diff options
| author | Clyne Sullivan <tullivan99@gmail.com> | 2016-11-11 15:15:16 -0500 |
|---|---|---|
| committer | Clyne Sullivan <tullivan99@gmail.com> | 2016-11-11 15:15:16 -0500 |
| commit | 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 (patch) | |
| tree | db8d337eb96c44feff77d5564eb9da697e8b961b /ChibiOS_16.1.5/community/os/hal/ports/NRF51 | |
| parent | 7772ea4579a45bcf63ebd5e68be66ba1a9c72dfa (diff) | |
tar'd chibi
Diffstat (limited to 'ChibiOS_16.1.5/community/os/hal/ports/NRF51')
30 files changed, 0 insertions, 14474 deletions
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c deleted file mode 100644 index 7f3413c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c +++ /dev/null @@ -1,227 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51Fx22/adc_lld.c
- * @brief NRF51Fx22 ADC subsystem low level driver source.
- *
- * @addtogroup ADC
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_ADC || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-#define ADC_CHANNEL_MASK 0x7
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/** @brief ADC1 driver identifier.*/
-#if NRF51_ADC_USE_ADC1 || defined(__DOXYGEN__)
-ADCDriver ADCD1;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-static void adc_lld_config_next_channel(ADCDriver *adcp, uint32_t config) {
-
- /* Default to all analog input pins disabled */
- config &= ~ADC_CONFIG_PSEL_Msk;
-
- if (adcp->grpp->channel_mask) {
- /* Skip to the next channel */
- while (((1 << adcp->current_channel) & adcp->grpp->channel_mask) == 0)
- adcp->current_channel = (adcp->current_channel + 1) & ADC_CHANNEL_MASK;
- config |= (((1 << adcp->current_channel) << ADC_CONFIG_PSEL_Pos) & ADC_CONFIG_PSEL_Msk);
- }
-
- /* Setup analog input pin select and user config values */
- adcp->adc->CONFIG = config;
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if NRF51_ADC_USE_ADC1 || defined(__DOXYGEN__)
-/**
- * @brief ADC interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector5C) {
-
- ADCDriver *adcp = &ADCD1;
- NRF_ADC_Type *adc = adcp->adc;
- bool more = true;
-
- OSAL_IRQ_PROLOGUE();
-
- /* Clear the ADC event */
- adc->EVENTS_END = 0;
-
- /* Read the sample into the buffer */
- adcp->samples[adcp->current_index++] = adc->RESULT;
-
- /* At the end of the buffer then we may be finished */
- if (adcp->current_index == adcp->number_of_samples) {
- _adc_isr_full_code(adcp);
-
- adcp->current_index = 0;
-
- /* We are never finished in circular mode */
- more = adcp->grpp->circular;
- }
-
- if (more) {
-
- /* Signal half completion in circular mode. */
- if (adcp->grpp->circular &&
- (adcp->current_index == (adcp->number_of_samples / 2))) {
-
- _adc_isr_half_code(adcp);
- }
-
- /* Skip to the next channel */
- adcp->current_channel = (adcp->current_channel + 1) & ADC_CHANNEL_MASK;
- adc_lld_config_next_channel(adcp, adcp->adc->CONFIG);
- adcp->adc->TASKS_START = 1;
- } else {
- adc_lld_stop_conversion(adcp);
- }
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level ADC driver initialization.
- *
- * @notapi
- */
-void adc_lld_init(void) {
-
-#if NRF51_ADC_USE_ADC1
- /* Driver initialization.*/
- adcObjectInit(&ADCD1);
- ADCD1.adc = NRF_ADC;
-#endif
-}
-
-/**
- * @brief Configures and activates the ADC peripheral.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_start(ADCDriver *adcp) {
-
- /* If in stopped state then configures and enables the ADC. */
- if (adcp->state == ADC_STOP) {
-#if NRF51_ADC_USE_ADC1
- if (&ADCD1 == adcp) {
-
- adcp->adc->INTENSET = ADC_INTENSET_END_Enabled << ADC_INTENSET_END_Pos;
- nvicEnableVector(ADC_IRQn, NRF51_ADC_IRQ_PRIORITY);
- }
-#endif /* NRF51_ADC_USE_ADC1 */
- }
-}
-
-/**
- * @brief Deactivates the ADC peripheral.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_stop(ADCDriver *adcp) {
-
- /* If in ready state then disables the ADC clock and analog part.*/
- if (adcp->state == ADC_READY) {
-
-#if NRF51_ADC_USE_ADC1
- if (&ADCD1 == adcp) {
-
- nvicDisableVector(ADC_IRQn);
- adcp->adc->INTENCLR = ADC_INTENCLR_END_Clear << ADC_INTENCLR_END_Pos;
- adc_lld_stop_conversion(adcp);
- }
-#endif
- }
-}
-
-/**
- * @brief Starts an ADC conversion.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_start_conversion(ADCDriver *adcp) {
-
- NRF_ADC_Type *adc = adcp->adc;
-
- adcp->number_of_samples = adcp->depth * adcp->grpp->num_channels;
- adcp->current_index = 0;
-
- /* At least one sample must be configured */
- osalDbgAssert(adcp->number_of_samples, "must configure at least one sample");
-
- /* Skip to the next channel */
- adcp->current_channel = 0;
- adc_lld_config_next_channel(adcp, adcp->grpp->cfg);
-
- /* Enable and start the conversion */
- adc->ENABLE = ADC_ENABLE_ENABLE_Enabled << ADC_ENABLE_ENABLE_Pos;
- adc->TASKS_START = 1;
-}
-
-/**
- * @brief Stops an ongoing conversion.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_stop_conversion(ADCDriver *adcp) {
-
- NRF_ADC_Type *adc = adcp->adc;
-
- adc->TASKS_STOP = 1;
- adc->ENABLE = ADC_ENABLE_ENABLE_Disabled << ADC_ENABLE_ENABLE_Pos;
-}
-
-#endif /* HAL_USE_ADC */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h deleted file mode 100644 index 36854fb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h +++ /dev/null @@ -1,229 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51x22/adc_lld.h
- * @brief NRF51x22 ADC subsystem low level driver header.
- *
- * @addtogroup ADC
- * @{
- */
-
-#ifndef HAL_ADC_LLD_H
-#define HAL_ADC_LLD_H
-
-#if HAL_USE_ADC || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief ADC1 driver enable switch.
- * @details If set to @p TRUE the support for ADC1 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF51_ADC_USE_ADC1) || defined(__DOXYGEN__)
-#define NRF51_ADC_USE_ADC1 FALSE
-#endif
-
-/**
- * @brief ADC interrupt priority level setting.
- */
-#if !defined(NRF51_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_ADC_IRQ_PRIORITY 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if !NRF51_ADC_USE_ADC1
-#error "ADC driver activated but no ADC peripheral assigned"
-#endif
-
-#if NRF51_ADC_USE_ADC1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_ADC_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to ADC1"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief ADC sample data type.
- */
-typedef uint16_t adcsample_t;
-
-/**
- * @brief Channels number in a conversion group.
- */
-typedef uint8_t adc_channels_num_t;
-
-/**
- * @brief Type of a structure representing an ADC driver.
- */
-typedef struct ADCDriver ADCDriver;
-
-/**
- * @brief ADC notification callback type.
- *
- * @param[in] adcp pointer to the @p ADCDriver object triggering the
- * callback
- * @param[in] buffer pointer to the most recent samples data
- * @param[in] n number of buffer rows available starting from @p buffer
- */
-typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
-
-/**
- * @brief Conversion group configuration structure.
- * @details This implementation-dependent structure describes a conversion
- * operation.
- * @note The use of this configuration structure requires knowledge of
- * STM32 ADC cell registers interface, please refer to the STM32
- * reference manual for details.
- */
-typedef struct {
- /**
- * @brief Enables the circular buffer mode for the group.
- */
- bool circular;
- /**
- * @brief Number of the analog channels belonging to the conversion group.
- */
- adc_channels_num_t num_channels;
- /**
- * @brief Callback function associated to the group or @p NULL.
- */
- adccallback_t end_cb;
- /* End of the mandatory fields.*/
- /**
- * @brief Bitmask of channels for ADC conversion.
- */
- uint32_t channel_mask;
- /**
- * @brief ADC CONFIG register details.
- * @note All the required bits must be defined into this field.
- */
- uint32_t cfg;
-} ADCConversionGroup;
-
-/**
- * @brief Driver configuration structure.
- * @note It could be empty on some architectures.
- */
-typedef struct {
- uint32_t dummy;
-} ADCConfig;
-
-/**
- * @brief Structure representing an ADC driver.
- */
-struct ADCDriver {
- /**
- * @brief Driver state.
- */
- adcstate_t state;
- /**
- * @brief Current configuration data.
- */
- const ADCConfig *config;
- /**
- * @brief Current samples buffer pointer or @p NULL.
- */
- adcsample_t *samples;
- /**
- * @brief Current samples buffer depth or @p 0.
- */
- size_t depth;
- /**
- * @brief Current conversion group pointer or @p NULL.
- */
- const ADCConversionGroup *grpp;
-#if ADC_USE_WAIT || defined(__DOXYGEN__)
- /**
- * @brief Waiting thread.
- */
- thread_reference_t thread;
-#endif
-#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the peripheral.
- */
- mutex_t mutex;
-#endif /* ADC_USE_MUTUAL_EXCLUSION */
-#if defined(ADC_DRIVER_EXT_FIELDS)
- ADC_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the ADCx registers block.
- */
- NRF_ADC_Type *adc;
- /**
- * @brief Number of samples expected.
- */
- size_t number_of_samples;
- /**
- * @brief Current position in the buffer.
- */
- size_t current_index;
- /**
- * @brief Current channel index into group channel_mask.
- */
- size_t current_channel;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if NRF51_ADC_USE_ADC1 && !defined(__DOXYGEN__)
-extern ADCDriver ADCD1;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void adc_lld_init(void);
- void adc_lld_start(ADCDriver *adcp);
- void adc_lld_stop(ADCDriver *adcp);
- void adc_lld_start_conversion(ADCDriver *adcp);
- void adc_lld_stop_conversion(ADCDriver *adcp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_ADC */
-
-#endif /* HAL_ADC_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c deleted file mode 100644 index 47736c7..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c +++ /dev/null @@ -1,168 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/ext_lld.c
- * @brief NRF51822 EXT subsystem low level driver source.
- *
- * @addtogroup EXT
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_EXT || defined(__DOXYGEN__)
-
-#include "hal_ext_lld_isr.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/**
- * @brief EXTD1 driver identifier.
- */
-EXTDriver EXTD1;
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level EXT driver initialization.
- *
- * @notapi
- */
-void ext_lld_init(void) {
-
- /* Driver initialization.*/
- extObjectInit(&EXTD1);
-}
-
-/**
- * @brief Configures and activates the EXT peripheral.
- *
- * @param[in] extp pointer to the @p EXTDriver object
- *
- * @notapi
- */
-void ext_lld_start(EXTDriver *extp) {
-
- unsigned i;
-
- ext_lld_exti_irq_enable();
-
- /* Configuration of automatic channels.*/
- for (i = 0; i < EXT_MAX_CHANNELS; i++) {
- uint32_t config = 0;
- uint32_t pad = (extp->config->channels[i].mode & EXT_MODE_GPIO_MASK)
- >> EXT_MODE_GPIO_OFFSET;
-
- if (extp->config->channels[i].mode & EXT_CH_MODE_BOTH_EDGES)
- config |= (GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos);
- else if (extp->config->channels[i].mode & EXT_CH_MODE_RISING_EDGE)
- config |= (GPIOTE_CONFIG_POLARITY_LoToHi << GPIOTE_CONFIG_POLARITY_Pos);
- else
- config |= (GPIOTE_CONFIG_POLARITY_HiToLo << GPIOTE_CONFIG_POLARITY_Pos);
-
- config |= (pad << GPIOTE_CONFIG_PSEL_Pos);
-
- NRF_GPIOTE->CONFIG[i] = config;
- NRF_GPIOTE->EVENTS_PORT = 0;
- NRF_GPIOTE->EVENTS_IN[i] = 0;
-
- if (extp->config->channels[i].mode & EXT_CH_MODE_AUTOSTART)
- ext_lld_channel_enable(extp, i);
- else
- ext_lld_channel_disable(extp, i);
- }
-}
-
-/**
- * @brief Deactivates the EXT peripheral.
- *
- * @param[in] extp pointer to the @p EXTDriver object
- *
- * @notapi
- */
-void ext_lld_stop(EXTDriver *extp) {
-
- unsigned i;
-
- (void)extp;
- ext_lld_exti_irq_disable();
-
- for (i = 0; i < EXT_MAX_CHANNELS; i++)
- NRF_GPIOTE->CONFIG[i] = 0;
-
- NRF_GPIOTE->INTENCLR =
- (GPIOTE_INTENCLR_IN3_Msk | GPIOTE_INTENCLR_IN2_Msk |
- GPIOTE_INTENCLR_IN1_Msk | GPIOTE_INTENCLR_IN0_Msk);
-}
-
-/**
- * @brief Enables an EXT channel.
- *
- * @param[in] extp pointer to the @p EXTDriver object
- * @param[in] channel channel to be enabled
- *
- * @notapi
- */
-void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) {
-
- uint32_t config = NRF_GPIOTE->CONFIG[channel] & ~GPIOTE_CONFIG_MODE_Msk;
-
- (void)extp;
- config |= (GPIOTE_CONFIG_MODE_Event << GPIOTE_CONFIG_MODE_Pos);
-
- NRF_GPIOTE->CONFIG[channel] = config;
- NRF_GPIOTE->INTENSET = (1 << channel);
-}
-
-/**
- * @brief Disables an EXT channel.
- *
- * @param[in] extp pointer to the @p EXTDriver object
- * @param[in] channel channel to be disabled
- *
- * @notapi
- */
-void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) {
-
- (void)extp;
- NRF_GPIOTE->CONFIG[channel] &= ~GPIOTE_CONFIG_MODE_Msk;
- NRF_GPIOTE->INTENCLR = (1 << channel);
-}
-
-#endif /* HAL_USE_EXT */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h deleted file mode 100644 index 37ae721..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/ext_lld.h
- * @brief NRF51822 GPIOTE subsystem low level driver header.
- *
- * @addtogroup EXT
- * @{
- */
-
-#ifndef HAL_EXT_LLD_H
-#define HAL_EXT_LLD_H
-
-#if HAL_USE_EXT || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/**
- * @brief Available number of EXT channels.
- */
-#define EXT_MAX_CHANNELS 4
-#define EXT_MODE_GPIO_MASK 0xF8 /**< @brief Pad field mask. */
-#define EXT_MODE_GPIO_OFFSET 3 /**< @brief Pad field offset. */
-/** @} */
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief EXT channel identifier.
- */
-typedef uint32_t expchannel_t;
-
-/**
- * @brief Type of an EXT generic notification callback.
- *
- * @param[in] extp pointer to the @p EXPDriver object triggering the
- * callback
- */
-typedef void (*extcallback_t)(EXTDriver *extp, expchannel_t channel);
-
-/**
- * @brief Channel configuration structure.
- */
-typedef struct {
- /**
- * @brief Channel mode.
- */
- uint32_t mode;
- /**
- * @brief Channel callback.
- * @details In the STM32 implementation a @p NULL callback pointer is
- * valid and configures the channel as an event sources instead
- * of an interrupt source.
- */
- extcallback_t cb;
-} EXTChannelConfig;
-
-/**
- * @brief Driver configuration structure.
- * @note It could be empty on some architectures.
- */
-typedef struct {
- /**
- * @brief Channel configurations.
- */
- EXTChannelConfig channels[EXT_MAX_CHANNELS];
- /* End of the mandatory fields.*/
-} EXTConfig;
-
-/**
- * @brief Structure representing an EXT driver.
- */
-struct EXTDriver {
- /**
- * @brief Driver state.
- */
- extstate_t state;
- /**
- * @brief Current configuration data.
- */
- const EXTConfig *config;
- /* End of the mandatory fields.*/
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if !defined(__DOXYGEN__)
-extern EXTDriver EXTD1;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void ext_lld_init(void);
- void ext_lld_start(EXTDriver *extp);
- void ext_lld_stop(EXTDriver *extp);
- void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel);
- void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_EXT */
-
-#endif /* HAL_EXT_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c deleted file mode 100644 index 52f07d6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c +++ /dev/null @@ -1,110 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51x22/ext_lld_isr.h
- * @brief NRF51x22 EXT subsystem low level driver ISR code.
- *
- * @addtogroup EXT
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_EXT || defined(__DOXYGEN__)
-
-#include "hal_ext_lld_isr.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/**
- * @brief EXTI[0]...EXTI[1] interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector58) {
-
- OSAL_IRQ_PROLOGUE();
-
- if (NRF_GPIOTE->EVENTS_IN[0])
- {
- NRF_GPIOTE->EVENTS_IN[0] = 0;
- EXTD1.config->channels[0].cb(&EXTD1, 0);
- }
- if (NRF_GPIOTE->EVENTS_IN[1])
- {
- NRF_GPIOTE->EVENTS_IN[1] = 0;
- EXTD1.config->channels[1].cb(&EXTD1, 1);
- }
- if (NRF_GPIOTE->EVENTS_IN[2])
- {
- NRF_GPIOTE->EVENTS_IN[2] = 0;
- EXTD1.config->channels[2].cb(&EXTD1, 2);
- }
- if (NRF_GPIOTE->EVENTS_IN[3])
- {
- NRF_GPIOTE->EVENTS_IN[3] = 0;
- EXTD1.config->channels[3].cb(&EXTD1, 3);
- }
-
- OSAL_IRQ_EPILOGUE();
-}
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Enables EXTI IRQ sources.
- *
- * @notapi
- */
-void ext_lld_exti_irq_enable(void) {
-
- nvicEnableVector(GPIOTE_IRQn, NRF51_EXT_GPIOTE_IRQ_PRIORITY);
-}
-
-/**
- * @brief Disables EXTI IRQ sources.
- *
- * @notapi
- */
-void ext_lld_exti_irq_disable(void) {
-
- nvicDisableVector(GPIOTE_IRQn);
-}
-
-#endif /* HAL_USE_EXT */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h deleted file mode 100644 index 736e55c..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h +++ /dev/null @@ -1,79 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51x22/ext_lld_isr.h
- * @brief NRF51x22 EXT subsystem low level driver ISR header.
- *
- * @addtogroup EXT
- * @{
- */
-
-#ifndef HAL_EXT_LLD_ISR_H
-#define HAL_EXT_LLD_ISR_H
-
-#if HAL_USE_EXT || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief GPIOTE interrupt priority level setting.
- */
-#if !defined(NRF51_EXT_GPIOTE_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_EXT_GPIOTE_IRQ_PRIORITY 3
-#endif
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void ext_lld_exti_irq_enable(void);
- void ext_lld_exti_irq_disable(void);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_EXT */
-
-#endif /* HAL_EXT_LLD_ISR_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c deleted file mode 100644 index f39470f..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c +++ /dev/null @@ -1,358 +0,0 @@ -/*
- ChibiOS - 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51x22/gpt_lld.c
- * @brief NRF51x22 GPT subsystem low level driver source.
- *
- * @addtogroup GPT
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_GPT || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#define NRF51_TIMER_PRESCALER_NUM 10
-#define NRF51_TIMER_COMPARE_NUM 4
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/**
- * @brief GPTD1 driver identifier.
- * @note The driver GPTD1 allocates the complex timer TIM1 when enabled.
- */
-#if NRF51_GPT_USE_TIMER0 || defined(__DOXYGEN__)
-GPTDriver GPTD1;
-#endif
-
-/**
- * @brief GPTD2 driver identifier.
- * @note The driver GPTD2 allocates the timer TIM2 when enabled.
- */
-#if NRF51_GPT_USE_TIMER1 || defined(__DOXYGEN__)
-GPTDriver GPTD2;
-#endif
-
-/**
- * @brief GPTD3 driver identifier.
- * @note The driver GPTD3 allocates the timer TIM3 when enabled.
- */
-#if NRF51_GPT_USE_TIMER2 || defined(__DOXYGEN__)
-GPTDriver GPTD3;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-static uint8_t prescaler(uint16_t freq)
-{
- uint8_t i;
- static const gptfreq_t frequencies[] = {
- NRF51_GPT_FREQ_16MHZ,
- NRF51_GPT_FREQ_8MHZ,
- NRF51_GPT_FREQ_4MHZ,
- NRF51_GPT_FREQ_2MHZ,
- NRF51_GPT_FREQ_1MHZ,
- NRF51_GPT_FREQ_500KHZ,
- NRF51_GPT_FREQ_250KHZ,
- NRF51_GPT_FREQ_125KHZ,
- NRF51_GPT_FREQ_62500HZ,
- NRF51_GPT_FREQ_31250HZ,
- };
-
- for (i = 0; i < NRF51_TIMER_PRESCALER_NUM; i++)
- if (freq == frequencies[i])
- return i;
-
- osalDbgAssert(FALSE, "invalid timer frequency");
-
- return 0;
-}
-
-/**
- * @brief Shared IRQ handler.
- *
- * @param[in] gptp pointer to a @p GPTDriver object
- */
-static void gpt_lld_serve_interrupt(GPTDriver *gptp) {
-
- gptp->tim->EVENTS_COMPARE[gptp->cc_int] = 0;
- if (gptp->state == GPT_ONESHOT)
- gptp->state = GPT_READY; /* Back in GPT_READY state. */
- gptp->config->callback(gptp);
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if NRF51_GPT_USE_TIMER0
-/**
- * @brief TIMER0 interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector60) {
-
- OSAL_IRQ_PROLOGUE();
-
- gpt_lld_serve_interrupt(&GPTD1);
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* NRF51_GPT_USE_TIMER0 */
-
-#if NRF51_GPT_USE_TIMER1
-/**
- * @brief TIMER1 interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector64) {
-
- OSAL_IRQ_PROLOGUE();
-
- gpt_lld_serve_interrupt(&GPTD2);
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* NRF51_GPT_USE_TIMER1 */
-
-#if NRF51_GPT_USE_TIMER2
-/**
- * @brief TIMER2 interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector68) {
-
- OSAL_IRQ_PROLOGUE();
-
- gpt_lld_serve_interrupt(&GPTD3);
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* NRF51_GPT_USE_TIMER2 */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level GPT driver initialization.
- *
- * @notapi
- */
-void gpt_lld_init(void) {
-
-#if NRF51_GPT_USE_TIMER0
- /* Driver initialization.*/
- GPTD1.tim = NRF_TIMER0;
- gptObjectInit(&GPTD1);
-#endif
-
-#if NRF51_GPT_USE_TIMER1
- /* Driver initialization.*/
- GPTD2.tim = NRF_TIMER1;
- gptObjectInit(&GPTD2);
-#endif
-
-#if NRF51_GPT_USE_TIMER2
- /* Driver initialization.*/
- GPTD3.tim = NRF_TIMER2;
- gptObjectInit(&GPTD3);
-#endif
-}
-
-/**
- * @brief Configures and activates the GPT peripheral.
- *
- * @param[in] gptp pointer to the @p GPTDriver object
- *
- * @notapi
- */
-void gpt_lld_start(GPTDriver *gptp) {
-
- NRF_TIMER_Type *tim = gptp->tim;
-
- if (gptp->state == GPT_STOP) {
- osalDbgAssert(gptp->cc_int < NRF51_TIMER_COMPARE_NUM,
- "invalid capture/compare index");
-
- tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
-#if NRF51_GPT_USE_TIMER0
- if (&GPTD1 == gptp)
- nvicEnableVector(TIMER0_IRQn, NRF51_GPT_TIMER0_IRQ_PRIORITY);
-#endif
-#if NRF51_GPT_USE_TIMER1
- if (&GPTD2 == gptp)
- nvicEnableVector(TIMER1_IRQn, NRF51_GPT_TIMER1_IRQ_PRIORITY);
-#endif
-#if NRF51_GPT_USE_TIMER2
- if (&GPTD3 == gptp)
- nvicEnableVector(TIMER2_IRQn, NRF51_GPT_TIMER2_IRQ_PRIORITY);
-#endif
- }
-
- /* Prescaler value calculation.*/
- tim->PRESCALER = prescaler(gptp->config->frequency);
-
- /* Timer configuration.*/
- tim->MODE = TIMER_MODE_MODE_Timer << TIMER_MODE_MODE_Pos;
-
- switch (gptp->config->resolution) {
-
- case 8:
- tim->BITMODE = TIMER_BITMODE_BITMODE_08Bit << TIMER_BITMODE_BITMODE_Pos;
- break;
-
- case 16:
- tim->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
- break;
-
-#if NRF51_GPT_USE_TIMER0
- case 24:
- tim->BITMODE = TIMER_BITMODE_BITMODE_24Bit << TIMER_BITMODE_BITMODE_Pos;
- break;
-
- case 32:
- tim->BITMODE = TIMER_BITMODE_BITMODE_32Bit << TIMER_BITMODE_BITMODE_Pos;
- break;
-#endif
-
- default:
- osalDbgAssert(FALSE, "invalid timer resolution");
- break;
- };
-}
-
-/**
- * @brief Deactivates the GPT peripheral.
- *
- * @param[in] gptp pointer to the @p GPTDriver object
- *
- * @notapi
- */
-void gpt_lld_stop(GPTDriver *gptp) {
-
- if (gptp->state == GPT_READY) {
- gptp->tim->TASKS_SHUTDOWN = 1;
-
-#if NRF51_GPT_USE_TIMER0
- if (&GPTD1 == gptp)
- nvicDisableVector(TIMER0_IRQn);
-#endif
-#if NRF51_GPT_USE_TIMER1
- if (&GPTD2 == gptp)
- nvicDisableVector(TIMER1_IRQn);
-#endif
-#if NRF51_GPT_USE_TIMER2
- if (&GPTD3 == gptp)
- nvicDisableVector(TIMER2_IRQn);
-#endif
- gptp->tim->INTENCLR = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
- }
-}
-
-/**
- * @brief Starts the timer in continuous mode.
- *
- * @param[in] gptp pointer to the @p GPTDriver object
- * @param[in] interval period in ticks
- *
- * @notapi
- */
-void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) {
-
- NRF_TIMER_Type *tim = gptp->tim;
-
- tim->TASKS_CLEAR = 1;
- tim->CC[gptp->cc_int] = (uint32_t)(interval - 1); /* Time constant. */
- if (gptp->state == GPT_ONESHOT)
- gptp->tim->SHORTS = TIMER_SHORTS_COMPARE0_STOP_Msk << gptp->cc_int;
- else if (gptp->state == GPT_CONTINUOUS)
- gptp->tim->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Msk << gptp->cc_int;
- tim->TASKS_START = 1;
-}
-
-/**
- * @brief Stops the timer.
- *
- * @param[in] gptp pointer to the @p GPTDriver object
- *
- * @notapi
- */
-void gpt_lld_stop_timer(GPTDriver *gptp) {
-
- gptp->tim->TASKS_STOP = 1;
-}
-
-/**
- * @brief Starts the timer in one shot mode and waits for completion.
- * @details This function specifically polls the timer waiting for completion
- * in order to not have extra delays caused by interrupt servicing,
- * this function is only recommended for short delays.
- *
- * @param[in] gptp pointer to the @p GPTDriver object
- * @param[in] interval time interval in ticks
- *
- * @notapi
- */
-void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) {
-
- NRF_TIMER_Type *tim = gptp->tim;
-
- tim->INTENCLR = (1UL << gptp->cc_int) << TIMER_INTENSET_COMPARE0_Pos;
- tim->TASKS_CLEAR = 1;
- tim->CC[gptp->cc_int] = (uint32_t)(interval - 1); /* Time constant. */
- tim->TASKS_START = 1;
- while (!(tim->INTENSET & (TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int)))
- ;
- tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
-}
-
-/**
- * @brief Returns the counter value of GPT peripheral.
- * @pre The GPT unit must be running in continuous mode.
- * @note The nature of the counter is not defined, it may count upward
- * or downward, it could be continuously running or not.
