From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- .../demos/various/NIL-ARMCM0-GENERIC/.cproject | 55 --- .../demos/various/NIL-ARMCM0-GENERIC/.project | 95 ---- .../demos/various/NIL-ARMCM0-GENERIC/Makefile | 217 --------- ...L-ARMC0-GENERIC (OpenOCD, Flash and Run).launch | 52 --- .../demos/various/NIL-ARMCM0-GENERIC/main.c | 104 ----- .../demos/various/NIL-ARMCM0-GENERIC/nilconf.h | 179 -------- .../demos/various/NIL-ARMCM4-GENERIC/.cproject | 52 --- .../demos/various/NIL-ARMCM4-GENERIC/.project | 95 ---- .../demos/various/NIL-ARMCM4-GENERIC/Makefile | 222 --------- ...L-ARMC4-GENERIC (OpenOCD, Flash and Run).launch | 52 --- .../demos/various/NIL-ARMCM4-GENERIC/main.c | 104 ----- .../demos/various/NIL-ARMCM4-GENERIC/nilconf.h | 179 -------- .../demos/various/RT-ARM7-GENERIC/.cproject | 52 --- .../demos/various/RT-ARM7-GENERIC/.project | 90 ---- .../demos/various/RT-ARM7-GENERIC/Makefile | 246 ---------- .../demos/various/RT-ARM7-GENERIC/chconf.h | 499 --------------------- ...-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch | 52 --- .../demos/various/RT-ARM7-GENERIC/main.c | 57 --- .../demos/various/RT-ARM7-GENERIC/readme.txt | 17 - .../demos/various/RT-ARMCM0-GENERIC/.cproject | 52 --- .../demos/various/RT-ARMCM0-GENERIC/.project | 90 ---- .../demos/various/RT-ARMCM0-GENERIC/Makefile | 217 --------- .../demos/various/RT-ARMCM0-GENERIC/chconf.h | 499 --------------------- ...-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch | 52 --- .../demos/various/RT-ARMCM0-GENERIC/main.c | 90 ---- .../demos/various/RT-ARMCM0-GENERIC/readme.txt | 17 - .../demos/various/RT-ARMCM4-GENERIC/.cproject | 52 --- .../demos/various/RT-ARMCM4-GENERIC/.project | 90 ---- .../demos/various/RT-ARMCM4-GENERIC/Makefile | 222 --------- .../demos/various/RT-ARMCM4-GENERIC/chconf.h | 499 --------------------- ...-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch | 52 --- .../demos/various/RT-ARMCM4-GENERIC/main.c | 90 ---- .../demos/various/RT-ARMCM4-GENERIC/readme.txt | 17 - .../demos/various/RT-Win32-Simulator/.cproject | 50 --- .../demos/various/RT-Win32-Simulator/.project | 43 -- .../demos/various/RT-Win32-Simulator/Makefile | 151 ------- .../demos/various/RT-Win32-Simulator/chconf.h | 499 --------------------- .../demos/various/RT-Win32-Simulator/halconf.h | 365 --------------- .../demos/various/RT-Win32-Simulator/main.c | 252 ----------- .../demos/various/RT-Win32-Simulator/readme.txt | 33 -- 40 files changed, 5851 deletions(-) delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c delete mode 100644 ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c delete mode 100644 ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c delete mode 100644 ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt (limited to 'ChibiOS_16.1.5/demos/various') diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject deleted file mode 100644 index 9109f18..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject +++ /dev/null @@ -1,55 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project deleted file mode 100644 index 8746134..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project +++ /dev/null @@ -1,95 +0,0 @@ - - - NIL-ARMCM0-GENERIC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - - - - org.eclipse.cdt.make.core.buildCommand - mingw32-make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - false - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile deleted file mode 100644 index de47bb7..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile +++ /dev/null @@ -1,217 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x100 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk -# HAL-OSAL files (optional). -#include $(CHIBIOS)/os/hal/hal.mk -#include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -#include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk -#include $(CHIBIOS)/os/hal/osal/nil/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/nil/nil.mk -include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -#include $(CHIBIOS)/test/nil/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -DSTM32F051x8 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - -############################################################################## -# MISRA check rule, requires PCLint and the setup files, not provided. -# -misra: - @lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch deleted file mode 100644 index 4ca089d..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c deleted file mode 100644 index a233632..