From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- .../testhal/STM32/STM32L1xx/ADC/.cproject | 52 --- .../testhal/STM32/STM32L1xx/ADC/.project | 38 -- .../testhal/STM32/STM32L1xx/ADC/Makefile | 216 --------- .../testhal/STM32/STM32L1xx/ADC/chconf.h | 499 --------------------- .../STM32L1xx-ADC (OpenOCD, Flash and Run).launch | 52 --- .../testhal/STM32/STM32L1xx/ADC/halconf.h | 381 ---------------- ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/main.c | 164 ------- .../testhal/STM32/STM32L1xx/ADC/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/ADC/readme.txt | 31 -- .../testhal/STM32/STM32L1xx/DAC/.cproject | 52 --- .../testhal/STM32/STM32L1xx/DAC/.project | 38 -- .../testhal/STM32/STM32L1xx/DAC/Makefile | 216 --------- .../testhal/STM32/STM32L1xx/DAC/chconf.h | 499 --------------------- .../STM32L1xx-DAC (OpenOCD, Flash and Run).launch | 52 --- .../testhal/STM32/STM32L1xx/DAC/halconf.h | 381 ---------------- ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/main.c | 157 ------- .../testhal/STM32/STM32L1xx/DAC/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/DAC/readme.txt | 30 -- .../testhal/STM32/STM32L1xx/EXT/.cproject | 52 --- .../testhal/STM32/STM32L1xx/EXT/.project | 38 -- .../testhal/STM32/STM32L1xx/EXT/Makefile | 216 --------- .../testhal/STM32/STM32L1xx/EXT/chconf.h | 499 --------------------- .../testhal/STM32/STM32L1xx/EXT/halconf.h | 388 ---------------- ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/main.c | 98 ---- .../testhal/STM32/STM32L1xx/EXT/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/EXT/readme.txt | 30 -- .../testhal/STM32/STM32L1xx/IRQ_STORM/.cproject | 50 --- .../testhal/STM32/STM32L1xx/IRQ_STORM/.project | 43 -- .../testhal/STM32/STM32L1xx/IRQ_STORM/Makefile | 221 --------- .../testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h | 499 --------------------- ...2L1xx-IRQ_STORM (OpenOCD, Flash and Run).launch | 52 --- .../testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h | 388 ---------------- .../testhal/STM32/STM32L1xx/IRQ_STORM/main.c | 83 ---- .../testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt | 31 -- .../testhal/STM32/STM32L1xx/PWM-ICU/.cproject | 52 --- .../testhal/STM32/STM32L1xx/PWM-ICU/.project | 38 -- .../testhal/STM32/STM32L1xx/PWM-ICU/Makefile | 216 --------- .../testhal/STM32/STM32L1xx/PWM-ICU/chconf.h | 499 --------------------- .../testhal/STM32/STM32L1xx/PWM-ICU/halconf.h | 388 ---------------- .../testhal/STM32/STM32L1xx/PWM-ICU/main.c | 143 ------ .../testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/PWM-ICU/readme.txt | 31 -- .../testhal/STM32/STM32L1xx/SPI/.cproject | 52 --- .../testhal/STM32/STM32L1xx/SPI/.project | 38 -- .../testhal/STM32/STM32L1xx/SPI/Makefile | 216 --------- .../testhal/STM32/STM32L1xx/SPI/chconf.h | 499 --------------------- .../testhal/STM32/STM32L1xx/SPI/halconf.h | 388 ---------------- ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/main.c | 137 ------ .../testhal/STM32/STM32L1xx/SPI/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/SPI/readme.txt | 31 -- .../testhal/STM32/STM32L1xx/UART/.cproject | 52 --- .../testhal/STM32/STM32L1xx/UART/.project | 38 -- .../testhal/STM32/STM32L1xx/UART/Makefile | 216 --------- .../testhal/STM32/STM32L1xx/UART/chconf.h | 499 --------------------- .../testhal/STM32/STM32L1xx/UART/halconf.h | 388 ---------------- ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/main.c | 142 ------ .../testhal/STM32/STM32L1xx/UART/mcuconf.h | 206 --------- .../testhal/STM32/STM32L1xx/UART/readme.txt | 32 -- 59 files changed, 11083 deletions(-) delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/debug/STM32L1xx-ADC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/readme.txt delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/debug/STM32L1xx-DAC (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/readme.txt delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/readme.txt delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/debug/STM32L1xx-IRQ_STORM (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/readme.txt delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.cproject delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.project delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/Makefile delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/chconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/halconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/main.c delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/mcuconf.h delete mode 100644 ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/readme.txt (limited to 'ChibiOS_16.1.5/testhal/STM32/STM32L1xx') diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.cproject deleted file mode 100644 index f14a121..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.project deleted file mode 100644 index 26bb585..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/Makefile deleted file mode 100644 index c86ba51..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/chconf.h deleted file mode 100644 index 7a264d6..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/debug/STM32L1xx-ADC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/debug/STM32L1xx-ADC (OpenOCD, Flash and Run).launch deleted file mode 100644 index dbd12df..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/debug/STM32L1xx-ADC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/halconf.h deleted file mode 100644 index f8b4e8c..