- *
- * @param[in] gptp pointer to a @p GPTDriver object
- * @return The current counter value.
- *
- * @notapi
- */
-gptcnt_t gpt_lld_get_counter(GPTDriver *gptp) {
-
- gptp->tim->TASKS_CAPTURE[gptp->cc_get] = 1;
- return gptp->tim->CC[gptp->cc_get];
-}
-
-#endif /* HAL_USE_GPT */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h deleted file mode 100644 index 9b4cc9b..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h +++ /dev/null @@ -1,264 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51x22/gpt_lld.h
- * @brief NRF51x22 GPT subsystem low level driver header.
- *
- * @addtogroup GPT
- * @{
- */
-
-#ifndef HAL_GPT_LLD_H
-#define HAL_GPT_LLD_H
-
-#if HAL_USE_GPT || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief GPTD1 driver enable switch.
- * @details If set to @p TRUE the support for GPTD1 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(NRF51_GPT_USE_TIMER0) || defined(__DOXYGEN__)
-#define NRF51_GPT_USE_TIMER0 FALSE
-#endif
-
-/**
- * @brief GPTD2 driver enable switch.
- * @details If set to @p TRUE the support for GPTD2 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(NRF51_GPT_USE_TIMER1) || defined(__DOXYGEN__)
-#define NRF51_GPT_USE_TIMER1 FALSE
-#endif
-
-/**
- * @brief GPTD3 driver enable switch.
- * @details If set to @p TRUE the support for GPTD3 is included.
- * @note The default is @p TRUE.
- */
-#if !defined(NRF51_GPT_USE_TIMER2) || defined(__DOXYGEN__)
-#define NRF51_GPT_USE_TIMER2 FALSE
-#endif
-
-/**
- * @brief GPTD1 interrupt priority level setting.
- */
-#if !defined(NRF51_GPT_TIMER0_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_GPT_TIMER0_IRQ_PRIORITY 3
-#endif
-
-/**
- * @brief GPTD2 interrupt priority level setting.
- */
-#if !defined(NRF51_GPT_TIMER1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_GPT_TIMER1_IRQ_PRIORITY 3
-#endif
-
-/**
- * @brief GPTD3 interrupt priority level setting.
- */
-#if !defined(NRF51_GPT_TIMER2_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_GPT_TIMER2_IRQ_PRIORITY 3
-#endif
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if !NRF51_GPT_USE_TIMER0 && !NRF51_GPT_USE_TIMER1 && \
- !NRF51_GPT_USE_TIMER2
-#error "GPT driver activated but no TIMER peripheral assigned"
-#endif
-
-#if NRF51_GPT_USE_TIMER0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER0_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to TIMER0"
-#endif
-
-#if NRF51_GPT_USE_TIMER1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER1_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to TIMER1"
-#endif
-
-#if NRF51_GPT_USE_TIMER2 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER2_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to TIMER2"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief GPT frequency type.
- */
-typedef enum {
- NRF51_GPT_FREQ_31250HZ = 31250,
- NRF51_GPT_FREQ_62500HZ = 62500,
- NRF51_GPT_FREQ_125KHZ = 125000,
- NRF51_GPT_FREQ_250KHZ = 250000,
- NRF51_GPT_FREQ_500KHZ = 500000,
- NRF51_GPT_FREQ_1MHZ = 1000000,
- NRF51_GPT_FREQ_2MHZ = 2000000,
- NRF51_GPT_FREQ_4MHZ = 4000000,
- NRF51_GPT_FREQ_8MHZ = 8000000,
- NRF51_GPT_FREQ_16MHZ = 16000000,
-} gptfreq_t;
-
-/**
- * @brief GPT counter type.
- */
-typedef uint32_t gptcnt_t;
-
-/**
- * @brief Driver configuration structure.
- * @note It could be empty on some architectures.
- */
-typedef struct {
- /**
- * @brief Timer clock in Hz.
- * @note The low level can use assertions in order to catch invalid
- * frequency specifications.
- */
- gptfreq_t frequency;
- /**
- * @brief Timer callback pointer.
- * @note This callback is invoked on GPT counter events.
- * @note This callback can be set to @p NULL but in that case the
- * one-shot mode cannot be used.
- */
- gptcallback_t callback;
- /* End of the mandatory fields.*/
- /**
- * @brief The timer resolution in bits (8/16/24/32)
- * @note The default value of this field is 16 bits
- * @note The 24 and 32 bit modes are only valid for TIMER0
- */
- uint8_t resolution;
-} GPTConfig;
-
-/**
- * @brief Structure representing a GPT driver.
- */
-struct GPTDriver {
- /**
- * @brief Driver state.
- */
- gptstate_t state;
- /**
- * @brief Current configuration data.
- */
- const GPTConfig *config;
-#if defined(GPT_DRIVER_EXT_FIELDS)
- GPT_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the TIMERx registers block.
- */
- NRF_TIMER_Type *tim;
- /**
- * @brief Index of the TIMERx capture/compare register used for setting the
- * interval between compare events.
- */
- uint8_t cc_int;
- /**
- * @brief Index of the TIMERx capture/compare register used for getting the
- * current timer counter value.
- */
- uint8_t cc_get;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/**
- * @brief Changes the interval of GPT peripheral.
- * @details This function changes the interval of a running GPT unit.
- * @pre The GPT unit must be running in continuous mode.
- * @post The GPT unit interval is changed to the new value.
- * @note The function has effect at the next cycle start.
- *
- * @param[in] gptp pointer to a @p GPTDriver object
- * @param[in] interval new cycle time in timer ticks
- *
- * @notapi
- */
-#define gpt_lld_change_interval(gptp, interval) \
- ((gptp)->tim->CC[(gptp)->cc_int] = (uint32_t)((interval) - 1))
-
-/**
- * @brief Returns the interval of GPT peripheral.
- * @pre The GPT unit must be running in continuous mode.
- *
- * @param[in] gptp pointer to a @p GPTDriver object
- * @return The current interval.
- *
- * @notapi
- */
-#define gpt_lld_get_interval(gptp) \
- ((gptcnt_t)((gptp)->tim->CC[(gptp)->cc_int]) + 1)
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if NRF51_GPT_USE_TIMER0 && !defined(__DOXYGEN__)
-extern GPTDriver GPTD1;
-#endif
-
-#if NRF51_GPT_USE_TIMER1 && !defined(__DOXYGEN__)
-extern GPTDriver GPTD2;
-#endif
-
-#if NRF51_GPT_USE_TIMER2 && !defined(__DOXYGEN__)
-extern GPTDriver GPTD3;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void gpt_lld_init(void);
- void gpt_lld_start(GPTDriver *gptp);
- void gpt_lld_stop(GPTDriver *gptp);
- void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period);
- void gpt_lld_stop_timer(GPTDriver *gptp);
- void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval);
- gptcnt_t gpt_lld_get_counter(GPTDriver *gptp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_GPT */
-
-#endif /* HAL_GPT_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c deleted file mode 100644 index 611a004..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c +++ /dev/null @@ -1,446 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/i2c_lld.c
- * @brief NRF51822 I2C subsystem low level driver source.
- *
- * @addtogroup I2C
- * @{
- */
-
-#include "osal.h"
-#include "hal.h"
-#include "nrf51_delay.h"
-
-#if HAL_USE_I2C || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/* These macros are needed to see if the slave is stuck and we as master send dummy clock cycles to end its wait */
-#define I2C_HIGH(p) do { NRF_GPIO->OUTSET = (1UL << (p)); } while(0) /*!< Pulls I2C line high */
-#define I2C_LOW(p) do { NRF_GPIO->OUTCLR = (1UL << (p)); } while(0) /*!< Pulls I2C line low */
-#define I2C_INPUT(p) do { NRF_GPIO->DIRCLR = (1UL << (p)); } while(0) /*!< Configures I2C pin as input */
-#define I2C_OUTPUT(p) do { NRF_GPIO->DIRSET = (1UL << (p)); } while(0) /*!< Configures I2C pin as output */
-
-#define I2C_PIN_CNF \
- ((GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) \
- | (GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) \
- | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) \
- | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) \
- | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos))
-
-#define I2C_PIN_CNF_CLR \
- ((GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) \
- | (GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) \
- | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) \
- | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) \
- | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos))
-
-#if NRF51_I2C_USE_I2C0
-#define I2C_IRQ_NUM SPI0_TWI0_IRQn
-#define I2C_IRQ_PRI NRF51_I2C_I2C0_IRQ_PRIORITY
-#elif NRF51_I2C_USE_I2C1
-#define I2C_IRQ_NUM SPI1_TWI1_IRQn
-#define I2C_IRQ_PRI NRF51_I2C_I2C1_IRQ_PRIORITY
-#endif
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/**
- * @brief I2C0 driver identifier.
- */
-#if NRF51_I2C_USE_I2C0 || defined(__DOXYGEN__)
-I2CDriver I2CD1;
-#endif
-
-/**
- * @brief I2C1 driver identifier.
- */
-#if NRF51_I2C_USE_I2C1 || defined(__DOXYGEN__)
-I2CDriver I2CD2;
-#endif
-
-uint8_t tx_resume_count;
-uint8_t rx_resume_count;
-uint8_t stop_count;
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Function for detecting stuck slaves (SDA = 0 and SCL = 1) and tries to clear the bus.
- *
- * @return
- * @retval false Bus is stuck.
- * @retval true Bus is clear.
- */
-static void i2c_clear_bus(I2CDriver *i2cp)
-{
- const I2CConfig *cfg = i2cp->config;
- int i;
-
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF;
-
- I2C_HIGH(cfg->sda_pad);
- I2C_HIGH(cfg->scl_pad);
-
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR;
-
- nrf_delay_us(4);
-
- for(i = 0; i < 9; i++) {
- if (palReadPad(IOPORT1, cfg->sda_pad)) {
- if(i > 0)
- break;
- else
- return;
- }
-
- I2C_LOW(cfg->scl_pad);
- nrf_delay_us(4);
- I2C_HIGH(cfg->scl_pad);
- nrf_delay_us(4);
- }
-
- I2C_LOW(cfg->sda_pad);
- nrf_delay_us(4);
- I2C_HIGH(cfg->sda_pad);
-}
-
-static inline void i2c_setup_shortcut(I2CDriver *i2cp)
-{
- uint32_t rxbytes = i2cp->rxbytes;
- uint32_t txbytes = i2cp->txbytes;
-
- osalDbgAssert(rxbytes + txbytes, "transfer must be greater than zero");
-
- if (txbytes > 1 || (!txbytes && rxbytes > 1))
- i2cp->i2c->SHORTS = TWI_SHORTS_BB_SUSPEND_Enabled << TWI_SHORTS_BB_SUSPEND_Pos;
- else if (((txbytes == 1) && !rxbytes) || ((rxbytes == 1) && !txbytes))
- i2cp->i2c->SHORTS = TWI_SHORTS_BB_STOP_Enabled << TWI_SHORTS_BB_STOP_Pos;
- else
- i2cp->i2c->SHORTS = 0;
-}
-
-#if defined(__GNUC__)
-__attribute__((noinline))
-#endif
-/**
- * @brief Common IRQ handler.
- * @note Tries hard to clear all the pending interrupt sources, we don't
- * want to go through the whole ISR and have another interrupt soon
- * after.
- *
- * @param[in] i2cp pointer to an I2CDriver
- */
-static void serve_interrupt(I2CDriver *i2cp) {
-
- NRF_TWI_Type *i2c = i2cp->i2c;
-
- if(i2c->EVENTS_TXDSENT) {
-
- i2c->EVENTS_TXDSENT = 0;
-
- if(--i2cp->txbytes) {
-
- i2c->TXD = *i2cp->txptr++;
- i2c_setup_shortcut(i2cp);
- i2c->TASKS_RESUME = 1;
- tx_resume_count++;
- }
- else if (i2cp->rxbytes) {
-
- i2c_setup_shortcut(i2cp);
- i2c->TASKS_STARTRX = 1;
- }
- }
- if(i2c->EVENTS_RXDREADY) {
-
- i2c->EVENTS_RXDREADY = 0;
- *i2cp->rxptr++ = i2c->RXD;
-
- if(--i2cp->rxbytes) {
- i2c_setup_shortcut(i2cp);
- i2c->TASKS_RESUME = 1;
- rx_resume_count++;
- }
- }
- if(i2c->EVENTS_ERROR) {
-
- uint32_t err = i2c->ERRORSRC;
- i2c->EVENTS_ERROR = 0;
-
- if (err & TWI_ERRORSRC_OVERRUN_Msk)
- i2cp->errors |= I2C_OVERRUN;
- if (err & (TWI_ERRORSRC_ANACK_Msk | TWI_ERRORSRC_DNACK_Msk))
- i2cp->errors |= I2C_ACK_FAILURE;
-
- i2c->TASKS_STOP = 1;
- _i2c_wakeup_error_isr(i2cp);
- } else if(i2c->EVENTS_STOPPED) {
-
- stop_count++;
- i2c->EVENTS_STOPPED = 0;
- _i2c_wakeup_isr(i2cp);
- }
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if NRF51_I2C_USE_I2C0 || defined(__DOXYGEN__)
-
-OSAL_IRQ_HANDLER(Vector4C) {
-
- OSAL_IRQ_PROLOGUE();
- serve_interrupt(&I2CD1);
- OSAL_IRQ_EPILOGUE();
-}
-
-#endif
-
-#if NRF51_I2C_USE_I2C1 || defined(__DOXYGEN__)
-
-OSAL_IRQ_HANDLER(Vector50) {
-
- OSAL_IRQ_PROLOGUE();
- serve_interrupt(&I2CD2);
- OSAL_IRQ_EPILOGUE();
-}
-
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level I2C driver initialization.
- *
- * @notapi
- */
-void i2c_lld_init(void) {
-
-#if NRF51_I2C_USE_I2C0
- i2cObjectInit(&I2CD1);
- I2CD1.thread = NULL;
- I2CD1.i2c = NRF_TWI0;
-#endif
-
-#if NRF51_I2C_USE_I2C1
- i2cObjectInit(&I2CD2);
- I2CD2.thread = NULL;
- I2CD2.i2c = NRF_TWI1;
-#endif
-
-}
-
-/**
- * @brief Configures and activates the I2C peripheral.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- *
- * @notapi
- */
-void i2c_lld_start(I2CDriver *i2cp) {
-
- NRF_TWI_Type *i2c = i2cp->i2c;
- const I2CConfig *cfg = i2cp->config;
-
- if (i2cp->state != I2C_STOP)
- return;
-
- i2c_clear_bus(i2cp);
-
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF;
-
- i2c->EVENTS_RXDREADY = 0;
- i2c->EVENTS_TXDSENT = 0;
- i2c->PSELSCL = cfg->scl_pad;
- i2c->PSELSDA = cfg->sda_pad;
-
- switch (cfg->clock) {
- case 100000:
- i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K100 << TWI_FREQUENCY_FREQUENCY_Pos;
- break;
- case 250000:
- i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K250 << TWI_FREQUENCY_FREQUENCY_Pos;
- break;
- case 400000:
- i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K400 << TWI_FREQUENCY_FREQUENCY_Pos;
- break;
- default:
- osalDbgAssert(0, "invalid I2C frequency");
- break;
- };
-
- nvicEnableVector(I2C_IRQ_NUM, I2C_IRQ_PRI);
-
- i2c->INTENSET = TWI_INTENSET_TXDSENT_Msk | TWI_INTENSET_STOPPED_Msk |
- TWI_INTENSET_ERROR_Msk | TWI_INTENSET_RXDREADY_Msk;
-
- i2c->ENABLE = TWI_ENABLE_ENABLE_Enabled << TWI_ENABLE_ENABLE_Pos;
-}
-
-/**
- * @brief Deactivates the I2C peripheral.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- *
- * @notapi
- */
-void i2c_lld_stop(I2CDriver *i2cp) {
-
- NRF_TWI_Type *i2c = i2cp->i2c;
- const I2CConfig *cfg = i2cp->config;
-
- if (i2cp->state != I2C_STOP) {
-
- i2c->ENABLE = TWI_ENABLE_ENABLE_Disabled << TWI_ENABLE_ENABLE_Pos;
-
- i2c->INTENCLR = TWI_INTENSET_TXDSENT_Msk | TWI_INTENSET_STOPPED_Msk |
- TWI_INTENSET_ERROR_Msk | TWI_INTENSET_RXDREADY_Msk;
-
- nvicDisableVector(I2C_IRQ_NUM);
-
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR;
- }
-}
-
-static inline msg_t _i2c_txrx_timeout(I2CDriver *i2cp, i2caddr_t addr,
- const uint8_t *txbuf, size_t txbytes,
- uint8_t *rxbuf, size_t rxbytes,
- systime_t timeout) {
-
- NRF_TWI_Type *i2c = i2cp->i2c;
-
- (void)timeout;
- msg_t msg;
-
- i2cp->errors = I2C_NO_ERROR;
- i2cp->addr = addr;
-
- i2cp->txptr = txbuf;
- i2cp->txbytes = txbytes;
-
- i2cp->rxptr = rxbuf;
- i2cp->rxbytes = rxbytes;
-
- i2c->ADDRESS = addr;
-
- tx_resume_count = 0;
- rx_resume_count = 0;
- stop_count = 0;
-
- if (i2cp->txbytes) {
-
- i2c->TXD = *i2cp->txptr++;
- i2c_setup_shortcut(i2cp);
- i2c->TASKS_STARTTX = 1;
- } else if (i2cp->rxbytes) {
-
- i2c_setup_shortcut(i2cp);
- i2c->TASKS_STARTRX = 1;
- } else {
-
- osalDbgAssert(0, "no bytes to transfer");
- }
-
- msg = osalThreadSuspendTimeoutS(&i2cp->thread, timeout);
-
- if (msg == MSG_TIMEOUT)
- i2c->TASKS_STOP = 1;
-
- return msg;
-}
-
-/**
- * @brief Receives data via the I2C bus as master.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] addr slave device address
- * @param[out] rxbuf pointer to the receive buffer
- * @param[in] rxbytes number of bytes to be received
- * @param[in] timeout the number of ticks before the operation timeouts,
- * the following special values are allowed:
- * - @a TIME_INFINITE no timeout.
- * .
- * @return The operation status.
- * @retval MSG_OK if the function succeeded.
- * @retval MSG_RESET if one or more I2C errors occurred, the errors can
- * be retrieved using @p i2cGetErrors().
- * @retval MSG_TIMEOUT if a timeout occurred before operation end. <b>After a
- * timeout the driver must be stopped and restarted
- * because the bus is in an uncertain state</b>.
- *
- * @notapi
- */
-msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
- uint8_t *rxbuf, size_t rxbytes,
- systime_t timeout) {
-
- return _i2c_txrx_timeout(i2cp, addr, NULL, 0, rxbuf, rxbytes, timeout);
-}
-
-/**
- * @brief Transmits data via the I2C bus as master.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] addr slave device address
- * @param[in] txbuf pointer to the transmit buffer
- * @param[in] txbytes number of bytes to be transmitted
- * @param[out] rxbuf pointer to the receive buffer
- * @param[in] rxbytes number of bytes to be received
- * @param[in] timeout the number of ticks before the operation timeouts,
- * the following special values are allowed:
- * - @a TIME_INFINITE no timeout.
- * .
- * @return The operation status.
- * @retval MSG_OK if the function succeeded.
- * @retval MSG_RESET if one or more I2C errors occurred, the errors can
- * be retrieved using @p i2cGetErrors().
- * @retval MSG_TIMEOUT if a timeout occurred before operation end. <b>After a
- * timeout the driver must be stopped and restarted
- * because the bus is in an uncertain state</b>.
- *
- * @notapi
- */
-msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
- const uint8_t *txbuf, size_t txbytes,
- uint8_t *rxbuf, size_t rxbytes,
- systime_t timeout) {
-
- return _i2c_txrx_timeout(i2cp, addr, txbuf, txbytes, rxbuf, rxbytes, timeout);
-}
-
-#endif /* HAL_USE_I2C */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h deleted file mode 100644 index e2c3d07..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h +++ /dev/null @@ -1,232 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/i2c_lld.h
- * @brief NRF51822 I2C subsystem low level driver header.
- *
- * @addtogroup I2C
- * @{
- */
-
-#ifndef HAL_I2C_LLD_H
-#define HAL_I2C_LLD_H
-
-#if HAL_USE_I2C || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-#define STATE_STOP 0x00
-#define STATE_SEND 0x01
-#define STATE_RECV 0x02
-#define STATE_DUMMY 0x03
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief I2C0 driver enable switch.
- * @details If set to @p TRUE the support for I2C0 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF51_I2C_USE_I2C0) || defined(__DOXYGEN__)
-#define NRF51_I2C_USE_I2C0 FALSE
-#endif
-
-/**
- * @brief I2C1 driver enable switch.
- * @details If set to @p TRUE the support for I2C1 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF51_I2C_USE_I2C1) || defined(__DOXYGEN__)
-#define NRF51_I2C_USE_I2C1 FALSE
-#endif
-
-/**
- * @brief I2C0 interrupt priority level setting.
- */
-#if !defined(NRF51_I2C_I2C0_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_I2C_I2C0_IRQ_PRIORITY 3
-#endif
-
-/**
- * @brief I2C1 interrupt priority level setting.
- */
-#if !defined(NRF51_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_I2C_I2C1_IRQ_PRIORITY 3
-#endif
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if NRF51_I2C_USE_I2C0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_I2C_I2C0_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to I2C0"
-#endif
-
-#if NRF51_I2C_USE_I2C1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_I2C_I2C1_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to I2C1"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/* @brief Type representing I2C address. */
-typedef uint8_t i2caddr_t;
-
-/* @brief Type of I2C Driver condition flags. */
-typedef uint32_t i2cflags_t;
-
-/* @brief Type used to control the ISR state machine. */
-typedef uint8_t intstate_t;
-
-/**
- * @brief Driver configuration structure.
- * @note Implementations may extend this structure to contain more,
- * architecture dependent, fields.
- */
-
-/**
- * @brief Driver configuration structure.
- */
-typedef struct {
-
- /* @brief Clock to be used for the I2C bus. */
- uint32_t clock;
- /* @brief Pad number for SCL */
- uint8_t scl_pad;
- /* @brief Pad number for SDA */
- uint8_t sda_pad;
-
-} I2CConfig;
-
-/**
- * @brief Type of a structure representing an I2C driver.
- */
-typedef struct I2CDriver I2CDriver;
-
-/**
- * @brief Structure representing an I2C driver.
- */
-struct I2CDriver {
- /**
- * @brief Driver state.
- */
- i2cstate_t state;
- /**
- * @brief Current configuration data.
- */
- const I2CConfig *config;
- /**
- * @brief Error flags.
- */
- i2cflags_t errors;
-#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
-#if CH_CFG_USE_MUTEXES || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the bus.
- */
- mutex_t mutex;
-#elif CH_CFG_USE_SEMAPHORES
- semaphore_t semaphore;
-#endif
-#endif /* I2C_USE_MUTUAL_EXCLUSION */
-#if defined(I2C_DRIVER_EXT_FIELDS)
- I2C_DRIVER_EXT_FIELDS
-#endif
- /* @brief Thread waiting for I/O completion. */
- thread_reference_t thread;
- /* @brief Current slave address without R/W bit. */
- i2caddr_t addr;
-
- /* End of the mandatory fields.*/
-
- /* @brief Pointer to the buffer with data to send. */
- const uint8_t *txptr;
- /* @brief Number of bytes of data to send. */
- size_t txbytes;
- /* @brief Pointer to the buffer to put received data. */
- uint8_t *rxptr;
- /* @brief Number of bytes of data to receive. */
- size_t rxbytes;
- /* @brief Tracks current ISR state. */
- intstate_t intstate;
- /* @brief Low-level register access. */
- NRF_TWI_Type *i2c;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/**
- * @brief Get errors from I2C driver.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- *
- * @notapi
- */
-#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if !defined(__DOXYGEN__)
-
-#if NRF51_I2C_USE_I2C0
-extern I2CDriver I2CD1;
-#endif
-
-#if NRF51_I2C_USE_I2C1
-extern I2CDriver I2CD2;
-#endif
-
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void i2c_lld_init(void);
- void i2c_lld_start(I2CDriver *i2cp);
- void i2c_lld_stop(I2CDriver *i2cp);
- msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
- const uint8_t *txbuf, size_t txbytes,
- uint8_t *rxbuf, size_t rxbytes,
- systime_t timeout);
- msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
- uint8_t *rxbuf, size_t rxbytes,
- systime_t timeout);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_I2C */
-
-#endif /* HAL_I2C_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c deleted file mode 100644 index af5e377..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/NRF51822/hal_lld.c - * @brief NRF51822 HAL Driver subsystem low level driver source. - * - * @addtogroup HAL - * @{ - */ - -#include "hal.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level HAL driver initialization. - * - * @notapi - */ -void hal_lld_init(void) -{ - /* High frequency clock initialisation - * (If NRF51_XTAL_VALUE is not defined assume its an RC oscillator) - */ - NRF_CLOCK->TASKS_HFCLKSTOP = 1; -#if defined(NRF51_XTAL_VALUE) -#if NRF51_XTAL_VALUE == 16000000 - NRF_CLOCK->XTALFREQ = 0xFF; -#elif NRF51_XTAL_VALUE == 32000000 - NRF_CLOCK->XTALFREQ = 0x00; -#endif -#endif - - - /* Low frequency clock initialisation - * Clock is only started if st driver requires it - */ - NRF_CLOCK->TASKS_LFCLKSTOP = 1; - NRF_CLOCK->LFCLKSRC = NRF51_LFCLK_SOURCE; - -#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) && \ - (NRF51_SYSTEM_TICKS == NRF51_SYSTEM_TICKS_AS_RTC) - NRF_CLOCK->TASKS_LFCLKSTART = 1; -#endif -} - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h deleted file mode 100644 index e404020..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_lld.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - Copyright (C) 2015 Fabio Utzig - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/NRF51822/hal_lld.h - * @brief NRF51822 HAL subsystem low level driver header. - * - * @addtogroup HAL - * @{ - */ - -#ifndef HAL_LLD_H -#define HAL_LLD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @name Platform identification - * @{ - */ -#define PLATFORM_NAME "Nordic Semiconductor nRF51822" - -/** - * @} - */ - -/** - * @brief Frequency valuefor the Low Frequency Clock - */ -#define NRF51_LFCLK_FREQUENCY 32768 - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief Select source of Low Frequency Clock (LFCLK) - * @details Possible values for source are: - * 0 : RC oscillator - * 1 : External cristal - * 2 : Synthetized clock from High Frequency Clock (HFCLK) - * When cristal is not available it's preferable to use the - * internal RC oscillator that synthezing the clock. - */ -#if !defined(NRF51_LFCLK_SOURCE) || defined(__DOXYGEN__) -#define NRF51_LFCLK_SOURCE 0 -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if (NRF51_LFCLK_SOURCE < 0) || (NRF51_LFCLK_SOURCE > 2) -#error "Possible value for NRF51_LFCLK_SOURCE are 0=RC, 1=XTAL, 2=Synth" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#include "nvic.h" - -#define NRF51_LFCLK_FREQUENCY 32768 -#define NRF51_HFCLK_FREQUENCY 16000000 - -#ifdef __cplusplus -extern "C" { -#endif - void hal_lld_init(void); - void nrf51_clock_init(void); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_LLD_H */ - -/** - * @} - */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c deleted file mode 100644 index 69fc9fe..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c +++ /dev/null @@ -1,158 +0,0 @@ -/*
- Copyright (C) 2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file pal_lld.c
- * @brief NRF51822 PAL subsystem low level driver source.
