From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject | 57 --- ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project | 43 -- ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile | 188 -------- .../demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx | 273 ----------- ...56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg | 290 ------------ ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h | 499 --------------------- .../demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf | 153 ------- .../demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp | Bin 62713 -> 0 bytes ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h | 388 ---------------- ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c | 202 --------- ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h | 293 ------------ 11 files changed, 2386 deletions(-) delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c delete mode 100644 ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h (limited to 'ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB') diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject deleted file mode 100644 index dfc5a6a..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject +++ /dev/null @@ -1,57 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project deleted file mode 100644 index 4eee5e2..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - RT-SPC56EC-EVB - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_EVB_SPC56EC - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile deleted file mode 100644 index bacf31a..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile +++ /dev/null @@ -1,188 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the optional exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc56ecxx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC56EC/board.mk -include $(CHIBIOS)/os/hal/ports/SPC5/SPC56ECxx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/SPC56EC74.ld - -# C sources here. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ - $(CHIBIOS)/os/hal/lib/streams/chprintf.c \ - $(CHIBIOS)/os/various/shell.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -MOT = $(CP) -O srec -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -DSPC56ECXX_FMPLL_CLOCK_ERRATA_WORKAROUND=0 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx deleted file mode 100644 index df26ace..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx +++ /dev/null @@ -1,273 +0,0 @@ - - - debug.wsx000vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==4.028.08.2013 14:58:49:999000000WorkspaceManagerWorkspaceManager01Core01Target0.Controller0.Core0Target0.Controller0.Core010Core11Target0.Controller0.Core1Target0.Controller0.Core11033007632112968181280780NormalfalseTop1272falseBottom0000falsefalse00DockPaneltrue457falseLeft0000falsefalse00DockPanelfalse457falseLeft0000falsefalse10DockPanelfalse0falseTop0000falsefalse2-1TabbedDocumentfalse457falseLeft0000falsefalse30DockPaneltrue457falseLeft0000falsefalse20DockPanelfalse457falseLeft0000falsefalse40DockPanelfalse0falseTop0000falsefalse1-1TabbedDocumentfalse0falseTop0000falsefalse0-1TabbedDocumenttruetrue632false200false200true200true100truetrue0012807400128024Platform Main Menufalsetrue32427625Macro ToolbarfalsetrueUDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueRun MacroImagetrueUDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueDebug MacroImagetrueUDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueBreak MacroImagetrueUDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueReload MacroImagetrueUDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspacetrueImageAndTextfalse2792414125Config ToolbarfalsetrueUDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueTarget ConfigurationImagetrueUDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueConnect TargetImagetrueUDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueDisconnect TargetImagetrueUDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}trueSetup Target InterfaceImagetrueUDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueMCU Run ControlImagetrue4202425925Tools ToolbarfalsetrueUDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core0trueImageAndTextfalseUDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueExecution Time SetupImagetrueUDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core1trueImageAndTextfalse679249525Edit ToolbarfalsetrueUDE_Workspace_0x1779trueCutImagetrueUDE_Workspace_0x177AtrueCopyImagetrueUDE_Workspace_0x177BtruePasteImagetrue774244925File