (testp->width_mask & MEMTEST_WIDTH_16) - p_u16(testp); - - if (testp->width_mask & MEMTEST_WIDTH_32) - p_u32(testp); - - if (testp->width_mask & MEMTEST_WIDTH_64) - p_u64(testp); -} - -/* - * - */ -void memtest_run(memtest_t *testp, uint32_t testmask) { - - if (testmask & MEMTEST_WALKING_ONE) { - memtest_wrapper(testp, - walking_one, - walking_one, - walking_one, - walking_one); - } - - if (testmask & MEMTEST_WALKING_ZERO) { - memtest_wrapper(testp, - walking_zero, - walking_zero, - walking_zero, - walking_zero); - } - - if (testmask & MEMTEST_OWN_ADDRESS) { - memtest_wrapper(testp, - own_address, - own_address, - own_address, - own_address); - } - - if (testmask & MEMTEST_MOVING_INVERSION_ZERO) { - memtest_wrapper(testp, - moving_inversion_zero, - moving_inversion_zero, - moving_inversion_zero, - moving_inversion_zero); - } - - if (testmask & MEMTEST_MOVING_INVERSION_55AA) { - memtest_wrapper(testp, - moving_inversion_55aa, - moving_inversion_55aa, - moving_inversion_55aa, - moving_inversion_55aa); - } - - if (testmask & MEMTEST_MOVING_INVERSION_RAND) { - memtest_wrapper(testp, - moving_inversion_rand, - moving_inversion_rand, - moving_inversion_rand, - moving_inversion_rand); - } -} - diff --git a/ChibiOS_16.1.5/community/os/various/memtest.h b/ChibiOS_16.1.5/community/os/various/memtest.h deleted file mode 100644 index 9c31b54..0000000 --- a/ChibiOS_16.1.5/community/os/various/memtest.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MEMTEST_H_ -#define MEMTEST_H_ - -/* - * Memtest types - */ -#define MEMTEST_WALKING_ONE (1 << 0) -#define MEMTEST_WALKING_ZERO (1 << 1) -#define MEMTEST_OWN_ADDRESS (1 << 2) -#define MEMTEST_MOVING_INVERSION_ZERO (1 << 3) -#define MEMTEST_MOVING_INVERSION_55AA (1 << 4) -#define MEMTEST_MOVING_INVERSION_RAND (1 << 5) - -/* - * combined types for convenient - */ -#define MEMTEST_RUN_ALL (MEMTEST_WALKING_ONE | \ - MEMTEST_WALKING_ZERO | \ - MEMTEST_OWN_ADDRESS | \ - MEMTEST_MOVING_INVERSION_ZERO | \ - MEMTEST_MOVING_INVERSION_55AA | \ - MEMTEST_MOVING_INVERSION_RAND) - -/* - * Memtest data widths - */ -#define MEMTEST_WIDTH_8 (1 << 0) -#define MEMTEST_WIDTH_16 (1 << 1) -#define MEMTEST_WIDTH_32 (1 << 2) -#define MEMTEST_WIDTH_64 (1 << 3) - -typedef struct memtest_t memtest_t; -typedef uint32_t testtype; - -/* - * Error call back. - */ -typedef void (*memtestecb_t)(memtest_t *testp, testtype type, size_t index, - size_t current_width, uint32_t got, uint32_t expect); - -/* - * - */ -struct memtest_t { - /* - * Pointer to the test area start. Must be word aligned. - */ - void *start; - /* - * Test area size in bytes. - */ - size_t size; - /* - * Allowable data widths mask. - */ - uint32_t width_mask; - /* - * Error callback pointer. Set to NULL if unused. - */ - memtestecb_t errcb; -}; - -/* - * - */ -#ifdef __cplusplus -extern "C" { -#endif - void memtest_run(memtest_t *testp, uint32_t testmask); -#ifdef __cplusplus -} -#endif - -#endif /* MEMTEST_H_ */ diff --git a/ChibiOS_16.1.5/community/os/various/tribuf.c b/ChibiOS_16.1.5/community/os/various/tribuf.c deleted file mode 100644 index 80eb258..0000000 --- a/ChibiOS_16.1.5/community/os/various/tribuf.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - Copyright (C) 2014..2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "osal.h" -#include "tribuf.h" - -/** - * @file tribuf.c - * @brief Triple buffer handler source. - * - * @addtogroup TriBuf - * @{ - */ - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Initializes the tribuf handler object. - * - * @param[in] handler Pointer to the tribuf handler object. - * @param[in] front Pointer to the initial front buffer. - * @param[in] back Pointer to the initial back buffer. - * @param[in] orphan Pointer to the initial orphan buffer. - * - * @init - */ -void tribufObjectInit(tribuf_t *handler, void *front, void *back, void *orphan) { - - handler->front = front; - handler->back = back; - handler->orphan = orphan; -#if (TRIBUF_USE_WAIT == TRUE) - chSemObjectInit(&handler->ready, (cnt_t)0); -#else - handler->ready = false; -#endif -} - -/** - * @brief Gets the current front buffer. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Pointer to the current front buffer. - * - * @api - */ -void *tribufGetFront(tribuf_t *handler) { - - void *front; - - osalSysLock(); - front = tribufGetFrontI(handler); - osalSysUnlock(); - return front; -} - -/** - * @brief Swaps the current front buffer. - * - * @details Exchanges the pointer of the current front buffer, which will be - * dismissed, with the pointer of the current orphan buffer, which - * holds the content of the new front buffer. - * - * @pre The orphan buffer holds new data, swapped by the back buffer. - * @pre The fron buffer is ready for swap. - * @post The orphan buffer can be used as new back buffer in the future. - * - * @param[in] handler Pointer to the tribuf handler object. - * - * @iclass - */ -void tribufSwapFrontI(tribuf_t *handler) { - - void *front; - - osalDbgCheckClassI(); - - front = handler->orphan; - handler->orphan = handler->front; - handler->front = front; -} - -/** - * @brief Swaps the current front buffer. - * - * @details Exchanges the pointer of the current front buffer, which will be - * dismissed, with the pointer of the current orphan buffer, which - * holds the content of the new front buffer. - * - * @pre The orphan buffer holds new data, swapped by the back buffer. - * @pre The fron buffer is ready for swap. - * @post The orphan buffer can be used as new back buffer in the future. - * - * @param[in] handler Pointer to the tribuf handler object. - * - * @api - */ -void tribufSwapFront(tribuf_t *handler) { - - osalSysLock(); - tribufSwapFrontI(handler); - osalSysUnlock(); -} - -/** - * @brief Gets the current back buffer. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Pointer to the current back buffer. - * - * @api - */ -void *tribufGetBack(tribuf_t *handler) { - - void *back; - - osalSysLock(); - back = tribufGetBackI(handler); - osalSysUnlock(); - return back; -} - -/** - * @brief Swaps the current back buffer. - * - * @details Exchanges the pointer of the current back buffer, which holds new - * useful data, with the pointer of the current orphan buffer. - * - * @pre The orphan buffer holds no meaningful data. - * @post The orphan buffer is candidate for new front buffer. - * @post A new front buffer is ready and signaled. - * - * @param[in] handler Pointer to the tribuf handler object. - * - * @iclass - */ -void tribufSwapBackI(tribuf_t *handler) { - - void *back; - - osalDbgCheckClassI(); - - back = handler->orphan; - handler->orphan = handler->back; - handler->back = back; - -#if (TRIBUF_USE_WAIT == TRUE) - if (chSemGetCounterI(&handler->ready) < (cnt_t)1) - chSemSignalI(&handler->ready); -#else - handler->ready = true; -#endif -} - -/** - * @brief Swaps the current back buffer. - * - * @details Exchanges the pointer of the current back buffer, which holds new - * useful data, with the pointer of the current orphan buffer. - * - * @pre The orphan buffer holds no meaningful data. - * @post The orphan buffer is candidate for new front buffer. - * @post A new front buffer is ready and signaled. - * - * @param[in] handler Pointer to the tribuf handler object. - * - * @api - */ -void tribufSwapBack(tribuf_t *handler) { - - osalSysLock(); - tribufSwapBackI(handler); -#if (TRIBUF_USE_WAIT == TRUE) - osalOsRescheduleS(); -#endif - osalSysUnlock(); -} - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/various/tribuf.h b/ChibiOS_16.1.5/community/os/various/tribuf.h deleted file mode 100644 index 4ba3f25..0000000 --- a/ChibiOS_16.1.5/community/os/various/tribuf.h +++ /dev/null @@ -1,225 +0,0 @@ -/* - Copyright (C) 2014..2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file tribuf.h - * @brief Triple buffer handler header. - * - * @addtogroup TriBuf - * @{ - */ - -#ifndef _TRIBUF_H_ -#define _TRIBUF_H_ - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Triple buffer configuration options - * @{ - */ - -/** - * @brief Triple buffers use blocking functions. - */ -#if !defined(TRIBUF_USE_WAIT) || defined(__DOXYGEN__) -#define TRIBUF_USE_WAIT TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Triple buffer handler object. - */ -typedef struct { - void *front; /**< @brief Current front buffer pointer.*/ - void *back; /**< @brief Current back buffer pointer.*/ - void *orphan; /**< @brief Current orphan buffer pointer.*/ -#if (TRIBUF_USE_WAIT == TRUE) - semaphore_t ready; /**< @brief A new front buffer is ready.*/ -#else - bool ready; /**< @brief A new front buffer is ready.*/ -#endif -} tribuf_t; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Checks if a new front buffer is ready. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Availability of a new front buffer. - * - * @iclass - */ -static inline -bool tribufIsReadyI(tribuf_t *handler) -{ - osalDbgCheckClassI(); - -#if (TRIBUF_USE_WAIT == TRUE) - return (0 != chSemGetCounterI(&handler->ready)); -#else - return handler->ready; -#endif -} - -#if (TRIBUF_USE_WAIT == TRUE) || defined(__DOXYGEN__) - -/** - * @brief Waits until a new front buffer is ready, with timeout. - * - * @post The ready signal, result of the back buffer swap, is consumed. - * - * @param[in] handler Pointer to the tribuf handler object. - * @param[in] timeout Timeout of the wait operation. - * @return Timeout error code, as from @p chSemWaitTimeoutS. - * - * @see chSemWaitTimeoutS - * @sclass - */ -static inline -msg_t tribufWaitReadyTimeoutS(tribuf_t *handler, systime_t timeout) -{ - osalDbgCheckClassS(); - - return chSemWaitTimeoutS(&handler->ready, timeout); -} - -/** - * @brief Waits until a new front buffer is ready, with timeout. - * - * @post The ready signal, result of the back buffer swap, is consumed. - * - * @param[in] handler Pointer to the tribuf handler object. - * @param[in] timeout Timeout of the wait operation. - * @return Timeout error code, as from @p chSemWaitTimeout. - * - * @see chSemWaitTimeout - * @api - */ -static inline -msg_t tribufWaitReadyTimeout(tribuf_t *handler, systime_t timeout) -{ - return chSemWaitTimeout(&handler->ready, timeout); -} - -/** - * @brief Waits until a new front buffer is ready. - * - * @post The ready signal, result of the back buffer swap, is consumed. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Timeout error code, as from @p chSemWaitS. - * - * @see chSemWaitS - * @sclass - */ -static inline -void tribufWaitReadyS(tribuf_t *handler) -{ - osalDbgCheckClassS(); - - chSemWaitS(&handler->ready); -} - -/** - * @brief Waits until a new front buffer is ready. - * - * @post The ready signal, result of the back buffer swap, is consumed. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Timeout error code, as from @p chSemWait. - * - * @see chSemWait - * @api - */ -static inline -void tribufWaitReady(tribuf_t *handler) -{ - chSemWait(&handler->ready); -} - -#endif /* (TRIBUF_USE_WAIT == TRUE) || defined(__DOXYGEN__) */ - -/** - * @brief Gets the current front buffer. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Pointer to the current front buffer. - * - * @iclass - */ -static inline -void *tribufGetFrontI(tribuf_t *handler) { - - osalDbgCheckClassI(); - - return handler->front; -} - -/** - * @brief Gets the current back buffer. - * - * @param[in] handler Pointer to the tribuf handler object. - * @return Pointer to the current back buffer. - * - * @iclass - */ -static inline -void *tribufGetBackI(tribuf_t *handler) { - - osalDbgCheckClassI(); - - return handler->back; -} - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#ifdef __cplusplus -extern "C" { -#endif - void tribufObjectInit(tribuf_t *handler, void *front, void *back, void *orphan); - void *tribufGetFront(tribuf_t *handler); - void tribufSwapFrontI(tribuf_t *handler); - void tribufSwapFront(tribuf_t *handler); - void *tribufGetBack(tribuf_t *handler); - void tribufSwapBackI(tribuf_t *handler); - void tribufSwapBack(tribuf_t *handler); -#ifdef __cplusplus -} -#endif - -#endif /* _TRIBUF_H_ */ -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/.keep b/ChibiOS_16.1.5/community/testhal/.keep deleted file mode 100644 index e69de29..0000000 diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile deleted file mode 100644 index a4de448..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile +++ /dev/null @@ -1,218 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DCRT0_INIT_STACKS=0 -# USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h deleted file mode 100644 index eecc0a6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h deleted file mode 100644 index 6430fb2..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c deleted file mode 100644 index 8c0df50..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define MMA8451_ADDR 0x1D -#define WHO_AM_I 0x0D - -static bool i2cOk = false; - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("Blinker"); - while (TRUE) { - if (i2cOk) { - palSetPad(IOPORT3, 3); - palTogglePad(IOPORT4, 4); - } else { - palSetPad(IOPORT4, 4); - palTogglePad(IOPORT3, 3); - } - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - uint8_t tx[1], rx[1]; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPad(IOPORT3, 3); - palSetPad(IOPORT4, 4); - palSetPad(IOPORT1, 2); - - i2cStart(&I2CD1, NULL); - - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - while (1) { - tx[0] = WHO_AM_I; - i2cMasterTransmitTimeout(&I2CD1, MMA8451_ADDR, tx, 1, rx, 1, TIME_INFINITE); - i2cOk = (rx[0] == 0x1A) ? true : false; - chThdSleepMilliseconds(2000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h deleted file mode 100644 index 0b7c312..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -/* Enable clock initialization by HAL */ -#define KINETIS_NO_INIT FALSE - -/* PEE mode - external (8 MHz) crystal with PLL for 48 MHz core/system clock. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* FEI mode - 48 MHz with internal 32.768 kHz oscillator */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~48MHz) by 1 to SYSCLK */ -#define KINETIS_CLKDIV1_OUTDIV2 1 /* Divide by 1 for (~48MHz) peripheral clock */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~24MHz) flash clock */ -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -/* not implemented */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 FALSE -#define KINETIS_I2C_USE_I2C0 TRUE -#define KINETIS_I2C_I2C0_PRIORITY 8 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt deleted file mode 100644 index 0a9a5fc..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt +++ /dev/null @@ -1,20 +0,0 @@ -********************************************************************* -** ChibiOS/RT I2C test demo for Freedom Board K20D50M. ** -********************************************************************* - -** TARGET ** - -The test runs on an Freescale Freedom K20D50M board. - -** The Demo ** - -This test tries to access the onboard MMA8451 chip using the I2C bus. -It sends the command WHO_AM_I which has a standard answer that can be -verified. If the correct answer is received the GREEN led will blink. -If no answer or invalid answer is received the RED led will blink. - -** Build Procedure ** - -This test was built using the ARM GCC toolchain available at: - -https://launchpad.net/gcc-arm-embedded diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile deleted file mode 100644 index a5f4c68..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile +++ /dev/null @@ -1,225 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - usbcfg.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h deleted file mode 100644 index bd97716..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf deleted file mode 100644 index 519b300..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="ChTsy" -DRIVERFILENAME ="usbser" -MFGNAME="NopeLab" -INSTDISK="ChTsy CDC driver" -DESCRIPTION="ChTsy CDC driver" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h deleted file mode 100644 index 45e72ef..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the Watchdog subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/* - * @brief Enable debugging messages over SD1. - * - * @note Requires HAL_USE_SERIAL. - */ -#if HAL_USE_SERIAL -#define DEBUG_USB -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c deleted file mode 100644 index a6c90bf..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - (C) 2015-2016 Jonathan Struebel - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "usbcfg.h" - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { -#if 1 - /* Writing in channel mode.*/ - chnWrite(&SDU1, buf, sizeof buf - 1); -#else - /* Writing in buffer mode.*/ - (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); - memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); - obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); -#endif - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - systime_t time; - - (void)arg; - - chRegSetThreadName("blinker"); - while (true) { - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(time); - palSetPad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, spawning shells. - */ - while (true) { - if (SDU1.config->usbp->state == USB_ACTIVE) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg1); - chThdWait(shelltp); /* Waiting termination. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h deleted file mode 100644 index b6b6622..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c deleted file mode 100644 index 24a732f..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - (C) 2015-2016 Jonathan Struebel - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0179, /* idVendor. */ - 0x0001, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(2+2*7), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(2+5*2), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - chSysLockFromISR(); - - /* Disconnection event on suspend.*/ - sduDisconnectI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - sof_handler -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h deleted file mode 100644 index 254d7ba..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - (C) 2015-2016 Jonathan Struebel - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; -extern SerialUSBDriver SDU1; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject deleted file mode 100644 index 4e28c4a..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project deleted file mode 100644 index 0bd79df..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project +++ /dev/null @@ -1,27 +0,0 @@ - - - RT-FREEDOM-KL25Z-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile deleted file mode 100644 index d5120b9..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -std=gnu99 -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib - -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h deleted file mode 100644 index eecc0a6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch deleted file mode 100644 index 67d3e82..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch +++ /dev/null @@ -1,31 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h deleted file mode 100644 index f8b4e8c..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c deleted file mode 100644 index f01051b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Derek Mulcahy - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 2 -#define ADC_GRP1_BUF_DEPTH 1 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; - -static void adc_end_cb(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - (void)n; - - /* - * The bandgap value represents the ADC reading for 1.0V - */ - uint16_t sensor = buffer[0]; - uint16_t bandgap = buffer[1]; - - /* - * The v25 value is the voltage reading at 25C, it comes from the ADC - * electricals table in the processor manual. V25 is in millivolts. - */ - int32_t v25 = 716; - - /* - * The m value is slope of the temperature sensor values, again from - * the ADC electricals table in the processor manual. - * M in microvolts per degree. - */ - int32_t m = 1620; - - /* - * Divide the temperature sensor reading by the bandgap to get - * the voltage for the ambient temperature in millivolts. - */ - int32_t vamb = (sensor * 1000) / bandgap; - - /* - * This formula comes from the reference manual. - * Temperature is in millidegrees C. - */ - int32_t delta = (((vamb - v25) * 1000000) / m); - int32_t temp = 25000 - delta; - - if (temp < 19000) { - /* Turn just the Blue LED on if less than 19C */ - palSetPad(GPIOB,18); // Red - palSetPad(GPIOB,19); // Green - palClearPad(GPIOD,1); // Blue - } else if (temp > 28000) { - /* Turn just the Red LED on if greater than 28C */ - palClearPad(GPIOB,18); // Red - palSetPad(GPIOB,19); // Green - palSetPad(GPIOD,1); // Blue - } else { - /* Turn just the Green LED on if between 19C and 28C */ - palSetPad(GPIOB,18); // Red - palClearPad(GPIOB,19); // Green - palSetPad(GPIOD,1); // Blue - } -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - */ -static const ADCConversionGroup adcgrpcfg1 = { - false, - ADC_GRP1_NUM_CHANNELS, - adc_end_cb, - NULL, - ADC_TEMP_SENSOR | ADC_BANDGAP, - /* CFG1 Regiser - ADCCLK = SYSCLK / 16, 16 bits per sample */ - ADCx_CFG1_ADIV(ADCx_CFG1_ADIV_DIV_8) | - ADCx_CFG1_ADICLK(ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2) | - ADCx_CFG1_MODE(ADCx_CFG1_MODE_16_BITS), - /* SC3 Register - Average 32 readings per sample */ - ADCx_SC3_AVGE | - ADCx_SC3_AVGS(ADCx_SC3_AVGS_AVERAGE_32_SAMPLES) -}; - -static const ADCConfig adccfg1 = { - /* Perform initial calibration */ - true -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the ADC1 driver. - */ - adcStart(&ADCD1, &adccfg1); - - while (1) { - /* - * ADC linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h deleted file mode 100644 index b657ccf..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ -/* The defaults are MCG_MODE_PEE, SYSCLK 48MHz, PLLCLK 96MHz, BUSCLK 24MHz */ - -/* PEE mode - 48MHz system clock driven by external crystal. */ -#if 1 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif /* 0 */ - -/* FEE mode - 24 MHz with external 32.768 kHz crystal */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ -#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ -#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ -#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) -#endif /* 0 */ - -/* FEE mode - 48 MHz */ -#if 0 -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ -#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#endif /* 0 */ - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 FALSE - -/* - * ADC driver system settings. - */ -#define KINETIS_ADC_USE_ADC0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt deleted file mode 100644 index 4077343..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt +++ /dev/null @@ -1,14 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M0+ Freedom Board KL25Z. ** -***************************************************************************** - -The demo runs on an Freescale Freedom KL25Z board and demonstrates -the usage of the ADC. - -It reads the internal temperature sensor. If the temperature drops -below 20C (68F) it turns on the blue LED. If the temperature rises -above 27C (81F) it turns on the red LED. Otherwise the green LED is -illuminated. - -The internal bandgap voltage reference is used to calibrate the -results returned from the temperature sensor. diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile deleted file mode 100644 index 8ea9026..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h deleted file mode 100644 index b7ffc80..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL25Z/GPT/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h deleted file mode 100644 index bd57f0a..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL25Z/GPT/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c deleted file mode 100644 index 926730d..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define POLLED_TEST FALSE - -void gptcb(GPTDriver *gptp) { - (void)gptp; - palTogglePad(GPIO_LED_GREEN, PIN_LED_GREEN); -} - -/* - * GPT configuration structure. - */ -static const GPTConfig gpt1cfg = { - 4, - gptcb -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - /* - * Initializes the GPT driver 1. - */ - gptStart(&GPTD1, &gpt1cfg); - -#if !POLLED_TEST - gptStartContinuous(&GPTD1, 2); -#endif - - while (1) { -#if POLLED_TEST - gpt_lld_polled_delay(&GPTD1, 1) ; - palTogglePad(GPIO_LED_GREEN, PIN_LED_GREEN); -#else - chThdSleepMilliseconds(500); -#endif - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h deleted file mode 100644 index 6a2d2d7..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - - -/* - * GPT driver system settings. - */ -#define KINETIS_GPT_USE_PIT0 TRUE -#define KINETIS_GPT_PIT0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile deleted file mode 100644 index 8ea9026..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h deleted file mode 100644 index 25dd7b8..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL25Z/PWM/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h deleted file mode 100644 index 89d31a5..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL25Z/PWM/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c deleted file mode 100644 index 32d8020..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * (c) 2015 flabbergast - * Based on ChibiOS 3.0.1 demo code, license below. - * Licensed under the Apache License, Version 2.0. - */ - -/* - * ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include "ch.h" -#include "hal.h" - -/* - * on FRDM-KL25Z: - * red LED on PTB18/TPM2_CH0 (AF3) - * green LED on PTB19/TPM2_CH1 (AF3) - */ - -#define PWM_DRIVER PWMD3 - -/* PWM config structure */ -/* Note: the PWM clock frequency must be so that - * SYSCLK / FREQ is a power of 2 between 1 and 128. - */ -static const PWMConfig pwmcfg = { - 750000, /* 750kHz PWM clock frequency. */ - 1000, /* PWM period is 1000 cycles. */ - /* meaning PWM resolution is 750 */ - NULL, /* no callback */ - { - {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch0: mode, no callback */ - {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch1: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch2: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch3: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch4: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL} /* ch5: mode, no callback */ - }, -}; - -#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ - -/* Breathing Sleep LED brighness(PWM On period) table - * - * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 - * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } - */ -/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (10000*x/m).to_i}; p a" */ -#define TABLE_SIZE 256 -static const uint16_t breathing_table[TABLE_SIZE] = { - 0, 0, 1, 4, 7, 11, 17, 23, 30, 38, 47, 58, 69, 81, 94, 109, 124, 141, 159, 177, 197, 218, 241, 264, 289, 315, 343, 372, 402, 433, 466, 501, 537, 574, 613, 654, 696, 741, 786, 834, 883, 935, 988, 1043, 1100, 1159, 1220, 1283, 1349, 1416, 1486, 1558, 1632, 1709, 1788, 1870, 1954, 2040, 2129, 2220, 2314, 2411, 2510, 2611, 2715, 2822, 2932, 3044, 3158, 3275, 3395, 3517, 3641, 3768, 3897, 4028, 4162, 4298, 4436, 4576, 4717, 4861, 5006, 5152, 5300, 5449, 5600, 5751, 5903, 6055, 6208, 6361, 6513, 6666, 6818, 6970, 7120, 7269, 7417, 7563, 7708, 7850, 7990, 8127, 8261, 8391, 8519, 8643, 8762, 8878, 8989, 9095, 9196, 9293, 9383, 9469, 9548, 9622, 9689, 9750, 9805, 9853, 9895, 9930, 9957, 9978, 9992, 9999, 10000, 9992, 9978, 9957, 9930, 9895, 9853, 9805, 9750, 9689, 9622, 9548, 9469, 9383, 9293, 9196, 9095, 8989, 8878, 8762, 8643, 8519, 8391, 8261, 8127, 7990, 7850, 7708, 7563, 7417, 7269, 7120, 6970, 6818, 6666, 6513, 6361, 6208, 6055, 5903, 5751, 5600, 5449, 5300, 5152, 5006, 4861, 4717, 4576, 4436, 4298, 4162, 4028, 3897, 3768, 3641, 3517, 3395, 3275, 3158, 3044, 2932, 2822, 2715, 2611, 2510, 2411, 2314, 2220, 2129, 2040, 1954, 1870, 1788, 1709, 1632, 1558, 1486, 1416, 1349, 1283, 1220, 1159, 1100, 1043, 988, 935, 883, 834, 786, 741, 696, 654, 613, 574, 537, 501, 466, 433, 402, 372, 343, 315, 289, 264, 241, 218, 197, 177, 159, 141, 124, 109, 94, 81, 69, 58, 47, 38, 30, 23, 17, 11, 7, 4, 1, 0, 0 -}; - -uint16_t table_pos = 0; -uint8_t active_led = 0; - -static THD_WORKING_AREA(waBreatheThread, 128); -static THD_FUNCTION(BreatheThread, arg) { - (void)arg; - chRegSetThreadName("breatheThread"); - - while(true) { - pwmEnableChannel(&PWM_DRIVER, active_led, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - table_pos++; - if(table_pos == TABLE_SIZE) { - table_pos = 0; - active_led = (active_led+1) % 2; - } - chThdSleepMilliseconds(BREATHE_STEP); - } -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetLine(LINE_LED_RED); /* red */ - palSetLine(LINE_LED_GREEN); /* green */ - palSetLine(LINE_LED_BLUE); /* blue */ - - /* - * Start the PWM driver, route TPM2 output to PTB18, PTB19. - * Enable channels now to avoid a blink later. - */ - pwmStart(&PWM_DRIVER, &pwmcfg); - palSetLineMode(LINE_LED_RED, PAL_MODE_ALTERNATIVE_3); - palSetLineMode(LINE_LED_GREEN, PAL_MODE_ALTERNATIVE_3); - pwmEnableChannel(&PWM_DRIVER, 0, 0); - pwmEnableChannel(&PWM_DRIVER, 1, 0); - - /* - * Create the breathe thread. - */ - chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop. - */ - while(true) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h deleted file mode 100644 index ff704e6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -/* - * PWM driver settings. - */ -#define KINETIS_PWM_USE_TPM2 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile deleted file mode 100644 index ed84ee9..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -CC=gcc -CFLAGS = -Wall -Wextra -O2 -g - -SRCS = $(wildcard *.c) -OBJS = $(SRCS:%.c=%.o) -EXE = test-usb-hid - -all: $(EXE) - -$(EXE): $(OBJS) - --include $(subst .c,.d,$(SRCS)) - -%.d: %.c - $(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -MM -MF $@ -MP -MT $(subst .c,.o,$<) $< - -clean: - rm -f $(EXE) - rm -f $(OBJS) - rm -f $(subst .c,.d,$(SRCS)) - rm -f *~ - -.PHONY: clean all diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c deleted file mode 100644 index 241b129..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - - Copyright (c) 2014 Guillaume Duc - - Permission is hereby granted, free of charge, to any person obtaining a copy - of this software and associated documentation files (the "Software"), to deal - in the Software without restriction, including without limitation the rights - to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - copies of the Software, and to permit persons to whom the Software is - furnished to do so, subject to the following conditions: - - The above copyright notice and this permission notice shall be included in all - copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - SOFTWARE. - -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define USB_HID_IN_REPORT_SIZE 1 -#define USB_HID_OUT_REPORT_SIZE 1 - -struct usb_hid_in_report_s -{ - uint8_t sequence_number; -}; - -struct usb_hid_out_report_s -{ - uint8_t sequence_number; -}; - -static uint8_t usb_hid_in_report_buf[USB_HID_IN_REPORT_SIZE]; -// +1 for the report index -static uint8_t usb_hid_out_report_buf[USB_HID_OUT_REPORT_SIZE + 1]; - -static struct usb_hid_in_report_s *usb_hid_in_report = - (struct usb_hid_in_report_s *) usb_hid_in_report_buf; - -static struct usb_hid_out_report_s *usb_hid_out_report = - (struct usb_hid_out_report_s *) (&usb_hid_out_report_buf[1]); - -static int usb_hid_fd; -static uint8_t wkup_pb_old_value = 0; - -static void -read_in_report () -{ - int res, i; - - printf ("read()\n"); - res = read (usb_hid_fd, usb_hid_in_report_buf, USB_HID_IN_REPORT_SIZE); - if (res < 0) - { - perror ("read"); - exit (EXIT_FAILURE); - } - else - { - printf ("read() read %d bytes:\t", res); - for (i = 0; i < res; i++) - printf ("%02hhx ", usb_hid_in_report_buf[i]); - printf ("\n"); - } -} - -static void -send_out_report () -{ - int res; - - usb_hid_out_report_buf[0] = 0; - - res = - write (usb_hid_fd, usb_hid_out_report_buf, USB_HID_OUT_REPORT_SIZE + 1); - if (res < 0) - { - perror ("write"); - exit (EXIT_FAILURE); - } - - usb_hid_out_report->sequence_number++; -} - -static void -usb_hid_init (const char *dev_name) -{ - int i, res; - int desc_size = 0; - char buf[256]; - - struct hidraw_report_descriptor rpt_desc; - struct hidraw_devinfo info; - - usb_hid_fd = open (dev_name, O_RDWR); - - if (usb_hid_fd < 0) - { - perror ("Unable to open device"); - exit (EXIT_FAILURE); - } - - memset (&rpt_desc, 0x0, sizeof (rpt_desc)); - memset (&info, 0x0, sizeof (info)); - memset (buf, 0x0, sizeof (buf)); - - // Get Report Descriptor Size - res = ioctl (usb_hid_fd, HIDIOCGRDESCSIZE, &desc_size); - if (res < 0) - perror ("HIDIOCGRDESCSIZE"); - else - printf ("Report Descriptor Size: %d\n", desc_size); - - // Get Report Descriptor - rpt_desc.size = desc_size; - res = ioctl (usb_hid_fd, HIDIOCGRDESC, &rpt_desc); - if (res < 0) - { - perror ("HIDIOCGRDESC"); - } - else - { - printf ("Report Descriptor:\n"); - for (i = 0; i < rpt_desc.size; i++) - printf ("%02hhx ", rpt_desc.value[i]); - puts ("\n"); - } -} - -int -main (int argc, char **argv) -{ - if (argc < 2) - { - fprintf (stderr, "Usage: %s /dev/hidrawX\n", argv[0]); - return EXIT_FAILURE; - } - - memset (usb_hid_out_report_buf, 0, sizeof (usb_hid_out_report_buf)); - - usb_hid_init (argv[1]); - usb_hid_out_report->sequence_number = 4; - send_out_report (); - - while (1) - { - read_in_report (); - - if (usb_hid_in_report->sequence_number == 40) - { - usb_hid_out_report->sequence_number = usb_hid_in_report->sequence_number / 2; - send_out_report (); - } - - } - - close (usb_hid_fd); - - return EXIT_SUCCESS; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules deleted file mode 100644 index 8c93f15..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules +++ /dev/null @@ -1,2 +0,0 @@ -SUBSYSTEM=="usb", ATTR{idVendor}=="0179", ATTR{idProduct}=="0002", MODE:="0666" -KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{idVendor}=="0179", ATTRS{idProduct}=="0002", MODE:="0666" diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile deleted file mode 100644 index 39c7ccd..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 --specs=nosys.specs -lnosys -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk -#include $(CHIBIOS)/os/hal/lib/streams/streams.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - usbcfg.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) - - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h deleted file mode 100644 index 6774a44..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked jus * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** -t before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h deleted file mode 100644 index a3466b4..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h +++ /dev/null @@ -1,368 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file boards/FRDM-KL25Z/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 8 -#endif -/** @} */ - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h deleted file mode 100644 index b2f75af..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef HALCONF_COMMUNITY_H -#define HALCONF_COMMUNITY_H - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the EEPROM subsystem. - */ -#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) -#define HAL_USE_EEPROM FALSE -#endif - -/** - * @brief Enables the TIMCAP subsystem. - */ -#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) -#define HAL_USE_TIMCAP FALSE -#endif - -/** - * @brief Enables the USBH subsystem. - */ -#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) -#define HAL_USE_USBH FALSE -#endif - -/** - * @brief Enables the USB HID subsystem. - */ -#if !defined(HAL_USE_USB_HID) || defined(__DOXYGEN__) -#define HAL_USE_USB_HID TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - - /*===========================================================================*/ -/* EEProm driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables 24xx series I2C eeprom device driver. - * @note Disabling this option saves both code and data space. - */ -#define EEPROM_USE_EE24XX TRUE - /** - * @brief Enables 25xx series SPI eeprom device driver. - * @note Disabling this option saves both code and data space. - */ -#define EEPROM_USE_EE25XX TRUE - - -#endif /* HALCONF_COMMUNITY_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c deleted file mode 100644 index 80aeb5d..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#include "usbcfg.h" - -/* - * Blue LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (true) { - systime_t time = USBD1.state == USB_ACTIVE ? 250 : 500; - palTogglePad(GPIO_LED_BLUE, PIN_LED_BLUE); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - /* - * Initializes a USB HID driver. - */ - hidObjectInit(&UHD1); - hidStart(&UHD1, &usbhidcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - - usbDisconnectBus(usbhidcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(usbhidcfg.usbp, &usbcfg); - usbConnectBus(usbhidcfg.usbp); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); - - while (true) { - if (usbhidcfg.usbp->state == USB_ACTIVE) { - uint8_t report; - size_t n = hidGetReport(0, &report, sizeof(report)); - hidWriteReport(&UHD1, &report, n); - n = hidReadReportt(&UHD1, &report, sizeof(report), TIME_IMMEDIATE); - if (n > 0) - hidSetReport(0, &report, n); - } - palTogglePad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h deleted file mode 100644 index 57629ef..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 0 -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 1 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * I2C driver system settings. - */ -#define KINETIS_I2C_USE_I2C1 TRUE - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -/* - * Endianess of MCU - */ -#define ARCH_LITTLE_ENDIAN - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c deleted file mode 100644 index 30944b5..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file usbcfg.c - * @brief USB driver config. - * - * @addtogroup USB - * @{ - */ -#include "hal.h" -#include "usbcfg.h" - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 - -/* - * USB HID Driver structure. - */ -USBHIDDriver UHD1; - -/* - * Data used for feedback - */ -uint8_t increment_var = 0; - -/* - * USB Device Descriptor. - */ -static const uint8_t hid_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x00, /* bDeviceClass. */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0179, /* idVendor. */ - 0x0002, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor hid_device_descriptor = { - sizeof hid_device_descriptor_data, - hid_device_descriptor_data -}; - -/* - * Configuration Descriptor tree for a HID device - * - * The HID Specifications version 1.11 require the following order: - * - Configuration Descriptor - * - Interface Descriptor - * - HID Descriptor - * - Endpoints Descriptors - */ -#define HID_DESCRIPTOR_OFFSET 18 -#define HID_DESCRIPTOR_SIZE USB_DESC_HID_SIZE - -static const uint8_t hid_configuration_descriptor_data[41] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(41, /* wTotalLength. */ - 0x01, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x03, /* bInterfaceClass (HID Interface - Class). */ - 0x00, /* bInterfaceSubClass (None). */ - 0x00, /* bInterfaceProtocol (None). */ - 0), /* iInterface. */ - /* HID Descriptor.*/ - USB_DESC_HID (0x0110, /* bcdHID. */ - 0x00, /* bCountryCode. */ - 0x01, /* bNumDescriptors. */ - 0x22, /* bDescriptorType (Report - Descriptor). */ - 34), /* wDescriptorLength. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x03, /* bmAttributes (Interrupt). */ - 0x0040, /* wMaxPacketSize. */ - 0x0A), /* bInterval (10ms). */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x03, /* bmAttributes (Interrupt). */ - 0x0040, /* wMaxPacketSize. */ - 0x0A) /* bInterval (10ms). */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor hid_configuration_descriptor = { - sizeof hid_configuration_descriptor_data, - hid_configuration_descriptor_data -}; - -/* - * HID Descriptor wrapper. - */ -static const USBDescriptor hid_descriptor = { - HID_DESCRIPTOR_SIZE, - &hid_configuration_descriptor_data[HID_DESCRIPTOR_OFFSET] -}; - -/* - * HID Report Descriptor - * - * This is the description of the format and the content of the - * different IN or/and OUT reports that your application can - * receive/send - * - * See "Device Class Definition for Human Interface Devices (HID)" - * (http://www.usb.org/developers/hidpage/HID1_11.pdf) for the - * detailed description of all the fields - */ -static const uint8_t hid_report_descriptor_data[] = { - USB_DESC_BYTE (0x06), /* Usage Page - */ - USB_DESC_WORD (0xFF00), /* Vendor Defined. */ - USB_DESC_BYTE (0x09), /* Usage - */ - USB_DESC_BYTE (0x01), /* Vendor Defined. */ - USB_DESC_BYTE (0xA1), /* Collection - */ - USB_DESC_BYTE (0x01), /* Application. */ - - USB_DESC_BYTE (0x09), /* Usage - */ - USB_DESC_BYTE (0x01), /* Vendor Defined. */ - USB_DESC_BYTE (0x15), /* Logical Minimum - */ - USB_DESC_BYTE (0x00), /* 0. */ - USB_DESC_BYTE (0x26), /* Logical Maximum - */ - USB_DESC_WORD (0x00FF), /* 255. */ - USB_DESC_BYTE (0x75), /* Report size - */ - USB_DESC_BYTE (0x08), /* 8 bits. */ - USB_DESC_BYTE (0x95), /* Report count - */ - USB_DESC_BYTE (0x01), /* 1. */ - USB_DESC_BYTE (0x81), /* Input - */ - USB_DESC_BYTE (0x02), /* Data, Variable, Absolute. */ - - USB_DESC_BYTE (0x09), /* Usage - */ - USB_DESC_BYTE (0x01), /* Vendor Defined. */ - USB_DESC_BYTE (0x15), /* Logical Minimum - */ - USB_DESC_BYTE (0x00), /* 0. */ - USB_DESC_BYTE (0x26), /* Logical Maximum - */ - USB_DESC_WORD (0x00FF), /* 255. */ - USB_DESC_BYTE (0x75), /* Report Size - */ - USB_DESC_BYTE (0x08), /* 8 bits. */ - USB_DESC_BYTE (0x95), /* Report Count - */ - USB_DESC_BYTE (0x01), /* 1. */ - USB_DESC_BYTE (0x91), /* Output - */ - USB_DESC_BYTE (0x02), /* Data, Variable, Absolute. */ - - USB_DESC_BYTE (0xC0) /* End Collection. */ -}; - -/* - * HID Report Descriptor wrapper - */ -static const USBDescriptor hid_report_descriptor = { - sizeof hid_report_descriptor_data, - hid_report_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t hid_string0[] = { - USB_DESC_BYTE(2+2*1), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t hid_string1[] = { - USB_DESC_BYTE(2+2*7), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, -}; - -/* - * Device Description string. - */ -static const uint8_t hid_string2[] = { - USB_DESC_BYTE(2+5*2), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, -}; - -/* - * Serial Number string. - */ -static const uint8_t hid_string3[] = { - USB_DESC_BYTE(2+2*3), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor hid_strings[] = { - {sizeof hid_string0, hid_string0}, - {sizeof hid_string1, hid_string1}, - {sizeof hid_string2, hid_string2}, - {sizeof hid_string3, hid_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &hid_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &hid_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &hid_strings[dindex]; - case USB_DESCRIPTOR_INTERFACE: - break; - case USB_DESCRIPTOR_ENDPOINT: - break; - case USB_DESCRIPTOR_HID: - return &hid_descriptor; - case HID_REPORT: - return &hid_report_descriptor; - default: - break; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_INTR, - NULL, - hidDataTransmitted, - hidDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { -// (void)usbp; - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - osalSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - - /* Resetting the state of the CDC subsystem.*/ - hidConfigureHookI(&UHD1); - - osalSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -static bool req_handler(USBDriver *usbp) { - size_t n; - - if ((usbp->setup[0] & USB_RTYPE_TYPE_MASK) == USB_RTYPE_TYPE_CLASS) { - switch (usbp->setup[1]) { - case HID_GET_REPORT: - n = hidGetReport(0, &increment_var, sizeof(increment_var)); - usbSetupTransfer(usbp, &increment_var, n, NULL); - return true; - default: - return hidRequestsHook(usbp); - } - } - return hidRequestsHook(usbp); -} - -#if 0 -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} -#endif - -/** - * @brief Generate HID Report - * @details This function generates the data for an HID report so - * that it can be transferred to the host. - * - * @param[in] id report ID - * @param[out] bp data buffer pointer - * @param[in] n the maximum number of bytes for data buffer - * @return number of bytes of report in data buffer - */ -size_t hidGetReport(uint8_t id, uint8_t *bp, size_t n) { - - (void) id; - (void) n; - - increment_var++; - *bp = increment_var; - return sizeof(increment_var); -} - -/** - * @brief Set HID Report - * @details This function sets the data for an HID report - * that was transferred from the host. - * - * @param[in] id report ID - * @param[in] bp data buffer pointer - * @param[in] n the number of bytes in data buffer - * @return The operation status. - * @retval MSG_OK if the report was set. - */ -msg_t hidSetReport(uint8_t id, uint8_t *bp, size_t n) { - - (void) id; - (void) n; - - increment_var = *bp; - return MSG_OK; -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - req_handler, - NULL - /*sof_handler*/ -}; - -/* - * USB HID driver configuration. - */ -const USBHIDConfig usbhidcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP -}; - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h deleted file mode 100644 index 3d69417..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - Copyright (C) 2016 Jonathan Struebel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file usbcfg.h - * @brief USB driver config header. - * - * @addtogroup USB - * @{ - */ - -#ifndef USBCFG_H -#define USBCFG_H - -#include "hal_usb_hid.h" - -extern const USBConfig usbcfg; -extern const USBHIDConfig usbhidcfg; -extern USBHIDDriver UHD1; - -#ifdef __cplusplus -extern "C" { -#endif - size_t hidGetReport(uint8_t id, uint8_t *bp, size_t n); - msg_t hidSetReport(uint8_t id, uint8_t *bp, size_t n); -#ifdef __cplusplus -} -#endif - -#endif /* USBCFG_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile deleted file mode 100644 index 57ab9e8..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - usbcfg.c \ - main.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h deleted file mode 100644 index 7b54de5..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL25Z/USB_SERIAL/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf deleted file mode 100644 index 4ae7d0b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="ChTsy" -DRIVERFILENAME ="usbser" -MFGNAME="NopeLab" -INSTDISK="ChTsy CDC driver" -DESCRIPTION="ChTsy CDC driver" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h deleted file mode 100644 index 6bb60f7..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL25Z/USB_SERIAL/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/* - * @brief Enable debugging messages over SD1. - * - * @note Requires HAL_USE_SERIAL. - */ -#if HAL_USE_SERIAL -#define DEBUG_USB -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c deleted file mode 100644 index 77c6063..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "usbcfg.h" - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { -#if 1 - /* Writing in channel mode.*/ - chnWrite(&SDU1, buf, sizeof buf - 1); -#else - /* Writing in buffer mode.*/ - (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); - memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); - obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); -#endif - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - systime_t time; - - (void)arg; - - chRegSetThreadName("blinker"); - while (true) { - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(time); - palSetPad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, spawning shells. - */ - while (true) { - if (SDU1.config->usbp->state == USB_ACTIVE) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg1); - chThdWait(shelltp); /* Waiting termination. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h deleted file mode 100644 index 42c9361..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 0 -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 1 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c deleted file mode 100644 index 3093640..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0179, /* idVendor. */ - 0x0001, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(2+2*7), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(2+5*2), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - chSysLockFromISR(); - - /* Disconnection event on suspend.*/ - sduDisconnectI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - sof_handler -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h deleted file mode 100644 index 5aa501e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; -extern SerialUSBDriver SDU1; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile deleted file mode 100644 index 597f431..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DCRT0_INIT_STACKS=0 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h deleted file mode 100644 index eecc0a6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h deleted file mode 100644 index 6430fb2..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c deleted file mode 100644 index 51efd71..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - (c) 2015-2016 flabbergast - Based on K20 I2C demo (c) 2015 Fabio Utzig, http://fabioutzig.com - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define FXOS8700CQ_ADDR 0x1D - -// FXOS8700CQ internal register addresses -#define FXOS8700CQ_STATUS 0x00 -#define FXOS8700CQ_WHOAMI 0x0D -#define FXOS8700CQ_XYZ_DATA_CFG 0x0E -#define FXOS8700CQ_CTRL_REG1 0x2A -#define FXOS8700CQ_M_CTRL_REG1 0x5B -#define FXOS8700CQ_M_CTRL_REG2 0x5C -#define FXOS8700CQ_WHOAMI_VAL 0xC7 - -static bool i2cOk = false; - -static const I2CConfig i2ccfg = { - 400000 // clock -}; - -static THD_WORKING_AREA(waThread1, 64); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("Blinker"); - while(true) { - if(i2cOk) { - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* Off red */ - palTogglePad(GPIO_LED_GREEN, PIN_LED_GREEN); /* Blink green */ - } else { - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* Off green */ - palTogglePad(GPIO_LED_RED, PIN_LED_RED); /* Blink red */ - } - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - uint8_t tx[1], rx[1]; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - i2cStart(&I2CD1, &i2ccfg); - - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - while (1) { - tx[0] = FXOS8700CQ_WHOAMI; - i2cMasterTransmitTimeout(&I2CD1, FXOS8700CQ_ADDR, tx, 1, rx, 1, TIME_INFINITE); - i2cOk = (rx[0] == FXOS8700CQ_WHOAMI_VAL) ? true : false; - chThdSleepMilliseconds(2000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h deleted file mode 100644 index 70c8e80..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * I2C driver settings. - */ -#define KINETIS_I2C_USE_I2C0 TRUE -#define KINETIS_I2C_USE_I2C1 FALSE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_I2C_I2C0_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt deleted file mode 100644 index 40474c1..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt +++ /dev/null @@ -1,20 +0,0 @@ -********************************************************************* -** ChibiOS/RT I2C test demo for Freedom Board KL26Z. ** -********************************************************************* - -** TARGET ** - -The test runs on an Freescale Freedom KL26Z board. - -** The Demo ** - -This test tries to access the onboard FXOS8700CQ chip using the I2C bus. -It sends the command WHO_AM_I which has a standard answer that can be -verified. If the correct answer is received the GREEN led will blink. -If no answer or invalid answer is received the RED led will blink. - -** Build Procedure ** - -This test was built using the ARM GCC toolchain available at: - -https://launchpad.net/gcc-arm-embedded diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile deleted file mode 100644 index bca626d..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h deleted file mode 100644 index 8c37f87..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL26Z/PWM/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h deleted file mode 100644 index c65617e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL26Z/PWM/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c deleted file mode 100644 index 740471a..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * (c) 2015 flabbergast - * Based on ChibiOS 3.0.1 demo code, license below. - * Licensed under the Apache License, Version 2.0. - */ - -/* - * ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include "ch.h" -#include "hal.h" - -/* - * on FRDM-KL26Z: - * red LED on PTE29/TPM0_CH2 (AF3) - * green LED on PTE31/TPM0_CH4 (AF3) - * blue LED on PTD5/TPM0_CH5 (AF4) - */ - -#define PWM_DRIVER PWMD1 - -/* PWM config structure */ -/* Note: the PWM clock frequency must be so that - * SYSCLK / FREQ is a power of 2 between 1 and 128. - */ -static const PWMConfig pwmcfg = { - 750000, /* 750kHz PWM clock frequency. */ - 1000, /* PWM period is 1000 cycles. */ - /* meaning PWM resolution is 750 */ - NULL, /* no callback */ - { - {PWM_OUTPUT_DISABLED, NULL}, /* ch0: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch1: mode, no callback */ - {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch2: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch3: mode, no callback */ - {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch4: mode, no callback */ - {PWM_OUTPUT_ACTIVE_LOW, NULL} /* ch5: mode, no callback */ - }, -}; - -#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ - -/* Breathing Sleep LED brighness(PWM On period) table - * - * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 - * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } - */ -/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (10000*x/m).to_i}; p a" */ -#define TABLE_SIZE 256 -static const uint16_t breathing_table[TABLE_SIZE] = { - 0, 0, 1, 4, 7, 11, 17, 23, 30, 38, 47, 58, 69, 81, 94, 109, 124, 141, 159, 177, 197, 218, 241, 264, 289, 315, 343, 372, 402, 433, 466, 501, 537, 574, 613, 654, 696, 741, 786, 834, 883, 935, 988, 1043, 1100, 1159, 1220, 1283, 1349, 1416, 1486, 1558, 1632, 1709, 1788, 1870, 1954, 2040, 2129, 2220, 2314, 2411, 2510, 2611, 2715, 2822, 2932, 3044, 3158, 3275, 3395, 3517, 3641, 3768, 3897, 4028, 4162, 4298, 4436, 4576, 4717, 4861, 5006, 5152, 5300, 5449, 5600, 5751, 5903, 6055, 6208, 6361, 6513, 6666, 6818, 6970, 7120, 7269, 7417, 7563, 7708, 7850, 7990, 8127, 8261, 8391, 8519, 8643, 8762, 8878, 8989, 9095, 9196, 9293, 9383, 9469, 9548, 9622, 9689, 9750, 9805, 9853, 9895, 9930, 9957, 9978, 9992, 9999, 10000, 9992, 9978, 9957, 9930, 9895, 9853, 9805, 9750, 9689, 9622, 9548, 9469, 9383, 9293, 9196, 9095, 8989, 8878, 8762, 8643, 8519, 8391, 8261, 8127, 7990, 7850, 7708, 7563, 7417, 7269, 7120, 6970, 6818, 6666, 6513, 6361, 6208, 6055, 5903, 5751, 5600, 5449, 5300, 5152, 5006, 4861, 4717, 4576, 4436, 4298, 4162, 4028, 3897, 3768, 3641, 3517, 3395, 3275, 3158, 3044, 2932, 2822, 2715, 2611, 2510, 2411, 2314, 2220, 2129, 2040, 1954, 1870, 1788, 1709, 1632, 1558, 1486, 1416, 1349, 1283, 1220, 1159, 1100, 1043, 988, 935, 883, 834, 786, 741, 696, 654, 613, 574, 537, 501, 466, 433, 402, 372, 343, 315, 289, 264, 241, 218, 197, 177, 159, 141, 124, 109, 94, 81, 69, 58, 47, 38, 30, 23, 17, 11, 7, 4, 1, 0, 0 -}; - -uint16_t table_pos = 0; -uint8_t active_led = 0; - -static THD_WORKING_AREA(waBreatheThread, 128); -static THD_FUNCTION(BreatheThread, arg) { - (void)arg; - chRegSetThreadName("breatheThread"); - - while(true) { - switch(active_led) { - case 0: /* red LED */ - pwmEnableChannel(&PWM_DRIVER, 2, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - break; - case 1: /* green LED */ - pwmEnableChannel(&PWM_DRIVER, 4, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - break; - case 2: /* blue LED */ - pwmEnableChannel(&PWM_DRIVER, 5, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - break; - } - table_pos++; - if(table_pos == TABLE_SIZE) { - table_pos = 0; - active_led = (active_led+1) % 3; - } - chThdSleepMilliseconds(BREATHE_STEP); - } -} - -/* - * Check button thread - */ -static THD_WORKING_AREA(waButtonThread, 128); -static THD_FUNCTION(ButtonThread, arg) { - (void)arg; - chRegSetThreadName("buttonThread"); - - uint8_t newstate, state = PAL_HIGH; - - while(true) { - if(palReadLine(LINE_BUTTON) != state) { - chThdSleepMilliseconds(20); /* debounce */ - newstate = palReadLine(LINE_BUTTON); - if(newstate != state) { - state = newstate; - if(newstate == PAL_LOW) { - table_pos = (table_pos + 120)%TABLE_SIZE; - } - } - } - chThdSleepMilliseconds(20); - } -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetLine(LINE_LED_RED); /* red */ - palSetLine(LINE_LED_GREEN); /* green */ - palSetLine(LINE_LED_BLUE); /* blue */ - - /* - * Create the button check thread. - */ - chThdCreateStatic(waButtonThread, sizeof(waButtonThread), NORMALPRIO, ButtonThread, NULL); - - /* - * Start the PWM driver, route TPM0 output to PTE29, PTE31, PTD5. - * Enable channels now to avoid a blink later. - */ - pwmStart(&PWM_DRIVER, &pwmcfg); - palSetLineMode(LINE_LED_RED, PAL_MODE_ALTERNATIVE_3); - palSetLineMode(LINE_LED_GREEN, PAL_MODE_ALTERNATIVE_3); - palSetLineMode(LINE_LED_BLUE, PAL_MODE_ALTERNATIVE_4); - pwmEnableChannel(&PWM_DRIVER, 2, 0); - pwmEnableChannel(&PWM_DRIVER, 4, 0); - pwmEnableChannel(&PWM_DRIVER, 5, 0); - - /* - * Create the breathe thread. - */ - chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state, when the button is - * pressed ... nothing happens. - */ - while(true) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h deleted file mode 100644 index 3622a23..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -/* - * PWM driver settings. - */ -#define KINETIS_PWM_USE_TPM0 TRUE - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile deleted file mode 100644 index 3cf61b4..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - main.c \ - usbcfg.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h deleted file mode 100644 index c7ed185..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL26Z/USB_SERIAL/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf deleted file mode 100644 index 4ae7d0b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="ChTsy" -DRIVERFILENAME ="usbser" -MFGNAME="NopeLab" -INSTDISK="ChTsy CDC driver" -DESCRIPTION="ChTsy CDC driver" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h deleted file mode 100644 index a299d39..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file FRDM-KL26Z/USB_SERIAL/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c deleted file mode 100644 index 897dc58..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "usbcfg.h" - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { -#if 1 - /* Writing in channel mode.*/ - chnWrite(&SDU1, buf, sizeof buf - 1); -#else - /* Writing in buffer mode.*/ - (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); - memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); - obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); -#endif - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - systime_t time; - - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(time); - palSetPad(GPIO_LED_RED, PIN_LED_RED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Turn off the RGB LED. - */ - palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ - palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ - palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, spawning shells. - */ - while (true) { - if (SDU1.config->usbp->state == USB_ACTIVE) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg1); - chThdWait(shelltp); /* Waiting termination. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h deleted file mode 100644 index 42c9361..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 0 -/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 1 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c deleted file mode 100644 index 3093640..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0179, /* idVendor. */ - 0x0001, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(2+2*7), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(2+5*2), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - chSysLockFromISR(); - - /* Disconnection event on suspend.*/ - sduDisconnectI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - sof_handler -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h deleted file mode 100644 index 5aa501e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; -extern SerialUSBDriver SDU1; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile deleted file mode 100644 index 16025f3..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include ./board/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL27Z256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c deleted file mode 100644 index 0f34452..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -const PALConfig pal_default_config = -{ - .ports = { - { - /* - * PORTA setup. - * - * on pads: PTA1, PTA2, PTA5, PTA18, PTA19 - * - * PTA0/3 SWD (default SWD, ALT_7: SWD, ALT_1: PTA0/3) - * PTA4 NMI button (default NMI_b, ALT_1: PTA4) - * PTA20 RESET button (default RESET, ALT_7: RESET, ALT_1: PTA20) - */ - .port = IOPORT1, - .pads = { - PAL_MODE_ALTERNATIVE_7, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, - PAL_MODE_ALTERNATIVE_7, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_ALTERNATIVE_7, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTB setup. - * - * on pads: PTB0, PTB1 - * LED: PTB18 - */ - .port = IOPORT2, - .pads = { - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTC setup. - * - * on pads: PTC1, PTC2, PTC3, PTC6, PTC7, PTC8, PTC9 - */ - .port = IOPORT3, - .pads = { - PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, - PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, - PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTD setup. - * - * on pads: PTD0 - PTD7 - */ - .port = IOPORT4, - .pads = { - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - }, - }, - { - /* - * PORTE setup. - * - * on pads: PTE0, PTE1, PTE24, PTE25, PTE29, PTE30 - */ - .port = IOPORT5, - .pads = { - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_OUTPUT_PUSHPULL, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, - PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, - PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_PULLUP, - PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, - }, - }, - }, -}; -#endif - -/** - * @brief Early initialization code. - * @details This initialization must be performed just after stack setup - * and before any other initialization. - */ -void __early_init(void) { - - kl2x_clock_init(); -} - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h deleted file mode 100644 index 1c61915..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a custom KL27Z breakout board. - */ - -/* - * Board identifier. - */ -#define BOARD_KL27Z_BREAKOUT -#define BOARD_NAME "Custom KL27Z breakout" - -/* - * MCU type - */ -#define KL27Zxxx - -/* - * Onboard features. - */ -#define GPIO_LED IOPORT2 -#define PIN_LED 18 -#define GPIO_BUTTON IOPORT1 -#define PIN_BUTTON 4 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk deleted file mode 100644 index 14102c4..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ./board/board.c - -# Required include directories -BOARDINC = ./board diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h deleted file mode 100644 index 41259a0..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL27Z/BLINK/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh deleted file mode 100644 index 8b0f26f..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/bash - -if [ -z `which blhost` ]; then - echo "You'll need to get the 'blhost' utility from Freescale." - echo 'http://www.freescale.com/products/arm-processors/kinetis-cortex-m/kinetis-symbols-footprints-and-models/kinetis-bootloader:KBOOT' - exit 1 -fi - -if [ ! -f build/ch.bin ]; then - echo "Perhaps you should compile the firmware first." - exit 2 -fi - -if [[ `blhost -u -- get-property 1` == *"cannot open USB HID device"* ]]; then - echo "Perhaps you should put the device in the bootloader mode first." - exit 3 -fi - -echo "-> Erasing flash..." -blhost -u -- flash-erase-all - -echo "-> Flashing firmware..." -blhost -u -- write-memory 0 build/ch.bin - -echo "-> Resetting MCU (allow 5 seconds for the firmware to start)..." -blhost -u -- reset diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h deleted file mode 100644 index 2e0b28c..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file KL27Z/BLINK/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c deleted file mode 100644 index 7af54b6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - ChibiOS/RT KL27 example - Copyright (C) 2015 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -/* - * Blink thread - */ -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - (void)arg; - - while(TRUE) { - palTogglePad(GPIO_LED, PIN_LED); - chThdSleepMilliseconds(700); - } -} - -/* - * Check button thread - */ -static THD_WORKING_AREA(waButtonThread, 128); -static THD_FUNCTION(ButtonThread, arg) { - (void)arg; - chRegSetThreadName("buttonThread"); - - uint8_t newstate, state = PAL_HIGH; - - while(true) { - if(palReadPad(GPIO_BUTTON, PIN_BUTTON) != state) { - chThdSleepMilliseconds(20); /* debounce */ - newstate = palReadPad(GPIO_BUTTON, PIN_BUTTON); - if(newstate != state) { - state = newstate; - if(newstate == PAL_LOW) { - // palTogglePad(GPIO_LED, PIN_LED); - /* jump to bootloader */ - /* force boot from ROM */ - RCM->FM = RCM_FM_FORCEROM(2); - /* request RESET */ - #define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 - SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; - } - } - } - chThdSleepMilliseconds(20); - } -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Create the blink thread. - */ - chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); - - /* - * Create the button check thread. - */ - chThdCreateStatic(waButtonThread, sizeof(waButtonThread), NORMALPRIO, ButtonThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while(TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h deleted file mode 100644 index 7048564..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* High-frequency internal RC, 48MHz, possible USB clock recovery */ -#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_HIRC -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#define KINETIS_CLKDIV1_OUTDIV1 1 -#endif - -#if 0 -/* Low-frequency internal RC, 8 MHz mode */ -#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_LIRC8M -#define KINETIS_SYSCLK_FREQUENCY 8000000UL -#define KINETIS_CLKDIV1_OUTDIV1 1 -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -/* - * Kinetis FOPT configuration byte - */ -/* for KL27: */ -// #define KINETIS_NV_FOPT_BYTE 0x3D -/* NV_FOPT: bit7-6/BOOTSRC_SEL=0b00 (11=from ROM; 00=from FLASH) - bit5/FAST_INIT=1, bit4/LPBOOT1=1, - bit3/RESET_PIN_CFG=1, bit2/NMI_DIS=1, - bit1/BOOTPIN_OPT=0, bit0/LPBOOT0=1 */ -/* BOOTPIN_OPT: 1=boot depends on BOOTSRC_SEL - 0=boot samples BOOTCFG0=NMI pin */ -/* Boot sequence, page 88 of manual: - * - If the NMI/BOOTCFG0 input is high or the NMI function is disabled in FTFA_FOPT, the CPU begins execution at the PC location. - * - If the NMI/BOOTCFG0 input is low, the NMI function is enabled in FTFA_FOPT, and FTFA_FOPT[BOOTPIN_OPT] = 1, this results in an NMI interrupt. The processor executes an Exception Entry and reads the NMI interrupt handler address from vector-table offset 8. The CPU begins execution at the NMI interrupt handler. - * - When FTFA_FOPT[BOOTPIN_OPT] = 0, it forces boot from ROM if NMI/BOOTCFG0 pin set to 0. - * - * Observed behaviour: - * - when BOOTPIN_OPT=0, BOOTSRC_SEL still matters: - * - if 0b11 (from ROM), it still boots from ROM, even if BOOTCFG0 pin - * is high/floating, but leaves ROM and runs user app after - * 5 seconds delay. - * - if 0b00 (from FLASH), reset/powerup jumps to user app unless - * BOOTCFG0 pin is asserted. - * - in any case, reset when in bootloader induces the 5 second delay - * before starting the user app. - * - */ - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile deleted file mode 100644 index 884d20e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader -LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, -# 0xc00 for a 3k bootloader -UDEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h deleted file mode 100644 index b2448a9..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MCHCK/BOOTLOADER/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h deleted file mode 100644 index ef54a5d..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MCHCK/BOOTLOADER/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c deleted file mode 100644 index a3729b7..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#define BTN_GPIO TEENSY_PIN2_IOPORT -#define BTN_PIN TEENSY_PIN2 - -/* - * Jump to bootloader on MCHCK. - */ -#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 -const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff"; - -void jump_to_bootloader(void) { - __builtin_memcpy((void *)VBAT, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); - // request reset - SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; -} - -/* - * Blink thread. - */ - -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - (void)arg; - uint8_t i; - - // while(TRUE) { - for(i=0; i<10; i++) { - palTogglePad(GPIOB, GPIOB_LED); - chThdSleepMilliseconds(700); - } - jump_to_bootloader(); -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Create the blink thread. - */ - chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while(TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h deleted file mode 100644 index 6b69edb..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 1 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 - -/* - * PWM driver system settings. - */ -#define KINETIS_PWM_USE_FTM0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile deleted file mode 100644 index 884d20e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader -LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, -# 0xc00 for a 3k bootloader -UDEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md deleted file mode 100644 index 6367722..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md +++ /dev/null @@ -1,7 +0,0 @@ -# "Soft" PWM demo - -The PWM in this demo is "soft", meaning that it does use a hardware timer to run, but the output is not directly routed to a pin; a callback functions which turn a LED on and off are used instead. - -## Notes - -The brightness percentages it goes only up to 9900 (99%) instead of 10000 (100%); otherwise there is a noticeable blink in the top of the cycle. The reason is that the on/off callback functions take too long to execute for this kind of (relatively fast) timer. Likewise, '0' (0%) in the cycle actually means that the LED doesn't get turned off, because the channel notification function that turns the LED off doesn't get called. So in a setup like this one, '1' should be the minimum; although it does mean that the LED is never fully off. diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h deleted file mode 100644 index 034c6cc..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MCHCK/PWM/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h deleted file mode 100644 index f691656..