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "nil.h" - -#if !defined(SYSTEM_CLOCK) -#define SYSTEM_CLOCK 8000000U -#endif - -/* - * @brief System Timer handler. - */ -CH_IRQ_HANDLER(SysTick_Handler) { - - CH_IRQ_PROLOGUE(); - - chSysLockFromISR(); - chSysTimerHandlerI(); - chSysUnlockFromISR(); - - CH_IRQ_EPILOGUE(); -} - -static uint32_t seconds_counter; -static uint32_t minutes_counter; - -/* - * Seconds counter thread. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - while (true) { - chThdSleepMilliseconds(1000); - seconds_counter++; - } -} - -/* - * Minutes counter thread. - */ -static THD_WORKING_AREA(waThread2, 128); -static THD_FUNCTION(Thread2, arg) { - - (void)arg; - - while (true) { - chThdSleepSeconds(60); - minutes_counter++; - } -} - -/* - * Threads static table, one entry per thread. The number of entries must - * match NIL_CFG_NUM_THREADS. - */ -THD_TABLE_BEGIN -THD_TABLE_ENTRY(waThread1, "counter1", Thread1, NULL) -THD_TABLE_ENTRY(waThread2, "counter2", Thread2, NULL) -THD_TABLE_END - -/* - * Application entry point. - */ -int main(void) { - - /* - * Hardware initialization, in this simple demo just the systick timer is - * initialized. - */ - SysTick->LOAD = SYSTEM_CLOCK / NIL_CFG_ST_FREQUENCY - (systime_t)1; - SysTick->VAL = (uint32_t)0; - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | - SysTick_CTRL_TICKINT_Msk; - - /* - * System initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - chSysInit(); - - /* This is now the idle thread loop, you may perform here a low priority - task but you must never try to sleep or wait in this loop. Note that - this tasks runs at the lowest priority level so any instruction added - here will be executed after all other tasks have been started.*/ - while (true) { - } -} diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h deleted file mode 100644 index 27b6bac..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nilconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _NILCONF_H_ -#define _NILCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of user threads in the application. - * @note This number is not inclusive of the idle thread which is - * Implicitly handled. - */ -#define NIL_CFG_NUM_THREADS 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name System timer settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define NIL_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @note This value together with the @p NIL_CFG_ST_RESOLUTION - * option defines the maximum amount of time allowed for - * timeouts. - */ -#define NIL_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define NIL_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define NIL_CFG_USE_EVENTS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System assertions. - */ -#define NIL_CFG_ENABLE_ASSERTS FALSE - -/** - * @brief Stack check. - */ -#define NIL_CFG_ENABLE_STACK_CHECK FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System initialization hook. - */ -#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__) -#define NIL_CFG_SYSTEM_INIT_HOOK() { \ -} -#endif - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define NIL_CFG_THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - */ -#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) { \ - /* Add custom threads initialization code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define NIL_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define NIL_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief System halt hook. - */ -#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define NIL_CFG_SYSTEM_HALT_HOOK(reason) { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in nilcore.h). */ -/*===========================================================================*/ - -#endif /* _NILCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject deleted file mode 100644 index d9e1ee7..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project deleted file mode 100644 index d0b5986..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project +++ /dev/null @@ -1,95 +0,0 @@ - - - NIL-ARMCM4-GENERIC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - - - - org.eclipse.cdt.make.core.buildCommand - mingw32-make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - false - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile deleted file mode 100644 index 1b4ebb8..