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/main.c deleted file mode 100644 index 9ca096a..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/main.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* SMPR1 */ - ADC_SMPR2_SMP_AN10(ADC_SAMPLE_4), - 0, /* SMPR3 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, 0, 0, /* SQR2, SQR3, SQR4 */ - ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* SMPR1 */ - ADC_SMPR2_SMP_AN11(ADC_SAMPLE_48) | ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) | - ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192) | ADC_SMPR2_SMP_VREF(ADC_SAMPLE_192), - 0, /* SMPR3 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - 0, 0, /* SQR2, SQR3 */ - ADC_SQR4_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR4_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR5_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ5_N(ADC_CHANNEL_IN10) | - ADC_SQR5_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ3_N(ADC_CHANNEL_IN10) | - ADC_SQR5_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (true) { - palSetPad(GPIOB, GPIOB_LED4); - chThdSleepMilliseconds(500); - palClearPad(GPIOB, GPIOB_LED4); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32DisableTSVREFE(); - } - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/mcuconf.h deleted file mode 100644 index ea8f241..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/readme.txt deleted file mode 100644 index 0e6765a..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - ADC driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx ADC driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PC0 to 3.3V and PC1 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.cproject deleted file mode 100644 index 6c2a564..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.project deleted file mode 100644 index 9a0c681..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-DAC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/Makefile deleted file mode 100644 index c8f37c8..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/chconf.h deleted file mode 100644 index 7a264d6..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/debug/STM32L1xx-DAC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/debug/STM32L1xx-DAC (OpenOCD, Flash and Run).launch deleted file mode 100644 index 8890f21..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/debug/STM32L1xx-DAC (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/halconf.h deleted file mode 100644 index 0f6406a..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/halconf.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/main.c deleted file mode 100644 index beb04e5..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/main.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define DAC_BUFFER_SIZE 360 - -/* - * DAC test buffer (sine wave). - */ -static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = { - 2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437, - 2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846, - 2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221, - 3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544, - 3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801, - 3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982, - 3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078, - 4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086, - 4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004, - 3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837, - 3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591, - 3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278, - 3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912, - 2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507, - 2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082, - 2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657, - 1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248, - 1215, 1182, 1150, 1118, 1086, 1055, 1024, 993, 963, 933, 903, 873, - 844, 816, 787, 759, 732, 705, 678, 651, 626, 600, 575, 550, - 526, 503, 479, 457, 434, 413, 391, 371, 350, 331, 312, 293, - 275, 257, 240, 224, 208, 192, 177, 163, 150, 136, 124, 112, - 101, 90, 80, 70, 61, 53, 45, 38, 32, 26, 20, 16, - 12, 8, 5, 3, 2, 1, 0, 1, 2, 3, 5, 8, - 12, 16, 20, 26, 32, 38, 45, 53, 61, 70, 80, 90, - 101, 112, 124, 136, 150, 163, 177, 192, 208, 224, 240, 257, - 275, 293, 312, 331, 350, 371, 391, 413, 434, 457, 479, 503, - 526, 550, 575, 600, 626, 651, 678, 705, 732, 759, 787, 816, - 844, 873, 903, 933, 963, 993, 1024, 1055, 1086, 1118, 1150, 1182, - 1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587, - 1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012 -}; - -/* - * DAC streaming callback. - */ -size_t nx = 0, ny = 0, nz = 0; -static void end_cb1(DACDriver *dacp, const dacsample_t *buffer, size_t n) { - - (void)dacp; - - nz++; - if (dac_buffer == buffer) { - nx += n; - } - else { - ny += n; - } - - if ((nz % 1000) == 0) { - palTogglePad(GPIOB, GPIOB_LED4); - } -} - -/* - * DAC error callback. - */ -static void error_cb1(DACDriver *dacp, dacerror_t err) { - - (void)dacp; - (void)err; - - chSysHalt("DAC failure"); -} - -static const DACConfig dac1cfg1 = { - .init = 2047U, - .datamode = DAC_DHRM_12BIT_RIGHT -}; - -static const DACConversionGroup dacgrpcfg1 = { - .num_channels = 1U, - .end_cb = end_cb1, - .error_cb = error_cb1, - .trigger = DAC_TRG(0) -}; - -/* - * GPT6 configuration. - */ -static const GPTConfig gpt6cfg1 = { - .frequency = 1000000U, - .callback = NULL, - .