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MCHCK/PWM/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c deleted file mode 100644 index f92512e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#define PWM_DRIVER PWMD1 - -static void pwmpcb(PWMDriver *pwmp) { - (void)pwmp; - palSetLine(LINE_LED); -} - -static void pwmc0cb(PWMDriver *pwmp) { - (void)pwmp; - palClearLine(LINE_LED); -} - -static PWMConfig pwmcfg = { - 24000000, /* 24MHz PWM clock frequency. */ - 12000, /* Initial PWM period 1ms */ - pwmpcb, - { - {PWM_OUTPUT_DISABLED, pwmc0cb}, - {PWM_OUTPUT_DISABLED, NULL}, - }, -}; - -/* Breathing Sleep LED brighness(PWM On period) table - * - * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 - * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } - */ -/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (9900*x/m).to_i+1}; p a" */ -#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ -#define TABLE_SIZE 256 -static const uint16_t breathing_table[TABLE_SIZE] = { - 1, 1, 2, 5, 8, 12, 17, 24, 31, 39, 48, 58, 69, 81, 95, 109, 124, 140, 158, 177, 196, 217, 239, 263, 287, 313, 340, 369, 399, 430, 463, 497, 532, 570, 608, 649, 691, 734, 779, 827, 875, 926, 979, 1033, 1090, 1148, 1209, 1271, 1336, 1403, 1472, 1543, 1617, 1693, 1771, 1852, 1935, 2021, 2109, 2199, 2292, 2387, 2486, 2586, 2689, 2795, 2903, 3014, 3127, 3243, 3362, 3482, 3606, 3731, 3859, 3989, 4122, 4256, 4392, 4531, 4671, 4813, 4957, 5102, 5248, 5396, 5545, 5694, 5845, 5995, 6147, 6298, 6449, 6600, 6751, 6901, 7050, 7198, 7344, 7489, 7632, 7772, 7911, 8046, 8179, 8309, 8435, 8557, 8676, 8790, 8900, 9005, 9105, 9201, 9291, 9375, 9454, 9527, 9593, 9654, 9708, 9756, 9797, 9831, 9859, 9880, 9894, 9900, 9901, 9894, 9880, 9859, 9831, 9797, 9756, 9708, 9654, 9593, 9527, 9454, 9375, 9291, 9201, 9105, 9005, 8900, 8790, 8676, 8557, 8435, 8309, 8179, 8046, 7911, 7772, 7632, 7489, 7344, 7198, 7050, 6901, 6751, 6600, 6449, 6298, 6147, 5995, 5845, 5694, 5545, 5396, 5248, 5102, 4957, 4813, 4671, 4531, 4392, 4256, 4122, 3989, 3859, 3731, 3606, 3482, 3362, 3243, 3127, 3014, 2903, 2795, 2689, 2586, 2486, 2387, 2292, 2199, 2109, 2021, 1935, 1852, 1771, 1693, 1617, 1543, 1472, 1403, 1336, 1271, 1209, 1148, 1090, 1033, 979, 926, 875, 827, 779, 734, 691, 649, 608, 570, 532, 497, 463, 430, 399, 369, 340, 313, 287, 263, 239, 217, 196, 177, 158, 140, 124, 109, 95, 81, 69, 58, 48, 39, 31, 24, 17, 12, 8, 5, 2, 1, 1 -}; - -uint16_t table_pos = 0; - -static THD_WORKING_AREA(waBreatheThread, 128); -static THD_FUNCTION(BreatheThread, arg) { - (void)arg; - chRegSetThreadName("breatheThread"); - - while(!chThdShouldTerminateX()) { - pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - table_pos = (table_pos+1) % TABLE_SIZE; - chThdSleepMilliseconds(BREATHE_STEP); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initialize the PWM driver. - */ - pwmStart(&PWM_DRIVER, &pwmcfg); - pwmEnablePeriodicNotification(&PWM_DRIVER); - - /* - * Starts the PWM channel 0; turn the LED off. - */ - pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER, 0)); - pwmEnableChannelNotification(&PWM_DRIVER, 0); // MUST be before EnableChannel... - - /* - * Create the breathe thread. - */ - thread_t *breathe_thread_p; - breathe_thread_p = chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (!chThdShouldTerminateX()) { - chThdSleepMilliseconds(500); - } - - chThdTerminate(breathe_thread_p); - chThdSleepMilliseconds(2*BREATHE_STEP); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWM_DRIVER, 0); - pwmStop(&PWM_DRIVER); - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h deleted file mode 100644 index 6b69edb..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 1 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 - -/* - * PWM driver system settings. - */ -#define KINETIS_PWM_USE_FTM0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile deleted file mode 100644 index b4d1ef8..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile +++ /dev/null @@ -1,228 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader -LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - usbcfg.c \ - main.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, -# 0xc00 for a 3k bootloader -UDEFS = -DCORTEX_VTOR_INIT=0x00001000 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h deleted file mode 100644 index 7371b49..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h +++ /dev/null @@ -1,513 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MCHCK/USB_SERIAL/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf deleted file mode 100644 index 4ae7d0b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="ChTsy" -DRIVERFILENAME ="usbser" -MFGNAME="NopeLab" -INSTDISK="ChTsy CDC driver" -DESCRIPTION="ChTsy CDC driver" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h deleted file mode 100644 index 466af01..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file MCHCK/USB_SERIAL/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/* - * @brief Enable debugging messages over SD1. - * - * @note Requires HAL_USE_SERIAL. - */ -#if HAL_USE_SERIAL -#define DEBUG_USB -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c deleted file mode 100644 index 56e02af..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "usbcfg.h" - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { -#if 1 - /* Writing in channel mode.*/ - chnWrite(&SDU1, buf, sizeof buf - 1); -#else - /* Writing in buffer mode.*/ - (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); - memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); - obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); -#endif - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - systime_t time; - - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOB, GPIOB_LED); - chThdSleepMilliseconds(time); - palSetPad(GPIOB, GPIOB_LED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, spawning shells. - */ - while (true) { - if (SDU1.config->usbp->state == USB_ACTIVE) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg1); - chThdWait(shelltp); /* Waiting termination. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h deleted file mode 100644 index caf4228..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -#define KINETIS_NO_INIT FALSE - -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 1 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c deleted file mode 100644 index 3093640..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0179, /* idVendor. */ - 0x0001, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(2+2*7), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(2+5*2), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - chSysLockFromISR(); - - /* Disconnection event on suspend.*/ - sduDisconnectI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - sof_handler -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h deleted file mode 100644 index 5aa501e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; -extern SerialUSBDriver SDU1; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile deleted file mode 100644 index 6510052..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h deleted file mode 100644 index caae0c2..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/ADC/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h deleted file mode 100644 index ebc0331..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/ADC/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c deleted file mode 100644 index 7a2dc3a..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 2 -#define ADC_GRP1_BUF_DEPTH 1 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static virtual_timer_t vt; - -static void ledoff(void *p) { - - (void)p; - palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); -} - -static void adc_end_cb(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - (void)n; - - /* - * The bandgap value represents the ADC reading for 1.0V - */ - uint16_t sensor = buffer[0]; - uint16_t bandgap = buffer[1]; - - /* - * The v25 value is the voltage reading at 25C, it comes from the ADC - * electricals table in the processor manual. V25 is in millivolts. - */ - int32_t v25 = 716; - - /* - * The m value is slope of the temperature sensor values, again from - * the ADC electricals table in the processor manual. - * M in microvolts per degree. - */ - int32_t m = 1620; - - /* - * Divide the temperature sensor reading by the bandgap to get - * the voltage for the ambient temperature in millivolts. - */ - int32_t vamb = (sensor * 1000) / bandgap; - - /* - * This formula comes from the reference manual. - * Temperature is in millidegrees C. - */ - int32_t delta = (((vamb - v25) * 1000000) / m); - int32_t temp = 25000 - delta; - - palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chSysLockFromISR(); - chVTResetI(&vt); - if (temp < 19000) { - chVTSetI(&vt, MS2ST(10), ledoff, NULL); - } else if (temp > 28000) { - chVTSetI(&vt, MS2ST(20), ledoff, NULL); - } else { - chVTSetI(&vt, MS2ST(40), ledoff, NULL); - } - chSysUnlockFromISR(); -} - - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - */ -static const ADCConversionGroup adcgrpcfg1 = { - false, - ADC_GRP1_NUM_CHANNELS, - adc_end_cb, - NULL, - ADC_TEMP_SENSOR | ADC_BANDGAP, - /* CFG1 Regiser - ADCCLK = SYSCLK / 16, 16 bits per sample */ - ADCx_CFG1_ADIV(ADCx_CFG1_ADIV_DIV_8) | - ADCx_CFG1_ADICLK(ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2) | - ADCx_CFG1_MODE(ADCx_CFG1_MODE_16_BITS), - /* SC3 Register - Average 32 readings per sample */ - ADCx_SC3_AVGE | - ADCx_SC3_AVGS(ADCx_SC3_AVGS_AVERAGE_32_SAMPLES) -}; - -static const ADCConfig adccfg1 = { - /* Perform initial calibration */ - true -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the ADC1 driver. - */ - adcStart(&ADCD1, &adccfg1); - - while (!chThdShouldTerminateX()) { - /* - * ADC linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - - chThdSleepMilliseconds(1000); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h deleted file mode 100644 index eefa840..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * ADC driver system settings. - */ -#define KINETIS_ADC_USE_ADC0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile deleted file mode 100644 index fa5084c..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - eeprom.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 deleted file mode 100644 index 78fe392..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - eeprom.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md deleted file mode 100644 index 7f01bac..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md +++ /dev/null @@ -1,8 +0,0 @@ -# Teensy 3.0 EEPROM via FlexRAM example - -FlexRAM, which is present on K20x MCUs, is configured to EEPROM mode, so it behaves like EEPROM. The maximum available size is 2K, but explicitly using a smaller chunk enables wear-levelling and increases write endurance. - - -## Credits - -Most of the actual EEPROM code is from [PJRC/Teensyduino](https://www.pjrc.com/teensy/teensyduino.html). \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h deleted file mode 100644 index ea87df8..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/EEPROM_EMU/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c deleted file mode 100644 index c78b39f..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Eeprom emulation for K20x chips. - * (c) 2015 flabbergast - * Most of the code is from PJRC/Teensyduino (license below) - */ - -/* Teensyduino Core Library - * http://www.pjrc.com/teensy/ - * Copyright (c) 2013 PJRC.COM, LLC. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * 1. The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * 2. If the Software is incorporated into a build system that allows - * selection among a list of target devices, then similar target - * devices manufactured by PJRC.COM must be included in the list of - * target devices and selectable in the same manner. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include "ch.h" -#include "hal.h" - -// The EEPROM is really RAM with a hardware-based backup system to -// flash memory. Selecting a smaller size EEPROM allows more wear -// leveling, for higher write endurance. If you edit this file, -// set this to the smallest size your application can use. Also, -// due to Freescale's implementation, writing 16 or 32 bit words -// (aligned to 2 or 4 byte boundaries) has twice the endurance -// compared to writing 8 bit bytes. -// -#define EEPROM_SIZE 32 - -// Writing unaligned 16 or 32 bit data is handled automatically when -// this is defined, but at a cost of extra code size. Without this, -// any unaligned write will cause a hard fault exception! If you're -// absolutely sure all 16 and 32 bit writes will be aligned, you can -// remove the extra unnecessary code. -// -#define HANDLE_UNALIGNED_WRITES - -// Minimum EEPROM Endurance -// ------------------------ -#if (EEPROM_SIZE == 2048) // 35000 writes/byte or 70000 writes/word - #define EEESIZE 0x33 -#elif (EEPROM_SIZE == 1024) // 75000 writes/byte or 150000 writes/word - #define EEESIZE 0x34 -#elif (EEPROM_SIZE == 512) // 155000 writes/byte or 310000 writes/word - #define EEESIZE 0x35 -#elif (EEPROM_SIZE == 256) // 315000 writes/byte or 630000 writes/word - #define EEESIZE 0x36 -#elif (EEPROM_SIZE == 128) // 635000 writes/byte or 1270000 writes/word - #define EEESIZE 0x37 -#elif (EEPROM_SIZE == 64) // 1275000 writes/byte or 2550000 writes/word - #define EEESIZE 0x38 -#elif (EEPROM_SIZE == 32) // 2555000 writes/byte or 5110000 writes/word - #define EEESIZE 0x39 -#endif - -void eeprom_initialize(void) -{ - uint32_t count=0; - uint16_t do_flash_cmd[] = { - 0xf06f, 0x037f, 0x7003, 0x7803, - 0xf013, 0x0f80, 0xd0fb, 0x4770}; - uint8_t status; - - if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) { - // FlexRAM is configured as traditional RAM - // We need to reconfigure for EEPROM usage - FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command - FTFL->FCCOB4 = EEESIZE; // EEPROM Size - FTFL->FCCOB5 = 0x03; // 0K for Dataflash, 32K for EEPROM backup - __disable_irq(); - // do_flash_cmd() must execute from RAM. Luckily the C syntax is simple... - (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT)); - __enable_irq(); - status = FTFL->FSTAT; - if (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL)) { - FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL)); - return; // error - } - } - // wait for eeprom to become ready (is this really necessary?) - while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { - if (++count > 20000) break; - } -} - -#define FlexRAM ((uint8_t *)0x14000000) - -uint8_t eeprom_read_byte(const uint8_t *addr) -{ - uint32_t offset = (uint32_t)addr; - if (offset >= EEPROM_SIZE) return 0; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); - return FlexRAM[offset]; -} - -uint16_t eeprom_read_word(const uint16_t *addr) -{ - uint32_t offset = (uint32_t)addr; - if (offset >= EEPROM_SIZE-1) return 0; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); - return *(uint16_t *)(&FlexRAM[offset]); -} - -uint32_t eeprom_read_dword(const uint32_t *addr) -{ - uint32_t offset = (uint32_t)addr; - if (offset >= EEPROM_SIZE-3) return 0; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); - return *(uint32_t *)(&FlexRAM[offset]); -} - -void eeprom_read_block(void *buf, const void *addr, uint32_t len) -{ - uint32_t offset = (uint32_t)addr; - uint8_t *dest = (uint8_t *)buf; - uint32_t end = offset + len; - - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); - if (end > EEPROM_SIZE) end = EEPROM_SIZE; - while (offset < end) { - *dest++ = FlexRAM[offset++]; - } -} - -int eeprom_is_ready(void) -{ - return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0; -} - -static void flexram_wait(void) -{ - while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { - // TODO: timeout - } -} - -void eeprom_write_byte(uint8_t *addr, uint8_t value) -{ - uint32_t offset = (uint32_t)addr; - - if (offset >= EEPROM_SIZE) return; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); - if (FlexRAM[offset] != value) { - FlexRAM[offset] = value; - flexram_wait(); - } -} - -void eeprom_write_word(uint16_t *addr, uint16_t value) -{ - uint32_t offset = (uint32_t)addr; - - if (offset >= EEPROM_SIZE-1) return; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); -#ifdef HANDLE_UNALIGNED_WRITES - if ((offset & 1) == 0) { -#endif - if (*(uint16_t *)(&FlexRAM[offset]) != value) { - *(uint16_t *)(&FlexRAM[offset]) = value; - flexram_wait(); - } -#ifdef HANDLE_UNALIGNED_WRITES - } else { - if (FlexRAM[offset] != value) { - FlexRAM[offset] = value; - flexram_wait(); - } - if (FlexRAM[offset + 1] != (value >> 8)) { - FlexRAM[offset + 1] = value >> 8; - flexram_wait(); - } - } -#endif -} - -void eeprom_write_dword(uint32_t *addr, uint32_t value) -{ - uint32_t offset = (uint32_t)addr; - - if (offset >= EEPROM_SIZE-3) return; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); -#ifdef HANDLE_UNALIGNED_WRITES - switch (offset & 3) { - case 0: -#endif - if (*(uint32_t *)(&FlexRAM[offset]) != value) { - *(uint32_t *)(&FlexRAM[offset]) = value; - flexram_wait(); - } - return; -#ifdef HANDLE_UNALIGNED_WRITES - case 2: - if (*(uint16_t *)(&FlexRAM[offset]) != value) { - *(uint16_t *)(&FlexRAM[offset]) = value; - flexram_wait(); - } - if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) { - *(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16; - flexram_wait(); - } - return; - default: - if (FlexRAM[offset] != value) { - FlexRAM[offset] = value; - flexram_wait(); - } - if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) { - *(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8; - flexram_wait(); - } - if (FlexRAM[offset + 3] != (value >> 24)) { - FlexRAM[offset + 3] = value >> 24; - flexram_wait(); - } - } -#endif -} - -void eeprom_write_block(const void *buf, void *addr, uint32_t len) -{ - uint32_t offset = (uint32_t)addr; - const uint8_t *src = (const uint8_t *)buf; - - if (offset >= EEPROM_SIZE) return; - if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); - if (len >= EEPROM_SIZE) len = EEPROM_SIZE; - if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset; - while (len > 0) { - uint32_t lsb = offset & 3; - if (lsb == 0 && len >= 4) { - // write aligned 32 bits - uint32_t val32; - val32 = *src++; - val32 |= (*src++ << 8); - val32 |= (*src++ << 16); - val32 |= (*src++ << 24); - if (*(uint32_t *)(&FlexRAM[offset]) != val32) { - *(uint32_t *)(&FlexRAM[offset]) = val32; - flexram_wait(); - } - offset += 4; - len -= 4; - } else if ((lsb == 0 || lsb == 2) && len >= 2) { - // write aligned 16 bits - uint16_t val16; - val16 = *src++; - val16 |= (*src++ << 8); - if (*(uint16_t *)(&FlexRAM[offset]) != val16) { - *(uint16_t *)(&FlexRAM[offset]) = val16; - flexram_wait(); - } - offset += 2; - len -= 2; - } else { - // write 8 bits - uint8_t val8 = *src++; - if (FlexRAM[offset] != val8) { - FlexRAM[offset] = val8; - flexram_wait(); - } - offset++; - len--; - } - } -} - -/* -void do_flash_cmd(volatile uint8_t *fstat) -{ - *fstat = 0x80; - while ((*fstat & 0x80) == 0) ; // wait -} -00000000 : - 0: f06f 037f mvn.w r3, #127 ; 0x7f - 4: 7003 strb r3, [r0, #0] - 6: 7803 ldrb r3, [r0, #0] - 8: f013 0f80 tst.w r3, #128 ; 0x80 - c: d0fb beq.n 6 - e: 4770 bx lr -*/ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h deleted file mode 100644 index 1bd714e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Eeprom emulation for K20x chips. - * (c) 2015 flabbergast - * Most of the code is from PJRC/Teensyduino (license in eeprom.c) - */ - -#ifndef _EEPROM_H_ -#define _EEPROM_H_ - -void eeprom_initialize(void); -int eeprom_is_ready(void); -uint8_t eeprom_read_byte(const uint8_t *addr); -uint16_t eeprom_read_word(const uint16_t *addr); -uint32_t eeprom_read_dword(const uint32_t *addr); -void eeprom_read_block(void *buf, const void *addr, uint32_t len); -void eeprom_write_byte(uint8_t *addr, uint8_t data); -void eeprom_write_word(uint16_t *addr, uint16_t value); -void eeprom_write_dword(uint32_t *addr, uint32_t value); -void eeprom_write_block(const void *buf, void *addr, uint32_t len); - -#endif /* _EEPROM_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h deleted file mode 100644 index 5cc1b57..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/EEPROM_EMU/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c deleted file mode 100644 index e1ef889..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#include "eeprom.h" - -#define LED_GPIO TEENSY_PIN13_IOPORT -#define LED_PIN TEENSY_PIN13 - -uint8_t n_of_blinks; - -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - (void)arg; - uint8_t i; - - for(i=0; i - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile deleted file mode 100644 index 6510052..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h deleted file mode 100644 index 0389bed..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/EXT/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h deleted file mode 100644 index eba8b32..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/EXT/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c deleted file mode 100644 index 3903897..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -static void ledoff(void *p) { - - (void)p; - palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); -} - -static virtual_timer_t vt; - -/* Triggered when the Teensy's pin 12 (PC7) changes; The LED is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - (void)extp; - (void)channel; - palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chSysLockFromISR(); - chVTResetI(&vt); - /* LED set to OFF after 500mS.*/ - chVTSetI(&vt, MS2ST(500), ledoff, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES|EXT_CH_MODE_AUTOSTART, extcb1, PORTC, 7} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 10 seconds intervals. - */ - while (!chThdShouldTerminateX()) { - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(10000); - extChannelEnable(&EXTD1, 0); - chThdSleepMilliseconds(10000); - } - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h deleted file mode 100644 index 147622e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * EXT driver system settings. - */ -#define KINETIS_EXTI_NUM_CHANNELS 1 -#define KINETIS_EXT_PORTA_IRQ_PRIORITY 12 -#define KINETIS_EXT_PORTB_IRQ_PRIORITY 12 -#define KINETIS_EXT_PORTC_IRQ_PRIORITY 12 -#define KINETIS_EXT_PORTD_IRQ_PRIORITY 12 -#define KINETIS_EXT_PORTE_IRQ_PRIORITY 12 - -/* K20 64pin */ -#define KINETIS_EXT_PORTA_WIDTH 20 -#define KINETIS_EXT_PORTB_WIDTH 20 -#define KINETIS_EXT_PORTC_WIDTH 12 -#define KINETIS_EXT_PORTD_WIDTH 8 -#define KINETIS_EXT_PORTE_WIDTH 2 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile deleted file mode 100644 index 6510052..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h deleted file mode 100644 index b2ed194..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/GPT/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h deleted file mode 100644 index 80de20c..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/GPT/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c deleted file mode 100644 index 4609f37..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -/* - * GPT1 callback. - */ -static void gpt1cb(GPTDriver *gptp) { - - (void)gptp; - palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); -} - -static const GPTConfig gpt1cfg = { - 10000, /* 10kHz timer clock.*/ - gpt1cb /* Timer callback.*/ -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the GPT driver 1. - */ - gptStart(&GPTD1, &gpt1cfg); - gptStartContinuous(&GPTD1, 5000); /* 500ms */ - //~ gptPolledDelay(&GPTD1, 10); /* Small delay.*/ - - /* - * Normal main() thread activity, it changes the GPT1 period every - * five seconds. - */ - while (!chThdShouldTerminateX()) { - chThdSleepMilliseconds(5000); - gptChangeInterval(&GPTD1,gptGetIntervalX(&GPTD1)/2); /* 25ms */ - chThdSleepMilliseconds(5000); - gptChangeInterval(&GPTD1,gptGetIntervalX(&GPTD1)*2); /* 50ms */ - } - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h deleted file mode 100644 index bb2f8bf..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * GPT driver system settings. - */ -#define KINETIS_GPT_USE_PIT0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile deleted file mode 100644 index 6510052..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h deleted file mode 100644 index dda26e1..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/PWM/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h deleted file mode 100644 index 9cb0ac9..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/PWM/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c deleted file mode 100644 index bef46a2..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#define PWM_DRIVER PWMD1 - -static void pwmpcb(PWMDriver *pwmp) { - (void)pwmp; - palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); -} - -static void pwmc0cb(PWMDriver *pwmp) { - (void)pwmp; - palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); -} - -static PWMConfig pwmcfg = { - 24000000, /* 24MHz PWM clock frequency. */ - 12000, /* Initial PWM period 1ms */ - pwmpcb, - { - {PWM_OUTPUT_DISABLED, pwmc0cb}, - {PWM_OUTPUT_DISABLED, NULL}, - }, -}; - -/* Breathing Sleep LED brighness(PWM On period) table - * - * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 - * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } - */ -/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (9900*x/m).to_i+1}; p a" */ -#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ -#define TABLE_SIZE 256 -static const uint16_t breathing_table[TABLE_SIZE] = { - 1, 1, 2, 5, 8, 12, 17, 24, 31, 39, 48, 58, 69, 81, 95, 109, 124, 140, 158, 177, 196, 217, 239, 263, 287, 313, 340, 369, 399, 430, 463, 497, 532, 570, 608, 649, 691, 734, 779, 827, 875, 926, 979, 1033, 1090, 1148, 1209, 1271, 1336, 1403, 1472, 1543, 1617, 1693, 1771, 1852, 1935, 2021, 2109, 2199, 2292, 2387, 2486, 2586, 2689, 2795, 2903, 3014, 3127, 3243, 3362, 3482, 3606, 3731, 3859, 3989, 4122, 4256, 4392, 4531, 4671, 4813, 4957, 5102, 5248, 5396, 5545, 5694, 5845, 5995, 6147, 6298, 6449, 6600, 6751, 6901, 7050, 7198, 7344, 7489, 7632, 7772, 7911, 8046, 8179, 8309, 8435, 8557, 8676, 8790, 8900, 9005, 9105, 9201, 9291, 9375, 9454, 9527, 9593, 9654, 9708, 9756, 9797, 9831, 9859, 9880, 9894, 9900, 9901, 9894, 9880, 9859, 9831, 9797, 9756, 9708, 9654, 9593, 9527, 9454, 9375, 9291, 9201, 9105, 9005, 8900, 8790, 8676, 8557, 8435, 8309, 8179, 8046, 7911, 7772, 7632, 7489, 7344, 7198, 7050, 6901, 6751, 6600, 6449, 6298, 6147, 5995, 5845, 5694, 5545, 5396, 5248, 5102, 4957, 4813, 4671, 4531, 4392, 4256, 4122, 3989, 3859, 3731, 3606, 3482, 3362, 3243, 3127, 3014, 2903, 2795, 2689, 2586, 2486, 2387, 2292, 2199, 2109, 2021, 1935, 1852, 1771, 1693, 1617, 1543, 1472, 1403, 1336, 1271, 1209, 1148, 1090, 1033, 979, 926, 875, 827, 779, 734, 691, 649, 608, 570, 532, 497, 463, 430, 399, 369, 340, 313, 287, 263, 239, 217, 196, 177, 158, 140, 124, 109, 95, 81, 69, 58, 48, 39, 31, 24, 17, 12, 8, 5, 2, 1, 1 -}; - -uint16_t table_pos = 0; - -static THD_WORKING_AREA(waBreatheThread, 128); -static THD_FUNCTION(BreatheThread, arg) { - (void)arg; - chRegSetThreadName("breatheThread"); - - while(!chThdShouldTerminateX()) { - pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - table_pos = (table_pos+1) % TABLE_SIZE; - chThdSleepMilliseconds(BREATHE_STEP); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initialize the PWM driver. - */ - pwmStart(&PWM_DRIVER, &pwmcfg); - pwmEnablePeriodicNotification(&PWM_DRIVER); - - /* - * Starts the PWM channel 0; turn the LED off. - */ - pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER, 0)); - pwmEnableChannelNotification(&PWM_DRIVER, 0); // MUST be before EnableChannel... - - /* - * Create the breathe thread. - */ - thread_t *breathe_thread_p; - breathe_thread_p = chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (!chThdShouldTerminateX()) { - chThdSleepMilliseconds(500); - } - - chThdTerminate(breathe_thread_p); - chThdSleepMilliseconds(2*BREATHE_STEP); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWM_DRIVER, 0); - pwmStop(&PWM_DRIVER); - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h deleted file mode 100644 index 9f087dd..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * PWM driver system settings. - */ -#define KINETIS_PWM_USE_FTM0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile deleted file mode 100644 index 6510052..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 deleted file mode 100644 index 5e0f4a6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h deleted file mode 100644 index 95b505a..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/SERIAL/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h deleted file mode 100644 index 6c7a97d..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/SERIAL/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c deleted file mode 100644 index 722a398..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -static THD_WORKING_AREA(waSerEcho, 128); -static THD_FUNCTION(thSerEcho, arg) -{ - (void)arg; - chRegSetThreadName("SerEcho"); - event_listener_t elSerData; - eventflags_t flags; - chEvtRegisterMask((event_source_t *)chnGetEventSource(&SD1), &elSerData, EVENT_MASK(1)); - - while (!chThdShouldTerminateX()) - { - chEvtWaitOneTimeout(EVENT_MASK(1), MS2ST(10)); - flags = chEvtGetAndClearFlags(&elSerData); - if (flags & CHN_INPUT_AVAILABLE) - { - msg_t charbuf; - do - { - charbuf = chnGetTimeout(&SD1, TIME_IMMEDIATE); - if ( charbuf != Q_TIMEOUT ) - { - streamPut(&SD1, charbuf); - } - } - while (charbuf != Q_TIMEOUT); - } - } -} - -SerialConfig s0cfg = -{ - 19200 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates serial 1 (UART0) using the driver default configuration. - */ - sdStart(&SD1, &s0cfg); - - chThdCreateStatic(waSerEcho, sizeof(waSerEcho), NORMALPRIO, thSerEcho, NULL); - - while (!chThdShouldTerminateX()) { - chThdSleepMilliseconds(1000); - palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - sdPut(&SD1,'B'); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h deleted file mode 100644 index 919719b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile deleted file mode 100644 index 055c3dc..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile +++ /dev/null @@ -1,225 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX256.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - usbcfg.c \ - main.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 deleted file mode 100644 index 3135d7c..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 +++ /dev/null @@ -1,225 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MK20DX128.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - usbcfg.c \ - main.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h deleted file mode 100644 index 7d9ace3..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h +++ /dev/null @@ -1,513 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/USB_SERIAL/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf deleted file mode 100644 index 4ae7d0b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="ChTsy" -DRIVERFILENAME ="usbser" -MFGNAME="NopeLab" -INSTDISK="ChTsy CDC driver" -DESCRIPTION="ChTsy CDC driver" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h deleted file mode 100644 index 329f831..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY3_x/USB_SERIAL/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c deleted file mode 100644 index 3ede0a2..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "usbcfg.h" - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { -#if 1 - /* Writing in channel mode.*/ - chnWrite(&SDU1, buf, sizeof buf - 1); -#else - /* Writing in buffer mode.*/ - (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); - memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); - obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); -#endif - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - systime_t time; - - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chThdSleepMilliseconds(time); - palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, spawning shells. - */ - while (true) { - if (SDU1.config->usbp->state == USB_ACTIVE) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg1); - chThdWait(shelltp); /* Waiting termination. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h deleted file mode 100644 index 59e1e82..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c deleted file mode 100644 index 3093640..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0179, /* idVendor. */ - 0x0001, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(2+2*7), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(2+5*2), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - chSysLockFromISR(); - - /* Disconnection event on suspend.*/ - sduDisconnectI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - sof_handler -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h deleted file mode 100644 index 5aa501e..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - (C) 2015-2016 flabbergast - Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; -extern SerialUSBDriver SDU1; - -#endif /* _USBCFG_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile deleted file mode 100644 index f868337..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_LC/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL26Z64.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h deleted file mode 100644 index d6a7bf8..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY_LC/BOOTLOADER/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h deleted file mode 100644 index bd1d2a3..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY_LC/BOOTLOADER/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c deleted file mode 100644 index d2c50e6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#define BTN_GPIO TEENSY_PIN2_IOPORT -#define BTN_PIN TEENSY_PIN2 - -/* - * Jump to bootloader on ARM Teensies. - */ - -static void jump_to_bootloader(void) { - /* __asm__ volatile("bkpt"); */ - /* Same as above, CMSIS notation: */ - __BKPT(0); -} - -/* - * Blink thread. - */ - -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - (void)arg; - uint8_t i; - - // while(TRUE) { - for(i=0; i<5; i++) { - palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chThdSleepMilliseconds(700); - palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); - chThdSleepMilliseconds(700); - } - jump_to_bootloader(); -} - -/* - * Button thread. - */ - -static THD_WORKING_AREA(waButtonThread, 128); -static THD_FUNCTION(ButtonThread, arg) { - (void)arg; - - while(TRUE) { - if(palReadPad(BTN_GPIO, BTN_PIN) == PAL_LOW) { - jump_to_bootloader(); - } - chThdSleepMilliseconds(50); - } -} - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Button init. - */ - palSetPadMode(BTN_GPIO, BTN_PIN, PAL_MODE_INPUT_PULLUP); - - /* - * Create the blink thread. - */ - chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); - - /* - * Create the button thread. - */ - chThdCreateStatic(waButtonThread, sizeof(waButtonThread), NORMALPRIO, ButtonThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while(TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h deleted file mode 100644 index 58a15b3..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld deleted file mode 100644 index fb141f8..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * (C) 2016 flabbergast - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/* - * KL26Z64 memory setup. - */ -MEMORY -{ - flash0 : org = 0x00000000, len = 0x100 - flash1 : org = 0x00000400, len = 0x10 - flash2 : org = 0x00000410, len = 62k - 0x410 - flash3 : org = 0x0000F800, len = 2k - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x1FFFF800, len = 8k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* Flash region for the configuration bytes.*/ -SECTIONS -{ - .cfmprotect : ALIGN(4) SUBALIGN(4) - { - KEEP(*(.cfmconfig)) - } > flash1 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash2); -REGION_ALIAS("XTORS_FLASH_LMA", flash2); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash2); -REGION_ALIAS("TEXT_FLASH_LMA", flash2); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash2); -REGION_ALIAS("RODATA_FLASH_LMA", flash2); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash2); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash2); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -__eeprom_workarea_start__ = ORIGIN(flash3); -__eeprom_workarea_size__ = LENGTH(flash3); -__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile deleted file mode 100644 index a9534fc..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile +++ /dev/null @@ -1,214 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_LC/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT = MKL26Z64.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - eeprom.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md deleted file mode 100644 index 5e11bd1..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md +++ /dev/null @@ -1,7 +0,0 @@ -# Teensy LC EEPROM emulation example - -This example emulates 128 bytes of EEPROM, using 2K of flash. Some wear-levelling is done (see comments in `eeprom.c`). - -## Credits - -Most of the actual EEPROM code is from [PJRC/Teensyduino](https://www.pjrc.com/teensy/teensyduino.html). diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h deleted file mode 100644 index 919e2b0..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY_LC/EEPROM_EMU/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c deleted file mode 100644 index 05ee313..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Eeprom emulation for KL2x chips. - * (c) 2015 flabbergast - * Most of the code is from PJRC/Teensyduino (license below) - * - * Notes: Some wear-levelling is done: - * - emulating 128 bytes of eeprom; i.e. 7 bit "eeprom addresses" - * - using 2048 bytes of flash - * - new values are written consecutively into flash - * as 16bit ("eeprom address",value) pairs - * - if all 2048 bytes of flash is used, it is erased and writes - * start from the beginning again - * - the 2048 bytes of flash used are at the end of the flash - * - BEWARE: there is no protection! Use a custom .ld script - * to make sure this area is never used for code! - */ - -/* Teensyduino Core Library - * http://www.pjrc.com/teensy/ - * Copyright (c) 2013 PJRC.COM, LLC. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sublicense, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * 1. The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * 2. If the Software is incorporated into a build system that allows - * selection among a list of target devices, then similar target - * devices manufactured by PJRC.COM must be included in the list of - * target devices and selectable in the same manner. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include "ch.h" -#include "hal.h" - -#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) - -extern uint32_t __eeprom_workarea_start__; -extern uint32_t __eeprom_workarea_end__; - -#define EEPROM_SIZE 128 - -static uint32_t flashend = 0; - -void eeprom_initialize(void) -{ - const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); - - do { - if (*p++ == 0xFFFF) { - flashend = (uint32_t)(p - 2); - return; - } - } while (p < (uint16_t *)SYMVAL(__eeprom_workarea_end__)); - flashend = (uint32_t)((uint16_t *)SYMVAL(__eeprom_workarea_end__) - 1); -} - -uint8_t eeprom_read_byte(const uint8_t *addr) -{ - uint32_t offset = (uint32_t)addr; - const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); - const uint16_t *end = (const uint16_t *)((uint32_t)flashend); - uint16_t val; - uint8_t data=0xFF; - - if (!end) { - eeprom_initialize(); - end = (const uint16_t *)((uint32_t)flashend); - } - if (offset < EEPROM_SIZE) { - while (p <= end) { - val = *p++; - if ((val & 255) == offset) data = val >> 8; - } - } - return data; -} - -static void flash_write(const uint16_t *code, uint32_t addr, uint32_t data) -{ - // with great power comes great responsibility.... - uint32_t stat; - *(uint32_t *)&(FTFA->FCCOB3) = 0x06000000 | (addr & 0x00FFFFFC); - *(uint32_t *)&(FTFA->FCCOB7) = data; - __disable_irq(); - (*((void (*)(volatile uint8_t *))((uint32_t)code | 1)))(&(FTFA->FSTAT)); - __enable_irq(); - stat = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL); - if (stat) { - FTFA->FSTAT = stat; - } - MCM->PLACR |= MCM_PLACR_CFCC; -} - -void eeprom_write_byte(uint8_t *addr, uint8_t data) -{ - uint32_t offset = (uint32_t)addr; - const uint16_t *p, *end = (const uint16_t *)((uint32_t)flashend); - uint32_t i, val, flashaddr; - uint16_t do_flash_cmd[] = { - 0x2380, 0x7003, 0x7803, 0xb25b, 0x2b00, 0xdafb, 0x4770}; - uint8_t buf[EEPROM_SIZE]; - - if (offset >= EEPROM_SIZE) return; - if (!end) { - eeprom_initialize(); - end = (const uint16_t *)((uint32_t)flashend); - } - if (++end < (uint16_t *)SYMVAL(__eeprom_workarea_end__)) { - val = (data << 8) | offset; - flashaddr = (uint32_t)end; - flashend = flashaddr; - if ((flashaddr & 2) == 0) { - val |= 0xFFFF0000; - } else { - val <<= 16; - val |= 0x0000FFFF; - } - flash_write(do_flash_cmd, flashaddr, val); - } else { - for (i=0; i < EEPROM_SIZE; i++) { - buf[i] = 0xFF; - } - for (p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); p < (uint16_t *)SYMVAL(__eeprom_workarea_end__); p++) { - val = *p; - if ((val & 255) < EEPROM_SIZE) { - buf[val & 255] = val >> 8; - } - } - buf[offset] = data; - for (flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); flashaddr < (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_end__); flashaddr += 1024) { - *(uint32_t *)&(FTFA->FCCOB3) = 0x09000000 | flashaddr; - __disable_irq(); - (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFA->FSTAT)); - __enable_irq(); - val = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL);; - if (val) FTFA->FSTAT = val; - MCM->PLACR |= MCM_PLACR_CFCC; - } - flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); - for (i=0; i < EEPROM_SIZE; i++) { - if (buf[i] == 0xFF) continue; - if ((flashaddr & 2) == 0) { - val = (buf[i] << 8) | i; - } else { - val = val | (buf[i] << 24) | (i << 16); - flash_write(do_flash_cmd, flashaddr, val); - } - flashaddr += 2; - } - flashend = flashaddr; - if ((flashaddr & 2)) { - val |= 0xFFFF0000; - flash_write(do_flash_cmd, flashaddr, val); - } - } -} - -/* -void do_flash_cmd(volatile uint8_t *fstat) -{ - *fstat = 0x80; - while ((*fstat & 0x80) == 0) ; // wait -} -00000000 : - 0: 2380 movs r3, #128 ; 0x80 - 2: 7003 strb r3, [r0, #0] - 4: 7803 ldrb r3, [r0, #0] - 6: b25b sxtb r3, r3 - 8: 2b00 cmp r3, #0 - a: dafb bge.n 4 - c: 4770 bx lr -*/ - - -uint16_t eeprom_read_word(const uint16_t *addr) -{ - const uint8_t *p = (const uint8_t *)addr; - return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8); -} - -uint32_t eeprom_read_dword(const uint32_t *addr) -{ - const uint8_t *p = (const uint8_t *)addr; - return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8) - | (eeprom_read_byte(p+2) << 16) | (eeprom_read_byte(p+3) << 24); -} - -void eeprom_read_block(void *buf, const void *addr, uint32_t len) -{ - const uint8_t *p = (const uint8_t *)addr; - uint8_t *dest = (uint8_t *)buf; - while (len--) { - *dest++ = eeprom_read_byte(p++); - } -} - -int eeprom_is_ready(void) -{ - return 1; -} - -void eeprom_write_word(uint16_t *addr, uint16_t value) -{ - uint8_t *p = (uint8_t *)addr; - eeprom_write_byte(p++, value); - eeprom_write_byte(p, value >> 8); -} - -void eeprom_write_dword(uint32_t *addr, uint32_t value) -{ - uint8_t *p = (uint8_t *)addr; - eeprom_write_byte(p++, value); - eeprom_write_byte(p++, value >> 8); - eeprom_write_byte(p++, value >> 16); - eeprom_write_byte(p, value >> 24); -} - -void eeprom_write_block(const void *buf, void *addr, uint32_t len) -{ - uint8_t *p = (uint8_t *)addr; - const uint8_t *src = (const uint8_t *)buf; - while (len--) { - eeprom_write_byte(p++, *src++); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h deleted file mode 100644 index 74cf07b..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Eeprom emulation for KL2x chips. - * (c) 2015 flabbergast - * Most of the code is from PJRC/Teensyduino (license in eeprom.c) - */ - -#ifndef _EEPROM_H_ -#define _EEPROM_H_ - -void eeprom_initialize(void); -int eeprom_is_ready(void); -uint8_t eeprom_read_byte(const uint8_t *addr); -uint16_t eeprom_read_word(const uint16_t *addr); -uint32_t eeprom_read_dword(const uint32_t *addr); -void eeprom_read_block(void *buf, const void *addr, uint32_t len); -void eeprom_write_byte(uint8_t *addr, uint8_t data); -void eeprom_write_word(uint16_t *addr, uint16_t value); -void eeprom_write_dword(uint32_t *addr, uint32_t value); -void eeprom_write_block(const void *buf, void *addr, uint32_t len); - -#endif /* _EEPROM_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h deleted file mode 100644 index 278db95..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY_LC/EEPROM_EMU/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c deleted file mode 100644 index c827944..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#include "eeprom.h" - -#define LED_GPIO TEENSY_PIN13_IOPORT -#define LED_PIN TEENSY_PIN13 - -uint8_t n_of_blinks; - -static THD_WORKING_AREA(waBlinkThread, 128); -static THD_FUNCTION(BlinkThread, arg) { - (void)arg; - uint8_t i; - - for(i=0; i - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile deleted file mode 100644 index f868337..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_LC/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/MKL26Z64.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0plus - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h deleted file mode 100644 index b18de54..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h +++ /dev/null @@ -1,514 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY_LC/PWM/chconf.h - * @brief Configuration file. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h deleted file mode 100644 index 9cbb6b9..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TEENSY_LC/PWM/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c deleted file mode 100644 index f8e6ba2..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -#include "hal.h" - -#define PWM_DRIVER PWMD1 - -static void pwmpcb(PWMDriver *pwmp) { - (void)pwmp; - palSetLine(LINE_LED); -} - -static void pwmc0cb(PWMDriver *pwmp) { - (void)pwmp; - palClearLine(LINE_LED); -} - -static PWMConfig pwmcfg = { - 12000000, /* 12MHz PWM clock frequency. */ - 12000, /* Initial PWM period 1ms */ - pwmpcb, /* Callback on counter overflow */ - { - {PWM_OUTPUT_DISABLED, pwmc0cb}, /* ch2: mode, callback! */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch2: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch2: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch3: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL}, /* ch4: mode, no callback */ - {PWM_OUTPUT_DISABLED, NULL} /* ch5: mode, no callback */ - }, -}; - -/* Breathing Sleep LED brighness(PWM On period) table - * - * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 - * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } - */ -/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (9900*x/m).to_i+1}; p a" */ -#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ -#define TABLE_SIZE 256 -static const uint16_t breathing_table[TABLE_SIZE] = { - 1, 1, 2, 5, 8, 12, 17, 24, 31, 39, 48, 58, 69, 81, 95, 109, 124, 140, 158, 177, 196, 217, 239, 263, 287, 313, 340, 369, 399, 430, 463, 497, 532, 570, 608, 649, 691, 734, 779, 827, 875, 926, 979, 1033, 1090, 1148, 1209, 1271, 1336, 1403, 1472, 1543, 1617, 1693, 1771, 1852, 1935, 2021, 2109, 2199, 2292, 2387, 2486, 2586, 2689, 2795, 2903, 3014, 3127, 3243, 3362, 3482, 3606, 3731, 3859, 3989, 4122, 4256, 4392, 4531, 4671, 4813, 4957, 5102, 5248, 5396, 5545, 5694, 5845, 5995, 6147, 6298, 6449, 6600, 6751, 6901, 7050, 7198, 7344, 7489, 7632, 7772, 7911, 8046, 8179, 8309, 8435, 8557, 8676, 8790, 8900, 9005, 9105, 9201, 9291, 9375, 9454, 9527, 9593, 9654, 9708, 9756, 9797, 9831, 9859, 9880, 9894, 9900, 9901, 9894, 9880, 9859, 9831, 9797, 9756, 9708, 9654, 9593, 9527, 9454, 9375, 9291, 9201, 9105, 9005, 8900, 8790, 8676, 8557, 8435, 8309, 8179, 8046, 7911, 7772, 7632, 7489, 7344, 7198, 7050, 6901, 6751, 6600, 6449, 6298, 6147, 5995, 5845, 5694, 5545, 5396, 5248, 5102, 4957, 4813, 4671, 4531, 4392, 4256, 4122, 3989, 3859, 3731, 3606, 3482, 3362, 3243, 3127, 3014, 2903, 2795, 2689, 2586, 2486, 2387, 2292, 2199, 2109, 2021, 1935, 1852, 1771, 1693, 1617, 1543, 1472, 1403, 1336, 1271, 1209, 1148, 1090, 1033, 979, 926, 875, 827, 779, 734, 691, 649, 608, 570, 532, 497, 463, 430, 399, 369, 340, 313, 287, 263, 239, 217, 196, 177, 158, 140, 124, 109, 95, 81, 69, 58, 48, 39, 31, 24, 17, 12, 8, 5, 2, 1, 1 -}; - -uint16_t table_pos = 0; - -static THD_WORKING_AREA(waBreatheThread, 128); -static THD_FUNCTION(BreatheThread, arg) { - (void)arg; - chRegSetThreadName("breatheThread"); - - while(!chThdShouldTerminateX()) { - pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); - table_pos = (table_pos+1) % TABLE_SIZE; - chThdSleepMilliseconds(BREATHE_STEP); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initialize the PWM driver. - */ - pwmStart(&PWM_DRIVER, &pwmcfg); - pwmEnablePeriodicNotification(&PWM_DRIVER); - - /* - * Starts the PWM channel 0, turn the LED off. - */ - pwmEnableChannel(&PWM_DRIVER, 0, 0); - pwmEnableChannelNotification(&PWM_DRIVER, 0); // MUST be before EnableChannel... - - /* - * Create the breathe thread. - */ - thread_t *breathe_thread_p; - breathe_thread_p = chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (!chThdShouldTerminateX()) { - chThdSleepMilliseconds(500); - } - - chThdTerminate(breathe_thread_p); - chThdSleepMilliseconds(2*BREATHE_STEP); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWM_DRIVER, 0); - pwmStop(&PWM_DRIVER); - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h deleted file mode 100644 index 189fcb6..0000000 --- a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - ChibiOS - (C) 2015-2016 flabbergast - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define KL2x_MCUCONF - -/* - * HAL driver system settings. - */ -#if 1 -/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 96000000UL -#define KINETIS_SYSCLK_FREQUENCY 48000000UL -#endif - -#if 0 -/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* need to redefine this, since the default is for K20x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -/* - * PWM driver settings. - */ -#define KINETIS_PWM_USE_TPM0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile deleted file mode 100644 index cf81f18..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile +++ /dev/null @@ -1,206 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPTIMIZE = 0 - -# Debugging format. -DEBUG = -#DEBUG = stabs - -# Memory/data model -MODEL = small - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu11 - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O$(OPTIMIZE) -g$(DEBUG) - USE_OPT += -funsigned-char -fshort-enums -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# Enable the selected hardware multiplier -ifeq ($(USE_HWMULT),) - USE_HWMULT = f5series -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = yes -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the idle thread stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_IDLE_STACKSIZE),) - USE_IDLE_STACKSIZE = 0xC00 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = nil - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = ../../../.. -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR5969/board.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk -include $(CHIBIOS)/os/hal/osal/nil/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/nil/nil.mk -include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/msp430fr5969.ld - -# C sources -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - msp_vectors.c \ - main.c - -# C++ sources -CPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = msp430fr5969 - -TRGT = msp430-elf- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# MSP430-specific options here -MOPT = -m$(MODEL) - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h deleted file mode 100644 index cb45526..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nilconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_NIL_CONF_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of user threads in the application. - * @note This number is not inclusive of the idle thread which is - * Implicitly handled. - */ -#define CH_CFG_NUM_THREADS 1 - -/** @} */ - -/*===========================================================================*/ -/** - * @name System timer settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @note This value together with the @p CH_CFG_ST_RESOLUTION - * option defines the maximum amount of time allowed for - * timeouts. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_MUTEXES FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief System assertions. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Stack check. - * - *@note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System initialization hook. - */ -#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_INIT_HOOK() { \ -} -#endif - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - */ -#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \ - /* Add custom threads initialization code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief System halt hook. - */ -#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in nilcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h deleted file mode 100644 index 81a620d..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the DMA subsystem. - */ -#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__) -#define HAL_USE_DMA TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS FALSE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c deleted file mode 100644 index 1929af1..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "hal_dma_lld.h" -#include "string.h" - -const char * start_msg = "\r\n\r\nExecuting DMA test suite...\r\n"; -const char * test_1_msg = - "TEST 1: Word-to-word memcpy with DMA engine, no callbacks\r\n"; -const char * test_2_msg = - "TEST 2: Byte-to-byte memcpy with DMA engine, no callbacks\r\n"; -const char * test_3_msg = - "TEST 3: Byte-to-byte memset with DMA engine, no callbacks\r\n"; -const char * test_4_msg = - "TEST 4: Word-to-word memcpy with DMA engine, with callback\r\n"; -const char * test_5_msg = - "TEST 5: Claim DMA channel 0, perform a Word-to-word memcpy\r\n"; -const char * test_6_msg = "TEST 6: Attempt to claim already claimed DMA " - "channel, fail. Release it, try to claim it again, " - "and succeed.\r\n"; -const char * test_7_msg = "TEST 7: Claim DMA channel 1, perform a Word-to-word " - "memcpy, and release it\r\n"; - -const char * succeed_string = "SUCCESS\r\n\r\n"; -const char * fail_string = "FAILURE\r\n\r\n"; - -char instring[256]; -char outstring[256]; -msp430x_dma_req_t * request; -uint8_t cb_arg = 1; - -void dma_callback_test(void * args) { - - *((uint8_t *)args) = 0; -} - -msp430x_dma_req_t test_1_req = { - instring, /* source address */ - outstring, /* destination address */ - 9, /* number of words */ - MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */ - MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD, /* word transfer */ - MSP430X_DMA_BLOCK, /* block (and blocking) transfer */ - DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */ - { - NULL, /* no callback */ - NULL /* no arguments */ - } -}; - -msp430x_dma_req_t test_2_req = { - instring, /* source address */ - outstring, /* destination address */ - 18, /* number of bytes */ - MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */ - MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE, /* byte transfer */ - MSP430X_DMA_BLOCK, /* block (and blocking) transfer */ - DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */ - { - NULL, /* no callback */ - NULL /* no arguments */ - } -}; - -msp430x_dma_req_t test_3_req = { - instring, /* source address */ - outstring, /* destination address */ - 16, /* number of words */ - MSP430X_DMA_DSTINCR, /* address mode - dest increment only */ - MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE, /* word transfer */ - MSP430X_DMA_BLOCK, /* block (and blocking) transfer */ - DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */ - { - NULL, /* no callback */ - NULL /* no arguments */ - } -}; - -msp430x_dma_req_t test_4_req = { - instring, /* source address */ - outstring, /* destination address */ - 9, /* number of words */ - MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */ - MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD, /* word transfer */ - MSP430X_DMA_BLOCK, /* block (and blocking) transfer */ - DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */ - { - &dma_callback_test, /* test callback */ - &cb_arg /* test arguments */ - } -}; - -msp430x_dma_req_t test_5_req = { - instring, /* source address */ - outstring, /* destination address */ - 9, /* number of words */ - MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */ - MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD, /* word transfer */ - MSP430X_DMA_BLOCK, /* block (and blocking) transfer */ - DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */ - { - NULL, /* no callback */ - NULL /* no arguments */ - } -}; - -msp430x_dma_ch_t ch = { NULL, 0, NULL }; - -/* - * Thread 2. - */ -THD_WORKING_AREA(waThread1, 2048); -THD_FUNCTION(Thread1, arg) { - - (void)arg; - - /* - * Activate the serial driver 0 using the driver default configuration. - */ - sdStart(&SD0, NULL); - - while (chnGetTimeout(&SD0, TIME_INFINITE)) { - chnWrite(&SD0, (const uint8_t *)start_msg, strlen(start_msg)); - chThdSleepMilliseconds(2000); - - /* Test 1 - use DMA engine to execute a word-wise memory-to-memory copy. */ - chnWrite(&SD0, (const uint8_t *)test_1_msg, strlen(test_1_msg)); - strcpy(instring, "After DMA test \r\n"); - strcpy(outstring, "Before DMA test \r\n"); - if (strcmp("Before DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - request = &test_1_req; - dmaRequest(request, TIME_INFINITE); - if (strcmp("After DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 2 - use DMA engine to execute a byte-wise memory-to-memory copy. */ - chnWrite(&SD0, (const uint8_t *)test_2_msg, strlen(test_2_msg)); - strcpy(instring, "After DMA test \r\n"); - strcpy(outstring, "Before DMA test \r\n"); - if (strcmp("Before DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - request = &test_2_req; - dmaRequest(request, TIME_INFINITE); - if (strcmp("After DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 3 - use DMA engine to execute a word-wise memory-to-memory set. */ - chnWrite(&SD0, (const uint8_t *)test_3_msg, strlen(test_3_msg)); - strcpy(instring, "After DMA test \r\n"); - strcpy(outstring, "Before DMA test \r\n"); - if (strcmp("Before DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - request = &test_3_req; - dmaRequest(request, TIME_INFINITE); - if (strcmp("AAAAAAAAAAAAAAAA\r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 4 - use DMA engine to execute a word-wise memory-to-memory copy, - * then call a callback. */ - chnWrite(&SD0, (const uint8_t *)test_4_msg, strlen(test_4_msg)); - strcpy(instring, "After DMA test \r\n"); - strcpy(outstring, "Before DMA test \r\n"); - cb_arg = 1; - if (strcmp("Before DMA test \r\n", outstring) || (cb_arg != 1)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - request = &test_4_req; - dmaRequest(request, TIME_INFINITE); - if (strcmp("After DMA test \r\n", outstring) || cb_arg) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 5 - use exclusive DMA channel 0 to execute a word-wise - * memory-to-memory copy. */ - chnWrite(&SD0, (const uint8_t *)test_5_msg, strlen(test_5_msg)); - strcpy(instring, "After DMA test \r\n"); - strcpy(outstring, "Before DMA test \r\n"); - if (strcmp("Before DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - request = &test_5_req; - dmaAcquire(&ch, 0); - dmaTransfer(&ch, request); - if (strcmp("After DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 6 - Attempt to claim DMA channel 0, fail, release it, attempt to - * claim it again */ - chnWrite(&SD0, (const uint8_t *)test_6_msg, strlen(test_6_msg)); - if (!dmaAcquire(&ch, 0)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - dmaRelease(&ch); - if (dmaAcquire(&ch, 0)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - dmaRelease(&ch); - - /* Test 7 - use exclusive DMA channel 1 to execute a word-wise - * memory-to-memory copy. */ - chnWrite(&SD0, (const uint8_t *)test_7_msg, strlen(test_7_msg)); - strcpy(instring, "After DMA test \r\n"); - strcpy(outstring, "Before DMA test \r\n"); - if (strcmp("Before DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - request = &test_5_req; - dmaAcquire(&ch, 1); - dmaTransfer(&ch, request); - if (strcmp("After DMA test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - dmaRelease(&ch); - } -} - -/* - * Threads static table, one entry per thread. The number of entries must - * match NIL_CFG_NUM_THREADS. - */ -THD_TABLE_BEGIN - THD_TABLE_ENTRY(waThread1, "dma_test", Thread1, NULL) -THD_TABLE_END - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - WDTCTL = WDTPW | WDTHOLD; - - halInit(); - chSysInit(); - dmaInit(); - - /* This is now the idle thread loop, you may perform here a low priority - task but you must never try to sleep or wait in this loop. Note that - this tasks runs at the lowest priority level so any instruction added - here will be executed after all other tasks have been started.*/ - while (true) { - } -} diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h deleted file mode 100644 index f47ee12..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * MSP430X drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - */ - -#define MSP430X_MCUCONF - -/* HAL driver system settings */ -#define MSP430X_ACLK_SRC MSP430X_VLOCLK -#define MSP430X_LFXTCLK_FREQ 0 -#define MSP430X_HFXTCLK_FREQ 0 -#define MSP430X_DCOCLK_FREQ 8000000 -#define MSP430X_MCLK_DIV 1 -#define MSP430X_SMCLK_DIV 32 - -/* - * SERIAL driver system settings. - */ -#define MSP430X_SERIAL_USE_USART0 TRUE -#define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_SERIAL_USE_USART1 FALSE -#define MSP430X_SERIAL_USE_USART2 FALSE -#define MSP430X_SERIAL_USE_USART3 FALSE - -/* - * ST driver system settings. - */ -#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_ST_TIMER_TYPE B -#define MSP430X_ST_TIMER_INDEX 0 - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c deleted file mode 100644 index 8968fb9..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c +++ /dev/null @@ -1,316 +0,0 @@ -#include - -__attribute__((interrupt(1))) -void Vector1(void) { - - while (1) { - } -} -__attribute__((interrupt(2))) -void Vector2(void) { - - while (1) { - } -} -__attribute__((interrupt(3))) -void Vector3(void) { - - while (1) { - } -} -__attribute__((interrupt(4))) -void Vector4(void) { - - while (1) { - } -} -__attribute__((interrupt(5))) -void Vector5(void) { - - while (1) { - } -} -__attribute__((interrupt(6))) -void Vector6(void) { - - while (1) { - } -} -__attribute__((interrupt(7))) -void Vector7(void) { - - while (1) { - } -} -__attribute__((interrupt(8))) -void Vector8(void) { - - while (1) { - } -} -__attribute__((interrupt(9))) -void Vector9(void) { - - while (1) { - } -} -__attribute__((interrupt(10))) -void Vector10(void) { - - while (1) { - } -} -__attribute__((interrupt(11))) -void Vector11(void) { - - while (1) { - } -} -__attribute__((interrupt(12))) -void Vector12(void) { - - while (1) { - } -} -__attribute__((interrupt(13))) -void Vector13(void) { - - while (1) { - } -} -__attribute__((interrupt(14))) -void Vector14(void) { - - while (1) { - } -} -__attribute__((interrupt(15))) -void Vector15(void) { - - while (1) { - } -} -__attribute__((interrupt(16))) -void Vector16(void) { - - while (1) { - } -} -__attribute__((interrupt(17))) -void Vector17(void) { - - while (1) { - } -} -__attribute__((interrupt(18))) -void Vector18(void) { - - while (1) { - } -} -__attribute__((interrupt(19))) -void Vector19(void) { - - while (1) { - } -} -__attribute__((interrupt(20))) -void Vector20(void) { - - while (1) { - } -} -__attribute__((interrupt(21))) -void Vector21(void) { - - while (1) { - } -} -__attribute__((interrupt(22))) -void Vector22(void) { - - while (1) { - } -} -__attribute__((interrupt(23))) -void Vector23(void) { - - while (1) { - } -} -__attribute__((interrupt(24))) -void Vector24(void) { - - while (1) { - } -} -__attribute__((interrupt(25))) -void Vector25(void) { - - while (1) { - } -} -__attribute__((interrupt(26))) -void Vector26(void) { - - while (1) { - } -} -__attribute__((interrupt(27))) -void Vector27(void) { - - while (1) { - } -} -__attribute__((interrupt(28))) -void Vector28(void) { - - while (1) { - } -} -__attribute__((interrupt(29))) -void Vector29(void) { - - while (1) { - } -} -__attribute__((interrupt(30))) -void Vector30(void) { - - while (1) { - } -} -__attribute__((interrupt(31))) -void Vector31(void) { - - while (1) { - } -} -__attribute__((interrupt(32))) -void Vector32(void) { - - while (1) { - } -} -__attribute__((interrupt(33))) -void Vector33(void) { - - while (1) { - } -} -__attribute__((interrupt(34))) -void Vector34(void) { - - while (1) { - } -} -__attribute__((interrupt(35))) -void Vector35(void) { - - while (1) { - } -} -__attribute__((interrupt(36))) -void Vector36(void) { - - while (1) { - } -} -__attribute__((interrupt(37))) -void Vector37(void) { - - while (1) { - } -} -__attribute__((interrupt(38))) -void Vector38(void) { - - while (1) { - } -} -__attribute__((interrupt(39))) -void Vector39(void) { - - while (1) { - } -} -__attribute__((interrupt(40))) -void Vector40(void) { - - while (1) { - } -} -__attribute__((interrupt(41))) -void Vector41(void) { - - while (1) { - } -} -__attribute__((interrupt(42))) -void Vector42(void) { - - while (1) { - } -} -__attribute__((interrupt(44))) -void Vector44(void) { - - while (1) { - } -} -__attribute__((interrupt(45))) -void Vector45(void) { - - while (1) { - } -} -__attribute__((interrupt(46))) -void Vector46(void) { - - while (1) { - } -} -__attribute__((interrupt(47))) -void Vector47(void) { - - while (1) { - } -} -__attribute__((interrupt(48))) -void Vector48(void) { - - while (1) { - } -} -__attribute__((interrupt(50))) -void Vector50(void) { - - while (1) { - } -} -__attribute__((interrupt(51))) -void Vector51(void) { - - while (1) { - } -} -__attribute__((interrupt(53))) -void Vector53(void) { - - while (1) { - } -} -__attribute__((interrupt(54))) -void Vector54(void) { - - while (1) { - } -} -__attribute__((interrupt(55))) -void Vector55(void) { - - while (1) { - } -} - - diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile deleted file mode 100644 index cf81f18..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile +++ /dev/null @@ -1,206 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPTIMIZE = 0 - -# Debugging format. -DEBUG = -#DEBUG = stabs - -# Memory/data model -MODEL = small - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu11 - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O$(OPTIMIZE) -g$(DEBUG) - USE_OPT += -funsigned-char -fshort-enums -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# Enable the selected hardware multiplier -ifeq ($(USE_HWMULT),) - USE_HWMULT = f5series -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = yes -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the idle thread stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_IDLE_STACKSIZE),) - USE_IDLE_STACKSIZE = 0xC00 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = nil - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = ../../../.. -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR5969/board.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk -include $(CHIBIOS)/os/hal/osal/nil/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/nil/nil.mk -include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/msp430fr5969.ld - -# C sources -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - msp_vectors.c \ - main.c - -# C++ sources -CPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = msp430fr5969 - -TRGT = msp430-elf- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# MSP430-specific options here -MOPT = -m$(MODEL) - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h deleted file mode 100644 index cb45526..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nilconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_NIL_CONF_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of user threads in the application. - * @note This number is not inclusive of the idle thread which is - * Implicitly handled. - */ -#define CH_CFG_NUM_THREADS 1 - -/** @} */ - -/*===========================================================================*/ -/** - * @name System timer settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @note This value together with the @p CH_CFG_ST_RESOLUTION - * option defines the maximum amount of time allowed for - * timeouts. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_MUTEXES FALSE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note Feature not currently implemented. - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief System assertions. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Stack check. - * - *@note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System initialization hook. - */ -#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_INIT_HOOK() { \ -} -#endif - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - */ -#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \ - /* Add custom threads initialization code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief System halt hook. - */ -#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in nilcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h deleted file mode 100644 index 083e124..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the DMA subsystem. - */ -#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__) -#define HAL_USE_DMA TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS FALSE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c deleted file mode 100644 index 17f5c86..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "hal_dma_lld.h" -#include "string.h" - -/* Disable watchdog because of lousy startup code in newlib */ -static void __attribute__((naked, section(".crt_0042disable_watchdog"), used)) -disable_watchdog(void) { - WDTCTL = WDTPW | WDTHOLD; -} - -const char * start_msg = "\r\n\r\nExecuting SPI test suite...