diff options
| author | tcsullivan <tullivan99@gmail.com> | 2019-03-10 15:37:07 -0400 |
|---|---|---|
| committer | tcsullivan <tullivan99@gmail.com> | 2019-03-10 15:37:07 -0400 |
| commit | dd33956654589ded6644a75088e50069b1744ef9 (patch) | |
| tree | eddd51f1aac130f6c7082a2de53b8e46f0387187 /drivers_nrf/sdk_config.h | |
| parent | 3c3f87b4cab153b49e3cde105dd2f34712e0b790 (diff) | |
rtc, keeping time
Diffstat (limited to 'drivers_nrf/sdk_config.h')
| -rw-r--r-- | drivers_nrf/sdk_config.h | 6583 |
1 files changed, 6583 insertions, 0 deletions
diff --git a/drivers_nrf/sdk_config.h b/drivers_nrf/sdk_config.h new file mode 100644 index 0000000..470126f --- /dev/null +++ b/drivers_nrf/sdk_config.h @@ -0,0 +1,6583 @@ +/** + * Copyright (c) 2017 - 2017, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif + +#define NRF_BLE_GATT_MAX_MTU_SIZE BLE_GATT_ATT_MTU_DEFAULT*12 +// <h> nRF_ANT + +//========================================================== +// <e> ANTFS_ENABLED - ant_fs - ANT File Share module. +//========================================================== +#ifndef ANTFS_ENABLED +#define ANTFS_ENABLED 0 +#endif +#if ANTFS_ENABLED +// <o> ANTFS_CONFIG_NETWORK_NUMBER - ANT-FS network number. +#ifndef ANTFS_CONFIG_NETWORK_NUMBER +#define ANTFS_CONFIG_NETWORK_NUMBER 0 +#endif + +// <o> ANTFS_CONFIG_CHANNEL_NUMBER - ANT-FS channel number. +#ifndef ANTFS_CONFIG_CHANNEL_NUMBER +#define ANTFS_CONFIG_CHANNEL_NUMBER 0 +#endif + +// <o> ANTFS_CONFIG_PAIRING_TIMEOUT - Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds. +#ifndef ANTFS_CONFIG_PAIRING_TIMEOUT +#define ANTFS_CONFIG_PAIRING_TIMEOUT 120 +#endif + +// <o> ANTFS_CONFIG_LINK_COMMAND_TIMEOUT - Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds. +#ifndef ANTFS_CONFIG_LINK_COMMAND_TIMEOUT +#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT 10 +#endif + +// <o> ANTFS_CONFIG_TRANS_TYPE - ANT-FS Transmission Type. +#ifndef ANTFS_CONFIG_TRANS_TYPE +#define ANTFS_CONFIG_TRANS_TYPE 10 +#endif + +// <o> ANTFS_CONFIG_DEVICE_TYPE - ANT device type for channel configuration. +#ifndef ANTFS_CONFIG_DEVICE_TYPE +#define ANTFS_CONFIG_DEVICE_TYPE 1 +#endif + +// <o> ANTFS_CONFIG_BEACON_STATUS_PERIOD - ANT-FS Beacon Message Period. + +// <0=> 0.5 Hz +// <1=> 1 Hz +// <2=> 2 Hz +// <3=> 4 Hz +// <4=> 8 Hz + +#ifndef ANTFS_CONFIG_BEACON_STATUS_PERIOD +#define ANTFS_CONFIG_BEACON_STATUS_PERIOD 3 +#endif + +// <o> ANTFS_CONFIG_TRANSMIT_POWER - ANT Transmit Power. + +// <0=> Lowest ANT Tx power level setting. (-20dBm) +// <1=> ANT Tx power > Lvl 0. (-12dBm) +// <2=> ANT Tx power > Lvl 1. (-4dBm) +// <3=> ANT Tx power > Lvl 2. Default tx power level. (0dBm) +// <4=> ANT Tx power > Lvl 3. (+4dBm) +// <128=> Custom tx power selection + +#ifndef ANTFS_CONFIG_TRANSMIT_POWER +#define ANTFS_CONFIG_TRANSMIT_POWER 3 +#endif + +// <o> ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER - ANT Custom Transmit Power. +#ifndef ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER +#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER 0 +#endif + +// <q> ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED - Use pairing and key exchange authentication. + + +#ifndef ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED +#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED 0 +#endif + +// <q> ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED - Use passkey authentication. + + +#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED +#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED 0 +#endif + +// <q> ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED - Allow host to bypass authentication. + + +#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED +#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED 0 +#endif + +// <q> ANTFS_CONFIG_UPLOAD_ENABLED - Support upload operation. + + +#ifndef ANTFS_CONFIG_UPLOAD_ENABLED +#define ANTFS_CONFIG_UPLOAD_ENABLED 0 +#endif + +// <q> ANTFS_CONFIG_DEBUG_LED_ENABLED - Enables LED debug in the module. + + +#ifndef ANTFS_CONFIG_DEBUG_LED_ENABLED +#define ANTFS_CONFIG_DEBUG_LED_ENABLED 0 +#endif + +#endif //ANTFS_ENABLED +// </e> + +// <e> ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile +//========================================================== +#ifndef ANT_BPWR_ENABLED +#define ANT_BPWR_ENABLED 0 +#endif +#if ANT_BPWR_ENABLED +// <e> ANT_BPWR_LOG_ENABLED - Enables general logging in the module. +//========================================================== +#ifndef ANT_BPWR_LOG_ENABLED +#define ANT_BPWR_LOG_ENABLED 0 +#endif +#if ANT_BPWR_LOG_ENABLED +// <o> ANT_BPWR_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_LOG_LEVEL +#define ANT_BPWR_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_INFO_COLOR +#define ANT_BPWR_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_LOG_ENABLED +// </e> + +// <e> ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data. +//========================================================== +#ifndef ANT_BPWR_COMMON_LOG_ENABLED +#define ANT_BPWR_COMMON_LOG_ENABLED 0 +#endif +#if ANT_BPWR_COMMON_LOG_ENABLED +// <o> ANT_BPWR_COMMON_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_COMMON_LOG_LEVEL +#define ANT_BPWR_COMMON_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_COMMON_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_COMMON_INFO_COLOR +#define ANT_BPWR_COMMON_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_COMMON_LOG_ENABLED +// </e> + +// <e> ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module. +//========================================================== +#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED +#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 0 +#endif +#if ANT_BPWR_PAGE_TORQUE_LOG_ENABLED +// <o> ANT_BPWR_PAGE_TORQUE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL +#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_PAGE_TORQUE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR +#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_PAGE_TORQUE_LOG_ENABLED +// </e> + +// <e> ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module. +//========================================================== +#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED +#define ANT_BPWR_PAGE_1_LOG_ENABLED 0 +#endif +#if ANT_BPWR_PAGE_1_LOG_ENABLED +// <o> ANT_BPWR_PAGE_1_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL +#define ANT_BPWR_PAGE_1_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_PAGE_1_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_PAGE_1_INFO_COLOR +#define ANT_BPWR_PAGE_1_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_PAGE_1_LOG_ENABLED +// </e> + +// <e> ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module. +//========================================================== +#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED +#define ANT_BPWR_PAGE_16_LOG_ENABLED 0 +#endif +#if ANT_BPWR_PAGE_16_LOG_ENABLED +// <o> ANT_BPWR_PAGE_16_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL +#define ANT_BPWR_PAGE_16_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_PAGE_16_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_PAGE_16_INFO_COLOR +#define ANT_BPWR_PAGE_16_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_PAGE_16_LOG_ENABLED +// </e> + +// <e> ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module. +//========================================================== +#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED +#define ANT_BPWR_PAGE_17_LOG_ENABLED 0 +#endif +#if ANT_BPWR_PAGE_17_LOG_ENABLED +// <o> ANT_BPWR_PAGE_17_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL +#define ANT_BPWR_PAGE_17_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_PAGE_17_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_PAGE_17_INFO_COLOR +#define ANT_BPWR_PAGE_17_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_PAGE_17_LOG_ENABLED +// </e> + +// <e> ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module. +//========================================================== +#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED +#define ANT_BPWR_PAGE_18_LOG_ENABLED 0 +#endif +#if ANT_BPWR_PAGE_18_LOG_ENABLED +// <o> ANT_BPWR_PAGE_18_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL +#define ANT_BPWR_PAGE_18_LOG_LEVEL 3 +#endif + +// <o> ANT_BPWR_PAGE_18_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BPWR_PAGE_18_INFO_COLOR +#define ANT_BPWR_PAGE_18_INFO_COLOR 0 +#endif + +#endif //ANT_BPWR_PAGE_18_LOG_ENABLED +// </e> + +#endif //ANT_BPWR_ENABLED +// </e> + +// <e> ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile +//========================================================== +#ifndef ANT_BSC_ENABLED +#define ANT_BSC_ENABLED 0 +#endif +#if ANT_BSC_ENABLED +// <e> ANT_BSC_LOG_ENABLED - Enables general logging in the module. +//========================================================== +#ifndef ANT_BSC_LOG_ENABLED +#define ANT_BSC_LOG_ENABLED 0 +#endif +#if ANT_BSC_LOG_ENABLED +// <o> ANT_BSC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_LOG_LEVEL +#define ANT_BSC_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_INFO_COLOR +#define ANT_BSC_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_LOG_ENABLED +// </e> + +// <e> ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module. +//========================================================== +#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED +#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 0 +#endif +#if ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED +// <o> ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL +#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_COMBINED_PAGE_0_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR +#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED +// </e> + +// <e> ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module. +//========================================================== +#ifndef ANT_BSC_PAGE_0_LOG_ENABLED +#define ANT_BSC_PAGE_0_LOG_ENABLED 0 +#endif +#if ANT_BSC_PAGE_0_LOG_ENABLED +// <o> ANT_BSC_PAGE_0_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_PAGE_0_LOG_LEVEL +#define ANT_BSC_PAGE_0_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_PAGE_0_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_PAGE_0_INFO_COLOR +#define ANT_BSC_PAGE_0_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_PAGE_0_LOG_ENABLED +// </e> + +// <e> ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module. +//========================================================== +#ifndef ANT_BSC_PAGE_1_LOG_ENABLED +#define ANT_BSC_PAGE_1_LOG_ENABLED 0 +#endif +#if ANT_BSC_PAGE_1_LOG_ENABLED +// <o> ANT_BSC_PAGE_1_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_PAGE_1_LOG_LEVEL +#define ANT_BSC_PAGE_1_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_PAGE_1_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_PAGE_1_INFO_COLOR +#define ANT_BSC_PAGE_1_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_PAGE_1_LOG_ENABLED +// </e> + +// <e> ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module. +//========================================================== +#ifndef ANT_BSC_PAGE_2_LOG_ENABLED +#define ANT_BSC_PAGE_2_LOG_ENABLED 0 +#endif +#if ANT_BSC_PAGE_2_LOG_ENABLED +// <o> ANT_BSC_PAGE_2_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_PAGE_2_LOG_LEVEL +#define ANT_BSC_PAGE_2_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_PAGE_2_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_PAGE_2_INFO_COLOR +#define ANT_BSC_PAGE_2_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_PAGE_2_LOG_ENABLED +// </e> + +// <e> ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module. +//========================================================== +#ifndef ANT_BSC_PAGE_3_LOG_ENABLED +#define ANT_BSC_PAGE_3_LOG_ENABLED 0 +#endif +#if ANT_BSC_PAGE_3_LOG_ENABLED +// <o> ANT_BSC_PAGE_3_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_PAGE_3_LOG_LEVEL +#define ANT_BSC_PAGE_3_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_PAGE_3_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_PAGE_3_INFO_COLOR +#define ANT_BSC_PAGE_3_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_PAGE_3_LOG_ENABLED +// </e> + +// <e> ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module. +//========================================================== +#ifndef ANT_BSC_PAGE_4_LOG_ENABLED +#define ANT_BSC_PAGE_4_LOG_ENABLED 0 +#endif +#if ANT_BSC_PAGE_4_LOG_ENABLED +// <o> ANT_BSC_PAGE_4_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_PAGE_4_LOG_LEVEL +#define ANT_BSC_PAGE_4_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_PAGE_4_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_PAGE_4_INFO_COLOR +#define ANT_BSC_PAGE_4_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_PAGE_4_LOG_ENABLED +// </e> + +// <e> ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module. +//========================================================== +#ifndef ANT_BSC_PAGE_5_LOG_ENABLED +#define ANT_BSC_PAGE_5_LOG_ENABLED 0 +#endif +#if ANT_BSC_PAGE_5_LOG_ENABLED +// <o> ANT_BSC_PAGE_5_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_BSC_PAGE_5_LOG_LEVEL +#define ANT_BSC_PAGE_5_LOG_LEVEL 3 +#endif + +// <o> ANT_BSC_PAGE_5_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_BSC_PAGE_5_INFO_COLOR +#define ANT_BSC_PAGE_5_INFO_COLOR 0 +#endif + +#endif //ANT_BSC_PAGE_5_LOG_ENABLED +// </e> + +#endif //ANT_BSC_ENABLED +// </e> + +// <q> ANT_CHANNEL_CONFIG_ENABLED - ant_channel_config - ANT common channel configuration + + +#ifndef ANT_CHANNEL_CONFIG_ENABLED +#define ANT_CHANNEL_CONFIG_ENABLED 0 +#endif + +// <e> ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70 +//========================================================== +#ifndef ANT_COMMON_PAGE_70_ENABLED +#define ANT_COMMON_PAGE_70_ENABLED 0 +#endif +#if ANT_COMMON_PAGE_70_ENABLED +// <e> ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module. +//========================================================== +#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED +#define ANT_COMMON_PAGE_70_LOG_ENABLED 0 +#endif +#if ANT_COMMON_PAGE_70_LOG_ENABLED +// <o> ANT_COMMON_PAGE_70_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL +#define ANT_COMMON_PAGE_70_LOG_LEVEL 3 +#endif + +// <o> ANT_COMMON_PAGE_70_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_COMMON_PAGE_70_INFO_COLOR +#define ANT_COMMON_PAGE_70_INFO_COLOR 0 +#endif + +#endif //ANT_COMMON_PAGE_70_LOG_ENABLED +// </e> + +#endif //ANT_COMMON_PAGE_70_ENABLED +// </e> + +// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80 +//========================================================== +#ifndef ANT_COMMON_PAGE_80_ENABLED +#define ANT_COMMON_PAGE_80_ENABLED 0 +#endif +#if ANT_COMMON_PAGE_80_ENABLED +// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module. +//========================================================== +#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED +#define ANT_COMMON_PAGE_80_LOG_ENABLED 0 +#endif +#if ANT_COMMON_PAGE_80_LOG_ENABLED +// <o> ANT_COMMON_PAGE_80_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL +#define ANT_COMMON_PAGE_80_LOG_LEVEL 3 +#endif + +// <o> ANT_COMMON_PAGE_80_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_COMMON_PAGE_80_INFO_COLOR +#define ANT_COMMON_PAGE_80_INFO_COLOR 0 +#endif + +#endif //ANT_COMMON_PAGE_80_LOG_ENABLED +// </e> + +#endif //ANT_COMMON_PAGE_80_ENABLED +// </e> + +// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81 +//========================================================== +#ifndef ANT_COMMON_PAGE_81_ENABLED +#define ANT_COMMON_PAGE_81_ENABLED 0 +#endif +#if ANT_COMMON_PAGE_81_ENABLED +// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module. +//========================================================== +#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED +#define ANT_COMMON_PAGE_81_LOG_ENABLED 0 +#endif +#if ANT_COMMON_PAGE_81_LOG_ENABLED +// <o> ANT_COMMON_PAGE_81_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL +#define ANT_COMMON_PAGE_81_LOG_LEVEL 3 +#endif + +// <o> ANT_COMMON_PAGE_81_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_COMMON_PAGE_81_INFO_COLOR +#define ANT_COMMON_PAGE_81_INFO_COLOR 0 +#endif + +#endif //ANT_COMMON_PAGE_81_LOG_ENABLED +// </e> + +#endif //ANT_COMMON_PAGE_81_ENABLED +// </e> + +// <q> ANT_ENCRYPT_CONFIG_ENABLED - ant_encrypt_config - Cryptographic ANT stack configuration + + +#ifndef ANT_ENCRYPT_CONFIG_ENABLED +#define ANT_ENCRYPT_CONFIG_ENABLED 0 +#endif + +// <q> ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED - ant_encrypt_negotiation_slave - Encryption negotiation for encrypted ANT slave channels + + +#ifndef ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED +#define ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED 0 +#endif + +// <e> ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile +//========================================================== +#ifndef ANT_HRM_ENABLED +#define ANT_HRM_ENABLED 0 +#endif +#if ANT_HRM_ENABLED +// <e> ANT_HRM_LOG_ENABLED - Enables general logging in the module. +//========================================================== +#ifndef ANT_HRM_LOG_ENABLED +#define ANT_HRM_LOG_ENABLED 0 +#endif +#if ANT_HRM_LOG_ENABLED +// <o> ANT_HRM_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_HRM_LOG_LEVEL +#define ANT_HRM_LOG_LEVEL 3 +#endif + +// <o> ANT_HRM_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_HRM_INFO_COLOR +#define ANT_HRM_INFO_COLOR 0 +#endif + +#endif //ANT_HRM_LOG_ENABLED +// </e> + +// <e> ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module. +//========================================================== +#ifndef ANT_HRM_PAGE_0_LOG_ENABLED +#define ANT_HRM_PAGE_0_LOG_ENABLED 0 +#endif +#if ANT_HRM_PAGE_0_LOG_ENABLED +// <o> ANT_HRM_PAGE_0_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_HRM_PAGE_0_LOG_LEVEL +#define ANT_HRM_PAGE_0_LOG_LEVEL 3 +#endif + +// <o> ANT_HRM_PAGE_0_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_HRM_PAGE_0_INFO_COLOR +#define ANT_HRM_PAGE_0_INFO_COLOR 0 +#endif + +#endif //ANT_HRM_PAGE_0_LOG_ENABLED +// </e> + +// <e> ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module. +//========================================================== +#ifndef ANT_HRM_PAGE_1_LOG_ENABLED +#define ANT_HRM_PAGE_1_LOG_ENABLED 0 +#endif +#if ANT_HRM_PAGE_1_LOG_ENABLED +// <o> ANT_HRM_PAGE_1_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_HRM_PAGE_1_LOG_LEVEL +#define ANT_HRM_PAGE_1_LOG_LEVEL 3 +#endif + +// <o> ANT_HRM_PAGE_1_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_HRM_PAGE_1_INFO_COLOR +#define ANT_HRM_PAGE_1_INFO_COLOR 0 +#endif + +#endif //ANT_HRM_PAGE_1_LOG_ENABLED +// </e> + +// <e> ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module. +//========================================================== +#ifndef ANT_HRM_PAGE_2_LOG_ENABLED +#define ANT_HRM_PAGE_2_LOG_ENABLED 0 +#endif +#if ANT_HRM_PAGE_2_LOG_ENABLED +// <o> ANT_HRM_PAGE_2_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_HRM_PAGE_2_LOG_LEVEL +#define ANT_HRM_PAGE_2_LOG_LEVEL 3 +#endif + +// <o> ANT_HRM_PAGE_2_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_HRM_PAGE_2_INFO_COLOR +#define ANT_HRM_PAGE_2_INFO_COLOR 0 +#endif + +#endif //ANT_HRM_PAGE_2_LOG_ENABLED +// </e> + +// <e> ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module. +//========================================================== +#ifndef ANT_HRM_PAGE_3_LOG_ENABLED +#define ANT_HRM_PAGE_3_LOG_ENABLED 0 +#endif +#if ANT_HRM_PAGE_3_LOG_ENABLED +// <o> ANT_HRM_PAGE_3_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_HRM_PAGE_3_LOG_LEVEL +#define ANT_HRM_PAGE_3_LOG_LEVEL 3 +#endif + +// <o> ANT_HRM_PAGE_3_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_HRM_PAGE_3_INFO_COLOR +#define ANT_HRM_PAGE_3_INFO_COLOR 0 +#endif + +#endif //ANT_HRM_PAGE_3_LOG_ENABLED +// </e> + +// <e> ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module. +//========================================================== +#ifndef ANT_HRM_PAGE_4_LOG_ENABLED +#define ANT_HRM_PAGE_4_LOG_ENABLED 0 +#endif +#if ANT_HRM_PAGE_4_LOG_ENABLED +// <o> ANT_HRM_PAGE_4_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_HRM_PAGE_4_LOG_LEVEL +#define ANT_HRM_PAGE_4_LOG_LEVEL 3 +#endif + +// <o> ANT_HRM_PAGE_4_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_HRM_PAGE_4_INFO_COLOR +#define ANT_HRM_PAGE_4_INFO_COLOR 0 +#endif + +#endif //ANT_HRM_PAGE_4_LOG_ENABLED +// </e> + +#endif //ANT_HRM_ENABLED +// </e> + +// <q> ANT_KEY_MANAGER_ENABLED - ant_key_manager - Software Component + + +#ifndef ANT_KEY_MANAGER_ENABLED +#define ANT_KEY_MANAGER_ENABLED 0 +#endif + +// <q> ANT_REQUEST_CONTROLLER_ENABLED - ant_request_controller - ANT+ request controller + + +#ifndef ANT_REQUEST_CONTROLLER_ENABLED +#define ANT_REQUEST_CONTROLLER_ENABLED 0 +#endif + +// <e> ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile +//========================================================== +#ifndef ANT_SDM_ENABLED +#define ANT_SDM_ENABLED 0 +#endif +#if ANT_SDM_ENABLED +// <e> ANT_SDM_LOG_ENABLED - Enables general logging in the module. +//========================================================== +#ifndef ANT_SDM_LOG_ENABLED +#define ANT_SDM_LOG_ENABLED 0 +#endif +#if ANT_SDM_LOG_ENABLED +// <o> ANT_SDM_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_SDM_LOG_LEVEL +#define ANT_SDM_LOG_LEVEL 3 +#endif + +// <o> ANT_SDM_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_SDM_INFO_COLOR +#define ANT_SDM_INFO_COLOR 0 +#endif + +#endif //ANT_SDM_LOG_ENABLED +// </e> + +// <e> ANT_SDM_PAGE_1_LOG_ENABLED - Enables logging of SDM page 1 in the module. +//========================================================== +#ifndef ANT_SDM_PAGE_1_LOG_ENABLED +#define ANT_SDM_PAGE_1_LOG_ENABLED 0 +#endif +#if ANT_SDM_PAGE_1_LOG_ENABLED +// <o> ANT_SDM_PAGE_1_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_SDM_PAGE_1_LOG_LEVEL +#define ANT_SDM_PAGE_1_LOG_LEVEL 3 +#endif + +// <o> ANT_SDM_PAGE_1_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_SDM_PAGE_1_INFO_COLOR +#define ANT_SDM_PAGE_1_INFO_COLOR 0 +#endif + +#endif //ANT_SDM_PAGE_1_LOG_ENABLED +// </e> + +// <e> ANT_SDM_PAGE_2_LOG_ENABLED - Enables logging of SDM page 2 in the module. +//========================================================== +#ifndef ANT_SDM_PAGE_2_LOG_ENABLED +#define ANT_SDM_PAGE_2_LOG_ENABLED 0 +#endif +#if ANT_SDM_PAGE_2_LOG_ENABLED +// <o> ANT_SDM_PAGE_2_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_SDM_PAGE_2_LOG_LEVEL +#define ANT_SDM_PAGE_2_LOG_LEVEL 3 +#endif + +// <o> ANT_SDM_PAGE_2_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_SDM_PAGE_2_INFO_COLOR +#define ANT_SDM_PAGE_2_INFO_COLOR 0 +#endif + +#endif //ANT_SDM_PAGE_2_LOG_ENABLED +// </e> + +// <e> ANT_SDM_PAGE_3_LOG_ENABLED - Enables logging of SDM page 3 in the module. +//========================================================== +#ifndef ANT_SDM_PAGE_3_LOG_ENABLED +#define ANT_SDM_PAGE_3_LOG_ENABLED 0 +#endif +#if ANT_SDM_PAGE_3_LOG_ENABLED +// <o> ANT_SDM_PAGE_3_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_SDM_PAGE_3_LOG_LEVEL +#define ANT_SDM_PAGE_3_LOG_LEVEL 3 +#endif + +// <o> ANT_SDM_PAGE_3_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_SDM_PAGE_3_INFO_COLOR +#define ANT_SDM_PAGE_3_INFO_COLOR 0 +#endif + +#endif //ANT_SDM_PAGE_3_LOG_ENABLED +// </e> + +// <e> ANT_SDM_PAGE_16_LOG_ENABLED - Enables logging of SDM page 16 in the module. +//========================================================== +#ifndef ANT_SDM_PAGE_16_LOG_ENABLED +#define ANT_SDM_PAGE_16_LOG_ENABLED 0 +#endif +#if ANT_SDM_PAGE_16_LOG_ENABLED +// <o> ANT_SDM_PAGE_16_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_SDM_PAGE_16_LOG_LEVEL +#define ANT_SDM_PAGE_16_LOG_LEVEL 3 +#endif + +// <o> ANT_SDM_PAGE_16_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_SDM_PAGE_16_INFO_COLOR +#define ANT_SDM_PAGE_16_INFO_COLOR 0 +#endif + +#endif //ANT_SDM_PAGE_16_LOG_ENABLED +// </e> + +// <e> ANT_SDM_PAGE_22_LOG_ENABLED - Enables logging of SDM page 22 in the module. +//========================================================== +#ifndef ANT_SDM_PAGE_22_LOG_ENABLED +#define ANT_SDM_PAGE_22_LOG_ENABLED 0 +#endif +#if ANT_SDM_PAGE_22_LOG_ENABLED +// <o> ANT_SDM_PAGE_22_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef ANT_SDM_PAGE_22_LOG_LEVEL +#define ANT_SDM_PAGE_22_LOG_LEVEL 3 +#endif + +// <o> ANT_SDM_PAGE_22_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef ANT_SDM_PAGE_22_INFO_COLOR +#define ANT_SDM_PAGE_22_INFO_COLOR 0 +#endif + +#endif //ANT_SDM_PAGE_22_LOG_ENABLED +// </e> + +#endif //ANT_SDM_ENABLED +// </e> + +// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration +//========================================================== +#ifndef ANT_SEARCH_CONFIG_ENABLED +#define ANT_SEARCH_CONFIG_ENABLED 0 +#endif +#if ANT_SEARCH_CONFIG_ENABLED +// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out. <0-255> + + +#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT +#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2 +#endif + +// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out. <0-255> + + +#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT +#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10 +#endif + +#endif //ANT_SEARCH_CONFIG_ENABLED +// </e> + +// <e> ANT_STACK_CONFIG_ENABLED - ant_stack_config - Common ANT stack configuration +//========================================================== +#ifndef ANT_STACK_CONFIG_ENABLED +#define ANT_STACK_CONFIG_ENABLED 0 +#endif +#if ANT_STACK_CONFIG_ENABLED +// <o> ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels +#ifndef ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED +#define ANT_CONFIG_TOTAL_CHANNELS_ALLOCATED 0 +#endif + +// <o> ANT_CONFIG_ENCRYPTED_CHANNELS - Encrypted ANT channels +#ifndef ANT_CONFIG_ENCRYPTED_CHANNELS +#define ANT_CONFIG_ENCRYPTED_CHANNELS 0 +#endif + +// <o> ANT_CONFIG_EVENT_QUEUE_SIZE - Event queue size +#ifndef ANT_CONFIG_EVENT_QUEUE_SIZE +#define ANT_CONFIG_EVENT_QUEUE_SIZE 32 +#endif + +// <o> ANT_CONFIG_BURST_QUEUE_SIZE - ANT burst queue size +#ifndef ANT_CONFIG_BURST_QUEUE_SIZE +#define ANT_CONFIG_BURST_QUEUE_SIZE 128 +#endif + +#endif //ANT_STACK_CONFIG_ENABLED +// </e> + +// <q> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP + + +#ifndef ANT_STATE_INDICATOR_ENABLED +#define ANT_STATE_INDICATOR_ENABLED 0 +#endif + +// </h> +//========================================================== + +// <h> nRF_BLE + +//========================================================== +// <q> BLE_ADVERTISING_ENABLED - ble_advertising - Advertising module + + +#ifndef BLE_ADVERTISING_ENABLED +#define BLE_ADVERTISING_ENABLED 1 +#endif + +// <q> BLE_DTM_ENABLED - ble_dtm - Module for testing RF/PHY using DTM commands + + +#ifndef BLE_DTM_ENABLED +#define BLE_DTM_ENABLED 0 +#endif + +// <q> BLE_RACP_ENABLED - ble_racp - Record Access Control Point library + + +#ifndef BLE_RACP_ENABLED +#define BLE_RACP_ENABLED 0 +#endif + +// <q> NRF_BLE_QWR_ENABLED - nrf_ble_qwr - Queued writes support module (prepare/execute write) + + +#ifndef NRF_BLE_QWR_ENABLED +#define NRF_BLE_QWR_ENABLED 0 +#endif + +// <q> PEER_MANAGER_ENABLED - peer_manager - Peer Manager + + +#ifndef PEER_MANAGER_ENABLED +#define PEER_MANAGER_ENABLED 0 +#endif + +// </h> +//========================================================== + +// <h> nRF_BLE_Services + +//========================================================== +// <q> BLE_ANCS_C_ENABLED - ble_ancs_c - Apple Notification Service Client + + +#ifndef BLE_ANCS_C_ENABLED +#define BLE_ANCS_C_ENABLED 0 +#endif + +// <q> BLE_ANS_C_ENABLED - ble_ans_c - Alert Notification Service Client + + +#ifndef BLE_ANS_C_ENABLED +#define BLE_ANS_C_ENABLED 0 +#endif + +// <q> BLE_BAS_C_ENABLED - ble_bas_c - Battery Service Client + + +#ifndef BLE_BAS_C_ENABLED +#define BLE_BAS_C_ENABLED 0 +#endif + +// <q> BLE_BAS_ENABLED - ble_bas - Battery Service + + +#ifndef BLE_BAS_ENABLED +#define BLE_BAS_ENABLED 1 +#endif + +// <q> BLE_CSCS_ENABLED - ble_cscs - Cycling Speed and Cadence Service + + +#ifndef BLE_CSCS_ENABLED +#define BLE_CSCS_ENABLED 0 +#endif + +// <q> BLE_CTS_C_ENABLED - ble_cts_c - Current Time Service Client + + +#ifndef BLE_CTS_C_ENABLED +#define BLE_CTS_C_ENABLED 0 +#endif + +// <q> BLE_DIS_ENABLED - ble_dis - Device Information Service + + +#ifndef BLE_DIS_ENABLED +#define BLE_DIS_ENABLED 1 +#endif + +// <q> BLE_GLS_ENABLED - ble_gls - Glucose Service + + +#ifndef BLE_GLS_ENABLED +#define BLE_GLS_ENABLED 0 +#endif + +// <q> BLE_HIDS_ENABLED - ble_hids - Human Interface Device Service + + +#ifndef BLE_HIDS_ENABLED +#define BLE_HIDS_ENABLED 0 +#endif + +// <e> BLE_HRS_C_ENABLED - ble_hrs_c - Heart Rate Service Client +//========================================================== +#ifndef BLE_HRS_C_ENABLED +#define BLE_HRS_C_ENABLED 0 +#endif +#if BLE_HRS_C_ENABLED +// <o> BLE_HRS_C_RR_INTERVALS_MAX_CNT - Maximum number of RR_INTERVALS per notification to be decoded +#ifndef BLE_HRS_C_RR_INTERVALS_MAX_CNT +#define BLE_HRS_C_RR_INTERVALS_MAX_CNT 30 +#endif + +#endif //BLE_HRS_C_ENABLED +// </e> + +// <q> BLE_HRS_ENABLED - ble_hrs - Heart Rate Service + + +#ifndef BLE_HRS_ENABLED +#define BLE_HRS_ENABLED 0 +#endif + +// <q> BLE_HTS_ENABLED - ble_hts - Health Thermometer Service + + +#ifndef BLE_HTS_ENABLED +#define BLE_HTS_ENABLED 0 +#endif + +// <q> BLE_IAS_C_ENABLED - ble_ias_c - Immediate Alert Service Client + + +#ifndef BLE_IAS_C_ENABLED +#define BLE_IAS_C_ENABLED 0 +#endif + +// <q> BLE_IAS_ENABLED - ble_ias - Immediate Alert Service + + +#ifndef BLE_IAS_ENABLED +#define BLE_IAS_ENABLED 0 +#endif + +// <q> BLE_LBS_C_ENABLED - ble_lbs_c - Nordic LED Button Service Client + + +#ifndef BLE_LBS_C_ENABLED +#define BLE_LBS_C_ENABLED 0 +#endif + +// <q> BLE_LBS_ENABLED - ble_lbs - LED Button Service + + +#ifndef BLE_LBS_ENABLED +#define BLE_LBS_ENABLED 0 +#endif + +// <q> BLE_LLS_ENABLED - ble_lls - Link Loss Service + + +#ifndef BLE_LLS_ENABLED +#define BLE_LLS_ENABLED 0 +#endif + +// <q> BLE_NUS_C_ENABLED - ble_nus_c - Nordic UART Central Service + + +#ifndef BLE_NUS_C_ENABLED +#define BLE_NUS_C_ENABLED 0 +#endif + +// <q> BLE_NUS_ENABLED - ble_nus - Nordic UART Service + + +#ifndef BLE_NUS_ENABLED +#define BLE_NUS_ENABLED 0 +#endif + +// <q> BLE_RSCS_C_ENABLED - ble_rscs_c - Running Speed and Cadence Client + + +#ifndef BLE_RSCS_C_ENABLED +#define BLE_RSCS_C_ENABLED 0 +#endif + +// <q> BLE_RSCS_ENABLED - ble_rscs - Running Speed and Cadence Service + + +#ifndef BLE_RSCS_ENABLED +#define BLE_RSCS_ENABLED 0 +#endif + +// <q> BLE_TPS_ENABLED - ble_tps - TX Power Service + + +#ifndef BLE_TPS_ENABLED +#define BLE_TPS_ENABLED 0 +#endif + +// </h> +//========================================================== + +// <h> nRF_Crypto + +//========================================================== +// <e> NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library +//========================================================== +#ifndef NRF_CRYPTO_ENABLED +#define NRF_CRYPTO_ENABLED 0 +#endif +#if NRF_CRYPTO_ENABLED +// <q> NRF_CRYPTO_BACKEND_CC310_LIB - Enables the ARM Cryptocell CC310 backend + + +// <i> The hardware-accelerated cryptography backend is available only on nRF52840. + +#ifndef NRF_CRYPTO_BACKEND_CC310_LIB +#define NRF_CRYPTO_BACKEND_CC310_LIB 0 +#endif + +// <e> NRF_CRYPTO_BACKEND_MICRO_ECC - Enables the micro-ecc software backend + +// <i> The micro-ecc library provides a software implementation of ECC cryptography for nRF5 Series devices. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC +#define NRF_CRYPTO_BACKEND_MICRO_ECC 0 +#endif +#if NRF_CRYPTO_BACKEND_MICRO_ECC +// <q> NRF_CRYPTO_BACKEND_SW - Enables hashing + + +// <i> If enabled, the cryptography library supports hashing (needed for signing). + +#ifndef NRF_CRYPTO_BACKEND_SW +#define NRF_CRYPTO_BACKEND_SW 0 +#endif + +// <q> NRF_CRYPTO_SUPPORTS_RNG - Enables RNG + + +// <i> If enabled, the cryptography library supports random number generation (needed for key generation). + +#ifndef NRF_CRYPTO_SUPPORTS_RNG +#define NRF_CRYPTO_SUPPORTS_RNG 0 +#endif + +#endif //NRF_CRYPTO_BACKEND_MICRO_ECC +// </e> + +#endif //NRF_CRYPTO_ENABLED +// </e> + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> APP_USBD_ENABLED - app_usbd - USB Device library +//========================================================== +#ifndef APP_USBD_ENABLED +#define APP_USBD_ENABLED 0 +#endif +#if APP_USBD_ENABLED +// <o> APP_USBD_VID - Vendor ID <0x0000-0xFFFF> + + +// <i> Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/ + +#ifndef APP_USBD_VID +#define APP_USBD_VID 0 +#endif + +// <o> APP_USBD_PID - Product ID <0x0000-0xFFFF> + + +// <i> Selected Product ID + +#ifndef APP_USBD_PID +#define APP_USBD_PID 0 +#endif + +// <o> APP_USBD_DEVICE_VER_MAJOR - Device version, major part <0-99> + + +// <i> Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MAJOR +#define APP_USBD_DEVICE_VER_MAJOR 1 +#endif + +// <o> APP_USBD_DEVICE_VER_MINOR - Device version, minor part <0-99> + + +// <i> Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MINOR +#define APP_USBD_DEVICE_VER_MINOR 0 +#endif + +#endif //APP_USBD_ENABLED +// </e> + +// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +#if CLOCK_ENABLED +// <o> CLOCK_CONFIG_XTAL_FREQ - HF XTAL Frequency + +// <0=> Default (64 MHz) + +#ifndef CLOCK_CONFIG_XTAL_FREQ +#define CLOCK_CONFIG_XTAL_FREQ 0 +#endif + +// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 6 +#endif + +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +#if CLOCK_CONFIG_LOG_ENABLED +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //CLOCK_CONFIG_LOG_ENABLED +// </e> + +#endif //CLOCK_ENABLED +// </e> + +// <e> COMP_ENABLED - nrf_drv_comp - COMP peripheral driver +//========================================================== +#ifndef COMP_ENABLED +#define COMP_ENABLED 0 +#endif +#if COMP_ENABLED +// <o> COMP_CONFIG_REF - Reference voltage + +// <0=> Internal 1.2V +// <1=> Internal 1.8V +// <2=> Internal 2.4V +// <4=> VDD +// <7=> ARef + +#ifndef COMP_CONFIG_REF +#define COMP_CONFIG_REF 1 +#endif + +// <o> COMP_CONFIG_MAIN_MODE - Main mode + +// <0=> Single ended +// <1=> Differential + +#ifndef COMP_CONFIG_MAIN_MODE +#define COMP_CONFIG_MAIN_MODE 0 +#endif + +// <o> COMP_CONFIG_SPEED_MODE - Speed mode + +// <0=> Low power +// <1=> Normal +// <2=> High speed + +#ifndef COMP_CONFIG_SPEED_MODE +#define COMP_CONFIG_SPEED_MODE 2 +#endif + +// <o> COMP_CONFIG_HYST - Hystheresis + +// <0=> No +// <1=> 50mV + +#ifndef COMP_CONFIG_HYST +#define COMP_CONFIG_HYST 0 +#endif + +// <o> COMP_CONFIG_ISOURCE - Current Source + +// <0=> Off +// <1=> 2.5 uA +// <2=> 5 uA +// <3=> 10 uA + +#ifndef COMP_CONFIG_ISOURCE +#define COMP_CONFIG_ISOURCE 0 +#endif + +// <o> COMP_CONFIG_INPUT - Analog input + +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef COMP_CONFIG_INPUT +#define COMP_CONFIG_INPUT 0 +#endif + +// <o> COMP_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef COMP_CONFIG_IRQ_PRIORITY +#define COMP_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +#if COMP_CONFIG_LOG_ENABLED +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //COMP_CONFIG_LOG_ENABLED +// </e> + +#endif //COMP_ENABLED +// </e> + +// <e> EGU_ENABLED - nrf_drv_swi - SWI(EGU) peripheral driver +//========================================================== +#ifndef EGU_ENABLED +#define EGU_ENABLED 0 +#endif +#if EGU_ENABLED +// <e> SWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SWI_CONFIG_LOG_ENABLED +#define SWI_CONFIG_LOG_ENABLED 0 +#endif +#if SWI_CONFIG_LOG_ENABLED +// <o> SWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SWI_CONFIG_LOG_LEVEL +#define SWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SWI_CONFIG_INFO_COLOR +#define SWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SWI_CONFIG_DEBUG_COLOR +#define SWI_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //SWI_CONFIG_LOG_ENABLED +// </e> + +#endif //EGU_ENABLED +// </e> + +// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver +//========================================================== +#ifndef GPIOTE_ENABLED +#define GPIOTE_ENABLED 1 +#endif +#if GPIOTE_ENABLED +// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS +#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 8 +#endif + +// <o> GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef GPIOTE_CONFIG_IRQ_PRIORITY +#define GPIOTE_CONFIG_IRQ_PRIORITY 6 +#endif + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +#if GPIOTE_CONFIG_LOG_ENABLED +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //GPIOTE_CONFIG_LOG_ENABLED +// </e> + +#endif //GPIOTE_ENABLED +// </e> + +// <e> I2S_ENABLED - nrf_drv_i2s - I2S peripheral driver +//========================================================== +#ifndef I2S_ENABLED +#define I2S_ENABLED 0 +#endif +#if I2S_ENABLED +// <o> I2S_CONFIG_SCK_PIN - SCK pin <0-31> + + +#ifndef I2S_CONFIG_SCK_PIN +#define I2S_CONFIG_SCK_PIN 31 +#endif + +// <o> I2S_CONFIG_LRCK_PIN - LRCK pin <1-31> + + +#ifndef I2S_CONFIG_LRCK_PIN +#define I2S_CONFIG_LRCK_PIN 30 +#endif + +// <o> I2S_CONFIG_MCK_PIN - MCK pin +#ifndef I2S_CONFIG_MCK_PIN +#define I2S_CONFIG_MCK_PIN 255 +#endif + +// <o> I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31> + + +#ifndef I2S_CONFIG_SDOUT_PIN +#define I2S_CONFIG_SDOUT_PIN 29 +#endif + +// <o> I2S_CONFIG_SDIN_PIN - SDIN pin <0-31> + + +#ifndef I2S_CONFIG_SDIN_PIN +#define I2S_CONFIG_SDIN_PIN 28 +#endif + +// <o> I2S_CONFIG_MASTER - Mode + +// <0=> Master +// <1=> Slave + +#ifndef I2S_CONFIG_MASTER +#define I2S_CONFIG_MASTER 0 +#endif + +// <o> I2S_CONFIG_FORMAT - Format + +// <0=> I2S +// <1=> Aligned + +#ifndef I2S_CONFIG_FORMAT +#define I2S_CONFIG_FORMAT 0 +#endif + +// <o> I2S_CONFIG_ALIGN - Alignment + +// <0=> Left +// <1=> Right + +#ifndef I2S_CONFIG_ALIGN +#define I2S_CONFIG_ALIGN 0 +#endif + +// <o> I2S_CONFIG_SWIDTH - Sample width (bits) + +// <0=> 8 +// <1=> 16 +// <2=> 24 + +#ifndef I2S_CONFIG_SWIDTH +#define I2S_CONFIG_SWIDTH 1 +#endif + +// <o> I2S_CONFIG_CHANNELS - Channels + +// <0=> Stereo +// <1=> Left +// <2=> Right + +#ifndef I2S_CONFIG_CHANNELS +#define I2S_CONFIG_CHANNELS 1 +#endif + +// <o> I2S_CONFIG_MCK_SETUP - MCK behavior + +// <0=> Disabled +// <2147483648=> 32MHz/2 +// <1342177280=> 32MHz/3 +// <1073741824=> 32MHz/4 +// <805306368=> 32MHz/5 +// <671088640=> 32MHz/6 +// <536870912=> 32MHz/8 +// <402653184=> 32MHz/10 +// <369098752=> 32MHz/11 +// <285212672=> 32MHz/15 +// <268435456=> 32MHz/16 +// <201326592=> 32MHz/21 +// <184549376=> 32MHz/23 +// <142606336=> 32MHz/30 +// <138412032=> 32MHz/31 +// <134217728=> 32MHz/32 +// <100663296=> 32MHz/42 +// <68157440=> 32MHz/63 +// <34340864=> 32MHz/125 + +#ifndef I2S_CONFIG_MCK_SETUP +#define I2S_CONFIG_MCK_SETUP 536870912 +#endif + +// <o> I2S_CONFIG_RATIO - MCK/LRCK ratio + +// <0=> 32x +// <1=> 48x +// <2=> 64x +// <3=> 96x +// <4=> 128x +// <5=> 192x +// <6=> 256x +// <7=> 384x +// <8=> 512x + +#ifndef I2S_CONFIG_RATIO +#define I2S_CONFIG_RATIO 2000 +#endif + +// <o> I2S_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef I2S_CONFIG_IRQ_PRIORITY +#define I2S_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> I2S_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef I2S_CONFIG_LOG_ENABLED +#define I2S_CONFIG_LOG_ENABLED 0 +#endif +#if I2S_CONFIG_LOG_ENABLED +// <o> I2S_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef I2S_CONFIG_LOG_LEVEL +#define I2S_CONFIG_LOG_LEVEL 3 +#endif + +// <o> I2S_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef I2S_CONFIG_INFO_COLOR +#define I2S_CONFIG_INFO_COLOR 0 +#endif + +// <o> I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef I2S_CONFIG_DEBUG_COLOR +#define I2S_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //I2S_CONFIG_LOG_ENABLED +// </e> + +#endif //I2S_ENABLED +// </e> + +// <e> LPCOMP_ENABLED - nrf_drv_lpcomp - LPCOMP peripheral driver +//========================================================== +#ifndef LPCOMP_ENABLED +#define LPCOMP_ENABLED 0 +#endif +#if LPCOMP_ENABLED +// <o> LPCOMP_CONFIG_REFERENCE - Reference voltage + +// <0=> Supply 1/8 +// <1=> Supply 2/8 +// <2=> Supply 3/8 +// <3=> Supply 4/8 +// <4=> Supply 5/8 +// <5=> Supply 6/8 +// <6=> Supply 7/8 +// <8=> Supply 1/16 (nRF52) +// <9=> Supply 3/16 (nRF52) +// <10=> Supply 5/16 (nRF52) +// <11=> Supply 7/16 (nRF52) +// <12=> Supply 9/16 (nRF52) +// <13=> Supply 11/16 (nRF52) +// <14=> Supply 13/16 (nRF52) +// <15=> Supply 15/16 (nRF52) +// <7=> External Ref 0 +// <65543=> External Ref 1 + +#ifndef LPCOMP_CONFIG_REFERENCE +#define LPCOMP_CONFIG_REFERENCE 3 +#endif + +// <o> LPCOMP_CONFIG_DETECTION - Detection + +// <0=> Crossing +// <1=> Up +// <2=> Down + +#ifndef LPCOMP_CONFIG_DETECTION +#define LPCOMP_CONFIG_DETECTION 2 +#endif + +// <o> LPCOMP_CONFIG_INPUT - Analog input + +// <0=> 0 +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef LPCOMP_CONFIG_INPUT +#define LPCOMP_CONFIG_INPUT 0 +#endif + +// <q> LPCOMP_CONFIG_HYST - Hysteresis + + +#ifndef LPCOMP_CONFIG_HYST +#define LPCOMP_CONFIG_HYST 0 +#endif + +// <o> LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef LPCOMP_CONFIG_IRQ_PRIORITY +#define LPCOMP_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +#if LPCOMP_CONFIG_LOG_ENABLED +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //LPCOMP_CONFIG_LOG_ENABLED +// </e> + +#endif //LPCOMP_ENABLED +// </e> + +// <e> PDM_ENABLED - nrf_drv_pdm - PDM peripheral driver +//========================================================== +#ifndef PDM_ENABLED +#define PDM_ENABLED 1 +#endif +#if PDM_ENABLED +// <o> PDM_CONFIG_MODE - Mode + +// <0=> Stereo +// <1=> Mono + +#ifndef PDM_CONFIG_MODE +#define PDM_CONFIG_MODE 1 +#endif + +// <o> PDM_CONFIG_EDGE - Edge + +// <0=> Left falling +// <1=> Left rising + +#ifndef PDM_CONFIG_EDGE +#define PDM_CONFIG_EDGE 0 +#endif + +// <o> PDM_CONFIG_CLOCK_FREQ - Clock frequency + +// <134217728=> 1000k +// <138412032=> 1032k (default) +// <142606336=> 1067k + +#ifndef PDM_CONFIG_CLOCK_FREQ +#define PDM_CONFIG_CLOCK_FREQ 138412032 +#endif + +// <o> PDM_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef PDM_CONFIG_IRQ_PRIORITY +#define PDM_CONFIG_IRQ_PRIORITY 6 +#endif + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +#if PDM_CONFIG_LOG_ENABLED +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //PDM_CONFIG_LOG_ENABLED +// </e> + +#endif //PDM_ENABLED +// </e> + +// <e> PERIPHERAL_RESOURCE_SHARING_ENABLED - nrf_drv_common - Peripheral drivers common module +//========================================================== +#ifndef PERIPHERAL_RESOURCE_SHARING_ENABLED +#define PERIPHERAL_RESOURCE_SHARING_ENABLED 0 +#endif +#if PERIPHERAL_RESOURCE_SHARING_ENABLED +// <e> COMMON_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMMON_CONFIG_LOG_ENABLED +#define COMMON_CONFIG_LOG_ENABLED 0 +#endif +#if COMMON_CONFIG_LOG_ENABLED +// <o> COMMON_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMMON_CONFIG_LOG_LEVEL +#define COMMON_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMMON_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMMON_CONFIG_INFO_COLOR +#define COMMON_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMMON_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMMON_CONFIG_DEBUG_COLOR +#define COMMON_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //COMMON_CONFIG_LOG_ENABLED +// </e> + +#endif //PERIPHERAL_RESOURCE_SHARING_ENABLED +// </e> + +// <e> POWER_ENABLED - nrf_drv_power - POWER peripheral driver +//========================================================== +#ifndef POWER_ENABLED +#define POWER_ENABLED 0 +#endif +#if POWER_ENABLED +// <o> POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef POWER_CONFIG_IRQ_PRIORITY +#define POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// <i> This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCEN +#define POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// <q> POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// <i> This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCENHV +#define POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +#endif //POWER_ENABLED +// </e> + +// <e> PPI_ENABLED - nrf_drv_ppi - PPI peripheral driver +//========================================================== +#ifndef PPI_ENABLED +#define PPI_ENABLED 0 +#endif +#if PPI_ENABLED +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +#if PPI_CONFIG_LOG_ENABLED +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //PPI_CONFIG_LOG_ENABLED +// </e> + +#endif //PPI_ENABLED +// </e> + +// <e> PWM_ENABLED - nrf_drv_pwm - PWM peripheral driver +//========================================================== +#ifndef PWM_ENABLED +#define PWM_ENABLED 1 +#endif +#if PWM_ENABLED +// <o> PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31> + + +#ifndef PWM_DEFAULT_CONFIG_OUT0_PIN +#define PWM_DEFAULT_CONFIG_OUT0_PIN 31 +#endif + +// <o> PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31> + + +#ifndef PWM_DEFAULT_CONFIG_OUT1_PIN +#define PWM_DEFAULT_CONFIG_OUT1_PIN 31 +#endif + +// <o> PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31> + + +#ifndef PWM_DEFAULT_CONFIG_OUT2_PIN +#define PWM_DEFAULT_CONFIG_OUT2_PIN 31 +#endif + +// <o> PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31> + + +#ifndef PWM_DEFAULT_CONFIG_OUT3_PIN +#define PWM_DEFAULT_CONFIG_OUT3_PIN 31 +#endif + +// <o> PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock + +// <0=> 16 MHz +// <1=> 8 MHz +// <2=> 4 MHz +// <3=> 2 MHz +// <4=> 1 MHz +// <5=> 500 kHz +// <6=> 250 kHz +// <7=> 125 MHz + +#ifndef PWM_DEFAULT_CONFIG_BASE_CLOCK +#define PWM_DEFAULT_CONFIG_BASE_CLOCK 4 +#endif + +// <o> PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode + +// <0=> Up +// <1=> Up and Down + +#ifndef PWM_DEFAULT_CONFIG_COUNT_MODE +#define PWM_DEFAULT_CONFIG_COUNT_MODE 0 +#endif + +// <o> PWM_DEFAULT_CONFIG_TOP_VALUE - Top value +#ifndef PWM_DEFAULT_CONFIG_TOP_VALUE +#define PWM_DEFAULT_CONFIG_TOP_VALUE 1000 +#endif + +// <o> PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode + +// <0=> Common +// <1=> Grouped +// <2=> Individual +// <3=> Waveform + +#ifndef PWM_DEFAULT_CONFIG_LOAD_MODE +#define PWM_DEFAULT_CONFIG_LOAD_MODE 0 +#endif + +// <o> PWM_DEFAULT_CONFIG_STEP_MODE - Step mode + +// <0=> Auto +// <1=> Triggered + +#ifndef PWM_DEFAULT_CONFIG_STEP_MODE +#define PWM_DEFAULT_CONFIG_STEP_MODE 0 +#endif + +// <o> PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef PWM_DEFAULT_CONFIG_IRQ_PRIORITY +#define PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> PWM0_ENABLED - Enable PWM0 instance + + +#ifndef PWM0_ENABLED +#define PWM0_ENABLED 1 +#endif + +// <q> PWM1_ENABLED - Enable PWM1 instance + + +#ifndef PWM1_ENABLED +#define PWM1_ENABLED 0 +#endif + +// <q> PWM2_ENABLED - Enable PWM2 instance + + +#ifndef PWM2_ENABLED +#define PWM2_ENABLED 0 +#endif + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +#if PWM_CONFIG_LOG_ENABLED +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //PWM_CONFIG_LOG_ENABLED +// </e> + +// <e> PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for PWM. + +// <i> The workaround uses interrupts to wake up the CPU and ensure +// <i> it is active when PWM is about to start a DMA transfer. For +// <i> initial transfer, done when a playback is started via PPI, +// <i> a specific EGU instance is used to generate the interrupt. +// <i> During the playback, the PWM interrupt triggered on SEQEND +// <i> event of a preceding sequence is used to protect the transfer +// <i> done for the next sequence to be played. +//========================================================== +#ifndef PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED +#define PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0 +#endif +#if PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED +// <o> PWM_NRF52_ANOMALY_109_EGU_INSTANCE - EGU instance used by the nRF52 Anomaly 109 workaround for PWM. + +// <0=> EGU0 +// <1=> EGU1 +// <2=> EGU2 +// <3=> EGU3 +// <4=> EGU4 +// <5=> EGU5 + +#ifndef PWM_NRF52_ANOMALY_109_EGU_INSTANCE +#define PWM_NRF52_ANOMALY_109_EGU_INSTANCE 5 +#endif + +#endif //PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED +// </e> + +#endif //PWM_ENABLED +// </e> + +// <e> QDEC_ENABLED - nrf_drv_qdec - QDEC peripheral driver +//========================================================== +#ifndef QDEC_ENABLED +#define QDEC_ENABLED 0 +#endif +#if QDEC_ENABLED +// <o> QDEC_CONFIG_REPORTPER - Report period + +// <0=> 10 Samples +// <1=> 40 Samples +// <2=> 80 Samples +// <3=> 120 Samples +// <4=> 160 Samples +// <5=> 200 Samples +// <6=> 240 Samples +// <7=> 280 Samples + +#ifndef QDEC_CONFIG_REPORTPER +#define QDEC_CONFIG_REPORTPER 0 +#endif + +// <o> QDEC_CONFIG_SAMPLEPER - Sample period + +// <0=> 128 us +// <1=> 256 us +// <2=> 512 us +// <3=> 1024 us +// <4=> 2048 us +// <5=> 4096 us +// <6=> 8192 us +// <7=> 16384 us + +#ifndef QDEC_CONFIG_SAMPLEPER +#define QDEC_CONFIG_SAMPLEPER 7 +#endif + +// <o> QDEC_CONFIG_PIO_A - A pin <0-31> + + +#ifndef QDEC_CONFIG_PIO_A +#define QDEC_CONFIG_PIO_A 31 +#endif + +// <o> QDEC_CONFIG_PIO_B - B pin <0-31> + + +#ifndef QDEC_CONFIG_PIO_B +#define QDEC_CONFIG_PIO_B 31 +#endif + +// <o> QDEC_CONFIG_PIO_LED - LED pin <0-31> + + +#ifndef QDEC_CONFIG_PIO_LED +#define QDEC_CONFIG_PIO_LED 31 +#endif + +// <o> QDEC_CONFIG_LEDPRE - LED pre +#ifndef QDEC_CONFIG_LEDPRE +#define QDEC_CONFIG_LEDPRE 511 +#endif + +// <o> QDEC_CONFIG_LEDPOL - LED polarity + +// <0=> Active low +// <1=> Active high + +#ifndef QDEC_CONFIG_LEDPOL +#define QDEC_CONFIG_LEDPOL 1 +#endif + +// <q> QDEC_CONFIG_DBFEN - Debouncing enable + + +#ifndef QDEC_CONFIG_DBFEN +#define QDEC_CONFIG_DBFEN 0 +#endif + +// <q> QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable + + +#ifndef QDEC_CONFIG_SAMPLE_INTEN +#define QDEC_CONFIG_SAMPLE_INTEN 0 +#endif + +// <o> QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef QDEC_CONFIG_IRQ_PRIORITY +#define QDEC_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +#if QDEC_CONFIG_LOG_ENABLED +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //QDEC_CONFIG_LOG_ENABLED +// </e> + +#endif //QDEC_ENABLED +// </e> + +// <e> RNG_ENABLED - nrf_drv_rng - RNG peripheral driver +//========================================================== +#ifndef RNG_ENABLED +#define RNG_ENABLED 1 +#endif +#if RNG_ENABLED +// <q> RNG_CONFIG_ERROR_CORRECTION - Error correction + + +#ifndef RNG_CONFIG_ERROR_CORRECTION +#define RNG_CONFIG_ERROR_CORRECTION 0 +#endif + +// <o> RNG_CONFIG_POOL_SIZE - Pool size +#ifndef RNG_CONFIG_POOL_SIZE +#define RNG_CONFIG_POOL_SIZE 32 +#endif + +// <o> RNG_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef RNG_CONFIG_IRQ_PRIORITY +#define RNG_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +#if RNG_CONFIG_LOG_ENABLED +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +#endif //RNG_CONFIG_LOG_ENABLED +// </e> + +#endif //RNG_ENABLED +// </e> + +// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver +//========================================================== +#ifndef RTC_ENABLED +#define RTC_ENABLED 1 +#endif +#if RTC_ENABLED +// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768> + + +#ifndef RTC_DEFAULT_CONFIG_FREQUENCY +#define RTC_DEFAULT_CONFIG_FREQUENCY 32768 +#endif + +// <q> RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering + + +#ifndef RTC_DEFAULT_CONFIG_RELIABLE +#define RTC_DEFAULT_CONFIG_RELIABLE 0 +#endif + +// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY +#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> RTC0_ENABLED - Enable RTC0 instance + + +#ifndef RTC0_ENABLED +#define RTC0_ENABLED 0 +#endif + +// <q> RTC1_ENABLED - Enable RTC1 instance + + +#ifndef RTC1_ENABLED +#define RTC1_ENABLED 0 +#endif + +// <q> RTC2_ENABLED - Enable RTC2 instance + + +#ifndef RTC2_ENABLED +#define RTC2_ENABLED 1 +#endif + +// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt +#ifndef NRF_MAXIMUM_LATENCY_US +#define NRF_MAXIMUM_LATENCY_US 2000 +#endif + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +#if RTC_CONFIG_LOG_ENABLED +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //RTC_CONFIG_LOG_ENABLED +// </e> + +#endif //RTC_ENABLED +// </e> + +// <e> SAADC_ENABLED - nrf_drv_saadc - SAADC peripheral driver +//========================================================== +#ifndef SAADC_ENABLED +#define SAADC_ENABLED 1 +#endif +#if SAADC_ENABLED +// <o> SAADC_CONFIG_RESOLUTION - Resolution + +// <0=> 8 bit +// <1=> 10 bit +// <2=> 12 bit +// <3=> 14 bit + +#ifndef SAADC_CONFIG_RESOLUTION +#define SAADC_CONFIG_RESOLUTION 1 +#endif + +// <o> SAADC_CONFIG_OVERSAMPLE - Sample period + +// <0=> Disabled +// <1=> 2x +// <2=> 4x +// <3=> 8x +// <4=> 16x +// <5=> 32x +// <6=> 64x +// <7=> 128x +// <8=> 256x + +#ifndef SAADC_CONFIG_OVERSAMPLE +#define SAADC_CONFIG_OVERSAMPLE 8 +#endif + +// <q> SAADC_CONFIG_LP_MODE - Enabling low power mode + + +#ifndef SAADC_CONFIG_LP_MODE +#define SAADC_CONFIG_LP_MODE 1 +#endif + +// <o> SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef SAADC_CONFIG_IRQ_PRIORITY +#define SAADC_CONFIG_IRQ_PRIORITY 6 +#endif + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +#if SAADC_CONFIG_LOG_ENABLED +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //SAADC_CONFIG_LOG_ENABLED +// </e> + +#endif //SAADC_ENABLED +// </e> + +// <e> SPIS_ENABLED - nrf_drv_spis - SPI Slave driver +//========================================================== +#ifndef