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ - .dier = 0U -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Starting DAC1 driver, setting up the output pin as analog as suggested - * by the Reference Manual. - */ - palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG); - dacStart(&DACD1, &dac1cfg1); - - /* - * Starting GPT6 driver, it is used for triggering the DAC. - */ - gptStart(&GPTD6, &gpt6cfg1); - - /* - * Starting a continuous conversion. - */ - dacStartConversion(&DACD1, &dacgrpcfg1, dac_buffer, DAC_BUFFER_SIZE); - gptStartContinuous(&GPTD6, 2U); - - /* - * Normal main() thread activity, if the button is pressed then the DAC - * transfer is stopped. - */ - while (true) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - gptStopTimer(&GPTD6); - dacStopConversion(&DACD1); - } - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/mcuconf.h deleted file mode 100644 index a923965..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/readme.txt deleted file mode 100644 index 1a4cb3c..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/DAC/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - DAC driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx DAC driver. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.cproject deleted file mode 100644 index 0e25eaf..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.project deleted file mode 100644 index 9b70efe..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/Makefile deleted file mode 100644 index c86ba51..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/chconf.h deleted file mode 100644 index 7a264d6..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/halconf.h deleted file mode 100644 index 72feead..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/main.c deleted file mode 100644 index 26ea035..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTDoSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/mcuconf.h deleted file mode 100644 index fc8755b..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/readme.txt deleted file mode 100644 index 432ddbd..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject deleted file mode 100644 index a75fb8d..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.project deleted file mode 100644 index ecf468f..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32L1xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - common - 2 - CHIBIOS/testhal/common - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile deleted file mode 100644 index f77fa65..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(CHIBIOS)/os/hal/lib/streams/memstreams.c \ - $(CHIBIOS)/os/hal/lib/streams/chprintf.c \ - $(CHIBIOS)/testhal/common/irq_storm.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/hal/lib/streams \ - $(CHIBIOS)/os/various \ - $(CHIBIOS)/testhal/common - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h deleted file mode 100644 index 8c745aa..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/debug/STM32L1xx-IRQ_STORM (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/debug/STM32L1xx-IRQ_STORM (OpenOCD, Flash and Run).launch deleted file mode 100644 index 564bedf..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/debug/STM32L1xx-IRQ_STORM (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h deleted file mode 100644 index 1132e12..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/main.c deleted file mode 100644 index a4b843c..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/main.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "irq_storm.h" - -/* - * GPT4 configuration. - */ -static const GPTConfig gpt4cfg = { - 1000000, /* 1MHz timer clock.*/ - irq_storm_gpt1_cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - irq_storm_gpt2_cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * IRQ Storm configuration. - */ -static const irq_storm_config_t irq_storm_config = { - (BaseSequentialStream *)&SD1, - GPIOB, - GPIOB_LED4, - &GPTD4, - &GPTD3, - &gpt4cfg, - &gpt3cfg, - STM32_SYSCLK -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* Prepares the Serial driver 1.*/ - sdStart(&SD1, NULL); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ - - /* Running the test.*/ - irq_storm_execute(&irq_storm_config); - - /* Normal main() thread activity, nothing in this test.*/ - while (true) { - chThdSleepMilliseconds(5000); - } -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 05a6306..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 6 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt deleted file mode 100644 index 2c121fc..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - IRQ_STORM stress test demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.cproject deleted file mode 100644 index 077ea25..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.project deleted file mode 100644 index 04ec07c..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/Makefile deleted file mode 100644 index c86ba51..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h deleted file mode 100644 index 7a264d6..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h deleted file mode 100644 index d831473..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/main.c deleted file mode 100644 index 610b909..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/main.