You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

313 lines
11 KiB
C

/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file hal_serial.h
* @brief Serial Driver macros and structures.
*
* @addtogroup SERIAL
* @{
*/
#ifndef HAL_SERIAL_H
#define HAL_SERIAL_H
#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @name Serial status flags
* @{
*/
#define SD_PARITY_ERROR (eventflags_t)32 /**< @brief Parity. */
#define SD_FRAMING_ERROR (eventflags_t)64 /**< @brief Framing. */
#define SD_OVERRUN_ERROR (eventflags_t)128 /**< @brief Overflow. */
#define SD_NOISE_ERROR (eventflags_t)256 /**< @brief Line noise. */
#define SD_BREAK_DETECTED (eventflags_t)512 /**< @brief LIN Break. */
#define SD_QUEUE_FULL_ERROR (eventflags_t)1024 /**< @brief Queue full. */
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Serial configuration options
* @{
*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 16 bytes for both the transmission and receive
* buffers.
* @note This is a global setting and it can be overridden by low level
* driver specific settings.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Driver state machine possible states.
*/
typedef enum {
SD_UNINIT = 0, /**< Not initialized. */
SD_STOP = 1, /**< Stopped. */
SD_READY = 2 /**< Ready. */
} sdstate_t;
/**
* @brief Structure representing a serial driver.
*/
typedef struct SerialDriver SerialDriver;
#include "hal_serial_lld.h"
/**
* @brief @p SerialDriver specific methods.
*/
#define _serial_driver_methods \
_base_asynchronous_channel_methods
/**
* @extends BaseAsynchronousChannelVMT
*
* @brief @p SerialDriver virtual methods table.
*/
struct SerialDriverVMT {
_serial_driver_methods
};
/**
* @extends BaseAsynchronousChannel
*
* @brief Full duplex serial driver class.
* @details This class extends @p BaseAsynchronousChannel by adding physical
* I/O queues.
*/
struct SerialDriver {
/** @brief Virtual Methods Table.*/
const struct SerialDriverVMT *vmt;
_serial_driver_data
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @name Macro Functions
* @{
*/
/**
* @brief Direct write to a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* writes directly on the output queue. This is faster but cannot
* be used to write to different channels implementations.
*
* @iclass
*/
#define sdPutI(sdp, b) oqPutI(&(sdp)->oqueue, b)
/**
* @brief Direct write to a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* writes directly on the output queue. This is faster but cannot
* be used to write to different channels implementations.
*
* @api
*/
#define sdPut(sdp, b) oqPut(&(sdp)->oqueue, b)
/**
* @brief Direct write to a @p SerialDriver with timeout specification.
* @note This function bypasses the indirect access to the channel and
* writes directly on the output queue. This is faster but cannot
* be used to write to different channels implementations.
*
* @api
*/
#define sdPutTimeout(sdp, b, t) oqPutTimeout(&(sdp)->oqueue, b, t)
/**
* @brief Direct read from a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @iclass
*/
#define sdGetI(sdp) iqGetI(&(sdp)->iqueue)
/**
* @brief Direct read from a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @api
*/
#define sdGet(sdp) iqGet(&(sdp)->iqueue)
/**
* @brief Direct read from a @p SerialDriver with timeout specification.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @api
*/
#define sdGetTimeout(sdp, t) iqGetTimeout(&(sdp)->iqueue, t)
/**
* @brief Direct blocking write to a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* writes directly to the output queue. This is faster but cannot
* be used to write from different channels implementations.
*
* @iclass
*/
#define sdWriteI(sdp, b, n) oqWriteI(&(sdp)->oqueue, b, n)
/**
* @brief Direct blocking write to a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* writes directly to the output queue. This is faster but cannot
* be used to write from different channels implementations.
*
* @api
*/
#define sdWrite(sdp, b, n) oqWriteTimeout(&(sdp)->oqueue, b, n, TIME_INFINITE)
/**
* @brief Direct blocking write to a @p SerialDriver with timeout
* specification.
* @note This function bypasses the indirect access to the channel and
* writes directly to the output queue. This is faster but cannot
* be used to write to different channels implementations.
*
* @api
*/
#define sdWriteTimeout(sdp, b, n, t) \
oqWriteTimeout(&(sdp)->oqueue, b, n, t)
/**
* @brief Direct non-blocking write to a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* writes directly to the output queue. This is faster but cannot
* be used to write to different channels implementations.
*
* @api
*/
#define sdAsynchronousWrite(sdp, b, n) \
oqWriteTimeout(&(sdp)->oqueue, b, n, TIME_IMMEDIATE)
/**
* @brief Direct blocking read from a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @iclass
*/
#define sdReadI(sdp, b, n) iqReadI(&(sdp)->iqueue, b, n, TIME_INFINITE)
/**
* @brief Direct blocking read from a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @api
*/
#define sdRead(sdp, b, n) iqReadTimeout(&(sdp)->iqueue, b, n, TIME_INFINITE)
/**
* @brief Direct blocking read from a @p SerialDriver with timeout
* specification.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @api
*/
#define sdReadTimeout(sdp, b, n, t) iqReadTimeout(&(sdp)->iqueue, b, n, t)
/**
* @brief Direct non-blocking read from a @p SerialDriver.
* @note This function bypasses the indirect access to the channel and
* reads directly from the input queue. This is faster but cannot
* be used to read from different channels implementations.
*
* @api
*/
#define sdAsynchronousRead(sdp, b, n) \
iqReadTimeout(&(sdp)->iqueue, b, n, TIME_IMMEDIATE)
/** @} */
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#ifdef __cplusplus
extern "C" {
#endif
void sdInit(void);
#if !defined(SERIAL_ADVANCED_BUFFERING_SUPPORT) || \
(SERIAL_ADVANCED_BUFFERING_SUPPORT == FALSE)
void sdObjectInit(SerialDriver *sdp, qnotify_t inotify, qnotify_t onotify);
#else
void sdObjectInit(SerialDriver *sdp);
#endif
void sdStart(SerialDriver *sdp, const SerialConfig *config);
void sdStop(SerialDriver *sdp);
void sdIncomingDataI(SerialDriver *sdp, uint8_t b);
msg_t sdRequestDataI(SerialDriver *sdp);
bool sdPutWouldBlock(SerialDriver *sdp);
bool sdGetWouldBlock(SerialDriver *sdp);
msg_t sdControl(SerialDriver *sdp, unsigned int operation, void *arg);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_SERIAL == TRUE */
#endif /* HAL_SERIAL_H */
/** @} */