You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

782 lines
24 KiB
C

/*
ChibiOS - Copyright (C) 2016..2019 Rocco Marco Guglielmi
This file is part of ChibiOS.
ChibiOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file hts221.c
* @brief HTS221 MEMS interface module code.
*
* @addtogroup HTS221
* @ingroup EX_ST
* @{
*/
#include "hal.h"
#include "hts221.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#define HTS221_SEL(mask, offset) (int16_t)(mask << offset)
#define HTS221_FLAG_HYGRO_BIAS 0x01
#define HTS221_FLAG_HYGRO_SENS 0x02
#define HTS221_FLAG_THERMO_BIAS 0x04
#define HTS221_FLAG_THERMO_SENS 0x08
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
#if (HTS221_USE_I2C) || defined(__DOXYGEN__)
/**
* @brief Reads registers value using I2C.
* @pre The I2C interface must be initialized and the driver started.
*
* @param[in] i2cp pointer to the I2C interface
* @param[in] reg first sub-register address
* @param[out] rxbuf pointer to an output buffer
* @param[in] n number of consecutive register to read
* @return the operation status.
*
* @notapi
*/
static msg_t hts221I2CReadRegister(I2CDriver *i2cp, uint8_t reg, uint8_t* rxbuf,
size_t n) {
uint8_t txbuf = reg;
if (n > 1)
txbuf |= HTS221_SUB_MS;
return i2cMasterTransmitTimeout(i2cp, HTS221_SAD, &txbuf, 1, rxbuf, n,
TIME_INFINITE);
}
/**
* @brief Writes a value into a register using I2C.
* @pre The I2C interface must be initialized and the driver started.
*
* @param[in] i2cp pointer to the I2C interface
* @param[in] txbuf buffer containing sub-address value in first position
* and values to write
* @param[in] n size of txbuf less one (not considering the first
* element)
* @return the operation status.
*
* @notapi
*/
static msg_t hts221I2CWriteRegister(I2CDriver *i2cp, uint8_t* txbuf, size_t n) {
if (n > 1)
(*txbuf) |= HTS221_SUB_MS;
return i2cMasterTransmitTimeout(i2cp, HTS221_SAD, txbuf, n + 1, NULL, 0,
TIME_INFINITE);
}
#endif /* HTS221_USE_I2C */
/**
* @brief Computes biases and sensitivities starting from data stored in
* calibration registers.
* @note Factory bias and sensitivity values are stored into the driver
* structure.
*
* @param[in] devp pointer to the HTS221 interface
* @return the operation status.
*
* @notapi
*/
static msg_t hts221Calibrate(HTS221Driver *devp) {
msg_t msg;
uint8_t calib[16], H0_rH_x2, H1_rH_x2, msb;
int16_t H0_T0_OUT, H1_T0_OUT, T0_degC_x8, T1_degC_x8, T0_OUT, T1_OUT;
/* Retrieving rH values from Calibration registers */
msg = hts221I2CReadRegister(devp->config->i2cp,
HTS221_AD_CALIB_0, calib, 16);
H0_rH_x2 = calib[0];
H1_rH_x2 = calib[1];
H0_T0_OUT = calib[6];
H0_T0_OUT += calib[7] << 8;
H1_T0_OUT = calib[10];
H1_T0_OUT += calib[11] << 8;
T0_degC_x8 = calib[2];
/* Completing T0_degC_x8 value */
msb = (calib[5] & HTS221_SEL(0x03, 0));
if (msb & HTS221_SEL(0x01, 1)) {
msb |= HTS221_SEL(0x3F, 2);
}
T0_degC_x8 += msb << 8;
T1_degC_x8 = calib[3];
/* Completing T1_degC_x8 value */
msb = ((calib[5] & HTS221_SEL(0x03, 2)) >> 2);
if (msb & HTS221_SEL(0x01, 1)) {
msb |= HTS221_SEL(0x3F, 2);
}
T1_degC_x8 += msb << 8;
T0_OUT = calib[12];
T0_OUT += calib[13] << 8;
T1_OUT = calib[14];
T1_OUT += calib[15] << 8;
devp->hygrofactorysensitivity = ((float)H1_rH_x2 - (float)H0_rH_x2) /
(((float)H1_T0_OUT - (float)H0_T0_OUT) * 2.0f);
devp->hygrofactorybias = (devp->hygrofactorysensitivity * (float)H0_T0_OUT) -
((float)H0_rH_x2 / 2.0f);
devp->thermofactorysensitivity = ((float)T1_degC_x8 - (float)T0_degC_x8) /
(((float)T1_OUT - (float)T0_OUT) * 8.0f);
devp->thermofactorybias = (devp->thermofactorysensitivity * (float)T0_OUT) -
((float)T0_degC_x8 / 8.0f);
return msg;
}
/**
* @brief Return the number of axes of the BaseHygrometer.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
*
* @return the number of axes.
