tar'd chibi

1 files changed, 0 insertions, 85 deletions

diff --git a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c b/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c
deleted file mode 100644
index 9bae7ab..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/WVSHARE_BLE400/board.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-    Copyright (C) 2015 Fabio Utzig
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
-  .pads = {
-        PAL_MODE_OUTPUT_OPENDRAIN,    /* P0.0:  SDA      */
-        PAL_MODE_OUTPUT_OPENDRAIN,    /* P0.1:  SCL      */
-        PAL_MODE_UNCONNECTED,         /* P0.2 */
-        PAL_MODE_UNCONNECTED,         /* P0.3 */
-        PAL_MODE_UNCONNECTED,         /* P0.4 */
-        PAL_MODE_UNCONNECTED,         /* P0.5 */
-        PAL_MODE_UNCONNECTED,         /* P0.6 */
-        PAL_MODE_UNCONNECTED,         /* P0.7 */
-        PAL_MODE_UNCONNECTED,         /* P0.8   UART_RTS */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.9:  UART_TX  */
-        PAL_MODE_UNCONNECTED,         /* P0.10  UART_CTS */
-        PAL_MODE_INPUT_PULLUP,        /* P0.11: UART_RX  */
-        PAL_MODE_UNCONNECTED,         /* P0.12 */
-        PAL_MODE_UNCONNECTED,         /* P0.13 */
-        PAL_MODE_UNCONNECTED,         /* P0.14 */
-        PAL_MODE_UNCONNECTED,         /* P0.15 */
-        PAL_MODE_INPUT_PULLUP,        /* P0.16: KEY1     */
-        PAL_MODE_INPUT_PULLUP,        /* P0.17: KEY2     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.18: LED0     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.19: LED1     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.20: LED2     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.21: LED3     */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.22: LED4     */
-        PAL_MODE_INPUT,               /* P0.23: SPI_MISO */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.24: SPI_MOSI */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.25: SPI_SCK  */
-        PAL_MODE_UNCONNECTED,         /* P0.26 */
-        PAL_MODE_UNCONNECTED,         /* P0.27 */
-        PAL_MODE_UNCONNECTED,         /* P0.28 */
-        PAL_MODE_UNCONNECTED,         /* P0.29 */
-        PAL_MODE_OUTPUT_PUSHPULL,     /* P0.30: SPI_NSS  */
-        PAL_MODE_UNCONNECTED,         /* P0.31 */
-  },
-};
-#endif
-
-/**
- * @brief   Early initialization code.
- * @details This initialization is performed just after reset before BSS and
- *          DATA segments initialization.
- */
-void __early_init(void)
-{
-}
-
-/**
- * @brief   Late initialization code.
- * @note    This initialization is performed after BSS and DATA segments
- *          initialization and before invoking the main() function.
- */
-void boardInit(void)
-{
-  //FIXME: not really needed yet
-  //NRF_CLOCK->XTALFREQ = 0xff;
-  //NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
-  //NRF_CLOCK->TASKS_HFCLKSTART = 1;
-  //while (!NRF_CLOCK->EVENTS_HFCLKSTARTED) {}
-}