ToolbarfalsetrueUDE_Workspace_0x1770trueNew WorkspaceImagetrueUDE_Workspace_0x1771falseOpen workspaceImagetrueUDE_Workspace_0x1772falseSave workspace asImagetrueUDE_Workspace_0x1773falseSave workspaceImagetrueUDE_Workspace_0x1774falseClose workspaceImagetrueUDE_Workspace_0x177FfalseExport view contentImagetrueUDE_Workspace_0x1778falsePrintImagetrueUDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}falseLoad ProgramImagetrue8232444025Views ToolbarfalsetrueUDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueTarget BrowserImagetrueUDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueDiagnostic Message ViewerImagetrueUDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueConsoleImagetrueUDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}trueCPU WindowImagetrueUDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueExplore SymbolsImagetrueUDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueProgramImagetrueUDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueSingle Program WindowImagetrueUDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueDisassembly WindowImagetrueUDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueShow Special Function RegisterImagetrueUDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueLocalsImagetrueUDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueWatchImagetrueUDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueSimulated I/OImagetrueUDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueUDE HTMLImagetrueUDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueArray ChartImagetrueUDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueTime Traced Signal ChartImagetrueUDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueIP Trace ProfilingImagetrueUDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueMemoryImagetrueUDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueCall StackImagetrue34949225Debug ToolbarfalsetrueUDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueShow IPImagetrueUDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueShow program codeImagetrueUDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStart ProgramImagetrueUDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStep OverImagetrueUDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStep IntoImagetrueUDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStep OutImagetrueUDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueRun CursorImagetrueUDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueBreak ProgramImagetrueUDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueResetImagetrueUDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueRestart ProgramImagetrueUDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueBreakpointsImagetrueUDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueToggle BreakImagetrueUDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core0trueImageAndTextfalseUDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}falseTrigger setupImagetrueUDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core1falseImageAndTextfalse01002625Show Toolbarfalsefalse02002625Window Toolbarfalsefalse02252625Workspace Toolbarfalsefalse02752625Help Toolbarfalsefalse075712802300128023Platform Status Barfalsetrue0740683128074068328.08.2013 15:00:07:1451007782411WorkspaceManager11028.08.2013 15:00:07:129MgAAAA==AQAAAA==ZAAAAA==AQAAAA==lgAAAA==AQAAAA==6AMAAA==AQAAAA==9011201WorkspaceManager11000\\napnt002.nap.st.com\NAPPRT0001..\..\..\..\..\..\Program Files (x86)\pls\UDE 4.0\StdLibrary.mso416,1097,367,613620,965,340,66200{866f82d3-fac5-43cd-8a82-0af01e46e2c5}..\..\..\..\..\..\Users\disiriog\Documents\pls\UDE 4.0The script contains a collection of macros to save memory content into different file formats -and fill target memory rangesV:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm' -' $Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3 30.04.04 9:34 Weisses $ -'_______________________________________________________ -' -' universal debug engine -' -' Standard command line macros - part 1 -' -' pls Development Tools 1999-2004 -' -' 28.04.04 SW correction for UDE 1.10 -' 03.06.03 SW initial version -'_______________________________________________________ - -'_______________________________________________________ -' -' UnAss command line function -' -' generates disassembly file -' -' command line UnAss output-file range1 [range2] [range3] ..... -' range description: -' C:<startaddress>,<length> or - code -' DB:<startaddress>,<length> or - data byte -' DW:<startaddress>,<length> or - data word -' DD:<startaddress>,<length> or - data dword -'_______________________________________________________ - -Sub UnAss(File,ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - If IsNumeric(File) Then - MsgBox "File parameter wrong - " & File - Exit Sub - End If - DisASMObj.OutputPath = CStr(File) - bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False) - If bRetVal = True Then - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - For Range = 0 To RangeCnt -1 - KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) - KindOfRange = UCase(KindOfRange) - Address = CLng(ParameterObj.Parameter(ParamIndex +1)) - Length = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - If IsNumeric(KindOfRange) Then - If KindOfRange = 12 Then - DisASMObj.AddRange Address,Length,1 - ElseIf KindOfRange = 219 Then - DisASMObj.AddRange Address,Length,2 - ElseIf KindOfRange = 221 Then - DisASMObj.AddRange Address,Length,4 - Else - MsgBox "Invalid range type " & KindOfRange & "of range " & Range +1 - Exit Sub - End If - Else - If KindOfRange = "C" Then - DisASMObj.AddRange Address,Length,1 - ElseIf KindOfRange = "DB" Then - DisASMObj.AddRange Address,Length,2 - ElseIf KindOfRange = "DW" Then - DisASMObj.AddRange Address,Length,3 - ElseIf KindOfRange = "DD" Then - DisASMObj.AddRange Address,Length,4 - Else - MsgBox "Invalid range type " & KindOfRange & "of range " & Range +1 - Exit Sub - End If - End If - Next - DisASMObj.HexFileModeFlag = False - DisASMObj.ListModeFlag = False - DisASMObj.WriteAllRanges(False) - End If - -End Sub - -'_______________________________________________________ -' -' SaveHEX command line function -' -' generates intel-HEX file -' -' command line SaveHex output-file range1 [range2] [range3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub SaveHEX(File,ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - If IsNumeric(File) Then - MsgBox "File parameter wrong - " & File - Exit Sub - End If - DisASMObj.OutputPath = CStr(File) - bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False) - If bRetVal = True Then - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 2 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/2 - ParamIndex = 0 - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)) - ParamIndex = ParamIndex +2 - DisASMObj.AddRange Address,Length,0 - Next - DisASMObj.HexFileModeFlag = True - DisASMObj.WriteAllRanges(False) - End If - -End Sub - -'_______________________________________________________ -' -' FillByte command line function -' -' fills memory range with byte pattern -' -' command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub FillByte(ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - set udearrayobj = debugger.ByteArrayObj(1) - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)) - Pattern = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - udearrayobj.Resize(Length) - udearrayobj.Fill(Pattern) - debugger.Write Address,udearrayobj - Next - -End Sub - -'_______________________________________________________ -' -' FillWord command line function -' -' fills memory range with word pattern -' -' command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub FillWord(ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - set udearrayobj = debugger.WordArrayObj(1) - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2) - Pattern = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - udearrayobj.Resize(Length) - udearrayobj.Fill(Pattern) - debugger.Write Address,udearrayobj - Next - -End Sub - -'_______________________________________________________ -' -' FillDWord command line function -' -' fills memory range with dword pattern -' -' command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub FillDWord(ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - set udearrayobj = debugger.DWordArrayObj(1) - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4) - Pattern = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - udearrayobj.Resize(Length) - udearrayobj.Fill(Pattern) - debugger.Write Address,udearrayobj - Next - -End Sub63VBScript24.11.2006 14:43:20:0001WS_CORE_DUOMacro_24_02_14_14_13_33_010Execute UnAss ..Macro UnAssExecute macro UnAss0210Execute SaveHEX ..Macro SaveHEXExecute macro SaveHEX0210Execute FillByte ..Macro FillByteExecute macro FillByte0110Execute FillWord ..Macro FillWordExecute macro FillWord0110Execute FillDWord ..Macro FillDWordExecute macro FillDWord0150128.08.2013 15:32:24:4787782650Target0.Controller0.Core01028.08.2013 15:00:07:1767782740Target0.Controller0.Core0110228.08.2013 15:30:43:451..