tar'd chibi

3 files changed, 0 insertions, 216 deletions

diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c
deleted file mode 100644
index 0f34452..0000000
--- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*

-    ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "ch.h"

-#include "hal.h"

-

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-const PALConfig pal_default_config =

-{

-    .ports = {

-        {

-            /*

-             * PORTA setup.

-             *

-             * on pads: PTA1, PTA2, PTA5, PTA18, PTA19

-             *

-             * PTA0/3 SWD (default SWD, ALT_7: SWD, ALT_1: PTA0/3)

-             * PTA4 NMI button (default NMI_b, ALT_1: PTA4)

-             * PTA20 RESET button (default RESET, ALT_7: RESET, ALT_1: PTA20)

-             */

-            .port = IOPORT1,

-            .pads = {

-                PAL_MODE_ALTERNATIVE_7,     PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_ALTERNATIVE_7,     PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_INPUT_ANALOG,      PAL_MODE_INPUT_ANALOG,      PAL_MODE_ALTERNATIVE_7,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-            },

-        },

-        {

-            /*

-             * PORTB setup.

-             *

-             * on pads: PTB0, PTB1

-             * LED: PTB18

-             */

-            .port = IOPORT2,

-            .pads = {

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-            },

-        },

-        {

-            /*

-             * PORTC setup.

-             *

-             * on pads: PTC1, PTC2, PTC3, PTC6, PTC7, PTC8, PTC9

-             */

-            .port = IOPORT3,

-            .pads = {

-                PAL_MODE_UNCONNECTED,       PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-            },

-        },

-        {

-            /*

-             * PORTD setup.

-             *

-             * on pads: PTD0 - PTD7

-             */

-            .port = IOPORT4,

-            .pads = {

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-            },

-        },

-        {

-            /*

-             * PORTE setup.

-             *

-             * on pads: PTE0, PTE1, PTE24, PTE25, PTE29, PTE30

-             */

-            .port = IOPORT5,

-            .pads = {

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_OUTPUT_PUSHPULL,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,

-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_INPUT_PULLUP,

-                PAL_MODE_INPUT_PULLUP,      PAL_MODE_UNCONNECTED,

-            },

-        },

-    },

-};

-#endif

-

-/**

- * @brief   Early initialization code.

- * @details This initialization must be performed just after stack setup

- *          and before any other initialization.

- */

-void __early_init(void) {

-

-  kl2x_clock_init();

-}

-

-/**

- * @brief   Board-specific initialization code.

- * @todo    Add your board-specific code, if any.

- */

-void boardInit(void) {

-}

diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h
deleted file mode 100644
index 1c61915..0000000
--- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*

-    ChibiOS - (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for a custom KL27Z breakout board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_KL27Z_BREAKOUT

-#define BOARD_NAME                  "Custom KL27Z breakout"

-

-/*

- * MCU type

- */

-#define KL27Zxxx

-

-/*

- * Onboard features.

- */

-#define GPIO_LED    IOPORT2

-#define PIN_LED     18

-#define GPIO_BUTTON IOPORT1

-#define PIN_BUTTON  4

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */

diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk
deleted file mode 100644
index 14102c4..0000000
--- a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.

-BOARDSRC = ./board/board.c

-

-# Required include directories

-BOARDINC = ./board