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x100 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -#include $(CHIBIOS)/os/hal/hal.mk -#include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -#include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -#include $(CHIBIOS)/os/hal/osal/nil/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/nil/nil.mk -include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/nil/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -DSTM32F407xx - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - -############################################################################## -# MISRA check rule, requires PCLint and the setup files, not provided. -# -misra: - @lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch deleted file mode 100644 index 9241157..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c deleted file mode 100644 index a233632..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "nil.h" - -#if !defined(SYSTEM_CLOCK) -#define SYSTEM_CLOCK 8000000U -#endif - -/* - * @brief System Timer handler. - */ -CH_IRQ_HANDLER(SysTick_Handler) { - - CH_IRQ_PROLOGUE(); - - chSysLockFromISR(); - chSysTimerHandlerI(); - chSysUnlockFromISR(); - - CH_IRQ_EPILOGUE(); -} - -static uint32_t seconds_counter; -static uint32_t minutes_counter; - -/* - * Seconds counter thread. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - while (true) { - chThdSleepMilliseconds(1000); - seconds_counter++; - } -} - -/* - * Minutes counter thread. - */ -static THD_WORKING_AREA(waThread2, 128); -static THD_FUNCTION(Thread2, arg) { - - (void)arg; - - while (true) { - chThdSleepSeconds(60); - minutes_counter++; - } -} - -/* - * Threads static table, one entry per thread. The number of entries must - * match NIL_CFG_NUM_THREADS. - */ -THD_TABLE_BEGIN -THD_TABLE_ENTRY(waThread1, "counter1", Thread1, NULL) -THD_TABLE_ENTRY(waThread2, "counter2", Thread2, NULL) -THD_TABLE_END - -/* - * Application entry point. - */ -int main(void) { - - /* - * Hardware initialization, in this simple demo just the systick timer is - * initialized. - */ - SysTick->LOAD = SYSTEM_CLOCK / NIL_CFG_ST_FREQUENCY - (systime_t)1; - SysTick->VAL = (uint32_t)0; - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | - SysTick_CTRL_TICKINT_Msk; - - /* - * System initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - chSysInit(); - - /* This is now the idle thread loop, you may perform here a low priority - task but you must never try to sleep or wait in this loop. Note that - this tasks runs at the lowest priority level so any instruction added - here will be executed after all other tasks have been started.*/ - while (true) { - } -} diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h deleted file mode 100644 index 27b6bac..0000000 --- a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file nilconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _NILCONF_H_ -#define _NILCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of user threads in the application. - * @note This number is not inclusive of the idle thread which is - * Implicitly handled. - */ -#define NIL_CFG_NUM_THREADS 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name System timer settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define NIL_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @note This value together with the @p NIL_CFG_ST_RESOLUTION - * option defines the maximum amount of time allowed for - * timeouts. - */ -#define NIL_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define NIL_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define NIL_CFG_USE_EVENTS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System assertions. - */ -#define NIL_CFG_ENABLE_ASSERTS FALSE - -/** - * @brief Stack check. - */ -#define NIL_CFG_ENABLE_STACK_CHECK FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System initialization hook. - */ -#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__) -#define NIL_CFG_SYSTEM_INIT_HOOK() { \ -} -#endif - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define NIL_CFG_THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - */ -#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) { \ - /* Add custom threads initialization code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define NIL_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define NIL_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief System halt hook. - */ -#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define NIL_CFG_SYSTEM_HALT_HOOK(reason) { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in nilcore.h). */ -/*===========================================================================*/ - -#endif /* _NILCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject deleted file mode 100644 index 9b46e0d..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project deleted file mode 100644 index 8fab5aa..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - RT-ARM7-GENERIC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile deleted file mode 100644 index bd26b72..