- *
- * @addtogroup PAL
- * @{
- */
-
-#include "osal.h"
-#include "hal.h"
-
-#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode)
-{
- (void)port;
- osalDbgAssert(pad <= 31, "pal_lld_setpadmode() - invalid pad");
-
- switch (mode) {
- case PAL_MODE_RESET:
- case PAL_MODE_UNCONNECTED:
- NRF_GPIO->PIN_CNF[pad] =
- (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
- (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
- (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
- (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos) |
- (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
- break;
- case PAL_MODE_INPUT:
- case PAL_MODE_INPUT_ANALOG:
- NRF_GPIO->PIN_CNF[pad] =
- (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
- (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
- (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
- (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) |
- (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
- break;
- case PAL_MODE_INPUT_PULLUP:
- NRF_GPIO->PIN_CNF[pad] =
- (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
- (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
- (GPIO_PIN_CNF_PULL_Pullup << GPIO_PIN_CNF_PULL_Pos) |
- (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) |
- (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
- break;
- case PAL_MODE_INPUT_PULLDOWN:
- NRF_GPIO->PIN_CNF[pad] =
- (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
- (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
- (GPIO_PIN_CNF_PULL_Pulldown << GPIO_PIN_CNF_PULL_Pos) |
- (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) |
- (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
- break;
- case PAL_MODE_OUTPUT_PUSHPULL:
- NRF_GPIO->PIN_CNF[pad] =
- (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
- (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
- (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
- (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos) |
- (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
- break;
- case PAL_MODE_OUTPUT_OPENDRAIN:
- NRF_GPIO->PIN_CNF[pad] =
- (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
- (GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) |
- (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
- (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos) |
- (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
- break;
- default:
- osalDbgAssert(FALSE, "invalid pal mode");
- break;
- }
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief NRF51 I/O ports configuration.
- *
- * @param[in] config the NRF51 ports configuration
- *
- * @notapi
- */
-void _pal_lld_init(const PALConfig *config)
-{
- uint8_t i;
-
- for (i = 0; i < TOTAL_GPIO_PADS; i++) {
- pal_lld_setpadmode(IOPORT1, i, config->pads[i]);
- }
-}
-
-/**
- * @brief Pads mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- *
- * @param[in] port the port identifier
- * @param[in] mask the group mask
- * @param[in] mode the mode
- *
- * @notapi
- */
-void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- iomode_t mode)
-{
- uint8_t i;
-
- for (i = 0; i < TOTAL_GPIO_PADS; i++, mask >>= 1) {
- if (mask & 1) {
- pal_lld_setpadmode(port, i, mode);
- }
- }
-}
-
-#endif /* HAL_USE_PAL == TRUE */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h deleted file mode 100644 index 5032916..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h +++ /dev/null @@ -1,347 +0,0 @@ -/*
- Copyright (C) 2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file pal_lld.h
- * @brief NRF51822 PAL subsystem low level driver header.
- *
- * @addtogroup PAL
- * @{
- */
-
-#ifndef HAL_PAL_LLD_H
-#define HAL_PAL_LLD_H
-
-#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Unsupported modes and specific modes */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* I/O Ports Types and constants. */
-/*===========================================================================*/
-
-#define TOTAL_GPIO_PADS 32
-
-/**
- * @name Port related definitions
- * @{
- */
-/**
- * @brief Width, in bits, of an I/O port.
- */
-#define PAL_IOPORTS_WIDTH 32U
-
-/**
- * @brief Whole port mask.
- * @brief This macro specifies all the valid bits into a port.
- */
-#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFFU)
-/** @} */
-
-/**
- * @name Line handling macros
- * @{
- */
-/**
- * @brief Forms a line identifier.
- * @details A port/pad pair are encoded into an @p ioline_t type. The encoding
- * of this type is platform-dependent.
- */
-#define PAL_LINE(port, pad) \
- ((ioline_t)((uint32_t)(pad)))
-
-/**
- * @brief Decodes a port identifier from a line identifier.
- */
-#define PAL_PORT(line) \
- ((ioportid_t)(IOPORT1))
-
-/**
- * @brief Decodes a pad identifier from a line identifier.
- */
-#define PAL_PAD(line) \
- ((uint32_t)(line))
-
-/**
- * @brief Value identifying an invalid line.
- */
-#define PAL_NOLINE ((ioline_t)-1)
-/** @} */
-
-/**
- * @brief Generic I/O ports static initializer.
- * @details An instance of this structure must be passed to @p palInit() at
- * system startup time in order to initialized the digital I/O
- * subsystem. This represents only the initial setup, specific pads
- * or whole ports can be reprogrammed at later time.
- * @note Implementations may extend this structure to contain more,
- * architecture dependent, fields.
- */
-typedef struct {
- uint32_t pads[TOTAL_GPIO_PADS];
-} PALConfig;
-
-/**
- * @brief Digital I/O port sized unsigned type.
- */
-typedef uint32_t ioportmask_t;
-
-/**
- * @brief Digital I/O modes.
- */
-typedef uint8_t iomode_t;
-
-/**
- * @brief Type of an I/O line.
- */
-typedef uint32_t ioline_t;
-
-/**
- * @brief Port Identifier.
- * @details This type can be a scalar or some kind of pointer, do not make
- * any assumption about it, use the provided macros when populating
- * variables of this type.
- */
-typedef NRF_GPIO_Type *ioportid_t;
-
-/*===========================================================================*/
-/* I/O Ports Identifiers. */
-/*===========================================================================*/
-
-/**
- * @brief First I/O port identifier.
- * @details Low level drivers can define multiple ports, it is suggested to
- * use this naming convention.
- */
-#define IOPORT1 NRF_GPIO
-
-/*===========================================================================*/
-/* Implementation, some of the following macros could be implemented as */
-/* functions, if so please put them in pal_lld.c. */
-/*===========================================================================*/
-
-/**
- * @brief Low level PAL subsystem initialization.
- *
- * @param[in] config architecture-dependent ports configuration
- *
- * @notapi
- */
-#define pal_lld_init(config) _pal_lld_init(config)
-
-/**
- * @brief Reads the physical I/O port states.
- *
- * @param[in] port port identifier
- * @return The port bits.
- *
- * @notapi
- */
-#define pal_lld_readport(port) (NRF_GPIO->IN)
-
-/**
- * @brief Reads the output latch.
- * @details The purpose of this function is to read back the latched output
- * value.
- *
- * @param[in] port port identifier
- * @return The latched logical states.
- *
- * @notapi
- */
-#define pal_lld_readlatch(port) (NRF_GPIO->OUT)
-
-/**
- * @brief Writes a bits mask on a I/O port.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be written on the specified port
- *
- * @notapi
- */
-#define pal_lld_writeport(port, bits) (NRF_GPIO->OUT = (bits))
-
-/**
- * @brief Sets a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be ORed on the specified port
- *
- * @notapi
- */
-#define pal_lld_setport(port, bits) (NRF_GPIO->OUTSET = (bits))
-
-
-/**
- * @brief Clears a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be cleared on the specified port
- *
- * @notapi
- */
-#define pal_lld_clearport(port, bits) (NRF_GPIO->OUTCLR = (bits))
-
-/**
- * @brief Pads group mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @param[in] mode group mode
- *
- * @notapi
- */
-#define pal_lld_setgroupmode(port, mask, offset, mode) \
- _pal_lld_setgroupmode(port, mask << offset, mode)
-
-/**
- * @brief Reads a logical state from an I/O pad.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @return The logical state.
- * @retval PAL_LOW low logical state.
- * @retval PAL_HIGH high logical state.
- *
- * @notapi
- */
-#define pal_lld_readpad(port, pad) \
- ((NRF_GPIO->IN & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW)
-
-/**
- * @brief Writes a logical state on an output pad.
- * @note This function is not meant to be invoked directly by the
- * application code.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @param[in] bit logical value, the value must be @p PAL_LOW or
- * @p PAL_HIGH
- *
- * @notapi
- */
-#define pal_lld_writepad(port, pad, bit) \
- do { \
- (void)port; \
- if (bit == PAL_HIGH) \
- NRF_GPIO->OUTSET = ((uint32_t) 1 << pad); \
- else \
- NRF_GPIO->OUTCLR = ((uint32_t) 1 << pad); \
- } while (false)
-
-/**
- * @brief Sets a pad logical state to @p PAL_HIGH.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_setpad(port, pad) (NRF_GPIO->OUTSET = (uint32_t) 1 << (pad))
-
-/**
- * @brief Clears a pad logical state to @p PAL_LOW.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_clearpad(port, pad) (NRF_GPIO->OUTCLR = (uint32_t) 1 << (pad))
-
-/**
- * @brief Toggles a pad logical state.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_togglepad(port, pad) \
- do { \
- uint8_t bit = (NRF_GPIO->IN >> (pad)) & 1; \
- if (bit) \
- NRF_GPIO->OUTCLR = 1 << (pad); \
- else \
- NRF_GPIO->OUTSET = 1 << (pad); \
- } while (0)
-
-/**
- * @brief Pad mode setup.
- * @details This function programs a pad with the specified mode.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @param[in] mode pad mode
- *
- * @notapi
- */
-#define pal_lld_setpadmode(port, pad, mode) _pal_lld_setpadmode(port, pad, mode)
-
-#if !defined(__DOXYGEN__)
-extern const PALConfig pal_default_config;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void _pal_lld_init(const PALConfig *config);
- void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- iomode_t mode);
- void _pal_lld_setpadmode(ioportid_t port,
- uint8_t pad,
- iomode_t mode);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_PAL == TRUE */
-
-#endif /* HAL_PAL_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c deleted file mode 100644 index 456dcff..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c +++ /dev/null @@ -1,425 +0,0 @@ -/*
- ChibiOS/HAL - Copyright (C) 2016 Stéphane D'Alu
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file hal_pwm_lld.c
- * @brief NRF51 PWM subsystem low level driver source.
- *
- * @addtogroup PWM
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_PWM || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/**
- * @brief PWMD1 driver identifier.
- * @note The driver PWMD1 allocates the timer TIMER0 when enabled.
- */
-#if NRF51_PWM_USE_TIMER0 || defined(__DOXYGEN__)
-PWMDriver PWMD1;
-#endif
-
-/**
- * @brief PWMD2 driver identifier.
- * @note The driver PWMD2 allocates the timer TIMER1 when enabled.
- */
-#if NRF51_PWM_USE_TIMER1 || defined(__DOXYGEN__)
-PWMDriver PWMD2;
-#endif
-
-/**
- * @brief PWMD3 driver identifier.
- * @note The driver PWMD3 allocates the timer TIMER2 when enabled.
- */
-#if NRF51_PWM_USE_TIMER2 || defined(__DOXYGEN__)
-PWMDriver PWMD3;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-static void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
- // Deal with PWM channels
- uint8_t n;
- for (n = 0 ; n < pwmp->channels ; n++) {
- if (pwmp->timer->EVENTS_COMPARE[n]) {
- pwmp->timer->EVENTS_COMPARE[n] = 0;
-
- if (pwmp->config->channels[n].callback != NULL) {
- pwmp->config->channels[n].callback(pwmp);
- }
- }
- }
-
- // Deal with PWM period
- if (pwmp->timer->EVENTS_COMPARE[pwmp->channels]) {
- pwmp->timer->EVENTS_COMPARE[pwmp->channels] = 0;
-
- if (pwmp->config->callback != NULL) {
- pwmp->config->callback(pwmp);
- }
- }
-
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if NRF51_PWM_USE_TIMER0
-/**
- * @brief TIMER0 interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector60) {
- OSAL_IRQ_PROLOGUE();
- pwm_lld_serve_interrupt(&PWMD1);
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* NRF51_PWM_USE_TIMER0 */
-
-#if NRF51_PWM_USE_TIMER1
-/**
- * @brief TIMER1 interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector64) {
- OSAL_IRQ_PROLOGUE();
- pwm_lld_serve_interrupt(&PWMD2);
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* NRF51_PWM_USE_TIMER1 */
-
-#if NRF51_PWM_USE_TIMER2
-/**
- * @brief TIMER2 interrupt handler.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector68) {
- OSAL_IRQ_PROLOGUE();
- pwm_lld_serve_interrupt(&PWMD3);
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* NRF51_PWM_USE_TIMER2 */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level PWM driver initialization.
- *
- * @notapi
- */
-void pwm_lld_init(void) {
-
-#if NRF51_PWM_USE_TIMER0
- pwmObjectInit(&PWMD1);
- PWMD1.channels = PWM_CHANNELS;
- PWMD1.timer = NRF_TIMER0;
-#endif
-
-#if NRF51_PWM_USE_TIMER1
- pwmObjectInit(&PWMD2);
- PWMD2.channels = PWM_CHANNELS;
- PWMD2.timer = NRF_TIMER1;
-#endif
-
-#if NRF51_PWM_USE_TIMER2
- pwmObjectInit(&PWMD3);
- PWMD3.channels = PWM_CHANNELS;
- PWMD3.timer = NRF_TIMER2;
-#endif
-}
-
-/**
- * @brief Configures and activates the PWM peripheral.
- * @note Starting a driver that is already in the @p PWM_READY state
- * disables all the active channels.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- *
- * @notapi
- */
-void pwm_lld_start(PWMDriver *pwmp) {
- // Prescaler value calculation: ftimer = 16MHz / 2^PRESCALER
- uint16_t psc_ratio = NRF51_HFCLK_FREQUENCY / pwmp->config->frequency;
- // Prescaler ratio must be between 1 and 512, and a power of two.
- osalDbgAssert(psc_ratio <= 512 && !(psc_ratio & (psc_ratio - 1)),
- "invalid frequency");
- // Prescaler value as a power of 2, must be 0..9
- uint32_t psc_value;
- for (psc_value = 0; psc_value < 10; psc_value++)
- if (psc_ratio == (unsigned)(1 << psc_value))
- break;
-
-
- // Configure as 16bits timer (only TIMER0 support 32bits)
- pwmp->timer->BITMODE = TIMER_BITMODE_BITMODE_16Bit;
- pwmp->timer->MODE = TIMER_MODE_MODE_Timer;
-
- // With clear shortcuts for period
- pwmp->timer->SHORTS =
- 0x1UL << (TIMER_SHORTS_COMPARE0_CLEAR_Pos + pwmp->channels);
-
- // Disable and reset interrupts for compare events
- pwmp->timer->INTENCLR = (TIMER_INTENCLR_COMPARE0_Msk |
- TIMER_INTENCLR_COMPARE1_Msk |
- TIMER_INTENCLR_COMPARE2_Msk |
- TIMER_INTENCLR_COMPARE3_Msk );
- pwmp->timer->EVENTS_COMPARE[0] = 0;
- pwmp->timer->EVENTS_COMPARE[1] = 0;
- pwmp->timer->EVENTS_COMPARE[2] = 0;
- pwmp->timer->EVENTS_COMPARE[3] = 0;
-
- // Set prescaler
- pwmp->timer->PRESCALER = psc_value;
-
- // Set period
- pwmp->timer->CC[pwmp->channels] = pwmp->period;
-
- // Clear everything
- pwmp->timer->TASKS_CLEAR = 1;
-
-
- // Enable interrupt
-#if NRF51_PWM_USE_TIMER0
- if (&PWMD1 == pwmp) {
- nvicEnableVector(TIMER0_IRQn, NRF51_PWM_TIMER0_PRIORITY);
- }
-#endif
-
-#if NRF51_PWM_USE_TIMER1
- if (&PWMD2 == pwmp) {
- nvicEnableVector(TIMER1_IRQn, NRF51_PWM_TIMER1_PRIORITY);
- }
-#endif
-
-#if NRF51_PWM_USE_TIMER2
- if (&PWMD3 == pwmp) {
- nvicEnableVector(TIMER2_IRQn, NRF51_PWM_TIMER2_PRIORITY);
- }
-#endif
-
- // Start timer
- pwmp->timer->TASKS_START = 1;
-}
-
-/**
- * @brief Deactivates the PWM peripheral.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- *
- * @notapi
- */
-void pwm_lld_stop(PWMDriver *pwmp) {
- pwmp->timer->TASKS_STOP = 1;
-
-#if NRF51_PWM_USE_TIMER0
- if (&PWMD1 == pwmp) {
- nvicDisableVector(TIMER0_IRQn);
- }
-#endif
-
-#if NRF51_PWM_USE_TIMER1
- if (&PWMD2 == pwmp) {
- nvicDisableVector(TIMER1_IRQn);
- }
-#endif
-
-#if NRF51_PWM_USE_TIMER2
- if (&PWMD3 == pwmp) {
- nvicDisableVector(TIMER2_IRQn);
- }
-#endif
-}
-
-/**
- * @brief Enables a PWM channel.
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @post The channel is active using the specified configuration.
- * @note The function has effect at the next cycle start.
- * @note Channel notification is not enabled.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- * @param[in] channel PWM channel identifier (0...channels-1)
- * @param[in] width PWM pulse width as clock pulses number
- *
- * @notapi
- */
-void pwm_lld_enable_channel(PWMDriver *pwmp,
- pwmchannel_t channel,
- pwmcnt_t width) {
-#if NRF51_PWM_USE_GPIOTE_PPI
- const PWMChannelConfig *cfg_channel = &pwmp->config->channels[channel];
-
- uint32_t outinit;
- switch(cfg_channel->mode & PWM_OUTPUT_MASK) {
- case PWM_OUTPUT_ACTIVE_LOW:
- outinit = GPIOTE_CONFIG_OUTINIT_Low;
- break;
- case PWM_OUTPUT_ACTIVE_HIGH:
- outinit = GPIOTE_CONFIG_OUTINIT_High;
- break;
- case PWM_OUTPUT_DISABLED:
- default:
- goto no_output_config;
- }
-
- const uint32_t gpio_pin = PAL_PAD(cfg_channel->ioline);
- const uint8_t gpiote_channel = cfg_channel->gpiote_channel;
- const uint8_t *ppi_channel = cfg_channel->ppi_channel;
- const uint32_t polarity = GPIOTE_CONFIG_POLARITY_Toggle;
-
- // Create GPIO Task
- NRF_GPIOTE->CONFIG[gpiote_channel] = GPIOTE_CONFIG_MODE_Task |
- ((gpio_pin << GPIOTE_CONFIG_PSEL_Pos ) & GPIOTE_CONFIG_PSEL_Msk) |
- ((polarity << GPIOTE_CONFIG_POLARITY_Pos) & GPIOTE_CONFIG_POLARITY_Msk) |
- ((outinit << GPIOTE_CONFIG_OUTINIT_Pos ) & GPIOTE_CONFIG_OUTINIT_Msk);
-
- // Program tasks (one for duty cycle, one for periode)
- NRF_PPI->CH[ppi_channel[0]].EEP =
- (uint32_t)&pwmp->timer->EVENTS_COMPARE[channel];
- NRF_PPI->CH[ppi_channel[0]].TEP =
- (uint32_t)&NRF_GPIOTE->TASKS_OUT[gpiote_channel];
- NRF_PPI->CH[ppi_channel[1]].EEP =
- (uint32_t)&pwmp->timer->EVENTS_COMPARE[pwmp->channels];
- NRF_PPI->CH[ppi_channel[1]].TEP =
- (uint32_t)&NRF_GPIOTE->TASKS_OUT[gpiote_channel];
- NRF_PPI->CHENSET = ((1 << ppi_channel[0]) | (1 << ppi_channel[1]));
-
- no_output_config:
-#endif
-
- pwmp->timer->CC[channel] = width;
-}
-
-/**
- * @brief Disables a PWM channel and its notification.
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @post The channel is disabled and its output line returned to the
- * idle state.
- * @note The function has effect at the next cycle start.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- * @param[in] channel PWM channel identifier (0...channels-1)
- *
- * @notapi
- */
-void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
- pwmp->timer->CC[channel] = 0;
-#if NRF51_PWM_USE_GPIOTE_PPI
- const PWMChannelConfig *cfg_channel = &pwmp->config->channels[channel];
- switch(cfg_channel->mode & PWM_OUTPUT_MASK) {
- case PWM_OUTPUT_ACTIVE_LOW:
- case PWM_OUTPUT_ACTIVE_HIGH: {
- const uint8_t gpiote_channel = cfg_channel->gpiote_channel;
- const uint8_t *ppi_channel = cfg_channel->ppi_channel;
- NRF_PPI->CHENCLR = ((1 << ppi_channel[0]) | (1 << ppi_channel[1]));
- NRF_GPIOTE->CONFIG[gpiote_channel] = GPIOTE_CONFIG_MODE_Disabled;
- break;
- }
- case PWM_OUTPUT_DISABLED:
- default:
- break;
- }
-#endif
-}
-
-/**
- * @brief Enables the periodic activation edge notification.
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @note If the notification is already enabled then the call has no effect.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- *
- * @notapi
- */
-void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
- pwmp->timer->INTENSET =
- 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + pwmp->channels);
-}
-
-/**
- * @brief Disables the periodic activation edge notification.
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @note If the notification is already disabled then the call has no effect.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- *
- * @notapi
- */
-void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
- pwmp->timer->INTENCLR =
- 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + pwmp->channels);
-}
-
-/**
- * @brief Enables a channel de-activation edge notification.
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @pre The channel must have been activated using @p pwmEnableChannel().
- * @note If the notification is already enabled then the call has no effect.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- * @param[in] channel PWM channel identifier (0...channels-1)
- *
- * @notapi
- */
-void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
- pwmchannel_t channel) {
- pwmp->timer->INTENSET =
- 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + channel);
-}
-
-/**
- * @brief Disables a channel de-activation edge notification.
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @pre The channel must have been activated using @p pwmEnableChannel().
- * @note If the notification is already disabled then the call has no effect.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- * @param[in] channel PWM channel identifier (0...channels-1)
- *
- * @notapi
- */
-void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
- pwmchannel_t channel) {
- pwmp->timer->INTENCLR =
- 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + channel);
-}
-
-#endif /* HAL_USE_PWM */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h deleted file mode 100644 index e2982d8..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h +++ /dev/null @@ -1,333 +0,0 @@ -/*
- ChibiOS/HAL - Copyright (C) 2016 Stéphane D'Alu
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file hal_pwm_lld.h
- * @brief NRF51 PWM subsystem low level driver header.
- *
- * @addtogroup PWM
- * @{
- */
-
-#ifndef HAL_PWM_LLD_H_
-#define HAL_PWM_LLD_H_
-
-#if HAL_USE_PWM || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/**
- * @brief Number of PWM channels per PWM driver.
- */
-#define PWM_CHANNELS 3
-
-
-#define PWM_FREQUENCY_16MHZ 16000000 /** @brief 16MHz */
-#define PWM_FREQUENCY_8MHZ 8000000 /** @brief 8MHz */
-#define PWM_FREQUENCY_4MHZ 4000000 /** @brief 4MHz */
-#define PWM_FREQUENCY_2MHZ 2000000 /** @brief 2MHz */
-#define PWM_FREQUENCY_1MHZ 1000000 /** @brief 1MHz */
-#define PWM_FREQUENCY_500KHZ 500000 /** @brief 500kHz */
-#define PWM_FREQUENCY_250KHZ 250000 /** @brief 250kHz */
-#define PWM_FREQUENCY_125KHZ 125000 /** @brief 125kHz */
-#define PWM_FREQUENCY_62500HZ 62500 /** @brief 62500Hz */
-#define PWM_FREQUENCY_31250HZ 31250 /** @brief 31250Hz */
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-
-/**
- * @brief TIMER0 as driver implementation
- */
-#if !defined(NRF51_PWM_USE_TIMER0)
-#define NRF51_PWM_USE_TIMER0 FALSE
-#endif
-
-/**
- * @brief TIMER1 as driver implementation
- */
-#if !defined(NRF51_PWM_USE_TIMER1)
-#define NRF51_PWM_USE_TIMER1 FALSE
-#endif
-
-/**
- * @brief TIMER2 as driver implementation
- */
-#if !defined(NRF51_PWM_USE_TIMER2)
-#define NRF51_PWM_USE_TIMER2 FALSE
-#endif
-
-/**
- * @brief TIMER0 interrupt priority level setting.
- */
-#if !defined(NRF51_PWM_TIMER0_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_PWM_TIMER0_PRIORITY 3
-#endif
-
-/**
- * @brief TIMER1 interrupt priority level setting.
- */
-#if !defined(NRF51_PWM_TIMER1_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_PWM_TIMER1_PRIORITY 3
-#endif
-
-/**
- * @brief TIMER2 interrupt priority level setting.
- */
-#if !defined(NRF51_PWM_TIMER2_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_PWM_TIMER2_PRIORITY 3
-#endif
-
-/**
- * @brief Allow driver to use GPIOTE/PPI to control PAL line
- */
-#if !defined(NRF51_PWM_USE_GPIOTE_PPI)
-#define NRF51_PWM_USE_GPIOTE_PPI FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Configuration checks. */
-/*===========================================================================*/
-
-#if !NRF51_PWM_USE_TIMER0 && !NRF51_PWM_USE_TIMER1 && !NRF51_PWM_USE_TIMER2
-#error "PWM driver activated but no TIMER peripheral assigned"
-#endif
-
-#if (NRF51_ST_USE_TIMER0 == TRUE) && (NRF51_PWM_USE_TIMER0 == TRUE)
-#error "TIMER0 used for ST and PWM"
-#endif
-
-#if NRF51_PWM_USE_TIMER0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER0_PRIORITY)
-#error "Invalid IRQ priority assigned to TIMER0"
-#endif
-
-#if NRF51_PWM_USE_TIMER1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER1_PRIORITY)
-#error "Invalid IRQ priority assigned to TIMER1"
-#endif
-
-#if NRF51_PWM_USE_TIMER2 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER2_PRIORITY)
-#error "Invalid IRQ priority assigned to TIMER2"
-#endif
-
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Type of a PWM mode.
- */
-typedef uint32_t pwmmode_t;
-
-/**
- * @brief Type of a PWM channel.
- */
-typedef uint8_t pwmchannel_t;
-
-/**
- * @brief Type of a channels mask.
- */
-typedef uint32_t pwmchnmsk_t;
-
-/**
- * @brief Type of a PWM counter.
- */
-typedef uint16_t pwmcnt_t;
-
-/**
- * @brief Type of a PWM driver channel configuration structure.
- */
-typedef struct {
- /**
- * @brief Channel active logic level.
- */
- pwmmode_t mode;
-
- /**
- * @brief Channel callback pointer.
- * @note This callback is invoked on the channel compare event. If set to
- * @p NULL then the callback is disabled.
- */
- pwmcallback_t callback;
- /* End of the mandatory fields.*/
-
- /**
- * @brief PAL line to toggle.
- * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW.
- * @note When NRF51_PWM_USE_GPIOTE_PPI is used and channel enabled,
- * it wont be possible to access this PAL line using the PAL
- * driver.
- */
- ioline_t ioline;
-
-#if NRF51_PWM_USE_GPIOTE_PPI || defined(__DOXYGEN__)
- /**
- * @brief Unique GPIOTE channel to use. (1 channel)
- * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW.
- * @note Only 4 GPIOTE channels are available on nRF51.
- */
- uint8_t gpiote_channel;
-
- /**
- * @brief Unique PPI channels to use. (2 channels)
- * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW.
- * @note Only 16 PPI channels are available on nRF51
- * (When Softdevice is enabled, only channels 0-7 are available)
- */
- uint8_t ppi_channel[2];
-#endif
-} PWMChannelConfig;
-
-/**
- * @brief Type of a PWM driver configuration structure.
- */
-typedef struct {
- /**
- * @brief Timer clock in Hz.
- * @note The low level can use assertions in order to catch invalid
- * frequency specifications.
- */
- uint32_t frequency;
- /**
- * @brief PWM period in ticks.
- * @note The low level can use assertions in order to catch invalid
- * period specifications.
- */
- pwmcnt_t period;
- /**
- * @brief Periodic callback pointer.
- * @note This callback is invoked on PWM counter reset. If set to
- * @p NULL then the callback is disabled.
- */
- pwmcallback_t callback;
- /**
- * @brief Channels configurations.
- */
- PWMChannelConfig channels[PWM_CHANNELS];
- /* End of the mandatory fields.*/
-} PWMConfig;
-
-/**
- * @brief Structure representing a PWM driver.
- */
-struct PWMDriver {
- /**
- * @brief Driver state.
- */
- pwmstate_t state;
- /**
- * @brief Current driver configuration data.
