diff options
Diffstat (limited to 'ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc')
10 files changed, 0 insertions, 1754 deletions
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject deleted file mode 100644 index 83bd4ce..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.cproject +++ /dev/null @@ -1,49 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> - <storageModule moduleId="org.eclipse.cdt.core.settings"> - <cconfiguration id="0.1907870227"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1907870227" moduleId="org.eclipse.cdt.core.settings" name="Default"> - <externalSettings/> - <extensions> - <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - </extensions> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration buildProperties="" description="" id="0.1907870227" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> - <folderInfo id="0.1907870227." name="/" resourcePath=""> - <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.2147369392" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> - <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.2147369392.1404159771" name=""/> - <builder id="org.eclipse.cdt.build.core.settings.default.builder.556284602" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.libs.7290094" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.1820285415" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.10251564" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.2066745879" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.371720077" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.300050755" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.705907565" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - </toolChain> - </folderInfo> - </configuration> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> - </cconfiguration> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <project id="STM32F0xx-crc.null.669124853" name="STM32F0xx-crc"/> - </storageModule> - <storageModule moduleId="scannerConfiguration"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> - <scannerConfigBuildInfo instanceId="0.1907870227"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> - </scannerConfigBuildInfo> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> -</cproject> diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project deleted file mode 100644 index deaa743..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/.project +++ /dev/null @@ -1,27 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<projectDescription> - <name>STM32F0xx-crc</name> - <comment></comment> - <projects> - </projects> - <buildSpec> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> - <triggers>clean,full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> - <triggers>full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - </buildSpec> - <natures> - <nature>org.eclipse.cdt.core.cnature</nature> - <nature>org.eclipse.cdt.core.ccnature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> - </natures> -</projectDescription> diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile deleted file mode 100644 index 24f660a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/Makefile +++ /dev/null @@ -1,214 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x200
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c \
- $(CHIBIOS_CONTRIB)/os/various/crcsw.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various \
- $(CHIBIOS_CONTRIB)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h deleted file mode 100644 index c2d6f04..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/chconf.h +++ /dev/null @@ -1,520 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 32
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 10000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS TRUE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS TRUE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS TRUE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h deleted file mode 100644 index 6e2d3c7..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf.h +++ /dev/null @@ -1,347 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h deleted file mode 100644 index 2bc41bf..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/halconf_community.h +++ /dev/null @@ -1,118 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
-
-/**
- * @brief Enables the community overlay.
- */
-#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)
-#define HAL_USE_COMMUNITY TRUE
-#endif
-
-/**
- * @brief Enables the FSMC subsystem.
- */
-#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)
-#define HAL_USE_FSMC FALSE
-#endif
-
-/**
- * @brief Enables the NAND subsystem.
- */
-#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)
-#define HAL_USE_NAND FALSE
-#endif
-
-/**
- * @brief Enables the 1-wire subsystem.
- */
-#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)
-#define HAL_USE_ONEWIRE FALSE
-#endif
-
-/**
- * @brief Enables the EICU subsystem.
- */
-#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)
-#define HAL_USE_EICU FALSE
-#endif
-
-/**
- * @brief Enables the CRC subsystem.
- */
-#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)
-#define HAL_USE_CRC TRUE
-#endif
-
-/**
- * @brief Enables the RNG subsystem.
- */
-#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
-#define HAL_USE_RNG FALSE
-#endif
-
-/*===========================================================================*/
-/* FSMCNAND driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define NAND_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* 1-wire driver related settings. */
-/*===========================================================================*/
-/**
- * @brief Enables strong pull up feature.
- * @note Disabling this option saves both code and data space.
- */
-#define ONEWIRE_USE_STRONG_PULLUP FALSE
-
-/**
- * @brief Enables search ROM feature.
- * @note Disabling this option saves both code and data space.
- */
-#define ONEWIRE_USE_SEARCH_ROM TRUE
-
-/*===========================================================================*/
-/* CRC driver settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables DMA engine when performing CRC transactions.
- * @note Enabling this option also enables asynchronous API.
- */
-#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__)
-#define CRC_USE_DMA FALSE
-#endif
-
-/**
- * @brief Enables the @p crcAcquireUnit() and @p crcReleaseUnit() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define CRC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_COMMUNITY_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c deleted file mode 100644 index 6da0808..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/main.c +++ /dev/null @@ -1,244 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-
-/*
- * Data used for CRC calculation.