\main.c17372830Target0.Controller0.Core01024.02.2014 14:12:15:832..\..\..\..\os\hal\ports\SPC5\SPC56ECxx\hal_lld.c27372880Target0.Controller0.Core011128.08.2013 15:31:19:129AwAAAA==AQAAAA==fQAAAA==UwAAAA==QwAAAA==QwAAAA==QwAAAA==QwAAAA==QwAAAA==SAAAAA==AAAAAA==AAAAAA==AAAAAA==AAAAAA==7782520Target0.Controller0.Core010028.08.2013 15:32:08:193144096008601642949672950Target0.Controller0.Core010000000001..\build\ch.elfSoftware;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC56ECxx OS-Less Test Application\main.c} .25';main.c;1;0;;$disabled; ;disabled; ;1..\build\ch.elf3,0000000000x140x141011100000verify.txt0000002..\main.c..\..\..\..\os\hal\ports\SPC5\SPC56ECxx\hal_lld.c028.08.2013 15:00:07:3797782860Target0.Controller0.Core111024.02.2014 14:11:46:971code <0xFFFFFC00-0xFFFFFFFF>87372870Target0.Controller0.Core111028.08.2013 15:30:43:4997372842949672950Target0.Controller0.Core1100000000002101..\build\out.elf01100001code <0xFFFFFC00-0xFFFFFFFF>stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg24.02.2014 14:13:32:999 diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg deleted file mode 100644 index efb0181..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg +++ /dev/null @@ -1,290 +0,0 @@ -[Main] -Signature=UDE_TARGINFO_2.0 -Description=STM SPC56EC74A256S Mini Module with Dual Core SPC56EC74 (Jtag) -Description1=MMU preinitialized, memory mapping 1:1, VLE enabled for SRAM and Flash -Description2=PLL set for 120MHz -Description3=FLASH programming prepared but not enabled -Description4=Write Filter for BAM Module -MCUs=Controller0 -Architecture=PowerPC -Vendor=STM -Board=SPC56EC74A256S Mini Module - -[Controller0] -Family=PowerPC -Type=SPC56EC74 -Enabled=1 -IntClock=120000 -MemDevs=BAMWriteFilter -ExtClock=40000 - -[Controller0.Core0] -Protocol=PPCJTAG -Enabled=1 - -[Controller0.Core1] -Protocol=PPCJTAG -Enabled=1 - -[Controller0.BAMWriteFilter] -Description=BAM WriteAccess Filter -Range0Start=0xFFFFC000 -Range0Size=0x4000 -Enabled=1 -Handler=AccessFilter -Mode=ReadOnly - -[Controller0.PFLASH] -Enabled=1 -EnableMemtoolByDefault=1 - -[Controller0.PFLASH1] -Enabled=1 -EnableMemtoolByDefault=1 - -[Controller0.DFLASH] -Enabled=1 -EnableMemtoolByDefault=1 - -[Controller0.SHADOWFLASH] -Enabled=1 -EnableMemtoolByDefault=0 - -[Controller0.Core0.LoadedAddOn] -UDEMemtool=1 - -[Controller0.Core0.PpcJtagTargIntf] -PortType=FTDI -ResetWaitTime=500 -MaxJtagClk=5000 -DoSramInit=1 -UseNexus=1 -AdaptiveJtagPhaseShift=1 -ConnOption=Default -ChangeJtagClk=-1 -HaltAfterReset=1 -SimioAddr=g_JtagSimioAccess -FreezeTimers=1 -InvalidTlbOnReset=1 -InvalidateCache=1 -ForceCacheFlush=1 -IgnoreLockedLines=0 -ExecInitCmds=1 -JtagTapNumber=0 -JtagNumOfTaps=1 -JtagNumIrBefore=0 -JtagNumIrAfter=0 -SimioAddr=g_JtagSimioAccess -FlushCache=0 -AllowMmuSetup=1 -UseExtReset=1 -HandleWdtBug=0 -ForceEndOfReset=0 -JtagViaPod=0 -AllowResetOnCheck=0 -ChangeMsr=0 -ChangeMsrValue=0x0 -ExecOnStartCmds=0 -ExecOnHaltCmds=0 -EnableProgramTimeMeasurement=0 -UseHwResetMode=0 -TargetPort=Default -HandleNexusAccessBug=0 -DoNotEnableTrapSwBrp=0 -BootPasswd0=0xFEEDFACE -BootPasswd1=0xCAFEBEEF -BootPasswd2=0xFFFFFFFF -BootPasswd3=0xFFFFFFFF -BootPasswd4=0xFFFFFFFF -BootPasswd5=0xFFFFFFFF -BootPasswd6=0xFFFFFFFF -BootPasswd7=0xFFFFFFFF -CommDevSel=PortType=USB,Type=FTDI -JtagIoType=Jtag -ExecOnHaltCmdsWhileHalted=0 -TimerForPTM=Default -AllowBreakOnUpdateBreakpoints=0 -ClearDebugStatusOnHalt=1 -HwResetMode=Simulate -UseMasterNexusIfResetState=1 -UseLocalAddressTranslation=1 -Use64BitNexus=0 -InitSramOnlyWhenNotInitialized=0 -AllowHarrForUpdateDebugRegs=0 -DisableE2EECC=0 -UseCore0ForNexusMemoryAccessWhileRunning=0 - -[Controller0.Core0.PpcJtagTargIntf.InitScript] - -// select TLB 1 -SETSPR 0x274 0x10000108 0xFFFFFFFF - -// programm internal Flash, no cache because of flash -// TLB 1, entry 0 -SETSPR 0x270 0x10000000 0xFFFFFFFF -// Valid, protect against invalidation, global entry, size=16MB -SETSPR 0x271 0xC0000700 0xFFFFFFFF -// effective page number 00000000 -SETSPR 0x272 0x28 0xFFFFFFFF -// real page 00000000, UX,SX,UW,SW,UR,SR -SETSPR 0x273 0x3F 0xFFFFFFFF -// execute TLB write instruction -EXECOPCODE 0x7C0007A4 - -// programm internal SRAM -// TLB 1, entry 1 -SETSPR 0x270 0x10010000 0xFFFFFFFF -// Valid, protect against invalidation, global entry, size=16MB -SETSPR 0x271 0xC0000700 0xFFFFFFFF -// effective page number 40000000, I -SETSPR 0x272 0x40000028 0xFFFFFFFF -// real page 0x40000000, UX,SX,UW,SW,UR,SR -SETSPR 0x273 0x4000003F 0xFFFFFFFF -// execute TLB write instruction -EXECOPCODE 0x7C0007A4 - -// programm peripheral A modules -// TLB 1, entry 2 -SETSPR 0x270 0x10020000 0xFFFFFFFF -// Valid, protect against invalidation, global entry, size=1MB -SETSPR 0x271 0xC0000500 0xFFFFFFFF -// effective page number C3F00000, I -SETSPR 0x272 0xC3F0000A 0xFFFFFFFF -// real page C3F00000, UX,SX,UW,SW,UR,SR -SETSPR 0x273 0xC3F0003F 0xFFFFFFFF -// execute TLB write instruction -EXECOPCODE 0x7C0007A4 - -// programm off plattfrom modules -// TLB 1, entry 3 -SETSPR 0x270 0x10030000 0xFFFFFFFF -// Valid, protect against invalidation, global entry, size=1MB -SETSPR 0x271 0xC0000500 0xFFFFFFFF -// effective page number FFE00000, I,G -SETSPR 0x272 0xFFE0000A 0xFFFFFFFF -// real page FFE00000, UX,SX,UW,SW,UR,SR -SETSPR 0x273 0xFFE0003F 0xFFFFFFFF -// execute TLB write instruction -EXECOPCODE 0x7C0007A4 - -// programm on plattfrom modules -// TLB 1, entry 4 -SETSPR 0x270 0x10040000 0xFFFFFFFF -// Valid, protect against invalidation, global entry, size=1MB -SETSPR 0x271 0xC0000500 0xFFFFFFFF -// effective page number FFF00000, I,G -SETSPR 0x272 0xFFF0000A 0xFFFFFFFF -// real page FFF00000, UX,SX,UW,SW,UR,SR -SETSPR 0x273 0xFFF0003F 0xFFFFFFFF -// execute TLB write instruction -EXECOPCODE 0x7C0007A4 - -// setup IVOPR -// points to internal memory at 0x40000000 -SETSPR 0x3F 0x40000000 0xFFFFFFFF - -// disable watchdog -SET SWT_SR 0x0000C520 -SET SWT_SR 0x0000D928 -SET SWT_CR 0xFF00000A - -// setup pll and clocks -// Oscillator select -SET 0xC3FE0374 0x1000000 -SET 0xC3FE0370 0x1 -// enable all modes -SET 0xC3FDC008 0x5FF -// run mode -SET 0xC3FDC02C 0x1F0032 -// enable peripherals in run and low power modes -SET 0xC3FDC080 0xFE -SET 0xC3FDC0A0 0x500 -// Z0 clock dividers -> 0.5 system clock -//SET8 0xC3FE00C0 0x01 -// system clock dividers -SET8 0xC3FE037C 0x80 -SET8 0xC3FE037D 0x80 -SET8 0xC3FE037E 0x80 -// enable auxiliary clocks -SET16 0xC3FE0380 0x100 -SET16 0xC3FE0388 0x0 -SET8 0xC3FE038C 0x80 -// setup clock monitor -SET 0xC3FE0100 0x6 -// Make DRUN configuration active -SET 0xC3FDC004 0x30005AF0 -SET 0xC3FDC004 0x3000A50F -WAIT 5 -// setup pll to 120MHz 40Mz external -SET 0xC3FE00A0 0x0D300041 -// run mode -SET 0xC3FDC02C 0x1F00F4 -// Make DRUN configuration active -SET 0xC3FDC004 0x30005AF0 -SET 0xC3FDC004 0x3000A50F -WAIT 5 -// setup SSCM erro cfg for debug -SET 0xC3FD8006 0x3 0x3 - -[Controller0.Core0.PpcJtagTargIntf.OnStartScript] - -[Controller0.Core0.PpcJtagTargIntf.OnHaltScript] - -[Controller0.Core1.PpcJtagTargIntf] -PortType=Default -ResetWaitTime=500 -MaxJtagClk=5000 -DoSramInit=1 -UseNexus=1 -AdaptiveJtagPhaseShift=1 -ConnOption=Break -ChangeJtagClk=-1 -HaltAfterReset=0 -SimioAddr=g_JtagSimioAccess -FreezeTimers=1 -InvalidTlbOnReset=0 -InvalidateCache=0 -ForceCacheFlush=0 -IgnoreLockedLines=0 -ExecInitCmds=0 -JtagTapNumber=0 -JtagNumOfTaps=1 -JtagNumIrBefore=0 -JtagNumIrAfter=0 -SimioAddr=g_JtagSimioAccess -FlushCache=0 -AllowMmuSetup=0 -UseExtReset=0 -HandleWdtBug=0 -ForceEndOfReset=0 -JtagViaPod=0 -AllowResetOnCheck=0 -TargetPort=Default -ChangeMsr=0 -ChangeMsrValue=0x0 -ExecOnStartCmds=0 -ExecOnHaltCmds=0 -EnableProgramTimeMeasurement=0 -UseHwResetMode=0 -HandleNexusAccessBug=0 -DoNotEnableTrapSwBrp=0 -BootPasswd0=0xFEEDFACE -BootPasswd1=0xCAFEBEEF -BootPasswd2=0xFFFFFFFF -BootPasswd3=0xFFFFFFFF -BootPasswd4=0xFFFFFFFF -BootPasswd5=0xFFFFFFFF -BootPasswd6=0xFFFFFFFF -BootPasswd7=0xFFFFFFFF -CommDevSel= - -[Controller0.Core1.PpcJtagTargIntf.InitScript] - -[Controller0.Core1.PpcJtagTargIntf.OnStartScript] - -[Controller0.Core1.PpcJtagTargIntf.OnHaltScript] - -[Controller0.Core0.DebugServer.DbgFramework] -FRAMEWORK_COLOR=14804223 -[Controller0.Core1.DebugServer.DbgFramework] -FRAMEWORK_COLOR=16777152 diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h deleted file mode 100644 index f6244ad..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf deleted file mode 100644 index 0e49bcd..