1 files changed, 0 insertions, 128 deletions
diff --git a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c b/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c
deleted file mode 100644
index 8d24d02..0000000
--- a/ChibiOS_16.1.5/community/testhal/NRF51/NRF51822/EXT/main.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-    Copyright (C) 2015 Stephen Caudle
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#ifndef DEBOUNCE_TIME
-#define DEBOUNCE_TIME 100
-#endif
-
-static virtual_timer_t vt1;
-static virtual_timer_t vt2;
-static bool debouncing1;
-static bool debouncing2;
-
-/* LED1 toggled after debounce.*/
-static void led1toggle(void *arg) {
-
-  (void)arg;
-  palTogglePad(IOPORT1, LED1);
-  debouncing1 = false;
-}
-
-/* LED2 toggled after debounce.*/
-static void led2toggle(void *arg) {
-
-  (void)arg;
-  palTogglePad(IOPORT1, LED2);
-  debouncing2 = false;
-}
-
-static void extcb1(EXTDriver *extp, expchannel_t channel)
-{
-  (void)extp;
-  (void)channel;
-
-  uint8_t pad1 = palReadPad(IOPORT1, KEY1);
-
-  if (!debouncing1 && (pad1 == PAL_LOW)) {
-    debouncing1 = true;
-    chSysLockFromISR();
-    chVTSetI(&vt1, MS2ST(DEBOUNCE_TIME), led1toggle, NULL);
-    chSysUnlockFromISR();
-  } else if (debouncing1 && (pad1 == PAL_HIGH)) {
-    chSysLockFromISR();
-    if (chVTIsArmedI(&vt1))
-      chVTResetI(&vt1);
-    chSysUnlockFromISR();
-    debouncing1 = false;
-  }
-}
-
-static void extcb2(EXTDriver *extp, expchannel_t channel)
-{
-  (void)extp;
-  (void)channel;
-
-  uint8_t pad2 = palReadPad(IOPORT1, KEY2);
-
-  if (!debouncing2 && (pad2 == PAL_LOW)) {
-    debouncing2 = true;
-    chSysLockFromISR();
-    chVTSetI(&vt2, MS2ST(DEBOUNCE_TIME), led2toggle, NULL);
-    chSysUnlockFromISR();
-  } else if (debouncing2 && (pad2 == PAL_HIGH)) {
-    chSysLockFromISR();
-    if (chVTIsArmedI(&vt2))
-      chVTResetI(&vt2);
-    chSysUnlockFromISR();
-    debouncing2 = false;
-  }
-}
-
-static const EXTConfig extcfg =
-{
-  {
-    {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART | (KEY1 << EXT_MODE_GPIO_OFFSET), extcb1},
-    {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART | (KEY2 << EXT_MODE_GPIO_OFFSET), extcb2},
-  }
-};
-
-/*
- * Application entry point.
- */
-int main(void)
-{
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  extStart(&EXTD1, &extcfg);
-
-  /*
-   * Normal main() thread activity, in this demo it enables and disables the
-   * button EXT channel using 5 seconds intervals.
-   */
-  while (TRUE) {
-    palSetPad(IOPORT1, LED0);
-    chThdSleepMilliseconds(5000);
-    extChannelDisable(&EXTD1, 0);
-    extChannelDisable(&EXTD1, 1);
-    palClearPad(IOPORT1, LED0);
-    chThdSleepMilliseconds(5000);
-    extChannelEnable(&EXTD1, 0);
-    extChannelEnable(&EXTD1, 1);
-  }
-
-  return 0;
-}