*/
static size_t hygro_get_axes_number(void *ip) {
(void)ip;
return HTS221_HYGRO_NUMBER_OF_AXES;
}
/**
* @brief Retrieves raw data from the BaseHygrometer.
* @note This data is retrieved from MEMS register without any algebraical
* manipulation.
* @note The axes array must be at least the same size of the
* BaseHygrometer axes number.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
* @param[out] axes a buffer which would be filled with raw data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*/
static msg_t hygro_read_raw(void *ip, int32_t axes[]) {
HTS221Driver* devp;
uint8_t buff[2];
int16_t tmp;
msg_t msg;
osalDbgCheck((ip != NULL) && (axes != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseHygrometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"hygro_read_raw(), invalid state");
osalDbgAssert((devp->config->i2cp->state == I2C_READY),
"hygro_read_raw(), channel not ready");
#if HTS221_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
i2cStart(devp->config->i2cp,
devp->config->i2ccfg);
#endif /* HTS221_SHARED_I2C */
msg = hts221I2CReadRegister(devp->config->i2cp, HTS221_AD_HUMIDITY_OUT_L,
buff, 2);
#if HTS221_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
if (msg == MSG_OK) {
tmp = buff[0] + (buff[1] << 8);
*axes = (int32_t)tmp;
}
return msg;
}
/**
* @brief Retrieves cooked data from the BaseHygrometer.
* @note This data is manipulated according to the formula
* cooked = (raw * sensitivity) - bias.
* @note Final data is expressed as %rH.
* @note The axes array must be at least the same size of the
* BaseHygrometer axes number.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
* @param[out] axes a buffer which would be filled with cooked data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*/
static msg_t hygro_read_cooked(void *ip, float axes[]) {
HTS221Driver* devp;
int32_t raw;
msg_t msg;
osalDbgCheck((ip != NULL) && (axes != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseHygrometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"hygro_read_cooked(), invalid state");
msg = hygro_read_raw(ip, &raw);
*axes = (raw * devp->hygrosensitivity) - devp->hygrobias;
return msg;
}
/**
* @brief Set bias values for the BaseHygrometer.
* @note Bias must be expressed as %rH.
* @note The bias buffer must be at least the same size of the
* BaseHygrometer axes number.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
* @param[in] bp a buffer which contains biases.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*/
static msg_t hygro_set_bias(void *ip, float *bp) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck((ip != NULL) && (bp != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseHygrometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"hygro_set_bias(), invalid state");
devp->hygrobias = *bp;
return msg;
}
/**
* @brief Reset bias values for the BaseHygrometer.
* @note Default biases value are obtained from device datasheet when
* available otherwise they are considered zero.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t hygro_reset_bias(void *ip) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck(ip != NULL);
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseHygrometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"hygro_reset_bias(), invalid state");
devp->hygrobias = devp->hygrofactorybias;
return msg;
}
/**
* @brief Set sensitivity values for the BaseHygrometer.
* @note Sensitivity must be expressed as %rH/LSB.
* @note The sensitivity buffer must be at least the same size of the
* BaseHygrometer axes number.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
* @param[in] sp a buffer which contains sensitivities.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t hygro_set_sensitivity(void *ip, float *sp) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck((ip != NULL) && (sp != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseHygrometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"hygro_set_sensitivity(), invalid state");
devp->hygrosensitivity = *sp;
return msg;
}
/**
* @brief Reset sensitivity values for the BaseHygrometer.
* @note Default sensitivities value are obtained from device datasheet.
*
* @param[in] ip pointer to @p BaseHygrometer interface.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t hygro_reset_sensitivity(void *ip) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck(ip != NULL);
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseHygrometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"hygro_reset_sensitivity(), invalid state");
devp->hygrosensitivity = devp->hygrofactorysensitivity;
return msg;
}
/**
* @brief Return the number of axes of the BaseThermometer.
*
* @param[in] ip pointer to @p BaseThermometer interface.
*
* @return the number of axes.
*/
static size_t thermo_get_axes_number(void *ip) {
(void)ip;
return HTS221_THERMO_NUMBER_OF_AXES;
}
/**
* @brief Retrieves raw data from the BaseThermometer.
