1 files changed, 0 insertions, 97 deletions
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/main.c b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/main.c
deleted file mode 100644
index b01c191..0000000
--- a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/main.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "test.h"
-
-#define BOTH_BUTTONS (PAL_PORT_BIT(PA_BUTTON1) | PAL_PORT_BIT(PA_BUTTON2))
-
-/*
- * Red LEDs blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker1");
-  while (true) {
-    palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED2));
-    chThdSleepMilliseconds(200);
-    palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
-    chThdSleepMilliseconds(800);
-    palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED1));
-    chThdSleepMilliseconds(200);
-    palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
-    chThdSleepMilliseconds(800);
-  }
-}
-
-/*
- * Yellow LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread2, 128);
-static THD_FUNCTION(Thread2, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker2");
-  while (true) {
-    palClearPad(IOPORT1, PA_LEDUSB);
-    chThdSleepMilliseconds(200);
-    palSetPad(IOPORT1, PA_LEDUSB);
-    chThdSleepMilliseconds(300);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Activates the serial driver 1 using the driver default configuration.
-   */
-  sdStart(&SD1, NULL);
-
-  /*
-   * Creating blinkers threads.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing except
-   * sleeping in a loop and check the buttons state and run test procedure.
-   */
-  while (true) {
-    if (!palReadPad(IOPORT1, PA_BUTTON1))
-      sdWrite(&SD1, (uint8_t *)"Hello World!\r\n", 14);
-    if (!palReadPad(IOPORT1, PA_BUTTON2))
-      TestThread(&SD1);
-    chThdSleepMilliseconds(500);
-  }
-  return 0;
-}