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf +++ /dev/null @@ -1,153 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio. - - This file is part of ChibiOS. - - ChibiOS is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - * SPC56EC74 memory setup. - */ -MEMORY -{ - rom : org = 0x00000000, len = 0x00300000 - dataflash : org = 0x00800000, len = 0x00010000 - ram : org = 0x40000000, len = 0x00030000 -} - -__irq_stack_size__ = 0; -__process_stack_size__ = 0x1000; - -__ram_size__ = SIZEOF(ram); -__ram_start__ = ADDR(ram); -__ram_end__ = ADDR(ram) + SIZEOF(ram); - -SECTIONS -{ - GROUP: - { - .boot ALIGN(16): - { - __ivpr_base__ = .; - KEEP(*(.boot)) - } - - .handlers (VLECODE) ALIGN(16): - { - KEEP(*(.handlers)) - } - - .crt0 (VLECODE) ALIGN(16): - { - KEEP(*(.crt0)) - } - - .init: {} - .init_vle (VLECODE) ALIGN(4): - { - *(.init) - *(.init_vle) - } - - .vectors ALIGN(0x800): - { - KEEP(*(.vectors)) - } - - .code (VLECODE) ALIGN(16): - { - *(.text) - *(.text_vle) - } - - .const (CONST) ALIGN(16): - { - *(.rdata) - *(.rodata) - } - - .sdata2 (CONST) ALIGN(16): - { - __sdata2_start__ = . + 0x8000; - *(.sdata2) - *(.sbss2) - } - - .ctors: {} - .dtors: {} - extab: {} - extabindex: {} - - . = ALIGN(4); - __romdata_start__ = .; - } > rom - - GROUP: - { - .stacks: - { - . = ALIGN(8); - __irq_stack_base__ = .; - . = . + __irq_stack_size__; - . = ALIGN(8); - __irq_stack_end__ = .; - __process_stack_base__ = .; - __main_thread_stack_base__ = .; - . = . + __process_stack_size__; - . = ALIGN(8); - __process_stack_end__ = .; - __main_thread_stack_end__ = .; - } - - .data (DATA) LOAD(__romdata_start__): - { - . = ALIGN(4); - __data_start__ = .; - *(.data) - . = ALIGN(4); - } - - .sdata (DATA) LOAD(ROMADDR(.data) + SIZEOF(.data)): - { - __sdata_start__ = . + 0x8000; - *(.sdata) - __data_end__ = .; - } - - .sbss (BSS): - { - __bss_start__ = .; - *(.sbss) - } - - .bss (BSS): - { - *(.bss) - __bss_end__ = .; - } - - /* The default heap uses the (statically) unused part of a RAM section.*/ - .heap: - { - . = ALIGN(8); - __heap_base__ = .; - . = ADDR(ram) + SIZEOF(ram); - __heap_end__ = .; - } - - .PPC.EMB.sdata0: {} - .PPC.EMB.sbss0: {} - } > ram -} diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp deleted file mode 100644 index f4823f0..0000000 Binary files a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp and /dev/null differ diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h deleted file mode 100644 index 6827953..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c deleted file mode 100644 index 957f0e8..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "test.h" -#include "shell.h" -#include "chprintf.h" - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(1024) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.sp, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD1, - commands -}; - -/* - * LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - - while (true) { - unsigned i; - - for (i = 0; i < 4; i++) { - palClearPad(PORT_E, PE_LED1); - chThdSleepMilliseconds(100); - palClearPad(PORT_E, PE_LED2); - chThdSleepMilliseconds(100); - palClearPad(PORT_E, PE_LED3); - chThdSleepMilliseconds(100); - palClearPad(PORT_E, PE_LED4); - chThdSleepMilliseconds(100); - palSetPad(PORT_E, PE_LED1); - chThdSleepMilliseconds(100); - palSetPad(PORT_E, PE_LED2); - chThdSleepMilliseconds(100); - palSetPad(PORT_E, PE_LED3); - chThdSleepMilliseconds(100); - palSetPad(PORT_E, PE_LED4); - chThdSleepMilliseconds(300); - } - - for (i = 0; i < 4; i++) { - palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) | - PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4)); - chThdSleepMilliseconds(500); - palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) | - PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4)); - chThdSleepMilliseconds(500); - } - - for (i = 0; i < 4; i++) { - palTogglePad(PORT_E, PE_LED1); - chThdSleepMilliseconds(250); - palTogglePad(PORT_E, PE_LED1); - palTogglePad(PORT_E, PE_LED2); - chThdSleepMilliseconds(250); - palTogglePad(PORT_E, PE_LED2); - palTogglePad(PORT_E, PE_LED3); - chThdSleepMilliseconds(250); - palTogglePad(PORT_E, PE_LED3); - palTogglePad(PORT_E, PE_LED4); - chThdSleepMilliseconds(250); - palTogglePad(PORT_E, PE_LED4); - } - - for (i = 0; i < 4; i++) { - palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3)); - palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4)); - chThdSleepMilliseconds(500); - palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4)); - palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3)); - chThdSleepMilliseconds(500); - } - - palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) | - PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4)); - } -} - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Activates the serial driver 1 using the driver default configuration. - */ - sdStart(&SD1, NULL); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity. - */ - while (true) { - if (!shelltp) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } - return 0; -} diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h