\r\n"; -const char * test_1_msg = "TEST 1: spiStartIgnore, with callback\r\n"; -const char * test_2_msg = "TEST 2: spiStartExchange, with callback\r\n"; -const char * test_3_msg = "TEST 3: spiStartSend, with callback\r\n"; -const char * test_4_msg = "TEST 4: spiStartReceive, with callback\r\n"; -const char * test_5_msg = "TEST 5: spiIgnore\r\n"; -const char * test_6_msg = "TEST 6: spiExchange\r\n"; -const char * test_7_msg = "TEST 7: spiSend\r\n"; -const char * test_8_msg = "TEST 8: spiReceive\r\n"; -const char * test_9_msg = "TEST 9: spiStartExchange with exclusive DMA\r\n"; -const char * test_10_msg = - "TEST 10: spiStartExchange with exclusive DMA for TX\r\n"; -const char * test_11_msg = - "TEST 11: spiStartExchange with exclusive DMA for RX\r\n"; - -const char * succeed_string = "SUCCESS\r\n\r\n"; -const char * fail_string = "FAILURE\r\n\r\n"; - -char instring[256]; -char outstring[256]; -uint8_t cb_arg = 1; - -void spi_callback(SPIDriver * spip) { - (void)spip; - cb_arg = 0; -} - -SPIConfig SPIDA1_config = { - spi_callback, /* callback */ - PAL_NOLINE, /* hardware slave select line */ - 250000, /* data rate */ - MSP430X_SPI_BO_LSB, /* bit order */ - MSP430X_SPI_DS_EIGHT, /* data size */ - 0, /* SPI mode */ - 0xFFU, /* no exclusive TX DMA */ - 0xFFU /* no exclusive RX DMA */ -}; - -SPIConfig SPIDB0_config = { - NULL, /* callback */ - LINE_LED_G, /* GPIO slave select line */ - 1000, /* data rate */ - MSP430X_SPI_BO_MSB, /* bit order */ - MSP430X_SPI_DS_SEVEN, /* data size */ - 3, /* SPI mode */ - 0xFF, /* no exclusive TX DMA */ - 0xFF /* no exclusive RX DMA */ -}; - -/* - * Thread 2. - */ -THD_WORKING_AREA(waThread1, 4096); -THD_FUNCTION(Thread1, arg) { - - (void)arg; - - /* Set up loopback mode for testing */ - SPIDA1.regs->statw_a |= UCLISTEN; - SPIDB0.regs->statw_b |= UCLISTEN; - - /* - * Activate the serial driver 0 using the driver default configuration. - */ - sdStart(&SD0, NULL); - - /* Activate the SPI driver A1 using its config */ - spiStart(&SPIDA1, &SPIDA1_config); - /* Activate the SPI driver B0 using its config */ - spiStart(&SPIDB0, &SPIDB0_config); - - while (chnGetTimeout(&SD0, TIME_INFINITE)) { - chnWrite(&SD0, (const uint8_t *)start_msg, strlen(start_msg)); - chThdSleepMilliseconds(2000); - - /* Test 1 - spiStartIgnore with callback */ - chnWrite(&SD0, (const uint8_t *)test_1_msg, strlen(test_1_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - spiStartIgnore(&SPIDA1, strlen(outstring)); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 2 - spiStartExchange with callback */ - chnWrite(&SD0, (const uint8_t *)test_2_msg, strlen(test_2_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - spiStartExchange(&SPIDA1, strlen(instring), outstring, instring); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("After SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 3 - spiStartSend with callback */ - chnWrite(&SD0, (const uint8_t *)test_3_msg, strlen(test_3_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - spiStartSend(&SPIDA1, strlen(outstring), outstring); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 4 - spiStartReceive with callback */ - chnWrite(&SD0, (const uint8_t *)test_4_msg, strlen(test_4_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - chThdSleepMilliseconds(2000); - spiStartReceive(&SPIDA1, strlen(instring), instring); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("After SPI test \r\n", outstring) || - strcmp("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff" - "\xff\xff\xff", - instring) || - cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 5 - spiIgnore */ - chnWrite(&SD0, (const uint8_t *)test_5_msg, strlen(test_5_msg)); - strcpy(instring, "After SPI test \r\n"); - strcpy(outstring, "Before SPI test \r\n"); - if (strcmp("Before SPI test \r\n", outstring) || - strcmp("After SPI test \r\n", instring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDB0); - chThdSleepMilliseconds(2000); - spiIgnore(&SPIDB0, strlen(outstring)); - spiUnselect(&SPIDB0); - if (strcmp("After SPI test \r\n", instring) || - strcmp("Before SPI test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 6 - spiExchange */ - chnWrite(&SD0, (const uint8_t *)test_6_msg, strlen(test_6_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDB0); - spiExchange(&SPIDB0, strlen(outstring), outstring, instring); - spiUnselect(&SPIDB0); - if (strcmp("After SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 7 - spiSend */ - chnWrite(&SD0, (const uint8_t *)test_7_msg, strlen(test_7_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDB0); - spiSend(&SPIDB0, strlen(outstring), outstring); - spiUnselect(&SPIDB0); - if (strcmp("After SPI test \r\n", outstring) || - strcmp("Before SPI test \r\n", instring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Test 8 - spiReceive */ - chnWrite(&SD0, (const uint8_t *)test_8_msg, strlen(test_8_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDB0); - spiReceive(&SPIDB0, strlen(instring), instring); - spiUnselect(&SPIDB0); - if (strcmp("After SPI test \r\n", outstring) || - strcmp("\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f" - "\x7f\x7f\x7f", - instring)) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Reconfigure SPIDA1 to use exclusive DMA for both */ - spiStop(&SPIDA1); - SPIDA1_config.dmatx_index = 0; - SPIDA1_config.dmarx_index = 1; - SPIDA1_config.spi_mode = 1; /* because why not get coverage */ - spiStart(&SPIDA1, &SPIDA1_config); - - /* Test 9 - spiStartExchange with exclusive DMA */ - chnWrite(&SD0, (const uint8_t *)test_9_msg, strlen(test_9_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - spiStartExchange(&SPIDA1, strlen(outstring), outstring, instring); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("After SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Reconfigure SPIDA1 to use exclusive DMA for TX only */ - spiStop(&SPIDA1); - SPIDA1_config.dmatx_index = 0; - SPIDA1_config.dmarx_index = 0xFFU; - SPIDA1_config.spi_mode = 2; /* because why not get coverage */ - spiStart(&SPIDA1, &SPIDA1_config); - - /* Test 10 - spiStartExchange with exclusive DMA for TX */ - chnWrite(&SD0, (const uint8_t *)test_10_msg, strlen(test_10_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - spiStartExchange(&SPIDA1, strlen(outstring), outstring, instring); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("After SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - - /* Reconfigure SPIDA1 to use exclusive DMA for TX only */ - spiStop(&SPIDA1); - SPIDA1_config.dmatx_index = 0xFFU; - SPIDA1_config.dmarx_index = 1; - SPIDA1_config.spi_mode = 3; /* because why not get coverage */ - spiStart(&SPIDA1, &SPIDA1_config); - - /* Test 11 - spiStartExchange with exclusive DMA for RX */ - chnWrite(&SD0, (const uint8_t *)test_11_msg, strlen(test_11_msg)); - strcpy(outstring, "After SPI test \r\n"); - strcpy(instring, "Before SPI test \r\n"); - cb_arg = 1; - if (strcmp("Before SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 1) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - spiSelect(&SPIDA1); - spiStartExchange(&SPIDA1, strlen(outstring), outstring, instring); - while (SPIDA1.state != SPI_READY) - ; /* wait for transaction to finish */ - spiUnselect(&SPIDA1); - if (strcmp("After SPI test \r\n", instring) || - strcmp("After SPI test \r\n", outstring) || cb_arg != 0) { - chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string)); - } - else { - chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string)); - } - } -} - -/* - * Threads static table, one entry per thread. The number of entries must - * match NIL_CFG_NUM_THREADS. - */ -THD_TABLE_BEGIN - THD_TABLE_ENTRY(waThread1, "spi_test", Thread1, NULL) -THD_TABLE_END - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - WDTCTL = WDTPW | WDTHOLD; - - halInit(); - chSysInit(); - dmaInit(); - - /* This is now the idle thread loop, you may perform here a low priority - task but you must never try to sleep or wait in this loop. Note that - this tasks runs at the lowest priority level so any instruction added - here will be executed after all other tasks have been started.*/ - while (true) { - } -} diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h deleted file mode 100644 index 5cacf76..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * MSP430X drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - */ - -#define MSP430X_MCUCONF - -/* HAL driver system settings */ -#define MSP430X_ACLK_SRC MSP430X_VLOCLK -#define MSP430X_LFXTCLK_FREQ 0 -#define MSP430X_HFXTCLK_FREQ 0 -#define MSP430X_DCOCLK_FREQ 8000000 -#define MSP430X_MCLK_DIV 1 -#define MSP430X_SMCLK_DIV 32 - -/* - * SERIAL driver system settings. - */ -#define MSP430X_SERIAL_USE_USART0 TRUE -#define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_SERIAL_USE_USART1 FALSE -#define MSP430X_SERIAL_USE_USART2 FALSE -#define MSP430X_SERIAL_USE_USART3 FALSE - -/* - * ST driver system settings. - */ -#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC -#define MSP430X_ST_TIMER_TYPE B -#define MSP430X_ST_TIMER_INDEX 0 - -/* - * SPI driver system settings. - */ -#define MSP430X_SPI_USE_SPIA1 TRUE -#define MSP430X_SPI_USE_SPIB0 TRUE -#define MSP430X_SPI_EXCLUSIVE_DMA TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c deleted file mode 100644 index 8968fb9..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c +++ /dev/null @@ -1,316 +0,0 @@ -#include - -__attribute__((interrupt(1))) -void Vector1(void) { - - while (1) { - } -} -__attribute__((interrupt(2))) -void Vector2(void) { - - while (1) { - } -} -__attribute__((interrupt(3))) -void Vector3(void) { - - while (1) { - } -} -__attribute__((interrupt(4))) -void Vector4(void) { - - while (1) { - } -} -__attribute__((interrupt(5))) -void Vector5(void) { - - while (1) { - } -} -__attribute__((interrupt(6))) -void Vector6(void) { - - while (1) { - } -} -__attribute__((interrupt(7))) -void Vector7(void) { - - while (1) { - } -} -__attribute__((interrupt(8))) -void Vector8(void) { - - while (1) { - } -} -__attribute__((interrupt(9))) -void Vector9(void) { - - while (1) { - } -} -__attribute__((interrupt(10))) -void Vector10(void) { - - while (1) { - } -} -__attribute__((interrupt(11))) -void Vector11(void) { - - while (1) { - } -} -__attribute__((interrupt(12))) -void Vector12(void) { - - while (1) { - } -} -__attribute__((interrupt(13))) -void Vector13(void) { - - while (1) { - } -} -__attribute__((interrupt(14))) -void Vector14(void) { - - while (1) { - } -} -__attribute__((interrupt(15))) -void Vector15(void) { - - while (1) { - } -} -__attribute__((interrupt(16))) -void Vector16(void) { - - while (1) { - } -} -__attribute__((interrupt(17))) -void Vector17(void) { - - while (1) { - } -} -__attribute__((interrupt(18))) -void Vector18(void) { - - while (1) { - } -} -__attribute__((interrupt(19))) -void Vector19(void) { - - while (1) { - } -} -__attribute__((interrupt(20))) -void Vector20(void) { - - while (1) { - } -} -__attribute__((interrupt(21))) -void Vector21(void) { - - while (1) { - } -} -__attribute__((interrupt(22))) -void Vector22(void) { - - while (1) { - } -} -__attribute__((interrupt(23))) -void Vector23(void) { - - while (1) { - } -} -__attribute__((interrupt(24))) -void Vector24(void) { - - while (1) { - } -} -__attribute__((interrupt(25))) -void Vector25(void) { - - while (1) { - } -} -__attribute__((interrupt(26))) -void Vector26(void) { - - while (1) { - } -} -__attribute__((interrupt(27))) -void Vector27(void) { - - while (1) { - } -} -__attribute__((interrupt(28))) -void Vector28(void) { - - while (1) { - } -} -__attribute__((interrupt(29))) -void Vector29(void) { - - while (1) { - } -} -__attribute__((interrupt(30))) -void Vector30(void) { - - while (1) { - } -} -__attribute__((interrupt(31))) -void Vector31(void) { - - while (1) { - } -} -__attribute__((interrupt(32))) -void Vector32(void) { - - while (1) { - } -} -__attribute__((interrupt(33))) -void Vector33(void) { - - while (1) { - } -} -__attribute__((interrupt(34))) -void Vector34(void) { - - while (1) { - } -} -__attribute__((interrupt(35))) -void Vector35(void) { - - while (1) { - } -} -__attribute__((interrupt(36))) -void Vector36(void) { - - while (1) { - } -} -__attribute__((interrupt(37))) -void Vector37(void) { - - while (1) { - } -} -__attribute__((interrupt(38))) -void Vector38(void) { - - while (1) { - } -} -__attribute__((interrupt(39))) -void Vector39(void) { - - while (1) { - } -} -__attribute__((interrupt(40))) -void Vector40(void) { - - while (1) { - } -} -__attribute__((interrupt(41))) -void Vector41(void) { - - while (1) { - } -} -__attribute__((interrupt(42))) -void Vector42(void) { - - while (1) { - } -} -__attribute__((interrupt(44))) -void Vector44(void) { - - while (1) { - } -} -__attribute__((interrupt(45))) -void Vector45(void) { - - while (1) { - } -} -__attribute__((interrupt(46))) -void Vector46(void) { - - while (1) { - } -} -__attribute__((interrupt(47))) -void Vector47(void) { - - while (1) { - } -} -__attribute__((interrupt(48))) -void Vector48(void) { - - while (1) { - } -} -__attribute__((interrupt(50))) -void Vector50(void) { - - while (1) { - } -} -__attribute__((interrupt(51))) -void Vector51(void) { - - while (1) { - } -} -__attribute__((interrupt(53))) -void Vector53(void) { - - while (1) { - } -} -__attribute__((interrupt(54))) -void Vector54(void) { - - while (1) { - } -} -__attribute__((interrupt(55))) -void Vector55(void) { - - while (1) { - } -} - - diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/Makefile deleted file mode 100644 index 69d6e90..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/Makefile +++ /dev/null @@ -1,211 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/chconf.h deleted file mode 100644 index 71b3bb4..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/halconf.h deleted file mode 100644 index dc055de..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/halconf.h +++ /dev/null @@ -1,341 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/main.c deleted file mode 100644 index 6371a61..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/main.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 1 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: AIN3 (prescaled by 1/3). - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - (1U << (3)), /* AIN3 */ - (ADC_CONFIG_RES_8bit << ADC_CONFIG_RES_Pos) | - (ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling << ADC_CONFIG_INPSEL_Pos) | - (ADC_CONFIG_REFSEL_VBG << ADC_CONFIG_REFSEL_Pos) | - (ADC_CONFIG_EXTREFSEL_None << ADC_CONFIG_EXTREFSEL_Pos) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 1 channel, SW triggered. - * Channels: VDD (prescaled by 1/3). - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - 0, /* Use 0 for VDD */ - (ADC_CONFIG_RES_10bit << ADC_CONFIG_RES_Pos) | - (ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling << ADC_CONFIG_INPSEL_Pos) | - (ADC_CONFIG_REFSEL_VBG << ADC_CONFIG_REFSEL_Pos) | - (ADC_CONFIG_EXTREFSEL_None << ADC_CONFIG_EXTREFSEL_Pos) -}; - -/* - * LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - palTogglePad(IOPORT1, LED0); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog input used by the demo (P0.02, SMBA). - */ - palSetPadMode(IOPORT1, 2, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - if (palReadPad(IOPORT1, KEY1) == 0) - adcStopConversion(&ADCD1); - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/mcuconf.h deleted file mode 100644 index 123261a..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/mcuconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * NRF51 driver system settings. - */ -#define NRF51_ADC_USE_ADC1 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/readme.txt b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/readme.txt deleted file mode 100644 index 59c1972..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/ADC/readme.txt +++ /dev/null @@ -1,21 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - ADC driver demo for NRF51x22. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Waveshare BLE400 board. - -** The Demo ** - -The application demonstrates the use of the NRF51x22 ADC driver. - -** Board Setup ** - -Connect P0.02 (SMBA) to an analog voltage between 0 - VDD. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/Makefile deleted file mode 100644 index 564444d..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/Makefile +++ /dev/null @@ -1,211 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/chconf.h deleted file mode 100644 index 50218e4..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/halconf.h deleted file mode 100644 index 407dd2f..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/halconf.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c deleted file mode 100644 index 8d24d02..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#ifndef DEBOUNCE_TIME -#define DEBOUNCE_TIME 100 -#endif - -static virtual_timer_t vt1; -static virtual_timer_t vt2; -static bool debouncing1; -static bool debouncing2; - -/* LED1 toggled after debounce.*/ -static void led1toggle(void *arg) { - - (void)arg; - palTogglePad(IOPORT1, LED1); - debouncing1 = false; -} - -/* LED2 toggled after debounce.*/ -static void led2toggle(void *arg) { - - (void)arg; - palTogglePad(IOPORT1, LED2); - debouncing2 = false; -} - -static void extcb1(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - uint8_t pad1 = palReadPad(IOPORT1, KEY1); - - if (!debouncing1 && (pad1 == PAL_LOW)) { - debouncing1 = true; - chSysLockFromISR(); - chVTSetI(&vt1, MS2ST(DEBOUNCE_TIME), led1toggle, NULL); - chSysUnlockFromISR(); - } else if (debouncing1 && (pad1 == PAL_HIGH)) { - chSysLockFromISR(); - if (chVTIsArmedI(&vt1)) - chVTResetI(&vt1); - chSysUnlockFromISR(); - debouncing1 = false; - } -} - -static void extcb2(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - uint8_t pad2 = palReadPad(IOPORT1, KEY2); - - if (!debouncing2 && (pad2 == PAL_LOW)) { - debouncing2 = true; - chSysLockFromISR(); - chVTSetI(&vt2, MS2ST(DEBOUNCE_TIME), led2toggle, NULL); - chSysUnlockFromISR(); - } else if (debouncing2 && (pad2 == PAL_HIGH)) { - chSysLockFromISR(); - if (chVTIsArmedI(&vt2)) - chVTResetI(&vt2); - chSysUnlockFromISR(); - debouncing2 = false; - } -} - -static const EXTConfig extcfg = -{ - { - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | (KEY1 << EXT_MODE_GPIO_OFFSET), extcb1}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART | (KEY2 << EXT_MODE_GPIO_OFFSET), extcb2}, - } -}; - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - palSetPad(IOPORT1, LED0); - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - extChannelDisable(&EXTD1, 1); - palClearPad(IOPORT1, LED0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - extChannelEnable(&EXTD1, 1); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/mcuconf.h deleted file mode 100644 index f3a0d85..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/mcuconf.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * NRF51 driver settings. - */ - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/Makefile deleted file mode 100644 index 69d6e90..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/Makefile +++ /dev/null @@ -1,211 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/chconf.h deleted file mode 100644 index 71b3bb4..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/halconf.h deleted file mode 100644 index 6ea7ca6..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/halconf.h +++ /dev/null @@ -1,341 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/main.c deleted file mode 100644 index 3531644..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/main.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * GPT callback for GPTD2. - */ -static void gptcallback1(GPTDriver *gptp) { - - (void)gptp; - palTogglePad(IOPORT1, LED1); - - /* - * Start a one-shot timer (@ 250ms) - */ - chSysLockFromISR(); - gptStartOneShotI(&GPTD3, 15625); - chSysUnlockFromISR(); -} - -/* - * GPT callback for GPTD3. - */ -static void gptcallback2(GPTDriver *gptp) { - - (void)gptp; - palTogglePad(IOPORT1, LED2); -} - -/* - * GPT configuration - * Frequency: 31250Hz (32us period) - * Resolution: 16 bits - */ -static const GPTConfig gptcfg1 = { - 31250, - gptcallback1, - 16, -}; - -/* - * GPT configuration - * Frequency: 62500Hz (16us period) - * Resolution: 16 bits - */ -static const GPTConfig gptcfg2 = { - 62500, - gptcallback2, - 16, -}; - -/* - * LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - palTogglePad(IOPORT1, LED0); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Sets up the GPT timers - */ - gptStart(&GPTD2, &gptcfg1); - gptStart(&GPTD3, &gptcfg2); - - /* - * Start a continuous timer - */ - gptStartContinuous(&GPTD2, 15625); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - if (palReadPad(IOPORT1, KEY1) == 0) { - gptStopTimer(&GPTD2); - gptStop(&GPTD2); - gptStopTimer(&GPTD3); - gptStop(&GPTD3); - } - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/mcuconf.h deleted file mode 100644 index 7fd549f..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/mcuconf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * NRF51 driver system settings. - */ -#define NRF51_GPT_USE_TIMER1 TRUE -#define NRF51_GPT_USE_TIMER2 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/readme.txt b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/readme.txt deleted file mode 100644 index da5f977..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/GPT/readme.txt +++ /dev/null @@ -1,19 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - GPT driver demo for NRF51x22. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Waveshare BLE400 board. - -** The Demo ** - -The application demonstrates the use of the NRF51x22 GPT driver. - -** Board Setup ** - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/Makefile deleted file mode 100644 index 29a66d7..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/Makefile +++ /dev/null @@ -1,211 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/chconf.h deleted file mode 100644 index 3d441c6..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES FALSE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES FALSE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES FALSE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE FALSE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP FALSE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/halconf.h deleted file mode 100644 index 1c3036a..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/halconf.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/main.c deleted file mode 100644 index cd038b5..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/main.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - This demo: - 1) Writes bytes to the EEPROM - 2) Reads the same bytes back - 3) Inverts the byte values - 4) Writes them - 5) Reads them back - */ - -#include - -#include "ch.h" -#include "hal.h" - -#define I2C_ADDR 0x50 -#define I2C_FAKE_ADDR 0x4C -#define EEPROM_START_ADDR 0x00 - -/* - * EEPROM thread. - */ -static THD_WORKING_AREA(PollEepromThreadWA, 1024); -static THD_FUNCTION(PollEepromThread, arg) { - - unsigned i; - uint8_t tx_data[5]; - uint8_t rx_data[4]; - msg_t status; - - (void)arg; - - chRegSetThreadName("PollEeprom"); - - /* set initial data to write */ - tx_data[0] = EEPROM_START_ADDR; - tx_data[1] = 0xA0; - tx_data[2] = 0xA1; - tx_data[3] = 0xA2; - tx_data[4] = 0xA3; - - while (true) { - - /* write out initial data */ - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, I2C_ADDR, tx_data, sizeof(tx_data), NULL, 0, TIME_INFINITE); - i2cReleaseBus(&I2CD1); - osalDbgCheck(MSG_OK == status); - - /* read back inital data */ - osalThreadSleepMilliseconds(2); - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, I2C_ADDR, tx_data, 1, rx_data, sizeof(rx_data), TIME_INFINITE); - i2cReleaseBus(&I2CD1); - osalDbgCheck(MSG_OK == status); - - /* invert the data */ - for (i = 1; i < sizeof(tx_data); i++) - tx_data[i] ^= 0xff; - - /* write out inverted data */ - osalThreadSleepMilliseconds(2); - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, I2C_ADDR, tx_data, sizeof(tx_data), NULL, 0, TIME_INFINITE); - i2cReleaseBus(&I2CD1); - osalDbgCheck(MSG_OK == status); - - /* read back inverted data */ - osalThreadSleepMilliseconds(2); - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, I2C_ADDR, tx_data, 1, rx_data, sizeof(rx_data), TIME_INFINITE); - i2cReleaseBus(&I2CD1); - osalDbgCheck(MSG_OK == status); - - osalThreadSleepMilliseconds(TIME_INFINITE); - } -} - -/* - * Fake polling thread. - */ -static THD_WORKING_AREA(PollFakeThreadWA, 256); -static THD_FUNCTION(PollFakeThread, arg) { - - (void)arg; - - chRegSetThreadName("PollFake"); - while (true) { - - msg_t status; - uint8_t rx_data[2]; - i2cflags_t errors; - - i2cAcquireBus(&I2CD1); - status = i2cMasterReceiveTimeout(&I2CD1, I2C_FAKE_ADDR, rx_data, 2, MS2ST(4)); - i2cReleaseBus(&I2CD1); - - if (status == MSG_RESET){ - errors = i2cGetErrors(&I2CD1); - osalDbgCheck(I2C_ACK_FAILURE == errors); - } - - palTogglePad(IOPORT1, LED1); /* on */ - osalThreadSleepMilliseconds(1000); - } -} - -/* - * I2C1 config. - */ -static const I2CConfig i2cfg = { - 400000, - I2C_SCL, - I2C_SDA, -}; - -/* - * Entry point, note, the main() function is already a thread in the system - * on entry. - */ -int main(void) { - - halInit(); - chSysInit(); - - i2cStart(&I2CD1, &i2cfg); - - /* Create EEPROM thread. */ - chThdCreateStatic(PollEepromThreadWA, - sizeof(PollEepromThreadWA), - NORMALPRIO, - PollEepromThread, - NULL); - - /* Create not responding thread. */ - chThdCreateStatic(PollFakeThreadWA, - sizeof(PollFakeThreadWA), - NORMALPRIO, - PollFakeThread, - NULL); - - /* main loop handles LED */ - while (true) { - palTogglePad(IOPORT1, LED0); /* on */ - osalThreadSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/mcuconf.h deleted file mode 100644 index e1747ec..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/mcuconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * HAL driver system settings. - */ -#define NRF51_I2C_USE_I2C0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/readme.txt b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/readme.txt deleted file mode 100644 index ae26420..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/I2C/readme.txt +++ /dev/null @@ -1,21 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - I2C driver demo for NRF51x22. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Waveshare BLE400 board. - -** The Demo ** - -The application demonstrates the use of the NRF51x22 I2C driver. - -** Board Setup ** - -- Connect AT24CXX EEPROM board to I2C port on BLE400 board - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/Makefile deleted file mode 100644 index 6119c51..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/Makefile +++ /dev/null @@ -1,232 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -CHIBIOS = /home/sdalu/ChibiOS/ChibiOS -CHIBIOS_CONTRIB = /home/sdalu/ChibiOS/ChibiOS-Contrib - -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - - -include $(CHIBIOS_CONTRIB)/os/various/jlink.mk - - -JLINK_DEVICE = nrf51422 -JLINK_PRE_FLASH = w4 4001e504 1 -JLINK_ERASE_ALL = w4 4001e504 2\nw4 4001e50c 1\nsleep 100 - -flash: all jlink-flash - diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/chconf.h deleted file mode 100644 index a753ec9..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/halconf.h deleted file mode 100644 index 58e6a6b..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/halconf.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/main.c deleted file mode 100644 index 51179d8..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/main.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - Copyright (C) 2016 Stéphane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwm_cb_period(PWMDriver *pwmp) { - (void)pwmp; - - palTogglePad(IOPORT1, LED0); - palClearPad(IOPORT1, LED1); - -} - -static void pwm_cb_channel0(PWMDriver *pwmp) { - (void)pwmp; - palSetPad(IOPORT1, LED1); -} - - -/* - * Application entry point. - */ -int main(void) { - PWMConfig pwmcfg = { - .frequency = PWM_FREQUENCY_31250HZ, - .period = 31250, - .callback = pwm_cb_period, - { { .mode = PWM_OUTPUT_DISABLED, - .callback = pwm_cb_channel0, }, - { .mode = PWM_OUTPUT_ACTIVE_HIGH, - .callback = NULL, - .ioline = LINE_LED2, - .gpiote_channel = 0, - .ppi_channel = { 0, 1 } }, - { .mode = PWM_OUTPUT_DISABLED, - .callback = NULL, }, - }, - }; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * - */ - pwmStart(&PWMD1, &pwmcfg); - pwmEnablePeriodicNotification(&PWMD1); - pwmEnableChannel(&PWMD1, 0, PWM_FRACTION_TO_WIDTH(&PWMD1, 2, 1)); - pwmEnableChannelNotification(&PWMD1, 0); - pwmEnableChannel(&PWMD1, 1, PWM_FRACTION_TO_WIDTH(&PWMD1, 4, 3)); - - while (1) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/mcuconf.h deleted file mode 100644 index 374340b..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/PWM/mcuconf.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * HAL driver system settings. - */ -#define NRF51_SERIAL_USE_UART0 TRUE -#define NRF51_ST_USE_RTC0 TRUE -#define NRF51_ST_USE_RTC1 FALSE -#define NRF51_ST_USE_TIMER0 FALSE -#define NRF51_PWM_USE_TIMER0 TRUE -#define NRF51_PWM_USE_GPIOTE_PPI TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/Makefile deleted file mode 100644 index a42eae4..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/Makefile +++ /dev/null @@ -1,230 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -#CHIBIOS = ../../../../../ChibiOS-RT -#CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -CHIBIOS = /home/sdalu/ChibiOS/ChibiOS_16.1.2 -CHIBIOS_CONTRIB = /home/sdalu/ChibiOS/Z/ChibiOS-Contrib - -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/NRF51-DK/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk - - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ - $(CHIBIOS)/os/hal/lib/streams/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - - -# Flash -JLINK_DEVICE = nrf51422 -JLINK_PRE_FLASH = w4 4001e504 1 -JLINK_ERASE_ALL = w4 4001e504 2\nw4 4001e50c 1\nsleep 100 - - -include /home/sdalu/ChibiOS/W/ChibiOS-Contrib/os/various/jlink.mk -include /home/sdalu/ChibiOS/W/ChibiOS-Contrib/os/various/gdb.mk - -flash: all jlink-flash -debug: gdb-debug diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/chconf.h deleted file mode 100644 index 20d7b4b..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf.h deleted file mode 100644 index 7132e9c..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -#include "halconf_community.h" - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf_community.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf_community.h deleted file mode 100644 index a85b95f..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/halconf_community.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - Copyright (C) 2016 Stéphane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the community subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the community subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM FALSE - -/*===========================================================================*/ -/* CRC driver settings. */ -/*===========================================================================*/ - -/** - * @brief Enables DMA engine when performing CRC transactions. - * @note Enabling this option also enables asynchronous API. - */ -#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__) -#define CRC_USE_DMA FALSE -#endif - -/** - * @brief Enables the @p crcAcquireUnit() and @p crcReleaseUnit() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define CRC_USE_MUTUAL_EXCLUSION FALSE -#endif - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/main.c deleted file mode 100644 index b9572b8..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/main.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "shell.h" -#include "chprintf.h" -#include - - -/* - * Command Random - */ -#define RANDOM_BUFFER_SIZE 1024 -static uint8_t random_buffer[RANDOM_BUFFER_SIZE]; - -static void cmd_random(BaseSequentialStream *chp, int argc, char *argv[]) { - uint16_t size = 16; - uint16_t i = 0; - uint8_t nl = 0; - - if (argc > 0) { - size = atoi(argv[0]); - } - - if (size > RANDOM_BUFFER_SIZE) { - chprintf(chp, "random: maximum size is %d.\r\n", RANDOM_BUFFER_SIZE); - return; - } - - chprintf(chp, "Fetching %d random byte(s):\r\n", size); - - rngStart(&RNGD1, NULL); - rngWrite(&RNGD1, random_buffer, size, TIME_INFINITE); - rngStop(&RNGD1); - - for (i = 0 ; i < size ; i++) { - chprintf(chp, "%02x ", random_buffer[i]); - if (nl = (((i+1) % 20) == 0)) - chprintf(chp, "\r\n"); - } - if (!nl) - chprintf(chp, "\r\n"); - -} - - -/* - * Shell - */ -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -static const ShellCommand commands[] = { - {"random", cmd_random}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD1, - commands -}; - - - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - - /* - * Serial device - */ - SerialConfig serial_config = { - .speed = 115200, - .tx_pad = UART_TX, - .rx_pad = UART_RX, - }; - sdStart(&SD1, &serial_config); - - - /* - * Shell manager initialization. - */ - shellInit(); - shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - palTogglePad(IOPORT1, LED1); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/mcuconf.h deleted file mode 100644 index 7977f4b..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/mcuconf.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define NRF51_RNG_USE_RNG1 TRUE -#define NRF51_SERIAL_USE_UART0 TRUE - - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/readme.txt b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/readme.txt deleted file mode 100644 index 02f4cc7..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/RNG/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - GPT driver demo for NRF51x22. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an NRF51-DK board. - -** The Demo ** - -The application demonstrates the use of the NRF51x22 RNG driver. - -** Board Setup ** - -** Build Procedure ** - -Just modify the TRGT line in the makefile in order to use different GCC ports. diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/Makefile deleted file mode 100644 index 92070b1..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/Makefile +++ /dev/null @@ -1,211 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary -SREC = $(CP) -O srec - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/chconf.h deleted file mode 100644 index f777f9d..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/halconf.h deleted file mode 100644 index 4269718..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/halconf.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/main.c deleted file mode 100644 index 8d9c089..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/main.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * 1Mbps speed SPI configuration (1MHz, CPHA=0, CPOL=0, LSb first). - */ - -static const SPIConfig hs_spicfg = { - .end_cb=NULL, - .freq=NRF51_SPI_FREQ_1MBPS, - .sckpad=SPI_SCK, - .mosipad=SPI_MOSI, - .misopad=SPI_MISO, - .sspad=SPI_SS, - .lsbfirst=TRUE, - .mode=0 -}; - -static const SPIConfig ls_spicfg = { - .end_cb=NULL, - .freq=NRF51_SPI_FREQ_250KBPS, - .sckpad=SPI_SCK, - .mosipad=SPI_MOSI, - .misopad=SPI_MISO, - .sspad=SPI_SS, - .lsbfirst=TRUE, - .mode=0 -}; - - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static THD_FUNCTION(spi_thread_1, p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (true) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(SPI_PORT_SPI0, LED0); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static THD_FUNCTION(spi_thread_2, p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (true) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(SPI_PORT_SPI0, LED0); /* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } -} -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static THD_WORKING_AREA(blinker_wa, 128); -static THD_FUNCTION(blinker, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - palSetPad(SPI_PORT_SPI0, LED1); - chThdSleepMilliseconds(500); - palClearPad(SPI_PORT_SPI0, LED1); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/mcuconf.h deleted file mode 100644 index 64d0639..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/mcuconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * HAL driver system settings. - */ -#define NRF51_SPI_USE_SPI0 TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/readme.txt b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/readme.txt deleted file mode 100644 index 7ea1194..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/SPI/readme.txt +++ /dev/null @@ -1,21 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - SPI driver demo for NRF51x22. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Waveshare BLE400 board. - -** The Demo ** - -The application demonstrates the use of the NRF51x22 SPI driver. - -** Board Setup ** - -- Connect MOSI (P0.24) and MISO (P0.23) together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/Makefile b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/Makefile deleted file mode 100644 index c316b35..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_nrf51.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/NRF51-DK/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/NRF51822.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - -# Flash -JLINK_DEVICE = nrf51422 -JLINK_PRE_FLASH = w4 4001e504 1 -JLINK_ERASE_ALL = w4 4001e504 2\nw4 4001e50c 1\nsleep 100 - -include $(CHIBIOS_CONTRIB)/os/various/jlink.mk -include $(CHIBIOS_CONTRIB)/os/various/gdb.mk - -flash: all jlink-flash -debug: gdb-debug diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/chconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/chconf.h deleted file mode 100644 index 4477bd5..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/halconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/halconf.h deleted file mode 100644 index a1c53f2..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/halconf.h +++ /dev/null @@ -1,341 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/main.c deleted file mode 100644 index cdbf89b..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/main.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -void timeout_callback(void) { - palTogglePad(IOPORT1, LED2); - palTogglePad(IOPORT1, LED3); - palTogglePad(IOPORT1, LED4); -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPad(IOPORT1, LED1); - - WDGConfig WDG_config = { - .flags.pause_on_sleep = 0, - .flags.pause_on_halt = 0, - .timeout_ms = 5000, - .callback = timeout_callback - }; - - wdgStart(&WDGD1, &WDG_config); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - if (palReadPad(IOPORT1, BTN1) == 0) { - palTogglePad(IOPORT1, LED1); - wdgReset(&WDGD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/mcuconf.h b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/mcuconf.h deleted file mode 100644 index b891a13..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/mcuconf.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define WDG_USE_TIMEOUT_CALLBACK TRUE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/readme.txt b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/readme.txt deleted file mode 100644 index 41312c9..0000000 --- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/WDG/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - GPT driver demo for NRF51x22. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an NRF51-DK board. - -** The Demo ** - -The application demonstrates the use of the NRF51x22 GPT driver. - -** Board Setup ** - -** Build Procedure ** - -Just modify the TRGT line in the makefile in order to use different GCC ports. diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject deleted file mode 100644 index 83bd4ce..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject +++ /dev/null @@ -1,49 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project deleted file mode 100644 index deaa743..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project +++ /dev/null @@ -1,27 +0,0 @@ - - - STM32F0xx-crc - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile deleted file mode 100644 index 24f660a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile +++ /dev/null @@ -1,214 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c \ - $(CHIBIOS_CONTRIB)/os/various/crcsw.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h deleted file mode 100644 index c2d6f04..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h deleted file mode 100644 index 6e2d3c7..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h deleted file mode 100644 index 2bc41bf..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC TRUE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -/*===========================================================================*/ -/* CRC driver settings. */ -/*===========================================================================*/ - -/** - * @brief Enables DMA engine when performing CRC transactions. - * @note Enabling this option also enables asynchronous API. - */ -#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__) -#define CRC_USE_DMA FALSE -#endif - -/** - * @brief Enables the @p crcAcquireUnit() and @p crcReleaseUnit() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define CRC_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c deleted file mode 100644 index 6da0808..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - - -/* - * Data used for CRC calculation. - */ -uint8_t data[] = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f -}; - -uint32_t gCrc = 0; - - -/* - * CRC Callback used with DMA testing - */ -void crc_callback(CRCDriver *crcp, uint32_t crc) { - (void)crcp; - gCrc = crc; -} - - -/* - * CRC32 configuration - */ -static const CRCConfig crc32_config = { - .poly_size = 32, - .poly = 0x04C11DB7, - .initial_val = 0xFFFFFFFF, - .final_val = 0xFFFFFFFF, - .reflect_data = 1, - .reflect_remainder = 1 -}; - -/* - * CRC16 configuration - */ -static const CRCConfig crc16_config = { - .poly_size = 16, - .poly = 0x8005, - .initial_val = 0x0, - .final_val = 0x0, - .reflect_data = 1, - .reflect_remainder = 1 -}; - -/* - * CRC OpenPGP - */ -static const CRCConfig crc8_config = { - .poly_size = 8, - .poly = 0x07, - .initial_val = 0x0, - .final_val = 0x0, - .reflect_data = 0, - .reflect_remainder = 0 -}; - - -#if CRC_USE_DMA == TRUE -/* - * CRC32 configuration with DMA - */ -static const CRCConfig crc32_dma_config = { - .poly_size = 32, - .poly = 0x04C11DB7, - .initial_val = 0xFFFFFFFF, - .final_val = 0xFFFFFFFF, - .reflect_data = 1, - .reflect_remainder = 1, - .end_cb = crc_callback -}; - -/* - * CRC16 configuration with DMA - */ -static const CRCConfig crc16_dma_config = { - .poly_size = 16, - .poly = 0x8005, - .initial_val = 0x0, - .final_val = 0x0, - .reflect_data = 1, - .reflect_remainder = 1, - .end_cb = crc_callback -}; -#endif - - -static void testCrc(const CRCConfig *config, uint32_t result) { - uint32_t crc; - - crcAcquireUnit(&CRCD1); /* Acquire ownership of the bus. */ - crcStart(&CRCD1, config); /* Activate CRC driver */ - crcReset(&CRCD1); - crc = crcCalc(&CRCD1, sizeof(data), &data); - osalDbgAssert(crc == result, "CRC does not match expected result"); - crcStop(&CRCD1); /* Deactive CRC driver); */ - crcReleaseUnit(&CRCD1); /* Acquire ownership of the bus. */ -} - - -#if CRC_USE_DMA -static void testCrcDma(const CRCConfig *config, uint32_t result) { - gCrc = 0; - - crcAcquireUnit(&CRCD1); /* Acquire ownership of the bus. */ - crcStart(&CRCD1, config); /* Activate CRC driver */ - crcReset(&CRCD1); - crcStartCalc(&CRCD1, sizeof(data), &data); - while (gCrc == 0); /* Wait for callback to verify */ - crcStop(&CRCD1); /* Deactive CRC driver); */ - crcReleaseUnit(&CRCD1); /* Acquire ownership of the bus. */ - - osalDbgAssert(gCrc == result, "CRC does not match expected result"); -} -#endif - -/* - * CRC thread - */ -static THD_WORKING_AREA(crc_thread_1_wa, 256); -static THD_FUNCTION(crc_thread_1, p) { - (void)p; - chRegSetThreadName("CRC thread 1"); - while (true) { - -/* Test ST hardware CRC */ -/* if CRC_USE_DMA == TRUE these sync function internally use DMA and put the - * calling thread to sleep */ -#if STM32_CRC_USE_CRC1 == TRUE - /* CRC32 Calculation */ - testCrc(&crc32_config, 0x91267e8a); - /* CRC16 Calculation */ - testCrc(&crc16_config, 0xc36a); - /* CRC8 Calculation */ - testCrc(&crc8_config, 0x06); - -/* Test ST CRC with DMA */ -#if CRC_USE_DMA == TRUE - /* CRC32 Calculation */ - testCrcDma(&crc32_dma_config, 0x91267e8a); - /* CRC16 Calculation */ - testCrcDma(&crc16_dma_config, 0xc36a); -#endif - -#endif /* STM32_CRC_USE_CRC1 */ - - -/* Test software CRC */ -#if CRCSW_USE_CRC1 == TRUE -/* Test CRCSW with compute CRC */ -#if CRCSW_PROGRAMMABLE == TRUE - /* CRC32 Calculation */ - testCrc(&crc32_config, 0x91267e8a); - /* CRC16 Calculation */ - testCrc(&crc16_config, 0xc36a); - testCrc(&crc8_config, 0x06); -#endif -/* Test CRCSW with table lookups. */ -#if CRCSW_CRC32_TABLE == TRUE - /* CRC32 Calculation with table lookup */ - testCrc(CRCSW_CRC32_TABLE_CONFIG, 0x91267e8a); -#endif -#if CRCSW_CRC16_TABLE == TRUE - /* CRC16 Calculation with table lookup */ - testCrc(CRCSW_CRC16_TABLE_CONFIG, 0xc36a); -#endif - -#endif /* CRCSW_USE_CRC1 */ - } -} - - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - palClearPad(GPIOC, GPIOC_LED_RED); - chThdSleepMilliseconds(500); - palSetPad(GPIOC, GPIOC_LED_RED); - chThdSleepMilliseconds(500); - } -} - - -/* - * Application entry point. - */ -int main(void) { - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Starting the CRC thread - */ - chThdCreateStatic(crc_thread_1_wa, sizeof(crc_thread_1_wa), - NORMALPRIO + 1, crc_thread_1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h deleted file mode 100644 index ad184cd..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - ChibiOS - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h deleted file mode 100644 index 8df78ec..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_COMMUNITY_H_ -#define _MCUCONF_COMMUNITY_H_ - -/* - * CRC driver system settings. - */ -#define STM32_CRC_USE_CRC1 TRUE -#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 -#define STM32_CRC_CRC1_DMA_PRIORITY 2 -#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 - -#define CRCSW_USE_CRC1 FALSE -#define CRCSW_CRC32_TABLE TRUE -#define CRCSW_CRC16_TABLE TRUE -#define CRCSW_PROGRAMMABLE TRUE - -#endif diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt deleted file mode 100644 index b10413a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt +++ /dev/null @@ -1,36 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - CRC driver demo for STM32F0xx (also sw driver) ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx CRC driver. There are -many different ways to configure and setup the CRC. This demo has be -configured to test the following: - * ST hardware block configured with CRC32 with or without DMA - * ST hardware block configured with CRC16 with or without DMA - * Software CRC32 - * Software CRC16 - -** Board Setup ** - -- No requirements - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.cproject deleted file mode 100644 index bb91bf2..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.cproject +++ /dev/null @@ -1,71 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.project deleted file mode 100644 index 6599a83..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-1-Wire - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/Makefile deleted file mode 100644 index d121cee..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x200 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F030x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c \ - onewire_test.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes -Wundef - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/chconf.h deleted file mode 100644 index 724dc02..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf.h deleted file mode 100644 index c3b1671..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h deleted file mode 100644 index 91dbfbc..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE TRUE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/main.c deleted file mode 100644 index 793bffe..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/main.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "onewire_test.h" - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Executes infinite onewire test code. - */ - onewireTest(); - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h deleted file mode 100644 index 89b0fd1..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 3 -#define STM32_ST_USE_TIMER 3 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h deleted file mode 100644 index 29d7a7a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c deleted file mode 100644 index be20dbc..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "hal.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -#if defined(BOARD_ST_STM32F4_DISCOVERY) || \ - defined(BOARD_ST_STM32F0_DISCOVERY) || \ - defined(BOARD_ST_STM32F0308_DISCOVERY) - #if ONEWIRE_USE_STRONG_PULLUP - #error "This board has not enough voltage for this feature" - #endif -#endif - -#if defined(BOARD_ST_STM32F0308_DISCOVERY) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_PIN0 - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_off() (palClearPad(GPIOC, GPIOC_LED4)) - #define search_led_on() (palSetPad(GPIOC, GPIOC_LED4)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#elif defined(BOARD_ST_STM32F4_DISCOVERY) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_PIN0 - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(2) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_off() (palClearPad(GPIOD, GPIOD_LED4)) - #define search_led_on() (palSetPad(GPIOD, GPIOD_LED4)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#elif defined(BOARD_OLIMEX_STM32_103STK) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN 0 - #define ONEWIRE_PAD_MODE_IDLE PAL_MODE_INPUT - #define ONEWIRE_PAD_MODE_ACTIVE PAL_MODE_STM32_ALTERNATE_OPENDRAIN - #define search_led_on() (palClearPad(GPIOC, GPIOC_LED)) - #define search_led_off() (palSetPad(GPIOC, GPIOC_LED)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#else - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_TACHOMETER - #include "pads.h" - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(2) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_on red_led_on - #define search_led_off red_led_off - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#endif - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ -/* - * Forward declarations - */ -#if ONEWIRE_USE_STRONG_PULLUP -static void strong_pullup_assert(void); -static void strong_pullup_release(void); -#endif - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static uint8_t testbuf[12]; - -/* stores 3 temperature values in millicelsius */ -static int32_t temperature[3]; - -/* - * Config for underlied PWM driver. - * Note! It is NOT constant because 1-wire driver needs to change them - * during functioning. - */ -static PWMConfig pwm_cfg = { - 0, - 0, - NULL, - { - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -#if STM32_PWM_USE_ADVANCED - 0, -#endif - 0 -}; - -/* - * - */ -static const onewireConfig ow_cfg = { - &PWMD3, - &pwm_cfg, - PWM_OUTPUT_ACTIVE_LOW, - ONEWIRE_MASTER_CHANNEL, - ONEWIRE_SAMPLE_CHANNEL, - ONEWIRE_PORT, - ONEWIRE_PIN, -#if defined(STM32F1XX) - ONEWIRE_PAD_MODE_IDLE, -#endif - ONEWIRE_PAD_MODE_ACTIVE, -#if ONEWIRE_USE_STRONG_PULLUP - strong_pullup_assert, - strong_pullup_release -#endif -}; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -#if ONEWIRE_USE_STRONG_PULLUP -/** - * - */ -static void strong_pullup_assert(void) { - palSetPadMode(ONEWIRE_PORT, ONEWIRE_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL); -} - -/** - * - */ -static void strong_pullup_release(void) { - palSetPadMode(ONEWIRE_PORT, ONEWIRE_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); -} -#endif /* ONEWIRE_USE_STRONG_PULLUP */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void onewireTest(void) { - - int16_t tmp; - uint8_t rombuf[24]; - size_t devices_on_bus = 0; - size_t i = 0; - bool presence; - - onewireObjectInit(&OWD1); - onewireStart(&OWD1, &ow_cfg); - -#if ONEWIRE_SYNTH_SEARCH_TEST - synthSearchRomTest(&OWD1); -#endif - - for (i=0; i<3; i++) - temperature[i] = -666; - - while (true) { - if (true == onewireReset(&OWD1)){ - - memset(rombuf, 0x55, sizeof(rombuf)); - search_led_on(); - devices_on_bus = onewireSearchRom(&OWD1, rombuf, 3); - search_led_off(); - osalDbgCheck(devices_on_bus <= 3); - osalDbgCheck(devices_on_bus > 0); - - if (1 == devices_on_bus){ - /* test read rom command */ - presence = onewireReset(&OWD1); - osalDbgCheck(true == presence); - testbuf[0] = ONEWIRE_CMD_READ_ROM; - onewireWrite(&OWD1, testbuf, 1, 0); - onewireRead(&OWD1, testbuf, 8); - osalDbgCheck(testbuf[7] == onewireCRC(testbuf, 7)); - osalDbgCheck(0 == memcmp(rombuf, testbuf, 8)); - } - - /* start temperature measurement on all connected devices at once */ - presence = onewireReset(&OWD1); - osalDbgCheck(true == presence); - testbuf[0] = ONEWIRE_CMD_SKIP_ROM; - testbuf[1] = ONEWIRE_CMD_CONVERT_TEMP; - -#if ONEWIRE_USE_STRONG_PULLUP - onewireWrite(&OWD1, testbuf, 2, MS2ST(750)); -#else - onewireWrite(&OWD1, testbuf, 2, 0); - /* poll bus waiting ready signal from all connected devices */ - testbuf[0] = 0; - while (testbuf[0] == 0){ - osalThreadSleepMilliseconds(50); - onewireRead(&OWD1, testbuf, 1); - } -#endif - - for (i=0; i - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -/* do not set it more than 64 because of some fill_pattern functions - * will be broken.*/ -#define SYNTH_DEVICES_MAX 64 - -/* - * synthetic device - */ -typedef struct { - bool active; - uint64_t id; -} OWSynthDevice; - -/* - * synthetic bus - */ -typedef struct { - OWSynthDevice devices[SYNTH_DEVICES_MAX]; - size_t dev_present; - bool complement_bit; - ioline_t rom_bit; -} OWSynthBus; - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static OWSynthBus synth_bus; - -/* - * local buffer for discovered ROMs - */ -static uint64_t detected_devices[SYNTH_DEVICES_MAX]; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void _synth_ow_write_bit(onewireDriver *owp, ioline_t bit) { - (void)owp; - size_t i; - - for (i=0; i> synth_bus.rom_bit) & 1U) != bit) { - synth_bus.devices[i].active = false; - } - } - synth_bus.rom_bit++; -} - -/** - * - */ -ioline_t _synth_ow_read_bit(void) { - ioline_t ret = 0xFF; - size_t i; - ioline_t bit; - - for (i=0; i> synth_bus.rom_bit) & 1U; - if (synth_bus.complement_bit){ - bit ^= 1U; - } - if (0xFF == ret) - ret = bit; - else - ret &= bit; - } - } - synth_bus.complement_bit = !synth_bus.complement_bit; - return ret; -} - -/** - * - */ -static void synth_reset_pulse(void){ - size_t i; - - for (i=0; isearch_rom); - - do { - /* initialize buffer to store result */ - if (owp->search_rom.reg.devices_found >= max_rom_cnt) - owp->search_rom.retbuf = result + 8*(max_rom_cnt-1); - else - owp->search_rom.retbuf = result + 8*owp->search_rom.reg.devices_found; - memset(owp->search_rom.retbuf, 0, 8); - - /* clean iteration state */ - search_clean_iteration(&owp->search_rom); - - /**/ - synth_reset_pulse(); - synth_bus.rom_bit = 0; - synth_bus.complement_bit = false; - for (i=0; i<64*3 - 1; i++){ - ow_search_rom_cb(NULL, owp); - } - - if (ONEWIRE_SEARCH_ROM_ERROR != owp->search_rom.reg.result) { - /* store cached result for usage in next iteration */ - memcpy(owp->search_rom.prev_path, owp->search_rom.retbuf, 8); - } - } - while (ONEWIRE_SEARCH_ROM_SUCCESS == owp->search_rom.reg.result); - - /**/ - if (ONEWIRE_SEARCH_ROM_ERROR == owp->search_rom.reg.result) - return 0; - else - return owp->search_rom.reg.devices_found; -} - -/** - * - */ -static void fill_pattern_real_devices(void) { - size_t i; - - for (i=0; i> i); - } -} - -/** - * @brief random pattern helper - */ -static bool is_id_uniq(const OWSynthDevice *dev, size_t n, uint64_t id) { - size_t i; - - for (i=0; i - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/.project deleted file mode 100644 index f721498..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/.project +++ /dev/null @@ -1,91 +0,0 @@ - - - STM32F1xx-qei - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/Makefile deleted file mode 100644 index 6dbcf91..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/Makefile +++ /dev/null @@ -1,218 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F072xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/chconf.h deleted file mode 100644 index 71cbe47..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf.h deleted file mode 100644 index 93cc713..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf_community.h deleted file mode 100644 index 9c28ead..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/halconf_community.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef HALCONF_COMMUNITY_H -#define HALCONF_COMMUNITY_H - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the QEI subsystem. - */ -#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) -#define HAL_USE_QEI TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM FALSE - -#endif /* HALCONF_COMMUNITY_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/main.c deleted file mode 100644 index 275cefa..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/main.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Nicolas Reinecke - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - static QEIConfig qeicfg = { - QEI_MODE_QUADRATURE, - QEI_BOTH_EDGES, - QEI_DIRINV_FALSE, - }; - - qeiStart(&QEID3, &qeicfg); - qeiEnable(&QEID3); - - uint16_t qei; - while (1) { - qei = qeiGetCount(&QEID3); - if (qei & 1) - palSetPad(GPIOC, GPIOC_LED_GREEN); - else - palClearPad(GPIOC, GPIOC_LED_GREEN); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf.h deleted file mode 100644 index 6fb24b0..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG TRUE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf_community.h deleted file mode 100644 index b89bc7a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/mcuconf_community.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2016 - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_COMMUNITY_H -#define MCUCONF_COMMUNITY_H - -/* - * QEI driver system settings. - */ -#define STM32_QEI_USE_TIM1 FALSE -#define STM32_QEI_USE_TIM2 FALSE -#define STM32_QEI_USE_TIM3 TRUE -#define STM32_QEI_TIM1_IRQ_PRIORITY 3 -#define STM32_QEI_TIM2_IRQ_PRIORITY 3 -#define STM32_QEI_TIM3_IRQ_PRIORITY 3 - -#endif /* MCUCONF_COMMUNITY_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/readme.txt deleted file mode 100644 index 32cff3e..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/qei/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - qei driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx QEI encoder driver. - -** Board Setup ** - -To use demo you have to connect an encoder to one of the timers that support -the encoder mode to ch1 and ch2 and add an external pullup resistor to 3V3. -For good results add 100n capacitors to GND. - - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.cproject deleted file mode 100644 index 11b29ed..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.cproject +++ /dev/null @@ -1,55 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.project deleted file mode 100644 index 9c1fc51..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/.project +++ /dev/null @@ -1,91 +0,0 @@ - - - STM32F1xx-onewire - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/Makefile deleted file mode 100644 index d2e25b1..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/Makefile +++ /dev/null @@ -1,215 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_103STK/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c \ - onewire_test.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes -Wundef - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/chconf.h deleted file mode 100644 index ee20e3c..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf.h deleted file mode 100644 index e6ce929..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h deleted file mode 100644 index 91dbfbc..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE TRUE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/main.c deleted file mode 100644 index 793bffe..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/main.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "onewire_test.h" - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Executes infinite onewire test code. - */ - onewireTest(); - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h deleted file mode 100644 index 807293a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h deleted file mode 100644 index 7c438a8..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c deleted file mode 100644 index be20dbc..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "hal.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -#if defined(BOARD_ST_STM32F4_DISCOVERY) || \ - defined(BOARD_ST_STM32F0_DISCOVERY) || \ - defined(BOARD_ST_STM32F0308_DISCOVERY) - #if ONEWIRE_USE_STRONG_PULLUP - #error "This board has not enough voltage for this feature" - #endif -#endif - -#if defined(BOARD_ST_STM32F0308_DISCOVERY) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_PIN0 - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_off() (palClearPad(GPIOC, GPIOC_LED4)) - #define search_led_on() (palSetPad(GPIOC, GPIOC_LED4)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#elif defined(BOARD_ST_STM32F4_DISCOVERY) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_PIN0 - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(2) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_off() (palClearPad(GPIOD, GPIOD_LED4)) - #define search_led_on() (palSetPad(GPIOD, GPIOD_LED4)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#elif defined(BOARD_OLIMEX_STM32_103STK) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN 0 - #define ONEWIRE_PAD_MODE_IDLE PAL_MODE_INPUT - #define ONEWIRE_PAD_MODE_ACTIVE PAL_MODE_STM32_ALTERNATE_OPENDRAIN - #define search_led_on() (palClearPad(GPIOC, GPIOC_LED)) - #define search_led_off() (palSetPad(GPIOC, GPIOC_LED)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#else - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_TACHOMETER - #include "pads.h" - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(2) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_on red_led_on - #define search_led_off red_led_off - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#endif - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ -/* - * Forward declarations - */ -#if ONEWIRE_USE_STRONG_PULLUP -static void strong_pullup_assert(void); -static void strong_pullup_release(void); -#endif - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static uint8_t testbuf[12]; - -/* stores 3 temperature values in millicelsius */ -static int32_t temperature[3]; - -/* - * Config for underlied PWM driver. - * Note! It is NOT constant because 1-wire driver needs to change them - * during functioning. - */ -static PWMConfig pwm_cfg = { - 0, - 0, - NULL, - { - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -#if STM32_PWM_USE_ADVANCED - 0, -#endif - 0 -}; - -/* - * - */ -static const onewireConfig ow_cfg = { - &PWMD3, - &pwm_cfg, - PWM_OUTPUT_ACTIVE_LOW, - ONEWIRE_MASTER_CHANNEL, - ONEWIRE_SAMPLE_CHANNEL, - ONEWIRE_PORT, - ONEWIRE_PIN, -#if defined(STM32F1XX) - ONEWIRE_PAD_MODE_IDLE, -#endif - ONEWIRE_PAD_MODE_ACTIVE, -#if ONEWIRE_USE_STRONG_PULLUP - strong_pullup_assert, - strong_pullup_release -#endif -}; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -#if ONEWIRE_USE_STRONG_PULLUP -/** - * - */ -static void strong_pullup_assert(void) { - palSetPadMode(ONEWIRE_PORT, ONEWIRE_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL); -} - -/** - * - */ -static void strong_pullup_release(void) { - palSetPadMode(ONEWIRE_PORT, ONEWIRE_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); -} -#endif /* ONEWIRE_USE_STRONG_PULLUP */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void onewireTest(void) { - - int16_t tmp; - uint8_t rombuf[24]; - size_t devices_on_bus = 0; - size_t i = 0; - bool presence; - - onewireObjectInit(&OWD1); - onewireStart(&OWD1, &ow_cfg); - -#if ONEWIRE_SYNTH_SEARCH_TEST - synthSearchRomTest(&OWD1); -#endif - - for (i=0; i<3; i++) - temperature[i] = -666; - - while (true) { - if (true == onewireReset(&OWD1)){ - - memset(rombuf, 0x55, sizeof(rombuf)); - search_led_on(); - devices_on_bus = onewireSearchRom(&OWD1, rombuf, 3); - search_led_off(); - osalDbgCheck(devices_on_bus <= 3); - osalDbgCheck(devices_on_bus > 0); - - if (1 == devices_on_bus){ - /* test read rom command */ - presence = onewireReset(&OWD1); - osalDbgCheck(true == presence); - testbuf[0] = ONEWIRE_CMD_READ_ROM; - onewireWrite(&OWD1, testbuf, 1, 0); - onewireRead(&OWD1, testbuf, 8); - osalDbgCheck(testbuf[7] == onewireCRC(testbuf, 7)); - osalDbgCheck(0 == memcmp(rombuf, testbuf, 8)); - } - - /* start temperature measurement on all connected devices at once */ - presence = onewireReset(&OWD1); - osalDbgCheck(true == presence); - testbuf[0] = ONEWIRE_CMD_SKIP_ROM; - testbuf[1] = ONEWIRE_CMD_CONVERT_TEMP; - -#if ONEWIRE_USE_STRONG_PULLUP - onewireWrite(&OWD1, testbuf, 2, MS2ST(750)); -#else - onewireWrite(&OWD1, testbuf, 2, 0); - /* poll bus waiting ready signal from all connected devices */ - testbuf[0] = 0; - while (testbuf[0] == 0){ - osalThreadSleepMilliseconds(50); - onewireRead(&OWD1, testbuf, 1); - } -#endif - - for (i=0; i - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -/* do not set it more than 64 because of some fill_pattern functions - * will be broken.*/ -#define SYNTH_DEVICES_MAX 64 - -/* - * synthetic device - */ -typedef struct { - bool active; - uint64_t id; -} OWSynthDevice; - -/* - * synthetic bus - */ -typedef struct { - OWSynthDevice devices[SYNTH_DEVICES_MAX]; - size_t dev_present; - bool complement_bit; - ioline_t rom_bit; -} OWSynthBus; - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static OWSynthBus synth_bus; - -/* - * local buffer for discovered ROMs - */ -static uint64_t detected_devices[SYNTH_DEVICES_MAX]; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void _synth_ow_write_bit(onewireDriver *owp, ioline_t bit) { - (void)owp; - size_t i; - - for (i=0; i> synth_bus.rom_bit) & 1U) != bit) { - synth_bus.devices[i].active = false; - } - } - synth_bus.rom_bit++; -} - -/** - * - */ -ioline_t _synth_ow_read_bit(void) { - ioline_t ret = 0xFF; - size_t i; - ioline_t bit; - - for (i=0; i> synth_bus.rom_bit) & 1U; - if (synth_bus.complement_bit){ - bit ^= 1U; - } - if (0xFF == ret) - ret = bit; - else - ret &= bit; - } - } - synth_bus.complement_bit = !synth_bus.complement_bit; - return ret; -} - -/** - * - */ -static void synth_reset_pulse(void){ - size_t i; - - for (i=0; isearch_rom); - - do { - /* initialize buffer to store result */ - if (owp->search_rom.reg.devices_found >= max_rom_cnt) - owp->search_rom.retbuf = result + 8*(max_rom_cnt-1); - else - owp->search_rom.retbuf = result + 8*owp->search_rom.reg.devices_found; - memset(owp->search_rom.retbuf, 0, 8); - - /* clean iteration state */ - search_clean_iteration(&owp->search_rom); - - /**/ - synth_reset_pulse(); - synth_bus.rom_bit = 0; - synth_bus.complement_bit = false; - for (i=0; i<64*3 - 1; i++){ - ow_search_rom_cb(NULL, owp); - } - - if (ONEWIRE_SEARCH_ROM_ERROR != owp->search_rom.reg.result) { - /* store cached result for usage in next iteration */ - memcpy(owp->search_rom.prev_path, owp->search_rom.retbuf, 8); - } - } - while (ONEWIRE_SEARCH_ROM_SUCCESS == owp->search_rom.reg.result); - - /**/ - if (ONEWIRE_SEARCH_ROM_ERROR == owp->search_rom.reg.result) - return 0; - else - return owp->search_rom.reg.devices_found; -} - -/** - * - */ -static void fill_pattern_real_devices(void) { - size_t i; - - for (i=0; i> i); - } -} - -/** - * @brief random pattern helper - */ -static bool is_id_uniq(const OWSynthDevice *dev, size_t n, uint64_t id) { - size_t i; - - for (i=0; i - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/.project deleted file mode 100644 index f721498..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/.project +++ /dev/null @@ -1,91 +0,0 @@ - - - STM32F1xx-qei - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/Makefile deleted file mode 100644 index a232838..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/Makefile +++ /dev/null @@ -1,218 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_103STK/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/chconf.h deleted file mode 100644 index 71cbe47..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf.h deleted file mode 100644 index 93cc713..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf_community.h deleted file mode 100644 index 9c28ead..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/halconf_community.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef HALCONF_COMMUNITY_H -#define HALCONF_COMMUNITY_H - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the QEI subsystem. - */ -#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__) -#define HAL_USE_QEI TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM FALSE - -#endif /* HALCONF_COMMUNITY_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/main.c deleted file mode 100644 index 332f197..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/main.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Nicolas Reinecke - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - static QEIConfig qeicfg = { - QEI_MODE_QUADRATURE, - QEI_BOTH_EDGES, - QEI_DIRINV_FALSE, - }; - - AFIO->MAPR |= AFIO_MAPR_TIM3_REMAP_FULLREMAP; - qeiStart(&QEID3, &qeicfg); - qeiEnable(&QEID3); - - uint16_t qei; - while (1) { - qei = qeiGetCount(&QEID3); - if (qei & 1) - palSetPad(GPIOC, GPIOC_LED); - else - palClearPad(GPIOC, GPIOC_LED); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf.h deleted file mode 100644 index f3ccaf0..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F103_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG TRUE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf_community.h deleted file mode 100644 index 2c1a688..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/mcuconf_community.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2016 - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_COMMUNITY_H -#define MCUCONF_COMMUNITY_H - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE - -/* - * QEI driver system settings. - */ -#define STM32_QEI_USE_TIM1 FALSE -#define STM32_QEI_USE_TIM2 FALSE -#define STM32_QEI_USE_TIM3 TRUE -#define STM32_QEI_USE_TIM4 FALSE -#define STM32_QEI_USE_TIM5 FALSE -#define STM32_QEI_USE_TIM8 FALSE -#define STM32_QEI_TIM1_IRQ_PRIORITY 7 -#define STM32_QEI_TIM2_IRQ_PRIORITY 7 -#define STM32_QEI_TIM3_IRQ_PRIORITY 7 -#define STM32_QEI_TIM4_IRQ_PRIORITY 7 -#define STM32_QEI_TIM5_IRQ_PRIORITY 7 -#define STM32_QEI_TIM8_IRQ_PRIORITY 7 - -#endif /* MCUCONF_COMMUNITY_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/readme.txt deleted file mode 100644 index 04f8f46..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/qei/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - qei driver demo for STM32F1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32_103STK board. - -** The Demo ** - -The application demonstrates the use of the STM32F1xx QEI encoder driver. - -** Board Setup ** - -To use demo you have to connect an encoder to one of the timers that support -the encoder mode to ch1 and ch2 and add an external pullup resistor to 3V3. -For good results add 100n capacitors to GND. - - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.cproject deleted file mode 100644 index 79f8348..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.cproject +++ /dev/null @@ -1,49 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.project deleted file mode 100644 index ee156de..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/.project +++ /dev/null @@ -1,27 +0,0 @@ - - - STM32F3xx-EEProm - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/Makefile deleted file mode 100644 index 90ada53..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F3xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/chconf.h deleted file mode 100644 index 00eb395..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf.h deleted file mode 100644 index 42c228e..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf_community.h deleted file mode 100644 index 3916efb..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/halconf_community.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the EEPROM subsystem. - */ -#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) -#define HAL_USE_EEPROM TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - - /*===========================================================================*/ -/* EEProm driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables 24xx series I2C eeprom device driver. - * @note Disabling this option saves both code and data space. - */ -#define EEPROM_USE_EE24XX TRUE - /** - * @brief Enables 25xx series SPI eeprom device driver. - * @note Disabling this option saves both code and data space. - */ -#define EEPROM_USE_EE25XX TRUE - - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c deleted file mode 100644 index 130a600..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define EEPROM_SIZE 8192 // 64Kb, 8KB -#define EEPROM_PAGE_SIZE 32 -#define EEPROM_WRITE_TIME_MS 10 // byte/page write time -#define EEPROM_SPID SPID1 -#define EEPROM_SPIDCONFIG spi1cfg - -static const SPIConfig EEPROM_SPIDCONFIG = { - NULL, - GPIOA, - 12, - 0, // Up to 20Mhz - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -static SPIEepromFileConfig eeCfg = { - 0, - EEPROM_SIZE, - EEPROM_SIZE, - EEPROM_PAGE_SIZE, - MS2ST(EEPROM_WRITE_TIME_MS), - &EEPROM_SPID, - &EEPROM_SPIDCONFIG, -}; - -static SPIEepromFileStream eeFile; -static EepromFileStream *eeFS; - -static uint8_t buffer[64]; - -THD_WORKING_AREA(waThreadEE, 256); -static THD_FUNCTION(ThreadEE, arg) -{ - (void)arg; - uint8_t len = 64; - - while (TRUE) - { - - eeFS = SPIEepromFileOpen(&eeFile, &eeCfg, EepromFindDevice(EEPROM_DEV_25XX)); - fileStreamSeek(eeFS, 0); - - fileStreamWrite(eeFS, buffer, len); - fileStreamRead(eeFS, buffer, len); - - fileStreamClose(eeFS); - - chThdSleepMilliseconds(500); - } - - return; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - spiStart(&EEPROM_SPID, &EEPROM_SPIDCONFIG); - - chThdCreateStatic(waThreadEE, sizeof(waThreadEE), NORMALPRIO, ThreadEE, NULL); - - /* - * Normal main() thread activity, it resets the watchdog. - */ - while (true) { - palToggleLine(LINE_LED4_BLUE); - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf.h deleted file mode 100644 index 60b9854..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG TRUE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h deleted file mode 100644 index 7ca6e71..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.cproject deleted file mode 100644 index 258d708..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.cproject +++ /dev/null @@ -1,49 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.project deleted file mode 100644 index 312bc05..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/.project +++ /dev/null @@ -1,27 +0,0 @@ - - - STM32F3xx-TIMCAP - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/Makefile deleted file mode 100644 index 90ada53..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F3xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/chconf.h deleted file mode 100644 index 00eb395..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf.h deleted file mode 100644 index 9af6aca..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h deleted file mode 100644 index 998080e..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the EEPROM subsystem. - */ -#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) -#define HAL_USE_EEPROM FALSE -#endif - -/** - * @brief Enables the TIMCAP subsystem. - */ -#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) -#define HAL_USE_TIMCAP TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - - /*===========================================================================*/ -/* EEProm driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables 24xx series I2C eeprom device driver. - * @note Disabling this option saves both code and data space. - */ -#define EEPROM_USE_EE24XX TRUE - /** - * @brief Enables 25xx series SPI eeprom device driver. - * @note Disabling this option saves both code and data space. - */ -#define EEPROM_USE_EE25XX TRUE - - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/main.c deleted file mode 100644 index dd91924..