aboutsummaryrefslogtreecommitdiffstats
path: root/gtest-1.6.0/build-aux/missing
diff options
context:
space:
mode:
Diffstat (limited to 'gtest-1.6.0/build-aux/missing')
-rwxr-xr-xgtest-1.6.0/build-aux/missing752
1 files changed, 376 insertions, 376 deletions
diff --git a/gtest-1.6.0/build-aux/missing b/gtest-1.6.0/build-aux/missing
index 23c9d2e..28055d2 100755
--- a/gtest-1.6.0/build-aux/missing
+++ b/gtest-1.6.0/build-aux/missing
@@ -1,376 +1,376 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar*)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar*)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar*)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar*)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-12 00:30:25 +0000