- */
- const PWMConfig *config;
- /**
- * @brief Current PWM period in ticks.
- */
- pwmcnt_t period;
- /**
- * @brief Mask of the enabled channels.
- */
- pwmchnmsk_t enabled;
- /**
- * @brief Number of channels in this instance.
- */
- pwmchannel_t channels;
-#if defined(PWM_DRIVER_EXT_FIELDS)
- PWM_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the TIMER registers block.
- */
- NRF_TIMER_Type *timer;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/**
- * @brief Changes the period the PWM peripheral.
- * @details This function changes the period of a PWM unit that has already
- * been activated using @p pwmStart().
- * @pre The PWM unit must have been activated using @p pwmStart().
- * @post The PWM unit period is changed to the new value.
- * @note The function has effect at the next cycle start.
- * @note If a period is specified that is shorter than the pulse width
- * programmed in one of the channels then the behavior is not
- * guaranteed.
- *
- * @param[in] pwmp pointer to a @p PWMDriver object
- * @param[in] period new cycle time in ticks
- *
- * @notapi
- */
-#define pwm_lld_change_period(pwmp, period) \
- do { \
- (pwmp)->timer->CC[(pwmp)->channels] = ((period) - 1); \
- } while(0)
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if NRF51_PWM_USE_TIMER0 || defined(__DOXYGEN__)
-extern PWMDriver PWMD1;
-#endif
-#if NRF51_PWM_USE_TIMER1 || defined(__DOXYGEN__)
-extern PWMDriver PWMD2;
-#endif
-#if NRF51_PWM_USE_TIMER2 || defined(__DOXYGEN__)
-extern PWMDriver PWMD3;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void pwm_lld_init(void);
- void pwm_lld_start(PWMDriver *pwmp);
- void pwm_lld_stop(PWMDriver *pwmp);
- void pwm_lld_enable_channel(PWMDriver *pwmp,
- pwmchannel_t channel,
- pwmcnt_t width);
- void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel);
- void pwm_lld_enable_periodic_notification(PWMDriver *pwmp);
- void pwm_lld_disable_periodic_notification(PWMDriver *pwmp);
- void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
- pwmchannel_t channel);
- void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
- pwmchannel_t channel);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_PWM */
-
-#endif /* HAL_PWM_LLD_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c deleted file mode 100644 index 5e501ed..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - RNG for ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/RNGv1/rng_lld.c - * @brief NRF51 RNG subsystem low level driver source. - * - * @addtogroup RNG - * @{ - */ - -#include "hal.h" - -#if (HAL_USE_RNG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * @brief RNG default configuration. - */ -static const RNGConfig default_config = { - .digital_error_correction = 1, -}; - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** @brief RNG1 driver identifier.*/ -#if NRF51_RNG_USE_RNG1 || defined(__DOXYGEN__) -RNGDriver RNGD1; -#endif - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level RNG driver initialization. - * - * @notapi - */ -void rng_lld_init(void) { - rngObjectInit(&RNGD1); - RNGD1.rng = NRF_RNG; -} - -/** - * @brief Configures and activates the RNG peripheral. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @notapi - */ -void rng_lld_start(RNGDriver *rngp) { - if (rngp->config == NULL) - rngp->config = &default_config; - - rngp->rng->POWER = 1; - - if (rngp->config->digital_error_correction) - rngp->rng->CONFIG |= RNG_CONFIG_DERCEN_Msk; - else - rngp->rng->CONFIG &= ~RNG_CONFIG_DERCEN_Msk; - - rngp->rng->EVENTS_VALRDY = 0; - rngp->rng->INTENSET = RNG_INTENSET_VALRDY_Msk; - rngp->rng->TASKS_START = 1; -} - - -/** - * @brief Deactivates the RNG peripheral. - * - * @param[in] rngp pointer to the @p RNGDriver object - * - * @notapi - */ -void rng_lld_stop(RNGDriver *rngp) { - rngp->rng->TASKS_STOP = 1; - rngp->rng->POWER = 0; -} - - -/** - * @brief Write random bytes; - * - * @param[in] rngp pointer to the @p RNGDriver object - * @param[in] n size of buf in bytes - * @param[in] buf @p buffer location - * - * @notapi - */ -msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, - systime_t timeout) { - size_t i; - - for (i = 0 ; i < n ; i++) { - /* Wait for byte ready - * It take about 677µs to generate a new byte, not sure if - * forcing a context switch will be a benefit - */ - while (NRF_RNG->EVENTS_VALRDY == 0) { - /* Sleep and wakeup on ARM event (interrupt) */ - SCB->SCR |= SCB_SCR_SEVONPEND_Msk; - __SEV(); - __WFE(); - __WFE(); - } - - /* Read byte */ - buf[i] = (char)NRF_RNG->VALUE; - - /* Mark as read */ - NRF_RNG->EVENTS_VALRDY = 0; - - /* Clear interrupt so we can wake up again */ - nvicClearPending(RNG_IRQn); - } - return MSG_OK; -} - -#endif /* HAL_USE_RNG */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h deleted file mode 100644 index 0ad0bc6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - RNG for ChibiOS - Copyright (C) 2016 Stephane D'Alu - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51/NRF51822/rng_lld.h - * @brief NRF51 RNG subsystem low level driver header. - * - * @addtogroup RNG - * @{ - */ - -#ifndef HAL_RNG_LLD_H -#define HAL_RNG_LLD_H - -#if (HAL_USE_RNG == TRUE) || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief RNG1 driver enable switch. - * @details If set to @p TRUE the support for RNG1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_RNG_USE_RNG1) || defined(__DOXYGEN__) -#define NRF51_RNG_USE_RNG1 FALSE -#endif - -/** - * @brief RNG1 driver enable switch. - * @details If set to @p TRUE the support for RNG1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_RNG_USE_RNG1) || defined(__DOXYGEN__) -#define NRF51_RNG_USE_POWER_ON_WRITE FALSE -#endif - -/** - * @brief RNG1 interrupt priority level setting. - */ -#if !defined(NRF51_RNG_RNG1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_RNG_RNG1_IRQ_PRIORITY 3 -#endif - - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if NRF51_RNG_USE_RNG1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_RNG_RNG1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to RNG1" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief Type of a structure representing an RNG driver. - */ -typedef struct RNGDriver RNGDriver; - -/** - * @brief Driver configuration structure. - */ -typedef struct { - /* End of the mandatory fields.*/ - /** - * @brief Activate the digital error correction - * - * @details A digital corrector algorithm is employed to remove any - * bias toward '1' or '0'. Disabling it offers a substantial - * speed advantage, but may result in a statistical distribution - * that is not perfectly uniform. - * - * @note On average, it take 167µs to get a byte without digitial - * error correction and 677µs with, but no garantee is made - * on the necessary time to generate one byte. - */ - uint8_t digital_error_correction:1; - /** - * @brief Only power the RNG device when requeting random bytes - * - * @details Device will not be powered when started/stopped - * but only when writint bytes. - */ - uint8_t power_on_write:1; -} RNGConfig; - - -/** - * @brief Structure representing an RNG driver. - */ -struct RNGDriver { - /** - * @brief Driver state. - */ - rngstate_t state; - /** - * @brief Current configuration data. - */ - const RNGConfig *config; -#if RNG_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) - /** - * @brief Mutex protecting the peripheral. - */ - mutex_t mutex; -#endif /* RNG_USE_MUTUAL_EXCLUSION */ - /* End of the mandatory fields.*/ - /** - * @brief Pointer to the RNGx registers block. - */ - NRF_RNG_Type *rng; -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if NRF51_RNG_USE_RNG1 && !defined(__DOXYGEN__) -extern RNGDriver RNGD1; -#endif /* NRF51_RNG_USE_RNG1 */ - -#ifdef __cplusplus -extern "C" { -#endif - void rng_lld_init(void); - void rng_lld_start(RNGDriver *rngp); - void rng_lld_stop(RNGDriver *rngp); - msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, - systime_t timeout); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_RNG */ - -#endif /* HAL_RNG_LLD_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c deleted file mode 100644 index 029c5da..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c +++ /dev/null @@ -1,325 +0,0 @@ -/*
- Copyright (C) 2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file serial_lld.c
- * @brief NRF51822 serial subsystem low level driver source.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#include "hal.h"
-
-#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__)
-
-#include "nrf51.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/** @brief USART1 serial driver identifier.*/
-#if (NRF51_SERIAL_USE_UART0 == TRUE) || defined(__DOXYGEN__)
-SerialDriver SD1;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/**
- * @brief Driver default configuration.
- */
-static const SerialConfig default_config = {
- .speed = 38400,
- .tx_pad = NRF51_SERIAL_PAD_DISCONNECTED,
- .rx_pad = NRF51_SERIAL_PAD_DISCONNECTED,
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- .rts_pad = NRF51_SERIAL_PAD_DISCONNECTED,
- .cts_pad = NRF51_SERIAL_PAD_DISCONNECTED,
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*
- * @brief Maps a baudrate speed to a BAUDRATE register value.
- */
-
-/**
- * @brief Common UART configuration.
- *
- */
-static void configure_uart(const SerialConfig *config)
-{
- uint32_t speed = UART_BAUDRATE_BAUDRATE_Baud250000;
-
- switch (config->speed) {
- case 1200: speed = UART_BAUDRATE_BAUDRATE_Baud1200; break;
- case 2400: speed = UART_BAUDRATE_BAUDRATE_Baud2400; break;
- case 4800: speed = UART_BAUDRATE_BAUDRATE_Baud4800; break;
- case 9600: speed = UART_BAUDRATE_BAUDRATE_Baud9600; break;
- case 14400: speed = UART_BAUDRATE_BAUDRATE_Baud14400; break;
- case 19200: speed = UART_BAUDRATE_BAUDRATE_Baud19200; break;
- case 28800: speed = UART_BAUDRATE_BAUDRATE_Baud28800; break;
- case 38400: speed = UART_BAUDRATE_BAUDRATE_Baud38400; break;
- case 57600: speed = UART_BAUDRATE_BAUDRATE_Baud57600; break;
- case 76800: speed = UART_BAUDRATE_BAUDRATE_Baud76800; break;
- case 115200: speed = UART_BAUDRATE_BAUDRATE_Baud115200; break;
- case 230400: speed = UART_BAUDRATE_BAUDRATE_Baud230400; break;
- case 250000: speed = UART_BAUDRATE_BAUDRATE_Baud250000; break;
- case 460800: speed = UART_BAUDRATE_BAUDRATE_Baud460800; break;
- case 921600: speed = UART_BAUDRATE_BAUDRATE_Baud921600; break;
- case 1000000: speed = UART_BAUDRATE_BAUDRATE_Baud1M; break;
- default: osalDbgAssert(0, "invalid baudrate"); break;
- };
-
- /* Configure PINs mode */
- if (config->tx_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
- palSetPadMode(IOPORT1, config->tx_pad, PAL_MODE_OUTPUT_PUSHPULL);
- }
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
- palSetPadMode(IOPORT1, config->rx_pad, PAL_MODE_INPUT);
- }
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- if (config->rts_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
- palSetPadMode(IOPORT1, config->rts_pad, PAL_MODE_OUTPUT_PUSHPULL);
- }
- if (config->cts_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
- palSetPadMode(IOPORT1, config->cts_pad, PAL_MODE_INPUT);
- }
-#endif
-
- /* Select PINs used by UART */
- NRF_UART0->PSELTXD = config->tx_pad;
- NRF_UART0->PSELRXD = config->rx_pad;
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- NRF_UART0->PSELRTS = config->rts_pad;
- NRF_UART0->PSELCTS = config->cts_pad;
-#else
- NRF_UART0->PSELRTS = NRF51_SERIAL_PAD_DISCONNECTED;
- NRF_UART0->PSELCTS = NRF51_SERIAL_PAD_DISCONNECTED;
-#endif
-
- /* Set baud rate */
- NRF_UART0->BAUDRATE = speed;
-
- /* Set config */
- NRF_UART0->CONFIG = (UART_CONFIG_PARITY_Excluded << UART_CONFIG_PARITY_Pos);
-
- /* Adjust flow control */
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- if ((config->rts_pad < TOTAL_GPIO_PADS) ||
- (config->cts_pad < TOTAL_GPIO_PADS)) {
- NRF_UART0->CONFIG |= UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos;
- } else {
- NRF_UART0->CONFIG &= ~(UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos);
- }
-#else
- NRF_UART0->CONFIG &= ~(UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos);
-#endif
-
- /* Enable UART and clear events */
- NRF_UART0->ENABLE = UART_ENABLE_ENABLE_Enabled;
- NRF_UART0->EVENTS_RXDRDY = 0;
- NRF_UART0->EVENTS_TXDRDY = 0;
-
-
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
- while (NRF_UART0->EVENTS_RXDRDY != 0) {
- (void)NRF_UART0->RXD;
- }
- }
-}
-
-
-/**
- * @brief Driver output notification.
- */
-#if NRF51_SERIAL_USE_UART0 || defined(__DOXYGEN__)
-static void notify1(io_queue_t *qp)
-{
- SerialDriver *sdp = &SD1;
-
- (void)qp;
-
- if (NRF_UART0->PSELTXD == NRF51_SERIAL_PAD_DISCONNECTED)
- return;
-
- if (!sdp->tx_busy) {
- msg_t b = oqGetI(&sdp->oqueue);
-
- if (b < Q_OK) {
- chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
- NRF_UART0->TASKS_STOPTX = 1;
- return;
- }
- sdp->tx_busy = 1;
- NRF_UART0->TASKS_STARTTX = 1;
- NRF_UART0->TXD = b;
- }
-}
-#endif
-
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if NRF51_SERIAL_USE_UART0 || defined(__DOXYGEN__)
-OSAL_IRQ_HANDLER(Vector48) {
-
- OSAL_IRQ_PROLOGUE();
-
- SerialDriver *sdp = &SD1;
- uint32_t isr = NRF_UART0->INTENSET;
-
- if ((NRF_UART0->EVENTS_RXDRDY != 0) && (isr & UART_INTENSET_RXDRDY_Msk)) {
- // Clear UART RX event flag
- NRF_UART0->EVENTS_RXDRDY = 0;
-
- osalSysLockFromISR();
- if (iqIsEmptyI(&sdp->iqueue))
- chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE);
- if (iqPutI(&sdp->iqueue, NRF_UART0->RXD) < Q_OK)
- chnAddFlagsI(sdp, SD_OVERRUN_ERROR);
- osalSysUnlockFromISR();
- }
-
- if ((NRF_UART0->EVENTS_TXDRDY != 0) && (isr & UART_INTENSET_TXDRDY_Msk)) {
- msg_t b;
-
- // Clear UART TX event flag.
- NRF_UART0->EVENTS_TXDRDY = 0;
-
- osalSysLockFromISR();
- b = oqGetI(&sdp->oqueue);
- osalSysUnlockFromISR();
-
- if (b < Q_OK) {
- osalSysLockFromISR();
- chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
- osalSysUnlockFromISR();
- NRF_UART0->TASKS_STOPTX = 1;
- sdp->tx_busy = 0;
- } else {
- sdp->tx_busy = 1;
- NRF_UART0->TXD = b;
- }
- }
-
- /* TODO: Error handling for EVENTS_ERROR */
- if ((NRF_UART0->EVENTS_ERROR != 0) && (isr & UART_INTENSET_ERROR_Msk)) {
- // Clear UART ERROR event flag.
- NRF_UART0->EVENTS_ERROR = 0;
- }
-
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level serial driver initialization.
- *
- * @notapi
- */
-void sd_lld_init(void) {
-
-#if NRF51_SERIAL_USE_UART0 == TRUE
- sdObjectInit(&SD1, NULL, notify1);
-#endif
-}
-
-/**
- * @brief Low level serial driver configuration and (re)start.
- *
- * @param[in] sdp pointer to a @p SerialDriver object
- * @param[in] config the architecture-dependent serial driver configuration.
- * If this parameter is set to @p NULL then a default
- * configuration is used.
- *
- * @notapi
- */
-void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
-
- if (config == NULL)
- config = &default_config;
-
- osalDbgAssert(
- (config->rx_pad < TOTAL_GPIO_PADS) || (config->tx_pad < TOTAL_GPIO_PADS),
- "must configure at least an RX or TX pad");
-
- if (sdp->state == SD_STOP) {
-
-#if NRF51_SERIAL_USE_UART0 == TRUE
- if (sdp == &SD1) {
- configure_uart(config);
-
- // Enable UART interrupt
- NRF_UART0->INTENCLR = (uint32_t)-1;
- NRF_UART0->INTENSET = UART_INTENSET_ERROR_Msk;
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED)
- NRF_UART0->INTENSET |= UART_INTENSET_RXDRDY_Msk;
- if (config->tx_pad != NRF51_SERIAL_PAD_DISCONNECTED)
- NRF_UART0->INTENSET |= UART_INTENSET_TXDRDY_Msk;
-
- nvicEnableVector(UART0_IRQn, NRF51_SERIAL_UART0_PRIORITY);
-
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED)
- NRF_UART0->TASKS_STARTRX = 1;
- }
-#endif
-
- }
-}
-
-/**
- * @brief Low level serial driver stop.
- * @details De-initializes the USART, stops the associated clock, resets the
- * interrupt vector.
- *
- * @param[in] sdp pointer to a @p SerialDriver object
- *
- * @notapi
- */
-void sd_lld_stop(SerialDriver *sdp) {
-
- if (sdp->state == SD_READY) {
-
-#if NRF51_SERIAL_USE_UART0 == TRUE
- if (&SD1 == sdp) {
- nvicDisableVector(UART0_IRQn);
- NRF_UART0->ENABLE = UART_ENABLE_ENABLE_Disabled;
- }
-#endif
- }
-}
-
-#endif /* HAL_USE_SERIAL == TRUE */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h deleted file mode 100644 index 79955b1..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h +++ /dev/null @@ -1,155 +0,0 @@ -/*
- Copyright (C) 2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file serial_lld.h
- * @brief NRF51822 serial subsystem low level driver header.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#ifndef HAL_SERIAL_LLD_H
-#define HAL_SERIAL_LLD_H
-
-#if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name PLATFORM configuration options
- * @{
- */
-/**
- * @brief SD flow control enable switch.
- * @details If set to @p TRUE the support for hardware flow control
- * is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF51_SERIAL_USE_HWFLOWCTRL) || defined(__DOXYGEN__)
-#define NRF51_SERIAL_USE_HWFLOWCTRL FALSE
-#endif
-
-/**
- * @brief SD1 driver enable switch.
- * @details If set to @p TRUE the support for SD1 is included.
- * @note The default is @p FALSE.
- */
-#if !defined(NRF51_SERIAL_USE_UART0) || defined(__DOXYGEN__)
-#define NRF51_SERIAL_USE_UART0 FALSE
-#endif
-
-/**
- * @brief UART0 interrupt priority level setting.
- */
-#if !defined(NRF51_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_SERIAL_UART0_PRIORITY 3
-#endif
-
-/* Value indicating that no pad is connected to this UART register. */
-#define NRF51_SERIAL_PAD_DISCONNECTED 0xFFFFFFFFU
-#define NRF51_SERIAL_INVALID_BAUDRATE 0xFFFFFFFFU
-
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if NRF51_SERIAL_USE_UART0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SERIAL_UART0_PRIORITY)
-#error "Invalid IRQ priority assigned to UART0"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief NRF51 Serial Driver configuration structure.
- * @details An instance of this structure must be passed to @p sdStart()
- * in order to configure and start a serial driver operations.
- * @note This structure content is architecture dependent, each driver
- * implementation defines its own version and the custom static
- * initializers.
- */
-typedef struct {
- /**
- * @brief Bit rate.
- */
- uint32_t speed;
- /* End of the mandatory fields.*/
- uint32_t tx_pad;
- uint32_t rx_pad;
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- uint32_t rts_pad;
- uint32_t cts_pad;
-#endif
-} SerialConfig;
-
-/**
- * @brief @p SerialDriver specific data.
- */
-#define _serial_driver_data \
- _base_asynchronous_channel_data \
- /* Driver state.*/ \
- sdstate_t state; \
- /* Input queue.*/ \
- input_queue_t iqueue; \
- /* Output queue.*/ \
- output_queue_t oqueue; \
- /* Input circular buffer.*/ \
- uint8_t ib[SERIAL_BUFFERS_SIZE]; \
- /* Output circular buffer.*/ \
- uint8_t ob[SERIAL_BUFFERS_SIZE]; \
- /* 1 if port is busy transmitting, 0 otherwise. */ \
- uint8_t tx_busy; \
- /* End of the mandatory fields.*/ \
- thread_t *thread;
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if (NRF51_SERIAL_USE_UART0 == TRUE) && !defined(__DOXYGEN__)
-extern SerialDriver SD1;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
- void sd_lld_stop(SerialDriver *sdp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SERIAL == TRUE */
-
-#endif /* HAL_SERIAL_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c deleted file mode 100644 index 7a70c13..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c +++ /dev/null @@ -1,374 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/spi_lld.c
- * @brief NRF51822 low level SPI driver code.
- *
- * @addtogroup SPI
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_SPI || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-#if NRF51_SPI_USE_SPI0 || defined(__DOXYGEN__)
-/** @brief SPI1 driver identifier.*/
-SPIDriver SPID1;
-#endif
-
-#if NRF51_SPI_USE_SPI1 || defined(__DOXYGEN__)
-/** @brief SPI2 driver identifier.*/
-SPIDriver SPID2;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Preloads the transmit FIFO.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- */
-static void port_fifo_preload(SPIDriver *spip) {
- NRF_SPI_Type *port = spip->port;
-
- if (spip->txcnt > 0 && spip->txptr != NULL)
- port->TXD = *(uint8_t *)spip->txptr++;
- else
- port->TXD = 0xFF;
- spip->txcnt--;
-}
-
-#if defined(__GNUC__)
-__attribute__((noinline))
-#endif
-/**
- * @brief Common IRQ handler.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- */
-static void serve_interrupt(SPIDriver *spip) {
- NRF_SPI_Type *port = spip->port;
-
- // Clear SPI READY event flag
- port->EVENTS_READY = 0;
-
- if (spip->rxptr != NULL) {
- *(uint8_t *)spip->rxptr++ = port->RXD;
- }
- else {
- (void)port->RXD;
- if (--spip->rxcnt == 0) {
- osalDbgAssert(spip->txcnt == 0, "counter out of synch");
- /* Stops the IRQ sources.*/
- spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos);
- /* Portable SPI ISR code defined in the high level driver, note, it is
- a macro.*/
- _spi_isr_code(spip);
- return;
- }
- }
- if (spip->txcnt > 0) {
- port_fifo_preload(spip);
- }
- else {
- spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos);
- /* Portable SPI ISR code defined in the high level driver, note, it is
- a macro.*/
- _spi_isr_code(spip);
- }
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if NRF51_SPI_USE_SPI0 || defined(__DOXYGEN__)
-/**
- * @brief SPI0 interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(Vector4C) {
-
- CH_IRQ_PROLOGUE();
- serve_interrupt(&SPID1);
- CH_IRQ_EPILOGUE();
-}
-#endif
-#if NRF51_SPI_USE_SPI1 || defined(__DOXYGEN__)
-/**
- * @brief SPI1 interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(Vector50) {
-
- CH_IRQ_PROLOGUE();
- serve_interrupt(&SPID2);
- CH_IRQ_EPILOGUE();
-}
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level SPI driver initialization.
- *
- * @notapi
- */
-void spi_lld_init(void) {
-
-#if NRF51_SPI_USE_SPI0
- spiObjectInit(&SPID1);
- SPID1.port = NRF_SPI0;
-#endif
-#if NRF51_SPI_USE_SPI1
- spiObjectInit(&SPID2);
- SPID2.port = NRF_SPI1;
-#endif
-}
-
-/**
- * @brief Configures and activates the SPI peripheral.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- *
- * @notapi
- */
-void spi_lld_start(SPIDriver *spip) {
- uint32_t config;
-
- if (spip->state == SPI_STOP) {
-#if NRF51_SPI_USE_SPI0
- if (&SPID1 == spip)
- nvicEnableVector(SPI0_TWI0_IRQn, NRF51_SPI_SPI0_IRQ_PRIORITY);
-#endif
-#if NRF51_SPI_USE_SPI1
- if (&SPID2 == spip)
- nvicEnableVector(SPI1_TWI1_IRQn, NRF51_SPI_SPI1_IRQ_PRIORITY);
-#endif
- }
-
- config = spip->config->lsbfirst ?
- (SPI_CONFIG_ORDER_LsbFirst << SPI_CONFIG_ORDER_Pos) :
- (SPI_CONFIG_ORDER_MsbFirst << SPI_CONFIG_ORDER_Pos);
-
- switch (spip->config->mode) {
- case 1:
- config |= (SPI_CONFIG_CPOL_ActiveLow << SPI_CONFIG_CPOL_Pos);
- config |= (SPI_CONFIG_CPHA_Trailing << SPI_CONFIG_CPHA_Pos);
- break;
- case 2:
- config |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos);
- config |= (SPI_CONFIG_CPHA_Leading << SPI_CONFIG_CPHA_Pos);
- break;
- case 3:
- config |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos);
- config |= (SPI_CONFIG_CPHA_Trailing << SPI_CONFIG_CPHA_Pos);
- break;
- default:
- config |= (SPI_CONFIG_CPOL_ActiveLow << SPI_CONFIG_CPOL_Pos);
- config |= (SPI_CONFIG_CPHA_Leading << SPI_CONFIG_CPHA_Pos);
- break;
- }
-
- /* Configuration.*/
- spip->port->CONFIG = config;
- spip->port->PSELSCK = spip->config->sckpad;
- spip->port->PSELMOSI = spip->config->mosipad;
- spip->port->PSELMISO = spip->config->misopad;
- spip->port->FREQUENCY = spip->config->freq;
- spip->port->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
-
- /* clear events flag */
- spip->port->EVENTS_READY = 0;
-}
-
-/**
- * @brief Deactivates the SPI peripheral.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- *
- * @notapi
- */
-void spi_lld_stop(SPIDriver *spip) {
-
- if (spip->state != SPI_STOP) {
- spip->port->ENABLE = (SPI_ENABLE_ENABLE_Disabled << SPI_ENABLE_ENABLE_Pos);
- spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos);
-#if NRF51_SPI_USE_SPI0
- if (&SPID1 == spip)
- nvicDisableVector(SPI0_TWI0_IRQn);
-#endif
-#if NRF51_SPI_USE_SPI1
- if (&SPID2 == spip)
- nvicDisableVector(SPI1_TWI1_IRQn);
-#endif
- }
-}
-
-/**
- * @brief Asserts the slave select signal and prepares for transfers.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- *
- * @notapi
- */
-void spi_lld_select(SPIDriver *spip) {
-
- palClearPad(IOPORT1, spip->config->sspad);
-}
-
-/**
- * @brief Deasserts the slave select signal.
- * @details The previously selected peripheral is unselected.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- *
- * @notapi
- */
-void spi_lld_unselect(SPIDriver *spip) {
-
- palSetPad(IOPORT1, spip->config->sspad);
-}
-
-/**
- * @brief Ignores data on the SPI bus.
- * @details This function transmits a series of idle words on the SPI bus and
- * ignores the received data. This function can be invoked even
- * when a slave select signal has not been yet asserted.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- * @param[in] n number of words to be ignored
- *
- * @notapi
- */
-void spi_lld_ignore(SPIDriver *spip, size_t n) {
-
- spip->rxptr = NULL;
- spip->txptr = NULL;
- spip->rxcnt = spip->txcnt = n;
- port_fifo_preload(spip);
- spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos);
-}
-
-/**
- * @brief Exchanges data on the SPI bus.
- * @details This asynchronous function starts a simultaneous transmit/receive
- * operation.
- * @post At the end of the operation the configured callback is invoked.
