diff options
Diffstat (limited to 'ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989')
3 files changed, 0 insertions, 274 deletions
diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c deleted file mode 100644 index a6836cf..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.c +++ /dev/null @@ -1,52 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "hal.h"
-
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
- {VAL_IOPORT1_OUT, VAL_IOPORT1_DIR, VAL_IOPORT1_REN, VAL_IOPORT1_SEL0,
- VAL_IOPORT1_SEL1, VAL_IOPORT1_IES, VAL_IOPORT1_IE},
- {VAL_IOPORT2_OUT, VAL_IOPORT2_DIR, VAL_IOPORT2_REN, VAL_IOPORT2_SEL0,
- VAL_IOPORT2_SEL1, VAL_IOPORT2_IES, VAL_IOPORT2_IE},
- {VAL_IOPORT3_OUT, VAL_IOPORT3_DIR, VAL_IOPORT3_REN, VAL_IOPORT3_SEL0,
- VAL_IOPORT3_SEL1, VAL_IOPORT3_IES, VAL_IOPORT3_IE},
- {VAL_IOPORT4_OUT, VAL_IOPORT4_DIR, VAL_IOPORT4_REN, VAL_IOPORT4_SEL0,
- VAL_IOPORT4_SEL1, VAL_IOPORT4_IES, VAL_IOPORT4_IE},
- {VAL_IOPORT5_OUT, VAL_IOPORT5_DIR, VAL_IOPORT5_REN, VAL_IOPORT5_SEL0,
- VAL_IOPORT5_SEL1, VAL_IOPORT5_IES, VAL_IOPORT5_IE},
- {VAL_IOPORT0_OUT, VAL_IOPORT0_DIR, VAL_IOPORT0_REN, VAL_IOPORT0_SEL0,
- VAL_IOPORT0_SEL1, VAL_IOPORT0_IES, VAL_IOPORT0_IE}
-}; /* Set UART TX pin correctly */
-#endif /* HAL_USE_PAL */
-
-/**
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
- /*
- * External interrupts setup, all disabled initially.
- */
- _disable_interrupts();
-
-}
diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h deleted file mode 100644 index 83b8fbb..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.h +++ /dev/null @@ -1,217 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the EXP430FR6989 LaunchPad board
- */
-
-/* NOTE: LCD segment pins configured as unused - controlled by LCD driver if
- * present
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_EXP430FR6989
-#define BOARD_NAME "MSP430FR6989 LaunchPad"
-
-/*
- * IO lines assignments.
- */
-#define LINE_LED_R PAL_LINE(IOPORT1, 0U)
-#define LINE_LED_G PAL_LINE(IOPORT5, 7U)
-#define LINE_SW_S1 PAL_LINE(IOPORT1, 1U)
-#define LINE_SW_S2 PAL_LINE(IOPORT1, 2U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the MSP430X Family Users Guide for details.
- */
-/*
- * Port A setup:
- *
- * P1.0 - Red LED (output low)
- * P1.1 - Switch S1 (input pullup falling-edge interrupt)
- * P1.2 - Switch S2 (input pullup falling-edge interrupt)
- * P1.3 - BoosterPack BP34 (input pullup)
- * P1.4 - BoosterPack BP7 (input pullup)
- * P1.5 - BoosterPack BP18 (input pullup)
- * P1.6 - BoosterPack BP15 (input pullup)
- * P1.7 - BoosterPack BP14 (input pullup)
- * P2.0 - BoosterPack BP8 (input pullup)
- * P2.1 - BoosterPack BP19 (input pullup)
- * P2.2 - BoosterPack BP35 (input pullup)
- * P2.3 - BoosterPack BP31 (input pullup)
- * P2.4 - BoosterPack BP12 (input pullup)
- * P2.5 - BoosterPack BP13 (input pullup)
- * P2.6 - BoosterPack BP39 (input pullup)
- * P2.7 - BoosterPack BP40 (input pullup)
- */
-#define VAL_IOPORT1_OUT 0xFFFE
-#define VAL_IOPORT1_DIR 0x0001
-#define VAL_IOPORT1_REN 0xFFFE
-#define VAL_IOPORT1_SEL0 0x0000
-#define VAL_IOPORT1_SEL1 0x0000
-#define VAL_IOPORT1_IES 0x0006
-#define VAL_IOPORT1_IE 0x0006
-
-/*
- * Port B setup:
- *
- * P3.0 - BoosterPack BP33 (input pullup)
- * P3.1 - BoosterPack BP32 (input pullup)
- * P3.2 - BoosterPack BP5 (input pullup)
- * P3.3 - BoosterPack BP38 (input pullup)
- * P3.4 - Application UART TX (alternate 1)
- * P3.5 - Application UART RX (alternate 1)
- * P3.6 - BoosterPack BP37 (input pullup)
- * P3.7 - BoosterPack BP36 (input pullup)
- * P4.0 - BoosterPack BP10 (input pullup)
- * P4.1 - BoosterPack BP9 (input pullup)
- * P4.2 - BoosterPack BP4 (input pullup)
- * P4.3 - BoosterPack BP3 (input pullup)