* @note This data is retrieved from MEMS register without any algebraical
* manipulation.
* @note The axes array must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] ip pointer to @p BaseThermometer interface.
* @param[out] axes a buffer which would be filled with raw data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*/
static msg_t thermo_read_raw(void *ip, int32_t axes[]) {
HTS221Driver* devp;
int16_t tmp;
uint8_t buff[2];
msg_t msg;
osalDbgCheck((ip != NULL) && (axes != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseThermometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"thermo_read_raw(), invalid state");
osalDbgAssert((devp->config->i2cp->state == I2C_READY),
"thermo_read_raw(), channel not ready");
#if HTS221_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
i2cStart(devp->config->i2cp,
devp->config->i2ccfg);
#endif /* HTS221_SHARED_I2C */
msg = hts221I2CReadRegister(devp->config->i2cp, HTS221_AD_TEMP_OUT_L,
buff, 2);
#if HTS221_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
if (msg == MSG_OK) {
tmp = buff[0] + (buff[1] << 8);
*axes = (int32_t)tmp;
}
return msg;
}
/**
* @brief Retrieves cooked data from the BaseThermometer.
* @note This data is manipulated according to the formula
* cooked = (raw * sensitivity) - bias.
* @note Final data is expressed as °C.
* @note The axes array must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] ip pointer to @p BaseThermometer interface.
* @param[out] axis a buffer which would be filled with cooked data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*/
static msg_t thermo_read_cooked(void *ip, float* axis) {
HTS221Driver* devp;
int32_t raw;
msg_t msg;
osalDbgCheck((ip != NULL) && (axis != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseThermometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"thermo_read_cooked(), invalid state");
msg = thermo_read_raw(devp, &raw);
*axis = (raw * devp->thermosensitivity) - devp->thermobias;
return msg;
}
/**
* @brief Set bias values for the BaseThermometer.
* @note Bias must be expressed as °C.
* @note The bias buffer must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] ip pointer to @p BaseThermometer interface.
* @param[in] bp a buffer which contains biases.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t thermo_set_bias(void *ip, float *bp) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck((ip != NULL) && (bp != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseThermometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"thermo_set_bias(), invalid state");
devp->thermobias = *bp;
return msg;
}
/**
* @brief Reset bias values for the BaseThermometer.
* @note Default biases value are obtained from device datasheet when
* available otherwise they are considered zero.
*
* @param[in] ip pointer to @p BaseThermometer interface.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t thermo_reset_bias(void *ip) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck(ip != NULL);
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseThermometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"thermo_reset_bias(), invalid state");
devp->thermobias = devp->thermofactorybias;
return msg;
}
/**
* @brief Set sensitivity values for the BaseThermometer.
* @note Sensitivity must be expressed as °C/LSB.
* @note The sensitivity buffer must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] ip pointer to @p BaseThermometer interface.
* @param[in] sp a buffer which contains sensitivities.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t thermo_set_sensitivity(void *ip, float *sp) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck((ip != NULL) && (sp != NULL));
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseThermometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"thermo_set_sensitivity(), invalid state");
devp->thermosensitivity = *sp;
return msg;
}
/**
* @brief Reset sensitivity values for the BaseThermometer.
* @note Default sensitivities value are obtained from device datasheet.
*
* @param[in] ip pointer to @p BaseThermometer interface.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*/
static msg_t thermo_reset_sensitivity(void *ip) {
HTS221Driver* devp;
msg_t msg = MSG_OK;
osalDbgCheck(ip != NULL);
/* Getting parent instance pointer.*/
devp = objGetInstance(HTS221Driver*, (BaseThermometer*)ip);
osalDbgAssert((devp->state == HTS221_READY),
"thermo_reset_sensitivity(), invalid state");
devp->thermosensitivity = devp->thermofactorysensitivity;
return msg;
}
static const struct HTS221VMT vmt_device = {
(size_t)0
};
static const struct BaseHygrometerVMT vmt_hygrometer = {
sizeof(struct HTS221VMT*),
hygro_get_axes_number, hygro_read_raw, hygro_read_cooked,
hygro_set_bias, hygro_reset_bias, hygro_set_sensitivity,
hygro_reset_sensitivity
};
static const struct BaseThermometerVMT vmt_thermometer = {
sizeof(struct HTS221VMT*) + sizeof(BaseHygrometer),
thermo_get_axes_number, thermo_read_raw, thermo_read_cooked,
thermo_set_bias, thermo_reset_bias, thermo_set_sensitivity,
thermo_reset_sensitivity
};
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Initializes an instance.