deleted file mode 100644 index 0172e81..0000000 --- a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * SPC56ECxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC56ECxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 60 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_XOSCDIV_VALUE 1 -#define SPC5_IRCDIV_VALUE 1 -#define SPC5_PERIPHERAL1_CLK_DIV_VALUE 4 -#define SPC5_PERIPHERAL2_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL3_CLK_DIV_VALUE 2 -#define SPC5_Z0_CLK_DIV_VALUE 2 -#define SPC5_FEC_CLK_DIV_VALUE 2 -#define SPC5_FLASH_CLK_DIV_VALUE 2 -#define SPC5_CLOCK_FAILURE_HOOK() osalSysHalt("clock failure") - -#define SPC5_EMIOS0_GPRE_VALUE 20 -#define SPC5_EMIOS1_GPRE_VALUE 20 - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING (EDMA_CR_GRP1PRI(1) | \ - EDMA_CR_GRP0PRI(0) | \ - EDMA_CR_EMLM | \ - EDMA_CR_ERGA) -#define SPC5_EDMA_GROUP0_PRIORITIES 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_GROUP1_PRIORITIES 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 12 -#define SPC5_EDMA_ERROR_HANDLER() osalSysHalt("DMA failure") - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 FALSE -#define SPC5_SERIAL_USE_LINFLEX2 FALSE -#define SPC5_SERIAL_USE_LINFLEX3 FALSE -#define SPC5_SERIAL_USE_LINFLEX4 FALSE -#define SPC5_SERIAL_USE_LINFLEX5 FALSE -#define SPC5_SERIAL_USE_LINFLEX6 FALSE -#define SPC5_SERIAL_USE_LINFLEX7 FALSE -#define SPC5_SERIAL_USE_LINFLEX8 FALSE -#define SPC5_SERIAL_USE_LINFLEX9 FALSE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX2_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX3_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX4_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX5_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX6_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX7_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX8_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX9_PRIORITY 8 - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI0 FALSE -#define SPC5_SPI_USE_DSPI1 FALSE -#define SPC5_SPI_USE_DSPI2 FALSE -#define SPC5_SPI_USE_DSPI3 FALSE -#define SPC5_SPI_USE_DSPI4 FALSE -#define SPC5_SPI_USE_DSPI5 FALSE -#define SPC5_SPI_USE_DSPI6 FALSE -#define SPC5_SPI_USE_DSPI7 FALSE -#define SPC5_SPI_DMA_MODE SPC5_SPI_DMA_RX_ONLY -#define SPC5_SPI_DSPI0_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5) -#define SPC5_SPI_DSPI1_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4) -#define SPC5_SPI_DSPI2_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3) -#define SPC5_SPI_DSPI3_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1) -#define SPC5_SPI_DSPI4_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1) -#define SPC5_SPI_DSPI5_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2) -#define SPC5_SPI_DSPI6_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3) -#define SPC5_SPI_DSPI7_MCR (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3) -#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID 4 -#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID 5 -#define SPC5_SPI_DSPI0_RX_DMA_CH_ID 6 -#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID 7 -#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID 8 -#define SPC5_SPI_DSPI1_RX_DMA_CH_ID 9 -#define SPC5_SPI_DSPI2_TX1_DMA_CH_ID 10 -#define SPC5_SPI_DSPI2_TX2_DMA_CH_ID 11 -#define SPC5_SPI_DSPI2_RX_DMA_CH_ID 12 -#define SPC5_SPI_DSPI3_TX1_DMA_CH_ID 13 -#define SPC5_SPI_DSPI3_TX2_DMA_CH_ID 14 -#define SPC5_SPI_DSPI3_RX_DMA_CH_ID 15 -#define SPC5_SPI_DSPI4_TX1_DMA_CH_ID 16 -#define SPC5_SPI_DSPI4_TX2_DMA_CH_ID 17 -#define SPC5_SPI_DSPI4_RX_DMA_CH_ID 18 -#define SPC5_SPI_DSPI5_TX1_DMA_CH_ID 19 -#define SPC5_SPI_DSPI5_TX2_DMA_CH_ID 20 -#define SPC5_SPI_DSPI5_RX_DMA_CH_ID 21 -#define SPC5_SPI_DSPI6_TX1_DMA_CH_ID 22 -#define SPC5_SPI_DSPI6_TX2_DMA_CH_ID 23 -#define SPC5_SPI_DSPI6_RX_DMA_CH_ID 24 -#define SPC5_SPI_DSPI7_TX1_DMA_CH_ID 25 -#define SPC5_SPI_DSPI7_TX2_DMA_CH_ID 26 -#define SPC5_SPI_DSPI7_RX_DMA_CH_ID 27 -#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI4_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI5_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI6_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI7_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI0_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_IRQ_PRIO 10 -#define SPC5_SPI_DSPI4_IRQ_PRIO 10 -#define SPC5_SPI_DSPI5_IRQ_PRIO 10 -#define SPC5_SPI_DSPI6_IRQ_PRIO 10 -#define SPC5_SPI_DSPI7_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DSPI DMA failure") - -/* - * ICU-PWM