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile +++ /dev/null @@ -1,246 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = no -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the ARM System/User stack. This -# stack is the stack used by the main() thread. -ifeq ($(USE_SYSTEM_STACKSIZE),) - USE_SYSTEM_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the ARM IRQ stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_IRQ_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the ARM FIQ stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_FIQ_STACKSIZE),) - USE_FIQ_STACKSIZE = 64 -endif - -# Stack size to the allocated to the ARM Supervisor stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_SUPERVISOR_STACKSIZE),) - USE_SUPERVISOR_STACKSIZE = 8 -endif - -# Stack size to the allocated to the ARM Undefined stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_UND_STACKSIZE),) - USE_UND_STACKSIZE = 8 -endif - -# Stack size to the allocated to the ARM Abort stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_ABT_STACKSIZE),) - USE_ABT_STACKSIZE = 8 -endif - -# Enables the use of FPU. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARM/compilers/GCC/mk/startup_lpc214x.mk -# HAL-OSAL files (optional). -#include $(CHIBIOS)/os/hal/hal.mk -#include $(CHIBIOS)/os/hal/ports/LPC/LPC214x/platform.mk -#include $(CHIBIOS)/os/hal/boards/OLIMEX_LPC_P2148/board.mk -#include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARM/compilers/GCC/mk/port_generic.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/LPC2148.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = arm7tdmi - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARM/compilers/GCC -include $(RULESPATH)/rules.mk - -############################################################################## -# MISRA check rule, requires PCLint and the setup files, not provided. -# -misra: - @lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h deleted file mode 100644 index f6244ad..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch deleted file mode 100644 index e136b6b..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c deleted file mode 100644 index fd6b655..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" - -/* - * This is a periodic thread that does absolutely nothing except sleeping. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("sleeper"); - - while (true) { - chThdSleepMilliseconds(1000); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - chSysInit(); - - /* - * Creates the example thread. - */ - (void) chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it just sleeps. - */ - while (true) { - chThdSleepMilliseconds(1000); - } -} diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt deleted file mode 100644 index b3feb75..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M0. ** -***************************************************************************** - -** TARGET ** - -The demo targets a generic ARM Cortex-M4 device without HAL support. - -** The Demo ** - -** Build Procedure ** - -** Notes ** - -The files ch.ld and cmparams.h must be customized for your device. You also -need to provide the CMSIS compliant device header from your vendor, it this -demo an ST header is used. diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject deleted file mode 100644 index 0300ed2..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project deleted file mode 100644 index 1e37dfe..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - RT-ARMCM0-GENERIC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile deleted file mode 100644 index a495b31..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile +++ /dev/null @@ -1,217 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk -# HAL-OSAL files (optional). -#include $(CHIBIOS)/os/hal/hal.mk -#include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -#include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk -#include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -DSTM32F051x8 - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - -############################################################################## -# MISRA check rule, requires PCLint and the setup files, not provided. -# -misra: - @lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h deleted file mode 100644 index f6244ad..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch deleted file mode 100644 index 73713c9..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c deleted file mode 100644 index 8bd7eee..