You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

639 lines
25 KiB
C

/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file hal_usb.h
* @brief USB Driver macros and structures.
*
* @addtogroup USB
* @{
*/
#ifndef HAL_USB_H
#define HAL_USB_H
#if (HAL_USE_USB == TRUE) || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
#define USB_ENDPOINT_OUT(ep) (ep)
#define USB_ENDPOINT_IN(ep) ((ep) | 0x80U)
#define USB_RTYPE_DIR_MASK 0x80U
#define USB_RTYPE_DIR_HOST2DEV 0x00U
#define USB_RTYPE_DIR_DEV2HOST 0x80U
#define USB_RTYPE_TYPE_MASK 0x60U
#define USB_RTYPE_TYPE_STD 0x00U
#define USB_RTYPE_TYPE_CLASS 0x20U
#define USB_RTYPE_TYPE_VENDOR 0x40U
#define USB_RTYPE_TYPE_RESERVED 0x60U
#define USB_RTYPE_RECIPIENT_MASK 0x1FU
#define USB_RTYPE_RECIPIENT_DEVICE 0x00U
#define USB_RTYPE_RECIPIENT_INTERFACE 0x01U
#define USB_RTYPE_RECIPIENT_ENDPOINT 0x02U
#define USB_RTYPE_RECIPIENT_OTHER 0x03U
#define USB_REQ_GET_STATUS 0U
#define USB_REQ_CLEAR_FEATURE 1U
#define USB_REQ_SET_FEATURE 3U
#define USB_REQ_SET_ADDRESS 5U
#define USB_REQ_GET_DESCRIPTOR 6U
#define USB_REQ_SET_DESCRIPTOR 7U
#define USB_REQ_GET_CONFIGURATION 8U
#define USB_REQ_SET_CONFIGURATION 9U
#define USB_REQ_GET_INTERFACE 10U
#define USB_REQ_SET_INTERFACE 11U
#define USB_REQ_SYNCH_FRAME 12U
#define USB_DESCRIPTOR_DEVICE 1U
#define USB_DESCRIPTOR_CONFIGURATION 2U
#define USB_DESCRIPTOR_STRING 3U
#define USB_DESCRIPTOR_INTERFACE 4U
#define USB_DESCRIPTOR_ENDPOINT 5U
#define USB_DESCRIPTOR_DEVICE_QUALIFIER 6U
#define USB_DESCRIPTOR_OTHER_SPEED_CFG 7U
#define USB_DESCRIPTOR_INTERFACE_POWER 8U
#define USB_DESCRIPTOR_INTERFACE_ASSOCIATION 11U
#define USB_FEATURE_ENDPOINT_HALT 0U
#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1U
#define USB_FEATURE_TEST_MODE 2U
#define USB_EARLY_SET_ADDRESS 0
#define USB_LATE_SET_ADDRESS 1
#define USB_EP0_STATUS_STAGE_SW 0
#define USB_EP0_STATUS_STAGE_HW 1
#define USB_SET_ADDRESS_ACK_SW 0
#define USB_SET_ADDRESS_ACK_HW 1
/**
* @name Helper macros for USB descriptors
* @{
*/
/**
* @brief Helper macro for index values into descriptor strings.
*/
#define USB_DESC_INDEX(i) ((uint8_t)(i))
/**
* @brief Helper macro for byte values into descriptor strings.
*/
#define USB_DESC_BYTE(b) ((uint8_t)(b))
/**
* @brief Helper macro for word values into descriptor strings.
*/
#define USB_DESC_WORD(w) \
(uint8_t)((w) & 255U), \
(uint8_t)(((w) >> 8) & 255U)
/**
* @brief Helper macro for BCD values into descriptor strings.
*/
#define USB_DESC_BCD(bcd) \
(uint8_t)((bcd) & 255U), \
(uint8_t)(((bcd) >> 8) & 255)
/*
* @define Device Descriptor size.
*/
#define USB_DESC_DEVICE_SIZE 18U
/**
* @brief Device Descriptor helper macro.
