linux-486/README.md

linux-486

This repo provides the files necessary to build a modern Linux-based "operating system" for old i486 systems with at least 8MB of RAM. Build scripts for all components of the system are provided. An i486-linux toolchain is also built, enabling you to compile other programs for use with the system.

The generated boot floppy disk provides you with a Busybox system that is kept entirely in memory. uClibc's shared library files are also loaded into memory, allowing other programs to save on memory (as opposed to using static binaries).

A second floppy containing additional kernel modules can also be generated. Both floppies are ext2 formatted.

Build requirements

• building tools (make, gcc, linux kernel's requirements, etc.)
• bash
• wget
• tar, xz, bzip2
• Around 6GB of available disk space

Build steps

Run the build scripts in this order:

1. build-toolchain.sh (after this script, add ~/i486-linux/bin to your PATH)
2. build-linux.sh
3. build-busybox.sh
4. build-floppy.sh
5. build-modules.sh

On my machine (Ryzen 1700x, 16GB RAM), building the toolchain takes around ten minutes; building Linux takes around a minute, and the remaining steps take less than a minute each.

After successful execution of all scripts, you should have floppy.img (boot image) and modules.img (modules). These can be dd'd to a 1.44M 3.5" floppy disk.

Booting the system

The system requires an i486 or better processor, a 3.5" floppy drive, and at least 8MB of RAM (8320K for QEMU).

Notes:

• Once the system is booted, the boot floppy can be removed.
• root's password is toor.
• Mount the modules floppy to /lib/modules; then, use modprobe for loading and unloading.