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" - -#if !defined(SYSTEM_CLOCK) -#define SYSTEM_CLOCK 8000000U -#endif - -/* - * @brief System Timer handler. - */ -CH_IRQ_HANDLER(SysTick_Handler) { - - CH_IRQ_PROLOGUE(); - - chSysLockFromISR(); - chSysTimerHandlerI(); - chSysUnlockFromISR(); - - CH_IRQ_EPILOGUE(); -} - -static uint32_t seconds_counter; -static uint32_t minutes_counter; - -/* - * Seconds counter thread. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("counter"); - - while (true) { - chThdSleepMilliseconds(1000); - seconds_counter++; - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * Hardware initialization, in this simple demo just the systick timer is - * initialized. - */ - SysTick->LOAD = SYSTEM_CLOCK / CH_CFG_ST_FREQUENCY - (systime_t)1; - SysTick->VAL = (uint32_t)0; - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | - SysTick_CTRL_TICKINT_Msk; - - /* - * System initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - chSysInit(); - - /* - * Creates the example thread. - */ - (void) chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * increasing the minutes counter. - */ - while (true) { - chThdSleepSeconds(60); - minutes_counter++; - } -} diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt deleted file mode 100644 index b3feb75..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M0. ** -***************************************************************************** - -** TARGET ** - -The demo targets a generic ARM Cortex-M4 device without HAL support. - -** The Demo ** - -** Build Procedure ** - -** Notes ** - -The files ch.ld and cmparams.h must be customized for your device. You also -need to provide the CMSIS compliant device header from your vendor, it this -demo an ST header is used. diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject deleted file mode 100644 index 0f2085e..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project deleted file mode 100644 index 46e96a0..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - RT-ARMCM4-GENERIC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile deleted file mode 100644 index f9dc658..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -#include $(CHIBIOS)/os/hal/hal.mk -#include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -#include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -#include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -DSTM32F407xx - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk - -############################################################################## -# MISRA check rule, requires PCLint and the setup files, not provided. -# -misra: - @lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h deleted file mode 100644 index f2f2859..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch deleted file mode 100644 index 60b3b6b..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c deleted file mode 100644 index 8bd7eee..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" - -#if !defined(SYSTEM_CLOCK) -#define SYSTEM_CLOCK 8000000U -#endif - -/* - * @brief System Timer handler. - */ -CH_IRQ_HANDLER(SysTick_Handler) { - - CH_IRQ_PROLOGUE(); - - chSysLockFromISR(); - chSysTimerHandlerI(); - chSysUnlockFromISR(); - - CH_IRQ_EPILOGUE(); -} - -static uint32_t seconds_counter; -static uint32_t minutes_counter; - -/* - * Seconds counter thread. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("counter"); - - while (true) { - chThdSleepMilliseconds(1000); - seconds_counter++; - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * Hardware initialization, in this simple demo just the systick timer is - * initialized. - */ - SysTick->LOAD = SYSTEM_CLOCK / CH_CFG_ST_FREQUENCY - (systime_t)1; - SysTick->VAL = (uint32_t)0; - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | - SysTick_CTRL_TICKINT_Msk; - - /* - * System initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - chSysInit(); - - /* - * Creates the example thread. - */ - (void) chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * increasing the minutes counter. - */ - while (true) { - chThdSleepSeconds(60); - minutes_counter++; - } -} diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt deleted file mode 100644 index da9c630..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt +++ /dev/null @@ -1,17 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4. ** -***************************************************************************** - -** TARGET ** - -The demo targets a generic ARM Cortex-M4 device without HAL support. - -** The Demo ** - -** Build Procedure ** - -** Notes ** - -The files ch.ld and cmparams.h must be customized for your device. You also -need to provide the CMSIS compliant device header from your vendor, it this -demo an ST header is used. diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject deleted file mode 100644 index 39a4a35..