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/main.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - - -static uint8_t TIM3CC1CaptureNumber, TIM3CC2CaptureNumber; -static uint16_t TIM3CC1ReadValue1, TIM3CC1ReadValue2; -static uint16_t TIM3CC2ReadValue1, TIM3CC2ReadValue2; -static bool TIM3CC1UD, TIM3CC2UD; - -static uint16_t freq1, freq2; - - -void reEnableInputCapture(TIMCAPDriver *timcapp) -{ - - if ((timcapp->tim->DIER & TIM_DIER_CC1IE) == 0) - { - TIM3CC1CaptureNumber = 0; - TIM3CC1UD = false; - timcapp->tim->DIER |= TIM_DIER_CC1IE; - } - - if ((timcapp->tim->DIER & TIM_DIER_CC2IE) == 0) - { - TIM3CC2CaptureNumber = 0; - TIM3CC2UD = false; - timcapp->tim->DIER |= TIM_DIER_CC2IE; - } - -} - -void captureOverflowCb(TIMCAPDriver *timcapp) -{ - if (TIM3CC1UD && (timcapp->tim->DIER & TIM_DIER_CC1IE)) - { - timcapp->tim->DIER &= ~TIM_DIER_CC1IE; - freq1 = 0; - } - - if (TIM3CC2UD && (timcapp->tim->DIER & TIM_DIER_CC2IE)) - { - timcapp->tim->DIER &= ~TIM_DIER_CC2IE; - freq2 = 0; - } - - TIM3CC1UD = true; - TIM3CC2UD = true; -} - -void capture1Cb(TIMCAPDriver *timcapp) -{ - if(TIM3CC1CaptureNumber == 0) - { - /* Get the Input Capture value */ - TIM3CC1ReadValue1 = timcapp->tim->CCR[0]; - TIM3CC1CaptureNumber = 1; - TIM3CC1UD = false; - } - else if(TIM3CC1CaptureNumber == 1) - { - uint32_t Capture; - /* Get the Input Capture value */ - TIM3CC1ReadValue2 = timcapp->tim->CCR[0]; - TIM3CC1UD = false; - - /* Capture computation */ - if (TIM3CC1ReadValue2 > TIM3CC1ReadValue1) - { - Capture = ((uint32_t)TIM3CC1ReadValue2 - (uint32_t)TIM3CC1ReadValue1); - } - else - { - Capture = (((uint32_t)TIM3CC1ReadValue2 + 0x10000) - (uint32_t)TIM3CC1ReadValue1); - } - - /* Frequency computation */ - freq1 = (timcapp->config->frequency / Capture); - - TIM3CC1ReadValue1 = TIM3CC1ReadValue2; - TIM3CC1CaptureNumber = 0; - - /* Disable CC1 interrupt */ - timcapp->tim->DIER &= ~TIM_DIER_CC1IE; - } -} - -void capture2Cb(TIMCAPDriver *timcapp) -{ - if(TIM3CC2CaptureNumber == 0) - { - /* Get the Input Capture value */ - TIM3CC2ReadValue1 = timcapp->tim->CCR[1]; - TIM3CC2CaptureNumber = 1; - TIM3CC2UD = false; - } - else if(TIM3CC2CaptureNumber == 1) - { - uint32_t Capture; - /* Get the Input Capture value */ - TIM3CC2ReadValue2 = timcapp->tim->CCR[1]; - TIM3CC2UD = false; - - /* Capture computation */ - if (TIM3CC2ReadValue2 > TIM3CC2ReadValue1) - { - Capture = ((uint32_t)TIM3CC2ReadValue2 - (uint32_t)TIM3CC2ReadValue1); - } - else - { - Capture = (((uint32_t)TIM3CC2ReadValue2 + 0x10000) - (uint32_t)TIM3CC2ReadValue1); - } - - /* Frequency computation */ - freq2 = (timcapp->config->frequency / Capture); - - TIM3CC2ReadValue1 = TIM3CC2ReadValue2; - TIM3CC2CaptureNumber = 0; - - /* Disable CC2 interrupt */ - timcapp->tim->DIER &= ~TIM_DIER_CC2IE; - } -} - -TIMCAPConfig tc_conf = { - {TIMCAP_INPUT_ACTIVE_HIGH, - TIMCAP_INPUT_ACTIVE_HIGH, - TIMCAP_INPUT_DISABLED, - TIMCAP_INPUT_DISABLED}, - 200000, /* TIM3 Runs at 36Mhz max. (1/200000)*65536 = 0.32s Max, 3.12Hz Min */ - {capture1Cb, capture2Cb, NULL, NULL}, - captureOverflowCb, - 0, - 0 -}; - -THD_WORKING_AREA(waThreadTimcap, 256); -static THD_FUNCTION(ThreadTimcap, arg) -{ - (void)arg; - - while (TRUE) - { - - reEnableInputCapture(&TIMCAPD3); - chThdSleepMilliseconds(200); - } - - return; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - timcapStart(&TIMCAPD3, &tc_conf); - - chThdCreateStatic(waThreadTimcap, sizeof(waThreadTimcap), NORMALPRIO, ThreadTimcap, NULL); - - /* - * Normal main() thread activity, it resets the watchdog. - */ - while (true) { - palToggleLine(LINE_LED4_BLUE); - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h deleted file mode 100644 index 60b9854..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG TRUE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h deleted file mode 100644 index b115590..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE - -/* - * TIMCAP driver system settings. - */ -#define STM32_TIMCAP_USE_TIM1 FALSE -#define STM32_TIMCAP_USE_TIM2 FALSE -#define STM32_TIMCAP_USE_TIM3 TRUE -#define STM32_TIMCAP_USE_TIM4 FALSE -#define STM32_TIMCAP_USE_TIM5 FALSE -#define STM32_TIMCAP_USE_TIM8 FALSE -#define STM32_TIMCAP_USE_TIM9 FALSE -#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 -#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 -#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 -#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 -#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 -#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 -#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.config b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.config deleted file mode 100644 index e0284f4..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.config +++ /dev/null @@ -1,2 +0,0 @@ -// Add predefined macros for your project here. For example: -// #define THE_ANSWER 42 diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator deleted file mode 100644 index e94cbbd..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator +++ /dev/null @@ -1 +0,0 @@ -[General] diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator.user b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator.user deleted file mode 100644 index 80d783a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.creator.user +++ /dev/null @@ -1,156 +0,0 @@ - - - - - - EnvironmentId - {19e2588b-face-4845-bb71-0434e910b089} - - - ProjectExplorer.Project.ActiveTarget - 0 - - - ProjectExplorer.Project.EditorSettings - - true - false - true - - Cpp - - CppGlobal - - - 1 - UTF-8 - false - 4 - false - 80 - true - true - 1 - true - false - 0 - true - 0 - 8 - true - 1 - true - true - true - false - - - - ProjectExplorer.Project.PluginSettings - - - - ProjectExplorer.Project.Target.0 - - arm-none-eabi - arm-none-eabi - {a0910195-c955-413e-bfeb-0bb1d84cfc8b} - 0 - -1 - 1 - - /home/barthess/projects/chibios-git/community/testhal/STM32/STM32F4xx/EICU - - - - all - - false - -j4 - - true - Make - - GenericProjectManager.GenericMakeStep - - 1 - Build - - ProjectExplorer.BuildSteps.Build - - - - - clean - - true - - - true - Make - - GenericProjectManager.GenericMakeStep - - 1 - Clean - - ProjectExplorer.BuildSteps.Clean - - 2 - false - - Default - Default - GenericProjectManager.GenericBuildConfiguration - - 1 - 0 - - - 2 - - - - false - %{buildDir} - Custom Executable - - ProjectExplorer.CustomExecutableRunConfiguration - 3768 - false - true - false - false - true - - - /home/barthess/projects/chibios-git/community/testhal/STM32/STM32F4xx/EICU/build/ch.elf - /home/barthess/projects/chibios-git/community/testhal/STM32/STM32F4xx/EICU - Run on GDB server or hardware debugger - - BareMetal.CustomRunConfig - - - 3768 - false - true - false - false - true - - 2 - - - - ProjectExplorer.Project.TargetCount - 1 - - - ProjectExplorer.Project.Updater.FileVersion - 18 - - - Version - 18 - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.files b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.files deleted file mode 100644 index f154876..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.files +++ /dev/null @@ -1,3443 +0,0 @@ -community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h -community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h -community/demos/NRF51/RT-WVSHARE_BLE400/main.c -community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c -community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h -community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h -community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c -community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h -community/os/common/ports/ARMCMx/devices/NRF51822/cmparams.h -community/os/common/ports/ARMCMx/devices/TM4C123x/cmparams.h -community/os/common/ports/ARMCMx/devices/TM4C129x/cmparams.h -community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c -community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h -community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c -community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h -community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c -community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h -community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c -community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h -community/os/hal/boards/WVSHARE_BLE400/board.c -community/os/hal/boards/WVSHARE_BLE400/board.h -community/os/hal/include/eicu.h -community/os/hal/include/hal_community.h -community/os/hal/include/nand.h -community/os/hal/include/onewire.h -community/os/hal/ports/NRF51/NRF51822/hal_lld.c -community/os/hal/ports/NRF51/NRF51822/hal_lld.h -community/os/hal/ports/NRF51/NRF51822/nrf51.h -community/os/hal/ports/NRF51/NRF51822/pal_lld.c -community/os/hal/ports/NRF51/NRF51822/pal_lld.h -community/os/hal/ports/NRF51/NRF51822/serial_lld.c -community/os/hal/ports/NRF51/NRF51822/serial_lld.h -community/os/hal/ports/NRF51/NRF51822/st_lld.c -community/os/hal/ports/NRF51/NRF51822/st_lld.h -community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.c -community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.h -community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.c -community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.h -community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.c -community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.h -community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.c -community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.h -community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.c -community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.h -community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.c -community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.h -community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.c -community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.h -community/os/hal/ports/TIVA/LLD/ext_lld.c -community/os/hal/ports/TIVA/LLD/ext_lld.h -community/os/hal/ports/TIVA/LLD/gpt_lld.c -community/os/hal/ports/TIVA/LLD/gpt_lld.h -community/os/hal/ports/TIVA/LLD/i2c_lld.c -community/os/hal/ports/TIVA/LLD/i2c_lld.h -community/os/hal/ports/TIVA/LLD/mac_lld.c -community/os/hal/ports/TIVA/LLD/mac_lld.h -community/os/hal/ports/TIVA/LLD/pal_lld.c -community/os/hal/ports/TIVA/LLD/pal_lld.h -community/os/hal/ports/TIVA/LLD/pwm_lld.c -community/os/hal/ports/TIVA/LLD/pwm_lld.h -community/os/hal/ports/TIVA/LLD/serial_lld.c -community/os/hal/ports/TIVA/LLD/serial_lld.h -community/os/hal/ports/TIVA/LLD/spi_lld.c -community/os/hal/ports/TIVA/LLD/spi_lld.h -community/os/hal/ports/TIVA/LLD/st_lld.c -community/os/hal/ports/TIVA/LLD/st_lld.h -community/os/hal/ports/TIVA/LLD/tiva_gpt.h -community/os/hal/ports/TIVA/LLD/tiva_udma.c -community/os/hal/ports/TIVA/LLD/tiva_udma.h -community/os/hal/ports/TIVA/TM4C123x/hal_lld.c -community/os/hal/ports/TIVA/TM4C123x/hal_lld.h -community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h -community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h -community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h -community/os/hal/ports/TIVA/TM4C129x/hal_lld.c -community/os/hal/ports/TIVA/TM4C129x/hal_lld.h -community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h -community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h -community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h -community/os/hal/src/eicu.c -community/os/hal/src/hal_community.c -community/os/hal/src/nand.c -community/os/hal/src/onewire.c -community/os/various/devices_lib/lcd/ili9341.c -community/os/various/devices_lib/lcd/ili9341.h -community/os/various/devices_lib/mems/l3gd20.c -community/os/various/devices_lib/mems/l3gd20.h -community/os/various/devices_lib/mems/lis3mdl.c -community/os/various/devices_lib/mems/lis3mdl.h -community/os/various/devices_lib/mems/lsm303dlhc.c -community/os/various/devices_lib/mems/lsm303dlhc.h -community/os/various/devices_lib/mems/lsm6ds0.c -community/os/various/devices_lib/mems/lsm6ds0.h -community/os/various/devices_lib/others/max7219.c -community/os/various/devices_lib/others/max7219.h -community/os/various/devices_lib/rf/nrf24l01.c -community/os/various/devices_lib/rf/nrf24l01.h -community/os/various/bitmap.c -community/os/various/bitmap.h -community/os/various/memtest.cpp -community/os/various/memtest.hpp -community/testhal/STM32/STM32F0xx/onewire/chconf.h -community/testhal/STM32/STM32F0xx/onewire/halconf.h -community/testhal/STM32/STM32F0xx/onewire/halconf_community.h -community/testhal/STM32/STM32F0xx/onewire/main.c -community/testhal/STM32/STM32F0xx/onewire/mcuconf.h -community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F0xx/onewire/onewire_test.c -community/testhal/STM32/STM32F0xx/onewire/onewire_test.h -community/testhal/STM32/STM32F0xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F1xx/onewire/chconf.h -community/testhal/STM32/STM32F1xx/onewire/halconf.h -community/testhal/STM32/STM32F1xx/onewire/halconf_community.h -community/testhal/STM32/STM32F1xx/onewire/main.c -community/testhal/STM32/STM32F1xx/onewire/mcuconf.h -community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F1xx/onewire/onewire_test.c -community/testhal/STM32/STM32F1xx/onewire/onewire_test.h -community/testhal/STM32/STM32F1xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/main.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/NRF51822/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C123x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C129x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400/board.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400/board.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/eicu.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/hal_community.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/nand.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/onewire.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/nrf51.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_gpt.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_udma.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_udma.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/eicu.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/hal_community.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/nand.c -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/onewire.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd/ili9341.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd/ili9341.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/l3gd20.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/l3gd20.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lis3mdl.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lis3mdl.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm303dlhc.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm303dlhc.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm6ds0.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm6ds0.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others/max7219.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others/max7219.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf/nrf24l01.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf/nrf24l01.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/bitmap.c -community/testhal/STM32/STM32F4xx/EICU/community/os/various/bitmap.h -community/testhal/STM32/STM32F4xx/EICU/community/os/various/memtest.cpp -community/testhal/STM32/STM32F4xx/EICU/community/os/various/memtest.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/NRF51822/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C123x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C129x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/eicu.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/hal_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/nand.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/onewire.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/nrf51.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_gpt.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_udma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_udma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/eicu.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/hal_community.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/nand.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/onewire.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd/ili9341.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd/ili9341.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/l3gd20.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/l3gd20.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lis3mdl.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lis3mdl.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm303dlhc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm303dlhc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm6ds0.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm6ds0.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others/max7219.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others/max7219.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf/nrf24l01.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf/nrf24l01.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/bitmap.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/bitmap.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/memtest.cpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/memtest.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res/wolf3d_vgagraph_chunk87.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/usbcfg.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/wolf3d_palette.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/NRF51822/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C123x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C129x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/eicu.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/hal_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/nand.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include/onewire.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/nrf51.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1/stm32_dma2d.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sdram.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/fsmc_sram.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1/nand_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1/stm32_ltdc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1/eicu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_gpt.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_udma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD/tiva_udma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tiva_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tiva_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x/tm4c123x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tiva_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tiva_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x/tm4c129x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/eicu.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/hal_community.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/nand.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/src/onewire.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd/ili9341.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd/ili9341.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/l3gd20.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/l3gd20.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lis3mdl.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lis3mdl.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm303dlhc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm303dlhc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm6ds0.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems/lsm6ds0.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others/max7219.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others/max7219.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf/nrf24l01.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf/nrf24l01.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/bitmap.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/bitmap.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/memtest.cpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/memtest.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/compilers/GCC/crt1.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x/armparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x/lpc214x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/compilers/GCC/crt1.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/compilers/GCC/vectors.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/K20x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/KL2x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F0xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F1xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F3xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F4xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L0xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L1xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/compilers/GCC/vectors.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_common_tables.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_const_structs.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_math.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm0.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm0plus.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm3.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm4.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm4_simd.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cmFunc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cmInstr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS/kl25z.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS/mk20d5.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f030x6.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f030x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f031x6.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f038xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f042x6.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f048xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f051x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f058xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f071xb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f072xb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f078xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f10x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f301x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f302x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f302xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f303x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f303xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f318xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f328xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f334x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f358xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f373xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f378xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f3xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f401xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f401xe.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f405xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f407xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f411xe.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f415xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f417xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f427xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f429xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f437xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f439xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f4xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l051xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l052xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l053xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l061xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l062xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l063xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l1xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f10x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f3xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f4xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32l0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32l1xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/buzzer.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/buzzer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/adc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/can.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/dac.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/ext.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/gpt.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_channels.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_files.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_ioblock.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_mmcsd.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_queues.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_streams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/i2c.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/i2s.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/icu.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mac.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mii.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mmc_spi.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/pal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/pwm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/rtc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/sdc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/serial.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/serial_usb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/spi.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/st.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/uart.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/usb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/chprintf.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/chprintf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/memstreams.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/memstreams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/nullstreams.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/nullstreams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/avr_pins.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/avr_timers.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx/nvic.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx/nvic.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/kinetis_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/kinetis_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/kinetis_tpm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/vic.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/vic.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/console.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/console.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1/dac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1/dac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/stm32_otg.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/stm32_tim.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/stm32_usb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/can_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/can_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/sdc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/sdc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f100.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f103.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f105_f107.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/adc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/can.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/dac.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/ext.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/gpt.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal_mmcsd.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal_queues.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/i2c.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/i2s.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/icu.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/mac.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/mmc_spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/pal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/pwm.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/rtc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/sdc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/serial.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/serial_usb.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/st.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/uart.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/usb.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/can_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/can_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/dac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/dac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2s_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2s_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/sdc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/sdc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/include/nil.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v6m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v6m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v7m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v7m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/src/nil.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/ch.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chbsem.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chcond.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chdebug.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chdynamic.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chevents.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chheap.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chlicense.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmboxes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmemcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmempools.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmsg.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmtx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chqueues.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chregistry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chschd.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsem.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chstats.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chstreams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsys.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsystypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chthreads.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chtm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chvt.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/IAR/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/RVCT/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v6m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v6m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v7m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v7m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chcond.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chdebug.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chdynamic.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chevents.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chheap.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmboxes.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmemcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmempools.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmsg.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmtx.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chqueues.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chregistry.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chschd.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chsem.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chstats.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chsys.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chthreads.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chtm.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chvt.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta/module.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta/module.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/ch.cpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/ch.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/syscalls_cpp.cpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/syscalls_cpp.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel/lis302dl.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel/lis302dl.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd/lcd3310.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd/lcd3310.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/fatfs_bindings/fatfs_diskio.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/fatfs_bindings/fatfs_syscall.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/cc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/perf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/sys_arch.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/sys_arch.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/lwipthread.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/lwipthread.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/evtimer.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/evtimer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/shell.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/shell.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/syscalls.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/compilers/GCC/crt1.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x/armparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x/lpc214x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/compilers/GCC/crt1.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/compilers/GCC/vectors.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/K20x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/KL2x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F0xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F1xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F3xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F4xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L0xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L1xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/compilers/GCC/vectors.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/boot.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/intc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_common_tables.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_const_structs.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_math.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm0.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm0plus.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm3.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm4.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm4_simd.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cmFunc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cmInstr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS/kl25z.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS/mk20d5.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f030x6.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f030x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f031x6.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f038xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f042x6.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f048xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f051x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f058xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f071xb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f072xb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f078xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f10x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f301x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f302x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f302xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f303x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f303xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f318xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f328xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f334x8.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f358xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f373xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f378xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f3xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f401xc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f401xe.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f405xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f407xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f411xe.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f415xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f417xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f427xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f429xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f437xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f439xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f4xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l051xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l052xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l053xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l061xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l062xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l063xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l1xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f10x.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f3xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f4xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32l0xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32l1xx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/buzzer.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/buzzer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/adc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/can.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/dac.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/ext.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/gpt.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_channels.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_files.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_ioblock.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_mmcsd.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_queues.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_streams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/i2c.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/i2s.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/icu.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mac.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mii.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mmc_spi.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/pal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/pwm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/rtc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/sdc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/serial.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/serial_usb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/spi.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/st.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/uart.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include/usb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/chprintf.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/chprintf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/memstreams.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/memstreams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/nullstreams.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/nullstreams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/avr_pins.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/avr_timers.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx/nvic.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx/nvic.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/kinetis_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/kinetis_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/kinetis_tpm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/vic.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/vic.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/console.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/console.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1/dac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1/dac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/stm32_otg.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/stm32_tim.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/stm32_usb.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/can_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/can_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/sdc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/sdc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f100.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f103.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f105_f107.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/adc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/can.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/dac.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/ext.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/gpt.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal_mmcsd.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal_queues.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/i2c.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/i2s.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/icu.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/mac.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/mmc_spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/pal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/pwm.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/rtc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/sdc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/serial.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/serial_usb.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/st.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/uart.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/src/usb.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal/osal.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal/osal.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/can_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/can_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/dac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/dac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2s_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2s_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/sdc_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/sdc_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/include/nil.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v6m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v6m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v7m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v7m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/src/nil.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/ch.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chbsem.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chcond.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chdebug.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chdynamic.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chevents.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chheap.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chlicense.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmboxes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmemcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmempools.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmsg.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmtx.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chqueues.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chregistry.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chschd.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsem.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chstats.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chstreams.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsys.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsystypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chthreads.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chtm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chvt.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/IAR/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/RVCT/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v6m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v6m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v7m.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v7m.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chcond.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chdebug.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chdynamic.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chevents.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chheap.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmboxes.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmemcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmempools.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmsg.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmtx.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chqueues.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chregistry.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chschd.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chsem.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chstats.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chsys.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chthreads.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chtm.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chvt.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta/module.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta/module.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chcore.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chcore.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/ch.cpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/ch.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/syscalls_cpp.cpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/syscalls_cpp.hpp -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel/lis302dl.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel/lis302dl.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd/lcd3310.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd/lcd3310.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/fatfs_bindings/fatfs_diskio.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/fatfs_bindings/fatfs_syscall.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/cc.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/perf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/sys_arch.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/sys_arch.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/lwipthread.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/lwipthread.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/evtimer.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/evtimer.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/shell.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/shell.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/syscalls.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire/search_rom_synth.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/chconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/halconf.h -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/main.c -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/compilers/GCC/crt1.c -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x/armparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x/lpc214x.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/compilers/GCC/crt1.c -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/compilers/GCC/vectors.c -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/K20x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/KL2x/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F0xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F1xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F3xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F4xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L0xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L1xx/cmparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/compilers/GCC/vectors.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/boot.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/intc.h -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM/ppcparams.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_common_tables.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_const_structs.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/arm_math.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm0.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm0plus.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm3.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm4.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cm4_simd.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cmFunc.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include/core_cmInstr.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS/kl25z.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS/mk20d5.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f030x6.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f030x8.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f031x6.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f038xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f042x6.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f048xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f051x8.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f058xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f071xb.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f072xb.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f078xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f0xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f10x.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f301x8.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f302x8.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f302xc.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f303x8.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f303xc.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f318xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f328xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f334x8.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f358xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f373xc.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f378xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f3xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f401xc.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f401xe.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f405xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f407xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f411xe.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f415xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f417xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f427xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f429xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f437xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f439xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32f4xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l051xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l052xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l053xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l061xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l062xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l063xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l0xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/stm32l1xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f0xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f10x.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f3xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32f4xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32l0xx.h -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST/system_stm32l1xx.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/buzzer.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148/buzzer.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/adc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/can.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/dac.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/ext.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/gpt.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_channels.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_files.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_ioblock.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_mmcsd.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_queues.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/hal_streams.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/i2c.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/i2s.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/icu.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mac.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mii.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/mmc_spi.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/pal.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/pwm.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/rtc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/sdc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/serial.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/serial_usb.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/spi.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/st.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/uart.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/include/usb.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/chprintf.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/chprintf.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/memstreams.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/memstreams.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/nullstreams.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams/nullstreams.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil/osal.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil/osal.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx/osal.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx/osal.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt/osal.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt/osal.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/avr_pins.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/avr_timers.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx/nvic.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx/nvic.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/kinetis_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/kinetis_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/kinetis_tpm.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/vic.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x/vic.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/console.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/console.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1/dac_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1/dac_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/stm32_otg.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/i2s_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1/stm32_tim.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/stm32_usb.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/can_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/can_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/sdc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/sdc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f100.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f103.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/hal_lld_f105_f107.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/ext_lld_isr.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/ext_lld_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_dma.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_dma.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_isr.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_rcc.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx/stm32_registry.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/adc.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/can.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/dac.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/ext.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/gpt.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal_mmcsd.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/hal_queues.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/i2c.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/i2s.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/icu.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/mac.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/mmc_spi.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/pal.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/pwm.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/rtc.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/sdc.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/serial.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/serial_usb.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/spi.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/st.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/uart.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/src/usb.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal/osal.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal/osal.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/adc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/adc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/can_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/can_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/dac_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/dac_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/ext_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/ext_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/gpt_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/gpt_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/hal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/hal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/halconf.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2c_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2c_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2s_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/i2s_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/icu_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/icu_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mac_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mac_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pal_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pal_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pwm_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/pwm_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/rtc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/rtc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/sdc_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/sdc_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/serial_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/serial_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/spi_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/spi_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/st_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/st_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/uart_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/uart_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/usb_lld.c -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/usb_lld.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/include/nil.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v6m.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v6m.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v7m.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/nilcore_v7m.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/compilers/GCC/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/src/nil.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilconf.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore.c -community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/nilcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/os/nil/templates/niltypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/ch.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chbsem.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chcond.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chdebug.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chdynamic.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chevents.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chheap.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chlicense.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmboxes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmemcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmempools.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmsg.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chmtx.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chqueues.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chregistry.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chschd.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsem.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chstats.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chstreams.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsys.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chsystypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chthreads.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chtm.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/include/chvt.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/chcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/IAR/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/RVCT/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_timer.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v6m.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v6m.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v7m.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/chcore_v7m.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/chcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/chcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/chcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/chcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/compilers/GCC/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/chcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/chcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chcond.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chdebug.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chdynamic.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chevents.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chheap.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmboxes.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmemcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmempools.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmsg.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chmtx.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chqueues.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chregistry.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chschd.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chsem.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chstats.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chsys.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chthreads.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chtm.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/src/chvt.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta/module.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta/module.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chconf.