*/
#define USB_DESC_DEVICE(bcdUSB, bDeviceClass, bDeviceSubClass, \
bDeviceProtocol, bMaxPacketSize, idVendor, \
idProduct, bcdDevice, iManufacturer, \
iProduct, iSerialNumber, bNumConfigurations) \
USB_DESC_BYTE(USB_DESC_DEVICE_SIZE), \
USB_DESC_BYTE(USB_DESCRIPTOR_DEVICE), \
USB_DESC_BCD(bcdUSB), \
USB_DESC_BYTE(bDeviceClass), \
USB_DESC_BYTE(bDeviceSubClass), \
USB_DESC_BYTE(bDeviceProtocol), \
USB_DESC_BYTE(bMaxPacketSize), \
USB_DESC_WORD(idVendor), \
USB_DESC_WORD(idProduct), \
USB_DESC_BCD(bcdDevice), \
USB_DESC_INDEX(iManufacturer), \
USB_DESC_INDEX(iProduct), \
USB_DESC_INDEX(iSerialNumber), \
USB_DESC_BYTE(bNumConfigurations)
/**
* @brief Configuration Descriptor size.
*/
#define USB_DESC_CONFIGURATION_SIZE 9U
/**
* @brief Configuration Descriptor helper macro.
*/
#define USB_DESC_CONFIGURATION(wTotalLength, bNumInterfaces, \
bConfigurationValue, iConfiguration, \
bmAttributes, bMaxPower) \
USB_DESC_BYTE(USB_DESC_CONFIGURATION_SIZE), \
USB_DESC_BYTE(USB_DESCRIPTOR_CONFIGURATION), \
USB_DESC_WORD(wTotalLength), \
USB_DESC_BYTE(bNumInterfaces), \
USB_DESC_BYTE(bConfigurationValue), \
USB_DESC_INDEX(iConfiguration), \
USB_DESC_BYTE(bmAttributes), \
USB_DESC_BYTE(bMaxPower)
/**
* @brief Interface Descriptor size.
*/
#define USB_DESC_INTERFACE_SIZE 9U
/**
* @brief Interface Descriptor helper macro.
*/
#define USB_DESC_INTERFACE(bInterfaceNumber, bAlternateSetting, \
bNumEndpoints, bInterfaceClass, \
bInterfaceSubClass, bInterfaceProtocol, \
iInterface) \
USB_DESC_BYTE(USB_DESC_INTERFACE_SIZE), \
USB_DESC_BYTE(USB_DESCRIPTOR_INTERFACE), \
USB_DESC_BYTE(bInterfaceNumber), \
USB_DESC_BYTE(bAlternateSetting), \
USB_DESC_BYTE(bNumEndpoints), \
USB_DESC_BYTE(bInterfaceClass), \
USB_DESC_BYTE(bInterfaceSubClass), \
USB_DESC_BYTE(bInterfaceProtocol), \
USB_DESC_INDEX(iInterface)
/**
* @brief Interface Association Descriptor size.
*/
#define USB_DESC_INTERFACE_ASSOCIATION_SIZE 8U
/**
* @brief Interface Association Descriptor helper macro.
*/
#define USB_DESC_INTERFACE_ASSOCIATION(bFirstInterface, \
bInterfaceCount, bFunctionClass, \
bFunctionSubClass, bFunctionProcotol, \
iInterface) \
USB_DESC_BYTE(USB_DESC_INTERFACE_ASSOCIATION_SIZE), \
USB_DESC_BYTE(USB_DESCRIPTOR_INTERFACE_ASSOCIATION), \
USB_DESC_BYTE(bFirstInterface), \
USB_DESC_BYTE(bInterfaceCount), \
USB_DESC_BYTE(bFunctionClass), \
USB_DESC_BYTE(bFunctionSubClass), \
USB_DESC_BYTE(bFunctionProcotol), \
USB_DESC_INDEX(iInterface)
/**
* @brief Endpoint Descriptor size.
*/
#define USB_DESC_ENDPOINT_SIZE 7U
/**
* @brief Endpoint Descriptor helper macro.
*/
#define USB_DESC_ENDPOINT(bEndpointAddress, bmAttributes, wMaxPacketSize, \
bInterval) \
USB_DESC_BYTE(USB_DESC_ENDPOINT_SIZE), \
USB_DESC_BYTE(USB_DESCRIPTOR_ENDPOINT), \
USB_DESC_BYTE(bEndpointAddress), \
USB_DESC_BYTE(bmAttributes), \
USB_DESC_WORD(wMaxPacketSize), \
USB_DESC_BYTE(bInterval)
/** @} */
/**
* @name Endpoint types and settings
* @{
*/
#define USB_EP_MODE_TYPE 0x0003U /**< Endpoint type mask. */
#define USB_EP_MODE_TYPE_CTRL 0x0000U /**< Control endpoint. */
#define USB_EP_MODE_TYPE_ISOC 0x0001U /**< Isochronous endpoint. */
#define USB_EP_MODE_TYPE_BULK 0x0002U /**< Bulk endpoint. */
#define USB_EP_MODE_TYPE_INTR 0x0003U /**< Interrupt endpoint. */
/** @} */
#define USB_IN_STATE 0x08U
#define USB_OUT_STATE 0x10U
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT FALSE
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of a structure representing an USB driver.
*/
typedef struct USBDriver USBDriver;
/**
* @brief Type of an endpoint identifier.
*/
typedef uint8_t usbep_t;
/**
* @brief Type of a driver state machine possible states.
*/
typedef enum {
USB_UNINIT = 0, /**< Not initialized. */
USB_STOP = 1, /**< Stopped. */
USB_READY = 2, /**< Ready, after bus reset. */
USB_SELECTED = 3, /**< Address assigned. */
USB_ACTIVE = 4, /**< Active, configuration selected.*/
USB_SUSPENDED = 5 /**< Suspended, low power mode. */
} usbstate_t;
/**
* @brief Type of an endpoint status.
*/
typedef enum {
EP_STATUS_DISABLED = 0, /**< Endpoint not active. */
EP_STATUS_STALLED = 1, /**< Endpoint opened but stalled. */
EP_STATUS_ACTIVE = 2 /**< Active endpoint. */
} usbepstatus_t;
/**
* @brief Type of an endpoint zero state machine states.
*/
typedef enum {
USB_EP0_STP_WAITING = 0U, /**< Waiting for SETUP data.*/
USB_EP0_IN_TX = USB_IN_STATE | 1U, /**< Transmitting. */
USB_EP0_IN_WAITING_TX0 = USB_IN_STATE | 2U, /**< Waiting transmit 0. */
USB_EP0_IN_SENDING_STS = USB_IN_STATE | 3U, /**< Sending status. */
USB_EP0_OUT_WAITING_STS = USB_OUT_STATE | 4U, /**< Waiting status. */
USB_EP0_OUT_RX = USB_OUT_STATE | 5U, /**< Receiving. */
USB_EP0_ERROR = 6U /**< Error, EP0 stalled. */
} usbep0state_t;
/**
* @brief Type of an enumeration of the possible USB events.
*/
typedef enum {
USB_EVENT_RESET = 0, /**< Driver has been reset by host. */
USB_EVENT_ADDRESS = 1, /**< Address assigned. */
USB_EVENT_CONFIGURED = 2, /**< Configuration selected. */
USB_EVENT_UNCONFIGURED = 3, /**< Configuration removed. */
USB_EVENT_SUSPEND = 4, /**< Entering suspend mode. */
USB_EVENT_WAKEUP = 5, /**< Leaving suspend mode. */
USB_EVENT_STALLED = 6 /**< Endpoint 0 error, stalled. */
} usbevent_t;
/**
* @brief Type of an USB descriptor.
*/
typedef struct {
/**
* @brief Descriptor size in unicode characters.
*/
size_t ud_size;
/**
* @brief Pointer to the descriptor.
*/
const uint8_t *ud_string;
} USBDescriptor;
/**
* @brief Type of an USB generic notification callback.
*
* @param[in] usbp pointer to the @p USBDriver object triggering the
* callback
*/
typedef void (*usbcallback_t)(USBDriver *usbp);
/**
* @brief Type of an USB endpoint callback.
*
* @param[in] usbp pointer to the @p USBDriver object triggering the
* callback
* @param[in] ep endpoint number
*/
typedef void (*usbepcallback_t)(USBDriver *usbp, usbep_t ep);
/**
* @brief Type of an USB event notification callback.
*
* @param[in] usbp pointer to the @p USBDriver object triggering the
* callback
* @param[in] event event type
*/
typedef void (*usbeventcb_t)(USBDriver *usbp, usbevent_t event);
/**
* @brief Type of a requests handler callback.
* @details The request is encoded in the @p usb_setup buffer.
*
* @param[in] usbp pointer to the @p USBDriver object triggering the
* callback
* @return The request handling exit code.
* @retval false Request not recognized by the handler.
* @retval true Request handled.
*/
typedef bool (*usbreqhandler_t)(USBDriver *usbp);
/**
* @brief Type of an USB descriptor-retrieving callback.
*/
typedef const USBDescriptor * (*usbgetdescriptor_t)(USBDriver *usbp,
uint8_t dtype,
uint8_t dindex,
uint16_t lang);
#include "hal_usb_lld.h"
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @name Macro Functions
* @{
*/
/**
* @brief Returns the driver state.
*
* @param[in] usbp pointer to the @p USBDriver object
* @return The driver state.
*
* @iclass
*/
#define usbGetDriverStateI(usbp) ((usbp)->state)
/**
* @brief Connects the USB device.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @api
*/
#define usbConnectBus(usbp) usb_lld_connect_bus(usbp)
/**
* @brief Disconnect the USB device.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @api
*/
#define usbDisconnectBus(usbp) usb_lld_disconnect_bus(usbp)
/**
* @brief Returns the current frame number.
*
* @param[in] usbp pointer to the @p USBDriver object
* @return The current frame number.
*
* @xclass
*/
#define usbGetFrameNumberX(usbp) usb_lld_get_frame_number(usbp)
/**
* @brief Returns the status of an IN endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return The operation status.
* @retval false Endpoint ready.
* @retval true Endpoint transmitting.
*
* @iclass
*/
#define usbGetTransmitStatusI(usbp, ep) \
(((usbp)->transmitting & (uint16_t)((unsigned)1U << (unsigned)(ep))) != 0U)
/**
* @brief Returns the status of an OUT endpoint.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return The operation status.
* @retval false Endpoint ready.
* @retval true Endpoint receiving.
*
* @iclass
*/
#define usbGetReceiveStatusI(usbp, ep) \
(((usbp)->receiving & (uint16_t)((unsigned)1U << (unsigned)(ep))) != 0U)
/**
* @brief Returns the exact size of a receive transaction.
* @details The received size can be different from the size specified in
* @p usbStartReceiveI() because the last packet could have a size
* different from the expected one.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return Received data size.
*
* @xclass
*/
#define usbGetReceiveTransactionSizeX(usbp, ep) \
usb_lld_get_transaction_size(usbp, ep)
/**
* @brief Request transfer setup.
* @details This macro is used by the request handling callbacks in order to
* prepare a transaction over the endpoint zero.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] buf pointer to a buffer for the transaction data
* @param[in] n number of bytes to be transferred
* @param[in] endcb callback to be invoked after the transfer or @p NULL
*
* @special
*/
#define usbSetupTransfer(usbp, buf, n, endcb) { \
(usbp)->ep0next = (buf); \
(usbp)->ep0n = (n); \
(usbp)->ep0endcb = (endcb); \
}
/**
* @brief Reads a setup packet from the dedicated packet buffer.
* @details This function must be invoked in the context of the @p setup_cb
* callback in order to read the received setup packet.
* @pre In order to use this function the endpoint must have been
* initialized as a control endpoint.
* @note This function can be invoked both in thread and IRQ context.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @param[out] buf buffer where to copy the packet data
*
* @special
*/
#define usbReadSetup(usbp, ep, buf) usb_lld_read_setup(usbp, ep, buf)
/** @} */
/**
* @name Low level driver helper macros
* @{
*/
/**
* @brief Common ISR code, usb event callback.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] evt USB event code
*
* @notapi
*/
#define _usb_isr_invoke_event_cb(usbp, evt) { \
if (((usbp)->config->event_cb) != NULL) { \
(usbp)->config->event_cb(usbp, evt); \
} \
}
/**
* @brief Common ISR code, SOF callback.