- * @note The buffers are organized as uint8_t arrays for data sizes below or
- * equal to 8 bits else it is organized as uint16_t arrays.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- * @param[in] n number of words to be exchanged
- * @param[in] txbuf the pointer to the transmit buffer
- * @param[out] rxbuf the pointer to the receive buffer
- *
- * @notapi
- */
-void spi_lld_exchange(SPIDriver *spip, size_t n,
- const void *txbuf, void *rxbuf) {
-
- spip->rxptr = rxbuf;
- spip->txptr = txbuf;
- spip->rxcnt = spip->txcnt = n;
- port_fifo_preload(spip);
- spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos);
-}
-
-/**
- * @brief Sends data over the SPI bus.
- * @details This asynchronous function starts a transmit operation.
- * @post At the end of the operation the configured callback is invoked.
- * @note The buffers are organized as uint8_t arrays for data sizes below or
- * equal to 8 bits else it is organized as uint16_t arrays.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- * @param[in] n number of words to send
- * @param[in] txbuf the pointer to the transmit buffer
- *
- * @notapi
- */
-void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
-
- spip->rxptr = NULL;
- spip->txptr = txbuf;
- spip->rxcnt = spip->txcnt = n;
- port_fifo_preload(spip);
- spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos);
-}
-
-/**
- * @brief Receives data from the SPI bus.
- * @details This asynchronous function starts a receive operation.
- * @post At the end of the operation the configured callback is invoked.
- * @note The buffers are organized as uint8_t arrays for data sizes below or
- * equal to 8 bits else it is organized as uint16_t arrays.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- * @param[in] n number of words to receive
- * @param[out] rxbuf the pointer to the receive buffer
- *
- * @notapi
- */
-void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
-
- spip->rxptr = rxbuf;
- spip->txptr = NULL;
- spip->rxcnt = spip->txcnt = n;
- port_fifo_preload(spip);
- spip->port->INTENSET = (SPI_INTENCLR_READY_Enabled << SPI_INTENCLR_READY_Pos);
-}
-
-/**
- * @brief Exchanges one frame using a polled wait.
- * @details This synchronous function exchanges one frame using a polled
- * synchronization method. This function is useful when exchanging
- * small amount of data on high speed channels, usually in this
- * situation is much more efficient just wait for completion using
- * polling than suspending the thread waiting for an interrupt.
- *
- * @param[in] spip pointer to the @p SPIDriver object
- * @param[in] frame the data frame to send over the SPI bus
- * @return The received data frame from the SPI bus.
- */
-uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) {
-
- spip->port->TXD = (uint8_t)frame;
- while (spip->port->EVENTS_READY == 0)
- ;
- spip->port->EVENTS_READY = 0;
- return spip->port->RXD;
-}
-
-#endif /* HAL_USE_SPI */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h deleted file mode 100644 index 4d1c452..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h +++ /dev/null @@ -1,238 +0,0 @@ -/*
- Copyright (C) 2015 Stephen Caudle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/spi_lld.h
- * @brief NRF51822 low level SPI driver header.
- *
- * @addtogroup SPI
- * @{
- */
-
-#ifndef HAL_SPI_LLD_H
-#define HAL_SPI_LLD_H
-
-#if HAL_USE_SPI || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @brief SPI0 interrupt priority level setting.
- */
-#if !defined(NRF51_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_SPI_SPI0_IRQ_PRIORITY 3
-#endif
-
-/**
- * @brief SPI1 interrupt priority level setting.
- */
-#if !defined(NRF51_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_SPI_SPI1_IRQ_PRIORITY 3
-#endif
-
-/**
- * @brief Overflow error hook.
- * @details The default action is to stop the system.
- */
-#if !defined(NRF51_SPI_SPI_ERROR_HOOK) || defined(__DOXYGEN__)
-#define NRF51_SPI_SPI_ERROR_HOOK() chSysHalt()
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if !NRF51_SPI_USE_SPI0 && !NRF51_SPI_USE_SPI1
-#error "SPI driver activated but no SPI peripheral assigned"
-#endif
-
-#if NRF51_SPI_USE_SPI0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SPI_SPI0_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to SPI0"
-#endif
-
-#if NRF51_SPI_USE_SPI1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SPI_SPI1_IRQ_PRIORITY)
-#error "Invalid IRQ priority assigned to SPI1"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Type of a structure representing an SPI driver.
- */
-typedef struct SPIDriver SPIDriver;
-
-/**
- * @brief SPI notification callback type.
- *
- * @param[in] spip pointer to the @p SPIDriver object triggering the
- * callback
- */
-typedef void (*spicallback_t)(SPIDriver *spip);
-
-/**
- * @brief SPI frequency
- */
-typedef enum {
- NRF51_SPI_FREQ_125KBPS = (SPI_FREQUENCY_FREQUENCY_K125 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_250KBPS = (SPI_FREQUENCY_FREQUENCY_K250 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_500KBPS = (SPI_FREQUENCY_FREQUENCY_K500 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_1MBPS = (SPI_FREQUENCY_FREQUENCY_M1 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_2MBPS = (SPI_FREQUENCY_FREQUENCY_M2 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_4MBPS = (SPI_FREQUENCY_FREQUENCY_M4 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_8MBPS = (SPI_FREQUENCY_FREQUENCY_M8 << SPI_FREQUENCY_FREQUENCY_Pos),
-} spifreq_t;
-
-/**
- * @brief Driver configuration structure.
- */
-typedef struct {
- /**
- * @brief Operation complete callback or @p NULL.
- */
- spicallback_t end_cb;
- /**
- * @brief The frequency of the SPI peripheral
- */
- spifreq_t freq;
- /**
- * @brief The SCK pad
- */
- uint16_t sckpad;
- /**
- * @brief The MOSI pad
- */
- uint16_t mosipad;
- /**
- * @brief The MOSI pad
- */
- uint16_t misopad;
- /* End of the mandatory fields.*/
- /**
- * @brief The chip select line pad number.
- */
- uint16_t sspad;
- /**
- * @brief Shift out least significant bit first
- */
- uint8_t lsbfirst;
- /**
- * @brief SPI mode
- */
- uint8_t mode;
-} SPIConfig;
-
-/**
- * @brief Structure representing a SPI driver.
- */
-struct SPIDriver {
- /**
- * @brief Driver state.
- */
- spistate_t state;
- /**
- * @brief Current configuration data.
- */
- const SPIConfig *config;
-#if SPI_USE_WAIT || defined(__DOXYGEN__)
- /**
- * @brief Waiting thread.
- */
- thread_reference_t thread;
-#endif /* SPI_USE_WAIT */
-#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
-#if CH_CFG_USE_MUTEXES || defined(__DOXYGEN__)
- /**
- * @brief Mutex protecting the bus.
- */
- mutex_t mutex;
-#elif CH_CFG_USE_SEMAPHORES
- semaphore_t semaphore;
-#endif
-#endif /* SPI_USE_MUTUAL_EXCLUSION */
-#if defined(SPI_DRIVER_EXT_FIELDS)
- SPI_DRIVER_EXT_FIELDS
-#endif
- /* End of the mandatory fields.*/
- /**
- * @brief Pointer to the SPI port.
- */
- NRF_SPI_Type *port;
- /**
- * @brief Number of bytes yet to be received.
- */
- uint32_t rxcnt;
- /**
- * @brief Receive pointer or @p NULL.
- */
- void *rxptr;
- /**
- * @brief Number of bytes yet to be transmitted.
- */
- uint32_t txcnt;
- /**
- * @brief Transmit pointer or @p NULL.
- */
- const void *txptr;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if NRF51_SPI_USE_SPI0 && !defined(__DOXYGEN__)
-extern SPIDriver SPID1;
-#endif
-#if NRF51_SPI_USE_SPI1 && !defined(__DOXYGEN__)
-extern SPIDriver SPID2;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void spi_lld_init(void);
- void spi_lld_start(SPIDriver *spip);
- void spi_lld_stop(SPIDriver *spip);
- void spi_lld_select(SPIDriver *spip);
- void spi_lld_unselect(SPIDriver *spip);
- void spi_lld_ignore(SPIDriver *spip, size_t n);
- void spi_lld_exchange(SPIDriver *spip, size_t n,
- const void *txbuf, void *rxbuf);
- void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
- void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
- uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SPI */
-
-#endif /* HAL_SPI_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c deleted file mode 100644 index 181bc06..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.c +++ /dev/null @@ -1,294 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2015 Fabio Utzig
- 2016 Stephane D'Alu
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file st_lld.c
- * @brief NRF51822 ST subsystem low level driver source.
- *
- * @addtogroup ST
- * @{
- */
-
-#include "hal.h"
-
-#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
-#if NRF51_ST_USE_RTC0 == TRUE
-/**
- * @brief System Timer vector (RTC0)
- * @details This interrupt is used for system tick in periodic mode
- * if selected with NRF51_ST_USE_RTC0
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector6C) {
-
- OSAL_IRQ_PROLOGUE();
-
- NRF_RTC0->EVENTS_TICK = 0;
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-#if NRF51_ST_USE_RTC1 == TRUE
-/**
- * @brief System Timer vector (RTC1)
- * @details This interrupt is used for system tick in periodic mode
- * if selected with NRF51_ST_USE_RTC1
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector84) {
-
- OSAL_IRQ_PROLOGUE();
-
- NRF_RTC1->EVENTS_TICK = 0;
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-#if NRF51_ST_USE_TIMER0 == TRUE
-/**
- * @brief System Timer vector. (TIMER0)
- * @details This interrupt is used for system tick in periodic mode
- * if selected with NRF51_ST_USE_TIMER0
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector60) {
-
- OSAL_IRQ_PROLOGUE();
-
- /* Clear timer compare event */
- if (NRF_TIMER0->EVENTS_COMPARE[0] != 0)
- NRF_TIMER0->EVENTS_COMPARE[0] = 0;
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
-
-#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__)
-#if NRF51_ST_USE_RTC0 == TRUE
-/**
- * @brief System Timer vector (RTC0)
- * @details This interrupt is used for freerunning mode (tick-less)
- * if selected with NRF51_ST_USE_RTC0
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector6C) {
-
- OSAL_IRQ_PROLOGUE();
-
- if (NRF_RTC0->EVENTS_COMPARE[0]) {
- NRF_RTC0->EVENTS_COMPARE[0] = 0;
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
- }
-
-#if OSAL_ST_RESOLUTION == 16
- if (NRF_RTC0->EVENTS_COMPARE[1]) {
- NRF_RTC0->EVENTS_COMPARE[1] = 0;
- NRF_RTC0->TASKS_CLEAR = 1;
- }
-#endif
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-#if NRF51_ST_USE_RTC1 == TRUE
-/**
- * @brief System Timer vector (RTC1)
- * @details This interrupt is used for freerunning mode (tick-less)
- * if selected with NRF51_ST_USE_RTC1
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector84) {
-
- OSAL_IRQ_PROLOGUE();
-
- if (NRF_RTC1->EVENTS_COMPARE[0]) {
- NRF_RTC1->EVENTS_COMPARE[0] = 0;
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
- }
-
-#if OSAL_ST_RESOLUTION == 16
- if (NRF_RTC1->EVENTS_COMPARE[1]) {
- NRF_RTC1->EVENTS_COMPARE[1] = 0;
- NRF_RTC1->TASKS_CLEAR = 1;
- }
-#endif
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level ST driver initialization.
- *
- * @notapi
- */
-void st_lld_init(void) {
-#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING
-
-#if NRF51_ST_USE_RTC0 == TRUE
- /* Using RTC with prescaler */
- NRF_RTC0->TASKS_STOP = 1;
- NRF_RTC0->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
- NRF_RTC0->EVTENCLR = RTC_EVTENSET_COMPARE0_Msk;
- NRF_RTC0->EVENTS_COMPARE[0] = 0;
- NRF_RTC0->INTENSET = RTC_INTENSET_COMPARE0_Msk;
-#if OSAL_ST_RESOLUTION == 16
- NRF_RTC0->CC[1] = 0x10000; /* 2^16 */
- NRF_RTC0->EVENTS_COMPARE[1] = 0;
- NRF_RTC0->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
- NRF_RTC0->INTENSET = RTC_INTENSET_COMPARE1_Msk;
-#endif
- NRF_RTC0->TASKS_CLEAR = 1;
-
- /* Start timer */
- nvicEnableVector(RTC0_IRQn, NRF51_ST_PRIORITY);
- NRF_RTC0->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC0 == TRUE */
-
-#if NRF51_ST_USE_RTC1 == TRUE
- /* Using RTC with prescaler */
- NRF_RTC1->TASKS_STOP = 1;
- NRF_RTC1->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
- NRF_RTC1->EVTENCLR = RTC_EVTENSET_COMPARE0_Msk;
- NRF_RTC1->EVENTS_COMPARE[0] = 0;
- NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE0_Msk;
-#if OSAL_ST_RESOLUTION == 16
- NRF_RTC1->CC[1] = 0x10000; /* 2^16 */
- NRF_RTC1->EVENTS_COMPARE[1] = 0;
- NRF_RTC1->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
- NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE1_Msk;
-#endif
- NRF_RTC1->TASKS_CLEAR = 1;
-
- /* Start timer */
- nvicEnableVector(RTC1_IRQn, NRF51_ST_PRIORITY);
- NRF_RTC1->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC1 == TRUE */
-
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
-
-#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC
-
-#if NRF51_ST_USE_RTC0 == TRUE
- /* Using RTC with prescaler */
- NRF_RTC0->TASKS_STOP = 1;
- NRF_RTC0->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
- NRF_RTC0->INTENSET = RTC_INTENSET_TICK_Msk;
-
- /* Start timer */
- nvicEnableVector(RTC0_IRQn, NRF51_ST_PRIORITY);
- NRF_RTC0->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC0 == TRUE */
-
-#if NRF51_ST_USE_RTC1 == TRUE
- /* Using RTC with prescaler */
- NRF_RTC1->TASKS_STOP = 1;
- NRF_RTC1->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
- NRF_RTC1->INTENSET = RTC_INTENSET_TICK_Msk;
-
- /* Start timer */
- nvicEnableVector(RTC1_IRQn, NRF51_ST_PRIORITY);
- NRF_RTC1->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC1 == TRUE */
-
-#if NRF51_ST_USE_TIMER0 == TRUE
- NRF_TIMER0->TASKS_CLEAR = 1;
-
- /*
- * Using 32-bit mode with prescaler 16 configures this
- * timer with a 1MHz clock.
- */
- NRF_TIMER0->BITMODE = 3;
- NRF_TIMER0->PRESCALER = 4;
-
- /*
- * Configure timer 0 compare capture 0 to generate interrupt
- * and clear timer value when event is generated.
- */
- NRF_TIMER0->CC[0] = (1000000 / OSAL_ST_FREQUENCY) - 1;
- NRF_TIMER0->SHORTS = 1;
- NRF_TIMER0->INTENSET = 0x10000;
-
- /* Start timer */
- nvicEnableVector(TIMER0_IRQn, NRF51_ST_PRIORITY);
- NRF_TIMER0->TASKS_START = 1;
-#endif /* NRF51_ST_USE_TIMER0 == TRUE */
-
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
-}
-
-#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h deleted file mode 100644 index 8d12d2e..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_st_lld.h +++ /dev/null @@ -1,275 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file st_lld.h
- * @brief NRF51822 ST subsystem low level driver header.
- * @details This header is designed to be include-able without having to
- * include other files from the HAL.
- *
- * @addtogroup ST
- * @{
- */
-
-#ifndef HAL_ST_LLD_H
-#define HAL_ST_LLD_H
-
-#include "halconf.h"
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @brief Use RTC0 to generates system ticks
- */
-#if !defined(NRF51_ST_USE_RTC0) || defined(__DOXYGEN__)
-#if !defined(SOFTDEVICE_PRESENT)
-#define NRF51_ST_USE_RTC0 TRUE
-#else
-#define NRF51_ST_USE_RTC0 FALSE
-#endif
-#endif
-
-/**
- * @brief Use RTC1 to generates system ticks
- */
-#if !defined(NRF51_ST_USE_RTC1) || defined(__DOXYGEN__)
-#if !defined(SOFTDEVICE_PRESENT)
-#define NRF51_ST_USE_RTC1 FALSE
-#else
-#define NRF51_ST_USE_RTC1 TRUE
-#endif
-#endif
-
-/**
- * @brief Use TIMER0 to generates system ticks
- */
-#if !defined(NRF51_ST_USE_TIMER0) || defined(__DOXYGEN__)
-#define NRF51_ST_USE_TIMER0 FALSE
-#endif
-
-/**
- * @brief ST interrupt priority level setting.
- */
-#if !defined(NRF51_ST_PRIORITY) || defined(__DOXYGEN__)
-#if !defined(SOFTDEVICE_PRESENT)
-#define NRF51_ST_PRIORITY 1
-#else
-#define NRF51_ST_PRIORITY 1
-#endif
-#endif
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-#if OSAL_ST_MODE != OSAL_ST_MODE_NONE
-#if (NRF51_ST_USE_TIMER0 == TRUE) && (NRF51_GPT_USE_TIMER0 == TRUE)
-#error "TIMER0 already used by GPT driver"
-#endif
-
-#if (NRF51_ST_USE_RTC0 == FALSE) && \
- (NRF51_ST_USE_RTC1 == FALSE) && \
- (NRF51_ST_USE_TIMER0 == FALSE)
-#error "One clock source is needed, enable one (RTC0, RTC1, or TIMER0)"
-#endif
-
-#if ((NRF51_ST_USE_RTC0 == TRUE ? 1 : 0) + \
- (NRF51_ST_USE_RTC1 == TRUE ? 1 : 0) + \
- (NRF51_ST_USE_TIMER0 == TRUE ? 1 : 0)) > 1
-#error "Only one clock source can be used (RTC0, RTC1, or TIMER0)"
-#endif
-
-#if defined(SOFTDEVICE_PRESENT)
-#if NRF51_ST_USE_RTC0 == TRUE
-#error "RTC0 cannot be used for system ticks when SOFTDEVICE present"
-#endif
-
-#if NRF51_ST_USE_TIMER0 == TRUE
-#error "TIMER0 cannot be used for system ticks when SOFTDEVICE present"
-#endif
-
-#if NRF51_ST_PRIORITY != 1
-#error "ST priority must be 1 when SOFTDEVICE present"
-#endif
-
-#endif /* defined(SOFTDEVICE_PRESENT) */
-#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
-
-#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING
-#if defined(CH_CFG_ST_TIMEDELTA) && (CH_CFG_ST_TIMEDELTA < 5)
-#error "CH_CFG_ST_TIMEDELTA is too low"
-#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
-#error "Freeruning (tick-less) mode not supported with TIMER, use RTC"
-#endif
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
-
-#if !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_ST_PRIORITY)
-#error "Invalid IRQ priority assigned to ST driver"
-#endif
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void st_lld_init(void);
-#ifdef __cplusplus
-}
-#endif
-
-/*===========================================================================*/
-/* Driver inline functions. */
-/*===========================================================================*/
-
-/**
- * @brief Returns the time counter value.
- *
- * @return The counter value.
- *
- * @notapi
- */
-static inline systime_t st_lld_get_counter(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
- return (systime_t)NRF_RTC0->COUNTER;
-#endif
-#if NRF51_ST_USE_RTC1 == TRUE
- return (systime_t)NRF_RTC1->COUNTER;
-#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
- return (systime_t)0;
-#endif
-}
-
-/**
- * @brief Starts the alarm.
- * @note Makes sure that no spurious alarms are triggered after
- * this call.
- *
- * @param[in] abstime the time to be set for the first alarm
- *
- * @notapi
- */
-static inline void st_lld_start_alarm(systime_t abstime) {
-#if NRF51_ST_USE_RTC0 == TRUE
- NRF_RTC0->CC[0] = abstime;
- NRF_RTC0->EVENTS_COMPARE[0] = 0;
- NRF_RTC0->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
-#endif
-#if NRF51_ST_USE_RTC1 == TRUE
- NRF_RTC1->CC[0] = abstime;
- NRF_RTC1->EVENTS_COMPARE[0] = 0;
- NRF_RTC1->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
-#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
- (void)abstime;
-#endif
-}
-
-/**
- * @brief Stops the alarm interrupt.
- *
- * @notapi
- */
-static inline void st_lld_stop_alarm(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
- NRF_RTC0->EVTENCLR = RTC_EVTENCLR_COMPARE0_Msk;
- NRF_RTC0->EVENTS_COMPARE[0] = 0;
-#endif
-#if NRF51_ST_USE_RTC1 == TRUE
- NRF_RTC1->EVTENCLR = RTC_EVTENCLR_COMPARE0_Msk;
- NRF_RTC1->EVENTS_COMPARE[0] = 0;
-#endif
-}
-
-/**
- * @brief Sets the alarm time.
- *
- * @param[in] abstime the time to be set for the next alarm
- *
- * @notapi
- */
-static inline void st_lld_set_alarm(systime_t abstime) {
-#if NRF51_ST_USE_RTC0 == TRUE
- NRF_RTC0->CC[0] = abstime;
-#endif
-#if NRF51_ST_USE_RTC1 == TRUE
- NRF_RTC1->CC[0] = abstime;
-#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
- (void)abstime;
-#endif
-}
-
-/**
- * @brief Returns the current alarm time.
- *
- * @return The currently set alarm time.
- *
- * @notapi
- */
-static inline systime_t st_lld_get_alarm(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
- return (systime_t)NRF_RTC0->CC[0];
-#endif
-#if NRF51_ST_USE_RTC1 == TRUE
- return (systime_t)NRF_RTC1->CC[0];
-#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
- return (systime_t)0;
-#endif
-}
-
-/**
- * @brief Determines if the alarm is active.
- *
- * @return The alarm status.
- * @retval false if the alarm is not active.
- * @retval true is the alarm is active
- *
- * @notapi
- */
-static inline bool st_lld_is_alarm_active(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
- return NRF_RTC0->EVTEN & RTC_EVTEN_COMPARE0_Msk;
-#endif
-#if NRF51_ST_USE_RTC1 == TRUE
- return NRF_RTC1->EVTEN & RTC_EVTEN_COMPARE0_Msk;
-#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
- return false;
-#endif
-}
-
-#endif /* HAL_ST_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c deleted file mode 100644 index 0ce37ee..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c +++ /dev/null @@ -1,150 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Stephane D'Alu
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/wdg_lld.c
- * @brief WDG Driver subsystem low level driver source template.
- *
- * @addtogroup WDG
- * @{
- */
-
-#include "hal.h"
-
-#if HAL_USE_WDG || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#define RELOAD_REQUEST_VALUE 0x6E524635
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-WDGDriver WDGD1;
-
-/*===========================================================================*/
-/* Driver local variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if WDG_USE_TIMEOUT_CALLBACK == TRUE
-/**
- * @brief Watchdog vector.
- * @details This interrupt is used when watchdog timeout.
- *
- * @note Only 2 cycles at NRF51_LFCLK_FREQUENCY are available
- * to they good bye.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(Vector84) {
-
- OSAL_IRQ_PROLOGUE();
- osalSysLockFromISR();
-
- /* Notify */
- if (WDGD1.config->callback)
- WDGD1.config->callback();
-
- /* Wait for reboot */
- while (1) { /* */ }
-
- osalSysUnlockFromISR();
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level WDG driver initialization.
- *
- * @notapi
- */
-void wdg_lld_init(void) {
- WDGD1.state = WDG_STOP;
- WDGD1.wdt = NRF_WDT;
-}
-
-/**
- * @brief Configures and activates the WDG peripheral.
- *
- * @note Once started there is no way out.
- *
- * @param[in] wdgp pointer to the @p WDGDriver object
- *
- * @notapi
- */
-void wdg_lld_start(WDGDriver *wdgp) {
-#if WDG_USE_TIMEOUT_CALLBACK == TRUE
- wdgp->wdt->INTENSET = WDT_INTENSET_TIMEOUT_Msk;
-#endif
-
- /* When to pause? (halt, sleep) */
- wdgp->wdt->CONFIG =
- (wdgp->config->flags.pause_on_sleep * WDT_CONFIG_SLEEP_Msk) |
- (wdgp->config->flags.pause_on_halt * WDT_CONFIG_HALT_Msk );
-
- /* Timeout in milli-seconds */
- uint64_t tout = (NRF51_LFCLK_FREQUENCY * wdgp->config->timeout_ms / 1000) - 1;
- osalDbgAssert(tout <= 0xFFFFFFFF, "watchdog timout value exceeded");
- wdgp->wdt->CRV = (uint32_t)tout;
-
- /* Reload request (using RR0) */
- wdgp->wdt->RREN = WDT_RREN_RR0_Msk;
-
- /* Say your prayers, little one. */
- wdgp->wdt->TASKS_START = 1;
-}
-
-/**
- * @brief Deactivates the WDG peripheral.
- *
- * @param[in] wdgp pointer to the @p WDGDriver object
- *
- * @api
- */
-void wdg_lld_stop(WDGDriver *wdgp) {
- (void)wdgp;
- osalDbgAssert(false, "WDG cannot be stopped once activated");
-}
-
-/**
- * @brief Reloads WDG's counter.
- *
- * @param[in] wdgp pointer to the @p WDGDriver object
- *
- * @notapi
- */
-void wdg_lld_reset(WDGDriver * wdgp) {
- wdgp->wdt->RR[0] = RELOAD_REQUEST_VALUE;
-}
-
-#endif /* HAL_USE_WDG */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h deleted file mode 100644 index 8fea304..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h +++ /dev/null @@ -1,127 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Stephane D'Alu
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file NRF51822/wdg_lld.h
- * @brief WDG Driver subsystem low level driver header template.
- *
- * @addtogroup WDG
- * @{
- */
-
-#ifndef HAL_WDG_LLD_H
-#define HAL_WDG_LLD_H
-
-#if (HAL_USE_WDG == TRUE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-#define WDG_MAX_TIMEOUT_MS \
- ((uint32_t)(0xFFFFFFFFu * 1000 / NRF51_LFCLK_FREQUENCY))
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-
-/**
- * @brief WDG driver implement timeout callback.
- * @note The default is @p FALSE.
- */
-#if !defined(WDG_USE_TIMEOUT_CALLBACK) || defined(__DOXYGEN__)
-#define WDG_USE_TIMEOUT_CALLBACK FALSE
-#endif
-/** @} */
-
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Type of a structure representing an WDG driver.
- */
-typedef struct WDGDriver WDGDriver;
-
-/**
- * @brief Driver configuration structure.
- * @note It could be empty on some architectures.
- */
-typedef struct {
- struct {
- uint8_t pause_on_sleep : 1;
- uint8_t pause_on_halt : 1;
- } flags;
- uint32_t timeout_ms;
-#if WDG_USE_TIMEOUT_CALLBACK == TRUE
- void (*callback)(void);
-#endif
-} WDGConfig;
-
-
-
-/**
- * @brief Structure representing an WDG driver.
- */
-struct WDGDriver {
- /**
- * @brief Driver state.
- */
- wdgstate_t state;
- /**
- * @brief Current configuration data.
- */
- const WDGConfig *config;
- /* End of the mandatory fields.*/
- NRF_WDT_Type *wdt;
-};
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-extern WDGDriver WDGD1;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void wdg_lld_init(void);
- void wdg_lld_start(WDGDriver *wdgp);
- void wdg_lld_stop(WDGDriver *wdgp);
- void wdg_lld_reset(WDGDriver *wdgp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_WDG == TRUE */
-
-#endif /* HAL_WDG_LLD_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h deleted file mode 100644 index 1ed33d6..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51.h +++ /dev/null @@ -1,1315 +0,0 @@ -
-/****************************************************************************************************//**
- * @file nrf51.h
- *
- * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for
- * nrf51 from Nordic Semiconductor.
- *
- * @version V522
- * @date 26. January 2015
- *
- * @note Generated with SVDConv V2.81d
- * from CMSIS SVD File 'nrf51.xml' Version 522,
- *
- * @par Copyright (c) 2013, Nordic Semiconductor ASA
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * * Redistributions of source code must retain the above copyright notice, this
- * list of conditions and the following disclaimer.