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project deleted file mode 100644 index 817c72f..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - RT-Win32-Simulator - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/simulator - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile deleted file mode 100644 index 0164f13..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile +++ /dev/null @@ -1,151 +0,0 @@ -# -# !!!! Do NOT edit this makefile with an editor which replace tabs by spaces !!!! -# -############################################################################################## -# -# On command line: -# -# make all = Create project -# -# make clean = Clean project files. -# -# To rebuild project do "make clean" and "make all". -# - -############################################################################################## -# Start of default section -# - -TRGT = mingw32- -CC = $(TRGT)gcc -AS = $(TRGT)gcc -x assembler-with-cpp - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DSIMULATOR - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = -lws2_32 - -# -# End of default section -############################################################################################## - -############################################################################################## -# Start of user section -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT = - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/boards/simulator/board.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/simulator/win32/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/ports/SIMIA32/compilers/GCC/port.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/test/rt/test.mk - -# List C source files here -SRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ - $(CHIBIOS)/os/hal/lib/streams/chprintf.c \ - main.c - -# List ASM source files here -ASRC = - -# List all user directories here -UINCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# Define optimisation level here -OPT = -ggdb -O2 - -# -# End of user defines -############################################################################################## - -INCDIR = $(patsubst %,-I%,$(DINCDIR) $(UINCDIR)) -LIBDIR = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR)) -DEFS = $(DDEFS) $(UDEFS) -ADEFS = $(DADEFS) $(UADEFS) -OBJS = $(ASRC:.s=.o) $(SRC:.c=.o) -LIBS = $(DLIBS) $(ULIBS) - -LDFLAGS = -Wl,-Map=$(PROJECT).map,--cref,--no-warn-mismatch $(LIBDIR) -ASFLAGS = -Wa,-amhls=$(<:.s=.lst) $(ADEFS) -CPFLAGS = -Wall -Wextra -Wundef -Wstrict-prototypes -fverbose-asm -Wa,-alms=$(<:.c=.lst) $(DEFS) - -# Generate dependency information -CPFLAGS += -MD -MP -MF .dep/$(@F).d - -# -# makefile rules -# - -all: $(OBJS) $(PROJECT).exe - -%.o : %.c - $(CC) -c $(OPT) $(CPFLAGS) -I . $(INCDIR) $< -o $@ - -%.o : %.s - $(AS) -c $(OPT) $(ASFLAGS) $< -o $@ - -%exe: $(OBJS) - $(CC) $(OPT) $(OBJS) $(LDFLAGS) $(LIBS) -o $@ - -gcov: - -mkdir gcov - $(COV) -u $(subst /,\,$(SRC)) - -mv *.gcov ./gcov - -clean: - -rm -f $(OBJS) - -rm -f $(PROJECT).exe - -rm -f $(PROJECT).map - -rm -f $(SRC:.c=.c.bak) - -rm -f $(SRC:.c=.lst) - -rm -f $(ASRC:.s=.s.bak) - -rm -f $(ASRC:.s=.lst) - -rm -fR .dep - -# -# Include the dependency files, should be the last of the makefile -# --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - -# *** EOF *** diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h deleted file mode 100644 index aa9154f..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0x20000 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h deleted file mode 100644 index 70ba5bf..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h +++ /dev/null @@ -1,365 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -/*#include "mcuconf.h"*/ - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 32 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c deleted file mode 100644 index 6540693..