SPIS_ENABLED +#define SPIS_ENABLED 0 +#endif +#if SPIS_ENABLED +// <o> SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef SPIS_DEFAULT_CONFIG_IRQ_PRIORITY +#define SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> SPIS_DEFAULT_MODE - Mode + +// <0=> MODE_0 +// <1=> MODE_1 +// <2=> MODE_2 +// <3=> MODE_3 + +#ifndef SPIS_DEFAULT_MODE +#define SPIS_DEFAULT_MODE 0 +#endif + +// <o> SPIS_DEFAULT_BIT_ORDER - SPIS default bit order + +// <0=> MSB first +// <1=> LSB first + +#ifndef SPIS_DEFAULT_BIT_ORDER +#define SPIS_DEFAULT_BIT_ORDER 0 +#endif + +// <o> SPIS_DEFAULT_DEF - SPIS default DEF character <0-255> + + +#ifndef SPIS_DEFAULT_DEF +#define SPIS_DEFAULT_DEF 255 +#endif + +// <o> SPIS_DEFAULT_ORC - SPIS default ORC character <0-255> + + +#ifndef SPIS_DEFAULT_ORC +#define SPIS_DEFAULT_ORC 255 +#endif + +// <q> SPIS0_ENABLED - Enable SPIS0 instance + + +#ifndef SPIS0_ENABLED +#define SPIS0_ENABLED 0 +#endif + +// <q> SPIS1_ENABLED - Enable SPIS1 instance + + +#ifndef SPIS1_ENABLED +#define SPIS1_ENABLED 0 +#endif + +// <q> SPIS2_ENABLED - Enable SPIS2 instance + + +#ifndef SPIS2_ENABLED +#define SPIS2_ENABLED 0 +#endif + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +#if SPIS_CONFIG_LOG_ENABLED +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //SPIS_CONFIG_LOG_ENABLED +// </e> + +// <q> SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for SPIS. + + +// <i> The workaround uses a GPIOTE channel to generate interrupts +// <i> on falling edges detected on the CSN line. This will make +// <i> the CPU active for the moment when SPIS starts DMA transfers, +// <i> and this way the transfers will be protected. +// <i> This workaround uses GPIOTE driver, so this driver must be +// <i> enabled as well. + +#ifndef SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED +#define SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0 +#endif + +#endif //SPIS_ENABLED +// </e> + +// <e> SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver +//========================================================== +#ifndef SPI_ENABLED +#define SPI_ENABLED 0 +#endif +#if SPI_ENABLED +// <o> SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef SPI_DEFAULT_CONFIG_IRQ_PRIORITY +#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> SPI0_ENABLED - Enable SPI0 instance +//========================================================== +#ifndef SPI0_ENABLED +#define SPI0_ENABLED 0 +#endif +#if SPI0_ENABLED +// <q> SPI0_USE_EASY_DMA - Use EasyDMA + + +#ifndef SPI0_USE_EASY_DMA +#define SPI0_USE_EASY_DMA 1 +#endif + +// <o> SPI0_DEFAULT_FREQUENCY - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef SPI0_DEFAULT_FREQUENCY +#define SPI0_DEFAULT_FREQUENCY 1073741824 +#endif + +#endif //SPI0_ENABLED +// </e> + +// <e> SPI1_ENABLED - Enable SPI1 instance +//========================================================== +#ifndef SPI1_ENABLED +#define SPI1_ENABLED 0 +#endif +#if SPI1_ENABLED +// <q> SPI1_USE_EASY_DMA - Use EasyDMA + + +#ifndef SPI1_USE_EASY_DMA +#define SPI1_USE_EASY_DMA 1 +#endif + +// <o> SPI1_DEFAULT_FREQUENCY - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef SPI1_DEFAULT_FREQUENCY +#define SPI1_DEFAULT_FREQUENCY 1073741824 +#endif + +#endif //SPI1_ENABLED +// </e> + +// <e> SPI2_ENABLED - Enable SPI2 instance +//========================================================== +#ifndef SPI2_ENABLED +#define SPI2_ENABLED 0 +#endif +#if SPI2_ENABLED +// <q> SPI2_USE_EASY_DMA - Use EasyDMA + + +#ifndef SPI2_USE_EASY_DMA +#define SPI2_USE_EASY_DMA 1 +#endif + +// <q> SPI2_DEFAULT_FREQUENCY - Use EasyDMA + + +#ifndef SPI2_DEFAULT_FREQUENCY +#define SPI2_DEFAULT_FREQUENCY 1 +#endif + +#endif //SPI2_ENABLED +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +#if SPI_CONFIG_LOG_ENABLED +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //SPI_CONFIG_LOG_ENABLED +// </e> + +// <q> SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 anomaly 109 workaround for SPIM. + + +// <i> The workaround uses interrupts to wake up the CPU by catching +// <i> a start event of zero-length transmission to start the clock. This +// <i> ensures that the DMA transfer will be executed without issues and +// <i> that the proper transfer will be started. See more in the Errata +// <i> document or Anomaly 109 Addendum located at +// <i> https://infocenter.nordicsemi.com/ + +#ifndef SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED +#define SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0 +#endif + +#endif //SPI_ENABLED +// </e> + +// <e> TIMER_ENABLED - nrf_drv_timer - TIMER periperal driver +//========================================================== +#ifndef TIMER_ENABLED +#define TIMER_ENABLED 0 +#endif +#if TIMER_ENABLED +// <o> TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode + +// <0=> 16 MHz +// <1=> 8 MHz +// <2=> 4 MHz +// <3=> 2 MHz +// <4=> 1 MHz +// <5=> 500 kHz +// <6=> 250 kHz +// <7=> 125 kHz +// <8=> 62.5 kHz +// <9=> 31.25 kHz + +#ifndef TIMER_DEFAULT_CONFIG_FREQUENCY +#define TIMER_DEFAULT_CONFIG_FREQUENCY 0 +#endif + +// <o> TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation + +// <0=> Timer +// <1=> Counter + +#ifndef TIMER_DEFAULT_CONFIG_MODE +#define TIMER_DEFAULT_CONFIG_MODE 0 +#endif + +// <o> TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width + +// <0=> 16 bit +// <1=> 8 bit +// <2=> 24 bit +// <3=> 32 bit + +#ifndef TIMER_DEFAULT_CONFIG_BIT_WIDTH +#define TIMER_DEFAULT_CONFIG_BIT_WIDTH 0 +#endif + +// <o> TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef TIMER_DEFAULT_CONFIG_IRQ_PRIORITY +#define TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> TIMER0_ENABLED - Enable TIMER0 instance + + +#ifndef TIMER0_ENABLED +#define TIMER0_ENABLED 0 +#endif + +// <q> TIMER1_ENABLED - Enable TIMER1 instance + + +#ifndef TIMER1_ENABLED +#define TIMER1_ENABLED 0 +#endif + +// <q> TIMER2_ENABLED - Enable TIMER2 instance + + +#ifndef TIMER2_ENABLED +#define TIMER2_ENABLED 0 +#endif + +// <q> TIMER3_ENABLED - Enable TIMER3 instance + + +#ifndef TIMER3_ENABLED +#define TIMER3_ENABLED 0 +#endif + +// <q> TIMER4_ENABLED - Enable TIMER4 instance + + +#ifndef TIMER4_ENABLED +#define TIMER4_ENABLED 0 +#endif + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +#if TIMER_CONFIG_LOG_ENABLED +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //TIMER_CONFIG_LOG_ENABLED +// </e> + +#endif //TIMER_ENABLED +// </e> + +// <e> TWIS_ENABLED - nrf_drv_twis - TWIS peripheral driver +//========================================================== +#ifndef TWIS_ENABLED +#define TWIS_ENABLED 0 +#endif +#if TWIS_ENABLED +// <o> TWIS_DEFAULT_CONFIG_ADDR0 - Address0 +#ifndef TWIS_DEFAULT_CONFIG_ADDR0 +#define TWIS_DEFAULT_CONFIG_ADDR0 0 +#endif + +// <o> TWIS_DEFAULT_CONFIG_ADDR1 - Address1 +#ifndef TWIS_DEFAULT_CONFIG_ADDR1 +#define TWIS_DEFAULT_CONFIG_ADDR1 0 +#endif + +// <o> TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration + +// <0=> Disabled +// <1=> Pull down +// <3=> Pull up + +#ifndef TWIS_DEFAULT_CONFIG_SCL_PULL +#define TWIS_DEFAULT_CONFIG_SCL_PULL 0 +#endif + +// <o> TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration + +// <0=> Disabled +// <1=> Pull down +// <3=> Pull up + +#ifndef TWIS_DEFAULT_CONFIG_SDA_PULL +#define TWIS_DEFAULT_CONFIG_SDA_PULL 0 +#endif + +// <o> TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef TWIS_DEFAULT_CONFIG_IRQ_PRIORITY +#define TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> TWIS0_ENABLED - Enable TWIS0 instance + + +#ifndef TWIS0_ENABLED +#define TWIS0_ENABLED 0 +#endif + +// <q> TWIS1_ENABLED - Enable TWIS1 instance + + +#ifndef TWIS1_ENABLED +#define TWIS1_ENABLED 0 +#endif + +// <q> TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once + + +// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. + +#ifndef TWIS_ASSUME_INIT_AFTER_RESET_ONLY +#define TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0 +#endif + +// <q> TWIS_NO_SYNC_MODE - Remove support for synchronous mode + + +// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. + +#ifndef TWIS_NO_SYNC_MODE +#define TWIS_NO_SYNC_MODE 0 +#endif + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +#if TWIS_CONFIG_LOG_ENABLED +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //TWIS_CONFIG_LOG_ENABLED +// </e> + +#endif //TWIS_ENABLED +// </e> + +// <e> TWI_ENABLED - nrf_drv_twi - TWI/TWIM peripheral driver +//========================================================== +#ifndef TWI_ENABLED +#define TWI_ENABLED 1 +#endif +#if TWI_ENABLED +// <o> TWI_DEFAULT_CONFIG_FREQUENCY - Frequency + +// <26738688=> 100k +// <67108864=> 250k +// <104857600=> 400k + +#ifndef TWI_DEFAULT_CONFIG_FREQUENCY +#define TWI_DEFAULT_CONFIG_FREQUENCY 104857600 +#endif + +// <q> TWI_DEFAULT_CONFIG_CLR_BUS_INIT - Enables bus clearing procedure during init + + +#ifndef TWI_DEFAULT_CONFIG_CLR_BUS_INIT +#define TWI_DEFAULT_CONFIG_CLR_BUS_INIT 0 +#endif + +// <q> TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit + + +#ifndef TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT +#define TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0 +#endif + +// <o> TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef TWI_DEFAULT_CONFIG_IRQ_PRIORITY +#define TWI_DEFAULT_CONFIG_IRQ_PRIORITY 6 +#endif + +// <e> TWI0_ENABLED - Enable TWI0 instance +//========================================================== +#ifndef TWI0_ENABLED +#define TWI0_ENABLED 1 +#endif +#if TWI0_ENABLED +// <q> TWI0_USE_EASY_DMA - Use EasyDMA (if present) + + +#ifndef TWI0_USE_EASY_DMA +#define TWI0_USE_EASY_DMA 0 +#endif + +#endif //TWI0_ENABLED +// </e> + +// <e> TWI1_ENABLED - Enable TWI1 instance +//========================================================== +#ifndef TWI1_ENABLED +#define TWI1_ENABLED 0 +#endif +#if TWI1_ENABLED +// <q> TWI1_USE_EASY_DMA - Use EasyDMA (if present) + + +#ifndef TWI1_USE_EASY_DMA +#define TWI1_USE_EASY_DMA 0 +#endif + +#endif //TWI1_ENABLED +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +#if TWI_CONFIG_LOG_ENABLED +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //TWI_CONFIG_LOG_ENABLED +// </e> + +// <q> TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 anomaly 109 workaround for TWIM. + + +// <i> The workaround uses interrupts to wake up the CPU by catching +// <i> the start event of zero-frequency transmission, clear the +// <i> peripheral, set desired frequency, start the peripheral, and +// <i> the proper transmission. See more in the Errata document or +// <i> Anomaly 109 Addendum located at https://infocenter.nordicsemi.com/ + +#ifndef TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED +#define TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0 +#endif + +#endif //TWI_ENABLED +// </e> + +// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver +//========================================================== +#ifndef UART_ENABLED +#define UART_ENABLED 1 +#endif +#if UART_ENABLED +// <o> UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef UART_DEFAULT_CONFIG_HWFC +#define UART_DEFAULT_CONFIG_HWFC 0 +#endif + +// <o> UART_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef UART_DEFAULT_CONFIG_PARITY +#define UART_DEFAULT_CONFIG_PARITY 0 +#endif + +// <o> UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 57600 baud + +#ifndef UART_DEFAULT_CONFIG_BAUDRATE +#define UART_DEFAULT_CONFIG_BAUDRATE 30801920 +#endif + +// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY +#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 6 +#endif + +// <q> UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA + + +#ifndef UART_EASY_DMA_SUPPORT +#define UART_EASY_DMA_SUPPORT 1 +#endif + +// <q> UART_LEGACY_SUPPORT - Driver supporting Legacy mode + + +#ifndef UART_LEGACY_SUPPORT +#define UART_LEGACY_SUPPORT 1 +#endif + +// <e> UART0_ENABLED - Enable UART0 instance +//========================================================== +#ifndef UART0_ENABLED +#define UART0_ENABLED 1 +#endif +#if UART0_ENABLED +// <q> UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA + + +#ifndef UART0_CONFIG_USE_EASY_DMA +#define UART0_CONFIG_USE_EASY_DMA 1 +#endif + +#endif //UART0_ENABLED +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +#if UART_CONFIG_LOG_ENABLED +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //UART_CONFIG_LOG_ENABLED +// </e> + +#endif //UART_ENABLED +// </e> + +// <e> USBD_ENABLED - nrf_drv_usbd - USB driver +//========================================================== +#ifndef USBD_ENABLED +#define USBD_ENABLED 0 +#endif +#if USBD_ENABLED +// <o> USBD_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef USBD_CONFIG_IRQ_PRIORITY +#define USBD_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> NRF_DRV_USBD_DMASCHEDULER_MODE - USBD SMA scheduler working scheme + +// <0=> Prioritized access +// <1=> Round Robin + +#ifndef NRF_DRV_USBD_DMASCHEDULER_MODE +#define NRF_DRV_USBD_DMASCHEDULER_MODE 0 +#endif + +// <q> NRF_USBD_DRV_LOG_ENABLED - Enable logging + + +#ifndef NRF_USBD_DRV_LOG_ENABLED +#define NRF_USBD_DRV_LOG_ENABLED 0 +#endif + +#endif //USBD_ENABLED +// </e> + +// <e> WDT_ENABLED - nrf_drv_wdt - WDT peripheral driver +//========================================================== +#ifndef WDT_ENABLED +#define WDT_ENABLED 0 +#endif +#if WDT_ENABLED +// <o> WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode + +// <1=> Run in SLEEP, Pause in HALT +// <8=> Pause in SLEEP, Run in HALT +// <9=> Run in SLEEP and HALT +// <0=> Pause in SLEEP and HALT + +#ifndef WDT_CONFIG_BEHAVIOUR +#define WDT_CONFIG_BEHAVIOUR 1 +#endif + +// <o> WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295> + + +#ifndef WDT_CONFIG_RELOAD_VALUE +#define WDT_CONFIG_RELOAD_VALUE 2000 +#endif + +// <o> WDT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef WDT_CONFIG_IRQ_PRIORITY +#define WDT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +#if WDT_CONFIG_LOG_ENABLED +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //WDT_CONFIG_LOG_ENABLED +// </e> + +#endif //WDT_ENABLED +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <q> APP_GPIOTE_ENABLED - app_gpiote - GPIOTE events dispatcher + + +#ifndef APP_GPIOTE_ENABLED +#define APP_GPIOTE_ENABLED 0 +#endif + +// <q> APP_PWM_ENABLED - app_pwm - PWM functionality + + +#ifndef APP_PWM_ENABLED +#define APP_PWM_ENABLED 0 +#endif + +// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler +//========================================================== +#ifndef APP_SCHEDULER_ENABLED +#define APP_SCHEDULER_ENABLED 1 +#endif +#if APP_SCHEDULER_ENABLED +// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature + + +#ifndef APP_SCHEDULER_WITH_PAUSE +#define APP_SCHEDULER_WITH_PAUSE 0 +#endif + +// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling + + +#ifndef APP_SCHEDULER_WITH_PROFILER +#define APP_SCHEDULER_WITH_PROFILER 0 +#endif + +#endif //APP_SCHEDULER_ENABLED +// </e> + +// <e> APP_SDCARD_ENABLED - app_sdcard - SD/MMC card support using SPI +//========================================================== +#ifndef APP_SDCARD_ENABLED +#define APP_SDCARD_ENABLED 0 +#endif +#if APP_SDCARD_ENABLED +// <o> APP_SDCARD_SPI_INSTANCE - SPI instance used + +// <0=> 0 +// <1=> 1 +// <2=> 2 + +#ifndef APP_SDCARD_SPI_INSTANCE +#define APP_SDCARD_SPI_INSTANCE 0 +#endif + +// <o> APP_SDCARD_FREQ_INIT - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef APP_SDCARD_FREQ_INIT +#define APP_SDCARD_FREQ_INIT 67108864 +#endif + +// <o> APP_SDCARD_FREQ_DATA - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef APP_SDCARD_FREQ_DATA +#define APP_SDCARD_FREQ_DATA 1073741824 +#endif + +#endif //APP_SDCARD_ENABLED +// </e> + +// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality +//========================================================== +#ifndef APP_TIMER_ENABLED +#define APP_TIMER_ENABLED 1 +#endif +#if APP_TIMER_ENABLED +// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz + +#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY +#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 +#endif + +// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY +#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// <i> Size of the queue depends on how many timers are used +// <i> in the system, how often timers are started and overall +// <i> system latency. If queue size is too small app_timer calls +// <i> will fail. + +#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE +#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 +#endif + +// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler + + +#ifndef APP_TIMER_CONFIG_USE_SCHEDULER +#define APP_TIMER_CONFIG_USE_SCHEDULER 1 +#endif + +// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on + + +// <i> If option is enabled RTC is kept running even if there is no active timers. +// <i> This option can be used when app_timer is used for timestamping. + +#ifndef APP_TIMER_KEEPS_RTC_ACTIVE +#define APP_TIMER_KEEPS_RTC_ACTIVE 0 +#endif + +// <o> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + +// <0=> 0 +// <1=> 1 + +#ifndef APP_TIMER_CONFIG_SWI_NUMBER +#define APP_TIMER_CONFIG_SWI_NUMBER 0 +#endif + +#endif //APP_TIMER_ENABLED +// </e> + +// <q> APP_TWI_ENABLED - app_twi - TWI transaction manager + + +#ifndef APP_TWI_ENABLED +#define APP_TWI_ENABLED 0 +#endif + +// <q> APP_USBD_CLASS_AUDIO_ENABLED - app_usbd_audio - USB AUDIO class + + +#ifndef APP_USBD_CLASS_AUDIO_ENABLED +#define APP_USBD_CLASS_AUDIO_ENABLED 0 +#endif + +// <q> APP_USBD_CLASS_HID_ENABLED - app_usbd_hid - USB HID class + + +#ifndef APP_USBD_CLASS_HID_ENABLED +#define APP_USBD_CLASS_HID_ENABLED 0 +#endif + +// <q> APP_USBD_HID_GENERIC_ENABLED - app_usbd_hid_generic - USB HID generic + + +#ifndef APP_USBD_HID_GENERIC_ENABLED +#define APP_USBD_HID_GENERIC_ENABLED 0 +#endif + +// <q> APP_USBD_HID_KBD_ENABLED - app_usbd_hid_kbd - USB HID keyboard + + +#ifndef APP_USBD_HID_KBD_ENABLED +#define APP_USBD_HID_KBD_ENABLED 0 +#endif + +// <q> APP_USBD_HID_MOUSE_ENABLED - app_usbd_hid_mouse - USB HID mouse + + +#ifndef APP_USBD_HID_MOUSE_ENABLED +#define APP_USBD_HID_MOUSE_ENABLED 0 +#endif + +// <q> BUTTON_ENABLED - app_button - buttons handling module + + +#ifndef BUTTON_ENABLED +#define BUTTON_ENABLED 1 +#endif + +// <q> CRC16_ENABLED - crc16 - CRC16 calculation routines + + +#ifndef CRC16_ENABLED +#define CRC16_ENABLED 0 +#endif + +// <q> CRC32_ENABLED - crc32 - CRC32 calculation routines + + +#ifndef CRC32_ENABLED +#define CRC32_ENABLED 1 +#endif + +// <q> ECC_ENABLED - ecc - Elliptic Curve Cryptography Library + + +#ifndef ECC_ENABLED +#define ECC_ENABLED 0 +#endif + +// <e> FDS_ENABLED - fds - Flash data storage module +//========================================================== +#ifndef FDS_ENABLED +#define FDS_ENABLED 1 +#endif +#if FDS_ENABLED +// <o> FDS_OP_QUEUE_SIZE - Size of the internal queue. +#ifndef FDS_OP_QUEUE_SIZE +#define FDS_OP_QUEUE_SIZE 6 +#endif + +// <o> FDS_CHUNK_QUEUE_SIZE - Determines how many @ref fds_record_chunk_t structures can be buffered at any time. +#ifndef FDS_CHUNK_QUEUE_SIZE +#define FDS_CHUNK_QUEUE_SIZE 8 +#endif + +// <o> FDS_MAX_USERS - Maximum number of callbacks that can be registered. +#ifndef FDS_MAX_USERS +#define FDS_MAX_USERS 8 +#endif + +// <o> FDS_VIRTUAL_PAGES - Number of virtual flash pages to use. +// <i> One of the virtual pages is reserved by the system for garbage collection. +// <i> Therefore, the minimum is two virtual pages: one page to store data and +// <i> one page to be used by the system for garbage collection. The total amount +// <i> of flash memory that is used by FDS amounts to @ref FDS_VIRTUAL_PAGES +// <i> @ref FDS_VIRTUAL_PAGE_SIZE * 4 bytes. + +#ifndef FDS_VIRTUAL_PAGES +#define FDS_VIRTUAL_PAGES 6 +#endif + +// <o> FDS_VIRTUAL_PAGE_SIZE - The size of a virtual page of flash memory, expressed in number of 4-byte words. + + +// <i> By default, a virtual page is the same size as a physical page. +// <i> The size of a virtual page must be a multiple of the size of a physical page. +// <1024=> 1024 +// <2048=> 2048 + +#ifndef FDS_VIRTUAL_PAGE_SIZE +#define FDS_VIRTUAL_PAGE_SIZE 1024 +#endif + +#endif //FDS_ENABLED +// </e> + +// <e> FSTORAGE_ENABLED - fstorage - Flash storage module +//========================================================== +#ifndef FSTORAGE_ENABLED +#define FSTORAGE_ENABLED 1 +#endif +#if FSTORAGE_ENABLED +// <o> FS_QUEUE_SIZE - Configures the size of the internal queue. +// <i> Increase this if there are many users, or if it is likely that many +// <i> operation will be queued at once without waiting for the previous operations +// <i> to complete. In general, increase the queue size if you frequently receive +// <i> @ref FS_ERR_QUEUE_FULL errors when calling @ref fs_store or @ref fs_erase. + +#ifndef FS_QUEUE_SIZE +#define FS_QUEUE_SIZE 8 +#endif + +// <o> FS_OP_MAX_RETRIES - Number attempts to execute an operation if the SoftDevice fails. +// <i> Increase this value if events return the @ref FS_ERR_OPERATION_TIMEOUT +// <i> error often. The SoftDevice may fail to schedule flash access due to high BLE activity. + +#ifndef FS_OP_MAX_RETRIES +#define FS_OP_MAX_RETRIES 6 +#endif + +// <o> FS_MAX_WRITE_SIZE_WORDS - Maximum number of words to be written to flash in a single operation. +// <i> Tweaking this value can increase the chances of the SoftDevice being +// <i> able to fit flash operations in between radio activity. This value is bound by the +// <i> maximum number of words which the SoftDevice can write to flash in a single call to +// <i> @ref sd_flash_write, which is 256 words for nRF51 ICs and 1024 words for nRF52 ICs. + +#ifndef FS_MAX_WRITE_SIZE_WORDS +#define FS_MAX_WRITE_SIZE_WORDS 1024 +#endif + +#endif //FSTORAGE_ENABLED +// </e> + +// <q> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release + + +#ifndef HARDFAULT_HANDLER_ENABLED +#define HARDFAULT_HANDLER_ENABLED 1 +#endif + +// <e> HCI_MEM_POOL_ENABLED - hci_mem_pool - memory pool implementation used by HCI +//========================================================== +#ifndef HCI_MEM_POOL_ENABLED +#define HCI_MEM_POOL_ENABLED 0 +#endif +#if HCI_MEM_POOL_ENABLED +// <o> HCI_TX_BUF_SIZE - TX buffer size in bytes. +#ifndef HCI_TX_BUF_SIZE +#define HCI_TX_BUF_SIZE 600 +#endif + +// <o> HCI_RX_BUF_SIZE - RX buffer size in bytes. +#ifndef HCI_RX_BUF_SIZE +#define HCI_RX_BUF_SIZE 600 +#endif + +// <o> HCI_RX_BUF_QUEUE_SIZE - RX buffer queue size. +#ifndef HCI_RX_BUF_QUEUE_SIZE +#define HCI_RX_BUF_QUEUE_SIZE 4 +#endif + +#endif //HCI_MEM_POOL_ENABLED +// </e> + +// <e> HCI_SLIP_ENABLED - hci_slip - SLIP protocol implementation used by HCI +//========================================================== +#ifndef HCI_SLIP_ENABLED +#define HCI_SLIP_ENABLED 0 +#endif +#if HCI_SLIP_ENABLED +// <o> HCI_UART_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 57600 baud + +#ifndef HCI_UART_BAUDRATE +#define HCI_UART_BAUDRATE 30801920 +#endif + +// <o> HCI_UART_FLOW_CONTROL - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef HCI_UART_FLOW_CONTROL +#define HCI_UART_FLOW_CONTROL 0 +#endif + +// <o> HCI_UART_RX_PIN - UART RX pin +#ifndef HCI_UART_RX_PIN +#define HCI_UART_RX_PIN 31 +#endif + +// <o> HCI_UART_TX_PIN - UART TX pin +#ifndef HCI_UART_TX_PIN +#define HCI_UART_TX_PIN 31 +#endif + +// <o> HCI_UART_RTS_PIN - UART RTS pin +#ifndef HCI_UART_RTS_PIN +#define HCI_UART_RTS_PIN 31 +#endif + +// <o> HCI_UART_CTS_PIN - UART CTS pin +#ifndef HCI_UART_CTS_PIN +#define HCI_UART_CTS_PIN 31 +#endif + +#endif //HCI_SLIP_ENABLED +// </e> + +// <e> HCI_TRANSPORT_ENABLED - hci_transport - HCI transport +//========================================================== +#ifndef HCI_TRANSPORT_ENABLED +#define HCI_TRANSPORT_ENABLED 0 +#endif +#if HCI_TRANSPORT_ENABLED +// <o> HCI_MAX_PACKET_SIZE_IN_BITS - Maximum size of a single application packet in bits. +#ifndef HCI_MAX_PACKET_SIZE_IN_BITS +#define HCI_MAX_PACKET_SIZE_IN_BITS 8000 +#endif + +#endif //HCI_TRANSPORT_ENABLED +// </e> + +// <q> LED_SOFTBLINK_ENABLED - led_softblink - led_softblink module + + +#ifndef LED_SOFTBLINK_ENABLED +#define LED_SOFTBLINK_ENABLED 0 +#endif + +// <q> LOW_POWER_PWM_ENABLED - low_power_pwm - low_power_pwm module + + +#ifndef LOW_POWER_PWM_ENABLED +#define LOW_POWER_PWM_ENABLED 1 +#endif + +// <e> MEM_MANAGER_ENABLED - mem_manager - Dynamic memory allocator +//========================================================== +#ifndef MEM_MANAGER_ENABLED +#define MEM_MANAGER_ENABLED 0 +#endif +#if MEM_MANAGER_ENABLED +// <o> MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255> + + +#ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT +#define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1 +#endif + +// <o> MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block. +// <i> Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE +#define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32 +#endif + +// <o> MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255> + + +#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT +#define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block. +// <i> Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE +#define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256 +#endif + +// <o> MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255> + + +#ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT +#define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block. +// <i> Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE +#define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256 +#endif + +// <o> MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255> + + +#ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT +#define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block. +// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE +#define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320 +#endif + +// <o> MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255> + + +#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT +#define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block. +// <i> Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE +#define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444 +#endif + +// <o> MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255> + + +#ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT +#define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block. +// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE +#define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64 +#endif + +// <o> MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255> + + +#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT +#define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block. +// <i> Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE +#define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32 +#endif + +// <q> MEM_MANAGER_ENABLE_LOGS - Enable debug trace in the module. + + +#ifndef MEM_MANAGER_ENABLE_LOGS +#define MEM_MANAGER_ENABLE_LOGS 0 +#endif + +// <q> MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module. + + +#ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK +#define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0 +#endif + +#endif //MEM_MANAGER_ENABLED +// </e> + +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 0 +#endif +#if NRF_BALLOC_ENABLED +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +#if NRF_BALLOC_CONFIG_LOG_ENABLED +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //NRF_BALLOC_CONFIG_LOG_ENABLED +// </e> + +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +#if NRF_BALLOC_CONFIG_DEBUG_ENABLED +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_WORDS +#define NRF_BALLOC_CONFIG_TAIL_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +#endif //NRF_BALLOC_CONFIG_DEBUG_ENABLED +// </e> + +#endif //NRF_BALLOC_ENABLED +// </e> + +// <e> NRF_CSENSE_ENABLED - nrf_csense - Capacitive sensor module +//========================================================== +#ifndef NRF_CSENSE_ENABLED +#define NRF_CSENSE_ENABLED 0 +#endif +#if NRF_CSENSE_ENABLED +// <o> NRF_CSENSE_PAD_HYSTERESIS - Minimum value of change required to determine that a pad was touched. +#ifndef NRF_CSENSE_PAD_HYSTERESIS +#define NRF_CSENSE_PAD_HYSTERESIS 15 +#endif + +// <o> NRF_CSENSE_PAD_DEVIATION - Minimum value measured on a pad required to take it into account while calculating the step. +#ifndef NRF_CSENSE_PAD_DEVIATION +#define NRF_CSENSE_PAD_DEVIATION 70 +#endif + +// <o> NRF_CSENSE_MIN_PAD_VALUE - Minimum normalized value on a pad required to take its value into account. +#ifndef NRF_CSENSE_MIN_PAD_VALUE +#define NRF_CSENSE_MIN_PAD_VALUE 20 +#endif + +// <o> NRF_CSENSE_MAX_PADS_NUMBER - Maximum number of pads used for one instance. +#ifndef NRF_CSENSE_MAX_PADS_NUMBER +#define NRF_CSENSE_MAX_PADS_NUMBER 20 +#endif + +// <o> NRF_CSENSE_MAX_VALUE - Maximum normalized value obtained from measurement. +#ifndef NRF_CSENSE_MAX_VALUE +#define NRF_CSENSE_MAX_VALUE 1000 +#endif + +// <o> NRF_CSENSE_OUTPUT_PIN - Output pin used by the low-level module. +// <i> This is used when capacitive sensor does not use COMP. + +#ifndef NRF_CSENSE_OUTPUT_PIN +#define NRF_CSENSE_OUTPUT_PIN 26 +#endif + +#endif //NRF_CSENSE_ENABLED +// </e> + +// <e> NRF_DRV_CSENSE_ENABLED - nrf_drv_csense - Capacitive sensor low-level module +//========================================================== +#ifndef NRF_DRV_CSENSE_ENABLED +#define NRF_DRV_CSENSE_ENABLED 0 +#endif +#if NRF_DRV_CSENSE_ENABLED +// <e> USE_COMP - Use the comparator to implement the capacitive sensor driver. + +// <i> Due to Anomaly 84, COMP I_SOURCE is not functional. It has too high a varation. +//========================================================== +#ifndef USE_COMP +#define USE_COMP 0 +#endif +#if USE_COMP +// <o> TIMER0_FOR_CSENSE - First TIMER instance used by the driver (not used on nRF51). +#ifndef TIMER0_FOR_CSENSE +#define TIMER0_FOR_CSENSE 1 +#endif + +// <o> TIMER1_FOR_CSENSE - Second TIMER instance used by the driver (not used on nRF51). +#ifndef TIMER1_FOR_CSENSE +#define TIMER1_FOR_CSENSE 2 +#endif + +// <o> MEASUREMENT_PERIOD - Single measurement period. +// <i> Time of a single measurement can be calculated as +// <i> T = (1/2)*MEASUREMENT_PERIOD*(1/f_OSC) where f_OSC = I_SOURCE / (2C*(VUP-VDOWN) ). +// <i> I_SOURCE, VUP, and VDOWN are values used to initialize COMP and C is the capacitance of the used pad. + +#ifndef MEASUREMENT_PERIOD +#define MEASUREMENT_PERIOD 20 +#endif + +#endif //USE_COMP +// </e> + +#endif //NRF_DRV_CSENSE_ENABLED +// </e> + +// <q> NRF_GFX_ENABLED - nrf_gfx - GFX module + + +#ifndef NRF_GFX_ENABLED +#define NRF_GFX_ENABLED 0 +#endif + +// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module +//========================================================== +#ifndef NRF_PWR_MGMT_ENABLED +#define NRF_PWR_MGMT_ENABLED 0 +#endif +#if NRF_PWR_MGMT_ENABLED +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +#if NRF_PWR_MGMT_CONFIG_LOG_ENABLED +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //NRF_PWR_MGMT_CONFIG_LOG_ENABLED +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module. + +// <i> Selected pin will be set when CPU is in sleep mode. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED +#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0 +#endif +#if NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED +// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN - Pin number + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <4294967295=> Not connected + +#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN +#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31 +#endif + +#endif //NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED +// </e> + +// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED - Enables CPU usage monitor. + + +// <i> Module will trace percentage of CPU usage in one second intervals. + +#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED +#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0 +#endif + +// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED +#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0 +#endif +#if NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED +// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds). +// <i> Shutdown procedure will begin no earlier than after this number of seconds. + +#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S +#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3 +#endif + +#endif //NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED +// </e> + +// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED - Enables FPU event cleaning. + + +#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED +#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 0 +#endif + +// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY - Blocked shutdown procedure will be retried every second. + + +#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY +#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0 +#endif + +// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER - Module will use @ref app_scheduler. + + +#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER +#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers. +// <i> The number of stages of the shutdown process. + +#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT +#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3 +#endif + +#endif //NRF_PWR_MGMT_ENABLED +// </e> + +// <q> NRF_QUEUE_ENABLED - nrf_queue - Queue module + + +#ifndef NRF_QUEUE_ENABLED +#define NRF_QUEUE_ENABLED 1 +#endif + +// <q> NRF_SERIAL_ENABLED - nrf_serial - Serial port interface + + +#ifndef NRF_SERIAL_ENABLED +#define NRF_SERIAL_ENABLED 0 +#endif + +// <q> NRF_SPI_MNGR_ENABLED - nrf_spi_mngr - SPI transaction manager + + +#ifndef NRF_SPI_MNGR_ENABLED +#define NRF_SPI_MNGR_ENABLED 0 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// <q> SLIP_ENABLED - slip - SLIP encoding and decoding + + +#ifndef SLIP_ENABLED +#define SLIP_ENABLED 1 +#endif + +// <h> app_usbd_cdc_acm - USB CDC ACM class + +//========================================================== +// <q> APP_USBD_CLASS_CDC_ACM_ENABLED - Enabling USBD CDC ACM Class library + + +#ifndef APP_USBD_CLASS_CDC_ACM_ENABLED +#define APP_USBD_CLASS_CDC_ACM_ENABLED 0 +#endif + +// <q> APP_USBD_CDC_ACM_LOG_ENABLED - Enables logging in the module. + + +#ifndef APP_USBD_CDC_ACM_LOG_ENABLED +#define APP_USBD_CDC_ACM_LOG_ENABLED 0 +#endif + +// </h> +//========================================================== + +// <h> app_usbd_msc - USB MSC class + +//========================================================== +// <q> APP_USBD_CLASS_MSC_ENABLED - Enabling USBD MSC Class library + + +#ifndef APP_USBD_CLASS_MSC_ENABLED +#define APP_USBD_CLASS_MSC_ENABLED 0 +#endif + +// <q> APP_USBD_MSC_CLASS_LOG_ENABLED - Enables logging in the module. + + +#ifndef APP_USBD_MSC_CLASS_LOG_ENABLED +#define APP_USBD_MSC_CLASS_LOG_ENABLED 0 +#endif + +// </h> +//========================================================== + +// <h> nrf_cli - Command line interface. + +//========================================================== +// <q> NRF_CLI_ENABLED - Enable/disable CLI module. + + +#ifndef NRF_CLI_ENABLED +#define NRF_CLI_ENABLED 0 +#endif + +// <o> NRF_CLI_ARGC_MAX - Maximum number of parameters passed to command handler. +#ifndef NRF_CLI_ARGC_MAX +#define NRF_CLI_ARGC_MAX 12 +#endif + +// <o> NRF_CLI_CMD_BUFF_SIZE - Maximum buffer size for single command. +#ifndef NRF_CLI_CMD_BUFF_SIZE +#define NRF_CLI_CMD_BUFF_SIZE 48 +#endif + +// <o> NRF_CLI_HISTORY_COUNT - Number of entries in cli history (0 -> history disabled). +#ifndef NRF_CLI_HISTORY_COUNT +#define NRF_CLI_HISTORY_COUNT 8 +#endif + +// <o> NRF_CLI_PRINTF_BUFF_SIZE - Maximum buffer size for single printf. +#ifndef NRF_CLI_PRINTF_BUFF_SIZE +#define NRF_CLI_PRINTF_BUFF_SIZE 128 +#endif + +// <o> NRF_CLI_VT100_COLORS - CLI colors enable/disable. +#ifndef NRF_CLI_VT100_COLORS +#define NRF_CLI_VT100_COLORS 1 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <e> NRF_LOG_ENABLED - nrf_log - Logging +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 0 +#endif +#if NRF_LOG_ENABLED +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 1 +#endif +#if NRF_LOG_USES_COLORS +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +#endif //NRF_LOG_USES_COLORS +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <e> NRF_LOG_DEFERRED - Enable deffered logger. + +// <i> Log data is buffered and can be processed in idle. +//========================================================== +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 0 +#endif +#if NRF_LOG_DEFERRED +// <o> NRF_LOG_DEFERRED_BUFSIZE - Size of the buffer for logs in words. +// <i> Must be power of 2 + +#ifndef NRF_LOG_DEFERRED_BUFSIZE +#define NRF_LOG_DEFERRED_BUFSIZE 256 +#endif + +#endif //NRF_LOG_DEFERRED +// </e> + +// <q> NRF_LOG_USES_TIMESTAMP - Enable timestamping + + +// <i> Function for getting the timestamp is provided by the user + +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif + +#endif //NRF_LOG_ENABLED +// </e> + +// <h> nrf_log_backend - Logging sink + +//========================================================== +// <o> NRF_LOG_BACKEND_MAX_STRING_LENGTH - Buffer for storing single output string +// <i> Logger backend RAM usage is determined by this value. + +#ifndef NRF_LOG_BACKEND_MAX_STRING_LENGTH +#define NRF_LOG_BACKEND_MAX_STRING_LENGTH 256 +#endif + +// <o> NRF_LOG_TIMESTAMP_DIGITS - Number of digits for timestamp +// <i> If higher resolution timestamp source is used it might be needed to increase that + +#ifndef NRF_LOG_TIMESTAMP_DIGITS +#define NRF_LOG_TIMESTAMP_DIGITS 8 +#endif + +// <e> NRF_LOG_BACKEND_SERIAL_USES_UART - If enabled data is printed over UART +//========================================================== +#ifndef NRF_LOG_BACKEND_SERIAL_USES_UART +#define NRF_LOG_BACKEND_SERIAL_USES_UART 0 +#endif +#if NRF_LOG_BACKEND_SERIAL_USES_UART +// <o> NRF_LOG_BACKEND_SERIAL_UART_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 57600 baud + +#ifndef NRF_LOG_BACKEND_SERIAL_UART_BAUDRATE +#define NRF_LOG_BACKEND_SERIAL_UART_BAUDRATE 30801920 +#endif + +// <o> NRF_LOG_BACKEND_SERIAL_UART_TX_PIN - UART TX pin +#ifndef NRF_LOG_BACKEND_SERIAL_UART_TX_PIN +#define NRF_LOG_BACKEND_SERIAL_UART_TX_PIN 31 +#endif + +// <o> NRF_LOG_BACKEND_SERIAL_UART_RX_PIN - UART RX pin +#ifndef NRF_LOG_BACKEND_SERIAL_UART_RX_PIN +#define NRF_LOG_BACKEND_SERIAL_UART_RX_PIN 31 +#endif + +// <o> NRF_LOG_BACKEND_SERIAL_UART_RTS_PIN - UART RTS pin +#ifndef NRF_LOG_BACKEND_SERIAL_UART_RTS_PIN +#define NRF_LOG_BACKEND_SERIAL_UART_RTS_PIN 31 +#endif + +// <o> NRF_LOG_BACKEND_SERIAL_UART_CTS_PIN - UART CTS pin +#ifndef NRF_LOG_BACKEND_SERIAL_UART_CTS_PIN +#define NRF_LOG_BACKEND_SERIAL_UART_CTS_PIN 31 +#endif + +// <o> NRF_LOG_BACKEND_SERIAL_UART_FLOW_CONTROL - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRF_LOG_BACKEND_SERIAL_UART_FLOW_CONTROL +#define NRF_LOG_BACKEND_SERIAL_UART_FLOW_CONTROL 0 +#endif + +// <o> NRF_LOG_BACKEND_UART_INSTANCE - UART instance used + +// <0=> 0 + +#ifndef NRF_LOG_BACKEND_UART_INSTANCE +#define NRF_LOG_BACKEND_UART_INSTANCE 0 +#endif + +#endif //NRF_LOG_BACKEND_SERIAL_USES_UART +// </e> + +// <e> NRF_LOG_BACKEND_SERIAL_USES_RTT - If enabled data is printed using RTT +//========================================================== +#ifndef NRF_LOG_BACKEND_SERIAL_USES_RTT +#define NRF_LOG_BACKEND_SERIAL_USES_RTT 1 +#endif +#if NRF_LOG_BACKEND_SERIAL_USES_RTT +// <o> NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE - RTT output buffer size. +// <i> Should be equal or bigger than \ref NRF_LOG_BACKEND_MAX_STRING_LENGTH. +// <i> This value is used in Segger RTT configuration to set the buffer size +// <i> if it is bigger than default RTT buffer size. + +#ifndef NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE 2048 +#endif + +#endif //NRF_LOG_BACKEND_SERIAL_USES_RTT +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_NFC + +//========================================================== +// <e> NFC_BLE_PAIR_LIB_ENABLED - nfc_ble_pair_lib - Library parameters +//========================================================== +#ifndef NFC_BLE_PAIR_LIB_ENABLED +#define NFC_BLE_PAIR_LIB_ENABLED 0 +#endif +#if NFC_BLE_PAIR_LIB_ENABLED +// <e> NFC_BLE_PAIR_LIB_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_BLE_PAIR_LIB_LOG_ENABLED +#define NFC_BLE_PAIR_LIB_LOG_ENABLED 0 +#endif +#if NFC_BLE_PAIR_LIB_LOG_ENABLED +// <o> NFC_BLE_PAIR_LIB_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_BLE_PAIR_LIB_LOG_LEVEL +#define NFC_BLE_PAIR_LIB_LOG_LEVEL 3 +#endif + +// <o> NFC_BLE_PAIR_LIB_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_BLE_PAIR_LIB_INFO_COLOR +#define NFC_BLE_PAIR_LIB_INFO_COLOR 0 +#endif + +// <o> NFC_BLE_PAIR_LIB_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_BLE_PAIR_LIB_DEBUG_COLOR +#define NFC_BLE_PAIR_LIB_DEBUG_COLOR 0 +#endif + +#endif //NFC_BLE_PAIR_LIB_LOG_ENABLED +// </e> + +// <h> NFC_BLE_PAIR_LIB_SECURITY_PARAMETERS - Common Peer Manager security parameters. + +//========================================================== +// <e> BLE_NFC_SEC_PARAM_BOND - Enables device bonding. + +// <i> If bonding is enabled at least one of the BLE_NFC_SEC_PARAM_KDIST options must be enabled. +//========================================================== +#ifndef BLE_NFC_SEC_PARAM_BOND +#define BLE_NFC_SEC_PARAM_BOND 1 +#endif +#if BLE_NFC_SEC_PARAM_BOND +// <q> BLE_NFC_SEC_PARAM_KDIST_OWN_ENC - Enables Long Term Key and Master Identification distribution by device. + + +#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ENC +#define BLE_NFC_SEC_PARAM_KDIST_OWN_ENC 1 +#endif + +// <q> BLE_NFC_SEC_PARAM_KDIST_OWN_ID - Enables Identity Resolving Key and Identity Address Information distribution by device. + + +#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ID +#define BLE_NFC_SEC_PARAM_KDIST_OWN_ID 1 +#endif + +// <q> BLE_NFC_SEC_PARAM_KDIST_PEER_ENC - Enables Long Term Key and Master Identification distribution by peer. + + +#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ENC +#define BLE_NFC_SEC_PARAM_KDIST_PEER_ENC 1 +#endif + +// <q> BLE_NFC_SEC_PARAM_KDIST_PEER_ID - Enables Identity Resolving Key and Identity Address Information distribution by peer. + + +#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ID +#define BLE_NFC_SEC_PARAM_KDIST_PEER_ID 1 +#endif + +#endif //BLE_NFC_SEC_PARAM_BOND +// </e> + +// <o> BLE_NFC_SEC_PARAM_MIN_KEY_SIZE - Minimal size of a security key. + +// <7=> 7 +// <8=> 8 +// <9=> 9 +// <10=> 10 +// <11=> 11 +// <12=> 12 +// <13=> 13 +// <14=> 14 +// <15=> 15 +// <16=> 16 + +#ifndef BLE_NFC_SEC_PARAM_MIN_KEY_SIZE +#define BLE_NFC_SEC_PARAM_MIN_KEY_SIZE 7 +#endif + +// <o> BLE_NFC_SEC_PARAM_MAX_KEY_SIZE - Maximal size of a security key. + +// <7=> 7 +// <8=> 8 +// <9=> 9 +// <10=> 10 +// <11=> 11 +// <12=> 12 +// <13=> 13 +// <14=> 14 +// <15=> 15 +// <16=> 16 + +#ifndef BLE_NFC_SEC_PARAM_MAX_KEY_SIZE +#define BLE_NFC_SEC_PARAM_MAX_KEY_SIZE 16 +#endif + +// </h> +//========================================================== + +#endif //NFC_BLE_PAIR_LIB_ENABLED +// </e> + +// NFC_HAL_ENABLED - nfc_t4t_hal - Hardware Abstraction Layer for NFC library. +//========================================================== +// nfc_t4t_hal removed to define NFC_HAL_ENABLED in nfc_t2t_hal instead. + +// <e> NFC_HAL_ENABLED - nfc_t2t_hal - Hardware Abstraction Layer for NFC library. +//========================================================== +#ifndef NFC_HAL_ENABLED +#define NFC_HAL_ENABLED 1 +#endif +#if NFC_HAL_ENABLED +// <o> NFCT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NFCT_CONFIG_IRQ_PRIORITY +#define NFCT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> HAL_NFC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef HAL_NFC_CONFIG_LOG_ENABLED +#define HAL_NFC_CONFIG_LOG_ENABLED 0 +#endif +#if HAL_NFC_CONFIG_LOG_ENABLED +// <o> HAL_NFC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef HAL_NFC_CONFIG_LOG_LEVEL +#define HAL_NFC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> HAL_NFC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef HAL_NFC_CONFIG_INFO_COLOR +#define HAL_NFC_CONFIG_INFO_COLOR 0 +#endif + +// <o> HAL_NFC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef HAL_NFC_CONFIG_DEBUG_COLOR +#define HAL_NFC_CONFIG_DEBUG_COLOR 0 +#endif + +#endif //HAL_NFC_CONFIG_LOG_ENABLED +// </e> + +// <e> HAL_NFC_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module. +//========================================================== +#ifndef HAL_NFC_CONFIG_DEBUG_PIN_ENABLED +#define HAL_NFC_CONFIG_DEBUG_PIN_ENABLED 0 +#endif +#if HAL_NFC_CONFIG_DEBUG_PIN_ENABLED +// <o> HAL_NFC_HCLOCK_ON_DEBUG_PIN - Pin number + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <4294967295=> Not connected + +#ifndef HAL_NFC_HCLOCK_ON_DEBUG_PIN +#define HAL_NFC_HCLOCK_ON_DEBUG_PIN 31 +#endif + +// <o> HAL_NFC_HCLOCK_OFF_DEBUG_PIN - Pin number + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <4294967295=> Not connected + +#ifndef HAL_NFC_HCLOCK_OFF_DEBUG_PIN +#define HAL_NFC_HCLOCK_OFF_DEBUG_PIN 31 +#endif + +// <o> HAL_NFC_NFC_EVENT_DEBUG_PIN - Pin number + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <4294967295=> Not connected + +#ifndef HAL_NFC_NFC_EVENT_DEBUG_PIN +#define HAL_NFC_NFC_EVENT_DEBUG_PIN 31 +#endif + +// <o> HAL_NFC_DETECT_EVENT_DEBUG_PIN - Pin number + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <4294967295=> Not connected + +#ifndef HAL_NFC_DETECT_EVENT_DEBUG_PIN +#define HAL_NFC_DETECT_EVENT_DEBUG_PIN 31 +#endif + +// <o> HAL_NFC_TIMER4_EVENT_DEBUG_PIN - Pin number + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <4294967295=> Not connected + +#ifndef HAL_NFC_TIMER4_EVENT_DEBUG_PIN +#define HAL_NFC_TIMER4_EVENT_DEBUG_PIN 31 +#endif + +#endif //HAL_NFC_CONFIG_DEBUG_PIN_ENABLED +// </e> + +#endif //NFC_HAL_ENABLED +// </e> + +// <e> NFC_NDEF_MSG_ENABLED - nfc_ndef_msg - NFC NDEF Message generator module +//========================================================== +#ifndef NFC_NDEF_MSG_ENABLED +#define NFC_NDEF_MSG_ENABLED 1 +#endif +#if NFC_NDEF_MSG_ENABLED +// <o> NFC_NDEF_MSG_TAG_TYPE - NFC Tag Type + +// <2=> Type 2 Tag +// <4=> Type 4 Tag + +#ifndef NFC_NDEF_MSG_TAG_TYPE +#define NFC_NDEF_MSG_TAG_TYPE 2 +#endif + +#endif //NFC_NDEF_MSG_ENABLED +// </e> + +// <e> NFC_NDEF_MSG_PARSER_ENABLED - nfc_ndef_msg_parser - NFC NDEF message parser module +//========================================================== +#ifndef NFC_NDEF_MSG_PARSER_ENABLED +#define NFC_NDEF_MSG_PARSER_ENABLED 0 +#endif +#if NFC_NDEF_MSG_PARSER_ENABLED +// <e> NFC_NDEF_MSG_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_NDEF_MSG_PARSER_LOG_ENABLED +#define NFC_NDEF_MSG_PARSER_LOG_ENABLED 0 +#endif +#if NFC_NDEF_MSG_PARSER_LOG_ENABLED +// <o> NFC_NDEF_MSG_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_NDEF_MSG_PARSER_LOG_LEVEL +#define NFC_NDEF_MSG_PARSER_LOG_LEVEL 3 +#endif + +// <o> NFC_NDEF_MSG_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_NDEF_MSG_PARSER_INFO_COLOR +#define NFC_NDEF_MSG_PARSER_INFO_COLOR 0 +#endif + +#endif //NFC_NDEF_MSG_PARSER_LOG_ENABLED +// </e> + +#endif //NFC_NDEF_MSG_PARSER_ENABLED +// </e> + +// <e> NFC_NDEF_RECORD_PARSER_ENABLED - nfc_ndef_record_parser - NFC NDEF Record parser module +//========================================================== +#ifndef NFC_NDEF_RECORD_PARSER_ENABLED +#define NFC_NDEF_RECORD_PARSER_ENABLED 0 +#endif +#if NFC_NDEF_RECORD_PARSER_ENABLED +// <e> NFC_NDEF_RECORD_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_NDEF_RECORD_PARSER_LOG_ENABLED +#define NFC_NDEF_RECORD_PARSER_LOG_ENABLED 0 +#endif +#if NFC_NDEF_RECORD_PARSER_LOG_ENABLED +// <o> NFC_NDEF_RECORD_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_NDEF_RECORD_PARSER_LOG_LEVEL +#define NFC_NDEF_RECORD_PARSER_LOG_LEVEL 3 +#endif + +// <o> NFC_NDEF_RECORD_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_NDEF_RECORD_PARSER_INFO_COLOR +#define NFC_NDEF_RECORD_PARSER_INFO_COLOR 0 +#endif + +#endif //NFC_NDEF_RECORD_PARSER_LOG_ENABLED +// </e> + +#endif //NFC_NDEF_RECORD_PARSER_ENABLED +// </e> + +// <e> NFC_T2T_PARSER_ENABLED - nfc_type_2_tag_parser - Parser for decoding Type 2 Tag data +//========================================================== +#ifndef NFC_T2T_PARSER_ENABLED +#define NFC_T2T_PARSER_ENABLED 0 +#endif +#if NFC_T2T_PARSER_ENABLED +// <e> NFC_T2T_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T2T_PARSER_LOG_ENABLED +#define NFC_T2T_PARSER_LOG_ENABLED 0 +#endif +#if NFC_T2T_PARSER_LOG_ENABLED +// <o> NFC_T2T_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T2T_PARSER_LOG_LEVEL +#define NFC_T2T_PARSER_LOG_LEVEL 3 +#endif + +// <o> NFC_T2T_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T2T_PARSER_INFO_COLOR +#define NFC_T2T_PARSER_INFO_COLOR 0 +#endif + +#endif //NFC_T2T_PARSER_LOG_ENABLED +// </e> + +#endif //NFC_T2T_PARSER_ENABLED +// </e> + +// <e> NFC_T4T_APDU_ENABLED - nfc_t4t_apdu - APDU encoder/decoder for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_APDU_ENABLED +#define NFC_T4T_APDU_ENABLED 0 +#endif +#if NFC_T4T_APDU_ENABLED +// <e> NFC_T4T_APDU_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_APDU_LOG_ENABLED +#define NFC_T4T_APDU_LOG_ENABLED 0 +#endif +#if NFC_T4T_APDU_LOG_ENABLED +// <o> NFC_T4T_APDU_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_APDU_LOG_LEVEL +#define NFC_T4T_APDU_LOG_LEVEL 3 +#endif + +// <o> NFC_T4T_APDU_LOG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_APDU_LOG_COLOR +#define NFC_T4T_APDU_LOG_COLOR 0 +#endif + +#endif //NFC_T4T_APDU_LOG_ENABLED +// </e> + +#endif //NFC_T4T_APDU_ENABLED +// </e> + +// <e> NFC_T4T_CC_FILE_PARSER_ENABLED - nfc_t4t_cc_file - Capability Container file for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_CC_FILE_PARSER_ENABLED +#define NFC_T4T_CC_FILE_PARSER_ENABLED 0 +#endif +#if NFC_T4T_CC_FILE_PARSER_ENABLED +// <e> NFC_T4T_CC_FILE_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_CC_FILE_PARSER_LOG_ENABLED +#define NFC_T4T_CC_FILE_PARSER_LOG_ENABLED 0 +#endif +#if NFC_T4T_CC_FILE_PARSER_LOG_ENABLED +// <o> NFC_T4T_CC_FILE_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_CC_FILE_PARSER_LOG_LEVEL +#define NFC_T4T_CC_FILE_PARSER_LOG_LEVEL 3 +#endif + +// <o> NFC_T4T_CC_FILE_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_CC_FILE_PARSER_INFO_COLOR +#define NFC_T4T_CC_FILE_PARSER_INFO_COLOR 0 +#endif + +#endif //NFC_T4T_CC_FILE_PARSER_LOG_ENABLED +// </e> + +#endif //NFC_T4T_CC_FILE_PARSER_ENABLED +// </e> + +// <e> NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED - nfc_t4t_hl_detection_procedures - NDEF Detection Procedure for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED +#define NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED 0 +#endif +#if NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED +// <e> NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED +#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED 0 +#endif +#if NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED +// <o> NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL +#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL 3 +#endif + +// <o> NFC_T4T_HL_DETECTION_PROCEDURES_LOG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_COLOR +#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_COLOR 0 +#endif + +#endif //NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED +// </e> + +// <o> APDU_BUFF_SIZE - Size (in bytes) of the buffer for APDU storage +#ifndef APDU_BUFF_SIZE +#define APDU_BUFF_SIZE 250 +#endif + +// <o> CC_STORAGE_BUFF_SIZE - Size (in bytes) of the buffer for CC file storage +#ifndef CC_STORAGE_BUFF_SIZE +#define CC_STORAGE_BUFF_SIZE 64 +#endif + +#endif //NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED +// </e> + +// <e> NFC_T4T_TLV_BLOCK_PARSER_ENABLED - nfc_t4t_tlv_block - TLV block for Type 4 Tag +//========================================================== +#ifndef NFC_T4T_TLV_BLOCK_PARSER_ENABLED +#define NFC_T4T_TLV_BLOCK_PARSER_ENABLED 0 +#endif +#if NFC_T4T_TLV_BLOCK_PARSER_ENABLED +// <e> NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED +#define NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED 0 +#endif +#if NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED +// <o> NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL +#define NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL 3 +#endif + +// <o> NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR +#define NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR 0 +#endif + +#endif //NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED +// </e> + +#endif //NFC_T4T_TLV_BLOCK_PARSER_ENABLED +// </e> + +// </h> +//========================================================== + +// <h> nRF_Segger_RTT + +//========================================================== +// <h> segger_rtt - SEGGER RTT + +//========================================================== +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// <i> or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 64 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// <i> The following modes are supported: +// <i> - SKIP - Do not block, output nothing. +// <i> - TRIM - Do not block, output as much as fits. +// <i> - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + |