add l476 implementationl476

1 files changed, 0 insertions, 338 deletions

diff --git a/Core/Inc/stm32u0xx_hal_conf.h b/Core/Inc/stm32u0xx_hal_conf.h
deleted file mode 100644
index 66cfc34..0000000
--- a/Core/Inc/stm32u0xx_hal_conf.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/* USER CODE BEGIN Header */

-/**

-  ******************************************************************************

-  * @file    stm32u0xx_hal_conf.h

-  * @author  MCD Application Team

-  * @brief   HAL configuration file.

-  ******************************************************************************

-  * @attention

-  *

-  * Copyright (c) 2023 STMicroelectronics.

-  * All rights reserved.

-  *

-  * This software is licensed under terms that can be found in the LICENSE file

-  * in the root directory of this software component.

-  * If no LICENSE file comes with this software, it is provided AS-IS.

-  *

-  ******************************************************************************

-  */

-/* USER CODE END Header */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32U0xx_HAL_CONF_H

-#define __STM32U0xx_HAL_CONF_H

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/* Exported types ------------------------------------------------------------*/

-/* Exported constants --------------------------------------------------------*/

-

-/* ########################## Module Selection ############################## */

-/**

-  * @brief This is the list of modules to be used in the HAL driver

-  */

-

-#define HAL_MODULE_ENABLED

-/* #define HAL_ADC_MODULE_ENABLED   */

-/* #define HAL_COMP_MODULE_ENABLED   */

-/* #define HAL_CRC_MODULE_ENABLED   */

-/* #define HAL_CRS_MODULE_ENABLED   */

-/* #define HAL_CRYP_MODULE_ENABLED   */

-/* #define HAL_DAC_MODULE_ENABLED   */

-/* #define HAL_I2C_MODULE_ENABLED   */

-/* #define HAL_IRDA_MODULE_ENABLED   */

-/* #define HAL_IWDG_MODULE_ENABLED   */

-/* #define HAL_LCD_MODULE_ENABLED   */

-/* #define HAL_LPTIM_MODULE_ENABLED   */

-/* #define HAL_OPAMP_MODULE_ENABLED   */

-/* #define HAL_PCD_MODULE_ENABLED   */

-/* #define HAL_RNG_MODULE_ENABLED   */

-/* #define HAL_RTC_MODULE_ENABLED   */

-#define HAL_SPI_MODULE_ENABLED

-/* #define HAL_SMARTCARD_MODULE_ENABLED   */

-/* #define HAL_TIM_MODULE_ENABLED   */

-/* #define HAL_TSC_MODULE_ENABLED   */

-#define HAL_UART_MODULE_ENABLED

-/* #define HAL_USART_MODULE_ENABLED   */

-/* #define HAL_WWDG_MODULE_ENABLED   */

-#define HAL_GPIO_MODULE_ENABLED

-#define HAL_EXTI_MODULE_ENABLED

-#define HAL_DMA_MODULE_ENABLED

-#define HAL_RCC_MODULE_ENABLED

-#define HAL_FLASH_MODULE_ENABLED

-#define HAL_PWR_MODULE_ENABLED

-#define HAL_CORTEX_MODULE_ENABLED

-

-/* ########################## Oscillator Values adaptation ####################*/

-/**

-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

-  *        This value is used by the RCC HAL module to compute the system frequency

-  *        (when HSE is used as system clock source, directly or through the PLL).

-  */

-#if !defined  (HSE_VALUE)

-  #define HSE_VALUE              4000000U /*!< Value of the External oscillator in Hz */

-#endif /* HSE_VALUE */

-

-#if !defined  (HSE_STARTUP_TIMEOUT)

-  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */

-#endif /* HSE_STARTUP_TIMEOUT */

-

-/**

-  * @brief Internal Multiple Speed oscillator (MSI) default value.

-  *        This value is the default MSI range value after Reset.

