From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt | 22 ---------------------- 1 file changed, 22 deletions(-) delete mode 100644 ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt (limited to 'ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt') diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt deleted file mode 100644 index 2a1524d..0000000 --- a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt +++ /dev/null @@ -1,22 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for Atmel AVR ATmega1280. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Arduino Mega board. - -** The Demo ** - -The demo currently just prints the TestThread output on Serial0, which is -available on the board USB connector (FT232 converter), and toggles the LED -on PB7 (pin 13 on Arduino IDE) every second. - -** Build Procedure ** - -The demo was built using the GCC AVR toolchain. It should build with WinAVR too! - -** Notes ** - -This demo runs natively so the Arduino bootloader must be removed and the FUSEs -reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99. -- cgit v1.2.3