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOB, GPIOB_LED4); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOB, GPIOB_LED4); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0 -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOB, GPIOB_LED3); - last_width = icuGetWidthX(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOB, GPIOB_LED3); - last_period = icuGetPeriodX(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA15 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD2, &pwmcfg); - pwmEnablePeriodicNotification(&PWMD2); - palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(1)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuStartCapture(&ICUD3); - icuEnableNotifications(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); - pwmEnableChannelNotification(&PWMD2, 0); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD2, 0); - pwmStop(&PWMD2); - icuStopCapture(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOB, GPIOB_LED3); - palClearPad(GPIOB, GPIOB_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h deleted file mode 100644 index 0ee4712..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 4 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt deleted file mode 100644 index c88c0a9..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - PWM-ICU drivers demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx PWM-ICU drivers. - -** Board Setup ** - -- Remove the LCD module. -- Connect PA15 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.cproject deleted file mode 100644 index 91d9d60..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.project deleted file mode 100644 index c4b9903..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/Makefile deleted file mode 100644 index c86ba51..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/chconf.h deleted file mode 100644 index 7a264d6..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/halconf.h deleted file mode 100644 index 81a4e30..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/main.c deleted file mode 100644 index 287597d..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/main.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (16MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -/* - * Low speed SPI configuration (256kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static THD_FUNCTION(spi_thread_1, p) { - - (void)p; - - chRegSetThreadName("SPI thread 1"); - while (true) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOB, GPIOB_LED4); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static THD_FUNCTION(spi_thread_2, p) { - - (void)p; - - chRegSetThreadName("SPI thread 2"); - while (true) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOB, GPIOB_LED4); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI1 I/O pins setup. - */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* NSS. */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5)); /* MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* MOSI. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/mcuconf.h deleted file mode 100644 index 397b93d..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/readme.txt deleted file mode 100644 index 435878f..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/SPI/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - SPI driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx SPI driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.cproject b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.cproject deleted file mode 100644 index 5c340da..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.project b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.project deleted file mode 100644 index 2ee1d74..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/Makefile b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/Makefile deleted file mode 100644 index c86ba51..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/chconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/chconf.h deleted file mode 100644 index 7a264d6..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/chconf.h +++ /dev/null @@ -1,499 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/halconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/halconf.h deleted file mode 100644 index cc55e71..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/main.c deleted file mode 100644 index 04b40d7..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromISR(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromISR(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOB, GPIOB_LED4); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt1); - chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt2); - chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (true) { - chThdSleepMilliseconds(500); - } -} diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/mcuconf.h b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/mcuconf.h deleted file mode 100644 index dc284b3..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/readme.txt b/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/readme.txt deleted file mode 100644 index b50405c..0000000 --- a/ChibiOS_16.1.5/testhal/STM32/STM32L1xx/UART/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - UART driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx UART driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com -- cgit v1.2.3