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "test.h" -#include "shell.h" -#include "chprintf.h" - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(4096) -#define CONSOLE_WA_SIZE THD_WORKING_AREA_SIZE(4096) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(4096) - -#define cputs(msg) chMsgSend(cdtp, (msg_t)msg) - -static thread_t *cdtp; -static thread_t *shelltp1; -static thread_t *shelltp2; - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.esp, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD1, - commands -}; - -static const ShellConfig shell_cfg2 = { - (BaseSequentialStream *)&SD2, - commands -}; - -/* - * Console print server done using synchronous messages. This makes the access - * to the C printf() thread safe and the print operation atomic among threads. - * In this example the message is the zero terminated string itself. - */ -static THD_FUNCTION(console_thread, arg) { - - (void)arg; - while (!chThdShouldTerminateX()) { - thread_t *tp = chMsgWait(); - puts((char *)chMsgGet(tp)); - fflush(stdout); - chMsgRelease(tp, MSG_OK); - } -} - -/** - * @brief Shell termination handler. - * - * @param[in] id event id. - */ -static void termination_handler(eventid_t id) { - - (void)id; - if (shelltp1 && chThdTerminatedX(shelltp1)) { - chThdWait(shelltp1); - shelltp1 = NULL; - chThdSleepMilliseconds(10); - cputs("Init: shell on SD1 terminated"); - chSysLock(); - chOQResetI(&SD1.oqueue); - chSysUnlock(); - } - if (shelltp2 && chThdTerminatedX(shelltp2)) { - chThdWait(shelltp2); - shelltp2 = NULL; - chThdSleepMilliseconds(10); - cputs("Init: shell on SD2 terminated"); - chSysLock(); - chOQResetI(&SD2.oqueue); - chSysUnlock(); - } -} - -static event_listener_t sd1fel, sd2fel; - -/** - * @brief SD1 status change handler. - * - * @param[in] id event id. - */ -static void sd1_handler(eventid_t id) { - eventflags_t flags; - - (void)id; - flags = chEvtGetAndClearFlags(&sd1fel); - if ((flags & CHN_CONNECTED) && (shelltp1 == NULL)) { - cputs("Init: connection on SD1"); - shelltp1 = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO + 1); - } - if (flags & CHN_DISCONNECTED) { - cputs("Init: disconnection on SD1"); - chSysLock(); - chIQResetI(&SD1.iqueue); - chSysUnlock(); - } -} - -/** - * @brief SD2 status change handler. - * - * @param[in] id event id. - */ -static void sd2_handler(eventid_t id) { - eventflags_t flags; - - (void)id; - flags = chEvtGetAndClearFlags(&sd2fel); - if ((flags & CHN_CONNECTED) && (shelltp2 == NULL)) { - cputs("Init: connection on SD2"); - shelltp2 = shellCreate(&shell_cfg2, SHELL_WA_SIZE, NORMALPRIO + 10); - } - if (flags & CHN_DISCONNECTED) { - cputs("Init: disconnection on SD2"); - chSysLock(); - chIQResetI(&SD2.iqueue); - chSysUnlock(); - } -} - -static evhandler_t fhandlers[] = { - termination_handler, - sd1_handler, - sd2_handler -}; - -/*------------------------------------------------------------------------* - * Simulator main. * - *------------------------------------------------------------------------*/ -int main(void) { - event_listener_t tel; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Serial ports (simulated) initialization. - */ - sdStart(&SD1, NULL); - sdStart(&SD2, NULL); - - /* - * Shell manager initialization. - */ - shellInit(); - chEvtRegister(&shell_terminated, &tel, 0); - - /* - * Console thread started. - */ - cdtp = chThdCreateFromHeap(NULL, CONSOLE_WA_SIZE, NORMALPRIO + 1, - console_thread, NULL); - - /* - * Initializing connection/disconnection events. - */ - cputs("Shell service started on SD1, SD2"); - cputs(" - Listening for connections on SD1"); - chEvtRegister(chnGetEventSource(&SD1), &sd1fel, 1); - cputs(" - Listening for connections on SD2"); - chEvtRegister(chnGetEventSource(&SD2), &sd2fel, 2); - - /* - * Events servicing loop. - */ - while (!chThdShouldTerminateX()) - chEvtDispatch(fhandlers, chEvtWaitOne(ALL_EVENTS)); - - /* - * Clean simulator exit. - */ - chEvtUnregister(chnGetEventSource(&SD1), &sd1fel); - chEvtUnregister(chnGetEventSource(&SD2), &sd2fel); - return 0; -} diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt deleted file mode 100644 index e72e2e0..0000000 --- a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt +++ /dev/null @@ -1,33 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for x86 into a Win32 process ** -***************************************************************************** - -** TARGET ** - -The demo runs under any Windows version as an application program. The serial -I/O is simulated over TCP/IP sockets. - -** The Demo ** - -The demo listens on the two serial ports, when a connection is detected a -thread is started that serves a small command shell. -The demo shows how to create/terminate threads at runtime, how to listen to -events, how to work with serial ports, how to use the messages. -You can develop your ChibiOS/RT application using this demo as a simulator -then you can recompile it for a different architecture. -See demo.c for details. - -** Build Procedure ** - -The demo was built using the MinGW toolchain. - -** Connect to the demo ** - -In order to connect to the demo a telnet client is required. A good choice -is PuTTY: - -http://www.putty.org/ - -Host Name: 127.0.0.1 -Port: 29001 and/or 29002 -Connection Type: Raw -- cgit v1.2.3