tar'd chibi

3 files changed, 0 insertions, 180 deletions

diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c
deleted file mode 100644
index ac48ba0..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*

-    ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config =

-{

-  {VAL_IOPORT1_OUT, VAL_IOPORT1_DIR, VAL_IOPORT1_REN, VAL_IOPORT1_SEL0, 

-    VAL_IOPORT1_SEL1, VAL_IOPORT1_IES, VAL_IOPORT1_IE},

-  {VAL_IOPORT2_OUT, VAL_IOPORT2_DIR, VAL_IOPORT2_REN, VAL_IOPORT2_SEL0, 

-    VAL_IOPORT2_SEL1, VAL_IOPORT2_IES, VAL_IOPORT2_IE},

-  {VAL_IOPORT0_OUT, VAL_IOPORT0_DIR, VAL_IOPORT0_REN, VAL_IOPORT0_SEL0, 

-    VAL_IOPORT0_SEL1, VAL_IOPORT0_IES, VAL_IOPORT0_IE}

-}; /* Set UART TX pin correctly */

-#endif /* HAL_USE_PAL */

-

-/**

- * Board-specific initialization code.

- */

-void boardInit(void) {

-

-  /*

-   * External interrupts setup, all disabled initially.

-   */

-  _disable_interrupts();

-

-}

diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h
deleted file mode 100644
index 97103d3..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*

-    ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for the EXP430FR5969 LaunchPad board

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_EXP430FR5959

-#define BOARD_NAME "MSP430FR5969 LaunchPad"

-

-/*

- * IO lines assignments.

- */

-#define LINE_LED_G                                PAL_LINE(IOPORT1, 0U)

-#define LINE_LED_R                                PAL_LINE(IOPORT2, 14U)

-#define LINE_SW_S1                                PAL_LINE(IOPORT2, 13U)

-#define LINE_SW_S2                                PAL_LINE(IOPORT1, 1U)

-

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- * Please refer to the MSP430X Family Users Guide for details.

- */

-/*

- * Port A setup:

- * 

- * P1.0 - Green LED               (output low)

- * P1.1 - Switch S2               (input pullup)

- * P1.2 - BoosterPack BP19        (input pullup)

- * P1.3 - BoosterPack BP11        (input pullup)

- * P1.4 - BoosterPack BP12        (input pullup)

- * P1.5 - BoosterPack BP13        (input pullup)

- * P1.6 - BoosterPack BP15        (input pullup)

- * P1.7 - BoosterPack BP14        (input pullup)

- * P2.0 - Application UART TX     (alternate 2)

- * P2.1 - Application UART RX     (alternate 2)

- * P2.2 - BoosterPack BP7         (input pullup)

- * P2.3 - N/C                     (input pullup)

- * P2.4 - BoosterPack BP6         (input pullup)

- * P2.5 - BoosterPack BP4         (input pullup)

- * P2.6 - BoosterPack BP3         (input pullup)

- * P2.7 - N/C                     (input pullup)

- */

-#define VAL_IOPORT1_OUT   0xFCFE

-#define VAL_IOPORT1_DIR   0x0001

-#define VAL_IOPORT1_REN   0xFCFE

-#define VAL_IOPORT1_SEL0  0x0000

-#define VAL_IOPORT1_SEL1  0x0300

-#define VAL_IOPORT1_IES   0x0000

-#define VAL_IOPORT1_IE    0x0000

-

-/*

- * Port B setup:

- * 

- * P3.0 - BoosterPack BP18        (input pullup)

- * P3.1 - N/C                     (input pullup)

- * P3.2 - N/C                     (input pullup)

- * P3.3 - N/C                     (input pullup)

- * P3.4 - BoosterPack BP8         (input pullup)

- * P3.5 - BoosterPack BP9         (input pullup)

- * P3.6 - BoosterPack BP10        (input pullup)

- * P3.7 - N/C                     (input pullup)

- * P4.0 - Application UART CTS    (input pullup)

- * P4.1 - Application UART RTS    (output high)

- * P4.2 - BoosterPack BP2         (input pullup)

- * P4.3 - BoosterPack BP5         (input pullup)

- * P4.4 - N/C                     (input pullup)

- * P4.5 - Switch S1               (input pullup)

- * P4.6 - Red LED                 (output low)

- * P4.7 - N/C                     (input pullup)

- */

-#define VAL_IOPORT2_OUT   0xBFFF

-#define VAL_IOPORT2_DIR   0x4200

-#define VAL_IOPORT2_REN   0xBDFF

-#define VAL_IOPORT2_SEL0  0x0000

-#define VAL_IOPORT2_SEL1  0x0000

-#define VAL_IOPORT2_IES   0x0000

-#define VAL_IOPORT2_IE    0x0000

-

-/*

- * Port J setup:

- * 

- * PJ.0 - TDO                     (input pullup)

- * PJ.1 - TDI                     (input pullup)

- * PJ.2 - TMS                     (input pullup)

- * PJ.3 - TCK                     (input pullup)

- * PJ.4 - LFXIN                   (alternate 1)

- * PJ.5 - LFXOUT                  (alternate 1)

- * PJ.6 - HFXIN (N/C)             (input pullup)

- * PJ.7 - HFXOUT (N/C)            (input pullup)

- */

-#define VAL_IOPORT0_OUT   0x00FF

-#define VAL_IOPORT0_DIR   0x0000

-#define VAL_IOPORT0_REN   0x00CF

-#define VAL_IOPORT0_SEL0  0x0030

-#define VAL_IOPORT0_SEL1  0x0000

-#define VAL_IOPORT0_IES   0x0000

-#define VAL_IOPORT0_IE    0x0000

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */

diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk
deleted file mode 100644
index c629257..0000000
--- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.

-BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR5969/board.c

-

-# Required include directories

-BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR5969