- */
-uint8_t data[] = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
- 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
- 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f
-};
-
-uint32_t gCrc = 0;
-
-
-/*
- * CRC Callback used with DMA testing
- */
-void crc_callback(CRCDriver *crcp, uint32_t crc) {
- (void)crcp;
- gCrc = crc;
-}
-
-
-/*
- * CRC32 configuration
- */
-static const CRCConfig crc32_config = {
- .poly_size = 32,
- .poly = 0x04C11DB7,
- .initial_val = 0xFFFFFFFF,
- .final_val = 0xFFFFFFFF,
- .reflect_data = 1,
- .reflect_remainder = 1
-};
-
-/*
- * CRC16 configuration
- */
-static const CRCConfig crc16_config = {
- .poly_size = 16,
- .poly = 0x8005,
- .initial_val = 0x0,
- .final_val = 0x0,
- .reflect_data = 1,
- .reflect_remainder = 1
-};
-
-/*
- * CRC OpenPGP
- */
-static const CRCConfig crc8_config = {
- .poly_size = 8,
- .poly = 0x07,
- .initial_val = 0x0,
- .final_val = 0x0,
- .reflect_data = 0,
- .reflect_remainder = 0
-};
-
-
-#if CRC_USE_DMA == TRUE
-/*
- * CRC32 configuration with DMA
- */
-static const CRCConfig crc32_dma_config = {
- .poly_size = 32,
- .poly = 0x04C11DB7,
- .initial_val = 0xFFFFFFFF,
- .final_val = 0xFFFFFFFF,
- .reflect_data = 1,
- .reflect_remainder = 1,
- .end_cb = crc_callback
-};
-
-/*
- * CRC16 configuration with DMA
- */
-static const CRCConfig crc16_dma_config = {
- .poly_size = 16,
- .poly = 0x8005,
- .initial_val = 0x0,
- .final_val = 0x0,
- .reflect_data = 1,
- .reflect_remainder = 1,
- .end_cb = crc_callback
-};
-#endif
-
-
-static void testCrc(const CRCConfig *config, uint32_t result) {
- uint32_t crc;
-
- crcAcquireUnit(&CRCD1); /* Acquire ownership of the bus. */
- crcStart(&CRCD1, config); /* Activate CRC driver */
- crcReset(&CRCD1);
- crc = crcCalc(&CRCD1, sizeof(data), &data);
- osalDbgAssert(crc == result, "CRC does not match expected result");
- crcStop(&CRCD1); /* Deactive CRC driver); */
- crcReleaseUnit(&CRCD1); /* Acquire ownership of the bus. */
-}
-
-
-#if CRC_USE_DMA
-static void testCrcDma(const CRCConfig *config, uint32_t result) {
- gCrc = 0;
-
- crcAcquireUnit(&CRCD1); /* Acquire ownership of the bus. */
- crcStart(&CRCD1, config); /* Activate CRC driver */
- crcReset(&CRCD1);
- crcStartCalc(&CRCD1, sizeof(data), &data);
- while (gCrc == 0); /* Wait for callback to verify */
- crcStop(&CRCD1); /* Deactive CRC driver); */
- crcReleaseUnit(&CRCD1); /* Acquire ownership of the bus. */
-
- osalDbgAssert(gCrc == result, "CRC does not match expected result");
-}
-#endif
-
-/*
- * CRC thread
- */
-static THD_WORKING_AREA(crc_thread_1_wa, 256);
-static THD_FUNCTION(crc_thread_1, p) {
- (void)p;
- chRegSetThreadName("CRC thread 1");
- while (true) {
-
-/* Test ST hardware CRC */
-/* if CRC_USE_DMA == TRUE these sync function internally use DMA and put the
- * calling thread to sleep */
-#if STM32_CRC_USE_CRC1 == TRUE
- /* CRC32 Calculation */
- testCrc(&crc32_config, 0x91267e8a);
- /* CRC16 Calculation */
- testCrc(&crc16_config, 0xc36a);
- /* CRC8 Calculation */
- testCrc(&crc8_config, 0x06);
-
-/* Test ST CRC with DMA */
-#if CRC_USE_DMA == TRUE
- /* CRC32 Calculation */
- testCrcDma(&crc32_dma_config, 0x91267e8a);
- /* CRC16 Calculation */
- testCrcDma(&crc16_dma_config, 0xc36a);
-#endif
-
-#endif /* STM32_CRC_USE_CRC1 */
-
-
-/* Test software CRC */
-#if CRCSW_USE_CRC1 == TRUE
-/* Test CRCSW with compute CRC */
-#if CRCSW_PROGRAMMABLE == TRUE
- /* CRC32 Calculation */
- testCrc(&crc32_config, 0x91267e8a);
- /* CRC16 Calculation */
- testCrc(&crc16_config, 0xc36a);
- testCrc(&crc8_config, 0x06);
-#endif
-/* Test CRCSW with table lookups. */
-#if CRCSW_CRC32_TABLE == TRUE
- /* CRC32 Calculation with table lookup */
- testCrc(CRCSW_CRC32_TABLE_CONFIG, 0x91267e8a);
-#endif
-#if CRCSW_CRC16_TABLE == TRUE
