1 files changed, 0 insertions, 99 deletions
diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c b/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c
deleted file mode 100644
index 130a600..0000000
--- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F3xx/EEProm/main.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#define EEPROM_SIZE 8192 // 64Kb, 8KB
-#define EEPROM_PAGE_SIZE 32
-#define EEPROM_WRITE_TIME_MS 10 // byte/page write time
-#define EEPROM_SPID SPID1
-#define EEPROM_SPIDCONFIG spi1cfg
-
-static const SPIConfig EEPROM_SPIDCONFIG = {
-  NULL,
-  GPIOA,
-  12,
-  0, // Up to 20Mhz
-  SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0
-};
-
-static SPIEepromFileConfig eeCfg = {
-  0,
-  EEPROM_SIZE,
-  EEPROM_SIZE,
-  EEPROM_PAGE_SIZE,
-  MS2ST(EEPROM_WRITE_TIME_MS),
-  &EEPROM_SPID,
-  &EEPROM_SPIDCONFIG,
-};
-
-static SPIEepromFileStream eeFile;
-static EepromFileStream *eeFS;
-
-static uint8_t buffer[64];
-
-THD_WORKING_AREA(waThreadEE, 256);
-static THD_FUNCTION(ThreadEE, arg)
-{
-  (void)arg;
-  uint8_t len = 64;
-
-  while (TRUE)
-  {
-
-    eeFS = SPIEepromFileOpen(&eeFile, &eeCfg, EepromFindDevice(EEPROM_DEV_25XX));
-    fileStreamSeek(eeFS, 0);
-
-    fileStreamWrite(eeFS, buffer, len);
-    fileStreamRead(eeFS, buffer, len);
-
-    fileStreamClose(eeFS);
-
-    chThdSleepMilliseconds(500);
-  }
-
-  return;
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  spiStart(&EEPROM_SPID, &EEPROM_SPIDCONFIG);
-
-  chThdCreateStatic(waThreadEE, sizeof(waThreadEE), NORMALPRIO, ThreadEE, NULL);
-
-  /*
-   * Normal main() thread activity, it resets the watchdog.
-   */
-  while (true) {
-    palToggleLine(LINE_LED4_BLUE);
-    chThdSleepMilliseconds(500);
-  }
-  return 0;
-}