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chcore.c -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chcore.h -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/chtypes.h -community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/ch.cpp -community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/ch.hpp -community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/syscalls_cpp.cpp -community/testhal/STM32/STM32F4xx/EICU/os/various/cpp_wrappers/syscalls_cpp.hpp -community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel/lis302dl.c -community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel/lis302dl.h -community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd/lcd3310.c -community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd/lcd3310.h -community/testhal/STM32/STM32F4xx/EICU/os/various/fatfs_bindings/fatfs_diskio.c -community/testhal/STM32/STM32F4xx/EICU/os/various/fatfs_bindings/fatfs_syscall.c -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/cc.h -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/perf.h -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/sys_arch.c -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch/sys_arch.h -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/lwipthread.c -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/lwipthread.h -community/testhal/STM32/STM32F4xx/EICU/os/various/evtimer.c -community/testhal/STM32/STM32F4xx/EICU/os/various/evtimer.h -community/testhal/STM32/STM32F4xx/EICU/os/various/shell.c -community/testhal/STM32/STM32F4xx/EICU/os/various/shell.h -community/testhal/STM32/STM32F4xx/EICU/os/various/syscalls.c -community/testhal/STM32/STM32F4xx/EICU/chconf.h -community/testhal/STM32/STM32F4xx/EICU/halconf.h -community/testhal/STM32/STM32F4xx/EICU/halconf_community.h -community/testhal/STM32/STM32F4xx/EICU/main.c -community/testhal/STM32/STM32F4xx/EICU/mcuconf.h -community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h -community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h -community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c -community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c -community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c -community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h -community/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_NAND/main.c -community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h -community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c -community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c -community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h -community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c -community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h -community/testhal/STM32/STM32F4xx/onewire/chconf.h -community/testhal/STM32/STM32F4xx/onewire/halconf.h -community/testhal/STM32/STM32F4xx/onewire/halconf_community.h -community/testhal/STM32/STM32F4xx/onewire/main.c -community/testhal/STM32/STM32F4xx/onewire/mcuconf.h -community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h -community/testhal/STM32/STM32F4xx/onewire/onewire_test.c -community/testhal/STM32/STM32F4xx/onewire/onewire_test.h -community/testhal/STM32/STM32F4xx/onewire/search_rom_synth.c -community/testhal/TIVA/TM4C123x/EXT/chconf.h -community/testhal/TIVA/TM4C123x/EXT/halconf.h -community/testhal/TIVA/TM4C123x/EXT/main.c -community/testhal/TIVA/TM4C123x/EXT/mcuconf.h -community/testhal/TIVA/TM4C123x/GPT/chconf.h -community/testhal/TIVA/TM4C123x/GPT/halconf.h -community/testhal/TIVA/TM4C123x/GPT/main.c -community/testhal/TIVA/TM4C123x/GPT/mcuconf.h -community/testhal/TIVA/TM4C123x/I2C/chconf.h -community/testhal/TIVA/TM4C123x/I2C/halconf.h -community/testhal/TIVA/TM4C123x/I2C/main.c -community/testhal/TIVA/TM4C123x/I2C/mcuconf.h -community/testhal/TIVA/TM4C123x/PWM/chconf.h -community/testhal/TIVA/TM4C123x/PWM/halconf.h -community/testhal/TIVA/TM4C123x/PWM/main.c -community/testhal/TIVA/TM4C123x/PWM/mcuconf.h -community/testhal/TIVA/TM4C123x/SPI/chconf.h -community/testhal/TIVA/TM4C123x/SPI/halconf.h -community/testhal/TIVA/TM4C123x/SPI/main.c -community/testhal/TIVA/TM4C123x/SPI/mcuconf.h -os/common/ports/ARM/compilers/GCC/crt1.c -os/common/ports/ARM/devices/LPC214x/armparams.h -os/common/ports/ARM/devices/LPC214x/lpc214x.h -os/common/ports/ARMCMx/compilers/GCC/crt1.c -os/common/ports/ARMCMx/compilers/GCC/vectors.c -os/common/ports/ARMCMx/devices/K20x/cmparams.h -os/common/ports/ARMCMx/devices/KL2x/cmparams.h -os/common/ports/ARMCMx/devices/STM32F0xx/cmparams.h -os/common/ports/ARMCMx/devices/STM32F1xx/cmparams.h -os/common/ports/ARMCMx/devices/STM32F3xx/cmparams.h -os/common/ports/ARMCMx/devices/STM32F4xx/cmparams.h -os/common/ports/ARMCMx/devices/STM32L0xx/cmparams.h -os/common/ports/ARMCMx/devices/STM32L1xx/cmparams.h -os/common/ports/e200/compilers/GCC/vectors.h -os/common/ports/e200/devices/SPC560BCxx/boot.h -os/common/ports/e200/devices/SPC560BCxx/intc.h -os/common/ports/e200/devices/SPC560BCxx/ppcparams.h -os/common/ports/e200/devices/SPC560Bxx/boot.h -os/common/ports/e200/devices/SPC560Bxx/intc.h -os/common/ports/e200/devices/SPC560Bxx/ppcparams.h -os/common/ports/e200/devices/SPC560Dxx/boot.h -os/common/ports/e200/devices/SPC560Dxx/intc.h -os/common/ports/e200/devices/SPC560Dxx/ppcparams.h -os/common/ports/e200/devices/SPC560Pxx/boot.h -os/common/ports/e200/devices/SPC560Pxx/intc.h -os/common/ports/e200/devices/SPC560Pxx/ppcparams.h -os/common/ports/e200/devices/SPC563Mxx/boot.h -os/common/ports/e200/devices/SPC563Mxx/intc.h -os/common/ports/e200/devices/SPC563Mxx/ppcparams.h -os/common/ports/e200/devices/SPC564Axx/boot.h -os/common/ports/e200/devices/SPC564Axx/intc.h -os/common/ports/e200/devices/SPC564Axx/ppcparams.h -os/common/ports/e200/devices/SPC56ECxx/boot.h -os/common/ports/e200/devices/SPC56ECxx/intc.h -os/common/ports/e200/devices/SPC56ECxx/ppcparams.h -os/common/ports/e200/devices/SPC56ELxx/boot.h -os/common/ports/e200/devices/SPC56ELxx/intc.h -os/common/ports/e200/devices/SPC56ELxx/ppcparams.h -os/common/ports/e200/devices/SPC57EMxx_HSM/boot.h -os/common/ports/e200/devices/SPC57EMxx_HSM/intc.h -os/common/ports/e200/devices/SPC57EMxx_HSM/ppcparams.h -os/ext/CMSIS/include/arm_common_tables.h -os/ext/CMSIS/include/arm_const_structs.h -os/ext/CMSIS/include/arm_math.h -os/ext/CMSIS/include/core_cm0.h -os/ext/CMSIS/include/core_cm0plus.h -os/ext/CMSIS/include/core_cm3.h -os/ext/CMSIS/include/core_cm4.h -os/ext/CMSIS/include/core_cm4_simd.h -os/ext/CMSIS/include/core_cmFunc.h -os/ext/CMSIS/include/core_cmInstr.h -os/ext/CMSIS/KINETIS/kl25z.h -os/ext/CMSIS/KINETIS/mk20d5.h -os/ext/CMSIS/ST/stm32f030x6.h -os/ext/CMSIS/ST/stm32f030x8.h -os/ext/CMSIS/ST/stm32f031x6.h -os/ext/CMSIS/ST/stm32f038xx.h -os/ext/CMSIS/ST/stm32f042x6.h -os/ext/CMSIS/ST/stm32f048xx.h -os/ext/CMSIS/ST/stm32f051x8.h -os/ext/CMSIS/ST/stm32f058xx.h -os/ext/CMSIS/ST/stm32f071xb.h -os/ext/CMSIS/ST/stm32f072xb.h -os/ext/CMSIS/ST/stm32f078xx.h -os/ext/CMSIS/ST/stm32f0xx.h -os/ext/CMSIS/ST/stm32f10x.h -os/ext/CMSIS/ST/stm32f301x8.h -os/ext/CMSIS/ST/stm32f302x8.h -os/ext/CMSIS/ST/stm32f302xc.h -os/ext/CMSIS/ST/stm32f303x8.h -os/ext/CMSIS/ST/stm32f303xc.h -os/ext/CMSIS/ST/stm32f318xx.h -os/ext/CMSIS/ST/stm32f328xx.h -os/ext/CMSIS/ST/stm32f334x8.h -os/ext/CMSIS/ST/stm32f358xx.h -os/ext/CMSIS/ST/stm32f373xc.h -os/ext/CMSIS/ST/stm32f378xx.h -os/ext/CMSIS/ST/stm32f3xx.h -os/ext/CMSIS/ST/stm32f401xc.h -os/ext/CMSIS/ST/stm32f401xe.h -os/ext/CMSIS/ST/stm32f405xx.h -os/ext/CMSIS/ST/stm32f407xx.h -os/ext/CMSIS/ST/stm32f411xe.h -os/ext/CMSIS/ST/stm32f415xx.h -os/ext/CMSIS/ST/stm32f417xx.h -os/ext/CMSIS/ST/stm32f427xx.h -os/ext/CMSIS/ST/stm32f429xx.h -os/ext/CMSIS/ST/stm32f437xx.h -os/ext/CMSIS/ST/stm32f439xx.h -os/ext/CMSIS/ST/stm32f4xx.h -os/ext/CMSIS/ST/stm32l051xx.h -os/ext/CMSIS/ST/stm32l052xx.h -os/ext/CMSIS/ST/stm32l053xx.h -os/ext/CMSIS/ST/stm32l061xx.h -os/ext/CMSIS/ST/stm32l062xx.h -os/ext/CMSIS/ST/stm32l063xx.h -os/ext/CMSIS/ST/stm32l0xx.h -os/ext/CMSIS/ST/stm32l1xx.h -os/ext/CMSIS/ST/system_stm32f0xx.h -os/ext/CMSIS/ST/system_stm32f10x.h -os/ext/CMSIS/ST/system_stm32f3xx.h -os/ext/CMSIS/ST/system_stm32f4xx.h -os/ext/CMSIS/ST/system_stm32l0xx.h -os/ext/CMSIS/ST/system_stm32l1xx.h -os/hal/boards/ARDUINO_MEGA/board.c -os/hal/boards/ARDUINO_MEGA/board.h -os/hal/boards/EA_LPCXPRESSO_11C24/board.c -os/hal/boards/EA_LPCXPRESSO_11C24/board.h -os/hal/boards/EA_LPCXPRESSO_BB_1114/board.c -os/hal/boards/EA_LPCXPRESSO_BB_1114/board.h -os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.c -os/hal/boards/EA_LPCXPRESSO_BB_11U14/board.h -os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c -os/hal/boards/EA_LPCXPRESSO_BB_1343/board.h -os/hal/boards/EA_LPCXPRESSO_LPC812/board.c -os/hal/boards/EA_LPCXPRESSO_LPC812/board.h -os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c -os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h -os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.c -os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.h -os/hal/boards/MAPLEMINI_STM32_F103/board.c -os/hal/boards/MAPLEMINI_STM32_F103/board.h -os/hal/boards/MCHCK_K20/board.c -os/hal/boards/MCHCK_K20/board.h -os/hal/boards/NGX_BB_LPC11U14/board.c -os/hal/boards/NGX_BB_LPC11U14/board.h -os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.c -os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h -os/hal/boards/OLIMEX_AVR_CAN/board.c -os/hal/boards/OLIMEX_AVR_CAN/board.h -os/hal/boards/OLIMEX_AVR_MT_128/board.c -os/hal/boards/OLIMEX_AVR_MT_128/board.h -os/hal/boards/OLIMEX_LPC_P1227/board.c -os/hal/boards/OLIMEX_LPC_P1227/board.h -os/hal/boards/OLIMEX_LPC_P1343/board.c -os/hal/boards/OLIMEX_LPC_P1343/board.h -os/hal/boards/OLIMEX_LPC_P2148/board.c -os/hal/boards/OLIMEX_LPC_P2148/board.h -os/hal/boards/OLIMEX_LPC_P2148/buzzer.c -os/hal/boards/OLIMEX_LPC_P2148/buzzer.h -os/hal/boards/OLIMEX_MSP430_P1611/board.c -os/hal/boards/OLIMEX_MSP430_P1611/board.h -os/hal/boards/OLIMEX_SAM7_EX256/board.c -os/hal/boards/OLIMEX_SAM7_EX256/board.h -os/hal/boards/OLIMEX_SAM7_P256/board.c -os/hal/boards/OLIMEX_SAM7_P256/board.h -os/hal/boards/OLIMEX_STM32_103STK/board.c -os/hal/boards/OLIMEX_STM32_103STK/board.h -os/hal/boards/OLIMEX_STM32_E407/board.c -os/hal/boards/OLIMEX_STM32_E407/board.h -os/hal/boards/OLIMEX_STM32_E407_REV_D/board.c -os/hal/boards/OLIMEX_STM32_E407_REV_D/board.h -os/hal/boards/OLIMEX_STM32_H103/board.c -os/hal/boards/OLIMEX_STM32_H103/board.h -os/hal/boards/OLIMEX_STM32_H407/board.c -os/hal/boards/OLIMEX_STM32_H407/board.h -os/hal/boards/OLIMEX_STM32_LCD/board.c -os/hal/boards/OLIMEX_STM32_LCD/board.h -os/hal/boards/OLIMEX_STM32_P103/board.c -os/hal/boards/OLIMEX_STM32_P103/board.h -os/hal/boards/OLIMEX_STM32_P107/board.c -os/hal/boards/OLIMEX_STM32_P107/board.h -os/hal/boards/OLIMEX_STM32_P407/board.c -os/hal/boards/OLIMEX_STM32_P407/board.h -os/hal/boards/PJRC_TEENSY_3/board.c -os/hal/boards/PJRC_TEENSY_3/board.h -os/hal/boards/RAISONANCE_REVA_STM8S/board.c -os/hal/boards/RAISONANCE_REVA_STM8S/board.h -os/hal/boards/simulator/board.c -os/hal/boards/simulator/board.h -os/hal/boards/ST_EVB_SPC560B/board.c -os/hal/boards/ST_EVB_SPC560B/board.h -os/hal/boards/ST_EVB_SPC560BC/board.c -os/hal/boards/ST_EVB_SPC560BC/board.h -os/hal/boards/ST_EVB_SPC560D/board.c -os/hal/boards/ST_EVB_SPC560D/board.h -os/hal/boards/ST_EVB_SPC560P/board.c -os/hal/boards/ST_EVB_SPC560P/board.h -os/hal/boards/ST_EVB_SPC563M/board.c -os/hal/boards/ST_EVB_SPC563M/board.h -os/hal/boards/ST_EVB_SPC564A/board.c -os/hal/boards/ST_EVB_SPC564A/board.h -os/hal/boards/ST_EVB_SPC56EC/board.c -os/hal/boards/ST_EVB_SPC56EC/board.h -os/hal/boards/ST_EVB_SPC56EL/board.c -os/hal/boards/ST_EVB_SPC56EL/board.h -os/hal/boards/ST_INEMO_M1_DISCOVERY/board.c -os/hal/boards/ST_INEMO_M1_DISCOVERY/board.h -os/hal/boards/ST_NUCLEO_F030R8/board.c -os/hal/boards/ST_NUCLEO_F030R8/board.h -os/hal/boards/ST_NUCLEO_F103RB/board.c -os/hal/boards/ST_NUCLEO_F103RB/board.h -os/hal/boards/ST_NUCLEO_F302R8/board.c -os/hal/boards/ST_NUCLEO_F302R8/board.h -os/hal/boards/ST_NUCLEO_F334R8/board.c -os/hal/boards/ST_NUCLEO_F334R8/board.h -os/hal/boards/ST_NUCLEO_F401RE/board.c -os/hal/boards/ST_NUCLEO_F401RE/board.h -os/hal/boards/ST_NUCLEO_F411RE/board.c -os/hal/boards/ST_NUCLEO_F411RE/board.h -os/hal/boards/ST_NUCLEO_L152RE/board.c -os/hal/boards/ST_NUCLEO_L152RE/board.h -os/hal/boards/ST_STM3210C_EVAL/board.c -os/hal/boards/ST_STM3210C_EVAL/board.h -os/hal/boards/ST_STM3210E_EVAL/board.c -os/hal/boards/ST_STM3210E_EVAL/board.h -os/hal/boards/ST_STM3220G_EVAL/board.c -os/hal/boards/ST_STM3220G_EVAL/board.h -os/hal/boards/ST_STM32373C_EVAL/board.c -os/hal/boards/ST_STM32373C_EVAL/board.h -os/hal/boards/ST_STM32F072B_DISCOVERY/board.c -os/hal/boards/ST_STM32F072B_DISCOVERY/board.h -os/hal/boards/ST_STM32F0_DISCOVERY/board.c -os/hal/boards/ST_STM32F0_DISCOVERY/board.h -os/hal/boards/ST_STM32F3_DISCOVERY/board.c -os/hal/boards/ST_STM32F3_DISCOVERY/board.h -os/hal/boards/ST_STM32F401C_DISCOVERY/board.c -os/hal/boards/ST_STM32F401C_DISCOVERY/board.h -os/hal/boards/ST_STM32F429I_DISCOVERY/board.c -os/hal/boards/ST_STM32F429I_DISCOVERY/board.h -os/hal/boards/ST_STM32F4_DISCOVERY/board.c -os/hal/boards/ST_STM32F4_DISCOVERY/board.h -os/hal/boards/ST_STM32L_DISCOVERY/board.c -os/hal/boards/ST_STM32L_DISCOVERY/board.h -os/hal/boards/ST_STM32VL_DISCOVERY/board.c -os/hal/boards/ST_STM32VL_DISCOVERY/board.h -os/hal/boards/ST_STM8L_DISCOVERY/board.c -os/hal/boards/ST_STM8L_DISCOVERY/board.h -os/hal/boards/ST_STM8S_DISCOVERY/board.c -os/hal/boards/ST_STM8S_DISCOVERY/board.h -os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.c -os/hal/boards/STUDIEL_AT91SAM7A3_EK/board.h -os/hal/include/adc.h -os/hal/include/can.h -os/hal/include/dac.h -os/hal/include/ext.h -os/hal/include/gpt.h -os/hal/include/hal.h -os/hal/include/hal_channels.h -os/hal/include/hal_files.h -os/hal/include/hal_ioblock.h -os/hal/include/hal_mmcsd.h -os/hal/include/hal_queues.h -os/hal/include/hal_streams.h -os/hal/include/i2c.h -os/hal/include/i2s.h -os/hal/include/icu.h -os/hal/include/mac.h -os/hal/include/mii.h -os/hal/include/mmc_spi.h -os/hal/include/pal.h -os/hal/include/pwm.h -os/hal/include/rtc.h -os/hal/include/sdc.h -os/hal/include/serial.h -os/hal/include/serial_usb.h -os/hal/include/spi.h -os/hal/include/st.h -os/hal/include/uart.h -os/hal/include/usb.h -os/hal/lib/streams/chprintf.c -os/hal/lib/streams/chprintf.h -os/hal/lib/streams/memstreams.c -os/hal/lib/streams/memstreams.h -os/hal/lib/streams/nullstreams.c -os/hal/lib/streams/nullstreams.h -os/hal/osal/nil/osal.c -os/hal/osal/nil/osal.h -os/hal/osal/os-less/ARMCMx/osal.c -os/hal/osal/os-less/ARMCMx/osal.h -os/hal/osal/rt/osal.c -os/hal/osal/rt/osal.h -os/hal/ports/AVR/adc_lld.c -os/hal/ports/AVR/adc_lld.h -os/hal/ports/AVR/avr_pins.h -os/hal/ports/AVR/avr_timers.h -os/hal/ports/AVR/gpt_lld.c -os/hal/ports/AVR/gpt_lld.h -os/hal/ports/AVR/hal_lld.c -os/hal/ports/AVR/hal_lld.h -os/hal/ports/AVR/i2c_lld.c -os/hal/ports/AVR/i2c_lld.h -os/hal/ports/AVR/icu_lld.c -os/hal/ports/AVR/icu_lld.h -os/hal/ports/AVR/pal_lld.c -os/hal/ports/AVR/pal_lld.h -os/hal/ports/AVR/pwm_lld.c -os/hal/ports/AVR/pwm_lld.h -os/hal/ports/AVR/serial_lld.c -os/hal/ports/AVR/serial_lld.h -os/hal/ports/AVR/spi_lld.c -os/hal/ports/AVR/spi_lld.h -os/hal/ports/AVR/st_lld.c -os/hal/ports/AVR/st_lld.h -os/hal/ports/common/ARMCMx/nvic.c -os/hal/ports/common/ARMCMx/nvic.h -os/hal/ports/KINETIS/K20x/gpt_lld.c -os/hal/ports/KINETIS/K20x/gpt_lld.h -os/hal/ports/KINETIS/K20x/hal_lld.c -os/hal/ports/KINETIS/K20x/hal_lld.h -os/hal/ports/KINETIS/K20x/kinetis_registry.h -os/hal/ports/KINETIS/K20x/pal_lld.c -os/hal/ports/KINETIS/K20x/pal_lld.h -os/hal/ports/KINETIS/K20x/serial_lld.c -os/hal/ports/KINETIS/K20x/serial_lld.h -os/hal/ports/KINETIS/K20x/spi_lld.c -os/hal/ports/KINETIS/K20x/spi_lld.h -os/hal/ports/KINETIS/K20x/st_lld.c -os/hal/ports/KINETIS/K20x/st_lld.h -os/hal/ports/KINETIS/KL2x/hal_lld.c -os/hal/ports/KINETIS/KL2x/hal_lld.h -os/hal/ports/KINETIS/KL2x/kinetis_registry.h -os/hal/ports/KINETIS/KL2x/kinetis_tpm.h -os/hal/ports/KINETIS/KL2x/pal_lld.c -os/hal/ports/KINETIS/KL2x/pal_lld.h -os/hal/ports/KINETIS/KL2x/pwm_lld.c -os/hal/ports/KINETIS/KL2x/pwm_lld.h -os/hal/ports/KINETIS/KL2x/serial_lld.c -os/hal/ports/KINETIS/KL2x/serial_lld.h -os/hal/ports/KINETIS/KL2x/st_lld.c -os/hal/ports/KINETIS/KL2x/st_lld.h -os/hal/ports/KINETIS/LLD/adc_lld.c -os/hal/ports/KINETIS/LLD/adc_lld.h -os/hal/ports/KINETIS/LLD/ext_lld.c -os/hal/ports/KINETIS/LLD/ext_lld.h -os/hal/ports/KINETIS/LLD/i2c_lld.c -os/hal/ports/KINETIS/LLD/i2c_lld.h -os/hal/ports/LPC/LPC214x/hal_lld.c -os/hal/ports/LPC/LPC214x/hal_lld.h -os/hal/ports/LPC/LPC214x/pal_lld.c -os/hal/ports/LPC/LPC214x/pal_lld.h -os/hal/ports/LPC/LPC214x/serial_lld.c -os/hal/ports/LPC/LPC214x/serial_lld.h -os/hal/ports/LPC/LPC214x/spi_lld.c -os/hal/ports/LPC/LPC214x/spi_lld.h -os/hal/ports/LPC/LPC214x/st_lld.c -os/hal/ports/LPC/LPC214x/st_lld.h -os/hal/ports/LPC/LPC214x/vic.c -os/hal/ports/LPC/LPC214x/vic.h -os/hal/ports/simulator/win32/hal_lld.c -os/hal/ports/simulator/win32/hal_lld.h -os/hal/ports/simulator/win32/serial_lld.c -os/hal/ports/simulator/win32/serial_lld.h -os/hal/ports/simulator/console.c -os/hal/ports/simulator/console.h -os/hal/ports/simulator/pal_lld.c -os/hal/ports/simulator/pal_lld.h -os/hal/ports/simulator/st_lld.c -os/hal/ports/simulator/st_lld.h -os/hal/ports/STM32/LLD/DACv1/dac_lld.c -os/hal/ports/STM32/LLD/DACv1/dac_lld.h -os/hal/ports/STM32/LLD/DMAv1/stm32_dma.c -os/hal/ports/STM32/LLD/DMAv1/stm32_dma.h -os/hal/ports/STM32/LLD/GPIOv1/pal_lld.c -os/hal/ports/STM32/LLD/GPIOv1/pal_lld.h -os/hal/ports/STM32/LLD/GPIOv2/pal_lld.c -os/hal/ports/STM32/LLD/GPIOv2/pal_lld.h -os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.c -os/hal/ports/STM32/LLD/I2Cv1/i2c_lld.h -os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.c -os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h -os/hal/ports/STM32/LLD/OTGv1/stm32_otg.h -os/hal/ports/STM32/LLD/OTGv1/usb_lld.c -os/hal/ports/STM32/LLD/OTGv1/usb_lld.h -os/hal/ports/STM32/LLD/RTCv1/rtc_lld.c -os/hal/ports/STM32/LLD/RTCv1/rtc_lld.h -os/hal/ports/STM32/LLD/RTCv2/rtc_lld.c -os/hal/ports/STM32/LLD/RTCv2/rtc_lld.h -os/hal/ports/STM32/LLD/SPIv1/i2s_lld.c -os/hal/ports/STM32/LLD/SPIv1/i2s_lld.h -os/hal/ports/STM32/LLD/SPIv1/spi_lld.c -os/hal/ports/STM32/LLD/SPIv1/spi_lld.h -os/hal/ports/STM32/LLD/SPIv2/spi_lld.c -os/hal/ports/STM32/LLD/SPIv2/spi_lld.h -os/hal/ports/STM32/LLD/TIMv1/gpt_lld.c -os/hal/ports/STM32/LLD/TIMv1/gpt_lld.h -os/hal/ports/STM32/LLD/TIMv1/icu_lld.c -os/hal/ports/STM32/LLD/TIMv1/icu_lld.h -os/hal/ports/STM32/LLD/TIMv1/pwm_lld.c -os/hal/ports/STM32/LLD/TIMv1/pwm_lld.h -os/hal/ports/STM32/LLD/TIMv1/st_lld.c -os/hal/ports/STM32/LLD/TIMv1/st_lld.h -os/hal/ports/STM32/LLD/TIMv1/stm32_tim.h -os/hal/ports/STM32/LLD/USARTv1/serial_lld.c -os/hal/ports/STM32/LLD/USARTv1/serial_lld.h -os/hal/ports/STM32/LLD/USARTv1/uart_lld.c -os/hal/ports/STM32/LLD/USARTv1/uart_lld.h -os/hal/ports/STM32/LLD/USARTv2/serial_lld.c -os/hal/ports/STM32/LLD/USARTv2/serial_lld.h -os/hal/ports/STM32/LLD/USARTv2/uart_lld.c -os/hal/ports/STM32/LLD/USARTv2/uart_lld.h -os/hal/ports/STM32/LLD/USBv1/stm32_usb.h -os/hal/ports/STM32/LLD/USBv1/usb_lld.c -os/hal/ports/STM32/LLD/USBv1/usb_lld.h -os/hal/ports/STM32/LLD/can_lld.c -os/hal/ports/STM32/LLD/can_lld.h -os/hal/ports/STM32/LLD/ext_lld.c -os/hal/ports/STM32/LLD/ext_lld.h -os/hal/ports/STM32/LLD/mac_lld.c -os/hal/ports/STM32/LLD/mac_lld.h -os/hal/ports/STM32/LLD/sdc_lld.c -os/hal/ports/STM32/LLD/sdc_lld.h -os/hal/ports/STM32/STM32F0xx/adc_lld.c -os/hal/ports/STM32/STM32F0xx/adc_lld.h -os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c -os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h -os/hal/ports/STM32/STM32F0xx/hal_lld.c -os/hal/ports/STM32/STM32F0xx/hal_lld.h -os/hal/ports/STM32/STM32F0xx/stm32_dma.c -os/hal/ports/STM32/STM32F0xx/stm32_dma.h -os/hal/ports/STM32/STM32F0xx/stm32_isr.h -os/hal/ports/STM32/STM32F0xx/stm32_rcc.h -os/hal/ports/STM32/STM32F0xx/stm32_registry.h -os/hal/ports/STM32/STM32F1xx/adc_lld.c -os/hal/ports/STM32/STM32F1xx/adc_lld.h -os/hal/ports/STM32/STM32F1xx/ext_lld_isr.c -os/hal/ports/STM32/STM32F1xx/ext_lld_isr.h -os/hal/ports/STM32/STM32F1xx/hal_lld.c -os/hal/ports/STM32/STM32F1xx/hal_lld.h -os/hal/ports/STM32/STM32F1xx/hal_lld_f100.h -os/hal/ports/STM32/STM32F1xx/hal_lld_f103.h -os/hal/ports/STM32/STM32F1xx/hal_lld_f105_f107.h -os/hal/ports/STM32/STM32F1xx/stm32_dma.c -os/hal/ports/STM32/STM32F1xx/stm32_dma.h -os/hal/ports/STM32/STM32F1xx/stm32_isr.h -os/hal/ports/STM32/STM32F1xx/stm32_rcc.h -os/hal/ports/STM32/STM32F1xx/stm32_registry.h -os/hal/ports/STM32/STM32F37x/adc_lld.c -os/hal/ports/STM32/STM32F37x/adc_lld.h -os/hal/ports/STM32/STM32F37x/ext_lld_isr.c -os/hal/ports/STM32/STM32F37x/ext_lld_isr.h -os/hal/ports/STM32/STM32F37x/hal_lld.c -os/hal/ports/STM32/STM32F37x/hal_lld.h -os/hal/ports/STM32/STM32F37x/stm32_dma.c -os/hal/ports/STM32/STM32F37x/stm32_dma.h -os/hal/ports/STM32/STM32F37x/stm32_isr.h -os/hal/ports/STM32/STM32F37x/stm32_rcc.h -os/hal/ports/STM32/STM32F37x/stm32_registry.h -os/hal/ports/STM32/STM32F3xx/adc_lld.c -os/hal/ports/STM32/STM32F3xx/adc_lld.h -os/hal/ports/STM32/STM32F3xx/ext_lld_isr.c -os/hal/ports/STM32/STM32F3xx/ext_lld_isr.h -os/hal/ports/STM32/STM32F3xx/hal_lld.c -os/hal/ports/STM32/STM32F3xx/hal_lld.h -os/hal/ports/STM32/STM32F3xx/stm32_dma.c -os/hal/ports/STM32/STM32F3xx/stm32_dma.h -os/hal/ports/STM32/STM32F3xx/stm32_isr.h -os/hal/ports/STM32/STM32F3xx/stm32_rcc.h -os/hal/ports/STM32/STM32F3xx/stm32_registry.h -os/hal/ports/STM32/STM32F4xx/adc_lld.c -os/hal/ports/STM32/STM32F4xx/adc_lld.h -os/hal/ports/STM32/STM32F4xx/ext_lld_isr.c -os/hal/ports/STM32/STM32F4xx/ext_lld_isr.h -os/hal/ports/STM32/STM32F4xx/hal_lld.c -os/hal/ports/STM32/STM32F4xx/hal_lld.h -os/hal/ports/STM32/STM32F4xx/stm32_dma.c -os/hal/ports/STM32/STM32F4xx/stm32_dma.h -os/hal/ports/STM32/STM32F4xx/stm32_isr.h -os/hal/ports/STM32/STM32F4xx/stm32_rcc.h -os/hal/ports/STM32/STM32F4xx/stm32_registry.h -os/hal/ports/STM32/STM32L1xx/adc_lld.c -os/hal/ports/STM32/STM32L1xx/adc_lld.h -os/hal/ports/STM32/STM32L1xx/ext_lld_isr.c -os/hal/ports/STM32/STM32L1xx/ext_lld_isr.h -os/hal/ports/STM32/STM32L1xx/hal_lld.c -os/hal/ports/STM32/STM32L1xx/hal_lld.h -os/hal/ports/STM32/STM32L1xx/stm32_dma.c -os/hal/ports/STM32/STM32L1xx/stm32_dma.h -os/hal/ports/STM32/STM32L1xx/stm32_isr.h -os/hal/ports/STM32/STM32L1xx/stm32_rcc.h -os/hal/ports/STM32/STM32L1xx/stm32_registry.h -os/hal/src/adc.c -os/hal/src/can.c -os/hal/src/dac.c -os/hal/src/ext.c -os/hal/src/gpt.c -os/hal/src/hal.c -os/hal/src/hal_mmcsd.c -os/hal/src/hal_queues.c -os/hal/src/i2c.c -os/hal/src/i2s.c -os/hal/src/icu.c -os/hal/src/mac.c -os/hal/src/mmc_spi.c -os/hal/src/pal.c -os/hal/src/pwm.c -os/hal/src/rtc.c -os/hal/src/sdc.c -os/hal/src/serial.c -os/hal/src/serial_usb.c -os/hal/src/spi.c -os/hal/src/st.c -os/hal/src/uart.c -os/hal/src/usb.c -os/hal/templates/osal/osal.c -os/hal/templates/osal/osal.h -os/hal/templates/adc_lld.c -os/hal/templates/adc_lld.h -os/hal/templates/can_lld.c -os/hal/templates/can_lld.h -os/hal/templates/dac_lld.c -os/hal/templates/dac_lld.h -os/hal/templates/ext_lld.c -os/hal/templates/ext_lld.h -os/hal/templates/gpt_lld.c -os/hal/templates/gpt_lld.h -os/hal/templates/hal_lld.c -os/hal/templates/hal_lld.h -os/hal/templates/halconf.h -os/hal/templates/i2c_lld.c -os/hal/templates/i2c_lld.h -os/hal/templates/i2s_lld.c -os/hal/templates/i2s_lld.h -os/hal/templates/icu_lld.c -os/hal/templates/icu_lld.h -os/hal/templates/mac_lld.c -os/hal/templates/mac_lld.h -os/hal/templates/mcuconf.h -os/hal/templates/pal_lld.c -os/hal/templates/pal_lld.h -os/hal/templates/pwm_lld.c -os/hal/templates/pwm_lld.h -os/hal/templates/rtc_lld.c -os/hal/templates/rtc_lld.h -os/hal/templates/sdc_lld.c -os/hal/templates/sdc_lld.h -os/hal/templates/serial_lld.c -os/hal/templates/serial_lld.h -os/hal/templates/spi_lld.c -os/hal/templates/spi_lld.h -os/hal/templates/st_lld.c -os/hal/templates/st_lld.h -os/hal/templates/uart_lld.c -os/hal/templates/uart_lld.h -os/hal/templates/usb_lld.c -os/hal/templates/usb_lld.h -os/nil/include/nil.h -os/nil/ports/ARMCMx/compilers/GCC/niltypes.h -os/nil/ports/ARMCMx/nilcore.c -os/nil/ports/ARMCMx/nilcore.h -os/nil/ports/ARMCMx/nilcore_timer.h -os/nil/ports/ARMCMx/nilcore_v6m.c -os/nil/ports/ARMCMx/nilcore_v6m.h -os/nil/ports/ARMCMx/nilcore_v7m.c -os/nil/ports/ARMCMx/nilcore_v7m.h -os/nil/ports/AVR/compilers/GCC/niltypes.h -os/nil/ports/AVR/nilcore.c -os/nil/ports/AVR/nilcore.h -os/nil/ports/AVR/nilcore_timer.h -os/nil/ports/e200/compilers/GCC/niltypes.h -os/nil/ports/e200/nilcore.c -os/nil/ports/e200/nilcore.h -os/nil/src/nil.c -os/nil/templates/nilconf.h -os/nil/templates/nilcore.c -os/nil/templates/nilcore.h -os/nil/templates/nilcore_timer.h -os/nil/templates/niltypes.h -os/rt/include/ch.h -os/rt/include/chbsem.h -os/rt/include/chcond.h -os/rt/include/chdebug.h -os/rt/include/chdynamic.h -os/rt/include/chevents.h -os/rt/include/chheap.h -os/rt/include/chlicense.h -os/rt/include/chmboxes.h -os/rt/include/chmemcore.h -os/rt/include/chmempools.h -os/rt/include/chmsg.h -os/rt/include/chmtx.h -os/rt/include/chqueues.h -os/rt/include/chregistry.h -os/rt/include/chschd.h -os/rt/include/chsem.h -os/rt/include/chstats.h -os/rt/include/chstreams.h -os/rt/include/chsys.h -os/rt/include/chsystypes.h -os/rt/include/chthreads.h -os/rt/include/chtm.h -os/rt/include/chvt.h -os/rt/ports/ARM/compilers/GCC/chtypes.h -os/rt/ports/ARM/chcore.c -os/rt/ports/ARM/chcore.h -os/rt/ports/ARM/chcore_timer.h -os/rt/ports/ARMCMx/cmsis_os/cmsis_os.c -os/rt/ports/ARMCMx/cmsis_os/cmsis_os.h -os/rt/ports/ARMCMx/compilers/GCC/chtypes.h -os/rt/ports/ARMCMx/compilers/IAR/chtypes.h -os/rt/ports/ARMCMx/compilers/RVCT/chtypes.h -os/rt/ports/ARMCMx/chcore.c -os/rt/ports/ARMCMx/chcore.h -os/rt/ports/ARMCMx/chcore_timer.h -os/rt/ports/ARMCMx/chcore_v6m.c -os/rt/ports/ARMCMx/chcore_v6m.h -os/rt/ports/ARMCMx/chcore_v7m.c -os/rt/ports/ARMCMx/chcore_v7m.h -os/rt/ports/AVR/compilers/GCC/chtypes.h -os/rt/ports/AVR/chcore.c -os/rt/ports/AVR/chcore.h -os/rt/ports/e200/compilers/GCC/chtypes.h -os/rt/ports/e200/chcore.c -os/rt/ports/e200/chcore.h -os/rt/ports/SIMIA32/compilers/GCC/chtypes.h -os/rt/ports/SIMIA32/chcore.c -os/rt/ports/SIMIA32/chcore.h -os/rt/src/chcond.c -os/rt/src/chdebug.c -os/rt/src/chdynamic.c -os/rt/src/chevents.c -os/rt/src/chheap.c -os/rt/src/chmboxes.c -os/rt/src/chmemcore.c -os/rt/src/chmempools.c -os/rt/src/chmsg.c -os/rt/src/chmtx.c -os/rt/src/chqueues.c -os/rt/src/chregistry.c -os/rt/src/chschd.c -os/rt/src/chsem.c -os/rt/src/chstats.c -os/rt/src/chsys.c -os/rt/src/chthreads.c -os/rt/src/chtm.c -os/rt/src/chvt.c -os/rt/templates/meta/module.c -os/rt/templates/meta/module.h -os/rt/templates/chconf.h -os/rt/templates/chcore.c -os/rt/templates/chcore.h -os/rt/templates/chtypes.h -os/various/cpp_wrappers/ch.cpp -os/various/cpp_wrappers/ch.hpp -os/various/cpp_wrappers/syscalls_cpp.cpp -os/various/cpp_wrappers/syscalls_cpp.hpp -os/various/devices_lib/accel/lis302dl.c -os/various/devices_lib/accel/lis302dl.h -os/various/devices_lib/lcd/lcd3310.c -os/various/devices_lib/lcd/lcd3310.h -os/various/fatfs_bindings/fatfs_diskio.c -os/various/fatfs_bindings/fatfs_syscall.c -os/various/lwip_bindings/arch/cc.h -os/various/lwip_bindings/arch/perf.h -os/various/lwip_bindings/arch/sys_arch.c -os/various/lwip_bindings/arch/sys_arch.h -os/various/lwip_bindings/lwipthread.c -os/various/lwip_bindings/lwipthread.h -os/various/evtimer.c -os/various/evtimer.h -os/various/shell.c -os/various/shell.h -os/various/syscalls.c -chconf.h -halconf.h -halconf_community.h -main.c -mcuconf.h -mcuconf_community.h -Makefile diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.includes b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.includes deleted file mode 100644 index a5e7917..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/EICU_F4x.includes +++ /dev/null @@ -1,769 +0,0 @@ -. -community/demos/NRF51/RT-WVSHARE_BLE400 -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D -community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res -community/demos/TIVA/RT-TM4C123G-LAUNCHPAD -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP -community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web -community/os/common/ports/ARMCMx/devices/NRF51822 -community/os/common/ports/ARMCMx/devices/TM4C123x -community/os/common/ports/ARMCMx/devices/TM4C129x -community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2 -community/os/hal/boards/ST_STM32F0308_DISCOVERY -community/os/hal/boards/TI_TM4C123G_LAUNCHPAD -community/os/hal/boards/TI_TM4C1294_LAUNCHPAD -community/os/hal/boards/WVSHARE_BLE400 -community/os/hal/include -community/os/hal/ports/NRF51/NRF51822 -community/os/hal/ports/STM32/LLD/DMA2Dv1 -community/os/hal/ports/STM32/LLD/FSMCv1 -community/os/hal/ports/STM32/LLD/LTDCv1 -community/os/hal/ports/STM32/LLD/TIMv1 -community/os/hal/ports/TIVA/LLD -community/os/hal/ports/TIVA/TM4C123x -community/os/hal/ports/TIVA/TM4C129x -community/os/various -community/os/various/devices_lib/lcd -community/os/various/devices_lib/mems -community/os/various/devices_lib/others -community/os/various/devices_lib/rf -community/testhal/STM32/STM32F0xx/onewire -community/testhal/STM32/STM32F1xx/onewire -community/testhal/STM32/STM32F4xx/EICU -community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400 -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D -community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP -community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web -community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/NRF51822 -community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C123x -community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C129x -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1 -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x -community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x -community/testhal/STM32/STM32F4xx/EICU/community/os/various -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others -community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/NRF51822 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C123x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C129x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/NRF51/RT-WVSHARE_BLE400 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/STM32/RT-STM32F429-DISCOVERY-DMA2D/res -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/NRF51822 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C123x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/common/ports/ARMCMx/devices/TM4C129x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/ST_STM32F0308_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/boards/WVSHARE_BLE400 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/NRF51/NRF51822 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/DMA2Dv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/FSMCv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/LTDCv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/STM32/LLD/TIMv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/LLD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C123x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/hal/ports/TIVA/TM4C129x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/lcd -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/mems -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/others -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/os/various/devices_lib/rf -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F0xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F1xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/K20x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/KL2x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F0xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F3xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F4xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L0xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/IAR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/RVCT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/K20x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/KL2x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F0xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F3xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F4xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L0xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/nil/templates -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/include -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/IAR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/RVCT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32 -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_NAND -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SDRAM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/FSMC_SRAM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/STM32/STM32F4xx/onewire -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/EXT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/GPT -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/I2C -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/PWM -community/testhal/STM32/STM32F4xx/EICU/community/testhal/TIVA/TM4C123x/SPI -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARM/devices/LPC214x -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/K20x -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/KL2x -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F0xx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F1xx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F3xx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32F4xx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L0xx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/ARMCMx/devices/STM32L1xx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560BCxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Bxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Dxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC560Pxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC563Mxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC564Axx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ECxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC56ELxx -community/testhal/STM32/STM32F4xx/EICU/os/common/ports/e200/devices/SPC57EMxx_HSM -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/include -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/KINETIS -community/testhal/STM32/STM32F4xx/EICU/os/ext/CMSIS/ST -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ARDUINO_MEGA -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_11C24 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1114 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_11U14 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_BB_1343 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/EA_LPCXPRESSO_LPC812 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_K20D50M -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/FREESCALE_FREEDOM_KL25Z -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MAPLEMINI_STM32_F103 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/MCHCK_K20 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NGX_BB_LPC11U14 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_CAN -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_AVR_MT_128 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1227 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P1343 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_LPC_P2148 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_MSP430_P1611 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_EX256 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_SAM7_P256 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_103STK -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_E407_REV_D -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H103 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_H407 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_LCD -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P103 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P107 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/OLIMEX_STM32_P407 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/PJRC_TEENSY_3 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/RAISONANCE_REVA_STM8S -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/simulator -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560B -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560BC -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560D -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC560P -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC563M -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC564A -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EC -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_EVB_SPC56EL -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_INEMO_M1_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F030R8 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F103RB -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F302R8 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F334R8 -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F401RE -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_F411RE -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_NUCLEO_L152RE -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210C_EVAL -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3210E_EVAL -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM3220G_EVAL -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32373C_EVAL -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F072B_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F0_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F3_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F401C_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F429I_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32F4_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32L_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM32VL_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8L_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/ST_STM8S_DISCOVERY -community/testhal/STM32/STM32F4xx/EICU/os/hal/boards/STUDIEL_AT91SAM7A3_EK -community/testhal/STM32/STM32F4xx/EICU/os/hal/include -community/testhal/STM32/STM32F4xx/EICU/os/hal/lib/streams -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/nil -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/os-less/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/os/hal/osal/rt -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/common/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/K20x -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/KL2x -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/KINETIS/LLD -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/LPC/LPC214x -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/simulator/win32 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DACv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/DMAv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/GPIOv2 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/I2Cv2 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/OTGv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/RTCv2 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/SPIv2 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/TIMv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USARTv2 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/LLD/USBv1 -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F0xx -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F1xx -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F37x -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F3xx -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32F4xx -community/testhal/STM32/STM32F4xx/EICU/os/hal/ports/STM32/STM32L1xx -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates -community/testhal/STM32/STM32F4xx/EICU/os/hal/templates/osal -community/testhal/STM32/STM32F4xx/EICU/os/nil/include -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/ARMCMx/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/AVR/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200 -community/testhal/STM32/STM32F4xx/EICU/os/nil/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/nil/templates -community/testhal/STM32/STM32F4xx/EICU/os/rt/include -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARM/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/cmsis_os -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/IAR -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/ARMCMx/compilers/RVCT -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/AVR/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200 -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/e200/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32 -community/testhal/STM32/STM32F4xx/EICU/os/rt/ports/SIMIA32/compilers/GCC -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates -community/testhal/STM32/STM32F4xx/EICU/os/rt/templates/meta -community/testhal/STM32/STM32F4xx/EICU/os/various -community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/accel -community/testhal/STM32/STM32F4xx/EICU/os/various/devices_lib/lcd -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings -community/testhal/STM32/STM32F4xx/EICU/os/various/lwip_bindings/arch -community/testhal/STM32/STM32F4xx/FSMC_NAND -community/testhal/STM32/STM32F4xx/FSMC_SDRAM -community/testhal/STM32/STM32F4xx/FSMC_SRAM -community/testhal/STM32/STM32F4xx/onewire -community/testhal/TIVA/TM4C123x/EXT -community/testhal/TIVA/TM4C123x/GPT -community/testhal/TIVA/TM4C123x/I2C -community/testhal/TIVA/TM4C123x/PWM -community/testhal/TIVA/TM4C123x/SPI -os/common/ports/ARM/devices/LPC214x -os/common/ports/ARMCMx/devices/K20x -os/common/ports/ARMCMx/devices/KL2x -os/common/ports/ARMCMx/devices/STM32F0xx -os/common/ports/ARMCMx/devices/STM32F1xx -os/common/ports/ARMCMx/devices/STM32F3xx -os/common/ports/ARMCMx/devices/STM32F4xx -os/common/ports/ARMCMx/devices/STM32L0xx -os/common/ports/ARMCMx/devices/STM32L1xx -os/common/ports/e200/compilers/GCC -os/common/ports/e200/devices/SPC560BCxx -os/common/ports/e200/devices/SPC560Bxx -os/common/ports/e200/devices/SPC560Dxx -os/common/ports/e200/devices/SPC560Pxx -os/common/ports/e200/devices/SPC563Mxx -os/common/ports/e200/devices/SPC564Axx -os/common/ports/e200/devices/SPC56ECxx -os/common/ports/e200/devices/SPC56ELxx -os/common/ports/e200/devices/SPC57EMxx_HSM -os/ext/CMSIS/include -os/ext/CMSIS/KINETIS -os/ext/CMSIS/ST -os/hal/boards/ARDUINO_MEGA -os/hal/boards/EA_LPCXPRESSO_11C24 -os/hal/boards/EA_LPCXPRESSO_BB_1114 -os/hal/boards/EA_LPCXPRESSO_BB_11U14 -os/hal/boards/EA_LPCXPRESSO_BB_1343 -os/hal/boards/EA_LPCXPRESSO_LPC812 -os/hal/boards/FREESCALE_FREEDOM_K20D50M -os/hal/boards/FREESCALE_FREEDOM_KL25Z -os/hal/boards/MAPLEMINI_STM32_F103 -os/hal/boards/MCHCK_K20 -os/hal/boards/NGX_BB_LPC11U14 -os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1 -os/hal/boards/OLIMEX_AVR_CAN -os/hal/boards/OLIMEX_AVR_MT_128 -os/hal/boards/OLIMEX_LPC_P1227 -os/hal/boards/OLIMEX_LPC_P1343 -os/hal/boards/OLIMEX_LPC_P2148 -os/hal/boards/OLIMEX_MSP430_P1611 -os/hal/boards/OLIMEX_SAM7_EX256 -os/hal/boards/OLIMEX_SAM7_P256 -os/hal/boards/OLIMEX_STM32_103STK -os/hal/boards/OLIMEX_STM32_E407 -os/hal/boards/OLIMEX_STM32_E407_REV_D -os/hal/boards/OLIMEX_STM32_H103 -os/hal/boards/OLIMEX_STM32_H407 -os/hal/boards/OLIMEX_STM32_LCD -os/hal/boards/OLIMEX_STM32_P103 -os/hal/boards/OLIMEX_STM32_P107 -os/hal/boards/OLIMEX_STM32_P407 -os/hal/boards/PJRC_TEENSY_3 -os/hal/boards/RAISONANCE_REVA_STM8S -os/hal/boards/simulator -os/hal/boards/ST_EVB_SPC560B -os/hal/boards/ST_EVB_SPC560BC -os/hal/boards/ST_EVB_SPC560D -os/hal/boards/ST_EVB_SPC560P -os/hal/boards/ST_EVB_SPC563M -os/hal/boards/ST_EVB_SPC564A -os/hal/boards/ST_EVB_SPC56EC -os/hal/boards/ST_EVB_SPC56EL -os/hal/boards/ST_INEMO_M1_DISCOVERY -os/hal/boards/ST_NUCLEO_F030R8 -os/hal/boards/ST_NUCLEO_F103RB -os/hal/boards/ST_NUCLEO_F302R8 -os/hal/boards/ST_NUCLEO_F334R8 -os/hal/boards/ST_NUCLEO_F401RE -os/hal/boards/ST_NUCLEO_F411RE -os/hal/boards/ST_NUCLEO_L152RE -os/hal/boards/ST_STM3210C_EVAL -os/hal/boards/ST_STM3210E_EVAL -os/hal/boards/ST_STM3220G_EVAL -os/hal/boards/ST_STM32373C_EVAL -os/hal/boards/ST_STM32F072B_DISCOVERY -os/hal/boards/ST_STM32F0_DISCOVERY -os/hal/boards/ST_STM32F3_DISCOVERY -os/hal/boards/ST_STM32F401C_DISCOVERY -os/hal/boards/ST_STM32F429I_DISCOVERY -os/hal/boards/ST_STM32F4_DISCOVERY -os/hal/boards/ST_STM32L_DISCOVERY -os/hal/boards/ST_STM32VL_DISCOVERY -os/hal/boards/ST_STM8L_DISCOVERY -os/hal/boards/ST_STM8S_DISCOVERY -os/hal/boards/STUDIEL_AT91SAM7A3_EK -os/hal/include -os/hal/lib/streams -os/hal/osal/nil -os/hal/osal/os-less/ARMCMx -os/hal/osal/rt -os/hal/ports/AVR -os/hal/ports/common/ARMCMx -os/hal/ports/KINETIS/K20x -os/hal/ports/KINETIS/KL2x -os/hal/ports/KINETIS/LLD -os/hal/ports/LPC/LPC214x -os/hal/ports/simulator -os/hal/ports/simulator/win32 -os/hal/ports/STM32/LLD -os/hal/ports/STM32/LLD/DACv1 -os/hal/ports/STM32/LLD/DMAv1 -os/hal/ports/STM32/LLD/GPIOv1 -os/hal/ports/STM32/LLD/GPIOv2 -os/hal/ports/STM32/LLD/I2Cv1 -os/hal/ports/STM32/LLD/I2Cv2 -os/hal/ports/STM32/LLD/OTGv1 -os/hal/ports/STM32/LLD/RTCv1 -os/hal/ports/STM32/LLD/RTCv2 -os/hal/ports/STM32/LLD/SPIv1 -os/hal/ports/STM32/LLD/SPIv2 -os/hal/ports/STM32/LLD/TIMv1 -os/hal/ports/STM32/LLD/USARTv1 -os/hal/ports/STM32/LLD/USARTv2 -os/hal/ports/STM32/LLD/USBv1 -os/hal/ports/STM32/STM32F0xx -os/hal/ports/STM32/STM32F1xx -os/hal/ports/STM32/STM32F37x -os/hal/ports/STM32/STM32F3xx -os/hal/ports/STM32/STM32F4xx -os/hal/ports/STM32/STM32L1xx -os/hal/templates -os/hal/templates/osal -os/nil/include -os/nil/ports/ARMCMx -os/nil/ports/ARMCMx/compilers/GCC -os/nil/ports/AVR -os/nil/ports/AVR/compilers/GCC -os/nil/ports/e200 -os/nil/ports/e200/compilers/GCC -os/nil/templates -os/rt/include -os/rt/ports/ARM -os/rt/ports/ARM/compilers/GCC -os/rt/ports/ARMCMx -os/rt/ports/ARMCMx/cmsis_os -os/rt/ports/ARMCMx/compilers/GCC -os/rt/ports/ARMCMx/compilers/IAR -os/rt/ports/ARMCMx/compilers/RVCT -os/rt/ports/AVR -os/rt/ports/AVR/compilers/GCC -os/rt/ports/e200 -os/rt/ports/e200/compilers/GCC -os/rt/ports/SIMIA32 -os/rt/ports/SIMIA32/compilers/GCC -os/rt/templates -os/rt/templates/meta -os/various -os/various/devices_lib/accel -os/various/devices_lib/lcd -os/various/lwip_bindings -os/various/lwip_bindings/arch diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/Makefile deleted file mode 100644 index db59af2..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/Makefile +++ /dev/null @@ -1,217 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/chconf.h deleted file mode 100644 index ad6b53a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf.h deleted file mode 100644 index 93cc713..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h deleted file mode 100644 index e967c6a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/halconf_community.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU TRUE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM FALSE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/main.c deleted file mode 100644 index 90f8eb1..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/main.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * Make following connections on your discovery board: - * PD13-PB4 - * PD12-PB5 - * PD14-PB0 - * PD15-PB1 - */ - -#include "ch.h" -#include "hal.h" -#include "stdlib.h" - -typedef struct { - systime_t high; - systime_t low; - uint32_t pad; -} pulse_t; - -/* - * Chose values suitable for measurement using 16-bit timer on 1MHz - */ -static pulse_t pulse_led3 = {MS2ST(2), MS2ST(59), GPIOD_LED3}; -static pulse_t pulse_led4 = {MS2ST(3), MS2ST(53), GPIOD_LED4}; -static pulse_t pulse_led5 = {MS2ST(5), MS2ST(47), GPIOD_LED5}; -static pulse_t pulse_led6 = {MS2ST(7), MS2ST(43), GPIOD_LED6}; - -/* - * - */ -static THD_WORKING_AREA(PulseThreadWA_LED3, 128); -static THD_WORKING_AREA(PulseThreadWA_LED4, 128); -static THD_WORKING_AREA(PulseThreadWA_LED5, 128); -static THD_WORKING_AREA(PulseThreadWA_LED6, 128); - -static THD_FUNCTION(PulseThread, arg) { - chRegSetThreadName("Pulse"); - pulse_t *pulse = arg; - - systime_t t = chVTGetSystemTimeX(); - - while (!chThdShouldTerminateX()) { - t += pulse->high; - palSetPad(GPIOD, pulse->pad); - chThdSleepUntil(t); - palClearPad(GPIOD, pulse->pad); - t+= pulse->low; - chThdSleepUntil(t); - } - - chThdExit(MSG_OK); -} - -static const int32_t tolerance = 20; // uS -void eicu_cb(EICUDriver *eicup, eicuchannel_t channel, uint32_t w, uint32_t p) { - (void)eicup; - (void)p; - switch (channel) { - case EICU_CHANNEL_1: - if (abs((int32_t)w - (int32_t)ST2US(pulse_led3.high)) > tolerance) - osalSysHalt("ch1"); - break; - case EICU_CHANNEL_2: - if (abs((int32_t)w - (int32_t)ST2US(pulse_led4.high)) > tolerance) - osalSysHalt("ch2"); - break; - case EICU_CHANNEL_3: - if (abs((int32_t)w - (int32_t)ST2US(pulse_led5.high)) > tolerance) - osalSysHalt("ch3"); - break; - case EICU_CHANNEL_4: - if (abs((int32_t)w - (int32_t)ST2US(pulse_led6.high)) > tolerance) - osalSysHalt("ch4"); - break; - default: - osalSysHalt("unhandled case"); - break; - } -} - -static const EICUChannelConfig led3cfg = { - EICU_INPUT_ACTIVE_HIGH, - EICU_INPUT_PULSE, - eicu_cb -}; - -static const EICUConfig eicucfg = { - 1000000, /* EICU clock frequency in Hz.*/ - { - &led3cfg, - &led3cfg, - &led3cfg, - &led3cfg - }, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPadMode(GPIOB, GPIOB_PIN0, PAL_MODE_ALTERNATE(2)); - palSetPadMode(GPIOB, GPIOB_PIN1, PAL_MODE_ALTERNATE(2)); - palSetPadMode(GPIOB, GPIOB_PIN4, PAL_MODE_ALTERNATE(2)); - palSetPadMode(GPIOB, GPIOB_PIN5, PAL_MODE_ALTERNATE(2)); - - eicuStart(&EICUD3, &eicucfg); - eicuEnable(&EICUD3); - - osalThreadSleepMicroseconds(10); // need to stabilize input puns - - chThdCreateStatic(PulseThreadWA_LED3, sizeof(PulseThreadWA_LED3), - NORMALPRIO+1, PulseThread, &pulse_led3); - chThdCreateStatic(PulseThreadWA_LED4, sizeof(PulseThreadWA_LED4), - NORMALPRIO+1, PulseThread, &pulse_led4); - chThdCreateStatic(PulseThreadWA_LED5, sizeof(PulseThreadWA_LED5), - NORMALPRIO+1, PulseThread, &pulse_led5); - chThdCreateStatic(PulseThreadWA_LED6, sizeof(PulseThreadWA_LED6), - NORMALPRIO+1, PulseThread, &pulse_led6); - - while (true) { - osalThreadSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h deleted file mode 100644 index c7671b7..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h deleted file mode 100644 index 9d15f32..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC PC card driver system settings. - */ -#define STM32_USE_FSMC_PCCARD FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE - -/* - * EICU driver system settings. - */ -#define STM32_EICU_USE_TIM1 FALSE -#define STM32_EICU_USE_TIM2 FALSE -#define STM32_EICU_USE_TIM3 TRUE -#define STM32_EICU_USE_TIM4 FALSE -#define STM32_EICU_USE_TIM5 FALSE -#define STM32_EICU_USE_TIM8 FALSE -#define STM32_EICU_USE_TIM9 FALSE -#define STM32_EICU_USE_TIM10 FALSE -#define STM32_EICU_USE_TIM11 FALSE -#define STM32_EICU_USE_TIM12 FALSE -#define STM32_EICU_USE_TIM13 FALSE -#define STM32_EICU_USE_TIM14 FALSE -#define STM32_EICU_TIM1_IRQ_PRIORITY 7 -#define STM32_EICU_TIM2_IRQ_PRIORITY 7 -#define STM32_EICU_TIM3_IRQ_PRIORITY 7 -#define STM32_EICU_TIM4_IRQ_PRIORITY 7 -#define STM32_EICU_TIM5_IRQ_PRIORITY 7 -#define STM32_EICU_TIM8_IRQ_PRIORITY 7 -#define STM32_EICU_TIM9_IRQ_PRIORITY 7 -#define STM32_EICU_TIM10_IRQ_PRIORITY 7 -#define STM32_EICU_TIM11_IRQ_PRIORITY 7 -#define STM32_EICU_TIM12_IRQ_PRIORITY 7 -#define STM32_EICU_TIM13_IRQ_PRIORITY 7 -#define STM32_EICU_TIM14_IRQ_PRIORITY 7 - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/readme.txt deleted file mode 100644 index 2f45f99..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/EICU/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - 1-Wire driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx 1-Wire driver. - -** Board Setup ** - -To use demo you have to power your 1-wire device from 5V bus on board -and connect DQ line to PB0 pin. Do not forget about external pullup -resistor to 5V (4k7 recommended). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.cproject deleted file mode 100644 index d5451e0..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.project deleted file mode 100644 index 9dd1295..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/.project +++ /dev/null @@ -1,39 +0,0 @@ - - - STM32F4xx-FSMC_NAND - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile deleted file mode 100644 index 6ad8126..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(CHIBIOS_CONTRIB)/os/various/bitmap.c \ - dma_storm_adc.c \ - dma_storm_spi.c \ - dma_storm_uart.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h deleted file mode 100644 index 1065821..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h deleted file mode 100644 index 79dc76d..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef DMA_STORM_H_ -#define DMA_STORM_H_ - -#ifdef __cplusplus -extern "C" { -#endif - void dma_storm_spi_start(void); - uint32_t dma_storm_spi_stop(void); - void dma_storm_adc_start(void); - uint32_t dma_storm_adc_stop(void); - void dma_storm_uart_start(void); - uint32_t dma_storm_uart_stop(void); -#ifdef __cplusplus -} -#endif - -#endif /* DMA_STORM_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c deleted file mode 100644 index 2c2e1db..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_adc.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_NUM_CHANNELS 6 -#define ADC_BUF_DEPTH 8 - -/* human readable names */ -#define ADC_CURRENT_SENS ADC_CHANNEL_IN10 -#define ADC_MAIN_SUPPLY ADC_CHANNEL_IN11 -#define ADC_6V_SUPPLY ADC_CHANNEL_IN12 -#define ADC_AN33_0 ADC_CHANNEL_IN13 -#define ADC_AN33_1 ADC_CHANNEL_IN14 -#define ADC_AN33_2 ADC_CHANNEL_IN15 - -#define ADC_CURRENT_SENS_OFFSET (ADC_CHANNEL_IN10 - 10) -#define ADC_MAIN_VOLTAGE_OFFSET (ADC_CHANNEL_IN11 - 10) -#define ADC_6V_OFFSET (ADC_CHANNEL_IN12 - 10) -#define ADC_AN33_0_OFFSET (ADC_CHANNEL_IN13 - 10) -#define ADC_AN33_1_OFFSET (ADC_CHANNEL_IN14 - 10) -#define ADC_AN33_2_OFFSET (ADC_CHANNEL_IN15 - 10) - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err); -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n); - -static adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH]; - -static uint32_t ints = 0; -static uint32_t errors = 0; - -static const ADCConversionGroup adccg = { - TRUE, - ADC_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN10(ADC_SAMPLE_3) | - ADC_SMPR1_SMP_AN11(ADC_SAMPLE_3) | - ADC_SMPR1_SMP_AN12(ADC_SAMPLE_3) | - ADC_SMPR1_SMP_AN13(ADC_SAMPLE_3) | - ADC_SMPR1_SMP_AN14(ADC_SAMPLE_3) | - ADC_SMPR1_SMP_AN15(ADC_SAMPLE_3), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS), - 0, - ADC_SQR3_SQ6_N(ADC_AN33_2) | - ADC_SQR3_SQ5_N(ADC_AN33_1) | - ADC_SQR3_SQ4_N(ADC_AN33_0) | - ADC_SQR3_SQ3_N(ADC_6V_SUPPLY) | - ADC_SQR3_SQ2_N(ADC_MAIN_SUPPLY) | - ADC_SQR3_SQ1_N(ADC_CURRENT_SENS) -}; - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - (void)adcp; - (void)err; - - osalSysHalt(""); -} - -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - (void)adcp; - (void)buffer; - (void)n; - ints++; -} - -/* - * - */ -void dma_storm_adc_start(void){ - ints = 0; - errors = 0; - - /* Activates the ADC1 driver and the temperature sensor.*/ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* Starts an ADC continuous conversion.*/ - adcStartConversion(&ADCD1, &adccg, samples, ADC_BUF_DEPTH); -} - -/* - * - */ -uint32_t dma_storm_adc_stop(void){ - adcStopConversion(&ADCD1); - adcSTM32DisableTSVREFE(); - adcStop(&ADCD1); - return ints; -} - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c deleted file mode 100644 index e36fbc9..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ -#define SPI_BUF_SIZE 512 - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ -static void spi_end_cb(SPIDriver *spip); - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ -static uint8_t testbuf_ram[SPI_BUF_SIZE]; -static const uint8_t testbuf_flash[SPI_BUF_SIZE]; - -/* - * - */ -static const SPIConfig spicfg = { - spi_end_cb, - GPIOA, - GPIOA_SPI1_NSS, - 0, //SPI_CR1_BR_1 | SPI_CR1_BR_0 -}; - -static uint32_t ints; -static binary_semaphore_t sem; -static bool stop = false; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -static void spi_end_cb(SPIDriver *spip){ - ints++; - - if (stop){ - chSysLockFromISR(); - chBSemSignalI(&sem); - chSysUnlockFromISR(); - return; - } - else{ - chSysLockFromISR(); - spiStartExchangeI(spip, SPI_BUF_SIZE, testbuf_flash, testbuf_ram); - chSysUnlockFromISR(); - } -} - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -void dma_storm_spi_start(void){ - ints = 0; - stop = false; - chBSemObjectInit(&sem, true); - spiStart(&SPID1, &spicfg); - spiStartExchange(&SPID1, SPI_BUF_SIZE, testbuf_flash, testbuf_ram); -} - -uint32_t dma_storm_spi_stop(void){ - stop = true; - chBSemWait(&sem); - spiStop(&SPID1); - return ints; -} - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c deleted file mode 100644 index 7b8aa02..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_uart.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ -#define UART_STORM_BAUDRATE 3000000 -#define STORM_BUF_LEN 256 - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ -static void txend1(UARTDriver *uartp); -static void txend2(UARTDriver *uartp); -static void rxerr(UARTDriver *uartp, uartflags_t e); -static void rxchar(UARTDriver *uartp, uint16_t c); -static void rxend(UARTDriver *uartp); - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ -static uint8_t rxbuf[STORM_BUF_LEN]; -static uint8_t txbuf[STORM_BUF_LEN]; - -/* - * UART driver configuration structure. - */ -static const UARTConfig uart_cfg = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - UART_STORM_BAUDRATE, - 0, - 0, - 0 -}; - -static uint32_t ints; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - ints++; - chSysLockFromISR(); - uartStartSendI(uartp, STORM_BUF_LEN, txbuf); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - (void)uartp; - - chSysLockFromISR(); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - (void)uartp; - (void)e; - osalSysHalt(""); -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - (void)uartp; - (void)c; -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - (void)uartp; - - chSysLockFromISR(); - uartStartReceiveI(&UARTD6, STORM_BUF_LEN, rxbuf); - chSysUnlockFromISR(); -} - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void dma_storm_uart_start(void){ - - uint32_t i; - - for (i=0; ipages_per_block; page++){ - nandReadPageData(dp, block, page, nand_buf, NAND.config->page_data_size, NULL); - nandReadPageSpare(dp, block, page, &nand_buf[2048], NAND.config->page_spare_size); - for (i=0; iconfig->pages_per_block; page++){ - memset(nand_buf, 0, NAND_PAGE_SIZE); - op_status = nandWritePageWhole(nandp, block, page, nand_buf, NAND_PAGE_SIZE); - if (0 != (op_status & 1)){ - nandReadPageWhole(nandp, block, page, nand_buf, NAND_PAGE_SIZE); - for (i=0; i>= shift; - ecc2 <<= shift; - ecc2 >>= shift; - e = ecc1 ^ ecc2; - - if (0 == e){ - return ECC_NO_ERROR; - } - else if (((e - 1) & e) == 0){ - return ECC_CORRUPTED; - } - else { - for (i=0; i>= 1; - b1 = e & 1; - e >>= 1; - if ((b0 + b1) != 1) - return ECC_UNCORRECTABLE_ERROR; - corr |= b1 << i; - } - *corrupted = corr; - return ECC_CORRECTABLE_ERROR; - } -} - -/* - * - */ -static void invert_bit(uint8_t *buf, uint32_t byte, uint32_t bit){ - osalDbgCheck((byte < NAND_PAGE_DATA_SIZE) && (bit < 8)); - buf[byte] ^= ((uint8_t)1) << bit; -} - -/* - * - */ -static void ecc_test(NANDDriver *nandp, uint32_t block){ - - uint32_t corrupted; - uint32_t byte, bit; - const uint32_t ecclen = 28; - uint32_t ecc_ref, ecc_broken; - uint8_t op_status; - ecc_result_t ecc_result = ECC_NO_ERROR; - - /* This test requires good block.*/ - osalDbgCheck(!nandIsBad(nandp, block)); - if (!is_erased(nandp, block)) - nandErase(&NAND, block); - - pattern_fill(); - - /*** Correctable errors ***/ - op_status = nandWritePageData(nandp, block, 0, - nand_buf, nandp->config->page_data_size, &ecc_ref); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - nandReadPageData(nandp, block, 0, - nand_buf, nandp->config->page_data_size, &ecc_broken); - ecc_result = parse_ecc(ecclen, ecc_ref, ecc_broken, &corrupted); - osalDbgCheck(ECC_NO_ERROR == ecc_result); /* unexpected error */ - - /**/ - byte = 0; - bit = 7; - invert_bit(nand_buf, byte, bit); - op_status = nandWritePageData(nandp, block, 1, - nand_buf, nandp->config->page_data_size, &ecc_broken); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - invert_bit(nand_buf, byte, bit); - ecc_result = parse_ecc(ecclen, ecc_ref, ecc_broken, &corrupted); - osalDbgCheck(ECC_CORRECTABLE_ERROR == ecc_result); /* this error must be correctable */ - osalDbgCheck(corrupted == (byte * 8 + bit)); /* wrong correction code */ - - /**/ - byte = 2047; - bit = 0; - invert_bit(nand_buf, byte, bit); - op_status = nandWritePageData(nandp, block, 2, - nand_buf, nandp->config->page_data_size, &ecc_broken); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - invert_bit(nand_buf, byte, bit); - ecc_result = parse_ecc(ecclen, ecc_ref, ecc_broken, &corrupted); - osalDbgCheck(ECC_CORRECTABLE_ERROR == ecc_result); /* this error must be correctable */ - osalDbgCheck(corrupted == (byte * 8 + bit)); /* wrong correction code */ - - /**/ - byte = 1027; - bit = 3; - invert_bit(nand_buf, byte, bit); - op_status = nandWritePageData(nandp, block, 3, - nand_buf, nandp->config->page_data_size, &ecc_broken); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - invert_bit(nand_buf, byte, bit); - ecc_result = parse_ecc(ecclen, ecc_ref, ecc_broken, &corrupted); - osalDbgCheck(ECC_CORRECTABLE_ERROR == ecc_result); /* this error must be correctable */ - osalDbgCheck(corrupted == (byte * 8 + bit)); /* wrong correction code */ - - /*** Uncorrectable error ***/ - byte = 1027; - invert_bit(nand_buf, byte, 3); - invert_bit(nand_buf, byte, 4); - op_status = nandWritePageData(nandp, block, 4, - nand_buf, nandp->config->page_data_size, &ecc_broken); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - invert_bit(nand_buf, byte, 3); - invert_bit(nand_buf, byte, 4); - ecc_result = parse_ecc(28, ecc_ref, ecc_broken, &corrupted); - osalDbgCheck(ECC_UNCORRECTABLE_ERROR == ecc_result); /* This error must be NOT correctable */ - - /*** make clean ***/ - nandErase(&NAND, block); -} - -/* - * - */ -static void general_test (NANDDriver *nandp, size_t first, - size_t last, size_t read_rounds){ - - size_t block, page, round; - bool status; - uint8_t op_status; - uint32_t recc, wecc; - - red_led_on(); - - /* initialize time measurement units */ - chTMObjectInit(&tmu_erase); - chTMObjectInit(&tmu_write_data); - chTMObjectInit(&tmu_write_spare); - chTMObjectInit(&tmu_read_data); - chTMObjectInit(&tmu_read_spare); - - /* perform basic checks */ - for (block=first; blockconfig->pages_per_block; page++){ - pattern_fill(); - - chTMStartMeasurementX(&tmu_write_data); - op_status = nandWritePageData(nandp, block, page, - nand_buf, nandp->config->page_data_size, &wecc); - chTMStopMeasurementX(&tmu_write_data); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - - chTMStartMeasurementX(&tmu_write_spare); - op_status = nandWritePageSpare(nandp, block, page, - nand_buf + nandp->config->page_data_size, - nandp->config->page_spare_size); - chTMStopMeasurementX(&tmu_write_spare); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - - /* read back and compare */ - for (round=0; roundconfig->page_data_size, &recc); - chTMStopMeasurementX(&tmu_read_data); - osalDbgCheck(0 == (recc ^ wecc)); /* ECC error detected */ - - chTMStartMeasurementX(&tmu_read_spare); - nandReadPageSpare(nandp, block, page, - nand_buf + nandp->config->page_data_size, - nandp->config->page_spare_size); - chTMStopMeasurementX(&tmu_read_spare); - - osalDbgCheck(0 == memcmp(ref_buf, nand_buf, NAND_PAGE_SIZE)); /* Read back failed */ - } - } - - /* make clean */ - chTMStartMeasurementX(&tmu_erase); - op_status = nandErase(nandp, block); - chTMStopMeasurementX(&tmu_erase); - osalDbgCheck(0 == (op_status & 1)); /* operation failed */ - - status = is_erased(nandp, block); - osalDbgCheck(true == status); /* blocks was not erased successfully */ - }/* if (!nandIsBad(nandp, block)){ */ - } - red_led_off(); -} - - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/* - * Application entry point. - */ -int main(void) { - - /* performance counters */ - int32_t adc_ints = 0; - int32_t spi_ints = 0; - int32_t uart_ints = 0; - int32_t adc_idle_ints = 0; - int32_t spi_idle_ints = 0; - int32_t uart_idle_ints = 0; - uint32_t background_cnt = 0; - systime_t T = 0; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - -#if STM32_NAND_USE_EXT_INT - extStart(&EXTD1, &extcfg); -#endif - chTMObjectInit(&tmu_driver_start); - chTMStartMeasurementX(&tmu_driver_start); -#if USE_BAD_MAP - nandStart(&NAND, &nandcfg, &badblock_map); -#else - nandStart(&NAND, &nandcfg, NULL); -#endif - chTMStopMeasurementX(&tmu_driver_start); - - chThdSleepMilliseconds(4000); - - chThdCreateStatic(BackgroundThreadWA, - sizeof(BackgroundThreadWA), - NORMALPRIO - 20, - BackgroundThread, - NULL); - - nand_wp_release(); - - /* - * run NAND test in parallel with DMA load and background thread - */ - dma_storm_adc_start(); - dma_storm_uart_start(); - dma_storm_spi_start(); - T = chVTGetSystemTimeX(); - general_test(&NAND, NAND_TEST_START_BLOCK, NAND_TEST_END_BLOCK, 1); - T = chVTGetSystemTimeX() - T; - adc_ints = dma_storm_adc_stop(); - uart_ints = dma_storm_uart_stop(); - spi_ints = dma_storm_spi_stop(); - chSysLock(); - background_cnt = BackgroundThdCnt; - BackgroundThdCnt = 0; - chSysUnlock(); - - /* - * run DMA load and background thread _without_ NAND test - */ - dma_storm_adc_start(); - dma_storm_uart_start(); - dma_storm_spi_start(); - chThdSleep(T); - adc_idle_ints = dma_storm_adc_stop(); - uart_idle_ints = dma_storm_uart_stop(); - spi_idle_ints = dma_storm_spi_stop(); - - /* - * ensure that NAND code have negligible impact on other subsystems - */ - osalDbgCheck(background_cnt > (BackgroundThdCnt / 4)); - osalDbgCheck(abs(adc_ints - adc_idle_ints) < (adc_idle_ints / 20)); - osalDbgCheck(abs(uart_ints - uart_idle_ints) < (uart_idle_ints / 20)); - osalDbgCheck(abs(spi_ints - spi_idle_ints) < (spi_idle_ints / 10)); - - /* - * perform ECC calculation test - */ - ecc_test(&NAND, NAND_TEST_END_BLOCK); - -#if USE_KILL_BLOCK_TEST - kill_block(&NAND, NAND_TEST_KILL_BLOCK); -#endif - - nand_wp_assert(); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - } -} - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h deleted file mode 100644 index d2333ba..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 12 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 3 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 TRUE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 6 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 2 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h deleted file mode 100644 index 9638dbe..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 TRUE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 -#define STM32_FSMC_DMA_CHN 0x03010201 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 TRUE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC PC card driver system settings. - */ -#define STM32_USE_FSMC_PCCARD FALSE diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.cproject deleted file mode 100644 index eb50c83..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.project deleted file mode 100644 index 5f87dc8..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/.project +++ /dev/null @@ -1,39 +0,0 @@ - - - STM32F4xx-FSMC_SDRAM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile deleted file mode 100644 index c786de6..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile +++ /dev/null @@ -1,224 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -std=c++11 -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F429I_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/os/various/cpp_wrappers/chcpp.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F429xI.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c \ - memcpy_dma.c \ - membench.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = $(CHCPPSRC) \ - $(CHIBIOS_CONTRIB)/os/various/memtest.cpp - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various/cpp_wrappers \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h deleted file mode 100644 index 1065821..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h deleted file mode 100644 index e690d15..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h deleted file mode 100644 index 606fed4..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC TRUE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c deleted file mode 100644 index 1ec34d2..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/main.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2014 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Concepts and parts of this file have been contributed by Uladzimir Pylinsky - aka barthess. - */ - -#include "ch.h" -#include "hal.h" - -#include "string.h" - -#include "hal_fsmc_sdram.h" -#include "membench.h" -#include "memtest.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -/* - * FMC SDRAM Mode definition register defines - */ -#define FMC_SDCMR_MRD_BURST_LENGTH_1 ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_BURST_LENGTH_2 ((uint16_t)0x0001) -#define FMC_SDCMR_MRD_BURST_LENGTH_4 ((uint16_t)0x0002) -#define FMC_SDCMR_MRD_BURST_LENGTH_8 ((uint16_t)0x0004) -#define FMC_SDCMR_MRD_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) -#define FMC_SDCMR_MRD_CAS_LATENCY_2 ((uint16_t)0x0020) -#define FMC_SDCMR_MRD_CAS_LATENCY_3 ((uint16_t)0x0030) -#define FMC_SDCMR_MRD_OPERATING_MODE_STANDARD ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) -#define FMC_SDCMR_MRD_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) - -/* - * FMC_ReadPipe_Delay - */ -#define FMC_ReadPipe_Delay_0 ((uint32_t)0x00000000) -#define FMC_ReadPipe_Delay_1 ((uint32_t)0x00002000) -#define FMC_ReadPipe_Delay_2 ((uint32_t)0x00004000) -#define FMC_ReadPipe_Delay_Mask ((uint32_t)0x00006000) - -/* - * FMC_Read_Burst - */ -#define FMC_Read_Burst_Disable ((uint32_t)0x00000000) -#define FMC_Read_Burst_Enable ((uint32_t)0x00001000) -#define FMC_Read_Burst_Mask ((uint32_t)0x00001000) - -/* - * FMC_SDClock_Period - */ -#define FMC_SDClock_Disable ((uint32_t)0x00000000) -#define FMC_SDClock_Period_2 ((uint32_t)0x00000800) -#define FMC_SDClock_Period_3 ((uint32_t)0x00000C00) -#define FMC_SDClock_Period_Mask ((uint32_t)0x00000C00) - -/* - * FMC_ColumnBits_Number - */ -#define FMC_ColumnBits_Number_8b ((uint32_t)0x00000000) -#define FMC_ColumnBits_Number_9b ((uint32_t)0x00000001) -#define FMC_ColumnBits_Number_10b ((uint32_t)0x00000002) -#define FMC_ColumnBits_Number_11b ((uint32_t)0x00000003) - -/* - * FMC_RowBits_Number - */ -#define FMC_RowBits_Number_11b ((uint32_t)0x00000000) -#define FMC_RowBits_Number_12b ((uint32_t)0x00000004) -#define FMC_RowBits_Number_13b ((uint32_t)0x00000008) - -/* - * FMC_SDMemory_Data_Width - */ -#define FMC_SDMemory_Width_8b ((uint32_t)0x00000000) -#define FMC_SDMemory_Width_16b ((uint32_t)0x00000010) -#define FMC_SDMemory_Width_32b ((uint32_t)0x00000020) - -/* - * FMC_InternalBank_Number - */ -#define FMC_InternalBank_Number_2 ((uint32_t)0x00000000) -#define FMC_InternalBank_Number_4 ((uint32_t)0x00000040) - -/* - * FMC_CAS_Latency - */ -#define FMC_CAS_Latency_1 ((uint32_t)0x00000080) -#define FMC_CAS_Latency_2 ((uint32_t)0x00000100) -#define FMC_CAS_Latency_3 ((uint32_t)0x00000180) - -/* - * FMC_Write_Protection - */ -#define FMC_Write_Protection_Disable ((uint32_t)0x00000000) -#define FMC_Write_Protection_Enable ((uint32_t)0x00000200) - -#define SDRAM_SIZE (8 * 1024 * 1024) -#define SDRAM_START ((void *)FSMC_Bank6_MAP_BASE) - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -static void mem_error_cb(memtest_t *memp, testtype type, size_t index, - size_t width, uint32_t got, uint32_t expect); - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -/* - * SDRAM driver configuration structure. - */ -static const SDRAMConfig sdram_cfg = { - .sdcr = (uint32_t) FMC_ColumnBits_Number_9b | - FMC_RowBits_Number_13b | - FMC_SDMemory_Width_16b | - FMC_InternalBank_Number_4 | - FMC_CAS_Latency_3 | - FMC_Write_Protection_Disable | - FMC_SDClock_Period_3 | - FMC_Read_Burst_Enable | - FMC_ReadPipe_Delay_1, - .sdtr = (uint32_t) (2 - 1) | // FMC_LoadToActiveDelay = 2 (TMRD: 2 Clock cycles) - (7 << 4) | // FMC_ExitSelfRefreshDelay = 7 (TXSR: min=70ns (7x11.11ns)) - (4 << 8) | // FMC_SelfRefreshTime = 4 (TRAS: min=42ns (4x11.11ns) max=120k (ns)) - (7 << 12) | // FMC_RowCycleDelay = 7 (TRC: min=70 (7x11.11ns)) - (2 << 16) | // FMC_WriteRecoveryTime = 2 (TWR: min=1+ 7ns (1+1x11.11ns)) - (2 << 20) | // FMC_RPDelay = 2 (TRP: 20ns => 2x11.11ns) - (2 << 24), // FMC_RCDDelay = 2 (TRCD: 20ns => 2x11.11ns) - /* NRFS = 4-1*/ - .sdcmr = (3 << 5) | (FMC_SDCMR_MRD_BURST_LENGTH_2 | - FMC_SDCMR_MRD_BURST_TYPE_SEQUENTIAL | - FMC_SDCMR_MRD_CAS_LATENCY_3 | - FMC_SDCMR_MRD_OPERATING_MODE_STANDARD | - FMC_SDCMR_MRD_WRITEBURST_MODE_SINGLE) << 9, - - .sdrtr = (uint32_t)(683 << 1), -}; - -/* - * - */ -static uint8_t int_buf[64*1024]; - -/* - * - */ -static memtest_t memtest_struct = { - SDRAM_START, - SDRAM_SIZE, - MEMTEST_WIDTH_32, - mem_error_cb -}; - -/* - * - */ -static membench_t membench_ext = { - SDRAM_START, - SDRAM_SIZE, -}; - -/* - * - */ -static membench_t membench_int = { - int_buf, - sizeof(int_buf), -}; - -/* - * - */ -static membench_result_t membench_result_ext2int; -static membench_result_t membench_result_int2ext; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -static void mem_error_cb(memtest_t *memp, testtype type, size_t index, - size_t width, uint32_t got, uint32_t expect) { - (void)memp; - (void)type; - (void)index; - (void)width; - (void)got; - (void)expect; - - osalSysHalt("Memory broken"); -} - -/* - * - */ -static void memtest(void) { - - while (true) { - memtest_run(&memtest_struct, MEMTEST_RUN_ALL); - } -} - -/* - * - */ -static void membench(void) { - membench_run(&membench_ext, &membench_int, &membench_result_int2ext); - membench_run(&membench_int, &membench_ext, &membench_result_ext2int); -} - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - fsmcSdramInit(); - fsmcSdramStart(&SDRAMD, &sdram_cfg); - - membench(); - memtest(); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h deleted file mode 100644 index 4737002..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 3 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 TRUE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 6 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 2 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h deleted file mode 100644 index f60cbee..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 TRUE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM TRUE -#define STM32_SDRAM_USE_FSMC_SDRAM1 FALSE -#define STM32_SDRAM_USE_FSMC_SDRAM2 TRUE - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC PC card driver system settings. - */ -#define STM32_USE_FSMC_PCCARD FALSE diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c deleted file mode 100644 index 91b9aee..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#include "membench.h" -#include "memcpy_dma.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ -volatile int warning_suppressor; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ -/* - * Calculates memory access time in MiB/s. - */ -double speed_mibps(const time_measurement_t *tmu, size_t len) { - double size; // MiB - double time; // sec - - size = len; - size /= 1024 * 1024; - - time = tmu->last; - time /= STM32_SYSCLK; - - return size / time; -} - -/* - * Calculates memory access time in B/s. - */ -uint32_t speed_bps(const time_measurement_t *tmu, size_t len) { - - uint64_t tmp = len; - tmp *= STM32_SYSCLK; - - return tmp / tmu->last; -} - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/* - * - */ -void membench_run(membench_t *dest, const membench_t *src, - membench_result_t *result) { - time_measurement_t mem_tmu; - size_t len; - - if (src->size < dest->size) - len = src->size; - else - len = dest->size; - - /* memset */ - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - memset(dest->start, 0x55, dest->size); - chTMStopMeasurementX(&mem_tmu); - result->memset = speed_bps(&mem_tmu, dest->size); - - /* memcpy */ - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - memcpy(dest->start, src->start, len); - chTMStopMeasurementX(&mem_tmu); - result->memcpy = speed_bps(&mem_tmu, len); - - /* memcmp */ - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - warning_suppressor = memcmp(dest->start, src->start, len); - chTMStopMeasurementX(&mem_tmu); - result->memcmp = speed_bps(&mem_tmu, len); - - /* memcpy DMA */ - memcpy_dma_start(); - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - memcpy_dma(dest->start, src->start, len); - chTMStopMeasurementX(&mem_tmu); - result->memcpy_dma = speed_bps(&mem_tmu, len); - memcpy_dma_stop(); -} - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h deleted file mode 100644 index 1169145..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/membench.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MEMBENCH_H_ -#define MEMBENCH_H_ - -/* - * - */ -typedef struct { - void *start; - size_t size; -} membench_t; - -/* - * all values in B/s - */ -typedef struct { - uint32_t memset; - uint32_t memcpy; - uint32_t memcpy_dma; - uint32_t memcmp; -} membench_result_t; - -/* - * - */ -#ifdef __cplusplus -extern "C" { -#endif - void membench_run(membench_t *dest, const membench_t *src, membench_result_t *ret); -#ifdef __cplusplus -} -#endif - -#endif /* MEMBENCH_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c deleted file mode 100644 index 4961c7c..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#include "memcpy_dma.