driver system settings. - */ -#define SPC5_ICU_USE_EMIOS0_CH0 FALSE -#define SPC5_ICU_USE_EMIOS0_CH1 FALSE -#define SPC5_ICU_USE_EMIOS0_CH2 FALSE -#define SPC5_ICU_USE_EMIOS0_CH3 FALSE -#define SPC5_ICU_USE_EMIOS0_CH4 FALSE -#define SPC5_ICU_USE_EMIOS0_CH5 FALSE -#define SPC5_ICU_USE_EMIOS0_CH6 FALSE -#define SPC5_ICU_USE_EMIOS0_CH7 FALSE -#define SPC5_ICU_USE_EMIOS0_CH24 FALSE - -#define SPC5_PWM_USE_EMIOS0_GROUP0 FALSE -#define SPC5_PWM_USE_EMIOS0_GROUP1 FALSE - -#define SPC5_EMIOS0_GFR_F0F1_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F2F3_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F4F5_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F6F7_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F8F9_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F10F11_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F12F13_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F14F15_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F16F17_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F18F19_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F20F21_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F22F23_PRIORITY 8 -#define SPC5_EMIOS0_GFR_F24F25_PRIORITY 8 - -#define SPC5_EMIOS0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_EMIOS0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_EMIOS1_CH24 FALSE - -#define SPC5_PWM_USE_EMIOS1_GROUP0 FALSE -#define SPC5_PWM_USE_EMIOS1_GROUP1 FALSE -#define SPC5_PWM_USE_EMIOS1_GROUP2 FALSE - -#define SPC5_EMIOS1_GFR_F0F1_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F2F3_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F4F5_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F6F7_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F8F9_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F10F11_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F12F13_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F14F15_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F16F17_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F18F19_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F20F21_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F22F23_PRIORITY 8 -#define SPC5_EMIOS1_GFR_F24F25_PRIORITY 8 - -#define SPC5_EMIOS1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_EMIOS1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * CAN driver system settings. - */ -#define SPC5_CAN_USE_FILTERS FALSE - -#define SPC5_CAN_USE_FLEXCAN0 FALSE -#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK FALSE -#define SPC5_CAN_FLEXCAN0_PRIORITY 11 -#define SPC5_CAN_FLEXCAN0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN1 FALSE -#define SPC5_CAN_FLEXCAN1_USE_EXT_CLK FALSE -#define SPC5_CAN_FLEXCAN1_PRIORITY 11 -#define SPC5_CAN_FLEXCAN1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN2 FALSE -#define SPC5_CAN_FLEXCAN2_USE_EXT_CLK FALSE -#define SPC5_CAN_FLEXCAN2_PRIORITY 11 -#define SPC5_CAN_FLEXCAN2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN3 FALSE -#define SPC5_CAN_FLEXCAN3_USE_EXT_CLK FALSE -#define SPC5_CAN_FLEXCAN3_PRIORITY 11 -#define SPC5_CAN_FLEXCAN3_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN3_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN4 FALSE -#define SPC5_CAN_FLEXCAN4_USE_EXT_CLK FALSE -#define SPC5_CAN_FLEXCAN4_PRIORITY 11 -#define SPC5_CAN_FLEXCAN4_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN4_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN5 FALSE -#define SPC5_CAN_FLEXCAN5_USE_EXT_CLK FALSE -#define SPC5_CAN_FLEXCAN5_PRIORITY 11 -#define SPC5_CAN_FLEXCAN5_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN5_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* -* ADC driver system settings. -*/ -#define SPC5_ADC_USE_ADC0 FALSE -#define SPC5_ADC_ADC0_CLK_FREQUENCY HALF_PERIPHERAL_SET_CLOCK_FREQUENCY -#define SPC5_ADC_ADC0_AUTO_CLOCK_OFF FALSE -#define SPC5_ADC_ADC0_WD_PRIORITY 12 -#define SPC5_ADC_ADC0_DMA_CH_ID 1 -#define SPC5_ADC_ADC0_DMA_IRQ_PRIO 12 -#define SPC5_ADC_ADC0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ADC_ADC0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ADC_USE_ADC1 FALSE -#define SPC5_ADC_ADC1_CLK_FREQUENCY HALF_PERIPHERAL_SET_CLOCK_FREQUENCY -#define SPC5_ADC_ADC1_AUTO_CLOCK_OFF FALSE -#define SPC5_ADC_ADC1_WD_PRIORITY 12 -#define SPC5_ADC_ADC1_DMA_CH_ID 2 -#define SPC5_ADC_ADC1_DMA_IRQ_PRIO 12 -#define SPC5_ADC_ADC1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ADC_ADC1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#endif /* _MCUCONF_H_ */ -- cgit v1.2.3