1 files changed, 0 insertions, 30 deletions
diff --git a/ChibiOS_16.1.5/testhal/AVR/PWM/readme.txt b/ChibiOS_16.1.5/testhal/AVR/PWM/readme.txt
deleted file mode 100644
index 8544930..0000000
--- a/ChibiOS_16.1.5/testhal/AVR/PWM/readme.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*****************************************************************************
-** ChibiOS/RT and NIL PWM demos for Atmel AVR ATmega1280.                  **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Arduino Mega board.
-
-** The Demo **
-
-This demo creates three PWM channels on pins PB5, PB6 and PB7. Each channel uses
-a different duty cycle with PB7 having a duty cycle of 50%, PB6 a duty cycle of
-25% and PB5 a duty cycle of 75%. Since the LED is connected to PB7 on the Arduino
-Mega, it can be seen flashing in high speed.
-
-** Build Procedure **
-
-The demo was built using the GCC AVR toolchain.
-To build linking with ChibiOS:
-
-$ make -f Makefile.ch
-
-To build linking with NIL:
-
-$ make -f Makefile.nil
-
-** Notes **
-
-This demo runs natively so the Arduino bootloader must be removed and the FUSEs
-reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.