- /* CRC16 Calculation with table lookup */
- testCrc(CRCSW_CRC16_TABLE_CONFIG, 0xc36a);
-#endif
-
-#endif /* CRCSW_USE_CRC1 */
- }
-}
-
-
-/*
- * Red LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
- chRegSetThreadName("blinker");
- while (true) {
- palClearPad(GPIOC, GPIOC_LED_RED);
- chThdSleepMilliseconds(500);
- palSetPad(GPIOC, GPIOC_LED_RED);
- chThdSleepMilliseconds(500);
- }
-}
-
-
-/*
- * Application entry point.
- */
-int main(void) {
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Creates the blinker thread.
- */
- chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
- /*
- * Starting the CRC thread
- */
- chThdCreateStatic(crc_thread_1_wa, sizeof(crc_thread_1_wa),
- NORMALPRIO + 1, crc_thread_1, NULL);
-
- /*
- * Normal main() thread activity, in this demo it does nothing.
- */
- while (true) {
- chThdSleepMilliseconds(500);
- }
-
- return 0;
-}
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h deleted file mode 100644 index ad184cd..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf.h +++ /dev/null @@ -1,166 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_HSI14_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED FALSE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 12
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE STM32_PPRE_DIV1
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_CECSW STM32_CECSW_HSI
-#define STM32_I2C1SW STM32_I2C1SW_HSI
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 3
-#define STM32_SERIAL_USART2_PRIORITY 3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 2
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 3
-#define STM32_UART_USART2_IRQ_PRIORITY 3
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h deleted file mode 100644 index 8df78ec..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/mcuconf_community.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2015 Michael D. Spradling - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_COMMUNITY_H_ -#define _MCUCONF_COMMUNITY_H_ - -/* - * CRC driver system settings. - */ -#define STM32_CRC_USE_CRC1 TRUE -#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 -#define STM32_CRC_CRC1_DMA_PRIORITY 2 -#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 - -#define CRCSW_USE_CRC1 FALSE -#define CRCSW_CRC32_TABLE TRUE -#define CRCSW_CRC16_TABLE TRUE -#define CRCSW_PROGRAMMABLE TRUE - -#endif diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt deleted file mode 100644 index b10413a..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F0xx/crc/readme.txt +++ /dev/null @@ -1,36 +0,0 @@ -*****************************************************************************
-** ChibiOS/HAL - CRC driver demo for STM32F0xx (also sw driver) **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an ST STM32F0-Discovery board.
-
-** The Demo **
-
-The application demonstrates the use of the STM32F0xx CRC driver. There are
-many different ways to configure and setup the CRC. This demo has be
-configured to test the following:
- * ST hardware block configured with CRC32 with or without DMA
- * ST hardware block configured with CRC16 with or without DMA
- * Software CRC32
- * Software CRC16
-
-** Board Setup **
-
-- No requirements
-
-** Build Procedure **
-
-The demo has been tested using the free Codesourcery GCC-based toolchain
-and YAGARTO.
-Just modify the TRGT line in the makefile in order to use different GCC ports.
-
-** Notes **
-
-Some files used by the demo are not part of ChibiOS/RT but are copyright of
-ST Microelectronics and are licensed under a different license.
-Also note that not all the files present in the ST library are distributed
-with ChibiOS/RT, you can find the whole library on the ST web site:
-
- http://www.st.com
|