diff options
Diffstat (limited to 'ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h')
| -rw-r--r-- | ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h | 129 |
1 files changed, 0 insertions, 129 deletions
diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h deleted file mode 100644 index 97103d3..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h +++ /dev/null @@ -1,129 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the EXP430FR5969 LaunchPad board
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_EXP430FR5959
-#define BOARD_NAME "MSP430FR5969 LaunchPad"
-
-/*
- * IO lines assignments.
- */
-#define LINE_LED_G PAL_LINE(IOPORT1, 0U)
-#define LINE_LED_R PAL_LINE(IOPORT2, 14U)
-#define LINE_SW_S1 PAL_LINE(IOPORT2, 13U)
-#define LINE_SW_S2 PAL_LINE(IOPORT1, 1U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the MSP430X Family Users Guide for details.
- */
-/*
- * Port A setup:
- *
- * P1.0 - Green LED (output low)
- * P1.1 - Switch S2 (input pullup)
- * P1.2 - BoosterPack BP19 (input pullup)
- * P1.3 - BoosterPack BP11 (input pullup)
- * P1.4 - BoosterPack BP12 (input pullup)
- * P1.5 - BoosterPack BP13 (input pullup)
- * P1.6 - BoosterPack BP15 (input pullup)
- * P1.7 - BoosterPack BP14 (input pullup)
- * P2.0 - Application UART TX (alternate 2)
- * P2.1 - Application UART RX (alternate 2)
- * P2.2 - BoosterPack BP7 (input pullup)
- * P2.3 - N/C (input pullup)
- * P2.4 - BoosterPack BP6 (input pullup)
- * P2.5 - BoosterPack BP4 (input pullup)
- * P2.6 - BoosterPack BP3 (input pullup)
- * P2.7 - N/C (input pullup)
- */
-#define VAL_IOPORT1_OUT 0xFCFE
-#define VAL_IOPORT1_DIR 0x0001
-#define VAL_IOPORT1_REN 0xFCFE
-#define VAL_IOPORT1_SEL0 0x0000
-#define VAL_IOPORT1_SEL1 0x0300
-#define VAL_IOPORT1_IES 0x0000
-#define VAL_IOPORT1_IE 0x0000
-
-/*
- * Port B setup:
- *
- * P3.0 - BoosterPack BP18 (input pullup)
- * P3.1 - N/C (input pullup)
- * P3.2 - N/C (input pullup)
- * P3.3 - N/C (input pullup)
- * P3.4 - BoosterPack BP8 (input pullup)
- * P3.5 - BoosterPack BP9 (input pullup)
- * P3.6 - BoosterPack BP10 (input pullup)
- * P3.7 - N/C (input pullup)
- * P4.0 - Application UART CTS (input pullup)
- * P4.1 - Application UART RTS (output high)
- * P4.2 - BoosterPack BP2 (input pullup)
- * P4.3 - BoosterPack BP5 (input pullup)
- * P4.4 - N/C (input pullup)
- * P4.5 - Switch S1 (input pullup)
- * P4.6 - Red LED (output low)
- * P4.7 - N/C (input pullup)
- */
-#define VAL_IOPORT2_OUT 0xBFFF
-#define VAL_IOPORT2_DIR 0x4200
-#define VAL_IOPORT2_REN 0xBDFF
-#define VAL_IOPORT2_SEL0 0x0000
-#define VAL_IOPORT2_SEL1 0x0000
-#define VAL_IOPORT2_IES 0x0000
-#define VAL_IOPORT2_IE 0x0000
-
-/*
- * Port J setup:
- *
- * PJ.0 - TDO (input pullup)
- * PJ.1 - TDI (input pullup)
- * PJ.2 - TMS (input pullup)
- * PJ.3 - TCK (input pullup)
- * PJ.4 - LFXIN (alternate 1)
- * PJ.5 - LFXOUT (alternate 1)
- * PJ.6 - HFXIN (N/C) (input pullup)
- * PJ.7 - HFXOUT (N/C) (input pullup)
- */
-#define VAL_IOPORT0_OUT 0x00FF
-#define VAL_IOPORT0_DIR 0x0000
-#define VAL_IOPORT0_REN 0x00CF
-#define VAL_IOPORT0_SEL0 0x0030
-#define VAL_IOPORT0_SEL1 0x0000
-#define VAL_IOPORT0_IES 0x0000
-#define VAL_IOPORT0_IE 0x0000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
|