You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

117 lines
3.8 KiB
Plaintext

/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32L476xG memory setup.
* A total of 1MB of flash is available.
* Firmware uses first 510K, then 2K after is used for unprivileged code.
* A total of 128K of RAM is available.
* SRAM2 (32K) is used for ELF binary loading.
* 32K of SRAM1 is used for system RAM.
* 48K is used for ADC and DAC buffers.
* 16K is used for unprivileged data (incl. 8K stack).
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 510K /* Flash bank 1 (reduced from 1M to 510K) */
flash1 (rx) : org = 0x00000000, len = 0
flash2 (rx) : org = 0x00000000, len = 0
flash3 (rx) : org = 0x00000000, len = 0
flash4 (rx) : org = 0x00000000, len = 0
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 32K /* SRAM (actual total = 96K) */
ram1 (wx) : org = 0x20008000, len = 48K /* ADC/DAC buffers (16K * 3) */
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x10000000, len = 32K /* User algorithm */
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
flashc (rx) : org = 0x0807F800, len = 2K /* Unprivileged firmware */
ramc (wx) : org = 0x20014000, len = 16K /* Unprivileged data */
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
SECTIONS
{
.convdata : ALIGN(4)
{
*(.convdata)
. = ALIGN(4);
} > ramc
/*.stacks : ALIGN(4)
{
*(.stacks)
. = ALIGN(4);
} > ram5*/
.convcode : ALIGN(4)
{
*(.convcode)
. = ALIGN(4);
} > flashc
}
/* Generic rules inclusion.*/
INCLUDE rules.ld