*
* @param[in] usbp pointer to the @p USBDriver object
*
* @notapi
*/
#define _usb_isr_invoke_sof_cb(usbp) { \
if (((usbp)->config->sof_cb) != NULL) { \
(usbp)->config->sof_cb(usbp); \
} \
}
/**
* @brief Common ISR code, setup packet callback.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
#define _usb_isr_invoke_setup_cb(usbp, ep) { \
(usbp)->epc[ep]->setup_cb(usbp, ep); \
}
/**
* @brief Common ISR code, IN endpoint callback.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
#define _usb_isr_invoke_in_cb(usbp, ep) { \
(usbp)->transmitting &= ~(1 << (ep)); \
if ((usbp)->epc[ep]->in_cb != NULL) { \
(usbp)->epc[ep]->in_cb(usbp, ep); \
} \
osalSysLockFromISR(); \
osalThreadResumeI(&(usbp)->epc[ep]->in_state->thread, MSG_OK); \
osalSysUnlockFromISR(); \
}
#else
#define _usb_isr_invoke_in_cb(usbp, ep) { \
(usbp)->transmitting &= ~(1 << (ep)); \
if ((usbp)->epc[ep]->in_cb != NULL) { \
(usbp)->epc[ep]->in_cb(usbp, ep); \
} \
}
#endif
/**
* @brief Common ISR code, OUT endpoint event.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
*
* @notapi
*/
#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
#define _usb_isr_invoke_out_cb(usbp, ep) { \
(usbp)->receiving &= ~(1 << (ep)); \
if ((usbp)->epc[ep]->out_cb != NULL) { \
(usbp)->epc[ep]->out_cb(usbp, ep); \
} \
osalSysLockFromISR(); \
osalThreadResumeI(&(usbp)->epc[ep]->out_state->thread, \
usbGetReceiveTransactionSizeX(usbp, ep)); \
osalSysUnlockFromISR(); \
}
#else
#define _usb_isr_invoke_out_cb(usbp, ep) { \
(usbp)->receiving &= ~(1 << (ep)); \
if ((usbp)->epc[ep]->out_cb != NULL) { \
(usbp)->epc[ep]->out_cb(usbp, ep); \
} \
}
#endif
/** @} */
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#ifdef __cplusplus
extern "C" {
#endif
void usbInit(void);
void usbObjectInit(USBDriver *usbp);
void usbStart(USBDriver *usbp, const USBConfig *config);
void usbStop(USBDriver *usbp);
void usbInitEndpointI(USBDriver *usbp, usbep_t ep,
const USBEndpointConfig *epcp);
void usbDisableEndpointsI(USBDriver *usbp);
void usbReadSetupI(USBDriver *usbp, usbep_t ep, uint8_t *buf);
void usbStartReceiveI(USBDriver *usbp, usbep_t ep,
uint8_t *buf, size_t n);
void usbStartTransmitI(USBDriver *usbp, usbep_t ep,
const uint8_t *buf, size_t n);
#if USB_USE_WAIT == TRUE
msg_t usbReceive(USBDriver *usbp, usbep_t ep, uint8_t *buf, size_t n);
msg_t usbTransmit(USBDriver *usbp, usbep_t ep, const uint8_t *buf, size_t n);
#endif
bool usbStallReceiveI(USBDriver *usbp, usbep_t ep);
bool usbStallTransmitI(USBDriver *usbp, usbep_t ep);
void usbWakeupHost(USBDriver *usbp);
void _usb_reset(USBDriver *usbp);
void _usb_suspend(USBDriver *usbp);
void _usb_wakeup(USBDriver *usbp);
void _usb_ep0setup(USBDriver *usbp, usbep_t ep);
void _usb_ep0in(USBDriver *usbp, usbep_t ep);
void _usb_ep0out(USBDriver *usbp, usbep_t ep);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_USB == TRUE */
#endif /* HAL_USB_H */
/** @} */