*
* @param[out] devp pointer to the @p HTS221Driver object
*
* @init
*/
void hts221ObjectInit(HTS221Driver *devp) {
devp->vmt = &vmt_device;
devp->hygro_if.vmt = &vmt_hygrometer;
devp->thermo_if.vmt = &vmt_thermometer;
devp->config = NULL;
devp->hygroaxes = HTS221_HYGRO_NUMBER_OF_AXES;
devp->thermoaxes = HTS221_THERMO_NUMBER_OF_AXES;
devp->hygrobias = 0.0f;
devp->thermobias = 0.0f;
devp->state = HTS221_STOP;
}
/**
* @brief Configures and activates HTS221 Complex Driver peripheral.
*
* @param[in] devp pointer to the @p HTS221Driver object
* @param[in] config pointer to the @p HTS221Config object
*
* @api
*/
void hts221Start(HTS221Driver *devp, const HTS221Config *config) {
uint8_t cr[2];
osalDbgCheck((devp != NULL) && (config != NULL));
osalDbgAssert((devp->state == HTS221_STOP) || (devp->state == HTS221_READY),
"hts221Start(), invalid state");
devp->config = config;
#if HTS221_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
/* Intializing the I2C. */
i2cStart(devp->config->i2cp, devp->config->i2ccfg);
hts221Calibrate(devp);
#if HTS221_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
if(devp->config->hygrosensitivity == NULL) {
devp->hygrosensitivity = devp->hygrofactorysensitivity;
}
else{
/* Taking hygrometer sensitivity from user configurations */
devp->hygrosensitivity = *(devp->config->hygrosensitivity);
}
if(devp->config->hygrobias == NULL) {
devp->hygrobias = devp->hygrofactorybias;
}
else{
/* Taking hygrometer bias from user configurations */
devp->hygrobias = *(devp->config->hygrobias);
}
if(devp->config->thermosensitivity == NULL) {
devp->thermosensitivity = devp->thermofactorysensitivity;
}
else{
/* Taking thermometer sensitivity from user configurations */
devp->thermosensitivity = *(devp->config->thermosensitivity);
}
if(devp->config->thermobias == NULL) {
devp->thermobias = devp->thermofactorybias;
}
else{
/* Taking thermometer bias from user configurations */
devp->thermobias = *(devp->config->thermobias);
}
/* Control register 1 configuration block.*/
{
cr[0] = HTS221_AD_CTRL_REG1;
cr[1] = devp->config->outputdatarate | HTS221_CTRL_REG1_PD;
#if HTS221_USE_ADVANCED || defined(__DOXYGEN__)
cr[1] |= devp->config->blockdataupdate;
#endif
#if HTS221_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
i2cStart(devp->config->i2cp, devp->config->i2ccfg);
#endif /* HTS221_SHARED_I2C */
hts221I2CWriteRegister(devp->config->i2cp, cr, 1);
#if HTS221_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
}
/* Average register configuration block.*/
{
cr[0] = HTS221_AD_AV_CONF;
cr[1] = 0x05;
#if HTS221_USE_ADVANCED || defined(__DOXYGEN__)
cr[1] = devp->config->hygroresolution | devp->config->thermoresolution;
#endif
#if HTS221_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
i2cStart(devp->config->i2cp, devp->config->i2ccfg);
#endif /* HTS221_SHARED_I2C */
hts221I2CWriteRegister(devp->config->i2cp, cr, 1);
#if HTS221_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
}
/* This is the MEMS transient recovery time */
osalThreadSleepMilliseconds(5);
devp->state = HTS221_READY;
}
/**
* @brief Deactivates the HTS221 Complex Driver peripheral.
*
* @param[in] devp pointer to the @p HTS221Driver object
*
* @api
*/
void hts221Stop(HTS221Driver *devp) {
uint8_t cr[2];
osalDbgCheck(devp != NULL);
osalDbgAssert((devp->state == HTS221_STOP) || (devp->state == HTS221_READY),
"hts221Stop(), invalid state");
if (devp->state == HTS221_READY) {
#if HTS221_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
i2cStart(devp->config->i2cp, devp->config->i2ccfg);
#endif /* HTS221_SHARED_I2C */
cr[0] = HTS221_AD_CTRL_REG1;
cr[1] = 0;
hts221I2CWriteRegister(devp->config->i2cp, cr, 1);
i2cStop(devp->config->i2cp);
#if HTS221_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* HTS221_SHARED_I2C */
}
devp->state = HTS221_STOP;
}
/** @} */