tar'd chibi

3 files changed, 0 insertions, 218 deletions

diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c
deleted file mode 100644
index 9bae7ab..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-    Copyright (C) 2015 Fabio Utzig
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
-  .pads = {
-        PAL_MODE_OUTPUT_OPENDRAIN,    /* P0.0:  SDA      */
-        PAL_MODE_OUTPUT_OPENDRAIN,    /* P0.1:  SCL      */
-        PAL_MODE_UNCONNECTED,         /* P0.2 */
-        PAL_MODE_UNCONNECTED,         /* P0.3 */
-        PAL_MODE_UNCONNECTED,         /* P0.4 */
-        PAL_MODE_UNCONNECTED,         /* P0.5 */
-        PAL_MODE_UNCONNECTED,         /* P0.6 */
-        PAL_MODE_UNCONNECTED,         /* P0.7 */
-        PAL_MODE_UNCONNECTED,         /* P0.8   UART_RTS */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.9:  UART_TX  */
-        PAL_MODE_UNCONNECTED,         /* P0.10  UART_CTS */
-        PAL_MODE_INPUT_PULLUP,        /* P0.11: UART_RX  */
-        PAL_MODE_UNCONNECTED,         /* P0.12 */
-        PAL_MODE_UNCONNECTED,         /* P0.13 */
-        PAL_MODE_UNCONNECTED,         /* P0.14 */
-        PAL_MODE_UNCONNECTED,         /* P0.15 */
-        PAL_MODE_INPUT_PULLUP,        /* P0.16: KEY1     */
-        PAL_MODE_INPUT_PULLUP,        /* P0.17: KEY2     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.18: LED0     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.19: LED1     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.20: LED2     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.21: LED3     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.22: LED4     */
-        PAL_MODE_INPUT,               /* P0.23: SPI_MISO */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.24: SPI_MOSI */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.25: SPI_SCK  */
-        PAL_MODE_UNCONNECTED,         /* P0.26 */
-        PAL_MODE_UNCONNECTED,         /* P0.27 */
-        PAL_MODE_UNCONNECTED,         /* P0.28 */
-        PAL_MODE_UNCONNECTED,         /* P0.29 */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.30: SPI_NSS  */
-        PAL_MODE_UNCONNECTED,         /* P0.31 */
-  },
-};
-#endif
-
-/**
- * @brief   Early initialization code.
- * @details This initialization is performed just after reset before BSS and
- *          DATA segments initialization.
- */
-void __early_init(void)
-{
-}
-
-/**
- * @brief   Late initialization code.
- * @note    This initialization is performed after BSS and DATA segments
- *          initialization and before invoking the main() function.
- */
-void boardInit(void)
-{
-  //FIXME: not really needed yet
-  //NRF_CLOCK->XTALFREQ = 0xff;
-  //NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
-  //NRF_CLOCK->TASKS_HFCLKSTART = 1;
-  //while (!NRF_CLOCK->EVENTS_HFCLKSTARTED) {}
-}
diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h
deleted file mode 100644
index 5a4e8f0..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-    Copyright (C) 2015 Fabio Utzig
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/* Board identifier. */
-#define BOARD_WVSHARE_BLE400
-#define BOARD_NAME              "WvShare BLE400"
-
-/* Board oscillators-related settings. */
-#define NRF51_XTAL_VALUE        16000000
-
-/* GPIO pins. */
-#define KEY1           16
-#define KEY2           17
-#define LED0           18
-#define LED1           19
-#define LED2           20
-#define LED3           21
-#define LED4           22
-#define UART_TX        9
-#define UART_RX        11
-#define UART_RTS       8
-#define UART_CTS       10
-#define SPI_SCK        25
-#define SPI_MOSI       24
-#define SPI_MISO       23
-#define SPI_SS         30
-#define I2C_SCL        1
-#define I2C_SDA        0
-#define AIN0           26
-#define AIN1           27
-#define AIN2            1
-#define AIN3            2
-#define AIN4            3
-#define AIN5            4
-#define AIN6            5
-#define AIN7            6
-#define AREF0           0
-#define AREF1           6
-
-/*
- * IO pins assignments.