- * P4.4 - LCD S8 (input pullup)
- * P4.5 - LCD S7 (input pullup)
- * P4.6 - LCD S6 (input pullup)
- * P4.7 - BoosterPack BP11 (input pullup)
- */
-#define VAL_IOPORT2_OUT 0xFFCF
-#define VAL_IOPORT2_DIR 0x0000
-#define VAL_IOPORT2_REN 0xFFCF
-#define VAL_IOPORT2_SEL0 0x0030
-#define VAL_IOPORT2_SEL1 0x0000
-#define VAL_IOPORT2_IES 0x0000
-#define VAL_IOPORT2_IE 0x0000
-
-/*
- * Port C setup:
- *
- * P5.0 - LCD S38 (input pullup)
- * P5.1 - LCD S37 (input pullup)
- * P5.2 - LCD S36 (input pullup)
- * P5.3 - LCD S35 (input pullup)
- * P5.4 - LCD S12 (input pullup)
- * P5.5 - LCD S11 (input pullup)
- * P5.6 - LCD S10 (input pullup)
- * P5.7 - LCD S9 (input pullup)
- * P6.0 - LCD R23 (input pullup)
- * P6.1 - LCD R13 (input pullup)
- * P6.2 - LCD R03 (input pullup)
- * P6.3 - LCD COM0 (input pullup)
- * P6.4 - LCD COM1 (input pullup)
- * P6.5 - LCD COM2 (input pullup)
- * P6.6 - LCD COM3 (input pullup)
- * P6.7 - LCD S31 (input pullup)
- */
-#define VAL_IOPORT3_OUT 0xFFFF
-#define VAL_IOPORT3_DIR 0x0000
-#define VAL_IOPORT3_REN 0xFFFF
-#define VAL_IOPORT3_SEL0 0x0000
-#define VAL_IOPORT3_SEL1 0x0000
-#define VAL_IOPORT3_IES 0x0000
-#define VAL_IOPORT3_IE 0x0000
-
-/*
- * Port D setup:
- *
- * P7.0 - LCD S17 (input pullup)
- * P7.1 - LCD S16 (input pullup)
- * P7.2 - LCD S15 (input pullup)
- * P7.3 - LCD S14 (input pullup)
- * P7.4 - LCD S13 (input pullup)
- * P7.5 - LCD S30 (input pullup)
- * P7.6 - LCD S29 (input pullup)
- * P7.7 - LCD S27 (input pullup)
- * P8.0 - LCD S21 (input pullup)
- * P8.1 - LCD S20 (input pullup)
- * P8.2 - LCD S19 (input pullup)
- * P8.3 - LCD S18 (input pullup)
- * P8.4 - BoosterPack BP23 (input pullup)
- * P8.5 - BoosterPack BP24 (input pullup)
- * P8.6 - BoosterPack BP25 (input pullup)
- * P8.7 - BoosterPack BP26 (input pullup)
- */
-#define VAL_IOPORT4_OUT 0xFFFF
-#define VAL_IOPORT4_DIR 0x0000
-#define VAL_IOPORT4_REN 0xFFFF
-#define VAL_IOPORT4_SEL0 0x0000
-#define VAL_IOPORT4_SEL1 0x0000
-#define VAL_IOPORT4_IES 0x0000
-#define VAL_IOPORT4_IE 0x0000
-
-/*
- * Port D setup:
- *
- * P9.0 - BoosterPack BP27 (input pullup)
- * P9.1 - BoosterPack BP28 (input pullup)
- * P9.2 - BoosterPack BP2 (input pullup)
- * P9.3 - BoosterPack BP6 (input pullup)
- * P9.4 - BoosterPack BP17 (input pullup)
- * P9.5 - BoosterPack BP29 (input pullup)
- * P9.6 - BoosterPack BP30 (input pullup)
- * P9.7 - Green LED (output low)
- * P10.0 - LCD S4 (input pullup)
- * P10.1 - LCD S28 (input pullup)
- * P10.2 - LCD S39 (input pullup)
- * P10.3 - N/C Internally (input pullup)
- * P10.4 - N/C Internally (input pullup)
- * P10.5 - N/C Internally (input pullup)
- * P10.6 - N/C Internally (input pullup)
- * P10.7 - N/C Internally (input pullup)
- */
-#define VAL_IOPORT5_OUT 0xFF7F
-#define VAL_IOPORT5_DIR 0x0080
-#define VAL_IOPORT5_REN 0xFF7F
-#define VAL_IOPORT5_SEL0 0x0000
-#define VAL_IOPORT5_SEL1 0x0000
-#define VAL_IOPORT5_IES 0x0000
-#define VAL_IOPORT5_IE 0x0000
-
-/*
- * Port J setup:
- *
- * PJ.0 - TDO (input pullup)
- * PJ.1 - TDI (input pullup)
- * PJ.2 - TMS (input pullup)
- * PJ.3 - TCK (input pullup)
- * PJ.4 - LFXIN (alternate 1)
- * PJ.5 - LFXOUT (alternate 1)
- * PJ.6 - HFXIN (N/C) (input pullup)
- * PJ.7 - HFXOUT (N/C) (input pullup)
- */
-#define VAL_IOPORT0_OUT 0x00FF
-#define VAL_IOPORT0_DIR 0x0000
-#define VAL_IOPORT0_REN 0x00CF
-#define VAL_IOPORT0_SEL0 0x0030
-#define VAL_IOPORT0_SEL1 0x0000
-#define VAL_IOPORT0_IES 0x0000
-#define VAL_IOPORT0_IE 0x0000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk deleted file mode 100644 index ea1c237..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR6989/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR6989/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR6989
|