-  */

-#if !defined  (MSI_VALUE)

-  #define MSI_VALUE              4000000U /*!< Value of the Internal oscillator in Hz*/

-#endif /* MSI_VALUE */

-

-/**

- * @brief Internal Multiple Speed oscillator (MSI) default value.

- *        This value is the default MSI range value after Reset.

- */

-#if !defined  (MSI32_VALUE)

-#define MSI32_VALUE            32000000U /*!< Value of the Internal oscillator in Hz*/

-#endif /* MSI32_VALUE */

-

-/**

-  * @brief Internal High Speed oscillator (HSI) value.

-  *        This value is used by the RCC HAL module to compute the system frequency

-  *        (when HSI is used as system clock source, directly or through the PLL).

-  */

-#if !defined  (HSI_VALUE)

-  #define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz*/

-#endif /* HSI_VALUE */

-

-/**

-  * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.

-  *        This internal oscillator is mainly dedicated to provide a high precision clock to

-  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.

-  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency

-  *        which is subject to manufacturing process variations.

-  */

-#if !defined  (HSI48_VALUE)

-  #define HSI48_VALUE             48000000U /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.

-                                               The real value my vary depending on manufacturing process variations.*/

-#endif /* HSI48_VALUE */

-

-/**

-  * @brief Internal Low Speed oscillator (LSI) value.

-  */

-#if !defined  (LSI_VALUE)

-  #define LSI_VALUE  32000U     /*!< LSI Typical Value in Hz*/

-#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz

-                                                The real value may vary depending on the variations

-                                                in voltage and temperature.*/

-/**

-  * @brief External Low Speed oscillator (LSE) value.

-  *        This value is used by the UART, RTC HAL module to compute the system frequency

-  */

-#if !defined  (LSE_VALUE)

-  #define LSE_VALUE              32768U    /*!< Value of the External oscillator in Hz*/

-#endif /* LSE_VALUE */

-

-#if !defined  (LSE_STARTUP_TIMEOUT)

-  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */

-#endif /* LSE_STARTUP_TIMEOUT */

-

-/* Tip: To avoid modifying this file each time you need to use different HSE,

-   ===  you can define the HSE value in your toolchain compiler preprocessor. */

-

-/* ########################### System Configuration ######################### */

-/**

-  * @brief This is the HAL system configuration section

-  */

-

-#define  VDD_VALUE                    1710U /*!< Value of VDD in mv */

-#define  TICK_INT_PRIORITY            (3U)    /*!< tick interrupt priority (lowest by default) */

-#define  USE_RTOS                     0U

-#define  PREFETCH_ENABLE              0U

-#define  INSTRUCTION_CACHE_ENABLE     1U

-

-/* ########################## Assert Selection ############################## */

-/**

-  * @brief Uncomment the line below to expanse the "assert_param" macro in the

-  *        HAL drivers code

-  */

-

-/* #define USE_FULL_ASSERT    1U */

-

-/* ################## Register callback feature configuration ############### */

-/**

-  * @brief Set below the peripheral configuration  to "1U" to add the support

-  *        of HAL callback registration/unregistration feature for the HAL

-  *        driver(s). This allows user application to provide specific callback

-  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting

-  *        the default weak callback functions (see each stm32n6xx_hal_ppp.h file

-  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef

-  *        for each PPP peripheral).

-  */

-#define  USE_HAL_ADC_REGISTER_CALLBACKS        0U /* ADC register callback disabled       */

-#define  USE_HAL_CRYP_REGISTER_CALLBACKS       0U /* CRYP register callback disabled      */

-#define  USE_HAL_DAC_REGISTER_CALLBACKS        0U /* DAC register callback disabled       */

-#define  USE_HAL_I2C_REGISTER_CALLBACKS        0U /* I2C register callback disabled       */

-#define  USE_HAL_IWDG_REGISTER_CALLBACKS       0U /* IWDG register callback disabled      */