- *
- * * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * * Neither the name of Nordic Semiconductor ASA nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *******************************************************************************************************/
-
-
-
-/** @addtogroup Nordic Semiconductor
- * @{
- */
-
-/** @addtogroup nrf51
- * @{
- */
-
-#ifndef NRF51_H
-#define NRF51_H
-
-#include "nrf51_bitfields.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* ------------------------- Interrupt Number Definition ------------------------ */
-
-typedef enum {
-/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
- NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
- HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
- SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
- PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
- SysTick_IRQn = -1, /*!< 15 System Tick Timer */
-/* ---------------------- nrf51 Specific Interrupt Numbers ---------------------- */
- POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
- RADIO_IRQn = 1, /*!< 1 RADIO */
- UART0_IRQn = 2, /*!< 2 UART0 */
- SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */
- SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */
- GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
- ADC_IRQn = 7, /*!< 7 ADC */
- TIMER0_IRQn = 8, /*!< 8 TIMER0 */
- TIMER1_IRQn = 9, /*!< 9 TIMER1 */
- TIMER2_IRQn = 10, /*!< 10 TIMER2 */
- RTC0_IRQn = 11, /*!< 11 RTC0 */
- TEMP_IRQn = 12, /*!< 12 TEMP */
- RNG_IRQn = 13, /*!< 13 RNG */
- ECB_IRQn = 14, /*!< 14 ECB */
- CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
- WDT_IRQn = 16, /*!< 16 WDT */
- RTC1_IRQn = 17, /*!< 17 RTC1 */
- QDEC_IRQn = 18, /*!< 18 QDEC */
- LPCOMP_IRQn = 19, /*!< 19 LPCOMP */
- SWI0_IRQn = 20, /*!< 20 SWI0 */
- SWI1_IRQn = 21, /*!< 21 SWI1 */
- SWI2_IRQn = 22, /*!< 22 SWI2 */
- SWI3_IRQn = 23, /*!< 23 SWI3 */
- SWI4_IRQn = 24, /*!< 24 SWI4 */
- SWI5_IRQn = 25 /*!< 25 SWI5 */
-} IRQn_Type;
-
-
-/** @addtogroup Configuration_of_CMSIS
- * @{
- */
-
-
-/* ================================================================================ */
-/* ================ Processor and Core Peripheral Section ================ */
-/* ================================================================================ */
-
-/* ----------------Configuration of the Cortex-M0 Processor and Core Peripherals---------------- */
-#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-/** @} */ /* End of group Configuration_of_CMSIS */
-
-#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
-
-
-/* ================================================================================ */
-/* ================ Device Specific Peripheral Section ================ */
-/* ================================================================================ */
-
-
-/** @addtogroup Device_Peripheral_Registers
- * @{
- */
-
-
-/* ------------------- Start of section using anonymous unions ------------------ */
-#if defined(__CC_ARM)
- #pragma push
- #pragma anon_unions
-#elif defined(__ICCARM__)
- #pragma language=extended
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
-/* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning 586
-#else
- #warning Not supported compiler type
-#endif
-
-
-typedef struct {
- __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */
- __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */
- __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */
- __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */
- __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */
- __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */
-} AMLI_RAMPRI_Type;
-
-typedef struct {
- __IO uint32_t SCK; /*!< Pin select for SCK. */
- __IO uint32_t MOSI; /*!< Pin select for MOSI. */
- __IO uint32_t MISO; /*!< Pin select for MISO. */
-} SPIM_PSEL_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer. */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to receive. */
- __I uint32_t AMOUNT; /*!< Number of bytes received in the last transaction. */
-} SPIM_RXD_Type;
-
-typedef struct {
- __IO uint32_t PTR; /*!< Data pointer. */
- __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to send. */
- __I uint32_t AMOUNT; /*!< Number of bytes sent in the last transaction. */
-} SPIM_TXD_Type;
-
-typedef struct {
- __O uint32_t EN; /*!< Enable channel group. */
- __O uint32_t DIS; /*!< Disable channel group. */
-} PPI_TASKS_CHG_Type;
-
-typedef struct {
- __IO uint32_t EEP; /*!< Channel event end-point. */
- __IO uint32_t TEP; /*!< Channel task end-point. */
-} PPI_CH_Type;
-
-
-/* ================================================================================ */
-/* ================ POWER ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Power Control. (POWER)
- */
-
-typedef struct { /*!< POWER Structure */
- __I uint32_t RESERVED0[30];
- __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */
- __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */
- __I uint32_t RESERVED1[34];
- __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */
- __I uint32_t RESERVED2[126];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[61];
- __IO uint32_t RESETREAS; /*!< Reset reason. */
- __I uint32_t RESERVED4[9];
- __I uint32_t RAMSTATUS; /*!< Ram status register. */
- __I uint32_t RESERVED5[53];
- __O uint32_t SYSTEMOFF; /*!< System off register. */
- __I uint32_t RESERVED6[3];
- __IO uint32_t POFCON; /*!< Power failure configuration. */
- __I uint32_t RESERVED7[2];
- __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained
- register. */
- __I uint32_t RESERVED8;
- __IO uint32_t RAMON; /*!< Ram on/off. */
- __I uint32_t RESERVED9[7];
- __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register
- is a retained register. */
- __I uint32_t RESERVED10[3];
- __IO uint32_t RAMONB; /*!< Ram on/off. */
- __I uint32_t RESERVED11[8];
- __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */
- __I uint32_t RESERVED12[291];
- __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */
-} NRF_POWER_Type;
-
-
-/* ================================================================================ */
-/* ================ CLOCK ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Clock control. (CLOCK)
- */
-
-typedef struct { /*!< CLOCK Structure */
- __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */
- __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */
- __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */
- __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */
- __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */
- __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */
- __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */
- __I uint32_t RESERVED0[57];
- __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */
- __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */
- __I uint32_t RESERVED1;
- __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */
- __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */
- __I uint32_t RESERVED2[124];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[63];
- __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */
- __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */
- __I uint32_t RESERVED4;
- __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */
- __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */
- __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is
- triggered. */
- __I uint32_t RESERVED5[62];
- __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */
- __I uint32_t RESERVED6[7];
- __IO uint32_t CTIV; /*!< Calibration timer interval. */
- __I uint32_t RESERVED7[5];
- __IO uint32_t XTALFREQ; /*!< Crystal frequency. */
-} NRF_CLOCK_Type;
-
-
-/* ================================================================================ */
-/* ================ MPU ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Memory Protection Unit. (MPU)
- */
-
-typedef struct { /*!< MPU Structure */
- __I uint32_t RESERVED0[330];
- __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */
- __IO uint32_t RLENR0; /*!< Length of RAM region 0. */
- __I uint32_t RESERVED1[52];
- __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */
- __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */
- __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */
- __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */
-} NRF_MPU_Type;
-
-
-/* ================================================================================ */
-/* ================ PU ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Patch unit. (PU)
- */
-
-typedef struct { /*!< PU Structure */
- __I uint32_t RESERVED0[448];
- __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
- __I uint32_t RESERVED1[24];
- __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
- __I uint32_t RESERVED2[24];
- __IO uint32_t PATCHEN; /*!< Patch enable register. */
- __IO uint32_t PATCHENSET; /*!< Patch enable register. */
- __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
-} NRF_PU_Type;
-
-
-/* ================================================================================ */
-/* ================ AMLI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief AHB Multi-Layer Interface. (AMLI)
- */
-
-typedef struct { /*!< AMLI Structure */
- __I uint32_t RESERVED0[896];
- AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */
-} NRF_AMLI_Type;
-
-
-/* ================================================================================ */
-/* ================ RADIO ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief The radio. (RADIO)
- */
-
-typedef struct { /*!< RADIO Structure */
- __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */
- __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */
- __O uint32_t TASKS_START; /*!< Start radio. */
- __O uint32_t TASKS_STOP; /*!< Stop radio. */
- __O uint32_t TASKS_DISABLE; /*!< Disable radio. */
- __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */
- __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */
- __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */
- __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */
- __I uint32_t RESERVED0[55];
- __IO uint32_t EVENTS_READY; /*!< Ready event. */
- __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */
- __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */
- __IO uint32_t EVENTS_END; /*!< End event. */
- __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */
- __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */
- __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */
- __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI
- sample is ready for readout at the RSSISAMPLE register. */
- __I uint32_t RESERVED1[2];
- __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BCC register. */
- __I uint32_t RESERVED2[53];
- __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */
- __I uint32_t RESERVED3[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED4[61];
- __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
- __I uint32_t CD; /*!< Carrier detect. */
- __I uint32_t RXMATCH; /*!< Received address. */
- __I uint32_t RXCRC; /*!< Received CRC. */
- __I uint32_t DAI; /*!< Device address match index. */
- __I uint32_t RESERVED5[60];
- __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
- __IO uint32_t FREQUENCY; /*!< Frequency. */
- __IO uint32_t TXPOWER; /*!< Output power. */
- __IO uint32_t MODE; /*!< Data rate and modulation. */
- __IO uint32_t PCNF0; /*!< Packet configuration 0. */
- __IO uint32_t PCNF1; /*!< Packet configuration 1. */
- __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */
- __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */
- __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */
- __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */
- __IO uint32_t TXADDRESS; /*!< Transmit address select. */
- __IO uint32_t RXADDRESSES; /*!< Receive address select. */
- __IO uint32_t CRCCNF; /*!< CRC configuration. */
- __IO uint32_t CRCPOLY; /*!< CRC polynomial. */
- __IO uint32_t CRCINIT; /*!< CRC initial value. */
- __IO uint32_t TEST; /*!< Test features enable register. */
- __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
- __I uint32_t RSSISAMPLE; /*!< RSSI sample. */
- __I uint32_t RESERVED6;
- __I uint32_t STATE; /*!< Current radio state. */
- __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
- __I uint32_t RESERVED7[2];
- __IO uint32_t BCC; /*!< Bit counter compare. */
- __I uint32_t RESERVED8[39];
- __IO uint32_t DAB[8]; /*!< Device address base segment. */
- __IO uint32_t DAP[8]; /*!< Device address prefix. */
- __IO uint32_t DACNF; /*!< Device address match configuration. */
- __I uint32_t RESERVED9[56];
- __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
- __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
- __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
- __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
- __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
- __I uint32_t RESERVED10[561];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_RADIO_Type;
-
-
-/* ================================================================================ */
-/* ================ UART ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Universal Asynchronous Receiver/Transmitter. (UART)
- */
-
-typedef struct { /*!< UART Structure */
- __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */
- __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */
- __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */
- __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */
- __I uint32_t RESERVED0[3];
- __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */
- __I uint32_t RESERVED1[56];
- __IO uint32_t EVENTS_CTS; /*!< CTS activated. */
- __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */
- __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */
- __I uint32_t RESERVED2[4];
- __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */
- __I uint32_t RESERVED3;
- __IO uint32_t EVENTS_ERROR; /*!< Error detected. */
- __I uint32_t RESERVED4[7];
- __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */
- __I uint32_t RESERVED5[46];
- __IO uint32_t SHORTS; /*!< Shortcuts for UART. */
- __I uint32_t RESERVED6[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED7[93];
- __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */
- __I uint32_t RESERVED8[31];
- __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */
- __I uint32_t RESERVED9;
- __IO uint32_t PSELRTS; /*!< Pin select for RTS. */
- __IO uint32_t PSELTXD; /*!< Pin select for TXD. */
- __IO uint32_t PSELCTS; /*!< Pin select for CTS. */
- __IO uint32_t PSELRXD; /*!< Pin select for RXD. */
- __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced.
- Once read the character is consumed. If read when no character
- available, the UART will stop working. */
- __O uint32_t TXD; /*!< TXD register. */
- __I uint32_t RESERVED10;
- __IO uint32_t BAUDRATE; /*!< UART Baudrate. */
- __I uint32_t RESERVED11[17];
- __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */
- __I uint32_t RESERVED12[675];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_UART_Type;
-
-
-/* ================================================================================ */
-/* ================ SPI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SPI master 0. (SPI)
- */
-
-typedef struct { /*!< SPI Structure */
- __I uint32_t RESERVED0[66];
- __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */
- __I uint32_t RESERVED1[126];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED2[125];
- __IO uint32_t ENABLE; /*!< Enable SPI. */
- __I uint32_t RESERVED3;
- __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
- __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
- __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
- __I uint32_t RESERVED4;
- __I uint32_t RXD; /*!< RX data. */
- __IO uint32_t TXD; /*!< TX data. */
- __I uint32_t RESERVED5;
- __IO uint32_t FREQUENCY; /*!< SPI frequency */
- __I uint32_t RESERVED6[11];
- __IO uint32_t CONFIG; /*!< Configuration register. */
- __I uint32_t RESERVED7[681];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_SPI_Type;
-
-
-/* ================================================================================ */
-/* ================ TWI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Two-wire interface master 0. (TWI)
- */
-
-typedef struct { /*!< TWI Structure */
- __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */
- __I uint32_t RESERVED0;
- __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */
- __I uint32_t RESERVED1[2];
- __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */
- __I uint32_t RESERVED2;
- __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */
- __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */
- __I uint32_t RESERVED3[56];
- __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */
- __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */
- __I uint32_t RESERVED4[4];
- __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */
- __I uint32_t RESERVED5;
- __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */
- __I uint32_t RESERVED6[4];
- __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */
- __I uint32_t RESERVED7[3];
- __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */
- __I uint32_t RESERVED8[45];
- __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
- __I uint32_t RESERVED9[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED10[110];
- __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */
- __I uint32_t RESERVED11[14];
- __IO uint32_t ENABLE; /*!< Enable two-wire master. */
- __I uint32_t RESERVED12;
- __IO uint32_t PSELSCL; /*!< Pin select for SCL. */
- __IO uint32_t PSELSDA; /*!< Pin select for SDA. */
- __I uint32_t RESERVED13[2];
- __I uint32_t RXD; /*!< RX data register. */
- __IO uint32_t TXD; /*!< TX data register. */
- __I uint32_t RESERVED14;
- __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */
- __I uint32_t RESERVED15[24];
- __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */
- __I uint32_t RESERVED16[668];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_TWI_Type;
-
-
-/* ================================================================================ */
-/* ================ SPIS ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SPI slave 1. (SPIS)
- */
-
-typedef struct { /*!< SPIS Structure */
- __I uint32_t RESERVED0[9];
- __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */
- __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
- __I uint32_t RESERVED1[54];
- __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
- __I uint32_t RESERVED2[8];
- __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
- __I uint32_t RESERVED3[53];
- __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
- __I uint32_t RESERVED4[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED5[61];
- __I uint32_t SEMSTAT; /*!< Semaphore status. */
- __I uint32_t RESERVED6[15];
- __IO uint32_t STATUS; /*!< Status from last transaction. */
- __I uint32_t RESERVED7[47];
- __IO uint32_t ENABLE; /*!< Enable SPIS. */
- __I uint32_t RESERVED8;
- __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
- __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
- __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
- __IO uint32_t PSELCSN; /*!< Pin select for CSN. */
- __I uint32_t RESERVED9[7];
- __IO uint32_t RXDPTR; /*!< RX data pointer. */
- __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
- __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
- __I uint32_t RESERVED10;
- __IO uint32_t TXDPTR; /*!< TX data pointer. */
- __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
- __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
- __I uint32_t RESERVED11;
- __IO uint32_t CONFIG; /*!< Configuration register. */
- __I uint32_t RESERVED12;
- __IO uint32_t DEF; /*!< Default character. */
- __I uint32_t RESERVED13[24];
- __IO uint32_t ORC; /*!< Over-read character. */
- __I uint32_t RESERVED14[654];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_SPIS_Type;
-
-
-/* ================================================================================ */
-/* ================ SPIM ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SPI master with easyDMA 1. (SPIM)
- */
-
-typedef struct { /*!< SPIM Structure */
- __I uint32_t RESERVED0[4];
- __O uint32_t TASKS_START; /*!< Start SPI transaction. */
- __O uint32_t TASKS_STOP; /*!< Stop SPI transaction. */
- __I uint32_t RESERVED1;
- __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction. */
- __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction. */
- __I uint32_t RESERVED2[56];
- __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped. */
- __I uint32_t RESERVED3[2];
- __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached. */
- __I uint32_t RESERVED4;
- __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached. */
- __I uint32_t RESERVED5;
- __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached. */
- __I uint32_t RESERVED6[10];
- __IO uint32_t EVENTS_STARTED; /*!< Transaction started. */
- __I uint32_t RESERVED7[44];
- __IO uint32_t SHORTS; /*!< Shortcuts for SPIM. */
- __I uint32_t RESERVED8[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED9[125];
- __IO uint32_t ENABLE; /*!< Enable SPIM. */
- __I uint32_t RESERVED10;
- SPIM_PSEL_Type PSEL; /*!< Pin select configuration. */
- __I uint32_t RESERVED11[4];
- __IO uint32_t FREQUENCY; /*!< SPI frequency. */
- __I uint32_t RESERVED12[3];
- SPIM_RXD_Type RXD; /*!< RXD EasyDMA configuration and status. */
- __I uint32_t RESERVED13;
- SPIM_TXD_Type TXD; /*!< TXD EasyDMA configuration and status. */
- __I uint32_t RESERVED14;
- __IO uint32_t CONFIG; /*!< Configuration register. */
- __I uint32_t RESERVED15[26];
- __IO uint32_t ORC; /*!< Over-read character. */
- __I uint32_t RESERVED16[654];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_SPIM_Type;
-
-
-/* ================================================================================ */
-/* ================ GPIOTE ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief GPIO tasks and events. (GPIOTE)
- */
-
-typedef struct { /*!< GPIOTE Structure */
- __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */
- __I uint32_t RESERVED0[60];
- __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */
- __I uint32_t RESERVED1[27];
- __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */
- __I uint32_t RESERVED2[97];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[129];
- __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */
- __I uint32_t RESERVED4[695];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_GPIOTE_Type;
-
-
-/* ================================================================================ */
-/* ================ ADC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Analog to digital converter. (ADC)
- */
-
-typedef struct { /*!< ADC Structure */
- __O uint32_t TASKS_START; /*!< Start an ADC conversion. */
- __O uint32_t TASKS_STOP; /*!< Stop ADC. */
- __I uint32_t RESERVED0[62];
- __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */
- __I uint32_t RESERVED1[128];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED2[61];
- __I uint32_t BUSY; /*!< ADC busy register. */
- __I uint32_t RESERVED3[63];
- __IO uint32_t ENABLE; /*!< ADC enable. */
- __IO uint32_t CONFIG; /*!< ADC configuration register. */
- __I uint32_t RESULT; /*!< Result of ADC conversion. */
- __I uint32_t RESERVED4[700];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_ADC_Type;
-
-
-/* ================================================================================ */
-/* ================ TIMER ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Timer 0. (TIMER)
- */
-
-typedef struct { /*!< TIMER Structure */
- __O uint32_t TASKS_START; /*!< Start Timer. */
- __O uint32_t TASKS_STOP; /*!< Stop Timer. */
- __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */
- __O uint32_t TASKS_CLEAR; /*!< Clear timer. */
- __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */
- __I uint32_t RESERVED0[11];
- __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */
- __I uint32_t RESERVED1[60];
- __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
- __I uint32_t RESERVED2[44];
- __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */
- __I uint32_t RESERVED3[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED4[126];
- __IO uint32_t MODE; /*!< Timer Mode selection. */
- __IO uint32_t BITMODE; /*!< Sets timer behaviour. */
- __I uint32_t RESERVED5;
- __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source
- clock frequency is divided by 2^SCALE. */
- __I uint32_t RESERVED6[11];
- __IO uint32_t CC[4]; /*!< Capture/compare registers. */
- __I uint32_t RESERVED7[683];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_TIMER_Type;
-
-
-/* ================================================================================ */
-/* ================ RTC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Real time counter 0. (RTC)
- */
-
-typedef struct { /*!< RTC Structure */
- __O uint32_t TASKS_START; /*!< Start RTC Counter. */
- __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */
- __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */
- __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */
- __I uint32_t RESERVED0[60];
- __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */
- __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */
- __I uint32_t RESERVED1[14];
- __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
- __I uint32_t RESERVED2[109];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[13];
- __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */
- __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives
- the value of EVTEN. */
- __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register
- gives the value of EVTEN. */
- __I uint32_t RESERVED4[110];
- __I uint32_t COUNTER; /*!< Current COUNTER value. */
- __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).