- */
-#define IOPORT1_KEY1           16U
-#define IOPORT1_KEY2           17U
-#define IOPORT1_LED0           18U
-#define IOPORT1_LED1           19U
-#define IOPORT1_LED2           20U
-#define IOPORT1_LED3           21U
-#define IOPORT1_LED4           22U
-#define IOPORT1_UART_TX         9U
-#define IOPORT1_UART_RX        11U
-#define IOPORT1_UART_RTS        8U
-#define IOPORT1_UART_CTS       10U
-#define IOPORT1_SPI_SCK        25U
-#define IOPORT1_SPI_MOSI       24U
-#define IOPORT1_SPI_MISO       23U
-#define IOPORT1_SPI_SS         30U
-#define IOPORT1_I2C_SCL         1U
-#define IOPORT1_I2C_SDA         0U
-#define IOPORT1_AIN0           26U
-#define IOPORT1_AIN1           27U
-#define IOPORT1_AIN2            1U
-#define IOPORT1_AIN3            2U
-#define IOPORT1_AIN4            3U
-#define IOPORT1_AIN5            4U
-#define IOPORT1_AIN6            5U
-#define IOPORT1_AIN7            6U
-#define IOPORT1_AREF0           0U
-#define IOPORT1_AREF1           6U
-
-/*
- * IO lines assignments.
- */
-#define LINE_KEY1       PAL_LINE(IOPORT1, IOPORT1_KEY1)
-#define LINE_KEY2       PAL_LINE(IOPORT1, IOPORT1_KEY2)
-#define LINE_LED0       PAL_LINE(IOPORT1, IOPORT1_LED0)
-#define LINE_LED1       PAL_LINE(IOPORT1, IOPORT1_LED1)
-#define LINE_LED2       PAL_LINE(IOPORT1, IOPORT1_LED2)
-#define LINE_LED3       PAL_LINE(IOPORT1, IOPORT1_LED3)
-#define LINE_LED4       PAL_LINE(IOPORT1, IOPORT1_LED4)
-#define LINE_UART_TX    PAL_LINE(IOPORT1, IOPORT1_UART_TX)
-#define LINE_UART_RX    PAL_LINE(IOPORT1, IOPORT1_UART_RX)
-#define LINE_UART_RTS   PAL_LINE(IOPORT1, IOPORT1_UART_RTS)
-#define LINE_UART_CTS   PAL_LINE(IOPORT1, IOPORT1_UART_CTS)
-#define LINE_SPI_SCK    PAL_LINE(IOPORT1, IOPORT1_SPI_SCK)
-#define LINE_SPI_MOSI   PAL_LINE(IOPORT1, IOPORT1_SPI_MOSI)
-#define LINE_SPI_MISO   PAL_LINE(IOPORT1, IOPORT1_SPI_MISO)
-#define LINE_SPI_SS     PAL_LINE(IOPORT1, IOPORT1_SPI_SS)
-#define LINE_I2C_SCL    PAL_LINE(IOPORT1, IOPORT1_I2C_SCL)
-#define LINE_I2C_SDA    PAL_LINE(IOPORT1, IOPORT1_I2C_SDA)
-#define LINE_AIN0       PAL_LINE(IOPORT1, IOPORT1_AIN0)
-#define LINE_AIN1       PAL_LINE(IOPORT1, IOPORT1_AIN1)
-#define LINE_AIN2       PAL_LINE(IOPORT1, IOPORT1_AIN2)
-#define LINE_AIN3       PAL_LINE(IOPORT1, IOPORT1_AIN3)
-#define LINE_AIN4       PAL_LINE(IOPORT1, IOPORT1_AIN4)
-#define LINE_AIN5       PAL_LINE(IOPORT1, IOPORT1_AIN5)
-#define LINE_AIN6       PAL_LINE(IOPORT1, IOPORT1_AIN6)
-#define LINE_AIN7       PAL_LINE(IOPORT1, IOPORT1_AIN7)
-#define LINE_AREF0      PAL_LINE(IOPORT1, IOPORT1_AREF0)
-#define LINE_AREF1      PAL_LINE(IOPORT1, IOPORT1_AREF1)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk
deleted file mode 100644
index ade4201..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/WVSHARE_BLE400/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/WVSHARE_BLE400