-#define  USE_HAL_IRDA_REGISTER_CALLBACKS       0U /* IRDA register callback disabled      */

-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS      0U /* LPTIM register callback disabled     */

-#define  USE_HAL_LCD_REGISTER_CALLBACKS        0U /* LCD register callback disabled      */

-#define  USE_HAL_PCD_REGISTER_CALLBACKS        0U /* PCD register callback disabled       */

-#define  USE_HAL_RNG_REGISTER_CALLBACKS        0U /* RNG register callback disabled       */

-#define  USE_HAL_RTC_REGISTER_CALLBACKS        0U /* RTC register callback disabled       */

-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */

-#define  USE_HAL_SPI_REGISTER_CALLBACKS        0U /* SPI register callback disabled       */

-#define  USE_HAL_TIM_REGISTER_CALLBACKS        0U /* TIM register callback disabled       */

-#define  USE_HAL_UART_REGISTER_CALLBACKS       0U /* UART register callback disabled      */

-#define  USE_HAL_USART_REGISTER_CALLBACKS      0U /* USART register callback disabled     */

-#define  USE_HAL_WWDG_REGISTER_CALLBACKS       0U /* WWDG register callback disabled      */

-

-/* Includes ------------------------------------------------------------------*/

-/**

-  * @brief Include module's header file

-  */

-

-#ifdef HAL_RCC_MODULE_ENABLED

-#include "stm32u0xx_hal_rcc.h"

-#endif /* HAL_RCC_MODULE_ENABLED */

-

-#ifdef HAL_GPIO_MODULE_ENABLED

-#include "stm32u0xx_hal_gpio.h"

-#endif /* HAL_GPIO_MODULE_ENABLED */

-

-#ifdef HAL_DMA_MODULE_ENABLED

-#include "stm32u0xx_hal_dma.h"

-#endif /* HAL_DMA_MODULE_ENABLED */

-

-#ifdef HAL_CORTEX_MODULE_ENABLED

-#include "stm32u0xx_hal_cortex.h"

-#endif /* HAL_CORTEX_MODULE_ENABLED */

-

-#ifdef HAL_ADC_MODULE_ENABLED

-#include "stm32u0xx_hal_adc.h"

-#include "stm32u0xx_hal_adc_ex.h"

-#endif /* HAL_ADC_MODULE_ENABLED */

-

-#ifdef HAL_COMP_MODULE_ENABLED

-#include "stm32u0xx_hal_comp.h"

-#endif /* HAL_COMP_MODULE_ENABLED */

-

-#ifdef HAL_CRC_MODULE_ENABLED

-#include "stm32u0xx_hal_crc.h"

-#endif /* HAL_CRC_MODULE_ENABLED */

-

-#ifdef HAL_CRS_MODULE_ENABLED

-#include "stm32u0xx_ll_crs.h"

-#endif /* HAL_CRS_MODULE_ENABLED */

-

-#ifdef HAL_CRYP_MODULE_ENABLED

-#include "stm32u0xx_hal_cryp.h"

-#endif /* HAL_CRYP_MODULE_ENABLED */

-

-#ifdef HAL_DAC_MODULE_ENABLED

-#include "stm32u0xx_hal_dac.h"

-#endif /* HAL_DAC_MODULE_ENABLED */

-

-#ifdef HAL_EXTI_MODULE_ENABLED

-#include "stm32u0xx_hal_exti.h"

-#endif /* HAL_EXTI_MODULE_ENABLED */

-

-#ifdef HAL_FLASH_MODULE_ENABLED

-#include "stm32u0xx_hal_flash.h"

-#endif /* HAL_FLASH_MODULE_ENABLED */

-

-#ifdef HAL_I2C_MODULE_ENABLED

-#include "stm32u0xx_hal_i2c.h"

-#endif /* HAL_I2C_MODULE_ENABLED */

-

-#ifdef HAL_IWDG_MODULE_ENABLED

-#include "stm32u0xx_hal_iwdg.h"