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ -#define STM32_MEMCPY_DMA_PRIORITY 0 -#define STM32_MEMCPY_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ -static memcpy_dma_engine_t engine; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ -/* - * - */ -void memcpy_dma_start(void) { - bool b; - - engine.dma = STM32_DMA_STREAM(STM32_MEMCPY_DMA_STREAM); - b = dmaStreamAllocate(engine.dma, STM32_MEMCPY_DMA_PRIORITY, NULL, NULL); - osalDbgAssert(!b, "stream already allocated"); -} - -/* - * - */ -void memcpy_dma_stop(void) { - dmaStreamRelease(engine.dma); -} - -/* - * - */ -void memcpy_dma(void *dest, const void *src, size_t size) { - - size_t words = size / 4; - size_t remainder = size % 4; - size_t max_block = 0xFFFF; /* DMA limitation */ - - uint32_t cr = STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD; - - while (words > max_block) { - dmaStartMemCopy(engine.dma, cr, src, dest, max_block) - dmaWaitCompletion(engine.dma); - words -= max_block; - } - - dmaStartMemCopy(engine.dma, cr, src, dest, words) - dmaWaitCompletion(engine.dma); - - if (remainder > 0) - memcpy(dest+size-remainder, src+size-remainder, remainder); -} - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h deleted file mode 100644 index 8d6212c..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SDRAM/memcpy_dma.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MEMCPY_DMA_H_ -#define MEMCPY_DMA_H_ - -/* - * - */ -typedef struct { - const stm32_dma_stream_t *dma; -} memcpy_dma_engine_t; - -/* - * - */ -#ifdef __cplusplus -extern "C" { -#endif - void memcpy_dma_start(void); - void memcpy_dma_stop(void); - void memcpy_dma(void *dest, const void *src, size_t size); -#ifdef __cplusplus -} -#endif - -#endif /* MEMCPY_DMA_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.cproject deleted file mode 100644 index 64d4678..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.project deleted file mode 100644 index 38b4c10..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/.project +++ /dev/null @@ -1,39 +0,0 @@ - - - STM32F4xx-FSMC_SRAM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile deleted file mode 100644 index c0db393..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile +++ /dev/null @@ -1,224 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -std=c++11 -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS2/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/os/various/cpp_wrappers/chcpp.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c \ - membench.c \ - memcpy_dma.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = $(CHCPPSRC) \ - $(CHIBIOS_CONTRIB)/os/various/memtest.cpp - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various/cpp_wrappers \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h deleted file mode 100644 index 1065821..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h deleted file mode 100644 index e690d15..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h deleted file mode 100644 index 606fed4..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC TRUE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c deleted file mode 100644 index c94bd73..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/main.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "hal_fsmc_sram.h" -#include "membench.h" -#include "memtest.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ -#define SRAM_SIZE (512 * 1024) -#define SRAM_START ((void *)FSMC_Bank1_4_MAP) - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -static void mem_error_cb(memtest_t *memp, testtype type, size_t index, - size_t width, uint32_t got, uint32_t expect); - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static size_t errors = 0; - -/* - * - */ -static uint8_t int_buf[64*1024]; - -/* - * SRAM driver configuration structure. - */ -static const SRAMConfig sram_cfg = { - .bcr = (FSMC_BCR_MWID_16 | FSMC_BCR_MTYP_SRAM | FSMC_BCR_WREN), - .btr = (0 << 16) | (2 << 8) | (1 << 0), - .bwtr = (0 << 16) | (2 << 8) | (1 << 0) -}; - -/* - * - */ -static memtest_t memtest_struct = { - SRAM_START, - SRAM_SIZE, - MEMTEST_WIDTH_32, - mem_error_cb -}; - -/* - * - */ -static membench_t membench_ext = { - SRAM_START, - SRAM_SIZE, -}; - -/* - * - */ -static membench_t membench_int = { - int_buf, - sizeof(int_buf), -}; - -/* - * - */ -static membench_result_t membench_result_ext2int; -static membench_result_t membench_result_int2ext; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -static inline void red_led_on(void) {palSetPad(GPIOI, GPIOI_LED_R);} -static inline void red_led_off(void) {palClearPad(GPIOI, GPIOI_LED_R);} -static inline void green_led_on(void) {palSetPad(GPIOI, GPIOI_LED_G);} -static inline void green_led_off(void) {palClearPad(GPIOI, GPIOI_LED_G);} -static inline void green_led_toggle(void) {palTogglePad(GPIOI, GPIOI_LED_G);} - -static void mem_error_cb(memtest_t *memp, testtype type, size_t index, - size_t width, uint32_t got, uint32_t expect) { - (void)memp; - (void)type; - (void)index; - (void)width; - (void)got; - (void)expect; - - green_led_off(); - red_led_on(); - osalThreadSleepMilliseconds(10); - errors++; - osalSysHalt("Memory broken"); -} - -/* - * - */ -static void memtest(void) { - - red_led_off(); - - while (true) { - memtest_run(&memtest_struct, MEMTEST_RUN_ALL); - green_led_toggle(); - } - - green_led_on(); - green_led_off(); -} - -/* - * - */ -static void membench(void) { - membench_run(&membench_ext, &membench_int, &membench_result_int2ext); - membench_run(&membench_int, &membench_ext, &membench_result_ext2int); -} - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - fsmcSramInit(); - fsmcSramStart(&SRAMD4, &sram_cfg); - - membench(); - memtest(); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h deleted file mode 100644 index d2333ba..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 12 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 3 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 TRUE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 6 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 2 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h deleted file mode 100644 index c439a31..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 TRUE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 -#define STM32_FSMC_DMA_CHN 0x03010201 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM TRUE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 TRUE - -/* - * FSMC PC card driver system settings. - */ -#define STM32_USE_FSMC_PCCARD FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c deleted file mode 100644 index 91b9aee..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#include "membench.h" -#include "memcpy_dma.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ -volatile int warning_suppressor; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ -/* - * Calculates memory access time in MiB/s. - */ -double speed_mibps(const time_measurement_t *tmu, size_t len) { - double size; // MiB - double time; // sec - - size = len; - size /= 1024 * 1024; - - time = tmu->last; - time /= STM32_SYSCLK; - - return size / time; -} - -/* - * Calculates memory access time in B/s. - */ -uint32_t speed_bps(const time_measurement_t *tmu, size_t len) { - - uint64_t tmp = len; - tmp *= STM32_SYSCLK; - - return tmp / tmu->last; -} - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/* - * - */ -void membench_run(membench_t *dest, const membench_t *src, - membench_result_t *result) { - time_measurement_t mem_tmu; - size_t len; - - if (src->size < dest->size) - len = src->size; - else - len = dest->size; - - /* memset */ - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - memset(dest->start, 0x55, dest->size); - chTMStopMeasurementX(&mem_tmu); - result->memset = speed_bps(&mem_tmu, dest->size); - - /* memcpy */ - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - memcpy(dest->start, src->start, len); - chTMStopMeasurementX(&mem_tmu); - result->memcpy = speed_bps(&mem_tmu, len); - - /* memcmp */ - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - warning_suppressor = memcmp(dest->start, src->start, len); - chTMStopMeasurementX(&mem_tmu); - result->memcmp = speed_bps(&mem_tmu, len); - - /* memcpy DMA */ - memcpy_dma_start(); - chTMObjectInit(&mem_tmu); - chTMStartMeasurementX(&mem_tmu); - memcpy_dma(dest->start, src->start, len); - chTMStopMeasurementX(&mem_tmu); - result->memcpy_dma = speed_bps(&mem_tmu, len); - memcpy_dma_stop(); -} - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h deleted file mode 100644 index 1169145..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/membench.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MEMBENCH_H_ -#define MEMBENCH_H_ - -/* - * - */ -typedef struct { - void *start; - size_t size; -} membench_t; - -/* - * all values in B/s - */ -typedef struct { - uint32_t memset; - uint32_t memcpy; - uint32_t memcpy_dma; - uint32_t memcmp; -} membench_result_t; - -/* - * - */ -#ifdef __cplusplus -extern "C" { -#endif - void membench_run(membench_t *dest, const membench_t *src, membench_result_t *ret); -#ifdef __cplusplus -} -#endif - -#endif /* MEMBENCH_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c deleted file mode 100644 index 4961c7c..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#include "memcpy_dma.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ -#define STM32_MEMCPY_DMA_PRIORITY 0 -#define STM32_MEMCPY_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ -static memcpy_dma_engine_t engine; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ -/* - * - */ -void memcpy_dma_start(void) { - bool b; - - engine.dma = STM32_DMA_STREAM(STM32_MEMCPY_DMA_STREAM); - b = dmaStreamAllocate(engine.dma, STM32_MEMCPY_DMA_PRIORITY, NULL, NULL); - osalDbgAssert(!b, "stream already allocated"); -} - -/* - * - */ -void memcpy_dma_stop(void) { - dmaStreamRelease(engine.dma); -} - -/* - * - */ -void memcpy_dma(void *dest, const void *src, size_t size) { - - size_t words = size / 4; - size_t remainder = size % 4; - size_t max_block = 0xFFFF; /* DMA limitation */ - - uint32_t cr = STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD; - - while (words > max_block) { - dmaStartMemCopy(engine.dma, cr, src, dest, max_block) - dmaWaitCompletion(engine.dma); - words -= max_block; - } - - dmaStartMemCopy(engine.dma, cr, src, dest, words) - dmaWaitCompletion(engine.dma); - - if (remainder > 0) - memcpy(dest+size-remainder, src+size-remainder, remainder); -} - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h deleted file mode 100644 index 8d6212c..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/FSMC_SRAM/memcpy_dma.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2013-2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MEMCPY_DMA_H_ -#define MEMCPY_DMA_H_ - -/* - * - */ -typedef struct { - const stm32_dma_stream_t *dma; -} memcpy_dma_engine_t; - -/* - * - */ -#ifdef __cplusplus -extern "C" { -#endif - void memcpy_dma_start(void); - void memcpy_dma_stop(void); - void memcpy_dma(void *dest, const void *src, size_t size); -#ifdef __cplusplus -} -#endif - -#endif /* MEMCPY_DMA_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.cproject deleted file mode 100644 index 4b2c0cd..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.cproject +++ /dev/null @@ -1,49 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.project deleted file mode 100644 index 8b3c1a2..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/.project +++ /dev/null @@ -1,27 +0,0 @@ - - - STM32F4xx-USB_HOST - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.core.ccnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/Makefile deleted file mode 100644 index 4946cba..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/Makefile +++ /dev/null @@ -1,226 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -Os -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x800 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x800 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk -include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(FATFSSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) $(FATFSINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/chconf.h deleted file mode 100644 index 449cb3d..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/chconf.h +++ /dev/null @@ -1,522 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ - void usbDbgSystemHalted(void); \ - usbDbgSystemHalted(); \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/diskio.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/diskio.h deleted file mode 100644 index 9650f68..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/diskio.h +++ /dev/null @@ -1,80 +0,0 @@ -/*-----------------------------------------------------------------------/ -/ Low level disk interface modlue include file (C)ChaN, 2014 / -/-----------------------------------------------------------------------*/ - -#ifndef _DISKIO_DEFINED -#define _DISKIO_DEFINED - -#ifdef __cplusplus -extern "C" { -#endif - -#define _USE_WRITE 1 /* 1: Enable disk_write function */ -#define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */ - -#include "integer.h" - - -/* Status of Disk Functions */ -typedef BYTE DSTATUS; - -/* Results of Disk Functions */ -typedef enum { - RES_OK = 0, /* 0: Successful */ - RES_ERROR, /* 1: R/W Error */ - RES_WRPRT, /* 2: Write Protected */ - RES_NOTRDY, /* 3: Not Ready */ - RES_PARERR /* 4: Invalid Parameter */ -} DRESULT; - - -/*---------------------------------------*/ -/* Prototypes for disk control functions */ - - -DSTATUS disk_initialize (BYTE pdrv); -DSTATUS disk_status (BYTE pdrv); -DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count); -DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count); -DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff); - - -/* Disk Status Bits (DSTATUS) */ - -#define STA_NOINIT 0x01 /* Drive not initialized */ -#define STA_NODISK 0x02 /* No medium in the drive */ -#define STA_PROTECT 0x04 /* Write protected */ - - -/* Command code for disk_ioctrl fucntion */ - -/* Generic command (Used by FatFs) */ -#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ -#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ -#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */ -#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ -#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ - -/* Generic command (Not used by FatFs) */ -#define CTRL_POWER 5 /* Get/Set power status */ -#define CTRL_LOCK 6 /* Lock/Unlock media removal */ -#define CTRL_EJECT 7 /* Eject media */ -#define CTRL_FORMAT 8 /* Create physical format on the media */ - -/* MMC/SDC specific ioctl command */ -#define MMC_GET_TYPE 10 /* Get card type */ -#define MMC_GET_CSD 11 /* Get CSD */ -#define MMC_GET_CID 12 /* Get CID */ -#define MMC_GET_OCR 13 /* Get OCR */ -#define MMC_GET_SDSTAT 14 /* Get SD status */ - -/* ATA/CF specific ioctl command */ -#define ATA_GET_REV 20 /* Get F/W revision */ -#define ATA_GET_MODEL 21 /* Get model name */ -#define ATA_GET_SN 22 /* Get serial number */ - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c deleted file mode 100644 index 98a7edf..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c +++ /dev/null @@ -1,144 +0,0 @@ -/*-----------------------------------------------------------------------*/ -/* Low level disk I/O module skeleton for FatFs (C)ChaN, 2007 */ -/*-----------------------------------------------------------------------*/ -/* This is a stub disk I/O module that acts as front end of the existing */ -/* disk I/O modules and attach it to FatFs module with common interface. */ -/*-----------------------------------------------------------------------*/ - -#include "hal.h" -#include "ffconf.h" -#include "diskio.h" - -#include "usbh.h" -#include "usbh/dev/msd.h" - -/*-----------------------------------------------------------------------*/ -/* Correspondence between physical drive number and physical drive. */ -#define MSDLUN0 0 - -/*-----------------------------------------------------------------------*/ -/* Inidialize a Drive */ - -DSTATUS disk_initialize ( - BYTE pdrv /* Physical drive nmuber (0..) */ -) -{ - DSTATUS stat; - - switch (pdrv) { - case MSDLUN0: - stat = 0; - /* It is initialized externally, just reads the status.*/ - if (blkGetDriverState(&MSBLKD[0]) != BLK_READY) - stat |= STA_NOINIT; - return stat; - } - return STA_NOINIT; -} - - - -/*-----------------------------------------------------------------------*/ -/* Return Disk Status */ - -DSTATUS disk_status ( - BYTE pdrv /* Physical drive nmuber (0..) */ -) -{ - DSTATUS stat; - - switch (pdrv) { - case MSDLUN0: - stat = 0; - /* It is initialized externally, just reads the status.*/ - if (blkGetDriverState(&MSBLKD[0]) != BLK_READY) - stat |= STA_NOINIT; - return stat; - } - return STA_NOINIT; -} - - - -/*-----------------------------------------------------------------------*/ -/* Read Sector(s) */ - -DRESULT disk_read ( - BYTE pdrv, /* Physical drive nmuber (0..) */ - BYTE *buff, /* Data buffer to store read data */ - DWORD sector, /* Sector address (LBA) */ - UINT count /* Number of sectors to read (1..255) */ -) -{ - switch (pdrv) { - case MSDLUN0: - /* It is initialized externally, just reads the status.*/ - if (blkGetDriverState(&MSBLKD[0]) != BLK_READY) - return RES_NOTRDY; - if (usbhmsdLUNRead(&MSBLKD[0], sector, buff, count)) - return RES_ERROR; - return RES_OK; - } - return RES_PARERR; -} - - - -/*-----------------------------------------------------------------------*/ -/* Write Sector(s) */ - -#if _USE_WRITE -DRESULT disk_write ( - BYTE pdrv, /* Physical drive nmuber (0..) */ - const BYTE *buff, /* Data to be written */ - DWORD sector, /* Sector address (LBA) */ - UINT count /* Number of sectors to write (1..255) */ -) -{ - switch (pdrv) { - case MSDLUN0: - /* It is initialized externally, just reads the status.*/ - if (blkGetDriverState(&MSBLKD[0]) != BLK_READY) - return RES_NOTRDY; - if (usbhmsdLUNWrite(&MSBLKD[0], sector, buff, count)) - return RES_ERROR; - return RES_OK; - } - return RES_PARERR; -} -#endif /* _USE_WRITE */ - - - -/*-----------------------------------------------------------------------*/ -/* Miscellaneous Functions */ - -#if _USE_IOCTL -DRESULT disk_ioctl ( - BYTE pdrv, /* Physical drive nmuber (0..) */ - BYTE cmd, /* Control code */ - void *buff /* Buffer to send/receive control data */ -) -{ - switch (pdrv) { - case MSDLUN0: - switch (cmd) { - case CTRL_SYNC: - return RES_OK; - case GET_SECTOR_COUNT: - *((DWORD *)buff) = MSBLKD[0].info.blk_num; - return RES_OK; - case GET_SECTOR_SIZE: - *((WORD *)buff) = MSBLKD[0].info.blk_size; - return RES_OK; - default: - return RES_PARERR; - } - } - return RES_PARERR; -} -#endif /* _USE_IOCTL */ - -DWORD get_fattime(void) { - return ((uint32_t)0 | (1 << 16)) | (1 << 21); /* wrong but valid time */ -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.c deleted file mode 100644 index 45e20ce..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.c +++ /dev/null @@ -1,4611 +0,0 @@ -/*----------------------------------------------------------------------------/ -/ FatFs - FAT file system module R0.10c (C)ChaN, 2014 -/-----------------------------------------------------------------------------/ -/ FatFs module is a generic FAT file system module for small embedded systems. -/ This is a free software that opened for education, research and commercial -/ developments under license policy of following terms. -/ -/ Copyright (C) 2014, ChaN, all right reserved. -/ -/ * The FatFs module is a free software and there is NO WARRANTY. -/ * No restriction on use. You can use, modify and redistribute it for -/ personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY. -/ * Redistributions of source code must retain the above copyright notice. -/ -/-----------------------------------------------------------------------------/ -/ Feb 26,'06 R0.00 Prototype. -/ -/ Apr 29,'06 R0.01 First stable version. -/ -/ Jun 01,'06 R0.02 Added FAT12 support. -/ Removed unbuffered mode. -/ Fixed a problem on small (<32M) partition. -/ Jun 10,'06 R0.02a Added a configuration option (_FS_MINIMUM). -/ -/ Sep 22,'06 R0.03 Added f_rename(). -/ Changed option _FS_MINIMUM to _FS_MINIMIZE. -/ Dec 11,'06 R0.03a Improved cluster scan algorithm to write files fast. -/ Fixed f_mkdir() creates incorrect directory on FAT32. -/ -/ Feb 04,'07 R0.04 Supported multiple drive system. -/ Changed some interfaces for multiple drive system. -/ Changed f_mountdrv() to f_mount(). -/ Added f_mkfs(). -/ Apr 01,'07 R0.04a Supported multiple partitions on a physical drive. -/ Added a capability of extending file size to f_lseek(). -/ Added minimization level 3. -/ Fixed an endian sensitive code in f_mkfs(). -/ May 05,'07 R0.04b Added a configuration option _USE_NTFLAG. -/ Added FSINFO support. -/ Fixed DBCS name can result FR_INVALID_NAME. -/ Fixed short seek (<= csize) collapses the file object. -/ -/ Aug 25,'07 R0.05 Changed arguments of f_read(), f_write() and f_mkfs(). -/ Fixed f_mkfs() on FAT32 creates incorrect FSINFO. -/ Fixed f_mkdir() on FAT32 creates incorrect directory. -/ Feb 03,'08 R0.05a Added f_truncate() and f_utime(). -/ Fixed off by one error at FAT sub-type determination. -/ Fixed btr in f_read() can be mistruncated. -/ Fixed cached sector is not flushed when create and close without write. -/ -/ Apr 01,'08 R0.06 Added fputc(), fputs(), fprintf() and fgets(). -/ Improved performance of f_lseek() on moving to the same or following cluster. -/ -/ Apr 01,'09 R0.07 Merged Tiny-FatFs as a configuration option. (_FS_TINY) -/ Added long file name feature. -/ Added multiple code page feature. -/ Added re-entrancy for multitask operation. -/ Added auto cluster size selection to f_mkfs(). -/ Added rewind option to f_readdir(). -/ Changed result code of critical errors. -/ Renamed string functions to avoid name collision. -/ Apr 14,'09 R0.07a Separated out OS dependent code on reentrant cfg. -/ Added multiple sector size feature. -/ Jun 21,'09 R0.07c Fixed f_unlink() can return FR_OK on error. -/ Fixed wrong cache control in f_lseek(). -/ Added relative path feature. -/ Added f_chdir() and f_chdrive(). -/ Added proper case conversion to extended character. -/ Nov 03,'09 R0.07e Separated out configuration options from ff.h to ffconf.h. -/ Fixed f_unlink() fails to remove a sub-directory on _FS_RPATH. -/ Fixed name matching error on the 13 character boundary. -/ Added a configuration option, _LFN_UNICODE. -/ Changed f_readdir() to return the SFN with always upper case on non-LFN cfg. -/ -/ May 15,'10 R0.08 Added a memory configuration option. (_USE_LFN = 3) -/ Added file lock feature. (_FS_SHARE) -/ Added fast seek feature. (_USE_FASTSEEK) -/ Changed some types on the API, XCHAR->TCHAR. -/ Changed .fname in the FILINFO structure on Unicode cfg. -/ String functions support UTF-8 encoding files on Unicode cfg. -/ Aug 16,'10 R0.08a Added f_getcwd(). -/ Added sector erase feature. (_USE_ERASE) -/ Moved file lock semaphore table from fs object to the bss. -/ Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'. -/ Fixed f_mkfs() creates wrong FAT32 volume. -/ Jan 15,'11 R0.08b Fast seek feature is also applied to f_read() and f_write(). -/ f_lseek() reports required table size on creating CLMP. -/ Extended format syntax of f_printf(). -/ Ignores duplicated directory separators in given path name. -/ -/ Sep 06,'11 R0.09 f_mkfs() supports multiple partition to complete the multiple partition feature. -/ Added f_fdisk(). -/ Aug 27,'12 R0.09a Changed f_open() and f_opendir() reject null object pointer to avoid crash. -/ Changed option name _FS_SHARE to _FS_LOCK. -/ Fixed assertion failure due to OS/2 EA on FAT12/16 volume. -/ Jan 24,'13 R0.09b Added f_setlabel() and f_getlabel(). -/ -/ Oct 02,'13 R0.10 Added selection of character encoding on the file. (_STRF_ENCODE) -/ Added f_closedir(). -/ Added forced full FAT scan for f_getfree(). (_FS_NOFSINFO) -/ Added forced mount feature with changes of f_mount(). -/ Improved behavior of volume auto detection. -/ Improved write throughput of f_puts() and f_printf(). -/ Changed argument of f_chdrive(), f_mkfs(), disk_read() and disk_write(). -/ Fixed f_write() can be truncated when the file size is close to 4GB. -/ Fixed f_open(), f_mkdir() and f_setlabel() can return incorrect error code. -/ Jan 15,'14 R0.10a Added arbitrary strings as drive number in the path name. (_STR_VOLUME_ID) -/ Added a configuration option of minimum sector size. (_MIN_SS) -/ 2nd argument of f_rename() can have a drive number and it will be ignored. -/ Fixed f_mount() with forced mount fails when drive number is >= 1. -/ Fixed f_close() invalidates the file object without volume lock. -/ Fixed f_closedir() returns but the volume lock is left acquired. -/ Fixed creation of an entry with LFN fails on too many SFN collisions. -/ May 19,'14 R0.10b Fixed a hard error in the disk I/O layer can collapse the directory entry. -/ Fixed LFN entry is not deleted on delete/rename an object with lossy converted SFN. -/ Nov 09,'14 R0.10c Added a configuration option for the platforms without RTC. (_FS_NORTC) -/ Fixed volume label created by Mac OS X cannot be retrieved with f_getlabel(). -/ Fixed a potential problem of FAT access that can appear on disk error. -/ Fixed null pointer dereference on attempting to delete the root direcotry. -/---------------------------------------------------------------------------*/ - -#include "ff.h" /* Declarations of FatFs API */ -#include "diskio.h" /* Declarations of disk I/O functions */ - - - - -/*-------------------------------------------------------------------------- - - Module Private Definitions - ----------------------------------------------------------------------------*/ - -#if _FATFS != 80376 /* Revision ID */ -#error Wrong include file (ff.h). -#endif - - -/* Reentrancy related */ -#if _FS_REENTRANT -#if _USE_LFN == 1 -#error Static LFN work area cannot be used at thread-safe configuration -#endif -#define ENTER_FF(fs) { if (!lock_fs(fs)) return FR_TIMEOUT; } -#define LEAVE_FF(fs, res) { unlock_fs(fs, res); return res; } -#else -#define ENTER_FF(fs) -#define LEAVE_FF(fs, res) return res -#endif - -#define ABORT(fs, res) { fp->err = (BYTE)(res); LEAVE_FF(fs, res); } - - -/* Definitions of sector size */ -#if (_MAX_SS < _MIN_SS) || (_MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096) || (_MIN_SS != 512 && _MIN_SS != 1024 && _MIN_SS != 2048 && _MIN_SS != 4096) -#error Wrong sector size configuration -#endif -#if _MAX_SS == _MIN_SS -#define SS(fs) ((UINT)_MAX_SS) /* Fixed sector size */ -#else -#define SS(fs) ((fs)->ssize) /* Variable sector size */ -#endif - - -/* Timestamp feature */ -#if _FS_NORTC == 1 -#if _NORTC_YEAR < 1980 || _NORTC_YEAR > 2107 || _NORTC_MON < 1 || _NORTC_MON > 12 || _NORTC_MDAY < 1 || _NORTC_MDAY > 31 -#error Invalid _FS_NORTC settings -#endif -#define GET_FATTIME() ((DWORD)(_NORTC_YEAR - 1980) << 25 | (DWORD)_NORTC_MON << 21 | (DWORD)_NORTC_MDAY << 16) -#else -#define GET_FATTIME() get_fattime() -#endif - - -/* File access control feature */ -#if _FS_LOCK -#if _FS_READONLY -#error _FS_LOCK must be 0 at read-only configuration -#endif -typedef struct { - FATFS *fs; /* Object ID 1, volume (NULL:blank entry) */ - DWORD clu; /* Object ID 2, directory (0:root) */ - WORD idx; /* Object ID 3, directory index */ - WORD ctr; /* Object open counter, 0:none, 0x01..0xFF:read mode open count, 0x100:write mode */ -} FILESEM; -#endif - - - -/* DBCS code ranges and SBCS extend character conversion table */ - -#if _CODE_PAGE == 932 /* Japanese Shift-JIS */ -#define _DF1S 0x81 /* DBC 1st byte range 1 start */ -#define _DF1E 0x9F /* DBC 1st byte range 1 end */ -#define _DF2S 0xE0 /* DBC 1st byte range 2 start */ -#define _DF2E 0xFC /* DBC 1st byte range 2 end */ -#define _DS1S 0x40 /* DBC 2nd byte range 1 start */ -#define _DS1E 0x7E /* DBC 2nd byte range 1 end */ -#define _DS2S 0x80 /* DBC 2nd byte range 2 start */ -#define _DS2E 0xFC /* DBC 2nd byte range 2 end */ - -#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x40 -#define _DS1E 0x7E -#define _DS2S 0x80 -#define _DS2E 0xFE - -#elif _CODE_PAGE == 949 /* Korean */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x41 -#define _DS1E 0x5A -#define _DS2S 0x61 -#define _DS2E 0x7A -#define _DS3S 0x81 -#define _DS3E 0xFE - -#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x40 -#define _DS1E 0x7E -#define _DS2S 0xA1 -#define _DS2E 0xFE - -#elif _CODE_PAGE == 437 /* U.S. (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 720 /* Arabic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 737 /* Greek (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \ - 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 775 /* Baltic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 850 /* Multilingual Latin 1 (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 852 /* Latin 2 (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF} - -#elif _CODE_PAGE == 855 /* Cyrillic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \ - 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \ - 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 857 /* Turkish (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 858 /* Multilingual Latin 1 + Euro (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 862 /* Hebrew (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 866 /* Russian (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 874 /* Thai (OEM, Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} - -#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ - 0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF} - -#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} - -#elif _CODE_PAGE == 1253 /* Greek (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \ - 0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF} - -#elif _CODE_PAGE == 1254 /* Turkish (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} - -#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1256 /* Arabic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1257 /* Baltic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} - -#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F} - -#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */ -#if _USE_LFN -#error Cannot use LFN feature without valid code page. -#endif -#define _DF1S 0 - -#else -#error Unknown code page - -#endif - - -/* Character code support macros */ -#define IsUpper(c) (((c)>='A')&&((c)<='Z')) -#define IsLower(c) (((c)>='a')&&((c)<='z')) -#define IsDigit(c) (((c)>='0')&&((c)<='9')) - -#if _DF1S /* Code page is DBCS */ - -#ifdef _DF2S /* Two 1st byte areas */ -#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E)) -#else /* One 1st byte area */ -#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) -#endif - -#ifdef _DS3S /* Three 2nd byte areas */ -#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E)) -#else /* Two 2nd byte areas */ -#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E)) -#endif - -#else /* Code page is SBCS */ - -#define IsDBCS1(c) 0 -#define IsDBCS2(c) 0 - -#endif /* _DF1S */ - - -/* Name status flags */ -#define NSFLAG 11 /* Index of name status byte in fn[] */ -#define NS_LOSS 0x01 /* Out of 8.3 format */ -#define NS_LFN 0x02 /* Force to create LFN entry */ -#define NS_LAST 0x04 /* Last segment */ -#define NS_BODY 0x08 /* Lower case flag (body) */ -#define NS_EXT 0x10 /* Lower case flag (ext) */ -#define NS_DOT 0x20 /* Dot entry */ - - -/* FAT sub-type boundaries (Differ from specs but correct for real DOS/Windows) */ -#define MIN_FAT16 4086U /* Minimum number of clusters as FAT16 */ -#define MIN_FAT32 65526U /* Minimum number of clusters as FAT32 */ - - -/* FatFs refers the members in the FAT structures as byte array instead of -/ structure member because the structure is not binary compatible between -/ different platforms */ - -#define BS_jmpBoot 0 /* x86 jump instruction (3) */ -#define BS_OEMName 3 /* OEM name (8) */ -#define BPB_BytsPerSec 11 /* Sector size [byte] (2) */ -#define BPB_SecPerClus 13 /* Cluster size [sector] (1) */ -#define BPB_RsvdSecCnt 14 /* Size of reserved area [sector] (2) */ -#define BPB_NumFATs 16 /* Number of FAT copies (1) */ -#define BPB_RootEntCnt 17 /* Number of root directory entries for FAT12/16 (2) */ -#define BPB_TotSec16 19 /* Volume size [sector] (2) */ -#define BPB_Media 21 /* Media descriptor (1) */ -#define BPB_FATSz16 22 /* FAT size [sector] (2) */ -#define BPB_SecPerTrk 24 /* Track size [sector] (2) */ -#define BPB_NumHeads 26 /* Number of heads (2) */ -#define BPB_HiddSec 28 /* Number of special hidden sectors (4) */ -#define BPB_TotSec32 32 /* Volume size [sector] (4) */ -#define BS_DrvNum 36 /* Physical drive number (2) */ -#define BS_BootSig 38 /* Extended boot signature (1) */ -#define BS_VolID 39 /* Volume serial number (4) */ -#define BS_VolLab 43 /* Volume label (8) */ -#define BS_FilSysType 54 /* File system type (1) */ -#define BPB_FATSz32 36 /* FAT size [sector] (4) */ -#define BPB_ExtFlags 40 /* Extended flags (2) */ -#define BPB_FSVer 42 /* File system version (2) */ -#define BPB_RootClus 44 /* Root directory first cluster (4) */ -#define BPB_FSInfo 48 /* Offset of FSINFO sector (2) */ -#define BPB_BkBootSec 50 /* Offset of backup boot sector (2) */ -#define BS_DrvNum32 64 /* Physical drive number (2) */ -#define BS_BootSig32 66 /* Extended boot signature (1) */ -#define BS_VolID32 67 /* Volume serial number (4) */ -#define BS_VolLab32 71 /* Volume label (8) */ -#define BS_FilSysType32 82 /* File system type (1) */ -#define FSI_LeadSig 0 /* FSI: Leading signature (4) */ -#define FSI_StrucSig 484 /* FSI: Structure signature (4) */ -#define FSI_Free_Count 488 /* FSI: Number of free clusters (4) */ -#define FSI_Nxt_Free 492 /* FSI: Last allocated cluster (4) */ -#define MBR_Table 446 /* MBR: Partition table offset (2) */ -#define SZ_PTE 16 /* MBR: Size of a partition table entry */ -#define BS_55AA 510 /* Signature word (2) */ - -#define DIR_Name 0 /* Short file name (11) */ -#define DIR_Attr 11 /* Attribute (1) */ -#define DIR_NTres 12 /* NT flag (1) */ -#define DIR_CrtTimeTenth 13 /* Created time sub-second (1) */ -#define DIR_CrtTime 14 /* Created time (2) */ -#define DIR_CrtDate 16 /* Created date (2) */ -#define DIR_LstAccDate 18 /* Last accessed date (2) */ -#define DIR_FstClusHI 20 /* Higher 16-bit of first cluster (2) */ -#define DIR_WrtTime 22 /* Modified time (2) */ -#define DIR_WrtDate 24 /* Modified date (2) */ -#define DIR_FstClusLO 26 /* Lower 16-bit of first cluster (2) */ -#define DIR_FileSize 28 /* File size (4) */ -#define LDIR_Ord 0 /* LFN entry order and LLE flag (1) */ -#define LDIR_Attr 11 /* LFN attribute (1) */ -#define LDIR_Type 12 /* LFN type (1) */ -#define LDIR_Chksum 13 /* Sum of corresponding SFN entry */ -#define LDIR_FstClusLO 26 /* Filled by zero (0) */ -#define SZ_DIR 32 /* Size of a directory entry */ -#define LLE 0x40 /* Last long entry flag in LDIR_Ord */ -#define DDE 0xE5 /* Deleted directory entry mark in DIR_Name[0] */ -#define NDDE 0x05 /* Replacement of the character collides with DDE */ - - - - -/*------------------------------------------------------------*/ -/* Module private work area */ -/*------------------------------------------------------------*/ -/* Remark: Uninitialized variables with static duration are -/ guaranteed zero/null at start-up. If not, either the linker -/ or start-up routine being used is out of ANSI-C standard. -*/ - -#if _VOLUMES < 1 || _VOLUMES > 9 -#error Wrong _VOLUMES setting -#endif -static FATFS *FatFs[_VOLUMES]; /* Pointer to the file system objects (logical drives) */ -static WORD Fsid; /* File system mount ID */ - -#if _FS_RPATH && _VOLUMES >= 2 -static BYTE CurrVol; /* Current drive */ -#endif - -#if _FS_LOCK -static FILESEM Files[_FS_LOCK]; /* Open object lock semaphores */ -#endif - -#if _USE_LFN == 0 /* Non LFN feature */ -#define DEF_NAMEBUF BYTE sfn[12] -#define INIT_BUF(dobj) (dobj).fn = sfn -#define FREE_BUF() -#else -#if _MAX_LFN < 12 || _MAX_LFN > 255 -#error Wrong _MAX_LFN setting -#endif -#if _USE_LFN == 1 /* LFN feature with static working buffer */ -static WCHAR LfnBuf[_MAX_LFN+1]; -#define DEF_NAMEBUF BYTE sfn[12] -#define INIT_BUF(dobj) { (dobj).fn = sfn; (dobj).lfn = LfnBuf; } -#define FREE_BUF() -#elif _USE_LFN == 2 /* LFN feature with dynamic working buffer on the stack */ -#define DEF_NAMEBUF BYTE sfn[12]; WCHAR lbuf[_MAX_LFN+1] -#define INIT_BUF(dobj) { (dobj).fn = sfn; (dobj).lfn = lbuf; } -#define FREE_BUF() -#elif _USE_LFN == 3 /* LFN feature with dynamic working buffer on the heap */ -#define DEF_NAMEBUF BYTE sfn[12]; WCHAR *lfn -#define INIT_BUF(dobj) { lfn = ff_memalloc((_MAX_LFN + 1) * 2); if (!lfn) LEAVE_FF((dobj).fs, FR_NOT_ENOUGH_CORE); (dobj).lfn = lfn; (dobj).fn = sfn; } -#define FREE_BUF() ff_memfree(lfn) -#else -#error Wrong _USE_LFN setting -#endif -#endif - -#ifdef _EXCVT -static const BYTE ExCvt[] = _EXCVT; /* Upper conversion table for extended characters */ -#endif - - - - - - -/*-------------------------------------------------------------------------- - - Module Private Functions - ----------------------------------------------------------------------------*/ - - -/*-----------------------------------------------------------------------*/ -/* String functions */ -/*-----------------------------------------------------------------------*/ - -/* Copy memory to memory */ -static -void mem_cpy (void* dst, const void* src, UINT cnt) { - BYTE *d = (BYTE*)dst; - const BYTE *s = (const BYTE*)src; - -#if _WORD_ACCESS == 1 - while (cnt >= sizeof (int)) { - *(int*)d = *(int*)s; - d += sizeof (int); s += sizeof (int); - cnt -= sizeof (int); - } -#endif - while (cnt--) - *d++ = *s++; -} - -/* Fill memory */ -static -void mem_set (void* dst, int val, UINT cnt) { - BYTE *d = (BYTE*)dst; - - while (cnt--) - *d++ = (BYTE)val; -} - -/* Compare memory to memory */ -static -int mem_cmp (const void* dst, const void* src, UINT cnt) { - const BYTE *d = (const BYTE *)dst, *s = (const BYTE *)src; - int r = 0; - - while (cnt-- && (r = *d++ - *s++) == 0) ; - return r; -} - -/* Check if chr is contained in the string */ -static -int chk_chr (const char* str, int chr) { - while (*str && *str != chr) str++; - return *str; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Request/Release grant to access the volume */ -/*-----------------------------------------------------------------------*/ -#if _FS_REENTRANT -static -int lock_fs ( - FATFS* fs /* File system object */ -) -{ - return ff_req_grant(fs->sobj); -} - - -static -void unlock_fs ( - FATFS* fs, /* File system object */ - FRESULT res /* Result code to be returned */ -) -{ - if (fs && - res != FR_NOT_ENABLED && - res != FR_INVALID_DRIVE && - res != FR_INVALID_OBJECT && - res != FR_TIMEOUT) { - ff_rel_grant(fs->sobj); - } -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* File lock control functions */ -/*-----------------------------------------------------------------------*/ -#if _FS_LOCK - -static -FRESULT chk_lock ( /* Check if the file can be accessed */ - DIR* dp, /* Directory object pointing the file to be checked */ - int acc /* Desired access type (0:Read, 1:Write, 2:Delete/Rename) */ -) -{ - UINT i, be; - - /* Search file semaphore table */ - for (i = be = 0; i < _FS_LOCK; i++) { - if (Files[i].fs) { /* Existing entry */ - if (Files[i].fs == dp->fs && /* Check if the object matched with an open object */ - Files[i].clu == dp->sclust && - Files[i].idx == dp->index) break; - } else { /* Blank entry */ - be = 1; - } - } - if (i == _FS_LOCK) /* The object is not opened */ - return (be || acc == 2) ? FR_OK : FR_TOO_MANY_OPEN_FILES; /* Is there a blank entry for new object? */ - - /* The object has been opened. Reject any open against writing file and all write mode open */ - return (acc || Files[i].ctr == 0x100) ? FR_LOCKED : FR_OK; -} - - -static -int enq_lock (void) /* Check if an entry is available for a new object */ -{ - UINT i; - - for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; - return (i == _FS_LOCK) ? 0 : 1; -} - - -static -UINT inc_lock ( /* Increment object open counter and returns its index (0:Internal error) */ - DIR* dp, /* Directory object pointing the file to register or increment */ - int acc /* Desired access (0:Read, 1:Write, 2:Delete/Rename) */ -) -{ - UINT i; - - - for (i = 0; i < _FS_LOCK; i++) { /* Find the object */ - if (Files[i].fs == dp->fs && - Files[i].clu == dp->sclust && - Files[i].idx == dp->index) break; - } - - if (i == _FS_LOCK) { /* Not opened. Register it as new. */ - for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ; - if (i == _FS_LOCK) return 0; /* No free entry to register (int err) */ - Files[i].fs = dp->fs; - Files[i].clu = dp->sclust; - Files[i].idx = dp->index; - Files[i].ctr = 0; - } - - if (acc && Files[i].ctr) return 0; /* Access violation (int err) */ - - Files[i].ctr = acc ? 0x100 : Files[i].ctr + 1; /* Set semaphore value */ - - return i + 1; -} - - -static -FRESULT dec_lock ( /* Decrement object open counter */ - UINT i /* Semaphore index (1..) */ -) -{ - WORD n; - FRESULT res; - - - if (--i < _FS_LOCK) { /* Shift index number origin from 0 */ - n = Files[i].ctr; - if (n == 0x100) n = 0; /* If write mode open, delete the entry */ - if (n) n--; /* Decrement read mode open count */ - Files[i].ctr = n; - if (!n) Files[i].fs = 0; /* Delete the entry if open count gets zero */ - res = FR_OK; - } else { - res = FR_INT_ERR; /* Invalid index nunber */ - } - return res; -} - - -static -void clear_lock ( /* Clear lock entries of the volume */ - FATFS *fs -) -{ - UINT i; - - for (i = 0; i < _FS_LOCK; i++) { - if (Files[i].fs == fs) Files[i].fs = 0; - } -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* Move/Flush disk access window in the file system object */ -/*-----------------------------------------------------------------------*/ -#if !_FS_READONLY -static -FRESULT sync_window ( - FATFS* fs /* File system object */ -) -{ - DWORD wsect; - UINT nf; - FRESULT res = FR_OK; - - - if (fs->wflag) { /* Write back the sector if it is dirty */ - wsect = fs->winsect; /* Current sector number */ - if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK) { - res = FR_DISK_ERR; - } else { - fs->wflag = 0; - if (wsect - fs->fatbase < fs->fsize) { /* Is it in the FAT area? */ - for (nf = fs->n_fats; nf >= 2; nf--) { /* Reflect the change to all FAT copies */ - wsect += fs->fsize; - disk_write(fs->drv, fs->win, wsect, 1); - } - } - } - } - return res; -} -#endif - - -static -FRESULT move_window ( - FATFS* fs, /* File system object */ - DWORD sector /* Sector number to make appearance in the fs->win[] */ -) -{ - FRESULT res = FR_OK; - - - if (sector != fs->winsect) { /* Window offset changed? */ -#if !_FS_READONLY - res = sync_window(fs); /* Write-back changes */ -#endif - if (res == FR_OK) { /* Fill sector window with new data */ - if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK) { - sector = 0xFFFFFFFF; /* Invalidate window if data is not reliable */ - res = FR_DISK_ERR; - } - fs->winsect = sector; - } - } - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Synchronize file system and strage device */ -/*-----------------------------------------------------------------------*/ -#if !_FS_READONLY -static -FRESULT sync_fs ( /* FR_OK: successful, FR_DISK_ERR: failed */ - FATFS* fs /* File system object */ -) -{ - FRESULT res; - - - res = sync_window(fs); - if (res == FR_OK) { - /* Update FSINFO sector if needed */ - if (fs->fs_type == FS_FAT32 && fs->fsi_flag == 1) { - /* Create FSINFO structure */ - mem_set(fs->win, 0, SS(fs)); - ST_WORD(fs->win+BS_55AA, 0xAA55); - ST_DWORD(fs->win+FSI_LeadSig, 0x41615252); - ST_DWORD(fs->win+FSI_StrucSig, 0x61417272); - ST_DWORD(fs->win+FSI_Free_Count, fs->free_clust); - ST_DWORD(fs->win+FSI_Nxt_Free, fs->last_clust); - /* Write it into the FSINFO sector */ - fs->winsect = fs->volbase + 1; - disk_write(fs->drv, fs->win, fs->winsect, 1); - fs->fsi_flag = 0; - } - /* Make sure that no pending write process in the physical drive */ - if (disk_ioctl(fs->drv, CTRL_SYNC, 0) != RES_OK) - res = FR_DISK_ERR; - } - - return res; -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* Get sector# from cluster# */ -/*-----------------------------------------------------------------------*/ -/* Hidden API for hacks and disk tools */ - -DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */ - FATFS* fs, /* File system object */ - DWORD clst /* Cluster# to be converted */ -) -{ - clst -= 2; - if (clst >= fs->n_fatent - 2) return 0; /* Invalid cluster# */ - return clst * fs->csize + fs->database; -} - - - - -/*-----------------------------------------------------------------------*/ -/* FAT access - Read value of a FAT entry */ -/*-----------------------------------------------------------------------*/ -/* Hidden API for hacks and disk tools */ - -DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, 2..0x0FFFFFFF:Cluster status */ - FATFS* fs, /* File system object */ - DWORD clst /* FAT item index (cluster#) to get the value */ -) -{ - UINT wc, bc; - BYTE *p; - DWORD val; - - - if (clst < 2 || clst >= fs->n_fatent) { /* Check range */ - val = 1; /* Internal error */ - - } else { - val = 0xFFFFFFFF; /* Default value falls on disk error */ - - switch (fs->fs_type) { - case FS_FAT12 : - bc = (UINT)clst; bc += bc / 2; - if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break; - wc = fs->win[bc++ % SS(fs)]; - if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break; - wc |= fs->win[bc % SS(fs)] << 8; - val = clst & 1 ? wc >> 4 : (wc & 0xFFF); - break; - - case FS_FAT16 : - if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))) != FR_OK) break; - p = &fs->win[clst * 2 % SS(fs)]; - val = LD_WORD(p); - break; - - case FS_FAT32 : - if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))) != FR_OK) break; - p = &fs->win[clst * 4 % SS(fs)]; - val = LD_DWORD(p) & 0x0FFFFFFF; - break; - - default: - val = 1; /* Internal error */ - } - } - - return val; -} - - - - -/*-----------------------------------------------------------------------*/ -/* FAT access - Change value of a FAT entry */ -/*-----------------------------------------------------------------------*/ -/* Hidden API for hacks and disk tools */ - -#if !_FS_READONLY -FRESULT put_fat ( - FATFS* fs, /* File system object */ - DWORD clst, /* FAT item index (cluster#) to be set */ - DWORD val /* New value to mark the cluster */ -) -{ - UINT bc; - BYTE *p; - FRESULT res; - - - if (clst < 2 || clst >= fs->n_fatent) { /* Check range */ - res = FR_INT_ERR; - - } else { - switch (fs->fs_type) { - case FS_FAT12 : - bc = (UINT)clst; bc += bc / 2; - res = move_window(fs, fs->fatbase + (bc / SS(fs))); - if (res != FR_OK) break; - p = &fs->win[bc++ % SS(fs)]; - *p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val; - fs->wflag = 1; - res = move_window(fs, fs->fatbase + (bc / SS(fs))); - if (res != FR_OK) break; - p = &fs->win[bc % SS(fs)]; - *p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F)); - fs->wflag = 1; - break; - - case FS_FAT16 : - res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))); - if (res != FR_OK) break; - p = &fs->win[clst * 2 % SS(fs)]; - ST_WORD(p, (WORD)val); - fs->wflag = 1; - break; - - case FS_FAT32 : - res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))); - if (res != FR_OK) break; - p = &fs->win[clst * 4 % SS(fs)]; - val |= LD_DWORD(p) & 0xF0000000; - ST_DWORD(p, val); - fs->wflag = 1; - break; - - default : - res = FR_INT_ERR; - } - } - - return res; -} -#endif /* !_FS_READONLY */ - - - - -/*-----------------------------------------------------------------------*/ -/* FAT handling - Remove a cluster chain */ -/*-----------------------------------------------------------------------*/ -#if !_FS_READONLY -static -FRESULT remove_chain ( - FATFS* fs, /* File system object */ - DWORD clst /* Cluster# to remove a chain from */ -) -{ - FRESULT res; - DWORD nxt; -#if _USE_TRIM - DWORD scl = clst, ecl = clst, rt[2]; -#endif - - if (clst < 2 || clst >= fs->n_fatent) { /* Check range */ - res = FR_INT_ERR; - - } else { - res = FR_OK; - while (clst < fs->n_fatent) { /* Not a last link? */ - nxt = get_fat(fs, clst); /* Get cluster status */ - if (nxt == 0) break; /* Empty cluster? */ - if (nxt == 1) { res = FR_INT_ERR; break; } /* Internal error? */ - if (nxt == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } /* Disk error? */ - res = put_fat(fs, clst, 0); /* Mark the cluster "empty" */ - if (res != FR_OK) break; - if (fs->free_clust != 0xFFFFFFFF) { /* Update FSINFO */ - fs->free_clust++; - fs->fsi_flag |= 1; - } -#if _USE_TRIM - if (ecl + 1 == nxt) { /* Is next cluster contiguous? */ - ecl = nxt; - } else { /* End of contiguous clusters */ - rt[0] = clust2sect(fs, scl); /* Start sector */ - rt[1] = clust2sect(fs, ecl) + fs->csize - 1; /* End sector */ - disk_ioctl(fs->drv, CTRL_TRIM, rt); /* Erase the block */ - scl = ecl = nxt; - } -#endif - clst = nxt; /* Next cluster */ - } - } - - return res; -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* FAT handling - Stretch or Create a cluster chain */ -/*-----------------------------------------------------------------------*/ -#if !_FS_READONLY -static -DWORD create_chain ( /* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */ - FATFS* fs, /* File system object */ - DWORD clst /* Cluster# to stretch. 0 means create a new chain. */ -) -{ - DWORD cs, ncl, scl; - FRESULT res; - - - if (clst == 0) { /* Create a new chain */ - scl = fs->last_clust; /* Get suggested start point */ - if (!scl || scl >= fs->n_fatent) scl = 1; - } - else { /* Stretch the current chain */ - cs = get_fat(fs, clst); /* Check the cluster status */ - if (cs < 2) return 1; /* Invalid value */ - if (cs == 0xFFFFFFFF) return cs; /* A disk error occurred */ - if (cs < fs->n_fatent) return cs; /* It is already followed by next cluster */ - scl = clst; - } - - ncl = scl; /* Start cluster */ - for (;;) { - ncl++; /* Next cluster */ - if (ncl >= fs->n_fatent) { /* Check wrap around */ - ncl = 2; - if (ncl > scl) return 0; /* No free cluster */ - } - cs = get_fat(fs, ncl); /* Get the cluster status */ - if (cs == 0) break; /* Found a free cluster */ - if (cs == 0xFFFFFFFF || cs == 1)/* An error occurred */ - return cs; - if (ncl == scl) return 0; /* No free cluster */ - } - - res = put_fat(fs, ncl, 0x0FFFFFFF); /* Mark the new cluster "last link" */ - if (res == FR_OK && clst != 0) { - res = put_fat(fs, clst, ncl); /* Link it to the previous one if needed */ - } - if (res == FR_OK) { - fs->last_clust = ncl; /* Update FSINFO */ - if (fs->free_clust != 0xFFFFFFFF) { - fs->free_clust--; - fs->fsi_flag |= 1; - } - } else { - ncl = (res == FR_DISK_ERR) ? 0xFFFFFFFF : 1; - } - - return ncl; /* Return new cluster number or error code */ -} -#endif /* !_FS_READONLY */ - - - - -/*-----------------------------------------------------------------------*/ -/* FAT handling - Convert offset into cluster with link map table */ -/*-----------------------------------------------------------------------*/ - -#if _USE_FASTSEEK -static -DWORD clmt_clust ( /* <2:Error, >=2:Cluster number */ - FIL* fp, /* Pointer to the file object */ - DWORD ofs /* File offset to be converted to cluster# */ -) -{ - DWORD cl, ncl, *tbl; - - - tbl = fp->cltbl + 1; /* Top of CLMT */ - cl = ofs / SS(fp->fs) / fp->fs->csize; /* Cluster order from top of the file */ - for (;;) { - ncl = *tbl++; /* Number of cluters in the fragment */ - if (!ncl) return 0; /* End of table? (error) */ - if (cl < ncl) break; /* In this fragment? */ - cl -= ncl; tbl++; /* Next fragment */ - } - return cl + *tbl; /* Return the cluster number */ -} -#endif /* _USE_FASTSEEK */ - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Set directory index */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_sdi ( - DIR* dp, /* Pointer to directory object */ - UINT idx /* Index of directory table */ -) -{ - DWORD clst, sect; - UINT ic; - - - dp->index = (WORD)idx; /* Current index */ - clst = dp->sclust; /* Table start cluster (0:root) */ - if (clst == 1 || clst >= dp->fs->n_fatent) /* Check start cluster range */ - return FR_INT_ERR; - if (!clst && dp->fs->fs_type == FS_FAT32) /* Replace cluster# 0 with root cluster# if in FAT32 */ - clst = dp->fs->dirbase; - - if (clst == 0) { /* Static table (root-directory in FAT12/16) */ - if (idx >= dp->fs->n_rootdir) /* Is index out of range? */ - return FR_INT_ERR; - sect = dp->fs->dirbase; - } - else { /* Dynamic table (root-directory in FAT32 or sub-directory) */ - ic = SS(dp->fs) / SZ_DIR * dp->fs->csize; /* Entries per cluster */ - while (idx >= ic) { /* Follow cluster chain */ - clst = get_fat(dp->fs, clst); /* Get next cluster */ - if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */ - if (clst < 2 || clst >= dp->fs->n_fatent) /* Reached to end of table or internal error */ - return FR_INT_ERR; - idx -= ic; - } - sect = clust2sect(dp->fs, clst); - } - dp->clust = clst; /* Current cluster# */ - if (!sect) return FR_INT_ERR; - dp->sect = sect + idx / (SS(dp->fs) / SZ_DIR); /* Sector# of the directory entry */ - dp->dir = dp->fs->win + (idx % (SS(dp->fs) / SZ_DIR)) * SZ_DIR; /* Ptr to the entry in the sector */ - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Move directory table index next */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_next ( /* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:Could not stretch */ - DIR* dp, /* Pointer to the directory object */ - int stretch /* 0: Do not stretch table, 1: Stretch table if needed */ -) -{ - DWORD clst; - UINT i; - - - i = dp->index + 1; - if (!(i & 0xFFFF) || !dp->sect) /* Report EOT when index has reached 65535 */ - return FR_NO_FILE; - - if (!(i % (SS(dp->fs) / SZ_DIR))) { /* Sector changed? */ - dp->sect++; /* Next sector */ - - if (!dp->clust) { /* Static table */ - if (i >= dp->fs->n_rootdir) /* Report EOT if it reached end of static table */ - return FR_NO_FILE; - } - else { /* Dynamic table */ - if (((i / (SS(dp->fs) / SZ_DIR)) & (dp->fs->csize - 1)) == 0) { /* Cluster changed? */ - clst = get_fat(dp->fs, dp->clust); /* Get next cluster */ - if (clst <= 1) return FR_INT_ERR; - if (clst == 0xFFFFFFFF) return FR_DISK_ERR; - if (clst >= dp->fs->n_fatent) { /* If it reached end of dynamic table, */ -#if !_FS_READONLY - UINT c; - if (!stretch) return FR_NO_FILE; /* If do not stretch, report EOT */ - clst = create_chain(dp->fs, dp->clust); /* Stretch cluster chain */ - if (clst == 0) return FR_DENIED; /* No free cluster */ - if (clst == 1) return FR_INT_ERR; - if (clst == 0xFFFFFFFF) return FR_DISK_ERR; - /* Clean-up stretched table */ - if (sync_window(dp->fs)) return FR_DISK_ERR;/* Flush disk access window */ - mem_set(dp->fs->win, 0, SS(dp->fs)); /* Clear window buffer */ - dp->fs->winsect = clust2sect(dp->fs, clst); /* Cluster start sector */ - for (c = 0; c < dp->fs->csize; c++) { /* Fill the new cluster with 0 */ - dp->fs->wflag = 1; - if (sync_window(dp->fs)) return FR_DISK_ERR; - dp->fs->winsect++; - } - dp->fs->winsect -= c; /* Rewind window offset */ -#else - if (!stretch) return FR_NO_FILE; /* If do not stretch, report EOT (this is to suppress warning) */ - return FR_NO_FILE; /* Report EOT */ -#endif - } - dp->clust = clst; /* Initialize data for new cluster */ - dp->sect = clust2sect(dp->fs, clst); - } - } - } - - dp->index = (WORD)i; /* Current index */ - dp->dir = dp->fs->win + (i % (SS(dp->fs) / SZ_DIR)) * SZ_DIR; /* Current entry in the window */ - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Reserve directory entry */ -/*-----------------------------------------------------------------------*/ - -#if !_FS_READONLY -static -FRESULT dir_alloc ( - DIR* dp, /* Pointer to the directory object */ - UINT nent /* Number of contiguous entries to allocate (1-21) */ -) -{ - FRESULT res; - UINT n; - - - res = dir_sdi(dp, 0); - if (res == FR_OK) { - n = 0; - do { - res = move_window(dp->fs, dp->sect); - if (res != FR_OK) break; - if (dp->dir[0] == DDE || dp->dir[0] == 0) { /* Is it a free entry? */ - if (++n == nent) break; /* A block of contiguous free entries is found */ - } else { - n = 0; /* Not a blank entry. Restart to search */ - } - res = dir_next(dp, 1); /* Next entry with table stretch enabled */ - } while (res == FR_OK); - } - if (res == FR_NO_FILE) res = FR_DENIED; /* No directory entry to allocate */ - return res; -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Load/Store start cluster number */ -/*-----------------------------------------------------------------------*/ - -static -DWORD ld_clust ( - FATFS* fs, /* Pointer to the fs object */ - BYTE* dir /* Pointer to the directory entry */ -) -{ - DWORD cl; - - cl = LD_WORD(dir+DIR_FstClusLO); - if (fs->fs_type == FS_FAT32) - cl |= (DWORD)LD_WORD(dir+DIR_FstClusHI) << 16; - - return cl; -} - - -#if !_FS_READONLY -static -void st_clust ( - BYTE* dir, /* Pointer to the directory entry */ - DWORD cl /* Value to be set */ -) -{ - ST_WORD(dir+DIR_FstClusLO, cl); - ST_WORD(dir+DIR_FstClusHI, cl >> 16); -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* LFN handling - Test/Pick/Fit an LFN segment from/to directory entry */ -/*-----------------------------------------------------------------------*/ -#if _USE_LFN -static -const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30}; /* Offset of LFN characters in the directory entry */ - - -static -int cmp_lfn ( /* 1:Matched, 0:Not matched */ - WCHAR* lfnbuf, /* Pointer to the LFN to be compared */ - BYTE* dir /* Pointer to the directory entry containing a part of LFN */ -) -{ - UINT i, s; - WCHAR wc, uc; - - - i = ((dir[LDIR_Ord] & ~LLE) - 1) * 13; /* Get offset in the LFN buffer */ - s = 0; wc = 1; - do { - uc = LD_WORD(dir+LfnOfs[s]); /* Pick an LFN character from the entry */ - if (wc) { /* Last character has not been processed */ - wc = ff_wtoupper(uc); /* Convert it to upper case */ - if (i >= _MAX_LFN || wc != ff_wtoupper(lfnbuf[i++])) /* Compare it */ - return 0; /* Not matched */ - } else { - if (uc != 0xFFFF) return 0; /* Check filler */ - } - } while (++s < 13); /* Repeat until all characters in the entry are checked */ - - if ((dir[LDIR_Ord] & LLE) && wc && lfnbuf[i]) /* Last segment matched but different length */ - return 0; - - return 1; /* The part of LFN matched */ -} - - - -static -int pick_lfn ( /* 1:Succeeded, 0:Buffer overflow */ - WCHAR* lfnbuf, /* Pointer to the Unicode-LFN buffer */ - BYTE* dir /* Pointer to the directory entry */ -) -{ - UINT i, s; - WCHAR wc, uc; - - - i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13; /* Offset in the LFN buffer */ - - s = 0; wc = 1; - do { - uc = LD_WORD(dir+LfnOfs[s]); /* Pick an LFN character from the entry */ - if (wc) { /* Last character has not been processed */ - if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ - lfnbuf[i++] = wc = uc; /* Store it */ - } else { - if (uc != 0xFFFF) return 0; /* Check filler */ - } - } while (++s < 13); /* Read all character in the entry */ - - if (dir[LDIR_Ord] & LLE) { /* Put terminator if it is the last LFN part */ - if (i >= _MAX_LFN) return 0; /* Buffer overflow? */ - lfnbuf[i] = 0; - } - - return 1; -} - - -#if !_FS_READONLY -static -void fit_lfn ( - const WCHAR* lfnbuf, /* Pointer to the LFN buffer */ - BYTE* dir, /* Pointer to the directory entry */ - BYTE ord, /* LFN order (1-20) */ - BYTE sum /* SFN sum */ -) -{ - UINT i, s; - WCHAR wc; - - - dir[LDIR_Chksum] = sum; /* Set check sum */ - dir[LDIR_Attr] = AM_LFN; /* Set attribute. LFN entry */ - dir[LDIR_Type] = 0; - ST_WORD(dir+LDIR_FstClusLO, 0); - - i = (ord - 1) * 13; /* Get offset in the LFN buffer */ - s = wc = 0; - do { - if (wc != 0xFFFF) wc = lfnbuf[i++]; /* Get an effective character */ - ST_WORD(dir+LfnOfs[s], wc); /* Put it */ - if (!wc) wc = 0xFFFF; /* Padding characters following last character */ - } while (++s < 13); - if (wc == 0xFFFF || !lfnbuf[i]) ord |= LLE; /* Bottom LFN part is the start of LFN sequence */ - dir[LDIR_Ord] = ord; /* Set the LFN order */ -} - -#endif -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* Create numbered name */ -/*-----------------------------------------------------------------------*/ -#if _USE_LFN -static -void gen_numname ( - BYTE* dst, /* Pointer to the buffer to store numbered SFN */ - const BYTE* src, /* Pointer to SFN */ - const WCHAR* lfn, /* Pointer to LFN */ - UINT seq /* Sequence number */ -) -{ - BYTE ns[8], c; - UINT i, j; - - - mem_cpy(dst, src, 11); - - if (seq > 5) { /* On many collisions, generate a hash number instead of sequential number */ - WCHAR wc; - DWORD sr = seq; - - while (*lfn) { /* Create a CRC */ - wc = *lfn++; - for (i = 0; i < 16; i++) { - sr = (sr << 1) + (wc & 1); - wc >>= 1; - if (sr & 0x10000) sr ^= 0x11021; - } - } - seq = (UINT)sr; - } - - /* itoa (hexdecimal) */ - i = 7; - do { - c = (seq % 16) + '0'; - if (c > '9') c += 7; - ns[i--] = c; - seq /= 16; - } while (seq); - ns[i] = '~'; - - /* Append the number */ - for (j = 0; j < i && dst[j] != ' '; j++) { - if (IsDBCS1(dst[j])) { - if (j == i - 1) break; - j++; - } - } - do { - dst[j++] = (i < 8) ? ns[i++] : ' '; - } while (j < 8); -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* Calculate sum of an SFN */ -/*-----------------------------------------------------------------------*/ -#if _USE_LFN -static -BYTE sum_sfn ( - const BYTE* dir /* Pointer to the SFN entry */ -) -{ - BYTE sum = 0; - UINT n = 11; - - do sum = (sum >> 1) + (sum << 7) + *dir++; while (--n); - return sum; -} -#endif - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Find an object in the directory */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_find ( - DIR* dp /* Pointer to the directory object linked to the file name */ -) -{ - FRESULT res; - BYTE c, *dir; -#if _USE_LFN - BYTE a, ord, sum; -#endif - - res = dir_sdi(dp, 0); /* Rewind directory object */ - if (res != FR_OK) return res; - -#if _USE_LFN - ord = sum = 0xFF; dp->lfn_idx = 0xFFFF; /* Reset LFN sequence */ -#endif - do { - res = move_window(dp->fs, dp->sect); - if (res != FR_OK) break; - dir = dp->dir; /* Ptr to the directory entry of current index */ - c = dir[DIR_Name]; - if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ -#if _USE_LFN /* LFN configuration */ - a = dir[DIR_Attr] & AM_MASK; - if (c == DDE || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */ - ord = 0xFF; dp->lfn_idx = 0xFFFF; /* Reset LFN sequence */ - } else { - if (a == AM_LFN) { /* An LFN entry is found */ - if (dp->lfn) { - if (c & LLE) { /* Is it start of LFN sequence? */ - sum = dir[LDIR_Chksum]; - c &= ~LLE; ord = c; /* LFN start order */ - dp->lfn_idx = dp->index; /* Start index of LFN */ - } - /* Check validity of the LFN entry and compare it with given name */ - ord = (c == ord && sum == dir[LDIR_Chksum] && cmp_lfn(dp->lfn, dir)) ? ord - 1 : 0xFF; - } - } else { /* An SFN entry is found */ - if (!ord && sum == sum_sfn(dir)) break; /* LFN matched? */ - if (!(dp->fn[NSFLAG] & NS_LOSS) && !mem_cmp(dir, dp->fn, 11)) break; /* SFN matched? */ - ord = 0xFF; dp->lfn_idx = 0xFFFF; /* Reset LFN sequence */ - } - } -#else /* Non LFN configuration */ - if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dp->fn, 11)) /* Is it a valid entry? */ - break; -#endif - res = dir_next(dp, 0); /* Next entry */ - } while (res == FR_OK); - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read an object from the directory */ -/*-----------------------------------------------------------------------*/ -#if _FS_MINIMIZE <= 1 || _USE_LABEL || _FS_RPATH >= 2 -static -FRESULT dir_read ( - DIR* dp, /* Pointer to the directory object */ - int vol /* Filtered by 0:file/directory or 1:volume label */ -) -{ - FRESULT res; - BYTE a, c, *dir; -#if _USE_LFN - BYTE ord = 0xFF, sum = 0xFF; -#endif - - res = FR_NO_FILE; - while (dp->sect) { - res = move_window(dp->fs, dp->sect); - if (res != FR_OK) break; - dir = dp->dir; /* Ptr to the directory entry of current index */ - c = dir[DIR_Name]; - if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ - a = dir[DIR_Attr] & AM_MASK; -#if _USE_LFN /* LFN configuration */ - if (c == DDE || (!_FS_RPATH && c == '.') || (int)((a & ~AM_ARC) == AM_VOL) != vol) { /* An entry without valid data */ - ord = 0xFF; - } else { - if (a == AM_LFN) { /* An LFN entry is found */ - if (c & LLE) { /* Is it start of LFN sequence? */ - sum = dir[LDIR_Chksum]; - c &= ~LLE; ord = c; - dp->lfn_idx = dp->index; - } - /* Check LFN validity and capture it */ - ord = (c == ord && sum == dir[LDIR_Chksum] && pick_lfn(dp->lfn, dir)) ? ord - 1 : 0xFF; - } else { /* An SFN entry is found */ - if (ord || sum != sum_sfn(dir)) /* Is there a valid LFN? */ - dp->lfn_idx = 0xFFFF; /* It has no LFN. */ - break; - } - } -#else /* Non LFN configuration */ - if (c != DDE && (_FS_RPATH || c != '.') && a != AM_LFN && (int)((a & ~AM_ARC) == AM_VOL) == vol) /* Is it a valid entry? */ - break; -#endif - res = dir_next(dp, 0); /* Next entry */ - if (res != FR_OK) break; - } - - if (res != FR_OK) dp->sect = 0; - - return res; -} -#endif /* _FS_MINIMIZE <= 1 || _USE_LABEL || _FS_RPATH >= 2 */ - - - - -/*-----------------------------------------------------------------------*/ -/* Register an object to the directory */ -/*-----------------------------------------------------------------------*/ -#if !_FS_READONLY -static -FRESULT dir_register ( /* FR_OK:Successful, FR_DENIED:No free entry or too many SFN collision, FR_DISK_ERR:Disk error */ - DIR* dp /* Target directory with object name to be created */ -) -{ - FRESULT res; -#if _USE_LFN /* LFN configuration */ - UINT n, nent; - BYTE sn[12], *fn, sum; - WCHAR *lfn; - - - fn = dp->fn; lfn = dp->lfn; - mem_cpy(sn, fn, 12); - - if (_FS_RPATH && (sn[NSFLAG] & NS_DOT)) /* Cannot create dot entry */ - return FR_INVALID_NAME; - - if (sn[NSFLAG] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */ - fn[NSFLAG] = 0; dp->lfn = 0; /* Find only SFN */ - for (n = 1; n < 100; n++) { - gen_numname(fn, sn, lfn, n); /* Generate a numbered name */ - res = dir_find(dp); /* Check if the name collides with existing SFN */ - if (res != FR_OK) break; - } - if (n == 100) return FR_DENIED; /* Abort if too many collisions */ - if (res != FR_NO_FILE) return res; /* Abort if the result is other than 'not collided' */ - fn[NSFLAG] = sn[NSFLAG]; dp->lfn = lfn; - } - - if (sn[NSFLAG] & NS_LFN) { /* When LFN is to be created, allocate entries for an SFN + LFNs. */ - for (n = 0; lfn[n]; n++) ; - nent = (n + 25) / 13; - } else { /* Otherwise allocate an entry for an SFN */ - nent = 1; - } - res = dir_alloc(dp, nent); /* Allocate entries */ - - if (res == FR_OK && --nent) { /* Set LFN entry if needed */ - res = dir_sdi(dp, dp->index - nent); - if (res == FR_OK) { - sum = sum_sfn(dp->fn); /* Sum value of the SFN tied to the LFN */ - do { /* Store LFN entries in bottom first */ - res = move_window(dp->fs, dp->sect); - if (res != FR_OK) break; - fit_lfn(dp->lfn, dp->dir, (BYTE)nent, sum); - dp->fs->wflag = 1; - res = dir_next(dp, 0); /* Next entry */ - } while (res == FR_OK && --nent); - } - } -#else /* Non LFN configuration */ - res = dir_alloc(dp, 1); /* Allocate an entry for SFN */ -#endif - - if (res == FR_OK) { /* Set SFN entry */ - res = move_window(dp->fs, dp->sect); - if (res == FR_OK) { - mem_set(dp->dir, 0, SZ_DIR); /* Clean the entry */ - mem_cpy(dp->dir, dp->fn, 11); /* Put SFN */ -#if _USE_LFN - dp->dir[DIR_NTres] = dp->fn[NSFLAG] & (NS_BODY | NS_EXT); /* Put NT flag */ -#endif - dp->fs->wflag = 1; - } - } - - return res; -} -#endif /* !_FS_READONLY */ - - - - -/*-----------------------------------------------------------------------*/ -/* Remove an object from the directory */ -/*-----------------------------------------------------------------------*/ -#if !_FS_READONLY && !_FS_MINIMIZE -static -FRESULT dir_remove ( /* FR_OK: Successful, FR_DISK_ERR: A disk error */ - DIR* dp /* Directory object pointing the entry to be removed */ -) -{ - FRESULT res; -#if _USE_LFN /* LFN configuration */ - UINT i; - - i = dp->index; /* SFN index */ - res = dir_sdi(dp, (dp->lfn_idx == 0xFFFF) ? i : dp->lfn_idx); /* Goto the SFN or top of the LFN entries */ - if (res == FR_OK) { - do { - res = move_window(dp->fs, dp->sect); - if (res != FR_OK) break; - mem_set(dp->dir, 0, SZ_DIR); /* Clear and mark the entry "deleted" */ - *dp->dir = DDE; - dp->fs->wflag = 1; - if (dp->index >= i) break; /* When reached SFN, all entries of the object has been deleted. */ - res = dir_next(dp, 0); /* Next entry */ - } while (res == FR_OK); - if (res == FR_NO_FILE) res = FR_INT_ERR; - } - -#else /* Non LFN configuration */ - res = dir_sdi(dp, dp->index); - if (res == FR_OK) { - res = move_window(dp->fs, dp->sect); - if (res == FR_OK) { - mem_set(dp->dir, 0, SZ_DIR); /* Clear and mark the entry "deleted" */ - *dp->dir = DDE; - dp->fs->wflag = 1; - } - } -#endif - - return res; -} -#endif /* !_FS_READONLY */ - - - - -/*-----------------------------------------------------------------------*/ -/* Get file information from directory entry */ -/*-----------------------------------------------------------------------*/ -#if _FS_MINIMIZE <= 1 || _FS_RPATH >= 2 -static -void get_fileinfo ( /* No return code */ - DIR* dp, /* Pointer to the directory object */ - FILINFO* fno /* Pointer to the file information to be filled */ -) -{ - UINT i; - TCHAR *p, c; - - - p = fno->fname; - if (dp->sect) { /* Get SFN */ - BYTE *dir = dp->dir; - - i = 0; - while (i < 11) { /* Copy name body and extension */ - c = (TCHAR)dir[i++]; - if (c == ' ') continue; /* Skip padding spaces */ - if (c == NDDE) c = (TCHAR)DDE; /* Restore replaced DDE character */ - if (i == 9) *p++ = '.'; /* Insert a . if extension is exist */ -#if _USE_LFN - if (IsUpper(c) && (dir[DIR_NTres] & (i >= 9 ? NS_EXT : NS_BODY))) - c += 0x20; /* To lower */ -#if _LFN_UNICODE - if (IsDBCS1(c) && i != 8 && i != 11 && IsDBCS2(dir[i])) - c = c << 8 | dir[i++]; - c = ff_convert(c, 1); /* OEM -> Unicode */ - if (!c) c = '?'; -#endif -#endif - *p++ = c; - } - fno->fattrib = dir[DIR_Attr]; /* Attribute */ - fno->fsize = LD_DWORD(dir+DIR_FileSize); /* Size */ - fno->fdate = LD_WORD(dir+DIR_WrtDate); /* Date */ - fno->ftime = LD_WORD(dir+DIR_WrtTime); /* Time */ - } - *p = 0; /* Terminate SFN string by a \0 */ - -#if _USE_LFN - if (fno->lfname) { - WCHAR w, *lfn; - - i = 0; p = fno->lfname; - if (dp->sect && fno->lfsize && dp->lfn_idx != 0xFFFF) { /* Get LFN if available */ - lfn = dp->lfn; - while ((w = *lfn++) != 0) { /* Get an LFN character */ -#if !_LFN_UNICODE - w = ff_convert(w, 0); /* Unicode -> OEM */ - if (!w) { i = 0; break; } /* No LFN if it could not be converted */ - if (_DF1S && w >= 0x100) /* Put 1st byte if it is a DBC (always false on SBCS cfg) */ - p[i++] = (TCHAR)(w >> 8); -#endif - if (i >= fno->lfsize - 1) { i = 0; break; } /* No LFN if buffer overflow */ - p[i++] = (TCHAR)w; - } - } - p[i] = 0; /* Terminate LFN string by a \0 */ - } -#endif -} -#endif /* _FS_MINIMIZE <= 1 || _FS_RPATH >= 2*/ - - - - -/*-----------------------------------------------------------------------*/ -/* Pick a segment and create the object name in directory form */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT create_name ( - DIR* dp, /* Pointer to the directory object */ - const TCHAR** path /* Pointer to pointer to the segment in the path string */ -) -{ -#if _USE_LFN /* LFN configuration */ - BYTE b, cf; - WCHAR w, *lfn; - UINT i, ni, si, di; - const TCHAR *p; - - /* Create LFN in Unicode */ - for (p = *path; *p == '/' || *p == '\\'; p++) ; /* Strip duplicated separator */ - lfn = dp->lfn; - si = di = 0; - for (;;) { - w = p[si++]; /* Get a character */ - if (w < ' ' || w == '/' || w == '\\') break; /* Break on end of segment */ - if (di >= _MAX_LFN) /* Reject too long name */ - return FR_INVALID_NAME; -#if !_LFN_UNICODE - w &= 0xFF; - if (IsDBCS1(w)) { /* Check if it is a DBC 1st byte (always false on SBCS cfg) */ - b = (BYTE)p[si++]; /* Get 2nd byte */ - if (!IsDBCS2(b)) - return FR_INVALID_NAME; /* Reject invalid sequence */ - w = (w << 8) + b; /* Create a DBC */ - } - w = ff_convert(w, 1); /* Convert ANSI/OEM to Unicode */ - if (!w) return FR_INVALID_NAME; /* Reject invalid code */ -#endif - if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) /* Reject illegal characters for LFN */ - return FR_INVALID_NAME; - lfn[di++] = w; /* Store the Unicode character */ - } - *path = &p[si]; /* Return pointer to the next segment */ - cf = (w < ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */ -#if _FS_RPATH - if ((di == 1 && lfn[di-1] == '.') || /* Is this a dot entry? */ - (di == 2 && lfn[di-1] == '.' && lfn[di-2] == '.')) { - lfn[di] = 0; - for (i = 0; i < 11; i++) - dp->fn[i] = (i < di) ? '.' : ' '; - dp->fn[i] = cf | NS_DOT; /* This is a dot entry */ - return FR_OK; - } -#endif - while (di) { /* Strip trailing spaces and dots */ - w = lfn[di-1]; - if (w != ' ' && w != '.') break; - di--; - } - if (!di) return FR_INVALID_NAME; /* Reject nul string */ - - lfn[di] = 0; /* LFN is created */ - - /* Create SFN in directory form */ - mem_set(dp->fn, ' ', 11); - for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ; /* Strip leading spaces and dots */ - if (si) cf |= NS_LOSS | NS_LFN; - while (di && lfn[di - 1] != '.') di--; /* Find extension (di<=si: no extension) */ - - b = i = 0; ni = 8; - for (;;) { - w = lfn[si++]; /* Get an LFN character */ - if (!w) break; /* Break on end of the LFN */ - if (w == ' ' || (w == '.' && si != di)) { /* Remove spaces and dots */ - cf |= NS_LOSS | NS_LFN; continue; - } - - if (i >= ni || si == di) { /* Extension or end of SFN */ - if (ni == 11) { /* Long extension */ - cf |= NS_LOSS | NS_LFN; break; - } - if (si != di) cf |= NS_LOSS | NS_LFN; /* Out of 8.3 format */ - if (si > di) break; /* No extension */ - si = di; i = 8; ni = 11; /* Enter extension section */ - b <<= 2; continue; - } - - if (w >= 0x80) { /* Non ASCII character */ -#ifdef _EXCVT - w = ff_convert(w, 0); /* Unicode -> OEM code */ - if (w) w = ExCvt[w - 0x80]; /* Convert extended character to upper (SBCS) */ -#else - w = ff_convert(ff_wtoupper(w), 0); /* Upper converted Unicode -> OEM code */ -#endif - cf |= NS_LFN; /* Force create LFN entry */ - } - - if (_DF1S && w >= 0x100) { /* Double byte character (always false on SBCS cfg) */ - if (i >= ni - 1) { - cf |= NS_LOSS | NS_LFN; i = ni; continue; - } - dp->fn[i++] = (BYTE)(w >> 8); - } else { /* Single byte character */ - if (!w || chk_chr("+,;=[]", w)) { /* Replace illegal characters for SFN */ - w = '_'; cf |= NS_LOSS | NS_LFN;/* Lossy conversion */ - } else { - if (IsUpper(w)) { /* ASCII large capital */ - b |= 2; - } else { - if (IsLower(w)) { /* ASCII small capital */ - b |= 1; w -= 0x20; - } - } - } - } - dp->fn[i++] = (BYTE)w; - } - - if (dp->fn[0] == DDE) dp->fn[0] = NDDE; /* If the first character collides with deleted mark, replace it with 0x05 */ - - if (ni == 8) b <<= 2; - if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03) /* Create LFN entry when there are composite capitals */ - cf |= NS_LFN; - if (!(cf & NS_LFN)) { /* When LFN is in 8.3 format without extended character, NT flags are created */ - if ((b & 0x03) == 0x01) cf |= NS_EXT; /* NT flag (Extension has only small capital) */ - if ((b & 0x0C) == 0x04) cf |= NS_BODY; /* NT flag (Filename has only small capital) */ - } - - dp->fn[NSFLAG] = cf; /* SFN is created */ - - return FR_OK; - - -#else /* Non-LFN configuration */ - BYTE b, c, d, *sfn; - UINT ni, si, i; - const char *p; - - /* Create file name in directory form */ - for (p = *path; *p == '/' || *p == '\\'; p++) ; /* Strip duplicated separator */ - sfn = dp->fn; - mem_set(sfn, ' ', 11); - si = i = b = 0; ni = 8; -#if _FS_RPATH - if (p[si] == '.') { /* Is this a dot entry? */ - for (;;) { - c = (BYTE)p[si++]; - if (c != '.' || si >= 3) break; - sfn[i++] = c; - } - if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME; - *path = &p[si]; /* Return pointer to the next segment */ - sfn[NSFLAG] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of path */ - return FR_OK; - } -#endif - for (;;) { - c = (BYTE)p[si++]; - if (c <= ' ' || c == '/' || c == '\\') break; /* Break on end of segment */ - if (c == '.' || i >= ni) { - if (ni != 8 || c != '.') return FR_INVALID_NAME; - i = 8; ni = 11; - b <<= 2; continue; - } - if (c >= 0x80) { /* Extended character? */ - b |= 3; /* Eliminate NT flag */ -#ifdef _EXCVT - c = ExCvt[c - 0x80]; /* To upper extended characters (SBCS cfg) */ -#else -#if !_DF1S - return FR_INVALID_NAME; /* Reject extended characters (ASCII cfg) */ -#endif -#endif - } - if (IsDBCS1(c)) { /* Check if it is a DBC 1st byte (always false on SBCS cfg) */ - d = (BYTE)p[si++]; /* Get 2nd byte */ - if (!IsDBCS2(d) || i >= ni - 1) /* Reject invalid DBC */ - return FR_INVALID_NAME; - sfn[i++] = c; - sfn[i++] = d; - } else { /* Single byte code */ - if (chk_chr("\"*+,:;<=>\?[]|\x7F", c)) /* Reject illegal chrs for SFN */ - return FR_INVALID_NAME; - if (IsUpper(c)) { /* ASCII large capital? */ - b |= 2; - } else { - if (IsLower(c)) { /* ASCII small capital? */ - b |= 1; c -= 0x20; - } - } - sfn[i++] = c; - } - } - *path = &p[si]; /* Return pointer to the next segment */ - c = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */ - - if (!i) return FR_INVALID_NAME; /* Reject nul string */ - if (sfn[0] == DDE) sfn[0] = NDDE; /* When first character collides with DDE, replace it with 0x05 */ - - if (ni == 8) b <<= 2; - if ((b & 0x03) == 0x01) c |= NS_EXT; /* NT flag (Name extension has only small capital) */ - if ((b & 0x0C) == 0x04) c |= NS_BODY; /* NT flag (Name body has only small capital) */ - - sfn[NSFLAG] = c; /* Store NT flag, File name is created */ - - return FR_OK; -#endif -} - - - - -/*-----------------------------------------------------------------------*/ -/* Follow a file path */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ - DIR* dp, /* Directory object to return last directory and found object */ - const TCHAR* path /* Full-path string to find a file or directory */ -) -{ - FRESULT res; - BYTE *dir, ns; - - -#if _FS_RPATH - if (*path == '/' || *path == '\\') { /* There is a heading separator */ - path++; dp->sclust = 0; /* Strip it and start from the root directory */ - } else { /* No heading separator */ - dp->sclust = dp->fs->cdir; /* Start from the current directory */ - } -#else - if (*path == '/' || *path == '\\') /* Strip heading separator if exist */ - path++; - dp->sclust = 0; /* Always start from the root directory */ -#endif - - if ((UINT)*path < ' ') { /* Null path name is the origin directory itself */ - res = dir_sdi(dp, 0); - dp->dir = 0; - } else { /* Follow path */ - for (;;) { - res = create_name(dp, &path); /* Get a segment name of the path */ - if (res != FR_OK) break; - res = dir_find(dp); /* Find an object with the sagment name */ - ns = dp->fn[NSFLAG]; - if (res != FR_OK) { /* Failed to find the object */ - if (res == FR_NO_FILE) { /* Object is not found */ - if (_FS_RPATH && (ns & NS_DOT)) { /* If dot entry is not exist, */ - dp->sclust = 0; dp->dir = 0; /* it is the root directory and stay there */ - if (!(ns & NS_LAST)) continue; /* Continue to follow if not last segment */ - res = FR_OK; /* Ended at the root directroy. Function completed. */ - } else { /* Could not find the object */ - if (!(ns & NS_LAST)) res = FR_NO_PATH; /* Adjust error code if not last segment */ - } - } - break; - } - if (ns & NS_LAST) break; /* Last segment matched. Function completed. */ - dir = dp->dir; /* Follow the sub-directory */ - if (!(dir[DIR_Attr] & AM_DIR)) { /* It is not a sub-directory and cannot follow */ - res = FR_NO_PATH; break; - } - dp->sclust = ld_clust(dp->fs, dir); - } - } - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Get logical drive number from path name */ -/*-----------------------------------------------------------------------*/ - -static -int get_ldnumber ( /* Returns logical drive number (-1:invalid drive) */ - const TCHAR** path /* Pointer to pointer to the path name */ -) -{ - const TCHAR *tp, *tt; - UINT i; - int vol = -1; - - - if (*path) { /* If the pointer is not a null */ - for (tt = *path; (UINT)*tt >= (_USE_LFN ? ' ' : '!') && *tt != ':'; tt++) ; /* Find ':' in the path */ - if (*tt == ':') { /* If a ':' is exist in the path name */ - tp = *path; - i = *tp++ - '0'; - if (i < 10 && tp == tt) { /* Is there a numeric drive id? */ - if (i < _VOLUMES) { /* If a drive id is found, get the value and strip it */ - vol = (int)i; - *path = ++tt; - } - } else { /* No numeric drive number */ -#if _STR_VOLUME_ID /* Find string drive id */ - static const char* const str[] = {_VOLUME_STRS}; - const char *sp; - char c; - TCHAR tc; - - i = 0; tt++; - do { - sp = str[i]; tp = *path; - do { /* Compare a string drive id with path name */ - c = *sp++; tc = *tp++; - if (IsLower(tc)) tc -= 0x20; - } while (c && (TCHAR)c == tc); - } while ((c || tp != tt) && ++i < _VOLUMES); /* Repeat for each id until pattern match */ - if (i < _VOLUMES) { /* If a drive id is found, get the value and strip it */ - vol = (int)i; - *path = tt; - } -#endif - } - return vol; - } -#if _FS_RPATH && _VOLUMES >= 2 - vol = CurrVol; /* Current drive */ -#else - vol = 0; /* Drive 0 */ -#endif - } - return vol; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Load a sector and check if it is an FAT boot sector */ -/*-----------------------------------------------------------------------*/ - -static -BYTE check_fs ( /* 0:FAT boor sector, 1:Valid boor sector but not FAT, 2:Not a boot sector, 3:Disk error */ - FATFS* fs, /* File system object */ - DWORD sect /* Sector# (lba) to check if it is an FAT boot record or not */ -) -{ - fs->wflag = 0; fs->winsect = 0xFFFFFFFF; /* Invaidate window */ - if (move_window(fs, sect) != FR_OK) /* Load boot record */ - return 3; - - if (LD_WORD(&fs->win[BS_55AA]) != 0xAA55) /* Check boot record signature (always placed at offset 510 even if the sector size is >512) */ - return 2; - - if ((LD_DWORD(&fs->win[BS_FilSysType]) & 0xFFFFFF) == 0x544146) /* Check "FAT" string */ - return 0; - if ((LD_DWORD(&fs->win[BS_FilSysType32]) & 0xFFFFFF) == 0x544146) /* Check "FAT" string */ - return 0; - - return 1; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Find logical drive and check if the volume is mounted */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT find_volume ( /* FR_OK(0): successful, !=0: any error occurred */ - FATFS** rfs, /* Pointer to pointer to the found file system object */ - const TCHAR** path, /* Pointer to pointer to the path name (drive number) */ - BYTE wmode /* !=0: Check write protection for write access */ -) -{ - BYTE fmt; - int vol; - DSTATUS stat; - DWORD bsect, fasize, tsect, sysect, nclst, szbfat; - WORD nrsv; - FATFS *fs; - - - /* Get logical drive number from the path name */ - *rfs = 0; - vol = get_ldnumber(path); - if (vol < 0) return FR_INVALID_DRIVE; - - /* Check if the file system object is valid or not */ - fs = FatFs[vol]; /* Get pointer to the file system object */ - if (!fs) return FR_NOT_ENABLED; /* Is the file system object available? */ - - ENTER_FF(fs); /* Lock the volume */ - *rfs = fs; /* Return pointer to the file system object */ - - if (fs->fs_type) { /* If the volume has been mounted */ - stat = disk_status(fs->drv); - if (!(stat & STA_NOINIT)) { /* and the physical drive is kept initialized */ - if (!_FS_READONLY && wmode && (stat & STA_PROTECT)) /* Check write protection if needed */ - return FR_WRITE_PROTECTED; - return FR_OK; /* The file system object is valid */ - } - } - - /* The file system object is not valid. */ - /* Following code attempts to mount the volume. (analyze BPB and initialize the fs object) */ - - fs->fs_type = 0; /* Clear the file system object */ - fs->drv = LD2PD(vol); /* Bind the logical drive and a physical drive */ - stat = disk_initialize(fs->drv); /* Initialize the physical drive */ - if (stat & STA_NOINIT) /* Check if the initialization succeeded */ - return FR_NOT_READY; /* Failed to initialize due to no medium or hard error */ - if (!_FS_READONLY && wmode && (stat & STA_PROTECT)) /* Check disk write protection if needed */ - return FR_WRITE_PROTECTED; -#if _MAX_SS != _MIN_SS /* Get sector size (multiple sector size cfg only) */ - if (disk_ioctl(fs->drv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK - || SS(fs) < _MIN_SS || SS(fs) > _MAX_SS) return FR_DISK_ERR; -#endif - /* Find an FAT partition on the drive. Supports only generic partitioning, FDISK and SFD. */ - bsect = 0; - fmt = check_fs(fs, bsect); /* Load sector 0 and check if it is an FAT boot sector as SFD */ - if (fmt == 1 || (!fmt && (LD2PT(vol)))) { /* Not an FAT boot sector or forced partition number */ - UINT i; - DWORD br[4]; - - for (i = 0; i < 4; i++) { /* Get partition offset */ - BYTE *pt = fs->win+MBR_Table + i * SZ_PTE; - br[i] = pt[4] ? LD_DWORD(&pt[8]) : 0; - } - i = LD2PT(vol); /* Partition number: 0:auto, 1-4:forced */ - if (i) i--; - do { /* Find an FAT volume */ - bsect = br[i]; - fmt = bsect ? check_fs(fs, bsect) : 2; /* Check the partition */ - } while (!LD2PT(vol) && fmt && ++i < 4); - } - if (fmt == 3) return FR_DISK_ERR; /* An error occured in the disk I/O layer */ - if (fmt) return FR_NO_FILESYSTEM; /* No FAT volume is found */ - - /* An FAT volume is found. Following code initializes the file system object */ - - if (LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs)) /* (BPB_BytsPerSec must be equal to the physical sector size) */ - return FR_NO_FILESYSTEM; - - fasize = LD_WORD(fs->win+BPB_FATSz16); /* Number of sectors per FAT */ - if (!fasize) fasize = LD_DWORD(fs->win+BPB_FATSz32); - fs->fsize = fasize; - - fs->n_fats = fs->win[BPB_NumFATs]; /* Number of FAT copies */ - if (fs->n_fats != 1 && fs->n_fats != 2) /* (Must be 1 or 2) */ - return FR_NO_FILESYSTEM; - fasize *= fs->n_fats; /* Number of sectors for FAT area */ - - fs->csize = fs->win[BPB_SecPerClus]; /* Number of sectors per cluster */ - if (!fs->csize || (fs->csize & (fs->csize - 1))) /* (Must be power of 2) */ - return FR_NO_FILESYSTEM; - - fs->n_rootdir = LD_WORD(fs->win+BPB_RootEntCnt); /* Number of root directory entries */ - if (fs->n_rootdir % (SS(fs) / SZ_DIR)) /* (Must be sector aligned) */ - return FR_NO_FILESYSTEM; - - tsect = LD_WORD(fs->win+BPB_TotSec16); /* Number of sectors on the volume */ - if (!tsect) tsect = LD_DWORD(fs->win+BPB_TotSec32); - - nrsv = LD_WORD(fs->win+BPB_RsvdSecCnt); /* Number of reserved sectors */ - if (!nrsv) return FR_NO_FILESYSTEM; /* (Must not be 0) */ - - /* Determine the FAT sub type */ - sysect = nrsv + fasize + fs->n_rootdir / (SS(fs) / SZ_DIR); /* RSV+FAT+DIR */ - if (tsect < sysect) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ - nclst = (tsect - sysect) / fs->csize; /* Number of clusters */ - if (!nclst) return FR_NO_FILESYSTEM; /* (Invalid volume size) */ - fmt = FS_FAT12; - if (nclst >= MIN_FAT16) fmt = FS_FAT16; - if (nclst >= MIN_FAT32) fmt = FS_FAT32; - - /* Boundaries and Limits */ - fs->n_fatent = nclst + 2; /* Number of FAT entries */ - fs->volbase = bsect; /* Volume start sector */ - fs->fatbase = bsect + nrsv; /* FAT start sector */ - fs->database = bsect + sysect; /* Data start sector */ - if (fmt == FS_FAT32) { - if (fs->n_rootdir) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must be 0) */ - fs->dirbase = LD_DWORD(fs->win+BPB_RootClus); /* Root directory start cluster */ - szbfat = fs->n_fatent * 4; /* (Needed FAT size) */ - } else { - if (!fs->n_rootdir) return FR_NO_FILESYSTEM; /* (BPB_RootEntCnt must not be 0) */ - fs->dirbase = fs->fatbase + fasize; /* Root directory start sector */ - szbfat = (fmt == FS_FAT16) ? /* (Needed FAT size) */ - fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1); - } - if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs)) /* (BPB_FATSz must not be less than the size needed) */ - return FR_NO_FILESYSTEM; - -#if !_FS_READONLY - /* Initialize cluster allocation information */ - fs->last_clust = fs->free_clust = 0xFFFFFFFF; - - /* Get fsinfo if available */ - fs->fsi_flag = 0x80; -#if (_FS_NOFSINFO & 3) != 3 - if (fmt == FS_FAT32 /* Enable FSINFO only if FAT32 and BPB_FSInfo is 1 */ - && LD_WORD(fs->win+BPB_FSInfo) == 1 - && move_window(fs, bsect + 1) == FR_OK) - { - fs->fsi_flag = 0; - if (LD_WORD(fs->win+BS_55AA) == 0xAA55 /* Load FSINFO data if available */ - && LD_DWORD(fs->win+FSI_LeadSig) == 0x41615252 - && LD_DWORD(fs->win+FSI_StrucSig) == 0x61417272) - { -#if (_FS_NOFSINFO & 1) == 0 - fs->free_clust = LD_DWORD(fs->win+FSI_Free_Count); -#endif -#if (_FS_NOFSINFO & 2) == 0 - fs->last_clust = LD_DWORD(fs->win+FSI_Nxt_Free); -#endif - } - } -#endif -#endif - fs->fs_type = fmt; /* FAT sub-type */ - fs->id = ++Fsid; /* File system mount ID */ -#if _FS_RPATH - fs->cdir = 0; /* Set current directory to root */ -#endif -#if _FS_LOCK /* Clear file lock semaphores */ - clear_lock(fs); -#endif - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Check if the file/directory object is valid or not */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT validate ( /* FR_OK(0): The object is valid, !=0: Invalid */ - void* obj /* Pointer to the object FIL/DIR to check validity */ -) -{ - FIL *fil = (FIL*)obj; /* Assuming offset of .fs and .id in the FIL/DIR structure is identical */ - - - if (!fil || !fil->fs || !fil->fs->fs_type || fil->fs->id != fil->id) - return FR_INVALID_OBJECT; - - ENTER_FF(fil->fs); /* Lock file system */ - - if (disk_status(fil->fs->drv) & STA_NOINIT) - return FR_NOT_READY; - - return FR_OK; -} - - - - -/*-------------------------------------------------------------------------- - - Public Functions - ---------------------------------------------------------------------------*/ - - - -/*-----------------------------------------------------------------------*/ -/* Mount/Unmount a Logical Drive */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_mount ( - FATFS* fs, /* Pointer to the file system object (NULL:unmount)*/ - const TCHAR* path, /* Logical drive number to be mounted/unmounted */ - BYTE opt /* 0:Do not mount (delayed mount), 1:Mount immediately */ -) -{ - FATFS *cfs; - int vol; - FRESULT res; - const TCHAR *rp = path; - - - vol = get_ldnumber(&rp); - if (vol < 0) return FR_INVALID_DRIVE; - cfs = FatFs[vol]; /* Pointer to fs object */ - - if (cfs) { -#if _FS_LOCK - clear_lock(cfs); -#endif -#if _FS_REENTRANT /* Discard sync object of the current volume */ - if (!ff_del_syncobj(cfs->sobj)) return FR_INT_ERR; -#endif - cfs->fs_type = 0; /* Clear old fs object */ - } - - if (fs) { - fs->fs_type = 0; /* Clear new fs object */ -#if _FS_REENTRANT /* Create sync object for the new volume */ - if (!ff_cre_syncobj((BYTE)vol, &fs->sobj)) return FR_INT_ERR; -#endif - } - FatFs[vol] = fs; /* Register new fs object */ - - if (!fs || opt != 1) return FR_OK; /* Do not mount now, it will be mounted later */ - - res = find_volume(&fs, &path, 0); /* Force mounted the volume */ - LEAVE_FF(fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Open or Create a File */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_open ( - FIL* fp, /* Pointer to the blank file object */ - const TCHAR* path, /* Pointer to the file name */ - BYTE mode /* Access mode and file open mode flags */ -) -{ - FRESULT res; - DIR dj; - BYTE *dir; - DEF_NAMEBUF; - - - if (!fp) return FR_INVALID_OBJECT; - fp->fs = 0; /* Clear file object */ - - /* Get logical drive number */ -#if !_FS_READONLY - mode &= FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW; - res = find_volume(&dj.fs, &path, (BYTE)(mode & ~FA_READ)); -#else - mode &= FA_READ; - res = find_volume(&dj.fs, &path, 0); -#endif - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the file path */ - dir = dj.dir; -#if !_FS_READONLY /* R/W configuration */ - if (res == FR_OK) { - if (!dir) /* Default directory itself */ - res = FR_INVALID_NAME; -#if _FS_LOCK - else - res = chk_lock(&dj, (mode & ~FA_READ) ? 1 : 0); -#endif - } - /* Create or Open a file */ - if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) { - DWORD dw, cl; - - if (res != FR_OK) { /* No file, create new */ - if (res == FR_NO_FILE) /* There is no file to open, create a new entry */ -#if _FS_LOCK - res = enq_lock() ? dir_register(&dj) : FR_TOO_MANY_OPEN_FILES; -#else - res = dir_register(&dj); -#endif - mode |= FA_CREATE_ALWAYS; /* File is created */ - dir = dj.dir; /* New entry */ - } - else { /* Any object is already existing */ - if (dir[DIR_Attr] & (AM_RDO | AM_DIR)) { /* Cannot overwrite it (R/O or DIR) */ - res = FR_DENIED; - } else { - if (mode & FA_CREATE_NEW) /* Cannot create as new file */ - res = FR_EXIST; - } - } - if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) { /* Truncate it if overwrite mode */ - dw = GET_FATTIME(); /* Created time */ - ST_DWORD(dir+DIR_CrtTime, dw); - dir[DIR_Attr] = 0; /* Reset attribute */ - ST_DWORD(dir+DIR_FileSize, 0); /* size = 0 */ - cl = ld_clust(dj.fs, dir); /* Get start cluster */ - st_clust(dir, 0); /* cluster = 0 */ - dj.fs->wflag = 1; - if (cl) { /* Remove the cluster chain if exist */ - dw = dj.fs->winsect; - res = remove_chain(dj.fs, cl); - if (res == FR_OK) { - dj.fs->last_clust = cl - 1; /* Reuse the cluster hole */ - res = move_window(dj.fs, dw); - } - } - } - } - else { /* Open an existing file */ - if (res == FR_OK) { /* Follow succeeded */ - if (dir[DIR_Attr] & AM_DIR) { /* It is a directory */ - res = FR_NO_FILE; - } else { - if ((mode & FA_WRITE) && (dir[DIR_Attr] & AM_RDO)) /* R/O violation */ - res = FR_DENIED; - } - } - } - if (res == FR_OK) { - if (mode & FA_CREATE_ALWAYS) /* Set file change flag if created or overwritten */ - mode |= FA__WRITTEN; - fp->dir_sect = dj.fs->winsect; /* Pointer to the directory entry */ - fp->dir_ptr = dir; -#if _FS_LOCK - fp->lockid = inc_lock(&dj, (mode & ~FA_READ) ? 1 : 0); - if (!fp->lockid) res = FR_INT_ERR; -#endif - } - -#else /* R/O configuration */ - if (res == FR_OK) { /* Follow succeeded */ - dir = dj.dir; - if (!dir) { /* Current directory itself */ - res = FR_INVALID_NAME; - } else { - if (dir[DIR_Attr] & AM_DIR) /* It is a directory */ - res = FR_NO_FILE; - } - } -#endif - FREE_BUF(); - - if (res == FR_OK) { - fp->flag = mode; /* File access mode */ - fp->err = 0; /* Clear error flag */ - fp->sclust = ld_clust(dj.fs, dir); /* File start cluster */ - fp->fsize = LD_DWORD(dir+DIR_FileSize); /* File size */ - fp->fptr = 0; /* File pointer */ - fp->dsect = 0; -#if _USE_FASTSEEK - fp->cltbl = 0; /* Normal seek mode */ -#endif - fp->fs = dj.fs; /* Validate file object */ - fp->id = fp->fs->id; - } - } - - LEAVE_FF(dj.fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read File */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_read ( - FIL* fp, /* Pointer to the file object */ - void* buff, /* Pointer to data buffer */ - UINT btr, /* Number of bytes to read */ - UINT* br /* Pointer to number of bytes read */ -) -{ - FRESULT res; - DWORD clst, sect, remain; - UINT rcnt, cc; - BYTE csect, *rbuff = (BYTE*)buff; - - - *br = 0; /* Clear read byte counter */ - - res = validate(fp); /* Check validity */ - if (res != FR_OK) LEAVE_FF(fp->fs, res); - if (fp->err) /* Check error */ - LEAVE_FF(fp->fs, (FRESULT)fp->err); - if (!(fp->flag & FA_READ)) /* Check access mode */ - LEAVE_FF(fp->fs, FR_DENIED); - remain = fp->fsize - fp->fptr; - if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */ - - for ( ; btr; /* Repeat until all data read */ - rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) { - if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */ - csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1)); /* Sector offset in the cluster */ - if (!csect) { /* On the cluster boundary? */ - if (fp->fptr == 0) { /* On the top of the file? */ - clst = fp->sclust; /* Follow from the origin */ - } else { /* Middle or end of the file */ -#if _USE_FASTSEEK - if (fp->cltbl) - clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ - else -#endif - clst = get_fat(fp->fs, fp->clust); /* Follow cluster chain on the FAT */ - } - if (clst < 2) ABORT(fp->fs, FR_INT_ERR); - if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); - fp->clust = clst; /* Update current cluster */ - } - sect = clust2sect(fp->fs, fp->clust); /* Get current sector */ - if (!sect) ABORT(fp->fs, FR_INT_ERR); - sect += csect; - cc = btr / SS(fp->fs); /* When remaining bytes >= sector size, */ - if (cc) { /* Read maximum contiguous sectors directly */ - if (csect + cc > fp->fs->csize) /* Clip at cluster boundary */ - cc = fp->fs->csize - csect; - if (disk_read(fp->fs->drv, rbuff, sect, cc) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); -#if !_FS_READONLY && _FS_MINIMIZE <= 2 /* Replace one of the read sectors with cached data if it contains a dirty sector */ -#if _FS_TINY - if (fp->fs->wflag && fp->fs->winsect - sect < cc) - mem_cpy(rbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), fp->fs->win, SS(fp->fs)); -#else - if ((fp->flag & FA__DIRTY) && fp->dsect - sect < cc) - mem_cpy(rbuff + ((fp->dsect - sect) * SS(fp->fs)), fp->buf, SS(fp->fs)); -#endif -#endif - rcnt = SS(fp->fs) * cc; /* Number of bytes transferred */ - continue; - } -#if !_FS_TINY - if (fp->dsect != sect) { /* Load data sector if not in cache */ -#if !_FS_READONLY - if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */ - if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); - fp->flag &= ~FA__DIRTY; - } -#endif - if (disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK) /* Fill sector cache */ - ABORT(fp->fs, FR_DISK_ERR); - } -#endif - fp->dsect = sect; - } - rcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs)); /* Get partial sector data from sector buffer */ - if (rcnt > btr) rcnt = btr; -#if _FS_TINY - if (move_window(fp->fs, fp->dsect) != FR_OK) /* Move sector window */ - ABORT(fp->fs, FR_DISK_ERR); - mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */ -#else - mem_cpy(rbuff, &fp->buf[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */ -#endif - } - - LEAVE_FF(fp->fs, FR_OK); -} - - - - -#if !_FS_READONLY -/*-----------------------------------------------------------------------*/ -/* Write File */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_write ( - FIL* fp, /* Pointer to the file object */ - const void *buff, /* Pointer to the data to be written */ - UINT btw, /* Number of bytes to write */ - UINT* bw /* Pointer to number of bytes written */ -) -{ - FRESULT res; - DWORD clst, sect; - UINT wcnt, cc; - const BYTE *wbuff = (const BYTE*)buff; - BYTE csect; - - - *bw = 0; /* Clear write byte counter */ - - res = validate(fp); /* Check validity */ - if (res != FR_OK) LEAVE_FF(fp->fs, res); - if (fp->err) /* Check error */ - LEAVE_FF(fp->fs, (FRESULT)fp->err); - if (!(fp->flag & FA_WRITE)) /* Check access mode */ - LEAVE_FF(fp->fs, FR_DENIED); - if (fp->fptr + btw < fp->fptr) btw = 0; /* File size cannot reach 4GB */ - - for ( ; btw; /* Repeat until all data written */ - wbuff += wcnt, fp->fptr += wcnt, *bw += wcnt, btw -= wcnt) { - if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */ - csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1)); /* Sector offset in the cluster */ - if (!csect) { /* On the cluster boundary? */ - if (fp->fptr == 0) { /* On the top of the file? */ - clst = fp->sclust; /* Follow from the origin */ - if (clst == 0) /* When no cluster is allocated, */ - clst = create_chain(fp->fs, 0); /* Create a new cluster chain */ - } else { /* Middle or end of the file */ -#if _USE_FASTSEEK - if (fp->cltbl) - clst = clmt_clust(fp, fp->fptr); /* Get cluster# from the CLMT */ - else -#endif - clst = create_chain(fp->fs, fp->clust); /* Follow or stretch cluster chain on the FAT */ - } - if (clst == 0) break; /* Could not allocate a new cluster (disk full) */ - if (clst == 1) ABORT(fp->fs, FR_INT_ERR); - if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); - fp->clust = clst; /* Update current cluster */ - if (fp->sclust == 0) fp->sclust = clst; /* Set start cluster if the first write */ - } -#if _FS_TINY - if (fp->fs->winsect == fp->dsect && sync_window(fp->fs)) /* Write-back sector cache */ - ABORT(fp->fs, FR_DISK_ERR); -#else - if (fp->flag & FA__DIRTY) { /* Write-back sector cache */ - if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); - fp->flag &= ~FA__DIRTY; - } -#endif - sect = clust2sect(fp->fs, fp->clust); /* Get current sector */ - if (!sect) ABORT(fp->fs, FR_INT_ERR); - sect += csect; - cc = btw / SS(fp->fs); /* When remaining bytes >= sector size, */ - if (cc) { /* Write maximum contiguous sectors directly */ - if (csect + cc > fp->fs->csize) /* Clip at cluster boundary */ - cc = fp->fs->csize - csect; - if (disk_write(fp->fs->drv, wbuff, sect, cc) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); -#if _FS_MINIMIZE <= 2 -#if _FS_TINY - if (fp->fs->winsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ - mem_cpy(fp->fs->win, wbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), SS(fp->fs)); - fp->fs->wflag = 0; - } -#else - if (fp->dsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */ - mem_cpy(fp->buf, wbuff + ((fp->dsect - sect) * SS(fp->fs)), SS(fp->fs)); - fp->flag &= ~FA__DIRTY; - } -#endif -#endif - wcnt = SS(fp->fs) * cc; /* Number of bytes transferred */ - continue; - } -#if _FS_TINY - if (fp->fptr >= fp->fsize) { /* Avoid silly cache filling at growing edge */ - if (sync_window(fp->fs)) ABORT(fp->fs, FR_DISK_ERR); - fp->fs->winsect = sect; - } -#else - if (fp->dsect != sect) { /* Fill sector cache with file data */ - if (fp->fptr < fp->fsize && - disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); - } -#endif - fp->dsect = sect; - } - wcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));/* Put partial sector into file I/O buffer */ - if (wcnt > btw) wcnt = btw; -#if _FS_TINY - if (move_window(fp->fs, fp->dsect) != FR_OK) /* Move sector window */ - ABORT(fp->fs, FR_DISK_ERR); - mem_cpy(&fp->fs->win[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */ - fp->fs->wflag = 1; -#else - mem_cpy(&fp->buf[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */ - fp->flag |= FA__DIRTY; -#endif - } - - if (fp->fptr > fp->fsize) fp->fsize = fp->fptr; /* Update file size if needed */ - fp->flag |= FA__WRITTEN; /* Set file change flag */ - - LEAVE_FF(fp->fs, FR_OK); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Synchronize the File */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_sync ( - FIL* fp /* Pointer to the file object */ -) -{ - FRESULT res; - DWORD tm; - BYTE *dir; - - - res = validate(fp); /* Check validity of the object */ - if (res == FR_OK) { - if (fp->flag & FA__WRITTEN) { /* Has the file been written? */ - /* Write-back dirty buffer */ -#if !_FS_TINY - if (fp->flag & FA__DIRTY) { - if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) - LEAVE_FF(fp->fs, FR_DISK_ERR); - fp->flag &= ~FA__DIRTY; - } -#endif - /* Update the directory entry */ - res = move_window(fp->fs, fp->dir_sect); - if (res == FR_OK) { - dir = fp->dir_ptr; - dir[DIR_Attr] |= AM_ARC; /* Set archive bit */ - ST_DWORD(dir+DIR_FileSize, fp->fsize); /* Update file size */ - st_clust(dir, fp->sclust); /* Update start cluster */ - tm = GET_FATTIME(); /* Update updated time */ - ST_DWORD(dir+DIR_WrtTime, tm); - ST_WORD(dir+DIR_LstAccDate, 0); - fp->flag &= ~FA__WRITTEN; - fp->fs->wflag = 1; - res = sync_fs(fp->fs); - } - } - } - - LEAVE_FF(fp->fs, res); -} - -#endif /* !_FS_READONLY */ - - - - -/*-----------------------------------------------------------------------*/ -/* Close File */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_close ( - FIL *fp /* Pointer to the file object to be closed */ -) -{ - FRESULT res; - - -#if !_FS_READONLY - res = f_sync(fp); /* Flush cached data */ - if (res == FR_OK) -#endif - { - res = validate(fp); /* Lock volume */ - if (res == FR_OK) { -#if _FS_REENTRANT - FATFS *fs = fp->fs; -#endif -#if _FS_LOCK - res = dec_lock(fp->lockid); /* Decrement file open counter */ - if (res == FR_OK) -#endif - fp->fs = 0; /* Invalidate file object */ -#if _FS_REENTRANT - unlock_fs(fs, FR_OK); /* Unlock volume */ -#endif - } - } - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Change Current Directory or Current Drive, Get Current Directory */ -/*-----------------------------------------------------------------------*/ - -#if _FS_RPATH >= 1 -#if _VOLUMES >= 2 -FRESULT f_chdrive ( - const TCHAR* path /* Drive number */ -) -{ - int vol; - - - vol = get_ldnumber(&path); - if (vol < 0) return FR_INVALID_DRIVE; - - CurrVol = (BYTE)vol; - - return FR_OK; -} -#endif - - -FRESULT f_chdir ( - const TCHAR* path /* Pointer to the directory path */ -) -{ - FRESULT res; - DIR dj; - DEF_NAMEBUF; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 0); - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the path */ - FREE_BUF(); - if (res == FR_OK) { /* Follow completed */ - if (!dj.dir) { - dj.fs->cdir = dj.sclust; /* Start directory itself */ - } else { - if (dj.dir[DIR_Attr] & AM_DIR) /* Reached to the directory */ - dj.fs->cdir = ld_clust(dj.fs, dj.dir); - else - res = FR_NO_PATH; /* Reached but a file */ - } - } - if (res == FR_NO_FILE) res = FR_NO_PATH; - } - - LEAVE_FF(dj.fs, res); -} - - -#if _FS_RPATH >= 2 -FRESULT f_getcwd ( - TCHAR* buff, /* Pointer to the directory path */ - UINT len /* Size of path */ -) -{ - FRESULT res; - DIR dj; - UINT i, n; - DWORD ccl; - TCHAR *tp; - FILINFO fno; - DEF_NAMEBUF; - - - *buff = 0; - /* Get logical drive number */ - res = find_volume(&dj.fs, (const TCHAR**)&buff, 0); /* Get current volume */ - if (res == FR_OK) { - INIT_BUF(dj); - i = len; /* Bottom of buffer (directory stack base) */ - dj.sclust = dj.fs->cdir; /* Start to follow upper directory from current directory */ - while ((ccl = dj.sclust) != 0) { /* Repeat while current directory is a sub-directory */ - res = dir_sdi(&dj, 1); /* Get parent directory */ - if (res != FR_OK) break; - res = dir_read(&dj, 0); - if (res != FR_OK) break; - dj.sclust = ld_clust(dj.fs, dj.dir); /* Goto parent directory */ - res = dir_sdi(&dj, 0); - if (res != FR_OK) break; - do { /* Find the entry links to the child directory */ - res = dir_read(&dj, 0); - if (res != FR_OK) break; - if (ccl == ld_clust(dj.fs, dj.dir)) break; /* Found the entry */ - res = dir_next(&dj, 0); - } while (res == FR_OK); - if (res == FR_NO_FILE) res = FR_INT_ERR;/* It cannot be 'not found'. */ - if (res != FR_OK) break; -#if _USE_LFN - fno.lfname = buff; - fno.lfsize = i; -#endif - get_fileinfo(&dj, &fno); /* Get the directory name and push it to the buffer */ - tp = fno.fname; -#if _USE_LFN - if (*buff) tp = buff; -#endif - for (n = 0; tp[n]; n++) ; - if (i < n + 3) { - res = FR_NOT_ENOUGH_CORE; break; - } - while (n) buff[--i] = tp[--n]; - buff[--i] = '/'; - } - tp = buff; - if (res == FR_OK) { -#if _VOLUMES >= 2 - *tp++ = '0' + CurrVol; /* Put drive number */ - *tp++ = ':'; -#endif - if (i == len) { /* Root-directory */ - *tp++ = '/'; - } else { /* Sub-directroy */ - do /* Add stacked path str */ - *tp++ = buff[i++]; - while (i < len); - } - } - *tp = 0; - FREE_BUF(); - } - - LEAVE_FF(dj.fs, res); -} -#endif /* _FS_RPATH >= 2 */ -#endif /* _FS_RPATH >= 1 */ - - - -#if _FS_MINIMIZE <= 2 -/*-----------------------------------------------------------------------*/ -/* Seek File R/W Pointer */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_lseek ( - FIL* fp, /* Pointer to the file object */ - DWORD ofs /* File pointer from top of file */ -) -{ - FRESULT res; - - - res = validate(fp); /* Check validity of the object */ - if (res != FR_OK) LEAVE_FF(fp->fs, res); - if (fp->err) /* Check error */ - LEAVE_FF(fp->fs, (FRESULT)fp->err); - -#if _USE_FASTSEEK - if (fp->cltbl) { /* Fast seek */ - DWORD cl, pcl, ncl, tcl, dsc, tlen, ulen, *tbl; - - if (ofs == CREATE_LINKMAP) { /* Create CLMT */ - tbl = fp->cltbl; - tlen = *tbl++; ulen = 2; /* Given table size and required table size */ - cl = fp->sclust; /* Top of the chain */ - if (cl) { - do { - /* Get a fragment */ - tcl = cl; ncl = 0; ulen += 2; /* Top, length and used items */ - do { - pcl = cl; ncl++; - cl = get_fat(fp->fs, cl); - if (cl <= 1) ABORT(fp->fs, FR_INT_ERR); - if (cl == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); - } while (cl == pcl + 1); - if (ulen <= tlen) { /* Store the length and top of the fragment */ - *tbl++ = ncl; *tbl++ = tcl; - } - } while (cl < fp->fs->n_fatent); /* Repeat until end of chain */ - } - *fp->cltbl = ulen; /* Number of items used */ - if (ulen <= tlen) - *tbl = 0; /* Terminate table */ - else - res = FR_NOT_ENOUGH_CORE; /* Given table size is smaller than required */ - - } else { /* Fast seek */ - if (ofs > fp->fsize) /* Clip offset at the file size */ - ofs = fp->fsize; - fp->fptr = ofs; /* Set file pointer */ - if (ofs) { - fp->clust = clmt_clust(fp, ofs - 1); - dsc = clust2sect(fp->fs, fp->clust); - if (!dsc) ABORT(fp->fs, FR_INT_ERR); - dsc += (ofs - 1) / SS(fp->fs) & (fp->fs->csize - 1); - if (fp->fptr % SS(fp->fs) && dsc != fp->dsect) { /* Refill sector cache if needed */ -#if !_FS_TINY -#if !_FS_READONLY - if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */ - if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); - fp->flag &= ~FA__DIRTY; - } -#endif - if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK) /* Load current sector */ - ABORT(fp->fs, FR_DISK_ERR); -#endif - fp->dsect = dsc; - } - } - } - } else -#endif - - /* Normal Seek */ - { - DWORD clst, bcs, nsect, ifptr; - - if (ofs > fp->fsize /* In read-only mode, clip offset with the file size */ -#if !_FS_READONLY - && !(fp->flag & FA_WRITE) -#endif - ) ofs = fp->fsize; - - ifptr = fp->fptr; - fp->fptr = nsect = 0; - if (ofs) { - bcs = (DWORD)fp->fs->csize * SS(fp->fs); /* Cluster size (byte) */ - if (ifptr > 0 && - (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */ - fp->fptr = (ifptr - 1) & ~(bcs - 1); /* start from the current cluster */ - ofs -= fp->fptr; - clst = fp->clust; - } else { /* When seek to back cluster, */ - clst = fp->sclust; /* start from the first cluster */ -#if !_FS_READONLY - if (clst == 0) { /* If no cluster chain, create a new chain */ - clst = create_chain(fp->fs, 0); - if (clst == 1) ABORT(fp->fs, FR_INT_ERR); - if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); - fp->sclust = clst; - } -#endif - fp->clust = clst; - } - if (clst != 0) { - while (ofs > bcs) { /* Cluster following loop */ -#if !_FS_READONLY - if (fp->flag & FA_WRITE) { /* Check if in write mode or not */ - clst = create_chain(fp->fs, clst); /* Force stretch if in write mode */ - if (clst == 0) { /* When disk gets full, clip file size */ - ofs = bcs; break; - } - } else -#endif - clst = get_fat(fp->fs, clst); /* Follow cluster chain if not in write mode */ - if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); - if (clst <= 1 || clst >= fp->fs->n_fatent) ABORT(fp->fs, FR_INT_ERR); - fp->clust = clst; - fp->fptr += bcs; - ofs -= bcs; - } - fp->fptr += ofs; - if (ofs % SS(fp->fs)) { - nsect = clust2sect(fp->fs, clst); /* Current sector */ - if (!nsect) ABORT(fp->fs, FR_INT_ERR); - nsect += ofs / SS(fp->fs); - } - } - } - if (fp->fptr % SS(fp->fs) && nsect != fp->dsect) { /* Fill sector cache if needed */ -#if !_FS_TINY -#if !_FS_READONLY - if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */ - if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) - ABORT(fp->fs, FR_DISK_ERR); - fp->flag &= ~FA__DIRTY; - } -#endif - if (disk_read(fp->fs->drv, fp->buf, nsect, 1) != RES_OK) /* Fill sector cache */ - ABORT(fp->fs, FR_DISK_ERR); -#endif - fp->dsect = nsect; - } -#if !_FS_READONLY - if (fp->fptr > fp->fsize) { /* Set file change flag if the file size is extended */ - fp->fsize = fp->fptr; - fp->flag |= FA__WRITTEN; - } -#endif - } - - LEAVE_FF(fp->fs, res); -} - - - -#if _FS_MINIMIZE <= 1 -/*-----------------------------------------------------------------------*/ -/* Create a Directory Object */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_opendir ( - DIR* dp, /* Pointer to directory object to create */ - const TCHAR* path /* Pointer to the directory path */ -) -{ - FRESULT res; - FATFS* fs; - DEF_NAMEBUF; - - - if (!dp) return FR_INVALID_OBJECT; - - /* Get logical drive number */ - res = find_volume(&fs, &path, 0); - if (res == FR_OK) { - dp->fs = fs; - INIT_BUF(*dp); - res = follow_path(dp, path); /* Follow the path to the directory */ - FREE_BUF(); - if (res == FR_OK) { /* Follow completed */ - if (dp->dir) { /* It is not the origin directory itself */ - if (dp->dir[DIR_Attr] & AM_DIR) /* The object is a sub directory */ - dp->sclust = ld_clust(fs, dp->dir); - else /* The object is a file */ - res = FR_NO_PATH; - } - if (res == FR_OK) { - dp->id = fs->id; - res = dir_sdi(dp, 0); /* Rewind directory */ -#if _FS_LOCK - if (res == FR_OK) { - if (dp->sclust) { - dp->lockid = inc_lock(dp, 0); /* Lock the sub directory */ - if (!dp->lockid) - res = FR_TOO_MANY_OPEN_FILES; - } else { - dp->lockid = 0; /* Root directory need not to be locked */ - } - } -#endif - } - } - if (res == FR_NO_FILE) res = FR_NO_PATH; - } - if (res != FR_OK) dp->fs = 0; /* Invalidate the directory object if function faild */ - - LEAVE_FF(fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Close Directory */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_closedir ( - DIR *dp /* Pointer to the directory object to be closed */ -) -{ - FRESULT res; - - - res = validate(dp); - if (res == FR_OK) { -#if _FS_REENTRANT - FATFS *fs = dp->fs; -#endif -#if _FS_LOCK - if (dp->lockid) /* Decrement sub-directory open counter */ - res = dec_lock(dp->lockid); - if (res == FR_OK) -#endif - dp->fs = 0; /* Invalidate directory object */ -#if _FS_REENTRANT - unlock_fs(fs, FR_OK); /* Unlock volume */ -#endif - } - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read Directory Entries in Sequence */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_readdir ( - DIR* dp, /* Pointer to the open directory object */ - FILINFO* fno /* Pointer to file information to return */ -) -{ - FRESULT res; - DEF_NAMEBUF; - - - res = validate(dp); /* Check validity of the object */ - if (res == FR_OK) { - if (!fno) { - res = dir_sdi(dp, 0); /* Rewind the directory object */ - } else { - INIT_BUF(*dp); - res = dir_read(dp, 0); /* Read an item */ - if (res == FR_NO_FILE) { /* Reached end of directory */ - dp->sect = 0; - res = FR_OK; - } - if (res == FR_OK) { /* A valid entry is found */ - get_fileinfo(dp, fno); /* Get the object information */ - res = dir_next(dp, 0); /* Increment index for next */ - if (res == FR_NO_FILE) { - dp->sect = 0; - res = FR_OK; - } - } - FREE_BUF(); - } - } - - LEAVE_FF(dp->fs, res); -} - - - -#if _FS_MINIMIZE == 0 -/*-----------------------------------------------------------------------*/ -/* Get File Status */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_stat ( - const TCHAR* path, /* Pointer to the file path */ - FILINFO* fno /* Pointer to file information to return */ -) -{ - FRESULT res; - DIR dj; - DEF_NAMEBUF; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 0); - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the file path */ - if (res == FR_OK) { /* Follow completed */ - if (dj.dir) { /* Found an object */ - if (fno) get_fileinfo(&dj, fno); - } else { /* It is root directory */ - res = FR_INVALID_NAME; - } - } - FREE_BUF(); - } - - LEAVE_FF(dj.fs, res); -} - - - -#if !_FS_READONLY -/*-----------------------------------------------------------------------*/ -/* Get Number of Free Clusters */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_getfree ( - const TCHAR* path, /* Path name of the logical drive number */ - DWORD* nclst, /* Pointer to a variable to return number of free clusters */ - FATFS** fatfs /* Pointer to return pointer to corresponding file system object */ -) -{ - FRESULT res; - FATFS *fs; - DWORD n, clst, sect, stat; - UINT i; - BYTE fat, *p; - - - /* Get logical drive number */ - res = find_volume(fatfs, &path, 0); - fs = *fatfs; - if (res == FR_OK) { - /* If free_clust is valid, return it without full cluster scan */ - if (fs->free_clust <= fs->n_fatent - 2) { - *nclst = fs->free_clust; - } else { - /* Get number of free clusters */ - fat = fs->fs_type; - n = 0; - if (fat == FS_FAT12) { - clst = 2; - do { - stat = get_fat(fs, clst); - if (stat == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } - if (stat == 1) { res = FR_INT_ERR; break; } - if (stat == 0) n++; - } while (++clst < fs->n_fatent); - } else { - clst = fs->n_fatent; - sect = fs->fatbase; - i = 0; p = 0; - do { - if (!i) { - res = move_window(fs, sect++); - if (res != FR_OK) break; - p = fs->win; - i = SS(fs); - } - if (fat == FS_FAT16) { - if (LD_WORD(p) == 0) n++; - p += 2; i -= 2; - } else { - if ((LD_DWORD(p) & 0x0FFFFFFF) == 0) n++; - p += 4; i -= 4; - } - } while (--clst); - } - fs->free_clust = n; - fs->fsi_flag |= 1; - *nclst = n; - } - } - LEAVE_FF(fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Truncate File */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_truncate ( - FIL* fp /* Pointer to the file object */ -) -{ - FRESULT res; - DWORD ncl; - - - res = validate(fp); /* Check validity of the object */ - if (res == FR_OK) { - if (fp->err) { /* Check error */ - res = (FRESULT)fp->err; - } else { - if (!(fp->flag & FA_WRITE)) /* Check access mode */ - res = FR_DENIED; - } - } - if (res == FR_OK) { - if (fp->fsize > fp->fptr) { - fp->fsize = fp->fptr; /* Set file size to current R/W point */ - fp->flag |= FA__WRITTEN; - if (fp->fptr == 0) { /* When set file size to zero, remove entire cluster chain */ - res = remove_chain(fp->fs, fp->sclust); - fp->sclust = 0; - } else { /* When truncate a part of the file, remove remaining clusters */ - ncl = get_fat(fp->fs, fp->clust); - res = FR_OK; - if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR; - if (ncl == 1) res = FR_INT_ERR; - if (res == FR_OK && ncl < fp->fs->n_fatent) { - res = put_fat(fp->fs, fp->clust, 0x0FFFFFFF); - if (res == FR_OK) res = remove_chain(fp->fs, ncl); - } - } -#if !_FS_TINY - if (res == FR_OK && (fp->flag & FA__DIRTY)) { - if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK) - res = FR_DISK_ERR; - else - fp->flag &= ~FA__DIRTY; - } -#endif - } - if (res != FR_OK) fp->err = (FRESULT)res; - } - - LEAVE_FF(fp->fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Delete a File or Directory */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_unlink ( - const TCHAR* path /* Pointer to the file or directory path */ -) -{ - FRESULT res; - DIR dj, sdj; - BYTE *dir; - DWORD dclst = 0; - DEF_NAMEBUF; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 1); - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the file path */ - if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT)) - res = FR_INVALID_NAME; /* Cannot remove dot entry */ -#if _FS_LOCK - if (res == FR_OK) res = chk_lock(&dj, 2); /* Cannot remove open object */ -#endif - if (res == FR_OK) { /* The object is accessible */ - dir = dj.dir; - if (!dir) { - res = FR_INVALID_NAME; /* Cannot remove the origin directory */ - } else { - if (dir[DIR_Attr] & AM_RDO) - res = FR_DENIED; /* Cannot remove R/O object */ - } - //if (res == FR_OK && (dir[DIR_Attr] & AM_DIR)) { /* Is it a sub-dir? */ - if (res == FR_OK) { - dclst = ld_clust(dj.fs, dir); - if (dir[DIR_Attr] & AM_DIR) { /* Is it a sub-dir? */ - if (!dclst) { - res = FR_INT_ERR; - } else { /* Make sure the sub-directory is empty */ - mem_cpy(&sdj, &dj, sizeof (DIR)); - sdj.sclust = dclst; - res = dir_sdi(&sdj, 2); /* Exclude dot entries */ - if (res == FR_OK) { - res = dir_read(&sdj, 0); /* Read an item */ - if (res == FR_OK /* Not empty directory */ -#if _FS_RPATH - || dclst == dj.fs->cdir /* or current directory */ -#endif - ) res = FR_DENIED; - if (res == FR_NO_FILE) res = FR_OK; /* It is empty */ - } - } - } - } - if (res == FR_OK) { - res = dir_remove(&dj); /* Remove the directory entry */ - if (res == FR_OK && dclst) /* Remove the cluster chain if exist */ - res = remove_chain(dj.fs, dclst); - if (res == FR_OK) res = sync_fs(dj.fs); - } - } - FREE_BUF(); - } - - LEAVE_FF(dj.fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Create a Directory */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_mkdir ( - const TCHAR* path /* Pointer to the directory path */ -) -{ - FRESULT res; - DIR dj; - BYTE *dir, n; - DWORD dsc, dcl, pcl, tm = GET_FATTIME(); - DEF_NAMEBUF; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 1); - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the file path */ - if (res == FR_OK) res = FR_EXIST; /* Any object with same name is already existing */ - if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NSFLAG] & NS_DOT)) - res = FR_INVALID_NAME; - if (res == FR_NO_FILE) { /* Can create a new directory */ - dcl = create_chain(dj.fs, 0); /* Allocate a cluster for the new directory table */ - res = FR_OK; - if (dcl == 0) res = FR_DENIED; /* No space to allocate a new cluster */ - if (dcl == 1) res = FR_INT_ERR; - if (dcl == 0xFFFFFFFF) res = FR_DISK_ERR; - if (res == FR_OK) /* Flush FAT */ - res = sync_window(dj.fs); - if (res == FR_OK) { /* Initialize the new directory table */ - dsc = clust2sect(dj.fs, dcl); - dir = dj.fs->win; - mem_set(dir, 0, SS(dj.fs)); - mem_set(dir+DIR_Name, ' ', 11); /* Create "." entry */ - dir[DIR_Name] = '.'; - dir[DIR_Attr] = AM_DIR; - ST_DWORD(dir+DIR_WrtTime, tm); - st_clust(dir, dcl); - mem_cpy(dir+SZ_DIR, dir, SZ_DIR); /* Create ".." entry */ - dir[SZ_DIR+1] = '.'; pcl = dj.sclust; - if (dj.fs->fs_type == FS_FAT32 && pcl == dj.fs->dirbase) - pcl = 0; - st_clust(dir+SZ_DIR, pcl); - for (n = dj.fs->csize; n; n--) { /* Write dot entries and clear following sectors */ - dj.fs->winsect = dsc++; - dj.fs->wflag = 1; - res = sync_window(dj.fs); - if (res != FR_OK) break; - mem_set(dir, 0, SS(dj.fs)); - } - } - if (res == FR_OK) res = dir_register(&dj); /* Register the object to the directoy */ - if (res != FR_OK) { - remove_chain(dj.fs, dcl); /* Could not register, remove cluster chain */ - } else { - dir = dj.dir; - dir[DIR_Attr] = AM_DIR; /* Attribute */ - ST_DWORD(dir+DIR_WrtTime, tm); /* Created time */ - st_clust(dir, dcl); /* Table start cluster */ - dj.fs->wflag = 1; - res = sync_fs(dj.fs); - } - } - FREE_BUF(); - } - - LEAVE_FF(dj.fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Change Attribute */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_chmod ( - const TCHAR* path, /* Pointer to the file path */ - BYTE value, /* Attribute bits */ - BYTE mask /* Attribute mask to change */ -) -{ - FRESULT res; - DIR dj; - BYTE *dir; - DEF_NAMEBUF; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 1); - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the file path */ - FREE_BUF(); - if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT)) - res = FR_INVALID_NAME; - if (res == FR_OK) { - dir = dj.dir; - if (!dir) { /* Is it a root directory? */ - res = FR_INVALID_NAME; - } else { /* File or sub directory */ - mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC; /* Valid attribute mask */ - dir[DIR_Attr] = (value & mask) | (dir[DIR_Attr] & (BYTE)~mask); /* Apply attribute change */ - dj.fs->wflag = 1; - res = sync_fs(dj.fs); - } - } - } - - LEAVE_FF(dj.fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Rename File/Directory */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_rename ( - const TCHAR* path_old, /* Pointer to the object to be renamed */ - const TCHAR* path_new /* Pointer to the new name */ -) -{ - FRESULT res; - DIR djo, djn; - BYTE buf[21], *dir; - DWORD dw; - DEF_NAMEBUF; - - - /* Get logical drive number of the source object */ - res = find_volume(&djo.fs, &path_old, 1); - if (res == FR_OK) { - djn.fs = djo.fs; - INIT_BUF(djo); - res = follow_path(&djo, path_old); /* Check old object */ - if (_FS_RPATH && res == FR_OK && (djo.fn[NSFLAG] & NS_DOT)) - res = FR_INVALID_NAME; -#if _FS_LOCK - if (res == FR_OK) res = chk_lock(&djo, 2); -#endif - if (res == FR_OK) { /* Old object is found */ - if (!djo.dir) { /* Is root dir? */ - res = FR_NO_FILE; - } else { - mem_cpy(buf, djo.dir+DIR_Attr, 21); /* Save the object information except name */ - mem_cpy(&djn, &djo, sizeof (DIR)); /* Duplicate the directory object */ - if (get_ldnumber(&path_new) >= 0) /* Snip drive number off and ignore it */ - res = follow_path(&djn, path_new); /* and make sure if new object name is not conflicting */ - else - res = FR_INVALID_DRIVE; - if (res == FR_OK) res = FR_EXIST; /* The new object name is already existing */ - if (res == FR_NO_FILE) { /* It is a valid path and no name collision */ -/* Start of critical section that any interruption can cause a cross-link */ - res = dir_register(&djn); /* Register the new entry */ - if (res == FR_OK) { - dir = djn.dir; /* Copy object information except name */ - mem_cpy(dir+13, buf+2, 19); - dir[DIR_Attr] = buf[0] | AM_ARC; - djo.fs->wflag = 1; - if ((dir[DIR_Attr] & AM_DIR) && djo.sclust != djn.sclust) { /* Update .. entry in the directory if needed */ - dw = clust2sect(djo.fs, ld_clust(djo.fs, dir)); - if (!dw) { - res = FR_INT_ERR; - } else { - res = move_window(djo.fs, dw); - dir = djo.fs->win+SZ_DIR; /* .. entry */ - if (res == FR_OK && dir[1] == '.') { - st_clust(dir, djn.sclust); - djo.fs->wflag = 1; - } - } - } - if (res == FR_OK) { - res = dir_remove(&djo); /* Remove old entry */ - if (res == FR_OK) - res = sync_fs(djo.fs); - } - } -/* End of critical section */ - } - } - } - FREE_BUF(); - } - - LEAVE_FF(djo.fs, res); -} - - - - -/*-----------------------------------------------------------------------*/ -/* Change Timestamp */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_utime ( - const TCHAR* path, /* Pointer to the file/directory name */ - const FILINFO* fno /* Pointer to the time stamp to be set */ -) -{ - FRESULT res; - DIR dj; - BYTE *dir; - DEF_NAMEBUF; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 1); - if (res == FR_OK) { - INIT_BUF(dj); - res = follow_path(&dj, path); /* Follow the file path */ - FREE_BUF(); - if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT)) - res = FR_INVALID_NAME; - if (res == FR_OK) { - dir = dj.dir; - if (!dir) { /* Root directory */ - res = FR_INVALID_NAME; - } else { /* File or sub-directory */ - ST_WORD(dir+DIR_WrtTime, fno->ftime); - ST_WORD(dir+DIR_WrtDate, fno->fdate); - dj.fs->wflag = 1; - res = sync_fs(dj.fs); - } - } - } - - LEAVE_FF(dj.fs, res); -} - -#endif /* !_FS_READONLY */ -#endif /* _FS_MINIMIZE == 0 */ -#endif /* _FS_MINIMIZE <= 1 */ -#endif /* _FS_MINIMIZE <= 2 */ - - - -#if _USE_LABEL -/*-----------------------------------------------------------------------*/ -/* Get volume label */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_getlabel ( - const TCHAR* path, /* Path name of the logical drive number */ - TCHAR* label, /* Pointer to a buffer to return the volume label */ - DWORD* vsn /* Pointer to a variable to return the volume serial number */ -) -{ - FRESULT res; - DIR dj; - UINT i, j; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &path, 0); - - /* Get volume label */ - if (res == FR_OK && label) { - dj.sclust = 0; /* Open root directory */ - res = dir_sdi(&dj, 0); - if (res == FR_OK) { - res = dir_read(&dj, 1); /* Get an entry with AM_VOL */ - if (res == FR_OK) { /* A volume label is exist */ -#if _USE_LFN && _LFN_UNICODE - WCHAR w; - i = j = 0; - do { - w = (i < 11) ? dj.dir[i++] : ' '; - if (IsDBCS1(w) && i < 11 && IsDBCS2(dj.dir[i])) - w = w << 8 | dj.dir[i++]; - label[j++] = ff_convert(w, 1); /* OEM -> Unicode */ - } while (j < 11); -#else - mem_cpy(label, dj.dir, 11); -#endif - j = 11; - do { - label[j] = 0; - if (!j) break; - } while (label[--j] == ' '); - } - if (res == FR_NO_FILE) { /* No label, return nul string */ - label[0] = 0; - res = FR_OK; - } - } - } - - /* Get volume serial number */ - if (res == FR_OK && vsn) { - res = move_window(dj.fs, dj.fs->volbase); - if (res == FR_OK) { - i = dj.fs->fs_type == FS_FAT32 ? BS_VolID32 : BS_VolID; - *vsn = LD_DWORD(&dj.fs->win[i]); - } - } - - LEAVE_FF(dj.fs, res); -} - - - -#if !_FS_READONLY -/*-----------------------------------------------------------------------*/ -/* Set volume label */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_setlabel ( - const TCHAR* label /* Pointer to the volume label to set */ -) -{ - FRESULT res; - DIR dj; - BYTE vn[11]; - UINT i, j, sl; - WCHAR w; - DWORD tm; - - - /* Get logical drive number */ - res = find_volume(&dj.fs, &label, 1); - if (res) LEAVE_FF(dj.fs, res); - - /* Create a volume label in directory form */ - vn[0] = 0; - for (sl = 0; label[sl]; sl++) ; /* Get name length */ - for ( ; sl && label[sl-1] == ' '; sl--) ; /* Remove trailing spaces */ - if (sl) { /* Create volume label in directory form */ - i = j = 0; - do { -#if _USE_LFN && _LFN_UNICODE - w = ff_convert(ff_wtoupper(label[i++]), 0); -#else - w = (BYTE)label[i++]; - if (IsDBCS1(w)) - w = (j < 10 && i < sl && IsDBCS2(label[i])) ? w << 8 | (BYTE)label[i++] : 0; -#if _USE_LFN - w = ff_convert(ff_wtoupper(ff_convert(w, 1)), 0); -#else - if (IsLower(w)) w -= 0x20; /* To upper ASCII characters */ -#ifdef _EXCVT - if (w >= 0x80) w = ExCvt[w - 0x80]; /* To upper extended characters (SBCS cfg) */ -#else - if (!_DF1S && w >= 0x80) w = 0; /* Reject extended characters (ASCII cfg) */ -#endif -#endif -#endif - if (!w || chk_chr("\"*+,.:;<=>\?[]|\x7F", w) || j >= (UINT)((w >= 0x100) ? 10 : 11)) /* Reject invalid characters for volume label */ - LEAVE_FF(dj.fs, FR_INVALID_NAME); - if (w >= 0x100) vn[j++] = (BYTE)(w >> 8); - vn[j++] = (BYTE)w; - } while (i < sl); - while (j < 11) vn[j++] = ' '; - } - - /* Set volume label */ - dj.sclust = 0; /* Open root directory */ - res = dir_sdi(&dj, 0); - if (res == FR_OK) { - res = dir_read(&dj, 1); /* Get an entry with AM_VOL */ - if (res == FR_OK) { /* A volume label is found */ - if (vn[0]) { - mem_cpy(dj.dir, vn, 11); /* Change the volume label name */ - tm = GET_FATTIME(); - ST_DWORD(dj.dir+DIR_WrtTime, tm); - } else { - dj.dir[0] = DDE; /* Remove the volume label */ - } - dj.fs->wflag = 1; - res = sync_fs(dj.fs); - } else { /* No volume label is found or error */ - if (res == FR_NO_FILE) { - res = FR_OK; - if (vn[0]) { /* Create volume label as new */ - res = dir_alloc(&dj, 1); /* Allocate an entry for volume label */ - if (res == FR_OK) { - mem_set(dj.dir, 0, SZ_DIR); /* Set volume label */ - mem_cpy(dj.dir, vn, 11); - dj.dir[DIR_Attr] = AM_VOL; - tm = GET_FATTIME(); - ST_DWORD(dj.dir+DIR_WrtTime, tm); - dj.fs->wflag = 1; - res = sync_fs(dj.fs); - } - } - } - } - } - - LEAVE_FF(dj.fs, res); -} - -#endif /* !_FS_READONLY */ -#endif /* _USE_LABEL */ - - - -/*-----------------------------------------------------------------------*/ -/* Forward data to the stream directly (available on only tiny cfg) */ -/*-----------------------------------------------------------------------*/ -#if _USE_FORWARD && _FS_TINY - -FRESULT f_forward ( - FIL* fp, /* Pointer to the file object */ - UINT (*func)(const BYTE*,UINT), /* Pointer to the streaming function */ - UINT btf, /* Number of bytes to forward */ - UINT* bf /* Pointer to number of bytes forwarded */ -) -{ - FRESULT res; - DWORD remain, clst, sect; - UINT rcnt; - BYTE csect; - - - *bf = 0; /* Clear transfer byte counter */ - - res = validate(fp); /* Check validity of the object */ - if (res != FR_OK) LEAVE_FF(fp->fs, res); - if (fp->err) /* Check error */ - LEAVE_FF(fp->fs, (FRESULT)fp->err); - if (!(fp->flag & FA_READ)) /* Check access mode */ - LEAVE_FF(fp->fs, FR_DENIED); - - remain = fp->fsize - fp->fptr; - if (btf > remain) btf = (UINT)remain; /* Truncate btf by remaining bytes */ - - for ( ; btf && (*func)(0, 0); /* Repeat until all data transferred or stream becomes busy */ - fp->fptr += rcnt, *bf += rcnt, btf -= rcnt) { - csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1)); /* Sector offset in the cluster */ - if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */ - if (!csect) { /* On the cluster boundary? */ - clst = (fp->fptr == 0) ? /* On the top of the file? */ - fp->sclust : get_fat(fp->fs, fp->clust); - if (clst <= 1) ABORT(fp->fs, FR_INT_ERR); - if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR); - fp->clust = clst; /* Update current cluster */ - } - } - sect = clust2sect(fp->fs, fp->clust); /* Get current data sector */ - if (!sect) ABORT(fp->fs, FR_INT_ERR); - sect += csect; - if (move_window(fp->fs, sect) != FR_OK) /* Move sector window */ - ABORT(fp->fs, FR_DISK_ERR); - fp->dsect = sect; - rcnt = SS(fp->fs) - (WORD)(fp->fptr % SS(fp->fs)); /* Forward data from sector window */ - if (rcnt > btf) rcnt = btf; - rcnt = (*func)(&fp->fs->win[(WORD)fp->fptr % SS(fp->fs)], rcnt); - if (!rcnt) ABORT(fp->fs, FR_INT_ERR); - } - - LEAVE_FF(fp->fs, FR_OK); -} -#endif /* _USE_FORWARD */ - - - -#if _USE_MKFS && !_FS_READONLY -/*-----------------------------------------------------------------------*/ -/* Create File System on the Drive */ -/*-----------------------------------------------------------------------*/ -#define N_ROOTDIR 512 /* Number of root directory entries for FAT12/16 */ -#define N_FATS 1 /* Number of FATs (1 or 2) */ - - -FRESULT f_mkfs ( - const TCHAR* path, /* Logical drive number */ - BYTE sfd, /* Partitioning rule 0:FDISK, 1:SFD */ - UINT au /* Size of allocation unit in unit of byte or sector */ -) -{ - static const WORD vst[] = { 1024, 512, 256, 128, 64, 32, 16, 8, 4, 2, 0}; - static const WORD cst[] = {32768, 16384, 8192, 4096, 2048, 16384, 8192, 4096, 2048, 1024, 512}; - int vol; - BYTE fmt, md, sys, *tbl, pdrv, part; - DWORD n_clst, vs, n, wsect; - UINT i; - DWORD b_vol, b_fat, b_dir, b_data; /* LBA */ - DWORD n_vol, n_rsv, n_fat, n_dir; /* Size */ - FATFS *fs; - DSTATUS stat; - - - /* Check mounted drive and clear work area */ - if (sfd > 1) return FR_INVALID_PARAMETER; - vol = get_ldnumber(&path); - if (vol < 0) return FR_INVALID_DRIVE; - fs = FatFs[vol]; - if (!fs) return FR_NOT_ENABLED; - fs->fs_type = 0; - pdrv = LD2PD(vol); /* Physical drive */ - part = LD2PT(vol); /* Partition (0:auto detect, 1-4:get from partition table)*/ - - /* Get disk statics */ - stat = disk_initialize(pdrv); - if (stat & STA_NOINIT) return FR_NOT_READY; - if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; -#if _MAX_SS != _MIN_SS /* Get disk sector size */ - if (disk_ioctl(pdrv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK || SS(fs) > _MAX_SS || SS(fs) < _MIN_SS) - return FR_DISK_ERR; -#endif - if (_MULTI_PARTITION && part) { - /* Get partition information from partition table in the MBR */ - if (disk_read(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR; - if (LD_WORD(fs->win+BS_55AA) != 0xAA55) return FR_MKFS_ABORTED; - tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE]; - if (!tbl[4]) return FR_MKFS_ABORTED; /* No partition? */ - b_vol = LD_DWORD(tbl+8); /* Volume start sector */ - n_vol = LD_DWORD(tbl+12); /* Volume size */ - } else { - /* Create a partition in this function */ - if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &n_vol) != RES_OK || n_vol < 128) - return FR_DISK_ERR; - b_vol = (sfd) ? 0 : 63; /* Volume start sector */ - n_vol -= b_vol; /* Volume size */ - } - - if (au & (au - 1)) au = 0; - if (!au) { /* AU auto selection */ - vs = n_vol / (2000 / (SS(fs) / 512)); - for (i = 0; vs < vst[i]; i++) ; - au = cst[i]; - } - if (au >= _MIN_SS) au /= SS(fs); /* Number of sectors per cluster */ - if (!au) au = 1; - if (au > 128) au = 128; - - /* Pre-compute number of clusters and FAT sub-type */ - n_clst = n_vol / au; - fmt = FS_FAT12; - if (n_clst >= MIN_FAT16) fmt = FS_FAT16; - if (n_clst >= MIN_FAT32) fmt = FS_FAT32; - - /* Determine offset and size of FAT structure */ - if (fmt == FS_FAT32) { - n_fat = ((n_clst * 4) + 8 + SS(fs) - 1) / SS(fs); - n_rsv = 32; - n_dir = 0; - } else { - n_fat = (fmt == FS_FAT12) ? (n_clst * 3 + 1) / 2 + 3 : (n_clst * 2) + 4; - n_fat = (n_fat + SS(fs) - 1) / SS(fs); - n_rsv = 1; - n_dir = (DWORD)N_ROOTDIR * SZ_DIR / SS(fs); - } - b_fat = b_vol + n_rsv; /* FAT area start sector */ - b_dir = b_fat + n_fat * N_FATS; /* Directory area start sector */ - b_data = b_dir + n_dir; /* Data area start sector */ - if (n_vol < b_data + au - b_vol) return FR_MKFS_ABORTED; /* Too small volume */ - - /* Align data start sector to erase block boundary (for flash memory media) */ - if (disk_ioctl(pdrv, GET_BLOCK_SIZE, &n) != RES_OK || !n || n > 32768) n = 1; - n = (b_data + n - 1) & ~(n - 1); /* Next nearest erase block from current data start */ - n = (n - b_data) / N_FATS; - if (fmt == FS_FAT32) { /* FAT32: Move FAT offset */ - n_rsv += n; - b_fat += n; - } else { /* FAT12/16: Expand FAT size */ - n_fat += n; - } - - /* Determine number of clusters and final check of validity of the FAT sub-type */ - n_clst = (n_vol - n_rsv - n_fat * N_FATS - n_dir) / au; - if ( (fmt == FS_FAT16 && n_clst < MIN_FAT16) - || (fmt == FS_FAT32 && n_clst < MIN_FAT32)) - return FR_MKFS_ABORTED; - - /* Determine system ID in the partition table */ - if (fmt == FS_FAT32) { - sys = 0x0C; /* FAT32X */ - } else { - if (fmt == FS_FAT12 && n_vol < 0x10000) { - sys = 0x01; /* FAT12(<65536) */ - } else { - sys = (n_vol < 0x10000) ? 0x04 : 0x06; /* FAT16(<65536) : FAT12/16(>=65536) */ - } - } - - if (_MULTI_PARTITION && part) { - /* Update system ID in the partition table */ - tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE]; - tbl[4] = sys; - if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) /* Write it to teh MBR */ - return FR_DISK_ERR; - md = 0xF8; - } else { - if (sfd) { /* No partition table (SFD) */ - md = 0xF0; - } else { /* Create partition table (FDISK) */ - mem_set(fs->win, 0, SS(fs)); - tbl = fs->win+MBR_Table; /* Create partition table for single partition in the drive */ - tbl[1] = 1; /* Partition start head */ - tbl[2] = 1; /* Partition start sector */ - tbl[3] = 0; /* Partition start cylinder */ - tbl[4] = sys; /* System type */ - tbl[5] = 254; /* Partition end head */ - n = (b_vol + n_vol) / 63 / 255; - tbl[6] = (BYTE)(n >> 2 | 63); /* Partition end sector */ - tbl[7] = (BYTE)n; /* End cylinder */ - ST_DWORD(tbl+8, 63); /* Partition start in LBA */ - ST_DWORD(tbl+12, n_vol); /* Partition size in LBA */ - ST_WORD(fs->win+BS_55AA, 0xAA55); /* MBR signature */ - if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) /* Write it to the MBR */ - return FR_DISK_ERR; - md = 0xF8; - } - } - - /* Create BPB in the VBR */ - tbl = fs->win; /* Clear sector */ - mem_set(tbl, 0, SS(fs)); - mem_cpy(tbl, "\xEB\xFE\x90" "MSDOS5.0", 11);/* Boot jump code, OEM name */ - i = SS(fs); /* Sector size */ - ST_WORD(tbl+BPB_BytsPerSec, i); - tbl[BPB_SecPerClus] = (BYTE)au; /* Sectors per cluster */ - ST_WORD(tbl+BPB_RsvdSecCnt, n_rsv); /* Reserved sectors */ - tbl[BPB_NumFATs] = N_FATS; /* Number of FATs */ - i = (fmt == FS_FAT32) ? 0 : N_ROOTDIR; /* Number of root directory entries */ - ST_WORD(tbl+BPB_RootEntCnt, i); - if (n_vol < 0x10000) { /* Number of total sectors */ - ST_WORD(tbl+BPB_TotSec16, n_vol); - } else { - ST_DWORD(tbl+BPB_TotSec32, n_vol); - } - tbl[BPB_Media] = md; /* Media descriptor */ - ST_WORD(tbl+BPB_SecPerTrk, 63); /* Number of sectors per track */ - ST_WORD(tbl+BPB_NumHeads, 255); /* Number of heads */ - ST_DWORD(tbl+BPB_HiddSec, b_vol); /* Hidden sectors */ - n = GET_FATTIME(); /* Use current time as VSN */ - if (fmt == FS_FAT32) { - ST_DWORD(tbl+BS_VolID32, n); /* VSN */ - ST_DWORD(tbl+BPB_FATSz32, n_fat); /* Number of sectors per FAT */ - ST_DWORD(tbl+BPB_RootClus, 2); /* Root directory start cluster (2) */ - ST_WORD(tbl+BPB_FSInfo, 1); /* FSINFO record offset (VBR+1) */ - ST_WORD(tbl+BPB_BkBootSec, 6); /* Backup boot record offset (VBR+6) */ - tbl[BS_DrvNum32] = 0x80; /* Drive number */ - tbl[BS_BootSig32] = 0x29; /* Extended boot signature */ - mem_cpy(tbl+BS_VolLab32, "NO NAME " "FAT32 ", 19); /* Volume label, FAT signature */ - } else { - ST_DWORD(tbl+BS_VolID, n); /* VSN */ - ST_WORD(tbl+BPB_FATSz16, n_fat); /* Number of sectors per FAT */ - tbl[BS_DrvNum] = 0x80; /* Drive number */ - tbl[BS_BootSig] = 0x29; /* Extended boot signature */ - mem_cpy(tbl+BS_VolLab, "NO NAME " "FAT ", 19); /* Volume label, FAT signature */ - } - ST_WORD(tbl+BS_55AA, 0xAA55); /* Signature (Offset is fixed here regardless of sector size) */ - if (disk_write(pdrv, tbl, b_vol, 1) != RES_OK) /* Write it to the VBR sector */ - return FR_DISK_ERR; - if (fmt == FS_FAT32) /* Write backup VBR if needed (VBR+6) */ - disk_write(pdrv, tbl, b_vol + 6, 1); - - /* Initialize FAT area */ - wsect = b_fat; - for (i = 0; i < N_FATS; i++) { /* Initialize each FAT copy */ - mem_set(tbl, 0, SS(fs)); /* 1st sector of the FAT */ - n = md; /* Media descriptor byte */ - if (fmt != FS_FAT32) { - n |= (fmt == FS_FAT12) ? 0x00FFFF00 : 0xFFFFFF00; - ST_DWORD(tbl+0, n); /* Reserve cluster #0-1 (FAT12/16) */ - } else { - n |= 0xFFFFFF00; - ST_DWORD(tbl+0, n); /* Reserve cluster #0-1 (FAT32) */ - ST_DWORD(tbl+4, 0xFFFFFFFF); - ST_DWORD(tbl+8, 0x0FFFFFFF); /* Reserve cluster #2 for root directory */ - } - if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK) - return FR_DISK_ERR; - mem_set(tbl, 0, SS(fs)); /* Fill following FAT entries with zero */ - for (n = 1; n < n_fat; n++) { /* This loop may take a time on FAT32 volume due to many single sector writes */ - if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK) - return FR_DISK_ERR; - } - } - - /* Initialize root directory */ - i = (fmt == FS_FAT32) ? au : (UINT)n_dir; - do { - if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK) - return FR_DISK_ERR; - } while (--i); - -#if _USE_TRIM /* Erase data area if needed */ - { - DWORD eb[2]; - - eb[0] = wsect; eb[1] = wsect + (n_clst - ((fmt == FS_FAT32) ? 1 : 0)) * au - 1; - disk_ioctl(pdrv, CTRL_TRIM, eb); - } -#endif - - /* Create FSINFO if needed */ - if (fmt == FS_FAT32) { - ST_DWORD(tbl+FSI_LeadSig, 0x41615252); - ST_DWORD(tbl+FSI_StrucSig, 0x61417272); - ST_DWORD(tbl+FSI_Free_Count, n_clst - 1); /* Number of free clusters */ - ST_DWORD(tbl+FSI_Nxt_Free, 2); /* Last allocated cluster# */ - ST_WORD(tbl+BS_55AA, 0xAA55); - disk_write(pdrv, tbl, b_vol + 1, 1); /* Write original (VBR+1) */ - disk_write(pdrv, tbl, b_vol + 7, 1); /* Write backup (VBR+7) */ - } - - return (disk_ioctl(pdrv, CTRL_SYNC, 0) == RES_OK) ? FR_OK : FR_DISK_ERR; -} - - - -#if _MULTI_PARTITION -/*-----------------------------------------------------------------------*/ -/* Divide Physical Drive */ -/*-----------------------------------------------------------------------*/ - -FRESULT f_fdisk ( - BYTE pdrv, /* Physical drive number */ - const DWORD szt[], /* Pointer to the size table for each partitions */ - void* work /* Pointer to the working buffer */ -) -{ - UINT i, n, sz_cyl, tot_cyl, b_cyl, e_cyl, p_cyl; - BYTE s_hd, e_hd, *p, *buf = (BYTE*)work; - DSTATUS stat; - DWORD sz_disk, sz_part, s_part; - - - stat = disk_initialize(pdrv); - if (stat & STA_NOINIT) return FR_NOT_READY; - if (stat & STA_PROTECT) return FR_WRITE_PROTECTED; - if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_disk)) return FR_DISK_ERR; - - /* Determine CHS in the table regardless of the drive geometry */ - for (n = 16; n < 256 && sz_disk / n / 63 > 1024; n *= 2) ; - if (n == 256) n--; - e_hd = n - 1; - sz_cyl = 63 * n; - tot_cyl = sz_disk / sz_cyl; - - /* Create partition table */ - mem_set(buf, 0, _MAX_SS); - p = buf + MBR_Table; b_cyl = 0; - for (i = 0; i < 4; i++, p += SZ_PTE) { - p_cyl = (szt[i] <= 100U) ? (DWORD)tot_cyl * szt[i] / 100 : szt[i] / sz_cyl; - if (!p_cyl) continue; - s_part = (DWORD)sz_cyl * b_cyl; - sz_part = (DWORD)sz_cyl * p_cyl; - if (i == 0) { /* Exclude first track of cylinder 0 */ - s_hd = 1; - s_part += 63; sz_part -= 63; - } else { - s_hd = 0; - } - e_cyl = b_cyl + p_cyl - 1; - if (e_cyl >= tot_cyl) return FR_INVALID_PARAMETER; - - /* Set partition table */ - p[1] = s_hd; /* Start head */ - p[2] = (BYTE)((b_cyl >> 2) + 1); /* Start sector */ - p[3] = (BYTE)b_cyl; /* Start cylinder */ - p[4] = 0x06; /* System type (temporary setting) */ - p[5] = e_hd; /* End head */ - p[6] = (BYTE)((e_cyl >> 2) + 63); /* End sector */ - p[7] = (BYTE)e_cyl; /* End cylinder */ - ST_DWORD(p + 8, s_part); /* Start sector in LBA */ - ST_DWORD(p + 12, sz_part); /* Partition size */ - - /* Next partition */ - b_cyl += p_cyl; - } - ST_WORD(p, 0xAA55); - - /* Write it to the MBR */ - return (disk_write(pdrv, buf, 0, 1) != RES_OK || disk_ioctl(pdrv, CTRL_SYNC, 0) != RES_OK) ? FR_DISK_ERR : FR_OK; -} - - -#endif /* _MULTI_PARTITION */ -#endif /* _USE_MKFS && !_FS_READONLY */ - - - - -#if _USE_STRFUNC -/*-----------------------------------------------------------------------*/ -/* Get a string from the file */ -/*-----------------------------------------------------------------------*/ - -TCHAR* f_gets ( - TCHAR* buff, /* Pointer to the string buffer to read */ - int len, /* Size of string buffer (characters) */ - FIL* fp /* Pointer to the file object */ -) -{ - int n = 0; - TCHAR c, *p = buff; - BYTE s[2]; - UINT rc; - - - while (n < len - 1) { /* Read characters until buffer gets filled */ -#if _USE_LFN && _LFN_UNICODE -#if _STRF_ENCODE == 3 /* Read a character in UTF-8 */ - f_read(fp, s, 1, &rc); - if (rc != 1) break; - c = s[0]; - if (c >= 0x80) { - if (c < 0xC0) continue; /* Skip stray trailer */ - if (c < 0xE0) { /* Two-byte sequence */ - f_read(fp, s, 1, &rc); - if (rc != 1) break; - c = (c & 0x1F) << 6 | (s[0] & 0x3F); - if (c < 0x80) c = '?'; - } else { - if (c < 0xF0) { /* Three-byte sequence */ - f_read(fp, s, 2, &rc); - if (rc != 2) break; - c = c << 12 | (s[0] & 0x3F) << 6 | (s[1] & 0x3F); - if (c < 0x800) c = '?'; - } else { /* Reject four-byte sequence */ - c = '?'; - } - } - } -#elif _STRF_ENCODE == 2 /* Read a character in UTF-16BE */ - f_read(fp, s, 2, &rc); - if (rc != 2) break; - c = s[1] + (s[0] << 8); -#elif _STRF_ENCODE == 1 /* Read a character in UTF-16LE */ - f_read(fp, s, 2, &rc); - if (rc != 2) break; - c = s[0] + (s[1] << 8); -#else /* Read a character in ANSI/OEM */ - f_read(fp, s, 1, &rc); - if (rc != 1) break; - c = s[0]; - if (IsDBCS1(c)) { - f_read(fp, s, 1, &rc); - if (rc != 1) break; - c = (c << 8) + s[0]; - } - c = ff_convert(c, 1); /* OEM -> Unicode */ - if (!c) c = '?'; -#endif -#else /* Read a character without conversion */ - f_read(fp, s, 1, &rc); - if (rc != 1) break; - c = s[0]; -#endif - if (_USE_STRFUNC == 2 && c == '\r') continue; /* Strip '\r' */ - *p++ = c; - n++; - if (c == '\n') break; /* Break on EOL */ - } - *p = 0; - return n ? buff : 0; /* When no data read (eof or error), return with error. */ -} - - - -#if !