- Must be written when RTC is STOPed. */
- __I uint32_t RESERVED5[13];
- __IO uint32_t CC[4]; /*!< Capture/compare registers. */
- __I uint32_t RESERVED6[683];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_RTC_Type;
-
-
-/* ================================================================================ */
-/* ================ TEMP ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Temperature Sensor. (TEMP)
- */
-
-typedef struct { /*!< TEMP Structure */
- __O uint32_t TASKS_START; /*!< Start temperature measurement. */
- __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */
- __I uint32_t RESERVED0[62];
- __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */
- __I uint32_t RESERVED1[128];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED2[127];
- __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */
- __I uint32_t RESERVED3[700];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_TEMP_Type;
-
-
-/* ================================================================================ */
-/* ================ RNG ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Random Number Generator. (RNG)
- */
-
-typedef struct { /*!< RNG Structure */
- __O uint32_t TASKS_START; /*!< Start the random number generator. */
- __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */
- __I uint32_t RESERVED0[62];
- __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */
- __I uint32_t RESERVED1[63];
- __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */
- __I uint32_t RESERVED2[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */
- __I uint32_t RESERVED3[126];
- __IO uint32_t CONFIG; /*!< Configuration register. */
- __I uint32_t VALUE; /*!< RNG random number. */
- __I uint32_t RESERVED4[700];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_RNG_Type;
-
-
-/* ================================================================================ */
-/* ================ ECB ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief AES ECB Mode Encryption. (ECB)
- */
-
-typedef struct { /*!< ECB Structure */
- __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this
- will not initiate a new encryption and the ERRORECB event will
- be triggered. */
- __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running,
- this will will trigger the ERRORECB event. */
- __I uint32_t RESERVED0[62];
- __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */
- __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an
- error. */
- __I uint32_t RESERVED1[127];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED2[126];
- __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */
- __I uint32_t RESERVED3[701];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_ECB_Type;
-
-
-/* ================================================================================ */
-/* ================ AAR ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Accelerated Address Resolver. (AAR)
- */
-
-typedef struct { /*!< AAR Structure */
- __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
- data structure. */
- __I uint32_t RESERVED0;
- __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */
- __I uint32_t RESERVED1[61];
- __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */
- __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */
- __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */
- __I uint32_t RESERVED2[126];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[61];
- __I uint32_t STATUS; /*!< Resolution status. */
- __I uint32_t RESERVED4[63];
- __IO uint32_t ENABLE; /*!< Enable AAR. */
- __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */
- __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
- __I uint32_t RESERVED5;
- __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
- __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
- during resolution. A minimum of 3 bytes must be reserved. */
- __I uint32_t RESERVED6[697];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_AAR_Type;
-
-
-/* ================================================================================ */
-/* ================ CCM ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief AES CCM Mode Encryption. (CCM)
- */
-
-typedef struct { /*!< CCM Structure */
- __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
- itself when completed. */
- __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when
- completed. */
- __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */
- __I uint32_t RESERVED0[61];
- __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */
- __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */
- __IO uint32_t EVENTS_ERROR; /*!< Error happened. */
- __I uint32_t RESERVED1[61];
- __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */
- __I uint32_t RESERVED2[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[61];
- __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */
- __I uint32_t RESERVED4[63];
- __IO uint32_t ENABLE; /*!< CCM enable. */
- __IO uint32_t MODE; /*!< Operation mode. */
- __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */
- __IO uint32_t INPTR; /*!< Pointer to the input packet. */
- __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */
- __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
- during resolution. A minimum of 43 bytes must be reserved. */
- __I uint32_t RESERVED5[697];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_CCM_Type;
-
-
-/* ================================================================================ */
-/* ================ WDT ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Watchdog Timer. (WDT)
- */
-
-typedef struct { /*!< WDT Structure */
- __O uint32_t TASKS_START; /*!< Start the watchdog. */
- __I uint32_t RESERVED0[63];
- __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */
- __I uint32_t RESERVED1[128];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED2[61];
- __I uint32_t RUNSTATUS; /*!< Watchdog running status. */
- __I uint32_t REQSTATUS; /*!< Request status. */
- __I uint32_t RESERVED3[63];
- __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */
- __IO uint32_t RREN; /*!< Reload request enable. */
- __IO uint32_t CONFIG; /*!< Configuration register. */
- __I uint32_t RESERVED4[60];
- __O uint32_t RR[8]; /*!< Reload requests registers. */
- __I uint32_t RESERVED5[631];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_WDT_Type;
-
-
-/* ================================================================================ */
-/* ================ QDEC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Rotary decoder. (QDEC)
- */
-
-typedef struct { /*!< QDEC Structure */
- __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */
- __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */
- __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers,
- and clears the ACC registers. */
- __I uint32_t RESERVED0[61];
- __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */
- __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and
- ACC register different than zero. */
- __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */
- __I uint32_t RESERVED1[61];
- __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */
- __I uint32_t RESERVED2[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[125];
- __IO uint32_t ENABLE; /*!< Enable the QDEC. */
- __IO uint32_t LEDPOL; /*!< LED output pin polarity. */
- __IO uint32_t SAMPLEPER; /*!< Sample period. */
- __I int32_t SAMPLE; /*!< Motion sample value. */
- __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */
- __I int32_t ACC; /*!< Accumulated valid transitions register. */
- __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC
- task. */
- __IO uint32_t PSELLED; /*!< Pin select for LED output. */
- __IO uint32_t PSELA; /*!< Pin select for phase A input. */
- __IO uint32_t PSELB; /*!< Pin select for phase B input. */
- __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */
- __I uint32_t RESERVED4[5];
- __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */
- __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */
- __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC
- task. */
- __I uint32_t RESERVED5[684];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_QDEC_Type;
-
-
-/* ================================================================================ */
-/* ================ LPCOMP ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Low power comparator. (LPCOMP)
- */
-
-typedef struct { /*!< LPCOMP Structure */
- __O uint32_t TASKS_START; /*!< Start the comparator. */
- __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
- __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
- __I uint32_t RESERVED0[61];
- __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */
- __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
- __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
- __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
- __I uint32_t RESERVED1[60];
- __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */
- __I uint32_t RESERVED2[64];
- __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
- __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED3[61];
- __I uint32_t RESULT; /*!< Result of last compare. */
- __I uint32_t RESERVED4[63];
- __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */
- __IO uint32_t PSEL; /*!< Input pin select. */
- __IO uint32_t REFSEL; /*!< Reference select. */
- __IO uint32_t EXTREFSEL; /*!< External reference select. */
- __I uint32_t RESERVED5[4];
- __IO uint32_t ANADETECT; /*!< Analog detect configuration. */
- __I uint32_t RESERVED6[694];
- __IO uint32_t POWER; /*!< Peripheral power control. */
-} NRF_LPCOMP_Type;
-
-
-/* ================================================================================ */
-/* ================ SWI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief SW Interrupts. (SWI)
- */
-
-typedef struct { /*!< SWI Structure */
- __I uint32_t UNUSED; /*!< Unused. */
-} NRF_SWI_Type;
-
-
-/* ================================================================================ */
-/* ================ NVMC ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Non Volatile Memory Controller. (NVMC)
- */
-
-typedef struct { /*!< NVMC Structure */
- __I uint32_t RESERVED0[256];
- __I uint32_t READY; /*!< Ready flag. */
- __I uint32_t RESERVED1[64];
- __IO uint32_t CONFIG; /*!< Configuration register. */
-
- union {
- __IO uint32_t ERASEPCR1; /*!< Register for erasing a non-protected non-volatile memory page. */
- __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
- };
- __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
-
- union {
- __IO uint32_t ERASEPCR0; /*!< Register for erasing a protected non-volatile memory page. */
- __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
- };
- __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
-} NRF_NVMC_Type;
-
-
-/* ================================================================================ */
-/* ================ PPI ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief PPI controller. (PPI)
- */
-
-typedef struct { /*!< PPI Structure */
- PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */
- __I uint32_t RESERVED0[312];
- __IO uint32_t CHEN; /*!< Channel enable. */
- __IO uint32_t CHENSET; /*!< Channel enable set. */
- __IO uint32_t CHENCLR; /*!< Channel enable clear. */
- __I uint32_t RESERVED1;
- PPI_CH_Type CH[16]; /*!< PPI Channel. */
- __I uint32_t RESERVED2[156];
- __IO uint32_t CHG[4]; /*!< Channel group configuration. */
-} NRF_PPI_Type;
-
-
-/* ================================================================================ */
-/* ================ FICR ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Factory Information Configuration. (FICR)
- */
-
-typedef struct { /*!< FICR Structure */
- __I uint32_t RESERVED0[4];
- __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */
- __I uint32_t CODESIZE; /*!< Code memory size in pages. */
- __I uint32_t RESERVED1[4];
- __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */
- __I uint32_t PPFC; /*!< Pre-programmed factory code present. */
- __I uint32_t RESERVED2;
- __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */
-
- union {
- __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is
- kept for backward compatinility purposes. Use SIZERAMBLOCKS
- instead. */
- __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */
- };
- __I uint32_t RESERVED3[5];
- __I uint32_t CONFIGID; /*!< Configuration identifier. */
- __I uint32_t DEVICEID[2]; /*!< Device identifier. */
- __I uint32_t RESERVED4[6];
- __I uint32_t ER[4]; /*!< Encryption root. */
- __I uint32_t IR[4]; /*!< Identity root. */
- __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */
- __I uint32_t DEVICEADDR[2]; /*!< Device address. */
- __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */
- __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit
- mode. */
- __I uint32_t RESERVED5[10];
- __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit
- mode. */
-} NRF_FICR_Type;
-
-
-/* ================================================================================ */
-/* ================ UICR ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief User Information Configuration. (UICR)
- */
-
-typedef struct { /*!< UICR Structure */
- __IO uint32_t CLENR0; /*!< Length of code region 0. */
- __IO uint32_t RBPCONF; /*!< Readback protection configuration. */
- __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */
- __I uint32_t RESERVED0;
- __I uint32_t FWID; /*!< Firmware ID. */
-
- union {
- __IO uint32_t NRFFW[15]; /*!< Reserved for Nordic firmware design. */
- __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */
- };
- __IO uint32_t NRFHW[12]; /*!< Reserved for Nordic hardware design. */
- __IO uint32_t CUSTOMER[32]; /*!< Reserved for customer. */
-} NRF_UICR_Type;
-
-
-/* ================================================================================ */
-/* ================ GPIO ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief General purpose input and output. (GPIO)
- */
-
-typedef struct { /*!< GPIO Structure */
- __I uint32_t RESERVED0[321];
- __IO uint32_t OUT; /*!< Write GPIO port. */
- __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */
- __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */
- __I uint32_t IN; /*!< Read GPIO port. */
- __IO uint32_t DIR; /*!< Direction of GPIO pins. */
- __IO uint32_t DIRSET; /*!< DIR set register. */
- __IO uint32_t DIRCLR; /*!< DIR clear register. */
- __I uint32_t RESERVED1[120];
- __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */
-} NRF_GPIO_Type;
-
-
-/* -------------------- End of section using anonymous unions ------------------- */
-#if defined(__CC_ARM)
- #pragma pop
-#elif defined(__ICCARM__)
- /* leave anonymous unions enabled */
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__TMS470__)
- /* anonymous unions are enabled by default */
-#elif defined(__TASKING__)
- #pragma warning restore
-#else
- #warning Not supported compiler type
-#endif
-
-
-
-
-/* ================================================================================ */
-/* ================ Peripheral memory map ================ */
-/* ================================================================================ */
-
-#define NRF_POWER_BASE 0x40000000UL
-#define NRF_CLOCK_BASE 0x40000000UL
-#define NRF_MPU_BASE 0x40000000UL
-#define NRF_PU_BASE 0x40000000UL
-#define NRF_AMLI_BASE 0x40000000UL
-#define NRF_RADIO_BASE 0x40001000UL
-#define NRF_UART0_BASE 0x40002000UL
-#define NRF_SPI0_BASE 0x40003000UL
-#define NRF_TWI0_BASE 0x40003000UL
-#define NRF_SPI1_BASE 0x40004000UL
-#define NRF_TWI1_BASE 0x40004000UL
-#define NRF_SPIS1_BASE 0x40004000UL
-#define NRF_SPIM1_BASE 0x40004000UL
-#define NRF_GPIOTE_BASE 0x40006000UL
-#define NRF_ADC_BASE 0x40007000UL
-#define NRF_TIMER0_BASE 0x40008000UL
-#define NRF_TIMER1_BASE 0x40009000UL
-#define NRF_TIMER2_BASE 0x4000A000UL
-#define NRF_RTC0_BASE 0x4000B000UL
-#define NRF_TEMP_BASE 0x4000C000UL
-#define NRF_RNG_BASE 0x4000D000UL
-#define NRF_ECB_BASE 0x4000E000UL
-#define NRF_AAR_BASE 0x4000F000UL
-#define NRF_CCM_BASE 0x4000F000UL
-#define NRF_WDT_BASE 0x40010000UL
-#define NRF_RTC1_BASE 0x40011000UL
-#define NRF_QDEC_BASE 0x40012000UL
-#define NRF_LPCOMP_BASE 0x40013000UL
-#define NRF_SWI_BASE 0x40014000UL
-#define NRF_NVMC_BASE 0x4001E000UL
-#define NRF_PPI_BASE 0x4001F000UL
-#define NRF_FICR_BASE 0x10000000UL
-#define NRF_UICR_BASE 0x10001000UL
-#define NRF_GPIO_BASE 0x50000000UL
-
-
-/* ================================================================================ */
-/* ================ Peripheral declaration ================ */
-/* ================================================================================ */
-
-#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
-#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
-#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
-#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
-#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
-#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
-#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
-#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
-#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
-#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
-#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
-#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
-#define NRF_SPIM1 ((NRF_SPIM_Type *) NRF_SPIM1_BASE)
-#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
-#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE)
-#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
-#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
-#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
-#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
-#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
-#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
-#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
-#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
-#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
-#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
-#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
-#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
-#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
-#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE)
-#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
-#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
-#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
-#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
-#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE)
-
-
-/** @} */ /* End of group Device_Peripheral_Registers */
-/** @} */ /* End of group nrf51 */
-/** @} */ /* End of group Nordic Semiconductor */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* nrf51_H */
-
diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h deleted file mode 100644 index 0ab4598..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h +++ /dev/null @@ -1,7088 +0,0 @@ -/* Copyright (c) 2015, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * * Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ -#ifndef __NRF51_BITS_H -#define __NRF51_BITS_H - -/*lint ++flb "Enter library region" */ - -/* Peripheral: AAR */ -/* Description: Accelerated Address Resolver. */ - -/* Register: AAR_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ -#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on RESOLVED event. */ -#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: AAR_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ -#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on RESOLVED event. */ -#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: AAR_STATUS */ -/* Description: Resolution status. */ - -/* Bits 3..0 : The IRK used last time an address was resolved. */ -#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ - -/* Register: AAR_ENABLE */ -/* Description: Enable AAR. */ - -/* Bits 1..0 : Enable AAR. */ -#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ -#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ - -/* Register: AAR_NIRK */ -/* Description: Number of Identity root Keys in the IRK data structure. */ - -/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ -#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ -#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ - -/* Register: AAR_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: ADC */ -/* Description: Analog to digital converter. */ - -/* Register: ADC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ADC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on END event. */ -#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ADC_BUSY */ -/* Description: ADC busy register. */ - -/* Bit 0 : ADC busy register. */ -#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ -#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ -#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ -#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ - -/* Register: ADC_ENABLE */ -/* Description: ADC enable. */ - -/* Bits 1..0 : ADC enable. */ -#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ -#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ - -/* Register: ADC_CONFIG */ -/* Description: ADC configuration register. */ - -/* Bits 17..16 : ADC external reference pin selection. */ -#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ - -/* Bits 15..8 : ADC analog pin selection. */ -#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ -#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ - -/* Bits 6..5 : ADC reference selection. */ -#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ -#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ -#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ -#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ -#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ - -/* Bits 4..2 : ADC input selection. */ -#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ -#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ -#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ - -/* Bits 1..0 : ADC resolution. */ -#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ -#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ -#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ -#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ -#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ - -/* Register: ADC_RESULT */ -/* Description: Result of ADC conversion. */ - -/* Bits 9..0 : Result of ADC conversion. */ -#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ - -/* Register: ADC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: AMLI */ -/* Description: AHB Multi-Layer Interface. */ - -/* Register: AMLI_RAMPRI_CPU0 */ -/* Description: Configurable priority configuration register for CPU0. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_SPIS1 */ -/* Description: Configurable priority configuration register for SPIS1. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_RADIO */ -/* Description: Configurable priority configuration register for RADIO. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_ECB */ -/* Description: Configurable priority configuration register for ECB. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_CCM */ -/* Description: Configurable priority configuration register for CCM. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_AAR */ -/* Description: Configurable priority configuration register for AAR. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - - -/* Peripheral: CCM */ -/* Description: AES CCM Mode Encryption. */ - -/* Register: CCM_SHORTS */ -/* Description: Shortcuts for the CCM. */ - -/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: CCM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ERROR event. */ -#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ENDCRYPT event. */ -#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDKSGEN event. */ -#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CCM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ERROR event. */ -#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ENDCRYPT event. */ -#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CCM_MICSTATUS */ -/* Description: CCM RX MIC check result. */ - -/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ -#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ -#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ - -/* Register: CCM_ENABLE */ -/* Description: CCM enable. */ - -/* Bits 1..0 : CCM enable. */ -#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ -#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ - -/* Register: CCM_MODE */ -/* Description: Operation mode. */ - -/* Bit 0 : CCM mode operation. */ -#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ -#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ - -/* Register: CCM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: CLOCK */ -/* Description: Clock control. */ - -/* Register: CLOCK_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 4 : Enable interrupt on CTTO event. */ -#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on DONE event. */ -#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CLOCK_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 4 : Disable interrupt on CTTO event. */ -#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on DONE event. */ -#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CLOCK_HFCLKRUN */ -/* Description: Task HFCLKSTART trigger status. */ - -/* Bit 0 : Task HFCLKSTART trigger status. */ -#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ -#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ - -/* Register: CLOCK_HFCLKSTAT */ -/* Description: High frequency clock status. */ - -/* Bit 16 : State for the HFCLK. */ -#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ -#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ - -/* Bit 0 : Active clock source for the HF clock. */ -#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ -#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ - -/* Register: CLOCK_LFCLKRUN */ -/* Description: Task LFCLKSTART triggered status. */ - -/* Bit 0 : Task LFCLKSTART triggered status. */ -#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ -#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ - -/* Register: CLOCK_LFCLKSTAT */ -/* Description: Low frequency clock status. */ - -/* Bit 16 : State for the LF clock. */ -#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ -#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ - -/* Bits 1..0 : Active clock source for the LF clock. */ -#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ - -/* Register: CLOCK_LFCLKSRCCOPY */ -/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ - -/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_LFCLKSRC */ -/* Description: Clock source for the LFCLK clock. */ - -/* Bits 1..0 : Clock source. */ -#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_CTIV */ -/* Description: Calibration timer interval. */ - -/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ -#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ -#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ - -/* Register: CLOCK_XTALFREQ */ -/* Description: Crystal frequency. */ - -/* Bits 7..0 : External Xtal frequency selection. */ -#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ -#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ - - -/* Peripheral: ECB */ -/* Description: AES ECB Mode Encryption. */ - -/* Register: ECB_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 1 : Enable interrupt on ERRORECB event. */ -#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDECB event. */ -#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ECB_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 1 : Disable interrupt on ERRORECB event. */ -#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDECB event. */ -#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ECB_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: FICR */ -/* Description: Factory Information Configuration. */ - -/* Register: FICR_PPFC */ -/* Description: Pre-programmed factory code present. */ - -/* Bits 7..0 : Pre-programmed factory code present. */ -#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ -#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ -#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ -#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ - -/* Register: FICR_CONFIGID */ -/* Description: Configuration identifier. */ - -/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ -#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ -#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ - -/* Bits 15..0 : Hardware Identification Number. */ -#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ -#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ - -/* Register: FICR_DEVICEADDRTYPE */ -/* Description: Device address type. */ - -/* Bit 0 : Device address type. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ - -/* Register: FICR_OVERRIDEEN */ -/* Description: Radio calibration override enable. */ - -/* Bit 3 : Override default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ - -/* Bit 0 : Override default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ - - -/* Peripheral: GPIO */ -/* Description: General purpose input and output. */ - -/* Register: GPIO_OUT */ -/* Description: Write GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ - -/* Register: GPIO_OUTSET */ -/* Description: Set individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ - -/* Register: GPIO_OUTCLR */ -/* Description: Clear individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ - -/* Register: GPIO_IN */ -/* Description: Read GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ - -/* Register: GPIO_DIR */ -/* Description: Direction of GPIO pins. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ - -/* Register: GPIO_DIRSET */ -/* Description: DIR set register. */ - -/* Bit 31 : Set as output pin 31. */ -#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ - -/* Bit 30 : Set as output pin 30. */ -#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ - -/* Bit 29 : Set as output pin 29. */ -#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ - -/* Bit 28 : Set as output pin 28. */ -#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ - -/* Bit 27 : Set as output pin 27. */ -#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ - -/* Bit 26 : Set as output pin 26. */ -#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ - -/* Bit 25 : Set as output pin 25. */ -#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ - -/* Bit 24 : Set as output pin 24. */ -#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ - -/* Bit 23 : Set as output pin 23. */ -#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ - -/* Bit 22 : Set as output pin 22. */ -#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ - -/* Bit 21 : Set as output pin 21. */ -#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ - -/* Bit 20 : Set as output pin 20. */ -#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ - -/* Bit 19 : Set as output pin 19. */ -#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ - -/* Bit 18 : Set as output pin 18. */ -#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ - -/* Bit 17 : Set as output pin 17. */ -#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ - -/* Bit 16 : Set as output pin 16. */ -#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ - -/* Bit 15 : Set as output pin 15. */ -#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ - -/* Bit 14 : Set as output pin 14. */ -#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ - -/* Bit 13 : Set as output pin 13. */ -#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ - -/* Bit 12 : Set as output pin 12. */ -#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ - -/* Bit 11 : Set as output pin 11. */ -#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ - -/* Bit 10 : Set as output pin 10. */ -#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ - -/* Bit 9 : Set as output pin 9. */ -#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ - -/* Bit 8 : Set as output pin 8. */ -#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ - -/* Bit 7 : Set as output pin 7. */ -#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ - -/* Bit 6 : Set as output pin 6. */ -#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ - -/* Bit 5 : Set as output pin 5. */ -#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ - -/* Bit 4 : Set as output pin 4. */ -#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ - -/* Bit 3 : Set as output pin 3. */ -#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ - -/* Bit 2 : Set as output pin 2. */ -#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ - -/* Bit 1 : Set as output pin 1. */ -#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ - -/* Bit 0 : Set as output pin 0. */ -#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ - -/* Register: GPIO_DIRCLR */ -/* Description: DIR clear register. */ - -/* Bit 31 : Set as input pin 31. */ -#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 30 : Set as input pin 30. */ -#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 29 : Set as input pin 29. */ -#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 28 : Set as input pin 28. */ -#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 27 : Set as input pin 27. */ -#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 26 : Set as input pin 26. */ -#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 25 : Set as input pin 25. */ -#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 24 : Set as input pin 24. */ -#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 23 : Set as input pin 23. */ -#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 22 : Set as input pin 22. */ -#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 21 : Set as input pin 21. */ -#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 20 : Set as input pin 20. */ -#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 19 : Set as input pin 19. */ -#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 18 : Set as input pin 18. */ -#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 17 : Set as input pin 17. */ -#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 16 : Set as input pin 16. */ -#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 15 : Set as input pin 15. */ -#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 14 : Set as input pin 14. */ -#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 13 : Set as input pin 13. */ -#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 12 : Set as input pin 12. */ -#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 11 : Set as input pin 11. */ -#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 10 : Set as input pin 10. */ -#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 9 : Set as input pin 9. */ -#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 8 : Set as input pin 8. */ -#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 7 : Set as input pin 7. */ -#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 6 : Set as input pin 6. */ -#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 5 : Set as input pin 5. */ -#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 4 : Set as input pin 4. */ -#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 3 : Set as input pin 3. */ -#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 2 : Set as input pin 2. */ -#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 1 : Set as input pin 1. */ -#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 0 : Set as input pin 0. */ -#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ - -/* Register: GPIO_PIN_CNF */ -/* Description: Configuration of GPIO pins. */ - -/* Bits 17..16 : Pin sensing mechanism. */ -#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ -#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ - -/* Bits 10..8 : Drive configuration. */ -#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ - -/* Bits 3..2 : Pull-up or -down configuration. */ -#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ -#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ -#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ -#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ -#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ - -/* Bit 1 : Connect or disconnect input path. */ -#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ -#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ - -/* Bit 0 : Pin direction. */ -#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ -#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ -#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ -#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ - - -/* Peripheral: GPIOTE */ -/* Description: GPIO tasks and events. */ - -/* Register: GPIOTE_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 31 : Enable interrupt on PORT event. */ -#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on IN[3] event. */ -#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on IN[2] event. */ -#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on IN[1] event. */ -#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on IN[0] event. */ -#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: GPIOTE_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 31 : Disable interrupt on PORT event. */ -#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on IN[3] event. */ -#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on IN[2] event. */ -#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on IN[1] event. */ -#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on IN[0] event. */ -#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: GPIOTE_CONFIG */ -/* Description: Channel configuration registers. */ - -/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ -#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ -#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ - -/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ -#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_None (0x00UL) /*!< No task or event. */ -#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ -#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ -#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ - -/* Bits 12..8 : Pin select. */ -#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ - -/* Bits 1..0 : Mode */ -#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ -#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ -#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ - -/* Register: GPIOTE_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: LPCOMP */ -/* Description: Low power comparator. */ - -/* Register: LPCOMP_SHORTS */ -/* Description: Shortcuts for the LPCOMP. */ - -/* Bit 4 : Shortcut between CROSS event and STOP task. */ -#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between UP event and STOP task. */ -#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DOWN event and STOP task. */ -#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between RADY event and STOP task. */ -#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and SAMPLE task. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: LPCOMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 3 : Enable interrupt on CROSS event. */ -#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on UP event. */ -#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on DOWN event. */ -#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: LPCOMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 3 : Disable interrupt on CROSS event. */ -#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on UP event. */ -#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on DOWN event. */ -#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: LPCOMP_RESULT */ -/* Description: Result of last compare. */ - -/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ -#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ -#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ - -/* Register: LPCOMP_ENABLE */ -/* Description: Enable the LPCOMP. */ - -/* Bits 1..0 : Enable or disable LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ - -/* Register: LPCOMP_PSEL */ -/* Description: Input pin select. */ - -/* Bits 2..0 : Analog input pin select. */ -#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ -#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ - -/* Register: LPCOMP_REFSEL */ -/* Description: Reference select. */ - -/* Bits 2..0 : Reference select. */ -#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ - -/* Register: LPCOMP_EXTREFSEL */ -/* Description: External reference select. */ - -/* Bit 0 : External analog reference pin selection. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ - -/* Register: LPCOMP_ANADETECT */ -/* Description: Analog detect configuration. */ - -/* Bits 1..0 : Analog detect configuration. */ -#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ -#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ -#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ - -/* Register: LPCOMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: MPU */ -/* Description: Memory Protection Unit. */ - -/* Register: MPU_PERR0 */ -/* Description: Configuration of peripherals in mpu regions. */ - -/* Bit 31 : PPI region configuration. */ -#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ -#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ -#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 30 : NVMC region configuration. */ -#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ -#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ -#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 19 : LPCOMP region configuration. */ -#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 18 : QDEC region configuration. */ -#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ -#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ -#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 17 : RTC1 region configuration. */ -#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ -#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ -#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 16 : WDT region configuration. */ -#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ -#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ -#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 15 : CCM and AAR region configuration. */ -#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 14 : ECB region configuration. */ -#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ -#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ -#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 13 : RNG region configuration. */ -#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ -#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ -#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 12 : TEMP region configuration. */ -#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ -#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ -#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 11 : RTC0 region configuration. */ -#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ -#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ -#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 10 : TIMER2 region configuration. */ -#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ -#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ -#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 9 : TIMER1 region configuration. */ -#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ -#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ -#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 8 : TIMER0 region configuration. */ -#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ -#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ -#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 7 : ADC region configuration. */ -#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ -#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ -#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 6 : GPIOTE region configuration. */ -#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 4 : SPI1 and TWI1 region configuration. */ -#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 3 : SPI0 and TWI0 region configuration. */ -#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 2 : UART0 region configuration. */ -#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ -#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ -#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 1 : RADIO region configuration. */ -#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ -#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ -#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 0 : POWER_CLOCK region configuration. */ -#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Register: MPU_PROTENSET0 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 31. */ -#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 30. */ -#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 29. */ -#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 28. */ -#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 27. */ -#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 26. */ -#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 25. */ -#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 24. */ -#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 23. */ -#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 22. */ -#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 21. */ -#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 20. */ -#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 19. */ -#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 18. */ -#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 17. */ -#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 16. */ -#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 15. */ -#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 14. */ -#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 13. */ -#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 12. */ -#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 11. */ -#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 10. */ -#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 9. */ -#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 8. */ -#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 7. */ -#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 6. */ -#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 5. */ -#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 4. */ -#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 3. */ -#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 2. */ -#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 1. */ -#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 0. */ -#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_PROTENSET1 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 63. */ -#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 62. */ -#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 61. */ -#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 60. */ -#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 59. */ -#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 58. */ -#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 57. */ -#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 56. */ -#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 55. */ -#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 54. */ -#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 53. */ -#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 52. */ -#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 51. */ -#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 50. */ -#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 49. */ -#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 48. */ -#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 47. */ -#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 46. */ -#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 45. */ -#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 44. */ -#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 43. */ -#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 42. */ -#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 41. */ -#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 40. */ -#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 39. */ -#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 38. */ -#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 37. */ -#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 36. */ -#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 35. */ -#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 34. */ -#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 33. */ -#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 32. */ -#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_DISABLEINDEBUG */ -/* Description: Disable erase and write protection mechanism in debug mode. */ - -/* Bit 0 : Disable protection mechanism in debug mode. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ - -/* Register: MPU_PROTBLOCKSIZE */ -/* Description: Erase and write protection block size. */ - -/* Bits 1..0 : Erase and write protection block size. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */ - - -/* Peripheral: NVMC */ -/* Description: Non Volatile Memory Controller. */ - -/* Register: NVMC_READY */ -/* Description: Ready flag. */ - -/* Bit 0 : NVMC ready. */ -#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ -#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ -#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ -#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ - -/* Register: NVMC_CONFIG */ -/* Description: Configuration register. */ - -/* Bits 1..0 : Program write enable. */ -#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ -#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ -#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ -#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ -#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ - -/* Register: NVMC_ERASEALL */ -/* Description: Register for erasing all non-volatile user memory. */ - -/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ -#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ - -/* Register: NVMC_ERASEUICR */ -/* Description: Register for start erasing User Information Congfiguration Registers. */ - -/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ -#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ - - -/* Peripheral: POWER */ -/* Description: Power Control. */ - -/* Register: POWER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on POFWARN event. */ -#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: POWER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on POFWARN event. */ -#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: POWER_RESETREAS */ -/* Description: Reset reason. */ - -/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ -#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ -#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ -#define POWER_RESETREAS_DIF_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_DIF_Detected (1UL) /*!< Reset detected. */ - -/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ -#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_LPCOMP_Detected (1UL) /*!< Reset detected. */ - -/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ -#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ -#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ -#define POWER_RESETREAS_OFF_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_OFF_Detected (1UL) /*!< Reset detected. */ - -/* Bit 3 : Reset from CPU lock-up detected. */ -#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_LOCKUP_Detected (1UL) /*!< Reset detected. */ - -/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ -#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ -#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ -#define POWER_RESETREAS_SREQ_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_SREQ_Detected (1UL) /*!< Reset detected. */ - -/* Bit 1 : Reset from watchdog detected. */ -#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ -#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ -#define POWER_RESETREAS_DOG_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_DOG_Detected (1UL) /*!< Reset detected. */ - -/* Bit 0 : Reset from pin-reset detected. */ -#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_RESETPIN_Detected (1UL) /*!< Reset detected. */ - -/* Register: POWER_RAMSTATUS */ -/* Description: Ram status register. */ - -/* Bit 3 : RAM block 3 status. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */ - -/* Bit 2 : RAM block 2 status. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */ - -/* Bit 1 : RAM block 1 status. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */ - -/* Bit 0 : RAM block 0 status. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */ - -/* Register: POWER_SYSTEMOFF */ -/* Description: System off register. */ - -/* Bit 0 : Enter system off mode. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ - -/* Register: POWER_POFCON */ -/* Description: Power failure configuration. */ - -/* Bits 2..1 : Set threshold level. */ -#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ -#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ -#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ -#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ - -/* Bit 0 : Power failure comparator enable. */ -#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ -#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ -#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ -#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ - -/* Register: POWER_GPREGRET */ -/* Description: General purpose retention register. This register is a retained register. */ - -/* Bits 7..0 : General purpose retention register. */ -#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ -#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ - -/* Register: POWER_RAMON */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 1 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ - -/* Bit 16 : RAM block 0 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ - -/* Bit 1 : RAM block 1 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ -#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ - -/* Bit 0 : RAM block 0 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ -#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ - -/* Register: POWER_RESET */ -/* Description: Pin reset functionality configuration register. This register is a retained register. */ - -/* Bit 0 : Enable or disable pin reset in debug interface mode. */ -#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ -#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ -#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ -#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ - -/* Register: POWER_RAMONB */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 3 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ - -/* Bit 16 : RAM block 2 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ - -/* Bit 1 : RAM block 3 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ - -/* Bit 0 : RAM block 2 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ - -/* Register: POWER_DCDCEN */ -/* Description: DCDC converter enable configuration register. */ - -/* Bit 0 : Enable DCDC converter. */ -#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ -#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ - -/* Register: POWER_DCDCFORCE */ -/* Description: DCDC power-up force register. */ - -/* Bit 1 : DCDC power-up force on. */ -#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */ - -/* Bit 0 : DCDC power-up force off. */ -#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */ - - -/* Peripheral: PPI */ -/* Description: PPI controller. */ - -/* Register: PPI_CHEN */ -/* Description: Channel enable. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ -#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ - -/* Register: PPI_CHENSET */ -/* Description: Channel enable set. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ - -/* Register: PPI_CHENCLR */ -/* Description: Channel enable clear. */ - -/* Bit 31 : Disable PPI channel 31. */ -#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 30 : Disable PPI channel 30. */ -#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 29 : Disable PPI channel 29. */ -#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 28 : Disable PPI channel 28. */ -#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 27 : Disable PPI channel 27. */ -#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 26 : Disable PPI channel 26. */ -#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 25 : Disable PPI channel 25. */ -#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 24 : Disable PPI channel 24. */ -#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 23 : Disable PPI channel 23. */ -#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 22 : Disable PPI channel 22. */ -#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 21 : Disable PPI channel 21. */ -#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 20 : Disable PPI channel 20. */ -#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 15 : Disable PPI channel 15. */ -#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 14 : Disable PPI channel 14. */ -#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 13 : Disable PPI channel 13. */ -#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 12 : Disable PPI channel 12. */ -#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 11 : Disable PPI channel 11. */ -#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 10 : Disable PPI channel 10. */ -#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 9 : Disable PPI channel 9. */ -#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 8 : Disable PPI channel 8. */ -#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 7 : Disable PPI channel 7. */ -#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 6 : Disable PPI channel 6. */ -#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 5 : Disable PPI channel 5. */ -#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 4 : Disable PPI channel 4. */ -#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 3 : Disable PPI channel 3. */ -#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 2 : Disable PPI channel 2. */ -#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 1 : Disable PPI channel 1. */ -#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 0 : Disable PPI channel 0. */ -#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ - -/* Register: PPI_CHG */ -/* Description: Channel group configuration. */ - -/* Bit 31 : Include CH31 in channel group. */ -#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ - -/* Bit 30 : Include CH30 in channel group. */ -#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ - -/* Bit 29 : Include CH29 in channel group. */ -#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ - -/* Bit 28 : Include CH28 in channel group. */ -#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ - -/* Bit 27 : Include CH27 in channel group. */ -#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ - -/* Bit 26 : Include CH26 in channel group. */ -#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ - -/* Bit 25 : Include CH25 in channel group. */ -#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ - -/* Bit 24 : Include CH24 in channel group. */ -#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ - -/* Bit 23 : Include CH23 in channel group. */ -#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ - -/* Bit 22 : Include CH22 in channel group. */ -#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ - -/* Bit 21 : Include CH21 in channel group. */ -#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ - -/* Bit 20 : Include CH20 in channel group. */ -#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ - -/* Bit 15 : Include CH15 in channel group. */ -#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ - -/* Bit 14 : Include CH14 in channel group. */ -#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ - -/* Bit 13 : Include CH13 in channel group. */ -#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ - -/* Bit 12 : Include CH12 in channel group. */ -#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ - -/* Bit 11 : Include CH11 in channel group. */ -#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ - -/* Bit 10 : Include CH10 in channel group. */ -#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ - -/* Bit 9 : Include CH9 in channel group. */ -#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ - -/* Bit 8 : Include CH8 in channel group. */ -#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ - -/* Bit 7 : Include CH7 in channel group. */ -#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ - -/* Bit 6 : Include CH6 in channel group. */ -#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ - -/* Bit 5 : Include CH5 in channel group. */ -#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ - -/* Bit 4 : Include CH4 in channel group. */ -#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ - -/* Bit 3 : Include CH3 in channel group. */ -#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ - -/* Bit 2 : Include CH2 in channel group. */ -#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ - -/* Bit 1 : Include CH1 in channel group. */ -#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ - -/* Bit 0 : Include CH0 in channel group. */ -#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ - - -/* Peripheral: PU */ -/* Description: Patch unit. */ - -/* Register: PU_PATCHADDR */ -/* Description: Relative address of patch instructions. */ - -/* Bits 24..0 : Relative address of patch instructions. */ -#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ -#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ - -/* Register: PU_PATCHEN */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ - -/* Register: PU_PATCHENSET */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ - -/* Register: PU_PATCHENCLR */ -/* Description: Patch disable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ - - -/* Peripheral: QDEC */ -/* Description: Rotary decoder. */ - -/* Register: QDEC_SHORTS */ -/* Description: Shortcuts for the QDEC. */ - -/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: QDEC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ACCOF event. */ -#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on REPORTRDY event. */ -#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on SAMPLERDY event. */ -#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: QDEC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ACCOF event. */ -#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on REPORTRDY event. */ -#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on SAMPLERDY event. */ -#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: QDEC_ENABLE */ -/* Description: Enable the QDEC. */ - -/* Bit 0 : Enable or disable QDEC. */ -#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ -#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ - -/* Register: QDEC_LEDPOL */ -/* Description: LED output pin polarity. */ - -/* Bit 0 : LED output pin polarity. */ -#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ -#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ - -/* Register: QDEC_SAMPLEPER */ -/* Description: Sample period. */ - -/* Bits 2..0 : Sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ - -/* Register: QDEC_SAMPLE */ -/* Description: Motion sample value. */ - -/* Bits 31..0 : Last sample taken in compliment to 2. */ -#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ -#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ - -/* Register: QDEC_REPORTPER */ -/* Description: Number of samples to generate an EVENT_REPORTRDY. */ - -/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ -#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ - -/* Register: QDEC_DBFEN */ -/* Description: Enable debouncer input filters. */ - -/* Bit 0 : Enable debounce input filters. */ -#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ -#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ - -/* Register: QDEC_LEDPRE */ -/* Description: Time LED is switched ON before the sample. */ - -/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */ -#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ -#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ - -/* Register: QDEC_ACCDBL */ -/* Description: Accumulated double (error) transitions register. */ - -/* Bits 3..0 : Accumulated double (error) transitions. */ -#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ -#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ - -/* Register: QDEC_ACCDBLREAD */ -/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ - -/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ - -/* Register: QDEC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RADIO */ -/* Description: The radio. */ - -/* Register: RADIO_SHORTS */ -/* Description: Shortcuts for the radio. */ - -/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 5 : Shortcut between END event and START task. */ -#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ -#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ -#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ -#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between END event and DISABLE task. */ -#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and START task. */ -#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ -#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ -#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RADIO_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on BCMATCH event. */ -#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on RSSIEND event. */ -#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on DEVMISS event. */ -#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 5 : Enable interrupt on DEVMATCH event. */ -#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on DISABLED event. */ -#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on END event. */ -#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on PAYLOAD event. */ -#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ADDRESS event. */ -#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RADIO_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on BCMATCH event. */ -#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on RSSIEND event. */ -#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on DEVMISS event. */ -#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 5 : Disable interrupt on DEVMATCH event. */ -#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on DISABLED event. */ -#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on END event. */ -#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on PAYLOAD event. */ -#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ADDRESS event. */ -#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RADIO_CRCSTATUS */ -/* Description: CRC status of received packet. */ - -/* Bit 0 : CRC status of received packet. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ - -/* Register: RADIO_CD */ -/* Description: Carrier detect. */ - -/* Bit 0 : Carrier detect. */ -#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */ -#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */ - -/* Register: RADIO_RXMATCH */ -/* Description: Received address. */ - -/* Bits 2..0 : Logical address in which previous packet was received. */ -#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ -#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ - -/* Register: RADIO_RXCRC */ -/* Description: Received CRC. */ - -/* Bits 23..0 : CRC field of previously received packet. */ -#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ -#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ - -/* Register: RADIO_DAI */ -/* Description: Device address match index. */ - -/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */ -#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ -#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ - -/* Register: RADIO_FREQUENCY */ -/* Description: Frequency. */ - -/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ -#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ - -/* Register: RADIO_TXPOWER */ -/* Description: Output power. */ - -/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ -#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ -#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ - -/* Register: RADIO_MODE */ -/* Description: Data rate and modulation. */ - -/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ -#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ - -/* Register: RADIO_PCNF0 */ -/* Description: Packet configuration 0. */ - -/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ -#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ - -/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ -#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ -#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ - -/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ -#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ - -/* Register: RADIO_PCNF1 */ -/* Description: Packet configuration 1. */ - -/* Bit 25 : Packet whitening enable. */ -#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ -#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ - -/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ -#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ -#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ - -/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ -#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ - -/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ -#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ - -/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ -#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ -#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ - -/* Register: RADIO_PREFIX0 */ -/* Description: Prefixes bytes for logical addresses 0 to 3. */ - -/* Bits 31..24 : Address prefix 3. Decision point: START task. */ -#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ -#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ - -/* Bits 23..16 : Address prefix 2. Decision point: START task. */ -#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ -#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ - -/* Bits 15..8 : Address prefix 1. Decision point: START task. */ -#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ -#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ - -/* Bits 7..0 : Address prefix 0. Decision point: START task. */ -#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ -#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ - -/* Register: RADIO_PREFIX1 */ -/* Description: Prefixes bytes for logical addresses 4 to 7. */ - -/* Bits 31..24 : Address prefix 7. Decision point: START task. */ -#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ -#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ - -/* Bits 23..16 : Address prefix 6. Decision point: START task. */ -#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ -#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ - -/* Bits 15..8 : Address prefix 5. Decision point: START task. */ -#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ -#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ - -/* Bits 7..0 : Address prefix 4. Decision point: START task. */ -#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ -#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ - -/* Register: RADIO_TXADDRESS */ -/* Description: Transmit address select. */ - -/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ -#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ -#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ - -/* Register: RADIO_RXADDRESSES */ -/* Description: Receive address select. */ - -/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ - -/* Register: RADIO_CRCCNF */ -/* Description: CRC configuration. */ - -/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ -#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ -#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ - -/* Bits 1..0 : CRC length. Decision point: START task. */ -#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ -#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ -#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ -#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ -#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ -#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ - -/* Register: RADIO_CRCPOLY */ -/* Description: CRC polynomial. */ - -/* Bits 23..0 : CRC polynomial. Decision point: START task. */ -#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */ -#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ - -/* Register: RADIO_CRCINIT */ -/* Description: CRC initial value. */ - -/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ -#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ -#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ - -/* Register: RADIO_TEST */ -/* Description: Test features enable register. */ - -/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ -#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */ -#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */ - -/* Bit 0 : Constant carrier. Decision point: TXEN task. */ -#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ -#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ - -/* Register: RADIO_TIFS */ -/* Description: Inter Frame Spacing in microseconds. */ - -/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ -#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ -#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ - -/* Register: RADIO_RSSISAMPLE */ -/* Description: RSSI sample. */ - -/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ - -/* Register: RADIO_STATE */ -/* Description: Current radio state. */ - -/* Bits 3..0 : Current radio state. */ -#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ -#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ -#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ -#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ -#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ -#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ -#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ -#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ -#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ -#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ -#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ - -/* Register: RADIO_DATAWHITEIV */ -/* Description: Data whitening initial value. */ - -/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ - -/* Register: RADIO_DAP */ -/* Description: Device address prefix. */ - -/* Bits 15..0 : Device address prefix. */ -#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ -#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ - -/* Register: RADIO_DACNF */ -/* Description: Device address match configuration. */ - -/* Bit 15 : TxAdd for device address 7. */ -#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ -#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ - -/* Bit 14 : TxAdd for device address 6. */ -#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ -#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ - -/* Bit 13 : TxAdd for device address 5. */ -#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ -#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ - -/* Bit 12 : TxAdd for device address 4. */ -#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ -#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ - -/* Bit 11 : TxAdd for device address 3. */ -#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ -#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ - -/* Bit 10 : TxAdd for device address 2. */ -#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ -#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ - -/* Bit 9 : TxAdd for device address 1. */ -#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ -#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ - -/* Bit 8 : TxAdd for device address 0. */ -#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ -#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ - -/* Bit 7 : Enable or disable device address matching using device address 7. */ -#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ -#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ -#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ - -/* Bit 6 : Enable or disable device address matching using device address 6. */ -#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ -#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ -#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ - -/* Bit 5 : Enable or disable device address matching using device address 5. */ -#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ -#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ -#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ - -/* Bit 4 : Enable or disable device address matching using device address 4. */ -#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ -#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ -#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ - -/* Bit 3 : Enable or disable device address matching using device address 3. */ -#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ -#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ -#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ - -/* Bit 2 : Enable or disable device address matching using device address 2. */ -#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ -#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ -#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ - -/* Bit 1 : Enable or disable device address matching using device address 1. */ -#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ -#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ -#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ - -/* Bit 0 : Enable or disable device address matching using device address 0. */ -#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ -#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ -#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ - -/* Register: RADIO_OVERRIDE0 */ -/* Description: Trim value override register 0. */ - -/* Bits 31..0 : Trim value override 0. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ - -/* Register: RADIO_OVERRIDE1 */ -/* Description: Trim value override register 1. */ - -/* Bits 31..0 : Trim value override 1. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ - -/* Register: RADIO_OVERRIDE2 */ -/* Description: Trim value override register 2. */ - -/* Bits 31..0 : Trim value override 2. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ - -/* Register: RADIO_OVERRIDE3 */ -/* Description: Trim value override register 3. */ - -/* Bits 31..0 : Trim value override 3. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ - -/* Register: RADIO_OVERRIDE4 */ -/* Description: Trim value override register 4. */ - -/* Bit 31 : Enable or disable override of default trim values. */ -#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ -#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ - -/* Bits 27..0 : Trim value override 4. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ - -/* Register: RADIO_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RNG */ -/* Description: Random Number Generator. */ - -/* Register: RNG_SHORTS */ -/* Description: Shortcuts for the RNG. */ - -/* Bit 0 : Shortcut between VALRDY event and STOP task. */ -#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RNG_INTENSET */ -/* Description: Interrupt enable set register */ - -/* Bit 0 : Enable interrupt on VALRDY event. */ -#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RNG_INTENCLR */ -/* Description: Interrupt enable clear register */ - -/* Bit 0 : Disable interrupt on VALRDY event. */ -#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RNG_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 0 : Digital error correction enable. */ -#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ -#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ - -/* Register: RNG_VALUE */ -/* Description: RNG random number. */ - -/* Bits 7..0 : Generated random number. */ -#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ -#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ - -/* Register: RNG_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RTC */ -/* Description: Real time counter 0. */ - -/* Register: RTC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] event. */ -#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] event. */ -#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] event. */ -#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] event. */ -#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on OVRFLW event. */ -#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on TICK event. */ -#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RTC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] event. */ -#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] event. */ -#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] event. */ -#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] event. */ -#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on OVRFLW event. */ -#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on TICK event. */ -#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RTC_EVTEN */ -/* Description: Configures event enable routing to PPI for each RTC event. */ - -/* Bit 19 : COMPARE[3] event enable. */ -#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 18 : COMPARE[2] event enable. */ -#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 17 : COMPARE[1] event enable. */ -#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 16 : COMPARE[0] event enable. */ -#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 1 : OVRFLW event enable. */ -#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 0 : TICK event enable. */ -#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ - -/* Register: RTC_EVTENSET */ -/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ - -/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ - -/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ - -/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ - -/* Bit 1 : Enable routing to PPI of OVRFLW event. */ -#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ - -/* Bit 0 : Enable routing to PPI of TICK event. */ -#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ - -/* Register: RTC_EVTENCLR */ -/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 1 : Disable routing to PPI of OVRFLW event. */ -#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 0 : Disable routing to PPI of TICK event. */ -#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ - -/* Register: RTC_COUNTER */ -/* Description: Current COUNTER value. */ - -/* Bits 23..0 : Counter value. */ -#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ -#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ - -/* Register: RTC_PRESCALER */ -/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ - -/* Bits 11..0 : RTC PRESCALER value. */ -#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: RTC_CC */ -/* Description: Capture/compare registers. */ - -/* Bits 23..0 : Compare value. */ -#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ -#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ - -/* Register: RTC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPI */ -/* Description: SPI master 0. */ - -/* Register: SPI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on READY event. */ -#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPI_ENABLE */ -/* Description: Enable SPI. */ - -/* Bits 2..0 : Enable or disable SPI. */ -#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ -#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ - -/* Register: SPI_RXD */ -/* Description: RX data. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: SPI_TXD */ -/* Description: TX data. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: SPI_FREQUENCY */ -/* Description: SPI frequency */ - -/* Bits 31..0 : SPI data rate. */ -#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ -#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ - -/* Register: SPI_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIM */ -/* Description: SPI master with easyDMA 1. */ - -/* Register: SPIM_SHORTS */ -/* Description: Shortcuts for SPIM. */ - -/* Bit 17 : Shortcut between END event and START task. */ -#define SPIM_SHORTS_END_START_Pos (17UL) /*!< Position of END_START field. */ -#define SPIM_SHORTS_END_START_Msk (0x1UL << SPIM_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define SPIM_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIM_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on STARTED event. */ -#define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */ -#define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */ -#define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 8 : Enable interrupt on ENDTX event. */ -#define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ -#define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ -#define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on END event. */ -#define SPIM_INTENSET_END_Pos (6UL) /*!< Position of END field. */ -#define SPIM_INTENSET_END_Msk (0x1UL << SPIM_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIM_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on ENDRX event. */ -#define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ -#define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ -#define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on STARTED event. */ -#define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */ -#define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */ -#define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 8 : Disable interrupt on ENDTX event. */ -#define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ -#define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ -#define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on END event. */ -#define SPIM_INTENCLR_END_Pos (6UL) /*!< Position of END field. */ -#define SPIM_INTENCLR_END_Msk (0x1UL << SPIM_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIM_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on ENDRX event. */ -#define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ -#define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ -#define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIM_ENABLE */ -/* Description: Enable SPIM. */ - -/* Bits 3..0 : Enable or disable SPIM. */ -#define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIM_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIM. */ -#define SPIM_ENABLE_ENABLE_Enabled (0x07UL) /*!< Enable SPIM. */ - -/* Register: SPIM_FREQUENCY */ -/* Description: SPI frequency. */ - -/* Bits 31..0 : SPI master data rate. */ -#define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps. */ - -/* Register: SPIM_RXD_PTR */ -/* Description: Data pointer. */ - -/* Bits 31..0 : Data pointer. */ -#define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ -#define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ - -/* Register: SPIM_RXD_MAXCNT */ -/* Description: Maximum number of buffer bytes to receive. */ - -/* Bits 7..0 : Maximum number of buffer bytes to receive. */ -#define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ -#define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ - -/* Register: SPIM_RXD_AMOUNT */ -/* Description: Number of bytes received in the last transaction. */ - -/* Bits 7..0 : Number of bytes received in the last transaction. */ -#define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ -#define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ - -/* Register: SPIM_TXD_PTR */ -/* Description: Data pointer. */ - -/* Bits 31..0 : Data pointer. */ -#define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ -#define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ - -/* Register: SPIM_TXD_MAXCNT */ -/* Description: Maximum number of buffer bytes to send. */ - -/* Bits 7..0 : Maximum number of buffer bytes to send. */ -#define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ -#define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ - -/* Register: SPIM_TXD_AMOUNT */ -/* Description: Number of bytes sent in the last transaction. */ - -/* Bits 7..0 : Number of bytes sent in the last transaction. */ -#define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ -#define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ - -/* Register: SPIM_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIM_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIM_POWER_POWER_Msk (0x1UL << SPIM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIS */ -/* Description: SPI slave 1. */ - -/* Register: SPIS_SHORTS */ -/* Description: Shortcuts for SPIS. */ - -/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ -#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIS_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on ACQUIRED event. */ -#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on END event. */ -#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIS_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on ACQUIRED event. */ -#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on END event. */ -#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIS_SEMSTAT */ -/* Description: Semaphore status. */ - -/* Bits 1..0 : Semaphore status. */ -#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ -#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ -#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ -#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ - -/* Register: SPIS_STATUS */ -/* Description: Status from last transaction. */ - -/* Bit 1 : RX buffer overflow detected, and prevented. */ -#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ - -/* Bit 0 : TX buffer overread detected, and prevented. */ -#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ - -/* Register: SPIS_ENABLE */ -/* Description: Enable SPIS. */ - -/* Bits 2..0 : Enable or disable SPIS. */ -#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ -#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ - -/* Register: SPIS_MAXRX */ -/* Description: Maximum number of bytes in the receive buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ -#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ -#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ - -/* Register: SPIS_AMOUNTRX */ -/* Description: Number of bytes received in last granted transaction. */ - -/* Bits 7..0 : Number of bytes received in last granted transaction. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ - -/* Register: SPIS_MAXTX */ -/* Description: Maximum number of bytes in the transmit buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ -#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ -#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ - -/* Register: SPIS_AMOUNTTX */ -/* Description: Number of bytes transmitted in last granted transaction. */ - -/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ - -/* Register: SPIS_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIS_DEF */ -/* Description: Default character. */ - -/* Bits 7..0 : Default character. */ -#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ -#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ - -/* Register: SPIS_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIS_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TEMP */ -/* Description: Temperature Sensor. */ - -/* Register: TEMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on DATARDY event. */ -#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TEMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on DATARDY event. */ -#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TEMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TIMER */ -/* Description: Timer 0. */ - -/* Register: TIMER_SHORTS */ -/* Description: Shortcuts for Timer. */ - -/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TIMER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] */ -#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] */ -#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] */ -#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] */ -#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TIMER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] */ -#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] */ -#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] */ -#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] */ -#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TIMER_MODE */ -/* Description: Timer Mode selection. */ - -/* Bit 0 : Select Normal or Counter mode. */ -#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ -#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ - -/* Register: TIMER_BITMODE */ -/* Description: Sets timer behaviour. */ - -/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ -#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ - -/* Register: TIMER_PRESCALER */ -/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ - -/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ -#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: TIMER_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TWI */ -/* Description: Two-wire interface master 0. */ - -/* Register: TWI_SHORTS */ -/* Description: Shortcuts for TWI. */ - -/* Bit 1 : Shortcut between BB event and the STOP task. */ -#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ -#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TWI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 18 : Enable interrupt on SUSPENDED event. */ -#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 14 : Enable interrupt on BB event. */ -#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXDSENT event. */ -#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TWI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 18 : Disable interrupt on SUSPENDED event. */ -#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 14 : Disable interrupt on BB event. */ -#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXDSENT event. */ -#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXDREADY event. */ -#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TWI_ERRORSRC */ -/* Description: Two-wire error source. Write error field to 1 to clear error. */ - -/* Bit 2 : NACK received after sending a data byte. */ -#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ -#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ -#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : NACK received after sending the address. */ -#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ -#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ -#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : Byte received in RXD register before read of the last received byte (data loss). */ -#define TWI_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define TWI_ERRORSRC_OVERRUN_Msk (0x1UL << TWI_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define TWI_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: TWI_ENABLE */ -/* Description: Enable two-wire master. */ - -/* Bits 2..0 : Enable or disable W2M */ -#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ -#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ - -/* Register: TWI_RXD */ -/* Description: RX data register. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: TWI_TXD */ -/* Description: TX data register. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: TWI_FREQUENCY */ -/* Description: Two-wire frequency. */ - -/* Bits 31..0 : Two-wire master clock frequency. */ -#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ - -/* Register: TWI_ADDRESS */ -/* Description: Address used in the two-wire transfer. */ - -/* Bits 6..0 : Two-wire address. */ -#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ -#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ - -/* Register: TWI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UART */ -/* Description: Universal Asynchronous Receiver/Transmitter. */ - -/* Register: UART_SHORTS */ -/* Description: Shortcuts for UART. */ - -/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ -#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ -#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: UART_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 17 : Enable interrupt on RXTO event. */ -#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXRDY event. */ -#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on RXRDY event. */ -#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on NCTS event. */ -#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on CTS event. */ -#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: UART_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 17 : Disable interrupt on RXTO event. */ -#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXRDY event. */ -#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXRDY event. */ -#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on NCTS event. */ -#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on CTS event. */ -#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: UART_ERRORSRC */ -/* Description: Error source. Write error field to 1 to clear error. */ - -/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ -#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ -#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ -#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ -#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ -#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ -#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: UART_ENABLE */ -/* Description: Enable UART and acquire IOs. */ - -/* Bits 2..0 : Enable or disable UART and acquire IOs. */ -#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ -#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ - -/* Register: UART_RXD */ -/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working. */ - -/* Bits 7..0 : RX data from previous transfer. Double buffered. */ -#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: UART_TXD */ -/* Description: TXD register. */ - -/* Bits 7..0 : TX data for transfer. */ -#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: UART_BAUDRATE */ -/* Description: UART Baudrate. */ - -/* Bits 31..0 : UART baudrate. */ -#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBED000UL) /*!< 921600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ - -/* Register: UART_CONFIG */ -/* Description: Configuration of parity and hardware flow control register. */ - -/* Bits 3..1 : Include parity bit. */ -#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ -#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ - -/* Bit 0 : Hardware flow control. */ -#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ -#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ -#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ -#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ - -/* Register: UART_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UICR */ -/* Description: User Information Configuration. */ - -/* Register: UICR_RBPCONF */ -/* Description: Readback protection configuration. */ - -/* Bits 15..8 : Readback protect all code in the device. */ -#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ -#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ -#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ -#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ - -/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ -#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ -#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ -#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ -#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ - -/* Register: UICR_XTALFREQ */ -/* Description: Reset value for CLOCK XTALFREQ register. */ - -/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ -#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ -#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ - -/* Register: UICR_FWID */ -/* Description: Firmware ID. */ - -/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ -#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ -#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ - - -/* Peripheral: WDT */ -/* Description: Watchdog Timer. */ - -/* Register: WDT_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on TIMEOUT event. */ -#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: WDT_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on TIMEOUT event. */ -#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: WDT_RUNSTATUS */ -/* Description: Watchdog running status. */ - -/* Bit 0 : Watchdog running status. */ -#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ -#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ - -/* Register: WDT_REQSTATUS */ -/* Description: Request status. */ - -/* Bit 7 : Request status for RR[7]. */ -#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ - -/* Bit 6 : Request status for RR[6]. */ -#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ - -/* Bit 5 : Request status for RR[5]. */ -#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ - -/* Bit 4 : Request status for RR[4]. */ -#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ - -/* Bit 3 : Request status for RR[3]. */ -#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ - -/* Bit 2 : Request status for RR[2]. */ -#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ - -/* Bit 1 : Request status for RR[1]. */ -#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ - -/* Bit 0 : Request status for RR[0]. */ -#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ - -/* Register: WDT_RREN */ -/* Description: Reload request enable. */ - -/* Bit 7 : Enable or disable RR[7] register. */ -#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ -#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ - -/* Bit 6 : Enable or disable RR[6] register. */ -#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ -#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ - -/* Bit 5 : Enable or disable RR[5] register. */ -#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ -#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ - -/* Bit 4 : Enable or disable RR[4] register. */ -#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ -#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ - -/* Bit 3 : Enable or disable RR[3] register. */ -#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ -#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ - -/* Bit 2 : Enable or disable RR[2] register. */ -#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ -#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ - -/* Bit 1 : Enable or disable RR[1] register. */ -#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ -#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ - -/* Bit 0 : Enable or disable RR[0] register. */ -#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ -#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ - -/* Register: WDT_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ -#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ -#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ - -/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ -#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ -#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ - -/* Register: WDT_RR */ -/* Description: Reload requests registers. */ - -/* Bits 31..0 : Reload register. */ -#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ -#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ -#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ - -/* Register: WDT_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/*lint --flb "Leave library region" */ -#endif diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h deleted file mode 100644 index 2a672db..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/nrf51_delay.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - Copyright (C) 2015 Stephen Caudle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file NRF51822/nrf51_delay.h - * @brief NRF51822 Delay routines - * - * @{ - */ - -#ifndef _NRF_DELAY_H -#define _NRF_DELAY_H - -inline static void nrf_delay_us(uint32_t volatile number_of_us) __attribute__((always_inline)); -inline static void nrf_delay_us(uint32_t volatile number_of_us) -{ -register uint32_t delay asm ("r0") = number_of_us; -__asm volatile ( -".syntax unified\n" - "1:\n" - " SUBS %0, %0, #1\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " NOP\n" - " BNE 1b\n" - ".syntax divided\n" - : "+r" (delay)); -} -#endif //__NRF_DELAY_H diff --git a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk b/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk deleted file mode 100644 index b937e39..0000000 --- a/ChibiOS_16.1.5/community/os/hal/ports/NRF51/NRF51822/platform.mk +++ /dev/null @@ -1,61 +0,0 @@ -ifeq ($(USE_SMART_BUILD),yes) -HALCONF := $(strip $(shell cat halconf.h halconf_community.h 2>/dev/null | egrep -e "define")) - -# List of all the NRF51x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_st_lld.c - -ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c -endif -ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c -endif -ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c -endif -ifneq ($(findstring HAL_USE_EXT TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c -endif -ifneq ($(findstring HAL_USE_I2C TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c -endif -ifneq ($(findstring HAL_USE_ADC TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c -endif -ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c -endif -ifneq ($(findstring HAL_USE_WDG TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c -endif -ifneq ($(findstring HAL_USE_RNG TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c -endif -ifneq ($(findstring HAL_USE_PWM TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c -endif -else -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c -endif - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822 - - |