-#endif /* HAL_IWDG_MODULE_ENABLED */

-

-#ifdef HAL_LPTIM_MODULE_ENABLED

-#include "stm32u0xx_hal_lptim.h"

-#endif /* HAL_LPTIM_MODULE_ENABLED */

-

-#ifdef HAL_LCD_MODULE_ENABLED

-#include "stm32u0xx_hal_lcd.h"

-#endif /* HAL_LTDC_MODULE_ENABLED */

-

-#ifdef HAL_OPAMP_MODULE_ENABLED

-#include "stm32u0xx_hal_opamp.h"

-#endif /* HAL_OPAMP_MODULE_ENABLED */

-

-#ifdef HAL_PWR_MODULE_ENABLED

-#include "stm32u0xx_hal_pwr.h"

-#endif /* HAL_PWR_MODULE_ENABLED */

-

-#ifdef HAL_RNG_MODULE_ENABLED

-#include "stm32u0xx_hal_rng.h"

-#endif /* HAL_RNG_MODULE_ENABLED */

-

-#ifdef HAL_RTC_MODULE_ENABLED

-#include "stm32u0xx_hal_rtc.h"

-#endif /* HAL_RTC_MODULE_ENABLED */

-

-#ifdef HAL_SPI_MODULE_ENABLED

-#include "stm32u0xx_hal_spi.h"

-#endif /* HAL_SPI_MODULE_ENABLED */

-

-#ifdef HAL_TIM_MODULE_ENABLED

-#include "stm32u0xx_hal_tim.h"

-#endif /* HAL_TIM_MODULE_ENABLED */

-

-#ifdef HAL_TSC_MODULE_ENABLED

-#include "stm32u0xx_ll_system.h"

-#include "stm32u0xx_hal_tsc.h"

-#endif /* HAL_TSC_MODULE_ENABLED */

-

-#ifdef HAL_UART_MODULE_ENABLED

-#include "stm32u0xx_hal_uart.h"

-#endif /* HAL_UART_MODULE_ENABLED */

-

-#ifdef HAL_USART_MODULE_ENABLED

-#include "stm32u0xx_hal_usart.h"

-#endif /* HAL_USART_MODULE_ENABLED */

-

-#ifdef HAL_IRDA_MODULE_ENABLED

-#include "stm32u0xx_hal_irda.h"

-#endif /* HAL_IRDA_MODULE_ENABLED */

-

-#ifdef HAL_SMARTCARD_MODULE_ENABLED

-#include "stm32u0xx_hal_smartcard.h"

-#endif /* HAL_SMARTCARD_MODULE_ENABLED */

-

-#ifdef HAL_WWDG_MODULE_ENABLED

-#include "stm32u0xx_hal_wwdg.h"

-#endif /* HAL_WWDG_MODULE_ENABLED */

-

-#ifdef HAL_LCD_MODULE_ENABLED

-#include "stm32u0xx_hal_lcd.h"

-#endif /* HAL_LCD_MODULE_ENABLED */

-

-#ifdef HAL_PCD_MODULE_ENABLED

-#include "stm32u0xx_hal_pcd.h"

-#endif /* HAL_PCD_MODULE_ENABLED */

-

-/* Exported macro ------------------------------------------------------------*/

-#ifdef  USE_FULL_ASSERT

-/**

-  * @brief  The assert_param macro is used for function's parameters check.

-  * @param  expr: If expr is false, it calls assert_failed function

-  *         which reports the name of the source file and the source

-  *         line number of the call that failed.

-  *         If expr is true, it returns no value.

-  * @retval None

-  */

-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))

-/* Exported functions ------------------------------------------------------- */

-  void assert_failed(uint8_t *file, uint32_t line);

-#else

-  #define assert_param(expr) ((void)0U)

-#endif /* USE_FULL_ASSERT */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32U0xx_HAL_CONF_H */

-