_FS_READONLY -#include -/*-----------------------------------------------------------------------*/ -/* Put a character to the file */ -/*-----------------------------------------------------------------------*/ - -typedef struct { - FIL* fp; - int idx, nchr; - BYTE buf[64]; -} putbuff; - - -static -void putc_bfd ( - putbuff* pb, - TCHAR c -) -{ - UINT bw; - int i; - - - if (_USE_STRFUNC == 2 && c == '\n') /* LF -> CRLF conversion */ - putc_bfd(pb, '\r'); - - i = pb->idx; /* Buffer write index (-1:error) */ - if (i < 0) return; - -#if _USE_LFN && _LFN_UNICODE -#if _STRF_ENCODE == 3 /* Write a character in UTF-8 */ - if (c < 0x80) { /* 7-bit */ - pb->buf[i++] = (BYTE)c; - } else { - if (c < 0x800) { /* 11-bit */ - pb->buf[i++] = (BYTE)(0xC0 | c >> 6); - } else { /* 16-bit */ - pb->buf[i++] = (BYTE)(0xE0 | c >> 12); - pb->buf[i++] = (BYTE)(0x80 | (c >> 6 & 0x3F)); - } - pb->buf[i++] = (BYTE)(0x80 | (c & 0x3F)); - } -#elif _STRF_ENCODE == 2 /* Write a character in UTF-16BE */ - pb->buf[i++] = (BYTE)(c >> 8); - pb->buf[i++] = (BYTE)c; -#elif _STRF_ENCODE == 1 /* Write a character in UTF-16LE */ - pb->buf[i++] = (BYTE)c; - pb->buf[i++] = (BYTE)(c >> 8); -#else /* Write a character in ANSI/OEM */ - c = ff_convert(c, 0); /* Unicode -> OEM */ - if (!c) c = '?'; - if (c >= 0x100) - pb->buf[i++] = (BYTE)(c >> 8); - pb->buf[i++] = (BYTE)c; -#endif -#else /* Write a character without conversion */ - pb->buf[i++] = (BYTE)c; -#endif - - if (i >= (int)(sizeof pb->buf) - 3) { /* Write buffered characters to the file */ - f_write(pb->fp, pb->buf, (UINT)i, &bw); - i = (bw == (UINT)i) ? 0 : -1; - } - pb->idx = i; - pb->nchr++; -} - - - -int f_putc ( - TCHAR c, /* A character to be output */ - FIL* fp /* Pointer to the file object */ -) -{ - putbuff pb; - UINT nw; - - - pb.fp = fp; /* Initialize output buffer */ - pb.nchr = pb.idx = 0; - - putc_bfd(&pb, c); /* Put a character */ - - if ( pb.idx >= 0 /* Flush buffered characters to the file */ - && f_write(pb.fp, pb.buf, (UINT)pb.idx, &nw) == FR_OK - && (UINT)pb.idx == nw) return pb.nchr; - return EOF; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Put a string to the file */ -/*-----------------------------------------------------------------------*/ - -int f_puts ( - const TCHAR* str, /* Pointer to the string to be output */ - FIL* fp /* Pointer to the file object */ -) -{ - putbuff pb; - UINT nw; - - - pb.fp = fp; /* Initialize output buffer */ - pb.nchr = pb.idx = 0; - - while (*str) /* Put the string */ - putc_bfd(&pb, *str++); - - if ( pb.idx >= 0 /* Flush buffered characters to the file */ - && f_write(pb.fp, pb.buf, (UINT)pb.idx, &nw) == FR_OK - && (UINT)pb.idx == nw) return pb.nchr; - return EOF; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Put a formatted string to the file */ -/*-----------------------------------------------------------------------*/ - -int f_printf ( - FIL* fp, /* Pointer to the file object */ - const TCHAR* fmt, /* Pointer to the format string */ - ... /* Optional arguments... */ -) -{ - va_list arp; - BYTE f, r; - UINT nw, i, j, w; - DWORD v; - TCHAR c, d, s[16], *p; - putbuff pb; - - - pb.fp = fp; /* Initialize output buffer */ - pb.nchr = pb.idx = 0; - - va_start(arp, fmt); - - for (;;) { - c = *fmt++; - if (c == 0) break; /* End of string */ - if (c != '%') { /* Non escape character */ - putc_bfd(&pb, c); - continue; - } - w = f = 0; - c = *fmt++; - if (c == '0') { /* Flag: '0' padding */ - f = 1; c = *fmt++; - } else { - if (c == '-') { /* Flag: left justified */ - f = 2; c = *fmt++; - } - } - while (IsDigit(c)) { /* Precision */ - w = w * 10 + c - '0'; - c = *fmt++; - } - if (c == 'l' || c == 'L') { /* Prefix: Size is long int */ - f |= 4; c = *fmt++; - } - if (!c) break; - d = c; - if (IsLower(d)) d -= 0x20; - switch (d) { /* Type is... */ - case 'S' : /* String */ - p = va_arg(arp, TCHAR*); - for (j = 0; p[j]; j++) ; - if (!(f & 2)) { - while (j++ < w) putc_bfd(&pb, ' '); - } - while (*p) putc_bfd(&pb, *p++); - while (j++ < w) putc_bfd(&pb, ' '); - continue; - case 'C' : /* Character */ - putc_bfd(&pb, (TCHAR)va_arg(arp, int)); continue; - case 'B' : /* Binary */ - r = 2; break; - case 'O' : /* Octal */ - r = 8; break; - case 'D' : /* Signed decimal */ - case 'U' : /* Unsigned decimal */ - r = 10; break; - case 'X' : /* Hexdecimal */ - r = 16; break; - default: /* Unknown type (pass-through) */ - putc_bfd(&pb, c); continue; - } - - /* Get an argument and put it in numeral */ - v = (f & 4) ? (DWORD)va_arg(arp, long) : ((d == 'D') ? (DWORD)(long)va_arg(arp, int) : (DWORD)va_arg(arp, unsigned int)); - if (d == 'D' && (v & 0x80000000)) { - v = 0 - v; - f |= 8; - } - i = 0; - do { - d = (TCHAR)(v % r); v /= r; - if (d > 9) d += (c == 'x') ? 0x27 : 0x07; - s[i++] = d + '0'; - } while (v && i < sizeof s / sizeof s[0]); - if (f & 8) s[i++] = '-'; - j = i; d = (f & 1) ? '0' : ' '; - while (!(f & 2) && j++ < w) putc_bfd(&pb, d); - do putc_bfd(&pb, s[--i]); while (i); - while (j++ < w) putc_bfd(&pb, d); - } - - va_end(arp); - - if ( pb.idx >= 0 /* Flush buffered characters to the file */ - && f_write(pb.fp, pb.buf, (UINT)pb.idx, &nw) == FR_OK - && (UINT)pb.idx == nw) return pb.nchr; - return EOF; -} - -#endif /* !_FS_READONLY */ -#endif /* _USE_STRFUNC */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.h deleted file mode 100644 index 5eaad5f..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ff.h +++ /dev/null @@ -1,341 +0,0 @@ -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module include file R0.10c (C)ChaN, 2014 -/----------------------------------------------------------------------------/ -/ FatFs module is a generic FAT file system module for small embedded systems. -/ This is a free software that opened for education, research and commercial -/ developments under license policy of following terms. -/ -/ Copyright (C) 2014, ChaN, all right reserved. -/ -/ * The FatFs module is a free software and there is NO WARRANTY. -/ * No restriction on use. You can use, modify and redistribute it for -/ personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY. -/ * Redistributions of source code must retain the above copyright notice. -/ -/----------------------------------------------------------------------------*/ - -#ifndef _FATFS -#define _FATFS 80376 /* Revision ID */ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "integer.h" /* Basic integer types */ -#include "ffconf.h" /* FatFs configuration options */ -#if _FATFS != _FFCONF -#error Wrong configuration file (ffconf.h). -#endif - - - -/* Definitions of volume management */ - -#if _MULTI_PARTITION /* Multiple partition configuration */ -typedef struct { - BYTE pd; /* Physical drive number */ - BYTE pt; /* Partition: 0:Auto detect, 1-4:Forced partition) */ -} PARTITION; -extern PARTITION VolToPart[]; /* Volume - Partition resolution table */ -#define LD2PD(vol) (VolToPart[vol].pd) /* Get physical drive number */ -#define LD2PT(vol) (VolToPart[vol].pt) /* Get partition index */ - -#else /* Single partition configuration */ -#define LD2PD(vol) (BYTE)(vol) /* Each logical drive is bound to the same physical drive number */ -#define LD2PT(vol) 0 /* Find first valid partition or in SFD */ - -#endif - - - -/* Type of path name strings on FatFs API */ - -#if _LFN_UNICODE /* Unicode string */ -#if !_USE_LFN -#error _LFN_UNICODE must be 0 at non-LFN cfg. -#endif -#ifndef _INC_TCHAR -typedef WCHAR TCHAR; -#define _T(x) L ## x -#define _TEXT(x) L ## x -#endif - -#else /* ANSI/OEM string */ -#ifndef _INC_TCHAR -typedef char TCHAR; -#define _T(x) x -#define _TEXT(x) x -#endif - -#endif - - - -/* File system object structure (FATFS) */ - -typedef struct { - BYTE fs_type; /* FAT sub-type (0:Not mounted) */ - BYTE drv; /* Physical drive number */ - BYTE csize; /* Sectors per cluster (1,2,4...128) */ - BYTE n_fats; /* Number of FAT copies (1 or 2) */ - BYTE wflag; /* win[] flag (b0:dirty) */ - BYTE fsi_flag; /* FSINFO flags (b7:disabled, b0:dirty) */ - WORD id; /* File system mount ID */ - WORD n_rootdir; /* Number of root directory entries (FAT12/16) */ -#if _MAX_SS != _MIN_SS - WORD ssize; /* Bytes per sector (512, 1024, 2048 or 4096) */ -#endif -#if _FS_REENTRANT - _SYNC_t sobj; /* Identifier of sync object */ -#endif -#if !_FS_READONLY - DWORD last_clust; /* Last allocated cluster */ - DWORD free_clust; /* Number of free clusters */ -#endif -#if _FS_RPATH - DWORD cdir; /* Current directory start cluster (0:root) */ -#endif - DWORD n_fatent; /* Number of FAT entries, = number of clusters + 2 */ - DWORD fsize; /* Sectors per FAT */ - DWORD volbase; /* Volume start sector */ - DWORD fatbase; /* FAT start sector */ - DWORD dirbase; /* Root directory start sector (FAT32:Cluster#) */ - DWORD database; /* Data start sector */ - DWORD winsect; /* Current sector appearing in the win[] */ - BYTE win[_MAX_SS]; /* Disk access window for Directory, FAT (and file data at tiny cfg) */ -} FATFS; - - - -/* File object structure (FIL) */ - -typedef struct { - FATFS* fs; /* Pointer to the related file system object (**do not change order**) */ - WORD id; /* Owner file system mount ID (**do not change order**) */ - BYTE flag; /* Status flags */ - BYTE err; /* Abort flag (error code) */ - DWORD fptr; /* File read/write pointer (Zeroed on file open) */ - DWORD fsize; /* File size */ - DWORD sclust; /* File start cluster (0:no cluster chain, always 0 when fsize is 0) */ - DWORD clust; /* Current cluster of fpter (not valid when fprt is 0) */ - DWORD dsect; /* Sector number appearing in buf[] (0:invalid) */ -#if !_FS_READONLY - DWORD dir_sect; /* Sector number containing the directory entry */ - BYTE* dir_ptr; /* Pointer to the directory entry in the win[] */ -#endif -#if _USE_FASTSEEK - DWORD* cltbl; /* Pointer to the cluster link map table (Nulled on file open) */ -#endif -#if _FS_LOCK - UINT lockid; /* File lock ID origin from 1 (index of file semaphore table Files[]) */ -#endif -#if !_FS_TINY - BYTE buf[_MAX_SS]; /* File private data read/write window */ -#endif -} FIL; - - - -/* Directory object structure (DIR) */ - -typedef struct { - FATFS* fs; /* Pointer to the owner file system object (**do not change order**) */ - WORD id; /* Owner file system mount ID (**do not change order**) */ - WORD index; /* Current read/write index number */ - DWORD sclust; /* Table start cluster (0:Root dir) */ - DWORD clust; /* Current cluster */ - DWORD sect; /* Current sector */ - BYTE* dir; /* Pointer to the current SFN entry in the win[] */ - BYTE* fn; /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */ -#if _FS_LOCK - UINT lockid; /* File lock ID (index of file semaphore table Files[]) */ -#endif -#if _USE_LFN - WCHAR* lfn; /* Pointer to the LFN working buffer */ - WORD lfn_idx; /* Last matched LFN index number (0xFFFF:No LFN) */ -#endif -} DIR; - - - -/* File status structure (FILINFO) */ - -typedef struct { - DWORD fsize; /* File size */ - WORD fdate; /* Last modified date */ - WORD ftime; /* Last modified time */ - BYTE fattrib; /* Attribute */ - TCHAR fname[13]; /* Short file name (8.3 format) */ -#if _USE_LFN - TCHAR* lfname; /* Pointer to the LFN buffer */ - UINT lfsize; /* Size of LFN buffer in TCHAR */ -#endif -} FILINFO; - - - -/* File function return code (FRESULT) */ - -typedef enum { - FR_OK = 0, /* (0) Succeeded */ - FR_DISK_ERR, /* (1) A hard error occurred in the low level disk I/O layer */ - FR_INT_ERR, /* (2) Assertion failed */ - FR_NOT_READY, /* (3) The physical drive cannot work */ - FR_NO_FILE, /* (4) Could not find the file */ - FR_NO_PATH, /* (5) Could not find the path */ - FR_INVALID_NAME, /* (6) The path name format is invalid */ - FR_DENIED, /* (7) Access denied due to prohibited access or directory full */ - FR_EXIST, /* (8) Access denied due to prohibited access */ - FR_INVALID_OBJECT, /* (9) The file/directory object is invalid */ - FR_WRITE_PROTECTED, /* (10) The physical drive is write protected */ - FR_INVALID_DRIVE, /* (11) The logical drive number is invalid */ - FR_NOT_ENABLED, /* (12) The volume has no work area */ - FR_NO_FILESYSTEM, /* (13) There is no valid FAT volume */ - FR_MKFS_ABORTED, /* (14) The f_mkfs() aborted due to any parameter error */ - FR_TIMEOUT, /* (15) Could not get a grant to access the volume within defined period */ - FR_LOCKED, /* (16) The operation is rejected according to the file sharing policy */ - FR_NOT_ENOUGH_CORE, /* (17) LFN working buffer could not be allocated */ - FR_TOO_MANY_OPEN_FILES, /* (18) Number of open files > _FS_SHARE */ - FR_INVALID_PARAMETER /* (19) Given parameter is invalid */ -} FRESULT; - - - -/*--------------------------------------------------------------*/ -/* FatFs module application interface */ - -FRESULT f_open (FIL* fp, const TCHAR* path, BYTE mode); /* Open or create a file */ -FRESULT f_close (FIL* fp); /* Close an open file object */ -FRESULT f_read (FIL* fp, void* buff, UINT btr, UINT* br); /* Read data from a file */ -FRESULT f_write (FIL* fp, const void* buff, UINT btw, UINT* bw); /* Write data to a file */ -FRESULT f_forward (FIL* fp, UINT(*func)(const BYTE*,UINT), UINT btf, UINT* bf); /* Forward data to the stream */ -FRESULT f_lseek (FIL* fp, DWORD ofs); /* Move file pointer of a file object */ -FRESULT f_truncate (FIL* fp); /* Truncate file */ -FRESULT f_sync (FIL* fp); /* Flush cached data of a writing file */ -FRESULT f_opendir (DIR* dp, const TCHAR* path); /* Open a directory */ -FRESULT f_closedir (DIR* dp); /* Close an open directory */ -FRESULT f_readdir (DIR* dp, FILINFO* fno); /* Read a directory item */ -FRESULT f_mkdir (const TCHAR* path); /* Create a sub directory */ -FRESULT f_unlink (const TCHAR* path); /* Delete an existing file or directory */ -FRESULT f_rename (const TCHAR* path_old, const TCHAR* path_new); /* Rename/Move a file or directory */ -FRESULT f_stat (const TCHAR* path, FILINFO* fno); /* Get file status */ -FRESULT f_chmod (const TCHAR* path, BYTE value, BYTE mask); /* Change attribute of the file/dir */ -FRESULT f_utime (const TCHAR* path, const FILINFO* fno); /* Change times-tamp of the file/dir */ -FRESULT f_chdir (const TCHAR* path); /* Change current directory */ -FRESULT f_chdrive (const TCHAR* path); /* Change current drive */ -FRESULT f_getcwd (TCHAR* buff, UINT len); /* Get current directory */ -FRESULT f_getfree (const TCHAR* path, DWORD* nclst, FATFS** fatfs); /* Get number of free clusters on the drive */ -FRESULT f_getlabel (const TCHAR* path, TCHAR* label, DWORD* vsn); /* Get volume label */ -FRESULT f_setlabel (const TCHAR* label); /* Set volume label */ -FRESULT f_mount (FATFS* fs, const TCHAR* path, BYTE opt); /* Mount/Unmount a logical drive */ -FRESULT f_mkfs (const TCHAR* path, BYTE sfd, UINT au); /* Create a file system on the volume */ -FRESULT f_fdisk (BYTE pdrv, const DWORD szt[], void* work); /* Divide a physical drive into some partitions */ -int f_putc (TCHAR c, FIL* fp); /* Put a character to the file */ -int f_puts (const TCHAR* str, FIL* cp); /* Put a string to the file */ -int f_printf (FIL* fp, const TCHAR* str, ...); /* Put a formatted string to the file */ -TCHAR* f_gets (TCHAR* buff, int len, FIL* fp); /* Get a string from the file */ - -#define f_eof(fp) ((int)((fp)->fptr == (fp)->fsize)) -#define f_error(fp) ((fp)->err) -#define f_tell(fp) ((fp)->fptr) -#define f_size(fp) ((fp)->fsize) - -#ifndef EOF -#define EOF (-1) -#endif - - - - -/*--------------------------------------------------------------*/ -/* Additional user defined functions */ - -/* RTC function */ -#if !_FS_READONLY && !_FS_NORTC -DWORD get_fattime (void); -#endif - -/* Unicode support functions */ -#if _USE_LFN /* Unicode - OEM code conversion */ -WCHAR ff_convert (WCHAR chr, UINT dir); /* OEM-Unicode bidirectional conversion */ -WCHAR ff_wtoupper (WCHAR chr); /* Unicode upper-case conversion */ -#if _USE_LFN == 3 /* Memory functions */ -void* ff_memalloc (UINT msize); /* Allocate memory block */ -void ff_memfree (void* mblock); /* Free memory block */ -#endif -#endif - -/* Sync functions */ -#if _FS_REENTRANT -int ff_cre_syncobj (BYTE vol, _SYNC_t* sobj); /* Create a sync object */ -int ff_req_grant (_SYNC_t sobj); /* Lock sync object */ -void ff_rel_grant (_SYNC_t sobj); /* Unlock sync object */ -int ff_del_syncobj (_SYNC_t sobj); /* Delete a sync object */ -#endif - - - - -/*--------------------------------------------------------------*/ -/* Flags and offset address */ - - -/* File access control and file status flags (FIL.flag) */ - -#define FA_READ 0x01 -#define FA_OPEN_EXISTING 0x00 - -#if !_FS_READONLY -#define FA_WRITE 0x02 -#define FA_CREATE_NEW 0x04 -#define FA_CREATE_ALWAYS 0x08 -#define FA_OPEN_ALWAYS 0x10 -#define FA__WRITTEN 0x20 -#define FA__DIRTY 0x40 -#endif - - -/* FAT sub type (FATFS.fs_type) */ - -#define FS_FAT12 1 -#define FS_FAT16 2 -#define FS_FAT32 3 - - -/* File attribute bits for directory entry */ - -#define AM_RDO 0x01 /* Read only */ -#define AM_HID 0x02 /* Hidden */ -#define AM_SYS 0x04 /* System */ -#define AM_VOL 0x08 /* Volume label */ -#define AM_LFN 0x0F /* LFN entry */ -#define AM_DIR 0x10 /* Directory */ -#define AM_ARC 0x20 /* Archive */ -#define AM_MASK 0x3F /* Mask of defined bits */ - - -/* Fast seek feature */ -#define CREATE_LINKMAP 0xFFFFFFFF - - - -/*--------------------------------*/ -/* Multi-byte word access macros */ - -#if _WORD_ACCESS == 1 /* Enable word access to the FAT structure */ -#define LD_WORD(ptr) (WORD)(*(WORD*)(BYTE*)(ptr)) -#define LD_DWORD(ptr) (DWORD)(*(DWORD*)(BYTE*)(ptr)) -#define ST_WORD(ptr,val) *(WORD*)(BYTE*)(ptr)=(WORD)(val) -#define ST_DWORD(ptr,val) *(DWORD*)(BYTE*)(ptr)=(DWORD)(val) -#else /* Use byte-by-byte access to the FAT structure */ -#define LD_WORD(ptr) (WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr)) -#define LD_DWORD(ptr) (DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr)) -#define ST_WORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8) -#define ST_DWORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24) -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* _FATFS */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h deleted file mode 100644 index 0ae6f01..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h +++ /dev/null @@ -1,271 +0,0 @@ -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.10c (C)ChaN, 2014 -/---------------------------------------------------------------------------*/ -#include "ch.h" - -#define _FFCONF 80376 /* Revision ID */ - -/*---------------------------------------------------------------------------/ -/ Functions and Buffer Configurations -/---------------------------------------------------------------------------*/ - -#define _FS_TINY 0 -/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) -/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS -/ bytes. Instead of private sector buffer eliminated from the file object, -/ common sector buffer in the file system object (FATFS) is used for the file -/ data transfer. */ - - -#define _FS_READONLY 0 -/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) -/ Read-only configuration removes basic writing API functions, f_write(), -/ f_sync(), f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), -/ f_getfree() and optional writing functions as well. */ - - -#define _FS_MINIMIZE 0 -/* This option defines minimization level to remove some API functions. -/ -/ 0: All basic functions are enabled. -/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(), -/ f_truncate() and f_rename() function are removed. -/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. -/ 3: f_lseek() function is removed in addition to 2. */ - - -#define _USE_STRFUNC 0 -/* This option switches string functions, f_gets(), f_putc(), f_puts() and -/ f_printf(). -/ -/ 0: Disable string functions. -/ 1: Enable without LF-CRLF conversion. -/ 2: Enable with LF-CRLF conversion. */ - - -#define _USE_MKFS 0 -/* This option switches f_mkfs() function. (0:Disable or 1:Enable) -/ To enable it, also _FS_READONLY need to be set to 0. */ - - -#define _USE_FASTSEEK 0 -/* This option switches fast seek feature. (0:Disable or 1:Enable) */ - - -#define _USE_LABEL 0 -/* This option switches volume label functions, f_getlabel() and f_setlabel(). -/ (0:Disable or 1:Enable) */ - - -#define _USE_FORWARD 0 -/* This option switches f_forward() function. (0:Disable or 1:Enable) */ -/* To enable it, also _FS_TINY need to be set to 1. */ - - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/---------------------------------------------------------------------------*/ - -#define _CODE_PAGE 437 -/* This option specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows) -/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) -/ 949 - Korean (DBCS, OEM, Windows) -/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) -/ 1250 - Central Europe (Windows) -/ 1251 - Cyrillic (Windows) -/ 1252 - Latin 1 (Windows) -/ 1253 - Greek (Windows) -/ 1254 - Turkish (Windows) -/ 1255 - Hebrew (Windows) -/ 1256 - Arabic (Windows) -/ 1257 - Baltic (Windows) -/ 1258 - Vietnam (OEM, Windows) -/ 437 - U.S. (OEM) -/ 720 - Arabic (OEM) -/ 737 - Greek (OEM) -/ 775 - Baltic (OEM) -/ 850 - Multilingual Latin 1 (OEM) -/ 858 - Multilingual Latin 1 + Euro (OEM) -/ 852 - Latin 2 (OEM) -/ 855 - Cyrillic (OEM) -/ 866 - Russian (OEM) -/ 857 - Turkish (OEM) -/ 862 - Hebrew (OEM) -/ 874 - Thai (OEM, Windows) -/ 1 - ASCII (No extended character. Valid for only non-LFN configuration.) */ - - -#define _USE_LFN 0 -#define _MAX_LFN 255 -/* The _USE_LFN option switches the LFN feature. -/ -/ 0: Disable LFN feature. _MAX_LFN has no effect. -/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must -/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. -/ When use stack for the working buffer, take care on stack overflow. When use heap -/ memory for the working buffer, memory management functions, ff_memalloc() and -/ ff_memfree(), must be added to the project. */ - - -#define _LFN_UNICODE 0 -/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode) -/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE -/ to 1. This option also affects behavior of string I/O functions. */ - - -#define _STRF_ENCODE 3 -/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to -/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf(). -/ -/ 0: ANSI/OEM -/ 1: UTF-16LE -/ 2: UTF-16BE -/ 3: UTF-8 -/ -/ When _LFN_UNICODE is 0, this option has no effect. */ - - -#define _FS_RPATH 0 -/* This option configures relative path feature. -/ -/ 0: Disable relative path feature and remove related functions. -/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available. -/ 2: f_getcwd() function is available in addition to 1. -/ -/ Note that directory items read via f_readdir() are affected by this option. */ - - -/*---------------------------------------------------------------------------/ -/ Drive/Volume Configurations -/---------------------------------------------------------------------------*/ - -#define _VOLUMES 1 -/* Number of volumes (logical drives) to be used. */ - - -#define _STR_VOLUME_ID 0 -#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3" -/* _STR_VOLUME_ID option switches string volume ID feature. -/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive -/ number in the path name. _VOLUME_STRS defines the drive ID strings for each -/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for -/ the drive ID strings are: A-Z and 0-9. */ - - -#define _MULTI_PARTITION 0 -/* This option switches multi-partition feature. By default (0), each logical drive -/ number is bound to the same physical drive number and only an FAT volume found on -/ the physical drive will be mounted. When multi-partition feature is enabled (1), -/ each logical drive number is bound to arbitrary physical drive and partition -/ listed in the VolToPart[]. Also f_fdisk() funciton will be enabled. */ - - -#define _MIN_SS 512 -#define _MAX_SS 512 -/* These options configure the range of sector size to be supported. (512, 1024, -/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and -/ harddisk. But a larger value may be required for on-board flash memory and some -/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured -/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the -/ disk_ioctl() function. */ - - -#define _USE_TRIM 0 -/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable) -/ To enable Trim feature, also CTRL_TRIM command should be implemented to the -/ disk_ioctl() function. */ - - -#define _FS_NOFSINFO 0 -/* If you need to know correct free space on the FAT32 volume, set bit 0 of this -/ option, and f_getfree() function at first time after volume mount will force -/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. -/ -/ bit0=0: Use free cluster count in the FSINFO if available. -/ bit0=1: Do not trust free cluster count in the FSINFO. -/ bit1=0: Use last allocated cluster number in the FSINFO if available. -/ bit1=1: Do not trust last allocated cluster number in the FSINFO. -*/ - - - -/*---------------------------------------------------------------------------/ -/ System Configurations -/---------------------------------------------------------------------------*/ - -#define _FS_NORTC 0 -#define _NORTC_MON 11 -#define _NORTC_MDAY 9 -#define _NORTC_YEAR 2014 -/* The _FS_NORTC option switches timestamp feature. If the system does not have -/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable -/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp -/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR. -/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need -/ to be added to the project to read current time form RTC. _NORTC_MON, -/ _NORTC_MDAY and _NORTC_YEAR have no effect. -/ These options have no effect at read-only configuration (_FS_READONLY == 1). */ - - -#define _FS_LOCK 0 -/* The _FS_LOCK option switches file lock feature to control duplicated file open -/ and illegal operation to open objects. This option must be 0 when _FS_READONLY -/ is 1. -/ -/ 0: Disable file lock feature. To avoid volume corruption, application program -/ should avoid illegal open, remove and rename to the open objects. -/ >0: Enable file lock feature. The value defines how many files/sub-directories -/ can be opened simultaneously under file lock control. Note that the file -/ lock feature is independent of re-entrancy. */ - - -#define _FS_REENTRANT 0 -#define _FS_TIMEOUT S2ST(10) -typedef semaphore_t * _SYNC_t; -/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs -/ module itself. Note that regardless of this option, file access to different -/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() -/ and f_fdisk() function, are always not re-entrant. Only file/directory access -/ to the same volume is under control of this feature. -/ -/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect. -/ 1: Enable re-entrancy. Also user provided synchronization handlers, -/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() -/ function, must be added to the project. Samples are available in -/ option/syscall.c. -/ -/ The _FS_TIMEOUT defines timeout period in unit of time tick. -/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, -/ SemaphoreHandle_t and etc.. */ - - -#define _WORD_ACCESS 0 -/* The _WORD_ACCESS option is an only platform dependent option. It defines -/ which access method is used to the word data on the FAT volume. -/ -/ 0: Byte-by-byte access. Always compatible with all platforms. -/ 1: Word access. Do not choose this unless under both the following conditions. -/ -/ * Address misaligned memory access is always allowed to ALL instructions. -/ * Byte order on the memory is little-endian. -/ -/ If it is the case, _WORD_ACCESS can also be set to 1 to reduce code size. -/ Following table shows allowable settings of some processor types. -/ -/ ARM7TDMI 0 ColdFire 0 V850E 0 -/ Cortex-M3 0 Z80 0/1 V850ES 0/1 -/ Cortex-M0 0 x86 0/1 TLCS-870 0/1 -/ AVR 0/1 RX600(LE) 0/1 TLCS-900 0/1 -/ AVR32 0 RL78 0 R32C 0 -/ PIC18 0/1 SH-2 0 M16C 0/1 -/ PIC24 0 H8S 0 MSP430 0 -/ PIC32 0 H8/300H 0 8051 0/1 -*/ - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf.h deleted file mode 100644 index 9ddbb1b..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 115200 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 64 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h deleted file mode 100644 index 49db499..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the TIMCAP subsystem. - */ -#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) -#define HAL_USE_TIMCAP FALSE -#endif - -/** - * @brief Enables the USBH subsystem. - */ -#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) -#define HAL_USE_USBH TRUE -#endif - - -/*===========================================================================*/ -/* USBH driver related settings. */ -/*===========================================================================*/ - -/* main driver */ -#define HAL_USBH_PORT_DEBOUNCE_TIME 200 -#define HAL_USBH_PORT_RESET_TIMEOUT 500 -#define HAL_USBH_DEVICE_ADDRESS_STABILIZATION 20 - -/* MSD */ -#define HAL_USBH_USE_MSD 1 - -#define HAL_USBHMSD_MAX_LUNS 1 -#define HAL_USBHMSD_MAX_INSTANCES 1 - -/* IAD */ -#define HAL_USBH_USE_FTDI 1 - -#define HAL_USBHFTDI_MAX_PORTS 1 -#define HAL_USBHFTDI_MAX_INSTANCES 1 -#define HAL_USBHFTDI_DEFAULT_SPEED 9600 -#define HAL_USBHFTDI_DEFAULT_FRAMING (USBHFTDI_FRAMING_DATABITS_8 | USBHFTDI_FRAMING_PARITY_NONE | USBHFTDI_FRAMING_STOP_BITS_1) -#define HAL_USBHFTDI_DEFAULT_HANDSHAKE USBHFTDI_HANDSHAKE_NONE -#define HAL_USBHFTDI_DEFAULT_XON 0x11 -#define HAL_USBHFTDI_DEFAULT_XOFF 0x13 - - -/* IAD */ -#define HAL_USBH_USE_IAD 0 - -/* UVC */ -#define HAL_USBH_USE_UVC 0 - -#define HAL_USBHUVC_MAX_INSTANCES 1 -#define HAL_USBHUVC_MAX_MAILBOX_SZ 70 -#define HAL_USBHUVC_WORK_RAM_SIZE 20000 -#define HAL_USBHUVC_STATUS_PACKETS_COUNT 10 - - -/* HUB */ -#define HAL_USBH_USE_HUB 1 - -#define HAL_USBHHUB_MAX_INSTANCES 1 -#define HAL_USBHHUB_MAX_PORTS 6 - - -/* debug */ -#define USBH_DEBUG_ENABLE 1 -#define USBH_DEBUG_USBHD USBHD1 -#define USBH_DEBUG_SD SD2 -#define USBH_DEBUG_BUFFER 25000 - -#define USBH_DEBUG_ENABLE_TRACE 0 -#define USBH_DEBUG_ENABLE_INFO 1 -#define USBH_DEBUG_ENABLE_WARNINGS 1 -#define USBH_DEBUG_ENABLE_ERRORS 1 - -#define USBH_LLD_DEBUG_ENABLE_TRACE 0 -#define USBH_LLD_DEBUG_ENABLE_INFO 1 -#define USBH_LLD_DEBUG_ENABLE_WARNINGS 1 -#define USBH_LLD_DEBUG_ENABLE_ERRORS 1 - -#define USBHHUB_DEBUG_ENABLE_TRACE 0 -#define USBHHUB_DEBUG_ENABLE_INFO 1 -#define USBHHUB_DEBUG_ENABLE_WARNINGS 1 -#define USBHHUB_DEBUG_ENABLE_ERRORS 1 - -#define USBHMSD_DEBUG_ENABLE_TRACE 0 -#define USBHMSD_DEBUG_ENABLE_INFO 1 -#define USBHMSD_DEBUG_ENABLE_WARNINGS 1 -#define USBHMSD_DEBUG_ENABLE_ERRORS 1 - -#define USBHUVC_DEBUG_ENABLE_TRACE 0 -#define USBHUVC_DEBUG_ENABLE_INFO 1 -#define USBHUVC_DEBUG_ENABLE_WARNINGS 1 -#define USBHUVC_DEBUG_ENABLE_ERRORS 1 - -#define USBHFTDI_DEBUG_ENABLE_TRACE 0 -#define USBHFTDI_DEBUG_ENABLE_INFO 1 -#define USBHFTDI_DEBUG_ENABLE_WARNINGS 1 -#define USBHFTDI_DEBUG_ENABLE_ERRORS 1 - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/integer.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/integer.h deleted file mode 100644 index 074a46b..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/integer.h +++ /dev/null @@ -1,33 +0,0 @@ -/*-------------------------------------------*/ -/* Integer type definitions for FatFs module */ -/*-------------------------------------------*/ - -#ifndef _FF_INTEGER -#define _FF_INTEGER - -#ifdef _WIN32 /* FatFs development platform */ - -#include -#include - -#else /* Embedded platform */ - -/* This type MUST be 8 bit */ -typedef unsigned char BYTE; - -/* These types MUST be 16 bit */ -typedef short SHORT; -typedef unsigned short WORD; -typedef unsigned short WCHAR; - -/* These types MUST be 16 bit or 32 bit */ -typedef int INT; -typedef unsigned int UINT; - -/* These types MUST be 32 bit */ -typedef long LONG; -typedef unsigned long DWORD; - -#endif - -#endif diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/main.c deleted file mode 100644 index bfb318f..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/main.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ff.h" -#include "usbh.h" -#include - - - -#if HAL_USBH_USE_FTDI -#include "usbh/dev/ftdi.h" -#include "test.h" -#include "shell.h" -#include "chprintf.h" - -static THD_WORKING_AREA(waTestFTDI, 1024); - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) != Q_TIMEOUT) { - //flush - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&FTDIPD[0], buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&FTDIPD[0], - commands -}; - -static void ThreadTestFTDI(void *p) { - (void)p; - USBHFTDIPortDriver *const ftdipp = &FTDIPD[0]; - - shellInit(); - -start: - while (ftdipp->state != USBHFTDIP_STATE_ACTIVE) { - chThdSleepMilliseconds(100); - } - - usbDbgPuts("FTDI: Connected"); - - USBHFTDIPortConfig config = { - 115200, - USBHFTDI_FRAMING_DATABITS_8 | USBHFTDI_FRAMING_PARITY_NONE | USBHFTDI_FRAMING_STOP_BITS_1, - USBHFTDI_HANDSHAKE_NONE, - 0, - 0 - }; - - usbhftdipStart(ftdipp, &config); - - //loopback - if (0) { - for(;;) { - msg_t m = chSequentialStreamGet(ftdipp); - if (m < MSG_OK) { - usbDbgPuts("FTDI: Disconnected"); - goto start; - } - chSequentialStreamPut(ftdipp, (uint8_t)m); - if (m == 'q') - break; - } - } - - //shell test - if (1) { - thread_t *shelltp = NULL; - for(;;) { - if (ftdipp->state != USBHFTDIP_STATE_READY) - goto start; - if (!shelltp) { - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - } else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); - if (ftdipp->state != USBHFTDIP_STATE_READY) - goto start; - break; - } - chThdSleepMilliseconds(100); - } - } - - //FTDI uart RX to debug TX bridge - if (0) { - for(;;) { - msg_t m = chSequentialStreamGet(ftdipp); - if (m < MSG_OK) { - usbDbgPuts("FTDI: Disconnected"); - goto start; - } - sdPut(&USBH_DEBUG_SD, (uint8_t)m); - if (m == 'q') - break; - } - } - - //write speed test - if (1) { - usbhftdipStop(ftdipp); - config.speed = 3000000; - usbhftdipStart(ftdipp, &config); - - systime_t st, et; - int i; - for (i = 0; i < 5; i++) { - uint32_t bytes = config.speed / 10; - uint32_t times = bytes / 1024; - st = chVTGetSystemTimeX(); - while (times--) { - if (chSequentialStreamWrite(ftdipp, buf, 1024) < 1024) { - usbDbgPuts("FTDI: Disconnected"); - goto start; - } - bytes -= 1024; - } - if (bytes) { - if (chSequentialStreamWrite(ftdipp, buf, bytes) < bytes) { - usbDbgPuts("FTDI: Disconnected"); - goto start; - } - } - et = chVTGetSystemTimeX(); - usbDbgPrintf("\tRate=%uB/s", (config.speed * 100) / (et - st)); - } - } - - //single character write test (tests the timer) - if (0) { - for (;;) { - if (chSequentialStreamPut(ftdipp, 'A') != MSG_OK) { - usbDbgPuts("FTDI: Disconnected"); - goto start; - } - chThdSleepMilliseconds(100); - } - } - - usbhftdipStop(ftdipp); - - usbDbgPuts("FTDI: Tests done, restarting in 3s"); - chThdSleepMilliseconds(3000); - - goto start; -} -#endif - - - -#if HAL_USBH_USE_MSD -#include "usbh/dev/msd.h" -#include "ff.h" - -static FATFS MSDLUN0FS; -static uint8_t fbuff[10240]; -static FIL file; - -static FRESULT scan_files(BaseSequentialStream *chp, char *path) { - FRESULT res; - FILINFO fno; - DIR dir; - int i; - char *fn; - -#if _USE_LFN - fno.lfname = 0; - fno.lfsize = 0; -#endif - res = f_opendir(&dir, path); - if (res == FR_OK) { - i = strlen(path); - for (;;) { - res = f_readdir(&dir, &fno); - if (res != FR_OK || fno.fname[0] == 0) - break; - if (fno.fname[0] == '.') - continue; - fn = fno.fname; - if (fno.fattrib & AM_DIR) { - path[i++] = '/'; - strcpy(&path[i], fn); - res = scan_files(chp, path); - if (res != FR_OK) - break; - path[--i] = 0; - } else { - usbDbgPrintf("FS: %s/%s", path, fn); - } - } - } - return res; -} -static THD_WORKING_AREA(waTestMSD, 1024); -static void ThreadTestMSD(void *p) { - (void)p; - - FATFS *fsp; - uint32_t clusters; - FRESULT res; - BaseSequentialStream * const chp = (BaseSequentialStream *)&USBH_DEBUG_SD; - blkstate_t state; - systime_t st, et; - uint32_t j; - -start: - for(;;) { - chThdSleepMilliseconds(100); - - chSysLock(); - state = blkGetDriverState(&MSBLKD[0]); - chSysUnlock(); - if (state != BLK_READY) - continue; - - //raw read test - if (1) { -#define RAW_READ_SZ_MB 1 -#define NBLOCKS (sizeof(fbuff) / 512) -#define NITERATIONS ((RAW_READ_SZ_MB * 1024UL * 1024UL) / sizeof(fbuff)) - uint32_t start = 0; - chThdSetPriority(HIGHPRIO); - usbDbgPrintf("BLK: Raw read test (%dMB, %dB blocks)", RAW_READ_SZ_MB, sizeof(fbuff)); - st = chVTGetSystemTime(); - for (j = 0; j < NITERATIONS; j++) { - blkRead(&MSBLKD[0], start, fbuff, NBLOCKS); - start += NBLOCKS; - } - et = chVTGetSystemTime(); - usbDbgPrintf("BLK: Raw read in %d ms, %dkB/s", - et - st, - (RAW_READ_SZ_MB * 1024UL * 1000) / (et - st)); - chThdSetPriority(NORMALPRIO); - } - - usbDbgPuts("FS: Block driver ready, try mount..."); - - res = f_mount(&MSDLUN0FS, "0:", 1); - if (res != FR_OK) { - usbDbgPuts("FS: Can't mount. Check file system."); - continue; - } - usbDbgPuts("FS: Mounted."); - - res = f_getfree("0:", &clusters, &fsp); - if (res != FR_OK) { - usbDbgPuts("FS: f_getfree() failed"); - continue; - } - - usbDbgPrintf("FS: %lu free clusters, %lu sectors per cluster, %lu bytes free", - clusters, (uint32_t)MSDLUN0FS.csize, - clusters * (uint32_t)MSDLUN0FS.csize * MSBLKD[0].info.blk_size); - - break; - } - - //FATFS test - if (1) { - UINT bw; - const uint8_t *src; - const uint8_t *const start = (uint8_t *)0x08000000; - const uint8_t *const top = (uint8_t *)0x08020000; - - //write test - if (1) { - usbDbgPuts("FS: Write test (create file /test.dat, 1MB)"); - f_open(&file, "/test.dat", FA_CREATE_ALWAYS | FA_WRITE); - src = start; - st = chVTGetSystemTime(); - for (j = 0; j < 2048; j++) { - if (f_write(&file, src, 512, &bw) != FR_OK) - goto start; - src += bw; - if (src >= top) - src = start; - } - et = chVTGetSystemTime(); - usbDbgPrintf("FS: Written 1MB in %d ms, %dkB/s", - et - st, - (1024UL*1000) / (et - st)); - f_close(&file); - } - - //read test - if (1) { - usbDbgPuts("FS: Read test (read file /test.dat, 1MB, compare)"); - f_open(&file, "/test.dat", FA_READ); - src = start; - st = chVTGetSystemTime(); - for (j = 0; j < 2048; j++) { - if (f_read(&file, fbuff, 512, &bw) != FR_OK) - goto start; - if (memcmp(src, fbuff, bw)) { - usbDbgPrintf("Compare error @%08x", (uint32_t)src); - goto start; - } - src += bw; - if (src >= top) - src = start; - } - et = chVTGetSystemTime(); - usbDbgPrintf("FS: Read 1MB in %d ms, %dkB/s", - et - st, - (1024UL*1000) / (et - st)); - f_close(&file); - } - - //scan files test - if (1) { - usbDbgPuts("FS: Scan files test"); - fbuff[0] = 0; - scan_files(chp, (char *)fbuff); - } - } - - usbDbgPuts("FS: Tests done, restarting in 3s"); - chThdSleepMilliseconds(3000); - - goto start; - -} -#endif - - - - - - -int main(void) { - - halInit(); - usbhInit(); - chSysInit(); - - //PA2(TX) and PA3(RX) are routed to USART2 - sdStart(&SD2, NULL); - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - -#if STM32_USBH_USE_OTG1 - //VBUS - configured in board.h - //USB_FS - configured in board.h -#endif - -#if STM32_USBH_USE_OTG2 - //USB_HS - //TODO: Initialize Pads -#endif - -#if HAL_USBH_USE_MSD - usbhmsdObjectInit(&USBHMSD[0]); - usbhmsdLUNObjectInit(&MSBLKD[0]); - chThdCreateStatic(waTestMSD, sizeof(waTestMSD), NORMALPRIO, ThreadTestMSD, 0); -#endif -#if HAL_USBH_USE_FTDI - usbhftdiObjectInit(&USBHFTDID[0]); - usbhftdipObjectInit(&FTDIPD[0]); - chThdCreateStatic(waTestFTDI, sizeof(waTestFTDI), NORMALPRIO, ThreadTestFTDI, 0); -#endif - - //turn on USB power - palClearPad(GPIOC, GPIOC_OTG_FS_POWER_ON); - - //start -#if STM32_USBH_USE_OTG1 - usbhStart(&USBHD1); -#endif -#if STM32_USBH_USE_OTG2 - usbhStart(&USBHD2); -#endif - - for(;;) { -#if STM32_USBH_USE_OTG1 - usbhMainLoop(&USBHD1); -#endif -#if STM32_USBH_USE_OTG2 - usbhMainLoop(&USBHD2); -#endif - chThdSleepMilliseconds(100); - } -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h deleted file mode 100644 index c7671b7..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h deleted file mode 100644 index 56775af..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE - - -/* - * USBH driver system settings. - */ -#define STM32_OTG1_CHANNELS_NUMBER 8 -#define STM32_OTG2_CHANNELS_NUMBER 12 - -#define STM32_USBH_USE_OTG1 1 -#define STM32_OTG1_RXFIFO_SIZE 1024 -#define STM32_OTG1_PTXFIFO_SIZE 128 -#define STM32_OTG1_NPTXFIFO_SIZE 128 - -#define STM32_USBH_USE_OTG2 0 -#define STM32_OTG2_RXFIFO_SIZE 2048 -#define STM32_OTG2_PTXFIFO_SIZE 1024 -#define STM32_OTG2_NPTXFIFO_SIZE 1024 - -#define STM32_USBH_MIN_QSPACE 4 -#define STM32_USBH_CHANNELS_NP 4 - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/readme.txt deleted file mode 100644 index 793da2e..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/USB_HOST/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 STM32F407. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F4-Discovery board. - -** The Demo ** - - -** Build Procedure ** - -The demo has been tested by using the free Codesourcery GCC-based toolchain -and YAGARTO. just modify the TRGT line in the makefile in order to use -different GCC toolchains. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.cproject deleted file mode 100644 index f6e2450..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.project deleted file mode 100644 index 30d6ff3..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/.project +++ /dev/null @@ -1,91 +0,0 @@ - - - STM32F4xx-onewire - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - PARENT-4-PROJECT_LOC/os - - - os-git - 2 - PARENT-5-PROJECT_LOC/ChibiOS-RT/os - - - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/Makefile deleted file mode 100644 index 02ab018..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/Makefile +++ /dev/null @@ -1,219 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c \ - onewire_test.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/chconf.h deleted file mode 100644 index 1065821..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf.h deleted file mode 100644 index 64811a5..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h deleted file mode 100644 index 91dbfbc..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/halconf_community.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE TRUE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/main.c deleted file mode 100644 index 793bffe..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/main.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "onewire_test.h" - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Executes infinite onewire test code. - */ - onewireTest(); - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h deleted file mode 100644 index 2111433..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h deleted file mode 100644 index 7ca6e71..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC NAND driver system settings. - */ -#define STM32_NAND_USE_FSMC_NAND1 FALSE -#define STM32_NAND_USE_FSMC_NAND2 FALSE -#define STM32_NAND_USE_EXT_INT FALSE -#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_NAND_DMA_PRIORITY 0 -#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c deleted file mode 100644 index be20dbc..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F4xx/onewire/onewire_test.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "hal.h" - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -#if defined(BOARD_ST_STM32F4_DISCOVERY) || \ - defined(BOARD_ST_STM32F0_DISCOVERY) || \ - defined(BOARD_ST_STM32F0308_DISCOVERY) - #if ONEWIRE_USE_STRONG_PULLUP - #error "This board has not enough voltage for this feature" - #endif -#endif - -#if defined(BOARD_ST_STM32F0308_DISCOVERY) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_PIN0 - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_off() (palClearPad(GPIOC, GPIOC_LED4)) - #define search_led_on() (palSetPad(GPIOC, GPIOC_LED4)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#elif defined(BOARD_ST_STM32F4_DISCOVERY) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_PIN0 - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(2) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_off() (palClearPad(GPIOD, GPIOD_LED4)) - #define search_led_on() (palSetPad(GPIOD, GPIOD_LED4)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#elif defined(BOARD_OLIMEX_STM32_103STK) - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN 0 - #define ONEWIRE_PAD_MODE_IDLE PAL_MODE_INPUT - #define ONEWIRE_PAD_MODE_ACTIVE PAL_MODE_STM32_ALTERNATE_OPENDRAIN - #define search_led_on() (palClearPad(GPIOC, GPIOC_LED)) - #define search_led_off() (palSetPad(GPIOC, GPIOC_LED)) - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#else - #define ONEWIRE_PORT GPIOB - #define ONEWIRE_PIN GPIOB_TACHOMETER - #include "pads.h" - #define ONEWIRE_PAD_MODE_ACTIVE (PAL_MODE_ALTERNATE(2) | PAL_STM32_OTYPE_OPENDRAIN) - #define search_led_on red_led_on - #define search_led_off red_led_off - #define ONEWIRE_MASTER_CHANNEL 2 - #define ONEWIRE_SAMPLE_CHANNEL 3 -#endif - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ -/* - * Forward declarations - */ -#if ONEWIRE_USE_STRONG_PULLUP -static void strong_pullup_assert(void); -static void strong_pullup_release(void); -#endif - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static uint8_t testbuf[12]; - -/* stores 3 temperature values in millicelsius */ -static int32_t temperature[3]; - -/* - * Config for underlied PWM driver. - * Note! It is NOT constant because 1-wire driver needs to change them - * during functioning. - */ -static PWMConfig pwm_cfg = { - 0, - 0, - NULL, - { - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -#if STM32_PWM_USE_ADVANCED - 0, -#endif - 0 -}; - -/* - * - */ -static const onewireConfig ow_cfg = { - &PWMD3, - &pwm_cfg, - PWM_OUTPUT_ACTIVE_LOW, - ONEWIRE_MASTER_CHANNEL, - ONEWIRE_SAMPLE_CHANNEL, - ONEWIRE_PORT, - ONEWIRE_PIN, -#if defined(STM32F1XX) - ONEWIRE_PAD_MODE_IDLE, -#endif - ONEWIRE_PAD_MODE_ACTIVE, -#if ONEWIRE_USE_STRONG_PULLUP - strong_pullup_assert, - strong_pullup_release -#endif -}; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -#if ONEWIRE_USE_STRONG_PULLUP -/** - * - */ -static void strong_pullup_assert(void) { - palSetPadMode(ONEWIRE_PORT, ONEWIRE_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL); -} - -/** - * - */ -static void strong_pullup_release(void) { - palSetPadMode(ONEWIRE_PORT, ONEWIRE_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); -} -#endif /* ONEWIRE_USE_STRONG_PULLUP */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void onewireTest(void) { - - int16_t tmp; - uint8_t rombuf[24]; - size_t devices_on_bus = 0; - size_t i = 0; - bool presence; - - onewireObjectInit(&OWD1); - onewireStart(&OWD1, &ow_cfg); - -#if ONEWIRE_SYNTH_SEARCH_TEST - synthSearchRomTest(&OWD1); -#endif - - for (i=0; i<3; i++) - temperature[i] = -666; - - while (true) { - if (true == onewireReset(&OWD1)){ - - memset(rombuf, 0x55, sizeof(rombuf)); - search_led_on(); - devices_on_bus = onewireSearchRom(&OWD1, rombuf, 3); - search_led_off(); - osalDbgCheck(devices_on_bus <= 3); - osalDbgCheck(devices_on_bus > 0); - - if (1 == devices_on_bus){ - /* test read rom command */ - presence = onewireReset(&OWD1); - osalDbgCheck(true == presence); - testbuf[0] = ONEWIRE_CMD_READ_ROM; - onewireWrite(&OWD1, testbuf, 1, 0); - onewireRead(&OWD1, testbuf, 8); - osalDbgCheck(testbuf[7] == onewireCRC(testbuf, 7)); - osalDbgCheck(0 == memcmp(rombuf, testbuf, 8)); - } - - /* start temperature measurement on all connected devices at once */ - presence = onewireReset(&OWD1); - osalDbgCheck(true == presence); - testbuf[0] = ONEWIRE_CMD_SKIP_ROM; - testbuf[1] = ONEWIRE_CMD_CONVERT_TEMP; - -#if ONEWIRE_USE_STRONG_PULLUP - onewireWrite(&OWD1, testbuf, 2, MS2ST(750)); -#else - onewireWrite(&OWD1, testbuf, 2, 0); - /* poll bus waiting ready signal from all connected devices */ - testbuf[0] = 0; - while (testbuf[0] == 0){ - osalThreadSleepMilliseconds(50); - onewireRead(&OWD1, testbuf, 1); - } -#endif - - for (i=0; i - -/* - ****************************************************************************** - * DEFINES - ****************************************************************************** - */ - -/* do not set it more than 64 because of some fill_pattern functions - * will be broken.*/ -#define SYNTH_DEVICES_MAX 64 - -/* - * synthetic device - */ -typedef struct { - bool active; - uint64_t id; -} OWSynthDevice; - -/* - * synthetic bus - */ -typedef struct { - OWSynthDevice devices[SYNTH_DEVICES_MAX]; - size_t dev_present; - bool complement_bit; - ioline_t rom_bit; -} OWSynthBus; - -/* - ****************************************************************************** - * EXTERNS - ****************************************************************************** - */ - -/* - ****************************************************************************** - * PROTOTYPES - ****************************************************************************** - */ - -/* - ****************************************************************************** - * GLOBAL VARIABLES - ****************************************************************************** - */ - -static OWSynthBus synth_bus; - -/* - * local buffer for discovered ROMs - */ -static uint64_t detected_devices[SYNTH_DEVICES_MAX]; - -/* - ****************************************************************************** - ****************************************************************************** - * LOCAL FUNCTIONS - ****************************************************************************** - ****************************************************************************** - */ - -/* - ****************************************************************************** - * EXPORTED FUNCTIONS - ****************************************************************************** - */ - -/** - * - */ -void _synth_ow_write_bit(onewireDriver *owp, ioline_t bit) { - (void)owp; - size_t i; - - for (i=0; i> synth_bus.rom_bit) & 1U) != bit) { - synth_bus.devices[i].active = false; - } - } - synth_bus.rom_bit++; -} - -/** - * - */ -ioline_t _synth_ow_read_bit(void) { - ioline_t ret = 0xFF; - size_t i; - ioline_t bit; - - for (i=0; i> synth_bus.rom_bit) & 1U; - if (synth_bus.complement_bit){ - bit ^= 1U; - } - if (0xFF == ret) - ret = bit; - else - ret &= bit; - } - } - synth_bus.complement_bit = !synth_bus.complement_bit; - return ret; -} - -/** - * - */ -static void synth_reset_pulse(void){ - size_t i; - - for (i=0; isearch_rom); - - do { - /* initialize buffer to store result */ - if (owp->search_rom.reg.devices_found >= max_rom_cnt) - owp->search_rom.retbuf = result + 8*(max_rom_cnt-1); - else - owp->search_rom.retbuf = result + 8*owp->search_rom.reg.devices_found; - memset(owp->search_rom.retbuf, 0, 8); - - /* clean iteration state */ - search_clean_iteration(&owp->search_rom); - - /**/ - synth_reset_pulse(); - synth_bus.rom_bit = 0; - synth_bus.complement_bit = false; - for (i=0; i<64*3 - 1; i++){ - ow_search_rom_cb(NULL, owp); - } - - if (ONEWIRE_SEARCH_ROM_ERROR != owp->search_rom.reg.result) { - /* store cached result for usage in next iteration */ - memcpy(owp->search_rom.prev_path, owp->search_rom.retbuf, 8); - } - } - while (ONEWIRE_SEARCH_ROM_SUCCESS == owp->search_rom.reg.result); - - /**/ - if (ONEWIRE_SEARCH_ROM_ERROR == owp->search_rom.reg.result) - return 0; - else - return owp->search_rom.reg.devices_found; -} - -/** - * - */ -static void fill_pattern_real_devices(void) { - size_t i; - - for (i=0; i> i); - } -} - -/** - * @brief random pattern helper - */ -static bool is_id_uniq(const OWSynthDevice *dev, size_t n, uint64_t id) { - size_t i; - - for (i=0; i - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/.project b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/.project deleted file mode 100644 index 79bd112..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/.project +++ /dev/null @@ -1,106 +0,0 @@ - - - TM4C123x-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - community_os - 2 - CHIBIOS3/community/os - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/Makefile b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/Makefile deleted file mode 100644 index f587083..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/chconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/chconf.h deleted file mode 100644 index dd6722a..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index d963642..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/halconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/halconf.h deleted file mode 100644 index 6e763ee..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/main.c b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/main.c deleted file mode 100644 index 4370794..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/main.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void extcb1(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - palTogglePad(GPIOF, GPIOF_LED_RED); -} - -static void extcb2(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - palTogglePad(GPIOF, GPIOF_LED_GREEN); -} - -static const EXTConfig extcfg = -{ - { - /* GPIOA */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOB */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOC */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOD */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOE */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOF */ - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, extcb2}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPadMode(GPIOF, GPIOF_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOF, GPIOF_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOF, GPIOF_SW1, PAL_MODE_INPUT_PULLUP); - palSetPadMode(GPIOF, GPIOF_SW2, PAL_MODE_INPUT_PULLUP); - - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h deleted file mode 100644 index 74a4da3..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/EXT/mcuconf.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * SPI driver system settings. - */ -#define TIVA_SPI_USE_SSI0 TRUE -#define TIVA_SPI_USE_SSI1 FALSE -#define TIVA_SPI_USE_SSI2 FALSE -#define TIVA_SPI_USE_SSI3 FALSE -#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 -#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 -#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 -#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 -#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 -#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 -#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 -#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 -#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.cproject b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.cproject deleted file mode 100644 index 93c394e..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.project b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.project deleted file mode 100644 index ae2b92b..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/.project +++ /dev/null @@ -1,106 +0,0 @@ - - - TM4C123x-GPT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - community_os - 2 - CHIBIOS3/community/os - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/Makefile b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/Makefile deleted file mode 100644 index f587083..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/chconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/TM4C123x-GPT (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/TM4C123x-GPT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 4c35b02..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/debug/TM4C123x-GPT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/halconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/halconf.h deleted file mode 100644 index 4d1738c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/main.c b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/main.c deleted file mode 100644 index 4e19b14..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/main.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * GPT1 callback - */ -static void gpt1cb(GPTDriver *gptp) -{ - (void)gptp; - palClearPad(GPIOF, GPIOF_LED_RED); -} - -/* - * GPT7 callback - */ -static void gpt7cb(GPTDriver *gptp) -{ - (void)gptp; - palSetPad(GPIOF, GPIOF_LED_RED); - chSysLockFromISR(); - gptStartOneShotI(&GPTD1, 31250); /* 0.1 second pulse.*/ - chSysUnlockFromISR(); -} - -/* - * GPT1 configuration. - */ -static const GPTConfig gpt1cfg = -{ - 312500, /* 312500 kHz timer clock.*/ - gpt1cb, /* Timer callback.*/ -}; - -/* - * GPT7 configuration. - */ -static const GPTConfig gpt7cfg = -{ - 10000, /* 10000 kHz timer clock.*/ - gpt7cb, /* Timer callback.*/ -}; - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPadMode(GPIOF, GPIOF_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); - - /* - * Start the gpt drivers with the custom configurations. - */ - gptStart(&GPTD1, &gpt1cfg); - gptStart(&GPTD7, &gpt7cfg); - - /* - * Normal main() thread activity - */ - while (TRUE) { - gptStartContinuous(&GPTD7, 5000); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD7); - gptStartContinuous(&GPTD7, 2500); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD7); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h deleted file mode 100644 index b193fa9..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/GPT/mcuconf.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 TRUE -#define TIVA_GPT_USE_GPT1 TRUE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 TRUE -#define TIVA_GPT_USE_WGPT1 TRUE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.cproject b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.cproject deleted file mode 100644 index 31b2a7f..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.project b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.project deleted file mode 100644 index fcc4cb1..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/.project +++ /dev/null @@ -1,101 +0,0 @@ - - - TM4C123x-I2C - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/Makefile b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/Makefile deleted file mode 100644 index 32abbee..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/Makefile +++ /dev/null @@ -1,214 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/os/hal/lib/streams/streams.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/chconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/TM4C123x-I2C (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/TM4C123x-I2C (OpenOCD, Flash and Run).launch deleted file mode 100644 index 0a80573..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/debug/TM4C123x-I2C (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/halconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/halconf.h deleted file mode 100644 index 5c926e9..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/main.c b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/main.c deleted file mode 100644 index 5f58176..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/main.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "chprintf.h" - -/* buffers depth */ -#define TEMP_RX_DEPTH 6 -#define TEMP_TX_DEPTH 6 - -/* tmp275 specific addresses */ -#define TMP275_TEMP 0x00 -#define TMP275_CONF 0x01 -#define TMP275_TLOW 0x02 -#define TMP275_THIGH 0x03 - -/* tmp275 config register */ -#define TMP275_CONF_SD 0x01 -#define TMP275_CONF_TM 0x02 -#define TMP275_CONF_POL 0x04 -#define TMP275_CONF_F0 0x08 -#define TMP275_CONF_F1 0x10 -#define TMP275_CONF_R0 0x20 -#define TMP275_CONF_R1 0x40 -#define TMP275_CONF_OS 0x80 - -#define TMP275_ADDR 0b01001001 - -static uint8_t rxbuf[TEMP_RX_DEPTH]; -static uint8_t txbuf[TEMP_TX_DEPTH]; -static i2cflags_t errors = 0; -static uint16_t temperature; - -/* I2C configuration*/ -static const I2CConfig i2cfg = -{ - 400000 -}; - -/* - * Application entry point. - */ -int main(void) -{ - msg_t status = MSG_OK; - systime_t tmo = MS2ST(100); - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* Configure RX and TX pins for UART0.*/ - palSetPadMode(GPIOA, GPIOA_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - palSetPadMode(GPIOA, GPIOA_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - - /* - * Start the serial driver with the default configuration. - */ - sdStart(&SD1, NULL); - - /* Configure SCK and SCL pins for I2C0.*/ - palSetPadMode(GPIOB, GPIOB_I2C0_SCL, PAL_MODE_OUTPUT_PUSHPULL | PAL_MODE_ALTERNATE(3)); - palSetPadMode(GPIOB, GPIOB_I2C0_SDA, PAL_MODE_OUTPUT_OPENDRAIN | PAL_MODE_ALTERNATE(3)); - - /* - * Start the i2c driver with the custom configuration. - */ - i2cStart(&I2CD1, &i2cfg); - - chprintf((BaseSequentialStream *)&SD1, "\r\n**********************\r\n"); - chprintf((BaseSequentialStream *)&SD1, "* TM4C123x I2C Demo. *\r\n"); - chprintf((BaseSequentialStream *)&SD1, "**********************\r\n\r\n"); - - txbuf[0] = TMP275_CONF; // register address - txbuf[1] = TMP275_CONF_R0 | TMP275_CONF_R1; // set conversion resolution to 12 bits - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, TMP275_ADDR, txbuf, 2, rxbuf, 0, tmo); - i2cReleaseBus(&I2CD1); - - if (status != MSG_OK){ - errors = i2cGetErrors(&I2CD1); - chprintf((BaseSequentialStream *)&SD1, "ERROR: errors detected.\r\n"); - } - - /* - * Normal main() thread activity - */ - while (TRUE) { - txbuf[0] = TMP275_TEMP; // register address - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, TMP275_ADDR, txbuf, 1, rxbuf, 2, tmo); - i2cReleaseBus(&I2CD1); - - if (status != MSG_OK){ - errors = i2cGetErrors(&I2CD1); - chprintf((BaseSequentialStream *)&SD1, "Status: %i\r\n", status); - } - else{ - temperature = (((rxbuf[0] << 8) | rxbuf[1]) >> 4); - chprintf((BaseSequentialStream *)&SD1, "Temperature: %u,%4u\r\n", temperature >> 4, 625*(temperature & 0x0f)); - } - - chThdSleepMilliseconds(1000); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h deleted file mode 100644 index 81555ed..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/I2C/mcuconf.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 TRUE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.cproject b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.cproject deleted file mode 100644 index b1141bf..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.project b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.project deleted file mode 100644 index 30f93a6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/.project +++ /dev/null @@ -1,106 +0,0 @@ - - - TM4C123x-PWM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - community_os - 2 - CHIBIOS3/community/os - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/Makefile deleted file mode 100644 index f587083..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/TM4C123x-PWM (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/TM4C123x-PWM (OpenOCD, Flash and Run).launch deleted file mode 100644 index 6ab8ff4..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/debug/TM4C123x-PWM (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/halconf.h deleted file mode 100644 index 433d5d0..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/main.c b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/main.c deleted file mode 100644 index 4772e6c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/main.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) -{ - (void)pwmp; - palClearPad(GPIOF, GPIOF_LED_RED); - palClearPad(GPIOF, GPIOF_LED_GREEN); - palClearPad(GPIOF, GPIOF_LED_BLUE); -} - -static void pwmc1cb0(PWMDriver *pwmp) -{ - (void)pwmp; - palSetPad(GPIOF, GPIOF_LED_RED); -} - -static void pwmc1cb1(PWMDriver *pwmp) -{ - (void)pwmp; - palSetPad(GPIOF, GPIOF_LED_GREEN); -} - -static void pwmc1cb2(PWMDriver *pwmp) -{ - (void)pwmp; - palSetPad(GPIOF, GPIOF_LED_BLUE); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency.*/ - 10000, /* Initial PWM period 1S.*/ - pwmpcb, - { - {PWM_OUTPUT_DISABLED, pwmc1cb0}, - {PWM_OUTPUT_DISABLED, pwmc1cb1}, - {PWM_OUTPUT_DISABLED, pwmc1cb2}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPadMode(GPIOF, GPIOF_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOF, GPIOF_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOF, GPIOF_LED_BLUE, PAL_MODE_OUTPUT_PUSHPULL); - - /* - * Start PWM driver - */ - pwmStart(&PWMD1, &pwmcfg); - - pwmEnableChannel(&PWMD1, 0, 0); - pwmEnableChannel(&PWMD1, 1, 0); - pwmEnableChannel(&PWMD1, 2, 0); - pwmEnableChannelNotification(&PWMD1, 0); - pwmEnableChannelNotification(&PWMD1, 1); - pwmEnableChannelNotification(&PWMD1, 2); - pwmEnablePeriodicNotification(&PWMD1); - - /* - * Normal main() thread activity - */ - while (TRUE) { - uint16_t rgbColour[3]; - uint8_t decColour; - uint16_t i; - - // Start off with red. - rgbColour[0] = pwmcfg.frequency - 2; - rgbColour[1] = 0; - rgbColour[2] = 0; - - // Choose the colours to increment and decrement. - for (decColour = 0; decColour < 3; decColour++) { - int incColour = decColour == 2 ? 0 : decColour + 1; - - // cross-fade the two colours. - for(i = 0; i < pwmcfg.frequency - 2; i++) { - rgbColour[decColour] -= 1; - rgbColour[incColour] += 1; - - pwmEnableChannel(&PWMD1, 0, rgbColour[0]); - pwmEnableChannel(&PWMD1, 1, rgbColour[1]); - pwmEnableChannel(&PWMD1, 2, rgbColour[2]); - - chThdSleepMilliseconds(1); - } - } - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h deleted file mode 100644 index 9584bf8..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/PWM/mcuconf.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 TRUE -#define TIVA_PWM_USE_PWM1 TRUE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.cproject b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.cproject deleted file mode 100644 index 483936f..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.project b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.project deleted file mode 100644 index 150ab22..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/.project +++ /dev/null @@ -1,106 +0,0 @@ - - - TM4C123x-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - community_os - 2 - CHIBIOS3/community/os - - - os - 2 - CHIBIOS3/os - - - test - 2 - CHIBIOS3/test - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/Makefile b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/Makefile deleted file mode 100644 index f587083..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/chconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/TM4C123x-SPI (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/TM4C123x-SPI (OpenOCD, Flash and Run).launch deleted file mode 100644 index fe40b6e..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/debug/TM4C123x-SPI (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/halconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/halconf.h deleted file mode 100644 index a8aaed6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/main.c b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/main.c deleted file mode 100644 index f04cdbf..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * High speed SPI configuration (5MHZ, CPHA=0, CPOL=0). - */ -static const SPIConfig hs_spicfg = -{ - NULL, - GPIOA, - 3, - TIVA_CR0_DSS(8) | /*TIVA_CR0_SPH | TIVA_CR_SPO |*/ TIVA_CR0_SRC(0), - 16 -}; - -/* - * Low speed SPI configuration (1MHz, CPHA=0, CPOL=0). - */ -static const SPIConfig ls_spicfg = -{ - NULL, - GPIOA, - 3, - TIVA_CR0_DSS(8) | /*TIVA_CR0_SPH | TIVA_CR_SPO |*/ TIVA_CR0_SRC(0), - 80 -}; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static THD_FUNCTION(spi_thread_1, p) -{ - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(GPIOF, GPIOF_LED_GREEN); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static THD_FUNCTION(spi_thread_2, p) -{ - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(GPIOF, GPIOF_LED_GREEN);/* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } -} - -/* - * Application entry point. - */ -int main(void) -{ - size_t i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPadMode(GPIOA, GPIOA_SSI0_CLK, PAL_MODE_OUTPUT_PUSHPULL | - PAL_MODE_ALTERNATE(2)); - palSetPadMode(GPIOA, GPIOA_SSI0_RX, PAL_MODE_OUTPUT_PUSHPULL | - PAL_MODE_ALTERNATE(2)); - palSetPadMode(GPIOA, GPIOA_SSI0_TX, PAL_MODE_OUTPUT_PUSHPULL | - PAL_MODE_ALTERNATE(2)); - palSetPadMode(GPIOA, GPIOA_PIN3, PAL_MODE_OUTPUT_PUSHPULL); - - palSetPadMode(GPIOF, GPIOF_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) { - txbuf[i] = (uint8_t)i; - } - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h deleted file mode 100644 index 74a4da3..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/SPI/mcuconf.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * SPI driver system settings. - */ -#define TIVA_SPI_USE_SSI0 TRUE -#define TIVA_SPI_USE_SSI1 FALSE -#define TIVA_SPI_USE_SSI2 FALSE -#define TIVA_SPI_USE_SSI3 FALSE -#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 -#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 -#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 -#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 -#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 -#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 -#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 -#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 -#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.cproject b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.cproject deleted file mode 100644 index f9404f1..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.project b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.project deleted file mode 100644 index 1c2bc3f..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/.project +++ /dev/null @@ -1,101 +0,0 @@ - - - TM4C123x-WDG - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD - - - community_os - 2 - PARENT-1-CHIBIOS/ChibiOS-Contrib/os - - - os - 2 - CHIBIOS/os - - - - - CHIBIOS3 - file:/C:/ChibiStudio/chibios3 - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/Makefile b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/Makefile deleted file mode 100644 index 5ae01c9..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/chconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/TM4C123x-WDG (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/TM4C123x-WDG (OpenOCD, Flash and Run).launch deleted file mode 100644 index 1400d51..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/debug/TM4C123x-WDG (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/halconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/halconf.h deleted file mode 100644 index 2da5421..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/halconf.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/main.c b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/main.c deleted file mode 100644 index da08cfb..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/main.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static bool watchdog_timeout(WDGDriver *wdgp) -{ - (void)wdgp; - - palSetPad(GPIOF, GPIOF_LED_RED); - - /* Return true to prevent a reset on the next timeout.*/ - return true; -} - -/* - * Watchdog deadline set to one second. - * Use callback on first timeout. - * Stall timer if paused by debugger. - */ -static const WDGConfig wdgcfg = -{ - TIVA_SYSCLK, - watchdog_timeout, - TEST_STALL -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetPadMode(GPIOF, GPIOF_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOF, GPIOF_LED_BLUE, PAL_MODE_OUTPUT_PUSHPULL); - - palSetPadMode(GPIOF, GPIOF_SW1, PAL_MODE_INPUT_PULLUP); - palSetPadMode(GPIOF, GPIOF_SW2, PAL_MODE_INPUT_PULLUP); - - /* - * Starting the watchdog driver. - */ - wdgStart(&WDGD1, &wdgcfg); - - /* - * Normal main() thread activity, it resets the watchdog. - */ - while (true) { - if (palReadPad(GPIOF, GPIOF_SW1)) { - /* Only reset the watchdog if the button is not pressed */ - wdgReset(&WDGD1); - palClearPad(GPIOF, GPIOF_LED_RED); - } - - palTogglePad(GPIOF, GPIOF_LED_BLUE); - - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/mcuconf.h b/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/mcuconf.h deleted file mode 100644 index 4136b0a..0000000 --- a/ChibiOS_16.1.5/community/testhal/TIVA/TM4C123x/WDG/mcuconf.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -#define TM4C123_USE_REVISION_6_FIX -#define TM4C123_USE_REVISION_7_FIX - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 FALSE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * SPI driver system settings. - */ -#define TIVA_SPI_USE_SSI0 TRUE -#define TIVA_SPI_USE_SSI1 FALSE -#define TIVA_SPI_USE_SSI2 FALSE -#define TIVA_SPI_USE_SSI3 FALSE -#define TIVA_SPI_SSI0_RX_UDMA_CHANNEL 10 -#define TIVA_SPI_SSI1_RX_UDMA_CHANNEL 24 -#define TIVA_SPI_SSI2_RX_UDMA_CHANNEL 12 -#define TIVA_SPI_SSI3_RX_UDMA_CHANNEL 14 -#define TIVA_SPI_SSI0_TX_UDMA_CHANNEL 11 -#define TIVA_SPI_SSI1_TX_UDMA_CHANNEL 25 -#define TIVA_SPI_SSI2_TX_UDMA_CHANNEL 13 -#define TIVA_SPI_SSI3_TX_UDMA_CHANNEL 15 -#define TIVA_SPI_SSI0_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_RX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_RX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI0_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI1_TX_UDMA_MAPPING 0 -#define TIVA_SPI_SSI2_TX_UDMA_MAPPING 2 -#define TIVA_SPI_SSI3_TX_UDMA_MAPPING 2 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A - -#define TIVA_WDG_USE_WDT0 TRUE -#define TIVA_WDG_USE_WDT1 FALSE -- cgit v1.2.3